NDT Technician jobs at Olsson - 1771 jobs

Bonitz, Inc., an Employee-Owned Company, is seeking a commercial floor care field technician. This position is responsible for providing professional level floor care maintenance to our commercial. Duties include but are not limited to: maintaining carpet, and resilient floors, cleaning of equipment, and bringing value to the customers to upkeep the life of the floor. Overview: Founded in 1954, Bonitz, Inc. is an Employee-Owned Company operating as specialty trade commercial contractors servicing the construction industry. Bonitz designs and installs custom flooring, walls, ceilings, and cladding systems. We offer access, terrazzo and other specialty flooring as well as floor care. We are committed to providing best in class project consulting, project management, and craftsmanship while delivering superior service and practical solutions. Bonitz has divisions in SC, NC, GA, TN, VA, LA, and FL. Position Essential Duties: Ability to speak with and interact with subcontractors and field associates. Deliver superior service to all customers, going above and beyond expectations Attend organizational needs regarding occasional meetings Prioritize to meet all deadlines, and timeframes internally and for customers Clean and return all equipment to "inspection ready" on a daily basis Notate and bring awareness of any issues discovered while on job Ability to follow instructions and verbal direction Education/Experience and Ideal Candidate Qualifications: High School Graduate or General Education Degree (GED) Ability to figure things out with little to no direction, self-starter Must be able to multi-task, good time management skills Attention to detail, prioritize and organize workflow Strong written and verbal communication Bilingual in Spanish is a plus 3+ years' experience as a floor technician preferred. Willing to train right applicants. Professional appearance and disposition Ability to work with initiative and independence, as well as team environment. Ability to work with people regardless of race, gender, religion, ancestry, national origin, sex, sexual orientation, age, disability, marital status, veteran status, medical condition or job type. Ability to identify and correct conditions that affect employee safety Must be able to work evenings and weekends. Ability to take care of customer needs while following company procedures. Safety Requirements: Ensure that all safety training and certifications are up to date or scheduled. Stay compliant with all Bonitz safety polices to ensure a safe and efficient workplace. Must be committed to working safely while accomplishing all tasks. Up to date knowledge of requirements for necessary equipment and training per job.

About Us Eric'sons Inc. is a leader in innovative trench drain solutions, dedicated to advancing automation technologies in our manufacturing processes. We are seeking a skilled Mechatronics Technician to join our Automation Team to support the development, maintenance, and improvement of our automated production line. Position Summary The Mechatronics Technician will be responsible for assembling, maintaining, troubleshooting, and improving automated systems that integrate mechanical, electrical, and control components. This is a hands-on role that combines practical shop-floor work with technical problem-solving. The ideal candidate will have strong mechanical aptitude, basic to intermediate electrical skills, and the ability to work collaboratively to keep equipment running at peak performance. Required Skills and Qualifications Strong mechanical aptitude with basic to intermediate electrical skills. Ability to read mechanical drawings and electrical schematics. Hands-on skills in assembly, basic fabrication, and mechanical repairs. Understanding of pneumatic systems and basic control systems. Proficient in the use of common hand tools, power tools, and measuring instruments. Good problem-solving skills and ability to work independently or as part of a team. Strong communication and organizational skills. Preferred Qualifications Experience in a manufacturing or industrial environment. Familiarity with PLCs and automation control systems (basic programming knowledge is a plus). Experience with preventive maintenance programs. Associate degree or technical certification in Mechatronics, Industrial Maintenance, or a related field.

```html About the Company NAES is seeking a Combustion Turbine Technician to support operations at a Simple Cycle combustion turbine facility in Neenah, Wisconsin. The Technician will be responsible for performing a wide range of duties related to the safe and reliable operation, inspection, and maintenance of combustion turbine systems, with an emphasis on electrical and instrumentation/control (I&C) systems. The ideal candidate will bring a strong electrical background and a collaborative, safety-first mindset to support power generation operations in compliance with regulatory and company standards. About the Role The Combustion Turbine Technician will support operations at a Simple Cycle combustion turbine facilities in Sheboygan & Neenah, Wisconsin. There are TWO DIRECT Hire Positions and relocation assistance is provided to the right candidate Responsibilities Operate and monitor combustion turbines and auxiliary equipment in accordance with safety and environmental regulations. Perform troubleshooting, repairs, and routine maintenance on electrical and I&C systems. Conduct inspections and preventative maintenance using Maximo or similar CMMS systems. Calibrate and maintain instrumentation, control systems, and performance monitoring equipment. Maintain accurate logs of plant operations, equipment conditions, and maintenance activities. Support water treatment operations, including chemical handling and system performance testing. Operate mobile and heavy equipment to assist with maintenance activities. Collaborate with internal teams and contractors during equipment installation and repairs. Perform light welding and mechanical repairs as needed. Participate in safety meetings, audits, and continuous improvement initiatives. Maintain plant cleanliness and adhere to all safety policies and procedures. Provide support to other generating facilities as required. Qualifications Associate Degree in Electrical, Mechanical, or Instrumentation & Control Technology required. 4+ years experience in electrical, mechanical, or I&C trades, OR 2+ years of experience in combustion turbine operations and maintenance. Completed apprenticeship in a related trade is a plus. Demonstrated up-to-date electrical or I&C field experience is required. Required Skills Strong background in electrical or instrumentation and control (I&C) systems. Familiarity with combustion turbine operation and maintenance. Ability to read and interpret blueprints, diagrams, and specifications. Demonstrated mechanical and/or electrical aptitude. High level of personal and technical responsibility. Ability to work independently or as part of a collaborative team. Valid driver's license required. Must reside within 60 minutes of the Neenah Generating facility per company policy. Preferred Skills Completed apprenticeship in a related trade is a plus. Pay range and compensation package Compensation details are not specified in the provided job description. Equal Opportunity Statement NAES is committed to diversity and inclusivity in the workplace. ```

What you'll do: * Inspect incoming and outgoing materials, the fit up of assemblies, parts, and welds throughout the manufacturing process * Inspect coatings (Galvanizing/Paint) prior to shipment * Perform magnetic particle inspection * Follow all safety rules and practices * Fill-in as needed so that production goals can be met * May be involved in safety committees or initiatives * Other duties as assigned What you'll need: * High School diploma or equivalent * Experience in steel fabrication/welding * Minimum of Level 2 MT Certification * Level 2 UT Certification preferred * CWI Certification strongly preferred

What you'll do: Inspect incoming and outgoing materials, the fit up of assemblies, parts, and welds throughout the manufacturing process Inspect coatings (Galvanizing/Paint) prior to shipment Perform magnetic particle inspection Follow all safety rules and practices Fill-in as needed so that production goals can be met May be involved in safety committees or initiatives Other duties as assigned What you'll need: High School diploma or equivalent Experience in steel fabrication/welding Minimum of Level 2 MT Certification Level 2 UT Certification preferred CWI Certification strongly preferred

Responsibilities ECS Limited is offering a unique opportunity for a talented Specialty Technician to join our Raleigh team and advance in a dynamic work environment. You'll work on a variety of projects of moderate complexity performing field observations and inspections, and may also work with steel performing destructive and non-destructive testing (NDT). Responsibilities * Field Activities: Perform observations, testing, inspections, and sampling of various construction materials, including soils, aggregates, concrete, grout, masonry, asphalt and structural steel placement; Execute tasks based on project requirements under the guidance of senior technicians, staff professionals, and project managers; Inspections may also be conducted in fabrication facilities or on mechanical piping systems and pressure vessels. * Testing Procedures: Conduct routine observations of structural steel and reinforcing steel, including welded or bolted connections using various methodologies and testing equipment following industry standards for documentation and compliance; Testing may include ground penetrating radar (GPR) structural surveys, material verification, and corrosion surveys. * Data Collection: Perform calculations and data reduction based on sampling, test results, and inspections; Engage in drafting and other administrative duties as required; Maintain organization of field equipment and notify supervisor of broken or missing equipment as applicable. * Communication: Maintain daily communication with site contractors, other technicians, and project managers, keeping the team informed of changing site conditions and requested additional testing; Attend project meetings as requested. * Training and Development: Receive training in ECS methodology for project observations, inspections, and testing; Document findings with precision in accordance with accepted engineering practices; Mentor other technicians as they grow in their careers. Career Development As your experience grows, ECS will: * Support you in enhancing your professional skills to advance and grow with us. * Encourage participation and advancement in internal and external training programs and certification opportunities. Qualifications Required Qualifications * 2+ years of related experience. * High School diploma or GED. * Must have and be willing to maintain at least 2 specialty certifications from industry authorities such as NRC, NICET, WACEL, ACI, IFC, AWS, ASNT, ASTM, and be willing to obtain advanced and additional certifications as needed, such as AWS CWI or Ultrasound Level II. * Position requires carrying 40 - 70 lbs multiple times a day or occasionally lifting 85 lbs to waist height. * Must have valid driver's license and insurance. * Must provide suitable transportation for use on job sites - Mileage will be reimbursed. * Strong communication skills (speaking, reading, and writing). * Sound working knowledge of destructive and non-destructive testing principles, applications, and testing standards. * Excellent understanding of heavy construction safety, practices, and procedures. * Ability to perform work at heights. * Ability to work effectively with clients, peers, and supervisors. * Proficiency with electronic devices such as phones, tablets, and laptops. * Functional ability to read and interpret engineering and construction plans. * Basic knowledge of MS Office. * If your focus is NDE testing, you should have the ability to calibrate NDE equipment. About Us ECS Group of Companies (ECS) was founded in 1988 with the goal to raise the standards of professional engineering consulting. Today, we are a leader in geotechnical, construction materials, environmental and facilities consulting services. We are employee-owned with more than 3,000 employees in 100+ offices and testing facilities coast to coast. ECS is currently ranked #66 in Engineering News-Record's Top 500 Design Firms (April 2025), #148 in Engineering News-Record's Top 200 Environmental Firms (October 2025) and #50 in Zweig Group's Hot Firm List (May 2025). For additional information about ECS, visit: ******************* ECS is an Equal Opportunity Employer. To learn more, click here.

Overview At UES, we're a team of more than 4,000 engineers, scientists, geologists, inspectors, technicians, and drillers united by a shared purpose-to make a meaningful impact in the communities we serve. As a national leader in geotechnical engineering, environmental consulting, and materials testing and inspection, we collaborate on transformative projects across transportation, energy, water, healthcare, and more. Learn more about the benefits of joining Team UES and our core values at careers.teamues.com. Position Overview We are seeking a skilled and safety-conscious NDT Technician to support engineering, environmental services, materials testing, and inspection projects. As a NDT Technician, you will perform advanced field and laboratory testing, conduct on-site inspections, and ensure construction, infrastructure, and environmental projects meet industry standards and regulatory requirements. This role requires strong problem-solving skills, technical expertise, and the ability to work independently in a fast-paced field environment. The ideal candidate is detail-oriented, technically proficient, and committed to maintaining a strong culture of safety. You will also enjoy working outdoors in dynamic environments, collaborating with a team to solve real-time challenges, and ensuring safety and quality compliance on every project. In addition to independent fieldwork, this position offers opportunities to potentially mentor junior technicians, sharing knowledge and best practices to enhance team performance and operational efficiency. To learn more about the important work our Field Technicians perform, here's a short video: UES Field Technician Responsibilities Identify structural and material steel/ welding defects using appropriate nondestructive testing methods. Interpret and analyze test results to determine material integrity and compliance with specifications. Prepare and complete detailed test reports, documenting procedures, results, and conclusions. Ensure that project welding and testing requirements are met and compliant with project specifications, requirements, and company policies or procedures. Complete detailed reports, logs, and documentation of test results, ensuring accuracy and timely submission to project managers and stakeholders. Communicate effectively with dispatch, field supervisors, contractors, and project managers, providing real-time updates on job status, site conditions, and any issues encountered. May be asked to mentor and support junior field technicians, providing guidance on field procedures, testing methods, and safety best practices. Follow all OSHA, company, and client safety protocols, ensuring strict adherence to personal protective equipment (PPE) usage, hazard awareness, and field safety guidelines. Adapt to changing project requirements and schedules, including early morning, weekend, or overnight work as needed. Operate and maintain assigned company vehicle, including scheduling routine maintenance and ensuring proper upkeep. Travel to job sites within the designated region, which may require periodic overnight stays based on project needs. Flexibility to work variable schedules, including early mornings, weekends, overtime, and potential overnight travel based on project demands; though work is typically within San Diego County or Southern California. Perform additional duties as assigned to support company initiatives and project success. Qualifications High school diploma or equivalent required; vocational training or coursework in construction, engineering, geology, or a related field preferred. 3+ years of field-based experience in materials testing, construction inspection, geotechnical fieldwork, or a related industry. Nondestructive Testing (NDT) Level II certification required. Industry certifications such as ACI Level 1 Concrete Testing preferred or ability to obtain within a specified time period. Valid driver's license with an acceptable driving record; ability to safely operate company vehicles. Commitment to safety and adherence to OSHA regulations, industry best practices, and company safety policies. Proficiency in Microsoft Office Suite (Word, Excel, Outlook) and Field Data Collection (FDC) software or similar industry tools. Mathematical skills sufficient to add, subtract, multiply, and divide into all units of measure using whole numbers, common fractions, and decimals. Ability to read, write, and interpret blueprints, procedures, manuals, technical documents, and reports related to drilling, safety, and project requirements. Strong problem-solving skills, attention to detail, and ability to work independently in a fast-paced environment. Strong time management, organizational, and problem-solving skills, with the ability to complete tasks efficiently and accurately. Attention to detail to ensure accurate sample collection, testing procedures, and documentation. Ability to work independently and collaboratively, demonstrating a strong work ethic and commitment to producing high quality results. Ability to perform physical tasks, including lifting and carrying equipment, standing for extended periods, and working in outdoor environments with varying weather conditions. Flexibility to work variable schedules, including early mornings, weekends, overtime, and potential overnight travel based on project demands. Travel Requirements ● This position requires extensive travel, approximately up to 70% of the time, in support of business objectives and client engagements. Travel may be both scheduled and on short notice, depending on project needs. Destinations typically include job sites, field locations, or regional offices, where work may be conducted in outdoor or operational environments. Adherence to all company safety protocols and use of PPE is required during travel and on-site work. Physical Demands & Work Environment This position primarily works in an outdoor work environment, regularly exposed to varying field conditions, including: Sites that may not be accessible by vehicle, requiring travel on foot through wetlands, swamps, grasslands, fields, and other uneven or rugged terrain with natural and man-made obstacles such as sand, brush, and debris. Moderate to loud noise levels, common in active construction and industrial environments. Exposure to environmental elements including dirt, dust, sun, heat, humidity, and adverse weather conditions. The physical requirements for this position may include and are not limited to: Ability to lift and/or carry 35 to 75 lbs. up to 75 feet, involving regular repetitive motion. Ability to stand, walk, drive, and operate equipment for extended periods. Frequent use of hands and arms for typing, handling tools, and operating equipment. Ability to bend, twist, reach, stoop, pull, kneel, climb, balance, lift, carry, and push as required for fieldwork and inspections. Ability to speak and hear effectively to communicate in noisy environments and with project teams. Ability to use your senses to see (including close, distant, and peripheral vison, depth vision, and ability to focus) smell, hear, touch (use hands to reach climb or balance, crouch, stoop, crawl, kneel and sit). EEO Statement UES is an Equal Opportunity Employer and is proud to recruit the most qualified candidates. Please see our full EEO Statement at the bottom of the page here Posted Salary Range Starting from USD $25.00/Hr. High school diploma or equivalent required; vocational training or coursework in construction, engineering, geology, or a related field preferred. 3+ years of field-based experience in materials testing, construction inspection, geotechnical fieldwork, or a related industry. Nondestructive Testing (NDT) Level II certification required. Industry certifications such as ACI Level 1 Concrete Testing preferred or ability to obtain within a specified time period. Valid driver's license with an acceptable driving record; ability to safely operate company vehicles. Commitment to safety and adherence to OSHA regulations, industry best practices, and company safety policies. Proficiency in Microsoft Office Suite (Word, Excel, Outlook) and Field Data Collection (FDC) software or similar industry tools. Mathematical skills sufficient to add, subtract, multiply, and divide into all units of measure using whole numbers, common fractions, and decimals. Ability to read, write, and interpret blueprints, procedures, manuals, technical documents, and reports related to drilling, safety, and project requirements. Strong problem-solving skills, attention to detail, and ability to work independently in a fast-paced environment. Strong time management, organizational, and problem-solving skills, with the ability to complete tasks efficiently and accurately. Attention to detail to ensure accurate sample collection, testing procedures, and documentation. Ability to work independently and collaboratively, demonstrating a strong work ethic and commitment to producing high quality results. Ability to perform physical tasks, including lifting and carrying equipment, standing for extended periods, and working in outdoor environments with varying weather conditions. Flexibility to work variable schedules, including early mornings, weekends, overtime, and potential overnight travel based on project demands. Identify structural and material steel/ welding defects using appropriate nondestructive testing methods. Interpret and analyze test results to determine material integrity and compliance with specifications. Prepare and complete detailed test reports, documenting procedures, results, and conclusions. Ensure that project welding and testing requirements are met and compliant with project specifications, requirements, and company policies or procedures. Complete detailed reports, logs, and documentation of test results, ensuring accuracy and timely submission to project managers and stakeholders. Communicate effectively with dispatch, field supervisors, contractors, and project managers, providing real-time updates on job status, site conditions, and any issues encountered. May be asked to mentor and support junior field technicians, providing guidance on field procedures, testing methods, and safety best practices. Follow all OSHA, company, and client safety protocols, ensuring strict adherence to personal protective equipment (PPE) usage, hazard awareness, and field safety guidelines. Adapt to changing project requirements and schedules, including early morning, weekend, or overnight work as needed. Operate and maintain assigned company vehicle, including scheduling routine maintenance and ensuring proper upkeep. Travel to job sites within the designated region, which may require periodic overnight stays based on project needs. Flexibility to work variable schedules, including early mornings, weekends, overtime, and potential overnight travel based on project demands; though work is typically within San Diego County or Southern California. Perform additional duties as assigned to support company initiatives and project success.

What you'll do: Requires knowledge of industry specific codes and standards. CWI-Certification Required. The inspector will be required to interpret and evaluate inspection results for welding fit-up and filler metal placement with respect to applicable codes, standards, and specifications, be able to set up and calibrate all testing equipment Use visual inspection techniques (VT) as well as Ultrasonic testing (UT) and Magnetic Particle Testing (MT) to perform non-destructive tests to identify errors or defects in product. Oversee welder qualification tests and evaluate welder performance. Accurately complete and maintain all required records. Follow all safety rules and practices. Perform other duties as assigned. Overtime is expected and required to meet production goals.

As a Production Technician, you will be an essential part of Fischer Homes' construction process as you produce and maintain construction documentation in a BIM environment. In this role, you will coordinate documents required for permit and construction ensuring that superintendents have materials, labor, and accurate plans to complete homes. The most rewarding aspect of this role is knowing that your accuracy and attention to detail bring someone's dream home to life. You will thrive in this role if you: Are extremely detail-oriented and seek to find errors in data to address. Enjoy working with Computer-Aided Design Technology. Have an analytical mindset and comfort working with data and facts. Approach your work with a customer-centered mindset. Strive to receive feedback and work consistently on growing your skillset. Prefer working within a structure and have a healthy respect for standards, processes, and guidelines. These skills will be used to: Produce plans and construct details accurately, timely, and within Fischer Homes standards. Deliver complete and accurate drawing set(s), and coordinate documents required for the building permit process to the Permit Department. Provide details of recurring issues and problems to appropriate departments to proactively solve future problems. Demonstrate creativity by finding new and/or better solutions, within Fischer Homes guidelines, to new or recurring problems. Preferred Qualifications Revit experience highly preferred Working knowledge of Excel and Data Analysis Physical demands and work environment: Must be able to use sensory skills (i.e. verbal communication) to effectively communicate and interact with other Associates and customers. Must be able to perform repetitive motions and use fine motor skills (i.e. typing, writing) to operate office supplies (i.e. computer, calculator, copier). Must be able to lift and carry approximately 20-25lbs unassisted. Must be able to sit for long periods of time with low periods of reaching and standing. The Value of a career with Fischer Homes Fischer Homes is one of the largest and most reputable home builders in the Midwestern and Southeastern states. Founded in 1980, the company has grown to build over 42,000 homes and employs over 750 Associates. Fischer Homes' solid reputation has been built largely by the talent of our Associates as we have been recognized as the 31st largest builder in the United States. We value diversity within the Fischer Homes organization and see each Associate as a team member and valuable asset. We select highly competent individuals to join our team, provide them with the resources, training, and development possible to make significant contributions and drive their success while determining their career paths. The rewards for their efforts are: Professional Development Training programs Tuition Reimbursement Competitive Compensation 401(k) with Company matching contributions and profit-sharing Employee Life Insurance Personal time off Inclusive Leave Fischer Homes holds the highest ethical standards of business. We are honest and straightforward and will stand by our word. Our actions demonstrate respect, courtesy, and above all, fairness.

As a Production Technician, you will be an essential part of Fischer Homes' construction process as you produce and maintain construction documentation in a BIM environment. In this role, you will coordinate documents required for permit and construction ensuring that superintendents have materials, labor, and accurate plans to complete homes. The most rewarding aspect of this role is knowing that your accuracy and attention to detail bring someone's dream home to life. You will thrive in this role if you: Are extremely detail-oriented and seek to find errors in data to address. Enjoy working with Computer-Aided Design Technology. Have an analytical mindset and comfort working with data and facts. Approach your work with a customer-centered mindset. Strive to receive feedback and work consistently on growing your skillset. Prefer working within a structure and have a healthy respect for standards, processes, and guidelines. These skills will be used to: Produce plans and construct details accurately, timely, and within Fischer Homes standards. Deliver complete and accurate drawing set(s), and coordinate documents required for the building permit process to the Permit Department. Provide details of recurring issues and problems to appropriate departments to proactively solve future problems. Demonstrate creativity by finding new and/or better solutions, within Fischer Homes guidelines, to new or recurring problems. Preferred Qualifications Revit experience highly preferred Working knowledge of Excel and Data Analysis Physical demands and work environment: Must be able to use sensory skills (i.e. verbal communication) to effectively communicate and interact with other Associates and customers. Must be able to perform repetitive motions and use fine motor skills (i.e. typing, writing) to operate office supplies (i.e. computer, calculator, copier). Must be able to lift and carry approximately 20-25lbs unassisted. Must be able to sit for long periods of time with low periods of reaching and standing. The Value of a career with Fischer Homes Fischer Homes is one of the largest and most reputable home builders in the Midwestern and Southeastern states. Founded in 1980, the company has grown to build over 42,000 homes and employs over 750 Associates. Fischer Homes' solid reputation has been built largely by the talent of our Associates as we have been recognized as the 31st largest builder in the United States. We value diversity within the Fischer Homes organization and see each Associate as a team member and valuable asset. We select highly competent individuals to join our team, provide them with the resources, training, and development possible to make significant contributions and drive their success while determining their career paths. The rewards for their efforts are: Professional Development Training programs Tuition Reimbursement Competitive Compensation 401(k) with Company matching contributions and profit-sharing Employee Life Insurance Personal time off Inclusive Leave Fischer Homes holds the highest ethical standards of business. We are honest and straightforward and will stand by our word. Our actions demonstrate respect, courtesy, and above all, fairness.

Every day, our team members do amazing things in pursuit of our shared purpose to build trust with our clients, partners, subcontractors, and teammates. No matter your background, education, or career path, if you share our vision to create extraordinary experiences, you belong at HITT. Production Technician Job Description: Formative 3D is a 3D-printing startup on a mission to change the built environment. By leveraging large-format and FDM additive manufacturing, we're building modular, component-based systems that are sustainable and scalable. As we launch our new production facility, we're looking for passionate and dependable, hands-on team members to help us produce our first project and grow the business. We're looking for a reliable and detail-oriented Production Technician to join our manufacturing team. In this role, you'll be responsible for the hands-on tasks that bring our 3D printed furniture to life. From post-processing and assembly to packaging and general shop support. If you enjoy working with your hands, take pride in craftsmanship, and want to be part of a team shaping the future of furniture, we'd love to meet you. Effective the beginning of March 2026, this role will transition from HITT to Formative 3D. Responsibilities * Perform post-processing of 3D printed parts, including hole drilling, sanding, and surface finishing, and post-processing. * Assemble modular furniture components per technical drawings and SOPs. * Package finished products securely and efficiently for shipping. * Assist with general labor tasks such as material handling, shop organization, and equipment upkeep. * Conduct quality checks to ensure parts meet visual and dimensional standards. * Maintain a clean, safe, and organized work environment. * Collaborate with team members to improve workflow and production efficiency. Qualifications * 1+ year of experience in a hands-on production, fabrication, or warehouse role * Comfortable using hand tools, power tools, and basic shop equipment * Strong attention to detail and commitment to quality * Ability to lift up to 50 lbs. and stand for extended periods * Self-motivated, dependable, and eager to learn * Experience with 3D printing (or desire to learn) or furniture assembly is a plus, but not required Physical Demands * Regular movement between production areas, assembly stations, and shipping/receiving * Standing/walking for extended periods while working, up to 8 hours per day, 6 days a week * Regular lifting of materials/equipment (25-50 lbs.) * Exposure to noise, dust, and varying temperatures typical of industrial environments * Use of PPE (safety glasses, gloves, hearing protection) as required. * Open to working weekends Compensation, Healthcare, & Benefits * Compensation commensurate based upon experience * Full suite of healthcare benefits, including medical, dental, and vision * Competitive PTO plans * Competitive retirement plans HITT Contracting is an equal opportunity employer. We are committed to hiring and developing the most qualified individuals based on job-related experience, skills, and merit. All employment decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. We value a respectful, inclusive workplace where everyone has the opportunity to succeed. HITT Contracting maintains a drug-free workplace, consistent with applicable local, state, and federal laws.

Temp Summary: Clear parts, inspects, assembles, disassembles and test transmissions Essential Duties and Responsibilities include the following. Other duties may be assigned Inspects and qualifies transmission parts using various measuring and test equipment Disassemble, clear and reassemble transmissions using tools, hand tools, semi-automated and fully-automated equipment Records various data in process via manual and electric methods Perform operators preventative maintenance or assigned equipment Clear and maintain orderly work area Recommends measure to improve production methods, equipment performance, and quality of product Responsible for adherence to the policies, procedures and instructions of the TS 16949 and ISO 14001 systems Physical Demands While performing the duties of this job, the employee is regularly required to stand for multiples hours at a time. The employee frequently is required to use hands to finger, handle, or feel objects, tools, or controls, and reach with hands and arms. The employee will frequently perform tasks requiring forceful repetitive grasping. The employee is occasionally required to walk for extended periods of time; bend, stop, kneel or crouch and talk or hear. The employee must frequently lift and or move up to 30 pounds. Specific vision abilities required by the job include close vision. Must be able to read and understand English's Work Environment While performing the duties of this job, the employee occasionally works near moving mechanical parts and is regular exposed to fumes or airborne particles. The noise level in the work environment is usably moderate.

Your Work Shapes the World at Caterpillar Inc. When you join Caterpillar, you're joining a global team who cares not just about the work we do - but also about each other. We are the makers, problem solvers, and future world builders who are creating stronger, more sustainable communities. We don't just talk about progress and innovation here - we make it happen, with our customers, where we work and live. Together, we are building a better world, so we can all enjoy living in it. At the Solar Turbines facility in Wamego, Kansas, we take pride in working together to safely build quality products for our customers to help them succeed. Possible Work Areas: * Fabrication - Running CNC plasma and oxy-fuel burn tables, operating overhead hoists, labeling and removing slag from parts. This position also branches into opportunities in flame bevel, Horizontal band saw and entry level machinist. * Paint - Including but not limited to prepping parts and units prior to painting such as shot blasting, power washing, greasing bores, installing ground engagement tools with various tools such as manual wrenches, impact and torque wrenches. As well as rigging various sizes of units using different lifting devices. Basic Qualifications: * Must be 18 years of age or older * Ability to lift up to 35 lbs * Occasionally required to stoop, kneel, crouch or crawl * Ability to work a regular schedule where daily attendance and punctuality are required * Ability to safely perform work accurately and thoroughly * Ability to stand for prolonged periods, performing repetitive work * Ability to produce quality work at a sustained pace * Demonstrates ability to follow directions and standard work Top candidate will have: * Fabrication, assembly, and/or paint experience Compensation & Benefits Starting pay range: $17.89 - 24.14 (additional 7% shift differential for second shift) Compensation and benefits may vary depending on multiple individualized factors, job level, market, location, job-related knowledge, skills, individual performance, and experience. Please note that salary is only one component of total compensation at Caterpillar. Benefits: Subject to plan eligibility, terms, and guidelines. This is a summary list of benefits. * Medical, dental, and vision benefits* * Paid time off plan (Vacation, Holidays, Volunteer, etc.)* * 401(k) savings plans* * Health Savings Account (HSA)* * Flexible Spending Accounts (FSAs)* * Health Lifestyle Programs* * Employee Assistance Program* * Voluntary Benefits and Employee Discounts* * Career Development* * Incentive bonus* * Disability benefits * Life Insurance * Parental leave * Adoption benefits * Tuition Reimbursement * These benefits also apply to part-time employees Additional Information: * Work location: Wamego, KS * Openings available on second shift. * Second Shift: - Monday - Thursday, 3:30pm- 2:00am * (*Overtime available based on business need) * Full Personal Protective Equipment provided Visa Sponsorship is not available for this position. This employer is not currently hiring foreign national applicants that require or will require sponsorship tied to a specific employer, such as, H, L, TN, F, J, E, O. As a global company, Caterpillar offers many job opportunities outside of the U.S which can be found through our employment website at **************************** Posting Dates: January 15, 2026 - January 29, 2026 Any offer of employment is conditioned upon the successful completion of a drug screen. Caterpillar is an Equal Opportunity Employer, Including Veterans and Individuals with Disabilities. Qualified applicants of any age are encouraged to apply. Not ready to apply? Join our Talent Community.

Arrow Electronics is currently seeking a dedicated and team-oriented Production Technician III to join our team in the assembly of computing products. The Production Technician III is responsible for performing builds of complex products in accordance with or without build plan, depending on availability. What You'll Be Doing: May build from customer specifications and engineering documents as needed. Install, configure, and perform complex troubleshooting of hardware, software, and components. Prepare product for assembly. Perform complex builds of computer products with or without build plan; test and performs complex troubleshooting with or without build plan; install, configure, and troubleshoot operating systems; install and configure network connections. Test product and software loads per build plan. Maintain product documentation. What We Are Looking For: Typically requires at least 5 years of experience. Job with prior relevant training or work experience. Acquires basic skills to perform routine tasks. Work is prescribed and completed with some autonomy. Has limited discretion to vary from established procedures. Works with either close supervision or under clearly defined procedures. What's In It For You: At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That's why we offer competitive financial compensation, including various compensation plans and a solid benefits package. Medical, Dental, Vision Insurance. 401k, With Matching Contributions. Paid Time Off (including sick, holiday, vacation, etc.). Health Savings Account (HSA)/Health Reimbursement Account (HRA) Options. Growth Opportunities. Tuition Reimbursement. Short-Term/Long-Term Disability Insurance. Climate controlled environment with excellent break room facilities. Growth Opportunities. And more! Work Arrangement: Fully Office Annual Hiring Range/Hourly Rate: $21.00 USD per hour Actual compensation offer to candidate may vary from posted hiring range based upon geographic location, work experience, education, and/or skill level. The pay ratio between base pay and target incentive (if applicable) will be finalized at offer. Apply today! #LI-ME1 Location:US-AZ-Phoenix, Arizona (East Sky Harbor Cir) Time Type:Full time Job Category:Supply Chain ServicesEEO Statement: Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. (Arrow EEO/AAP policy) We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application.

The Production Technician role is integral to the safe, reliable, and efficient operation of an Air Separation Gas Plant that supplies high-purity gases to a semiconductor manufacturing customer. This position encompasses responsibilities in the Control Room, field operations, and technical support at the Customer Use Point building. It plays a key part in maintaining uninterrupted gas supply and ensuring compliance with strict quality standards. Essential duties and responsibilities include the following. Other duties may be assigned. Control Room Operations: * Monitor, control, and optimize plant processes using Distributed Control Systems (DCS). * Track operating parameters, alarms, and plant performance to ensure safety and reliability. * Execute start-up, shutdown, and emergency procedures according to standard operating guidelines. On-Field Operations: * Perform routine rounds, inspections, and equipment checks on compressors, turbines, pumps, heat exchangers, and gas storage systems. * Conduct first-line troubleshooting, minor maintenance, and reporting of equipment issues. * Ensure compliance with plant safety standards, environmental permits, and operational policies. Customer Interface & Use Point Building Responsibilities: * Oversee and maintain gas delivery systems at the Customer Use Point, ensuring uninterrupted supply and adherence to purity specifications. * Perform quality checks, monitor gas analyzers, and promptly respond to deviations. * Collaborate with the customer's technical and production teams to address operational needs and resolve supply-related issues. Qualifications: Education & Technical Skill: * Technical diploma or degree in Process Technology, Mechanical, Electrical, or Chemical Engineering (or equivalent experience). * Prior experience in gas plants, petrochemical, chemical, or semiconductor industries preferred. * Familiarity with air separation technology, gas compression, and cryogenic systems. * Knowledge of control room systems (DCS/PLC) and plant instrumentation. * Strong troubleshooting and problem-solving skills in both control and field operations. Experience: Minimum 3 years of hands-on experience within industrial facilities. Working Conditions: * Industrial facility environment with potential exposure to high noise and cryogenic gases. * Requires use of PPE and strict compliance with safety standards. * Availability for on-call duty, overtime, and emergency response when required. About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** Benefits: Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-NB1

Interstates is currently seeking a Panel Shop Technician to join our Panel Shop Team in Sioux Center, IA. The Panel Shop Technician will be responsible for the fabrication of control system panels. Interstates seeks ambitious, innovative individuals with the ability to grow and maintain value-added relationships with our team and external customers. At Interstates, we offer competitive salary and fantastic benefits for you and your family. We place tremendous focus on training our employees while providing challenges and career development opportunities, so that each team member has the ability to reach their full potential. Responsibilities: * Assembling and constructing panels from layout to completion * Reading electrical diagrams and schematics * Other duties may be assigned Qualifications: * Electrical experience or background * 2+ years of fabrication experience preferred Preferred Skills: * Ability to lift between 50lbs occasionally * Excellent communication skills Work Environment: While performing the duties of this job, risk of electrical shock. The noise level in the work environment is usually moderate. Due to the nature of our work and our client base. Candidates should be comfortable working in these conditions and complying with safety standards to protect their well-being. Location & Travel: The position is located in Sioux Center, IA. Minimal travel is required. What we can offer: * Competitive WEEKLY Pay * Company Sponsored Holiday & Team Building Celebrations * Work/Life Balance (Average 45-50 hours/week) * Family-Like Culture - A team that cares about you as a whole person, not just what you do for work * Advancement Opportunities Benefits: * Health, Dental, Vision, and Life Insurance * Company-paid Short and long-term disability * Paid time off and Holidays * Matching 401k program * Pay for performance bonuses. * HSA contributions

Arrow Electronics is currently seeking a dedicated and team-oriented Production Technician to join our team in the assembly of computing products. In this role as a Production Technician I, you will be expected to demonstrate excellence in key areas, including safety, quality, precision, collaboration, and reliability. What You'll Be Doing: The Electronics Assembly Technician is responsible for performing low complexity builds of computing products in accordance with build plan. Installs system hardware and components. Prepare product for assembly; kit and package product. Perform builds of low complexity products according to build plan; install system hardware and components. Identify and process non-conforming material. Maintain product documentation; capture component and system serial numbers. Create and apply product labeling. Has limited prior relevant training or work experience. Contributes directly to specific unskilled tasks or processes. Has limited discretion to vary from established procedures. What You'll Need: Typically requires 2-5 years of experience. May require specific certifications. What We Are Looking For: Has limited prior relevant training or work experience. Contributes directly to specific unskilled tasks or processes. Has limited discretion to vary from established procedures. What's In It For You: At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That's why we offer competitive financial compensation, including various compensation plans and a solid benefits package. Medical, Dental, Vision Insurance. 401k, With Matching Contributions. Paid Time Off (including sick, holiday, vacation, etc.). Health Savings Account (HSA)/Health Reimbursement Account (HRA) Options. Growth Opportunities. Tuition Reimbursement. Short-Term/Long-Term Disability Insurance. Climate controlled environment with excellent break room facilities. Growth Opportunities. And more! Annual Hiring Range/Hourly Rate: $18.00 Actual compensation offer to candidate may vary from posted hiring range based upon geographic location, work experience, education, and/or skill level. The pay ratio between base pay and target incentive (if applicable) will be finalized at offer. Work Arrangement: Fully Office Mon - Thurs 6:00 am to 4:30 pm - Will need to be able to work overtime as needed. Apply today! #LI-ME1 Location:US-AZ-Phoenix, Arizona (East Sky Harbor Cir) Time Type:Full time Job Category:Supply Chain ServicesEEO Statement: Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. (Arrow EEO/AAP policy) We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application.

Arrow Electronics is currently seeking a dedicated and team-oriented Production Technician II to join our team in the assembly of computing products. The Production Technician II is responsible for performing moderately complex builds of computing products in accordance with build plan. Install and test system hardware, software and components. What You'll Be Doing: Prepare product for assembly. Performs builds of moderately complex products per build plan, including installing hardware and components, software loading, and system configuration. Performs large rack assembly and cabling. Test product and software loads per build plan. Identify and process non-conforming material. Perform basic system troubleshooting. Package, process and transfer product. What You'll Need: Ability to continually stand for long hours. Capability to regularly bend, twist, stoop, and reach. Ability to consistently handle, lift, and push product and equipment up to 50 lbs. Must be reliable and report consistently to your scheduled shift, including overtime hours. Comfortable working in a fast-paced environment with changing priorities . Attention to detail and ability to work within timeframes. Good communication skills. Reading, writing, and understanding of English language. Ability to follow written instructions. Basic computer literacy. Must be comfortable working under safety, quality, and productivity standards. What We Are Looking For: 1-3 years related assembly experience. Has limited prior relevant training or work experience. Contributes directly to specific unskilled tasks or processes. Has limited discretion to vary from established procedures. What's In It For You: At Arrow, we recognize that financial rewards and great benefits are important aspects of an ideal job. That's why we offer competitive financial compensation, including various compensation plans and a solid benefits package. Medical, Dental, Vision Insurance. 401k, With Matching Contributions. Paid Time Off (including sick, holiday, vacation, etc.). Health Savings Account (HSA)/Health Reimbursement Account (HRA) Options. Growth Opportunities. Tuition Reimbursement. Short-Term/Long-Term Disability Insurance. Climate controlled environment with excellent break room facilities. Growth Opportunities. And more! Work Arrangement: Fully Office Annual Hiring Range/Hourly Rate: $18.00 USD per hour Actual compensation offer to candidate may vary from posted hiring range based upon geographic location, work experience, education, and/or skill level. The pay ratio between base pay and target incentive (if applicable) will be finalized at offer. Apply today! #LI-ME1 Location:US-AZ-Phoenix, Arizona (East Sky Harbor Cir) Time Type:Full time Job Category:Supply Chain ServicesEEO Statement: Arrow is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, gender, age, sexual orientation, gender identity, national origin, veteran or disability status. (Arrow EEO/AAP policy) We anticipate this requisition will be open for a minimum of five days, though it may be open for a longer period of time. We encourage your prompt application.

Blue Wire is built around the simple idea that independent podcasts would be more successful if they worked together. This concept is the foundation of Blue Wire's network of 310+ shows from Green Light with Chris Long, Stay Hot, and Road Trippin to regional hits such as Bronx Pinstripes, Light Years, Pack-A-Day and many more. We believe that hustle, authenticity, and community are cornerstones of success, and these are the values that connect our employees, network podcasts and listeners. Blue Wire and Wynn Resorts have partnered on a first-of-its-kind brand alliance. Wynn Resorts is home to Blue Wire's physical studio space within the heart of its flagship Las Vegas property. We activate around tentpole sports events like March Madness, NFL Draft, and NBA Summer League. Blue Wire also produces compelling, athlete- and influencer-led content year-round out of the studio while continuing to innovate new ideas and promotions with the world-class hospitality brand. Position Overview: Blue Wire Studios is looking for an experienced Studio Technician with video expertise to assist in the production of content from our Wynn studio property. You will assist in the operation of a studio while maintaining video quality of our content. You may edit and mix video files. You understand video engineering workflow (PTZ & cinema cameras, video switching in a live environment, streaming procedures across various platforms including codecs and formats, vMix, vMix call, OBS, and lighting). This role is a contractor position, based in Las Vegas, NV. Candidates must reside in the area. Responsibilities include, but are not limited to: Video switching in a live environment Aid in development of new content formats with producers Assist in video content capture and editing of content Edit and assemble episodes of content Ensure all edits are completed according to Blue Wire editing specifications Ensure project deadlines are met Collaborate with teams across Blue Wire including development, production, postproduction, marketing, operations, business development, business affairs and more Qualifications & Skills: Candidate must be passionate, knowledgeable about the sports content medium and must have experience in the following categories: Hands on experience creating quality content a studio environment Triggering live switching of multiple cameras in a live environment Triggering live graphic overlays in a live environment Ability to trouble shoot video and live stream issues as they arise Be open to taking risks and trying things outs. Must not be afraid to fail Have a collaborative mindset Be meticulous editor and listener Posses' interpersonal skills such as communication skills, active listening, and the ability to foster relationships Basic knowledge of signal flow and troubleshooting capabilities Nice To Haves: Proficiency with Adobe creative suite Experience with Sony FX9s or other cinema cameras Experience with video/IP routing hardware/software Experience with BlackMagic switchers