Quality technician jobs in Danville, VA

Hiring Immediately - Full Time Quality Technician - Mebane, NC Shift Available: Nightshift: 7:00PM-7:00AM What we offer: * Medical, Dental and Vision benefits available immediately * 401K with company match * Paid Time Off and 11 Paid Holidays * Other benefits such as company paid Long-Term & Short-Term Disability, Tuition Assistance and more * Annual Reimbursement for Safety Shoes * Comprehensive training with numerous learning and development opportunities * A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work. The Opportunity: * Assist manufacturing in maintaining required quality standards by performing quality inspections throughout a job run as well as by performing final inspections on specified product, including verifying weight counts and completing daily reports and machine inspections. Ensure compliance with federal, state, company policies & safety rules. * Assists manufacturing in maintaining the required quality standards through ongoing inspection. * Audits all operator processes against Standard Operating Procedures. * Verifies product integrity to job specifications - structure, color, size, layout, etc. using variety of tools, measurements, and methods. * Identifies suspect product by completing and placing a hold tag on the load. * Reads and understands the combo and job tickets for quantities, selection numbers, size specifications, or other specifications before beginning the job. * Reports any questions or problems to the Quality Assurance Manager. * Collects and visually inspects customer samples for color variance, size, and cosmetic defects before forwarding to sample area for processing. * Releases jobs to the shipping department as needed. * Completes required job and weight count reports daily. * Performs final inspections for specified customers. * Weighs jobs for count verification. * Performs other job duties as assigned. What you need to succeed: * Stand on feet up to 12 hours a day. * Must have the ability to read and write instructions and correspondence. * Use hands for simple and power grasping as well as push and pull. * Use a hand operated pallet jack to move pallets of material. * Attention to fine detail with printing, cutting and gluer issues. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. * Must be able to maintain good attendance. * Able to perform all essential functions of this job with or without reasonable accommodation. Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of safety, loyalty, integrity, and respect, we use leading science and technology to move fiber-based packaging forward. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law.

Job Description Essential Duties and Responsibilities: • Solar Structural, Mechanical, and Electrical field inspections • Reviews Structural, Mechanical, and Electrical Inspection Test Points (ITPs) for their assigned projects and prior to project start. • Communicates implementation and feasibility of developed ITPs throughout the duration of project. • Initiates field inspections of Structural, Mechanical, and Electrical Defined Features Of Work (DFOW). • Works with Quality Lead to complete quality inspections within the required timeframe. • Works with Electrical Self Perform (ESP) & Subcontractors on builds after approved FAI to ensure the work is being installed correctly. • Communicates quality related items with Quality Lead. • Completes daily walk downs of builds with ESP and/or Subcontractor QC individuals. • Train ESP QC or Subcontractor QC individuals on ITPs and inspection requirements. • Helps Quality Lead to maintain an accurate Daily Quality Report Heat Map of project quality progress. • Helps Quality Lead to gather field data for Non-Conformance and Corrective Action Reports when necessary. • Provide Temporary Labor individuals with the site appropriate inspection check lists. • Facilitate communication between Site Quality Lead, Construction Foreman, and progress/issues found. • Helps Quality Lead to audit Self-Perform or Subcontractor QC documentation. • Provide coverage for other Quality Technicians as needed on other Strata projects. • Work with the Quality Lead to develop, implement and facilitate Field Quality Control Program (FQCP) for the projects. • Responsible for daily reporting to Quality Lead of the project's Quality-related information. • Is fluent in requirements regarding inspection, inspection tools and equipment. • Helps manage the project non-conformances related to the work. • Works with Strata Self-Perform Team and/or Subcontractors on Quality related issues. • Completes random oversight inspections daily. • Verifies nonconformance rework completion. • Works with Strata Self-Perform Team and/or Subcontractors on quality of work, conformance, and FQCP requirements. • Investigates any NCRS/CARS. Provides input with data collected from field installation. • Work with project team on QC and testing requirements/ITP and checklist completion. • Attends weekly training on Safety and Quality. (Morning Meetings) • Maintain PPE checks. • Assist is preparation of FQCP Safety requirements every morning with Job Hazard Analysis (JHA). • Ensure all testing, inspections, and work required are completed in a timely and professional manner. • Communicate any concerns related to scheduling, Strata Self-Perform Team and/or subcontractors, and all quality related issues to Quality Lead. • Identify and document quality issues that are happening and help drive solutions and drive continuous improvement with the help of Quality Lead. • Assist in establishing documentation of standard operating specifications/work instructions/procedures. Each employee has an obligation to stop work in situations where there is immediate danger to life or health. • Maintain inspection metrics and documentation. • Attend necessary quality meetings internal and external. • Develop Quality Technician's and Temp Labor's understanding and knowledge of the Quality plan requirements. • Communicate any revision to procedures and support development of standard operating procedures. • Helps Quality Lead to prepare QIR, NCR, CAR, RFI's, and Root Cause Analysis, as necessary. • Provide technical support and guidance during inspection and problem resolution to the team as needed. • Maintain a clean and operational vehicle. • Communicate any fleet vehicle damage, maintenance, or inspections to Fleet manager immediately. • Arrive to work prepared to work and dressed appropriately. • Always maintain a positive attentive attitude towards all co-workers and construction teams. • Check email daily and respond in a timely manner. • Work independently and as a member of the team. • Gather data for writing Requests for Information (RFI) and seeing them to closure. • Helps train Strata Self-Perform Team and/or subcontractors QC on utilization of FieldView (continuous training, troubleshooting, and minimum standards for each Defined Feature of Work (DFOW). • Maintain communication with Subcontractors for deficiencies, outstanding items, review, and closure. • Verify Strata Self-Perform Team and/or Subcontractor tooling calibration certifications. • Helps with document retention using correct platforms (E-Room, PWA, Viewpoint Teams, Microsoft Teams, etc.) • Understand and abide by all company policies. • Help with the development of training material for department. Education and/or Work Experience Requirements: • OSHA 10 • NFPA 70 E • Proficient in Microsoft office (Word, Excel, PowerPoint, Teams, etc.) • Understands current technology practices and deployment uses. • Clear understanding of OSHA safe workplace practices and procedures. • Ability to read and understand construction drawings. • Ability to read and understand electrical single-line and three-line diagrams. • Ability to read and understand manufacturer installation standards. • Must have the ability to travel, work on-call during off shift hours and weekends. • Maintain an operational cellular device with reliable service provider. • Pass initial and random drug screenings. Physical Requirements/Work Environment: Work is completed both in the field 90%, and in an office environment 10%. This position works in an outdoor environment and must tolerate all seasons' weather; requires extensive travel though portions of the North Carolina, Virginia, and other states on an as-needed basis. Must be able to comply with all safety standards and procedures. Personal protective equipment is required (included but not limited to hard hat, proper footwear, rubber insulated gloves, safety glasses). Must be able to sit, stoop, kneel, bend, stand, or walk short to long distances for 8-10 hours a day. Must be able to lift, push, or pull up to 50 pounds on an occasional basis. 100% TRAVEL.

Job DescriptionSalary: $25 DOE PRINCIPAL FUNCTIONS OF THE DEPARTMENT: Responsible for the safe operation of a web offset press in printing high quality security documents that meet or exceed customer requirements. RESPONSIBILITIES AND TASKS OF THE POSITION: Run printing jobs in accordance with job jacket and all safety, quality, and production requirements. Troubleshoot printing problems, contacting maintenance, prepress, ink dept., and/or management as needed. Direct work of 2nd production technician and press helper including loading paper, getting chemicals, washing press, etc. Check register and make adjustments as required Maintains operating and malfunction/downtime log and required production documentation (Seradex ERP system) Follows quality standards, maintains close tolerances, performs quality checks and enters Quality non-conformances (QNCRs) into Intelex system. Review images on an ongoing basis for color, quality, and other compliance issues. Advise management on performance issues involving other employees assigned to the press Focus on the training and development of the press operators within BCA Performs other duties as assigned MINIMUM REQUIREMENTS High School Diploma or equivalent Minimum five (5) years printing experience (or equivalent combination of education and experience) Familiar with post-press operations (bindery/finishing) Some night and weekend assignments may be required for training of operators Occasionally maybe requested, and given proper notice, expected to be able to fill in for absences. Knowledge of basic math including weights, measures, fractions, and decimals Mechanical aptitude Ability to walk, stand or bend for up to 12 hours. Excellent color vision Ability to lift up to 50 lbs. Ability to work on any shift. to include 12-hour shifts Must be able to adhere to stringent security and safety rules.

At Food Lion, Associates are the most important assets to our organization. We want associates to have meaningful careers full of variety and challenges. Each associate contributes to the overall success of Food Lion, and in return, we strive to provide all associates with a fulfilling work experience and reward performance and commitment. We are committed to the professional development of our associates through on-the-job learning opportunities and training. Primary Purpose: Provide our customers with a clean, safe, inviting place to shop by maintaining standards in accordance with the standard practice manual. Minimize shrink through proper utilization of standard practice. Duties and Responsibilities: Maintain an atmosphere of enthusiastic customer awareness with primary emphasis on fast, friendly, and accurate customer service to create a positive shopping experience Courteous and helpful to other associates Sweep and clean floors on nights with no scheduled vendor services Weekly cleaning of Produce, Market and Deli Departments Clean and organize the store mop room Find more efficient ways to do the job and seek to reduce costs and improve labor productivity Follow QA daily check list and sanitation standards set by Food Lion Follow current Standard Practices regarding cleanup of Hazardous Waste product Maintain a complete understanding of and adherence to company guidelines, policies and standard practice Understand and follow Food Safety and Workplace Safety guidelines and procedures Observe and correct all unsafe conditions that could cause associate or customer accidents Report all associate and customer accidents in accordance with established Food Lion procedures to the Manager on Duty Ensure compliance with local, state and federal regulations Wear the Food Lion uniform complete with name badge, when on duty, has a neat and clean appearance while adhering to the Food Lion dress code Successfully complete Computer Based Training (CBT), Training Packet and Training Aid courses Perform all other duties as assigned Qualifications: High school graduate or equivalent preferred Excellent interpersonal, organizational, communication and customer service skills Ability and willingness to learn multiple tasks and technical requirements of the job Ability to use technical information to solve problems Must meet minimum age requirements to perform specific job functions Must be able to meet the physical requirements of the position, with or without reasonable accommodations Physical Requirements: Ability to use computers and other communication systems required to perform job functions Perform repetitive hand and arm motions Bend and lift products weighing up to 15 lbs. continuously, 25 lbs. frequently, and 50 lbs. on occasion Pull or push up to 75 lbs. on occasion Stand 100% of the time, frequently walking short distances Be able to handle a variety of substances associated with cleaning and packaging materials, fresh fruits, vegetables, house plants/flowers and household cleaners Use hands to frequently/continuously handle currency (paper and coin) as well as operate a variety of equipment such as cash register, lottery machine (where applicable), scanner, computer, and calculator Frequent reaching and grasping at waist level: occasionally above shoulder or below waist level Meet established volume activity standards for the position Tolerate working in extreme hot/cold temperatures for up to 20 minutes at a time Have sufficient visual ability to check ID cards, checks, invoices and other written documents Food Lion provides equal employment opportunities to all associates and applicants for employment without regard to race, color, religion, sex (including pregnancy, childbirth and related conditions) national origin, age, disability, sexual orientation, veteran status, gender identity or gender expression or any other characteristic protected by law. If you have a disability and require assistance in the application process, please contact our Recruiting Department at ***********************

Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Location : Mebane, NC 27302 Duration : 6 months contract (With a high possibility of extension) • ISO 9000 experience • Manufacturing experience (work in manufacturing plant environment) • Leadership skills (facilitate meetings, drive change, lead team, etc) • Strong MS excel skills • SAP experience will be a plus (not required by highly desired) Job description: • Take responsibility for continuous improvement of production operations including safety, scheduling, quality, Lean and training/development in assigned areas • Develop and maintain Quality Management System documents such as manufacturing methods, technical documentation, and training documentation • Support and facilitate investigations, root cause analysis and corrective actions. • Practice analytical problem solving incorporating use of strong math skills • Demonstrate initiative to learn and seek improvement opportunities with minimal direction Qualifications • Must have a Technical or Business Associates degree or equivalent work experience. • Minimum 3 year quality control experience • Minimum 1 year ISO and/or regulatory experience • Demonstrate understanding of quality procedures and concepts • Demonstrated lean manufacturing participation • Demonstrated EHS participation and support Additional Information To know more about this position, please contact: Himanshu Prajapat ********************************** ************

If you are a hardworking, enthusiastic and creative individual interested in working for a leading national display company, we would like to hear from you. Apple Rock provides excellent training, benefits, and a great work environment. Job Description The primary responsibility is to understand all necessary parts, components, measurements, drawings, and blueprints to build, assemble, and disassemble trade show exhibits. Complete jobs on specifications and budget and produce high-quality products that result in profitability and customer satisfaction. Benefits Comprehensive benefit package, including health, vision, & dental insurance - after 30 day waiting period Paid Time Off - Starting 14 days annually Opportunity for advancement 401K Requirements Skills & Knowledge Required Attention to Detail Technical Drawing Comprehension Effective Communication Positive Attitude Ability to Read Service Orders Hand Tool Knowledge & Skills Ability To Read Blueprints Ability to write a detailed packing list with freight dimensions Dependability Salary Description $45,000 - $55,000

Description & Requirements Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Hiring Immediately - Full Time Quality Technician - Mebane, NC Shift Available Nightshift: 7:00PM-7:00AM What We Offer * Medical, Dental and Vision benefits available immediately * 401K with company match * Paid Time Off and 11 Paid Holidays * Other benefits such as company paid Long-Term & Short-Term Disability, Tuition Assistance and more * Annual Reimbursement for Safety Shoes * Comprehensive training with numerous learning and development opportunities * A career with a global packaging company where Sustainability, Safety and Inclusion are business drivers and foundational elements of the daily work. The Opportunity * Assist manufacturing in maintaining required quality standards by performing quality inspections throughout a job run as well as by performing final inspections on specified product, including verifying weight counts and completing daily reports and machine inspections. Ensure compliance with federal, state, company policies & safety rules. * Assists manufacturing in maintaining the required quality standards through ongoing inspection. * Audits all operator processes against Standard Operating Procedures. * Verifies product integrity to job specifications - structure, color, size, layout, etc. using variety of tools, measurements, and methods. * Identifies suspect product by completing and placing a hold tag on the load. * Reads and understands the combo and job tickets for quantities, selection numbers, size specifications, or other specifications before beginning the job. * Reports any questions or problems to the Quality Assurance Manager. * Collects and visually inspects customer samples for color variance, size, and cosmetic defects before forwarding to sample area for processing. * Releases jobs to the shipping department as needed. * Completes required job and weight count reports daily. * Performs final inspections for specified customers. * Weighs jobs for count verification. * Performs other job duties as assigned. What You Need To Succeed * Stand on feet up to 12 hours a day. * Must have the ability to read and write instructions and correspondence. * Use hands for simple and power grasping as well as push and pull. * Use a hand operated pallet jack to move pallets of material. * Attention to fine detail with printing, cutting and gluer issues. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals. * Must be able to maintain good attendance. * Able to perform all essential functions of this job with or without reasonable accommodation. Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law.

The Quality Technician conducts detailed inspections of fabricated parts, in process control inspections. Conducts audits of packaged, staged and loaded shipments to ensure compliance with Ply Gem quality requirements and specifications. Knows and understands all safety rules and precautions necessary for working in and about a manufacturing environment Responsible for monitoring, inspecting, and reporting all assigned activities and finished goods to ensure quality Ability to submit clear, concise, and accurate reports of inspections, audits, test results, job site visits and delivered goods Ability to conduct tests using a variety of tools and equipment Responsible for preparing daily quality control activity summaries Ability to assist in developing and implement objectives, plans and priorities to achieve quality control objectives in a timely manner to meet deadlines Communicates with Quality Manager on methods and problem-solving procedures to successfully meet deadlines Assists and periodically delivers internal external audits Maintains continuous improvement practices in work area May be assigned additional projects or duties as designated by Team Leader Ability to complete and present basic Root Cause analysis Inspect all incoming raw materials per inspection plan Record and maintain receiving inspection results Completes first article quality reports In-Process Verification of calibration tools for all inspection test equipment and tools Maintains gage calibration database and records Perform product test and records results during product manufacturing Ensures adherence to production practices and product quality standards Assists in the documentation of and resolution of nonconforming material and process discrepancy Evaluate product to determine if they are acceptable Perform start-up and changeover audits to verify that the product will meet specifications Proficient at using Microsoft office Perform Test Water Wall duties with loading and unloading units into the test wall and perform failure investigation as needed Qualifications To perform satisfactorily in this position, the employee must be able to perform each essential duty satisfactorily. The requirements listed below are representative of knowledge, skills, and/or ability required. Reasonable accommodations may be made for employees with certain disabilities to perform the essential functions. Language Skills: Ability to read and comprehend documents including but not limited to policy manuals, safety rules/programs, operating and maintenance instructions, procedure manuals, and simple correspondence, in addition, the ability to communicate information effectively one-on-one and in small group situations and settings is required Mathematical Skills: Ability to perform general mathematic calculations including but not limited to addition, subtraction, multiplication, fractions, percentages, and division Some positions may require advance mathematics Reasoning Ability: Ability to apply common sense understanding to perform work instructions furnished in written, oral or diagram form a must. In addition; the ability to solve problems, which involve multiple variables in a standard situation, is required Other Knowledge, Skills & Abilities: Must have a high degree of concentration Ability to work effectively to meet deadlines Ability to work with a diversified work force Ability to read different measuring devices (i.e. tape measure, protractor, micrometer) Physical Demands: While performing the duties of the job, the employee is regularly required to talk or hear The employee is frequently required to walk The employee is frequently required to stand; sit; bend; stoop; use hands and fingers to handle or feel objects; reach with hands and arms; lift; climb and/or balance essential tasks Specific vision abilities include close-up and distance vision, color vision, peripheral vision, and depth perception Work Environment: The employee may be required to enter areas that are near moving mechanical parts, with occasional exposure to hazardous chemicals, and extreme cold or heat The noise level in the work environment is considered moderate, and may require the use of hearing protection The employee will be required to utilize Personal Protective Equipment (PPE) when accessing certain manufacturing areas: hard hat, gloves, welding jacket or weld bibs, safety glasses, welding hood and earplugs Safety Responsibilities: Before initiating work at PlyGem, the employee is required to read and understand the position's Job Safety Analysis The employee must wear appropriate Personal Protective Equipment (PPE) and perform tasks in a manner consistent with Ply Gem safety training, Ply Gem Employee Manual and OSHA regulations Additional Information Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. All your information will be kept confidential according to EEO guidelines Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play. Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here. You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here. If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at ************ or [email protected]. If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at ************ or [email protected]. This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Foster Fuels a national fuel distribution and fuel service provider has an opening for a Fuel Quality Technician position based out of our Brookneal Headquarters office. Fuel Quality Technicians candidates must possess excellent self-management skills, a proven track record of meeting ambitious goals, and exemplary customer service. This position requires extended periods of travel throughout the United States. DUTIES Fuel Quality technicians pull samples from fuel storage tanks and test the quality of the fuel. Assist with cleaning & filtration operations at customer sites. Lead fuel cleaning and filtration operations at Customer sites. (company training provided). Provide Fuel Quality Service Work Must be able to maintain records and process paperwork related to service work provided including preparing reports and data entry Assist with Tank Pump outs, fuel delivery or other Mission Critical Work when required. Must be able to work equally well in an office as well as out at a customer site (field setting) Must have demonstrated problem solving skills and ability to address and resolve issues in a professional manner. Must be available to assist in Disaster Relief deployments when required. KEY CANDIDATE ATTRIBUTES Must have demonstrated problem solving capability. Ability to work independently or as a team. Requires travel up to approximately 60% of the time for up to two to three weeks at a time. Candidates must be mechanically inclined and have had some previous mechanical work experience. Requires attention to details in all aspects of the job, during fuel quality work as well as office work. Candidates must be self-motivated and a self-starter Candidates must have experience and competence with Microsoft Office suite, Word, Excel, Outlook Candidates must have effective written and oral communications skills. KEY CANDIDATE SKILLS Must have High School Diploma or equivalent. Must be able to obtain a US Passport within six months. Must have or be able to obtain a Class A or B CDL with Tanker and Hazmat endorsements within three months. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand; walk; sit for long periods; use hands to finger, handle, or feel objects, tools or controls; reach with hands and arms; climb stairs; balance; stoop, kneel, crouch or crawl, talk or hear. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. WORK ENVIRONMENT Work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. BENEFITS SUMMARY Foster Fuels offers a very competitive Medical Benefits package. We offer Anthem Medical, Dental, Vision, Life, Disability, Accident, Critical Illness, and Hospital Indemnity. The medical plan consists of 4 plan options with 2 of them free to the employee. All plans cover preventative care and Rx at 100%. In addition, dependent coverage is 100% paid by employee. Additionally Foster Fuels Offers: Medical Flexible Spending Account (FSA) and Dependent Care FSA $10,000 Employer Paid Life Insurance Employee Assistance Program (EAP) 401K match through ADP with Foster Fuels matching half of the employee contribution up to 6%. Paid Time Off 7 Paid Holidays, Floating Holiday, and Volunteer Time Off Day Annual Discretionary Market-Based and Performance Raises Annual Discretionary Bonuses Paid Parental Leave Annual Credit to company swag store depending on position Educational Assistance Program Employee and Dependent Scholarship Opportunities Employee Pricing on Appliances, Service, Propane, and Heating Oil Foster Gives Program Referral Bonuses Driver Benefits - Including emergency pay, pump-load pay, annual safety bonus, and home daily CDL Sign-On Bonus Gym/ Fitness Reimbursement - up to $100 annually Foster Fuels is an Equal Opportunity Employer that does not discriminate based on actual or perceived race, creed, color, religion, alienage or national origin, ancestry, citizenship status, age, disability or handicap, sex, marital status, veteran status, sexual orientation, genetic information, pregnancy and childbirth (or related conditions), or any other characteristic protected by applicable federal, state, or local laws.

Who We Are At Agiliti, we believe every interaction has the power to change a life. We are a nationwide company of passionate medical equipment management experts who proudly serve hospitals and healthcare facilities to ensure quality medical equipment is in the right place at the right time for effective patient care. We value our diversity and celebrate our differences, always seeking diverse backgrounds, ideas and experiences. Make an impact in healthcare and grow your career with Team Agiliti! SHIFT: 7am - 3:30pm The Quality Control Evaluation Technician I uses technical and mechanical skills for the incoming and outgoing evaluation of surgical medical instruments within a designated Modality. What is in It for You? The opportunity to make a real impact on patients' lives. Comprehensive Benefits Package. Tuition Reimbursement. Up to a 3% match on your 401K. Make any day a pay day with Daily Pay. What You Will Do in This Role Perform basic incoming and outgoing Quality Control Testing of assigned equipment for identified Modality. Receive, inspect, evaluate and test incoming equipment. Identify defective, worn parts and/or equipment craftsmanship that does not meet standards. Ensure proper operation and standards of outgoing equipment. Document all services & testing performed, including all parts needed. Maintain work area in good condition and to meet Visual Work Place (VWP) Standards. Prepare instruments and equipment for shipping. Handle timecard & time off entry, review and submission. Other tasks as assigned or needed. What You Will Need for This Role High school diploma/GED. 1-2 years of experience with repairs preferred but not required. The ability to sit, stand, lift, bend and stoop often. The ability to lift and carry up to 20 lbs. Some cost awareness and performance. Flexibility in work schedule to meet department needs. Proficient computer skills. The ability to perform equipment decontamination processes if needed. Maintain modality/department standards. It is the policy of Agiliti to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender identity, sex, sexual orientation, national origin, age, physical or mental disability, genetic information, marital status, status as a veteran, military service, or any other characteristic protected by applicable federal, state, or local civil rights laws. In addition, Agiliti will provide reasonable accommodations for qualified individuals with disabilities. Agiliti strictly prohibits any form of retaliation against individuals who make good faith reports of alleged violations of this policy or who cooperate in Agiliti's investigation of such reports. Affirmative Action Policy Statements You may be required to obtain certain vaccinations, or provide proof of current vaccination status, based on customer and/or company requirements. If vaccination is required, Agiliti will provide specific directions and cover the expense at a participating clinic. Please note, this includes the COVID-19 vaccination. Agiliti offers a robust suite of benefits for regular, full-time, non-union employees including: health insurance options for Medical, Dental & Vision plans, Short- and Long-Term Disability plans, Flexible Spending Accounts, Health Savings Accounts, Life Insurance Options, Paid Time Off, 401K Saving Plan with employer match, Employee Discounts, Tuition Reimbursement, Daily Pay program, Employee Assistance Program, and wellness programs. Agiliti is an equal opportunity employer and provides reasonable accommodations to employees and applicants consistent with state and federal law. If you require assistance with your application, please contact ****************************. Primary Job Location:Greensboro NC - LabAdditional Locations (if applicable):Job Title:Surgical Evaluation Technician ICompany: Agiliti Location City:GreensboroLocation State:North Carolina

Who We Are At Agiliti, we believe every interaction has the power to change a life. We are a nationwide company of passionate medical equipment management experts who proudly serve hospitals and healthcare facilities to ensure quality medical equipment is in the right place at the right time for effective patient care. We value our diversity and celebrate our differences, always seeking diverse backgrounds, ideas and experiences. Make an impact in healthcare and grow your career with Team Agiliti! SHIFT: 7am - 3:30pm The Quality Control Evaluation Technician I uses technical and mechanical skills for the incoming and outgoing evaluation of surgical medical instruments within a designated Modality. What is in It for You? The opportunity to make a real impact on patients' lives. Comprehensive Benefits Package. Tuition Reimbursement. Up to a 3% match on your 401K. Make any day a pay day with Daily Pay. What You Will Do in This Role Perform basic incoming and outgoing Quality Control Testing of assigned equipment for identified Modality. Receive, inspect, evaluate and test incoming equipment. Identify defective, worn parts and/or equipment craftsmanship that does not meet standards. Ensure proper operation and standards of outgoing equipment. Document all services & testing performed, including all parts needed. Maintain work area in good condition and to meet Visual Work Place (VWP) Standards. Prepare instruments and equipment for shipping. Handle timecard & time off entry, review and submission. Other tasks as assigned or needed. What You Will Need for This Role High school diploma/GED. 1-2 years of experience with repairs preferred but not required. The ability to sit, stand, lift, bend and stoop often. The ability to lift and carry up to 20 lbs. Some cost awareness and performance. Flexibility in work schedule to meet department needs. Proficient computer skills. The ability to perform equipment decontamination processes if needed. Maintain modality/department standards. It is the policy of Agiliti to provide equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender identity, sex, sexual orientation, national origin, age, physical or mental disability, genetic information, marital status, status as a veteran, military service, or any other characteristic protected by applicable federal, state, or local civil rights laws. In addition, Agiliti will provide reasonable accommodations for qualified individuals with disabilities. Agiliti strictly prohibits any form of retaliation against individuals who make good faith reports of alleged violations of this policy or who cooperate in Agiliti's investigation of such reports. Affirmative Action Policy Statements You may be required to obtain certain vaccinations, or provide proof of current vaccination status, based on customer and/or company requirements. If vaccination is required, Agiliti will provide specific directions and cover the expense at a participating clinic. Please note, this includes the COVID-19 vaccination. Agiliti offers a robust suite of benefits for regular, full-time, non-union employees including: health insurance options for Medical, Dental & Vision plans, Short- and Long-Term Disability plans, Flexible Spending Accounts, Health Savings Accounts, Life Insurance Options, Paid Time Off, 401K Saving Plan with employer match, Employee Discounts, Tuition Reimbursement, Daily Pay program, Employee Assistance Program, and wellness programs. Agiliti is an equal opportunity employer and provides reasonable accommodations to employees and applicants consistent with state and federal law. If you require assistance with your application, please contact ****************************. Primary Job Location:Greensboro NC - LabAdditional Locations (if applicable):Job Title:Surgical Evaluation Technician ICompany: Agiliti Location City:GreensboroLocation State:North Carolina

Perform all inspections and functional testing on all manufactured generator systems to ensure that the gear meets necessary electrical code, that the gear functions as designed by the specified engineer, and that the gear is safe to be energized on-site before it leaves the manufacturing plant. Qualification Requirements Must be able to reliably work an eight-hour minimum shift with some voluntary exceptions. To perform this job successfully, an individual must be able to perform each essential procedure safely and thoroughly. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential Functions + Locate and keep track of documentation for specific jobs. + Run procedural tests and inspections in an organized format complying with necessary functions for gear types. + Load files and test sequence of operations as dictated in project CD set notes. + Accurately record test results and component specs. + Move gear with use of forklift or pallet jack. + Removal and reinstallation of panels up to 50 lb. + Other duties as assigned. Minimum Qualifications + High school diploma, equivalent, or higher degree (Relative work experience will be considered). + NFPA70E is required (Can be provided by PowerSecure if other requirements are satisfactory). + Ability to read and interpret documents such as safety rules, operations manual, and written directions in the English language. + Ability to follow report guidelines to accurately document test results and product specifications. + Ability to add, subtract, multiply, and divide in all units of measure in order to determine splice plate length and basic voltage and amperage measurement ratios. + Ability to wear and maintain proper PPE. + Minimum of 2 years' experience working with Switchgear, Electrical, or Generator systems (unless applying for an apprenticeship position). + Engineering or programming experience will be accepted in lieu of Switchgear, Electrical or Generator experience. Knowledge, Skills and Abilities + Knowledge of diesel engines. + Understanding of electrical schematics and ability to interpret mechanical notes. + Through accumulated experience, must be able to quickly and effectively diagnose and repair nonconforming electrical circuits. + Excellent verbal and written communication skills required. Physical Demands + Limited local travel will be required. Less than 10% + Must be able to work in confined spaces and to position one's self in various positions including low to the ground or high up on equipment. + Must be able to lift 50lbs and manipulate heavy test equipment and cables. + Manual dexterity to operate digital equipment, including computers and PLC's, protective relays, controllers, and other such equipment with + small fine buttons and operators. + Must be able to work outside for extended periods of time Work Environment When running the engines, you will be working outdoors with exposure to the elements. This can include, but is not limited to, heat, cold, or rain. A risk of electrical shock is always present. At times there can be hazards from moving equipment (i.e.: forklifts). There can be a lot of ambient noise, and in some cases hearing protection must be worn. Risk of cuts or abrasions is present, especially when dealing with panels, or maneuvering between units for splice plate measurements or mechanical checks. About Us PowerSecure, a Southern Company subsidiary, is a leading provider of innovative energy solutions to electric utilities and their industrial, institutional, and commercial customers. Join Our Power Team! (https://cloud.3dissue.com/***********37/242401/HR-9-14-2020/index.html) We invest in high-value and cost-effective benefits for our employees. Our benefits package includes: + Medical, dental, vision and life insurance coverage + Competitive pay and a matching 401 (k) plan + Vacation, Company Holidays, Paid Time Off (PTO- personal and sick days) + Flexible spending accounts/Health savings account + Wellness Incentive Programs + Employee Referral Program + Tuition Reimbursement PowerSecure is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. This position is not open to third party recruiters. #ZR Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Quality Specialist At ABB, we are dedicated to addressing global challenges. Our core values: care, courage, curiosity, and collaboration - combined with a focus on diversity, inclusion, and equal opportunities - are key drivers in our aim to empower everyone to create sustainable solutions. That's our story. Make it your story. In this role, you will have the opportunity to inspect and test parts, products, and systems sourced from suppliers and internally produced. Each day, you will ensure that only compliant items are released to the next stage and finally delivered to the customer. You will also showcase your expertise by employing standard test protocols and applying specifications to ensure quality. CORE RESPONSIBILITIES Conducts test protocols, as assigned, to ensure the parts, products, and systems meet specified requirements and customer expectations in incoming, manufacturing, factory test labs, or final inspection quality, as applicable. Supports quality control needs and activities for supplier quality, production quality, testing, and validation, as applicable in the local organization. Assists in specific quality-related training, promoting a passion for quality and integrity in all actions, with a focus on result orientation. Reports quality issues data, ensuring adherence to quality management system at all stages. Collaborates in improving existing test protocols and capability, resulting in greater efficiency, accuracy, and/or reliability of test outcomes. Evaluates quantitative metrics that provide descriptive data for the determination of compliance with requirements. Utilizes safety systems to perform work, resulting in an accident-free workplace. Notifies others when unsafe situations are observed and works with local Health, Safety, and Environment (HSE) teams to improve the safety systems. Trains local operational teams in quality assurance and testing routines and verifies that testing is performed as a part of the specified control plans. LICENSE TO OPERATE / CORE VALUES Demonstrates ABB's core values and group safety and integrity standards and acts accordingly. Implements and ensures compliance with the ABB code of conduct, global and local standards, tools, policies, and processes in their assigned area Ensures adherence to all relevant internal and statutory regulations and policies Ensures integrity and compliance with ABB values and ethics in all activities Demonstrates an understanding of health, safety and environment (HSE) terms, concept application, reporting, and risks. COLLABORATION / LEADERSHIP Ensures adherence to the collaboration objectives of the team to maximize results for ABB. Leads their own development journey by seeking knowledge and learning opportunities within the team. Manages relationships with stakeholders in their own area of responsibility and ensures alignment. MINIMUM KNOWLEDGE AND SKILLS REQUIRED 2+ years working in a manufacturing environment Data Analysis & Reporting Quality Assurance & Excellence Customer Satisfaction Governance Specialist Technical & Engineering Skills High school diploma or equivalent required Legal authorization to work in the US is required Knowledge and use of tools - tape measure, calipers, grinders, or other hand tools, as needed. Ability to safely use a ladder while performing the job, as needed Ability to lift, push and pull up to 40lbs PREFERRED OR DESIRED QUALIFICATIONS (List any further qualifications you would prefer the ideal candidate to have) WORKING CONDITIONS (Indicate amount of travel, unusual work - hours/shifts or environmental conditions.) Manufacturing plant environment requiring a combination of hands-on and technical tasks. Work may involve occasional lifting of materials, climbing stairs/ladders, and walking. Employees may be required to bend, twist, or stand for extended periods. Frequent use of computers is necessary for data entry, monitoring, and communication. Employees will also handle a variety of tools and equipment, from hand tools to machinery, requiring technical skills and adherence to safety protocols. Personal Protective Equipment (PPE), such as safety glasses, gloves, and steel-toed shoes, is required to ensure a safe working environment. Adhering to safety guidelines is essential for all team members. The work environment requires physical endurance, technical proficiency, and a commitment to maintaining safety standards to contribute to a productive and rewarding workplace. We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.

Job Description ABOUT THE ROLE The quality control group monitors, supports, and influences the design, configurations, and actual construction necessary to guide our design and production teams to manufacture high quality industry leading homes and components for our customers in accordance with regulatory requirements. The quality control inspector undertakes the inspection of materials, components, and final products to confirm adherence to quality, regulatory, and engineering specifications. He/she works collaboratively with production departments to identify ways to continuously improve production quality. The quality control inspector may work independently or under direct supervision executing specific process steps under continuous quality review and coaching as needed. ESSENTIAL DUTIES & RESPONSIBILITIES Works in a safe manner following all safety policies while performing job duties. Undertakes to maintain a safe and healthy work environment for all employees by identifying any safety standards, procedures, or regulations that are not optimally addressed. Maintains open communication with supervisor regarding safety concerns. Follows work orders and instructions in order to accurately and efficiently review the preparation and assembly of building components based on production area specifications and regulatory requirements including HUD specifications. Inspects incoming materials, in-process production, and finished products to ensure materials and products meet specifications, regulatory requirements, and applicable drawings; conducts visual and measurement tests; documents and communicates rejections of unacceptable items and required corrections; ensures defective products are not delivered to the customer. Works collaboratively with production supervisors, team leads, and line assemblers to discuss inspection results and provides guidance as needed. Documents inspection results by completing inspection reports and checklists; communicates any violations of the quality process or adherence to job performance requirements to Production Supervisors and QC Manager. Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. Keeps inspection and measurement equipment operating by following operating instructions and notifying management when repairs are necessary. Assists in maintaining and keeping tools, machinery, and work area clean and organized. Performs various other job duties as assigned and needed. MINIMUM QUALIFICATIONS Must be 18 years of age. This can be a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment. High school diploma and substantial experience in and clear understanding of the requirements and expectations across multiple production areas in a fabrication / manufacturing environment expected. Must have experience reading and interpreting schematics and excellent problem-solving skills. Experience in quality control Inspection preferred including building code knowledge, ability to gain an understanding of construction manuals, standards, regulations, and specifications regarding the products. Bilingual Spanish preferred. Ability to build effective relationships with fellow employees and supervisors including when providing constructive feedback and inspection results. Excellent written and oral communication skills required. Ability to handle multiple projects while maintaining attention to detail. Ability to work in a team, to be trained, and take direction. Flexible to work in a fast paced, changing environment. Not afraid to get dirty and handle tools/equipment daily. Must be able to pass a pre-employment drug screen.

Discover your exciting role The primary responsibilities of this position include conducting : visual inspections, checking coating thicknesses, spark testing of all coated surfaces; repairs. All listed duties are to be conducted in accordance to Fab Tech's set standards & meet all FM criteria. Explore your tasks and responsibilities * Conduct thorough visual inspections to ensure aesthetics of all parts meet Fab Tech's high quality criteria standards * Inspector will responsible for ensuring that coating thickness of parts meet mil thickness specification * Coating inspector will spark test all coated surfaces to ensure all coated surfaces within set parameters are free of defects * Coating inspectors will also be responsible for making judgement calls determining whether product needs to be reworked/repaired * Individual will be responsible for performing manual repairs on all defected parts Show your expertise POSITION REQUIREMENTS * Minimum high school diploma or equivalent. * Ability to stand on feet for up to 10 hrs. daily * Must be able to work in a fast paced work environment * Position requires the ability to make independent decisions based on standards * Attention to detail is a must * Gloves need to be worn during all visual; spark testing procedures * Note: Must pass PFT; RFT in order to wear 7700 series respirator Personal Attributes * Independent * Dependable, determined, positive in demeanor * Attention to detail. * Team player * Good attitude Physical Demands * Frequent standing, sitting, bending at the waist, and use of hands in this role is required * Specific vision abilities required to include close vision, and the ability to adjust focus * Occasionally perform physical activities including lifting (up to 50 lbs. unassisted) Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. The noise level in the production area is usually moderately loud. The Blast department is a sectioned off area of the production floor. Various blasting, grinding, inspecting and welding tasks are performed within the Blast department. * Safety glasses and hearing protection are required when in the production area * PPE covering eyes and skin is required when welding or heat induced cutting * PPE specific to tasks being performed is required Non-Solicitation We are not currently accepting third-party agency candidates for this position. Any agency candidate submitted to any employee of Exyte or TFS may be contacted by Exyte or TFS without obligation to the third-party agency. Employment Sponsorship Applicants must be authorized to work for any employer in the U.S. We are unable to sponsor employment visas at this time. EEO Statement Exyte US, Inc. and its subsidiaries are proud to be an Equal Employment Opportunity employer that is committed to supporting an inclusive workplace where associates excel based on personal merit, qualifications, experience, ability, and job performance. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex (e.g., pregnancy, childbirth and related medical conditions, sexual orientation, gender identity), national origin, disability, genetic information, protected veteran status, or any other protected characteristic as outlined by applicable federal, state, or local laws. Contact: You want to be part of the Exyte team? We look forward to receiving your application! For further questions and information, please do not hesitate to contact Clinton Crellin via E-Mail at ************************* Please note that we only consider applications submitted through our application portal. Applications sent via email will not be considered due to data protection regulations.

Job Description Machine Specialties, LLC is a leading contract machining and metal finishing company that designs an manufactures sophisticated, cost-effective solutions to meet our clients' most demanding challenges. Our company is located in Whitsett, NC, about 8 miles outside of Greensboro, NC. We are currently looking for a Quality Inspector to join our team. The Quality Inspector is responsible for completing final inspections prior to shipment, as well as in process inspections to support shop manufacturing. This role involves conducting inspections, testing, and documenting findings to maintain compliance with regulatory and company requirements. This is an hourly position that will report directly to the Quality Inspection Manager. Position Responsibilities Study and interpret product specifications to ensure product conformity Establish inspection plans and part acceptance criteria based on drawing requirements and customer feedback. Examine manufactured products, primarily aerospace machined parts, to ensure they parts meet all standards of presentation and quality Identify and communicate existing and potential quality issues Perform dimensional inspection on machined parts using a variety of precision metrology instruments such as height gages, micrometers, bore gages, etc. Collect and record data regarding defects Document and process nonconforming product Demonstrate flexibility within a fast-paced challenging environment Ability to coordinate, prioritize, and multitask Identify non-conforming materials and products, document discrepancies, and participate in root cause analysis and corrective action processes. Participate in continuous improvement initiatives to enhance the efficiency and effectiveness of the inspection and quality control processes. Follow all safety protocols and procedures to maintain a safe working environment. General Expectations Be responsible for the productivity and quality of your work and work performed in support of teams. Share skills, knowledge and experience so that common goals are achieved Continuously strive to develop skills and abilities Maintain schedule and communicate effectively with others Required Training/Education/Experience High school diploma or GED equivalent required Minimum 3 years inspection experience Machining experience preferred. Aerospace manufacturing experience is preferred. Must be able to pass a vision test, eyeglasses or contacts are acceptable. Equal Opportunity Employer including Veteran's/Disabilities

Armacell provides numerous and diverse career opportunities. Add your talent to ours and make a difference around the world! As a Quality Process Engineer, you'll play a key role in ensuring our products meet the highest quality standards - from development through manufacturing. You'll collaborate with cross-functional teams to drive continuous improvement, lead root cause analysis, and support key quality initiatives to ensure customer satisfaction. What Armacell can offer you Healthcare benefits including medical & prescription drug coverage, dental, vision, and mental health & wellbeing. Financial programs such as 401(k), life insurance, short & long- term disability coverage, and opportunities for performance-based salary incentive programs Generous paid time off including 12 holidays and at least 120 hours PTO Training and educational resources on our personalized learning management system Giving & volunteer opportunities, and discounts on retail products, services & experiences Key Responsibilities Co-lead the World Class Manufacturing (WCM) Quality Pillar (QPC). Promote and adhere to all safety standards in lab and plant environments. Manage document and data control processes. Administer the PPAP (Production Part Approval Process) program as required. Lead data-driven problem solving and root cause analysis initiatives. Maintain the Material Review Board and manage nonconforming materials. Track and report monthly quality performance metrics. Monitor and improve processes related to customer satisfaction. Lead and process corrective/preventive actions within the plant. Serve as an internal ISO 9001:2015 auditor and support annual audits. Conduct Gage R&R studies and capability analyses. Understand and apply customer-specific quality requirements. Co-lead Product Conformity Audits and maintain documentation in DCT. Conduct annual product testing and manage customer certifications. Oversee raw material certifications and incoming material data entry. Coordinate outsourced testing and UL certifications. Manage collection and shipment of sales samples. Administer AIMS setup, label databases, and quality document systems (e.g., Qualtrax). Support other quality projects as assigned. Qualifications Bachelor's degree in Engineering or Chemistry (required) 3+ years of quality assurance experience in a manufacturing setting Strong analytical, problem-solving, and communication skills Able to thrive in a global, cross-functional team environment Self-motivated with the ability to manage multiple tasks in a fast-paced setting Proficiency in Microsoft Office and quality systems Familiarity with SPC (Statistical Process Control) and world-class manufacturing tools Experience with rubber processing (mixing, curing, extrusion, foaming) is a plus Proven leadership and project management capabilities Must be authorized to work in the U.S. without sponsorship The expected compensation range for this role is $80,000.00 -$95,000.00. The compensation range and benefits for this position are based on a full-time schedule for a full calendar year. The salary will vary depending on your job-related skills, experience, and location. Pay increment and frequency of pay will be in accordance with employment classification and applicable laws. For part time roles, your compensation and benefits will be adjusted to reflect your hours. Benefits may be pro-rated for those who start working during the calendar year. Armacell does not accept unsolicited resumes from individual recruiters or third-party recruiting agencies in response to job postings. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers or HR team. In order to provide the best experience for all stakeholders, we limit the number of agencies and recruiting vendors we partner with. If you would like to be considered for a particular search or added to our approved agency list, please complete and submit this form: ************************************* More About Us Armacell's products significantly contribute to global energy efficiency making a difference around the world every day. With more than 3,300 employees and 25 production plants in 19 countries, the company operates two main businesses, Advanced Insulation and Engineered Foams, and generated net sales of EUR 836 million and adjusted EBITDA of EUR 155 million in 2023. Armacell focuses on insulation materials for technical equipment, high-performance foams for high-tech and lightweight applications and next generation aerogel blanket technology. For more information, please visit: ***************** We look forward to receiving your application. If you want to discover more about Armacell, take another look at our website ***************** #LI-KW1 Time Type: Full time

Perform all inspections and functional testing on all manufactured generator systems to ensure that the gear meets necessary electrical code, that the gear functions as designed by the specified engineer, and that the gear is safe to be energized on-site before it leaves the manufacturing plant. Qualification Requirements Must be able to reliably work an eight-hour minimum shift with some voluntary exceptions. To perform this job successfully, an individual must be able to perform each essential procedure safely and thoroughly. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Essential Functions * Locate and keep track of documentation for specific jobs. * Run procedural tests and inspections in an organized format complying with necessary functions for gear types. * Load files and test sequence of operations as dictated in project CD set notes. * Accurately record test results and component specs. * Move gear with use of forklift or pallet jack. * Removal and reinstallation of panels up to 50 lb. * Other duties as assigned. Minimum Qualifications * High school diploma, equivalent, or higher degree (Relative work experience will be considered). * NFPA70E is required (Can be provided by PowerSecure if other requirements are satisfactory). * Ability to read and interpret documents such as safety rules, operations manual, and written directions in the English language. * Ability to follow report guidelines to accurately document test results and product specifications. * Ability to add, subtract, multiply, and divide in all units of measure in order to determine splice plate length and basic voltage and amperage measurement ratios. * Ability to wear and maintain proper PPE. * Minimum of 2 years' experience working with Switchgear, Electrical, or Generator systems (unless applying for an apprenticeship position). * Engineering or programming experience will be accepted in lieu of Switchgear, Electrical or Generator experience. Knowledge, Skills and Abilities * Knowledge of diesel engines. * Understanding of electrical schematics and ability to interpret mechanical notes. * Through accumulated experience, must be able to quickly and effectively diagnose and repair nonconforming electrical circuits. * Excellent verbal and written communication skills required. Physical Demands * Limited local travel will be required. Less than 10% * Must be able to work in confined spaces and to position one's self in various positions including low to the ground or high up on equipment. * Must be able to lift 50lbs and manipulate heavy test equipment and cables. * Manual dexterity to operate digital equipment, including computers and PLC's, protective relays, controllers, and other such equipment with * small fine buttons and operators. * Must be able to work outside for extended periods of time Work Environment When running the engines, you will be working outdoors with exposure to the elements. This can include, but is not limited to, heat, cold, or rain. A risk of electrical shock is always present. At times there can be hazards from moving equipment (i.e.: forklifts). There can be a lot of ambient noise, and in some cases hearing protection must be worn. Risk of cuts or abrasions is present, especially when dealing with panels, or maneuvering between units for splice plate measurements or mechanical checks. About Us PowerSecure, a Southern Company subsidiary, is a leading provider of innovative energy solutions to electric utilities and their industrial, institutional, and commercial customers. Join Our Power Team! We invest in high-value and cost-effective benefits for our employees. Our benefits package includes: * Medical, dental, vision and life insurance coverage * Competitive pay and a matching 401 (k) plan * Vacation, Company Holidays, Paid Time Off (PTO- personal and sick days) * Flexible spending accounts/Health savings account * Wellness Incentive Programs * Employee Referral Program * Tuition Reimbursement PowerSecure is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. This position is not open to third party recruiters. #ZR

A great career opportunity Ahold Delhaize USA, a division of Netherlands-based Ahold Delhaize, is the parent company for Ahold Delhaize's U.S. companies, including its local brands, Food Lion, Giant Food, The GIANT Company, Hannaford and Stop & Shop, and the U.S. services companies, Retail Business Services, Peapod Digital Labs and ADUSA Supply Chain. When considered together, the local brands of Ahold Delhaize USA comprise the largest grocery retail group on the East Coast and the fourth largest grocery retail group in the nation, operating more than 2,000 stores and distribution centers across more than 20 states and serving millions of customers each week through a uniquely local omnichannel experience. The Ahold Delhaize USA company team includes just over 100 associates across all East Coast office locations. PT Quality Assurance Associate At Ahold Delhaize USA, we embrace and celebrate diversity. Our employees and prospective employees are treated with fairness, respect and dignity. We provide an equal opportunity workplace committed to hiring, training, compensating, and promoting persons based on their talents and abilities and without regard to race, religion, color, national origin, gender, sexual orientation, age, family status, veteran status, disability status, or any other applicable characteristics protected by law.