MIG Welder jobs at Randstad North America, Inc. - 222 jobs

PRIMARY RESPONSIBILITIES * Work from the directions of the supervisor to move Wind Tower sections, set up and operate the MIG welders, Follow and complete daily build schedule. * Weld, grind, and repair each Wind Tower section prior to presenting it to the Quality Inspectors. This person will also repair all weld defects as directed by the Quality Inspectors * Perform most of the work individually. Essential tools and welding equipment will be provided, however, accountability and maintenance will be the employee's responsibility * Work timely and expeditiously to deliver an on-time product without manufacturing errors * Perform other duties as directed by leaders and management * Clamp, grind, tack-weld, or bolt components into position before welding * Actively participate in department safety, demonstrate excellent safety practices and behaviors which conform to all safety policies and procedures. Follow all OSHA safety regulations and wear prescribed PPE as required. * Embrace culture of Lean Manufacturing and the implementation of change * Perform other work-related tasks as assigned. FACILITY/GROUP SPECIFIC RESPONSIBILITIES * To carry out all duties in accordance with the Quality Assurance procedures and departmental works instructions. * To contribute to general improvements in the quality of key activities within the department. * Comply with all Keystone Tower Systems Company and HSE procedures and policies. EDUCATION & EXPERIENCE QUALIFICATIONS * High school diploma or equivalent * A minimum of 1 year of experience with MIG welding in a manufacturing environment JOB REQUIREMENTS * Ability to identify and communicate maintenance or product problems to departmental supervision * Must be a person of passion and integrity who has the drive to excel and deliver exceptional results * Incumbent to pass an AWS welder qualification test and be able to use the MIG welding equipment without difficulty * Knowledge of welding properties of variety of metals and alloys, welding procedures, and practices essential to ensure the quality of the product * Ability to calculate formula using basic mathematics, standard U.S. and Metric Measurements * Able read and interpret work instructions, blueprints, manufacturing drawings or similar information * Ability to lift 75+ pounds

PRIMARY RESPONSIBILITIES • Work from the directions of the supervisor to move Wind Tower sections, set up and operate the MIG welders, Follow and complete daily build schedule. • Weld, grind, and repair each Wind Tower section prior to presenting it to the Quality Inspectors. This person will also repair all weld defects as directed by the Quality Inspectors • Perform most of the work individually. Essential tools and welding equipment will be provided, however, accountability and maintenance will be the employee's responsibility • Work timely and expeditiously to deliver an on-time product without manufacturing errors • Perform other duties as directed by leaders and management • Clamp, grind, tack-weld, or bolt components into position before welding • Actively participate in department safety, demonstrate excellent safety practices and behaviors which conform to all safety policies and procedures. Follow all OSHA safety regulations and wear prescribed PPE as required. • Embrace culture of Lean Manufacturing and the implementation of change • Perform other work-related tasks as assigned. FACILITY/GROUP SPECIFIC RESPONSIBILITIES • To carry out all duties in accordance with the Quality Assurance procedures and departmental works instructions. • To contribute to general improvements in the quality of key activities within the department. • Comply with all Keystone Tower Systems Company and HSE procedures and policies. EDUCATION & EXPERIENCE QUALIFICATIONS • High school diploma or equivalent • A minimum of 1 year of experience with MIG welding in a manufacturing environment JOB REQUIREMENTS • Ability to identify and communicate maintenance or product problems to departmental supervision • Must be a person of passion and integrity who has the drive to excel and deliver exceptional results • Incumbent to pass an AWS welder qualification test and be able to use the MIG welding equipment without difficulty • Knowledge of welding properties of variety of metals and alloys, welding procedures, and practices essential to ensure the quality of the product • Ability to calculate formula using basic mathematics, standard U.S. and Metric Measurements • Able read and interpret work instructions, blueprints, manufacturing drawings or similar information • Ability to lift 75+ pounds Competitive Benefits: (visit usbenefits.nov.com for more information about our benefits offerings) • 401(k) Retirement Plan - NOV matches every dollar up to 5% of base pay and overtime for every dollar you invest. • Competitive medical plans that are effective your date of hire. Coverage options for just yourself as an eligible employee start at as little as $40 per pay period (bi-weekly), and plans that cover your entire family (yourself, eligible spouse, and eligible children) start at $150.50 per pay period (bi-weekly). • Starting in 2026, FREE MDLIVE virtual visits (when enrolled in an NOV medical plan). • FREE preventative medical and dental care for the entire family (when enrolled in an NOV medical/dental plan and seeing an in-network physician). • FREE Basic Life and AD&D insurance at 2 times your annual salary (for full-time employees). • All regular full-time employees start with 3 weeks of paid vacation per year (prorated based on start date). Pre-NOV relevant experience (years of service) may be considered for vacation accruals. • All regular full-time employees receive up to 11 paid holidays per year.

PRIMARY RESPONSIBILITIES • Work from the directions of the supervisor to move Wind Tower sections, set up and operate the MIG welders, Follow and complete daily build schedule. • Weld, grind, and repair each Wind Tower section prior to presenting it to the Quality Inspectors. This person will also repair all weld defects as directed by the Quality Inspectors • Perform most of the work individually. Essential tools and welding equipment will be provided, however, accountability and maintenance will be the employee's responsibility • Work timely and expeditiously to deliver an on-time product without manufacturing errors • Perform other duties as directed by leaders and management • Clamp, grind, tack-weld, or bolt components into position before welding • Actively participate in department safety, demonstrate excellent safety practices and behaviors which conform to all safety policies and procedures. Follow all OSHA safety regulations and wear prescribed PPE as required. • Embrace culture of Lean Manufacturing and the implementation of change • Perform other work-related tasks as assigned. FACILITY/GROUP SPECIFIC RESPONSIBILITIES • To carry out all duties in accordance with the Quality Assurance procedures and departmental works instructions. • To contribute to general improvements in the quality of key activities within the department. • Comply with all Keystone Tower Systems Company and HSE procedures and policies. EDUCATION & EXPERIENCE QUALIFICATIONS • High school diploma or equivalent • A minimum of 1 year of experience with MIG welding in a manufacturing environment JOB REQUIREMENTS • Ability to identify and communicate maintenance or product problems to departmental supervision • Must be a person of passion and integrity who has the drive to excel and deliver exceptional results • Incumbent to pass an AWS welder qualification test and be able to use the MIG welding equipment without difficulty • Knowledge of welding properties of variety of metals and alloys, welding procedures, and practices essential to ensure the quality of the product • Ability to calculate formula using basic mathematics, standard U.S. and Metric Measurements • Able read and interpret work instructions, blueprints, manufacturing drawings or similar information • Ability to lift 75+ pounds

* Operator will be required to set-up, operate, and to adjust machines and equipment in order to produce a good quality product. Examples of machines and equipment are, but not limited to, electric welder, coil feeder, jib crane, welding fixtures, and other departmental equipment. * Will be required to set-up, operate, program, and trouble shoot (material handling, drilling, and welding) of other pieces of equipment in the welding process to achieve acceptable levels in productivity, and quality. * Operator will need to know how to operate overhead crane, forklift, hand held grinder, and other department equipment * Responsible for welding steel and aluminum components to assemble structural forms A Day In The Life * Knowledge and technique of MIG welding * Must have the ability to read a tape measure * Ability to regularly move, twist, bend, and crouch while working * Dependable with a good attendance record * Mechanical aptitude * Ability to read blue prints and weld assemblies to comply with the engineering standards * Experience with a handheld plasma cutter a plus * Will be required to perform various other duties in the department, such as but not limited to, operate other welding equipment, use of various hand tools, and pieces of equipment designed for material handling. Follow all safety precautions, process procedures, and all supervisors instructions. What will help you thrive in this role? * Layout, align, fit and weld fabricated steel and aluminum components * Read and understand blueprints * Strong attention to detail in regards to alignment, dimensions, and general inspection * Perform work involving close tolerances that require constant attention while making adjustments to perform properly * May be required to perform various other duties in the department, such as but not limited to, operate other welding equipment, use of various hand tools, and pieces of equipment designed for material handling. Follow all safety precautions, process procedures, and all supervisors instructions. * Performing job safely while utilizing all personal protective equipment. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class.

Job Description Experienced Traveling TIG Welders Needed - Journeyman Level (Alabama Projects) Pay Range: $24 - $34 per hour (based on experience and certifications) Per Diem: Offered (amount TBD) Employment Type: Full-Time, Travel-Based Work United Trades of America is actively hiring Journeyman-level Traveling TIG Welders for a variety of industrial and commercial projects across Alabama. We are seeking highly skilled welders with strong TIG experience who can pass both written/verbal evaluations and hands-on skill assessments before being placed on projects. Candidates must be proficient in welding both carbon steel and stainless steel. Our upcoming jobs include new construction, shutdowns, and repairs, so welders must be versatile and ready to adapt to different site needs. If you take pride in your craftsmanship and are ready to work for a company that values safety, quality, and long-term opportunities, we want to hear from you! Minimum Requirements: Journeyman-level welding experience (5+ years preferred) Strong TIG welding proficiency (MIG, Stick, and Flux-Core are a plus) Must have experience welding carbon steel and stainless steel Welding certifications highly preferred (or willingness to certify) OSHA 10 (minimum) or OSHA 30 certification required Must pass a verbal/written knowledge test and a hands-on welding test Must submit to and pass a pre-employment drug screen and background check Must provide own PPE and welding tools Ability to travel and work in various environments across Alabama Key Responsibilities: Perform TIG welding on piping, structural components, and specialty materials Work on a mix of new construction, shutdown projects, and repairs Read and interpret blueprints, schematics, and welding specifications Maintain high standards of welding quality, safety, and efficiency Work independently and alongside other trades to meet project deadlines Follow all site-specific safety protocols and OSHA regulations Why Work for United Trades of America? Competitive hourly wages based on your experience Per diem offered to assist with travel expenses Long-term project assignments available A strong commitment to tradespeople, safety, and career development Ready to join a company that supports skilled trades professionals? Apply now at *************************** or email your resume to *****************************.

Experienced Traveling TIG Welders Needed - Journeyman Level (Alabama Projects) Pay Range: $24 - $34 per hour (based on experience and certifications) Per Diem: Offered (amount TBD) Employment Type: Full-Time, Travel-Based Work United Trades of America is actively hiring Journeyman-level Traveling TIG Welders for a variety of industrial and commercial projects across Alabama. We are seeking highly skilled welders with strong TIG experience who can pass both written/verbal evaluations and hands-on skill assessments before being placed on projects. Candidates must be proficient in welding both carbon steel and stainless steel. Our upcoming jobs include new construction, shutdowns, and repairs, so welders must be versatile and ready to adapt to different site needs. If you take pride in your craftsmanship and are ready to work for a company that values safety, quality, and long-term opportunities, we want to hear from you! Minimum Requirements: Journeyman-level welding experience (5+ years preferred) Strong TIG welding proficiency (MIG, Stick, and Flux-Core are a plus) Must have experience welding carbon steel and stainless steel Welding certifications highly preferred (or willingness to certify) OSHA 10 (minimum) or OSHA 30 certification required Must pass a verbal/written knowledge test and a hands-on welding test Must submit to and pass a pre-employment drug screen and background check Must provide own PPE and welding tools Ability to travel and work in various environments across Alabama Key Responsibilities: Perform TIG welding on piping, structural components, and specialty materials Work on a mix of new construction, shutdown projects, and repairs Read and interpret blueprints, schematics, and welding specifications Maintain high standards of welding quality, safety, and efficiency Work independently and alongside other trades to meet project deadlines Follow all site-specific safety protocols and OSHA regulations Why Work for United Trades of America? Competitive hourly wages based on your experience Per diem offered to assist with travel expenses Long-term project assignments available A strong commitment to tradespeople, safety, and career development Ready to join a company that supports skilled trades professionals? Apply now at *************************** or email your resume to *****************************.

Welding Procedure: MIG Pulse Welding Test: 2G and 3G test PRINCIPAL DUTIES AND RESPONSIBILITIES: Set-up/run RT & UT Quality Code Welds Set-up/run UT Quality Nozzle/Branch Welds Set-up/run Carbon Arc Gouging Able to make any UT or RT Weld Repair Clean and stamp all welds Set-up/run all non-code vessel welds Layout and Fit vessel components Set-up and run all oxy-fuel cutting/burning Ability to read drawings, WPS's/ PQR's Ability to make correct decisions Speed of accomplishing tasks Proper, professional housecleaning Ability to work safely Average Percent of weld repairs Reliable and Punctual Attendance Positive and Cooperative Attitude Benefits Medical, Dental, Vision Plans Free Telemedicine Free Life insurance Vacation time Federal Holiday Pay

Welding Procedure: MIG Pulse Welding Test: 2G and 3G test PRINCIPAL DUTIES AND RESPONSIBILITIES: Set-up/run RT & UT Quality Code Welds Set-up/run UT Quality Nozzle/Branch Welds Set-up/run Carbon Arc Gouging Able to make any UT or RT Weld Repair Clean and stamp all welds Set-up/run all non-code vessel welds Layout and Fit vessel components Set-up and run all oxy-fuel cutting/burning Ability to read drawings, WPS's/ PQR's Ability to make correct decisions Speed of accomplishing tasks Proper, professional housecleaning Ability to work safely Average Percent of weld repairs Reliable and Punctual Attendance Positive and Cooperative Attitude Benefits Medical, Dental, Vision Plans Free Telemedicine Free Life insurance Vacation time Federal Holiday Pay

Job DescriptionDescription: Build your career with a company that values skilled trades, safety, and quality workmanship. Hess Services, Inc. is seeking a Welder to join our production team and fabricate high-quality industrial and oilfield equipment. This role is critical to ensuring weld integrity, structural strength, and product safety. If you take pride in your welds, follow procedures, and want a stable career with opportunities to advance, this is the role for you. Why You'll Want to Work Here We believe great work starts with taking care of our people. Hess Services offers a strong total rewards package, including: Company-paid health and dental insurance 401(k) with company match Paid Time Off (PTO) Employee Assistance Program (EAP) Stable, full-time employment Room for growth and advancement within a growing organization Job Purpose: The Welder performs duties related to steel production. Essential Functions include the following. Other duties may be assigned. Sets and modifies welding machine settings per materials and parameters, makes welds according to specification on prints and inspects finished product. Troubleshoots and fixes welds as needed or required by QC Inspector. Performs weld on steel products to the applicable code (ASME & API Codes). Follows prints accurately and operates grinders and other hand tools. Operates overhead cranes and other lifting devices. Accurately maintains required paperwork. Maintains safe and clean working environment by complying with procedures, rules and regulations. Secures tools, materials and equipment at end of day. Follows protocol and procedures documented in the employee handbook. Regular attendance and timeliness. Additional duties as assigned. Requirements: Qualifications and Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or equivalent preferred. Trade school preferred, plus a minimum of 2 years GMAW welding experience preferred, SMAW experience helpful; or 3+ years experience in relative field. Ability to pass GMAW 3G DH internal weld certification test under WPS (Welding Procedure Specification). Excellent written and verbal communication skills, with the ability to clearly communicate detailed information to customers, coworkers and management. Ability to read and interpret documents such as procedure manuals and job instructions with basic problem solving skills. Must be able to measure accurately. Able to read welding symbols preferred. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to calculate figures and amounts such as proportions. Apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to manage time effectively and prioritize tasks to meet deadlines. Strong attention to detail and organizational skills. Experience using power tools and hand tools. Ability to maintain confidentiality. Physical Demands and Work Environment: The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee is frequently required to stand, bend, kneel, climb stairs and walk; use hands to finger, handle, or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds for men or 30 pounds for women and is subject to confined spaces (crawling inside pressure vessels). Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. The work environment is usually an indoor setting with frequent exposure to outside elements. The noise level in the work environment is frequently high. Must abide by PPE requirements. Applicants must be 18 years or older. We have an amazing benefits package! Benefits include Competitive Wages(DOE), Paid Health/Dental Coverage, Vision Coverage, Paid Life Insurance, Retirement Plan with an Employer Match, a wide range of supplemental benefits you can pick and choose from to customize your coverage, Uniforms (We even clean them for you.) and Paid Time Off. Pre-Employment Drug Testing is required. Hess Services, Inc. is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants for employment and do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.

Full-time Description Build your career with a company that values skilled trades, safety, and quality workmanship. Hess Services, Inc. is seeking a Welder to join our production team and fabricate high-quality industrial and oilfield equipment. This role is critical to ensuring weld integrity, structural strength, and product safety. If you take pride in your welds, follow procedures, and want a stable career with opportunities to advance, this is the role for you. Why You'll Want to Work Here We believe great work starts with taking care of our people. Hess Services offers a strong total rewards package, including: Company-paid health and dental insurance 401(k) with company match Paid Time Off (PTO) Employee Assistance Program (EAP) Stable, full-time employment Room for growth and advancement within a growing organization Job Purpose: The Welder performs duties related to steel production. Essential Functions include the following. Other duties may be assigned. Sets and modifies welding machine settings per materials and parameters, makes welds according to specification on prints and inspects finished product. Troubleshoots and fixes welds as needed or required by QC Inspector. Performs weld on steel products to the applicable code (ASME & API Codes). Follows prints accurately and operates grinders and other hand tools. Operates overhead cranes and other lifting devices. Accurately maintains required paperwork. Maintains safe and clean working environment by complying with procedures, rules and regulations. Secures tools, materials and equipment at end of day. Follows protocol and procedures documented in the employee handbook. Regular attendance and timeliness. Additional duties as assigned. Requirements Qualifications and Requirements: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. High school diploma or equivalent preferred. Trade school preferred, plus a minimum of 2 years GMAW welding experience preferred, SMAW experience helpful; or 3+ years experience in relative field. Ability to pass GMAW 3G DH internal weld certification test under WPS (Welding Procedure Specification). Excellent written and verbal communication skills, with the ability to clearly communicate detailed information to customers, coworkers and management. Ability to read and interpret documents such as procedure manuals and job instructions with basic problem solving skills. Must be able to measure accurately. Able to read welding symbols preferred. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to calculate figures and amounts such as proportions. Apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to manage time effectively and prioritize tasks to meet deadlines. Strong attention to detail and organizational skills. Experience using power tools and hand tools. Ability to maintain confidentiality. Physical Demands and Work Environment: The physical requirements described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to talk and hear. The employee is frequently required to stand, bend, kneel, climb stairs and walk; use hands to finger, handle, or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds for men or 30 pounds for women and is subject to confined spaces (crawling inside pressure vessels). Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. The work environment is usually an indoor setting with frequent exposure to outside elements. The noise level in the work environment is frequently high. Must abide by PPE requirements. Applicants must be 18 years or older. We have an amazing benefits package! Benefits include Competitive Wages(DOE), Paid Health/Dental Coverage, Vision Coverage, Paid Life Insurance, Retirement Plan with an Employer Match, a wide range of supplemental benefits you can pick and choose from to customize your coverage, Uniforms (We even clean them for you.) and Paid Time Off. Pre-Employment Drug Testing is required. Hess Services, Inc. is an Equal Opportunity Employer. We are committed to providing equal employment opportunities to all employees and applicants for employment and do not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, veteran status, or any other status protected by applicable federal, state, or local law.

KEY JOB RESPONSIBILITIES: * Proficient in assigned welding techniques * Interpretation of mechanical drawings, including the ability to read weld symbols * Knowledge of wire and filler materials applications for various steel alloys. * Working knowledge of fixturing and weld set up parameters (amps, volts, etc.) * Conventional and precision measuring instruments * Process inspection, certification, and documentation * Welding equipment maintenance and inspection * Finish grinding applications using manual and power tools * Safety and Housekeeping * Other duties as assigned by the area supervisor JOB SKILLS: * Ability to read blueprints * Proficient with the welding process * Ability to fill out inspection forms EDUCATION & TRAINING: * High School diploma MINIMUM REQUIREMENTS: * Successful completion of internal welding test * Relevant work experience * Five years of experience with various forms of welding PHYSICAL REQUIREMENTS/WORK ENVIRONMENT: * Work performed in a shop environment; * Exposed to any number of elements but with none present to the extent of being disagreeable; * Requires normal vision and absence of color blindness * Physical effort equal to frequent moving of up to 50lbs materials; * Regularly required to sit or stand, bend and reach; * The use of Safety Glasses is required; * The use of earplugs is recommended; * Ability to stand up to 10 hours a day (with a lunch in between) and up to 6 days a week; * Ability to work in a non-air-conditioned environment. * Steel-toe boots required in Manufacturing Facility * May work at different workstations as production needs require, or shifts from one station to another, during the assembly process

Traveling TIG Welders - Journeyman Level - (Alabama) Pay Range: $24-$34/hour + Per Diem (TBD) United Trades of America is hiring Journeyman-level TIG Welders for projects across Alabama. Positions include new construction, shutdowns, and repairs. Candidates must have: Strong TIG welding skills Experience working with carbon and stainless steel OSHA 10 (minimum) or OSHA 30 certification Ability to pass verbal/written and hands-on tests Willingness to complete a pre-employment drug screen and background check Certification preferred. Apply now: *************************** Email your resume: *****************************

Full-time Description Join our expanding team! Tri Star Industrial is a leading distributor of pipe, valves, fittings, tanks, and industrial supplies, proudly serving a wide range of industries. With deep local roots and national reach through the Venturi Supply platform, our mission is to deliver the critical materials, custom solutions, and reliable service our customers depend on. At the heart of everything we do is our people. From the shop floor and counter to the job site and field, our team's expertise, commitment, and problem-solving mindset set us apart. Their dedication fuels our service, drives our accuracy, and ensures every order is handled with care and urgency. Backed by strategically located branches, a vast inventory, in-house fabrication capabilities, and decades of real-world experience, our teams connect infrastructure and industry to the essential resources they need to operate safely, efficiently, and successfully. We're more than a distributor-we're a trusted partner built on strong relationships, operational know-how, and a relentless focus on customer success. Role Overview The role of Welder includes construction of various fabricated parts and assembly from engineered prints by cutting, fitting, and welding. Responsibilities Operates welding equipment to fabricate components and assemblies including structural frames, piping, tanks, and ASME pressure vessels. Read blueprints and drawings to build designed fabrications. Determine the appropriate welding equipment or method based on welding procedures. Lay out and fit up fabricated components with tight tolerances indicated in drawings/prints using appropriate tools. Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal, or overhead) which may be subjected to non-destructive testing (NDE including but not limited to Xray, PT, MT, UT). Visually inspect welds and material and repair flaws by cutting, grinding, or air arc. Maintain equipment in condition that does not compromise safety. Keep a clean and organized work area. Performs additional duties as assigned or required. Requirements High School Diploma or GED Required. Certified in GTAW ASME IX required. 1 or more years of experience in TIG. 1 or more years of experience using tools relevant to welding and fabrication (saws, squares, grinders, torches, etc.) Ability to read and interpret technical documents and drawings. This includes welding symbols and fabrication instructions on blueprints. Able to read a tape measure and utilize math skills required for fabrication. Ability to effectively communicate [written and verbal]. Thrives in a collaborative team environment. Detailed oriented work style comfortable with multiple priorities being juggled while maintaining a consistent work approach. Physical requirements: Lift/push/pull 50 lbs., bend twist, stand for extended periods of time. Climb and reach for items, use an overhead crane, forklift, and endure frequent exposure to outside weather conditions. Ability to pass a background check, MVR check, and drug test. Benefits We're dedicated to our employees' and their families' health and well-being. Benefits begin on the first of the month following 30 days of employment. Exceptional Health Coverage Two medical plans, including HSA-qualified, with virtual care. Dental and vision coverage, including kids' orthodontia. HRA reimbursement eligibility. Employer-paid life and long-term disability insurance. Smart Financial Benefits 401(k) plan: Pre-tax and Roth options plus a generous employer matching contribution. Time Off & Work-Life Balance Enjoy 10 paid holidays and accrue PTO from your first day. Flexible workplace culture with career growth opportunities. Wellness & Support Access a robust Employee Assistance Program (EAP) with 24/7 support for you and your family. Resources to support mental, emotional, and financial well-being. Culture that Works for You Join a team that values integrity and innovation. Grow as a leader in industrial distribution with cutting-edge automation and supply chain solutions. Be part of a company that prioritizes people over profits. Venturi Supply and its affiliated companies are dedicated to fostering a diverse and inclusive workplace. We are an equal opportunity employer and do not discriminate against individuals based on race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or any other legally protected status. Salary Description $21.00 to $25.00 per hour plus bonus

Job DescriptionDescription: Join our expanding team! Tri Star Industrial is a leading distributor of pipe, valves, fittings, tanks, and industrial supplies, proudly serving a wide range of industries. With deep local roots and national reach through the Venturi Supply platform, our mission is to deliver the critical materials, custom solutions, and reliable service our customers depend on. At the heart of everything we do is our people. From the shop floor and counter to the job site and field, our team's expertise, commitment, and problem-solving mindset set us apart. Their dedication fuels our service, drives our accuracy, and ensures every order is handled with care and urgency. Backed by strategically located branches, a vast inventory, in-house fabrication capabilities, and decades of real-world experience, our teams connect infrastructure and industry to the essential resources they need to operate safely, efficiently, and successfully. We're more than a distributor-we're a trusted partner built on strong relationships, operational know-how, and a relentless focus on customer success. Role Overview The role of Welder includes construction of various fabricated parts and assembly from engineered prints by cutting, fitting, and welding. Responsibilities Operates welding equipment to fabricate components and assemblies including structural frames, piping, tanks, and ASME pressure vessels. Read blueprints and drawings to build designed fabrications. Determine the appropriate welding equipment or method based on welding procedures. Lay out and fit up fabricated components with tight tolerances indicated in drawings/prints using appropriate tools. Weld components using manual or semi-automatic welding equipment in various positions (vertical, horizontal, or overhead) which may be subjected to non-destructive testing (NDE including but not limited to Xray, PT, MT, UT). Visually inspect welds and material and repair flaws by cutting, grinding, or air arc. Maintain equipment in condition that does not compromise safety. Keep a clean and organized work area. Performs additional duties as assigned or required. Requirements: High School Diploma or GED Required. Certified in GTAW ASME IX required. 1 or more years of experience in TIG. 1 or more years of experience using tools relevant to welding and fabrication (saws, squares, grinders, torches, etc.) Ability to read and interpret technical documents and drawings. This includes welding symbols and fabrication instructions on blueprints. Able to read a tape measure and utilize math skills required for fabrication. Ability to effectively communicate [written and verbal]. Thrives in a collaborative team environment. Detailed oriented work style comfortable with multiple priorities being juggled while maintaining a consistent work approach. Physical requirements: Lift/push/pull 50 lbs., bend twist, stand for extended periods of time. Climb and reach for items, use an overhead crane, forklift, and endure frequent exposure to outside weather conditions. Ability to pass a background check, MVR check, and drug test. Benefits We're dedicated to our employees' and their families' health and well-being. Benefits begin on the first of the month following 30 days of employment. Exceptional Health Coverage Two medical plans, including HSA-qualified, with virtual care. Dental and vision coverage, including kids' orthodontia. HRA reimbursement eligibility. Employer-paid life and long-term disability insurance. Smart Financial Benefits 401(k) plan: Pre-tax and Roth options plus a generous employer matching contribution. Time Off & Work-Life Balance Enjoy 10 paid holidays and accrue PTO from your first day. Flexible workplace culture with career growth opportunities. Wellness & Support Access a robust Employee Assistance Program (EAP) with 24/7 support for you and your family. Resources to support mental, emotional, and financial well-being. Culture that Works for You Join a team that values integrity and innovation. Grow as a leader in industrial distribution with cutting-edge automation and supply chain solutions. Be part of a company that prioritizes people over profits. Venturi Supply and its affiliated companies are dedicated to fostering a diverse and inclusive workplace. We are an equal opportunity employer and do not discriminate against individuals based on race, national origin, gender, gender identity, sexual orientation, protected veteran status, disability, age, or any other legally protected status.

Hiring Bonus: $1000 after successful completion of 120 days and an acceptable attendance record. ABW offers a $2.00 per hour shift differential for swing shift employees. ABW is looking for intermediate and experienced aluminum and stainless steel TIG Fitter/Welders, who are motivated and take pride in producing quality fabricated parts and meeting or exceeding customer requirements and schedules. Fitter/Welder candidates must be able to read and understand shop drawings. They will be required to fit and weld components in accordance with weld procedures accounting for weld shrinkage with minimal supervision. All fit-up and welds are inspected by in-house and/or customer CWI's. ABW administers in-house testing and certification. In addition to welder qualification testing, Fitter/Welders will be evaluated on their ability to read and understand drawings, tolerances, and welding procedures. Pay rates are based on the number of welding processes and qualified positions that welders are certified for and dependent upon weld test results at time of interview. Benefits include health, dental, vision and voluntary benefits. 2 weeks of PTO per year to start. Swing shift: Work four 10-hour shifts, Monday through Thursday, 4:30 pm - 2:00 am. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and depth perception. ABW is a leader in the Aerospace, Defense, Nuclear and Energy industries. Our diversity allows us to maintain a prominent level of fabrication production during any downturn or difficult time. If you are looking for a career that offers high pay and outstanding benefits, we have a job opportunity for you! ABW is an equal opportunity employer. Job Type: Full-time Expected hours: 40 per week Benefits: 401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Vision insurance Experience level: 3 years Shift: 10 hour shift Swing shift Application Question(s): Are you at least 18 years of age? (Yes or No) When are you available to start work? What is your expected pay per hour? Our pay range is $20-$36 per hour, dependent upon weld tests and skill level. Have you previously worked with ABW Technologies in Arlington, WA? If yes, please list start and end dates. Will you be able to perform the essential functions of the job, with or without reasonable accommodation? (Yes or No) If no, please explain. Is there any reason you might be unable to meet our attendance requirements? (Yes or No). If yes, please explain. Can you pass a FCAW test in steel? (Yes or No) Can you pass a 6G GTAW (TIG) test in Aluminum? (Yes or No) Can you pass an open root stainless TIG weld test? (Yes or No) Are you able to fit and weld components in accordance with weld procedures accounting for weld shrinkage with minimal supervision? (Yes or No) Experience: TIG welding: 3 years (Required) Ability to Commute: Arlington, WA 98223 (Required) Work Location: In person

Spitzer, a recognized industry leader in designing and fabricating high-specification equipment, is currently seeking Structural Welders to join our team. What Does a Week in the Life of the Structural Welder Look Like? Uses overhead cranes, jib cranes and other lifting/rigging devices to move components in a safe manner is a plus. Practices good housekeeping skills and properly disposes of waste according to safety and environmental policies. Other duties as assigned by the Foreman. Must be able to pass a 3G weld test using MIG and FCAW (1/16 wire) Familiarity with AWS welding codes and standards Proficient with grinders, torches, and basic fabrication tools Ability to lift 50lbs and work in standing Read and interpret blueprints, technical drawings, and welding symbols Set up and operate welding equipment, including wire feeders and welders Inspect finished welds for quality and conformance to specifications Grind, cut and prep materials as needed Works productively with others to help determine best solutions. Understand and follow safety policies and procedures of the shop. Conforms to shop quality practices and procedures. Perform 3G structural welds using MIG and Fluxcore (FCAW-G, 1/16” wire) on steel structures and components. Must be required to pass employer performance tests or standard tests to meet certification standards of professional and technical associations. Skills (to Pay the Bills) Here's a list of a few competencies that the Structural Welder at Spitzer should have… Ability to follow shop procedures, quality procedures and safely practices. Must be have verbal skills with fluency for the responsibilities assigned. High School Diploma or its equivalent, and/or Trade School. Minimum two to four years of experience in welding fabrication of structural steel and verified structural weld test and/or demonstrated ability to perform basic skills according to testing requirements. Must be able to read and follow welding procedures. Must be able to perform 3G weld test. What's it like to be a part of the Spitzer Family? Spitzer is a fast-paced company that focuses on exceeding our customers' expectations on every project. We believe we provide exceptional value through the quality of our work, our commitment to safety and by delivering products on schedule. You'll find a unique team of individuals who continue to push the boundaries of what is possible. A diverse team, a great culture, and a positive work environment are just some of the things that make working at Spitzer so rewarding. Employee Driven Benefits At Spitzer, we take pride in listening to what our employees want in benefits. We've come up with a unique set of employee benefits and designed them around our culture. Health Care Insurance (multiple plans to choose from!) Dental Benefit options 401k plan Disability Insurance Paid Time Off that begins accruing your first day of employment Eight paid company holidays Plenty of Overtime Opportunities! Tuition Reimbursement Program Employee Discounts with LifeMart!! Oh, and $alary Of course, we didn't forget salary… Spitzer offers competitive pay depending on education, certifications, and experience. Work Schedule Spitzer currently runs two shifts, Monday through Friday with overtime on weekend work as needed. Late afternoon/evening/weekend hours may be required as needed. Work schedules may change to accommodate production needs. Application Process If this sounds like a great opportunity to you, follow the steps below: Visit our website to apply to complete Online Application Apply in Person at one of our locations: Orizon Division: 7007 FM 362, Brookshire, TX 77423 We look forward to hearing from you!

Crusoe's mission is to accelerate the abundance of energy and intelligence. We're crafting the engine that powers a world where people can create ambitiously with AI - without sacrificing scale, speed, or sustainability. Be a part of the AI revolution with sustainable technology at Crusoe. Here, you'll drive meaningful innovation, make a tangible impact, and join a team that's setting the pace for responsible, transformative cloud infrastructure. About This Role: Join Crusoe and play a crucial role in our manufacturing process as a Welder. You'll use your expertise in MIG and TIG welding to fabricate and assemble metal components for our innovative digital infrastructure solutions. Your work will directly contribute to the quality and efficiency of our operations. We're seeking a skilled and detail-oriented professional who can interpret blueprints, adhere to safety standards, and thrive in a collaborative team environment. This full-time position offers a dynamic work environment where your skills will be valued and your contributions will make a tangible impact. What You'll Be Working On: Blueprint Interpretation: Read and understand blueprints or product specifications to accurately plan welding projects. Welding Execution: MIG and TIG weld steel, aluminum, and stainless steel components according to specifications. Assembly and Fabrication: Accurately lay out parts, assemble, and make precise welds based on project requirements. Quality Assurance: Perform personal inspections and coordinate formal quality inspections to ensure zero defects and adherence to specifications. Safety Compliance: Ensure all work is performed safely and meets established quality standards. Workplace Organization: Maintain a clean and organized work area, properly caring for all equipment and facilities. Documentation and Inspection: Check finished work against blueprint tolerances and document results. Team Collaboration: Work effectively with team members to maximize productivity and efficiency. Material Handling: Lift raw materials, final products, and other items manually (up to 60 pounds). What You'll Bring to the Team: Welding Experience: 2+ years of working experience as a Welder. Welding Proficiency: Strong knowledge of various welding processes, with preferred skills in Spot, MIG, and TIG welding. Equipment Familiarity: Knowledge of working with welding tools and equipment. Material Expertise: Familiarity with stainless and mild steel. Fabrication Skills: Capability to work with tube or channel to fabricate trailers. Physical Capability: Ability to lift, lower, push, and pull merchandise up to 50 lbs and stand, walk, stoop, and bend for 8 hours or more daily. Attention to Detail: Must be detail-oriented. Teamwork: Must be a team player, willing to take on additional roles as needed. Education: High school diploma or GED. Bonus Points: Any welding certifications. Experience with specific welding techniques beyond MIG and TIG. Previous experience in a manufacturing environment related to trailer fabrication. Experience working with specific types of welding equipment. Benefits: Industry competitive pay Restricted Stock Units in a fast growing, well-funded technology company Health insurance package options that include HDHP and PPO, vision, and dental for you and your dependents Employer contributions to HSA accounts Paid Parental Leave Paid life insurance, short-term and long-term disability Teladoc 401(k) with a 100% match up to 4% of salary Generous paid time off and holiday schedule Cell phone reimbursement Tuition reimbursement Subscription to the Calm app MetLife Legal Company paid commuter benefit; $300 per month Compensation: Compensation will be in the range of $20-$30/hr + Bonus. Restricted Stock Units are included in all offers. Pay to be determined by the applicant's education, experience, knowledge, skills, and abilities, as well as internal equity and alignment with market data. Crusoe is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Hiring Bonus: $1000 after successful completion of 120 days and an acceptable attendance record ABW is looking for intermediate and experienced aluminum and stainless steel TIG Fitter/Welders, who are motivated and take pride in producing quality fabricated parts and meeting or exceeding customer requirements and schedules. Fitter/Welder candidates must be able to read and understand shop drawings. They will be required to fit and weld components in accordance with weld procedures accounting for weld shrinkage with minimal supervision. All fit-up and welds are inspected by in-house and/or customer CWI's. ABW administers in-house testing and certification. In addition to welder qualification testing, Fitter/Welders will be evaluated on their ability to read and understand drawings, tolerances, and welding procedures. ASME pressure vessel / tank manufacturing experience preferred, familiarity with nozzle schedules, weld maps, flux core and submerged arc experience is beneficial. Pay rates are based on the number of welding processes and qualified positions that welders are certified for and dependent upon weld test results at time of interview. Benefits include health, dental, vision and voluntary benefits. 2 weeks of PTO per year to start. Day shift: Work four 10-hour shifts, Monday through Thursday, 6 am-4:30 pm. Overtime as required. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand and use hands to finger, handle, or feel. The employee is occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision and depth perception. ABW is a leader in the Aerospace, Defense, Nuclear and Energy industries. Our diversity allows us to maintain a prominent level of fabrication production during any downturn or difficult time. If you are looking for a career that offers high pay and outstanding benefits, we have a job opportunity for you! ABW is an equal opportunity employer. Job Type: Full-time Day Shift & Swing Shift Benefits: 401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Vision insurance Experience level: 3 years Shift: 10 hour shift Day shift Application Question(s): Are you at least 18 years of age? (Yes or No) When are you available to start work? What is your expected pay per hour? Have you previously worked with ABW Technologies in Arlington, WA? If yes, please list start and end dates. Will you be able to perform the essential functions of the job, with or without reasonable accommodation? (Yes or No) If no, please explain. Is there any reason you might be unable to meet our attendance requirements? (Yes or No). If yes, please explain. Can you pass a FCAW test in steel? (Yes or No) Can you pass a 6G GTAW (TIG) test in Aluminum? (Yes or No) Can you pass an open root stainless TIG weld test? (Yes or No) Are you able to fit and weld components in accordance with weld procedures accounting for weld shrinkage with minimal supervision? (Yes or No) Experience: TIG welding: 3 years (Required) Shift availability: Day Shift (Required) Ability to Commute: Arlington, WA 98223 (Required) Work Location: In person

The Welder is responsible for welding in the garage. This position is responsible for understanding, supporting, and assisting the operational teams assigned with client specific tasks, standards, specification, and thorough understanding of all department operating policies and procedures. Our Core Values: TRAITS Trust, Respect, Accountability, Integrity, Teamwork, and Safety. Essential Functions: Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Roles and Responsibilities: Welds components in flat, vertical, or overhead positions Works with specialized equipment including welding and other necessary tools Works safely around backhoes, excavators, trenchers, and dump trucks Cleans and prepares construction sites to eliminate possible hazards Lays out, positions, aligns, and secures parts and assemblies prior to assembly, using straightedges, combination squares, calipers, and rulers Examines workpieces for defects and measures work pieces with straightedges or templates to ensure conformance with specifications Clamps, holds, tack-welds, heat-bends, grinds, or bolts component parts to obtain required configurations and positions for welding Selects and installs torches, torch tips, filler rods, and flux, according to welding chart specifications or types and thicknesses of metals Determines required equipment and welding methods, applying knowledge of metallurgy, geometry, and welding techniques Monitors the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material Analyzes engineering drawings, blueprints, specifications, sketches, work orders, and material safety data sheets to plan layout, assembly, and welding operations Marks or tags material with proper job number, piece marks, and other identifying marks as required Prepares all material surfaces to be welded, ensuring that there is no loose or thick scale, slag, rust, moisture, grease, or other foreign matter Preheats work pieces using torches to then guide and directs flames or electrodes on or across work pieces to connect pipe Detects faulty operation of equipment or defective materials and notifies supervisors Cleans or degreases parts, using wire brushes, and portable grinders Success Factors: Ability to perform heavy manual labor for extended periods, often under adverse climatic conditions.  Ability to lift up to 80 lbs multiple times during a work shift Ability to climb, dig, work in tight spaces, on uneven surfaces, walking, stooping, and kneeling Ability to understand and follow specific oral and written instructions Ability to work well independently and as a part of a team with co-workers Ability to pass motor vehicle, criminal background check, and comply with drug-free workplace policy English usage sufficient to keep records, place orders, and prepare simple narrative reports  Willingness and ability to learn additional skills Experience and Education: High school diploma or equivalent desired Previous Welding Experience Bilingual English/Spanish is a plus Additional Requirements/Licenses/Certifications: Possession of, or ability to obtain, a valid State of Residence Driver's License is required within two weeks of employment. Candidates must pass criminal and Motor Vehicle Record (MVR) background checks and pass a pre-employment drug screen. Notes: The statements herein are intended to describe the general nature and level of work being performed by employees and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.