Quality technician jobs in Jenks, OK - 147 jobs

The QA Technician is responsible for monitoring NSP's Quality Assurance Program, maintaining Quality Standards and Quality Integrity for NSP. Ensuring that daily production operates within company and customer standards. Capable of making decisions based on standards provided by NSP QA Management. ESSENTIAL DUTIES AND RESPONSIBILITIES The essential functions include, but are not limited to the following: Monitor production for compliance with USDA, GMP, HACCP, and company standards. Conduct quality checks and routine product testing (e.g., temperature, pH, moisture). Maintain accurate records and ensure documentation meets regulatory/audit requirements. Support audits and assist in implementing food safety and quality procedures. Collaborate with production and sanitation teams to uphold food safety and provide guidance. Report deviations and communicate quality/safety concerns promptly.. Other duties as assigned. QUALIFICATIONS (Knowledge, Skills, and Experience) High school diploma or GED required; degree in food science or related field preferred. Experience in food safety or quality roles in meat/food manufacturing preferred. Knowledge of HACCP, GMP, SSOP, and food safety regulations. Detail-oriented with strong communication, teamwork, and computer skills. Able to work in cold, fast-paced, and regulated environments; bilingual skills a plus. PHYSICAL DEMANDS AND WORK ENVIRONMENT The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodation may be made to enable individuals with disabilities to perform the functions. While performing the duties of this position, the employee is regularly required to have a full range of body motion including twisting, bending, reaching outward, pushing, pulling, intensive hand/wrist movement and lifting to meet the NSP minimum required pounds per day which is up to 50 pounds (unassisted). The employee must be able to walk and stand for a significant amount of time on even concrete surfaces, which may at times be slippery due to marinades, water, and other liquids associated with the production process. Due to noise levels in the work environment, the use of hearing protection is required. The employee must have good, corrected vision to see details at close range or at a distance. The employee will be working in a climate-controlled environment of -40ºF to -45ºF. The employee may be exposed to strong odors such as raw meat and marinades from seasoned meat. While in the production area, the employee is required to wear Personal Protective Equipment (PPE) to include hair and beard nets, rubber soled shoes, smocks, hearing protection and hard hats.

Job Description Crusoe's mission is to accelerate the abundance of energy and intelligence. We're crafting the engine that powers a world where people can create ambitiously with AI - without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that's setting the pace for responsible, transformative cloud infrastructure. About This Role: As our Quality Control Technician focused on switchboard testing, you will be instrumental in guaranteeing the quality and operational readiness of the electrical distribution systems that power our cutting-edge AI infrastructure. You will be responsible for executing comprehensive testing protocols for switchboard assemblies at various stages of production. Your understanding of electrical testing principles, safety regulations, and switchgear functionality will be essential in identifying and mitigating potential issues before deployment. This role requires a proactive and detail-oriented individual with strong analytical and problem-solving skills, coupled with a solid background in electrical testing and quality control within a manufacturing environment. You will collaborate closely with engineering and production teams to ensure adherence to specifications and maintain the highest levels of product quality. This is a full-time position where your expertise will directly impact the reliability and safety of our mission-critical infrastructure. What You'll Be Working On: Switchboard Testing and Inspection: Execute comprehensive testing procedures for switchboard assemblies, including but not limited to visual inspections, electrical continuity tests, insulation resistance tests, functional tests, and operational checks. Test Procedure Execution: Follow detailed test procedures and checklists to ensure consistent and thorough evaluation of switchgear performance against engineering specifications and industry standards. Electrical Testing and Verification: Execute electrical testing procedures, including continuity testing, insulation resistance testing, functional testing, and other relevant electrical tests to ensure switchboard meets performance specifications and safety requirements, energized functionality testing. Test Equipment Management: Ensure that all electrical testing equipment is properly calibrated, maintained, and operated according to safety guidelines. Test Equipment Operation and Maintenance: Proficiently operate various electrical testing equipment (e.g., multimeters, megohmmeters, Hi-Pot testers) and ensure proper calibration and maintenance of this equipment. Data Acquisition and Reporting: Accurately record and document test data, identifying trends, discrepancies, and potential failure points. Generate clear and concise test reports summarizing findings. Non-Conformance Reporting: Document any test failures or non-conformances, and collaborate with engineering and production teams to support root cause analysis and the implementation of effective corrective and preventive actions. Quality Standards and Compliance: Ensure all testing activities adhere to relevant industry standards, safety regulations (e.g., NEC, NFPA 70E, UL 891, IEEE, ANSI), and internal quality management system requirements. Cross-Functional Collaboration: Work closely with electrical engineering, manufacturing, and quality assurance teams to resolve testing issues, provide feedback on design for testability, and contribute to continuous improvement initiatives. Training and Guidance: Provide training and guidance to production personnel on basic quality checks and testing procedures related to switchgear assemblies. Documentation Control: Maintain accurate and organized records of all test procedures, test results, and calibration records. Other Duties: Undertake other quality-related tasks and projects as assigned to support overall operational efficiency and quality objectives. What You'll Bring to the Team: Education: Minimum High School graduate or GED; Associate's or Bachelor's degree in Electrical Engineering Technology or a related field is preferred, and equivalent field experience will be considered. Experience: Minimum of five years' experience in electrical testing and quality control roles, with a strong focus on testing medium and/or low voltage switchgear assemblies. Electrical Testing Knowledge: Thorough understanding of electrical testing principles, methodologies, and safety practices. Switchboard Familiarity: Comprehensive knowledge of switchgear components, functionality, and relevant industry standards (e.g., NEC, NFPA 70E, UL 891, IEEE, ANSI). Technical Proficiency: Demonstrated ability to interpret and understand electrical schematics, wiring diagrams, and technical specifications. Test Equipment Expertise: Hands-on experience operating and maintaining various electrical testing equipment. Computer Skills: Proficient in basic computer applications, including Google Suite (mail, drive, docs, sheets) and Microsoft Office (Word and Excel). Physical Requirements: Ability to perform physical tasks associated with testing and inspection, including standing, walking, bending, and lifting components as needed. Requires good manual dexterity and visual acuity for detailed inspection and operation of test equipment. Safety & Compliance: Willingness to strictly adhere to all safety regulations and participate in required safety training programs. This position is located in a safety-sensitive facility and may require participation in drug and alcohol programs. Company Values Alignment: Your personal values resonate with Crusoe's core principles. Soft Skills: Exceptional attention to detail and a strong commitment to electrical safety and product reliability. Excellent analytical and problem-solving skills for diagnosing and resolving electrical issues. Strong communication and interpersonal skills to effectively collaborate with cross-functional teams. Bonus Points: Certifications related to electrical testing or quality control (e.g., NETA certification). Experience with automated testing systems. Knowledge of data acquisition and analysis software. Experience in a manufacturing environment with high-reliability electrical equipment. Familiarity with root cause analysis and corrective action processes for electrical failures. Benefits: Hybrid work schedule Industry competitive pay Restricted Stock Units in a fast growing, well-funded technology company Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents Employer contributions to HSA accounts Paid Parental Leave Paid life insurance, short-term and long-term disability Teladoc 401(k) with a 100% match up to 4% of salary Generous paid time off and holiday schedule Cell phone reimbursement Tuition reimbursement Subscription to the Calm app MetLife Legal Company paid commuter benefit; $300/month Compensation Range Compensation will be paid in the range of up to $23 -$30/hr + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicants knowledge, education, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

+ Maintains and repairs machinery such as engines, motors, pneumatic tools, conveyor systems, and production machines and equipment. Performs maintenance and repairs to physical structures of facility. + Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. + The requirements listed below are representative of the knowledge, skill, and/or ability required. + Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. **Experience:** + Minimum three to five years related experience and/or training; or equivalent combination of education and experience. **Skills:** **Language Skills:** + Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. + Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. + Bilingual (English Spanish) preferred. **Mathematical Skills:** + Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. + Ability to compute rate*** ratio, and percent and to draw and interpret bar graphs. **Education:** + Minimum High school diploma or general education degree (GED) **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Work Arrangement: In-office or Hybrid A Day in the Life A typical day as an Assurance Associate in Tulsa is performing audit, review, and compilation procedures for clients. Works with all phases of client engagements including workpaper, financial statement, and audit report preparation. Assists with planning and scheduling engagements. The role may also include the following: * Participates in client engagement meetings to determine timelines and objectives of an audit. * Performs audit, review, and compilation procedures for clients. * Analyzes and prepares trial balances, complex financial statements and audit reports using audit software programs, Word, and Excel. * Performs schedule computations of accruals, property, and equipment, calculates depreciation expenses and long-term debt schedules for clients. * Reconciles accounting information to control accounts. * Assists with financial analysis upon completion of fieldwork to improve client internal controls and accounting procedures. * Assists in proofing financial statements and other accounting documents. * Maintains awareness of general business trends and issues and applies that knowledge to client issues and solutions. * Performs field work at client locations as necessary. * Attends training seminars, professional development, and networking events. * Ensures timely and accurate performance on assigned projects. * Maintains compliance with project budgets, turnaround times, and deadlines. Who You Are * You have a Bachelor's degree in accounting (required). * You have 1-2 years of experience auditing in a public accounting setting. * You have a valid Certified Public Accountant license or working towards obtaining CPA license (preferred). * You have knowledge of auditing standards and accounting principles. * You demonstrate critical and analytical thinking skills. * You can communicate clearly in writing and verbally. * You have the ability to work on multiple projects and meet deadlines by setting priorities with work projects. * You establish and maintain effective working relationships with co-workers and clients. * You are proficient with computers, Microsoft Office (Word and Excel) and use of various software packages. Must be authorized to work in the United States now or in the future without visa sponsorship. Making an Impact Together People join Eide Bailly for the opportunities and stay because of the culture. At Eide Bailly, we've built a collaborative workplace based on integrity, authenticity, and support for one another. You'll find opportunities for education and career growth, a team dedicated to your success, and benefits that put your family's needs first. Hear what our employees have to say about working at Eide Bailly. Benefits Eide Bailly provides benefits such as: generous paid time off, comprehensive medical, dental, and vision insurance, 401(k) profit sharing, life and disability insurance, lifestyle spending account, certification incentives, education assistance, and a referral program. Next Steps We'll be in touch! If you look like the right fit for our position, one of our recruiters will be reaching out to schedule a phone interview with you to learn more about your career interests and goals. In the meantime, we encourage you to learn more about us on Facebook, Twitter, Instagram, LinkedIn or our About Us page. For extra assistance in your job search journey, explore -a complimentary external tool that offers career exploration, resume workshops, interview prep and other professional development options. Eide Bailly LLP is proud to be an affirmative action/equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, veteran status, or any other status protected under local, state or federal laws. LI-KP1 LI-HYBRID

for a Quality Gate Inspector at International Motors. The role involves the operation of vehicles and equipment, the use of power tools, and/or the handling of hazardous materials. Due to the critical nature of these duties, which are essential for maintaining quality and production standards, strict adherence to safety protocols is required to mitigate the risk of injury, property damage, or disruption to the manufacturing process. Schedule: Monday Through Thursday 5:00 AM - 3:30 PM OR 4:30 AM - 3:00 PM (Shift will be decided based on need of the company) Pay Rate: $23.56 per hour Responsibilities Responsible for supporting the quality department in manufacturing at the plant level by auditing buses utilizing Tulsa Bus Plant Process Standards to identify defects and readiness for customer delivery. Responsible for evaluating, validating, and making judgment calls as to any quality defects on the buses as they progress through the manufacturing line. * Work with production team members to identify quality defects. * Work with production to obtain daily quality and production goals. * Validate rework on units prior to unit acceptance. * Evaluate and audit bus units for acceptance to Tulsa Bus Plant standards. * Perform housekeeping to maintain safety in the area. * Perform other duties and activities as assigned. Minimum Requirements * At least 1 year plant manufacturing experience * At least 3 months quality experience Additional Requirements * Qualified candidates, excluding current employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States. We do not anticipate providing employment related work sponsorship for this position (e.g., H-1B status) * Understanding of ISO principles * Ability to walk/stand up to 10 hours per day * This position is safety sensitive and may involve the operation of vehicles, operation of equipment, and/or involve work with power tools, or handling of hazardous materials, that could result in injury or damage to person/property/manufacturing process Desired Skills * Positive attitude, ethics and International's values which support our company's values, and a healthy, high performance culture * Strong Communication skills both written and oral * Self-motivated with ability to work under pressure * Ability to review audits with all levels of the Assembly Team * Computer skills including Excel and Word * High School Diploma or GED preferred Benefits and Compensation We provide a competitive total rewards package which ensures job satisfaction both on and off the job. We offer market-based compensation, health benefits, 401(k) match, tuition assistance, EAP, legal insurance, an employee discount program, and more. You can learn more about our comprehensive benefits package at ******************************************** Company Overview ABOUT TRATON With its brands Scania, MAN, International, and Volkswagen Truck & Bus, TRATON SE is the parent and holding company of the TRATON GROUP and one of the world's leading commercial vehicle manufacturers. The Group's product portfolio comprises trucks, buses, and light-duty commercial vehicles. "Transforming Transportation Together. For a sustainable world.": this intention underlines the Company's ambition to have a lasting and sustainable impact on the commercial vehicle business and on the Group's commercial growth. ABOUT INTERNATIONAL From a one-man company built on the world-changing invention of the McCormick reaper in 1831, to the 15,000-person-strong company we are today, few companies can lay claim to a history like International. Based in Lisle, Illinois, International Motors, LLC* creates solutions that deliver greater uptime and productivity to our customers throughout the full operation of our commercial vehicles. We build International trucks and engines and IC Bus school and commercial buses that are as tough and as smart as the people who drive them. We also develop Fleetrite aftermarket parts. In everything we do, our vision is to accelerate the impact of sustainable mobility to create the cleaner, safer world we all deserve. As of 2021, we joined Scania, MAN and Volkswagen Truck & Bus in TRATON GROUP, a global champion of the truck and transport services industry. To learn more, visit ********************** * International Motors, LLC is d/b/a International Motors USA in Illinois, Missouri, New Jersey, Ohio, Texas, and Utah. EEO Statement We are an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. If you are a qualified individual with a disability and require a reasonable accommodation to access the online application system or participate in the interview process due to your disability, please email ********************* to request assistance. Kindly specify Job Requisition Number / Job Title and Location in response. Otherwise, your request may not be considered.

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers. If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Unless specifically stated otherwise, this role is "On-Site" at the location detailed in the job post. Job Description PRIMARY DUTIES & RESPONSIBILITIES: Inspect, reject, or accept product according to visual standard, dimensional, and other requirements. Validation/PV testing of product according to specification and other procedural requirements Documentation and recordkeeping Wear appropriate PPE. Comply with all NOV Company policies, guidelines, and procedures. Comply with all HSE policies, guidelines, and procedures. Comply with all Quality policies, guidelines, and procedures. Other duties as assigned Additional Qualifications/Responsibilities JOB REQUIREMENTS: Factory environment with large range in temperature changes Standing up to 12 hours daily Walking up to 12 hours daily Bending/Stooping up to 12 hours daily Repetitive movement (shoveling/sweeping/fastening) up to 12 hours daily. Lifting weights up to 50 lbs. Regularly Push/Pull up to 12 hours daily. Use of Forklifts Travel less than 10% EDUCATION & EXPERIENCE QUALIFICATIONS: High School diploma or equivalent is strongly preferred A minimum 2 years of previous manufacturing, assembly, or warehouse experience is preferred. Basic computer skills is required Previous experience with Microsoft Office. Ability to learn API Q1 and/or ISO 9001 principles. Must be able to properly use scales, calipers, ruler, depth gauge. Ability to adapt and be cross trained to learn all job duties as required. Ability to learn technical repair and guidelines and procedures across departments. Ability to read drawings, instructions or repair and assembly operations

We are currently seeking an experience Quality Control Inspector with an engineering and manufacturing company in Tulsa, OK. This role is responsible for inspecting and auditing mechanical components to ensure quality standards are met. The ideal candidate will excel in QA/QC processes, reporting, and root cause analysis while supporting procurement, logistics, and manufacturing functions. Hours: 6a-4:30p M-Th Pay: $25/hr Job Duties and Responsibilities: Perform QA/QC inspections and audits on mechanical assembly and testing processes. Generate and maintain QA/QC reports and perform related administrative tasks. Conduct root cause analysis and issue Nonconformance Reports (NCR). Take and transcribe minutes during training sessions on NCRs. Assist the Purchasing Supervisor with warehouse orders and tasks. Maintain organized files and recordkeeping systems. Support procurement, logistics, warehouse, and manufacturing operations as needed.

** Kemp Quarries is a leading producer of construction aggregates, primarily crushed stone, sand and gravel. These materials are most often produced from natural deposits of limestone and river sand. Our mining process typically begins with drilling and blasting the rock into smaller pieces. The material goes through various stages of crushing and screening to produce the sizes and specifications desired by our customers. Our aggregates are used in different ways within the construction industry. As an associate member of the Oklahoma and Arkansas AGC chapters, we work closely with member contractors in providing materials to meet the most stringent needs and state certifications. ◾ As a base material underneath highways, walkways, airport runways, parking lots and railroads. ◾ To help aid in water filtration, purification and erosion control including Type I and Type II Rip Rap. ◾ Used as a raw material in combination with other resources to construct many of the items that we rely on daily. ◾ Houses and apartments; ◾ Roads, bridges and parking lots; ◾ Schools and hospitals; ◾ Commercial buildings and retail space; ◾ Sewer systems; and ◾ Airports and runways. Construction aggregates have formed the underpinnings for many of our cities, towns and transportation networks. Thousands of years ago, civilizations built entire cities with stone, sand and gravel, and many of these ancient structures still exist today. Aggregates are durable, attractive, and can be used in many different applications. On average, every American uses approximately eight tons of aggregates each year. Although our principal product is construction aggregates, Kemp Quarries offers a variety of other state-approved products and services. About the Position Responsible for the sampling, inspecting and testing of all produced materials (aggregate, sand, etc.) and compare against specifications. Will also be required to be a backup to all Weighmasters along with picking up parts and delivering parts as needed. KEY RESPONSIBILITES / ESSENTIAL FUNCTIONS: ◾ Regular, reliable attendance at the worksite or assigned work location. ◾ Follow all safety and environmental rules, regulations and procedures as set forth by company policies and MSHA. ◾ Follow all company policies and local, state and federal regulations for safe working procedures. ◾ Obtain samples and perform necessary tests on various aggregate products following ASTM & ODOT standards. ◾ Preparing samples of products for customers and testing laboratories and may deliver to assure safe arrival. ◾ Records and maintains test data and other required information. This includes both written records and data input into a personal computer. ◾ Performs daily maintenance on lab and test equipment. ◾ Responsible for overall housekeeping including plant, equipment, and site. ◾ Ability to comprehend and complete all needed paperwork in a timely and accurate manner. ◾ Other duties and responsibilities related to the nature of the job may be assigned on a temporary or permanent basis as needed. PHYSICAL REQUIREMENTS: ◾ Lift objects of various dimensions and up to 75 lbs occasionally and 50 lbs frequently. ◾ Ability to repeatedly climb stairs and ladders. ◾ Ability to repeatedly balance, bend from the trunk, crawl, kneel, push and pull objects. ◾ Ability to use vibration producing tools frequently. ◾ Ability to tolerate working outdoors in all environmental temperatures and weather conditions. ◾ Ability to repeatedly reach, squat and tolerate prolonged standing/walking/sitting. ◾ Ability to frequently walk on uneven surfaces. REQUIRED SKILLS/EXPERIENCE: ◾ Ability to read, write and figure mathematical calculations. ◾ Good observation skills. ◾ Self-motivated, organized and has the ability to work without direct supervision. ◾ Excellent verbal, written and comprehension communication skills. ◾ Must work well with others in a team environment. ◾ Must be able to quickly understand and adhere to safety requirements of this position. ◾ Ability to work overtime, nights and weekends as required. ◾ Ability to work near, around or on light or heavy equipment. ◾ Willingness to work outside in all weather extremes. ◾ Ability to work near, around or on light or heavy equipment. ◾ Ability to use a computer and various computer programs such as but not limited to Microsoft outlook, word and excel. Location Pryor Quarry - Pryor OK We are an equal opportunity employer, dedicated to a policy of non-discrimination in employment on any basis including age, sex, color, race, creed, national origin, religious persuasion, marital status, political belief, or disability that does not prohibit performance of essential job functions. Federal Law prohibits the employment of unauthorized aliens. All persons hired must submit satisfactory proof of employment authorization and identity (valid driver's license. Birth certificate, Green Card, etc.) with in three days of being hired. Failure to submit such proof within the required time shall result in immediate termination.

Welcome home! At Cascades, Sustainable Development means Respecting the True Nature of our 10,000 talents. We put you first: * Group insurance & 401(k)/retirement plan with company contributions * Profit sharing plan (not once, but twice a year!) * Employee assistance program * Extra flex benefits program (health & lifestyle reimbursement program) * Contribution to the success of a Quebec-based multinational company with strong environmental values * Salary Range for Technical Service Technician from Starting at 55k yearly At Cascades you can develop your full potential, sustainably, by applying your expertise within the Cascades Tissue Group as the Quality Technician : Key Responsibilities: * Perform inspections and audits to ensure compliance with GMP and HACCP standards and company procedures. * Utilize measurement tools (e.g., tape measure) and equipment to verify specifications and quality. * Document findings and maintain accurate records in SAP ERP systems. * Support quality assurance processes and adhere to ISO 9001 standards. * Identify and report non-conformities and assist in corrective actions. * Maintain a safe and organized work environment in compliance with company policies. * Open to covering during the night shift if needed Bring out the best in yourself. Commit. Evolve. Persevere. Every day, our colleagues choose to respect their true nature by contributing with passion to our mission. You too, will put forward your strengths * Familiarity with inspection processes and quality standards. * Basic computer skills and ability to work with SAP ERP systems. * Ability to use measurement tools accurately. * Strong attention to detail and problem-solving skills. * Good communication and organizational skills. * Proficient in MS office: Outlook, Word, Excel * Physical requirements: ability to stand for long periods, lift up to 25 lbs, climb up and down the stairs * Education: High School Diploma or equivalent (required). * Certifications: ISO 9001 knowledge or certification is a plus. We look forward to meeting you! About Cascades Cascades believes in the success of an inclusive organization that values diversity within its team. All qualified candidates will be considered for this position in a fair manner. To be part of Cascades is to reveal the full potential of materials, people and ideas. We are a source of possibilities since 1964. Cascades have been providing sustainable, innovative and value-creating solutions in packaging, hygiene and recovery. Join 10,000 talents working in a network in almost 70 operating units located in North America.

WHO ARE WE Sonaca North America is driven by a passion for innovation and a commitment to excellence. As a leading provider of aerospace and defense solutions, we are dedicated to making air and space travel safe and sustainable. We have 13 locations across North America and our engineering expertise and operational excellence set us apart from the competition. Since the beginning in 1948, we have a proven track record of delivering high-quality products and services that are reliable, safe, and efficient. Our team of experts is dedicated to staying ahead of the curve in the aerospace and defense industry, utilizing the latest technologies and processes to ensure that we deliver the best possible solutions to our customers. POSITION SUMMARY We are currently seeking a Quality Inspector - NDT to perform inspection functions of assembled parts. Our Quality Inspectors inspect products and/or documents at various stages of production, to validate processes and provide documentation required to show compliance to the Sonaca North America Quality System, while under close supervision. Also, read and interpret customer instructions, blueprints, charts and other statistical information; prepare parts and documentation for outside criteria; and participate in work center and other problem-solving teams as requested. ESSENTIAL JOB RESPONSIBILITIES Inspectors assist production personnel in establishing and documenting inspection criteria, prepare parts and documentation to meet outside criteria, completes all required inspection documentation and communicates as needed with customers. Entering data into the Work Order Tracking System, including notes and recording data on the work order. Documenting Nonconforming Material per the Quality System Requirements. Assists in identifying parts deficiencies and helps to prevent further recurrences. Determining whether the product is acceptable or unacceptable according to work order and customer requirements. Responsibly handle “stop the job” authority at any stage of process. Perform sampling inspection. Perform Adhesion Testing requirements. Maintain good housekeeping in the inspection areas. Handle customer-supplied product with care. Properly use calibrated thickness masters, shims, certified master materials samples, etc. Verify the job, matching the actual parts with the work order, part number(s), printed and/or electronic pictures and part count. Maintain Sonaca North America's quality standards to meet and exceed customer expectations. Access all applicable Prime customer specification requirements on SharePoint site. Manages time effectively so that production, quality and delivery schedules are met. Interacts professionally with co-workers and vendors, understands internal customers, and strives to maintain good relations with others. Follow all safety requirements and enforce compliance. Work overtime, when required (including weekends), on short notice. Perform other duties as assigned by the Inspection Lead. Responds quickly to inquiries and follows up, as needed. Embraces change to ensure overall success of the company. EDUCATION AND EXPERIENCES High school diploma or high school equivalency preferred. Candidates that do not have a high school diploma or high school equivalency will be required to take a pre-employment assessment to be considered for the role. Must have ability to read and comprehend American English. Must have ability to read, interpret, and understand customer drawing, mylars and sketches as applicable to work being performed. Must develop a good working knowledge of all internal procedures and customer requirements. Must develop a good working knowledge of the processes performed in the chemical processing area. Must exhibit good communication skills when dealing with inspection personnel, on-floor operators and customer service representatives. Must be flexible, self-driven. Must become proficient in using the Work Order Tracking Program, and the Quality System on the SharePoint site. Must exhibit professionalism when dealing with subordinates and superiors. Must exhibit ability to troubleshoot and correct problems using problem-solving skills. Must have ability to follow written and verbal directions. Must have ability to apply basic math skills. Must exhibit interpersonal, verbal and written communication skills. Must exhibit attention-to-detail. Must have ability to handle stressful situations Must be honest and ethical in all actions. Motivational skills desired. Presentation skills desired. Organizational and planning skills desired. Analytical skills desired. Must possess a positive attitude. Must be dependable. Must have demonstrated team-building capabilities. Must have a demonstrated strong work ethic. Physical Requirements Ability to sit or stand for extended periods of time Noise levels ranging from quiet to extremely loud Required to wear Personal Protective Equipment (PPE) when working on the manufacturing floor including, but not limited to, eye, ear, and foot protection May occasionally lift and /or move up to 10-50 pounds WHY CHOOSE SONACA NORTH AMERICA? We take care of our people. 401(k) retirement savings plan with a percentage company-match contribution Competitive wages Paid holidays Paid time off Medical, dental, vision, life, and accidental insurance Short-term disability Long-term disability Employee assistance plan - for access to counseling, consulting and other community resources Wellness program Tuition assistance Subject to eligibility, terms, and conditions This is only a summary of the typical functions of the job, not an exhaustive or comprehensive list of all possible job responsibilities, tasks, and duties. The responsibilities, tasks, and duties may differ from those outlined in the job description and other duties, as assigned, may be required. This document does not create an employment contract. Employees of the Company are employed on an “at will” basis and may be terminated at any time. Sonaca North America is an equal employment opportunity employer. Consistent with applicable law, Sonaca North America provides access and opportunities to those with disabilities. This includes providing reasonable accommodation to individuals with disabilities and disabled veterans who seek to access the company's online application system. If an applicant is unable to fully access the online application system, Sonaca North America will provide a reasonable accommodation. Applicants with disabilities may contact us at ************ for assistance accessing the on-line application system. Callers should have a detailed description of the requested accommodation, their name and preferred method of contact ready for Sonaca North America‘s Human Resources Department. Sonaca North America will make every effort to respond within two (2) business days. This phone number is not for the general submission of application materials. Sonaca North America is an E-Verify Employer. Sonaca North America is an Equal Employment Opportunity/Disability/Veterans Employer NOTICE ON FRAUDULENT JOB OFFERS It has been brought to our attention that there have been instances of fraudulent job offers, purporting to be from Sonaca North America and/or its affiliates (“LMI Aerospace”). This type of fraud is normally carried out through online services such as false websites, or through fake e-mails or call from people claiming to be from the company. These persons offer fraudulent employment opportunities to applicants and often ask for sensitive personal and financial information. The fraudsters may also request recipients to provide personal information and/or to make payments as part of their fake recruiting process. Sonaca North America does not ask for any financial commitments from candidates as a pre-employment requirement and will always require candidates to formally apply for positions via the Careers Page or job postings. Sonaca North America has no responsibility for fraudulent offers and if you believe you have been a victim of a fraudulent job offer concerning Sonaca North America, please email ******************.

Job Description To perform all types of inspection which includes at least one (1) or more types of NDT (PT, MT, PMI, etc.) on raw or finished materials, parts, assemblies, and completed products to assure compliance with Ruhrpumpen and customer standards. Responsibilities and Duties 1. Receives, visually inspects, counts, and checks in all received items, process documents and records information on Ruhrpumpen forms. 2. Conducts and documents a variety of visual, dimensional, non-destructive, and monitoring inspections to verify conformance to defined requirements. 3. Use a variety of precision measuring and inspection tools to verify conformance of complex parts to engineered drawings, verifies information on operator inspection records to insure accuracy. 4. Performs visual inspections and makes dimensional checks including making required inspections and set-ups on complicated machined parts, machined parts assemblies and completed products. Performs first article inspection on the floor, and final inspections as required to assure that all items meet the required standard and conform to manufacturing specifications. 5. Documents non-conformances and dispositions acceptance or rejection where appropriate. 6. Conducts inspections at outside vendors, certifying to acceptability of machined parts and/or machine part assemblies. 7. Operates overhead crane and material moving equipment to move received items to designated areas. 8. Maintains work area in a clean orderly fashion. 9. Performs other duties as assigned. 10 Inspects and certifies that precision instruments meet acceptable standards. May perform some minor repair work on instruments. Also includes servicing of gauges and inspection tools and equipment; dismantling cleaning, setting and calibration as required. 11 Issues and maintains thread gauges, micrometers, dial bore gauges and other precision measuring instruments to insure they meet prescribed standards. 12. Follows appropriate handling and disposal of hazardous waste in compliance with EPA Regulations. Knowledge of applicable Material Safety Data Sheets (MSDS). 13 For the protection of self and others, performs all work in accordance with established safety practices and facility safety rules. 14. Produces quality on time work and complies with ISO 9001 requirements. Qualifications and Skills Completion of two to four years Trade or Technical School, or equivalent, requiring use of advanced shop mathematics together with the use of complicated drawings , specifications, charts, ,tables, handbook formulas, and a wide variety of precision measuring instruments. 3 to 5 years of experience Physical Requirements: Prolonged standing, walking, bending, kneeling, twisting. Ability to lift up to 50lbs, good hand/eye coordination (eye test required) and ability to work in hot/cold environment. TO APPLY: ******************************************** VEVRAA Federal Contractor/ EEO/AAP Powered by JazzHR ic LUKVRVRY

Job DescriptionDescription: Job Title: Quality Control Technician A & M - OUR COMPANY A & M Engineering and Environmental Services, Inc. (A & M) was founded in 1984 with our Headquarters located in Tulsa, Oklahoma. From our humble beginnings, we have developed into a diverse company providing turnkey construction, remediation services, engineering/design, compliance, and professional services to governmental agencies, private sector entities, and Native American tribes. A & M is comprised of a talented team of industry leaders dedicated to solving complex projects and challenges for our clients through providing great value through leading technology, innovation, and creative solutions. As a responsive, cross-disciplinary team of bright, curious, and innovative problem-solvers, we are dedicated to high quality delivery to our clients. A & M is committed to providing reliable services that are top quality, precise, and cost-effective. We strive to provide turn-key services that meet all our client's needs from permitting to implementation; design to build; and remediation to monitoring. Our key drivers (safety, reliability, capability, affordability, quality, compliance, and trust) are embedded in our products and services and practiced in our professional activities. A & M greatly values our employees and promotes a positive work/life balance with a work environment that offers opportunities for professional development and career advancement supporting our program and portfolio spanning across the United States. A & M is seeking a Quality Control Technician to join our team providing leadership and management supporting A & M's portfolio of environmental and civil projects. This position is remote, with travel to the job site. Responsibilities/Duties WHAT YOU'LL BE DOING The successful candidate will be responsible for: Compile new quality reports and data, then enter results. Gather field samples for quality tracking. Responsible for observing and reporting on quality control issues. Complete weekly reports accurately and on time. Perform inspections of delivered materials and installed systems. Read and comply with numerous requirements regarding work permits. Read and comply with MSDSs which accompany all chemicals which are present at the hazardous waste site Prepare, submit and track material and equipment submittals. Be able to track field changes and develop as-built drawings. Use of CADD software a plus. Maneuver uneven terrain Provide excellent customer service Execute tasks from detailed written and oral instructions Assist with the assembly of shoring systems for excavation Read and comply with safety plans, rules, maintenance instructions, training manuals, MSDSs, warning tags, traffic signs, and procedure manuals. The duties in this posting are representative categories to be used in deciding whether to apply for the position. These general categories do not constitute an exhaustive list of duties of the position for which you are applying. Requirements: REQUIRED SKILLS The ideal candidate will need the following for success in this role: High School Diploma or equivalent Reliable transportation to and from work. Possess and maintain a valid driver's license with clean driving record Excellent verbal and written communication skills Proficient computer knowledge, specifically Word and exceptional experience developing and working with Excel spreadsheets. Successfully pass all required training [Prefer] Experience with behavior-based safety programs (i.e. LPS) Current 40 hr. HAZWOPER Training. Current 10 hr. OSHA Card [Prefer] 2 years construction experience. Must have a strong work ethic, handle working independently with a desire to learn and improve. Must be able to manage time and complete assigned projects within deadlines Promotes teamwork within the project and externally by positive, cooperative attitude and willingness to take on additional duties as directed. Be able to read and understand construction drawings and specifications as well as implement project plans. Details MORE ABOUT A & M AND THE OPPORTUNITY At A & M, we strive through team collaboration, unified vision, and a positive work environment while striving for excellence for all our clients. A pre-hire drug test is required. Some positions may require U.S. citizenship. A & M is an Equal Employment/Affirmative Action employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state, or local law. For more information about, or to apply for this position please click our link below: **************************************

QC Technician (Electrical Test) QC Tech Department: Operations Reports to: Quality Manager Job Type: Full Time Inspect and electrically test control panels in a manufacturing environment. Responsibilities Inspect panels for fit and finish. Continuity checking of electrical circuits and troubleshooting of wiring issues Variable frequency drive programming Programmable logic controller flashing and setup Attention to detail and self-motivated Must be able to accurately complete test reports and other paperwork Function testing of relay logic and PLC input/output to test drive, motor starters, etc. Contribute to the company's continuous improvement processes Requirements Must be detail oriented. Must practice good/safe housekeeping. Excellent verbal and written communication skills Must comply with PPE requirements. Ability to read and understand electrical schematics is required. This includes knowledge of schematic symbols, panel components and general wiring practices. Understanding of AC and DC circuits is required. Previous control panel building/testing experience is preferred. Previous experience with 480V industrial panels is highly preferred Current UL MTR certification is highly preferred-Includes shift differential Employee must be proficient in both spoken and written English Ability to distinguish colors Computer skills to include Word, Excel, Outlook Ability to stand for extended periods of time, work may also be required in a seated position. This position is a safety-sensitive position. I understand and acknowledge that this job description serves as an agreed upon list of roles and responsibilities, but that it may not be fully encompassing of the day-to-day position. My signature indicates my understanding and agreement. Employee Signature: _________________________________________ Date: ____________________ As an equal opportunity employer, AID complies with all applicable federal and state laws regarding non-discrimination and affirmative action. AID is committed to a policy of equal opportunity for all individuals and does not discriminate based on race, religion, age, sex, color, national origin, marital status, sexual orientation, gender identity/expression, disability, or veteran status with regard to employment. Must be able to pass a 7 year background check. We also conduct pre-employment drug testing. Any job offer will be based on the results of the background check and drug test.

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Essential Job Functions: Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). Ensure all products conform to the customer specifications as outlined in SAP system. Perform analysis on raw materials, finished batches, treated water and/or any other programmed outlines by the department. Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials as acceptable or unacceptable. Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity. Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, can seam checks, and/or any other requirements required by the customer or the company. Stop any production which may be questionable in terms of Food Safety and immediately alert a member of the management team. Maintain accurate, legible records of all tests and retests performed. Complete all other required reports (work orders, action reports, etc.) in a timely manner. Perform analytical tests required to qualify ingredient batches for production. Perform production line checks at specified intervals. Ensure accurate test results by maintaining proper operation and calibration of laboratory equipment. Maintain laboratory cleanliness at all times. Report all out of specification results to designated leadership. Complete special projects and other reasonable duties as assigned by leadership. Required Skills: Working knowledge of Excel, Word, and SAP preferred. Exposure to using measurement tools and equipment (e.g., calipers, micrometers, CMM machines) preferred. Organized and detail oriented, adaptable to change. High level of precision and accuracy in inspection and testing processes. Familiarity with SQF, SAP, Six Sigma, GMP, and other relevant standards and regulations Understanding of Food Safety Requirements. Able to read and understand metric system. Food or beverage laboratory experience preferred. Competencies: Technical: Skilled in maintaining accurate and detailed records of inspections and tests Integrity: Commitment to maintaining high ethical standards in all quality assurance activities. Adaptability: Flexibility to adapt to changing production environments and requirements. Communication: Clear and concise communication with production staff and management Education and Experience: Highschool diploma or equivalent. 1 - 3 years of experience in Quality within a manufacturing environment preferred. In plants co-packaging alcoholic beverages, must be at least 21 years old. Working Conditions: Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed. Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold (laboratory is temperature controlled). The environment is structured and supervised. Travel Requirements: 0% travel anticipated. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand or Sit X Stoop, kneel, crouch, or crawl X Lifting up to 50 lbs. (minimum 5 lbs) X Carry weight, lift X Walking X Driving X Climb (stairs/ladders) or balance X Visual/Sensory: This position requires attention to detail, requiring attention with one or two senses at a time. Mental Stress: There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. A Career with Refresco Refresco Beverages US, Inc. offers competitive pay and comprehensive benefits, which include: Medical/Dental/Vision Insurance Health Savings Accounts and Flexible Spending Accounts Life and AD&D Insurance Pet Insurance Legal Benefits 401(k) Savings Plan with Company Match 12 Paid Holidays, Vacation, and Paid Time Off Well-being Benefits Discount and Total Reward Programs Join Refresco TODAY and enjoy a rewarding CAREER! Third-Party Employment Agency Disclosure Any employment agency, person, or entity that submits a résumé to this career site or a hiring manager does so with the understanding that the applicant's résumé will become the property of Refresco Beverages US, Inc. Refresco Beverages, US Inc. will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity. Employment agencies that have agreements with Refresco Beverages US, Inc., and have been engaged in a search shall submit a résumé to the designated Refresco recruiter or, upon authorization, submit a résumé to this career site to be eligible for placement fees. EEOC Statement Refresco Beverages US, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law.

Make a Difference in YOUR Career! Our vision is both simple and ambitious: to put our drinks on every table. We are the leading global independent beverage solutions provider. We serve a broad range of national and international retailers as well as Global, National and Emerging (GNE) brands. Our products are distributed worldwide from our production sites in Europe, North America, and Australia. Although our own branding may not appear on the labels of the beverages we produce, there is a good chance you are reading this while sipping one of our drinks. Our ambition is to continually improve and it's what keeps us at the top of our game. We are solutions-based. We are innovative. We seek out new challenges and conquer them. This is our company ethos, but it's our people's too: Refresco is at the cutting edge of a fast-moving industry because we have passionate people pushing the boundaries of what's best. Stop and think: how would YOU put our drinks on every table? Essential Job Functions: * Adhere to all health and safety policies/procedures, Good Manufacturing Practices (GMPs) and wear the required personal protective equipment (PPE) while in the warehouse or production areas (including but not limited to hairnets/beard nets, safety glasses, hearing protection, hard toe and slip/oil resistant shoes, appropriate safety gloves, and seatbelts while operating forklifts). * Responsible to adhere to food quality and food safety as per the standard(s) provided by corporate, customer, and/or governing bodies (ex. SQF). * Ensure all products conform to the customer specifications as outlined in SAP system. * Perform analysis on raw materials, finished batches, treated water and/or any other programmed outlines by the department. * Conduct chemical and physical analysis on raw and intermediate processing materials including packaging materials and determine status of materials as acceptable or unacceptable. * Evaluate finished products against current standards by performing audits to monitor all aspects of finished product and packaging integrity. * Check process control parameters to assure proper equipment application and operation is being maintained by performing secure seal, closure torque, can seam checks, and/or any other requirements required by the customer or the company. * Stop any production which may be questionable in terms of Food Safety and immediately alert a member of the management team. * Maintain accurate, legible records of all tests and retests performed. Complete all other required reports (work orders, action reports, etc.) in a timely manner. * Perform analytical tests required to qualify ingredient batches for production. * Perform production line checks at specified intervals. * Ensure accurate test results by maintaining proper operation and calibration of laboratory equipment. * Maintain laboratory cleanliness at all times. * Report all out of specification results to designated leadership. * Complete special projects and other reasonable duties as assigned by leadership. Required Skills: * Working knowledge of Excel, Word, and SAP preferred. * Exposure to using measurement tools and equipment (e.g., calipers, micrometers, CMM machines) preferred. * Organized and detail oriented, adaptable to change. * High level of precision and accuracy in inspection and testing processes. * Familiarity with SQF, SAP, Six Sigma, GMP, and other relevant standards and regulations * Understanding of Food Safety Requirements. * Able to read and understand metric system. * Food or beverage laboratory experience preferred. Competencies: * Technical: Skilled in maintaining accurate and detailed records of inspections and tests * Integrity: Commitment to maintaining high ethical standards in all quality assurance activities. * Adaptability: Flexibility to adapt to changing production environments and requirements. * Communication: Clear and concise communication with production staff and management Education and Experience: * Highschool diploma or equivalent. * 1 - 3 years of experience in Quality within a manufacturing environment preferred. * In plants co-packaging alcoholic beverages, must be at least 21 years old. Working Conditions: * Work Schedule: Weekdays, weekends, afternoon, evening, and overnight may be required. Overtime scheduled as needed. * Work Environment: Operating in a fast-paced production plant with numerous moving parts. Noise levels require hearing protection and temperatures can get very hot and/or relatively cold (laboratory is temperature controlled). The environment is structured and supervised. Travel Requirements: * 0% travel anticipated. Physical Requirements: R = Rarely (0-15%) O = Occasionally (16-45%) F = Frequently (46-100%) Physical Demand R O F Stand or Sit X Stoop, kneel, crouch, or crawl X Lifting up to 50 lbs. (minimum 5 lbs) X Carry weight, lift X Walking X Driving X Climb (stairs/ladders) or balance X * Visual/Sensory: This position requires attention to detail, requiring attention with one or two senses at a time. * Mental Stress: There is pronounced pressure from deadlines, production quotas, accuracy, or similar demands. Other Duties: * This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities, and activities may change, or new ones may be assigned at any time with or without notice. A Career with Refresco Refresco Beverages US, Inc. offers competitive pay and comprehensive benefits, which include: * Medical/Dental/Vision Insurance * Health Savings Accounts and Flexible Spending Accounts * Life and AD&D Insurance * Pet Insurance * Legal Benefits * 401(k) Savings Plan with Company Match * 12 Paid Holidays, Vacation, and Paid Time Off * Well-being Benefits * Discount and Total Reward Programs Join Refresco TODAY and enjoy a rewarding CAREER! Third-Party Employment Agency Disclosure * Any employment agency, person, or entity that submits a résumé to this career site or a hiring manager does so with the understanding that the applicant's résumé will become the property of Refresco Beverages US, Inc. Refresco Beverages, US Inc. will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person, or entity. Employment agencies that have agreements with Refresco Beverages US, Inc., and have been engaged in a search shall submit a résumé to the designated Refresco recruiter or, upon authorization, submit a résumé to this career site to be eligible for placement fees. EEOC Statement Refresco Beverages US, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, ancestry, religion, sex, national origin, sexual orientation, age, marital status, disability, gender identity, gender expression, Veteran status, or any other classification protected by federal, state, or local law.

COMPANY PROFILE: CaptiveAire is the nation's leading manufacturer of commercial kitchen ventilation systems, and now provides a complete solution of fans, heaters, duct work, and HVAC equipment. For over 40 years, we've led the industry with innovative technologies, unmatched service, competitive pricing, and rapid lead times. CaptiveAire maintains a network of over 90 sales offices in the U.S. and Canada and six strategically located manufacturing plants in North Carolina, Iowa, Oklahoma, California, Pennsylvania, and Florida. We are currently hiring Manufacturing & Production Technicians to perform general assembly in our Muskogee, OK manufacturing facility. Join us if you are interested in working in a fast-paced, financially-sound, climate-controlled manufacturing environment. Note: Satisfactory background check, and negative drug screen required SCHEDULE: 1st Shift 5am-1:30pm Monday-Friday Occasional mandatory overtime WHAT WE ARE LOOKING FOR: Hard-working individuals, wanting to excel in their profession Strong organizational skills Self-starting team player with a positive attitude and good communication Considers attendance & punctuality a priority RESPONSIBILITIES: Perform work according to safety & quality standards and procedures Work effectively as a team member contributing to a positive workplace Finished work is expected to be neat, orderly, and repeatable Ensuring work space is clean, safe and in working order JOB REQUIREMENTS: Ability to use various hand and power tools Ability to lift up to 50 lbs. independently Stand for long periods of time Basic mathematical skills Proficient in English Safety-sensitive position EDUCATION: High school diploma or equivalent required SALARY: Competitive Wages based on experience Monthly bonus based on performance and productivity BENEFITS: Medical, Dental, Vision $100,000 Life Insurance & Long-Term Disability with Medical election Flexible Spending Account (FSA) 401k w/ employer match Paid holidays Vacation and sick days based upon tenure APPLY NOW! Apply on our website: captiveaire.com OR pick up application at: 4031 Tull Ave, Muskogee, OK 74403 Applications submitted for this position are valid for 60 days. Consideration for employment after 60 days requires a new application to be submitted. This position is classified as a safety-sensitive position. Employees in this position are subject to drug and alcohol testing in accordance with CaptiveAire's Drug-Free Workplace policy. Captive-Aire Systems, Inc. is proud to be an equal opportunity workplace. We review applications for employment without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, ancestry, citizenship, age, uniformed services, genetic information, physical or mental disability, medical condition, marital status, or any other basis prohibited by law.

Crusoe's mission is to accelerate the abundance of energy and intelligence. We're crafting the engine that powers a world where people can create ambitiously with AI - without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that's setting the pace for responsible, transformative cloud infrastructure. About This Role: As our Quality Control Technician focused on switchboard testing, you will be instrumental in guaranteeing the quality and operational readiness of the electrical distribution systems that power our cutting-edge AI infrastructure. You will be responsible for executing comprehensive testing protocols for switchboard assemblies at various stages of production. Your understanding of electrical testing principles, safety regulations, and switchgear functionality will be essential in identifying and mitigating potential issues before deployment. This role requires a proactive and detail-oriented individual with strong analytical and problem-solving skills, coupled with a solid background in electrical testing and quality control within a manufacturing environment. You will collaborate closely with engineering and production teams to ensure adherence to specifications and maintain the highest levels of product quality. This is a full-time position where your expertise will directly impact the reliability and safety of our mission-critical infrastructure. What You'll Be Working On: * Switchboard Testing and Inspection: Execute comprehensive testing procedures for switchboard assemblies, including but not limited to visual inspections, electrical continuity tests, insulation resistance tests, functional tests, and operational checks. * Test Procedure Execution: Follow detailed test procedures and checklists to ensure consistent and thorough evaluation of switchgear performance against engineering specifications and industry standards. * Electrical Testing and Verification: Execute electrical testing procedures, including continuity testing, insulation resistance testing, functional testing, and other relevant electrical tests to ensure switchboard meets performance specifications and safety requirements, energized functionality testing. * Test Equipment Management: Ensure that all electrical testing equipment is properly calibrated, maintained, and operated according to safety guidelines. * Test Equipment Operation and Maintenance: Proficiently operate various electrical testing equipment (e.g., multimeters, megohmmeters, Hi-Pot testers) and ensure proper calibration and maintenance of this equipment. * Data Acquisition and Reporting: Accurately record and document test data, identifying trends, discrepancies, and potential failure points. Generate clear and concise test reports summarizing findings. * Non-Conformance Reporting: Document any test failures or non-conformances, and collaborate with engineering and production teams to support root cause analysis and the implementation of effective corrective and preventive actions. * Quality Standards and Compliance: Ensure all testing activities adhere to relevant industry standards, safety regulations (e.g., NEC, NFPA 70E, UL 891, IEEE, ANSI), and internal quality management system requirements. * Cross-Functional Collaboration: Work closely with electrical engineering, manufacturing, and quality assurance teams to resolve testing issues, provide feedback on design for testability, and contribute to continuous improvement initiatives. * Training and Guidance: Provide training and guidance to production personnel on basic quality checks and testing procedures related to switchgear assemblies. * Documentation Control: Maintain accurate and organized records of all test procedures, test results, and calibration records. * Other Duties: Undertake other quality-related tasks and projects as assigned to support overall operational efficiency and quality objectives. What You'll Bring to the Team: * Education: Minimum High School graduate or GED; Associate's or Bachelor's degree in Electrical Engineering Technology or a related field is preferred, and equivalent field experience will be considered. * Experience: Minimum of five years' experience in electrical testing and quality control roles, with a strong focus on testing medium and/or low voltage switchgear assemblies. * Electrical Testing Knowledge: Thorough understanding of electrical testing principles, methodologies, and safety practices. * Switchboard Familiarity: Comprehensive knowledge of switchgear components, functionality, and relevant industry standards (e.g., NEC, NFPA 70E, UL 891, IEEE, ANSI). * Technical Proficiency: Demonstrated ability to interpret and understand electrical schematics, wiring diagrams, and technical specifications. * Test Equipment Expertise: Hands-on experience operating and maintaining various electrical testing equipment. * Computer Skills: Proficient in basic computer applications, including Google Suite (mail, drive, docs, sheets) and Microsoft Office (Word and Excel). * Physical Requirements: Ability to perform physical tasks associated with testing and inspection, including standing, walking, bending, and lifting components as needed. Requires good manual dexterity and visual acuity for detailed inspection and operation of test equipment. * Safety & Compliance: Willingness to strictly adhere to all safety regulations and participate in required safety training programs. This position is located in a safety-sensitive facility and may require participation in drug and alcohol programs. * Company Values Alignment: Your personal values resonate with Crusoe's core principles. * Soft Skills: Exceptional attention to detail and a strong commitment to electrical safety and product reliability. Excellent analytical and problem-solving skills for diagnosing and resolving electrical issues. Strong communication and interpersonal skills to effectively collaborate with cross-functional teams. Bonus Points: * Certifications related to electrical testing or quality control (e.g., NETA certification). * Experience with automated testing systems. * Knowledge of data acquisition and analysis software. * Experience in a manufacturing environment with high-reliability electrical equipment. * Familiarity with root cause analysis and corrective action processes for electrical failures. Benefits: * Hybrid work schedule * Industry competitive pay * Restricted Stock Units in a fast growing, well-funded technology company * Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents * Employer contributions to HSA accounts * Paid Parental Leave * Paid life insurance, short-term and long-term disability * Teladoc * 401(k) with a 100% match up to 4% of salary * Generous paid time off and holiday schedule * Cell phone reimbursement * Tuition reimbursement * Subscription to the Calm app * MetLife Legal * Company paid commuter benefit; $300/month Compensation Range Compensation will be paid in the range of up to $23 -$30/hr + Bonus. Restricted Stock Units are included in all offers. Compensation to be determined by the applicants knowledge, education, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

We are currently looking to fill a First Article Inspection position with a Tulsa steel manufacturing company. Shift: Evenings 3:30p-3:30a or Days 6a-4:30p, some OT may be required Starting Pay: $16 - $19 per hour; depending on experience The Ideal candidate will have extensive knowledge in developing and monitoring quality procedures within the metal fabrication, manufacturing, and welding industries. Essential Job Responsibilities: Inspects and measures parts using precision measuring equipment to determine conformance to material specifications. Perform quality inspections on processed plate products in various stages of completion from drafting/programming through final product. Maintain quality records and documents Calibrate shop measuring devices. Compile and analyze data such as customer feedback, nonconformance reports, scrap, rework. Studies and interprets sketches, drawings, manuals, specifications or sample parts to determine dimensions and tolerances of parts to determine conformance requirements.

Job Title: Quality Control Technician A & M - OUR COMPANY A & M Engineering and Environmental Services, Inc. (A & M) was founded in 1984 with our Headquarters located in Tulsa, Oklahoma. From our humble beginnings, we have developed into a diverse company providing turnkey construction, remediation services, engineering/design, compliance, and professional services to governmental agencies, private sector entities, and Native American tribes. A & M is comprised of a talented team of industry leaders dedicated to solving complex projects and challenges for our clients through providing great value through leading technology, innovation, and creative solutions. As a responsive, cross-disciplinary team of bright, curious, and innovative problem-solvers, we are dedicated to high quality delivery to our clients. A & M is committed to providing reliable services that are top quality, precise, and cost-effective. We strive to provide turn-key services that meet all our client's needs from permitting to implementation; design to build; and remediation to monitoring. Our key drivers (safety, reliability, capability, affordability, quality, compliance, and trust) are embedded in our products and services and practiced in our professional activities. A & M greatly values our employees and promotes a positive work/life balance with a work environment that offers opportunities for professional development and career advancement supporting our program and portfolio spanning across the United States. A & M is seeking a Quality Control Technician to join our team providing leadership and management supporting A & M's portfolio of environmental and civil projects. This position is remote, with travel to the job site. Responsibilities/Duties WHAT YOU'LL BE DOING The successful candidate will be responsible for: Compile new quality reports and data, then enter results. Gather field samples for quality tracking. Responsible for observing and reporting on quality control issues. Complete weekly reports accurately and on time. Perform inspections of delivered materials and installed systems. Read and comply with numerous requirements regarding work permits. Read and comply with MSDSs which accompany all chemicals which are present at the hazardous waste site Prepare, submit and track material and equipment submittals. Be able to track field changes and develop as-built drawings. Use of CADD software a plus. Maneuver uneven terrain Provide excellent customer service Execute tasks from detailed written and oral instructions Assist with the assembly of shoring systems for excavation Read and comply with safety plans, rules, maintenance instructions, training manuals, MSDSs, warning tags, traffic signs, and procedure manuals. The duties in this posting are representative categories to be used in deciding whether to apply for the position. These general categories do not constitute an exhaustive list of duties of the position for which you are applying. Requirements REQUIRED SKILLS The ideal candidate will need the following for success in this role: High School Diploma or equivalent Reliable transportation to and from work. Possess and maintain a valid driver's license with clean driving record Excellent verbal and written communication skills Proficient computer knowledge, specifically Word and exceptional experience developing and working with Excel spreadsheets. Successfully pass all required training [Prefer] Experience with behavior-based safety programs (i.e. LPS) Current 40 hr. HAZWOPER Training. Current 10 hr. OSHA Card [Prefer] 2 years construction experience. Must have a strong work ethic, handle working independently with a desire to learn and improve. Must be able to manage time and complete assigned projects within deadlines Promotes teamwork within the project and externally by positive, cooperative attitude and willingness to take on additional duties as directed. Be able to read and understand construction drawings and specifications as well as implement project plans. Details MORE ABOUT A & M AND THE OPPORTUNITY At A & M, we strive through team collaboration, unified vision, and a positive work environment while striving for excellence for all our clients. A pre-hire drug test is required. Some positions may require U.S. citizenship. A & M is an Equal Employment/Affirmative Action employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state, or local law. For more information about, or to apply for this position please click our link below: **************************************