Production Technician III - CRO, Sr. (Willis, Texas, United States)
Manufacturing technician job in Willis, TX
Job Title: Production Technician III - CRO, Sr. Work Place Flexibility: Onsite Legal Entity: Entergy Texas, Inc.-GTX CAN BE FILLED BY PRODUCTION TECHNICIAN III, II, I, CRO or CRO-SR.* JOB SUMMARY/DESCRIPTION: Operate and maintain systems associated with a Combined Cycle Gas Turbine (CCGT) facility while demonstrating safety awareness and direction that will continuously improve performance by employees and contractors through the use and strict adherence to procedures and processes.
JOB DUTIES/RESPONSIBILITIES:
* Maintain regulatory compliance and be proactive in dealing with all agencies and avoid reportable violations
* Required participation in the multi-year Production Technician multi skill progression plan to develop key skills in maintenance and operations. Upon completion the employee should have the desire, aptitude and ability to meet board operator qualification
* Conduct and participate in job briefings and safety meetings. Be responsible for Contractor Safety and conduct Contractor Safety Orientations as needed
* Applies understanding and knowledge of plant systems, burner controls (where applicable), turbine controls, data acquisition, process controls, regulating devices, personal computers, troubleshooting, etc.
* Operational duties include, but not limited to, operating the control board, making operational rounds, performing PM/PDM activities, HRSG water chemistry, CEMS monitoring and calibrations
* Applies skills to perform inspections, calibrations, installations, repairs, diagnostics, testing and troubleshooting of complex instrumentation equipment and regulating devices in a CCGT facility, alone and as part of a team. Perform mechanical work involved in inspection, repair and installation of instrumentation and electrical equipment, and light PM of mechanical systems
MINIMUM REQUIREMENTS:
Minimum education:
* 2 Year Associate's Degree in Industrial Electronics, Instrumentation/Controls or Production/Process Technology or equivalent work experience
Minimum experience:
* PTECH III: 0-2 years' experience in a CCGT facility in an Operations or Maintenance position; or 4 years of power plant operations/maintenance/electrical experience
* PTECH II - CRO, SR: 2-5 years' experience in a CCGT facility in an Operations or Maintenance position; or 5 years of power plant operations/maintenance/electrical experience
* Either the minimum education or minimum experience requirements must be met by the applicant for job consideration*
Minimum skills:
* Must be good at communicating, both verbal and written, the results of evaluation of assignments to supervision
* Ability to interpret and comprehend P&ID's, electrical schematics, network diagrams and OEM manuals
Minimum Certifications/Licensing/Testing:
* Successful completion of the EEI POSS/MASS Test
Desired experience:
* CCGT Power Plant experience
* Control Room Operator experience
Primary Location: Texas-Willis Texas : Willis
Job Function: Power Plant Operations
FLSA Status: Nonexempt
Relocation Option: No Relocation Offered
Union description/code: NON BARGAINING UNIT
Number of Openings: 1
Req ID: 121668
Travel Percentage:Up to 25%
An Equal Opportunity Employer, Minority/Female/Disability/Vets. Please click here to view the EEO page, or see statements below.
EEO Statement: The Entergy System of Companies provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, disability, genetic information, marital status, amnesty, or status as a protected veteran in accordance with applicable federal, state and local laws. The Entergy System of Companies complies with applicable state and local laws governing non-discrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment including, but not limited to, recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.
The Entergy System of Companies expressly prohibits any form of unlawful employee harassment based on race, color, religion, sex, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. Improper interference with the ability of the Entergy System of Company employees to perform their expected job duties is absolutely not tolerated.
Accessibility: Entergy provides reasonable accommodations for online applicants. Requests for a reasonable accommodation may be made orally or in writing by an applicant, employee, or third party on his or her behalf. If you are an individual with a disability and you are in need of an accommodation for the recruiting process please click here and provide your name, contact number, the accommodation requested and the requisition number that you are requesting the accommodation for. Employee Services will contact you regarding your request.
Additional Responsibilities: As a provider of essential services, Entergy expects its employees to be available to work additional hours, to work in alternate locations, and/or to perform additional duties in connection with storms, outages, emergencies, or other situations as deemed necessary by the company. Exempt employees may not be paid overtime associated with such duties.
Know Your Rights: Workplace Discrimination is Illegal
The non-confidential portions of the affirmative action program for individuals with disabilities and protected veterans shall be available for inspection upon request by any employee or applicant for employment. Please contact ************************ to schedule a time to review the affirmative action plan during regular office hours.
EEI Testing:
One way that Entergy has found to identify and assess the abilities and skills needed for certain jobs is through pre-employment testing. If this position does require an EEI test, the type of test will be located under the qualifications section of the job posting. If you are invited to a test session, we strongly recommend you review and complete the practice test as well as review the testing brochure for your respective test. The test brochure will give you critical information on the test such as time allocated and number of questions. Also, keep in mind that the actual test is timed; you should practice timing yourself while doing the practice tests. The practice test information and test brochures can be located by going to the EEI website, ********************************* Logon ID: entergy, password: practice test (2 words). Travel expenses incurred in connection with EEI testing are non-reimbursable.
In addition to EEI testing there is also Fit-for-Duty testing which will identify and assess the abilities and skills needed for certain jobs. If this position does require Fit-for-Duty testing, the type of test will be located under the qualifications section of the job posting.
WORKING CONDITIONS:
As a provider of essential services, Entergy expects its employees to be available to work additional hours, to work in alternate locations, and/or to perform additional duties in connection with storms, outages, emergencies, or other situations as deemed necessary by the company. Exempt employees may not be paid overtime associated with such duties.
Please note: Authorization to work in the United States is a precondition to employment in this position. Entergy will not sponsor candidates for work visas for this position.
Manufacturing Specialist I
Manufacturing technician job in Houston, TX
American Packing & Gasket (APG) is seeking a Manufacturing Specialist to join our dynamic production team. This role is responsible for fabricating, assembling, and inspecting precision components used in fluid sealing, conveyance, and industrial applications. You will work closely with our engineering and quality teams to ensure every product meets our high standards of accuracy, safety, and compliance.
If you enjoy hands-on work, take pride in producing high-quality parts, and thrive in a fast-paced manufacturing environment, this position is for you.
Key Responsibilities
Manufacturing & Fabrication
Operate machinery, cutting tools, and equipment to fabricate gaskets, seals, and other custom components to exact specifications.
Follow CAD/CAM drawings, technical prints, and work instructions to ensure precision manufacturing.
Utilize hand tools, dies, and templates for custom parts fabrication.
Assembly & Production
Perform light assembly of components, subassemblies, and finished products.
Package and label finished goods per customer and quality requirements.
Collaborate with cross-functional teams to ensure efficient production flow.
Quality Control & Safety
Inspect parts for dimensional accuracy, material integrity, and quality compliance.
Document measurements, lot codes, and inspection results for traceability.
Follow all safety protocols, including proper handling of materials and use of PPE.
Collaboration & Continuous Improvement
Communicate effectively with supervisors, engineers, and quality teams to resolve production challenges.
Suggest improvements to processes and workflow to enhance productivity and reduce waste.
Maintain a clean and organized work area in compliance with ISO 9001 standards.
Requirements
1+ years of experience in manufacturing, assembly, or a related field.
Basic mechanical aptitude and familiarity with hand tools and measuring instruments (calipers, micrometers, etc.).
Ability to read and interpret technical drawings and work instructions.
Strong attention to detail and commitment to quality.
High school diploma or equivalent.
Preferred
Experience in gasket fabrication, plastics, industrial sealing, or light assembly environments.
Familiarity with CAD/CAM systems or CNC equipment.
Knowledge of ISO 9001 quality systems.
Physical & Work Environment Requirements
Ability to stand, walk, bend, and lift up to 50 lbs for extended periods.
Comfortable working in a production environment with moderate noise and machinery.
Willingness to wear required PPE, including safety glasses and gloves.
Salary Description 15.00 per hour
Manufacturing Specialist
Manufacturing technician job in Houston, TX
Houston, TX 77067 Temp to Hire We are seeking a reliable Manufacturing & Assembly Technician to cut materials, assemble components, and support daily production and shipping operations. This hands-on role requires attention to detail, the ability to follow directions, and physical stamina. The environment is fast-paced and non-climate controlled.
Responsibilities
Cut rubber materials using measuring tools and verbal/written instructions
Complete 150+ lines per day with accuracy
Operate tools and equipment for fabrication and light assembly
Package and ship finished products as needed
Perform quality checks and maintain accurate records
Keep work area clean and organized (ISO 9001 environment)
Required
1+ year experience in manufacturing or assembly
Comfortable lifting 40-45 lbs occasionally (with assistance)
Able to read technical drawings and use basic measuring tools
Must pass a 7-year background check and drug test
Forklift experience a plus
No specific dress code-closed-toe shoes required
Comfortable working in a non-climate controlled environment
Manufacturing Technician
Manufacturing technician job in Baytown, TX
Job Description
1 Resource Group is currently looking for an Manufacturing Technician for Manufacturing Plant in Baytown, TX. The Extruder Operator is responsible for the operation of the online extruder(s), Twin Screw Extruders, operation of quality testing equipment, the making of blends, set up of feed for the lines and finished product packaging and storage. Job responsibilities also include quality testing, recording and proper response to testing results. Additional duties required are housekeeping, the maximization of throughput and yield and the ability to assist in supporting areas when necessary. This role will report directly to the Production Team Lead and will interact with all departments across the business. Work will be a mixture of reactive and planned tasks prioritized by the Site Leadership Team. You will be responsible for plant operations to minimize production impacts and enhance reliability, ensuring that production runs smoothly and efficiently. Your attention to detail, teamwork, and commitment to safety will be essential in maintaining high-quality masterbatch production.
Key Responsibilities:
Operate single and twin-screw extruders to produce masterbatch products.
Set up and adjust machines according to job specifications (temperatures, feed rates, die tooling).
Monitor production runs, making real-time adjustments to maintain quality and throughput.
Conduct visual and physical inspections of finished products for color, consistency, and defects.
Complete batch production records, material usage reports, and downtime logs.
Ensure proper blending and feeding of raw materials into extruders.
Perform routine maintenance and minor troubleshooting of equipment.
Adhere to safety protocols and maintain a clean work area.
Collaborate with Quality and Maintenance teams to resolve issues and optimize output.
Report equipment or process abnormalities immediately to supervisors
Pay $22-24hr
Requirements
High school diploma or GED required.
5-10 years of experience in extrusion or plastics manufacturing preferred.
Familiarity with extrusion machinery and polymer processing is a plus.
Ability to read and interpret production orders, work instructions, and measurement tools.
Strong attention to detail and mechanical aptitude.
Ability to lift 50 lbs, stand for extended periods, and work in a fast-paced environment.
Willingness to work overtime, weekends, or rotating shifts if required.
Benefits
Medical, Dental and Vision offered
Manufacturing Specialist
Manufacturing technician job in Houston, TX
Department: Manufacturing
Job Status: Full-Time
FLSA Status: Salary Non-Exempt
Reports To: Test Supervisor
Amount of Travel Required: 10%
Work Schedule: Monday - Friday; 7 a.m. - 4 p.m.
Positions Supervised: N/A
AIP Level: 7
POSITION SUMMARY: The Manufacturing Specialist assists with manufacturing of mobile power generation packages and other mechanical equipment.
ESSENTIAL FUNCTIONS: (The following duties and responsibilities are all essential job functions, as defined by the ADA, except for those that begin with the word "may.")
Supports reviews of new and old mechanical designs and related equipment for hyper mobile power generation packages & related equipment.
Red lines engineered drawings.
Evaluates new products and new product implementation.
Serves as the liaison between shop personnel and management.
Provides troubleshooting or oversite on power generation packages and other applicable equipment.
Provides pre-job and post-job analysis (where applicable).
Conducts work in accordance with safety rules, standard operating procedures, and workplace.
Evaluates operational readiness of equipment.
Ensures support equipment is manufactured per drawings.
May aid in implementation of more efficient working tasks.
Aids operations with installation and commissioning of power generation packages and other equipment.
Installs flushing/polishing equipment, verify cleanliness, sample oil, remove flushing/polishing equipment, verify pump rotation, ensure systems leak free.
May aid in shaft alignment using laser align system.
Verifies and monitors all systems of units while flushing/testing.
May perform borescope of engines as required.
Rig up/rig down units for testing.
Ensures units ready for shipping.
Performs other related duties as assigned to assist with successful operations and business continuity.
Qualifications
POSITION REQUIREMENTS:
Successfully passes all applicable general pre-employment testing including but not limited to: background check, pre-employment drug screening, pre-employment fit tests, pre-employment aptitude and/or competency assessment(s).
Possesses a valid U.S. Driver's License
Daily in-person, predictable attendance
EDUCATION/EXPERIENCE LEVEL
High School Diploma or equivalent.
Basic mechanical experience.
Knowledge of basic hand tools.
Basic knowledge of equipment.
Ability to read mechanical drawings.
1 year of previous motor, pump, turbine, or relevant mechanical experience.
Specific knowledge of GE LM gas turbines, MTU/RR reciprocating engine and related auxiliary systems a plus but not required.
QUALIFICATIONS, SKILLS, COMPETENCIES, AND ABILITIES
Ability to communicate in a technical manner around clients.
Ability to work within a team concept to successfully complete assigned tasks.
Ability to take instruction well and interact with other employees in a positive manner within the framework of assigned work groups.
Efficient at Microsoft office (word, excel, PowerPoint, outlook).
Knowledge of gas turbine packages and related equipment.
PHYSICAL REQUIREMENTS/WORK ENVIRONMENT
The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Daily required to walk, sit, climb, bend, reach and squat/kneel. When required to go to a wellsite, employees will rideshare with multiple employees. Work environment includes exposure to hazardous materials, operating conditions, audio up to 85 dB and inclement weather. Given these conditions employees are required to wear company mandated and issued personal protective equipment (PPE) (fire retardant coveralls, safety hat, steel-toe boots, safety glasses, ear protection and impact gloves) and must strictly adhere to all safety policies. Manufacturing Specialists are regularly required to lift heavy objects; therefore, Manufacturing Specialists must be able to lift
Work hours
may include or includes
early morning, late evenings, and weekends, depending on business necessity.
AAP /EEO STATEMENT
The Company is committed to the cause of equal employment opportunity for all employees and applicants, thus abiding by all applicable state and federal laws. Our practices regarding employment, job promotion, compensation, training, and termination do not discriminate on the basis of race, color, religious creed, age, sex, national origin, veteran's status, disability, pregnancy, genetic information, or any other legally protected status. It is expected that all employees, both management and staff, will fully support these nondiscriminatory policies.
The company has reviewed this job description to ensure essential functions and duties have been included. It is not intended to be an exhaustive list of all functions, responsibilities, skills, and abilities.
Last Revised 10/2025.
Sr. Production Technician
Manufacturing technician job in Spring, TX
# **Sr\. Production Technician** **Company:** Expand Energy Our core values - Stewardship, Character, Collaborate, Learn, Disrupt - are the lens through which we evaluate every business decision\. As a dynamic, growing company that offers extremely competitive compensation and benefits, our employees are our most valued assets and the foundation of Expands performance among our E&P competitors\.
We seek applicants from all backgrounds to ensure we get the best, most creative talent on our team\. We realize that, historically, underrepresented groups feel the need to be 100% qualified in order to apply\. If you meet any combination of our requirements, we encourage you to apply\. We strive to hire people from a wide variety of backgrounds, not just because it's the right thing to do, but because it makes our company stronger\.
## **Job Summary**
This senior level position coordinates with other departments as needed to resolve problems and provide technical support in order to assist with engineering operations\.
## **Job Duties & Responsibilities**
+ Performs data management activities, which include report/tool creation, loading/entering, verifying, manipulating, analyzing, and reporting data related to engineering operations
+ Performs engineering calculations and preliminary analyses for interpretation of data and provides information to engineers
+ Performs advanced data analysis and makes recommendations based on interpretation of data
+ Recommends design improvements using complex, but established procedures
+ Coordinates data transfer and updates shared data sources among departments
+ Utilizes software to discover trends in operational data and reports
+ Applies skills and concepts to ensure data integrity, data reliability, and data accessibility throughout the group
+ Provides basic, discipline\-specific training to new systems users
+ Performs other duties as assigned
## **Job Specific Skills**
+ Advanced ability to use rigorous logic, critical thinking skills, and methods to solve difficult problems with effective solutions
+ Advanced ability to build numerical and analytical tools using standard industry and corporate software
+ Strong knowledge of Production, Capital/Expense, and Workover reports
+ Strong knowledge of PC/mainframe systems
+ Strong knowledge of database application software
+ Ability to communicate well across multi\-disciplinary teams, including teams that are geographically separated
+ Ability to learn and apply new concepts
## **Education**
Minimum: High school diploma or GED
Preferred: Bachelor's degree \- from accredited university \- Engineering Technology, Math, Science, or related field
## **Experience**
Minimum: 5 \- 8 years related work experience
Expand Energy takes necessary action to ensure that all applicants are treated without regard to their race, color, religion, sex, sexual orientation, age, gender identity, national origin, genetic information, disability, pregnancy, military or veteran status or any other protected characteristic as established by law\.
Expand Energy Corporation's operations are focused on discovering and developing its large and geographically diverse resource base of unconventional oil and natural gas assets onshore in the United States\.
**Nearest Major Market:** Houston
**Job Segment:** Gas, Gas Technician, Engineer, Database, Mainframe, Energy, Engineering, Technology
SAP Functional Specialist - Manufacturing
Manufacturing technician job in Waller, TX
This role involves managing all aspects of the platform transition, including planning, configuration, testing, deployment, and post-implementation support. In this pivotal role, you will provide critical leadership and guidance to functions, utilizing your extensive knowledge and experience of the SAP S/4 HANA system.
Position Responsibilities: may include:
SAP S/4HANA Implementation: Oversee the full lifecycle of SAP S/4 HANA SD deployment, from initial system design, configuring and customizing the system to meet Daikin's unique requirements, to conducting comprehensive system and user acceptance testing, to finally deploying the system.
Planning and Strategy: Create a data-driven approach to plan for Daikin's end-to-end business transformation towards SAP S/4 HANA Sales and Distribution (SD) module. Evaluate our existing processes and create strategic plans to integrate these with S/4 HANA's functionalities.
Process Optimization: Understand business processes in the manufacturing area, identify areas for improvement, and ensure the solution aligns with SAP S/4HANA environment.
Stakeholder Management: Work closely with relevant internal and external stakeholders, including inventory, finance, logistics, to ensure seamless integration of S/4 HANA functions with other business operations. Also, manage relationships with external SAP consultants and solution providers.
Training and Support: Develop a comprehensive training program for end users, thus driving S/4 HANA adoption across the organization. This includes conceptualizing user manuals, training materials, and reference guides.
Vendor Management: Collaborate with SAP consultants and other technology partners to ensure project deliverables are met within timelines and budgets.
Data Integrity and Migration: Oversee the migration of sales and distribution data from legacy systems to SAP S/4HANA, ensuring accuracy and completeness.
Continuous Improvement: Post-implementation, continuously monitor the sales and distribution processes within SAP S/4HANA to identify and implement further enhancements.
Nature & Scope:
Is recognized as a subject matter expert in job area
Manages large projects or processes with limited oversight from manager
Coaches, reviews, and delegates work to lower-level professionals
Problems faced are difficult and often complex
Knowledge & Skills:
At least three full lifecycle SAP S/4 HANA implementations, preferably in a leadership role.
Extensive knowledge of the integral functions, features, and capabilities of SAP S/4 HANA SD
Strong leadership skills with a proven track record of driving large-scale technology transformation projects to completion.
Exceptional problem-solving capabilities, meticulous attention to detail, and robust decision-making abilities.
Exceptional communication and interpersonal skills, with the ability to engage and influence stakeholders at all levels.
Experience:
10 plus years of direct experience with SAP modules
Education/Certification:
A bachelor's degree in Business, Computer Science, Information Systems, or a related field.
People Management: No
Physical Requirements / Work Environment:
Must be able to perform essential responsibilities with or without reasonable accommodations
Reports To:
SAP Enterprise Architecture and Solution Leader
Qualified Applicants must be legally authorized for employment in the United States. Qualified applicants will not require employer sponsored work authorization now or in the future for employment in the United States.
The Company provides equal employment opportunity to all employees and applicants regardless of a person's race, color, religion (including religious dress or grooming practices), creed, national origin (including language use restrictions), citizenship, uniform service member or veteran status, ancestry, disability, physical or mental disability (including HIV/AIDS), medical condition (including cancer and genetic characteristics), genetic information, request for protected leave, marital status, sex, pregnancy, age (over 40), sexual orientation, gender, gender identity or expression, political affiliation, or any other characteristic protected by law. The Company will comply with all federal and state regulations and statutes about individuals with disabilities.
SAP Functional Specialist - Manufacturing
Manufacturing technician job in Waller, TX
Job Description
This role involves managing all aspects of the platform transition, including planning, configuration, testing, deployment, and post-implementation support. In this pivotal role, you will provide critical leadership and guidance to functions, utilizing your extensive knowledge and experience of the SAP S/4 HANA system.
Position Responsibilities: may include:
SAP S/4HANA Implementation: Oversee the full lifecycle of SAP S/4 HANA SD deployment, from initial system design, configuring and customizing the system to meet Daikin's unique requirements, to conducting comprehensive system and user acceptance testing, to finally deploying the system.
Planning and Strategy: Create a data-driven approach to plan for Daikin's end-to-end business transformation towards SAP S/4 HANA Sales and Distribution (SD) module. Evaluate our existing processes and create strategic plans to integrate these with S/4 HANA's functionalities.
Process Optimization: Understand business processes in the manufacturing area, identify areas for improvement, and ensure the solution aligns with SAP S/4HANA environment.
Stakeholder Management: Work closely with relevant internal and external stakeholders, including inventory, finance, logistics, to ensure seamless integration of S/4 HANA functions with other business operations. Also, manage relationships with external SAP consultants and solution providers.
Training and Support: Develop a comprehensive training program for end users, thus driving S/4 HANA adoption across the organization. This includes conceptualizing user manuals, training materials, and reference guides.
Vendor Management: Collaborate with SAP consultants and other technology partners to ensure project deliverables are met within timelines and budgets.
Data Integrity and Migration: Oversee the migration of sales and distribution data from legacy systems to SAP S/4HANA, ensuring accuracy and completeness.
Continuous Improvement: Post-implementation, continuously monitor the sales and distribution processes within SAP S/4HANA to identify and implement further enhancements.
Nature & Scope:
Is recognized as a subject matter expert in job area
Manages large projects or processes with limited oversight from manager
Coaches, reviews, and delegates work to lower-level professionals
Problems faced are difficult and often complex
Knowledge & Skills:
At least three full lifecycle SAP S/4 HANA implementations, preferably in a leadership role.
Extensive knowledge of the integral functions, features, and capabilities of SAP S/4 HANA SD
Strong leadership skills with a proven track record of driving large-scale technology transformation projects to completion.
Exceptional problem-solving capabilities, meticulous attention to detail, and robust decision-making abilities.
Exceptional communication and interpersonal skills, with the ability to engage and influence stakeholders at all levels.
Experience:
10 plus years of direct experience with SAP modules
Education/Certification:
A bachelor's degree in Business, Computer Science, Information Systems, or a related field.
People Management: No
Physical Requirements / Work Environment:
Must be able to perform essential responsibilities with or without reasonable accommodations
Reports To:
SAP Enterprise Architecture and Solution Leader
Qualified Applicants must be legally authorized for employment in the United States. Qualified applicants will not require employer sponsored work authorization now or in the future for employment in the United States.
The Company provides equal employment opportunity to all employees and applicants regardless of a person's race, color, religion (including religious dress or grooming practices), creed, national origin (including language use restrictions), citizenship, uniform service member or veteran status, ancestry, disability, physical or mental disability (including HIV/AIDS), medical condition (including cancer and genetic characteristics), genetic information, request for protected leave, marital status, sex, pregnancy, age (over 40), sexual orientation, gender, gender identity or expression, political affiliation, or any other characteristic protected by law. The Company will comply with all federal and state regulations and statutes about individuals with disabilities.
Manufacturing Technician
Manufacturing technician job in Houston, TX
Key Functions ā¢Experience maintaining and repairing Electrical, Mechanical, & Hydraulic systems/components in these machines: o Mazak (most critical) o Mazatrol o Mitsubishi o Siemens Control o Mori Seiki o QEM o Nagel TBT ā¢Schedule & perform maintenance on all NC and manual equipment with no supervision.
ā¢Schedule & perform repairs on all NC and manual equipment including multi-axis lathes and mills.
ā¢Perform preventive maintenance on machines using written instructions and a checklist.
ā¢Assist in the installation of new mechanical and electrical equipment.
ā¢Maintain equipment according to procedures, reporting problems or deviations.
ā¢Use of all associated hand tools and automated or semi-automated equipment.
ā¢Ability to train others in functional areas. Assists and prepares detailed reports on maintenance activities.
ā¢Create preventive maintenance checklists for operators to follow.
ā¢Participate in pre-job and toolbox meetings with crew members.
ā¢Wear PPE at all times and observe health, safety, and environmental policies.
ā¢Complete safety training (including but not limited to forklift, drugs, and alcohol, electrical, emergency response, fire, first aid, health and hygiene, PPE, risk reporting, IT security, and hazardous materials.
Employee may be assigned other duties in addition to or in place of those described above, and any duties are subject to change at any time according to the needs of the company.
Quote Specialist- Electronics Manufacturing
Manufacturing technician job in Houston, TX
Job Details Experienced Geospace Technologies - Houston, TX Full Time High School Negligible Day ManufacturingDescription
Role and Responsibilities:
Quickly and accurately quote the material and labor for incoming Contract Manufacturing Opportunities. Maintain quote logs and track variance against actual build times.
Obtain Material Pricing and verify Material Availability
Analyze Technical Documents to determine Documentation Structure, the most efficient Build Process, and the resulting Labor Costs
Build BOMs
Define Process Routers
Aid in Assembly/Test Document Creation
Assist in the development of quoting standards, records, and prospective strategies to acquire more business.
Qualifications
Qualifications and Education Requirements
Experience within a contract manufacturing environment:
PCBA
Cable/Harness
System/Box
Experience in quoting one or more of the above manufacturing types
Technical Degree. Years of experience may be used in leu of a degree.
Preferred Skills
SMT equipment programming
Wire/Harness Board design
Work Cell Optimization
Quoting Experience with a Contract Manufacturer
Electronics Production Technician
Manufacturing technician job in Houston, TX
Axiom Space is guided by the vision to build era-defining space infrastructure that drives exploration and fuels a vibrant space economy for the benefit of every human everywhere. Axiom Space is the leading provider of human spaceflight services and developer of human-rated space Axiom Extravehicular Mobility Unit. Axiom Space operates end-to-end missions to the International Space Station today while developing its successor, Axiom Station - a permanent commercial destination in low-Earth orbit that will sustain human growth off the planet and bring untold benefits back home.
Axiom Space fosters a work environment inclusive of all perspectives. We are the pioneers of commercial space, leading the transformation of low-Earth orbit into a global space marketplace. Our mission-driven team is seeking a bold and dynamic Electronics Technician who is fueled by high ownership, execution horsepower, growth mindset, and driven to understand our world, science/technology, and life itself, for the benefit of all on Earth and beyond.
POSITION SUMMARY
Our team is looking for an energetic and dynamic Electronics Technician who will primarily be responsible for the assembly and test of electrical hardware form the developmental stages through flight. This position interfaces with employees and government agencies. This position reports to the AxEVA Production Lead. This role is onsite and will be based at our Gemini facility located in Webster, TX.
KEY DUTIES & RESPONSIBILITIES
The electronics technician will assemble, test, and integrate prototype, qualification, and space-rated avionics hardware.
Fabricate avionics wire harnesses, terminations, connectors, pin and socket assemblies, harness shields, ground terminations, and related components per drawings.
The ability to read and understand electrical drawings and diagrams of avionics systems, assemblies, and wiring layouts.
Ability to assemble prototype and test boxes with minimalistic drawings.
Familiarity with standard lab test equipment (multimeters, oscilloscopes, data acquisition boxes, etc.).
Must be able to interact with all engineering disciplines and technical management in a professional team-oriented environment.
Communicating project progress, status, and potential issues to stakeholders and leadership.
Implementing and maintaining agile project management methodologies throughout the project lifecycle.
Perform additional job duties as assigned.
QUALIFICATIONS:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
Education & Experience
Associate degree required, or an equivalent combination of education and relevant experience; commercial or military aircraft experience strongly preferred.
Minimum 4 years of hands-on experience as an electronics technician.
Proven background in board-level, system-level, and spacecraft-level electronics hardware.
Demonstrated expertise in fabricating, assembling, and testing avionics and electrical assemblies.
Must hold one or more of the following certifications:
NASA-STD-8739.4: Workmanship Standard for Crimping, Interconnecting Cables, Harnesses & Wiring
IPC/WHMA-A-620: Requirements and Acceptance for Cable and Wire Harness Assemblies with Space and Military Applications (Electronic Hardware Addendum)
IPC J-STD-001: Requirements for Soldered Electrical and Electronic Assemblies with Space and Military Applications
NASA-STD-8739.2: Surface Mount Soldering
NASA-STD-8739.3: Through-Hole Soldering
NASA-STD-8739.1: Workmanship Standard for Polymeric Application on Electronic Assemblies
Strong track record of delivering results in fast-paced, ambiguous environments.
Proactive problem-solver with sound judgment and the ability to address complex challenges effectively.
Excellent organizational skills with the ability to meet tight deadlines while ensuring high-quality results.
Skills
Passion for space and the mission
Executes priorities with precision and pace
Entrepreneurial, growth mindset
High EQ and ability to collaborate within teams and cross-functionally
Tech-savvy in using systems and tools to move faster and smarter
Excellent written and verbal communication skills
Competencies:
Embody our core values of leadership, innovation, and teamwork. In addition, to perform the job successfully, an individual should demonstrate the following competencies:
Accountability
Sense of Urgency
Extreme Ownership
Execution and Delivery
Efficiency
Effectiveness
WORK ENVIRONMENT:
Generally, an office environment, but can involve inside or outside work depending on the task.
Requirements
Must be able to complete a U.S. government background investigation.
Proof of U.S. Citizenship or US Permanent Residency is a requirement for this position.
Must be willing to work evenings and weekends as needed to meet critical project milestones.
Physical Requirements
Work may involve sitting or standing for extended periods (90% of the time)
May require lifting and carrying up to 25 lbs. (5% of the time)
Equipment and Machines
Standard office equipment (PC, phone, printer, etc.)
Axiom Space is proud to be an equal opportunity employer. Axiom Space does not discriminate on the basis of race, regional color, national origin, gender (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender identity, gender expression, age, status as a protected veteran, status as an individual with disability, or other applicable legally protected characteristics.
Auto-ApplySeasonal Production Tech
Manufacturing technician job in Houston, TX
Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets.
**Factory Location** : South Houston, TX
**Compensation** : $20.00 / hour
**Shift differential** : 6%-8% of base hourly rate paid for applicable hours worked
**Schedule:** 5:00pm - 5:30am, Monday - Friday
Ability to work holidays and weekends per business needs
Responsibilities
+ Operate, changeover, clean, troubleshoot, and complete basic maintenance according to company standards on production equipment consisting of fillers, labelers, case packers, palletizers, blow mold machines, wrappers, and forklifts
+ Record the following: preventative maintenance activities, quality inspection data, equipment downtime, production output and other key metrics
+ Adhere to safe work practices, good manufacturing practices, and participate in safe behavior observation programs
+ Communicate effectively when issues arise that prevent operating to company standards/procedures
+ Meet or exceed performance metrics including efficiency, production, and downtime
+ Perform mathematical calculations as needed
+ Ensure quality product is sent to customers by completing hourly quality checks
+ Inspect raw materials against quality standards before loading them
+ Interact with team members from various departments (Quality Assurance, Maintenance, etc.) to maximize output and efficiency
+ Attend shift, team, and plant meetings during their scheduled times
+ Measure and continuously improve the line operation as a team and with other technicians
+ Crosstrain in other areas to support operations during downtimes
+ Maintain your workstation in an organized and clean manner ensuring safety and good manufacturing practices
+ Focus on safe work practices and high quality while executing duties with a sense of urgency
Qualifications
+ High school diploma, GED or equivalent experience
+ Prior experience in clean manufacturing preferred
+ Ability to work the scheduled shift which includes start-up and handover meetings
+ Exposure to high-speed production and/or basic maintenance is preferred
+ Troubleshooting and root cause analysis experience
+ Ability to work on your own and with a team
+ Strong communication skills both face to face and over the radio
+ Computer skills with knowledge of Microsoft applications, SAP experience a plus
+ Forklift experience is preferred, but we are able to train new associates
+ Ability to lift and move 50 lbs. and stand on your feet for extended periods of time throughout the day
+ Ability to work in adverse environmental conditions, including inclement weather and changes in temperature
_Seasonal assignments offer valuable work experience at a leading beverage company. Also, if opportunities exist at the end of the assignment, you can be considered for this position with Primo Brands. Individuals in temporary and seasonal assignments are not eligible for all company benefits._
Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members.
Production Tech
Manufacturing technician job in Houston, TX
Job Details Houston, TX Seasonal AnyDescription
Job Title: Production Tech Seasonal Employment: Full-Time, including nights & weekends
Step into the excitement of Thirteenth Floor Entertainment Group, the nation's leader in immersive, story-driven live events and haunted attractions. As part of our seasonal team, you'll help create unforgettable experiences at this innovative special event that will thrill and delight guests across the country. We have a legacy of pushing the boundaries of themed entertainment with a culture fueled by creativity, collaboration, and fun. Working here means joining a passionate community that brings world-class events to life every night. If you're ready to be part of the magic behind the smiles, we want you on our team!
Job Summary
Ready to electrify the world of immersive horror? 13th Floor Entertainment Group-the nation's largest Halloween-themed entertainment company-is searching for a rare breed: a Haunt Production Tech with the skills and imagination to conjure unforgettable scares. In this unique role, you'll blend hands-on technical mastery with creative vision, building the magic behind the mayhem that thrills guests coast to coast.
Key Responsibilities
Maintain and troubleshoot addressable LED lighting systems and controllers.
Monitor and service audio playback equipment deployed throughout the event.
Operate, maintain, and service fog and snow machines to ensure consistent show quality.
Conduct nightly pre-show checks and post-show maintenance.
Assist with event setup and teardown, including installation and removal of lighting, control, audio, and effects equipment.
Respond swiftly and effectively to technical issues during live operations.
Document technical issues, resolutions, and inventory status.
Qualifications
Requirements
Must be at least 18 years old.
Experience with addressable LEDs (e.g., WS2811, WS2812) and lighting controllers (e.g., Falcon, Kulp).
Familiarity with audio systems for live events or installations.
Basic knowledge of AC/DC electrical safety and low-voltage wiring.
Ability to work outdoors in varying weather conditions.
Strong troubleshooting and problem-solving abilities..
Ability to lift 50 lbs and perform physically demanding tasks.
Preferred Qualifications
Experience with holiday or event lighting installations.
Familiarity with xLights or similar sequencing software.
Experience operating fog, haze, or snow effects machines.
Background in technical theater, theme parks, or live event production.
Schedule
Full-time seasonal, typically 40+ hours/week.
Day and occasional night shifts required during load-in and load-out.
Night and weekend shifts required during show run.
Thirteenth Floor Entertainment Group is an equal opportunity employer and values diversity at our company. We do not discriminate based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other protected status in accordance with applicable federal, state, and local laws. All qualified applicants are encouraged to apply.
Production Technician I - Night Shift
Manufacturing technician job in Houston, TX
Please Note: We are not accepting applications or inquiries from third-party staffing agencies or vendors for this position. All candidates must apply directly through our job postings.
Empower Your Future: At MetOx International, we're pioneering the next era of energy security and abundance through breakthrough superconducting technology. As a Production Technician I, you'll join a dynamic team committed to strengthening the world's energy systems to make them more resilient, efficient, and reliable.
Based at our global headquarters in Houston, TX, the Production Technician I at MetOx operates specialized equipment to manufacture, process, and package high-quality products in a clean, climate-controlled, high-tech environment. The Production Technician I uses advanced control systems to select recipes, monitor processes, and operate automated machines. Additionally, they develop skills to minimize equipment disruptions and provide insightful input to engineers for next-generation equipment design improvements.
Shift hours are 4:00 pm to 4:00 am, four days a week.
Key Responsibilities:
Production
Operates specialized equipment in accordance with standard operating procedures under supervision
Implements safe work practices and participates in a proactive safety culture to ensure the safety of employees, the public, and the environment
Completes training requirements and obtains certifications for assigned equipment
Conducts regular inspections of facility area and equipment
Maintains clean and organized work areas by using 5S methodology
Performs minor facility repairs and empties trash as needed
Performs basic maintenance activities according to Total Productive Maintenance (TPM) schedules
Works flexible hours and schedules to achieve manufacturing objectives
Assists in receiving goods, including gas cylinders and dewar deliveries
Other duties as assigned
Minimum Qualifications:
High School Diploma or GED and technical course work
1 year of experience in manufacturing environment or mechanical support role or equivalent education accepted.
Preferred Qualifications:
Associate's degree in applied science or relevant field
Knowledge, Skills, & Abilities:
Basic computer skills (MS Word and Excel)
Ability to log actions in tool or process history
Responsible, flexible, and able to handle multiple tasks under stressful or hazardous condition
Effective verbal and written communication with various stakeholders
Ability to work in a fast-paced, less defined environment
Efficient task completion
Problem-solving skills for machinery adjustments
Identifies minor process deviations and escalates the issues
Required to serve on the Emergency Response Team
Physical Demands: Frequent standing, walking, reaching with arms, using hands, talking, and hearing. Some sitting, climbing, stooping, crawling, or crouching will be needed. Frequent lifting/carrying/moving of up to 10 pounds will be needed and, in some instances, lifting/carrying/moving up to 50 pounds will be required, manually transport a load up to 75 lbs., apply up to 100-foot pounds of torque. The ability to adjust vision focus from near to far and peripheral is needed as well as the ability to distinguish the difference in colors.
Technicians must be clean-shaven to successfully complete the Fit Test and are required to maintain this grooming standard upon their start date. This is essential for the effective use of an Air Purifying Respirator (APR) during specific tasks, ensuring a safe work environment.
We will consider reasonable accommodation for employees who need them to perform their job effectively. If you require workplace accommodation, please inform us immediately.
MetOx is proud to offer competitive benefits including:
Health, dental, and vision available on the first day of employment
401(k) match
Paid parental leave & adoption assistance
Educational reimbursement
And more!
We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.
Auto-ApplySCM Production Tech 2
Manufacturing technician job in Pasadena, TX
Have you ever thought about being part of a company that reimagines chemistry every day to build a better world?
That's the purpose of Indorama Ventures, and we want you with us on this journey!
We are looking for innovative, collaborative professionals who are ready to embrace the challenge of working in a company that is constantly expanding internationally.
We value flexibility, partnership, and believe that the impact of our actions goes far beyond the chemical industry.
Here, diversity matters.
Our work environment is inclusive, diverse, and guided by respect, ethics, and equal opportunities for all.
What we're looking for:
What will be expected from you?
Access and navigate appropriate computer systems.
Perform daily responsibilities determined by Production Supervisor.
Perform routine inspections on Utilities when appropriate including boilers, cooling tower, air compressors, water softeners, wastewater, water systems, scrubbers, chillers, and nitrogen distribution looking for unusual conditions, hazards, improper operations and to complete associated checklists.
Perform routine inspections for Tank Farms when appropriate looking for unusual conditions, hazards, improper operations and to complete associated checklists.
Perform routine inspections for EO Unloading and Storage looking for unusual conditions, hazards, improper operations and to complete associated checklists.
Perform routine inspections for Unit 3200/3300 and associated utilities including Secondary Heating and Cooling Systems and Vacuum Systems looking for unusual conditions, hazards, improper operations and to complete associated checklists.
Perform packaging, railcar loading/unloading, truck loading/unloading, scaling in and out trucks and unloading of packaging materials from dropped trailers.
Perform LOTO, permitting and JSA's for responsible area.
Participate on emergency response team and perform environmental sampling.
Collect process samples and execute unit cleanings for changing campaigns.
Operate BPA system for Unit 3200 BPA additions and F-3250 Candle Filter system for Unit 3200 Filtration.
Operate forklift, yard mule, and track mobile.
Due to significant experience level required for this position, leadership is expected and must serve as an example and resource for less experienced members.
Inspect finished products for quality and adherence to customer specifications.
Complete packaging and bulk loading for customer orders
Complete General, Utility, Tank Farm, EO and Ethoxylation Production Training.
Set up and operate equipment in accordance with current good manufacturing practices and standard operating procedures with limited help from others.
Execute sampling and proper line-ups for product transfers.
Complete tank truck and railcar offloading/loading of raw materials and finished products.
Complete appropriate checklists on time and with attention to detail.
Participate in incident investigations.
Participate in troubleshooting when issues arise in responsible area.
Participate in PSSR review of changes that require MOC.
Execute educated, timely and safe decisions in the event of an emergency.
Prepare equipment for maintenance and/or project activities using applicable life safety procedures.
Report unsafe conditions to immediate supervisor or safety persons.
Enter service requests as necessary.
Execute EO unloading.
Collect process samples and execute unit cleanings for RE-201/T-301A, RE-301/T-301B, T-704A/B, T-801A/B, RE-360 and RE-760
Operate BPA system for Unit 3200 BPA additions and F-3250 Candle Filter system for Unit 3200 Filtration.
What are we looking for in the ideal candidate?
HS Diploma or equivalent
New hire with minimum of 5 years of experience in general operations or internal promotion from Specialty Chemistry Production Technician II
Ethylene Oxide handling experience preferred
Knowledge of utilities; boilers, compressors, cooling towers, scrubbers
Solid reading comprehension skills
Sense of ownership - feels responsible for the process and its outcome
Accountability for results and enlistment of partners
Integrative Attitude across functional teams, partnering and sharing of information, experience and knowledge
What can we offer you?
Indorama Ventures - Indovinya is a global and innovative chemical company, offering sustainable and high-value solutions for the long-term success of our customers. As producers of solutions used in Crop Solutions, Energy & Resources, Home & Personal Care, Coatings, Performance Products, and other applications, we are present in the daily lives of millions of people around the world. The successful candidate will receive a competitive compensation and will be eligible to participate in a comprehensive benefits package which includes: medical, vision and dental, basic life insurance, AD&D insurance, and 401k. Here, you can make an impact and make a difference. Come join us!
What do we offer?
A competitive compensation package, including:
⢠Health insurance
⢠WellHub / TotalPass
⢠Life insurance
⢠And other exclusive benefits
The division you'll be joining is a global leader in the chemical industry. We offer a broad portfolio of solutions and high delivery standards to markets such as Crop Solutions, Home and Personal Care, Coatings, Energy & Resources, and Performance Products.
Here, you can make a difference. Join us!
Auto-ApplyProduction Technician
Manufacturing technician job in Liberty, TX
Production Technician-25002185 Description Job Overview:The LGUS HyCO division of Linde, Inc. is currently seeking a Production Technician in Liberty, TX. The production technician, working under the direction of lead technicians and the facilities manager, has responsibility for supporting day-to-day operations at the Moss Bluff facility.
The facility produces supports the hydrogen pipeline via hydrogen storage in a salt cavern and boosting capabilities, this site also runs and supports a PSA site in Baytown.
In this role, you will be responsible for operating the equipment associated with PSA, compressors, dryers, Salt Caverns, and oil removal systems.
Primary Responsibilities:Adjustments to process variables.
Startup and shutdown of process equipment.
Preparing equipment for maintenance work including lock-out tag-out.
Correctly and safely permit maintenance work.
Monitoring equipment performance.
Responsibilities require 12-hour shift rotation, on-call, and scheduled overtime.
Effectively communicate with fellow operators, technicians, engineers, and managers.
Adhere to all Corporate and Plant policies.
Maintain the highest degree of personal safety and environmental accountability at all times.
Maintain high standards of housekeeping.
Participate in daily and monthly safety and production meetings.
Qualifications Qualifications:HS Diploma.
Associate degree preferred.
2 years Production/Operations experience or equivalent industrial experience.
Working extended hours and/or weekends, holidays and call-ins may be required.
About Linde:Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion.
We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet.
Culture:At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion.
Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent.
For more information about the company and its products and services, please visit www.
linde.
com.
Benefits:Linde Gases US offers competitive compensation and an outstanding benefits package.
Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth.
Additional compensation may vary depending on the position and organizational level.
Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law.
#LI-PL1Primary Location Texas-LibertySchedule Full-time Job - OperationsUnposting Date Ongoing
Auto-ApplySr. Production Technician
Manufacturing technician job in Spring, TX
Our core values - Stewardship, Character, Collaborate, Learn, Disrupt - are the lens through which we evaluate every business decision. As a dynamic, growing company that offers extremely competitive compensation and benefits, our employees are our most valued assets and the foundation of Expands performance among our E&P competitors.
We seek applicants from all backgrounds to ensure we get the best, most creative talent on our team. We realize that, historically, underrepresented groups feel the need to be 100% qualified in order to apply. If you meet any combination of our requirements, we encourage you to apply. We strive to hire people from a wide variety of backgrounds, not just because it's the right thing to do, but because it makes our company stronger.
Job Summary
This senior level position coordinates with other departments as needed to resolve problems and provide technical support in order to assist with engineering operations.
Job Duties & Responsibilities
* Performs data management activities, which include report/tool creation, loading/entering, verifying, manipulating, analyzing, and reporting data related to engineering operations
* Performs engineering calculations and preliminary analyses for interpretation of data and provides information to engineers
* Performs advanced data analysis and makes recommendations based on interpretation of data
* Recommends design improvements using complex, but established procedures
* Coordinates data transfer and updates shared data sources among departments
* Utilizes software to discover trends in operational data and reports
* Applies skills and concepts to ensure data integrity, data reliability, and data accessibility throughout the group
* Provides basic, discipline-specific training to new systems users
* Performs other duties as assigned
Job Specific Skills
* Advanced ability to use rigorous logic, critical thinking skills, and methods to solve difficult problems with effective solutions
* Advanced ability to build numerical and analytical tools using standard industry and corporate software
* Strong knowledge of Production, Capital/Expense, and Workover reports
* Strong knowledge of PC/mainframe systems
* Strong knowledge of database application software
* Ability to communicate well across multi-disciplinary teams, including teams that are geographically separated
* Ability to learn and apply new concepts
Education
Minimum: High school diploma or GED
Preferred: Bachelor's degree - from accredited university - Engineering Technology, Math, Science, or related field
Experience
Minimum: 5 - 8 years related work experience
Expand Energy takes necessary action to ensure that all applicants are treated without regard to their race, color, religion, sex, sexual orientation, age, gender identity, national origin, genetic information, disability, pregnancy, military or veteran status or any other protected characteristic as established by law.
Expand Energy Corporation's operations are focused on discovering and developing its large and geographically diverse resource base of unconventional oil and natural gas assets onshore in the United States.
Technical Manufacturing Engineer
Manufacturing technician job in Houston, TX
The Technical Manufacturing Engineer, DFM and VAVE, will be responsible for reviewing designs from R&D Engineering by assessing the manufacturability of parts (including turning, milling, drilling, grinding, boring, additive manufacturing, etc.) and recommending improvements to reduce product costs, utilizing DfM (Design for Manufacturing) and DtC (Design to Cost) strategies. He or she will also support VAVE (Value Analysis Value Engineering) initiatives by proposing design enhancements and conducting should-cost analyses. This individual will work closely with cross-functional teams such as Engineering, Sourcing, and Internal Manufacturing.
Roles & Responsibilities
Supports engineering and product development teams to conceptualize, design new products and technologies, using the latest technologies to reach target costs (DtC) and improve parts manufacturability (DfM).
Perform machining analysis to improve parts machinability by performing analysis on turning, milling, drilling, grinding, boring, additive manufacturing, etc, of the parts.
Develop and implement best practices in advanced manufacturing techniques, including 3D printing, automation, and digital technologies.
Collaborate with production teams, internal and external, to optimize manufacturing processes, increase efficiency, and reduce costs.
Perform should-cost analysis to estimate the fair cost of materials, components, and manufacturing processes.
Support source negotiations by conducting deep dives on the costs and providing data-driven recommendations.
Collaborate with suppliers and customers to ensure timely delivery and high-quality products.
Stay current on industry trends and technologies and bring new ideas and concepts to the team.
Performs other duties as needed to support the Supply Chain organization.
Experience & Education
REQUIRED
Bachelor's degree in Mechanical, Industrial, or related Engineering or commensurate experience.
3+ years' of experience in Technology in an environment of both manufactured and sourced finished goods and/or related supply chain management, including design, implementation, and execution of manufacturing processes.
Strong expertise in machining techniques and programming, including milling, turning, grinding, and drilling.
Ability to read and interpret technical drawings and specifications, and experience in using CAD/CAM software for programming CNC machines.
Experience in selecting cutting tools, setting up machines, and monitoring their performance to ensure quality and efficiency.
Knowledge of materials and their behavior during machining, and experience in selecting the appropriate cutting parameters and feeds and speeds.
PREFERRED
MBA or Master's degree in Engineering, Supply Chain Management, or equivalent.
Proficient with aPriori, Windchill and Oracle.
Proficient with Microsoft Office Products.
Experience with Oil and Gas downhole tools.
Knowledge, Skills & Abilities
REQUIRED
Demonstrated understanding of financial systems and the key drivers.
Strong interpersonal and collaborative skills, as well as strong skills as a negotiator to reach consensus, alignment, and commitment.
Committed person with a flexible attitude to work patterns.
Able and willing to push through constraints in an engaging and collaborative manner.
Methodical and naturally inquisitive mindset.
Proven ability to manage and lead projects over a matrix organization.
PREFERRED
Change management and transformational change experience.
Travel Requirement:
This role may require domestic and potentially international travel of up to: 10-25%
#LI-KP1
Auto-ApplyElectromechanical Technician
Manufacturing technician job in Houston, TX
Come join our team! We are a competitive employer offering medical, dental, vision and 401K match!
This role will have the ability to assemble, trouble shoot, install, test and maintain electrical or electronic wiring, equipment, appliances, apparatus and fixtures
Maintain electrical equipment to meet regulatory codes at the country, state and federal levels
Perform safety-related functions and other miscellaneous electrical functions
Competent with configuration of VFD's
Must possess demonstrated ability to safely utilize a forklift and high lift
Knowledge and ability to troubleshoot PLC's
Must be physically capable of performing work from ladders, scaffolds, and roofs to install, maintain or repair electrical wiring, equipment and fixtures
Proficient in testing and troubleshooting electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and megaohmeters, to ensure compatibility and safety of system
Utilizing systematic approach to trouble shooting and problem solving and avoid replacing parts.
Technical Skills
Basic Electricity & Electronics
DC Equipment & Controls
Batteries & DC CircuitsĀ· Single-Phase Motors
Transformers & AC Circuits
Three-Phase Systems
Electrical Measuring Instruments
Electrical Safety & Protection
Electrical Troubleshooting
Power Supplies
Digital Logic Systems
Input/Output Devices
Ability to read Electrical Schematics and mechanical blueprints
Ladder logic knowledge
Variable Frequency Drives
Programmable Logic Controllers
Knowledge and prior experience with Hydraulics
Qualifications
High School diploma or equivalent
Preferred Electrician License or two year electrical program
Candidates will be required to pass a pre-employment background, drug and work screen
Must be available to work 12 hour day and night shifts, weekends, call-outs and overtime
Electromechanical Technician
Manufacturing technician job in Houston, TX
Job DescriptionSalary:
Come join our team! We are a competitive employer offering medical, dental, vision and 401K match!
This role will have the ability to assemble, trouble shoot, install, test and maintain electrical or electronic wiring, equipment, appliances, apparatus and fixtures
Maintain electrical equipment to meet regulatory codes at the country, state and federal levels
Perform safety-related functions and other miscellaneous electrical functions
Competent with configuration of VFDs
Must possess demonstrated ability to safely utilize a forklift and high lift
Knowledge and ability to troubleshoot PLCs
Must be physically capable of performing work from ladders, scaffolds, and roofs to install, maintain or repair electrical wiring, equipment and fixtures
Proficient in testing and troubleshooting electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and megaohmeters, to ensure compatibility and safety of system
Utilizing systematic approach to trouble shooting and problem solving and avoid replacing parts.
Technical Skills
Basic Electricity & Electronics
DC Equipment & Controls
Batteries & DC Circuits Single-Phase Motors
Transformers & AC Circuits
Three-Phase Systems
Electrical Measuring Instruments
Electrical Safety & Protection
Electrical Troubleshooting
Power Supplies
Digital Logic Systems
Input/Output Devices
Ability to read Electrical Schematics and mechanical blueprints
Ladder logic knowledge
Variable Frequency Drives
Programmable Logic Controllers
Knowledge and prior experience with Hydraulics
Qualifications
High School diploma or equivalent
Preferred Electrician License or two year electrical program
Candidates will be required to pass a pre-employment background, drug and work screen
Must be available to work 12 hour day and night shifts, weekends, call-outs and overtime