Industrial Maintenance Mechanic jobs at OtterBase - 93 jobs

This position will report to the Service Manager. The responsibilities of the Service Technician are to service, maintain, troubleshoot, and repair heating, ventilation, air conditioning, refrigeration systems and equipment. Diagnosing malfunctions and determining repair needs, inspecting, and performing tests on systems and equipment for defective parts and to assure proper functioning. Essential Job Function Customer Service Always present a professional positive and helpful attitude when interacting with customers and co-workers. Exhibit an understanding of Human Relations and functions as a “team player”. This position has frequent contact with customers, requiring reasonable tact and strong verbal/written communication skills. Observe additional maintenance needs requiring attention and report to the appropriate people. Basic Functions/Requirements Read and write English. Write legibly. Read a tape measure, perform basic math skills: (Add, Subtract, Fractions, Calculate sales tax) Must have valid Michigan drivers' licenses, good driving record (our insurance must accept you) Paperwork filled out properly daily, including electronic documentation, if applicable. Follow verbal and written instructions. Follow all safety rules. Be able to wear all P.P.E's when applicable (steel toe boots, gloves, safety glasses, hard hat, etc.) Lift, climb, bend, and kneel to complete assigned tasks. Tolerate working at heights off a ladder, scaffold, and aerial lifts. Perform heavy physical labor during adverse weather conditions. Work in confined spaces, exposed to fumes, chemicals, grease, acids, oil and in the vicinity of noise and vibration with proper P.P.E's. Maintain cooperative and effective working relationship with others. Be able to take “on call” in the regular rotation. Be available to work any time of the day to take care of your customer. (Before 8:00 am and after 5:00 pm during the week, any time weekends, and holidays) 4 hours safety training required annually. Must have refrigerant transition and recovery certification card. Continuing education is expected. Education/Experience High school diploma or GED preferred. 10+ Years' experience preferred. Work Coordination and Paperwork Coordinate start and stop time with Service Dispatcher for each call. Organize all work detail (work performed, service recommendations, etc.) and complete an accurate work ticket, paper or electronic, for billing and payroll purposes. Submit all paperwork to the office each Monday before 10:00 AM or at end of each month is required. Obtain record on work ticket and communicate to vendor an appropriate purchase order number when purchasing job-related parts and supplies. Physical Requirements Climbing (ladders, stairs, etc.) while carrying tools and parts Lift 50 lbs. frequently, 100 lbs. occasionally, and 100+ lbs. with assistance Bending or stooping Extended periods of walking Regular exposure to weather conditions Operating a motor vehicle Owning and operating power or hand tools Exposure to potentially harmful chemicals or materials with proper P.P.D's Non-Essential duties and responsibilities Performs other duties as assigned by Management.

We are seeking a skilled and versatile Maintenance Technician 1 to join our client's team in Troy, MI. In this role, you will perform preventive maintenance, troubleshoot equipment, and support facility operations to ensure optimal performance and safety. This position requires strong mechanical aptitude, fabrication skills, and the ability to work independently with minimal supervision. RESPONSIBILITIES AND ESSENTIAL DUTIES: Perform duties safely using approved safety equipment and procedures. Troubleshoot Trystar equipment with minimal supervision; contact manufacturers for technical support as needed. Perform preventive maintenance (PMs) regularly and as required. Update maintenance management software by entering assets, work orders, and generating PM/work order status reports. Apply general fabrication skills, including welding (MIG & TIG), plasma cutting, torch cutting, and band saw cutting. Read facility blueprints for equipment and production line layout. Apply mechanical knowledge and basic electrical meter skills for troubleshooting. Disassemble and diagnose mechanical failures; perform necessary repairs. Assist with machinery installations and maintain most equipment independently. Apply plumbing skills for facility maintenance (e.g., sinks, drain lines, toilets). Apply HVAC skills for equipment and facility maintenance (e.g., heaters, furnaces, AC systems, exhaust fans). Assist outside contractors with machinery repairs and installations. Maintain knowledge of pneumatics (repair airlines, fittings, valves, cylinders) and hydraulics (replace hoses, pumps, valves). Maintain a clean and organized work area throughout the day. Safely operate forklifts and scissor lifts. Inventory and control stock of maintenance supplies. Participate in continuous improvement efforts by identifying and supporting process improvements. MINIMUM REQUIREMENTS: Basic Qualifications High school diploma or equivalent (GED). Two years of technical training in industrial maintenance or building repair OR four years of experience as an Industrial Maintenance associate. Ability to read, write, and understand work instructions in English. Familiarity with operating power tools. Ability to safely perform job responsibilities. Flexibility in work hours and participation in on-call rotation. Positive attitude and adherence to company policies.

Calling all innovators - find your future at Fiserv. We're Fiserv, a global leader in Fintech and payments, and we move money and information in a way that moves the world. We connect financial institutions, corporations, merchants, and consumers to one another millions of times a day - quickly, reliably, and securely. Any time you swipe your credit card, pay through a mobile app, or withdraw money from the bank, we're involved. If you want to make an impact on a global scale, come make a difference at Fiserv. Job Title Industrial Mechanic - 3rd shift What does a successful Industrial Mechanic do at Fiserv? You will join the team at our Nashville location to analyze, troubleshoot and maintain manufacturing equipment. You will commonly use test equipment such as VOM meters, current clamps, and other diagnostic equipment to accomplish the job. You will perform efficient repairs on production equipment that includes mills, lathes, robotic automation and other mechanical equipment. What you will do: Maintain and repair production equipment. Read and interpret electrical, mechanical, hydraulic prints, OEM manuals. Perform preventive maintenance procedures on production equipment throughout the plant. Operate mills, lathes, welders, and other equipment to perform repairs. Utilize PM software to track parts usage and equipment PM's and in-house production monitoring to respond to machine downtime. Perform these and other duties as assigned by supervisor or other appropriate management personnel. What you will need to have: A high school diploma or GED is required. 3+ years of progressive maintenance repair and electronic/mechanical troubleshooting. Ability and willingness to go a local community college to earn degree or certification with our Fiserv tuition reimbursement program. Experience using a computer for data entry. Experience with using hand tools like drill, screwdriver, and soldering equipment. What would be great to have: Associates degree in Electronic Technology, Industrial Maintenance, or equivalent Military training and background. 5+ years of production maintenance with electronic repair experience. Experience with mills and lathes. Important info about this role: You will work an assigned schedule on: 3rd shift. Eligible to earn shift differential pay for working the above shift. Flexibility in schedule to work required overtime that includes weekends and holidays. You must currently possess valid and unrestricted U.S. work authorization to be considered for this role. Individuals with temporary visas including, but not limited to, F-1 (OPT, CPT, STEM), H-1B, H-2, or TN, or any candidate requiring sponsorship, now or in the future, will not be considered for this role. This role is not eligible to be performed in Colorado, California, District of Columbia, Hawaii, Illinois, Maryland, Minnesota, New Jersey, New York, Nevada, Rhode Island or Washington. It is unlawful to discriminate against a prospective employee due to the individual's status as a veteran. Please note that salary ranges provided for this role on external job boards are salary estimates made by outside parties and may not be accurate. Thank you for considering employment with Fiserv. Please: Apply using your legal name Complete the step-by-step profile and attach your resume (either is acceptable, both are preferable). Our commitment to Equal Opportunity: Fiserv is proud to be an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, gender, gender identity, sexual orientation, age, disability, protected veteran status, or any other category protected by law. If you have a disability and require a reasonable accommodation in completing a job application or otherwise participating in the overall hiring process, please contact *******************. Please note our AskHR representatives do not have visibility to your application status. Current associates who require a workplace accommodation should refer to Fiserv's Disability Accommodation Policy for additional information. Note to agencies: Fiserv does not accept resume submissions from agencies outside of existing agreements. Please do not send resumes to Fiserv associates. Fiserv is not responsible for any fees associated with unsolicited resume submissions. Warning about fake job posts: Please be aware of fraudulent job postings that are not affiliated with Fiserv. Fraudulent job postings may be used by cyber criminals to target your personally identifiable information and/or to steal money or financial information. Any communications from a Fiserv representative will come from a legitimate Fiserv email address.

Job Description MissOuri Smelting Technology Inc., a Toyota Tsusho America Group Company , has immediate opening for full-time, direct hire experienced multi-craft INDUSTRIAL MAINTENANCE MECHANIC / ELECTRICIAN in Jackson, TN. MOST is a secondary aluminum recycler that receives, processes, and melts aluminum to produce high quality molten and solid products for use by other industries, including the production of automobile parts. Experience: 4 years industrial related experience; combined w/ vocational or equivalent recognized training. HS graduate or equivalent; PLC exp. plus. Successful candidates will have strong work ethic. Skill Set: Mechanical, hydraulics, pneumatics, fabrication, welding, strong troubleshooting, electrical, and ability to work in the heat. PLC programming a plus. Responsibilities: Completing repairs, maintaining building equipment, machinery and mechanical equipment such as motors, conveyor systems, pneumatic systems, hydraulic systems and production equipment. Identifies problems, conducts troubleshooting, and performs preventative maintenance and maintenance service. Install new equipment/systems. Update various types of equipment to improve efficiency as needed. Shift: 12 hr night shift (7pm-7am) 2-2-3 schedule Pay up to $44.50 hr. based on experience/training. Medical/Dental/Vision effective 1st of the month after hire 401k Profit Sharing starting day 1 Annual Bonus Program Company paid Life Insurance Company paid Short and Long Term Disability Tuition Reimbursement Offered

it's what's inside that counts Now Offering a $5,000 Sign-On Bonus! _______________________________ There's more to CMC than our products and the buildings, structures, and roads they go into. At CMC, it's the people inside our recycling centers, fabrication plants, manufacturing facilities, steel mills and offices that make us who we are as a company. Our success comes from finding, retaining, and supporting the highest quality talent by offering: * Day 1 Benefits Coverage with low cost Medical, Vision, Dental * Day 1 Paid-time Off and Vacation * 4.5% Company Match 401(k) plan * $500 Annual Company-paid Lifestyle Benefit * Competitive Compensation and Bonuses * Company-paid Life and Disability Insurance * Employee Stock Purchase Plan * Training and Advancement Opportunities Why This Job CMC provides an excellent opportunity to learn the steel, construction reinforcement and ground stabilization industries and to grow in your career. Whether you will spend your day brainstorming in an office cubicle, operating a crane, running manufacturing equipment or troubleshooting technical obstacles, at CMC, you'll get the training and support from your team that you need to excel in your role and reach your full potential. What You'll Do * Participates in the CMC Safety Programs and proactively upholds the CMC Safety Culture * Diagnose malfunctioning systems, apparatus, and components using test equipment, hand tools and personal knowledge to determine root cause * Use SAP maintenance module in the execution of duties, utilize computers to acquire information, documentation, account for time and corrective actions * Demonstrates dependability in attendance, work completion, and flexibility to meet business needs * Determine grades and sizes of bolts, pipes, tubing, cables, and wires * Interpret blueprints, drawings, and schematics * Meet expectations of work quality * Monitor and inspect equipment for defects. Properly remove defective parts by dismantling devices using hoists, overhead cranes, hand, and power tools * Possess specific fundamental knowledge of bearings, power transmission equipment, hydraulics/pneumatics, lubrication, welding principles, rigging, overhead cranes, gearboxes, and mobile equipment operation * Prepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends * Work safely to prevent on the job injuries by following safety rules and regulations at all times including proper wearing of company PPE What You'll Need * Ability to stand, walk, bend, and work in heights for extended periods of time in extreme temperatures * Ability to utilize precision measurement instruments * Ability to work rotating shifts which include weekends and holidays * Experience with welding, cutting, fabrication, and equipment maintenance preferred * Minimum 1 year field experience in either heavy industrial operations and/or manufacturing environment preferred * Minimum 1 year of experience with welding, cutting, fabrication, and equipment maintenance preferred * Minimum 3 years of field experience in either heavy industrial operations and/or manufacturing environment strongly preferred Your Education * High School Diploma or GED preferred We are CMC, a Fortune 500 company at the leading edge of our industry. Our construction reinforcement and steel products have supported construction projects and structures around the world. The secret to our success? We've built our legacy by assembling a team of innovators and doers to tackle some of the most challenging construction reinforcement problems facing our world for more than 100 years - and we're just getting started. If you're ready to join a team working to make our industry more sustainable, support the bridges, roadways, buildings and infrastructure that connects our communities, and do meaningful work, you're ready to join CMC. Apply today and start moving your career - and our world - forward. Let's build a better world! CMC is committed to providing equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, age, physical or mental disability, national origin, citizenship, military or veteran status, sexual orientation, gender identity and/or expression, genetic information, or other status protected by federal, state or local law. From Fortune Magazine. 2025 Fortune Media IP Limited. All rights reserved. Used under license. Current Employee? Click Here to Apply. Current Employees Apply Click here to apply. Nearest Major Market: Knoxville

Requisition Id 15594 We are seeking a Maintenance Engineer for the High Flux Isotope Reactor (HFIR) who will be responsible for maintaining the HFIR equipment and facilities to ensure safe, reliable, predictable, and efficient operations. This scope includes the HFIR maintenance program and processes; implementation of corrective, predictive, preventative, and modification work activities; work scheduling; and outage management. HFIR Maintenance Engineers work closely with members of the HFIR Beamline Operations Section, Science staff, Instrument Engineers, Reactor Operations personnel, and Melton Valley Complex Facility Supervisors. This position resides in the Maintenance Engineering Group in the HFIR Maintenance Section, Research Reactors Division, Neutron Sciences Directorate at Oak Ridge National Laboratory (ORNL). Major Duties/Responsibilities: Maintenance Planning and Task Leading: * Develop written directions to perform and document repetitive maintenance, corrective maintenance, and modification activities on nuclear safety related and non-nuclear equipment in an operating reactor facility. * Determine the required specifications for materials, and request/coordinate the procurement of required material. * Provide technical direction during field work to craft workers and supervisors. * Coordinate with equipment owners and facility management to accomplish work safely and with efficient use of resources. * Identify risks to personnel or plant and work with RRD/NSD/NTD and other personnel to plan appropriate risk mitigation, including those concerning health physics, industrial hygiene, and safety. * Understand and implement human performance principles in the planning of maintenance work packages. * Ensure that UT-Battelle policies concerning environmental protection, safety, ALARA, and quality assurance are considered and complied with. Maintenance Coordination and Scheduling: * Administer the Computerized Maintenance Management System (CMMS) for a given area (e.g., mechanical, electrical, facilities), including the processing and initial task assignment or the administration of individual work activities. * Responsible for analyzing maintenance practices and procedures, equipment failures, identifying equipment operating, and reporting results as assigned. Additional Responsibilities: * Some duties will require work to be performed in a radiological area. * Deliver ORNL's mission by aligning behaviors, priorities, and interactions with our core values of Impact, Integrity, Teamwork, Safety, and Service. Promote equal opportunity by fostering a respectful workplace - in how we treat one another, work together, and measure success. Basic Qualifications: * A BS degree in engineering, applied science, or a related discipline with 5 or more years of relevant experience. * An equivalent combination of education and experience may be considered (HS diploma with at least 9 years of relevant experience or AS degree in related discipline with at least 7 years of relevant experience). * Experience diagnosing equipment problems and developing formal work package instructions for documentation of repairs. Preferred Qualifications: * A BS degree with a minimum of 10 years of relevant nuclear experience. * Experience working in a nuclear reactor environment in the mechanical, electrical, or operations field. * Familiarity with maintenance activities in a nuclear reactor operating environment. * HFIR facility knowledge. * Experience in construction management and project oversight. * Familiarity with the NEC (National Electrical Code). * Experience with predictive maintenance techniques and equipment reliability programs. * Familiarity with beamline operations and neutron scattering equipment. Special Requirements: * Physical Requirements: Work involves various physical requirements and working conditions. As such, a pre-hire physical will be required after offer. Security, Credentialing, and Eligibility Requirements: * This position requires the ability to obtain and maintain an HSPD-12 PIV badge. * For employment at Oak Ridge National Laboratory (ORNL), a Real ID compliant form of identification will be required. * Additionally, ORNL is subject to Department of Energy (DOE) access restrictions. All employees must also be able to obtain and maintain a federal Personal Identity Verification (PIV) card as mandated by Homeland Security Presidential Directive 12 (HSPD-12) and Department of Energy (DOE) Order 473.1A, which requires a favorable post-employment background investigation. * To obtain this credential, new employees must successfully complete and pass a Federal Tier 1 background check investigation. This investigation includes a declaration of illegal drug activities, including use, supply, possession, or manufacture within the last year. This includes marijuana and cannabis derivatives, which are still considered illegal under federal law, regardless of state laws. For foreign national candidates: * If you have not resided in the U.S. for three consecutive years, you are not eligible for the PIV credential and instead will need to obtain a favorable Local Site Specific Only (LSSO) risk determination to maintain employment. * Once you meet the three-year residency requirement, you will be required to obtain a PIV credential to maintain employment. Benefits at ORNL: We offer competitive pay and benefits programs to attract and retain hardworking people! The laboratory offers many employee benefits, including medical and retirement plans and flexible work hours, to help you and your family live happy and healthy. Employee amenities such as on-site fitness, banking, and cafeteria facilities are also provided for convenience. Other benefits include the following: Prescription Drug Plan, Dental Plan, Vision Plan, 401(k) Retirement Plan, Contributory Pension Plan, Life Insurance, Disability Benefits, Generous Vacation and Holidays, Parental Leave, Legal Insurance with Identity Theft Protection, Employee Assistance Plan, Flexible Spending Accounts, Health Savings Accounts, Wellness Programs, Educational Assistance, and Employee Discounts. Relocation Assistance is available for this position. If you have difficulty using the online application system or need an accommodation to apply due to a disability, please email: ***********************. This position will remain open for a minimum of 5 days after which it will close when a qualified candidate is identified and/or hired. We accept Word (.doc, .docx), Adobe (unsecured .pdf), Rich Text Format (.rtf), and HTML (.htm, .html) up to 5MB in size. Resumes from third party vendors will not be accepted; these resumes will be deleted and the candidates submitted will not be considered for employment. ORNL is an equal opportunity employer. All qualified applicants, including individuals with disabilities and protected veterans, are encouraged to apply. UT-Battelle is an E-Verify employer. Nearest Major Market: Knoxville

Maintenance Technician Bodycote offers: * $1,500 Sign-on Retention Bonus! * Paid holidays and paid time off. * Shift differential for off-shifts. * 401k match, Medical, Dental, and Vision Plans for employees and families. * Ability to work full-time, 40 hours per week. * 2 pm-10:30 pm, Monday-Friday, weekends as required. * Must pass a pre-employment drug screen and basic physical. Our people are the heart of our business. As the world's largest provider of thermal processing services, Bodycote employs thousands of highly skilled staff around the globe, including some of the best engineers, scientists, and technicians in the industry. Come join our team! Due to the nature of our business and a heavy industrial market, Bodycote deems this position to be safety-sensitive. Position Summary: Based in Grand Rapids, Michigan, the Maintenance Technician will perform essential job functions associated with heat treatment under the direction of the Maintenance Manager to meet customer specifications, including assisting other employees as needed. Essential Job Functions (Duties and Responsibilities): The primary duties consist of, but are not limited to, the following. * Implement the facility's preventative maintenance program. * Conduct scheduled inspections of fluid levels, water flows, quench oils, filters, washer soap, and similar items; notify supervisor of issues as needed. * Maintain a clean and organized environment in the Maintenance Department work area; promptly clean up after maintenance and repair work is completed within the facility. * Assist in equipment performance testing per companywide and manufacturer's guidelines. * Perform corrective actions required for out-of-specification conditions as directed by the supervisor. * Assist in analytical troubleshooting of issues to maintain equipment, facilities, and vehicles. * Accurately record and document all completed maintenance, modifications, and repairs. * Maintain shop copies of manuals and blueprints in a neat and organized manner; provide others with updated information as required. * Run company errands and pick up equipment, materials, and supplies as required. * Operate company vehicles safely and courteously. * Promptly report observed equipment, facility, and vehicle repair or maintenance needs to the supervisor. * Make suggestions for changes that would help the facility achieve improved efficiency, quality, and safety. * Assist in maintaining the inventory of maintenance supplies, tools, and replacement parts. * This position is responsible for the care and treatment of our customers' inventory and, as such, will perform duties safely and responsibly to prevent customer loss or damage. * Must have the ability to report for work on time, follow directions, interact effectively with co-workers, understand and follow rules and procedures, and accept constructive criticism. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skills, and/or abilities required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * This position must satisfy ITAR compliance requirements; therefore, candidates must be U.S. Citizens or Permanent Resident cardholders. * Education - College or technical degree in mechanical, electrical, or industrial maintenance preferred; High school diploma or equivalent plus 3-5 years industrial maintenance experience required. * Must possess troubleshooting skills with mechanical equipment and be analytical. * Knowledge and hands-on experience of computer applications, including Microsoft Office and databases, is required. * Ability to function as an effective team member through good communication and cooperation to meet plant goals. * Strong organizational and interpersonal skills; must have excellent multi-tasking skills and ability to prioritize workflow. * Actively participate in team meetings to work on problem-solving and continuous improvement of the organization. * Must demonstrate the ability to read, write, and communicate in the English language. Physical & Mental Demands: The following physical and mental demands consist of, but are not limited to, the following. * Must be able to work in an industrial environment at elevated heights and in confined spaces. * Manual dexterity to perform data entry functions. * Ability to bend, pull, stoop, stand, walk, kneel, crouch, crawl, climb, and reach to perform functions. * Ability to lift/push/pull up to 50 lbs. * May be exposed to heat, fumes, noise, and humidity, etc. * Must have the cognitive and mental capacity to perform essential job functions. * Must be able to communicate effectively orally and in writing. * Visual acuity to read documents, computer screens, files, etc. * Ability to hear in person and via phone. The statements herein are intended to describe the general nature and levels of the work performed by employees, but are not a complete list of responsibilities, duties, and skills required of personnel so classified. Furthermore, the job description does not constitute a written or implied contract for employment. Bodycote reserves the right to revise or change job duties and responsibilities as the need arises. Bodycote is an Equal Opportunity Employer and does not discriminate against current and prospective employees based on race, religious creed, color, national origin, ancestry, physical disability, mental disability, medical condition, genetic information, marital status, sex, gender, gender identity, gender expression, age for individuals over forty years of age, military and veteran status, sexual orientation, or any other basis protected by applicable federal, state and local laws.

Duration: 12 Months Qualifications: Mechanical, pneumatic and electrical skills, must analyze, troubleshoot and repair complex equipment and machinery. Ability to read and interpret technical manuals, schematics, diagrams and equipment specifications. Flexible and adaptable in working with/on a variety of equipment, processes, projects or assignments. Effectively works in a team setting, supporting team goals and objectives. Makes effective decisions relative to position requirements. Understanding and use of trades mathematics, calibration techniques, and precision measuring instruments essential. Constant attention performing moderately complex work requiring close limits of accuracy and tolerances. Lifting, pushing, pulling, moving of equipment and machinery up to 60 lbs. frequently. May work in awkward and difficult positions. Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment. Minimum of 3 years related experience preferred. Working knowledge of other maintenance trades/crafts. Responsibilities: Uses judgment to plan, perform, make decisions, troubleshoot and problem solve in performance of all maintenance tasks and prioritize workflow. Responsible for preventive maintenance activities. Works independently with minimal supervision and prioritizes own work schedule. Works with external contractors and vendors. Working knowledge of other maintenance trades/crafts. Ability to perform all functions of job within 12 months. Familiarity with Personal Computers and basic use of a Windows environment preferred. Position requires midnight and afternoon shifts including weekend coverage. Education : High School Diploma/GED (Required) Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment (Required) Additional Information All your information will be kept confidential according to EEO guidelines.

Duration: 12 Months Qualifications: Mechanical, pneumatic and electrical skills, must analyze, troubleshoot and repair complex equipment and machinery. Ability to read and interpret technical manuals, schematics, diagrams and equipment specifications. Flexible and adaptable in working with/on a variety of equipment, processes, projects or assignments. Effectively works in a team setting, supporting team goals and objectives. Makes effective decisions relative to position requirements. Understanding and use of trades mathematics, calibration techniques, and precision measuring instruments essential. Constant attention performing moderately complex work requiring close limits of accuracy and tolerances. Lifting, pushing, pulling, moving of equipment and machinery up to 60 lbs. frequently. May work in awkward and difficult positions. Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment. Minimum of 3 years related experience preferred. Working knowledge of other maintenance trades/crafts. Responsibilities: Uses judgment to plan, perform, make decisions, troubleshoot and problem solve in performance of all maintenance tasks and prioritize workflow. Responsible for preventive maintenance activities. Works independently with minimal supervision and prioritizes own work schedule. Works with external contractors and vendors. Working knowledge of other maintenance trades/crafts. Ability to perform all functions of job within 12 months. Familiarity with Personal Computers and basic use of a Windows environment preferred. Position requires midnight and afternoon shifts including weekend coverage. Education: High School Diploma/GED (Required) Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment (Required) Additional Information All your information will be kept confidential according to EEO guidelines.

Join Control Southern's expert team and help keep critical industrial systems running safely and efficiently. What You'll Do Inspect, repair, and maintain a variety of valves (control, safety, relief, gate, globe, check, ball, butterfly, plug) and actuators (pneumatic, hydraulic, electric). Perform calibration, testing, and troubleshooting of valves and process instrumentation. Complete full repair cycle: pre-testing, disassembly, cleaning, machining, lapping, painting, assembly, and final inspection. Document all repair activities, including cause of failure and parts used. Provide technical support and communicate with customers on-site and in-shop. Adhere to National Board VR/UV program guidelines and site-specific safety requirements. Operate repair equipment such as overhead cranes, forklifts, sandblasters, and power tools. What We're Looking For Experience: 1-3 years in valve, pump, or actuator repair (or equivalent training). Welding and machining skills are a plus. Skills: Strong mechanical aptitude, troubleshooting ability, time management, and teamwork. Requirements: Valid driver's license and insurability. Ability to lift up to 44 lbs and work in varied conditions (heat, cold, clean rooms). Comfortable with off-hours, weekends, and overtime as needed. Knowledge of rigging and moving heavy equipment. Why Join Us? Be part of a safety-first culture with opportunities for growth. Work on diverse projects at our repair facilities and customer sites. Competitive pay and benefits. Ready to make an impact? Apply now and help us deliver reliability and safety to our customers.

BCforward began as an IT business solutions and staffing firm. Founded in 1998, BCforward has grown with our customers' needs into a full service personnel solutions organization. BCforward's headquarters are in Indianapolis, Indiana and also operates delivery centers in 20 locations in North America as well as India and Puerto Rico. We are currently the largest consulting firm and largest MBE certified firm headquartered in Indiana. Job Description Maintenance Engineer 9/19/2016 - 9/19/2017 Detroit, MI $32/hr Qualifications: Mechanical, pneumatic and electrical skills, must analyze, troubleshoot and repair complex equipment and machinery. Ability to read and interpret technical manuals, schematics, diagrams and equipment specifications. Flexible and adaptable in working with/on a variety of equipment, processes, projects or assignments. Effectively works in a team setting, supporting team goals and objectives. Makes effective decisions relative to position requirements. Understanding and use of trades mathematics, calibration techniques, and precision measuring instruments essential. Constant attention performing moderately complex work requiring close limits of accuracy and tolerances. Lifting, pushing, pulling, moving of equipment and machinery up to 60 lbs. frequently. May work in awkward and difficult positions. Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment. Minimum of 3 years related experience preferred. Working knowledge of other maintenance trades/crafts. Responsibilities: Uses judgment to plan, perform, make decisions, troubleshoot and problem solve in performance of all maintenance tasks and prioritize workflow. Responsible for preventive maintenance activities. Works independently with minimal supervision and prioritizes own work schedule. Works with external contractors and vendors. Working knowledge of other maintenance trades/crafts. Ability to perform all functions of job within 12 months. Familiarity with Personal Computers and basic use of a Windows environment preferred. Position requires midnight and afternoon shifts including weekend coverage. Comments/Special Instructions Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment. Minimum of 3 years related experience preferred. Working knowledge of other maintenance trades/crafts. Sandra Taylor ************ Additional Information Sandra Taylor ************

BCforward began as an IT business solutions and staffing firm. Founded in 1998, BCforward has grown with our customers' needs into a full service personnel solutions organization. BCforward's headquarters are in Indianapolis, Indiana and also operates delivery centers in 20 locations in North America as well as India and Puerto Rico. We are currently the largest consulting firm and largest MBE certified firm headquartered in Indiana. Job Description Maintenance Engineer 9/19/2016 - 9/19/2017 Detroit, MI $32/hr Qualifications: Mechanical, pneumatic and electrical skills, must analyze, troubleshoot and repair complex equipment and machinery. Ability to read and interpret technical manuals, schematics, diagrams and equipment specifications. Flexible and adaptable in working with/on a variety of equipment, processes, projects or assignments. Effectively works in a team setting, supporting team goals and objectives. Makes effective decisions relative to position requirements. Understanding and use of trades mathematics, calibration techniques, and precision measuring instruments essential. Constant attention performing moderately complex work requiring close limits of accuracy and tolerances. Lifting, pushing, pulling, moving of equipment and machinery up to 60 lbs. frequently. May work in awkward and difficult positions. Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment. Minimum of 3 years related experience preferred. Working knowledge of other maintenance trades/crafts. Responsibilities: Uses judgment to plan, perform, make decisions, troubleshoot and problem solve in performance of all maintenance tasks and prioritize workflow. Responsible for preventive maintenance activities. Works independently with minimal supervision and prioritizes own work schedule. Works with external contractors and vendors. Working knowledge of other maintenance trades/crafts. Ability to perform all functions of job within 12 months. Familiarity with Personal Computers and basic use of a Windows environment preferred. Position requires midnight and afternoon shifts including weekend coverage. Comments/Special Instructions Mandatory City of Detroit Third Class Refrigeration License or an Electrician Journeyman's status within 1yr of employment. Minimum of 3 years related experience preferred. Working knowledge of other maintenance trades/crafts. Sandra Taylor ************ Additional Information Sandra Taylor ************

Job DescriptionDescription: IS OPEN FOR 3rd SHIFT CURRENTLY - 11:30 pm - 7:30 am *** The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site's business goals and objectives. Functions Responsible for diagnosing and repairing miscellaneous manufacturing equipment with limited support needed Rolling toolbox & knowledge of tool room equipment Read and interpret equipment manuals and work orders to perform required maintenance and service Disassemble machinery and equipment to remove parts and make repairs Examines parts for defects, such as breakage or excessive wear Repairs, replaces, adjust, and align components of machinery and equipment Runs repaired machinery and equipment to verify adequacy of repairs Maintains accurate records of maintenance work performed and inventory Able to lead problem solving and troubleshooting efforts associated with mid to high-level process issues Perform regular preventative maintenance on machines and equipment Competencies Accountability Adaptability Analytical thinking Attention to detail Communication Creativity Decision making Focus on quality Initiative Integrity Planning and organizing Problem solving Results-oriented Safety-conscious Teamwork and collaboration Technical expertise Time management Writing skills · Understand and implement Drake Driven Core Values into everyday work habits. Requirements: High School Diploma/GED Maintenance Technician Certification is a plus Previous work experience as a Machinist is a plus Must have own tools and toolbox to be left at the shop Ability to read blueprints, schematics and manuals Hands on experience with different manual, semi-automated or automated tools and machines (lathes, grinders etc.) Proficient with Outlook - Plex is a plus Experience of electrical & hydraulic knowledge Experience with diagnosing and repairing issues with CNC's lathes + Mills Experience with APC repair Knowledge and understanding of CNC controls Experience with Fanuc Robots is a plus Ability to work Independently or with others Prior experience with P.M.'s The Benefits of Working With Us! Employer Paid Benefits Short Term Disability Long Term Disability Basic Life Insurance and Accidental Death & Dismemberment Optional/Voluntary Benefits 401(k) with Employer Match Medical & Prescription Dental Vision Flexible Spending Account Voluntary Life and Accidental Death & Dismemberment Critical Illness Accident Legal Plan 7 Paid Holidays 1 Floating Holiday Paid Sick/Personal Leave Paid Time Off (PTO) Drake Wear - our own line of branded merchandise

Job DescriptionDescription: is for 3rd shift - 11:00 pm - 7:30 am** The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site's business goals and objectives. Functions Responsible for diagnosing and repairing miscellaneous manufacturing equipment with little or no support needed Rolling toolbox & knowledge of tool room equipment Read and interpret equipment manuals and work orders to perform required maintenance and service Disassemble machinery and equipment to remove parts and make repairs Examines parts for defects, such as breakage or excessive wear Repairs, replaces, adjust, and align components of machinery and equipment Runs repaired machinery and equipment to verify adequacy of repairs Maintains accurate records of maintenance work performed and inventory Able to lead problem solving and troubleshooting efforts associated with high-level process issues Provides guidance to employees in the Maintenance Department Competencies Accountability Adaptability Analytical thinking Attention to detail Communication Creativity Decision making Focus on quality Initiative Integrity Planning and organizing Problem solving Results-oriented Safety-conscious Teamwork and collaboration Technical expertise Time management Writing skills · Understand and implement Drake Driven Core Values into everyday work habits. Requirements: High School Diploma/GED Maintenance Technician Certification is a plus Previous work experience as a Machinist is a plus Must have own tools and toolbox to be left at the shop Ability to read blueprints, schematics and manuals Ability to weld tig/mig Hands on experience with different manual, semi-automated or automated tools and machines (lathes, grinders etc.) Proficient with Outlook - Plex is a plus Extensive experience of electrical & hydraulic knowledge Extensive experience with diagnosing and repairing issues with CNC's lathes + Mills Extensive experience with APC repair Extensive knowledge and understanding of CNC controls Experience with Fanuc Robots is a plus Ability to work Independently or with others The Benefits of Working With Us! Employer Paid Benefits Short Term Disability Long Term Disability Basic Life Insurance and Accidental Death & Dismemberment Optional/Voluntary Benefits 401(k) with Employer Match Medical & Prescription Dental Vision Flexible Spending Account Voluntary Life and Accidental Death & Dismemberment Critical Illness Accident Legal Plan 7 Paid Holidays 1 Floating Holiday Paid Sick/Personal Leave Paid Time Off (PTO) Drake Wear - our own line of branded merchandise

Full-time Description is for 3rd shift - 11:00 pm - 7:30 am** The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site's business goals and objectives. Functions Responsible for diagnosing and repairing miscellaneous manufacturing equipment with little or no support needed Rolling toolbox & knowledge of tool room equipment Read and interpret equipment manuals and work orders to perform required maintenance and service Disassemble machinery and equipment to remove parts and make repairs Examines parts for defects, such as breakage or excessive wear Repairs, replaces, adjust, and align components of machinery and equipment Runs repaired machinery and equipment to verify adequacy of repairs Maintains accurate records of maintenance work performed and inventory Able to lead problem solving and troubleshooting efforts associated with high-level process issues Provides guidance to employees in the Maintenance Department Competencies Accountability Adaptability Analytical thinking Attention to detail Communication Creativity Decision making Focus on quality Initiative Integrity Planning and organizing Problem solving Results-oriented Safety-conscious Teamwork and collaboration Technical expertise Time management Writing skills · Understand and implement Drake Driven Core Values into everyday work habits. Requirements High School Diploma/GED Maintenance Technician Certification is a plus Previous work experience as a Machinist is a plus Must have own tools and toolbox to be left at the shop Ability to read blueprints, schematics and manuals Ability to weld tig/mig Hands on experience with different manual, semi-automated or automated tools and machines (lathes, grinders etc.) Proficient with Outlook - Plex is a plus Extensive experience of electrical & hydraulic knowledge Extensive experience with diagnosing and repairing issues with CNC's lathes + Mills Extensive experience with APC repair Extensive knowledge and understanding of CNC controls Experience with Fanuc Robots is a plus Ability to work Independently or with others The Benefits of Working With Us! Employer Paid Benefits Short Term Disability Long Term Disability Basic Life Insurance and Accidental Death & Dismemberment Optional/Voluntary Benefits 401(k) with Employer Match Medical & Prescription Dental Vision Flexible Spending Account Voluntary Life and Accidental Death & Dismemberment Critical Illness Accident Legal Plan 7 Paid Holidays 1 Floating Holiday Paid Sick/Personal Leave Paid Time Off (PTO) Drake Wear - our own line of branded merchandise

IS OPEN FOR 3rd SHIFT CURRENTLY - 11:30 pm - 7:30 am *** The maintenance technician position is responsible for performing highly diversified duties to install, troubleshoot, repair and maintain production and facility equipment according to safety, predictive and productive maintenance systems and processes to support the achievement of the site's business goals and objectives. Functions Responsible for diagnosing and repairing miscellaneous manufacturing equipment with limited support needed Rolling toolbox & knowledge of tool room equipment Read and interpret equipment manuals and work orders to perform required maintenance and service Disassemble machinery and equipment to remove parts and make repairs Examines parts for defects, such as breakage or excessive wear Repairs, replaces, adjust, and align components of machinery and equipment Runs repaired machinery and equipment to verify adequacy of repairs Maintains accurate records of maintenance work performed and inventory Able to lead problem solving and troubleshooting efforts associated with mid to high-level process issues Perform regular preventative maintenance on machines and equipment Competencies Accountability Adaptability Analytical thinking Attention to detail Communication Creativity Decision making Focus on quality Initiative Integrity Planning and organizing Problem solving Results-oriented Safety-conscious Teamwork and collaboration Technical expertise Time management Writing skills · Understand and implement Drake Driven Core Values into everyday work habits. Requirements High School Diploma/GED Maintenance Technician Certification is a plus Previous work experience as a Machinist is a plus Must have own tools and toolbox to be left at the shop Ability to read blueprints, schematics and manuals Hands on experience with different manual, semi-automated or automated tools and machines (lathes, grinders etc.) Proficient with Outlook - Plex is a plus Experience of electrical & hydraulic knowledge Experience with diagnosing and repairing issues with CNC's lathes + Mills Experience with APC repair Knowledge and understanding of CNC controls Experience with Fanuc Robots is a plus Ability to work Independently or with others Prior experience with P.M.'s The Benefits of Working With Us! Employer Paid Benefits Short Term Disability Long Term Disability Basic Life Insurance and Accidental Death & Dismemberment Optional/Voluntary Benefits 401(k) with Employer Match Medical & Prescription Dental Vision Flexible Spending Account Voluntary Life and Accidental Death & Dismemberment Critical Illness Accident Legal Plan 7 Paid Holidays 1 Floating Holiday Paid Sick/Personal Leave Paid Time Off (PTO) Drake Wear - our own line of branded merchandise

DYNAMIC COMPONENTS / ENGINE BUILD-UP TRAINEE Reports To: Director of Operations Status: Non-Exempt (2nd shift premium is $1.50/hour) BASIC WORKER FUNCTION: Assembles machined parts and subassemblies to make complex, precision assemblies, and inspects, adjusts and overhauls/repairs used precision assemblies, such as main rotor spindles and hub assemblies, dampers, main rotor shaft and transmission, tail rotor gearbox and housings, and piston and turbine engine build-ups according to specifications. Signs off as legally appropriate as a repairman under certification of FAR 65.103. ADDITIONAL GENERAL DESCRIPTION OF TASKS: Selects appropriate subassembly parts according to specifications and measures with micrometers, vernier calipers, etc. to verify specified tolerance. Hones and buffs parts to fit. Drills, taps, reams, countersinks, and spotfaces bolt holes in parts, using drill press or portable drill. Positions and aligns parts, using jigs, fixtures, and templates as appropriate. Assembles parts with appropriate hardware, using lockwire where required. Assembles main rotor spindles, hubs, and swashplate assemblies. Assembles and tests dampers, doing hydraulic test PSIG, flow rate, etc., and records results. Assembles correlator. Assembles main rotor shaft and transmission. Assembles drive belt pulley and installs bearing and sleeve. Assembles tail rotor gearbox including shaft, gears, housing, and oil cup fillers. Installs swashplate on main rotor gearbox. Installs control rods in transmission assembly. Inspects and tests work as appropriate to assure conformance to specifications. Adjusts, and repairs used precision assemblies and subassemblies. Keep records as directed. Maintains tools and equipment used. Observes all safety regulations. Other duties as required. REQUIRED KNOWLEDGE, SKILLS AND ABILITIES: Experience and demonstrated expertise in manufacturing, maintenance, and repair of helicopter components and engine/powerplant. Knowledge of the theory and mechanics of the various components assembled, including hydraulic theory. Certification as repairman per FAR 65.103 for repair station or A&P license. Ability to build all precision assemblies and subassemblies in transmission room area. Ability to use hand and power tools, arbor press, and other equipment to assemble components. Ability to use precision measuring devices such as micrometers, vernier calipers, depth gauges, etc. Ability to do complex, precision work with hands. Ability to read and work blueprints and specifications. Ability to keep records. Ability to troubleshoot problems on an independent basis. Ability to work and problem-solve with minimal supervision. Ability to use shop mathematics. Ability to work in a Team environment. Ability to work overtime. *Must be able to meet personal tool requirements.

Application Deadline January 30, 2026 Department Maintenance Employment Type Full Time Location Antioch, TN Address 4350 Hurricane Creek Boulevard, Antioch, Tennessee, 37013 Open in Google Maps Workplace type Onsite Key Responsibilities Skills, knowledge & expertise Job benefits About Trinidad Benham We are a 100% employee-owned company offering an Employee Stock Ownership Plan (ESOP). Trinidad Benham cares about you beyond a paycheck and a benefits package. We are culture of teamwork, creativity, pride, and ownership. Everyone at Trinidad Benham strives cohesively to offer exceptional products and service because we know our efforts result in a healthy bottom line and a thriving ESOP. We are planting the seeds for a more sustainable tomorrow. Become an owner today! Trinidad Benham Corporation is an equal employment opportunity and affirmative action employer that participates in the E-Verify program as required by law. All qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, Veteran status or other legally protected characteristics.

Stefanini Group is looking for Maintenance Technician - Memphis, Tennessee Responsibilities Survey buildings and repair mechanical systems to ensure they are consistent with health and safety standards Perform maintenance of electrical systems (replace light bulbs and sockets, clean and repair circuit breaker panels etc.) Assist in the setup of ventilation, refrigeration and other systems and conduct repairs when necessary Maintain heating and plumbing systems to ensure functionality Inspect alarm systems (fire, protection) and schedule repairs when needed Perform manual repairs when necessary (fix locks, replace windows etc.) Undertake activities of pest control such as spraying insecticide Conduct general upkeep procedures (e.g. landscaping) and other tasks as assigned (painting, carpentry etc.) Assist in budget preparation and ensure it is followed Requirements Proven experience as maintenance technician Basic understanding of electrical, hydraulic and other systems Knowledge of general maintenance processes and methods Working knowledge of tools, common appliances and devices Manual dexterity and problem-solving skills Good physical condition and strength with a willingness to work overtime High school diploma or equivalent; Certificate in HVAC, building maintenance technology or relevant field will be a plus Certified Maintenance and Reliability Professional (CMRP) is desired Experience = 0-3 years Responsible for performing general maintenance and building maintenance tasks, as well as performing inspections, services, repairs and overhauls on equipment and facilities; installing new equipment and systems as assigned; carrying out routine and specific assignments to ensure the site and assigned equipment are in safe operating condition and are in compliance with Health, Safety and Environmental requirements. Qualifications: 7:30 AM to 4:00 PM Shift M-F High School diploma or GED equivalent, comprehensive knowledge of general maintenance, repair, and safety procedures is required, trade school or vocational background is preferred