Manufacturing technician jobs in Cheektowaga, NY

Starting pay is $23.40/hour (plus shift differential, if applicable). Year 2 = $26.74 Year 3 = $28.41 Year 4 = $33.43 First year: $70K+ with overtime. Wage progression over 3 years to a max of $33.43+/hr. With overtime up to $85K+ / year Excellent wages, benefits and product discounts. REPORTS TO: Area Leader/Team Leader SUMMARY: Work in a variety of areas, operating high-speed manufacturing production equipment in processing and packaging to produce Milk-Bone product for the company. KEY RESPONSIBILITIES * Positions are afternoons and evenings and shifts can alternate weekly. Assigned shift attendance and weekend work is required. * Follow all company Safety Rules and Good Manufacturing Practices (GMP's). * Produce high quality products in a safe and healthful manner. * Work in all areas of processing and packaging, as assigned, which includes operating, being in close proximity to and crossing platforms over machinery. Cross-training will occur throughout the facility in all aspects of high-speed manufacturing. * Ability to work as part of a team. * Assist fellow employees as needed. QUALIFICATIONS * To perform this job successfully, an individual must be able to perform each duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the duties and functions of the position. * 3+ years related manufacturing experience or equivalent technical/vocational experience preferred. * Selected individuals must have excellent interpersonal and communication skills, be highly motivated and responsible, and work well within a team environment. * Use of computers and PLCs in an industrial manufacturing environment is preferred. EDUCATION and/or EXPERIENCE High-school degree or equivalent is required. Associate degree preferred. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, GMP's and general instructions. Good communication skills are required. REASONING ABILITY Ability to apply common sense understanding to carry out both oral and written instructions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions and duties of this job. Reasonable accommodations may be made to enable individuals with disabilities. * While performing the duties of this job, the employee is regularly required to stand and lift. The employee is required to stand and walk at minimum 70% of the time. * The employee must be able to work 8-hour shifts with a maximum of 16 hours required. * The employees must be able to lift fifty (50) pounds. * The employee must be able to squat or kneel and to bend on a frequent basis. * The employee must be able to work in a cold and hot environment. * The employee must be able to tolerate exposure to flour and yeast materials. * The employee must be able to climb steps on a frequent basis. SAFE PERFORMANCE REQUIREMENTS Employee must have the ability to perform the essential job functions identified above consistent with safety standards and practices with or without a reasonable accommodation. WORK ENVIRONMENT The work environments characteristics described here are representative of those an employee encounters while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is located in a bakery which is a high temperature environment, especially in the summer months. This position requires you to spend the majority of your shift on your feet and walking. This position is in a loud noise environment and requires the use of hearing protection and other personal protective equipment. #ZR IND123

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers . If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Eaton's IS AER MSD division is currently seeking a Manufacturing Technician III - Actuation. The hours for this role are 7am - 3:30pm The hourly rate for this position is $27.00 - $34.00 per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: Job Summary Eaton's Mission Systems Division is currently seeking a Manufacturing Technician III for its Actuation Team. This position is based at our Orchard Park, NY facility. Manufacturing technicians are responsible for performing assembly and test processes on aerospace hardware. Development of hardware, creating functional test setups, working with various high pressure gases, and initiating engineering collaboration to successfully deliver quality aerospace components and systems. Technicians are responsible for communicating and coordinating with the Production Supervisor regarding specific production needs (part availability, equipment, production status, and schedule updates) to ensure on-time delivery. Perform assembly and testing of production hardware within the confines of the systems and procedures and the certified operator system Job Responsibilities • Obtain and maintain Certified Operator Status following site guidelines • Independently perform complex assembly and test operations following written instructions • Detailed knowledge of pneumatic and thermal test requirements and equipment to evaluate aerospace systems. • Experienced in the use of Pressure gauges, flowmeters, relief valves, and/or transducers to create test setups per engineering diagrams and customer specifications. • Thorough understanding of mechanical blueprints • Troubleshoot moderate issues with minimal supervision. • Ability to work on complex projects and/or products with minimal direction and knowledge to involve required support from Engineering or Supervision • Support continuous improvement initiatives and assist in developing test setups and procedures. • Maintain equipment calibration and documentation. • Responsible for ensuring that complaince with Environmental, Health & Safety standards are met • Mentor entry-level technicians. Basic Qualifications: • High School Diploma or Equivalency. • Minimum of 4 years of experience in aerospace manufacturing or military experience or 6 years of relevant manufacturing experience. • Minimum of 1 year experience in Pneumatic Power Module (PPM) Cell • Ability to communicate effectively, manage time and adapt to various work environments. • US Citizen or Permanent Resident • Demonstrated understanding of Lean, Six Sigma, Cellular Manufacturing, One Piece Flow, and Continuous Improvement concepts Preferred Qualifications: • Associate's Degree or equivalent experience. • Minimum of 6 years of aerospace experience • Previously held and willing to obtain explosives permit • Assembly & Test experience in a manufacturing environment • Experience with working with high pressure test stands. • Good understanding of electrical equipment. i.e. power supplies, ohm and volt meters, oscilloscopes and data acquisition systems" • Demonstrated proficiency of Lean, Six Sigma, Cellular Manufacturing, One Piece Flow, and Continuous Improvement concepts

Eaton's IS AER MSD division is currently seeking a Manufacturing Technician III - Actuation. The hours for this role are 7am - 3:30pm is $27.00 - $34.00 per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: Job Summary Eaton's Mission Systems Division is currently seeking a Manufacturing Technician III for its Actuation Team. This position is based at our Orchard Park, NY facility. Manufacturing technicians are responsible for performing assembly and test processes on aerospace hardware. Development of hardware, creating functional test setups, working with various high pressure gases, and initiating engineering collaboration to successfully deliver quality aerospace components and systems. Technicians are responsible for communicating and coordinating with the Production Supervisor regarding specific production needs (part availability, equipment, production status, and schedule updates) to ensure on-time delivery. Perform assembly and testing of production hardware within the confines of the systems and procedures and the certified operator system Job Responsibilities • Obtain and maintain Certified Operator Status following site guidelines • Independently perform complex assembly and test operations following written instructions • Detailed knowledge of pneumatic and thermal test requirements and equipment to evaluate aerospace systems. • Experienced in the use of Pressure gauges, flowmeters, relief valves, and/or transducers to create test setups per engineering diagrams and customer specifications. • Thorough understanding of mechanical blueprints • Troubleshoot moderate issues with minimal supervision. • Ability to work on complex projects and/or products with minimal direction and knowledge to involve required support from Engineering or Supervision • Support continuous improvement initiatives and assist in developing test setups and procedures. • Maintain equipment calibration and documentation. • Responsible for ensuring that complaince with Environmental, Health & Safety standards are met • Mentor entry-level technicians. Basic Qualifications: • High School Diploma or Equivalency. • Minimum of 4 years of experience in aerospace manufacturing or military experience or 6 years of relevant manufacturing experience. • Minimum of 1 year experience in Pneumatic Power Module (PPM) Cell • Ability to communicate effectively, manage time and adapt to various work environments. • US Citizen or Permanent Resident • Demonstrated understanding of Lean, Six Sigma, Cellular Manufacturing, One Piece Flow, and Continuous Improvement concepts Preferred Qualifications: • Associate's Degree or equivalent experience. • Minimum of 6 years of aerospace experience • Previously held and willing to obtain explosives permit • Assembly & Test experience in a manufacturing environment • Experience with working with high pressure test stands. • Good understanding of electrical equipment. i.e. power supplies, ohm and volt meters, oscilloscopes and data acquisition systems" • Demonstrated proficiency of Lean, Six Sigma, Cellular Manufacturing, One Piece Flow, and Continuous Improvement concepts #IND123 #IND456 #LI-KM1 #LI-RR2 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-###-#### to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

We're looking for Automotive Mechanics with a minimum of 5 years of professional automotive repair experience to join us at Carvana - the fastest-growing used automotive retailer in U.S. history and one of the four fastest companies to make the Fortune 500. Pay Range: $25- $31 hourly As an Experienced Auto Technician in our Post Production department,you'll be expected to perform extensive repairs and heavy engine work, advanced vehicle diagnostics, as well as: Repairing advanced vehicle electrical issues Installing, repairing, and replacing vehicle refrigerant and recovery systems Performing vehicle diagnostics and repairs on all makes and models, including electric and hybrid vehicle At Carvana, you'll receive a competitive wage and amazing perks - including a 401(k) with Carvana match and even a vehicle purchase discount - all while using state of the art tools in one of our high-tech Inspection Centers (click here to learn more). If you're joining us in an entry-level position, we offer training programs to make sure your skills and pay progress along with the company. Other perks of the Job 100% company-paid healthcare premiums Generous paid-time off and your birthday is a holiday! ASE and tool reimbursement programs Tuition reimbursement and student loan repayment How To Get Started Join the Carvana team by applying on this page, or call one of our recruiters by phone at **************, Monday through Friday, between 6 AM and 4 PM MST. Not a match for this role? We have a variety of Technician roles in our Inspection Centers, depending on your level of experience - take a look below to see what you'll be doing to help us get our low-mileage, late-model cars ready for our customers: Entry-Level Auto Technician (min 6 months professional experience): perform light maintenance, fluid checks, and/or conduct the initial inspection on our vehicles to look for any imperfections or repairs that may be needed throughout the reconditioning process. Brake and Tire Technician (min 1 year professional experience): perform light maintenance or repairs, including changing brakes and tires Mid-Level (Mechanical Repair / Build / General) Technician (min 3 years of professional experience): perform light to medium automotive repairs and minimal diagnostics on our vehicles Experienced Technician (min 5 years of professional experience): perform extensive repairs and heavy engine work, as well as advanced vehicle diagnostics on all makes and models, including electric and hybrid vehicles We also have a variety of other automotive roles available in one of our 17 locations across the country - take a look at our Careers site to apply for one of the following roles: Auto Body roles: Paint, Prep/Body work, Wheel Repair, Airbrush, Interior Repair, Glass Repair, and PDR (Paintless Dent Repair) roles Auto Technician/Mechanic roles: LOF (Lube, Oil, and Filter), Inspection, Brake and Tire, Mechanical Repair / Build, and Master Technician roles Entry-Level roles: Detailing, Inventory Associate (Lot Attendant), Photobooth, Parts Associate, Inspection, and Coordinator/Administrator roles General qualifications and requirements Ability to physically operate vehicle equipment and tools - must be able to lift up to 60 pounds independently Must be at least 18 years of age and possess a valid driver's license. Some positions may be subject to an Motor Vehicle Records (MVR) check An ability to work in a fast-paced, ever-changing production environment while sometimes being exposed to excessive weather conditions (heat/cold) Use of safety equipment that may include but not limited to face shield or goggles, non-slip shoes, gloves, mask, and other protective garments and equipment About Carvana At Carvana, we sell cars but we aren't car salesmen. Our promise is simple: we won't sell a car to a customer that we wouldn't sell to our own Mom. Period. To make sure our cars are in first-rate condition, we've built multiple vehicle Reconditioning Centers around the country, where our cars are inspected, perfected, and photographed before reaching the Carvana website. Think you've got what it takes to join our team? Apply today! Carvana is an equal employment opportunity employer. All applicants receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, marital status, national origin, age, mental or physical disability, protected veteran status, or genetic information, or any other basis protected by applicable law. Carvana also prohibits harassment of applicants or employees based on any of these protected categories. Hiring is contingent on passing a complete background check. This role is not eligible for visa sponsorship. Must be at least 18 years of age and possess a valid driver's license. Must be able to read, write, speak and understand English.

Required Qualifications: High School Diploma or GED equivalent. 2 + years Production Operations experience or Associates Degree with previous internship in Plant Operations Preferred Qualifications: Associates Degree or higher preferred. About Linde\: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. The company serves a variety of end markets including chemicals & refining, food & beverage, electronics, healthcare, manufacturing, and primary metals. Linde's industrial gases are used in countless applications, from life-saving oxygen for hospitals to high-purity & specialty gases for electronics manufacturing, hydrogen for clean fuels and much more. Linde also delivers state-of-the-art gas processing solutions to support customer expansion, efficiency improvements and emissions reductions. For more information about the company and its products and services, please visit ************** We offer a comprehensive competitive benefits package including paid holidays and vacation, health, dental, disability, life insurance, 401(k) (with matching), and pension benefits. At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. Linde thanks all applicants in advance for their interest; however, only those applicants who are being considered for an interview will be contacted. Pay commensurate with experience. Open to salary range $62,500.00 - $77,660.00. Job Overview: Linde is looking for qualified applicants to fill the role of Production Technician for the hydrogen and air separation processes at our Niagara Falls, NY facility. The Production Technician must demonstrate initiative in handling issues, be self-motivated, dependable, and work within a team environment. Primary Responsibilities: Responsibilities and duties of a Production Technician include but are not limited to: Work 12 hour rotating shifts in a 24/7/365 environment. Starting and shutting down equipment and processes. Monitoring and adjusting equipment and plant process operating parameters. Correctly performing valve line-ups. Preparing equipment for maintenance work including lock-out-tag-out. Correctly and safely permitting maintenance work. Professional judgment for operating the facility safely, reliably, and efficiently at all times. Procedure development and training of new employees. Effectively communicating with our customers and suppliers when required. Other duties as assigned. The Production Technician must be able to perform basic troubleshooting and recognize when to escalate matters when more experienced specialists must be called in for support.

Job Description The hours for 1st Shift for this role are 7:00am - 3:30pm The hours for 2nd Shift for this role are 3:00 - 11:30pm is $24.09 per hour. What you'll do: **Responsibilities **- Perform manufacturing processes on complex/routine assemblies under close supervision and follow standard processes/written instructions. Knowledge of standard manufacturing practices and the use of common assembly tools. Capability to work independently on production hardware following company policies and processes and raise concerns about product quality or safety to Production Support Technicians and Production Supervisors. Ability to perform product testing using high pressure test equipment while following written acceptance test documents. Document test results on data sheets or record test data in electronic data collection system. Perform routine and some complex troubleshooting on production hardware and test equipment. Verify calibrated equipment, material with expiration dates and written instructions are up to date and accurate prior to use in production. Qualifications: High School Diploma or Equivalency. Minimum of 2 years Aerospace manufacturing OR military experience OR 3 years of relevant manufacturing experience US Citizen or Permanent Resident Preferred- Associantes Degree in Mechanical / Electrical Technology Minimum 5 years of Aerospace manufacturing experience "Assembly & Test experience in an explosives manufacturing environment Electronics assembly and Inspection experience (Certified in J-STD-001 and or IPC-A-610) Good understanding of electrical equipment. i.e. power supplies, ohm and volt meters, oscilloscopes and data acquisition systems" Basic understanding of Lean, Six Sigma, Cellular Manufacturing, One Piece Flow, and Continuous Improvement concepts You should be proficient in: Machine Building/Assembling Mechanical Assembly Skills Blueprint Reading

By living according to a common set of values, we create a culture that unifies, embraces the uniqueness we all bring to the company, and positions Integer for long-term success. At Integer, our values are embedded in everything we do. Customer We focus on our customers' success Innovation We create better solutions Collaboration We create success together Inclusion We always interact with others respectfully Candor We are open and honest with one another Integrity We do the right things and do things right First shift. The primary purpose of this job is to perform technical functions related to the production of batteries and capacitors. This position is responsible for the setup, inspection, data analysis and troubleshooting related to various technical production functions around testing, destruction analysis and machine operations. This position will follow standardized or prescribed assignments involving a sequence of related operations under limited supervision Key Accountabilities: 1. Adheres to Integer values and all safety and quality requirements including, but not limited to: Quality Management Systems (QMS), Environmental Management Systems (EMS), U.S. Food and Drug Administration (FDA) regulations, Company policies and operating procedures, and other regulatory requirements. 2. Sets up and runs experiments and/or test apparatus following clear instructions. Operates some or all of the following: electrical test stations and software, cathode printing equipment and software, microscopes, micrometer, retical, metallograph, scales, data recording software, OCV meters, cameras, XRF, laser marker, plasma cleaner, spot welder or other measuring devices. 3. Performs failure analysis, initial troubleshooting and repairs including but not limited to checking system accuracy, carriers and racks are properly functioning, and calibrations Handles rack check operations. 4. Performs routine product analysis using standard procedures making accept/reject decisions based on product documents. 5. Compiles and summarizes results of tests for evaluation by engineering support teams. 6. Manages visual inspection processes on routine parts to confirm product quality. This includes decision on pass/fail of product quality. 7. Complies and completes documentation including but not limited to: reports, RMAs, DIRs, SDRs, LDRs, cell codes, work orders, SOKs to required specifications and procedures based on product type. 8. Handles 5S cleaning of all equipment outlined in #2 to ensure long term equipment and product quality. 9. Performs other functions as required Minimum Education: High school graduate. Associate's Degree preferred but not required. Minimum Experience: 3 years of Integer related work experience and/or 5 years of experience in a regulated industry required. Experience mixing chemicals preferred Specialized Knowledge: Ability to read technical drawings/prints. Computer operation skills. Mechanical aptitude. Product knowledge helpful. Special Skills: Good organizational and communication skills. Strong computer skills. Detail oriented, organized and demonstrates the ability to work both independently and as a team. Salary 17.30- 25.38 per hour Our total rewards program is designed to attract, retain, and motivate associates to contribute to Integer's success. Our compensation program includes base wages, a cash-based incentive program supporting our pay-for-performance philosophy, overtime pay, shift differentials, and call-in pay, when applicable. We provide a comprehensive benefits package with immediate eligibility including medical, dental, vision, disability, life insurance, and adoption benefits. Parental leave is available after one year. Optional employee-paid programs include supplemental life insurance, critical illness, hospital indemnity and accident insurance. Employees are immediately eligible to participate in the 401(k) plan with company matching contributions. We provide 80 hours (10 days) of company designated holidays per year plus an annual allotment of paid time off. U.S. Applicants: Equal Opportunity Employer. In addition, veterans and individuals with disabilities are encouraged to apply.

About PCB Piezotronics, Inc. PCB manufactures sensors used by design engineers and predictive maintenance professionals to test and measure vibration, pressure, force, acoustics, load and shock for test, measurement, monitoring and control requirements. Our sensors support testing in aerospace and defense, automotive, transportation, civil engineering, and general R&D industries. PCB is a wholly-owned subsidiary of Amphenol Corporation. With a focus on Total Customer Satisfaction for both our internal and external customers, we have a strong and ongoing commitment to being a great place to work! Learn more about our team | *********** | ************************************************** More Reasons to Join the Team PCB offers a highly collaborative and team-based atmosphere. Total Customer Satisfaction, for internal and external customers alike, is at the heart of our business and guides our interactions every day. Social events and opportunities are hosted throughout the year aimed to develop internal relationships and promote a culture focused on collaboration and teamwork. PCB also provides all full-time team members with 100% employer paid medical premiums for you and your family, a competitive PTO package and 10 company paid holidays. As a Production Techni cian with PCB Piezotronics, Inc., you will perform a variety of production assembly tasks, including a commitment to quality, Total Customer Satisfaction (TCS), safety rules, maintaining manufacturing standards and utilizing written procedures and documentation where appropriate. Production tasks require the ability to follow written/verbal instructions and a thorough knowledge of techniques, materials, tools and equipment. Additional Duties: Perform simple assembly using microscope, basic tools, fine hand tools, epoxy/cures, inspection processes, and good soldering techniques. During production may perform such tasks as soldering, spot welding, and washing utilizing documentation such as drawings, routers, Bills of Material's and specification using the manufacturing standards, ISO 9001 and AS9100. Must inspect all workmanship and special processes of an operation performed ensuring quality before moving into next operation. Show commitment to quality and Total Customer Satisfaction (TSC) through dedicating skills to achieve zero defect status. Responsible for knowing and using proper Electrostatic Discharge (ESD) procedures as outlined in the ESD manual. Communicates with supervisors, lead persons and other departments concerning any problems with product, assembly, documentation, and/or schedule. Ensures that all material and equipment calibration dates are not expired before using, and notifies supervisor or lead person if expired or close to expiration. Performs other related duties as directed Minimum Qualifications: Education: High school graduate or GED Experience: Basic computer and electronic skills. Travel Requirement: NONE Preferred Qualifications: Background in Soldering Demonstrated problem solving skills Additional Benefits: 100% Company Paid Medical Insurance Premiums Dental and Vision Insurance Company funded HSA or HRA Accounts Employer paid basic life insurance, short- and long-term disability insurance 401k Company Match Annual Bonus Physical Demands (U.S. only) The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand; walk; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. International Traffic in Arms Regulations This position requires access to “controlled technology” as defined in the Export Administration Regulations (15 C.F.R. §730 et. seq.) and “technical data” as defined in the International Traffic in Arms Regulations (22 C.F.R, Chapter 1, Subchapter M). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. PCB Piezotronics, Inc. is an Equal Opportunity E

About PCB Piezotronics, Inc. PCB manufactures sensors used by design engineers and predictive maintenance professionals to test and measure vibration, pressure, force, acoustics, load and shock for test, measurement, monitoring and control requirements. Our sensors support testing in aerospace and defense, automotive, transportation, civil engineering, and general R&D industries. PCB is a wholly-owned subsidiary of Amphenol Corporation. With a focus on Total Customer Satisfaction for both our internal and external customers, we have a strong and ongoing commitment to being a great place to work! Learn more about our team | *********** | ************************************************** More Reasons to Join the Team PCB offers a highly collaborative and team-based atmosphere. Total Customer Satisfaction, for internal and external customers alike, is at the heart of our business and guides our interactions every day. Social events and opportunities are hosted throughout the year aimed to develop internal relationships and promote a culture focused on collaboration and teamwork. PCB also provides all full-time team members with 100% employer paid medical premiums for you and your family, a competitive PTO package and 10 company paid holidays. As a Production Techni cian with PCB Piezotronics, Inc., you will perform a variety of production assembly tasks, including a commitment to quality, Total Customer Satisfaction (TCS), safety rules, maintaining manufacturing standards and utilizing written procedures and documentation where appropriate. Production tasks require the ability to follow written/verbal instructions and a thorough knowledge of techniques, materials, tools and equipment. Additional Duties: Perform simple assembly using microscope, basic tools, fine hand tools, epoxy/cures, inspection processes, and good soldering techniques. During production may perform such tasks as soldering, spot welding, and washing utilizing documentation such as drawings, routers, Bills of Material's and specification using the manufacturing standards, ISO 9001 and AS9100. Must inspect all workmanship and special processes of an operation performed ensuring quality before moving into next operation. Show commitment to quality and Total Customer Satisfaction (TSC) through dedicating skills to achieve zero defect status. Responsible for knowing and using proper Electrostatic Discharge (ESD) procedures as outlined in the ESD manual. Communicates with supervisors, lead persons and other departments concerning any problems with product, assembly, documentation, and/or schedule. Ensures that all material and equipment calibration dates are not expired before using, and notifies supervisor or lead person if expired or close to expiration. Performs other related duties as directed Minimum Qualifications: Education: High school graduate or GED Experience: Basic computer and electronic skills. Travel Requirement: NONE Preferred Qualifications: Background in Soldering Demonstrated problem solving skills Additional Benefits: 100% Company Paid Medical Insurance Premiums Dental and Vision Insurance Company funded HSA or HRA Accounts Employer paid basic life insurance, short- and long-term disability insurance 401k Company Match Annual Bonus Physical Demands (U.S. only) The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand; walk; and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. International Traffic in Arms Regulations This position requires access to “controlled technology” as defined in the Export Administration Regulations (15 C.F.R. §730 et. seq.) and “technical data” as defined in the International Traffic in Arms Regulations (22 C.F.R, Chapter 1, Subchapter M). Qualified candidates must be legally authorized to access such controlled technology prior to beginning work. PCB Piezotronics, Inc. is an Equal Opportunity E

Job DescriptionDescription: The successful candidate will be a part of the Production Team of between 4 and 10 associates that are required to engage in the production and/or packaging of chocolate-based confectionary products. This is a full-time seasonal position - Monday through Friday, some Saturdays during the busy season. Requirements: The position requires an individual with several attributes, including: Standing for extended periods of time; Lifting/carrying up to 20 lbs; Working well with others in a team environment (MUST); Completing a variety of assembly line tasks as assigned. · Product management - all steps of production is properly made using the quality of food preparation as trained. · Molding and demolding - including care for the molds themselves. · Topping and drizzling - preparing the products with the correct ingredients and amounts as ordered. · Cleaning and sanitizing - all molds, machines, belts and areas need to be cleaned and sanitized after work and between products. · Packing, box assembly and finished product palletization · Ensuring all packages are correctly sealed and labeled, proper date coding · As well as other duties, as assigned by Line Lead or Managers/Supervisors · Attention to detail is key! Training and oversight is provided for all job duties.

Work Schedule Third Shift (Nights) Environmental Conditions Able to lift 40 lbs. without assistance, Adherence to all Good Manufacturing Practices (GMP) Safety Standards, Cleanroom: no hair products, jewelry, makeup, nail polish, perfume, exposed piercings, facial hair etc... allowed, Fluctuating Temps hot/cold, Loud Noises (Equipment/Machinery), No contact lens allowed; prescriptive glasses will be provided, Some degree of PPE (Personal Protective Equipment) required (safety glasses, gowning, gloves, lab coat, ear plugs etc.), Standing for full shift, Strong Odors (chemical, lubricants, biological products etc.) Job Description As part of the Thermo Fisher Scientific team, you'll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life every single day to enable our customers to make the world healthier, cleaner and safer. We provide our global teams with the resources needed to achieve individual career goals while helping to take science a step beyond by developing solutions for some of the world's toughest challenges, like protecting the environment, making sure our food is safe or helping find cures for cancer. Competitive Pay: $20/hr; + shift differential for 2nd and 3rd shift positions Shift: M-F 3rd shift 10:30pm to 7am Location/Division Specific Information: Grand Island, NY-Biologicals and Chemicals Division (BCD). Manufacturing facility producing liquid and powder media and developing cell culture cell therapies. How Will You Make an Impact?: In this role you will produce dry powder and liquid media consisting of various raw materials used in life science applications. The Manufacturing Technician II will perform various operations using specialized equipment ranging from manual to automated process steps. This role requires a high level of attention to detail with safety, quality, and other production standards in mind to contribute to the site's overall success. A Day in the Life: Use various equipment for processing. Interpret established protocols and procedures to maintain a safe working environment and ensure product quality and consistency. Collaborate and work with diverse teams to support manufacturing. Monitor critical process parameters for equipment and perform routine checks to ensure process integrity and identify any deviations. Education: High school diploma or equivalent required. Experience: Required: Minimum of 1 years of work experience in a manufacturing, operations, production or lab setting or related field Preferred: Experience in a cGMP environment Knowledge, Skills, Abilities: Follow multi-step instructions and document accurately for safety and quality. Familiarity with advanced manufacturing processes and adept at identifying practical process improvements. Proficiency in completing and training others effectively to accomplish department's processes. Physical Requirements / Work Environment Capable of lifting, moving up to 50 pounds, standing for extended periods, squatting, bending, and reaching during tasks. Ability to wear all required Personal Protective Equipment (PPE), including uniform, steel toe shoes, hair net, beard guard (if necessary), safety glasses, and gloves. Additional PPE such as bump cap, face shield, and respirator may also be necessary. What We Offer Compensation Competitive Hourly Pay Rate Additional shift differential for 2nd shift and 3rd shift positions Annual performance-based bonus Annual merit performance-based increase Excellent Benefits Benefits & Total Rewards | Thermo Fisher Scientific Medical, Dental, & Vision benefits-effective Day 1 Paid Time Off & Designated Paid Holidays Retirement Savings Plan Tuition Reimbursement Employee Referral Bonus Career Advancement Opportunities Compensation and Benefits The hourly pay range estimated for this position based in New York is $16.10-$24.16. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

Our Mission: Step into a new era of helmet technology with KAV, where innovation meets unparalleled safety. Our unique approach combines cutting-edge 3D printing technology with bespoke design, offering unparalleled protection and comfort tailored to each individual's contours. Proudly made in the USA, KAV Helmets epitomize innovation, quality, and a commitment to sustainable, personalized safety gear. Choosing KAV means supporting a brand that values excellence and a better way of doing business, focused on the well-being of our customers and the planet. Your Role: Assemble, inspect and ship the most advanced helmets in the industry. Operate and maintain 3D printers in order to build the most advanced helmets on the planet. Key Responsibilities: Assemble and test helmets for certification and shipment to customers Quality inspection of printed and assembled parts Use hand tools to perform routine maintenance and repair of printers and support equipment Enhance our existing processes and help to grow our production capabilities Maintain the facilities to ensure proper function and operation. Use a variety of software and equipment to improve the printers capabilities and reliability Utilize Manufacturing Execution System (MES) for auditing and tracking production. Qualifications: A shared passion for our mission and with it the desire to put all that you love into everything that you do at KAV. Initiative to proactively improve our existing processes and create new ones. Willingness to dive into complex and novel problems and collaborate with others to iterate towards the best solution Methodical and detail oriented to ensure the quality required for a certified helmet 3D printing experience preferred Work closely and seamlessly with team members across the company to insure our customers love our product and our brand. What We Offer: The opportunity to be a part of a forward-thinking company that is revolutionizing the helmet industry and scaling mass customization Flexible schedule A creative and supportive team environment where your ideas and contributions are valued Competitive salary and benefits package The chance to make a significant impact on enhancing rider safety and comfort, while also contributing to environmental sustainability Equal Employment Opportunity: Our organization will not discriminate against or harass any employee or applicant for employment because of race, color, creed, religion, national origin, sex, sexual orientation, gender identity, disability, age, marital status, familial status, veteran status, membership or activity in a local human rights commission, status with regard to public assistance or any other legally protected basis, in accordance with applicable law.

HWI has a fantastic opportunity to join our Operations Team as a Manufacturing Production Technician. The Manufacturing Production Technician contributes to the success of HarbisonWalker International through the safe manufacturing of refractory products, this includes the forming, finishing, and packaging of refractory products, the set up and operation of equipment and machinery to support the production processes, and operating transport machinery to deliver materials to presses on the production line and finished goods into storage and/or trailers for shipment. This role is also responsible for maintaining quality by following set guidelines ensuring the product remains within tolerances established for customers. In addition, the Manufacturing Production Technician maintains clean & safe work environment as well as maintains professional working relationships with co-workers. Responsibilities: Auditing and observing manufacturing process to ensure products meets or exceeds quality standards; owning Quality Control compliance for assigned working area and keeping appropriate logs Operating and programing presses, setters, pickers, scales and all of bearing equipment; off bears brick from press table to rack cart, kiln car or pallet, cleans loose material and flange before setting in prescribed manner Operating tram cab, high lift and other transport machinery to deliver materials to presses; operating lift trucks to transport materials throughout the plant; Transferring kiln cars; transporting racks and/or rack cars to and from presses and ovens; gauging and cleaning kiln cars Actively demonstrates and promotes safety and a safe work environment and hold themselves accountable to drive a best in industry safety culture. Analyzes equipment operations, performance, and problems and secures resources to ensure issues are resolved quickly and properly. Requirements: Requires high school diploma or equivalent Some manufacturing experience helpful Previous forklift experience preferred Understanding of basic safety/OSHA standards Mechanical aptitude Two (2) - four (4) years of previous machine operating or production related experience preferred Physical and Environmental Requirements: Physical Activity: Requires more than 2/3 of time standing, walking, using hands and fingers, reaching, climbing, balancing, stooping, kneeling, crouching, crawling, speaking; requires less than 1/3 of time sitting, Lifting: Requires lifting to 100 pounds less than 1/3 of time. Vision: Requires accurate close, distance color and peripheral vision, including the ability to adjust focus and use peripheral vision. Environment: Requires more than 2/3 of time working near moving mechanical parts and being exposed to fumes, airborne particles and outdoor weather conditions; 1/3 to 2/3 of time in wet or humid conditions, in extreme heat or cold, and exposed to toxic or caustic chemicals; and less than 1/3 of the time in an office setting, in high places, at risk of electrical shock and near vibration. Noise: Requires exposure to very loud noise.

Job Description If you like to do small intricate ars and crafts you'd be great at this job! No experience required. Start pay for entry level (no experience) is $16.50 per hour. Hours: Mon-Fri 5a-1:30p Gowanda BTI, 7426A Tanner Parkway Arcade, NY Position is mainly sedentary SUMMARY Will perform assemble or modify small electronic precision components that will satisfactorily meet customer and part specifications, usually with supervision. Demonstrates the ability to work with limited supervision and may be called to rotate to a wide array of operations throughout the facility. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Performs a wide variety of production related tasks. Ensures quality and consistency in production processes by assessing, modifying, and/or calibrating equipment. Reads work orders, follows production drawings and sample assemblies, or receives verbal instructions regarding duties to be performed. Positions and aligns parts in specified relationship to each other in fixture, or other holding device. Crimps, screws, solders, or performs similar operations to join or secure parts in place, using hand tools, power tools, machines, and equipment. Installs small components/ assemblies or sub assemblies in covers. Performs intermediate assembly tasks, such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, and color coding parts and assemblies. Operates machines that mold, shape, or wind component parts. Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics. Performs Go-No Go testing and inspection, using magnifying devices, measuring instruments, and electronic test equipment, to ensure parts and assemblies meet production specifications and standards. May perform assembly operations under microscope or other magnifying device. Maintain an acceptable standard of quantity and quality while performing tasks. Participate in cell/team activities to improve process or remedy quality issues. Advise the Team Leader or Plant Supervisor of issues that negatively impact the production of a quality part. Performs other duties as assigned. Gowanda BTI is an affiliate of iNRCORE. iNRCORE and its affiliated entities are an equal opportunity employer with a full suite of benefits offered to full-time employees. Health, Dental, and Vision Benefits Elective Flexible Spending and Dependent Care Accounts Company paid and elective buy-up Life & AD&D Insurance Company paid Short-Term Disability and Elective Long-Term Disability Elective Critical Illness, Hospital Indemnity, and Supplemental Accident Coverage Benefits 401(k) Retirement Savings Plan with qualifying Company match Company paid mental health and Employee Assistance Program (EAP) Paid Holidays and generous paid time off (PTO) iNRCORE, LLC and its affiliated entities is an Equal Opportunity Employer. All qualified applicants will be considered.

If you like to do small intricate ars and crafts you'd be great at this job! No experience required. Start pay for entry level (no experience) is $16.50 per hour. Hours: Mon-Fri 5a-1:30p Gowanda BTI, 7426A Tanner Parkway Arcade, NY Position is mainly sedentary SUMMARY Will perform assemble or modify small electronic precision components that will satisfactorily meet customer and part specifications, usually with supervision. Demonstrates the ability to work with limited supervision and may be called to rotate to a wide array of operations throughout the facility. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Performs a wide variety of production related tasks. Ensures quality and consistency in production processes by assessing, modifying, and/or calibrating equipment. Reads work orders, follows production drawings and sample assemblies, or receives verbal instructions regarding duties to be performed. Positions and aligns parts in specified relationship to each other in fixture, or other holding device. Crimps, screws, solders, or performs similar operations to join or secure parts in place, using hand tools, power tools, machines, and equipment. Installs small components/ assemblies or sub assemblies in covers. Performs intermediate assembly tasks, such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, and color coding parts and assemblies. Operates machines that mold, shape, or wind component parts. Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics. Performs Go-No Go testing and inspection, using magnifying devices, measuring instruments, and electronic test equipment, to ensure parts and assemblies meet production specifications and standards. May perform assembly operations under microscope or other magnifying device. Maintain an acceptable standard of quantity and quality while performing tasks. Participate in cell/team activities to improve process or remedy quality issues. Advise the Team Leader or Plant Supervisor of issues that negatively impact the production of a quality part. Performs other duties as assigned. Gowanda BTI is an affiliate of iNRCORE. iNRCORE and its affiliated entities are an equal opportunity employer with a full suite of benefits offered to full-time employees. Excellent earning potential with qualifying annual bonuses Health, Dental, and Vision Benefits Elective Flexible Spending and Dependent Care Accounts Company paid and elective buy-up Life & AD&D Insurance Company paid Short-Term Disability and Elective Long-Term Disability Elective Critical Illness, Hospital Indemnity, and Supplemental Accident Coverage Benefits 401(k) Retirement Savings Plan with qualifying Company match Company paid mental health and Employee Assistance Program (EAP) Paid Holidays and generous paid time off (PTO) Employee Discount Program (LifeMart via ADP) iNRCORE, LLC and its affiliated entities is an Equal Opportunity Employer. All qualified applicants will be considered.

If you like to do small intricate ars and crafts you'd be great at this job! No experience required. Start pay for entry level (no experience) is $16.50 per hour. Hours: Mon-Fri 5a-1:30p Gowanda BTI, 7426A Tanner Parkway Arcade, NY is mainly sedentary SUMMARY Will perform assemble or modify small electronic precision components that will satisfactorily meet customer and part specifications, usually with supervision. Demonstrates the ability to work with limited supervision and may be called to rotate to a wide array of operations throughout the facility. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Performs a wide variety of production related tasks. Ensures quality and consistency in production processes by assessing, modifying, and/or calibrating equipment. Reads work orders, follows production drawings and sample assemblies, or receives verbal instructions regarding duties to be performed. Positions and aligns parts in specified relationship to each other in fixture, or other holding device. Crimps, screws, solders, or performs similar operations to join or secure parts in place, using hand tools, power tools, machines, and equipment. Installs small components/ assemblies or sub assemblies in covers. Performs intermediate assembly tasks, such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, and color coding parts and assemblies. Operates machines that mold, shape, or wind component parts. Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics. Performs Go-No Go testing and inspection, using magnifying devices, measuring instruments, and electronic test equipment, to ensure parts and assemblies meet production specifications and standards. May perform assembly operations under microscope or other magnifying device. Maintain an acceptable standard of quantity and quality while performing tasks. Participate in cell/team activities to improve process or remedy quality issues. Advise the Team Leader or Plant Supervisor of issues that negatively impact the production of a quality part. Performs other duties as assigned. Gowanda BTI is an affiliate of iNRCORE. iNRCORE and its affiliated entities are an equal opportunity employer with a full suite of benefits offered to full-time employees. Health, Dental, and Vision Benefits Elective Flexible Spending and Dependent Care Accounts Company paid and elective buy-up Life & AD&D Insurance Company paid Short-Term Disability and Elective Long-Term Disability Elective Critical Illness, Hospital Indemnity, and Supplemental Accident Coverage Benefits 401(k) Retirement Savings Plan with qualifying Company match Company paid mental health and Employee Assistance Program (EAP) Paid Holidays and generous paid time off (PTO) iNRCORE, LLC and its affiliated entities is an Equal Opportunity Employer. All qualified applicants will be considered.

Requirements QUALIFICATION REQUIREMENTS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Position requires a high degree of self-motivation and good organizational skills. Two to four months of training are required to properly prepare a person for this position. EDUCATION and/or EXPERIENCE: Associate degree (A. A.) or equivalent from two-year college or technical school; or six months to one year related experience and/or training; or equivalent combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the general public. MATHEMATICAL SKILLS Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. REASONING ABILITY Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to walk, sit, and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts and fumes or airborne particles. The noise level in the work environment is usually moderate. American Packaging Corporation is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. American Packaging Corporation will make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodation would impose an undue hardship on the operation of our business. EOE/AA Disability/Veteran. If you are interested in applying for an employment opportunity and need special assistance or an accommodation to apply for a posted position, please contact our Human Resources department at: ***************************************.

Eaton's IS AER MSD division is currently seeking a Manufacturing Technician - Actuation - 2nd Shift. The hours for this role are 3:00pm - 11:30pm is $24.09 per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: Job Summary Eaton's Mission Systems Division is currently seeking a Manufacturing Technician for its Actuation Team. This position is based at our Orchard Park, NY facility. Manufacturing technicians are responsible for performing assembly and test processes on aerospace hardware. Development of hardware, creating functional test setups, working with various high pressure gases, and initiating engineering collaboration to successfully deliver quality aerospace components and systems. Technicians are Responsible for communicating and coordinating with the Production Supervisor regarding specific production needs (part availability, equipment, production status, and schedule updates) to ensure on-time delivery. Perform assembly and testing of production hardware within the confines of the systems and procedures and the certified operator system Job Responsibilities • Perform manufacturing processes on complex/routine assemblies under close supervision and follow standard processes/written instructions. • Knowledge of standard manufacturing practices and the use of common assembly tools. • Capability to work independently on production hardware following company policies and processes and raise concerns about product quality or safety to Production Support Technicians and Production Supervisors. • Ability to perform product testing using high pressure test equipment while following written acceptance test documents. • Document test results on data sheets or record test data in electronic data collection system. • Perform routine and some complex troubleshooting on production hardware and test equipment. • Verify calibrated equipment, material with expiration dates and written instructions are up to date and accurate prior to use in production. • Properly manage the traceability of numerous components to ensure assembly accuracy. • Work in partnership with all Manufacturing Technicians and Engineering to Identify improvement opportunities, resulting in a decrease of lead time, cost savings, elimination of waste, or safety improvement • Obtain and maintain Certified Operator Status following site guidelines • Responsible for ensuring that compliance with Environmental, Health, and Safety standards are met. Qualifications: High School Diploma or Equivalency. Minimum of 2 years Aerospace manufacturing OR military experience OR 3 years of relevant manufacturing experience US Citizen or Permanent Resident Preferred Associantes Degree in Mechanical / Electrical Technology Minimum 5 years of Aerospace manufacturing experience "Assembly & Test experience in an explosives manufacturing environment Electronics assembly and Inspection experience (Certified in J-STD-001 and or IPC-A-610) Good understanding of electrical equipment. i.e. power supplies, ohm and volt meters, oscilloscopes and data acquisition systems" Basic understanding of Lean, Six Sigma, Cellular Manufacturing, One Piece Flow, and Continuous Improvement concepts #IND123 #IND456 #LI-KM1 #LI-RR2 We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. Eaton believes in second chance employment. Qualified applicants with arrest or conviction history will be considered regardless of their arrest or conviction history, consistent with the Los Angeles County Fair Chance Ordinance, the California Fair Chance Act and other local laws. You do not need to disclose your conviction history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if Eaton is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-###-#### to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

If you like to do small intricate ars and crafts you'd be great at this job! No experience required. Start pay for entry level (no experience) is $16.50 per hour. Hours: Mon-Fri 5a-1:30p Gowanda BTI, 7426A Tanner Parkway Arcade, NY Position is mainly sedentary SUMMARY Will perform assemble or modify small electronic precision components that will satisfactorily meet customer and part specifications, usually with supervision. Demonstrates the ability to work with limited supervision and may be called to rotate to a wide array of operations throughout the facility. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Performs a wide variety of production related tasks. Ensures quality and consistency in production processes by assessing, modifying, and/or calibrating equipment. Reads work orders, follows production drawings and sample assemblies, or receives verbal instructions regarding duties to be performed. Positions and aligns parts in specified relationship to each other in fixture, or other holding device. Crimps, screws, solders, or performs similar operations to join or secure parts in place, using hand tools, power tools, machines, and equipment. Installs small components/ assemblies or sub assemblies in covers. Performs intermediate assembly tasks, such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, and color coding parts and assemblies. Operates machines that mold, shape, or wind component parts. Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics. Performs Go-No Go testing and inspection, using magnifying devices, measuring instruments, and electronic test equipment, to ensure parts and assemblies meet production specifications and standards. May perform assembly operations under microscope or other magnifying device. Maintain an acceptable standard of quantity and quality while performing tasks. Participate in cell/team activities to improve process or remedy quality issues. Advise the Team Leader or Plant Supervisor of issues that negatively impact the production of a quality part. Performs other duties as assigned. Gowanda BTI is an affiliate of iNRCORE. iNRCORE and its affiliated entities are an equal opportunity employer with a full suite of benefits offered to full-time employees. Health, Dental, and Vision Benefits Elective Flexible Spending and Dependent Care Accounts Company paid and elective buy-up Life & AD&D Insurance Company paid Short-Term Disability and Elective Long-Term Disability Elective Critical Illness, Hospital Indemnity, and Supplemental Accident Coverage Benefits 401(k) Retirement Savings Plan with qualifying Company match Company paid mental health and Employee Assistance Program (EAP) Paid Holidays and generous paid time off (PTO) iNRCORE, LLC and its affiliated entities is an Equal Opportunity Employer. All qualified applicants will be considered.