Engineering Technician jobs at NANA

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch ( This branch is due to move to a new location in Apopka in early 2026) . The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch ( This branch is due to move to a new location in Apopka in early 2026) . The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Omaha, NE, branch. The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Omaha, NE, branch. The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

Steel Nation is a Turn-Key Construction & Engineering Firm with focus in the Energy, Water/Wastewater, Healthcare, Commercial and Heavy industrial sector. To best serve our clients, Steel Nation is made up of three synergistic divisions: Steel Nation Buildings, Steel Nation Facilities, and Steel Nation Environmental. Reimagine your design career with one of the region's premier construction and engineering firms. Steel Nation offers the opportunity to progress your CAD Design skills with some of the best construction talent in the industry. The Steel Nation CAD Designer provides the design inspiration, requirements, and schematics for our construction projects and Steel Nation metal buildings. Why Steel Nation? Be a part of an expanding company Exciting, Close-Knit, and fast paced team environment. Entrepreneurship focused and supported Three Divisions to offer future career opportunities What will I do? Take CAD files created by Metal Building Systems for sold projects Create a Coordination Set of Drawings to Incorporate all Components sold on project. Cloud and request verification for conflicting or needed information Update Drawing database with coordination Submittal and Received Dates in Monday.com Revise Coordination to incorporate client's comments. Upon Steel Nation Engineer, Designer may be requested to: redline building and component quotes to align with approved information gathered from the Coordination Drawing Approval Process Design Buildings in MBS. Qualifications and Skills: Degree in Drafting and Design, Design, CAD experience in the construction field, or related field Minimum 1 to 3 years of experience in CAD Design Working knowledge of CAD software; Revit experience is a plus PEMB design knowledge is preferred Knowledge of construction trades such as Foundation, Plumbing, Electrical, Steel Fabrication is a plus Strong overall Microsoft Office knowledge and overall software aptitude Proven detail-orientation and analytical skills Excellent organizational ability and communication skills We offer compensation and a flexible work schedule along with the opportunity for professional growth with a leading construction and engineering company who focuses on our clients and service. Steel Nation specialties include I.S. Networld Certified, Design/Furnish/Build - Oil & Gas Mid-Stream & Transmission facilities, Design/Furnish/Build - Mixed Uses Buildings, Expertise in Sound Mitigation & Air Handling, Fast-Track Design to Erection in 6-8 Weeks, and 100% Made in the USA

Thalle Construction Co., Inc. is pleased to announce a career opportunity for a Quality Control Technician on the Central Everglades Planning Project (CEPP) Everglades Agricultural Area (EAA) A-2 Reservoir in Palm Beach County, Florida. This project marks the largest contract in the Jacksonville District's history, valued at $2.87 billion. Thalle will oversee the construction of a 17.75-mile embankment dam and associated structures. This project offers potential Project Team members a valuable opportunity to broaden their professional experience and advance their careers throughout its duration. The CEPP plays a vital role in Everglades restoration, aiming to enhance ecosystem health, improve water storage, and increase resilience to climate change. Thalle, established in 1947, is a heavy civil construction company with a corporate office located in Hillsborough, NC and a regional office in Alvarado, Texas. Thalle currently has active heavy civil construction projects spanning from New York to South Florida to Texas and continuing to expand our geographical footprint. Our diverse and expansive project scope of heavy civil infrastructure projects incorporates all degrees of civil construction that includes but is not limited to; Conventional Concrete, Roller Compacted Concrete and Earthen Dams, Navigational Waterway Locks, Reservoirs, Large Diameter Underground Utilities, Treatment Facilities, Landfills, Site Work, Mass Soil & Rock Excavation, Coal Ash Closures, DOT Highway & Bridge Construction, and on demand emergency services, etc. We are a proud representative of The Tully Group (Tully) who was established in 1921 and developed into one of the nation's largest privately held, family-owned construction firms. Tully's corporate office, located in New York City, has provided an opportunity to develop and sustain a long history of heavy civil projects in the Metro New York Area and New Jersey. Visit ***************** for more information. Safety is our TOP priority! Thalle offers a competitive salary package with a full range of benefits, including Major Medical, Dental, Vision, Short and Long-Term Disability, generous PTO, paid company holidays, Life Insurance, and 401K with a company match, and more! Compensation is based on experience and qualifications. Thalle is an Equal Opportunity Employer, E-Verify, and Drug Free Workplace. Location: Palm Beach County, FL Job Title: Quality Control Technician Overview: The Quality Control Technician is responsible for full inspection of products and installation to ensure compliance with the contract plans and specifications. This position reports to, collaborates with, and follows the direction of the Quality Control Manager. Duties and Responsibilities: Inspect work during construction and during final inspection to ensure compliance with the contract documents. Provide inspection for surface preparation, concrete testing data, formwork, misc. metals, reinforcing bar, water stop, concrete finish and curing operations. Review installation plans and materials to ensure compliance with the contract document. Prepare daily field inspection reports. Report deficiencies to the project Quality Control and Operations Teams. Education and/or Work Experience Requirements: 5 (+) years' experience in the area of heavy civil works construction similar to the work being performed at this project. Ability to interpret complex construction plans and specifications. Ability to write reports using Microsoft Word or Excel. Ability to work with a fast-paced team in an aggressive construction environment. United States Army Corps of Engineers Project Experience is preferred. Strong ability to multitask, work independently under pressure, and within tight deadlines. Prior heavy civil site project experience such as water control, dam, levee, concrete, and mass excavation experience. Physical Requirements: Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state, and local standards. Must be able to lift and carry up to 50 lbs. Must be able to move freely about a construction site that at times present a demanding terrain including, but not limited to climbing of ladders and stair towers, uneven and often wet surfaces, and slopes. Must be able to talk, listen and speak clearly on telephone.

Responsibilities Conduct quality inspections on incoming concrete deliveries to insure proper mix being used. Assist in concrete service issues. Assist with jobsite inspectors as well as testing companies. Maintain accurate records of any issues on jobsite. Collaborate with production teams to address quality issues. Skills Concrete construction experience Ability to interpret blueprints Familiarity with testing equipment and industry standards Excellent attention to detail with strong analytical skills. Ability to work collaboratively in a team environment while maintaining independent judgment

Permit Coordinator - St. Cloud, Florida A WORLD LEADER IN TESTING, INSPECTION & CERTIFICATION SERVICES Bureau Veritas offers dynamic, exciting employment opportunities with an attractive salary/benefit package and an opportunity to play a vital role with a global organization. If you would enjoy working in a dynamic environment and are looking for an opportunity to become part of a stellar team of professionals, we invite you to apply online today. Bureau Veritas is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, citizen status, sexual orientation, genetics, status as a protected veteran, or any other non-job-related characteristics. The Permit Coordinator is responsible for inspection scheduling, inspection reporting, and plan review processing, while completing organizational and administrative tasks to support the department's daily operations. Strong attention to detail and organizational abilities are needed to successfully sort and keep track of various time-sensitive tasks. The Permit Coordinator must be able to apply problem-solving and critical thinking skills for problem resolution when conflicts arise. Essential Duties and Responsibilities include the following. Other duties may be assigned. Process inspection requests and schedule inspections following company established procedures. Provides support for administrative functions in the assigned department. Answers incoming calls; processes mail, faxes, copying, FedEx shipments, etc. Manages the workload to ensure all tasks are completed within the established timeframes. Process final packets for Certificates of Occupancy or Completion. Assists clients to meet construction goals and timeframes. Identify and report conflicts or issues with scheduling and/or company databases. Communicates scheduling changes with staff and clients. Performs data entry and maintenance of company databases, directories and records. Performs a variety of essential record keeping duties, and maintains department record keeping and filing systems Process plans for review, acting as liaison between staff and client Assists with any other duty that is required to ensure inspections are scheduled and reported accurately. Performs other related duties, as directed. NOTE: Management retains the discretion to add to or change the duties of the position at any time. Experience: High school graduate with, at least, 3 years of office experience General knowledge of the Construction Industry Proficient with Microsoft Office programs Excellent communication skills with high level of English proficiency, both written and verbal, with an exhibited high level of professionalism. Extreme attention to detail, organizational and time management skills Skills: Knowledge of general office equipment- copier/fax/scanner, phone Problem-solving abilities Excellent customer service skills Must be able to understand and follow instructions Ability to work well with others in a collaborative team environment High energy level and able to work in a fast paced environment Computer Skills: Demonstrated knowledge of a variety of computer software applications in word processing, spreadsheets, document and database software (Outlook, Word, Excel, Adobe Acrobat). Work Environment: An employee in this position typically works in an office environment with controlled climate. Outside office travel is limited. Physical Demands: While performing the duties of this Job, the employee is regularly required to sit and work with computer systems for extended periods of time. The employee is occasionally required to lift up to 20 pounds. The vision requirements include: ability to adjust focus, distance vision and close vision.

About Our Client: Our client, a Fortune 500 Medical Device company, is recognized as one of the “World's Best Workplaces” and a “Best Workplace for Diversity” by Fortune Magazine! This company has climbed to the top, gaining a reputation for both excellence and satisfaction and is hiring individuals who are self-motivated, results driven, and take pride in the impact their work has on patients and healthcare professionals. Key Responsibilities: Supporting and assisting engineers in designing, developing, producing, and testing components and equipment. Preparing detailed technical drawings, schematics, and layouts to support engineering projects. Conducting materials testing, analyzing results, and documenting findings. Performing equipment maintenance, calibration, and mechanical/electrical repairs. Monitoring and testing prototypes, models, and products under development. Writing technical reports, identifying issues, and suggesting corrective solutions. Collaborating with engineers and cross-functional teams to resolve technical problems. Operating, troubleshooting, and maintaining complex instruments, gauges, and testing equipment. Qualifications: Technical training or hands-on experience preferred. Demonstrating experience with complex instruments, testing equipment, and gauges. Applying technical troubleshooting skills to mechanical and electrical systems. Utilizing attention to detail and problem-solving to support engineering projects. Showing knowledge of CAD software or other engineering tools. Applying familiarity with manufacturing processes and product development cycles. Demonstrating effective communication skills in documenting and presenting technical findings. NO C2C CANDIDATES Interested Candidates please apply on our website at https://jobs.jblresources.com. For more information about our services and great opportunities at JBL Resources, please visit our website: https://www.jblresources.com. JBL Resources is proud to have earned the reputation of being a premier provider of top talent professionals in the fields of engineering, human resources, logistics, operations, and supply chain management. As specialists in both permanent placement and contract services, our mission is to help companies and individuals become all they were created to be. **JBL is an Equal Opportunity Employer and E-Verify Company

Job Details Baytown, TX Full TimeDescription The Technical Engineer is responsible for providing exceptional customer service and technical support for the Material Take-off service by participating in client meetings, gathers and analyzes project specifications and data from model software for take-off process. This individual collaborates with sales, clients, and engineering to meet all project requirements and deliverables. POSITION DUTIES AND RESPONSIBILITIES: Serves as project liaison between engineering, sales, and the client to gather needed project documents. Participates in client sales meetings to understand the scope of work and explain to the client what information is needed to execute take-off process. Creates a plan outlining the execution of the work and the data download process to be reviewed with the clients. Gathers, analyzes, and documents information and data from models to support take-off process. Reviews project information, models, and details received for a variety of take-off projects. Proactively communicate with customers and sales to ensure all commitments and obligations are met and/or exceeded throughout the project/order. Proactively identify project issues and implement effective solutions. Keep abreast of latest developments in Revit software. Other duties as assigned to support the growth of MSI. Qualifications Bachelor's degree in Engineering or certification in Project or Construction Management, Business Management or related field (significant relevant experience will otherwise be considered). Must have hands-on experience and be proficient in using Revit software. Must be able to read/interpret construction 2D/3D drawings and blueprints and project specifications. Above average proficiency in MS Office Products, proficient skill level in Excel. Ability to effectively communicate technical concepts related to Revit to non-technical stakeholders, such as clients or sales prospects. Strong interpersonal and communication skills and the ability to work effectively with a wide range of personalities. Self-directed and able to independently manage time and projects in a fast-paced environment; results driven. PHYSICAL DEMANDS AND WORK ENVIRONMENT: There is a minimal risk of injury. Work hours are generally during normal business hours and average over 40 hours a week. May require some additional hours when working with customers. Some business travel may be required. #LI-DNI

Amarr, a part of ASSA ABLOY (the global leader in opening solutions), is a leading manufacturer of residential and commercial garage doors. We are committed to delivering high-quality products and exceptional service to our customers. As we continue to grow, we are seeking a responsible and detail-oriented professional to join our team as an Engineering Technician I in our Lawrence, KS location. An Engineering Technician 2 is responsible for performing a variety of technical duties relating to mechanical, fabrication, machining, assembly, plumbing, and debugging of custom build machinery, dies, and fixtures. The differences between classifications are the level of mastery of the essential functions, the degree of supervision required when performing these functions, and the amount of lead direction provided to others. Engineering Technician 2: Skilled level. The Technician works under engineering supervision, independently performing the essential functions at a skilled level. ESSENTIAL ACCOUNTABILITIES: Troubleshoots basic equipment issues in production environment. Troubleshoot and or repair basic hydraulic, pneumatic and mechanical components. Provides support in areas of fabrication, assembly, welding, and machining. Assemble and debug modified and custom designed equipment, dies, and fixtures independently with engineering supervision. Work from oral and written instructions. Maintains adherence to company policy, safety standards, and good housekeeping practices. Understanding of engineering drawings. Assumes other duties as assigned by leadership. Typical Duties: Diagnose equipment issues. Performs repairs on equipment independently with engineering supervision. Assist engineering and maintenance in the debugging of simple custom designed equipment. Performs fabrication, assembly, welding, machining, and grinding operations. PHYSICAL REQUIREMENTS: Light office duties and activities. Ability to work within a production facility, often times requiring prolonged standing and walking. Ability to inspect machinery, often times requiring movement of machinery or garage door parts. Extended time on feet. Manual dexterity and hand to eye coordination with hand/power tools. Frequent stooping, bending, walking, carrying, and lifting (up to 50 pounds). MINIMUM QUALIFICATIONS REQUIRED (EDUCATION/EXPERIENCE/KNOWLEDGE/SKILLS): High school graduate or equivalent. Have basic machinist tools. Work from oral and written instructions. Able to fabricate, machine, weld, grind, and assemble components. Skilled in the operation of machine shop equipment. Skilled in sheet metal fabrication. 4 Years minimum machine shop experience. Benefits include Medical/Dental/Vision, Paid Time Off, Paid Holidays from day one, tuition reimbursement, and a 401k plan (with an automatic 3% company contribution, regardless of your contribution after your first year of employment) among others. The Mission: We are part of a global company, ASSA ABLOY, with a diverse range of opportunities, both locally and abroad. We offer a competitive salary, training and the opportunity to develop and enhance your career. We take great pride in the efforts of our team members who create a supportive team environment and make Amarr and ASSA ABLOY such a great place to work. Our goal is to be a world-leading company that attracts diverse talent, where all team members feel safe being their true selves and are able to thrive in a work environment that promotes change, innovation, and provides equal access and opportunity. As one of North America's leading garage door manufacturers, Amarr Company takes pride in fostering a culture where employees enjoy many opportunities for career growth, rapid advancement, and relocation to some of America's most desired cities. Although Amarr Company is an international business, employees enjoy a family-oriented, caring culture and rewarding work environment. Amarr Company offers competitive wages, generous benefits, and a bonus program for every employee. At Amarr Company, the door is always open and there is no ceiling to your career growth. Amarr is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status.

Job Duties and Responsibilities: The CSET shall provide management support to the FEAD/ROICC for construction services such as construction inspection, quality assurance, monitoring ESS compliance and contract administration. The construction work includes repair, demolition, and new construction that the office executes for various commands and tenants on the installation. Work will encompass all trades that are typical for repair, demolition, and new construction projects. Specific workload will be identified upon arrival. Coordinate request from the construction Contractor for outage requests, excavation permits, burn permits, haul routes and other similar items. Attend Meetings and Conferences. The CSET shall take notes, provide information to the FEAD/ROICC or the FEAD/ROICC's representative at meetings, conferences, and briefings. Includes: Preconstruction Conference, Safety Meetings, Contractor Quality Control (CQC) Meetings, Partnering Meetings. Provide Construction Briefings and Reports. Provide review of submittals designated for Government approval. Provide construction schedule review/analysis and notes/comments/recommendations on: Progress Schedules and Network Diagrams, Contractor's Safety Plan, and CQC Plan. Monitor construction work for project CQC compliance with the contract and Contractor submitted plans. Prepare Construction Representative's Reports (CRRs) and Contract Construction Compliance Notices (CCCNs). Report instances of non-compliance with safety requirements. Monitor compliance with environmental protection requirements; monitor measurements and assurance surveying; monitor materials testing Witness testing of waste, gas, water, electrical, heating, ventilation, air conditioning, fire protection, elevator, boiler, and energy monitoring control systems. Review Daily Contractor Quality Control (CQC) and Contractor Production Reports (CPRs); monitor the updating of Submittal Status Logs; and other required documentation. Work with the CSET and FEAD/ROICC personnel to complete, together with the construction Contractor's representative, the field pay estimate worksheet for the construction contract. Notify FEAD/ROICC Leadership of disagreements, discrepancies, or major problems. Assist conducting pre-final inspections. Provide advice for modification negotiations. NAVFAC's Electronic Construction and Facility Support Contract Management System (eCMS) shall be used to manage electronic submittals and documents. Prepare an independent construction cost estimate for modifications to construction contracts; prepare, for each modification cost estimate, a narrative assessment of the impact of the proposed change on the construction Contractor's operations. Provide Construction Photographic and Record Drawing Services. Perform Constructability Review Services; perform spot checks for completeness and accuracy of the construction plans and specifications and to determine the constructability of the facility at the beginning and duration of each Phase of Construction. Requests for Information (RFI) management. Qualifications and Skills: A minimum of seven (7) years of experience as a Construction Manager, Field Engineer, Project Engineer or Quality Control Manager on commercial/industrial type facilities, utility or waterfront related contracts valued in excess of $5 million. Construction technical competencies and qualifications to verify that a specific level of workmanship was obtained. Knowledge of construction scheduling methods and familiarity with the use of scheduling software, including but not limited to Primavera Suretrak/P3/P6 and Microsoft Project. Proficiency in using computer software programs such as Microsoft Word, Excel, PowerPoint, and Outlook; Adobe Acrobat Professional; and RS Means/CostWorks. Average agility and dexterity. CSET will be required to perform duties that involve moderate walking over rough, uneven, or slippery surfaces, recurring bending, crouching, stooping, stretching, climbing ladders, walking up and down several flights of stairs or similar activities, recurring lifting of moderately heavy objects less than 50 lbs. such as testing or measuring equipment, and regular visits to construction sites. Ability to communicate effectively, concisely, and authoritatively in English both orally and in writing. Experience in preparing correspondence, written reports, and in briefing management personnel. Experience in developing and maintaining complex, long term, multi-year program construction management activities including submittal and Request for Information (RFI) processing. Experience and familiarity with Federal building design criteria and construction guide specifications. Knowledge of construction practices and techniques, e.g., proper applications of construction materials and methods of installation. Ability to accurately calculate construction costs for changes, price the value of needed work, and provide recommendations for equitable adjustments. Ability to monitor the preparation of as-built activities of contractors to ensure that those documents are being prepared on an on-going basis. Ability to review contractor submissions of as-built drawings for completeness and accuracy and advise in writing the appropriate Government personnel as to the acceptability of such submissions. Ability to identify critical and long lead-time materials and recommend procurement strategies to prevent negative impact on quality, cost, and schedule. Completed 30 Hour OSHA Construction Training within the past 2 years. Must hold a certificate in USACE Construction Quality Management (CQM) for Contractors Training (maintain valid 5-year certificate) or obtain certification within 60 days of onboarding U.S. Citizen A valid driver's license Benefits Excellent salary and benefits package to include paid time off, paid holidays, comprehensive health insurance plan including medical, dental, vision, life insurance, long-term disability insurance; 401(k) plan with employer match.

Bristol Infrastructure Design Services, LLC is hiring multiple Construction Surveillance Engineering Technicians in several locations nationwide. The Construction Surveillance Engineering Technician (CSET) will provide technical services and expertise related to all phases of construction on a variety of projects within the area of responsibility. The position will support the client's Resident Officer in Charge of Construction (ROICC), or designee, for construction services such as construction inspection, quality assurance, monitoring safety and environmental compliance and contract administration. Major Responsibilities Specific tasks for the CSET include but are not limited to the following: Coordinate Requests from Construction Contractor. Coordinate request from the construction Contractor for outage requests, excavation permits, burn permits, haul routes and other similar items. This will require liaison with the ROICC and appropriate base personnel (Security, Public Works, Fire Department etc.) Coordinate field activities. CSET shall work with the construction contractor, Navy client customers, activity managers, maintenance and utility servers, Federal Fire departments, and Security Police so there is a seamless coordination of construction activities. Attend Meetings (Pre-Construction, Safety, Contractor Quality Control, Partnering Meetings, and others) and Conferences - The CSET shall take notes, provide information to the ROICC or the ROICC's representative at the following meetings, conferences, and briefings. Develop Quality Assurance Plans. Prepare Construction Representatives Reports (CCRs) The CSET shall assure that the quality control system of the Contractor is in compliance with contract documents and applicable documents. Prepare draft Contract Construction Compliance Notices (CCCNs) in cases where the CSET observed workmanship and/or materials not in compliance with construction contract documents/specifications or safety infractions. The CSET shall take and provide the ROICC complete progress, record, special construction, and completion photographs. Maintain Working Files. NAVFAC's Electronic Construction and Facility Support Contract Management System (eCMS) shall be used to manage electronic submittals and documents. Minimum Education/Experience A minimum of five (5) years of experience as a Quality Control Manager or Superintendent working for a General Contractor on NAVFAC or USACE projects, OR a minimum of ten (10) years of experience working as a Foreman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete on commercial/industrial/military projects valued in excess of $5 million. A minimum of five (5) years of experience working as a Journeyman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete. Residential experience does not qualify. Required Knowledge or Skills Specialized training for Construction Quality Verification or completed an equivalent course. Competent computer skills for network data entry. Proficiency in using computer software programs such as Microsoft Word, Excel, and Outlook, as well as Adobe Acrobat Professional. Ability to communicate in English effectively orally and in writing. Experience in maintaining official construction site records. Experience in conducting meetings to resolve problems on construction projects and briefing clients and management personnel. In depth knowledge of construction practices and workmanship, including experience in proper uses of construction materials and installation methods In depth experience interpreting construction drawings and specifications on construction projects. Experience in making materials take-offs for construction work. Ability and experience in the inspection of materials, workmanship and construction and installation of various systems within the inspector's area of expertise. Knowledge of safety practices in the construction industry, including a background of familiarity with USACE (EM-385-1-1) and OSHA safety requirements. Completed the 30 Hour OSHA Construction Training within the past 2 years. Must hold a certificate in USACE Construction Quality Management (CQM) for Contractors Training (maintain valid 5-year certificate) or obtain certification within 60 days of onboarding. U.S. Citizen. A valid driver's license. Physical Demands Average agility and dexterity. CSET will be required to perform duties that involve moderate walking over rough, uneven or slippery surfaces, recurring bending, crouching, stooping, stretching, climbing ladders, walking up and down several flights of stairs or similar activities, recurring lifting of moderately heavy objects less than 50 lbs. such as testing or measuring equipment, and regular visits to construction sites. Required to have close visual acuity to perform activities such as viewing a computer terminal and extensive reading. Specific physical requirements include, but are not limited to, climbing, balancing, stooping, kneeling, reaching, walking, lifting, grasping, feeling, talking, hearing and performing repetitive motions. The worker is subject to both inside and outside environmental conditions, noise sufficient to cause the worker to shout. The worker is subject to a variety of physical conditions - proximity to moving mechanical parts, moving vehicles, electric current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. The worker may be required to wear a respirator. The worker may be frequently in close quarters, crawl spaces, shafts, manholes, small-enclosed rooms, small sewage and water line pipes, and other areas that could cause claustrophobia. The worker is subject to atmospheric conditions - fumes, odors, dusts, mist, gases or poor ventilation. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Bristol Infrastructure Design Services, LLC is hiring a Construction Surveillance Engineering Technician (CSET) to support NAVFAC SE at Naval Air Station Pensacola, Florida. The Construction Surveillance Engineering Technician (CSET) will provide technical services and expertise related to all phases of construction on a variety of projects within the area of responsibility. The position will support the client's Resident Officer in Charge of Construction (ROICC), or designee, for construction services such as construction inspection, quality assurance, monitoring safety and environmental compliance and contract administration. Major Responsibilities Specific tasks for the CSET include but are not limited to the following: Coordinate Requests from Construction Contractor. Coordinate request from the construction Contractor for outage requests, excavation permits, burn permits, haul routes and other similar items. This will require liaison with the ROICC and appropriate base personnel (Security, Public Works, Fire Department etc.) Coordinate field activities. CSET shall work with the construction contractor, Navy client customers, activity managers, maintenance and utility servers, Federal Fire departments, and Security Police so there is a seamless coordination of construction activities. Attend Meetings (Pre-Construction, Safety, Contractor Quality Control, Partnering Meetings, and others) and Conferences - The CSET shall take notes, provide information to the ROICC or the ROICC's representative at the following meetings, conferences, and briefings. Develop Quality Assurance Plans. Prepare Construction Representatives Reports (CCRs) The CSET shall assure that the quality control system of the Contractor is in compliance with contract documents and applicable documents. Prepare draft Contract Construction Compliance Notices (CCCNs) in cases where the CSET observed workmanship and/or materials not in compliance with construction contract documents/specifications or safety infractions. The CSET shall take and provide the ROICC complete progress, record, special construction, and completion photographs. Maintain Working Files. NAVFAC's Electronic Construction and Facility Support Contract Management System (eCMS) shall be used to manage electronic submittals and documents. Minimum Education/Experience A minimum of five (5) years of experience as a Quality Control Manager or Superintendent working for a General Contractor on NAVFAC or USACE projects, OR a minimum of ten (10) years of experience working as a Foreman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete on projects valued in excess of $5 million. A minimum of five (5) years of experience working as a Journeyman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete. Residential experience does not qualify. Required Knowledge or Skills Must hold a certificate in USACE Construction Quality Management (CQM) for Contractors Training or obtain certification within 60 days of onboarding. Competent computer skills for network data entry. Proficiency in using computer software programs such as Microsoft Word, Excel, and Outlook, as well as Adobe Acrobat Professional. Ability to communicate in English effectively orally and in writing. Experience in maintaining official construction site records. Experience in conducting meetings to resolve problems on construction projects and briefing clients and management personnel. In depth knowledge of construction practices and workmanship, including experience in proper uses of construction materials and installation methods In depth experience interpreting construction drawings and specifications on construction projects. Experience in making materials take-offs for construction work. Ability and experience in the inspection of materials, workmanship and construction and installation of various systems within the inspector's area of expertise. Knowledge of safety practices in the construction industry, including a background of familiarity with USACE (EM-385-1-1) and OSHA safety requirements. Completed the 30 Hour OSHA Construction Training within the past 2 years. U.S. Citizen. A valid driver's license. Physical Demands Average agility and dexterity. CSET will be required to perform duties that involve moderate walking over rough, uneven or slippery surfaces, recurring bending, crouching, stooping, stretching, climbing ladders, walking up and down several flights of stairs or similar activities, recurring lifting of moderately heavy objects less than 50 lbs. such as testing or measuring equipment, and regular visits to construction sites. Required to have close visual acuity to perform activities such as viewing a computer terminal and extensive reading. Specific physical requirements include, but are not limited to, climbing, balancing, stooping, kneeling, reaching, walking, lifting, grasping, feeling, talking, hearing and performing repetitive motions. The worker is subject to both inside and outside environmental conditions, noise sufficient to cause the worker to shout. The worker is subject to a variety of physical conditions - proximity to moving mechanical parts, moving vehicles, electric current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. The worker is subject to atmospheric conditions - fumes, odors, dusts, mist, gases or poor ventilation. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Peckham Industries Pay Range: $22.00 - $22.00 Salary Interval: Intern Description: Application Instructions About Us: Family by Choice Dailey Precast, LLC, a subsidiary of Peckham Industries, Inc., specializes in the design and manufacturing of quality precast/prestressed concrete products. Our projects include parking structures, building exteriors, bridges, sports stadiums and retaining walls throughout Metro New York/New Jersey, Upstate New York, and New England. Dailey Precast utilizes the very latest technologies. Dailey Precast Capabilities and Projects Video Dailey Precast, LLC has many offerings - come work with a dynamic company with tremendous opportunities for personal and financial growth! We are looking for someone who is excited to learn about the Precast industry through training, feedback, and hands-on experience: Working at Dailey Precast Video Position Description Job Summary: The Quality Engineer Intern will support continuous improvement across our Quality Control, Engineering, and Production Operations teams by analyzing quality data, investigating nonconformances, and helping implement solutions that enhance product quality and production efficiency. This role provides hands-on exposure to modern precast manufacturing, data-driven quality systems, and advanced inspection technologies, and offers the opportunity to be considered for future internships or full-time employment. In addition, the QE intern will also contribute to a special inspection-automation project involving a computer vision-based system that compares completed precast components to digital models for placement verification and quality assurance. Essential Functions: Results matter. Analyze quality data, defect trends, rework reports, and error-rate metrics to identify high-impact improvement opportunities. Mastery. Support root-cause investigations and contribute to effective corrective and preventive action plans that strengthen process consistency and quality outcomes. Respect and engage. Collaborate with QC inspectors, production teams, and engineers to troubleshoot dimensional, embed, and finish-related issues, enabling faster resolution and improved production flow. Measurement. Assist in developing quality KPIs, dashboards, and standardized inspection workflows that increase visibility into performance and promote data-driven decision-making. Contribute to the creation and refinement of SOPs, inspection checklists, and digital documentation tools to support standardization and continuous improvement across quality processes. Committed to serve. Participate in planning, testing, and validating an automated visual inspection system using imaging and model-comparison technology to advance accuracy and efficiency in component verification. Determined. Support continuous improvement initiatives focused on efficiency, safety, and cost reduction, helping drive operational excellence throughout the facility. Safety always wins. Engage in plant safety activities and assist with job hazard analysis development to promote a safe working environment and ensure compliance with safety standards. Dedication. Maintain detailed and organized project documentation and technical reports that support transparency, knowledge sharing, and effective decision-making. Position Requirements Requirements, Education and Experience: Currently enrolled in or recently graduated from an accredited college or university with a major in Concrete Industry Management (CIM), Construction Management, Civil, Industrial, or Mechanical Engineering, Architectural Technology, or other related field. Successful submission of our online application by Monday, May 11, 2026, and: A cover letter or paragraph stating your major and what intrigues you about it. A resume including your LinkedIn profile, if you have one. One written recommendation (e-mail ok) from a current or previous employer, teacher, or professor Excellent analytical and problem-solving skills. Attention to detail and a commitment to quality. Strong communication skills and ability to work cross-functionally Demonstrated strong work ethic and a genuine interest in manufacturing, quality systems, and process improvement. Proficiency in working with data, spreadsheets, and technical documentation Ability to adhere to safety protocols across the manufacturing plant, office, and field environments Willingness to spend time in both office and production environments A valid driver's license and reliable transportation. Legal right to work in the U.S. Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Travel: Position may require up to 5% travel by personal vehicle to job sites and offices throughout the state of Vermont, New York, New Jersey, and Massachusetts based on the needs of the business. Work Environment/Physical Demands: This job operates in an office and professional environment, as well as a manufacturing plant and construction environment. This role routinely uses office equipment such as computers, phones, photocopiers. This position also works on or near moving mechanical parts and loud equipment. Requires the ability to sit or stand for long periods of time as well as lifting, pulling, bending, kneeling, squatting, climbing, walking, reaching, driving, and repetitive motion. Values: At Peckham, you will experience our values wherever you work: corporate offices, plants, quarries, or paving operations. We share a common set of values - safety, integrity, dedication, and efficiency which are embedded in how we show up every day. Ours is a culture where we protect family and friends, our word is our bond, we are committed to serve and results matter. Our values are the foundation of our growth, and we believe will pave the way for future success. Equal Opportunity Employer Peckham Industries, Inc. (PII) is an Equal Employment Opportunity (EEO) and Affirmative Action employer. It is our policy to provide EEO to all persons regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, creed, gender, sex, sexual orientation, gender identity and/or expression, genetic information, marital status, status with regard to public assistance, veteran status, pregnancy or pregnancy-related condition, or any other characteristic protected by federal, state or local law. Under the Americans with Disabilities Act or similar law, if you have a disability and you wish to discuss potential accommodations related to applying for employment at Peckham, please contact ***********************. Compensation details: 22-22 Hourly Wage PI2709d0079d63-26***********4

Job Description Why This is a Great Opportunity If you have experience repairing and building complex machines, engines, or complete systems and want to advance your career, look no further! As a Matec Electro-mechanical Technician, you will be challenged to continually develop your skills by working on our custom, non-destructive testing systems with some of the most highly skilled technicians in the industry to guide and mentor you. The successful Electro-mechanical Technician should be comfortable in a manufacturing environment, have an eye for precision, and enjoy working as part of a team to build our complex, multi-faceted systems. Apply now if this sounds like you! Why Matec Matec Instrument Companies employees are a dedicated team motivated and inspired by solving complex problems and building state-of-the-art machines and systems to test materials for industries including aerospace and railroad. We collaborate with some of the world's largest manufacturers to help them achieve the highest levels of safety and quality. If you want to be part of something great, this could be exactly what you are looking for! Check us out here: ************** Responsibilities of Electro-Mechanical Technician: Responsible for assembling fabricated and purchased parts using assembly drawings and parts lists provided by engineering. High complexity mechanical assembly that requires fitting, alignment, and adjustment to very close tolerances. Mechanical alterations and additions during debug. Work with mechanical and controls engineers to make the machine work properly. Perform various non-repetitive mechanical assembly functions using hand or power tools. Build machines and sub-assemblies to design requirements and customer specifications. Read and interpret schematics. Ability to use test equipment to perform functional testing. Record appropriate documentation and test data. Build and wire mechanical fixtures, transducer mounts, immersion tanks, and linear rail systems Qualifications: Automation Machine Build Assembly experience strongly desired. Strong maintenance/mechanical background Must be versatile in and around a manufacturing environment. Knowledge of machine tool assembly, use of typical machine shop equipment like mills, lathes, grinders and hand tools Previous experience with mechanical assembly and maintenance in the automation industry. Ability to read and interpret assembly drawings and electrical schematics/wiring diagrams. Travel required up to 30% The Benefits & Perks Health Insurance w/HSA and company contribution 401k with an automatic 3% company contribution Flexible Spending Overtime 10 Holiday's 13 days PTO STD & LTD Insurance Tuition Assistance If you understand what it takes to make custom machines work and are driven to exceed customer expectations, then we want to hear from you! PM21 Powered by JazzHR 8Efy9uTmP9

Bristol Infrastructure Design Services, LLC is hiring multiple Construction Surveillance Engineering Technicians in several locations nationwide. The Construction Surveillance Engineering Technician (CSET) will provide technical services and expertise related to all phases of construction on a variety of projects within the area of responsibility. The position will support the client's Resident Officer in Charge of Construction (ROICC), or designee, for construction services such as construction inspection, quality assurance, monitoring safety and environmental compliance and contract administration. Major Responsibilities Specific tasks for the CSET include but are not limited to the following: Coordinate Requests from Construction Contractor. Coordinate request from the construction Contractor for outage requests, excavation permits, burn permits, haul routes and other similar items. This will require liaison with the ROICC and appropriate base personnel (Security, Public Works, Fire Department etc.) Coordinate field activities. CSET shall work with the construction contractor, Navy client customers, activity managers, maintenance and utility servers, Federal Fire departments, and Security Police so there is a seamless coordination of construction activities. Attend Meetings (Pre-Construction, Safety, Contractor Quality Control, Partnering Meetings, and others) and Conferences - The CSET shall take notes, provide information to the ROICC or the ROICC's representative at the following meetings, conferences, and briefings. Develop Quality Assurance Plans. Prepare Construction Representatives Reports (CCRs) The CSET shall assure that the quality control system of the Contractor is in compliance with contract documents and applicable documents. Prepare draft Contract Construction Compliance Notices (CCCNs) in cases where the CSET observed workmanship and/or materials not in compliance with construction contract documents/specifications or safety infractions. The CSET shall take and provide the ROICC complete progress, record, special construction, and completion photographs. Maintain Working Files. NAVFAC's Electronic Construction and Facility Support Contract Management System (eCMS) shall be used to manage electronic submittals and documents. Minimum Education/Experience A minimum of five (5) years of experience as a Quality Control Manager or Superintendent working for a General Contractor on NAVFAC or USACE projects, OR a minimum of ten (10) years of experience working as a Foreman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete on commercial/industrial/military projects valued in excess of $5 million. A minimum of five (5) years of experience working as a Journeyman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete. Residential experience does not qualify. Required Knowledge or Skills Specialized training for Construction Quality Verification or completed an equivalent course. Competent computer skills for network data entry. Proficiency in using computer software programs such as Microsoft Word, Excel, and Outlook, as well as Adobe Acrobat Professional. Ability to communicate in English effectively orally and in writing. Experience in maintaining official construction site records. Experience in conducting meetings to resolve problems on construction projects and briefing clients and management personnel. In depth knowledge of construction practices and workmanship, including experience in proper uses of construction materials and installation methods In depth experience interpreting construction drawings and specifications on construction projects. Experience in making materials take-offs for construction work. Ability and experience in the inspection of materials, workmanship and construction and installation of various systems within the inspector's area of expertise. Knowledge of safety practices in the construction industry, including a background of familiarity with USACE (EM-385-1-1) and OSHA safety requirements. Completed the 30 Hour OSHA Construction Training within the past 2 years. Must hold a certificate in USACE Construction Quality Management (CQM) for Contractors Training (maintain valid 5-year certificate) or obtain certification within 60 days of onboarding. U.S. Citizen. A valid driver's license. Physical Demands Average agility and dexterity. CSET will be required to perform duties that involve moderate walking over rough, uneven or slippery surfaces, recurring bending, crouching, stooping, stretching, climbing ladders, walking up and down several flights of stairs or similar activities, recurring lifting of moderately heavy objects less than 50 lbs. such as testing or measuring equipment, and regular visits to construction sites. Required to have close visual acuity to perform activities such as viewing a computer terminal and extensive reading. Specific physical requirements include, but are not limited to, climbing, balancing, stooping, kneeling, reaching, walking, lifting, grasping, feeling, talking, hearing and performing repetitive motions. The worker is subject to both inside and outside environmental conditions, noise sufficient to cause the worker to shout. The worker is subject to a variety of physical conditions - proximity to moving mechanical parts, moving vehicles, electric current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. The worker may be required to wear a respirator. The worker may be frequently in close quarters, crawl spaces, shafts, manholes, small-enclosed rooms, small sewage and water line pipes, and other areas that could cause claustrophobia. The worker is subject to atmospheric conditions - fumes, odors, dusts, mist, gases or poor ventilation. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Bristol Infrastructure Design Services, LLC is hiring a Construction Surveillance Engineering Technician to Support the Department of Navy at Kings Bay Naval Base. The Construction Surveillance Engineering Technician (CSET) will provide technical services and expertise related to all phases of construction on a variety of projects within the area of responsibility. The position will support the client's Resident Officer in Charge of Construction (ROICC), or designee, for construction services such as construction inspection, quality assurance, monitoring safety and environmental compliance and contract administration. Major Responsibilities Specific tasks for the CSET include but are not limited to the following: Coordinate Requests from Construction Contractor. Coordinate request from the construction Contractor for outage requests, excavation permits, burn permits, haul routes and other similar items. This will require liaison with the ROICC and appropriate base personnel (Security, Public Works, Fire Department etc.) Coordinate field activities. CSET shall work with the construction contractor, Navy client customers, activity managers, maintenance and utility servers, Federal Fire departments, and Security Police so there is a seamless coordination of construction activities. Attend Meetings (Pre-Construction, Safety, Contractor Quality Control, Partnering Meetings, and others) and Conferences - The CSET shall take notes, provide information to the ROICC or the ROICC's representative at the following meetings, conferences, and briefings. Develop Quality Assurance Plans. Prepare Construction Representatives Reports (CCRs) The CSET shall assure that the quality control system of the Contractor is in compliance with contract documents and applicable documents. Prepare draft Contract Construction Compliance Notices (CCCNs) in cases where the CSET observed workmanship and/or materials not in compliance with construction contract documents/specifications or safety infractions. The CSET shall take and provide the ROICC complete progress, record, special construction, and completion photographs. Maintain Working Files. NAVFAC's Electronic Construction and Facility Support Contract Management System (eCMS) shall be used to manage electronic submittals and documents. Minimum Education/Experience A minimum of five (5) years of experience as a Quality Control Manager or Superintendent working for a General Contractor on NAVFAC or USACE projects, OR a minimum of ten (10) years of experience working as a Foreman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete on commercial/industrial/military projects valued in excess of $5 million. A minimum of five (5) years of experience working as a Journeyman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete. Residential experience does not qualify. Required Knowledge or Skills Specialized training for Construction Quality Verification or completed an equivalent course. Competent computer skills for network data entry. Proficiency in using computer software programs such as Microsoft Word, Excel, and Outlook, as well as Adobe Acrobat Professional. Ability to communicate in English effectively orally and in writing. Experience in maintaining official construction site records. Experience in conducting meetings to resolve problems on construction projects and briefing clients and management personnel. In depth knowledge of construction practices and workmanship, including experience in proper uses of construction materials and installation methods In depth experience interpreting construction drawings and specifications on construction projects. Experience in making materials take-offs for construction work. Ability and experience in the inspection of materials, workmanship and construction and installation of various systems within the inspector's area of expertise. Knowledge of safety practices in the construction industry, including a background of familiarity with USACE (EM-385-1-1) and OSHA safety requirements. Completed the 30 Hour OSHA Construction Training within the past 2 years. Must hold a certificate in USACE Construction Quality Management (CQM) for Contractors Training (maintain valid 5-year certificate) or obtain certification within 60 days of onboarding. U.S. Citizen. A valid driver's license. Physical Demands CSET will be required to perform duties that involve moderate walking over rough, uneven or slippery surfaces, recurring bending, crouching, stooping, stretching, climbing ladders, walking up and down several flights of stairs or similar activities, recurring lifting of moderately heavy objects less than 50 lbs. such as testing or measuring equipment, and regular visits to construction sites. Required to have close visual acuity to perform activities such as viewing a computer terminal and extensive reading. Specific physical requirements include, but are not limited to, climbing, balancing, stooping, kneeling, reaching, walking, lifting, grasping, feeling, talking, hearing and performing repetitive motions. The worker is subject to both inside and outside environmental conditions, noise sufficient to cause the worker to shout. The worker is subject to a variety of physical conditions - proximity to moving mechanical parts, moving vehicles, electric current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. The worker may be frequently in close quarters, crawl spaces, shafts, manholes, small-enclosed rooms, small sewage and water line pipes, and other areas that could cause claustrophobia. The worker is subject to atmospheric conditions - fumes, odors, dusts, mist, gases or poor ventilation. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Benefits Excellent salary and benefits package to include paid time off, paid holidays, comprehensive health insurance plan including medical, dental, vision, life insurance, long-term disability insurance, 401(k) plan with employer match. Contingency Continued employment is contingent upon passing security clearance, drug screen, and background check.

Bristol Infrastructure Design Services, LLC is seeking a Construction Surveillance Engineering Technician (CSET) to support NAVFAC SE at Barksdale AFB, LA. The Construction Surveillance Engineering Technician (CSET) will provide technical services and expertise related to all phases of construction on a variety of projects within the area of responsibility. The position will support the client's Resident Officer in Charge of Construction (ROICC), or designee, for construction services such as construction inspection, quality assurance, monitoring safety and environmental compliance and contract administration. Major Responsibilities Specific tasks for the CSET include but are not limited to the following: Coordinate Requests from Construction Contractor. Coordinate request from the construction Contractor for outage requests, excavation permits, burn permits, haul routes and other similar items. This will require liaison with the ROICC and appropriate base personnel (Security, Public Works, Fire Department etc.) Coordinate field activities. CSET shall work with the construction contractor, Navy client customers, activity managers, maintenance and utility servers, Federal Fire departments, and Security Police so there is a seamless coordination of construction activities. Attend Meetings (Pre-Construction, Safety, Contractor Quality Control, Partnering Meetings, and others) and Conferences - The CSET shall take notes, provide information to the ROICC or the ROICC's representative at the following meetings, conferences, and briefings. Develop Quality Assurance Plans. Prepare Construction Representatives Reports (CCRs) The CSET shall assure that the quality control system of the Contractor is in compliance with contract documents and applicable documents. Prepare draft Contract Construction Compliance Notices (CCCNs) in cases where the CSET observed workmanship and/or materials not in compliance with construction contract documents/specifications or safety infractions. The CSET shall take and provide the ROICC complete progress, record, special construction, and completion photographs. Maintain Working Files. NAVFAC's Electronic Construction and Facility Support Contract Management System (eCMS) shall be used to manage electronic submittals and documents. Minimum Education/Experience A minimum of five (5) years of experience as a Quality Control Manager or Superintendent working for a General Contractor on NAVFAC or USACE projects, OR a minimum of ten (10) years of experience working as a Foreman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete on commercial/industrial/military projects valued in excess of $5 million. A minimum of five (5) years of experience working as a Journeyman in one or more of the following trades: carpentry, electrical, roofing, HVAC, plumbing, or concrete. Residential experience does not qualify. Required Knowledge or Skills Specialized training for Construction Quality Verification or completed an equivalent course. Competent computer skills for network data entry. Proficiency in using computer software programs such as Microsoft Word, Excel, and Outlook, as well as Adobe Acrobat Professional. Ability to communicate in English effectively orally and in writing. Experience in maintaining official construction site records. Experience in conducting meetings to resolve problems on construction projects and briefing clients and management personnel. In depth knowledge of construction practices and workmanship, including experience in proper uses of construction materials and installation methods In depth experience interpreting construction drawings and specifications on construction projects. Experience in making materials take-offs for construction work. Ability and experience in the inspection of materials, workmanship and construction and installation of various systems within the inspector's area of expertise. Knowledge of safety practices in the construction industry, including a background of familiarity with USACE (EM-385-1-1) and OSHA safety requirements. Completed the 30 Hour OSHA Construction Training within the past 2 years. Must hold a certificate in USACE Construction Quality Management (CQM) for Contractors Training (maintain valid 5-year certificate) or obtain certification within 60 days of onboarding. U.S. Citizen. A valid driver's license. Physical Demands Average agility and dexterity. CSET will be required to perform duties that involve moderate walking over rough, uneven or slippery surfaces, recurring bending, crouching, stooping, stretching, climbing ladders, walking up and down several flights of stairs or similar activities, recurring lifting of moderately heavy objects less than 50 lbs. such as testing or measuring equipment, and regular visits to construction sites. Required to have close visual acuity to perform activities such as viewing a computer terminal and extensive reading. Specific physical requirements include, but are not limited to, climbing, balancing, stooping, kneeling, reaching, walking, lifting, grasping, feeling, talking, hearing and performing repetitive motions. The worker is subject to both inside and outside environmental conditions, noise sufficient to cause the worker to shout. The worker is subject to a variety of physical conditions - proximity to moving mechanical parts, moving vehicles, electric current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. The worker may be required to wear a respirator. The worker may be frequently in close quarters, crawl spaces, shafts, manholes, small-enclosed rooms, small sewage and water line pipes, and other areas that could cause claustrophobia. The worker is subject to atmospheric conditions - fumes, odors, dusts, mist, gases or poor ventilation. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.