Manufacturing technician jobs in Huntington Beach, CA - 571 jobs

The Manufacturing Engineering Technician is a hands-on role responsible for supporting the development, improvement, and scaling of assembly and test processes for a Class III medical device. This position serves as a critical link between design and production by supporting process validations, maintaining and troubleshooting equipment, documenting manufacturing processes, and assisting with pilot and low-volume manufacturing operations. The role requires strong technical aptitude, attention to detail, and a quality-focused mindset. The Manufacturing Engineering Technician works closely with cross-functional teams including Mechanical, Electrical, Biomedical Engineering, Quality, and Operations to support the delivery and scale-up of a regulated medical device in a fast-paced environment. This position requires the ability to work independently with minimal supervision. Key Responsibilities This job description reflects the general nature and level of work performed and is not intended to be an exhaustive list of all responsibilities. Equipment Maintenance and Calibration Set up, operate, and maintain production and test equipment in accordance with manufacturing instructions and quality standards. Support equipment qualifications (IQ/OQ/PQ), process validations, and test method validations. Perform routine maintenance and calibration to ensure optimal equipment performance. Troubleshoot and resolve equipment issues to minimize downtime. Build products in compliance with environmental controls, hygiene requirements, procedures, and work instructions. Develop and support assembly and test fixtures per approved documentation. Inspect incoming supplier components against quality inspection requirements. Test, inspect, and measure finished products, components, and devices to verify compliance with functional specifications. Troubleshoot, adjust, repair, and perform root cause analysis on finished products and components. Process Support Assist in the development, optimization, and documentation of manufacturing processes. Support engineers in implementing process improvements to improve efficiency, quality, and cost. Assist Quality and Purchasing teams with inventory tracking and documentation. Support the creation, modification, review, and execution of work instructions, assembly drawings, manufacturing processes, protocols, reports, records, and engineering change documentation. Quality Assurance Conduct in-process and final inspections to ensure products meet quality and regulatory requirements. Document and report nonconformances and defects. Support failure analysis, root cause investigations, and corrective and preventive actions (NCRs, CAPAs). Maintain cleanroom and controlled manufacturing environments in compliance with housekeeping, ESD, and 5S standards. Documentation and Compliance Maintain accurate records related to equipment maintenance, calibration, and process changes. Ensure all activities comply with FDA regulations, ISO 13485, and Good Manufacturing Practices (GMP). Collaboration and Training Collaborate closely with manufacturing engineers, quality personnel, and production teams to support daily operations. Provide technical support and training to manufacturing operators on equipment and processes. Continuous Improvement Identify opportunities for process, equipment, and workflow improvements. Participate in Lean Manufacturing, Six Sigma, or continuous improvement initiatives as required. Qualifications, Knowledge, and Experience Education and Experience Associate degree or certification in Engineering Technology, Mechanical Engineering, Biomedical Engineering, or a related field; or equivalent hands-on experience. Minimum of 3 years of experience in manufacturing, assembly, or production, preferably in medical devices, pharmaceuticals, or other regulated industries. Skills and Competencies Strong ability to follow detailed procedures and accurately document work. Solid understanding of manufacturing processes and quality systems. Strong verbal and written communication skills. Ability to work independently and collaboratively in a regulated environment. Physical Requirements Ability to perform light material handling tasks, including lifting up to 35 pounds for short durations. Ability to sit for extended periods, including shifts of 8 hours or more. Frequent keyboard and computer use. Willingness and ability to wear cleanroom attire (gown, gloves, mask, etc.) for the duration of assigned shifts.

The Electromechanical Technician will troubleshoot and repair primarily microprocessor-based controls used in LED message signs and light towers. This role involves working closely with customers to identify the cause of failures and provide effective repair solutions. This position requires a solid foundation in technical skills and a commitment to delivering excellent customer service. Occasional travel of up to 25% may be required. Key Responsibilities: Review work requests, wiring diagrams, drawings, and specifications to plan repair activities. Test controls and components to identify issues and determine repair requirements. Diagnose and repair faulty electronic components, including resistors, capacitors, ICs, and other circuit elements. Use voltmeters, ammeters, and oscilloscopes to probe circuits and locate failures. Repair printed circuit boards (PCBs) by replacing through-hole and surface-mount components, or by restoring damaged traces. Perform wiring, stripping, soldering, and crimping as needed. Maintain accurate documentation of all repairs, updates, and modifications to drawings or schematics. Communicate directly with customers to help identify root causes and recommend corrective actions. Provide technical support and occasional field service assistance. Qualifications: 5+ years of experience in a technical role involving electronic circuit repair. Strong mechanical and electrical aptitude with the ability to troubleshoot and repair complex electronic equipment. Proficient in reading and interpreting technical manuals, schematics and wiring diagrams. Experienced with test equipment such as multimeters and oscilloscopes. Excellent problem-solving and analytical skills. Advanced knowledge of analog and digital circuits. Hands-on experience with PCB rework and component replacement (through-hole and surface mount). Ability to work independently and manage multiple tasks simultaneously. Excellent communication and interpersonal skills, with a customer-focused approach. Fluent in English (verbal and written). Proficient with computers, experience with Microsoft Word and Excel is a plus. Associate (AA) or Bachelor's (BA) degree in a related field is preferred. Quality control (QC) experience is a plus. About National Signal: National Signal is a manufacturer of portable solar construction equipment, traffic safety products, and LED signs - specializing in solar-powered LED light towers, message signs, arrow boards, plus new in 2025 our solar-powered generators and mobile surveillance trailers. Headquartered in La Mirada, California, we are a member of the HS Roads & Security division of Hill & Smith Holdings PLC, based in Birmingham, England and publicly traded on the London Stock Exchange. Our worldwide Group Purpose is to “Create sustainable infrastructure and safe transport through innovation.” What We Offer Competitive compensation Health, dental, vision, short & long-term disability, and life insurance options 401(k) with company match Paid time off and holidays Supportive and team-oriented work environment We are an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran, or disability status.

Work Type: Full-time, On-site About the Role The Senior Engineering Technician supports the build, test, and refinement of Evotrex power-generating RV prototypes and vehicle systems. This is a hands-on role working closely with engineering, design, manufacturing, and go-to-market teams to turn concepts into reliable, production-ready hardware and keep prototypes in top condition for public-facing use such as future-owner touring, community events and tradeshows. Key Responsibilities Prototype Build & Integration • Build, modify, and integrate prototype systems across mechanical, electrical, and structural areas. • Support installation of power, chassis, interior, and body systems. • Prepare vehicles and subsystems for testing, demos, and field use. Testing, Validation & Troubleshooting • Set up and execute engineering tests, including instrumentation and data collection. • Document results and support analysis with engineers. • Diagnose and resolve hardware and system issues. • Support root-cause analysis and design iteration. Prototype Support for Marketing & Sales • Maintain and service prototype vehicles used for marketing, sales, and public events. • Prepare prototypes for shows, demos, test drives, photo shoots, and media events. • Support on-site technical needs during key events when required. Workshop & Cross-Functional Support • Fabricate simple parts, fixtures, and test setups using shop tools. • Maintain a safe, clean, and organized workshop environment. • Support collaboration between engineering, manufacturing, operations, and go-to-market teams. • Mentor junior technicians when needed. Qualifications Required • 8+ years of hands-on experience as an engineering technician, prototype builder, or similar role (RV and electric vehicle systems experience required). • Proficiency using hand tools and power tools in a mechanical and electrical integration environment. • Strong troubleshooting and systems diagnostic capabilities. • Experience preparing and executing engineering tests (setup, sensors, data acquisition). • Comfortable reading and interpreting engineering drawings/schematics. Preferred • Prior experience in automotive, RV, aerospace, or consumer hardware environments. • Familiarity with LabVIEW or data acquisition interfaces. • Experience with DFMEA process, test procedure development, and design iteration. • Machine shop experience (basic fabrication, jigs, fixtures). • Excellent communication and documentation skills. Core Competencies • Hands-on problem solving: Thrives in a workshop environment with an engineer's mindset. • Adaptable & resilient: Flexible in managing changing priorities in a fast-moving startup. • Collaborative: Works well with cross-functional teams, values shared ownership of outcomes. • Quality & safety: Strong commitment to safe practices and high workmanship standards. • Chinese & English bilingual is a plus Benefits at Evotrex Competitive, high-growth compensation: Market-competitive salary with performance-based upside, designed to grow as Evotrex grows. Health, 401(k) & PTO: Comprehensive medical, dental, and vision coverage, a 401(k) program to help you plan for the long road ahead, and a generous 15-day PTO so you can recharge and explore. Quarterly Company Camping Trips: Every quarter, the team heads outside together-camping, exploring, and testing our products the way they're meant to be used. Work in The Wild - Up to 2 Weeks a Year: Work remotely from national parks, forests, coastlines, or anywhere adventure calls (open to selective roles). Domestic and International Travel Opportunities: Travel across the U.S. and abroad for product testing, events, media, partnerships, and adventures tied directly to the Evotrex mission. About Evotrex Evotrex is a California-based company transforming outdoor travel with intelligent, power-generating RVs built for adventure without limits. Founded by enthusiasts and innovators, Evotrex sets a new standard in the RV industry by blending proven technology, an automotive supply chain, and efficient manufacturing to deliver off-grid freedom with contemporary comfort. Engineered and validated for quality, durability, and seamless indoor-outdoor living, each model is designed to withstand the elements while unlocking new possibilities outdoors. For more information, please visit *************** and join our community on LinkedIn, X, YouTube, Discord, Instagram, and Facebook.

Details: Additive Manufacturing Technician (Aerospace/Defense/Space) Pay: $38-$43/hour Our client is a leader in advanced metal additive manufacturing (AM) supporting aerospace, defense (ultra-secure), and space programs. They build and certify production flight hardware and are part of a next-generation ecosystem pushing the boundaries of AM technology. If you want to work hands-on with industry-leading EOS and SLM systems, support flight-critical production, and grow in a high-tech manufacturing environment, this role is a strong fit. Operate and maintain advanced metal AM machines (EOS M290/M4K, SLM 280, NXG, SLM500). Perform machine setup, calibration, and daily maintenance to ensure reliable builds. Handle metal powders safely-including sieving, sampling, loading, and cleanup-while maintaining full material traceability. Remove supports, self-inspect parts, and verify dimensional accuracy using calipers, micrometers, dial indicators, and other precision tools. Monitor builds according to a flexible machine schedule. Document test procedures, track build data, and suggest process improvements. Collaborate with engineering and operations teams to solve problems and optimize repeatability. Maintain a clean, safe work environment with proper PPE (respirators, gloves, protective footwear, eye/ear protection). Contribute to continuous improvement initiatives and support operational excellence. Details: What You Need to Bring to the Table Preferred: 2+ years in additive manufacturing or a comparable advanced manufacturing environment. Required: Ability to work flexible hours aligned with machine build schedules. Required: U.S. Person (ITAR-compliant) and ability to obtain/maintain a security clearance. Experience using hand, power, and pneumatic tools. Familiarity with AM processes, raw materials, powder handling, and quality control standards. Strong understanding of AM equipment-especially EOS or SLM systems. Ability to read/interpret work instructions, follow detailed procedures, and maintain accurate documentation. High attention to detail with strong organizational and communication skills. Comfort with physical requirements: standing for extended periods, lifting up to 50 lbs, using digital interfaces, and occasionally climbing, kneeling, or crouching. Why This Role Matters You'll be directly supporting the production of flight-ready hardware for aerospace, defense, and space applications. This is a high-impact, hands-on role where you'll learn cutting-edge AM technologies and help shape the next generation of advanced manufacturing.

**Dreaming big is in our DNA. It's who we are as a company. It's our culture. It's our heritage. And more than ever, it's our future. A future where we're always looking forward. Always serving up new ways to meet life's moments. A future where we keep dreaming bigger. We look for people with passion, talent, and curiosity, and provide them with the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do?** **SALARY:** $33.83/hr + 4.25 hours of daily OT **SHIFT:** 12 hours (rotating days/nights) every quarter **COMPANY:** Michelob ULTRA. Cutwater Spirits. Budweiser. Kona Brewing Co. Stella Artois. Bud Light. That's right, over 100 of America's most loved brands, to be exact. But there's so much more to us than our top-notch portfolio of beers, seltzers, and more. We are powered by a 19,000-strong team that shares our passion to create a future with more cheers. We look for people with talent, curiosity, and commitment and provide the teammates, resources and opportunities to unleash their full potential. The power we create together - when we combine your strengths with ours - is unstoppable. Are you ready to join a team that dreams as big as you do? **ROLE SUMMARY** **:** Sitting behind a desk all day was never your style. Rolling up your sleeves and solving tangible problems? That's more like it. If you are passionate about maintenance and troubleshooting while working in a fast paced environment, Anheuser-Busch could be your last stop in fulfilling your career. Our Maintenance Technicians are the key in guaranteeing that our quality is where it needs to be: the very best. If you are looking for a new challenge, come join our team today! As a Maintenance Technician, you will operate, maintain, troubleshoot, and repair high speed manufacturing equipment. You would also be responsible to perform quality checks by using powerful quality reporting systems. If you think you've got what it takes, we want to hear from you! **JOB R** **ESPONSIBILITIES** **:** + Operate, maintain troubleshoot and repair high speed manufacturing equipment + Responsible for prioritization of operation and maintenance on multiple pieces of manufacturing equipment + Perform quality checks and recording them in our automated quality control systems + Interpret data to make quality and productivity decisions, we're a data driven company + Perform routine and emergency maintenance on process equipment + Maintain our work area in accordance with all sanitation and housekeeping standards, safety is our first priority **JOB QUALIFICATIONS** **:** + High School Diploma or GED + 1-3 years of industrial experience, preferably in a high-speed manufacturing or packaging environment + Proficient in mechanical troubleshooting + Able and willing to work a rotating 12-hour and other alternate work schedule, including day and night shift rotations, and required weekend and holiday hours + Able and willing to work mandatory overtime as required + Superior work history, including good attendance + Knowledge of safety policies and procedures **WHY ANHEUSER-BUSCH:** At Anheuser-Busch, our purpose is to create a future with more cheers. For more than 165 years, we have delivered a legacy of brewing great-tasting, high-quality beers that have satisfied beer drinkers for generations. 99 percent of the products we sell in the U.S are made in the U.S. with more than $700 million in high-quality ingredients sourced from American farmers and more than $7 billion in goods and services purchased from U.S. suppliers, and we have invested nearly $2 billion in our 100 facilities across the country over the past five years. Through these investments, and as a leading American manufacturer and the nation's top brewer, we drive economic prosperity nationwide through investments in our people, facilities, and communities. We are the only brewer that invests in the U.S. at this scale. **B** **ENEFITS** **:** + Health benefits including Medical, Dental, Vision, Wellness and Tax-Advantaged Savings and Spending Accounts + Life Insurance and Disability Income Protection + 401(k) Retirement Savings options with a company matching contribution + Chance to work in a fast-paced environment among a company of owners + Free Beer! \#AC-E **WHY ANHEUSER-BUSCH:** Anheuser-Busch is here for the times that matter. The moments where we celebrate, defy challenges, dream of the brighter future we are building today- and all the moments in between. We are a company that brings people together for richer conversations, sweeter celebrations and stronger communities. As the leading global brewer, Anheuser-Busch InBev is committed to finding innovative ways to continually improve. It's this kind of thinking that creates a unique work environment by rewarding talent and encouraging forward thinking. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability status or any other characteristic protected by applicable law. **REQUIRE ADDITIONAL ASSISTANCE?** Anheuser-Busch is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you are a qualified individual with a disability, or a disabled veteran, you have the right to request a reasonable accommodation if you are unable or limited in your ability to use or access the Anheuser-Busch Careers website as a result of your disability. We will make a determination on your request for reasonable accommodation on a case-by-case basis. If you need an accommodation or assistance in using the Anheuser-Busch Careers website, please email disabilityaccommodation@anheuser-busch.com . _Disclaimer: Anheuser-Busch does not charge for any part of the hiring process. Additionally, the company will only share information via official channels including the company website and from Anheuser-Busch email accounts. If you have any questions or concerns, please email the Anheuser-Busch recruitment team at_ _***************************************_ _._ **CONTACT US (***************************************)** **EQUAL OPPORTUNITY EMPLOYER** **PRIVACY POLICY (***************************************************** **TERMS AND CONDITIONS** **PAY TRANSPARENCY POLICY STATEMENT (**********************************************************************************

Job Description Qualifications: This site uses Kronos for timekeeping. Manufacturing Forklift experience Packaging Responsibilities: Manufacturing Forklift experience Packaging Comments/Special Instructions What is the working schedule for this position - 1st shift, 6:00 AM - 2:30 PM What experiences/skills would stand out on a resume for this position (Must haves VS Nice to have) - We would like someone with prior manufacturing experience. Will there be a possibility of an extension for this role or is this a temp- to -perm - There may be an opportunity to hire permanently for this role. Will Overtime be offered - We may have OT as well. What would the interview process look like (in-person or teams, will there be a 2nd interview) - In-person interview Does the worker need to come with PPE, or will it be provided if required if needed - We will provide the PPE\'s, but the worker needs to have steel toed boots. Is the facility a temperature-controlled environment - Yes.

THE ROLE: * Travel Requirement: None * FLSA Status: Non-Exempt * Shift: 3rd shift 11:00PM to 7:30AM * Employment Category: Full Time - Regular * Pay Range: $21.00 to $25.00/hr. Generous Brands is dedicated to inspiring people to thrive through the power of vibrant nutrition through its leading brands, Bolthouse Farms, Health-Ade, and Evolution Fresh. Generous Brands partners with SAMBAZON to manufacture, distribute and sell SAMBAZON branded beverages. Bolthouse Farms is a pre-eminent provider of chilled juice, smoothies, shakes, and protein drinks. Health-Ade is the fastest growing kombucha brand, dedicated to creating bubbly beverages that boost gut health. Evolution Fresh is a premier cold-pressed juice brand with national availability. And, SAMBAZON beverages bottle the superfruit power of acaí in juice and natural energy cans. The company operates its North American business from facilities in Southern California, and the Greater Chicago Area. To learn more, please visit *********************** WHAT YOU'LL BE RESPONSIBLE FOR IN THIS ROLE This position contributes to Evolution Fresh success by supporting and operating product packaging equipment in a juicing plant. Models and acts in accordance with Evolution Fresh guiding principles * Operates and maintains downstream secondary equipment * Replenishes raw materials on automated packaging equipment * Responds to stoppages on secondary packaging equipment and conducts troubleshooting, jam clearing and Cleaning * Performs changeovers on secondary packaging equipment and assists machine operator with changeover on primary packaging equipment * Responsible for quality checks on secondary packages, including lot coding and aesthetics * Assists machine operator with quality checks on primary packages, including lot coding, aesthetics, and seal Integrity * Tracks output from the palletizing equipment and responds to jams * Operates the supersack loading station * Demonstrates and understands safety as a core value and follows the key essentials to safety as set forth by our safety resolution; reinforces and coaches others to do the same * Understands and follows established safety guidelines, consistently complies with all safety procedures (e.g. PPE, Lock Out Tag Out) * Supports food safety, legality and quality programs * Maintains product quality through adherence to good manufacturing practices, Food Safety Preventative Controls, product specifications and quality procedures. Monitors and documents quality measures using analytical tools * Performs other duties as needed in support of business objectives and Evolution Fresh Mission & Values * Maintains regular and consistent attendance and punctuality WHAT WE'RE LOOKING FOR MINIMUM QUALIFICATIONS: * High School diploma/GED or equivalent experience * Production or distribution environment (1 year) * Operation of manual and automated packaging equipment (1 year) ADDITIONAL REQUIRED QUALIFICATIONS: * Basic math skills * Ability to follow verbal direction * Proficiency in Microsoft Windows and internet environments * Mechanical aptitude to make minor machine adjustments and clear jams in equipment * Ability to perform quality tests using analytical tools * Ability to gather, record on operational and quality metrics, through manual or automated systems * Ability to understand written policies and guidelines, specifications, and safety standards * Ability to work with a diverse team environment * Ability to work in accordance with safety, quality and sanitation standards, policies, and procedures * Ability to work variable shifts to support business needs PREFERRED QUALIFICATIONS: * Experience performing quality tests using analytical tools * Troubleshooting skills * Familiarity with food safety regulatory requirements and global standards including Preventive Controls for Human Food (FDA Code of Federal Regulations) and the Global Food Safety Initiative (GFSI). Experience with the GFSI certification schemes (i.e. BRC and/or or SQF) PHYSICAL DEMANDS: * O = Occasional (up to 25% of time) * F = Frequent (26%-74% of time) * C = Constant (75% or more of time) WHAT WE OFFER plus more! Our rich benefits packages are designed to support the health and well-being of both our eligible team members and families. * Medical, Dental & Vision * Group Life and AD&D * Voluntary Life and AD&D * Group Short & Long-Term Disability * 401(k) * Paid Time Off * Flexible Spending Accounts * Employee Assistance Program * Gym Membership Discounts EQUAL EMPLOYMENT OPPORTUNITY We are an equal opportunity employer committed to fostering a culturally diverse organization. We strive for inclusiveness and a workplace where mutual respect is paramount. We encourage applications from a diverse pool of candidates, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, religion, sex, age, national origin, disability, sexual orientation, gender identity and expression, or veteran status. We will provide reasonable accommodation for qualified individuals with disabilities, as needed, to assist them in performing essential job functions. REASONABLE ACCOMMODATIONS Reasonable accommodations will be made to enable individuals with disabilities to perform the essential functions. If you are interested in applying for employment with Generous Brands and need special assistance to apply for a posted position, or if you believe you do not meet any of the required qualifications of a posted position due to a protected disability and would like to explore the possibility of an accommodation, please contact our Talent Acquisition team at *******************************. RECRUITMENT AGENCIES: Generous Brands does not accept unsolicited agency resumes. Generous Brands is not responsible for any fees related to unsolicited resumes. #LI-CG1 3rd shift 11:00PM to 7:30AM

Rocket Lab is an end-to-end space company delivering responsive launch services, complete spacecraft design and manufacturing, payloads, satellite components, and more - all with the goal of opening access space. The rockets and satellites we build, and launch enable some of the most ambitious and vital space missions globally, supporting scientific exploration, Earth observation and missions to combat climate change, national security, and exciting new technology demonstrations. Our Electron rocket has become the second most frequently launched U.S. rocket annually and has delivered more than 230 satellites to orbit, all while we work to develop Neutron, our upcoming medium-lift, reusable launch vehicle for larger constellation deployment. Our Space Systems business designs and builds our extensive line of satellites, payloads, and their components, including spacecraft that have been selected to support NASA missions to the Moon and Mars and components used on the James Webb Space Telescope. NEUTRON Neutron is a medium lift launch vehicle capable of delivering the mega constellations of tomorrow, high assurance payloads, and human spaceflight. As a highly reusable launch platform, Neutron will deliver a highly cost-effective and reliable launch solution leveraging Rocket Lab's proven execution history with the Electron program. If you're interested in joining a high performing team, pushing the boundaries with a clean sheet development of re-usable liquid launch vehicle, this is your opportunity! ADDITIVE MANUFACTURING TECHNICIAN II - 2ND SHIFT Based onsite at Rocket Lab's global headquarters in Long Beach, California the Additive Manufacturing Technician II is responsible for supporting various Additive technologies (LPBF, DED, Hybrid Solutions) with various alloys. This role will support all Additive processes involved with the Rutherford & Archimedes engines. You will support the Manager of Additive Manufacturing and Production Additive Manufacturing organization, with deliverables required for internal leadership, board of directors, and investors. This opening is for 2nd shift Monday - Friday from 1pm-9:30pm PST. WHAT YOU'LL GET TO DO: Uphold and follow all Additive safety measures - be an advocate for safe operations. Prepare additive print jobs for success through attention to detail on setups. Operate a variety of metal 3D printers, experience with EOS, SLM, & DMG preferred. Identify and troubleshoot mechanical, optical laser, electrical, and build issues. Conduct calibration of 3D Printers and interpret findings with Engineering. Ensure conformance of part/build through independent inspection and print detail verification. Follow work orders, procedures, specifications, and test instructions with attention to detail. Communicate any issues that are found. Perform daily, weekly, and monthly preventative maintenance - as directed by Engineering. Provide process improvement feedback and implement solutions in collaboration with Engineering. Collaborate with Engineers on setup and fabrication of 3D prints and new hardware. Kick off issue tickets based on process/product non-conformances. Drive Additive Internal 5S system with actions promoting sustainability in the Additive Department. Utilize measurement tools (micrometer, caliper, surface plate etc.) to ensure high quality inputs and outputs, including post-print inspection and post-processing inspection. YOU'LL BRING THESE QUALIFICATIONS: 2+ years of experience in a manufacturing, fabrication, assembly or testing environment. High School diploma or GED. Proficient in hand, power, and pneumatic tools such as drills, chisels, taps. Proficient in inspection methods: surface plate, calipers, micrometers, height gauge. Experience with operating machine tools: vertical mills, lathes, media blasters, cranes, or forklifts THESE QUALIFICATIONS WOULD BE NICE TO HAVE: 4+ years of experience with operating metal 3D printers and knowledge of associated hazards Experience with Additive Manufacturing (AM) principles. Proficient with Microsoft Office. Experience interpreting engineering drawings. Experience using JIRA. ADDITIONAL REQUIREMENTS: Ability to work the following shift, Monday-Friday 1pm-9:30pm PST. Standing for long periods of time, climbing up and down ladders, bending, grasping, sitting, pulling, pushing, stooping, and stretching may be required to perform the functions of this position Able to lift up to 25lbs. unassisted Must be able to climb ladders and be comfortable working in tight spaces. Must be able to move repetitively, bend or twist, and use hands to handle, control, or feel objects, tools or controls. Must be able to walk or stand for extended periods - 8 hours min Level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience. Base salary is just one component of our total rewards package at Rocket Lab. Employees may also receive company equity and access to a robust benefits package including: top tier medical HMO, PPO & a 100% company-sponsored medical HSA plan option, dental and vision coverage, 3 weeks paid vacation and 5 days sick leave per year, 11 paid holidays per year, flexible spending and dependent care savings accounts, paid parental leave, disability insurance, life insurance, and access to a 401(k) retirement plan with company match. Other perks include: Discounted employee stock purchase program, subsidized EV charging stations, onsite gym, food and drinks, and other discounts. Eligibility for benefits may vary based on employment status, please check with your recruiter for a comprehensive list of the benefits available for this role. Benefit programs are subject to change at the company's discretion. Base Pay Range (CA Only)$25-$35 USD WHAT TO EXPECT We're on a mission to unlock the potential of space to improve life on Earth, but that's not an easy task. It takes hard work, determination, relentless innovation, teamwork, grit, and an unwavering commitment to achieving what others often deem impossible. Our people out-think, out-work and out-pace. We pride ourselves on having each other's backs, checking our egos at the door, and rolling up our sleeves on all tasks big and small. We thrive under pressure, work to tight deadlines, and our focus is always on how we can deliver, rather than dwelling on the challenges that stand in the way. Important information: FOR CANDIDATES SEEKING TO WORK IN US OFFICES ONLY: To conform to U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), Rocket Lab Employees must be a U.S. citizen, lawful U.S. permanent resident (i.e., current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum, or be eligible to obtain the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable. Learn more about ITAR here. Rocket Lab provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment at Rocket Lab, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training. Applicants requiring a reasonable accommodation for the application/interview process for a job in the United States should contact Giulia Johnson at ***********************.This dedicated resource is intended solely to assist job seekers with disabilities whose disability prevents them from being able to apply/interview. Only messages left for this purpose will be considered. A response to your request may take up to two business days. FOR CANDIDATES SEEKING TO WORK IN NEW ZEALAND OFFICES ONLY: For security reasons background checks will be undertaken prior to any employment offers being made to an applicant. These checks will include nationality checks as it is a requirement of this position that you be eligible to access equipment and data regulated by the United States' International Traffic in Arms Regulations. Under these Regulations, you may be ineligible for this role if you do not hold citizenship of Australia, Japan, New Zealand, Switzerland, the European Union or a country that is part of NATO, or if you hold ineligible dual citizenship or nationality. For more information on these Regulations, click here ITAR Regulations.

About Castelion Castelion is bringing a new approach to defense development and production: one that focuses on short, iterative design cycles, rapid testing in development, and modern commercial manufacturing strategies for production at scale. We're designing, building, and testing next generation long range strike weapons systems to give America and its Allies a definitive edge and deter future conflicts. Avionics Manufacturing Specialist Castelion is looking for an Avionics Manufacturing Specialist, reporting to the Head of Avionics, to support the development of the systems that will be required for the design and build of long-range hypersonic strike vehicles. This will be a full-time, exempt position located in our El Segundo facility. As an Avionics Manufacturing Specialist, you will work closely with our engineering teams to execute highly technical electrical builds for our research vehicles, assist in advancing designs, and play a critical role in defining and maturing manufacturing, assembly and integration processes. Responsibilities Work with avionics engineering by rapidly iterating electronic components and cables Construct superior wire cables, perform PCB assembly rework, assemble, and test racks/systems, electro-mechanical units, engineering enclosures, and test equipment Create and record testing systems and cable diagrams according to engineer-selected testing gear Collaborate closely with engineering to transform concepts into reality Monitor one's own work progress against established standards and deliver all work on schedule Examine, interpret, and use drawings and regulated documentation and procedures Understand intricate cable harnesses, wiring diagrams, mechanical and layout drawings, and geometric dimensioning and tolerancing Verify flight hardware and thoroughly document outcomes Aid in developing manufacturing processes for initial production runs Contribute to projects aimed at increasing operational efficiency in the area Basic Qualifications 5+ years of avionics technician experience Experience reading PCBA schematics and execute rework Capability to rework 0201 SMD and BGA components in tight spaces Experience reading wiring harness drawings to build and troubleshoot laboratory and flight articles Knowledge of and adherence to industry standards, such as IPC-610 and IPC-620 Proficient with test equipment such as multimeters, oscilloscopes, and signal generators. Demonstrated direct or indirect leadership Preferred Skills and Experience Experience in a research and development environment Previous involvement in a high-speed production environment, handling flight hardware Prior involvement in a high-output environment, involving hands-on experience in constructing cables, electro-mechanical devices, or building prototypes Ability to acclimate to frequently changing assignments and a fast-paced working environment Excellent communication skills, both written and oral, along with effective teamwork abilities Superb focus and attention to detail, with remarkable work efficiency and accuracy Experience with soldering PCBAs, including soldering in tight spaces such as 0402 packages and high-density ICs, installing jumpers, and performing dead-bugging Expertise in manufacturing and repairing intricate testing systems Familiarity with Atlassian tools such as SVN, Confluence, and JIRA Basic comprehension of electronic principles and theory Skills in project management Additional Requirements Must be willing to work extended hours and/or weekends as needed Must be able to travel up to 30% of the time Leadership Qualities Bias to Action and Creative Problem Solving. Desire and experience questioning assumptions in ways that lead to break through ideas that are ultimately implemented. Successfully bring in applicable processes/concepts/materials from other industries to achieve efficiency gains. Ability to personally resolve minor issues in development without requiring significant support. High Commitment, High Initiative. A successful candidate will have a genuine passion for Castelion's mission and consistently look for ways to contribute to the company's technical goals and prevent hardware blockers. Ability to work in a fast paced, autonomously driven, and demanding atmosphere. Strong sense of accountability and integrity. Clear Communicator. Proactively communicates blockers. Trusted in previous roles to be voice of company with regulators, suppliers, gate keepers and customers. Capable of tactfully managing relationships with stakeholders to achieve company-desired outcomes without compromising relationships. Emails, IMs and verbal interactions are logical, drive clarity, and detailed enough to eliminate ambiguity. ITAR Requirements To conform to U.S. Government export regulations, applicant must be a (i) U.S. citizen or national, (ii) U.S. lawful, permanent resident (aka green card holder), (iii) Refugee under 8 U.S.C. § 1157, or (iv) Asylee under 8 U.S.C. § 1158, or be eligible to obtain the required authorizations from the U.S. Department of State. Employment with Castelion is governed on the basis of competence and qualifications and will not be influenced in any manner by race, color, religion, gender, national origin/ethnicity, veteran status, disability status, age, sexual orientation, gender identity, marital status, mental or physical disability or any other legally protected status. All employees are granted long-term stock incentives as part of their employment as Castelion. All employees receive access to comprehensive medical, vision, and dental insurance, and the company offers four weeks of paid time off per year.

ABBA Roller is seeking a Wheel Builder who is skilled and detail-oriented with a passion for precision and craftsmanship. The ideal candidate will be responsible for assembling and building rubber wheels, ensuring they meet quality standards and specifications. The Wheel Builder will work closely with various types of hubs to create durable and high-performance wheels. This role requires a strong understanding of wheel-building techniques, attention to detail, and the ability to work efficiently in a fast-paced environment. About ABBA: ABBA Roller specializes in high-performance urethane rollers and custom elastomer solutions for industrial and commercial applications. Our team supports customers across diverse industries with durable, precision-engineered products. We value hands-on problem solving, craftsmanship, and a workplace where expertise and teamwork drive every success. ESSENTIAL DUTIES AND RESPONSIBILITIES: Use precision measuring instruments such as calipers, micrometers, and gauges to ensure accuracy of dimensions. Maintains a safe, clean, organized work area. Additional responsibilities as assigned by management. Collaborate with other team members to ensure seamless integration with the overall product. Select, align and secure holding fixtures, cutting tools, attachments, accessories and materials on machines. Perform quality work checks to ensure the product meets quality standards, using inspection tools and devices. QUALIFICATIONS: 1-3 years of similar experience 1-3 years of experience with grinding and polish rubber machines, calipers, micrometers. DESIRED SKILLS: Detail-oriented with a focus on precision and quality. Ability to work efficiently in a fast-paced environment. Excellent problem-solving skills. Good communication and collaboration skills. Familiarity with safety guidelines and protocols. Crane Operator EDUCATION, EXPERIENCE, KNOWLEDGE: High School degree or GED equivalent Minimum of 2 years in similar field or with machine experience PHYSICAL REQUIREMENTS: Ability to lift and manipulate 40 lbs. Excellent close and distant vision. Ability to stand 8 hours plus per workday. Benefits: At ABBA Roller, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits, including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, and other developmental opportunities. We are committed to supporting the way you live and work. ABBA Roller is an Equal Opportunity Employer Veterans/Disabled - Affirmative Action Employer. This position requires using information subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. (Actual placement within the salary range is dependent on multiple factors, including but not limited to skills, education, experience and location)

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd Shift: 9:00 pm- 5:30 am At FUJIFILM Biosciences, we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Biosciences. Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Responsibilities: * Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. * Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. * Suggest changes in departmental procedures and processes (SOPs) as needed. * Performs and documents line clearance at the start of each formulation event. * Maintains all required logs and associated documentation. * Assures that all chemicals are stored and labeled properly. * Performs process scale checks on all required equipment including scales and balances. * Keeps work area, utensils, tanks, mills, and equipment clean and organized. * Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. * Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. * Understands and follows procedures to ensure that chemicals are handled properly. * Good understanding of metric system and its conversions. * Follows and actively participates in sustaining the 6S program in the area. * Other duties as requested by Lead or Supervisor. Required Skills/Education: * High School Diploma or equivalent. * Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. * 1-2 years of hands on experience * General education about chemicals and proper handling (college level science preferred). * Working knowledge of metric system. * Good understanding of current Good Manufacturing Practices (cGMPs). * Ability to speak, read, and write English. * Good oral and written communication skills. Salary and Benefits: * For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off * #LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*****************).

Electromechanical / Mechatronics Technician Department: Production Reports to: Production Manager Location: Full-Time Los Angeles, CA The Company LettrLabs is a rapidly growing startup bringing automated, handwritten direct mail to scale. Our mission is to modernize and automate a traditionally manual industry, enabling businesses of all sizes to deliver authentic, personalized mail efficiently and reliably. We operate in a fast-paced, production-driven environment where continuous improvement, ownership, and execution matter. You At LettrLabs, we look for self-driven individuals who take pride in their work, operate with integrity, and understand how to balance quality, speed, and accountability. You enjoy solving complex electromechanical problems, working hands-on with equipment, and collaborating closely with engineering and production teams to keep systems running at peak performance. Job Summary The Electromechanical / Mechatronics Technician is responsible for the planning, maintenance, diagnostics, troubleshooting, and repair of our custom robotics and all production equipment within the Production department. This role owns electromechanical diagnostics, preventative maintenance, reactive repairs, equipment upgrades, and the execution of engineering build instructions for new machines, retrofits, and process improvements. This position plays a critical role in ensuring equipment reliability, production uptime, and consistent quality output. The Electromechanical / Mechatronics Technician is also accountable for diagnosing root causes of mechanical, electrical, and process-related issues and working cross-functionally to implement long-term solutions. Essential Job FunctionsMaintenance, Diagnostics & Repair Maintain, troubleshoot, and repair all printing presses, slitters, and related production equipment, including custom machinery and robotics. Perform structured diagnostics to identify root causes of mechanical, electrical, and software failures. Respond to equipment downtime events with urgency, clear troubleshooting methodology, and effective resolution. Maintain accurate documentation of maintenance activities, repairs, failure modes, and corrective actions. Preventative Maintenance & Process Improvement Develop, execute, and continuously improve preventative maintenance schedules in coordination with the Production Team. Identify recurring issues and implement corrective actions to improve uptime, reliability, and Overall Equipment Effectiveness (OEE). Recommend equipment modifications, upgrades, and process improvements based on observed performance and failure patterns. Engineering Collaboration & Build Execution Execute machine builds, upgrades, and retrofits by following engineering drawings, build instructions, wiring diagrams, and assembly documentation. Collaborate closely with Engineers to provide feedback on build feasibility, serviceability, and long-term maintainability. Assist with commissioning, testing, and validation of new equipment and process changes before full production rollout. Quality Ownership Own quality issues related to equipment performance and maintenance activities. Ensure machines operate within defined quality standards and production tolerances. Partner with QA and Production teams to resolve quality defects tied to mechanical or process issues. Training & Technical Leadership Train operators and technicians on proper equipment operation, basic troubleshooting, and early issue detection. Provide technical leadership during complex repairs and equipment interventions. Support the development of standardized maintenance and troubleshooting procedures. Vendor & Parts Management Identify and manage external vendors for electrical, pneumatic, hydraulic, and machining support as needed. Source parts and materials with a focus on reliability, lead time, and cost effectiveness. Maintain an organized inventory of critical spare parts to minimize downtime. Communication, Safety & Collaboration Communicate clearly with Production, Engineering, QA, and Leadership regarding equipment status, risks, and improvement opportunities. Uphold health, safety, and fire safety standards within the production environment. Contribute positively to a culture of ownership, accountability, and continuous improvement. QualificationsEducation & Experience 5+ years of hands-on maintenance experience with printing equipment, automation, or related industrial machinery with heavy focus on diagnostics (e.g. printing, automotive, etc) College degree or equivalent professional experience in mechanical, electrical, or industrial maintenance. Skills & Abilities Comfortable in fast-paced, ambiguous environments. Strong diagnostic and troubleshooting skills across mechanical, electrical, pneumatic, and software. Ability to read and execute from engineering drawings, schematics, wiring diagrams, and build instructions. Experience working in a production environment where uptime and quality are critical. Strong organizational and documentation skills. Comfortable using task management and communication tools (e.g., Asana, Trello, Slack, Microsoft Teams). Clear communicator able to work cross-functionally with Engineers, Operators, QA, and Leadership. Opportunities for Growth You will gain hands-on experience with advanced automation, proprietary machinery, and evolving production systems. As LettrLabs grows, this role has a clear path toward technical leadership and management, including ownership of future technician teams and direct involvement in new machine design, builds, and deployments. This job description is not intended to be all-inclusive. Employees may perform other related duties as needed to support the ongoing needs of the business. Actual base salary offered will be determined by: experience, skills, and work location. This range is meant to cover total compensation and benefits. We welcome you to apply even if your expectations are outside our listed range. LettrLabs USA$65,000-$85,000 USD Actual base salary offered will be determined by: experience, skills, and work location. This range is for base salary, our total compensation includes equity and benefits. We welcome you to apply even if your expectations are outside our listed range. LettrLabs is committed to creating a diverse environment and is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. LettrLabs is committed to providing reasonable accommodations for qualified individuals with disabilities in our job application procedures and throughout employment. If you need assistance or any accommodation, please let us know. LettrLabs does not accept unsolicited resumes from recruiters or employment agencies without a fully executed recruitment agreement in place. In the absence of such agreement, LettrLabs reserves the right to pursue and hire any candidates without an obligation to pay fees. Agencies are requested not to contact LettrLabs hiring managers or employees regarding recruiting services.

Manufacturing Technician / Engineering $25 - $35/hr Considering candidate with the following experience: Test/Automation/Mechanical Technician experience. IPC 610 - A - and/or IPC - A 620 Standards Experience with electrical and/or optical products and equipment. Contract to Hire, Conversion to permanent after 3 months. Benefits upon conversion! 3 week vacation 1st year 10 holidays 6 - ½ days off before the holiday 1 floating holiday Job Summary The Manufacturing Engineering Technician is responsible for providing support to the Process, Equipment and Automation Engineering teams. This role will help develop and optimize processes, create manufacturing documentation, assemble prototypes and equipment as well as aid in troubleshooting efforts for the engineering teams. Duties & Responsibilities Build, document, test, and repair product, fixtures, and/or equipment by following technical documentation. Maintain instruments and manufacturing equipment ensuring proper monitoring, compliance with calibration, and proper control of asset location. Fabricate custom wire harnesses for automation equipment, including cable preparation and termination by following technical drawings. Wire/install custom automation equipment based on drawing/schematics. Fabricate pneumatic assemblies for automation equipment and prototyping based on drawing/schematics. Develop Manufacturing Assembly Procedures and Work Instructions. Execute process development experiments, accurately log data, and organize results. Coordinate logistics for engineering tools and equipment between different sites. Request quote with vendors and order fixtures or equipment for duplication purposes. Identify and purchase of the shelf components needed for equipment/fixtures. Perform installation and adjustment of fixtures and equipment by following proper procedures. Order, receive, organize and maintain tools and standard hardware for manufacturing. Perform failure analysis testing on production and returned sensors (electrical test, teardown, X-Ray). Initiate and close production and engineering builds, along with all related paperwork. Set-up, program and maintain surface mount technology equipment. Quote and order supplies and consumables for laboratories (cleaning, masking, PPE, etc…) Maintain and promote 5S standards. Train manufacturing associates. Provide input to engineering staff for process, fixture & equipment improvements. Assist in prototype builds, such as 3D prints, testing, etc. Perform other duties as required. Minimum Qualifications CRM systems/ Salesforce Electronic Test/Automation/Mechanical Technician experience. Experience with electrical and/or optical products and equipment. Experience with Industrial Controls panel wiring, cable routing, crimping, termination, labeling, component layout, sensors, robotics, PLC wiring. Ability to read and understand schematics and mechanical drawings. Working knowledge of lab equipment (oscilloscopes, Multimeters, etc.) Working knowledge of metrology equipment (comparator, calipers, dial indicators, micrometers, pin gages, etc.) and able to perform measurements. Capability following and providing feedback on engineering procedures. Strong organizational skills as well as attention to detail. Ability to work well in team environment. Carry out small projects independently or complete assigned tasks for major product development efforts. Knowledge in cGMP requirements and preferably ISO 9000 requirements. Good communication skills, both verbal and written, with the ability to effectively interface with Research and Development, Quality Assurance, and Production teams. Experience with fabrication equipment (Mill, Lathe, 3D printers, drill press, chop saw, etc.) Excellent computer skills - CAD, word processing, and spreadsheets. Must be able to lift and carry up to 50 pounds. Education High School Diploma or G.E.D, associate degree or Certification in Electronics/Automation/Mechanical assembly preferred. #MS-OCENG

Job DescriptionOverview Are you a highly skilled Electromechanical Technician with a passion for precision, problem-solving, and cutting-edge technology? We are seeking a dedicated individual to join our dynamic engineering team in Northridge, CA. This is an exceptional opportunity to apply your expertise in both mechanical and electrical systems, contributing directly to the performance and reliability of advanced machinery. Our company fosters an innovative, collaborative, and supportive environment where your contributions are recognized and your professional growth is a priority. We believe in empowering our team members with challenging projects, continuous learning opportunities, and a clear path for career advancement. You'll work alongside experienced engineers and technicians, tackling complex electromechanical challenges and becoming an integral part of our success in a high-demand industry. If you are driven by technical excellence and eager to make a tangible impact, this role offers the perfect platform to elevate your career. We pride ourselves on a culture that encourages ingenuity and critical thinking. Our Northridge facility is equipped with state-of-the-art tools and technology, providing an ideal setting for technicians who thrive on hands-on work and continuous improvement. This role isn't just about maintaining equipment; it's about optimizing performance, implementing innovative solutions, and contributing to the next generation of our products. You will have the chance to develop specialized skills in areas like robotics and automation, which are increasingly vital in today's engineering landscape. We are committed to investing in our employees' professional development, offering tuition reimbursement and access to industry-leading certifications to help you reach your full potential. Joining our team means becoming part of a forward-thinking organization that values its people. We understand that a fulfilling career involves both challenging work and a supportive community. Here, you'll find both, along with opportunities to expand your skill set, take on greater responsibilities, and advance within the company. This role is ideal for a proactive and detail-oriented technician who is ready to take their career to the next level in a thriving engineering environment. Duties & Responsibilities Perform complex electromechanical troubleshooting, diagnosing and resolving issues in integrated systems. Execute preventive maintenance programs for production machinery and test equipment to ensure optimal performance and longevity. Conduct precise mechanical assembly and integration of components, ensuring adherence to engineering specifications. Perform thorough electrical testing, including continuity, voltage, and current measurements, to verify system functionality. Interpret and utilize detailed blueprints, schematics, and technical drawings for assembly, repair, and modification tasks. Implement and maintain PLC programming for automated systems, including minor modifications and debugging. Provide essential robotics maintenance, covering calibration, repair, and programming adjustments for robotic arms and automated cells. Calibrate and adjust various types of equipment and instrumentation to meet stringent operational standards. Troubleshoot and repair hydraulic systems and pneumatic systems, ensuring reliable operation and safety. Document all maintenance activities, repairs, and calibrations accurately in maintenance logs and digital systems. Collaborate effectively with engineering teams on new equipment installation, system upgrades, and process improvement initiatives. Mentor junior technicians and contribute to a culture of shared knowledge and continuous learning. Salary & Benefits This full-time position offers a competitive annual salary ranging from $60,000 to $95,000, commensurate with your experience and qualifications. We believe in rewarding our team members generously for their expertise and dedication. Our comprehensive benefits package is designed to support your well-being and financial future, including: Robust health, dental, and vision insurance plans with low out-of-pocket costs. Generous overtime pay for hours worked beyond the standard workweek. 401(k) retirement plan with a competitive company matching contribution to help you build your savings. Paid time off (PTO) for vacation, sick leave, and personal days, ensuring a healthy work-life balance. Tuition reimbursement program to support your continuous education and skill development. Company-sponsored professional development courses and workshops. Life insurance, short-term, and long-term disability coverage. Employee assistance program (EAP) for personal and professional support. Opportunities for internal promotions and career advancement within a growing organization. A supportive and collaborative work environment focused on team success. Qualifications & Requirements High school diploma or equivalent. Minimum of 2 years of hands-on experience in electromechanical systems maintenance and repair. Demonstrated proficiency in electromechanical troubleshooting techniques. Strong foundational knowledge of electrical and mechanical principles. Ability to accurately read and interpret complex schematics, blueprints, and wiring diagrams. Experience with preventive maintenance protocols and best practices. Proficiency in using various hand tools, power tools, and diagnostic equipment. Solid understanding of safety protocols and procedures in an industrial setting, including Lockout/Tagout (LOTO). Preferred Qualifications Associate degree in Mechatronics, Electromechanical Technology, Industrial Automation, or a closely related field. Experience with PLC programming logic and basic ladder diagram interpretation. Familiarity with robotics maintenance and operation. Previous experience with equipment calibration in a manufacturing or engineering environment. OSHA Safety Certification. Skills Technical Skills Electromechanical troubleshooting PLC programming (basic) Robotics maintenance Equipment calibration Mechanical assembly Electrical testing and diagnostics Blueprint and schematic reading Preventive maintenance execution Hydraulic systems diagnostics and repair Pneumatic systems diagnostics and repair Soft Skills Problem-solving and analytical thinking Attention to detail and accuracy Effective communication (verbal and written) Team collaboration and interpersonal skills Adaptability and willingness to learn new technologies Strong work ethic and reliability Certifications Required Certifications: No specific certifications are strictly required for initial consideration, but demonstrated practical experience and knowledge are paramount. Preferred/Beneficial Certifications: * ISA Certified Control Systems Technician (CCST) - Demonstrates expertise in instrumentation, control systems, and troubleshooting. * ASQ Certified Calibration Technician - Validates skills in calibration principles and practices. * NIMS Mechatronics Certification - Confirms proficiency in integrated mechanical, electrical, and computer technologies. * OSHA Safety Certification - Highlights commitment to workplace safety and regulatory compliance. How Certifications Impact Candidacy: Possessing these certifications can significantly strengthen your application, showcasing your specialized knowledge, commitment to the field, and ability to meet industry standards. They indicate a proactive approach to professional development and a deeper understanding of complex systems, which can lead to accelerated career growth and increased responsibilities within our team. Ideal Candidate The ideal candidate for this Electromechanical Technician role is a highly motivated and detail-oriented individual with a strong mechanical aptitude and a solid understanding of electrical systems. They thrive in a fast-paced, hands-on environment and are eager to tackle complex technical challenges with a solution-oriented mindset. This person is a natural problem-solver, capable of working independently to diagnose issues and collaboratively with a team to implement effective repairs and improvements. They are committed to continuous learning, always seeking to expand their knowledge of new technologies and best practices in automation and robotics. A proactive approach to preventive maintenance, a dedication to safety, and excellent communication skills are essential. The perfect fit will align with our culture of innovation, precision, and teamwork, aspiring to grow their career in a leading-edge engineering organization. About the Role This full-time Electromechanical Technician position is based at our state-of-the-art facility in Northridge, CA. This is an on-site role, emphasizing hands-on work with our advanced machinery and integrated systems. You will be an integral part of our engineering and operations team, reporting directly to the Maintenance Manager. The team structure encourages collaboration, with opportunities to work alongside various engineering disciplines. We provide all necessary tools, diagnostic equipment, and safety gear to ensure you can perform your duties efficiently and safely. There are no regular travel requirements for this position. The growth trajectory for this role includes opportunities to specialize in areas like automation, robotics, or control systems, with potential for advancement into lead technician or supervisory roles based on performance and demonstrated leadership. How to Apply To apply for this exciting opportunity, please submit your application and resume through our online portal. Please include your resume and a cover letter detailing your relevant experience, technical skills, and why you are interested in this position. Applications will be reviewed on a rolling basis until the position is filled. We are an equal opportunity employer and value diversity at our organization. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other characteristic protected by applicable law. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. If you require an accommodation during the application process, please contact the hiring team. We actively encourage applications from individuals of all backgrounds, experiences, abilities, and perspectives. Veterans, individuals with disabilities, and members of underrepresented groups are strongly encouraged to apply.

What we're building Our vision is to electrify all waterborne vessels, and we're starting with electric water sport boats. Gas boats dominate today's marine industry not because of great product offerings but because of a lack of better alternatives. Boaters have grown accustomed to vehicles that feel stuck in the 1980s: unreliable, expensive, loud, noxious, and a nightmare to own and operate. They're also awful for the water and air they reside in. By contrast, electric boats are superior in nearly every way: not only are they far more reliable and less costly to operate, but they're also quieter, quicker, and cleaner, with no fumes or pollutants. However, they've been held back by both the technology and the talent to make them truly competitive with gas alternatives. That's Arc's opportunity. Using modern, aerospace- and automotive-inspired techniques, we're building our hulls, batteries, cooling systems, firmware, and software together to deliver the next generation of watercraft. Who we're looking for We're looking for someone excited by our vision, eager for a challenge, and ready to learn on the job. We pride ourselves on transparency and operate in a lean, high-trust environment where everyone takes ownership of their domain. You will be a full-time member of our Production team, working from our manufacturing facility in Torrance, CA. This role will focus on assembling, testing, and troubleshooting electromechanical systems, while also contributing to process improvements and various production projects. As a startup, we move fast. You'll need to be adaptable, but the following responsibilities and qualifications will remain relatively constant. Core responsibilities Assembling and disassembling electric powertrain systems and instrumentation Advising on the design of assemblies, components, and testing Setting up and utilizing test equipment, including digital multimeters, HIPOT machines, and power supplies Performing component assembly inspections and complete documentation Contributing to improving workshop standards, protocols, and processes Basic qualifications Proficiency using mechanical and electric hand tools Experience in building and troubleshooting electromechanical systems, including electric motors, batteries, sensors, electronics, controls, and pneumatics Ability to read and interpret engineering drawings, work instructions, and product data sheets Ability to: Stand for extended periods (6-10 hours per day) Lift up to 50 lbs. Work extended hours as needed to meet production demands Bonus qualifications High school diploma or GED Prior experience in a fast-paced manufacturing setting Experience with welding, composites, or interiors At Arc, we encourage diversity and consider all qualified applicants equally for employment, regardless of background, identity, or status. You're always welcome to reach out even if you don't meet many of these qualifications. Passion and aptitude make up for a lot. Our values We value these five things above all else: Ownership over both your work and the company's success Empathy for colleagues and for customers Humility in problem solving and collaboration Pragmatism for navigating ambiguity quickly and sensibly Inclusion of different backgrounds, opinions, cultures, etc. We work in an intense but rewarding environment, so it's important that our values align. We'd be happy to elaborate during the interview process. What we offer Talented teammates that challenge you to be better Access and often input to a wide range of business activities An hourly wage between $31.50 - 42.00 A meaningful equity stake An opportunity to have an outsized impact on industry-defining vehicles The ability to drive positive environmental change through your work Nearly free health insurance (we cover 99%) and a 401k Generous parental leave Daily lunches at our office in LA, plenty of snacks, lots of swag, and more Boat rides! Hope to hear from you soon! The crew at Arc

Job Title: Electromechanical TechnicianJob Description We are seeking an electromechanical technician skilled in using hand and power tools to assemble both robust metal structures and delicate electronics assemblies. The ideal candidate has experience with a wide range of tools and is motivated to enhance their skills to produce high-quality outputs. You should maintain a tidy and well-organized workspace, keep detailed records of your work, and recognize that doing a job well the first time is more efficient in the long run. Responsibilities + Assemble robust metal structures such as tube frames and sheet metal. + Assemble delicate electronics assemblies, including PCBs and small-gauge wiring. + Perform soldering for assembly and repair of wires, through-hole, and surface mount components. + Conduct mechanical assembly using hand and power tools, including drilling, tapping, deburring, filing, and sanding. + Perform cable assembly, including stripping, crimping, testing, and strain relieving. + Apply good ESD practices while assembling sensitive electronic components into a system. + Engage in purchasing, inventory planning, and management. + Troubleshoot hardware issues and test equipment functionality. Essential Skills + Proficiency in soldering for assembly and repair of wires, through-hole, and surface mount components. + Experience in mechanical assembly with hand and power tools, including drilling, tapping, deburring, filing, and sanding. + Ability to perform cable assembly, including stripping, crimping, testing, and strain relieving. + Knowledge of good ESD practices for assembling sensitive electronic components. Additional Skills & Qualifications + Experience with purchasing and inventory management. + Strong troubleshooting skills for hardware and test equipment. Work Environment Work involves using various hand and power tools in a structured environment. The role requires adherence to ESD practices and organizational skills to maintain a tidy workspace. Employees are encouraged to improve and utilize their skills for efficient and high-quality outputs. Job Type & Location This is a Permanent position based out of Los Angeles, CA. Pay and Benefits The pay range for this position is $65000.00 - $85000.00/yr. The company provides Medical dental vision The company has unlimited PTO Workplace Type This is a hybrid position in Los Angeles,CA. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

We are hiring a Powder Formulation Technician. The Powder Formulation Technician will be responsible for formulation of powdered media. 3rd shift - 9PM - 5:30AM At FUJIFILM Biosciences, we turn curiosity into breakthroughs that advance the field of life sciences. By offering a comprehensive portfolio of products and services in cell culture media, discovery research reagents, recombinant growth factors and proteins, fine chemicals, and critical assay materials, we partner with the brightest minds in biotech and pharma to tackle the world's biggest health challenges. Imagine being part of a team that enables life-changing discoveries like new vaccines, therapies, and advancements in regenerative medicine. Our culture fosters curiosity, collaboration, and innovation, and we pride ourselves on delivering unparalleled quality and service to our partners. If you're ready to make an impact, your future belongs with us at FUJIFILM Biosciences. Our headquarters in Santa Ana, California, is surrounded by world-class schools, lush parks, and scenic beaches like Laguna and Huntington, making it an ideal place to live, work, and explore. With additional campuses across the US, Europe, China, and Japan, we offer opportunities to make a difference worldwide. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of "giving our world more smiles." Visit: *************************************************** Job Description Responsibilities: * Formulates Powder media formulas per manufacturing protocols utilizing various weighing equipment such as scales and balance. * Uses Mettler-Toledo IND780 terminal system in conjunction with the SAP ERP system to ensure correct raw materials assigned in the batch record are weighed at the specified quantity. * Suggest changes in departmental procedures and processes (SOPs) as needed. * Performs and documents line clearance at the start of each formulation event. * Maintains all required logs and associated documentation. * Assures that all chemicals are stored and labeled properly. * Performs process scale checks on all required equipment including scales and balances. * Keeps work area, utensils, tanks, mills, and equipment clean and organized. * Ensures that supplies needed such as weigh boats, gloves, lab coats, etc. are well stocked in their designated areas. Orders supplies or informs Lead/Supervisor if supplies need to be ordered. * Follows all safety procedures and works in a safe manner including wearing all required personal protective equipment. * Understands and follows procedures to ensure that chemicals are handled properly. * Good understanding of metric system and its conversions. * Follows and actively participates in sustaining the 6S program in the area. * Other duties as requested by Lead or Supervisor. Required Skills/Education: * High School Diploma or equivalent. * Good work history. * Background in medical devices, diagnostics, food/vitamin processing, or pharmaceuticals. * 1-2 years of hands on experience * General education about chemicals and proper handling (college level science preferred). * Working knowledge of metric system. * Good understanding of current Good Manufacturing Practices (cGMPs). * Ability to speak, read, and write English. * Good oral and written communication skills. Salary and Benefits: * For California, the base salary range for this position is $19.65 - $25.51 per hour. Compensation for the successful candidate will depend on various factors (e.g., qualifications, education, prior experience, location, etc.). * Medical, Dental, Vision * Life Insurance * 401k * Paid Time Off * #LI-onsite EEO Information Fujifilm is committed to providing equal opportunities in hiring, promotion and advancement, compensation, benefits, and training regardless of nationality, age, gender, sexual orientation or gender identity, race, ethnicity, religion, political creed, ideology, national, or social origin, disability, veteran status, etc. ADA Information If you require reasonable accommodation in completing this application, interviewing, completing any pre-employment testing, or otherwise participating in the employee selection process, please direct your inquiries to our HR Department (*****************).

Job Title: Electromechanical TechnicianJob Description We are seeking an electromechanical technician skilled in using hand and power tools to assemble both robust metal structures and delicate electronics assemblies. The ideal candidate has experience with a wide range of tools and is motivated to enhance their skills to produce high-quality outputs. You should maintain a tidy and well-organized workspace, keep detailed records of your work, and recognize that doing a job well the first time is more efficient in the long run. Responsibilities * Assemble robust metal structures such as tube frames and sheet metal. * Assemble delicate electronics assemblies, including PCBs and small-gauge wiring. * Perform soldering for assembly and repair of wires, through-hole, and surface mount components. * Conduct mechanical assembly using hand and power tools, including drilling, tapping, deburring, filing, and sanding. * Perform cable assembly, including stripping, crimping, testing, and strain relieving. * Apply good ESD practices while assembling sensitive electronic components into a system. * Engage in purchasing, inventory planning, and management. * Troubleshoot hardware issues and test equipment functionality. Essential Skills * Proficiency in soldering for assembly and repair of wires, through-hole, and surface mount components. * Experience in mechanical assembly with hand and power tools, including drilling, tapping, deburring, filing, and sanding. * Ability to perform cable assembly, including stripping, crimping, testing, and strain relieving. * Knowledge of good ESD practices for assembling sensitive electronic components. Additional Skills & Qualifications * Experience with purchasing and inventory management. * Strong troubleshooting skills for hardware and test equipment. Work Environment Work involves using various hand and power tools in a structured environment. The role requires adherence to ESD practices and organizational skills to maintain a tidy workspace. Employees are encouraged to improve and utilize their skills for efficient and high-quality outputs. Job Type & Location This is a Permanent position based out of Los Angeles, CA. Pay and Benefits The pay range for this position is $65000.00 - $85000.00/yr. The company provides Medical dental vision The company has unlimited PTO Workplace Type This is a hybrid position in Los Angeles,CA. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Description: Electromechanical Technician IThe Electromechanical Technician I is responsible for performing entry-level technical tasks involving the installation, maintenance, troubleshooting, and repair of electromechanical systems and equipment. This role supports the efficient operation of machinery by ensuring all components function correctly and meet quality standards.Key Responsibilities:Assemble, install, and maintain electromechanical equipment and systems under supervision.Perform routine inspections to identify potential issues in machinery and systems.Troubleshoot and repair basic mechanical, electrical, and electronic issues.Assist in testing system performance using diagnostic tools and equipment.Read and interpret technical diagrams, schematics, and manuals.Ensure compliance with safety standards and protocols during maintenance and repair tasks.Maintain accurate records of work performed, including repairs, parts used, and maintenance schedules.Communicate effectively with team members and supervisors to ensure efficient operations.Qualifications:High school diploma or equivalent; additional technical certification or vocational training is a plus .Basic understanding of mechanical, electrical, and electronic systems. Ability to use hand tools, power tools, and diagnostic equipment safely and effectively. Strong problem-solving skills and attention to detail. Willingness to learn and adapt to new systems and technologies. Ability to follow instructions and work collaboratively within a team. Physical Requirements: Ability to lift up to 50 pounds and perform physical tasks such as bending, standing, and climbing. Comfortable working in environments with noise, heat, or moving machinery. Preferred Qualifications: Previous experience in a technical or maintenance role is advantageous but not required. Familiarity with industrial machinery or automated machinery