Mechanic jobs in Colts Neck, NJ - 859 jobs

Academy Bus is seeking a full-time Diesel Mechanic Foreman for our new Perth Amboy, NJ location. $2500 Sign On Bonus. Every Friday is Pay Day. Pay rate is $35.00-$44.00 per hour. Pay based on candidate experience level. Shift is 5:00am-6:00pm. Responsibilities: Train and supervise mechanics and maintenance staff Repair, troubleshooting and diagnosis of modern motor coach bus engines and transmissions Reconditioning, preventative and routine maintenance Inspections and road tests Warranty and repair documentation Diagnosis, inspection, installation, disassembly and cleaning of components such as: Diesel engines, electronic systems/motors/controls, drive line components, tires, bearings, brake systems, seals, radiators, water pumps, coolant hoses, alternators, regulators, steering components, oil/air filters, door assemblies, controls, belts, pneumatic valves, cables, and linkages, radiators, heating, air conditioning, alternators, generators, voltage regulators, suspensions, seating, steering, and glass. Respond to road calls General welding/fabrication Requirements: 7+ years of diesel engine maintenance Must have supervisory experience Minimum personal tool value $5000 Proven ability to use hands tools, power tools, hydraulic jacks, pullers, VOA instruments, reamers, vacuum and compression pumps, welding equipment, and testing instruments Proficient in the use of diagnostic devices such as: DDEC readers, ATEC readers, SmarTire, schematics, AIC (Freon) recovery and charging equipment Valid driver's license Basic computer skills Ability to pass pre-employment background check and drug screen CDL License with Passenger and Airbrake endorsement is a plus but not required, willingness to obtain a CDL License is also desirable Health Insurance and Benefits Offered Include: Medical, Dental, Vision, Prescription, and Life insurance Supplemental coverages 401K plan Paid time off Paid holidays Academy is EEO. Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

If you are unable to complete this application due to a disability, contact this employer to ask for an accommodation or an alternative application process. Full Time Lexus of Brookyln, Brooklyn, NY, US 4 days ago Requisition ID: 2645 Salary Range: $18.00 To $30.00 Hourly Job Description BRAM Auto Group is one of the largest family-owned businesses in the Tri-State area serving customers in New York and New Jersey for over 50 years. BRAM is a premier automotive management group - we own and operate 13 innovative Dealership Locations representing Lexus, Honda, Toyota, Cadillac, INEOS Grenadier, Genesis and Hyundai Brands. BRAM Auto Group has built a strong company reputation as a workplace that values innovation, upholds superior service, and rewards hard work and success. We offer a competitive total compensation package that includes Medical, Dental, Vision, Life, 401K, Paid Vacation & Holidays, and more! We are actively recruiting for an experienced and skilled Automotive Technician who is looking to elevate their career! This opening is for our Lexus of Brooklyn Dealership. The Union benefits include comprehensive Medical, Vision, Dental and Life Insurance plans. Requirements: Diagnoses cause of malfunctions and perform work specified on the repair order with efficiency and in accordance with dealership. The Automotive Technician is responsible for vehicle maintenance and proper lubrication of a car's suspension system and other moving parts. Examines the vehicle to determine if additional safety or service work is required and notifies service advisor. Responsible for documenting all work performed. Road-tests vehicles when required. Test-drive vehicles, and test components and systems, using diagnostic tools and special service equipment. Ensures cleanliness of all customers vehicles. Keeps shop area neat, clean, and be able to account for all dealership-owned tools. Understands and follows federal, state and local regulations, such as those governing the disposal of hazardous wastes. Complies with factory and state requirements for technical certifications. Attends factory-sponsored training classes as required. MUST HAVE NEW YORK STATE INSPECTION LICENSE. Here's what to expect from us: Unionized Benefits! Weekends off! The opportunity to earn top pay, with an incredible productivity bonus - paid weekly. To work in a clean, modern, temperature controlled environment. Factory sponsored training programs. A Team you can count on and professionals to grow with. Job Type: Full-time Schedule: 8 hour shift Ability to commute/relocate: Brooklyn, NY 11220: Reliably commute (Required) #J-18808-Ljbffr

Does this position interest you? You should apply - even if you don't match every single requirement! We're known as an auto glass company. That's the focus of what we do. But beyond the glass, we're so much more. We'll help you build a fulfilling career and encourageyou to have a life. Let us be the best place you'll ever work. A Brief Overview A Technician Trainee will be trained and educated to become a proficient auto glass technician. Upon completing our training program, the trainee will receive the Safelite SafeTech certification and will possess fundamental skills necessary for performing unsupervised glass repair, replacement and recalibrations. The trainee is expected to embody the Safelite Spirit with a can-do attitude, caring heart and service mindset while striving to bring unexpected happiness to customers by completing jobs timely and with the highest quality standards. What you will do • Be paid to learn and apprentice the Safelite way, through hands-on and classroom training, including: • Observing and assisting in installing and repairing auto glass • Recalibrating automotive safety systems, including trouble-shooting and completing diagnostic testing • Providing additional services & products • Study and pass testing to become a Safelite-certified Technician showing proficiency in installations, embracing a positive attitude and following taught techniques. • Safely operate company and customer vehicles, company-issued tools and chemicals utilized throughout the workday. • Performs other duties as assigned • Complies with all policies and standards What you'll get: • Competitive weekly pay starting at $22.25/hour, increasing to $26.50/hour after training and certification. • Earn $5/set of wiper blades when added for customer safety. • A benefits package valued at more than $10k*. Includes 401(k) plan with company matching, medical plans, paid time off, holidays & volunteer days. • Program to buy additional PTO or sell unused time up to 16 hours. • Up to $5,250 annually in tuition reimbursement. • Paid training and all the tools and resources you'll need to be successful. • View all our health, wealth, and life offerings at ************************* Education Qualifications • High School Diploma GED/Equivalent Preferred • Valid state-issued driver's license any other license(s) (as required by federal, state and local laws) to operate a company vehicle. Required Experience Qualifications • Must be 18 years of age or older Required Skills and Abilities • Ability to regularly lift and carry up to 35 pounds and occasionally lift and carry up to 50 pounds. • Ability to stand for extended periods, work in tight spaces, bend and twist body • Ability to use a variety of hand tools and power tools safely and effectively • Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via in-cab vehicle safety camera / video surveillance technology • Maintains professionalism and passion for providing outstanding customer service and exceeding customer expectations • Ability to safely work outside (in a wide variety of weather conditions and extreme temperatures) for extended periods • Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting” • Ability to work scheduled days, with flexibility on start and end times to accommodate customer's needs • Proficiency in using computerized diagnostic tools to complete recalibrations and trouble-shoot issues • Problem-solving and ability to trouble-shoot issues, independently and collaboratively • Ability to read, write and interpret the English language and technical directions • Ability to communicate orally (via phone) and written (via computer or other electronic means) • Ability to maintain a professional appearance, adhering to Company dress code and PPE policies • Willingness and ability to maintain stable performance under professional or personal pressure and/or opposition (e.g., time pressure and productivity measures). #LI-RS1 This in no way states or implies that these are the only duties to be performed by an employee occupying this position. Employees may be required to perform other related duties as assigned to ensure workload coverage. This job description does NOT constitute an employment agreement between the employer and employee and is subject to change by the employer as the organizational needs and requirements of the job change. This position description is not all inclusive for every aspect of this role. Reasonable accommodations will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not, and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability. Other qualifications may be required to ensure employment eligibility in accordance with local laws, regulations and with Safelite Group, Inc. policies and practices. -- Internal Associates: Already a member of the Safelite team? Apply through your Workday account by searching "Find Open Jobs". Diversity: Safelite welcomes everyone. We value our diverse workforce and suppliers, and we're proud to be an equal opportunity employer. Learn more at Careers Benefit amounts are estimates only. Actual values will depend on benefit elections during enrollment. This position description is not all inclusive for every aspect of this role. Reasonable accommodation will be made for individuals covered by ADA, ADEA, FMLA and other laws and regulations in accordance with their requirements. Physical and mental demands are not and should not be construed to be job qualification standards, but are illustrated to help the employer, employee and/or applicant identify tasks where reasonable accommodations may need to be made when an otherwise qualified person is unable to perform the job's essential duties because of an ADA disability.

Bridgestone Retail Operations (BSRO) is part of Bridgestone Americas and employs over 22,000 teammates in North America. BSRO operates more than 2,200 company-owned stores, including Firestone Complete Auto Care, Tires Plus and Wheel Works locations. With locations across North America and more than $4.5 billion in tire and auto service sales, Bridgestone Retail Operations is the right place to build a career. Whatever role you fill, when you represent the Bridgestone name, you are a valued teammate, and part of our larger mission to Serve Society with Superior Quality. We start by offering each teammate more than just competitive pay. We provide formal training, performance incentives, paid vacation and holidays, competitive healthcare packages for full-time and part-time employees, and a 401k plan to help build towards your future. We believe people can only provide superior service and quality to others when they are allowed to bring their whole self to work and know they are supported. We believe in championing all perspectives, individuals and teams because we understand the importance of seeing the world and our business through many different lenses. We are building a team as diverse as the world we serve. So, show us what you are made of. Show us the smart stuff, the tough stuff, the bold, beautiful and brave stuff. Because who you are is what we need. **Job Category** Retail **Position Summary** The Automotive Technician plays a pivotal role within our automotive service team. As a vital member, you learn and develop foundational skills in diagnosing, repairing, and maintaining vehicles. Under the guidance of experienced technicians, this role involves hands-on learning to address various automotive systems and services. Automotive Technicians participate in routine inspections, contribute to vehicle assessments, and assist in repair procedures. Additionally, Automotive Technicians may interact with customers to explain repair procedures, answer inquiries, and provide exceptional service. Overall, this role demands a combination of mechanical aptitude, attention to detail, and a commitment to delivering high-quality workmanship in a fast-paced environment. This role offers a unique opportunity for individuals to build a solid foundation in automotive repair while contributing to the overall success of our team. Pay Range: $19.55 - $29.33 Our technicians enjoy a performance-based compensation model known as flat-rate pay. This system rewards our skilled professionals with a predetermined amount for each eligible task, fostering a culture of efficiency and swift task accomplishment, ensuring you're fairly rewarded for your expertise and dedication. These rates reflect average productivity by region. **Responsibilities** + Change oil and perform other scheduled maintenance services. + Perform inspections of steering, suspension, and brake systems. + Install batteries and check electrical systems. + Perform tire maintenance. + Install parts. + Road test vehicles. + Obtain or maintain A.S.E. certifications in at least one of A1 - A8 within first two years of employment (Tests and registrations fees are paid for by company pass or fail. Technicians receive bonus for each test passed) **Minimum Qualifications** + Ability to learn basic mechanical tasks. + Must have a valid automobile driver's license at all times and be able to drive customer and company vehicles. + Basic understanding of general automotive maintenance & tire repair services including: + Oil changes + Basic inspections + Repairing tires + Reading, writing, and math skills. **Preferred Qualifications** + 2 years of automotive repair experience, completion of Vocational-Technical School program in a related field or demonstrated skills via third party certificates/assessment. + A.S.E certification or equivalent external qualifications or training certifications. **OUR CREW KNOWS** **BENEFITS** + Medical, Dental and Vision - Starting day 1 for all our teammates + Paid vacation and holidays + On-the-job training and company-funded ASE certifications + Flexible work schedule + 401(k) match + On demand pay (daily pay) program available **OUR VALUES GIVE BACK TO** **YOU** + Professional Development: No matter where you're at in your career, we've got the resources to help you level up. + Community Involvement: We pride ourselves on working with our local communities and giving back where we can. + Integrity & Teamwork: Part of what makes our teams different is our drive to do things right, always, together. **At Bridgestone, you are Free to Be** We believe people can only provide superior service and quality to others when they bring their whole self to work. We believe in championing all perspectives, individuals and teams because we understand the importance of seeing the world and our business through many different lenses. We are building a team as diverse as the world we serve. So, show us what you are made of, because who you are is what we need. **What we offer** At Bridgestone, what really matters is to foster co-creation opportunities and empowering you to be creative and curious to make mobility safer, more efficient, and more sustainable for future generations. Whatever role you fill, when you represent Bridgestone, you are a valued teammate, and part of our larger mission to "Serve Society with Superior Quality", for that, we offer you more than just a competitive compensation; we will provide you: + A supportive and engaging onboarding experience to ensure a smooth transition into our team. + The opportunity to develop and grow, through training and regular mentorship. + Corporate Social Responsibility activities. + A truly global, dynamic and challenging work environment. + Agility and work/life effectiveness and your long-term well-being. + A diverse and inclusive team. _Bridgestone is proud to be an Equal Employment Opportunity employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state or local law._ **Employment Eligibility** If hired, a Form I-9 Employment Eligibility Verification must be completed at the start of employment. Temporary work authorization or the need for sponsorship may disqualify you from employment.

Freelance handyman Independent online sorted gigs for, plumbers, electricians and motion editing, auto mechanic services, lawn and landscaping services. Need a smart phone or lap top or desk top computer to connect and perform work. We provide a platform and get you a gig online, you contact prospective client, agree on a price for described work, you issue an invoice on the platform to the client, once paid by client you will receive a success notice from the platform and you commence work for the client. The platform keeps an agreed percentage fee from payment and release the client payment you within 24 - 72 hours of the completed services and case closed.

Jersey Elevator is part of American Elevator Group (AEG), the largest independent elevator service company in North America, consisting of a collection of well-established elevator service companies operating throughout the United States. Backed by Arcline Investment Management, AEG has a significant footprint in the elevator industry and is rapidly growing. As an Elevator Mechanic you will be responsible for the construction of elevators and other lifting equipment. The Elevator Mechanic will be responsible for ensuring the safety and reliability of the equipment, as well as troubleshooting and resolving any mechanical issues that may arise. This involves skilled mechanical work and intricate control circuits. Responsibilities: * Responsible for inspecting elevators of all types and makes, determining the cause of faulty operation, making repairs and adjustments, and troubleshooting problems. * Ability to diagnose deficiency of equipment and make recommendations for major changes or requirements. * Install, maintain, and repair elevators, escalators, and other lifting equipment * Knowledge and ability to analyze and repair failures, especially in emergency situations. * Troubleshoot and diagnose mechanical issues. * Repair or replace defective parts. * Conduct regular inspections to ensure equipment is functioning properly. * Respond to emergency repair calls in a timely manner. * Maintain accurate records of all repairs and maintenance performed. * Provide excellent customer service to building owners and occupants. * Performs other duties as assigned.

Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. Job Description: Seeking a reliable Mechanic Journeyman to join our outstanding fleet maintenance team. The Automotive Technician will be responsible for maintaining a diverse range of equipment, including delivery vehicles, heavy-duty on-road tractors, and trailers from various manufacturers. These vehicles' propulsion systems include diesel and gasoline. Automotive Technicians must be skilled in troubleshooting and maintaining various systems, including hydraulic brakes, air brakes, electrical systems, and engine controls. Automotive Technicians must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Automotive Technicians must possess the required hand tools required to perform the applicable job assignment. Responsibilities and Duties Meets D.O.T requirements required by job assignment Bends, stoops, squats, kneels, crouches, crawls, climbs ladders and stairs, stands, walks, and turns/pivots frequently throughout duration of workday Sits infrequently, as required, throughout duration of workday Exercises simple hand grasping, power hand grasping, fine hand manipulation, and reaching from foot level to above shoulder level as necessary to complete assigned tasks Operates standard and manual transmission Operates power and pneumatic tools Requirements Must have an active driver's license issued by the state Must be willing to work 2nd or 3rd shifts, including Monday through Friday, Sunday through Thursday as well as Tuesday through Saturday schedules, depending on the location's need. Must possess the required hand tools required to perform the applicable job assignment. Must have experience with trailers and tractors. Knowledge and Skills Current documented automotive mechanical experience Experience using diagnostic equipment, scan tools and personal computer Possesses full complement of personal hand tools Class A/B or A Commercial Driver's License (CDL) - Preferred Dependable with ability to report to work on a regular and timely basis and complete scheduled workday on a consistent basis Available to work varying shifts, additional hours and/or overtime depending on service needs Wears personal protective equipment as required Works in an environment with variable temperatures and humidity (climatic conditions), exposure to cleaning materials, petroleum products, dust, dirt, and noise, outside inclement weather, etc. Works cooperatively in a diverse work environment Communicates effectively through sight, hearing, and/or otherwise, to perform assigned tasks and maintain proper job safety conditions Our compensation reflects the cost of labor across several US geographic markets. The starting pay for this position is $39.25 per hour. For union-represented postings, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. Hired applicants are eligible for weekly pay, extensive training, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, $0 healthcare premium, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, discounted employee stock purchase program. Employee Type: Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Basic Qualifications: Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer.

As our Maintenance Mechanic you are are to maintain and repair plant equipment to ensure safe and reliable operations while maximizing Overall Equipment Effectiveness (OEE). Solving challenges is the very foundation of who we are. After all, in the beginning, our founder, sea captain Robert Fergusson, didn't particularly care about paint. When he founded our company in 1921, he just wanted to keep his ship intact and stumbled upon a valuable solution. Today, that discovery is Rust-Oleum Corporation. The same passion that drove the Captain to spend his next few years creating the world's first rust-preventative paint still drives us today. When we see a problem, we work diligently until we've perfected a solution, which has led to some of the most cutting edge, durable and innovative products in the industry. Our creative and talented team of over 2000 people across every corner of the world, help us remain the global leader in protective paints and coatings for both home and industry. Here's what you can expect every day: Repair and maintain machinery and equipment including: pumps, motors, filling and packaging equipment, conveyors, palletizers, piping, valves, tanks, agitators, drives, gearboxes, and utilities. Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices. Perform inspections and preventive maintenance to ensure compliance with safety and regulatory requirements as well as to ensure equipment reliability. Work with filling line operators to efficiently change over line equipment for different label, container, and packaging sizes. Improve OEE (Overall Equipment Effectiveness) on the filling lines by Pareto analysis of OEE data and implementation of Lean Manufacturing tools to reduce downtime. Maintain all operating equipment in satisfactory condition. Schedule needed repairs to have minimum interference with operations. Troubleshoot/repair equipment in a timely and efficient manner. Comply with company safety rules and procedures. Complete daily and shift clean up tasks. Communicate results/ concerns/ issues with supervisor and co-workers. Ensure shift to shift hand-off is complete. Support and complete small capital projects. Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class. Required Experience: 3+ years of maintenance experience in manufacturing environment; preferably in chemical/paint manufacturing High School Diploma or equivalent Must have expertise in packaging equipment, plumbing, and pipefitting, with skills in electrical work and instrument calibration considered a definite plus Demonstrated ability to diagnose and troubleshoot complex packaging and material-handling equipment is required Ability to do basic math. Accurately enter and retrieve computer data. Ability to operate machinery Ability to solve problems in a team environment. Active participation in our Continuous Improvement Process. Ability to consistently lift 50 pounds. Willing to work overtime as required.

Alternate Concepts, Inc. (ACI) and Herzog Transit Services, Inc. (HTSI), collectively the ACI/Herzog Joint Venture, along with our key subcontractors are seeking applicants for the Hudson Bergen Light Rail operation located in Hudson County, New Jersey. ACI was founded in 1989 with their corporate office located in Boston, MA and Herzog founded in 1969 with corporate offices located in St. Joseph, MO and Fort Worth, TX. Combined our companies provide FRA/FTA compliant transportation, equipment maintenance, dispatching, right-of-way maintenance, facility maintenance and dispatching services for 20 distinct client properties. In addition to the Joint Venture being the upcoming operator/maintainer of the Hudson Bergen Light Rail, we currently jointly operate the Tren Urbano heavy rail service in San Juan, Puerto Rico and the CTDOT's Hartford intercity service in Connecticut. ACI/Herzog Joint Venture, along with our key subcontractors are currently seeking an Elevator Mechanic to join our team. The pay range for this postion is $34.00 - $45.00 per hour. Duties and Responsibilities: *This is a non-exhaustive overview of the job duties for this position. Responding to mechanical failures and system malfunctions. Installing and testing electrical systems. Servicing and maintaining machine parts. Repairing or replacing system parts. Oiling and greasing moving parts. Carrying out safety checks. Maintaining stock and ordering supplies. Maintaining a clean working area. Other duties as assigned. Qualifications: High school diploma or GED. Relevant mechanical certification. Previous work experience as an elevator mechanic. Advanced knowledge of elevator systems, mechanical walkways, and escalators. Ability to read and interpret blueprints. Ability to troubleshoot mechanical malfunctions. Physically fit and able to lift heavy objects. Ability to travel and work after hours when required. Ability to work independently. Pre-Employment Requirements: Subject to pre-employment background check and motor vehicle report review. Subject to pre-employment physical, medical evaluation, and drug screen due to the safety sensitive nature of this position.

The ALAD/Mechanics Helper II will support the Naval Air program located at NAS Lakehurst, NJ. The Prototype and Manufacturing Department provides critical hardware to the fleet. We overhaul arresting engines and launch valves and are the sole source of supply for the cables used for aircraft arrestment (i.e., purchase cables and cross deck pendants), we manufacture hardware in response to fleet emergencies, and we manufacture a wide range of support equipment and test this equipment appropriately. We are the sole source of supply and last source of supply for critical hardware that is essential to Navy Fleet operations. ESSENTIAL REQUIREMENTS * Must have GED or High School Diploma. * Candidates must have the ability to lift 50 lbs. (more is preferred). * Candidates must have the ability to obtain forklift license (existing license and experience preferred). KEY DUTIES AND RESPONSIBILITIES Essential duties and responsibilities include the following. Other duties may be assigned. Mechanics Helpers perform a wide range of tasks associated with the fabrication, assembly, and overhaul of equipment. ALAD Mechanics Helpers perform tasks primarily on Aircraft Launch and Arresting Devices (ALAD). These tasks may include, but are not limited to: * Disassembly and assembly of equipment. * Repair and regular maintenance of arresting engines. * Must be capable of reading and interpreting military drawings. * May be required to work with hazardous materials (HAZMAT) and are required to know how to read and interpret material data safety sheets. * The ability to properly fit and use of safety and protective equipment is required. * Work in a dirty environment requiring the use of coveralls and suits (e.g. Tyvek) may be required. * Preference to candidates with experience in mechanics, engine maintenance, brake systems, and/or aircraft engine repair. * Installs, maintains, and repairs electrical systems. * Executes wiring plans and installs fixtures and equipment. * Testing and inspecting electrical work like wiring and lighting to ensure safe installation and compliance with regulatory codes. * Planning and designing layouts of fixtures, wiring pathways and other electrical elements. * Identifying and mitigating safety hazards, code violations and other electrical issues. Ensures safety compliance. Responsible for aiding in own self-development by being available and receptive to all training made available by the company. Plans daily activities within the guidelines of company policy, job description and supervisor's instruction in such a way as to maximize personal output. EDUCATION / EXPERIENCE Must have GED or High School Diploma. JOB SPECIFIC KNOWLEDGE / SKILLS / ABILITIES Ability to read and write English and follow shop instructions, whether written, oral or electronic form. Ability to do the work of the position without more than normal supervision. Ability to interpret instructions, specification, etc. (includes blueprint reading). Ability To use and maintain tools and equipment. Knowledge of equipment assembly, installation, repair, etc.. Knowledge of technical practices (theoretical, precise, artistic). Trouble shooting skills. Knowledge in the use of measuring instruments. Ability to work in tiring and uncomfortable positions for extended periods of time. Ability to frequently lift and carry items weighing up to 40 pounds. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. Work performed in an office, mechanic shop or in the field. May be required to lift objects up to 50 pounds. Frequently required to grasp, grip or apply pressure to an object with the arms, hands, fingers and palm, while holding an object in the hand. Frequently required to lift, raise or lower objects in a vertical direction, particularly heavy or bulky objects. Moving objects backward, forward, in or out in a horizontal direction, particularly heavy or bulky objects. Pulling, exerting a steady backward, downward, upward or outward force against an object - jerking, plucking, wrenching, stretching, towing, drawing, dragging or tugging objects in a sustained motion. Pushing, pressing against something with steady forward, downward, upward or outward force - shoving, pushing, compressing, squeezing, mashing, packing, pressing, jamming, compacting, or squashing objects in a sustained motion. Uses hand and power tools. The ability to see and distinguish colors, to visually distinguish shapes and patterns, to accurately sense distances (depth perception), to accurately see objects and detect motion at wide angles (peripheral vision). Frequently uses the lower extremities and back muscles and moving on foot, particularly for long distances. May have exposure to indoor/outdoor adverse weather conditions. Frequent exposure to noise - workers must wear protective hearing equipment or frequently shout in order to be heard above the ambient noise level. Exposure to pollutants or allergens which can adversely affect the skin and/or the respiratory system such as gases, smoke, odors, mists, fumes, dust, chemicals, oils or solvents. Exposure to hazardous working conditions including moving machinery, electricity and/or working in high places. The job requires the use of protective equipment such as hard hats, respirators, aprons, gloves, special clothing, safety shoes and safety glasses. EOE including Disability/Vet The estimated pay range for this role is $30 to $40, with the final offer contingent on location, skillset, and experience. Your application submission will be considered for all potential employment opportunities with Chickasaw Nation Industries (CNI). CNI offers a comprehensive benefits package that includes: * Medical * Dental * Vision * 401(k) * STD/LTD/AD&D * Employee Assistance Program (EAP) * Paid Time Off (PTO) * Training and Development Opportunities

The ALAD/Mechanics Helper II will support the Naval Air program located at NAS Lakehurst, NJ. The Prototype and Manufacturing Department provides critical hardware to the fleet. We overhaul arresting engines and launch valves and are the sole source of supply for the cables used for aircraft arrestment (i.e., purchase cables and cross deck pendants), we manufacture hardware in response to fleet emergencies, and we manufacture a wide range of support equipment and test this equipment appropriately. We are the sole source of supply and last source of supply for critical hardware that is essential to Navy Fleet operations. ESSENTIAL REQUIREMENTS Must have GED or High School Diploma. Candidates must have the ability to lift 50 lbs. (more is preferred). Candidates must have the ability to obtain forklift license (existing license and experience preferred). KEY DUTIES AND RESPONSIBILITIES Essential duties and responsibilities include the following. Other duties may be assigned. Mechanics Helpers perform a wide range of tasks associated with the fabrication, assembly, and overhaul of equipment. ALAD Mechanics Helpers perform tasks primarily on Aircraft Launch and Arresting Devices (ALAD). These tasks may include, but are not limited to: Disassembly and assembly of equipment. Repair and regular maintenance of arresting engines. Must be capable of reading and interpreting military drawings. May be required to work with hazardous materials (HAZMAT) and are required to know how to read and interpret material data safety sheets. The ability to properly fit and use of safety and protective equipment is required. Work in a dirty environment requiring the use of coveralls and suits (e.g. Tyvek) may be required. Preference to candidates with experience in mechanics, engine maintenance, brake systems, and/or aircraft engine repair. Installs, maintains, and repairs electrical systems. Executes wiring plans and installs fixtures and equipment. Testing and inspecting electrical work like wiring and lighting to ensure safe installation and compliance with regulatory codes. Planning and designing layouts of fixtures, wiring pathways and other electrical elements. Identifying and mitigating safety hazards, code violations and other electrical issues. Ensures safety compliance. Responsible for aiding in own self-development by being available and receptive to all training made available by the company. Plans daily activities within the guidelines of company policy, job description and supervisor's instruction in such a way as to maximize personal output. EDUCATION / EXPERIENCE Must have GED or High School Diploma. JOB SPECIFIC KNOWLEDGE / SKILLS / ABILITIES Ability to read and write English and follow shop instructions, whether written, oral or electronic form. Ability to do the work of the position without more than normal supervision. Ability to interpret instructions, specification, etc. (includes blueprint reading). Ability To use and maintain tools and equipment. Knowledge of equipment assembly, installation, repair, etc.. Knowledge of technical practices (theoretical, precise, artistic). Trouble shooting skills. Knowledge in the use of measuring instruments. Ability to work in tiring and uncomfortable positions for extended periods of time. Ability to frequently lift and carry items weighing up to 40 pounds. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. Work performed in an office, mechanic shop or in the field. May be required to lift objects up to 50 pounds. Frequently required to grasp, grip or apply pressure to an object with the arms, hands, fingers and palm, while holding an object in the hand. Frequently required to lift, raise or lower objects in a vertical direction, particularly heavy or bulky objects. Moving objects backward, forward, in or out in a horizontal direction, particularly heavy or bulky objects. Pulling, exerting a steady backward, downward, upward or outward force against an object - jerking, plucking, wrenching, stretching, towing, drawing, dragging or tugging objects in a sustained motion. Pushing, pressing against something with steady forward, downward, upward or outward force - shoving, pushing, compressing, squeezing, mashing, packing, pressing, jamming, compacting, or squashing objects in a sustained motion. Uses hand and power tools. The ability to see and distinguish colors, to visually distinguish shapes and patterns, to accurately sense distances (depth perception), to accurately see objects and detect motion at wide angles (peripheral vision). Frequently uses the lower extremities and back muscles and moving on foot, particularly for long distances. May have exposure to indoor/outdoor adverse weather conditions. Frequent exposure to noise - workers must wear protective hearing equipment or frequently shout in order to be heard above the ambient noise level. Exposure to pollutants or allergens which can adversely affect the skin and/or the respiratory system such as gases, smoke, odors, mists, fumes, dust, chemicals, oils or solvents. Exposure to hazardous working conditions including moving machinery, electricity and/or working in high places. The job requires the use of protective equipment such as hard hats, respirators, aprons, gloves, special clothing, safety shoes and safety glasses. EOE including Disability/Vet The estimated pay range for this role is $30 to $40, with the final offer contingent on location, skillset, and experience. Your application submission will be considered for all potential employment opportunities with Chickasaw Nation Industries (CNI). CNI offers a comprehensive benefits package that includes: Medical Dental Vision 401(k) STD/LTD/AD&D Employee Assistance Program (EAP) Paid Time Off (PTO) Training and Development Opportunities

Job Title: JFK Station Mechanic Department: Maintenance Reports To: Outstation Line Maintenance Manager ESSENTIAL DUTIES AND RESPONSIBILITIES: Duties and responsibilities include, but are not limited to: Conduct Terminating Service maintenance checks per the KA General Maintenance Manual at least every 50 flight hours. Accomplish all required servicing of the aircraft including wheel and brake replacement, engine oil servicing, replacing burnt out light bulbs, wiping down struts, etc. Troubleshoot and repair defects discovered and complete all return to service paperwork completely and on a timely basis. Forward copies of repair information to Maintenance Control as work is completed. Perform other duties as directed by the GMM, Maintenance Control or his supervisor. QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed above are representative of the knowledge, skill, and/or ability required. Also required is an A&P license and previous 747 experience is desirable. Tools required as well. EDUCATION and/or EXPERIENCE High school graduate; some college and/or technical school desirable. LANGUAGE SKILLS Ability to read, write and understand spoken and written English. Ability to write routine reports and correspondence. Ability to give verbal and written direction to assigned staff. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to reach with hands and arms, stand; walk; talk or hear; and use hands and fingers to handle, feel or operate objects, tools, or controls. The employee is occasionally required to sit; climb or balance; stoop, kneel, crouch or crawl. The employee must occasionally lift and/or move more than 50 pounds, to eye level. Lift 10 pounds with each arm over your head Twist, turn with normal strength force Climb numerous flights of stairs Work on ladders, lifts and in some case high elevations Work in a squatted position Work in all weather conditions WORK ENVIRONMENT The work environment characteristics describe here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed primarily in a construction, maintenance setting. The noise level in the work environment is usually loud.

MECHANICS NEEDED - $1,000 signing bonus for forklift mechanics certified on competitive equipment! We are not seeking forklift operators; this role is geared towards those with experience repairing forklifts or other heavy equipment. Candidates need minimum 1-year experience. We Service NY, NJ & Eastern PA Founded in 1977, C&C Lift Truck , Inc. has continuously grown over the last 42 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and ready to expand our team! We are currently looking for all experience level Forklift Mechanics to service our customers in the NY, NJ and Eastern, PA areas. Our mechanics will respond to customer service calls on location and accurately diagnose and repair customer equipment. C&C Offers: Union Pension Plan Medical, Dental, Vision benefits available Vacation Time Retirement Plan Opportunities Overtime Opportunities Competitive wages Supplemental Pay (bonus pay, commission pay, signing bonus) Referral bonus program Compensation: $18 - $32 / hour Primary Responsibilities: Job will require IC and Electric truck repairs Complete scheduled PM and repair assignments within the time frame allotted Track van inventory to meet PM schedule Perform routine forklift maintenance Use diagnostic tools to test forklift components Perform quality inspections Skills Required: The ability to work in all types of weather conditions The ability to stand and walk for long periods of time Employee must be able to push, pull, carry, grasp, reach and crouch when needed for the job Employee must be able to communicate effectively with management, customers, and other employees Job will require the employee to interpret documents, comprehend basic instructions (written or verbal), apply abstract principles to a wide range of complex tasks Employee must be able to analyze information and write a diagnosis on work orders The ability to decipher different colors Must be able to work individually and as a team Qualifications: Prefer 1 or more years' experience as a heavy equipment mechanic or related mechanic jobs Valid Driver's license with a good driving record Strong mechanical aptitude and troubleshooting skills Deadline and detail-oriented Valid Driver's license with a good driving record Ability to lift 50 lbs. Willingness to learn Ability to thrive in a fast-paced environment Schedule: Monday - Friday, 7:30 a.m to 4:00 p.m. shop hours All candidates will be required to submit to drug screening and motor vehicle background checks. We are an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Job Description Start Time: 6:30 AM End Time: 3:00 PM Mechanic In Training - Water/Wastewater Treatment Facility At , we challenge what is currently accepted, so we can shape innovative and lasting solutions for tomorrow. Through the delivery of our operations and maintenance services, youll make it simpler and more seamless for our municipal clients to operate safely and efficiently, empowering communities to focus on what matters most to them people. As a Mechanic-in-Training, youll join a collaborative team ensuring that our clients can deliver their services uninterrupted. Based at the North Hudson Sewerage Authority in Hoboken, New Jersey, youll have the opportunity to perform a variety of tasks in the preventive and corrective maintenance on water/wastewater treatment plants and related facilities equipment on an assigned shift. Youll contribute to the success of our program with efficient preventive maintenance and effective solutions to challenges that may arise in municipal facilities. Youll perform preventive and corrective maintenance on buildings, structures, grounds, machinery and equipment; lubricate equipment and check for malfunctions; replace packing in pumps or valves; replace bearings in motors, pumps, and other equipment; tune engines, set valve clearance, clean, and adjust regulators; examine equipment failures to identify cause and to prevent recurrences; and install and sets up new equipment. Youll also clean and paint interior and exterior equipment and buildings; lean out pipes and perform other plumbing and pipe fitting tasks as required; use gas and/or arc welding equipment to heat, cut, braze, or weld; perform duties of painter in their absence; assist in keeping maintenance records; and perform other duties as required. Most importantly, youlltake actionto ensure the safety, health and well-being of you and your team. Here\'s What You\'ll Need: A valid drivers license with no major infractions Ideally, Youll Also Have: Experience in the maintenance of wastewater treatment plants and related equipment, or similar maintenance experience A valid Certified Maintenance & Reliability Technician (CMRT) certification or ability to obtain within 3 years of date of hire Experience in the use of Computerized Maintenance Management Systems (CMMS) Forklift experience Experience in serving municipal utility client Safe work practices Working Conditions & Physical Requirements: Safety is a core value at . We are committed to providing a safe and healthy workplace for all employees. This position will spend a substantial amount of time performing safety sensitive labor or services. Responsibilities: Comments/Special Instructions Candidate will work Monday-Friday 630-3PM (1/2 hr lunch and 15 min AM & PM break); once trained, will be required to be on the on-call rotating schedule and work overtime when required.

Your next adventure starts here! At Lucky Strike Entertainment, great times and exciting opportunities go hand in hand. Join us as a Mechanic and become part of a vibrant atmosphere filled with dynamic experiences and endless possibilities. Start making your own luck today! Applicants must be at least 18 years of age to qualify for a position. WHAT OUR MECHANICS DO Our Experienced Mechanics make sure our lanes, pinspotters/pinsetters, and other building equipment are all in tip-top shape by performing preventative maintenance and making emergency repairs when necessary. If you've got a strong mechanical aptitude and a history of exceptional performance, you'll thrive as a member of our team. A MECHANIC'S DAY-TO-DAY: Abide by and maintain all safety procedures as required by Lucky Strike Entertainment and OSHA. You are responsible for keeping the center equipment in full working order. Fully understand how to operate all bowling equipment in the center Adhere to all outlined preventative maintenance programs and monitor and perform daily center maintenance as instructed. Take charge and ensure the shop and machine area is clean and organized. Assisting the Senior Mechanic with the training of new Mechanics. WHAT IT TAKES: At least 1 year of Mechanical experience High School Diploma with a strong emphasis on algebra, geometry, and applied mathematics (Optional) Excellent communication skills Ability to train new mechanics Availability to work nights, weekends, holidays, and extended workdays Proven team player PERKS (MORE REASONS YOU'LL LOVE YOUR JOB) Free Bowling! $1 Arcade Play 20% off Events 50% off Food & Beverages WORK ENVIRONMENT/ PHYSICAL DEMANDS: Typical entertainment environment where you will walk, bend and stand for periods of time, and may lift objects with some assistance. Job Type: Part-time Shift: Evening shift Night shift Weekly day range: Weekend availability Work Location: One location Who We Are Lucky Strike Entertainment, formerly Bowlero Corp, is one of the world's premier location-based entertainment platforms. With over 360 locations across North America, Lucky Strike Entertainment provides experiential offerings in bowling, amusements, water parks, and family entertainment centers. The company also owns the Professional Bowlers Association, the major league of bowling and a growing media property that boasts millions of fans around the globe. For more information on Lucky Strike Entertainment, please visit ir.luckystrikeent.com. The pay range for this position is $18.00 to $22.00 / hour Lucky Strike Entertainment offers performance-based incentives and a competitive total rewards package which includes healthcare coverage and a broad range of other benefits. Incentives and/or benefit packages may vary depending on the position. More details regarding benefits are available here: ************************************

Fraza & Vitan Equipment is looking for an experienced Forklift Technician to repair heavy equipment. You'll service, diagnose, and maintain forklifts and material handling equipment-no two days are the same. Why you'll love it here: Pay range $21-$33 an hour, based on experience and qualifications Weekly pay Company vehicle provided No weekends Medical, dental, vision, & pension What you'll do: Diagnose and repair mechanical, electrical, and hydraulic issues Perform preventative maintenance to keep equipment in top shape Travel to customer sites-variety of work every day Ensure equipment is safe and meets standards Keep accurate records of work performed What you'll need: 2+ years' experience in forklift or heavy equipment repair (electric, propane, diesel) Strong troubleshooting skills and safety focus Valid driver's license Get to know us: Fraza and Vitan Equipment is a full-service material handling business with over 300 skilled employees across Michigan and the East Coast. Our team uses innovative equipment and processes to push your business forward and increase efficiency. We're always on the lookout for talented individuals to join our team and grow their careers in a challenging but positive environment. Take the next step in your career-apply today!

A leading Auto Group is actively recruiting for an experienced Automotive Technician at their Brooklyn dealership. The role requires diagnosing malfunctions, performing vehicle maintenance, and complying with safety regulations. Union benefits include comprehensive health insurance, weekends off, and opportunities for training and productivity bonuses. Candidates must hold a New York State Inspection License, exhibit strong diagnostic skills, and be dedicated to delivering exceptional service in a clean work environment. #J-18808-Ljbffr

Jersey Elevator is part of American Elevator Group (AEG), the largest independent elevator service company in North America, consisting of a collection of well-established elevator service companies operating throughout the United States. Backed by Arcline Investment Management, AEG has a significant footprint in the elevator industry and is rapidly growing. Responsibilities: * Performs elevator new installation and modernization work. Tests and adjusts general operating and safety features of elevators such as speed, acceleration, leveling, braking, emergency stop, and alarm bell * Installs/replace electronic control panels, switches, relays, signal devices, electric motors, generators and related equipment * Inspects, adjusts, maintains, and repairs hoist motors and machinery, governors, door mechanisms, cables, hydraulic buffers, pumps, brakes, rails, guides and related equipment * Read and interpret blueprints to determine the layout of system components and to select the equipment needed for installation or repair * Assemble elevator cars, installing each car's platform, walls, and doors * Connect electrical wiring to control panels and electric motors * Test newly installed equipment to ensure it meets required specifications per elevator code * Troubleshoot malfunctions in brakes, motors, switches, and control systems * Dismantle elevator components in order to gain access to remove and replace defective parts, using hoists, ladders, and hand/power tools * Repair and/or replace faulty components in order to return elevator to fully operational status * Ability to travel with weekly overnight stays. Minimum 2 nights.

Job Description MECHANICS NEEDED - $1,000 signing bonus for forklift mechanics certified on competitive equipment! We are not seeking forklift operators; this role is geared towards those with experience repairing forklifts or other heavy equipment. Candidates need minimum 1-year experience. We Service NY, NJ & Eastern PA Founded in 1977, C&C Lift Truck , Inc. has continuously grown over the last 42 years to become one of the leading forklift dealerships in the Tri-State area, and one of the leading Komatsu dealers in the country. We are family owned and operated, and ready to expand our team! We are currently looking for all experience level Forklift Mechanics to service our customers in the NY, NJ and Eastern, PA areas. Our mechanics will respond to customer service calls on location and accurately diagnose and repair customer equipment. C&C Offers: Union Pension Plan Medical, Dental, Vision benefits available Vacation Time Retirement Plan Opportunities Overtime Opportunities Competitive wages Supplemental Pay (bonus pay, commission pay, signing bonus) Referral bonus program Compensation: $18 - $32 / hour Primary Responsibilities: Job will require IC and Electric truck repairs Complete scheduled PM and repair assignments within the time frame allotted Track van inventory to meet PM schedule Perform routine forklift maintenance Use diagnostic tools to test forklift components Perform quality inspections Skills Required: The ability to work in all types of weather conditions The ability to stand and walk for long periods of time Employee must be able to push, pull, carry, grasp, reach and crouch when needed for the job Employee must be able to communicate effectively with management, customers, and other employees Job will require the employee to interpret documents, comprehend basic instructions (written or verbal), apply abstract principles to a wide range of complex tasks Employee must be able to analyze information and write a diagnosis on work orders The ability to decipher different colors Must be able to work individually and as a team Qualifications: Prefer 1 or more years' experience as a heavy equipment mechanic or related mechanic jobs Valid Driver's license with a good driving record Strong mechanical aptitude and troubleshooting skills Deadline and detail-oriented Valid Driver's license with a good driving record Ability to lift 50 lbs. Willingness to learn Ability to thrive in a fast-paced environment Schedule: Monday - Friday, 7:30 a.m to 4:00 p.m. shop hours All candidates will be required to submit to drug screening and motor vehicle background checks. We are an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.