Numerical Control Operator jobs at Peter Paul Electronics

Sets-up and operates CNC Milling Machines to produce highly precision component parts that meet all quality standards. At HORST we offer a variety of benefits including but not limited to: Competitive PTO Package Paid Company Holidays 401K Match Program Medical, Dental, Vision Benefits Tuition Reimbursement/Assistance Program Major Areas of Responsibility: Set-up and operate Milling machines (Feeler, Robodrill, and Hass platforms Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part. Checks to make sure that the material to be used meets all specifications. Obtains bar stock or material from staging area. Performs complex set-ups of own work or for others. Makes all required adjustments to the machinery. Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program. Edits the program as necessary. Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators. Ensures that all manufactured parts are in full compliance with quality standards. Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department. Replaces all worn or damaged tooling as necessary. Verifies and records actual part count, both prior to and upon completion of all work Performs all routine maintenance on the equipment and maintains all fluid levels. Keeps the equipment and work area clean and organized. Returns excess bar stock or material to the staging area. Moves the finished work to an assigned area. Enters all work performed into the database and documents all scrap. Notifies lead person or supervisor of any parts shortages or machining problems/difficulties. Packs and washes/preserves parts as needed. Performs other machining and assembly operations as needed. Performs other related duties as required, ability to flex into other departments as needed. Interacts with associates from all departments. Requirements: High School diploma or equivalent. Technical school training a plus. 3 years of set-up experience minimum required Experience with aerospace products and/or other close tolerance parts is a plus. Ability to set up and operate lathe machines is a plus, as flexing into that area is possible. Must be familiar with Fanuc controls. Must be able to set and change tools. Must be able to use standard gauges and inspection techniques. Experience with SPC, inspection documentation, and problem solving is a plus. Strong interpersonal and analytical skills. Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork. Must be able to read CNC programs. Five plus years of increasingly diverse experience in a machine shop or CNC machining environment Physical Requirements: Ability to push/pull/carry up to 50 lbs. Able to stand for up to 8+ hours. PI82c07f8bf3a0-31181-38537267

Job Title: CNC Operator Department: Manufacturing Reports To: Production Manager Shift: Second Shift 1:00PM -11:00PM Monday through Thursday About the Role: As a CNC Machinist 1 at Micro Precision, you will play a crucial role in the production of high-quality precision components. Your primary responsibility will be to operate CNC machines, ensuring that all parts are manufactured to exact specifications and tolerances. You will be expected to interpret technical drawings and blueprints, translating them into precise machining operations. Additionally, you will monitor the machining process, making adjustments as necessary to maintain quality and efficiency. Ultimately, your work will contribute to the overall success of our manufacturing operations and the satisfaction of our clients. Required Qualifications: US Citizenship is required per DoD requirements Minimum Qualifications: High school diploma or equivalent. Basic understanding of CNC machining processes and equipment. Ability to read and interpret technical drawings and blueprints. Familiarity with measuring tools and equipment, such as calipers and micrometers. Strong attention to detail and commitment to quality. Preferred Qualifications: Technical degree or certification in CNC machining or a related field. Previous experience operating CNC machines in a manufacturing environment. Knowledge of programming CNC machines using G-code or similar languages. Experience with quality control processes and inspection techniques. Ability to work collaboratively in a team-oriented environment. Responsibilities: Set up and operate CNC machines according to established procedures and specifications. Read and interpret technical drawings, blueprints, and work orders to determine machining operations. Monitor machine operations and make adjustments to maintain quality and efficiency. Perform routine maintenance on machines and troubleshoot any issues that arise during production. Maintain accurate records of production data, including quantities produced and any defects encountered. Other duties as responsibilities necessitate Skills: The required skills for this position, such as understanding CNC machining processes and reading technical drawings, are essential for executing daily tasks effectively. Attention to detail is critical, as it ensures that all components meet the specified tolerances and quality standards. Familiarity with measuring tools allows you to verify the accuracy of machined parts, which is vital for maintaining production quality. Preferred skills, such as programming knowledge, enhance your ability to optimize machine operations and improve efficiency. Overall, a combination of these skills will enable you to contribute significantly to the success of our manufacturing team. Salary: $20 to $34 per hour, dependent on qualifications and experience Job Type: Full-time Schedule: 10-hour shift, Night shift, Monday to Thursday Benefits: 401(k) 401(k) matching Health insurance Vision insurance Dental insurance Life insurance Flexible schedule Employee assistance program Paid time off Referral program Tuition reimbursement

Job SummaryConducts and operates computer numeric controlled (CNC) equipment for an organization.Job Description CNC Operator - Metals Schedule: Monday-Friday, 2nd Shift Pay: $26-$32 per hour plus .50 shift premium for 2nd shift We're seeking a skilled CNC Operator to work directly on the warehouse floor, operating heavy machinery and delivering high-quality results. If you have a sharp eye for detail and a passion for machining excellence, this is your opportunity to thrive in a dynamic, hands-on role. Key Accountabilities: Perform precision tool machining by monitoring feed rates, speeds, and specialized instruments. Conduct inspections using calipers, micrometers, gauges, indicators, and scales to ensure accuracy. Troubleshoot machine malfunctions by editing specifications and performing maintenance. Execute preventative maintenance routines, keeping workspaces clean and safe. Meet production goals for cycle time, quantity, and quality to support machining excellence. Interpret blueprints, dimensions, machine instructions, and project guidelines. May apply working knowledge of CNC programming to meet specific parameters and calculations. Work under general supervision, handling moderately complex issues and escalating when needed. Demonstrate solid working knowledge of machining and fabrication processes. May mentor or coach junior team members to support development and team success. Operate in a warehouse environment around heavy machinery, adhering to safety protocols. Uphold TKMNA Employee Attributes and Competencies in daily performance. What You Bring: Experience in CNC machining, preferably in a metals-focused environment. Strong mechanical aptitude and attention to detail. Ability to read and interpret technical drawings and specifications. Commitment to safety, quality, and continuous improvement. Dependable work ethic and ability to work independently on 2nd shift. Why Join Us? • Competitive pay and benefits. • Supportive team culture and opportunities for growth. • Work with advanced manufacturing technology in a clean, safety-focused facility. Ready to make precision your profession? Apply today and be part of a team that shapes the future! The above is intended to describe the general content of and requirement for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements. This position has been identified as “safety sensitive” by thyssenkrupp under applicable laws. Accordingly, any application for this position that is considered for employment with thyssenkrupp requires successful completion of pre-employment drug testing, which may include testing for marijuana in accordance with any applicable federal, state, and local laws. Job Compensation$24.68 - $33.41Benefits Overview We offer competitive company benefits to eligible positions, such as: Medical, Dental, Vision Insurance Life Insurance and Disability Voluntary Wellness Programs 401(k) or RRSP programs with Company Match Paid Vacation and Holidays Tuition Reimbursement And more! Benefits may vary based on job, country, union role, and/or company segment. Please work with your recruiter or tk representative for applicable benefits information. Disclaimer This is to notify the general public that some individuals/entities are using the thyssenkrupp (“TK”) name, trademark, domain name, and logo without authorization. They are posing as employees, representatives, or agents of TK and its associated/group companies. These individuals/entities are fraudulently offering jobs online through texts, websites, telephone calls, emails, or by issuing fake offer letters. They are also soliciting jobseekers to deposit money in certain bank accounts or providing jobseekers with fraudulent checks to obtain banking information. TK does not ask, solicit, or accept any monies in any form from candidates, job applicants, or potential jobseekers, who have applied to or wish to apply to TK, whether online or otherwise as a pre-employment requirement. TK bears no responsibility for money being deposited/withdrawn therefrom in response to such fake offers. TK does not: 1. Send job offers from free email services like Gmail, Rediffmail, Yahoo mail, etc.; 2. Request payment of any kind from prospective jobseekers or candidates for employment; 3. Authorize anyone to collect money or agree to any monetary arrangement in return for a job at TK; 4. Send checks to job seekers; or 5. Make job offers through third parties. In the event TK uses professional recruitment services through a third party, offers are always made directly by TK and not by any third parties. PLEASE NOTE: 1. TK strongly recommends that potential jobseekers do not respond to such fake solicitations, in any manner; 2. TK will not be responsible to anyone acting on an employment offer that is not directly made by TK; 3. Anyone making an employment offer in return for money is not authorized by TK; and 4. TK reserves the right to take legal action, including criminal action, against such individuals/entities. TK follows a formal recruitment process through its own HR department and applications are evaluated by its HR department through pre-defined processes. Please visit our official careers website at ******************************** to view authentic job openings at TK. If you receive any unauthorized, suspicious, or fraudulent offers or interview calls, please email us at **********************************************. We shall not accept any liability towards the representation made in any fraudulent communication or its consequences, and such fraudulent communication shall not be treated as any kind of offer or representation by TK or its group companies and affiliates.

Job SummaryConducts and operates computer numeric controlled (CNC) equipment for an organization.Job Description 3rd shift paying $26-$30 per hour plus $1.50 shift premium for midnights. Key Accountabilities: Performs precision tool machining operations through monitoring feed rates, speed, and special instruments. Conducts inspections through the utilization of measuring instruments that provide for accuracy. Uses calipers, micrometers, gauges, indicators, and scales. Troubleshoots malfunctions by editing specifications and ensuring maintenance of machines. Continuously performs preventative maintenance, which includes cleaning and maintaining safe workspaces. Meets the organizational production goals including cycle time, quantity, and quality to enhance machining excellence. Utilizes blueprints and dimensions, machine instructions, and special project guidelines. May have working knowledge of programming CNC machines to ensure proper calculations, parameters, and other conditional requirements are met. Performs work under general supervision. Handles moderately complex issues and problems, and refers more complex issues to higher-level staff. Possesses solid working knowledge of subject matter. May provide leadership, coaching, and/or mentoring to a subordinate group This is a position that works directly on the warehouse floor on or around heavy machinery. Meets TKMNA Employee Attributes / Competencies Minimum Requirements: High School Diploma or equivalent 2 to 4 years' experience in a related position Ability to read and write and perform basic math skills Ability to lift and carry up to 40 lbs. Safety Mindset Preferred Requirements: Accreditation from a technical school or an applicable skills trades program Previous warehouse experience - especially in the metals industry Previous forklift experience Use of handheld measuring tools Computer literate. The above is intended to describe the general content of and requirement for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements. This position has been identified as “safety sensitive” by thyssenkrupp under applicable laws. Accordingly, any application for this position that is considered for employment with thyssenkrupp requires successful completion of pre-employment drug testing, which may include testing for marijuana in accordance with any applicable federal, state, and local laws. Job Compensation$23.97 - $32.44Benefits Overview We offer competitive company benefits to eligible positions, such as: Medical, Dental, Vision Insurance Life Insurance and Disability Voluntary Wellness Programs 401(k) or RRSP programs with Company Match Paid Vacation and Holidays Tuition Reimbursement And more! Benefits may vary based on job, country, union role, and/or company segment. Please work with your recruiter or tk representative for applicable benefits information. Disclaimer This is to notify the general public that some individuals/entities are using the thyssenkrupp (“TK”) name, trademark, domain name, and logo without authorization. They are posing as employees, representatives, or agents of TK and its associated/group companies. These individuals/entities are fraudulently offering jobs online through texts, websites, telephone calls, emails, or by issuing fake offer letters. They are also soliciting jobseekers to deposit money in certain bank accounts or providing jobseekers with fraudulent checks to obtain banking information. TK does not ask, solicit, or accept any monies in any form from candidates, job applicants, or potential jobseekers, who have applied to or wish to apply to TK, whether online or otherwise as a pre-employment requirement. TK bears no responsibility for money being deposited/withdrawn therefrom in response to such fake offers. TK does not: 1. Send job offers from free email services like Gmail, Rediffmail, Yahoo mail, etc.; 2. Request payment of any kind from prospective jobseekers or candidates for employment; 3. Authorize anyone to collect money or agree to any monetary arrangement in return for a job at TK; 4. Send checks to job seekers; or 5. Make job offers through third parties. In the event TK uses professional recruitment services through a third party, offers are always made directly by TK and not by any third parties. PLEASE NOTE: 1. TK strongly recommends that potential jobseekers do not respond to such fake solicitations, in any manner; 2. TK will not be responsible to anyone acting on an employment offer that is not directly made by TK; 3. Anyone making an employment offer in return for money is not authorized by TK; and 4. TK reserves the right to take legal action, including criminal action, against such individuals/entities. TK follows a formal recruitment process through its own HR department and applications are evaluated by its HR department through pre-defined processes. Please visit our official careers website at ******************************** to view authentic job openings at TK. If you receive any unauthorized, suspicious, or fraudulent offers or interview calls, please email us at **********************************************. We shall not accept any liability towards the representation made in any fraudulent communication or its consequences, and such fraudulent communication shall not be treated as any kind of offer or representation by TK or its group companies and affiliates.

Department: Production This position is responsible for setting up and operating CNC machines to machine metal, cast aluminum, or plastics parts as needed. * Scan manufacturing orders for labor and machine time reporting. * Follow oral and written instructions while using close vision to read and interpret CAD drawings and manufacturing orders. Locate suitable CNC Code (or "program") and transfer from the storage location to CNC machine and modify program as needed to meet final machining conditions and inspection tolerances. * Prepare and pre-set all tools needed for machining operations from machine set-up sheets. Assemble cutting tools into tool holders and position tool holders into the machine tool changer. * Perform first piece measurements and periodic quality checks as prescribed by the process documentation. Demonstrate accuracy and thoroughness, look for ways to improve and promote quality, and offer ideas to improve machine performance. To view the full job description and apply for this position, click on the button below.

Department: Production Job Title: CNC Lathe Operator Summary: This position is responsible for setting up and operating CNC machines to machine metal, cast aluminum, or plastics parts as needed. Essential Function of the Job: The essential functions of this job require the person, with our without reasonable accommodations, to perform the following: * Scan manufacturing orders for labor and machine time reporting. * Follow oral and written instructions while using close vision to read and interpret CAD drawings and manufacturing orders. Locate suitable CNC Code (or "program") and transfer from the storage location to CNC machine and modify program as needed to meet final machining conditions and inspection tolerances. * Prepare and pre-set all tools needed for machining operations from machine set-up sheets. Assemble cutting tools into tool holders and position tool holders into the machine tool changer. * Lift or move up to 25 pounds to load tools and workpieces into the machine. * Perform first piece measurements and periodic quality checks as prescribed by the process documentation. Demonstrate accuracy and thoroughness, look for ways to improve and promote quality, and offer ideas to improve machine performance. * Stop machine to change cutting tools and set-up according to required machining sequence or to measure parts for conformance to blueprint specifications. * Identify program and specification errors and discuss them with Supervision or programming personnel to resolve these and all other problems in a timely manner. * Perform basic math functions and use MRP software to complete required inspection documentation. * Use mechanical ability and machine checklist to perform minor corrective and preventive maintenance on machines. * Maintain a clean work area. * Balance team and individual responsibilities, establish and maintain positive working relationships, contribute to building a positive team spirit and support everyone's efforts to succeed. * Observe all safety and security procedures, report potential unsafe conditions and use equipment and materials properly. * Perform all other duties as assigned. Recommended Education and/or Experience High School Diploma or Equivalent; or minimum three years related CNC Lathe operating experience. All Employees are expected to: * Follow the Employee Handbook policies and procedures and uphold organizational values. * Contribute to building a positive work environment. * Report for work consistently and on time. * Report to supervision conditions or practices that are unsafe to ebm-papst and its employees.

At Ensign-Bickford Aerospace & Defense Company (EBAD), we believe that our strengths are built on our most important resource - our people. Join EBAD and you'll be a part of a team who creates cutting edge technology that will blast us into the future. No other company can match the innovative energetic solutions that we provide. At EBAD you will actively contribute to successful missions putting men, women and satellites into space, and protecting our armed service men and women around the world. If this is the culture and work environment you are seeking, then EBAD is the place for you! Job Description EBAD seeks a qualified candidate for the position CNC Machinist, reporting to the Machine Shop Supervisor. The position is located in Simsbury, CT. The CNC Machinist is responsible for fabricating precision-machined parts by setting up and operating CNC and manual mills and lathes. Equipment is Haas UMC-750 CNC 5-Axis Mill, Hardinge Bridgeport V480 3 axis mill, TRAK TMC7 mill, ST-25Y CNC Turret Lathe, Okuma L2000e 2 axis lathe , Babin TML-5C Manual Lathe and Bridgeport Manual 3-Axis Mill. Responsibilities: Complete tool, fixture, and material setup on CNC mill and lathe. Running first piece article ready for inspection. Verifying parts by using precision measuring equipment. Changing tools and offsets based on cutting conditions. Using proper methodology and cutting tools to produce quality parts that adhere to production and quality standards. Using proper feed, speed, and other cutting parameters based on work piece matls such as aluminum, steel, stainless steel, titanium, etc. Other similar or related duties as required. Requirements: Must have experience running 5 axis machinery. Minimum 5 years' experience in CNC operation with setup experience. General knowledge of GD&T, blueprint reading and inspection tools Must possess excellent verbal and written communication skills. Minimum High school education or equivalent. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to communicate with others effectively in both written and verbal fashion. Must be able to meet all ITAR and BATFE background requirements Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status.

This opportunity is located within our Ensign-Bickford Aerospace & Defense Company business, a global leader of mission-critical hardware and systems solutions including precision energetics systems and innovative explosive solutions.Click here to learn more. Job Description EBAD seeks a qualified candidate for the position CNC Machinist, reporting to the Machine Shop Supervisor. The position is located in Simsbury, CT. The CNC Machinist is responsible for fabricating precision-machined parts by setting up and operating CNC and manual mills and lathes. Equipment is Haas UMC-750 CNC 5-Axis Mill, Hardinge Bridgeport V480 3 axis mill, TRAK TMC7 mill, ST-25Y CNC Turret Lathe, Okuma L2000e 2 axis lathe , Babin TML-5C Manual Lathe and Bridgeport Manual 3-Axis Mill. Responsibilities: Complete tool, fixture, and material setup on CNC mill and lathe. Running first piece article ready for inspection. Verifying parts by using precision measuring equipment. Changing tools and offsets based on cutting conditions. Using proper methodology and cutting tools to produce quality parts that adhere to production and quality standards. Using proper feed, speed, and other cutting parameters based on work piece matls such as aluminum, steel, stainless steel, titanium, etc. Other similar or related duties as required. Requirements: Must have experience running 5 axis machinery. Minimum 5 years' experience in CNC operation with setup experience. General knowledge of GD&T, blueprint reading and inspection tools Must possess excellent verbal and written communication skills. Minimum High school education or equivalent. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to communicate with others effectively in both written and verbal fashion. Must be able to meet all ITAR and BATFE background requirements Ensign-Bickford Aerospace & Defense Company is an Equal Opportunity Employer (EOE). Qualified applicants are considered for employment without regard to race, religion, color, sex, age, disability, sexual orientation, genetic information, national origin, or veteran status.

Job Title: Lead CNC Machinist Company: Biomerics Position Type: Full-time Employee Hourly Rate: $25.00 - $40.00, depending on experience. CNC Machinist (Willemin) 2nd and weekend shift available. Second shift hours- 5AM-1PM Weekend shift - Flexible Competitive Salary & Benefits Biomerics provides contract manufacturing, laser processing, and finishing services to a wide range of industries with a strong commitment to customer service. Biomerics specializes in the most challenging machined and micromachined components, including those used in interventional and medical robotics applications. We pride ourselves on providing a supportive, positive work environment with opportunities for challenge and growth. Biomerics offers Swiss machining with integrated laser cutting on precision medical tubing. Laser/Swiss machining enables features to be machined and laser cut in the same process. Our core competency lies in smaller medical components, produced with high accuracy and repeatability. Traditional Swiss screw machining capability is also available for rapid prototyping and production. In addition, Biomerics utilizes five axis milling machines capable of producing complex finished components, while holding extremely tight tolerances. Job Description: Biomerics has immediate openings for talented CNC Machine Operator at our facility in Monroe, CT. Working in a team environment, this individual will ensure that automated manufacturing processes are producing optimal results. Representative Responsibilities: Prepare and operate machines to perform tasks such as drilling, grinding, milling etc. Understand specifications of the task at hand and the desired result by reading blueprints, mechanical drawings etc. Translate instructions into computer commands so the machines can perform the correct function. Prepare and load raw materials onto the machines. Set up and run first pieces to verify that the machines produce outputs according to specifications. Supervise the machines while they execute the tasks and make any necessary adjustments to produce a better result. Inspect and measure finished products and compare them with requirements to determine if the process has been completed properly. Requirements Desired Skills, Talent, and Qualifications: Knowledge of machine shop equipment and practice, (actual machining experience a plus) Hands-on experience with assembly, debug, and troubleshooting Previous experience working in a manufacturing setting is preferred but willing to train the right candidate. Must have strong attention to detail. Familiarity and skill with interpreting technical drawings and blueprints Ability to work independently and closely follow directions is essential Ability to run multiple machines during the shift "Equal Opportunity Employer: Minority, Female, Protected Veteran, Individual with Disabilities are encouraged to apply." Benefits: Medical/Dental/Vision Insurance, Short-Term Disability, Long-Term Disability, Life Insurance, Paid Vacation Days, Paid Holidays, 401k Please, No Recruitment Agency calls or emails (we are not using recruitment services for this, or any other role posted). Biomerics does not accept non-solicited resumes or candidate submittals from search/recruiting agencies not already on Biomerics approved agency list. Unsolicited resumes or candidate information submitted to Biomerics by search/recruiting agencies not already on Biomerics approved agency list shall become the property of Biomerics and if Biomerics subsequently hire the candidate, Biomerics shall not owe any fee to the submitting agency. The salary estimates are estimates from this job board and not a guarantee from Biomerics salary range. Salary Description $25-$40

Pay: From $55.00 per hour We are seeking an experienced CNC Programmer to join our manufacturing team. The ideal candidate will be responsible for developing, testing, and optimizing CNC programs for various machining operations, ensuring precision and efficiency. This role requires a strong background in Mastercam, blueprint reading, and mechanical knowledge to produce high-quality components using CNC milling machines and lathes. The CNC Programmer will collaborate with engineering and production teams to improve manufacturing processes and maintain strict quality standards. Responsibilities Develop and write CNC programs for milling machines, lathes, and other CNC equipment using Mastercam Interpret blueprints, schematics, and technical drawings to determine machining requirements. Optimize machining processes through lean manufacturing principles to improve efficiency and reduce waste. Troubleshoot machining issues related to tooling, geometry, or machine performance; make necessary adjustments. Maintain detailed documentation of programs, setups, and process improvements. Collaborate with engineering to implement design changes using CAD software Ensure compliance with safety standards and proper use of tooling and machining equipment. Skills Proficiency in CNC programming languages, Mastercam preferred Strong knowledge of blueprint reading, GD&T (Geometric Dimensioning & Tolerancing), schematics, and technical drawings. Familiarity with machining processes such as CNC milling, CNC lathe operations, electrical discharge machining (EDM), and tooling selection. Mechanical aptitude with understanding of tooling setups, geometry calculations, and precision measuring instruments like bore gauges, micrometers, calipers, micrometers, and coordinate measuring machines (CMM). Knowledge of lean manufacturing principles to enhance productivity. Strong math skills relevant to machining tolerances and geometric calculations. This position offers an opportunity to work in a dynamic manufacturing environment where technical expertise is valued. Candidates should possess a strong mechanical background combined with advanced programming skills to contribute effectively to our production goals.

Essential Duties and Responsibilities include the following. Other duties may be assigned. Interprets blueprints, sketches, drawings, manuals, specifications, routing, inspection and setup requirements. Selects, aligns, and secures holding fixtures and accessories on machines. Selects, aligns, and secures cutting tools into tool holders and then installs tool assemblies on machines. Loads and secures raw material on machine. For manual operations, calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut. For CNC operations, retrieves current revision machine control program and downloads to machine. Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls as required. Unloads finished machined part from machine and deburrs as necessary to perform quality checks. Verifies conformance of finished workpiece to specifications manually or through the use of a CMM / DCC-CMM. Enters required data into quality documentation and signs as required. Performs daily housekeeping and maintenance on assigned machine, auxiliary equipment, tooling and work area. Confers with engineers, programmers, inspectors, or maintenance personnel to resolve machining or assembly problems. Competency: To perform the job successfully, an individual should demonstrate the following competencies: Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly. Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: High school diploma or general education degree (GED); VoTech Trade school graduate preferred. Completed a machining related apprenticeship program or 3-5 years equivalent combination of education and experience. Experience setting up and operating Mill Turn B-axis Twin Spindle Machines and Citizen multi-axis lathes Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to present numerical data effectively and write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Math Ability: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to compute rate, ratio, and percent and to interpret bar graphs Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations. Computer Skills: Possess Basic Computer skills. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to work near moving mechanical parts. The noise level in the work environment is usually moderate. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is frequently required to walk and reach with hands and arms. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision and Depth perception. ADDITIONAL NOTES ARCH Global Holdings is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ARCH Global Holdings are employed on an at-will basis. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

CNC Machinist 2 - Non-Exempt Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight-critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Plan and perform various CNC turning and milling operations to machine a variety of metal parts under the supervision of the Operations Manager. Location: East Windsor, CT Reports to: Production Supervisor Essential Duties & Responsibilities Reasonable accommodations may be made to enable individuals with disabilities to perform. Machine parts to specifications using machine tools such as lathes and milling machines Work from blueprints, engineering instructions, specifications, and blueprints Measure, examine, and test completed units to detect defects and ensure conformance to specifications, using precision instruments such as micrometers. Set up, adjust, and operate all of the basic machine tools and many specialized tools in order to perform precision machining operations Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines Select appropriate tools, machines, and materials to be used in the preparation of machine work Check part to ensure that they are properly lubricated and cooled Operate equipment to verify operational efficiency Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter Maintain records and documents in-process inspection data as required Report faulty or unusual conditions to the appropriate level of supervision Able to measure using standard shop tools, machine tools, and engineered gaging to close established tolerances Adhere to standards of safety and housekeeping standards Operate and measure machine Performs other related duties or responsibilities as requested or required, whether or not specifically mentioned in this job description. Participate in training as required 5-10% Domestic Travel required Physical Demands : Must be able to lift, push, or pull at least 35 lbs. Regularly required to sit, stand, reach, bend, and move about our facility Requirements: Must be a “US Person” as defined by US Government and able to work without restriction with ITAR related data. High School Diploma or GED required Precision Manufacturing certificate preferred Must be able to read, write, understand, and speak English at a functional level Basic reading, writing, and some advanced arithmetic skills Ability to read and understand engineering work instructions Some ability to set up and operate CNC turning and milling machines Basic knowledge of appropriate speeds and feeds for materials and tools Working knowledge of Machine codes, G codes AAP Statement Hanwha Aerospace USA, is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. *Subject to change with or without notice*

This Grinding Set-Up Operator/Machinist will primarily set-up and operate CNC cylindrical (O.D) grinders (e.g. Kellenberger, Studer, etc.) to produce high precision parts made from a variety of materials. In this role, you will ensure that all manufactured parts are in full compliance with quality standards and customer specifications. Major Areas of Responsibility: The setup and operation of CNC cylindrical grinders (e.g. Kellenberger, Studer, Jones & Shipman, Hauser, Clausing, etc.) Working from blueprints, operation sheets, travelers or other specifications, this person sets-up and completes the machining operations to produce high precision parts. Performs complex setups including fixturing, wheel selection, and dressing, for self and others. Operates equipment as needed. Creates CNC programs on the machine and edits programs as necessary. Selects grinding wheels, tooling, gages, and other equipment as needed. Assists other Operators with setup or production problems. Ensures that all manufactured parts are in full compliance with quality standards. Uses measuring instruments and gages to perform dimensional and visual inspections on close tolerance parts. Performs all routine maintenance on the equipment. Performs other related duties as required, including centerless grinding (in-feed and thru-feed) on equipment such as Cincinnati and Royal Master grinders. Packs and cleans parts as needed. Performs other machining and assembly operations as needed. Requirements: High School diploma or equivalent. Technical school training a plus. Five plus years of increasingly diverse experience in a machine shop or CNC machining environment Ability to set up CNC cylindrical grinders (e.g. Kellenberger, Studer, etc.) Experience with centerless grinding (Cincinnati, Royal Master, etc.), pinch-peel grinding (e.g. Rollomatic, ANCA, etc.) is a plus. Experience with manual cylindrical grinders (e.g. Brown & Sharpe, etc.) is a plus. Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork. Physical Requirements: Ability to push/pull/carry up to 50 lbs. Able to stand for up to 8+ hours

Sets-up and operates CNC Turning, Multi-Axis lathes, and other Turning equipment to produce highly precision component parts that meet all quality standards. This role is 100% in office at our plant in East Hartford, CT. At HORST we offer a variety of benefits including but not limited to: Competitive PTO Package Paid Company Holidays 401K Match Program Medical, Dental, Vision Benefits Tuition Reimbursement/Assistance Program Major Areas of Responsibility: Set-up and operate CNC Lathes (2-axis and multi-axis) (e.g. Eurotech, Hardinge, etc.) Will work with blueprints, operation sheets, and other work instructions. Working from blueprints, operation sheets, travelers or other specifications, set-ups and completes the machining operations to produce a quality part. Checks to make sure that the material to be used meets all specifications. Obtains bar stock or material from staging area. Performs complex set-ups of own work or for others. Makes all required adjustments to the machinery. Obtains tooling, gages, inserts and all other equipment needed to complete the set-up and brings up the program. Edits the program as necessary. Assists other Operators or Set-up/Operators with set-up or production problems and helps to train other set-up/operators. Ensures that all manufactured parts are in full compliance to quality standards. Performs visual inspections (part relationship to operation sheet/blueprint configuration) on all parts produced and performs actual dimensional verification using measuring instruments as per the guidelines established by the department or the Quality Assurance Department. Replaces all worn or damaged tooling as necessary. Verifies and records actual part count, both prior to and upon completion of all work Performs all routine maintenance on the equipment and maintains all fluid levels. Keeps the equipment and work area clean and organized. Returns excess bar stock or material to the staging area. Moves the finished work to an assigned area. Enters all work performed into the database and documents all scrap. Notifies lead person or supervisor of any parts shortages or machining problems/difficulties. Packs and washes/preserves parts as needed. Performs other machining and assembly operations as needed. Performs other related duties as required. Interacts with associates from all departments. Requirements: High School diploma or equivalent. Technical school training a plus. 3 years of set-up experience minimum required Experience with aerospace products and/or other close tolerance parts is a plus. Must be familiar with Fanuc and/or Okuma Controls Must be able to set and change tools. Must be able to use standard gauges and inspection techniques. Experience with SPC, inspection documentation, and problem solving is a plus. Strong interpersonal and analytical skills. Must be able to read and write comments, understand operation sheets/blueprints, specifications, and all applicable company/customer paperwork. Must be able to read CNC programs. Five plus years of increasingly diverse experience in a machine shop or CNC machining environment Physical Requirements: Ability to push/pull/carry up to 50 lbs. Able to stand for up to 8+ hours.

The 2nd Shift Production Supervisor leads a multi-department team of CNC Operators and Set-Up Operators, in a high mix / low volume aerospace component manufacturing environment. This role is expected to balance expertise in set-up and operation of CNC machining for precision tolerance components, along with strong interpersonal skills to motivate the team to work toward common goals and objectives. Key responsibilities include managing the day-to-day priorities for multiple departments, cross-training staff on best practices to meet set-up and production run-times, optimizing processes through the elimination of waste, and leading lean continuous improvement initiatives. As a working supervisor, this role is expected to run production jobs and provide the necessary supervisory management to a small 2nd shift team. This role is 100% in office at our plant in East Hartford, CT. At HORST we offer a variety of benefits including but not limited to: Competitive PTO Package Paid Company Holidays 401K Match Program Medical, Dental, Vision Benefits Tuition Reimbursement/Assistance Program Essential Job Duties: Conduct security, quality and EH&S audits to ensure the safety of employees on the second shift, and compliance with company and customer policies. Coordinate time-off requests, with attention to skills matrix, to ensure adequate staffing level across all disciplines of machine centers to meet production needs. Motivate team to meet daily, weekly and monthly goals and objectives. Identify waste and non-value-added tasks that interfere with objectives. Routinely measure, monitor, and publish the performance of all individuals on the team. Compare results against department standards. Complete periodic performance evaluations, and correct any issues in real time as needed, up to and including, disciplinary actions if needed. Host a daily GEMBA walk and serve as the primary conduit for all communications between operators and cross functional teams. Attend production meetings, and quality clinic/MRB meetings as needed. Collaborate with engineering, purchasing, production and sales teams to drive open issues to rapid closure. Partner with production control to stage daily and weekly priorities. Ensure jobs are completed on time, and productivity is sustained. Expedite jobs as necessary. Set-up and operate CNC machines according to operation sheet instructions. Provide technical support for team. Maintain ERP data integrity ensuring job punches match traveler package. Report any discrepancies that could impact job quantity or delivery. Develop and author standard work for the operation of production equipment. Coach and train teammates in best practices, enforcing safety, departmental and QMS polices, with the goal of process improvement, reduction in set up time, faster productivity rates, and improved quality. Experience & Skills: Minimum of 10 years progressive career in the manufacturing of precision machined components in a regulated industry such as aerospace or medical. Previous experience in a high mix, low volume shop with an emphasis on lean manufacturing preferred. Working knowledge of ISO/AS quality standards, basic OSHA/EHS safety regulations, and a commitment to adherence of company policies. Advanced or expert machining skills in 1 or more disciplines. Swiss lathe, multi-axis turning, turning, milling, or grinding. Must be able to independently set-up and operate CNC equipment and provide the necessary training to others on shift. Experience leading and managing a small team toward common goals. An effective communicator that can build rapport with a diverse team. Previous team lead experience preferred. A willingness to take accountability for self and team, driving and inheriting the collective results of a department or team. High degree of urgency to drive operations at full speed. Keen sense of attention to detail to understand how to work with pace, not haste, avoiding careless mistakes. Strong understanding of operational metrics such as first past yield, efficiency, WIP aging, on-time-delivery, job cost, scrap rate, etc. Strong computer skills especially related to navigating ERP systems, job clocking systems, CAD/CAM software, and Microsoft products such Outlooks, Excel, PowerPoint, etc. Previous experience with EPICOR a plus. Physical Demands: Legend N (Not applicable) Activity is not applicable to this position O (Occasionally) Position requires this activity up to 33% of the time (0-2.5 hours/day) F (Frequently) Position requires this activity up to 66% of the time (2.5-5.5 hours/day) C (Constantly) Position requires this activity more than 66% of the time (5.5+ hours/day) Lift/Carry 10-30lbs F Stand F Walk F Manually manipulate F Squat or kneel O Bend O Reach above shoulder O

Job Title: CNC Operator Department: Manufacturing Reports To: Production Manager Shift: First and Second Available About the Role: As a CNC Machinist 1 at Micro Precision, you will play a crucial role in the production of high-quality precision components. Your primary responsibility will be to operate CNC machines, ensuring that all parts are manufactured to exact specifications and tolerances. You will be expected to interpret technical drawings and blueprints, translating them into precise machining operations. Additionally, you will monitor the machining process, making adjustments as necessary to maintain quality and efficiency. Ultimately, your work will contribute to the overall success of our manufacturing operations and the satisfaction of our clients. Required Qualifications: US Citizenship is required per DoD requirements Minimum Qualifications: High school diploma or equivalent. Basic understanding of CNC machining processes and equipment. Ability to read and interpret technical drawings and blueprints. Familiarity with measuring tools and equipment, such as calipers and micrometers. Strong attention to detail and commitment to quality. Preferred Qualifications: Technical degree or certification in CNC machining or a related field. Previous experience operating CNC machines in a manufacturing environment. Knowledge of programming CNC machines using G-code or similar languages. Experience with quality control processes and inspection techniques. Ability to work collaboratively in a team-oriented environment. Responsibilities: Set up and operate CNC machines according to established procedures and specifications. Read and interpret technical drawings, blueprints, and work orders to determine machining operations. Monitor machine operations and make adjustments to maintain quality and efficiency. Perform routine maintenance on machines and troubleshoot any issues that arise during production. Maintain accurate records of production data, including quantities produced and any defects encountered. Other duties as responsibilities necessitate Skills: The required skills for this position, such as understanding CNC machining processes and reading technical drawings, are essential for executing daily tasks effectively. Attention to detail is critical, as it ensures that all components meet the specified tolerances and quality standards. Familiarity with measuring tools allows you to verify the accuracy of machined parts, which is vital for maintaining production quality. Preferred skills, such as programming knowledge, enhance your ability to optimize machine operations and improve efficiency. Overall, a combination of these skills will enable you to contribute significantly to the success of our manufacturing team. Benefits: 401(k) 401(k) matching Health insurance Vision insurance Dental insurance Life insurance Flexible schedule Employee assistance program Paid time off Referral program Tuition reimbursement

Core Responsibilities Develop CNC programs using NX CAM software for various machining equipment, including lathes and multi-axis milling machines. Create, verify, and optimize machining strategies to meet production schedules and quality standards. Select appropriate tooling and assist in troubleshooting manufacturing and machining challenges. Monitor production operations to ensure accuracy, efficiency, and adherence to specifications. Work with a wide range of metal materials, including high-strength alloys and stainless steels. Operate and program machines equipped with advanced control systems and multi-axis capabilities. Qualifications Minimum 3 years of experience in a manufacturing or precision machining environment. Proficiency in NX CAM is a must. Strong understanding of CNC machining processes and toolpath optimization. Experience with CAM verification software (training available for candidates proficient in other systems). Ability to read and interpret complex technical drawings and blueprints. Proven ability to perform efficiently in a fast-paced, team-oriented setting. Excellent communication skills and attention to detail. Ability to collect and analyze cost and process data for estimating purposes. Proficient in Microsoft Office; experience with 3D CAD modeling tools such as SolidWorks is a plus.

Job Title: CNC Machinist 1 Exempt Status: Non-Exempt : Hanwha Aerospace USA has long been recognized as a leader in the development and supply of flight critical Aerospace/Defense components and assemblies. Operating out of four state-of-the-art facilities located in Connecticut, Hanwha Aerospace USA offers growth and career development opportunities to enrich your talents. Summary: Plan and perform various CNC turning and milling operations to machine a variety of metal parts under the supervision of the Operations Manager.. Essential Functions: Machine parts to specifications using machine tools such as lathes and milling machines Work from blueprints, engineering instructions, and specifications Setup, adjust and operate all of the basic machine tools and many specialized tools in order to perform precision machining operations Align and secure holding fixtures, cutting tools, attachments, accessories, and materials onto machines Check parts to ensure that they are properly lubricated and cooled Measure, examine, and test completed units to defects and ensure conformance to specifications, using precision instruments such as micrometers Clean and lubricate machines, tools, and equipment in order to remove grease, rust, stains, and foreign matter Maintain records and document in-process inspection data Required Qualifications & Experience: Must be a “U.S. Person” as defined by the U.S. Government and able to work without restrictions with ITAR related data High School Degree or G.E.D 1+ years of experience Desired Knowledge, Skills, and Abilities Precision Manufacturing Certificate preferred Must be able to read, write, understand, and speak English at a functional level Ability to communicate professionally and effectively with all levels of the organization Ability to interpret policies, procedures, and standard business practices Ability to read and interpret blueprints and engineering work instructions Ability to setup and operate CNC turning and milling machines Ability to measure using standard shop tools, machine tools, and engineered gaging to close established tolerances Knowledge of G & M codes Ability to travel domestically - 10% max Physical Requirements: Must be able to lift 35lbs Must be able to sit and stand for extended periods of time Must be able to go up and down stairs frequently Reasonable accommodations may be made to enable individuals with disabilities to perform. Hanwha Aerospace USA is an Equal Opportunity Employer. We conform to all the laws, statutes, and regulations concerning equal employment opportunities and affirmative action. We strongly encourage women, minorities, individuals with disabilities, and veterans to apply to all of our job openings. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, age, disability status, Genetic Information & Testing, Family & Medical Leave, Sexual Orientation, and Gender Identity or Expression, protected veteran status, or any other characteristic protected by law. We prohibit Retaliation against individuals who bring forth any complaint, orally or in writing, to the employer or the government, or against any individuals who assist or participate in the investigation of any complaint or otherwise oppose discrimination. *Subject to change with or without notice*

Essential Duties and Responsibilities include the following. Other duties may be assigned. Interprets blueprints, sketches, drawings, manuals, specifications, routing, inspection and setup requirements. Selects, aligns, and secures holding fixtures and accessories on machines. Selects, aligns, and secures cutting tools into tool holders and then installs tool assemblies on machines. Loads and secures raw material on machine. For manual operations, calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut. For CNC operations, retrieves current revision machine control program and downloads to machine. Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls as required. Unloads finished machined part from machine and deburrs as necessary to perform quality checks. Verifies conformance of finished workpiece to specifications manually or through the use of a CMM / DCC-CMM. Enters required data into quality documentation and signs as required. Performs daily housekeeping and maintenance on assigned machine, auxiliary equipment, tooling and work area. Confers with engineers, programmers, inspectors, or maintenance personnel to resolve machining or assembly problems. Competency: To perform the job successfully, an individual should demonstrate the following competencies: Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly. Safety and Security - Observes safety and security procedures; Determines appropriate action beyond guidelines; Reports potentially unsafe conditions; Uses equipment and materials properly. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Education/Experience: High school diploma or general education degree (GED); VoTech Trade school graduate preferred. Completed a machining related apprenticeship program or 3-5 years equivalent combination of education and experience. Experience setting up and operating Mill Turn B-axis Twin Spindle Machines and Citizen multi-axis lathes Language Ability: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to present numerical data effectively and write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Math Ability: Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to compute rate, ratio, and percent and to interpret bar graphs Reasoning Ability: Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations. Computer Skills: Possess Basic Computer skills. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly exposed to work near moving mechanical parts. The noise level in the work environment is usually moderate. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is frequently required to walk and reach with hands and arms. The employee is occasionally required to sit. The employee must regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include Close vision and Depth perception. ADDITIONAL NOTES ARCH Global Holdings is an Equal Opportunity Employee and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ARCH Global Holdings are employed on an at-will basis. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.