Mechanic jobs in Haslett, MI - 275 jobs

How to Apply A cover letter is required for consideration for this position and should be attached as the first page of your resume. The cover letter should address your specific interest in the position and outline skills and experience that directly relate to this position. Job Summary Class A License To perform, in accordance with all applicable state and other safety codes, work in the fabrication, installation, modification, modernization, maintenance and repair of electrical and electronic circuitry, electronic, mechanical and hydraulic equipment, systems and controls, fixtures and wiring for elevators, escalators, dumbwaiters, wheelchair lifts, dock and scissors lifts, vertical reciprocating conveyers, dock levelers and other special elevating devices. Class B License To perform, in accordance with all applicable state and other safety codes, work in the fabrication, maintenance and repair of electrical and electronic circuitry, electronic, mechanical and hydraulic equipment, systems and controls, fixtures and wiring for elevators, escalators, dumbwaiters, wheelchair lifts, dock and scissors lifts, vertical reciprocating conveyers, dock levelers and other special elevating devices. Assist in work requiring a State of Michigan Permit to Alter Elevating Devices in the installation, modification and modernization of the aforementioned equipment and systems. Responsibilities* Class A License To perform, in accordance with all applicable state and other safety codes, work in the fabrication, installation, modification, modernization, maintenance and repair of electrical and electronic circuitry, electronic, mechanical and hydraulic equipment, systems and controls, fixtures and wiring for elevators, escalators, dumbwaiters, wheelchair lifts, dock and scissors lifts, vertical reciprocating conveyers, dock levelers and other special elevating devices. Fabricate, repair and install control and distribution apparatus, including, switches, relays, resistance tubes, rectifiers, electronic control boards, transformers and power supplies. Fabricate, modify, maintain, repair, calibrate and adjust complex electronic circuitry and electronic mechanical equipment, including controllers, selectors and dispatching equipment, power operated door mechanisms and car safety mechanisms. Connect wiring to lighting fixtures and elevator power equipment using hand tools. Inspect, dismantle and repair motors and generators, replacing bearings, bushings, carbon brushes, springs and brush holders. Inspect and adjust or replace contacts, shunts, springs, armatures and coils in relays, selectors and controllers. Inspect, dismantle and repair hoisting machines, including bearings, gears, shafts, brake shoes and brake mechanisms. Analyze malfunctions of electrical and electronic equipment using test equipment, such as voltmeter, ammeter, oscilloscope, ohmmeter, computers and any other diagnostic equipment used for troubleshooting. Diagnose malfunctions in electronic circuitry and relay systems and perform or coordinate the repair of electronic circuitry and control systems, including the replacement of electronic relay components. Inspect, test and adjust electronic elevator boards. Select materials, methods, equipment and tools to be used in the fabrication, installation, maintenance, and repair of electronic circuitry and equipment of elevating systems. Inspect, disassemble, repair and reassemble hydraulic pumps, valves and traction elevating machines. Replace cables on all elevating devices. Repair or replace elevator wiring in the machine space, hoist way, car or pit. Perform demolition activities including removal of devices from service. Perform safety tests in accordance with state regulations and perform fire service checks. Perform the process of stoning, grinding, and undercutting the commutators on motors and generators. Clean, lubricate, repair, and replace motors, gears, motor generators, governors, sheaves, rails, bearings, truss assemblies, packings and other components. Inspect, repair, reset or replace contacts on control panels, doors, switches, disconnects and other devices. Inspect, maintain or replace doors, tracks, cab interiors, flooring, car sills, door re-opening devices, outer door opening mechanisms, gibs, escalator steps, handrail drive chains, guides, balustrades, skirts, decking, comb teeth, rollers and handrails. Perform work requiring a State of Michigan Permit to Alter Elevating Devices. Inspect, clean and repair governors, butters and exhaust fans on car tops. Inspect, repair or replace car, machine room and hoist way lighting. Connect and disconnect motors, gears, motor generators and other devices. Inspect, maintain and install indicator panels and components such as buttons, Braille tags, cover plates, lights, emergency phones and smoke detectors. Read and interpret blueprints, sketches, specifications and wiring diagrams. Repair hydraulic leaks, dispose of hydraulic oil and clean up spills in accordance with EHS and other safety regulations. Hoist and rig material for installation or repair. Paint equipment including in machine rooms, pits, hoist ways and car tops. Prepare records and service reports of materials and time expended. Clean assigned area of work to include all equipment, machine spaces, top of elevator cars, pits and hoist ways. Class B License To perform, in accordance with all applicable state and other safety codes, work in the fabrication, maintenance and repair of electrical and electronic circuitry, electronic, mechanical and hydraulic equipment, systems and controls, fixtures and wiring for elevators, escalators, dumbwaiters, wheelchair lifts, dock and scissors lifts, vertical reciprocating conveyers, dock levelers and other special elevating devices. Assist in work requiring a State of Michigan Permit to Alter Elevating Devices in the installation, modification and modernization of the aforementioned equipment and systems. Repair and install control and distribution apparatus, including, switches, relays, resistance tubes, rectifiers, electronic control boards, transformers and power supplies. Maintain, repair, calibrate and adjust complex electronic circuitry and electronic mechanical equipment, including controllers, selectors and dispatching equipment, power operated door mechanisms and car safety mechanisms. Connect wiring to lighting fixtures and elevator power equipment using hand tools. Inspect, dismantle and repair motors and generators, replacing bearings, bushings, carbon brushes, springs and brush holders. Inspect and adjust or replace contacts, shunts, springs, armatures and coils in relays, selectors and controllers. Inspect, dismantle and repair hoisting machines, including bearings, gears, shafts, brake shoes and brake mechanisms. Analyze malfunctions of electrical and electronic equipment using test equipment, such as voltmeter, ammeter, oscilloscope, ohmmeter, computers and any other diagnostic equipment used for troubleshooting. Diagnose malfunctions in electronic circuitry and relay systems and perform or coordinate the repair of electronic circuitry and control systems, including the replacement of electronic relay components. Inspect, test and adjust electronic elevator boards. Select materials, methods, equipment and tools to be used in the maintenance, and repair of electronic circuitry and equipment of elevating systems. Inspect, disassemble, repair and reassemble hydraulic pumps, valves and traction elevating machines where a permit is not required for work. Replace cables on all elevating devices. Repair or replace elevator wiring in the machine space, hoist way, car or pit. Perform safety tests in accordance with state regulations and perform fire service checks. Perform the process of stoning, grinding, and undercutting the commutators on motors and generators. Clean, lubricate, repair, and replace motors, gears, motor generators, governors, sheaves, rails, bearings, truss assemblies, packings and other components. Assist Class A licensed elevator mechanics in work requiring a State of Michigan Permit to Alter Elevating Devices. Assist Class A licensed elevator mechanics with work in the fabrication, modification installation, modernization of all elevating devices when work requires a State of Michigan Permit to Alter Elevating Devices. Inspect, repair, reset or replace contacts on control panels, doors, switches, disconnects and other devices. Inspect, maintain, repair or replace doors, tracks, car sills, door re-opening devices, outer door opening mechanisms, gibs, escalator steps, handrail drive chains, guides, balustrades, skirts, decking, comb teeth, rollers and handrails. Inspect and maintain cab interiors and flooring. Inspect, clean and repair governors, buffers and exhaust fans on car tops. Inspect, repair or replace car, machine room and hoist way lighting. Connect and disconnect motors, gears, motor generators and other devices. Inspect, maintain and repair indicator panels and components such as buttons, Braille tags, cover plates, lights, emergency phones and smoke detectors. Read and interpret blueprints, sketches, specifications and wiring diagrams. Repair hydraulic leaks, dispose of hydraulic oil and clean up spills in accordance with EHS and other safety regulations. Hoist and rig material for installation or repair. Paint equipment including in machine rooms, pits, hoist ways and car tops. Prepare records and service reports of materials and time expended. Clean assigned area of work to include all equipment, machine spaces, top of elevator cars, pits and hoist ways. Required Qualifications* Class A License Graduation from high school and specialized training in electrical and electronic repair work is necessary. Completion of an apprenticeship program in elevator maintenance and repair work or equivalent is desirable. Considerable knowledge of the tools, equipment, methods and materials involved in mechanical, electrical and electronic repair work is necessary. Considerable experience in the installation, maintenance, modernization, modification and repair of electrical and mechanical equipment and devices or elevator systems is necessary. Must possess and maintain a valid journeypersons Class A license issued by the Michigan Department of Licensing and Regulatory Affairs Bureau of Construction Codes/ Licensing & Compliance Division is necessary. Ability to read and interpret blueprints, sketches, specifications and wiring diagrams. Must be able to perform work effectively as a member of a team as well as independently. Good communication skills in order to communicate effectively with co-workers, supervisors, customers, and others. Class B License Graduation from high school and specialized training in electrical and electronic repair work is necessary. Completion of an apprenticeship program in elevator maintenance and repair work or equivalent is desirable. Considerable knowledge of the tools, equipment, methods and materials involved in mechanical, electrical and electronic repair work is necessary. Considerable experience in the maintenance and repair of electrical and mechanical equipment and devices or elevator systems is necessary. Possession of a valid journeypersons Class B license issued by the Michigan Department of Licensing and Regulatory Affairs Bureau of Construction Codes/ Licensing & Compliance Division is necessary. Ability to read and interpret blueprints, sketches, specifications and wiring diagrams, and function in a teamwork environment is necessary. Licensure & Certification Class A License Possession of a valid journeypersons Class A license issued by the Michigan Department of Consumer & Industry Services Bureau of Construction Codes & Fire Safety Elevator Safety Division is necessary. Class B License Possession of a valid journeypersons Class B license issued by the Michigan Department of Consumer & Industry Services Bureau of Construction Codes & Fire Safety Elevator Safety Division is necessary. Work Schedule Monday - Friday, 7:00am to 3:30pm The candidate for this position may be asked to work overtime and may be asked to respond to emergency calls during after hours. Underfill Statement This position may be underfilled at a lower classification as Elevator Mechanic - Class B License depending on the qualifications of the selected candidate. Starting salary for the underfill classification is $119,745.60 - after three months in position $120,785.60 Additional Information Facilities and Operations is a positive organization dedicated to the principles of being respectful, collaborative, solutions-based, and proactive. Union Affiliation This position is covered under the collective bargaining agreement between the U-M and the U-M Skilled Trades Union, Inc., which contains and settles all matters with respect to wages, benefits, hours and other terms and conditions of employment. Background Screening The University of Michigan conducts background checks on all job candidates upon acceptance of a contingent offer and may use a third party administrator to conduct background checks. Background checks will be performed in compliance with the Fair Credit Reporting Act. U-M EEO Statement The University of Michigan is an equal employment opportunity employer. Job Detail Job Opening ID 272636 Working Title ELEVATOR MECHANIC - Class A License (Underfill as Class B License) Job Title ELEVATOR MECHANIC A LICENSE Work Location Ann Arbor Campus Ann Arbor, MI Modes of Work Onsite Full/Part Time Full-Time Regular/Temporary Regular FLSA Status Nonexempt Organizational Group Maintenance Services Department Central Campus E Region Posting Begin/End Date 1/08/2026 - 1/22/2026 Salary $131,248.00 - $132,288.00 Career Interest Facilities Operations Trades (Trades Union) Apply Now

Job Summary - Essential Functions: Inspection, diagnosis and make repairs both major and minor to all types of equipment and their components, including the duties of a Mechanic Helper, Utility and in the following areas: Suspension - air spring, hydraulic Pneumatic Systems - brakes, steering, accessories Hydraulic Systems - Brakes, Steering, Accessories Electrical Systems - starting and charging Ignition, Gas tune-up, Scope Analysis Chassis Wiring and Accessories Heating and Air Conditioning Installation and Removal of Fareboxes Welding - general knowledge and basic application Minor body work and panel replacement Installation and removal of Information Technology (I.T.) and electronic hardware. The candidate may also direct, in a training capacity, the activities of a Mechanic Helper when requested by management. The candidate must provide a complete set of tools to efficiently perform the job described. This includes a complete set of mechanic's tools (excluding special tools) up through 1¼ inch size wrenches and sockets, including metric tools required to do the job up to 20 mm. Reports To: Maintenance Supervisor Qualifications: Must submit a driving record from the State of Michigan for at least five (5) years prior to application and have no current points. Possess and maintain a valid driver's license from the State of Michigan. Must possess a Michigan Chauffeur based “BP” temporary instruction CDL permit (T.I.P.) prior to hire date. Must possess a valid State of Michigan Group B Commercial Driver License with Passenger and Air Brake Endorsement within 90 days of hire. Must possess three (3) State of Michigan certifications. Must be able to pass a written qualification test administered by CATA with a passing score of 70% or higher prior to the date of hire. Must be able to obtain an Industrial Forklift permit within 30 days of employment. CATA does operate 7 days a week, and you are expected to be available to work any shift. This is not seasonal or on-call work. Able to read and speak English with comprehension and follow procedures and policies. Very neat appearance. Consistently provide prompt, courteous, and appropriate service to the public. Must be able to pass a physical examination, vision screening, and drug screen administered by a physician designated by the Capital Area Transportation Authority. Punctual and reliable attendance as necessary to meet ongoing service requirements for public transportation. Physical Requirements: Lifting and carrying up to 100 lbs Constant standing, walking, bending, stooping, kneeling, crouching, crawling, climbing, balancing, and twisting Using hand to operate tools, grasp, push, pull, and steady arms for extended periods Precise finger movements for small parts and controls This job description is stated in general terms and does not describe all duties which may be assigned or required.

Transdev in Lansing, Michigan is seeking an experienced A-Level Mechanic to bolster our team. This role demands expertise in diagnosing, repairing, and maintaining various vehicles and equipment. As a Mechanic, you'll play a crucial role in ensuring safety, efficiency, and longevity for our vehicles. Transdev is proud to offer: Competitive compensation package of minimum $26.25 / hour - Maximum $35.38 / hour Benefits include: + Vacation: minimum of two (2) weeks + Sick days: 5 days + Holidays: 12 days; 8 standard and 4 floating + Other standard benefits: 401(k) retirement plan, medical, dental and vision, life insurance, short-term disability, voluntary long-term disability. + Company paid ASE testing, training materials, and tool reimbursement Benefits may vary depending on location policy. The above represents the standard Corporate Policy. Key Responsibilities: + Conduct diagnostic tests to identify issues and determine necessary repairs on diesel engines. + Perform routine maintenance tasks to prevent breakdowns and optimize performance. + Collaborate with team members to ensure efficient and accurate repairs + Complete preventative maintenance (PMs), safety inspections, and annual maintenance inspections. + Lead diagnostic tests to accurately identify complex issues and determine comprehensive repair strategies for diesel engines. + Perform advanced troubleshooting and repair tasks on diesel engines, including overhauling and rebuilding components to required specifications. + Provide guidance and mentorship to junior technicians, assisting them in developing their skills and knowledge + Other duties as required. Qualifications: + 4 or more years of experience as an automative service technician. + ASE certifications required; ASE certification program provided + Mechanic's Tool Set + Subject to a DOT drug testing and physical if applicable. DOT Regulation 49 CFR Part 40 does not authorize the use of Schedule I drugs, including cannabis, for any reason. Physical Requirements: + Must be able to work shifts or flexible work schedules as needed. + The employee is generally subjected to long periods spent sitting, typing, or looking at a computer screen. + Work environment will be a combination of both indoors and outdoors. About Transdev: Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thanks to safe, reliable, and innovative solutions that serve the common good. Find out more at ****************** or watch an overview video at ******************* O5cv0G4mQ The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. California applicants:Please Click Here for CA Employee Privacy Policy. Job Category: Maintenance / Mechanics / Parts / Utility / Materials Job Type: Full Time Req ID: 6387 Pay Group: YEY Cost Center: 165 The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions upon request. Transdev is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Applicants will receive fair and impartial consideration without regard to race, sex, color, national origin, age, disability, veteran status, genetic data, gender identity, sexual orientation, religion or other legally protected status, or any other classification protected by federal, state, or local law. Drug-free workplace If based in the United States, applicants must be eligible to work in U.S. without restrictions for any employer at any time; be able to pass a drug screen and background check. California applicants: Please Click Here for CA Employee Privacy Policy. About Transdev Cities, counties, airports, companies, and universities across the U.S. contract with Transdev to operate their transportation systems, maintain their vehicle and fleets, and deliver on mobility solutions. Transdev U.S. employs a team of 32,000 across 400 locations while maintaining more than 17,000 vehicles. Part of a global company, Transdev is a leader in mobility with operations in 19 countries, proudly operated by 110,000 team members from around the world. As an operator and global integrator of mobility, we are driven by our purpose. Transdev - the mobility company - empowers the freedom to move every day thank to safe, reliable, and innovative solutions that serve the common good. Find out more at http://****************** or watch an overview video.

Since 1922, we've recognized that our greatest asset is our team - which is why our people come first, even before the bottom line. When you join Toebe, you're joining a team that knows how to get the job done. We look for team members who share our commitment to excellence, thrive in an environment of innovation, and embody the values of Integrity, Safety, Teamwork, and Trust. We take pride in being a union-based heavy civil contractor that self-performs a wide range of work, partnering with local trade unions to employ Laborers, Carpenters, Equipment Operators, Cement Masons, and Teamsters. From experienced tradespeople to those just entering the workforce, we offer opportunities to build lasting careers in construction. Whether you're an apprentice, a seasoned professional, or somewhere in between, we welcome driven and career-oriented individuals who are ready to work hard, learn, and grow with us. For each trade, non-journey level employees may be placed in apprenticeship programs that offer individuals new to the industry On the Job Training (OJT) opportunities. The recruitment process will include a pre-employment background check, physical, and a drug screening. Mechanic A pre-employment physical and drug screen are required. Responsibilities include, but are not limited to: Carrying out routine truck and equipment maintenance and inspections Maintaining a variety of vehicles and equipment Troubleshooting and making general repairs Using a variety of hand and power tools Must acquire a Commercial Driver License (CDL) Working outdoors in all weather conditions Working at heights with the use of mobile equipment and ladders Frequently standing, using hands to operate tools, handling or feeling, reaching with hands and arms, climbing or balancing, and talking or hearing. Occasionally walking, sitting, stooping, kneeling, crouching, or crawling Works safely near and around highway traffic and noisy operations Ability to lift or carry up to 30-50 lbs, and occasionally up to 100 lbs Proud to be an Equal Opportunity Employer It is the policy of this Company to provide equal opportunities for all employees, and all applicants for employment, based on individual qualifications and without regard to race, color, religion, gender identity, age, national origin, citizenship, mental or physical disabilities, sexual orientation, veteran status, or any other similarly protected status. This principle applies to all aspects of employment, including recruitment, hiring, placement, transfer, promotion, demotion, layoff, or termination; rates of pay or other forms of compensation; and selection for training, including apprenticeship, pre-apprenticeship, and/or on-the-job training. It is our policy to comply with all applicable laws governing employment practices and not to discriminate on the basis of any unlawful criteria.* Applicants who apply for jobs electronically are included in the equal employment opportunity protections as part of the application process. The U.S. Equal Employment Opportunity Commission (EEOC) enforces Federal laws that protect you from discrimination in employment. For more information, please follow the link to the EEOC's Know Your Rights poster. *We reserve the right to run a background check prior to offering employment.

Our skilled trades professionals use their hands-on technical and mechanical abilities to work on a variety of unique equipment to our industry. We are looking for motivated individuals who have the strong ability to troubleshoot, problem solve and the desire to make tomorrow better than today. PADNOS recognizes the demand for skilled trades so we are teaming with educators to develop partnerships and create hands-on programs for students and individuals. PADNOS is a full-service recycling company handling paper, plastic, metals and electronic recycling. We tailor recycling programs for consumer and industrial clients throughout the United States. PADNOS was founded over a century ago and continues to transform the recycling industry. The company has thrived as a family business through four generations and has grown to be a market leader and best in class innovator. PADNOS has a rich history of taking care of our Team Members, their families and the multiple communities we serve. We invest in our Team Members and offer the following benefits: Competitive Wage Medical, Dental and Vision Insurance 100% Tuition reimbursement for employees 75% Tuition Reimbursement for dependents First Time Home Buying Assistance 401K Match and Profit Sharing Performance Driven Bonuses Heavy Equipment Mechanic Position Summary: The Mechanic will perform inspections and preventative maintenance on a variety of equipment such as semi-tractors, trailers, heavy equipment and machinery including brakes, suspensions, electrical, lighting and mechanical. Repair hydraulics, electrical and other mechanical components Troubleshoot and mechanical diagnosis to identify repair needs Prepare and complete required paperwork Heavy Equipment Mechanic Qualifications: One plus year of related diesel mechanic or related military training Knowledge of welding and torching helpful, but not necessary Mathematical and mechanical aptitude Related experience and knowledge of the methods, materials tools and techniques used in repairing semi tractors & trailers Strong communication skills, effective communicator Proven ability to work alone or in a team setting Attention to accuracy and detail Demonstrated safety consciousness Relevant Military experience

This individual should be friendly, knowledgeable of product, and devoted to always guaranteeing the D&D promise of 100% customer satisfaction. Job Requirements and Responsibilities: Provide excellent customer service Meet sales goals Utilize the elevated levels of sales and service to maximize sales performance Ability to learn and demonstrate an in-depth knowledge of the merchandise Maintain a keen interest in the industry and market trends Participation in the company events and sales Keep sales floor and merchandise neat, organized and stocked Keep stockroom and inventory maintained and organized Properly complete transfers, check-in orders, and follow all protocols and procedures Ability to meet all customer needs and guarantee customer satisfaction Complete all required training programs Ability to understand and adhere to all company policies and standards The ideal candidate: Self-motivated Friendly and enthusiastic Interest for the merchandise in the industry Customer service focused Some experience in retail Confidence and ability to effectively present information to customers Ability to work independently and as a team

Job Description Founded in 1988, Mersino is a single source for pumping services, contract dewatering, one-pass trenching, power generation and drilling. Our people are the most valuable asset, and we strive to maintain a culture that inspires dedication to customer service. Whether a planned project or an emergency response, Mersino meets challenges with expertise, equipment, and service. We move water. Location: Havelock, NC Job Summary: The primary responsibility of the Mechanic is to maintain, service, and repair the company's mechanical equipment, including pumps, generators, and related equipment. Typical Duties and Responsibilities: Service, repair, and maintain the company's fleet and mechanical equipment Troubleshoot mechanical breakdowns and execute necessary repairs Complete necessary service and maintenance on all equipment Perform quality checks on repaired equipment Perform manual disassembly and assembly of pumping equipment and mechanisms Repair and maintain submersible and centrifugal pumps as well as generators Maintain service order process, including providing descriptions of repairs on maintenance on mechanical equipment; file appropriate documentation as required Keep work area clean and organized for enhanced shop operations Maintain accurate service records on all equipment serviced Dispose of hazardous materials in compliance with company and regulatory agency requirements Adhere to applicable company and regulatory agency environmental, health and safety standards Ensure that The Mersino Way is a guiding document in all daily activities Qualifications: High school diploma or equivalent required; experience in the service and repair of large equipment preferred Degree or certificate in diesel or heavy-duty repairs or related field desired Planning and organizational skills in handling multiple projects Proficient in utilizing current technology to diagnose and repair mechanical equipment Specific Expectations: Ability to work outside in a variety of weather conditions Ability to work a flexible schedule to meet job requirements Skilled in use of various tools used to maintain and repair mechanical equipment Ability to read and interpret assembly and repair instructions, manuals and schematics Proficient in use of computer programs to maintain maintenance and repair records Ability to work effectively with others Ability to multi-task in a changing environment Strongly self-motivated, ability to perform tasks with little or no direction Required intermittent periods during which continuous physical exertion is required, such as walking, standing, stooping, climbing, lifting material or equipment, some of which may be heavy or awkward Physical Requirements: Never Occasional Frequent Continuous Never Occasional Frequent Continuous Sit X Walk X Stand X Drive X Lift/Carry Indicate Amount/Frequency Below Reach Above X 0-10 lbs X Bend/Stoop X 10-20 lbs X Use Hands for: Indicate Amount/Frequency Below 20-50 lbs X Pushing/Pulling X 50-100 lbs X Fine Manipulation X Over 100 lbs X Typing X Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time as needed.

Mechanic Job Description: We are seeking a skilled in-house Heavy Equipment Mechanic to join our team. Scheduled work hours will be 7:00-3:30 Monday-Friday. The ideal candidate will have a strong work ethic, be reliable, and possess excellent diagnostic and troubleshooting skills. The Heavy Equipment Mechanic will be responsible for maintaining and repairing various types of heavy equipment, including but not limited to brakes, hydraulic, pneumatic, and diesel systems. Responsibilities: Diagnose and troubleshoot mechanical issues on heavy equipment. Perform routine maintenance and repairs on equipment. Inspect equipment to ensure proper functioning. Maintain accurate records of repairs and maintenance. Communicate effectively with team members and supervisors. Adhere to safety protocols and guidelines. Qualifications: Minimum 2 years of experience as a Heavy Equipment Mechanic or similar role Proficiency in diagnosing and troubleshooting mechanical issues. Familiarity with airbags/brakes, hydraulic, pneumatic, and diesel systems Ability to work independently and as part of a team. Strong work ethic and attention to detail Benefits Comprehensive benefits package including 401(k), Dental insurance, Health insurance, Vision insurance, Life insurance, PTO and holidays.

Job DescriptionAre you eager to be part of an innovative team in the aviation industry, transforming the way we approach aviation technology?Our client stands as a prominent figure in the realm of aircraft window design, manufacturing, and the production of composite parts at their cutting-edge facility. Boasting ISO 9001:2015 / AS9100D certification, they specialize in aerospace window/windshield composite intricacies, sheet metal wing spars, and fuselage assemblies.They are currently on the lookout for a Regional Repair Sales / Aircraft Window Technician possessing an A&P License in locations including Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC.What's in It for You:Salary: $45,000-$60,000 annual bonus, potential for substantial monthly incentives Position Type: Permanent - Full-time. Benefits: Comprehensive package including Medical, Dental, 401k, Disability, Company-provided life insurance, and FSA.A Glimpse into the Life of an Aircraft Technician / A&P Mechanic:As the Aircraft Technician / A&P Mechanic, your primary mission is to provide aircraft window services to our existing clients while expanding our customer base and sales within your designated Regional Market. Your responsibilities include inspecting aircraft windows, assessing defects for airworthiness, repairing scratches, pits, and other window damage, as well as removing and installing replacement windshields and windows.Key Responsibilities: Removing existing windows. Preparing and installing new windows. On-call 24/7 to respond to customer requests for emergency AOG (Aircraft on Ground) services. Utilizing an orbital sander with various grits of sandpaper to restore damaged areas. Reviewing, interpreting, and applying technical data relevant to your tasks. Managing the acquisition of purchase orders from customers as per the provided quotes. Coordinating service schedules with aircraft owners/operators and maintenance managers. Completing and submitting billing information and evaluation forms to our headquarters in Wichita, KS. Providing the necessary airworthiness documents to customers upon job completion. Traveling as required to customer locations via ground transportation, air travel, or airlines. Compiling weekly expense reports detailing costs for gasoline, entertainment, and customer relations. Signing off on all work orders and maintaining part traceability records. Conducting daily visits and/or phone communication with both current and potential customers. Developing and expanding sales in the assigned Regional Market. Seeking guidance and direction as needed for your duties. Keeping your supervisor/manager informed of the status of your work. Reporting problems and potential issues to your supervisor/manager as soon as possible. Maintaining a neat and orderly work area. Presenting a well-groomed appearance suitable for the role and context. Respecting the confidentiality of company, customer, and personnel information. Performing additional duties and tasks as assigned by your supervisor. Assisting and training other employees as required. Qualifications: Education: High School Diploma/General Education Degree (GED). Experience: Preferred sales experience, 1 year of orbital sanding experience preferred, auto body experience preferred, previous aircraft experience preferred, A&P license or AMT certificate preferred, sales experience preferred. Technical Skills: Proficiency in using various measuring devices, strong mechanical aptitude, ability to read and interpret blueprints (preferred), ability to read and interpret technical manuals. Problem Solving/Decision Making: Ability to read and comprehend mechanical and technical manuals, applying them to practical field situations. Capability to work independently and communicate effectively with both internal and external customers, delivering exceptional customer service in a timely manner. Essential Job Functions/Physical Demands: The physical demands encompass standing on wings, moving in and out of cockpits, and working inside and outside aircraft. Travel is a requirement, with working hours ranging from 2 to 12 per day depending on demand. Ability to stand and/or sit for 8 hours a day. Ability to lift/carry weights of up to 70 lbs. Ability to twist, bend, and stoop for 8 hours a day. Ability to pinch and grip various tools with fingers and hands, using pushing and pulling motions for 8 hours a day. Ability to reach for 8 hours a day. Clear and effective communication skills. Proficiency in understanding and following work orders and process specifications. Capability to handle buffing and polishing tools for 8 hours a day. Comfort with climbing up and down ladders. If you're intrigued by the Aircraft Technician / A&P Mechanic role in Mesa, AZ, Orlando, FL, Battle Creek, MI, Provo, UT, and Greensboro, NC, seize the opportunity today!This job opportunity is presented by Total Aviation Staffing, LLC, an Employment Agency providing aviation staffing services.

Job DescriptionMECHANICS: SCORE THE HIGHEST-PAYING AUTO JOBS WITH CARGUYS INC! Where: Top Dealerships & Shops Nationwide Type: Full-Time, Industry-Leading Pay + Fat Bonuses Who: Rookie Techs to Master Mechanics - We Want YOU! Tired of lowball offers and dead-end gigs? CarGuys Inc. is the #1 recruiter hooking up Auto Mechanics (Technicians) with elite dealerships and repair shops that pay the HIGHEST WAGES IN THE INDUSTRY. We're talking life-changing paychecks, cutting-edge shops, and jobs that make you stoked to grab your toolbox every day. Ready to level up? Let's roll! Why CarGuys Inc. DELIVERS for Mechanics: TOP PAY, GUARANTEED: We ONLY partner with shops and dealers shelling out the highest wages, plus signing bonuses and performance cash to pad your pocket. ELITE SHOPS, YOUR STYLE: Work in high-tech bays with the latest tools, lifts, and diagnostics - from local hotshots to big-name chains. Imports, exotics, EVs, you name it! CAREER BOOST: Land gigs with paid training (EV, ADAS, ASE certs) and fast tracks to Lead Tech or Shop Foreman. We match your hustle to your dream role. YOUR JOB, YOUR TERMS: Our recruiters hand-pick shops that fit YOUR vibe - killer culture, short commutes, and respect for your skills. 100% FREE FOR YOU: Our service costs you NOTHING. Dealers pay us to find pros like you, so you just cash in on the best jobs. What You'll Do: Fix everything from oil changes to engine overhauls with pro-level precision. Master cutting-edge diagnostics to solve problems like a boss. Join teams that live for cars and crush it in high-energy shops. Who We Want: Car Junkies: You eat, sleep, and breathe automotive. Any Skill Level: From newbies with drive to ASE-certified legends. Toolbox Warriors: Got your tools? Bring the heat. Clean License: Valid driver's license, clean record a plus. Mechanics RAVE About Us: “CarGuys Inc. got me a dealership gig with insane pay and EV training in DAYS. Best move I ever made!” - Tony, Master Tech “I was underpaid and overworked. CarGuys landed me a shop with a fat bonus and a crew that's like family!” - Kayla, Auto Tech DON'T SLEEP ON THIS - YOUR BIG BREAK IS NOW! Why settle for less? Join the mechanics cashing in with CarGuys Inc. and lock in a job that pays you what you're WORTH. Apply NOW! Skills:State Engine Repair Certification, State Engine Tune-up/Performance Certification, State Front End, Suspension & Steering Systems Certification, State Brakes & Braking Systems Certification, State Automatic Transmission Certification, State Manual Transmission, Front & Rear Drive Axles Certification, State Electrical Systems Certification, State Heating & Air Conditioning Certification, State Pre-1973 Vehicles Certification: over 10,000 pounds GVW, State Engine Repair - Gasoline Certification, State Engine Repair - Diesel Certification, State DriveTrain Certification, State Brakes & Braking Systems Certification, State Suspension & Steering Systems Certification, State Electrical Systems Repair Certification categories for other on-road vehicles are: State Collision-Related Mechanical Repair Certification, State Unitized Body Structural Repair Certification, State Motorcycle Repair Certification, State Recreational Trailer repair Certification: ASE Engine repair certification, Automatic transmission/transaxle certification, ASE Manual DriveTrain & Axles, ASE Suspension & Steering, ASE Brakes, ASE Electrical/Electronic Systems, ASE Heating and Air Conditioning, ASE Engine performance. Automotive mechanic, automotive technician, automotive service tech, automotive service technician, auto tech, auto mechanic, factory trained technicians, warranty repairs, certified pre-owned inspections, recall repairs, customer satisfaction surveys, CSI, express service, express technician. Express service lane You are applying through Car Guy's Inc, America's and Canada's #1 Automotive Recruiter. Companies all over America and Canada hire us to find them qualified candidates. If deemed a qualified candidate your resume will be forwarded to a local dealer.

Job DescriptionAutomotive Prototype Mechanic Are you passionate about vehicles and interested in new technology? Are you ready to accelerate your career, experience growth and advancement as a direct hire team member? If you answered "yes" to any of the above questions, please share your resume with us! We have programs with immediate opportunities! We have a dynamic environment supporting opportunities for team members to work on unique projects. Essential Duties & Responsibilities: • Perform work as outlined in the project plan with efficiency and accuracy • Provide input aligned with your experience and training • Track and report progress • Meet delivery timing for assignments • Maintain clean and safe work environment Qualifications: • Prior automotive experience • Detail oriented, organized, and efficient • Focus on Safety and Quality • Reliable - must report and engage as scheduled • Great attitude toward work and learning • Mechanic tool set in roller toolbox Additional Experience Supporting Expanded Opportunities: • ASE Certification • Restoration and/or custom • Fabrication • Low Voltage Wiring • High Voltage Training • High Performance Vehicles MARTIN Technologies (MARTIN) is a full-service, global engineering and manufacturing company supporting OEM and Tier customers in the automotive, marine, aerospace and defense industries. Our customers include OEMs, Tiers, Start Ups, Fleets, Clubs, Race Teams, and Enthusiasts. We are leaders in the mobility industry and excel with innovative methods and best practices in support of the world's best customers. Our global experience and broad capabilities provide an exciting and diverse environment for the continuing growth of our team. Visit *********************** to see our expanded global activities Powered by JazzHR QYP2BqnyIk

Fraza & Vitan Equipment is looking for an experienced Forklift Technician to repair heavy equipment. You'll service, diagnose, and maintain forklifts and material handling equipment-no two days are the same. Why you'll love it here: Hourly pay based on experience Company vehicle provided No weekends & flexible schedule PTO, medical, dental, vision, 401(k) with match Commission opportunities What you'll do: Diagnose and repair mechanical, electrical, and hydraulic issues Perform preventative maintenance to keep equipment in top shape Travel to customer sites-variety of work every day Ensure equipment is safe and meets standards Keep accurate records of work performed What you'll need: 2+ years' experience in forklift or heavy equipment repair (electric, propane, diesel) Strong troubleshooting skills and safety focus Valid driver's license Get to know us: Fraza and Vitan Equipment is a full-service material handling business with over 300 skilled employees across Michigan and the East Coast. Our team uses innovative equipment and processes to push your business forward and increase efficiency. We're always on the lookout for talented individuals to join our team and grow their careers in a challenging but positive environment. Take the next step in your career-apply today!

: Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here. Job Posting External Job Duties * Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. * Perform all assigned planned maintenance on customer lift trucks. * Maintain a service van and its inventory. * Process paperwork after completion of each job. Minimum Qualifications * Less than 2 years related experience * High school diploma or equivalent * Valid driver's license, good driving record, and ability to safely operate lift trucks. Preferred Qualifications * Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. * Good written/verbal communication and customer care skills. * Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. * Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. * Industry related training is preferred * Ability to read and understand service manuals, plan, and follow-through Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: * Award-Winning Service Training * Company Vehicle for Field Service Technicians * Tool Insurance * No Flat Rate * 40 Hours Per Week plus Overtime * Uniforms * Specialty Tools * Primarily 1st Shift * Career Advancement Opportunities EOE Veterans/Disabilities Nearest Major Market: Detroit Job Segment: Warehouse, Forklift, Diesel Mechanic, Maintenance, Maintenance Mechanic, Manufacturing

Job DescriptionSalary: The Field Service Mechanic reports to our main office in Commerce Township, and is often dispatched to our job locations, which can be found all over the state of Michigan. C.A. Hull union employees enjoy amazing benefits including: Union health benefits Competitive wages On-the-job Training Career Development Award-Winning Safety Program Incentive Programs Pre-employment physical, drug screen, and background checks are required. If you are selected for consideration you will receive an email, so please keep an eye out for communication from us! Field Service Mechanic duties include, but are not limited to: Performing routine heavy truck and equipment maintenance and inspections Servicing a variety of vehicles and equipment, including semis and medium-duty trucks, trailers, excavators, loaders, dozers, cranes, generators, air compressors, and specialty equipment Troubleshooting and making general repairs Operating a variety of hand and power tools Possess a chauffeurs license, and be willing to obtain a Commercial Driver License (CDL) within 1 year of employment Working outdoors in all weather conditions; including but not limited to, snow, rain and varying temperatures Working at heights with the use of mobile equipment and ladders Frequently required to stand, use hands to hold hand and power tools, finger/handle/feel, reach with hands and arms, climb or balance, talk or hear. Occasionally, the work requires the employee to walk, sit, stoop, kneel, crouch or crawl Working safely near and around highway traffic and noisy operations Ability to lift or carry up to 10 or 25 lbs., and occasionally up to 50 lbs An Equal Opportunity Employer It is the policy of this company to assure that applicants are employed, and that employees are treated during employment, without regard to their race, religion, sex, sexual orientation, gender identity, color, national origin, age, or disability. Such action shall include: employment, upgrading, demotion, or transfer; recruitment or recruitment advertising; layoff or termination; rates of pay or other forms of compensation; and selection for training, including apprenticeship, pre-apprenticeship and/or on-the-job training. Christine Niswander, EEO Officer

CATA is hiring for a Mechanic First Class to join our growing Maintenance team. This position offers a $7,500 signing bonus, competitive rates and great benefits! Job Summary - Essential Functions: Inspection, diagnosis, and repairs, both major and minor, to various types of equipment and their components, including the duties of a Mechanic Second Class, Mechanic Helper, Utility and the following areas: Complete diesel tune-up, overhaul, and components Complete gas overhaul Complete light and heavy-duty transmission overhaul Machining - i.e., valve grinding Differential overhaul Suspension - air spring, hydraulic Pneumatic Systems - brakes, steering, accessories Hydraulic Systems - Brakes, Steering, Accessories Electrical Systems - starting and charging Ignition, Gas tune-up, Scope Analysis Chassis Wiring and Accessories Heating and Air Conditioning Installation and Removal of Fareboxes Welding - general knowledge and basic application Minor bodywork and panel replacement The candidate must provide a complete set of tools to efficiently perform the job described. This includes a complete set of mechanics tools (excluding special tools) up through 1¼ inch size wrenches and sockets, including metric tools required to do the job up to 20 mm. Qualifications: Possess and maintain a valid driver's license from the State of Michigan and submit a clean five (5) year driving record with the application. Must possess a Michigan Chauffeur-based “BP” temporary instruction CDL permit (T.I.P.) prior to hire date. Must possess a valid State of Michigan Group B Commercial Driver License with Passenger and Air Brake Endorsement within 90 days of hire. Must be able to obtain an Industrial Forklift permit within 30 days of employment. CATA does operate 7 days a week, and you are expected to be available to work any shift This is not seasonal or on-call work. Able to read and speak English with comprehension and follow procedures and policies. Very neat appearance. Exceptional attendance is required to meet ongoing service requirements for public transportation. Must be dependable. Consistently provide prompt, courteous, and appropriate service to the public. Must be able to pass a physical examination, vision screening, and drug screen administered by a physician designated by the Capital Area Transportation Authority. Must be able to pass the ASE test on Preventative Maintenance (PM), six (6) of the State of Michigan certification tests, and pass a written qualification test administered by the Authority with a passing score of 70 percent (70%). This job description is stated in general terms and does not describe all duties which may be assigned or required.

Our skilled trades professionals use their hands-on technical and mechanical abilities to work on a variety of unique equipment to our industry. We are looking for motivated individuals who have the strong ability to troubleshoot, problem solve and the desire to make tomorrow better than today. PADNOS recognizes the demand for skilled trades so we are teaming with educators to develop partnerships and create hands-on programs for students and individuals. PADNOS is a full-service recycling company handling paper, plastic, metals and electronic recycling. We tailor recycling programs for consumer and industrial clients throughout the United States. PADNOS was founded over a century ago and continues to transform the recycling industry. The company has thrived as a family business through four generations and has grown to be a market leader and best in class innovator. PADNOS has a rich history of taking care of our Team Members, their families and the multiple communities we serve. We invest in our Team Members and offer the following benefits: Competitive Wage Medical, Dental and Vision Insurance 100% Tuition reimbursement for Team Members 75% Tuition Reimbursement for dependents First Time Home Buying Assistance 401K Match and Profit Sharing Performance Driven Bonuses Tractor/Trailer Mechanic Position Summary: The Mechanic will perform inspections and preventative maintenance on a variety of equipment such as semi-tractors, trailers, heavy equipment and machinery including brakes, suspensions, electrical, lighting and mechanical. Repair hydraulics, electrical and other mechanical components Troubleshoot and mechanical diagnosis to identify repair needs Prepare and complete required paperwork Tractor/Trailer Mechanic Position Qualifications: One plus year of related diesel mechanic or related military training Knowledge of welding and torching helpful, but not necessary Mathematical and mechanical aptitude Related experience and knowledge of the methods, materials tools and techniques used in repairing semi tractors & trailers Strong communication skills, effective communicator Proven ability to work alone or in a team setting Attention to accuracy and detail Demonstrated safety consciousness Relevant Military experience #IND123 Be a part of the green movement and join PADNOS today! PADNOS is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, weight, height, sex, sexual orientation, marital status, national origin, age, genetic medical information, protected veteran status, or disability status.

Drive your career forward and win a key role in leading the advancement of automotive technology. MARTIN Technologies is a full-service, global engineering and manufacturing company with capabilities in the automotive, marine, aerospace, and defense industries. We excel with innovative methods and best practices supporting the world's best customers. We have immediate career opportunities. We are currently seeking several Prototype Automotive Mechanics to join our team in Novi, MI. Job responsibilities include: Retrofit of vehicles Upfit of vehicles Diagnostics of build concerns Diagnostics of vehicle programming Assist engineering team with troubleshooting, root cause analysis and corrective action Complete reports on concerns found during assigned project Tracking personal progress to ensure department and corporate objectives are met Maintain delivery timing on assignments Quality checks of pre and post builds. Minimum Qualifications: 3+ years of automotive mechanic experience Experience with equipment such as hoists, liquid evacuation, tools for engine removals, other Willing to work overtime as needed Strong automotive mechanical skills, problem solving skills Vehicle diagnostics, vehicle re-flash programming Reasonably skilled in the understanding of vehicle operation in HVAC, Fuel/Exhaust, Brake System, Engine Electrical, Body Electrical, Transmission/Transfer case, Front-Wheel Drive Transaxle, Automatic Transmission, Minor Body/Interior. Reasonable computer skills in accessing, reading, and inputting required vehicle repair data State of Michigan, ASE, and/or manufacturer certifications a plus

Job Description Fraza & Vitan Equipment is looking for an experienced Forklift Technician to repair heavy equipment. You'll service, diagnose, and maintain forklifts and material handling equipment-no two days are the same. Why you'll love it here: Hourly pay based on experience Company vehicle provided No weekends & flexible schedule PTO, medical, dental, vision, 401(k) with match Commission opportunities What you'll do: Diagnose and repair mechanical, electrical, and hydraulic issues Perform preventative maintenance to keep equipment in top shape Travel to customer sites-variety of work every day Ensure equipment is safe and meets standards Keep accurate records of work performed What you'll need: 2+ years' experience in forklift or heavy equipment repair (electric, propane, diesel) Strong troubleshooting skills and safety focus Valid driver's license Get to know us: Fraza and Vitan Equipment is a full-service material handling business with over 300 skilled employees across Michigan and the East Coast. Our team uses innovative equipment and processes to push your business forward and increase efficiency. We're always on the lookout for talented individuals to join our team and grow their careers in a challenging but positive environment. Take the next step in your career-apply today! Powered by JazzHR pNGmeemTHr

:** Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here (****************************** _._ **Job Posting External** **Job Duties** + Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. + Perform all assigned planned maintenance on customer lift trucks. + Maintain a service van and its inventory. + Process paperwork after completion of each job. **Minimum Qualifications** + Less than 2 years related experience + High school diploma or equivalent + Valid driver's license, good driving record, and ability to safely operate lift trucks. **Preferred Qualifications** + Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. + Good written/verbal communication and customer care skills. + Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. + Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. + Industry related training is preferred + Ability to read and understand service manuals, plan, and follow-through **Work Authorization:** Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. **Compensation and Benefits:** Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: + Award-Winning Service TrainingCompany Vehicle for Field Service TechniciansTool InsuranceNo Flat Rate40 Hours Per Week plus OvertimeUniformsSpecialty ToolsPrimarily 1st ShiftCareer Advancement Opportunities EOE Veterans/Disabilities