Quality technician jobs in Hamilton, OH

Apply promptly! A high volume of applicants is expected for the role as detailed below, do not wait to send your CV. Assist in the operation of the manufacturing line while ensuring the highest quality and striving for efficiency and excellence in all endeavors while adhering to all safety requirements. ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. Other duties may be assigned. Perform routine and repetitive inspection procedures to ensure quality levels at various stages of production. Inspect in-process and/or finished production assemblies and sub-assemblies for conformance to quality assurance standards. Read and follow visual aides, engineering change notices, or established operating procedures, determine acceptance or rejection of product. Work under close supervision of Manufacturing supervisor or other designated supervisor. Follow standardized and routine written directions and visual aides for assigned quality assurance inspection operations. Visually inspect products using magnifying glass, lot sampling methods, first article checks, and /or AOI machines. Enter standardized information into computerized MES system using simple keystrokes to indicate pass or failure of board. Adhere to all safety and health rules and regulations associated with this position and as directed by supervisor. Comply and follow all procedures within the company security policy. MINIMUM REQUIREMENTS High School diploma or equivalent required with at least 2 years experience in a relevant Jabil production position or equivalent external work experience. Experience in printed circuit board manufacturing or a degree in a related field preferred. xevrcyc Must be QC certified.

Join Conagra Brands in Troy, OH - home to iconic meat snacks like Slim Jim, as a Quality Supervisor. Reporting to the Plant Quality Manager, you'll lead and support QA technicians while driving quality and food safety initiatives across the facility. This hands-onrole includes audits, HACCP evaluations, GMP training, sanitation and pest control oversight, and collaboration with operations to resolve quality issues. You'll also manage supplies, review product inspections, address customer complaints, and support equipment evaluations to ensure our products meet the highest standards. Position Responsibilities Coordinates quality assurance activities (e.g., audits, training, purchasing, etc. Provides technical assistance and training to QA personnel Monitors and verifies the HACCP plan's CCPs adhering to policy and procedure Conduct GMP and sanitation audits of operations and warehouse areas Works with operations personnel on quality and safety issues Verifies operations control systems are functional and being followed Places product on hold, release or disposition as necessary while adhering to policy and procedure Evaluates damaged products Coordinates resolution of customer complaints as necessary Ensures SPC Management practices are followed Completes analytical reviews of product Other duties as assigned Position Qualifications BS Degree in Biology, Microbiology, Chemistry, Food Science or other related degree required. Education may be substituted for years of experience 3-5 years related experience required preferably in the food industry Complete understanding of Food Safety Guidelines/Good Manufacturing Practices (GMPs) and safe practices and procedures Complete understanding of HACCP Plans Understanding of government regulations (FDA, USDA) Familiar with Fundamentals of Total Productive Maintenance (TPM) Physical Requirements While performing the duties of this job, the employee is regularly required to talk and hear. The employee frequently is required to stand and walk. The employee is occasionally required to sit; use hands to finger, handle, and feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; taste and smell. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. The employee will be exposed to a noisy environment that varies from hot to cold in temperature. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. #LI-Onsite #LI-Associate #LI-BC1 Compensation: Pay Range:$63,000-$93,000 The annual salary listed above is the expected offering for this position. An employee's actual annual salary will be based on but not limited to: location, relevant experience/level and skillset, while balancing internal Conagra employees' equity. Conagra Brands will comply with applicable law regarding minimum salaries for exempt employees. Our Benefits: We care about your total well-being and will support you with the following, subject to your location and role: Health: Comprehensive healthcare plans, wellness incentive program, mental wellbeing support and fitness reimbursement Wealth: Great pay, bonus incentive opportunity, matching 401(k) and stock purchase plan Growth: Career development opportunities, employee resource groups, on-demand learning and tuition reimbursement Balance: Paid-time off, parental leave, flexible work-schedules (subject to your location and role) and volunteer opportunities Our Company: At Conagra Brands, we have a rich heritage of making great food. We aspire to have the most impactful, energized and inclusive culture in food. As a member of our 18,000+ person team across 40+ locations, you are empowered to reach your potential, make an impact and own your career. We're in the business of building champions - within our people and our iconic brands like Birds Eye , Slim Jim and Reddi-Wip . Our focus on innovation extends beyond making great food, it also reflects our commitment to embracing new solutions that positively impact our team, the communities we serve and the health of our planet. Foodies Welcome. Conagra Brands is an equal opportunity employer and considers qualified applicants for employment without regard to sex, race, color, religion, ethnic or national origin, gender, sexual orientation, gender identity or expression, age, pregnancy, leave status, disability, veteran status, genetic information and/or any other characteristic or status protected by national, federal, state or local law. Reasonable accommodation may be made upon request.

Now Hiring: Flavor Science Technician Day Shift | Flexible start time (7:00-8:30 AM) Starting at $22/hr - higher for highly qualified candidates Are you passionate about food science, innovation, and hands-on lab work? We're seeking a Flavor Science Technician to support a growing flavor science team through sample preparation, benchtop experiments, and sensory evaluations. This role is ideal for someone who is curious, detail-oriented, and excited about contributing to product development in a fast-paced environment. What You'll Do Prepare batches for testing alternate ingredients and substitutions Conduct sensory evaluations (taste, smell, appearance) Use internal software systems for research, documentation, and sample shipments Assist with sample preparation, lab inventory, and ingredient management Perform basic testing, record results, and complete mathematical conversions Maintain a clean, safe, and organized laboratory environment Support food safety practices and general plant safety Assist with related tasks and technical projects as needed What We're Looking For Bachelor's degree or relevant experience in Food Science, Chemistry, Nutrition, Quality, or related scientific fields (preferred) 1+ years of lab technician experience (preferred) Highly organized and detail-oriented with strong time-management skills Ability to identify subtle sensory differences Solid problem-solving skills and effective communication Strong teamwork and collaboration mindset Comfortable with general computer applications and data entry Work Environment Combination of lab, office, and plant environments Includes standing, walking, sitting, lifting, and hands-on lab activities If you're excited about working in flavor development and want to build your career in a science-driven environment, this could be an excellent fit.

We are looking for skilled Process Technicians with at least 1 year of experience in a production environment at our facility in Medina, OH. Our Technicians are responsible for operating and maintaining plastic injection blow molders and extrusion machines, ensuring our products meet all qualitystandards and customer expectations. Shifts: 1st: 7am-3pm ($20.00/hr) 2nd: 3pm-11pm ($22.50/hr) What we offer: Direct Hire: This is a permanent placement, with benefits starting on day 61. Benefit Packages: Options to select plans made to fit your family's needs, including; 401k, PTO, medical, vision & dental. Stability: While other companies are laying off, we're hiring to keep our business strong - even during uncertain economic times. What Process Technicians do: Operating extrusion and blow-molding manufacturing production machines and equipment. Monitoring and adjusting production machine settings (heat control, water cooling temperatures, hydraulic pressure) to keep production running smoothly. Troubleshooting machines and doing basic maintenance. Checking product quality to assure it meets customer specifications (e.g., bottle weights, dimensions). Teaming up with your co-workers to identify continuous improvement opportunities. Learning new skills with hands-on training and career development opportunities. What's needed to be a Process Technician? Mechanical inclination - you like to fix things, use tools, work with your hands. At least 1 year of experience operating manufacturing equipment in a high-volume production environment. Knowledge of extrusion or blow molding machines and equipment is a plus! Basic understanding of hydraulics, pneumatics, and electromechanical systems is a plus! Strong problem-solving and mechanical troubleshooting skills. Ability to lift up to 50 lbs. with or without a reasonable accommodation. As a Plastipak Associate, you receive a benefits package offering the following: Wellness Programs Health Insurance Coverage, including Medical, Dental & Vision EAP, Employee Assistance Program Life Insurance Accidental Death & Dismemberment Insurance Disability Insurance: Short-Term & Long-Term Accidental Insurance Critical Illness Insurance Hospital Indemnity Insurance 401(k) Plan, with Company Matching Contribution & Profit Sharing feature Paid Time Off - 80 hours within 1st year & subsequent increases Paid Company Holidays Dependent Care Flexible Spending Account Caregiving via Care.com Pet Insurance Tuition Assistance Program Sons and Daughters Scholarship Program Travel Assistance Employee Discount Programs *Some benefits are subject to eligibility requirements Plastipak is an Equal Opportunity Employer In order to process your job application, Plastipak collects and stores the personal information that you submit via this website. Please refer to Plastipak's Privacy Policy to understand how Plastipak uses and protects the information that you provide.

Job Titles: Quality Inspector Shift time: Monday - Thursday - 2nd shift - 3:30pm - 2am Performs new and routine inspections, checks, tests and sampling procedures of standard parts. Responsible for receiving, in-process, or final inspections as required. Duties and Responsibilities Responsible for utilizing aptitude in measurement techniques, metrology, and blueprint reading and verify operators are accurately measuring and recording dimensions on IP sheets or other documentation. Perform first article and first piece approval for operators. Perform inspection duties for in-process and final inspection. Complete and review non-conformance documentation. Support quality improvement and cost savings initiatives, as required. Assist Quality Engineers, as required. Assist in other production areas, as needed. Perform other quality or document control duties, as assigned. Perform part measurement on CMM.

We are seeking a Process Technician to support operations at asingle manufacturing site and across customer locations. This role is critical in ensuring smooth onboarding of new jobs, validating processes handed off by R\&D, and maintaining sustainable production practices. Additionally, the Process Technician will provide technical support to ensure productsremain in spec, lead quality and efficiency improvements, and assist with new product development initiatives. The ideal candidate will be highly organized, detail-oriented, and skilled at translating technical requirements into practical, repeatable processes while responding quickly to production challenges. Why work at MCC: Competitive Compensation Generous benefits package including medical, dental, vision, disability, life insurance, and 401(k) Paid Holidays: New Year's, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Day after Thanksgiving, Christmas Eve, Christmas Day, plus two floating Holidays Key Responsibilities: Job Onboarding: Lead the introduction of new products or jobs into production, ensuring readiness and alignment with plant capabilities. Training & Support: Develop and deliver training for floor personnel on new processes, equipment, and best practices. Process Validation: Confirm that R\&D handoffs are feasible and sustainable for long-term production. Technical Support: Provide proactive and reactive support to operators, ensuring products remain in spec and resolving issues quickly. Documentation & Standards: Create and maintain detailed process documentation, SOPs, and quality standards. Trials & Testing: Plan and execute trials to validate processes, troubleshoot issues, and optimize performance; conduct lab evaluations and comparative analysis with competitive products. Continuous Improvement: Identify opportunities to streamline workflows and enhance efficiency in label manufacturing and related operations. Customer Interaction: Support customer and MCC-sponsored new product development projects; participate in coater trials and customer visits, occasionally requiring on-site work across shifts. Quality Oversight: Maintain lab/testing equipment and calibrations; initiate raw material complaints (SNAR), track corrective actions, and manage quality holds. Qualifications: Bachelor's degree in engineering or related field (or equivalent experience); 2- or 4-year degree or 2-4 years of related experience/training acceptable. Experience in manufacturing environments, preferably in labels or similar industries. Strong problem-solving skills and ability to manage multiple priorities. Math skills (including Algebra) and knowledge of printing/converting materials and technologies. Excellent communication and training skills; ability to write reports, business correspondence, and procedure manuals. Ability to travel for internal and customer visits and trials. Other Considerations: Occasional lifting of rolls/samples up to 40-45 lbs. Work around coating and slitting equipment; safety shoes may be required. Professional attire for customer visits; flexible hours for multi-shift coverage. For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ...@mcclabel.com. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Reporting to the Quality Manager (QM), the Quality Technician (QT) will be responsible for supporting Quality Engineers in the implementation and maintenance of work instructions and procedures created to meet customer requirements. Will be supporting and leading by example in the building and maintenance of a "culture of quality" across the organization. Will work as part of a team to assure all requirements are met and are up to standards to support our goals of quality, cost and delivery. Responsible for supporting Meyer Tool's Quality Management System objectives of Quality, Cost and Delivery by processing non-conforming hardware, gathering and submitting customer required data and reviewing documentation. The QT will be responsible for ensuring conforming disposition and safe shipment of customer hardware. This position works closely with all job functions in the organization as well as external customers to ensure all aspects of part quality are met. Primary Responsibilities: 1. Process non-conforming hardware, preparing deviation reports by collecting, analyzing, and summarizing data and trends; entering data and generating reports and presentations. 2. Work closely with Quality Engineers on projects and quality implementations as well as root cause analysis on non-conformances to identify root cause and prevent reoccurrence 3. Gather and submit customer required data prior to shipment, such as eQNs, FAIRs, and C of Cs 4. Keeps track of deviation precedence to streamline review procedures and customer disposition 5. Supports Quality Engineering in development, changes, review and approval of internal work instructions 6. Submit metallurgical samples for laboratory review as necessary 7. Support over-inspection and shipment needs as required to meet customer demands 8. Participate in Continuous Improvement projects 9. Assist the Quality Manager, as needed, with RCCA investigations and information collection 10. Perform miscellaneous duties and projects as assigned and required 11. Must be able to work required hours to ensure delivery of customer product (May require flexible scheduling for training period and to meet customer demands). Requirements: * 1 year experience in a manufacturing environment * Must meet ITAR definition of US Person(s) * Must have HS diploma or equivalent * Ability to process and communicate information using Microsoft Office software * Must be able to work in a team environment and prioritize multiple tasks effectively * Sound analytical problem-solving skills, process troubleshooting skills * Willingness to immediately receive SAE DPRV training and DQR training as required * Excellent verbal and written communication skills * Strong interpersonal and leadership skills * Ability to follow instructions and communicate information to others both verbally and in writing in English * 20/25 vision (natural or corrected) * Must be able to use standard gauges: micrometers, height gauges, calipers etc. * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Preferable Experience: * Understanding of quality systems such as AS9100, ISO and NADCAP * Ability to interpret engineering drawings and/or models * Knowledge of root cause analysis tools such as 5 Whys, Failure Mode and Effects Analysis, Pareto Analysis, Six Sigma and/or equivalent quality training * Associates Degree in relevant field * 2 to 5 years of quality experience in aerospace or industrial gas turbine industry * SPC (Minitab) experience desired * MPCS experience Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand and move throughout the facility. Will use hands, frequent stretching, climbing, pushing, pulling, crouching, stooping, reach with hands and arms, and communicate. Work in manufacturing environment and use of computer (typical 2-button scroll mouse and keyboard - 80% of the work day). The employee must frequently lift or move up to 50 pounds. The noise level in the work environment may be loud. Must be able to use required PPE. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit your resume noting job inquiry #3291230925 to the Human Resources Department at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit ****************** Job Summary The Quality Technician II, Aseptic Control (Day Shift) is responsible for autonomously performing tasks related to environmental monitoring to support regulatory requirements of a sterile manufacturing site. **This a Day Shift position working 6:30am - 6pm. 2 days on, 2 days off, 3 days on, 3 days off and the rotation starts over again. Position Responsibilities Perform routine sampling activities and associated data entry. Wear gowning, sterile garments, and PPE (Personal Protective Equipment) as required by specific activities. Read and interpret diagrams, drawings, and other schematics. Prepare documentation of activities, actions, and results. Ensure proper documentation practices during job activities. Read SOPs (Standard Operating Procedures) and excerpts from technical documentation. Complete required training Perform visual inspections Use the Environmental Monitoring System to collect and analyze samples Guide others on SOPs, control documents, and/or other work instructions. Coordinate activities of support groups Ensure that others carry out laboratory duties in a manner consistent with cGMP Perform regular audits of SOPs and/or work instructions Perform routine sampling activities and associated data entry Wearing gowning, sterile garments, and PPE (Personal Protective Equipment) as required by specific activities Read and interpret diagrams, drawings, and other schematics Recommend and initiate activities to ensure area and equipment is maintained in a state of compliance Provide 24/7 "on-call" support to others Provide feedback on service and issues on a timely basis Minimum Qualifications Prior experience in a pharmaceutical production environment Must have the ability to effectively understand, read, write, communicate, and follow instructions in the English language Thorough attention to detail is required Must be capable of keeping accurate records and performing mathematical calculations Preferred Qualifications B.S. in biology or other related discipline Working knowledge of MODA, Microsoft applications Experience working in a LEAN manufacturing environment Knowledge of cGMPs and FDA policies/procedures The items described here are representative of those that must be met successfully to perform the essential functions of this job. Sponsorship or support for work authorization, including visas, is not available for this position. Resilience is an Equal Employment Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, protected veteran status, disability status, physical or mental disability, genetic information, or characteristic, or other non-job-related characteristics or other prohibited grounds specified in applicable federal, state, and local laws. Requests for reasonable accommodation can be made at any stage of the recruitment process. Resilience offers employees a robust total rewards program including an annual cash bonus program, a 401(k) plan with a generous company match and our benefits package which is thoughtfully designed to support our employees with great healthcare (including medical, dental and vision), family building benefits, life and disability insurance, flexible time off, paid holidays, other paid leaves of absence, tuition reimbursement and support for caregiving needs. Our target base pay hiring range for this position is $21.50 - $30.50 per hour. Actual base pay is dependent upon a number of factors, including but not limited to, the candidate's geographical location, relevant experience, qualifications, skills and knowledge. Excited about Resilience and the biomanufacturing revolution? We encourage you to apply and start a conversation with one of our recruiters.

Harmon, Inc. Grow your career with Harmon. Be a part of building and shaping city skylines. Are you looking for a full-time position with a company that is built on a strong set of core values, where you can work with an incredibly talented team? If your answer is YES, apply today so we can connect and share more about our Quality Tech position and how you can grow your career with us! WHAT YOU'LL DO: You will demonstrate leadership by ensuring products meet the required quality standards of Harmon. In demonstrating leadership, you will need to be proficient in providing feedback to team members. You will conduct testing procedures during the manufacturing process to ensure products comply with quality standards. You will conduct routine and non-routine audits and analyses of all material that enters and exits the manufacturing plant. You will participate and drive safe working conditions and continuous improvement. You will need to be proficient in communicating clearly and assertively to co-workers while being engaged and motivated to enhance quality procedures. SALARY: Starting at $20/hour WHEN YOU COULD WORK: 10 Hour Shift: Monday-Thursday Overtime available! WHAT YOU'LL NEED: High school diploma or equivalent (preferred) 1-3 years of related work experience; or equivalent combination of education and experience Curtain wall industry experience highly preferred Basic math, reading, and computer skills Effective communication skills Ability to work in a controlled-paced environment Contribute to a safe & enjoyable work environment Able to work collaboratively with a team and leadership Must be able to push, pull, and lift between 30 and 60 pounds Effectively manage time to meet production schedules Effectively use judgement to drive solutions Able to fully understand and interpret fabrication drawings and calipers Must take full responsibility for results, regardless of the outcome Our Benefits We care about and invest in our employees. We are proud to offer a comprehensive benefits package designed to support their well-being and foster professional development. Here is a glimpse of what you can look forward to if you join our team. Competitive Benefits Package for employees and their dependents (Medical, Dental, Vision, Life, Disability) Incentive Plans 401(k) with employer contribution and match Employee Stock Purchase Plan with employer match Paid Time Off (Vacation and Sick Time) Paid Holidays Tuition Reimbursement Program Employee Assistance Program (EAP) Wellness Program Training and Career Progression Apogee and our brands are an Equal Opportunity Employer.

Job Description The Quality Technician plays a critical, hands-on role in ensuring that every AeroFlexx pak meets defined quality and performance standards. This position performs visual and dimensional inspections of filled and unfilled paks, verifying conformance to specifications and ensuring consistent product quality. Working directly on the production floor and in the lab, the Quality Technician partners with Operations and Quality leadership to identify issues in real time and maintain compliance with company procedures and Good Manufacturing Practices (GMPs). Key Responsibilities Perform visual, dimensional, and functional inspections of filled and unfilled AeroFlexx paks per defined test plans and frequency. Use measurement tools such as calipers, scales, custom testing equipment, and gauges to verify key dimensions and attributes. Accurately document inspection results in a computer including defects, non-conformances, and measurements, in the designated quality system. Immediately communicate quality concerns to Quality Leadership to ensure timely corrective action. Support line start-up verification, pak appearance checks, and final release inspections. Support environmental monitoring sampling as directed. Follow all company Good Manufacturing Practices (GMPs), hygiene, and safety procedures. Participate in continuous improvement activities and provide feedback to improve inspection methods and consistency. Qualifications High school diploma or equivalent required Minimum 1-3 years of experience in a manufacturing inspection role (packaging or food/beverage experience a plus). Must be fluent in English; it would be great if you also speak Spanish Ability to use common measurement devices such as calipers and scales. Strong attention to detail and accuracy in documentation. Comfortable working in a hands-on, fast-paced production environment. Basic computer skills (data entry, Excel, and quality records). Must adhere to all GMP, safety, and company policies. Willingness to work flexible hours as needed to support production. Willingness to support production-related tasks as assigned, even when not directly related to quality inspection activities. Why Join AeroFlexx Be part of an innovative company transforming packaging sustainability. Competitive benefits package (Premiums for medical covered at 90%; dental & vision 100% covered) Equity (all AeroFlexx Employees have equity!) Accrued Personal Time Off and Sick days Growth opportunities in a collaborative, team-oriented environment. A workplace where quality and innovation are valued every day.

Job Scope: The Quality Control Technician is to be proficient in every aspect of performing the functions of this position. The Quality Control Technician's overall responsibility, and objective, is to ensure that all aspects of the SQF, Quality, and Food Safety Programs are followed by all employees, vendors, visitors, etc. Duties and Responsibilities: Routinely check operator paperwork for accuracy and completeness. Routinely check labels, bags, and seals for accuracy. Assure checks are documented clearly, cross referenced and traceable. Communicate results of routine QA tests to production personnel. Notify supervisory personnel and Quality Control and Food Safety Manager of product quality or plant conditions which may have a negative impact on product quality and work together to correct the situation. In the case of finished product, perform follow-up testing until situation is corrected and product disposition is resolved in a quality conscious manner. As directed and trained, conduct various tests for incoming ingredients, including sieve, NIR, moisture, and mycotoxin testing. Maintain and report hold/reject product and assure its proper disposition. Collect routine ingredients and finished product samples, as required (detailed in QA Manual). Train and educate all personnel on quality and food safety practices. Promptly respond to calls for assistance clearly communicating and ETA of arrival. Promptly respond to quality/food safety concerns, following up as needed. Follow First In First Out (FIFO) and enforcing other departments to follow the same process. Continuously work with and/or assist production, maintenance, and sanitation personnel as needed throughout the shift. Maintain a clean work environment and stock supplies as needed for next shift. Ensure, and hold accountable, all personnel, visitors, vendors, etc. comply with all Standard Operating Procedures (SOPs) in addition to all SQF, Quality, and Food Safety Programs. Maintain accurate, complete, and legible paperwork. Assist Quality Control and Food Safety Manager with all other duties/tasks as needed. Be an employee champion who will maintain a strong and positive working relationship with all employees with the utmost integrity, confidentiality, and ethical values. Additional Job Functions: Assist in maintaining a positive team environment and good working relationship by maintaining a positive attitude toward all Diamond team members, vendors, and customers. Participate effectively in a team atmosphere by modeling and promoting conflict resolution, diversity, ethical practices, and organizational citizenship. Responsible for other duties as deemed necessary by Management. QUALIFICATIONS: Must be willing to/have availability to work any shift (day or night shift). Ability to work independently without immediate direction or oversight. Self-motivated with a high degree of initiative and integrity Excellent communication skills, both oral and written, to effectively communicate in a professional manner. Excellent interpersonal skills (communication, listening, team player, cooperative, approachable). Ability to be organized, flexible, and perform acceptably under pressure. Must be able to take directions, work efficiently and safely. Must be able to stand, sit, and walk for long periods including on a catwalk. Must be capable of lifting, carrying, pushing, and pulling up to 50 pounds routinely. Must be capable of overhead work and manual dexterity for manipulating or moving objects. Must be able to climb both stairs and ladders up to a high elevation. Must be able to balance, stoop, kneel, crouch, and crawl. Must be able to operate a forklift. Must be able to perform moderate to heavy labor under constant machine operation and other noise. Education & Experience Recommendations: Quality experience at a food processing facility preferred. High School Diploma or GED required.

Description Quality Assurance Technician JBS is seeking an hourly Quality Assurance 2nd Shift Team Member! Position starts at $20.50 per hour Benefits Include Paid vacation and holidays Medical, dental and vision benefits 401(k) plan Better Futures Program Onsite Cafeteria Career development opportunities Essential Duties and Responsibilities Conducts quality assurance testing on products and raw materials on the plant floor. Utilizes and/or adapts inspection equipment to meet quality control standards, make suggestions about procedures, standards and equipment to facilitate work and maintain product quality. Investigate and determine cause of faulty work and consult and advise production supervisors as to corrective measures. Ensures that sell-by and production dates are correct on product runs. Analyze facts or circumstances surrounding individual problems to determine what action should be taken within the limits of standard practices. Measuring and testing product and tabulating data concerning materials, product, or process quality and reliability. May assume other duties as assigned. Qualifications High School Diploma or equivalent certification Experience in food manufacturing quality control preferred Ability to speak, read, and write English Good verbal and written communication skills Bilingual (Spanish) preferred Good math skills Must be well-organized with good attention to detail Display strong work ethic and positive attitude Adaptable and dependable with ability to follow direction and work cooperation with others Must maintain a helpful and professional attitude and appearance Ability to apply common sense understanding to carry out detailed, but uninvolved, instructions and to deal with problems involving a few different variables. Work Environment ACTIVITIES: Manufacturing work on the plant floor, standing or sitting for long hours, bending, stooping, and lifting. HEARING: Must be able to hear average or normal conversations and receive ordinary information, sometimes with loud background noise. REPETITIVE MOTION: Must be able to frequently and regularly use wrists, hands, and or fingers. VISUAL ABILITIES: Average, ordinary visual acuity necessary to prepare or inspect documents, products, or operate machinery. PHYSICAL STRENGTH: Regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 100 pounds throughout the day. WORKING CONDITIONS: Must be able to work for long hours in a no-kill food processing environment, where it is wet, damp, and cold. Employees are expected to remain in these conditions for most of their work days About JBS JBS USA is a leading global provider of diversified, high-quality food products, including a portfolio of well-recognized brands and innovative, easy-to-use food solutions. We process, prepare, package and deliver fresh and value-added premium meat, poultry and retail-ready food products for customers in approximately 100 countries on six continents. We are also the majority shareholder of Pilgrim's, the largest poultry company in North America. JBS USA employs more than 100,000 team members, and our corporate office is located in beautiful Greeley, Colorado, where our 1,200 team members onsite enjoy more than 300 days of sunshine a year. Our Mission To be the best in all that we do, completely focused on our business, ensuring the best products and services to our customers, a relationship of trust with our suppliers, profitability for our shareholders and the opportunity of a better future for all of our team members. Our Core Values Availability, Determination, Discipline, Humility, Ownership, Simplicity, Sincerity EOE/Vets/Disability

Company

Company

Job Description Maverick Molding Co Maverick Molding offers a diverse line of high-temperature resins, polymer composites and Superimide-branded products designed and manufactured to withstand the most demanding temperatures. Maverick Molding is vertically integrated with the material capabilities, processes and equipment to conform to stringent OEM and industry requirements. Pacific Piston Ring Co., Inc. Pacific Piston Ring Co., Inc. has offered a variety of Piston Rings primarily to the aerospace market and is in the process of relocating from California to Blue Ash, Ohio so we are growing our team to accommodate the growth. Both companies will be located at 11379 Grooms Rd. Blue Ash, OH 45242. Maverick Molding Co and Pacific Piston Ring Co., Inc. believe that our employees are important to our success and strive to provide a company culture that is positive and inviting. Everyone matters and we value how people are treated. We encourage Diversity, Equity, and Inclusion. Job Summary The Quality Technician position is responsible for performing all duties necessary to inspect and verify materials and products meet the applicable requirements and to record all results and notify appropriate personnel of any discrepancies. This can include performing measurement system analysis, dimensional studies, auditing, root cause and corrective actions, first article inspections, receiving inspection or becoming a designated supplier quality representative. Fulltime 1st Shift - OT as required. Responsibilities: Be able to read and follow written instructions. Proficient in the use of handheld measurement equipment such as Calipers, Micrometers, Indicators, etc. Be able to read simple engineering drawings and interpret specifications. Responsible for timely completion of assigned jobs Comply with safety and OSHA regulations and maintain clean and orderly work areas. Ethical Conduct Communication Proficiency Results Driven self-starter. Ability to work within a team and support the site. Previous experience working in a manufacturing inspection environment is preferred. High School Diploma / GED required. Must be computer literate and be able to use Microsoft Office products Excel, Word, Outlook Must possess 20/25 or better near vision with or without corrective lenses and be able to pass a color vision test. Must pass a Drug Test and background check prior to hiring. Competencies Ethical Conduct Communication Proficiency Results Driven self-starter. Ability to work within a team and support the site. Previous experience working in a manufacturing inspection environment is preferred. High School Diploma / GED required. Must be computer literate and be able to use Microsoft Office products Excel, Word, Outlook Must possess 20/25 or better near vision with or without corrective lenses and be able to pass a color vision test. Must pass a Drug Test and background check prior to hiring. Requirements Previous experience working in a manufacturing inspection environment is preferred. High School Diploma / GED required. Must be computer literate and be able to use Microsoft Office products Excel, Word, Outlook Must possess 20/25 or better near vision with or without corrective lenses and be able to pass a color vision test. Must pass a Drug Test and background check prior to hiring. Benefits 401(K) Retirement Plan with Company Match Medical, Dental, Vision - Complete Health Care Package Company paid short-term, long-term and life insurance. 10 Paid Holidays Vacation and Sick Time Safety shoe and eye glass allowance Maverick Molding Co and Pacific Piston Ring Co., Inc. are Equal Opportunity Employers committed to Diversity/M/F/D/V #hc178591

Hiring Immediately - Warehouse Quality Technician - Hebron, KY:Inergroup is hiring immediately for Warehouse Quality Technician jobs in Hebron, KY. As a Quality Technician, you will assist the shift quality team in delivering high level results by supporting the Quality system through production batch record creation, review, and release. Weekly pay starting at $17/hr. Responsibilities: Conduct standardized qualitative and quantitative testing to ensure product meets specifications. Monitors product quality; identifies and isolates product that does not meet standards. Recognizes deficiencies and initiates proper follow-up. Aids in troubleshooting and supports resolution of incoming materials issues. Directs product control and release processes in WMS and SAP Communicates quality results and issues both internally and externally Supports quality work processes - Deviations, Mock Recall, CaPA, etc. Follows and enforces all the policies and procedures set forth to promote quality and regulatory compliance, safety and report any outages. Requirements: Quality Assurance work experience (FDA regulated business preferred) Demonstrated ability to complete and review very detailed and sensitive documentation. Excellent problem-solving skills Working knowledge of cGMP's Possess high professional ethics, dependability, good judgment and ability to take decisive action Effective communication (verbal and written) and interpersonal skills Adhere to company safety standards Apply Now:Click on apply now for immediate consideration for these Warehouse Quality Technician Jobs in Hebron, KY. We are urgently hiring!

The Quality technician inspects and test product and materials per customer specifications and meets regulatory requirements maintaining quality and safety standards. She/He prepares and keeps records of final inspections, follows traceability, and maintains supporting documentation as required by QQE and their customers. Primary Responsibilities Clean parts as required Inspect and test product for both cosmetic flaws, dimensional, and/or other product characteristics per prescribed methods and requirements Identify and follow critical control points and preventive measures Verify and record required data such as critical features and certifications as needed Handle product in such a way to reduce the introduction of additional contamination and damage Verifies CMM print outs and identify any discrepancies. Communicate with Office and shop personnel any problems or concerns about product quality or customer requirements Write non-conformance reports as required Review routers for completeness and accuracy as routers come into inspection. Laser engraves parts as needed per procedure Print and scan barcode labels, shipping labels and shipping papers as required Print shipping labels and shipping papers as required Package product per both QQE and customer requirements Perform tasks to meet the requirements of the QQE Quality Management System such as record and document control Print and scan barcode labels as needed Monitor operations for quality achievement and compliance with established processes and procedures by executing internal audits as assigned Participate and support the implementation of new programs and changes by performing and supporting continuous improvement initiatives Support and be part of corrective and preventive action plans May interact with internal and external customers and meet customer requirements Other duties as assigned Qualifications: Knowledge: Must be a high school graduate and have experience in process improvement techniques. Preferably with an associate's degree in an industrial or manufacturing technology field or an equivalent combination of education and experience. A degree with a quality background is preferred. 2-3 years of experience in manufacturing and/or quality environment. Abilities: Good conceptual capabilities and must be meticulous in their work. Must have attention to detail and ability to exercise sound judgment; also, must be able to read drawings and identify critical features. Must have the ability to communicate verbally and in writing, work as part of a team to ensure achievement of company goals, consistently follow set procedures on inspection techniques and practices as QQE and customers require, and legible penmanship is a must since many inspections require documentation that they will be required to fill in. Skills: Working knowledge of controls and instrumentation, as well as computers to be able to work and maintain records, etc. Must be skilled in quality processes and knowledgeable about measurement and test equipment. Proficient in the use and operation of measuring tools such as micrometers, calipers and profilometer. Physical Demands: Must be able to lift 50 Lbs. and eyesight of 20/20 with or without corrective lenses

This position is responsible for pulling samples, completing product analysis, performing load QA task and coordinating all certificates of analysis for Anchor Ingredients Transload. RESPONSIBILITIES: * Opening load information and filling in driver and item information in ERP system on the computer * Probing trucks using grain probe to obtain composite sample * Perform quality testing on in-process samples and lot/load samples * Perform mycotoxin testing on samples * Perform calibration and maintenance activities on label testing equipment * Complete daily check samples on NIR * Maintain clean environment for lab are and label equipment * Keep inventory of testing supplies and notify QA Manager when we need to reorder * Generate COA's for all outbound orders * Print COA's and send with drivers * Email COAs to the customer QA department * Review internal lab results for compliance to specifications * Work alongside customer service, operations and the rest of the quality team to ensure compliance with Anchor and customer requirements * Assist in the implementation of internal quality documentation including product specifications, QA procedures, etc. Process Improvement * Provide guidance to plant operators regarding standard operating procedures related to quality, sanitation and safety * Assist with quality project management as it relates to product testing, product specifications, process improvement and audits * Proactively identify opportunities to increase operational efficiencies Safety * Support and adhere to the Company's Safety Program. General Responsibilities * Project work or items outside of this , as specified from time to time by the QA Manager and other Managers. * In common with all other personnel within Anchor Ingredients, the Job Holder is required to adhere to the Company's policies on Safety, Hygiene and good housekeeping. Specifically: * To take reasonable care for the health and safety of himself/herself and that of other persons who may be affected by his/her acts or omissions; * To co-operate regarding any duty or requirement; * To report to his/her immediate manager any hazard which may be discovered on at the place of work. QUALIFICATIONS: The ideal candidate will possess the following: * Meticulous attention to detail and accuracy in work product * Demonstrated problem solving experience * Proficient in Microsoft Office products including Outlook, Excel and Word * Ability to see the big picture while focusing on the process and procedures necessary to produce deliverables * Ability to establish and meet deadlines * Flexibility and the ability to thrive in a fast-paced environment * Excellent interpersonal skills and a team player WORK ENVIRONMENT & PHYSICAL DEMANDS The work environment characteristics and physical demands described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This job operates within both a professional office environment as well as ingredient processing facilities. While performing the duties of this job within the processing facilities, the employee will be exposed to machinery and moving parts. The employee may be exposed to adverse weather conditions, high precarious places and confined spaces, & airborne particles including grain dust and hazardous materials or fumes, which may require the use of PPE. The noise level in some of the work environments may require the use of hearing protection. While performing the duties of this job inside the office, the employee is frequently exposed to normal working conditions for an office environment with a noise level that is usually quiet to moderate. While performing the duties of this job, the employee is regularly required to talk or hear. The employee may be required to stand for long periods of time as well as use hands or fingers to reach or handle, and to reach with hands and arms. The employee is regularly required to stand, walk, climb, balance, stoop, kneel, crouch, or crawl. The employee will occasionally lift and/or move up to 40 pounds. All vision abilities are required to encompass close-up work. On occasion, employee must be able to tolerate and endure extended seasonal hours and maintain alertness to meet deadlines. ABOUT THE COMPANY: Headquartered in Fargo, ND, Anchor Ingredients is the most customer-centric, innovative and transparent farm-to-food partner, dedicated to delivering premium ingredients and added value services to the food and pet food industries. Our farm-level relationships, combined with our global reach, allow us to efficiently procure and process ingredients from around the region and throughout the world, uniquely positioning us to fulfill our customers' diverse ingredient requirements. We take pride in our world-class team which boasts extensive industry experience combined with an unwavering dedication to our company's mission, vision and values, and a commitment to delivering quality and innovation throughout the entire food supply chain. DISCLAIMER: This is not a complete description of responsibility, but reflects the general qualifications, duties and/or responsibilities necessary to perform this position. Anchor Ingredients reserves the right to revise the job description. All candidates who receive a written offer of employment will be required to successfully pass a background check, as well as testing for commonly abused controlled substances in accordance with the company's Drug Free Workplace Policy. Anchor Ingredients is an at-will employer, which means that either the employee or the company may terminate the relationship at any time, with or without notice, and with or without cause. We are an equal opportunity employer. 2nd shift Monday to Friday 3:00pm - 11:30pm

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the world's largest bottler for retailers and A-brands. Our products are distributed worldwide from our production sites in Europe and North America. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Starting pay: $20/hr Essential functions · QA Techs are responsible for ensuring adherence to food quality and food safety rules and regulations as required by the quality standards and/or Safe Quality Food requirements · Ensure all products being run conform to the product specifications as outlined in SAP by conducting analysis on raw deliveries, syrup batches, and treated water · Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials (acceptable or not) · Maintain accurate, legible records of all tests and retests performed · Work closely with all departments to improve quality, increase efficiencies, increase yields, and eliminate out of specification or damaged product · Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity · Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, and seaming checks. · Maintain laboratory cleanliness · Complete special projects and other reasonable duties as assigned by senior support Required Skills and Competencies · Strong computer skills · Proficient in Excel, Word, SAP, and PowerPoint · Strong analytical skills, problem solving skills, and results oriented · Organized, detail oriented, and adaptable to change Working Conditions: · Physical- Most if not all days in this position require continuous standing or walking along with a requirement to lift, handle, or carry material of moderate weight · Visual/ Sensory- This position requires regular need to give moderate attention with one or two senses at a time · Work environment- Nature of work and environment are repetitive however tasks may vary day to day · Mental Stress- There is pronounced pressure from deadlines, production quotas, and accuracy demands as well as similar stresses day to day. These descriptions are generalized and do not cover all responsibilities and expectations of this position. Other tasks may be assigned by senior support as needed. A Career with Refresco Refresco offers a competitive salary and comprehensive benefits, which include: Medical/dental/vision insurance Life insurance 401(k) savings plan with company match Paid holidays and vacation Well-being benefits Discount programs Join Refresco TODAY and enjoy a rewarding CAREER! Equal Opportunity Employer Refresco is an Equal Employment Opportunity/Affirmative Action employer. Refresco does not discriminate against qualified applicants or employees based on race, color, age, religion, sex, pregnancy, national origin, ancestry, age, physical or mental disability, veteran status, status in uniformed services, sexual orientation, gender identity, gender expression, marital status, genetic information, or any other status protected by law.