Production Assembler jobs at Randstad North America, Inc.

A Day In The Life * Operator will be required to assemble and/or disassemble parts into subassemblies or finished units, and to receive and stock parts and supplies. Operator will be required to use hand tools, jigs, fixtures, machines, equipment, and other means to produce a good quality product. * Processes performed will be, but not limited to, assembling, drilling, pressing, testing, fitting, filing, and storing. * Operator may be required to make visual and manual inspections, check quality, assure alignment, position, tension, record production, record scrap, keep required production records, and other operations as required. * Operator will be required to set-up, operate and adjust machines and equipment as required. * Operator must have the ability to interpret drawings and routing sheets and perform SPC as required. * Operator will be required to furnish own hand tools. * Operator will be required to maintain machines, equipment and work area in a clean and orderly manner. * Operator must ensure that any hazardous waste generated must be properly packaged and labeled before removing from his/her area. What will help you thrive in this role? * Ability to sit and/or stand and perform repetitive work for a minimum of eight hours. * Ability to walk, hear, see and to have full use of both hands. * Ability to lift 50 lbs. from floor to waist and waist to floor. * Ability to climb steps. * Ability to lift in excess of 65 lbs. * These physical requirements are generalities and work may occasionally exceed the specified levels. Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class. The above summary of position responsibilities and requirements is not intended, and should not be construed, to be an exhaustive list of duties, skills, efforts, physical requirements, or working conditions associated with the position. It is intended to be an accurate reflection of those principal position elements essential for making decisions related to position performance, employee development, and compensation.

Price Electric is hiring in-shop Assemblers to meet its growing demand for quality prefabricated construction. Whether you enjoy assembling items with tools, are interested in becoming qualified to operate various equipment, or want to get your career started with a top local electrical contractor, we encourage you to apply today! Prefab Assemblers work Monday through Friday from 6:45 a.m. to 3:15 p.m. to safely, accurately, and timely produce electrical assemblies, frames, and products that are used in construction projects across the nation. Primary responsibilities include: 1. Following all safety rules and regulations and maintaining a clean, organized, and safe work environment 2. Identifying and using correct material and tooling from detailed parts lists and assembly instructions 3. Using established production processes and performing general electrical prefab tasks such as cutting, threading, bending, and assembling electrical components and subcomponents 4. Moving material with forklift and pallet jack (certification required) 5. Tracking production, quality control, and other information electronically 6. Learning advanced prefabrication skills in alignment with an employee's interests and abilities and department needs Physical demands include, but are not limited to, the ability to work 40 or more hours per week; frequent lifting of up to 50 lbs.; continuous standing, walking, bending, and/or twisting; repetitive use of hands for frequent grasping, pushing and pulling, and fine motor coordination; periodic squatting, kneeling, reaching overhead and climbing; repetitive use of feet for operating equipment, conduit benders and vertical climbing; and adequate vision for document reading and color coding to identify wire. Qualified candidates have proven reliability; effective communication and teamwork skills; ability to read a tape measure and perform basic math; good time management and organization; ability to read and understand job orders and construction drawings with training; and a high school diploma or GED. Experience using impact drills and performing mild steel MIG welds is beneficial. Founded in 1996, Price Electric is a national ABC electrical merit shop contractor that employs >200 daytime construction employees in industrial, commercial, residential, underground utility, traffic, service, and production settings. Full time Assemblers enjoy: Company-Paid Employee Vision, Short-Term Disability, Long Term Disability, and Life Insurance Affordable Elective Medical, Dental, Accident, and Voluntary Life Benefit Plans with Great Carriers Health Savings Account Company Contributions for Price Electric HDHP Participants and Advocacy Services for All Price Electric Medical Plan Participants Enhanced 401(k) Company Match on Employee Deferrals Professional Training and Career Development Opportunities Weekly Payroll Paid Holidays and Flexible Paid Time Off Company Clothing Discounted Tool Purchase Program Reimbursements on Safety Boots and Prescription Safety Glasses Any offer is contingent upon successfully passing a drug test and background screening. Price Electric is an Equal Opportunity Employer. Qualified candidates are encouraged to apply. Check us out to learn how you may have a rewarding career and Build Success - People, Projects, Partners.

Scientific Drilling is looking for a Manufacturing Assembler to join our Applied Technologies Center in Paso Robles, CA. Scientific Drilling is an independent directional drilling and wellbore navigation, surveying and logging service company serving customers in oil & gas and sustainable geothermal worldwide. We are motivated by crafting innovative solutions to technically challenging problems that support and advance our energy future. Nestled between San Francisco and Los Angeles, the California Central Coast is described as the happiest place on earth. The area features 200+ wineries, fresh air, miles of beautiful beaches, and small-town appeal. Our Manufacturing Assembler will work in our Manufactuing team and is expected to perform the essential duties listed below. Candidates must have authorization to work in the United States. Essential Duties and Responsibilities: Committed to Safety as a priority. Learn through hands-on training while focusing on achieving the necessary level of proficiency. Must be able to complete and pass the Solder training course and have the ability to maintain certification. Rely on instructions and pre-established guidelines to perform the functions of the job. Assemble mechanical and electrical assemblies and sub-assemblies using hand tools and calibrated equipment. Follow blueprints, work instructions, and wiring diagrams to assemble mechanical and electronic devices. Crimp, stake, screw, bolt, solder, epoxy, press fit, and/or perform similar operations to join or secure parts in place, using hand tools, power tools, machines, and equipment. Mount assembled components, such as transformers, resistors, transistors, capacitors, integrated circuits, and sockets on printed circuit boards and chassis. Connect component leads to printed circuit boards or routes and connects wires between individual component leads and other components, connectors, terminals and contact points using soldering procedures and equipment. May perform assembly operations under a microscope or another magnifying device. May be required to work in a Clean Room environment, must be able to adhere to the Clean Room standard operating procedure. Perform on-line go-not-go testing and inspection, using magnifying devices, measuring instruments, and electronic test equipment, to ensure parts and assemblies meet production specifications and standards. Learn applicable IPC standards. Must successfully complete solder training course (company provided). Strive for continual improvement to quality. Work efficiently to finish jobs in a timely manner. Work under supervision of Lead or Supervisor. Adhere to and improve safety standards. Manage workstation and practice good housekeeping techniques. May be required to work overtime. Pursue every job with drive and determination. Use logic to solve problems with effective solutions. Perform other relevant duties as assigned by the needs of the business. Job Knowledge, Skills, and Abilities: Ability to perform delicate and detailed assembly work while using hand tools and/or microscope, must possess steady manual dexterity. Knowledge of commonly used concepts, practices, and procedures within this field. Is personally committed to continual improvement. Listens and is able to communicate effectively with managers and peers, both written and verbally. Able to understand and follow instructions. Ability to work in fast paced and results driven environment. Strong attention to detail and ability to multitask. Good organizational and communication skills. Ability to present oneself with professional appearance and behavior in accordance with ATC dress code and SDI Code of Conduct. Ability to meet all SDI/ATC safety requirements. Ability to read, communicate, and understand the English language. Ability to communicate effectively with managers and peers, both written and verbally. Adhere to established Company procedures and policies, work schedule, attendance standards and is punctual to work and meetings. Contribute to team effort by accomplishing related results. Ability to be a team player/builder. Must be tactful and able to resolve disputes between departments and settle personnel Possess the ability to be interactive with management staff and co-workers. Education, Experience, Certification, and Training: High School Diploma or GED equivalent required. 1-3 years of experience infield or related area Experience with proper soldering techniques and ESD prevention a plus. Manual Dexterity and ability to use common hand tools is a plus. Basic MS Office skills (Word, Excel, Outlook). Current IPC Certificate a plus. Location, Physical Requirements, and PPE: Manufacturing: Ability to walk, stand, sit, kneel, push, stoop, reach above the shoulder, grasp, pull, bend repeatedly, identify colors, hear with aid, see , write, count, read, speak, analyze, alphabetize, lift and carry 25 lbs. and under, perceive depth, and operate motor equipment. Conditions include working inside. Working around moving objects, machines with moving parts. Working around radiant and electrical energy. Work with heated soldering iron and flux. Working closely with others, working alone, working extended or irregular hours. Working environment may include but not limited to, intermittent noise, fumes, smoke, grease, dust, oils and solvents. Equipment (machines, tools, devices) used in performing the essential job function include but not limited to computer and related equipment, calculator, special instrumentation, hand tools, power tools, air tools, microscope and telephone. Ability to wear proper personal protective equipment (PPE), including but not limited to, safety glasses, reinforced toed shoes, gloves, and ear plugs or muffs. This describes the general duties and responsibilities, and physical requirements associated with the position; it is not an exhaustive list of all duties, responsibilities, or skills required for the position. The general duties and responsibilities and physical requirements associated with the position are subject to modification in order to reasonably accommodate individuals with disabilities. Some physical requirements may exclude individuals who pose a threat or risk to the health or safety to themselves or others. This job description neither states nor implies that the listed general duties and responsibilities and physical requirements associated with the position are the only tasks expected of an employee. An employee is also required to follow any other job-related instructions and perform any other job-related tasks requested by their supervisor and not in violation of any applicable laws, regulations, or rules. Requirements are representative of minimum levels of knowledge, skills, and abilities. To perform this job successfully, an employee must possess the abilities and aptitudes to perform each duty, responsibility, and physical requirement proficiently. Employment at Scientific Drilling International is on an "at-will" basis.

Scientific Drilling is looking for a Manufacturing Assembler to join our Applied Technologies Center in Paso Robles, CA. Scientific Drilling is an independent directional drilling and wellbore navigation, surveying and logging service company serving customers in oil & gas and sustainable geothermal worldwide. We are motivated by crafting innovative solutions to technically challenging problems that support and advance our energy future. Nestled between San Francisco and Los Angeles, the California Central Coast is described as the happiest place on earth. The area features 200+ wineries, fresh air, miles of beautiful beaches, and small-town appeal. Our Manufacturing Assembler will work in our Manufactuing team and is expected to perform the essential duties listed below. Candidates must have authorization to work in the United States. Essential Duties and Responsibilities: * Committed to Safety as a priority. * Learn through hands-on training while focusing on achieving the necessary level of proficiency. * Must be able to complete and pass the Solder training course and have the ability to maintain certification. * Rely on instructions and pre-established guidelines to perform the functions of the job. * Assemble mechanical and electrical assemblies and sub-assemblies using hand tools and calibrated equipment. * Follow blueprints, work instructions, and wiring diagrams to assemble mechanical and electronic devices. * Crimp, stake, screw, bolt, solder, epoxy, press fit, and/or perform similar operations to join or secure parts in place, using hand tools, power tools, machines, and equipment. * Mount assembled components, such as transformers, resistors, transistors, capacitors, integrated circuits, and sockets on printed circuit boards and chassis. * Connect component leads to printed circuit boards or routes and connects wires between individual component leads and other components, connectors, terminals and contact points using soldering procedures and equipment. * May perform assembly operations under a microscope or another magnifying device. * May be required to work in a Clean Room environment, must be able to adhere to the Clean Room standard operating procedure. * Perform on-line go-not-go testing and inspection, using magnifying devices, measuring instruments, and electronic test equipment, to ensure parts and assemblies meet production specifications and standards. * Learn applicable IPC standards. Must successfully complete solder training course (company provided). * Strive for continual improvement to quality. * Work efficiently to finish jobs in a timely manner. * Work under supervision of Lead or Supervisor. * Adhere to and improve safety standards. * Manage workstation and practice good housekeeping techniques. * May be required to work overtime. * Pursue every job with drive and determination. * Use logic to solve problems with effective solutions. * Perform other relevant duties as assigned by the needs of the business. Job Knowledge, Skills, and Abilities: * Ability to perform delicate and detailed assembly work while using hand tools and/or microscope, must possess steady manual dexterity. * Knowledge of commonly used concepts, practices, and procedures within this field. * Is personally committed to continual improvement. * Listens and is able to communicate effectively with managers and peers, both written and verbally. * Able to understand and follow instructions. * Ability to work in fast paced and results driven environment. * Strong attention to detail and ability to multitask. * Good organizational and communication skills. * Ability to present oneself with professional appearance and behavior in accordance with ATC dress code and SDI Code of Conduct. * Ability to meet all SDI/ATC safety requirements. * Ability to read, communicate, and understand the English language. * Ability to communicate effectively with managers and peers, both written and verbally. * Adhere to established Company procedures and policies, work schedule, attendance standards and is punctual to work and meetings. * Contribute to team effort by accomplishing related results. * Ability to be a team player/builder. * Must be tactful and able to resolve disputes between departments and settle personnel * Possess the ability to be interactive with management staff and co-workers. Education, Experience, Certification, and Training: * High School Diploma or GED equivalent required. * 1-3 years of experience infield or related area * Experience with proper soldering techniques and ESD prevention a plus. * Manual Dexterity and ability to use common hand tools is a plus. * Basic MS Office skills (Word, Excel, Outlook). * Current IPC Certificate a plus. Location, Physical Requirements, and PPE: Manufacturing: * Ability to walk, stand, sit, kneel, push, stoop, reach above the shoulder, grasp, pull, bend repeatedly, identify colors, hear with aid, see , write, count, read, speak, analyze, alphabetize, lift and carry 25 lbs. and under, perceive depth, and operate motor equipment. * Conditions include working inside. Working around moving objects, machines with moving parts. Working around radiant and electrical energy. Work with heated soldering iron and flux. Working closely with others, working alone, working extended or irregular hours. Working environment may include but not limited to, intermittent noise, fumes, smoke, grease, dust, oils and solvents. * Equipment (machines, tools, devices) used in performing the essential job function include but not limited to computer and related equipment, calculator, special instrumentation, hand tools, power tools, air tools, microscope and telephone. Ability to wear proper personal protective equipment (PPE), including but not limited to, safety glasses, reinforced toed shoes, gloves, and ear plugs or muffs. This describes the general duties and responsibilities, and physical requirements associated with the position; it is not an exhaustive list of all duties, responsibilities, or skills required for the position. The general duties and responsibilities and physical requirements associated with the position are subject to modification in order to reasonably accommodate individuals with disabilities. Some physical requirements may exclude individuals who pose a threat or risk to the health or safety to themselves or others. This job description neither states nor implies that the listed general duties and responsibilities and physical requirements associated with the position are the only tasks expected of an employee. An employee is also required to follow any other job-related instructions and perform any other job-related tasks requested by their supervisor and not in violation of any applicable laws, regulations, or rules. Requirements are representative of minimum levels of knowledge, skills, and abilities. To perform this job successfully, an employee must possess the abilities and aptitudes to perform each duty, responsibility, and physical requirement proficiently. Employment at Scientific Drilling International is on an "at-will" basis.

The Assembler works on the assembly line by feeding raw materials into machinery, assembling goods on the line, and attaching labels and logos to finished products. A Day In The Life * Read, interpret, and follow basic blueprints, diagrams, engineering drawings, specifications, and other written instructions or procedures to accurately assemble equipment and products * Utilize hand held tools such as a handheld air guns and wrenches * Monitor and maintain inventory of product in work stations * Rework and/or repair assembled equipment and products according to engineering specification changes * Constant standing, walking, pushing pulling, bending, stooping, and lifting repetitively up to 35lbs. What will help you thrive in this role? * Minimum of 2 years' manufacturing experience * Proficient at reading a tape measure * High attention to detail and self-motivation skills * Basic computer navigation and utilization skills preferred * Must have regular and reliable attendance and perform work at the plant/warehouse Competencies Hubbell Incorporated Hubbell creates critical infrastructure solutions that power our customers, communities, people and the planet. Our company is strategically aligned around enabling grid modernization and electrification. As more products plug in to an aging grid, Hubbell solutions enable the transition to a more reliable, resilient and efficient energy infrastructure. Founded in 1888 our innovation has made us a leading global manufacturer of high quality electrical and utility solutions enabling customers to operate critical infrastructure reliably and efficiently. The company operates in two segments. Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications and Hubbell Electrical Solutions (HES) are essential to managing power across a wide range of industries and applications. Our vertical market solutions can be applied to markets including Data Centers, Renewables, Commercial Buildings, Industrial, Telecom and Transportation. Supporting both of our business segments is our corporate and Hubbell Unified Business Solutions teams that provide consistent process, tools technologies across our businesses. We are committed to operating sustainably and ethically while promoting an inclusive and supportive culture for our people to grow and develop in their careers. Our employees proudly work and serve our communities from our headquarters in Shelton, CT, across the United States and around the globe. Hubbell Utility Solutions Hubbell Utility Solutions (HUS) enable the grid to conduct, communicate and control energy across utility applications. HUS provides the critical components that allow the grid to reliably transmit and distribute energy, as well as the communications and controls technologies to make the grid smarter and more flexible. Hubbell Incorporated, its subsidiaries and affiliates, is an EO Employer AA: M/F/Veteran/Disability. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identity or any other protected class.

Title: Assembler 1 Pioneer the next generation of innovation. Join us and you'll develop your skills and expertise to the very highest levels, working in an international environment for a company known the world over for its brilliance. This position assembles generator sets and sub-assemblies that include both standard and non-standard product lines. This will require using hand and power tools and following quality and procedural techniques. Key Accountabilities: * Use work instructions, drawings, schematics and equipment used to perform basic assembly duties in a limited number of work areas (i.e. Final Assembly and Sub-Assembly). * Cross train in multiple assembly areas and help in other areas based on necessity. * Develop and maintain an understanding of the products assembled and continuous learning of the principles, practices and processes of their job as changes require. * Recognize obvious defective or damaged parts, incorrect sizes, faulty workmanship and general quality. * Responsible for following safety and environmental procedures and established processes and policies. * Provide input on continuous improvement opportunities within the department * Promote a compliance culture in area of responsibility and live the letter and the spirit of the Rolls Royce Code of Conduct. * Perform special projects as required Basic Requirements: * Applicants must be authorized to work for any employer in the U.S without sponsorship. We are unable to sponsor or take over sponsorship of an employment Visa at this time * High School Diploma or GED * Ability to lift and carry 50 lbs. frequently Preferred Qualifications: * Basic mechanical knowledge and use of tools * Basic ability to solve practical problems and deal with a variety of concrete variables * Basic ability to perform repetitive tasks in a manufacturing environment * Ability to deliver results in a fast-paced environment * Demonstrates proficiency in both oral and written communication as well as communicate in a team environment * Quality and detail orientation and basic organizational skills * Good command of the English language, both written and verbal * Basic ability to learn and adapt to changing technology * Basic ability to use a variety of hand and power tools Rolls-Royce is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to any protected characteristics. At Rolls-Royce, we are committed to creating a workplace where all employees feel respected, supported, and empowered to do their best work. We foster a welcoming and innovative work environment that invests in you, giving you access to an incredible breadth and depth of opportunities where you can grow your career and make a difference. Job Posting Date 01 Dec 2025; 00:12 Pay Range $18.65 - $27.97-Hourly Location: Mankato, MN Benefits Rolls-Royce provides a comprehensive and competitive Total Rewards package that includes base pay and a discretionary bonus plan. Eligible employees may have the opportunity to enroll in other benefits, including health, dental, vision, disability, life and accidental death & dismemberment insurance; a flexible spending account; a health savings account; a 401(k) retirement savings plan with a company match; Employee Assistance Program; Paid Time Off; certain paid holidays; paid parental and family care leave; tuition reimbursement; and a long-term incentive plan. The options available to an employee may vary depending on eligibility factors such as date of hire, and employment type. The Business Unit Power Systems of Rolls-Royce provides world-class power solutions and complete life-cycle support under our product and solution brand mtu. Through digitalization and electrification, we strive to develop drive and power generation solutions that are even cleaner and smarter and thus provide answers to the challenges posed by the rapidly growing societal demands for energy and mobility. We deliver and service comprehensive, powerful and reliable systems, based on both gas and diesel engines, as well as electrified hybrid systems. These clean and technologically-advanced solutions serve our customers in the marine and infrastructure sectors worldwide.

We are Generac, a leading energy technology company committed to powering a smarter world. Over the 60 plus years of Generac's history, we've been dedicated to energy innovation. From creating the home standby generator market category, to our current evolution into an energy technology solutions company, we continue to push new boundaries. 2nd shift: Monday - Friday 3:00 PM - 11:30 PM Pay Rate: $22.00 per hour (Assembler I) Pay Rate: $23.00 per hour (Assembler II) JOB SUMMARY: ASSEMBLER I: The Assembler I is responsible for performing basic assembly work to manufacture products in a cost effective and timely manner while fulfilling quality standards. The Assembler I will validate material prior to beginning assembly, review work instructions, build product per specifications and within tolerances, complete all clean-up and housekeeping procedures, comply with all quality, safety and work rules and regulations including wearing all appropriate PPE. ASSEMBLER II The Assembler II is responsible for performing complex assembly work to manufacture products in a cost effective and timely manner while fulfilling quality standards. The Assembler II will validate material prior to beginning assembly, review work instructions, build product per specifications and within tolerances, complete all clean-up and housekeeping procedures, comply with all quality, safety and work rules and regulations including wearing all appropriate PPE. The Assembler II will also train other employees. ASSEMBLER III: The Assembler III is responsible for performing complex assembly work to manufacture products in a cost effective and timely manner while fulfilling quality standards. The Assembler III will validate material prior to beginning assembly, review work instructions, build product per specifications and within tolerances, complete all clean-up and housekeeping procedures, comply with all quality, safety and work rules and regulations including wearing all appropriate PPE. Additionally, the Assembler III will frequently train other employees and participate in continuous improvement programs along with problem solving production related concerns. MINIMUM QUALIFICATIONS: ASSEMBLY I: • Ability to perform highly repetitive assembly tasks in a manufacturing environment. ASSEMBLY II: • High school diploma or equivalent and/or 1 year of complex assembly or related experience • Internal: Demonstrated Assembler II competency ASSEMBLY III: • High school diploma or equivalent • 2 years of complex assembly or related experience • Internal: Demonstrated Assembler III competency & High school diploma or equivalent PREFERRED QUALIFICATIONS: ASSEMBLY I: • High school diploma or equivalent • Manufacturing experience, including knowledge of manufacturing processes or related experience ASSEMBLY II: • Experience using SAP or equivalent ERP system ASSEMBLY III • Experience in root cause problem solving (5 Why, 8D, PDCA, etc.) • Experience effectively training other employees to work instructions/standard work. • Previous experience using SAP or equivalent ERP system (Oracle, JD Edwards, Microsoft Dynamics) ESSENTIAL DUTIES 70% Uses work instructions drawings, schematics, electronic assembly equipment to perform assembly while complying with safe and effective operation standards of all equipment and tools. ASSEMBLY II Resolves problems with assistance from peers or supervisor depending on the level and complexity. ASSEMBLY III Uses initiative and judgment to lead problem solving and implementing appropriate countermeasures. 20% Cross trains in multiple assembly areas and flex to other similar departments based on business necessity. Provide training frequently to new employees and current employees learning new work areas on work instructions/standard work. 10% Develop and maintain an understanding of the products they assemble and how it impacts the business. Continuous learning of the principles, practices, and processes of their job as changes require and similar jobs. ASSSEMBLY II/III Suggest and implement improvements of existing equipment, designs, and/or processes to improve safety, quality, delivery and productivity. OTHER DUTIES AS ASSIGNED, INCLUDING: • Follow established procedures, processes, or policies. • Demonstrates good attendance, quality, attention to detail and all safety policies. • Participate in team meetings to exchange job related information. ASSEMBLY I: • Resolve problems with assistance from peers or supervisors depending on the level and complexity. ASSEMBLY II: • Ability to access information needed within ERP system. • Contributes to improving processes, lead times, through-put and cost. ASSEMBLY III: • Proficiently access information and perform transactions as needed within ERP system. • Leading in team meets and exchange job related information • Solve problems independently within designated authority level KNOWLEDGE, SKILLS AND ABILITIES: ASSEMBLY I • Detail oriented and organized. • Ability to effectively communicate in a team environment. • Accepts responsibility for own actions, follows through on commitments. • Ability to understand and execute basic standard assembly procedures, interpret basic visual diagrams, and use basic hand tools. • Ability to perform basic reading, writing, and math functions. ASSEMBLY II • Contributes to identifying problems and implementing appropriate countermeasures. • Ability to understand and execute basic standard procedures, interpret basic visual diagrams, and use advanced tooling. • Ability to perform more complex assembly skills. • Intermediate computer knowledge (such as using electronic work instructions) • Understands principles of basic machine operations. ASSEMBLY III • Consistently follows through on team commitments, communicates, and demonstrates accountability. • Ability to understand and execute advanced standard procedures, interpret basic visual diagrams, and use advanced tooling. • Ability to problem solve with minimal guidance. LEVEL OF INDEPENDENCE: ASSEMBLY I/II/III Reports to Production Supervisor Physical Demands: While performing the duties of this job, the employee is regularly required to talk and hear; and use hands to manipulate objects or controls. The employee is regularly required to stand and walk. On occasion the incumbent may be required to stoop, bend or reach above the shoulders. The employee must occasionally lift up to 25 - 50 pounds. Specific conditions of this job are typical of frequent and continuous computer-based work requiring periods of sitting, close vision and ability to adjust focus. Occasional travel. “We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, disability status, protected veteran status, or any other characteristic protected by law.”

Job Description Responsibilities for this role include spooling, visual inspection, installation and packaging of coiled tubing for both domestic and international shipments. Working in small teams, spooling technicians utilize proprietary spooling equipment to execute tasks for both internal and external customers while interacting with operational departments throughout Global Tubing. Job Duties/Responsibilities Perform work in a professional and safe manner, report unsafe work practices Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists. Gathers parts, subassemblies, tools, and materials. Assembles parts and spool equipment as instructed. Maintains safe and clean work environment. Conserves resources by using equipment and supplies as needed to accomplish job results. Other duties as assigned. Skills/Knowledge Have knowledge of safe work practices Ability to read and understand training materials and work instructions Work in a fast paced environment Have physical strength and ability to perform moderate to heavy duty manual labor Education High School Diploma or equivalent. Experience 6 months - 1 year of experience Valid drivers license About FET FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries. FET is headquartered in Houston, TX with quality manufacturing, efficient distribution, and service facilities conveniently located to support the major energy-producing regions of the world. Forum's products and services range from the underwater reservoir to the refinery, from the sea floor to the above ground transportation line. We pride ourselves on giving you a comprehensive offering of solutions to maximize your operations and improve your bottom line. Our customers are our partners and we work with them to solve their ever-changing challenges. FET is an Equal Opportunity Employer. FET does not discriminate on the basis of race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected under federal, state, or local law. All employment decisions and practices at FET are subject to the foregoing non-discrimination provisions and are based solely on merit, competence, performance, and business needs at the time.

Responsibilities for this role include spooling, visual inspection, installation and packaging of coiled tubing for both domestic and international shipments. Working in small teams, spooling technicians utilize proprietary spooling equipment to execute tasks for both internal and external customers while interacting with operational departments throughout Global Tubing. Job Duties/Responsibilities * Perform work in a professional and safe manner, report unsafe work practices * Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists. * Gathers parts, subassemblies, tools, and materials. * Assembles parts and spool equipment as instructed. * Maintains safe and clean work environment. * Conserves resources by using equipment and supplies as needed to accomplish job results. * Other duties as assigned. Skills/Knowledge * Have knowledge of safe work practices * Ability to read and understand training materials and work instructions * Work in a fast paced environment * Have physical strength and ability to perform moderate to heavy duty manual labor Education * High School Diploma or equivalent. Experience * 6 months - 1 year of experience * Valid drivers license About FET FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries. FET is headquartered in Houston, TX with quality manufacturing, efficient distribution, and service facilities conveniently located to support the major energy-producing regions of the world. Forum's products and services range from the underwater reservoir to the refinery, from the sea floor to the above ground transportation line. We pride ourselves on giving you a comprehensive offering of solutions to maximize your operations and improve your bottom line. Our customers are our partners and we work with them to solve their ever-changing challenges. FET is an Equal Opportunity Employer. FET does not discriminate on the basis of race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected under federal, state, or local law. All employment decisions and practices at FET are subject to the foregoing non-discrimination provisions and are based solely on merit, competence, performance, and business needs at the time.

SEC Energy is a single-source provider of natural gas compression equipment, parts and services to all segments of the oil & gas industry. From 50 to 8,000 horsepower, gas, electric or dual drive, SEC is capable of designing and fabricating equipment to meet each customer's specific operating requirements. SEC also provides production, processing, and treating equipment, and an expansive network of warehouses that service locations across the United States. SEC capabilities expand beyond tradition manufacturing to further include turnkey engineering services, truck-based service technicians, manufacturer parts, and power generation equipment. Essential Duties & Responsibilities: * Reads shop notes, general arrangement and process flow diagrams and drawings. * Reads measuring devices such as tape measures, rulers and pressure gauges. * Assembles and installs skid mounted components such as pumps, vessels, pipe, pipe supports, structural supports, belts, pulleys and machine guards. * Performs pneumatic and mechanical tests on assembled components. * Disassembles components to replace defective parts or to prepare them for shipping. * Operates a variety of portable hand, electric and air powered tools such as impact wrenches, torque wrenches, combination wrenches, sockets, ratchets, band saw and grinders. * Operates stationary tools such as bench grinder, iron worker, drill press and chop saw. * Operates lifting equipment such as overhead cranes and jib cranes. * Records serial numbers and other information as required in ITP (inspection test plan). * Reports problems to line supervisor and actively participates in resolution. * Perform job duties in a safe manner and according to company safety procedures. * Reports potentially unsafe equipment and safety hazards to supervisor for immediate resolution. * Understands and follows oral and written instructions. * Establish and maintain effective working relationships with all departments and workers. * Actively participates in the development of Assembler I and other employees. * Performs the above and other duties as required with minimal supervision. Required education or minimum level: * High school education (GED) Experience: * 0-2 Years experience in compression related assembly or field environment. Skills: * Mechanical aptitude. * Ability to read tape measures and rulers in increments of 1/16" * Basic mathematic ability to add and subtract fractions, decimals and whole numbers. * Must have basic knowledge of commonly-used concepts, practices, and procedures within the assembly department. Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Lifting up to 50 lbs. occasionally * Walking and standing frequently * Exposure to adverse weather, cramped conditions and some heavy lifting * Works in industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment

SEC Energy is a single-source provider of natural gas compression equipment, parts and services to all segments of the oil & gas industry. From 50 to 8,000 horsepower, gas, electric or dual drive, SEC is capable of designing and fabricating equipment to meet each customer's specific operating requirements. SEC also provides production, processing, and treating equipment, and an expansive network of warehouses that service locations across the United States. SEC capabilities expand beyond tradition manufacturing to further include turnkey engineering services, truck-based service technicians, manufacturer parts, and power generation equipment. Essential Duties & Responsibilities: * Reads shop notes, general arrangement and process flow diagrams and drawings. * Reads measuring devices such as tape measures, rulers and pressure gauges. * Assembles and installs skid mounted components such as pumps, vessels, pipe, pipe supports, structural supports, belts, pulleys and machine guards. * Performs pneumatic and mechanical tests on assembled components. * Disassembles components to replace defective parts or to prepare them for shipping. * Operates a variety of portable hand, electric and air powered tools such as impact wrenches, torque wrenches, combination wrenches, sockets, ratchets, band saw and grinders. * Operates stationary tools such as bench grinder, iron worker, drill press and chop saw. * Operates lifting equipment such as overhead cranes and jib cranes. * Records serial numbers and other information as required in ITP (inspection test plan). * Reports problems to line supervisor and actively participates in resolution. * Perform job duties in a safe manner and according to company safety procedures. * Reports potentially unsafe equipment and safety hazards to supervisor for immediate resolution. * Understands and follows oral and written instructions. * Establish and maintain effective working relationships with all departments and workers. * Actively participates in the development of Assembler I and other employees. * Performs the above and other duties as required with minimal supervision. Required education or minimum level: * High school education (GED) Experience: * 4+ years experience in compression related assembly or field environment. Skills: * Mechanical aptitude. * Ability to read tape measures and rulers in increments of 1/16" * Basic mathematic ability to add and subtract fractions, decimals and whole numbers. * Must have basic knowledge of commonly-used concepts, practices, and procedures within the assembly department. Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Lifting up to 50 lbs. occasionally * Walking and standing frequently * Exposure to adverse weather, cramped conditions and some heavy lifting * Works in industrial/manufacturing settings, which may include exposure to various materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment

Job Description The preparation, assembly, and repair of various types of oilfield products. Shipping and Receiving of repaired goods, as well as delivery. Stamping and labeling equipment. Able to operate air tools. Responsible for ensuring compliance with established corporate standards. Comply and participate in the company Health and Safety program. Housekeeping of shop and work area. Other duties as assigned. Job Duties/Responsibilities Comply and participate in the company Health and Safety program. The preparation, assembly and repair of various types of oilfield products. Assemble multiple components into completed skidded packages. Shipping and Receiving of repaired goods, as well as delivery. Stamping and labeling equipment. Responsible for ensuring compliance with established corporate standards. Housekeeping of shop and work area. Assembling piping on skidded vessels, threaded/non-threaded. Measuring, pipe wrenching threaded pipe. Other duties as assigned. Skills/Knowledge Ability to read and comprehend instructions. Able to operate air tools Ability to read blue prints, follow instructions, and read measurements. Work in a fast paced environment. The employee must regularly lift and/or move up to 20 pounds, frequently lift and/or move up to 50 pounds. The employee must be able to operate a forklift while loading or unloading freight. Education High School Diploma or equivalent. Valid driver's license required. Experience 6+ months. About FET FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries. FET is headquartered in Houston, TX with quality manufacturing, efficient distribution, and service facilities conveniently located to support the major energy-producing regions of the world. Forum's products and services range from the underwater reservoir to the refinery, from the sea floor to the above ground transportation line. We pride ourselves on giving you a comprehensive offering of solutions to maximize your operations and improve your bottom line. Our customers are our partners and we work with them to solve their ever-changing challenges. FET is an Equal Opportunity Employer. FET does not discriminate on the basis of race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected under federal, state, or local law. All employment decisions and practices at FET are subject to the foregoing non-discrimination provisions and are based solely on merit, competence, performance, and business needs at the time.

The preparation, assembly, and repair of various types of oilfield products. Shipping and Receiving of repaired goods, as well as delivery. Stamping and labeling equipment. Able to operate air tools. Responsible for ensuring compliance with established corporate standards. Comply and participate in the company Health and Safety program. Housekeeping of shop and work area. Other duties as assigned. Job Duties/Responsibilities * Comply and participate in the company Health and Safety program. * The preparation, assembly and repair of various types of oilfield products. * Assemble multiple components into completed skidded packages. * Shipping and Receiving of repaired goods, as well as delivery. * Stamping and labeling equipment. * Responsible for ensuring compliance with established corporate standards. * Housekeeping of shop and work area. * Assembling piping on skidded vessels, threaded/non-threaded. * Measuring, pipe wrenching threaded pipe. * Other duties as assigned. Skills/Knowledge * Ability to read and comprehend instructions. * Able to operate air tools * Ability to read blue prints, follow instructions, and read measurements. * Work in a fast paced environment. * The employee must regularly lift and/or move up to 20 pounds, frequently lift and/or move up to 50 pounds. * The employee must be able to operate a forklift while loading or unloading freight. Education * High School Diploma or equivalent. * Valid driver's license required. Experience * 6+ months. About FET FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries. FET is headquartered in Houston, TX with quality manufacturing, efficient distribution, and service facilities conveniently located to support the major energy-producing regions of the world. Forum's products and services range from the underwater reservoir to the refinery, from the sea floor to the above ground transportation line. We pride ourselves on giving you a comprehensive offering of solutions to maximize your operations and improve your bottom line. Our customers are our partners and we work with them to solve their ever-changing challenges. FET is an Equal Opportunity Employer. FET does not discriminate on the basis of race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected under federal, state, or local law. All employment decisions and practices at FET are subject to the foregoing non-discrimination provisions and are based solely on merit, competence, performance, and business needs at the time.

Job Details Entry OK Corporate - Oklahoma City, OK Full Time High School $18.00 Hourly None Day ManufacturingDescription Preparing parts and components for sub-assemblies and full valve assembly. ESSENTIAL JOB FUNCTIONS: - Clean parts and components in a parts washer using specified solvent and chemicals as required wearing appropriate Personal Protective Equipment. - Prepare parts for the next stage of assembly process as instructed by supervisor or trainer. - Put together sub-assemblies. - Check all work for quality. - Verifies part quantities and quality against work orders. - Identifies and is accountable for various parts and materials. - Fills out any paperwork and logs as necessary for tracking purposes. - Complies with Safety policy and practice. - Reads blue prints, charts, calipers, micrometers, and other measuring devices. - Operating a forklift as needed to complete job tasks. - Supporting and helping out in other assembly departments per production demands. *Employee may be required to work more or less than 40 hours/week as part of their regular schedule based on production needs. Qualifications SKILLS REQUIRED: - Ability to operate a forklift is preferred. - Ability to function effectively both individually and as part of a team. - Detail Oriented. - Ability to multi-task and prioritize. - Strong organization skills. - Must be reliable and punctual with a strong work ethic - Prior experience in general assembly is a plus but not required. - Ability to lift 51lbs or more on occasion with a lifting partner.

Assembles or fabricates mechanical parts, pieces or products. Utilizes a variety of tools and equipment to assemble units according to required specifications in a specific area. Reads and interpreting blueprints, sketches and written instructions to assemble the parts or products. Identifies faulty components during the assembly process and may be required to test assembled parts or products to ensure functionality Job Duties/Responsibilities Perform work in a professional and safe manner, report unsafe work practices Maintain and build specialty industrial equipment. Assemble and manufacture machinery as per specifications provided by superiors. Assemble and pack items for a specific project according to a packing list provided by superiors. Test completed machinery per guidelines. Assist with building and yard maintenance as needed. Assist with inventory updates. Assist and rebuild machinery returned from projects. Other duties as assigned. Skills/Knowledge Good mechanical background. Require ability to operate forklifts and other material moving equipment Ability to follow instructions. Education High School Degree or equivalent. Successful completion of welding tests and qualifications. Experience 1+ year of experience. This is a safety sensitive position. About FET FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries. FET is headquartered in Houston, TX with quality manufacturing, efficient distribution, and service facilities conveniently located to support the major energy-producing regions of the world. Forum's products and services range from the underwater reservoir to the refinery, from the sea floor to the above ground transportation line. We pride ourselves on giving you a comprehensive offering of solutions to maximize your operations and improve your bottom line. Our customers are our partners and we work with them to solve their ever-changing challenges. FET is an Equal Opportunity Employer. FET does not discriminate on the basis of race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected under federal, state, or local law. All employment decisions and practices at FET are subject to the foregoing non-discrimination provisions and are based solely on merit, competence, performance, and business needs at the time.

The preparation, assembly, and repair of various types of oilfield products. Shipping and Receiving of repaired goods, as well as delivery. Stamping and labeling equipment. Able to operate air tools. Responsible for ensuring compliance with established corporate standards. Comply and participate in the company Health and Safety program. Housekeeping of shop and work area. Other duties as assigned. Job Duties/Responsibilities Computer literacy including software and database management is required. Provides technical and clerical support for related professional and technical personnel in the department. Performs independent, routine or repetitive assignments using a variety of simple techniques and standard work procedures. Constructing components to specifications. Ensuring successful use of components. Collecting materials and equipment. Examining connections for proper fit. Works within established guidelines. Skills/Knowledge Prolonged periods of time standing and/or walking performing repetitive tasks. Must be able to operate power tools Bend, stretch, twist, or reach out React quickly using hands, fingers, or feet Use muscles to lift, push, pull, or carry heavy objects. Ability to read and comprehend instructions. Possess basic written communication skills. Work in a fast-paced environment. Ability to stand and perform repetitive tasks for an extended period. Hand-eye coordination and strong attention to details. The employee must regularly lift and/or move up to 20 pounds, frequently lift and/or move up to 50 pounds. The employee must be able to operate a forklift while loading or unloading freight. Education High School Diploma or equivalent. Valid driver's license required. Experience Entry Level.

Job Details Entry Geospace Technologies - Houston, TX Full Time High School DayDescription This position will inspect, repair, and modify manufactured products that do not meet quality standards as set forth by the company prior to shipment to customer. Duties/Responsibilities: Perform regular quality assessments on all incoming materials and outgoing products. Reject all incoming products and materials that fail to meet quality expectations. Performing assigned product manufacturing and assembly tasks. Conduct quality checks on the functionality of parts and components. Adding “finishing touches” to the appearance of components. (Honing, sanding, refining edges, etc.) Optimizing production efficiency by adjusting machinery and equipment settings as needed. Performing minor repairs and reporting breakdowns in a timely manner. Keeping equipment maintenance logs, as well as maintaining a safe and tidy work environment. Ensure that items are undamaged prior to moving them to the Final Test stage. Collaborate with other departments to complete production orders on time. Prep, pack, and label items prior to shipping. Comply with internal policies and industry regulations. Perform other work-related tasks. At Geospace our employees enjoy benefits to support their physical, financial, and emotional wellness. These benefits include: • Comprehensive medical, dental and vision plans • 401(k) with a percentage match • Supplemental insurance options • Paid time-off program with paid holidays • Paid volunteer hours, and charitable giving matches Qualifications A minimum of six months' experience in a manufacturing environment is required. Must be able to communicate in English, to give and receive written and verbal instructions. Education/Experience requirements: High School Diploma or GED Equivalent Basic Computer Skills, needed for data logging and tracking production. Physical Requirements: Operators need to be able to lift up to 40 pounds. Perform repetitive tasks and stand for long periods of time. Equal Opportunity Message: All qualified candidates will receive consideration for all positions without regard to race, color, religion, sex, age, national origin, veteran status, disability, political affiliation, marital status, sexual orientation, or other non-merit factors. Must be eligible to work in the US permanently without sponsorship.

John Crane, a business of Smiths Group, is a global leader in mission-critical flow control solutions for energy and process industries that enable efficient and sustainable operations. Our products include mechanical seals and systems, couplings, bearings, filtration systems, and predictive digital monitoring technologies. We have a global network of more than 200 sites in over 50 countries and employ more than 6,000 people worldwide. We partner with our customers to help them keep their operations safe, reduce downtime, improve efficiency, and meet the latest environmental standards. John Crane is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, helping to create a safer, more efficient, productive, and better-connected world across four global markets: energy, security & defence, space & aerospace, and general industrial. Listed on the London Stock Exchange, Smiths employs approximately 16,000 colleagues in over 50 countries. Job Description Work manufacturing stations to build product using shop packets, drawings and standard or verbal instructions. Work alongside other assemblers to train and assist. Review work orders for special instructions, quantities & part numbers. Review parts provided to ensure that they conform to the job requirements. Assemble, test and visually inspect products or sub-assemblies including those of Assembler II and Nitrogen Booster Systems, Plan 53B's, standard lubrication systems as well as more complex standard Gas Control Panels. Ensure assembled parts meet the drawing specifications for dimensions and level tolerances. Perform assembly support functions - Sandblast, Strip, Dye Penetrant test, Hydrotest and PMI. Multi-plane tube bending and installation. Adhere to Material Traceability requirements. Paint systems as business requires. Label parts and install nameplates. Conduct peer reviews of completed assemblies. Make proper labor and time reports. Work in a clean and orderly fashion to maintain area standards of 5S. Participate in Lean/Continuous Improvement initiatives. Perform other duties as assigned. Qualifications High school diploma or general education degree (GED) Tube bending experience is required Ability to read and interpret average assembly drawings, make calculations and resolve elementary technical problems. One year related experience and 2 years of On the Job Training or an equivalent combination Must be able to learn to operate overhead cranes and forklift. Must be able to stand for extend periods of time; a minimum of 2 hours. Must be able to maneuver to all areas of the office, shop, or warehouse Must be able to lift and carry up to 35 pounds or utilize team-lift or lifting assistance for items over 35 pounds. Additional Information We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Assembles or fabricates mechanical parts, pieces or products. Utilizes a variety of tools and equipment to assemble units according to required specifications in a specific area. Reads and interpreting blueprints, sketches and written instructions to assemble the parts or products. Identifies faulty components during the assembly process and may be required to test assembled parts or products to ensure functionality Job Duties/Responsibilities Perform work in a professional and safe manner, report unsafe work practices Maintain and build specialty industrial equipment. Assemble and manufacture machinery as per specifications provided by superiors. Assemble and pack items for a specific project according to a packing list provided by superiors. Test completed machinery per guidelines. Assist with building and yard maintenance as needed. Assist with inventory updates. Assist and rebuild machinery returned from projects. Assist/ participate in OTJ Training Other duties as assigned. Skills/Knowledge Good mechanical background. Require ability to operate forklifts and other material moving equipment Ability to follow instructions. Education High School Degree or equivalent. Experience 6+ year of experience. This is a safety sensitive position. About FET FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries. FET is headquartered in Houston, TX with quality manufacturing, efficient distribution, and service facilities conveniently located to support the major energy-producing regions of the world. Forum's products and services range from the underwater reservoir to the refinery, from the sea floor to the above ground transportation line. We pride ourselves on giving you a comprehensive offering of solutions to maximize your operations and improve your bottom line. Our customers are our partners and we work with them to solve their ever-changing challenges. FET is an Equal Opportunity Employer. FET does not discriminate on the basis of race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected under federal, state, or local law. All employment decisions and practices at FET are subject to the foregoing non-discrimination provisions and are based solely on merit, competence, performance, and business needs at the time.