Technologist Trainee jobs at Sherwin-Williams - 53 jobs

This position will be located at the Billings, Montana branch for MGX Equipment Services and reports to the Assistant Service Manager. *Candidates hired for this role will receive a $4,500 sign-on bonus, payable after 90 days continuous service; and be eligible for our Tool Reimbursement Program of up to $1,500 per calendar year ESSENTIAL JOB FUNCTIONS: Under the guidance of the Service Manager and other shop technicians, assumes basic job assignments to learn the responsibilities of a Shop Crane Technician. Helps shop techs perform inspections and repairs. Inspects tools and equipment to ensure they are in working order. Other duties as assigned. JOB REQUIREMENTS: High School Diploma or GED required. Experience as a general laborer or yard worker within the construction or heavy equipment industry preferred. Must have mechanical background and related experience with electrical and hydraulics. Must be a self-starter with the initiative to advance. The ability and desire to provide excellent customer service is essential. Must possess a valid driver's license with a satisfactory driving record. May be required to travel to other locations for cross-training. HEALTH & SAFETY REQUIREMENTS: Perform job functions in a safe manner. Wear all Personal Protective Equipment (P.P.E.) required by Company policy for the job being performed. Know and follow established job specific and facility wide safety and health procedures and rules. Actively participate in safety and health training and demonstrate competency based on training received. Bring safety and health issues, unsafe acts, and safety suggestions to management's attention or correct those you can. WORKING CONDITIONS: This is a full-time position with typical working hours between 7:00 am to 6:00 pm. Overtime and weekend work may be possible based on business conditions. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will be required to work in an environment with exposure to elements such as extreme temperatures and various weather conditions, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. While performing the duties of this job, the employees is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. There is frequent lifting and/or moving of up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color and peripheral vision, depth perception and ability to adjust focus. BENEFITS: Competitive total rewards package including benefits and 401(k) beginning day one of employment. Continuing education and training opportunities; tuition reimbursement for those who qualify. Vacation and Holiday Pay Paid Parental Leave Team building, engagement events, and community involvement Scholarship Program And much more! PAY & TRAINING: This position offers a pay range between $19.00 - $25.00 per hour depending on skills and qualifications for non-bargaining employees. Pay is provided on a bi-weekly basis and there are 14 days in the pay period, beginning on a Monday and ending on a Sunday. A customized training plan and career path is identified for each trainee and provided within the first week of employment, outlining growth and advancement opportunities.

This position will be located at the Belle Chasse, Louisiana branch for MGX Equipment Services and reports to the Service Manager. *Candidates hired for this role will receive a $4,500 sign-on bonus, payable after 90 days continuous service; and be eligible for our Tool Reimbursement Program of up to $1,500 per calendar year ESSENTIAL JOB FUNCTIONS: Under the guidance of the Service Manager and other shop technicians, assumes basic job assignments to learn the responsibilities of a Shop Crane Technician. Helps shop techs perform inspections and repairs. Inspects tools and equipment to ensure they are in working order. Other duties as assigned. JOB REQUIREMENTS: High School Diploma or GED required. Experience as a general laborer or yard worker within the construction or heavy equipment industry preferred. Must have mechanical background and related experience with electrical and hydraulics. Must be a self-starter with the initiative to advance. The ability and desire to provide excellent customer service is essential. Must possess a valid driver's license with a satisfactory driving record. May be required to travel to other locations for cross-training. HEALTH & SAFETY REQUIREMENTS: Perform job functions in a safe manner. Wear all Personal Protective Equipment (P.P.E.) required by Company policy for the job being performed. Know and follow established job specific and facility wide safety and health procedures and rules. Actively participate in safety and health training and demonstrate competency based on training received. Bring safety and health issues, unsafe acts, and safety suggestions to management's attention or correct those you can. WORKING CONDITIONS: This is a full-time position with typical working hours between 7:00 am to 6:00 pm. Overtime and weekend work may be possible based on business conditions. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will be required to work in an environment with exposure to elements such as extreme temperatures and various weather conditions, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. While performing the duties of this job, the employees is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. There is frequent lifting and/or moving of up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color and peripheral vision, depth perception and ability to adjust focus. BENEFITS: Competitive total rewards package including benefits and 401(k) beginning day one of employment. Continuing education and training opportunities; tuition reimbursement for those who qualify. Vacation and Holiday Pay Paid Parental Leave Team building, engagement events, and community involvement Scholarship Program And much more! PAY & TRAINING: This position offers a pay range between $19.00 - $25.00 per hour depending on skills and qualifications for non-bargaining employees. Pay is provided on a bi-weekly basis and there are 14 days in the pay period, beginning on a Monday and ending on a Sunday. A customized training plan and career path is identified for each trainee and provided within the first week of employment, outlining growth and advancement opportunities.

PAPE' MACHINERY, INC. - CONSTRUCTION & FORESTRY DIVISION - GILROY, CA TECHNICIAN TRAINEE: Do you love turning wrenches? Are you looking to further establish your career as a Technician? As the premier capital equipment dealer in the West, Pape' Machinery is ready to hire motivated Technician Trainees to their team. All levels of experience are accepted! At Pape', you can count on us to invest heavily in your Technician career through training, resources, and support. We want to see you grow your skill set and experience, and in turn, provide excellent compensation, work-life balance, and benefits for you and your family. Come join our team! WHAT YOU WILL DO: In the Technician Trainee role, you will be a part of our "Learn while you Earn" apprenticeship program. Every day you will work on heavy equipment under the guidance of senior technicians, all while you continue building your skills, knowledge, and experience as a Technician. To thrive in this job, you must be a self-starter, a team player, and be willing to learn. WHAT YOU NEED: * One or more years of experience working on equipment OR an Associate Degree or Certificate in Auto/Diesel Technology is preferred. * Must have a starter set of general tools. * Must be able to operate a lift truck and other heavy equipment - We will train you! Compensation: $33.80-49.35/hr (Depending on Experience) (This position is covered by a collective bargaining agreement) Why work for Pape': * Competitive pay based on your skills, training and experience level. * Great benefits including healthcare and pension. * Advancement - Pape' is a dynamic, growth oriented organization with a focus on promoting from within. * Stability and reputation - Pape' is a family-owned, fourth-generation company with over 160 locations, over 4,500 members and 85 plus years of experience. Pape' is known for their stability, honesty and integrity. * Equipment - We have the largest equipment inventory in the West and an unparalleled parts inventory! * Employee impact - Enjoy an open-door policy where your voice will be heard and your opinions will matter. * Training - You will be provided with training and mentoring to prepare you for your role and continued learning to grow your skills. The Pape' Group maintains a drug-free workplace and as such, requires candidates to successfully pass a pre-employment drug test.

This position will be located at the Houston, Texas branch for MGX Equipment Services and reports to the Service Manager. *Candidates hired for this role will receive a $4,500 sign-on bonus, payable after 90 days continuous service; and be eligible for our Tool Reimbursement Program of up to $1,500 per calendar year ESSENTIAL JOB FUNCTIONS: Under the guidance of the Service Manager and other shop technicians, assumes basic job assignments to learn the responsibilities of a Shop Crane Technician. Helps shop techs perform inspections and repairs. Inspects tools and equipment to ensure they are in working order. Other duties as assigned. JOB REQUIREMENTS: High School Diploma or GED required. Experience as a general laborer or yard worker within the construction or heavy equipment industry preferred. Must have mechanical background and related experience with electrical and hydraulics. Must be a self-starter with the initiative to advance. The ability and desire to provide excellent customer service is essential. Must possess a valid driver's license with a satisfactory driving record. May be required to travel to other locations for cross-training. HEALTH & SAFETY REQUIREMENTS: Perform job functions in a safe manner. Wear all Personal Protective Equipment (P.P.E.) required by Company policy for the job being performed. Know and follow established job specific and facility wide safety and health procedures and rules. Actively participate in safety and health training and demonstrate competency based on training received. Bring safety and health issues, unsafe acts, and safety suggestions to management's attention or correct those you can. WORKING CONDITIONS: This is a full-time position with typical working hours between 7:00 am to 6:00 pm. Overtime and weekend work may be possible based on business conditions. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will be required to work in an environment with exposure to elements such as extreme temperatures and various weather conditions, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. While performing the duties of this job, the employees is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. There is frequent lifting and/or moving of up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color and peripheral vision, depth perception and ability to adjust focus. BENEFITS: Competitive total rewards package including benefits and 401(k) beginning day one of employment. Continuing education and training opportunities; tuition reimbursement for those who qualify. Vacation and Holiday Pay Paid Parental Leave Team building, engagement events, and community involvement Scholarship Program And much more! PAY & TRAINING: This position offers a pay range between $19.00 - $25.00 per hour depending on skills and qualifications for non-bargaining employees. Pay is provided on a bi-weekly basis and there are 14 days in the pay period, beginning on a Monday and ending on a Sunday. A customized training plan and career path is identified for each trainee and provided within the first week of employment, outlining growth and advancement opportunities.

ABOUT THE ORGANIZATION Sun Chemical, a member of the DIC Group, is a leading producer of packaging and graphic solutions, color and display technologies, functional products, electronic materials, and products for the automotive and healthcare industries. Together with DIC, Sun Chemical is continuously working to promote and develop sustainable solutions to exceed customer expectations and better the world around us. With combined annual sales of more than $8.5 billion and 22,000+ employees worldwide, the DIC Group companies support a diverse collection of global customers. Sun Chemical Corporation is a subsidiary of Sun Chemical Group Coöperatief U.A., the Netherlands, and is headquartered in Parsippany, New Jersey, U.S.A. For more information, please visit our website at ******************* or connect with us on LinkedIn or Twitter Job Title: Ink Inplant Tech Trainee Location: Newton, NC Third Shift: 4:00pm - 12:00am Pay: Based on experience OVERVIEW: With support moving towards minimal supervision, provide color matching and small batch blending support on-site at the customer location. ESSENTIAL JOB FUNCTIONS: Produce and quality control inks to ensure inks meet or exceed the customer's specifications. Maintain detailed production and QC records. With support, identifies rework opportunities based on review of batch tickets. Maintain housekeeping and safe operations Must be able to lift up to 50 lb. buckets; and move 500 lb. drums following standard procedures. REQUIRED EDUCATION AND EXPERIENCE: High School Diploma or GED This is a customer-facing position that requires a high degree of interpersonal skill. Knowledge of MS Word/Excel. Capable of lifting 50 lbs. throughout the day Able to stand for long periods of time BENEFITS We offer a range of market-competitive total rewards that include merit increases, paid holidays, Paid Time Off, medical, dental, vision, short and long term disability benefits, 401(k)+match and life insurance. Eligibility of benefit timing may vary. EQUAL EMPLOYMENT OPPORTUNITY It is Sun's policy that applicants for employment are recruited, selected, and hired on the basis of individual merit and ability with respect to the position being filled. Sun prohibits discrimination on the basis of race, color, religion, creed, national origin, age, gender, sexual orientation, gender identity, marital or veteran status, disability, or any other status protected by applicable law. Employment agencies are an important component of our talent acquisition strategy, and we value the partnerships we have built with our preferred vendors. We will not accept unsolicited resumes from employment agencies for any employment opportunity. All resumes submitted by search firms to any employee at Sun Chemical or directly to hiring managers in any form without a signed contract on file, and search engagement for that position, will be deemed unsolicited in nature, and no fee will be paid in the event the candidate is hired as a result of the referral or through other means. Additionally, any resume submitted without a contract in place will be considered property of Sun Chemical and no fees will be paid to the agency if the candidate is hired. #ID23

This position will be located at the Baton Rouge branch for MGX Equipment Services and reports to the Service Manager. *Candidates hired for this role will receive a $4,500 sign-on bonus, payable after 90 days continuous service; and be eligible for our Tool Reimbursement Program of up to $1,500 per calendar year ESSENTIAL JOB FUNCTIONS: Under the guidance of the Service Manager and other shop technicians, assumes basic job assignments to learn the responsibilities of a Shop Crane Technician. Helps shop techs perform inspections and repairs. Inspects tools and equipment to ensure they are in working order. Other duties as assigned. JOB REQUIREMENTS: High School Diploma or GED required. Experience as a general laborer or yard worker within the construction or heavy equipment industry preferred. Must have mechanical background and related experience with electrical and hydraulics. Must be a self-starter with the initiative to advance. The ability and desire to provide excellent customer service is essential. Must possess a valid driver's license with a satisfactory driving record. May be required to travel to other locations for cross-training. HEALTH & SAFETY REQUIREMENTS: Perform job functions in a safe manner. Wear all Personal Protective Equipment (P.P.E.) required by Company policy for the job being performed. Know and follow established job specific and facility wide safety and health procedures and rules. Actively participate in safety and health training and demonstrate competency based on training received. Bring safety and health issues, unsafe acts, and safety suggestions to management's attention or correct those you can. WORKING CONDITIONS: This is a full-time position with typical working hours between 7:00 am to 6:00 pm. Overtime and weekend work may be possible based on business conditions. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will be required to work in an environment with exposure to elements such as extreme temperatures and various weather conditions, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. While performing the duties of this job, the employees is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. There is frequent lifting and/or moving of up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color and peripheral vision, depth perception and ability to adjust focus. BENEFITS: Competitive total rewards package including benefits and 401(k) beginning day one of employment. Continuing education and training opportunities; tuition reimbursement for those who qualify. Vacation and Holiday Pay Paid Parental Leave Team building, engagement events, and community involvement Scholarship Program And much more! PAY & TRAINING: This position offers a pay range between $19.00 - $25.00 per hour depending on skills and qualifications for non-bargaining employees. Pay is provided on a bi-weekly basis and there are 14 days in the pay period, beginning on a Monday and ending on a Sunday. A customized training plan and career path is identified for each trainee and provided within the first week of employment, outlining growth and advancement opportunities.

This position will be located at the Bloomington MN, branch for MGX Equipment Services and reports to the Service Manager. *Candidates hired for this role will receive a $4,500 sign-on bonus, payable after 90 days continuous service; and be eligible for our Tool Reimbursement Program of up to $1,500 per calendar year ESSENTIAL JOB FUNCTIONS: Under the guidance of the Service Manager and other shop technicians, assumes basic job assignments to learn the responsibilities of a Shop Crane Technician. Helps shop techs perform inspections and repairs. Inspects tools and equipment to ensure they are in working order. Other duties as assigned. JOB REQUIREMENTS: High School Diploma or GED required. Experience as a general laborer or yard worker within the construction or heavy equipment industry preferred. Must have mechanical background and related experience with electrical and hydraulics. Must be a self-starter with the initiative to advance. The ability and desire to provide excellent customer service is essential. Must possess a valid driver's license with a satisfactory driving record. May be required to travel to other locations for cross-training. HEALTH & SAFETY REQUIREMENTS: Perform job functions in a safe manner. Wear all Personal Protective Equipment (P.P.E.) required by Company policy for the job being performed. Know and follow established job specific and facility wide safety and health procedures and rules. Actively participate in safety and health training and demonstrate competency based on training received. Bring safety and health issues, unsafe acts, and safety suggestions to management's attention or correct those you can. WORKING CONDITIONS: This is a full-time position with typical working hours between 7:00 am to 6:00 pm. Overtime and weekend work may be possible based on business conditions. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will be required to work in an environment with exposure to elements such as extreme temperatures and various weather conditions, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. While performing the duties of this job, the employees is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. There is frequent lifting and/or moving of up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color and peripheral vision, depth perception and ability to adjust focus. BENEFITS: Competitive total rewards package including benefits and 401(k) beginning day one of employment. Continuing education and training opportunities; tuition reimbursement for those who qualify. Vacation and Holiday Pay Paid Parental Leave Team building, engagement events, and community involvement Scholarship Program And much more! PAY & TRAINING: This position offers a pay range between $19.00 - $25.00 per hour depending on skills and qualifications for non-bargaining employees. Pay is provided on a bi-weekly basis and there are 14 days in the pay period, beginning on a Monday and ending on a Sunday. A customized training plan and career path is identified for each trainee and provided within the first week of employment, outlining growth and advancement opportunities.

ABOUT THE ORGANIZATION Sun Chemical, a member of the DIC Group, is a leading producer of packaging and graphic solutions, color and display technologies, functional products, electronic materials, and products for the automotive and healthcare industries. Together with DIC, Sun Chemical is continuously working to promote and develop sustainable solutions to exceed customer expectations and better the world around us. With combined annual sales of more than $8.5 billion and 22,000+ employees worldwide, the DIC Group companies support a diverse collection of global customers. Sun Chemical Corporation is a subsidiary of Sun Chemical Group Coöperatief U.A., the Netherlands, and is headquartered in Parsippany, New Jersey, U.S.A. For more information, please visit our website at ******************* or connect with us on LinkedIn or Twitter Job Title: Ink Inplant Tech Trainee Location: Stone Mountain, GA Second Shift: 4:00pm - 12:00am Pay: Based on experience OVERVIEW: With support moving towards minimal supervision, provide color matching and small batch blending support on-site at the customer location. ESSENTIAL JOB FUNCTIONS: Produce and quality control inks to ensure inks meet or exceed the customer's specifications. Maintain detailed production and QC records. With support, identifies rework opportunities based on review of batch tickets. Maintain housekeeping and safe operations Must be able to lift up to 50 lb. buckets; and move 500 lb. drums following standard procedures. REQUIRED EDUCATION AND EXPERIENCE: High School Diploma or GED This is a customer-facing position that requires a high degree of interpersonal skill. Knowledge of MS Word/Excel. Capable of lifting 50 lbs. throughout the day Able to stand for long periods of time BENEFITS We offer a range of market-competitive total rewards that include merit increases, paid holidays, Paid Time Off, medical, dental, vision, short and long term disability benefits, 401(k)+match and life insurance. Eligibility of benefit timing may vary. EQUAL EMPLOYMENT OPPORTUNITY It is Sun's policy that applicants for employment are recruited, selected, and hired on the basis of individual merit and ability with respect to the position being filled. Sun prohibits discrimination on the basis of race, color, religion, creed, national origin, age, gender, sexual orientation, gender identity, marital or veteran status, disability, or any other status protected by applicable law. Employment agencies are an important component of our talent acquisition strategy, and we value the partnerships we have built with our preferred vendors. We will not accept unsolicited resumes from employment agencies for any employment opportunity. All resumes submitted by search firms to any employee at Sun Chemical or directly to hiring managers in any form without a signed contract on file, and search engagement for that position, will be deemed unsolicited in nature, and no fee will be paid in the event the candidate is hired as a result of the referral or through other means. Additionally, any resume submitted without a contract in place will be considered property of Sun Chemical and no fees will be paid to the agency if the candidate is hired. #ID23

The Shop Crane Tech Trainee is responsible for assisting the shop with various assigned duties. This position will be located at the Denver, CO branch for MGX Equipment Services and reports to the Service Manager. *Candidates hired for this role will receive a $4,500 sign-on bonus, payable after 90 days continuous service; and be eligible for our Tool Reimbursement Program of up to $1,500 per calendar year. Relocation assistance may also be available to those who qualify. ESSENTIAL JOB FUNCTIONS: Under the guidance of the Service Manager and other shop technicians, assumes basic job assignments to learn the responsibilities of a Shop Crane Technician. Helps shop techs perform inspections and repairs. Inspects tools and equipment to ensure they are in working order. Other duties as assigned. JOB REQUIREMENTS: High School Diploma or GED required. Experience as a general laborer or yard worker within the construction or heavy equipment industry preferred. Must have mechanical background and related experience with electrical and hydraulics. Must be a self-starter with the initiative to advance. The ability and desire to provide excellent customer service is essential. Must possess a valid driver's license with a satisfactory driving record. May be required to travel to other locations for cross-training. HEALTH & SAFETY REQUIREMENTS: Perform job functions in a safe manner. Wear all Personal Protective Equipment (P.P.E.) required by Company policy for the job being performed. Know and follow established job specific and facility wide safety and health procedures and rules. Actively participate in safety and health training and demonstrate competency based on training received. Bring safety and health issues, unsafe acts, and safety suggestions to management's attention or correct those you can. WORKING CONDITIONS: This is a full-time position with typical working hours between 7:00 am to 4:00 pm. Overtime and weekend work may be possible based on business conditions. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will be required to work in an environment with exposure to elements such as extreme temperatures and various weather conditions, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. While performing the duties of this job, the employees is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. There is frequent lifting and/or moving of up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color and peripheral vision, depth perception and ability to adjust focus. BENEFITS: Competitive total rewards package including benefits and 401(k) beginning day one of employment. Continuing education and training opportunities; tuition reimbursement for those who qualify. Vacation and Holiday Pay Paid Parental Leave Team building, engagement events, and community involvement Scholarship Program And much more! PAY & TRAINING: This position offers a pay range between $19.00 - $25.00 per hour depending on skills and qualifications for non-bargaining employees. Pay is provided on a bi-weekly basis and there are 14 days in the pay period, beginning on a Monday and ending on a Sunday. A customized training plan and career path is identified for each trainee and provided within the first week of employment, outlining growth and advancement opportunities.

This position will be located at the Phoenix, Arizona branch for MGX Equipment Services and reports to the Service Manager. *Candidates hired for this role will receive a $4,500 sign-on bonus, payable after 90 days continuous service; and be eligible for our Tool Reimbursement Program of up to $1,500 per calendar year ESSENTIAL JOB FUNCTIONS: Under the guidance of the Service Manager and other shop technicians, assumes basic job assignments to learn the responsibilities of a Shop Crane Technician. Helps shop techs perform inspections and repairs. Inspects tools and equipment to ensure they are in working order. Other duties as assigned. JOB REQUIREMENTS: High School Diploma or GED required. Experience as a general laborer or yard worker within the construction or heavy equipment industry preferred. Must have mechanical background and related experience with electrical and hydraulics. Must be a self-starter with the initiative to advance. The ability and desire to provide excellent customer service is essential. Must possess a valid driver's license with a satisfactory driving record. May be required to travel to other locations for cross-training. HEALTH & SAFETY REQUIREMENTS: Perform job functions in a safe manner. Wear all Personal Protective Equipment (P.P.E.) required by Company policy for the job being performed. Know and follow established job specific and facility wide safety and health procedures and rules. Actively participate in safety and health training and demonstrate competency based on training received. Bring safety and health issues, unsafe acts, and safety suggestions to management's attention or correct those you can. WORKING CONDITIONS: This is a full-time position with typical working hours between 7:00 am to 6:00 pm. Overtime and weekend work may be possible based on business conditions. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will be required to work in an environment with exposure to elements such as extreme temperatures and various weather conditions, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. While performing the duties of this job, the employees is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. There is frequent lifting and/or moving of up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color and peripheral vision, depth perception and ability to adjust focus. BENEFITS: Competitive total rewards package including benefits and 401(k) beginning day one of employment. Continuing education and training opportunities; tuition reimbursement for those who qualify. Vacation and Holiday Pay Paid Parental Leave Team building, engagement events, and community involvement Scholarship Program And much more! PAY & TRAINING: This position offers a pay range between $19.00 - $25.00 per hour depending on skills and qualifications for non-bargaining employees. Pay is provided on a bi-weekly basis and there are 14 days in the pay period, beginning on a Monday and ending on a Sunday. A customized training plan and career path is identified for each trainee and provided within the first week of employment, outlining growth and advancement opportunities.

This position will be located at the Winston Salem, North Carolina branch for MGX Equipment Services and reports to the Service Manager. *Candidates hired for this role will receive a $4,500 sign-on bonus, payable after 90 days continuous service; and be eligible for our Tool Reimbursement Program of up to $1,500 per calendar year ESSENTIAL JOB FUNCTIONS: Under the guidance of the Service Manager and other shop technicians, assumes basic job assignments to learn the responsibilities of a Shop Crane Technician. Helps shop techs perform inspections and repairs. Inspects tools and equipment to ensure they are in working order. Other duties as assigned. JOB REQUIREMENTS: High School Diploma or GED required. Experience as a general laborer or yard worker within the construction or heavy equipment industry preferred. Must have mechanical background and related experience with electrical and hydraulics. Must be a self-starter with the initiative to advance. The ability and desire to provide excellent customer service is essential. Must possess a valid driver's license with a satisfactory driving record. May be required to travel to other locations for cross-training. HEALTH & SAFETY REQUIREMENTS: Perform job functions in a safe manner. Wear all Personal Protective Equipment (P.P.E.) required by Company policy for the job being performed. Know and follow established job specific and facility wide safety and health procedures and rules. Actively participate in safety and health training and demonstrate competency based on training received. Bring safety and health issues, unsafe acts, and safety suggestions to management's attention or correct those you can. WORKING CONDITIONS: This is a full-time position with typical working hours between 7:00 am to 6:00 pm. Overtime and weekend work may be possible based on business conditions. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will be required to work in an environment with exposure to elements such as extreme temperatures and various weather conditions, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. While performing the duties of this job, the employees is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. There is frequent lifting and/or moving of up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color and peripheral vision, depth perception and ability to adjust focus. BENEFITS: Competitive total rewards package including benefits and 401(k) beginning day one of employment. Continuing education and training opportunities; tuition reimbursement for those who qualify. Vacation and Holiday Pay Paid Parental Leave Team building, engagement events, and community involvement Scholarship Program And much more! PAY & TRAINING: This position offers a pay range between $19.00 - $25.00 per hour depending on skills and qualifications for non-bargaining employees. Pay is provided on a bi-weekly basis and there are 14 days in the pay period, beginning on a Monday and ending on a Sunday. A customized training plan and career path is identified for each trainee and provided within the first week of employment, outlining growth and advancement opportunities.

PAPE' MACHINERY, INC. - CONSTRUCTION & FORESTRY DIVISION - FREMONT, CA TECHNICIAN TRAINEE: Do you love turning wrenches? Are you looking to further establish your career as a Technician? As the premier capital equipment dealer in the West, Pape' Machinery is ready to hire motivated Technician Trainees to their team. All levels of experience are accepted! At Pape', you can count on us to invest heavily in your Technician career through training, resources, and support. We want to see you grow your skill set and experience, and in turn, provide excellent compensation, work-life balance, and benefits for you and your family. Come join our team! WHAT YOU WILL DO: In the Technician Trainee role, you will be a part of our "Learn while you Earn" apprenticeship program. Every day you will work on heavy equipment under the guidance of senior technicians, all while you continue building your skills, knowledge, and experience as a Technician. To thrive in this job, you must be a self-starter, a team player, and be willing to learn. WHAT YOU NEED: * One or more years of experience working on equipment OR an Associate Degree or Certificate in Auto/Diesel Technology is preferred. * Must have a starter set of general tools. * Must be able to operate a lift truck and other heavy equipment - We will train you! Compensation: $33.80 - 51.21/hr (Depending on Experience) (This position is covered by a collective bargaining agreement) Why work for Pape': * Competitive pay based on your skills, training and experience level. * Great benefits including healthcare and pension. * Advancement - Pape' is a dynamic, growth oriented organization with a focus on promoting from within. * Stability and reputation - Pape' is a family-owned, fourth-generation company with over 160 locations, over 4,500 members and 85 plus years of experience. Pape' is known for their stability, honesty and integrity. * Equipment - We have the largest equipment inventory in the West and an unparalleled parts inventory! * Employee impact - Enjoy an open-door policy where your voice will be heard and your opinions will matter. * Training - You will be provided with training and mentoring to prepare you for your role and continued learning to grow your skills. The Pape' Group maintains a drug-free workplace and as such, requires candidates to successfully pass a pre-employment drug test.

The Shop Crane Tech Trainee is responsible for assisting the shop with various assigned duties. This position reports to the Service Manager. MGX Equipment Services has multiple openings at our branches across the U.S., including but not limited to: Baltimore, MD Norfolk, VA Nashville, TN Baton Rouge, LA Belle Chasse, LA Winston-Salem, NC Aiken, SC Denver, CO Dallas, TX Houston, TX Phoenix, AZ Salt Lake City, UT Billings, MT *Candidates hired for this role will receive a $4,500 sign-on bonus, payable after 90 days continuous service; and be eligible for our Tool Reimbursement Program of up to $1,500 per calendar year. Relocation assistance may also be available to those who qualify. ESSENTIAL JOB FUNCTIONS: Under the guidance of the Service Manager and other shop technicians, assumes basic job assignments to learn the responsibilities of a Shop Crane Technician. Helps shop techs perform inspections and repairs. Inspects tools and equipment to ensure they are in working order. Other duties as assigned. JOB REQUIREMENTS: High School Diploma or GED required. Experience as a general laborer or yard worker within the construction or heavy equipment industry preferred. Must have mechanical background and related experience with electrical and hydraulics. Must be a self-starter with the initiative to advance. The ability and desire to provide excellent customer service is essential. Must possess a valid driver's license with a satisfactory driving record. May be required to travel to other locations for cross-training. HEALTH & SAFETY REQUIREMENTS: Perform job functions in a safe manner. Wear all Personal Protective Equipment (P.P.E.) required by Company policy for the job being performed. Know and follow established job specific and facility wide safety and health procedures and rules. Actively participate in safety and health training and demonstrate competency based on training received. Bring safety and health issues, unsafe acts, and safety suggestions to management's attention or correct those you can. WORKING CONDITIONS: This is a full-time position with typical working hours between 7:00 am to 4:00 pm. Overtime and weekend work may be possible based on business conditions. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will be required to work in an environment with exposure to elements such as extreme temperatures and various weather conditions, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. While performing the duties of this job, the employees is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. There is frequent lifting and/or moving of up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color and peripheral vision, depth perception and ability to adjust focus. BENEFITS: Competitive total rewards package including benefits and 401(k) beginning day one of employment. Continuing education and training opportunities; tuition reimbursement for those who qualify. Vacation and Holiday Pay Paid Parental Leave Team building, engagement events, and community involvement Scholarship Program And much more!

This position will be located at the Aiken, SC branch for MGX Equipment Services and reports to the Branch Manager. *Candidates hired for this role will receive a $4,500 sign-on bonus, payable after 90 days continuous service; and be eligible for our Tool Reimbursement Program of up to $1,500 per calendar year ESSENTIAL JOB FUNCTIONS: Under the guidance of the Service Manager and other shop technicians, assumes basic job assignments to learn the responsibilities of a Shop Crane Technician. Helps shop techs perform inspections and repairs. Inspects tools and equipment to ensure they are in working order. Other duties as assigned. JOB REQUIREMENTS: High School Diploma or GED required. Experience as a general laborer or yard worker within the construction or heavy equipment industry preferred. Must have mechanical background and related experience with electrical and hydraulics. Must be a self-starter with the initiative to advance. The ability and desire to provide excellent customer service is essential. Must possess a valid driver's license with a satisfactory driving record. May be required to travel to other locations for cross-training. HEALTH & SAFETY REQUIREMENTS: Perform job functions in a safe manner. Wear all Personal Protective Equipment (P.P.E.) required by Company policy for the job being performed. Know and follow established job specific and facility wide safety and health procedures and rules. Actively participate in safety and health training and demonstrate competency based on training received. Bring safety and health issues, unsafe acts, and safety suggestions to management's attention or correct those you can. WORKING CONDITIONS: This is a full-time position with typical working hours between 7:00 am to 4:00 pm. Overtime and weekend work may be possible based on business conditions. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will be required to work in an environment with exposure to elements such as extreme temperatures and various weather conditions, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. While performing the duties of this job, the employees is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. There is frequent lifting and/or moving of up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color and peripheral vision, depth perception and ability to adjust focus. BENEFITS: Competitive total rewards package including benefits and 401(k) beginning day one of employment. Continuing education and training opportunities; tuition reimbursement for those who qualify. Vacation and Holiday Pay Paid Parental Leave Team building, engagement events, and community involvement Scholarship Program And much more! PAY & TRAINING: This position offers a pay range between $19.00 - $25.00 per hour depending on skills and qualifications for non-bargaining employees. Pay is provided on a bi-weekly basis and there are 14 days in the pay period, beginning on a Monday and ending on a Sunday. A customized training plan and career path is identified for each trainee and provided within the first week of employment, outlining growth and advancement opportunities.

PAPE' MACHINERY, INC. - CONSTRUCTION & FORESTRY DIVISION - ROHNERT PARK, CA TECHNICIAN TRAINEE: Do you love turning wrenches? Are you looking to further establish your career as a Technician? As the premier capital equipment dealer in the West, Pape' Machinery is ready to hire motivated Technician Trainees to their team. All levels of experience are accepted! At Pape', you can count on us to invest heavily in your Technician career through training, resources, and support. We want to see you grow your skill set and experience, and in turn, provide excellent compensation, work-life balance, and benefits for you and your family. Come join our team! WHAT YOU WILL DO: In the Technician Trainee role, you will be a part of our "Learn while you Earn" apprenticeship program. Every day you will work on heavy equipment under the guidance of senior technicians, all while you continue building your skills, knowledge, and experience as a Technician. To thrive in this job, you must be a self-starter, a team player, and be willing to learn. WHAT YOU NEED: * One or more years of experience working on equipment OR an Associate Degree or Certificate in Auto/Diesel Technology is preferred. * Must have a starter set of general tools. * Must be able to operate a lift truck and other heavy equipment - We will train you! Compensation: $33.80-48.87/hr (Depending on Experience) (This position is covered by a collective bargaining agreement) Why work for Pape': * Competitive pay based on your skills, training and experience level. * Great benefits including healthcare and pension. * Advancement - Pape' is a dynamic, growth oriented organization with a focus on promoting from within. * Stability and reputation - Pape' is a family-owned, fourth-generation company with over 160 locations, over 4,500 members and 85 plus years of experience. Pape' is known for their stability, honesty and integrity. * Equipment - We have the largest equipment inventory in the West and an unparalleled parts inventory! * Employee impact - Enjoy an open-door policy where your voice will be heard and your opinions will matter. * Training - You will be provided with training and mentoring to prepare you for your role and continued learning to grow your skills. The Pape' Group maintains a drug-free workplace and as such, requires candidates to successfully pass a pre-employment drug test.

Job Title: Plaster Technician Job Status: Full Time Department: Manufacturing Reports To: Value Stream Manager FLSA Status: Non-exempt Travel Requirements: None Work Schedule: M-F with some weekends Location: Hayden, ID POSITION SUMMARY: The Plaster Technician completes the production of assigned Plaster tools utilizing the appropriate molds. The successful candidate will ensure that products are produced on time, safely, and meet or exceed quality standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: Review resident manufacturing plan for proper instructions and specifications Ensure all necessary parts and materials are present Perform cycle cleaning of compression molder and tools. Perform machine changeover/setup of different part tools. Complete pressing of part per the manufacturing plan Inspect each step in the process for quality and presence of Foreign Object Debris (FOD) Visually inspect finished parts for quality Clean part per specifications Bag part per specifications Place part on outgoing production shelves Participate in continuous improvement activities through implementation of change management process and best practices Assist with standard operating procedures for all production operations Maintain a clean and organized work area Replace all tools and materials when job(s) are complete Properly dispose of any/all hazardous materials Ensure all health and safety guidelines are followed Utilize all mandatory personal protective equipment (PPE) Other duties as assigned Qualifications POSITION QUALIFICATIONS: Demonstrated success in production within a fast-paced, technically focused environment is essential. Must be results-oriented and demonstrate analytical thinking, innovation, flexibility in dealing with changing and ambiguous situations. Demonstrated success working in a highly collaborative multi-function environment. Demonstrated the ability to operate the 40-ton compression molder and perform basic troubleshooting. Demonstrated strong commitment to safety and adherence to safety protocols, with the ability to identify hazards and promote a safe working environment in high-risk settings. COMPETENCIES: Initiative / Problem Solving - Must be willing to identify existing or potential problem areas. Expected to determine, evaluate, and suggest appropriate courses of action and implement effective solutions. Interested in seeking ways to improve processes. Weigh consequences before making a final decision. Recognize issues and determines actions needed to advance the decision-making processes. Teamwork / Relationship Building - Must be able to develop and maintain positive working relationships with co-workers, leaders, subordinates, and outside contacts. Build trust by respecting the ideas and contributions of everyone. Behave in suitable and appropriate ways; pleasant and congenial; contributes to positive morale and spirit within the team; and embraces diverse and global cultures and ideas. Able to transmit information in a respectful, diplomatic, and mature manner to all. Safety - Demonstrates a commitment to safety by following safety rules & guidelines; follows good housekeeping practices, takes proper care of equipment. Meets requirements of 100% participation in safety training & 100% safety actions completed. Job Knowledge - Demonstrate skills and knowledge relevant to function and work group. Apply best practices and stay up to date on developments in discipline. Proficient in all job requirements. Knows best tools and means for efficient accomplishment of objectives. Takes the time to ensure accuracy of work. High standards for quality and does not allow errors or mistakes. Delivering Results - Strives to achieve excellence in all tasks and goals. Maintains focus and preserves in the face of obstacles. Uses time efficiently and responds quickly and constructively when confronted with challenges. Accurately prioritizes tasks. Delivers on deadlines. Continuous Improvement - Actively participates in lean manufacturing initiatives such as 5S, Kaizen Events, RCCA, and Value Stream Analysis. Demonstrates enthusiasm and positivity for improving processes and their work environment. Initiates improvement without the need for constant supervision. EDUCATION and/or EXPERIENCE: Education: High school diploma or general education degree (GED) required. Experience: Minimum 6 months' previous work experience, forklift certification a plus PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to talk or hear, reach with hands and arms, stand, walk, push, and pull. The employee is regularly required to perform repetitive motions. The employee is frequently required to push, pull, and/or lift up to 30 pounds, and occasionally push, pull, and/or lift up to 100 pounds. The employee is required to have visual acuity to perform an activity where the job is at or within arm's reach. The employee will be required to operate and move a hoist and operate power tools. WORK ENVIRONMENT: While performing the duties of this job, the employee is occasionally exposed to humid conditions; moving mechanical parts; fumes or airborne particles. Will be required to wear protective gear and follow proper safety precautions. The noise level in the work environment is usually moderate but can be loud at times. Unitech Composites is an equal opportunity employer.

Job Title: Plaster Technician Job Status: Full Time Department: Manufacturing Reports To: Value Stream Manager FLSA Status: Non-exempt Travel Requirements: None Work Schedule: M-F with some weekends Location: Hayden, ID POSITION SUMMARY: The Plaster Technician completes the production of assigned Plaster tools utilizing the appropriate molds. The successful candidate will ensure that products are produced on time, safely, and meet or exceed quality standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: Review resident manufacturing plan for proper instructions and specifications Ensure all necessary parts and materials are present Perform cycle cleaning of compression molder and tools. Perform machine changeover/setup of different part tools. Complete pressing of part per the manufacturing plan Inspect each step in the process for quality and presence of Foreign Object Debris (FOD) Visually inspect finished parts for quality Clean part per specifications Bag part per specifications Place part on outgoing production shelves Participate in continuous improvement activities through implementation of change management process and best practices Assist with standard operating procedures for all production operations Maintain a clean and organized work area Replace all tools and materials when job(s) are complete Properly dispose of any/all hazardous materials Ensure all health and safety guidelines are followed Utilize all mandatory personal protective equipment (PPE) Other duties as assigned Qualifications POSITION QUALIFICATIONS: Demonstrated success in production within a fast-paced, technically focused environment is essential. Must be results-oriented and demonstrate analytical thinking, innovation, flexibility in dealing with changing and ambiguous situations. Demonstrated success working in a highly collaborative multi-function environment. Demonstrated the ability to operate the 40-ton compression molder and perform basic troubleshooting. Demonstrated strong commitment to safety and adherence to safety protocols, with the ability to identify hazards and promote a safe working environment in high-risk settings. COMPETENCIES: Initiative / Problem Solving - Must be willing to identify existing or potential problem areas. Expected to determine, evaluate, and suggest appropriate courses of action and implement effective solutions. Interested in seeking ways to improve processes. Weigh consequences before making a final decision. Recognize issues and determines actions needed to advance the decision-making processes. Teamwork / Relationship Building - Must be able to develop and maintain positive working relationships with co-workers, leaders, subordinates, and outside contacts. Build trust by respecting the ideas and contributions of everyone. Behave in suitable and appropriate ways; pleasant and congenial; contributes to positive morale and spirit within the team; and embraces diverse and global cultures and ideas. Able to transmit information in a respectful, diplomatic, and mature manner to all. Safety - Demonstrates a commitment to safety by following safety rules & guidelines; follows good housekeeping practices, takes proper care of equipment. Meets requirements of 100% participation in safety training & 100% safety actions completed. Job Knowledge - Demonstrate skills and knowledge relevant to function and work group. Apply best practices and stay up to date on developments in discipline. Proficient in all job requirements. Knows best tools and means for efficient accomplishment of objectives. Takes the time to ensure accuracy of work. High standards for quality and does not allow errors or mistakes. Delivering Results - Strives to achieve excellence in all tasks and goals. Maintains focus and preserves in the face of obstacles. Uses time efficiently and responds quickly and constructively when confronted with challenges. Accurately prioritizes tasks. Delivers on deadlines. Continuous Improvement - Actively participates in lean manufacturing initiatives such as 5S, Kaizen Events, RCCA, and Value Stream Analysis. Demonstrates enthusiasm and positivity for improving processes and their work environment. Initiates improvement without the need for constant supervision. EDUCATION and/or EXPERIENCE: Education: High school diploma or general education degree (GED) required. Experience: Minimum 6 months' previous work experience, forklift certification a plus PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is frequently required to talk or hear, reach with hands and arms, stand, walk, push, and pull. The employee is regularly required to perform repetitive motions. The employee is frequently required to push, pull, and/or lift up to 30 pounds, and occasionally push, pull, and/or lift up to 100 pounds. The employee is required to have visual acuity to perform an activity where the job is at or within arm's reach. The employee will be required to operate and move a hoist and operate power tools. WORK ENVIRONMENT: While performing the duties of this job, the employee is occasionally exposed to humid conditions; moving mechanical parts; fumes or airborne particles. Will be required to wear protective gear and follow proper safety precautions. The noise level in the work environment is usually moderate but can be loud at times. Unitech Composites is an equal opportunity employer.

This position will be located at the Baltimore, Maryland branch for MGX Equipment Services and reports to the Service Manager. *Candidates hired for this role will receive a $4,500 sign-on bonus, payable after 90 days continuous service; and be eligible for our Tool Reimbursement Program of up to $1,500 per calendar year ESSENTIAL JOB FUNCTIONS: Under the guidance of the Service Manager and other shop technicians, assumes basic job assignments to learn the responsibilities of a Shop Crane Technician. Helps shop techs perform inspections and repairs. Inspects tools and equipment to ensure they are in working order. Other duties as assigned. JOB REQUIREMENTS: High School Diploma or GED required. Experience as a general laborer or yard worker within the construction or heavy equipment industry preferred. Must have mechanical background and related experience with electrical and hydraulics. Must be a self-starter with the initiative to advance. The ability and desire to provide excellent customer service is essential. Must possess a valid driver's license with a satisfactory driving record. May be required to travel to other locations for cross-training. HEALTH & SAFETY REQUIREMENTS: Perform job functions in a safe manner. Wear all Personal Protective Equipment (P.P.E.) required by Company policy for the job being performed. Know and follow established job specific and facility wide safety and health procedures and rules. Actively participate in safety and health training and demonstrate competency based on training received. Bring safety and health issues, unsafe acts, and safety suggestions to management's attention or correct those you can. WORKING CONDITIONS: This is a full-time position with typical working hours between 7:00 am to 6:00 pm. Overtime and weekend work may be possible based on business conditions. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will be required to work in an environment with exposure to elements such as extreme temperatures and various weather conditions, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. While performing the duties of this job, the employees is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. There is frequent lifting and/or moving of up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color and peripheral vision, depth perception and ability to adjust focus. BENEFITS: Competitive total rewards package including benefits and 401(k) beginning day one of employment. Continuing education and training opportunities; tuition reimbursement for those who qualify. Vacation and Holiday Pay Paid Parental Leave Team building, engagement events, and community involvement Scholarship Program And much more! PAY & TRAINING: This position offers a pay range between $19.00 - $25.00 per hour depending on skills and qualifications for non-bargaining employees. Pay is provided on a bi-weekly basis and there are 14 days in the pay period, beginning on a Monday and ending on a Sunday. A customized training plan and career path is identified for each trainee and provided within the first week of employment, outlining growth and advancement opportunities.

Can you cut it with the industry leaders in meat portioning and cooking? We're always looking for sharp minds and sure hands to join our family business. We are committed to maintaining a safe, diverse, and welcoming workplace for all. The FSQA Technician I is a multiple task position and is part of a dynamic team. The candidate will be responsible for monitoring Food Safety and Quality Procedures. The FSQA Technician I is responsible for following proper program procedures, verification of procedures, record keeping and documentation, and corrective actions throughout the day. ESSENTIAL DUTIES AND RESPONSIBILITIES: Process control of Food Safety and HACCP Systems Process control through verification of programs, processes, and finish goods specifications Maintenance of customer specifications Knowledgeable of USDA role and contact of onsite FSIS Inspector USDA (MT) Sampling Pre-Operational Microbial Sampling New Hire GMP, Food Safety, and Food Defense Orientation Raw Material Audits and Verification of Supplier Specifications Verification of packaging, pack dates, and product codes Responsible for monitoring and enforcing all Good Manufacturing Practices Reporting violations and non-conformances to the FSQA Manager or FSQA Supervisor Responsible for completing reports and finishing tasks assigned by the FSQA Manager or FSQA Supervisor Must be flexible to working overtime and weekends Other duties as assigned. EDUCATION, SKILLS, AND EXPERIENCE: 6 months of related experience or training; or equivalent combination of education and experience. Must have excellent oral and written communication skills and must be able to communicate with all personnel. Bilingual is a plus. Basic math skills. Basic Microsoft Office Skills. PHYSICAL DEMANDS: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Function Amount of Time None Under 1/3 1/3 to 2/3 Over 2/3 Stand X Walk X Sit X Use hands to finger, handle or feel X Reach with hands and arms X Climb or balance X Stoop, kneel, crouch or crawl X This job requires that weight be lifted or force be exerted as reflected below. Function Amount of Time None Under 1/3 1/3 to 2/3 Over 2/3 Up to 10 pounds X Up to 25 pounds X Up to 50 pounds X Up to 100 pounds X More than 100 pounds X WORK ENVIRONMENT: Cold Temperature: While performing the duties of this job, the employee is regularly exposed to wet and/or humid conditions, moving mechanical parts, and extreme cold temperature. The noise level in the work environment is moderate. NOTE: This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employees will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. All duties and responsibilities are essential functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbents will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities. This document does not create an employment contract, implied or otherwise, other than an “at will” relationship. We are people powered! If you want to build strong relationships, grow professionally and personally, and produce quality, you'll enjoy your career with us!