Quality Inspector jobs at Textron - 612 jobs

Will perform a variety of FPI and x-ray operations and inspections, read, interpret and understand appropriate drawings, procedures and instructions and operate all required radiography equipment. Will also perform routine maintenance on radiography and FPI equipment as needed. Will train level 1 technicians and work with the level 3 technicians to improve processes and reduce waste in the value stream. RESPONSIBILITIES: * Assist in scheduling workload of X-ray and FPI operations. * Perform cycle counts to improve efficiencies in the department. * Work with floor supervisors to help establish production routines. * Insure that travelers, routings and TMD's are being complied with throughout the department. * Operate X-ray machines and FPI booths as required. * Read and understand part drawings and specifications associated with NDT. * Learn/perform basic computer operations. * Work closely with the engineering group and weld and braze specialists. * Develop and approve X-Ray techniques for various new weld and braze designs. * Provide training to facility level I and II technicians. * Perform other duties as requested QUALIFICATIONS: High School diploma or equivalent. * Good interpersonal skills and willingness to work effectively as a participative team member. * May be required to lift up to 50 lbs. * Utilize good verbal and written communication skills. * Accurately perform basic mathematical calculations. * Have at least 2 years" experience as a Level II in Radiography and FPI.

Are you ready to be part of a team that values safety, continuous improvement, quality, and employee well-being? CHEP is looking for a motivated Quality Lead to join our team in Pendergrass, GA. **2nd shift hours are Monday through Thursday 6p-4:45a with shift differential incentive pay** Job Description Summary Oversee and manage quality control initiatives, ensuring compliance with corporate quality guidelines and driving continuous improvement efforts to optimize plant performance. Lead audits, training, and issue resolution activities to uphold quality standards and promote a culture of excellence within the plant. Act as a key liaison with internal and external stakeholders, addressing quality concerns and fostering strong relationships with customers and vendors. Key Responsibilities May Include: Conduct and validate quality audits across the plant, ensuring all processes align with corporate policies, goals, and quality objectives. Train and develop plant personnel on quality guidelines and best practices, promoting a continuous improvement mindset and fostering quality awareness across teams. Track and report key quality performance metrics, including Acceptable Quality Limits (AQL), Pest Control Program (PCP) compliance, and customer complaints. Investigate and resolve quality issues, including customer complaints and rejected loads, using root cause corrective actions (RCCA) and implementing preventive measures. Maintain and manage quality-related documentation, ensuring all records meet corporate and regulatory standards. Collaborate with regional quality teams and internal stakeholders to address plant-specific quality concerns and ensure consistency in quality management across locations. Lead continuous improvement projects targeting quality systems and processes, working with cross-functional teams to implement solutions that enhance operational performance. What we Offer: Competitive Pay w/ Shift Differential Benefits Day 1! 401K w/ company match (up to 4%) FREE company-paid vision, short-term disability, and life insurance!! FREE company-provided PPE and safety equipment Tuition reimbursement, parental leave, childcare assistance, profit sharing, and MORE!

RESPONSIBILITIES: Responsibilities may include some or all of the following: Maintain accurate and up-to-date acceptance and rejection records and/or certifications systems as required by the applicable specifications. Determine acceptance or rejection after inspection and/or calibration of parts, tools, instruments or x-ray film. Identify defective conditions and test failures and prepare all appropriate documentation and/or calibration history. INSPECTION Perform semi-complex inspection on detailed machined parts using a wide variety of measuring instruments to determine acceptability or rejections of parts and/or parts finish. Adapt and develop inspection set-ups to check sample parts, forgings and castings. Check tool and jig layouts. Perform first article and envelope inspection, source inspections, and/or semi-complex surface plate set-ups. Interpret specifications, charts, manuals and other data to arrive at acceptance or rejection. Use mathematics to convert blueprint dimension and tolerances. Work within the guidelines of drawings, schematics, blueprints, route sheets, travelers, quality directives, technical engineering specifications, customer's requirements and military standards. Layout and measure hole locations and centerlines on castings, forgings, and machine parts to maintain control of machining cycle during manufacture. Determine acceptance or rejection after inspecting parts, tools, instruments or x-ray film. Identify causes of defective conditions and test failures and prepare all appropriate documentation. Investigate cause of customer return failures. Perform inspections to applicable specifications within assembly, test and shipping departments. Assist customer/government source inspectors as necessary. CALIBRATION Perform calibration on various types of semi-complex measuring and test equipment. Set-up calibration test conditions interpreting calibration procedures, specifications, manufacturing instructions or related documents. Document and evaluate historical data to determine calibration intervals. Diagnose and calibrate newly acquired equipment. NONDESTRUCTIVE TEST Perform daily, weekly and monthly equipment and material checks. Perform pre-inspection and post-inspection cleaning. Set-up equipment and conduct tests of a semi-complex scope. Perform complete inspections in accordance with the applicable specifications, standards and other contractual documents. Interpret, evaluate and document inspection results in accordance with approved procedures. Observe all prescribed safety rules and regulations and maintain a FOD free work area. Perform other related responsibilities. Job Requirements: ⦁ Three years related inspection, calibration, or NDT experience or demonstrated ability to perform described responsibilities. ⦁ May be required to be certified as a Level II Nondestructive Test Inspector in two or more disciplines. ⦁ Certification must be in accordance with MIL-STD-410 and PES1-29. ⦁ Preferred experience of CMM operations, background in dimensioning and tolerancing per ANSI Y 14.5. ⦁ Knowledge of applicable military standards or specifications required. ⦁ Proficient in reading and interpreting blueprints, customer's specifications and internal drawings and procedures. Possess working knowledge of shop mathematics including trigonometry.

Under the direction of the Quality Lab Supervisor, with guidance from the Quality Lab Tech Lead, the Quality Assurance Lab Technician is responsible for the completion of testing and inspection, dimensional analysis and support of other departments within HellermannTyton. This position requires the Technician be able to complete product/process inspections in a product enviornment as well as a lab environment while managing files and software. Overtime will be required including some weekend hours. This position will also maintain HellermannTyton's TS16949/ISO14001/EMS certifications by supporting all corporate policies, procedures, work instructions and required documentation. Essential Functions: Understand Customer Expectations as they relate to Product Quality Thrive in and help support a Team Atmosphere Help support the HellermannTyton Team by mentoring Operators regarding Quality of Product Perform 1st Piece Inspection of manufactured product Perform in-process inspection of manufactured product Perform Product specific tests including but not limited to tensile Perform moisture analysis on manufacutured product as well as incoming Verify Material Certification and Approve raw material Enter and edit SPC data in the SPC computer file File all QA records and samples (obsolete and current). Use incoming color chip samples to verify colorant in receiving Handle non-conforming material isolation and documentation Perform a dimensional layout referencing the HellermannTyton drawing Use SPC software Record all inspection and test data. Weigh parts. Use control plans. PPAP and PPC testing. Assist in maintaining HellermannTyton's Quality and Environmental certification by supporting: Corporate policies, procedures, work instructions and required documentation. Other Functions Become a "Go To" person for production personnel regarding Quality of Product Determine "Clean Point" when a non conformance is found Support LEAN Work Environment Other duties may be assigned. Key Competencies Ability to read Blue Prints Ability to use basic hand meausring tools Have basic math skills Ability to comminicate effectively both written and orally Basic computer skills a plus Injection Molding knowledge a plus Qualifications (skills, knowledge, experience) High school diploma or equivalent required. 1 year prior lab experience preferred Good math and communication skills. Computer skills - Windows, Excel Good vision. Mic and caliper knowledge preferred. Problem solving skills. Blue print reading skills preferred. Excellent verbal & written communication skills. Bend over in order to lift 50lbs. Ability to lift/push/pull up to 50 lbs. All employees entering the Manufacturing area and other identified locations must wear the designated Personal Protective Equipment (PPE) for their position. Wearing your Personal Protective Equipment (PPE) is a condition of employment. Ability to work daily and weekend overtime to meet the needs of the department and customer. #LI-Onsite #LI-KN1 Rev. 5.18.2023 By applying for a position with HellermannTyton, you understand that should you be made an offer, it will be contingent on your undergoing and successfully completing a background check through the use of our 3rd party supplier. Background checks may include some or all of the following based on the nature of the position: SSN/SIN validation, education verification, employment verification, criminal check, driving history, and drug test. You will be notified during the hiring process of which checks are required by the position. HellermannTyton Corporation is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class.

Altom Transport is currently seeking an HM183 Cargo Tank Inspector to fill a first-shift position at our Chicago terminal. This role also includes responsibilities as a lead trailer mechanic. Our full-service maintenance facility is designed to work on our private fleet. Take the next step in your career and join our family. Visit altomtransport.com and apply today. Feel free to reach out directly to us with any questions! This position operates out of our Indianapolis terminal. Compensation: Full compensation package: $75,000 - $100,000 based on location and experience Requirements A self-starter that works as a team member under the direction of management Ability to prioritize work and follow through with repairs Must be creative, dedicated, and take responsibility for repair work Verifiable mechanical experience and own hand tools are required General maintenance and repair experience Liquid tanker experience HM183 experience Pre-Employment Drug Screen and Background Check is required Benefits Complete benefits package includes: Full Family Health Insurance - Prescription Card, Dental, Vision 401K Retirement Plan/Company Match Profit-Sharing Paid Vacation & Holidays Boot Allowance Quarterly Tool Bonus Quarterly shop and safety bonuses Glove program Company-paid Training

Altom Transport is currently seeking an HM183 Cargo Tank Inspector to fill a first-shift position at our Chicago terminal. This role also includes responsibilities as a lead trailer mechanic. Our full-service maintenance facility is designed to work on our private fleet. Take the next step in your career and join our family. Visit altomtransport.com and apply today. Feel free to reach out directly to us with any questions! Compensation: Full compensation package: $75,000 - $100,000 based on location and experience Requirements A self-starter that works as a team member under the direction of management Ability to prioritize work and follow through with repairs Must be creative, dedicated, and take responsibility for repair work Verifiable mechanical experience and own hand tools are required General maintenance and repair experience Liquid tanker experience HM183 experience Pre-Employment Drug Screen and Background Check is required Benefits Complete benefits package includes: Full Family Health Insurance - Prescription Card, Dental, Vision 401K Retirement Plan/Company Match Profit-Sharing Paid Vacation & Holidays Boot Allowance Quarterly Tool Bonus Quarterly shop and safety bonuses Glove program Company-paid Training

Job Title: Quality Inspector, Machine Shop Company: Custom Control Sensors, LLC Employee Type: Full Time, Non-Exempt Industry: Manufacturing Hours: 2pm to 10:30pm Education & Experience: High School Diploma or Equivalent GED 4+ years of hands-on inspection experience with precision machined parts in an aerospace, medical, or automotive manufacturing environment Company Overview Custom Control Sensors, LLC (CCS) is a global leader of pressure, temperature, and liquid flow switches and sensors for the Aerospace, Defense, and Industrial markets. Since 1957, we have provided high-reliability electro-mechanical devices that utilize the "DUAL-SNAP" action disc spring principle we pioneered. We are AS 9100 and ISO 9001 certified. Industrial Product certifications include UL, CSA, ATEX, GOST, CCC and IECEx. We are growth-orientated, and dedicated to the continued cultivation of a vibrant, energetic work environment. Fostering interaction and collaboration between all associates, connection with our customers, and opportunity for creativity is our primary focus. Benefits MedicalDental 401k with MatchEmployer funded Life Insurance and Long-term DisabilityVoluntary Short-term DisabilitySick and Vacation Leave9 Paid Holidays2nd Shift Differential Job Description The Quality Inspector is responsible for ensuring that all machined parts and assemblies produced by the company meet the company's quality standards. This includes inspecting the parts for conformance to engineering drawings and specifications, as well as for any defects or non-conformances. The Quality Inspector will also inspect incoming raw materials, products, and services for conformance to purchase orders (POs), engineering drawings, and specifications. The Quality Inspector will use a variety of inspection tools and equipment to perform their duties, such as calipers, micrometers, optical comparators, and CMMs. They will also use their knowledge of technical drawings and GD&T to inspect the parts and assemblies. The Quality Inspector is a critical member of the quality team and plays a vital role in ensuring that the company's products meet the highest quality standards. They must be highly skilled and knowledgeable, and they must be able to work independently and as part of a team. Key Responsibilities 80% of work: Mechanical Inspection of parts produced by Machine shop Conducting Acceptable Quality Level (AQL) inspection to exacting tolerances, castings, forgings, machined parts, sheet metal parts and assemblies furnished by vendors or fabricated in-house.Inspects machined parts for proper material, processes, completion of operations, workmanship and conformance to engineering approved sketches, drawings and specifications.Read and understand engineering drawings and specifications and perform mathematical computations.Conducting visual inspections and utilize standard inspection devices such as calipers, micrometers, indicators, height gages, dial bore gages, optical comparator and thread gages.Works with common geometric features used in blueprints and provide application knowledge of how to inspect for each (roundness, concentricity, flatness, runout, perpendicularity and parallelism) Utilize advanced inspections equipment, including Keyence Optical ComparatorCreate new programs for new parts and assemblies using the Keyence Optical comparator Record data on production documents and ensure all documentation is accurate and complete Performs first article inspections at the machine or assembly and provides and accept or reject decision.Inspects functional gages, fixtures, molds, dies, tooling, etc., for conformance to drawings.Prepare and maintain required inspection reports and records.20% of work: Receiving Inspection on raw material, Products and services Inspect incoming raw materials, products, electronics, and services for conformance to purchase orders (POs), engineering drawings, and specifications.Identify and report any non-conformances to the appropriate personnel.Work with Quality Engineers and Managers to resolve any issues that may arise.Other DutiesAssist in the activities of other inspectors as directed.Perform related work requiring equal or lesser skill.Interact appropriately with others in order to maintain a positive and productive work environment.Work with minimal supervision to the quality industry and department standards, while adhering to best safety practices.Accomplish inspection-related tasks as directed by the Planner and Supervisors.Documenting non-conformances in Discrepancy Reports (DRs).Maintaining high quality standards with minimal discrepant work.Other duties as assigned by Supervisor and/or Quality Manager. Skills and Requirements Due to need to maintain ITAR compliance, applicants must be U.S. citizen or legal permanent resident.Familiarity with AS9100 and AS9102 aerospace standards Proficiency in using precision measuring equipment (e.g. Calipers, Micrometers, Optical Comparators, etc.) Must have a strong understanding of computer operation, trigonometry, and AQL Sampling methodologies Ability to read and write in EnglishAbility to maintain quality of work as per company specifications Ability to use Windows and MS-Office (Outlook, Excel, etc.) Possess advanced knowledge of technical drawings (ANSI/ASME Y14.5 GD&T) CMM experience, Programming with PCDMIS is a plus Ability to program Keyence optical comparator is a plus Required to work to a dimensional tolerance as small as .0002"Strong communication skills in English (written and verbal) Time management skills Adaptability and flexibility to changing situations and new tasks Availability to overtime as needed to support OperationsIndependent problem-solving skills with minimal instruction Professional demeanor and teamwork orientation. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously require sitting, using hands and fingers to flex and extend fingers with opposition of thumb-palmar grasp, talk or hears. The employee is frequently required to stand, walk, bend, stoop, reach, turn, twist, push, and pull and to move within all areas of the facilities and parking lots. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision peripheral vision, color vision, depth perception and the ability to adjust and focus. EEO M/F/D/V Custom Control Sensors, LLC. is an Equal Opportunity employer. All qualified applicants for employment shall receive fair and equal treatment regardless of their race (including hair texture and protective hairstyles, such as braids, locks, and twists), color, religion, creed, sex/gender, marital or registered domestic partnership status, age, national origin or ancestry, citizenship, pregnancy, childbirth, breastfeeding or related medical conditions, mental or physical disability (including HIV and AIDS), medical condition including genetic information or characteristics (including those of family members), sexual orientation, veteran or military status, gender identity, gender expression, transgender status or any other basis protected by federal, state or local law, ordinance or regulation. The policy not to discriminate includes, but is not limited to, advertising for positions, recruiting, hiring, placement, promotion, transfer, rates of pay, discipline and termination. No recruiters or recruitment agencies. Monday through Friday, 2pm to 10:30pm Compensation details: 19.12-25.4 Yearly Salary PI8ee9113d9e03-31181-37063221

Job DescriptionQuality Inspector-CMM Operator (Swing Shift) Precision matters here. If you have an eye for detail and take pride in getting it right, we want to meet you. Are you an experienced Quality Inspector who enjoys working with precision parts and advanced inspection tools? Do you take satisfaction in knowing your work ensures products meet the highest standards? Join JD Machine and be part of a lean, team-oriented manufacturing environment equipped with some of the best inspection equipment in the industry. What You'll Do As a Quality Inspector, you'll play a critical role in ensuring our products meet customer, blueprint, and AS9100 requirements. Your responsibilities will include: Inspecting and approving plated and processed parts, including anodize, paint, chem film, and other finishing processes Verifying product conformance to blueprints using micrometers, calipers, CMM, surface plates, optical comparators, and other inspection tools Completing inspection documentation and records in compliance with AS9100 standards Auditing product and procedures to ensure ongoing AS9100 compliance Collaborating with manufacturing and quality team members to support continuous improvement What We're Looking For At least 6 months of hands-on experience using common inspection and measurement tools Availability to work swing shift: Monday-Thursday, 3:45 p.m.-1:45 a.m. Willingness to work overtime when needed Strong communication skills and the ability to work well in a team-focused environment A detail-oriented mindset and commitment to quality Why JD Machine We believe great people deserve great benefits and a great place to work. JD Machine offers: Competitive wages Comprehensive benefits: health, dental, life, and LTD insurance 401(k) with generous company match Paid time off starting on your first day Profit sharing program Frequent company events and a positive team culture Modern, state-of-the-art facilities and inspection equipment If you take pride in precision and want to work where quality truly matters, we'd love to hear from you. Apply today and help us set the standard. Job Posted by ApplicantPro

The Panther Group is seeking a Quality Inspector to support inspection activities throughout the production assembly process, from in-process inspection through final system assembly. This role is open to both entry-level and experienced candidates, with training provided for those new to quality inspection. 1st shift (for Quality Inspector 1) Mon-Fri, 6am-2:30pm. 2nd shift (for Quality Inspector 2) Mon-Fri, 2:30pm-10:30pm. or 3:30pm - midnight. Essential Duties & Responsibilities Perform in-process, first article, and final inspections throughout manufacturing Verify products meet workmanship, process, documentation, and customer requirements Follow ESD and board handling requirements Handle Moisture Sensitive Devices (MSD) per component MSL requirements Review documentation for compliance with internal procedures Disposition assemblies for rework or repair as needed Authorize shipment of product that meets industry and customer specifications Use inspection tools such as calipers, rulers, microscopes, and gauges Support ISO Quality Management Systems and site 6S objectives Accurately record inspection results in the electronic manufacturing system Support one or multiple product lines based on experience level Perform other related duties as assigned Qualifications Required: High School Diploma or GED Pass IPC-DVD-64C Component Identification. Pass IPC-A-610 Modules, 1, 2, 3, 4, 5, 6, 7 & 8. Ability to read assembly drawings, blueprints, and Bills of Materials Familiarity with First Piece, In-Process, Audit, and Final Inspection Knowledge of ESD and electronic assembly environments Ability to use Inspection Gauge (Calipers, Rulers, Microscope, etc.) Ability to use electronic manufacturing system (OCuity) Ability to use Microsoft Office tools like Excel and Word as well as shop floor control systems (Aegis). Ability to work in a team-oriented manufacturing environment Strong attention to detail and sense of urgency Comfortable performing repetitive inspection tasks Ability to follow written procedures and instructions Preferred (training may be provided): IPC-A-610 and IPC-DVD-64C certifications Experience Levels Entry-Level: 0-6 months manufacturing or inspection experience Experienced: 2+ years of quality inspection or related technical experience Technical or vocational certification may substitute for experience Pay is $20 - $25 / hour depending on experience and shift. #INDENG

Will be responsible for the inspection of production and prototype hardware using predetermined methods, operations, setups, and prescribed specifications to perform in-process and final inspections of machined parts. Cross training will be required in multiple inspection areas. Primary Responsibilities: * Perform inspections in accordance with technical documentation * Inform supervisor or management when concerns with quality issues arise * Assist the Supervisor/Manager, as needed, with various audits and compliance projects * Perform miscellaneous duties and projects as assigned and required. * Adhere to AS9100 and other quality standards * Cross train in other inspection areas Requirements: * Ability to work in a team environment that promotes high morale, teamwork, pride, productivity and excellent quality * Demonstrated ability to effectively perform assigned tasks and interpret results of inspection * Knowledge of precision measuring equipment (micrometers, dial calipers, etc.) * Ability to meet critical deadlines and work in fast paced environment * High school diploma, GED or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Strong math background * Ability to process and communicate information using Microsoft Office software * Participate in cross-training efforts interacting with other departments to acquire additional skills and knowledge * Must be able to follow verbal and written instructions in English * Must be able to communicate information to others verbally and in writing in English * 20/25 vision (natural or corrected) required * Must be able to work independently with minimal supervision * Must be able to perform overtime when necessary, including weekends when required * Perform miscellaneous duties and projects as assigned and required * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Preferable Experience: * 1-3 years of previous manufacturing experience * Ability to interpret geometric dimensions and tolerances * Prior experience with visual, airflow, and dimensional inspections of aerospace / gas turbine components a plus * Experience working in a Quality System certified to ISO9001, AS9100, or Nadcap a plus Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, move throughout the facility, and communicate. Work in office environment and use of computer (typical 2-button scroll mouse and keyboard - 75% of the work day). The employee must frequently lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, submit resume noting job inquiry ID #3201781225 to the Human Resources Department by email at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

Will be responsible for the inspection of production and prototype hardware using predetermined methods, operations, setups, and prescribed specifications to perform in-process and final inspections of machined parts. Cross training will be required in multiple inspection areas. Primary Responsibilities: * Perform inspections in accordance with technical documentation * Inform supervisor or management when concerns with quality issues arise * Assist the Supervisor/Manager, as needed, with various audits and compliance projects * Perform miscellaneous duties and projects as assigned and required. * Adhere to AS9100 and other quality standards * Cross train in other inspection areas Requirements: * Ability to work in a team environment that promotes high morale, teamwork, pride, productivity and excellent quality * Demonstrated ability to effectively perform assigned tasks and interpret results of inspection * Knowledge of precision measuring equipment (micrometers, dial calipers, etc.) * Ability to meet critical deadlines and work in fast paced environment * High school diploma, GED or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Strong math background * Ability to process and communicate information using Microsoft Office software * Participate in cross-training efforts interacting with other departments to acquire additional skills and knowledge * Must be able to follow verbal and written instructions in English * Must be able to communicate information to others verbally and in writing in English * 20/25 vision (natural or corrected) required * Must be able to work independently with minimal supervision * Must be able to perform overtime when necessary, including weekends when required * Perform miscellaneous duties and projects as assigned and required * Ongoing FAA testing and training required * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment FAA drug testing will be required. Preferable Experience: * 1-3 years of previous manufacturing experience * Ability to interpret geometric dimensions and tolerances * Prior experience with visual, airflow, and dimensional inspections of aerospace / gas turbine components a plus * Experience working in a Quality System certified to ISO9001, AS9100, or Nadcap a plus Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, move throughout the facility, and communicate. Work in office environment and use of computer (typical 2-button scroll mouse and keyboard - 75% of the work day). The employee must frequently lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, submit resume noting job inquiry ID #3201771125 to the Human Resources Department by email at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

Will be responsible for the inspection of production and prototype hardware using predetermined methods, operations, setups, and prescribed specifications to perform in-process and final inspections of machined parts. Cross training will be required in multiple inspection areas. Primary Responsibilities: * Perform inspections in accordance with technical documentation * Inform supervisor or management when concerns with quality issues arise * Assist the Supervisor/Manager, as needed, with various audits and compliance projects * Perform miscellaneous duties and projects as assigned and required. * Adhere to AS9100 and other quality standards * Cross train in other inspection areas Requirements: * Ability to work in a team environment that promotes high morale, teamwork, pride, productivity and excellent quality * Demonstrated ability to effectively perform assigned tasks and interpret results of inspection * Knowledge of precision measuring equipment (micrometers, dial calipers, etc.) * Ability to meet critical deadlines and work in fast paced environment * High school diploma, GED or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Strong math background * Ability to process and communicate information using Microsoft Office software * Participate in cross-training efforts interacting with other departments to acquire additional skills and knowledge * Must be able to follow verbal and written instructions in English * Must be able to communicate information to others verbally and in writing in English * 20/25 vision (natural or corrected) required * Must be able to work independently with minimal supervision * Must be able to perform overtime when necessary, including weekends when required * Perform miscellaneous duties and projects as assigned and required * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Preferable Experience: * 1-3 years of previous manufacturing experience * Ability to interpret geometric dimensions and tolerances * Prior experience with visual, airflow, and dimensional inspections of aerospace / gas turbine components a plus * Experience working in a Quality System certified to ISO9001, AS9100, or Nadcap a plus Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, move throughout the facility, and communicate. Work in office environment and use of computer (typical 2-button scroll mouse and keyboard - 75% of the work day). The employee must frequently lift or move up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, submit resume noting job inquiry ID #3201791225 to the Human Resources Department by email at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. **Job Posting External** **Responsibilities:** + Working knowledge of statistical data collection Capabilities Studies and Gage R&R's + Work with Product development activities + Project management skills + Advance knowledge of metallurgical equipment + Assist in Development of training programs regarding complex measuring equipment + Create and modify programs for stationary and portable coordinates measuring equipment & related software. + Writing maintaining and troubleshooting gage programs + Participating in projects + Maintaining cleanliness and organization of work areas (5s) + Comply with all applicable occupational Environmental, Health, and Safety standards, as well as Crown's safety rules and regulations for each task performed. To prevent the risk of injury, report unsafe conditions and do not perform unsafe acts. + Other duties as assigned **Requirements:** + Per 8 hours shift (any combination of standing, sitting and walking ) occasionally bend, squat, climb, reach above shoulder level, kneel, balance and push or pull objects, frequent lifting and carrying (frequently 0- 10 lbs and occasionally 11-50lbs) + Must be able to hear, have good vision, distinguish colors, simple and fine grasping with both hands + Must be able to work in a moderately noisy environment that includes exposure to coolants, lubricants, dust, adhesives, solvents, oils and weld flash. + Inspection equipment and ability to read and understand blueprints; advanced math skills + Communicate (verbal and written) effectively with other people, learn and understand work instructions + Retain knowledge; advance understating of computer work stations. + Completed Level 3 Inspection requirements within Crown's predetermined quality matrix. + 5 years of experience required and/or 2 years associates' degree in Metrology or relative experience. + CMM programming, trouble shooting and operation and weld evaluations **Training:** + CWI (Certified Weld Inspector) - 120-hrs total classroom training / 3 exams (Hobart Technical Institute / AWS HQ) + Ultrasonic Testing - 96-hrs total classroom training plus 30-consulting-hrs (American Testing Services) + Welding Expert (currently called StructureExpert Weld) - 8-hrs in-house training (Crown) + WiKi-SCAN Portable Laser Weld Inspection - 12-hrs in-house training (Crown) + Magnetic Particle Testing (MT) / Dye Penetrant Inspections - 40-hrs classroom training (Hobart Technical Institute) / 4-hrs in-house MT (Crown) + Microhardness Inspection - 24-hrs classroom training (Leco Corporation) + Spectrometer (Spectrotest) - 12-hrs in-house training (Crown) + Nikon Vision Measuring System - 48-hrs [(2) 24-hr sessions] classroom training (Nikon Incorporated) **Work Authorization:** Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. **Compensation and Benefits:** Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. Job Posting External Responsibilities: * Working knowledge of statistical data collection Capabilities Studies and Gage R&R's * Work with Product development activities * Project management skills * Advance knowledge of metallurgical equipment * Assist in Development of training programs regarding complex measuring equipment * Create and modify programs for stationary and portable coordinates measuring equipment & related software. * Writing maintaining and troubleshooting gage programs * Participating in projects * Maintaining cleanliness and organization of work areas (5s) * Comply with all applicable occupational Environmental, Health, and Safety standards, as well as Crown's safety rules and regulations for each task performed. To prevent the risk of injury, report unsafe conditions and do not perform unsafe acts. * Other duties as assigned Requirements: * Per 8 hours shift (any combination of standing, sitting and walking ) occasionally bend, squat, climb, reach above shoulder level, kneel, balance and push or pull objects, frequent lifting and carrying (frequently 0- 10 lbs and occasionally 11-50lbs) * Must be able to hear, have good vision, distinguish colors, simple and fine grasping with both hands * Must be able to work in a moderately noisy environment that includes exposure to coolants, lubricants, dust, adhesives, solvents, oils and weld flash. * Inspection equipment and ability to read and understand blueprints; advanced math skills * Communicate (verbal and written) effectively with other people, learn and understand work instructions * Retain knowledge; advance understating of computer work stations. * Completed Level 3 Inspection requirements within Crown's predetermined quality matrix. * 5 years of experience required and/or 2 years associates' degree in Metrology or relative experience. * CMM programming, trouble shooting and operation and weld evaluations Training: * CWI (Certified Weld Inspector) - 120-hrs total classroom training / 3 exams (Hobart Technical Institute / AWS HQ) * Ultrasonic Testing - 96-hrs total classroom training plus 30-consulting-hrs (American Testing Services) * Welding Expert (currently called StructureExpert Weld) - 8-hrs in-house training (Crown) * WiKi-SCAN Portable Laser Weld Inspection - 12-hrs in-house training (Crown) * Magnetic Particle Testing (MT) / Dye Penetrant Inspections - 40-hrs classroom training (Hobart Technical Institute) / 4-hrs in-house MT (Crown) * Microhardness Inspection - 24-hrs classroom training (Leco Corporation) * Spectrometer (Spectrotest) - 12-hrs in-house training (Crown) * Nikon Vision Measuring System - 48-hrs [(2) 24-hr sessions] classroom training (Nikon Incorporated) Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities Nearest Major Market: Lima Nearest Secondary Market: Findlay Job Segment: Welding Inspector, Testing, Welding, Warehouse, Forklift, Manufacturing, Technology

Job DescriptionSalary: $20/hr - $33/hr Primus Aerospace is a leading manufacturing partner to aerospace, defense & space OEMs / Primes & Tier I suppliers. The company specializes in producing high-tolerance, complex geometry parts; machined out of standard and exotic metals. Primus works directly with all major aerospace manufacturers (e.g., Boeing, Lockheed, Northrop) to provide components to mission critical civilian and defense programs. Job Purpose: The Quality Inspector performs inspections of product against customer requirements and according to internal procedures while maintaining the timely flow of product and minimizing escapes and other non-conforming materials. Quality Inspector Key Responsibilities and Accountabilities: Perform First Piece, Lot and Final Inspections against customer requirements Conduct in-depth review and able to properly interpret acceptance criteria in accordance with customer purchase order & specifications, including industry standards Command of problem solving techniques such as; 8D, Fish-Bone, 5-why & facilitate Team Based Root Cause Corrective Action(s). Define detailed in-process & final inspection plans Audit in process inspection reports/checklist on the production floor Perform and fill out AS9102 First Article Inspections and Inspection Reports Compile and confirm the accuracy of customer required shipment paperwork Understand and follow internal inspection procedures and maintain inspection records Proper tool selection based on tolerance zones Understand and maintain the ERP system per company policies Keep current with industry inspection techniques, practices and required standards Understand and stay current with industry standard inspection equipment; including calipers, micrometers, bore gauges, height gauges, indicators, etc. and the calibration and maintenance of these instruments Understand and stay current with GD&T standards, terminology and inspection methodologies Be willing to perform other duties as assigned (Calibration, Audits, CAPA, Customer Complaints, RMAs, etc.) At least 3-5 years practical experience in bench inspections and general practices and methodologies Requirements Experience with AS9100 and AS9102 Working knowledge of Special Processes Minimum of 3-5 years practical experience working with bench inspection processes and in-process inspections Working knowledge of Geometric Dimensioning and Tolerancing (GD&T) Strong time management Ability to work independently and meet deadlines Experience working in a manufacturing environment Good verbal and written communication Experience working with MS Excel and Word We offer comprehensive benefits including: Paid Time Off 401(k) with employer match Quarterly Incentive compensation Paid Holidays Medical, dental, vision & life insurance Short- and long-term disability IMPORTANT NOTICE: To adhere to U.S. Government international trade regulations, applicant must be a U.S. Citizen, or lawful permanent resident of the U.S. At Primus Aerospace, we are proud to be an Equal Opportunity Employer. We are committed to creating an inclusive environment that supports, respects, and celebrates all individuals. #zr #cj

: Crown Equipment Corporation is a leading innovator in world-class forklift and material handling equipment and technology. As one of the world's largest lift truck manufacturers, we are committed to providing the customer with the safest, most efficient and ergonomic lift truck possible to lower their total cost of ownership. Job Posting External Responsibilities: Working knowledge of statistical data collection Capabilities Studies and Gage R&R's Work with Product development activities Project management skills Advance knowledge of metallurgical equipment Assist in Development of training programs regarding complex measuring equipment Create and modify programs for stationary and portable coordinates measuring equipment & related software. Writing maintaining and troubleshooting gage programs Participating in projects Maintaining cleanliness and organization of work areas (5s) Comply with all applicable occupational Environmental, Health, and Safety standards, as well as Crown's safety rules and regulations for each task performed. To prevent the risk of injury, report unsafe conditions and do not perform unsafe acts. Other duties as assigned Requirements: Per 8 hours shift (any combination of standing, sitting and walking ) occasionally bend, squat, climb, reach above shoulder level, kneel, balance and push or pull objects, frequent lifting and carrying (frequently 0- 10 lbs and occasionally 11-50lbs) Must be able to hear, have good vision, distinguish colors, simple and fine grasping with both hands Must be able to work in a moderately noisy environment that includes exposure to coolants, lubricants, dust, adhesives, solvents, oils and weld flash. Inspection equipment and ability to read and understand blueprints; advanced math skills Communicate (verbal and written) effectively with other people, learn and understand work instructions Retain knowledge; advance understating of computer work stations. Completed Level 3 Inspection requirements within Crown's predetermined quality matrix. 5 years of experience required and/or 2 years associates' degree in Metrology or relative experience. CMM programming, trouble shooting and operation and weld evaluations Training: CWI (Certified Weld Inspector) - 120-hrs total classroom training / 3 exams (Hobart Technical Institute / AWS HQ) Ultrasonic Testing - 96-hrs total classroom training plus 30-consulting-hrs (American Testing Services) Welding Expert (currently called StructureExpert Weld) - 8-hrs in-house training (Crown) WiKi-SCAN Portable Laser Weld Inspection - 12-hrs in-house training (Crown) Magnetic Particle Testing (MT) / Dye Penetrant Inspections - 40-hrs classroom training (Hobart Technical Institute) / 4-hrs in-house MT (Crown) Microhardness Inspection - 24-hrs classroom training (Leco Corporation) Spectrometer (Spectrotest) - 12-hrs in-house training (Crown) Nikon Vision Measuring System - 48-hrs [(2) 24-hr sessions] classroom training (Nikon Incorporated) Work Authorization: Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. Compensation and Benefits: Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. EOE Veterans/Disabilities

Build an Aviation Career You're Proud Of Your work ties us all together, helping our team's function and operate. Experience opportunities to learn and be a part of an organization that has your back. And with competitive compensation and total rewards, you'll also enjoy our great perks. Take charge of our day-to-day operations, so we remain the trusted source for aviation repair and maintenance. Work with your team to implement the right processes and practices across our organization to help ensure flight and product efficiency. What you'll do: Ensures the functional and acceptable status of the non-destructive test equipment in accordance with the appropriate company process. Determines the acceptance of parts and components for surface condition in preparation for the non-destructive test process. Performs the specific non-destructive test process as identified in the shop order work instruction. Processes the part(s) in accordance with the appropriate company process. Inspects and interprets the test results. Responsible for reporting on the status and performance of the NDT function to the NDT Manager as applicable. Exercises leadership on NDT related topics, including improvements and Continuous Improvement (CI) projects. Marks all unacceptable discontinuities for location and dimension. Provides technical support to NDT Inspectors Documents the completion and test results of non-destructive test process. Ensures parts are cleaned following completion of NDT process and in acceptable condition for further processing. Performs equipment and material maintenance checks in accordance with the appropriate company process. Maintains records of all maintenance performed on the non-destructive test equipment and materials. Provides instruction and training to NDT inspectors in inspection methods and practices to provide consistent application of best practices. Leads the development and monitoring of NDT related training plans including continual and re-current training Liaisons with engineering, inspection and other personnel as required to assist in researching and solving non-destructive test process problems. Acts as a mentor to NDT personnel and works closely with the Training and Development Specialist where necessary. Maintains personal qualifications as stated in the appropriate company process. Moves between production assignments that utilize multiple skills endorsements as needed to support production requirements. Responsible for observing all applicable safety requirements and reporting immediately any unsafe practices/conditions. As required, may be assigned to perform selected duties of the NDT Inspector to meet operational goals. Carries out other duties as assigned. Position Requirements: Strong planning, organizational, leadership, interpersonal, decision making, oral and written communication skills. Minimum level III in one NDT method Knowledgeable in and understanding of inherent and non-inherent discontinuities found in materials. Knowledgeable in the Workplace Health & Safety requirements. Maintain internal non-destructive test process approval. Ability to read, understand and interpret blueprints Proficient in technical writing. Excellent decision-making skills to ensure compliance to all customer, regulatory and company requirements. Ability to lift up to 50 pounds (unassisted) for approximately 25% of the average work day. Regularly required to sit and stand for prolonged periods. Working knowledge of production management computer system and other related internal control systems. Currently authorized to work in the Unites States without sponsorship.

Are you looking to join a dynamic team that provides its people with the tools to be successfull and opportunities to grow? Universal Logistics is a leading provider of customized transportation and logistics solutions, offering a comprehensive suite of services including transportation, value-added, intermodal, and specialized services utilized throughout entire supply chains. Universal has immediate career opportunities in your area. Apply today to become part of the Universal team! Summary: The Lead Gate Inspector is responsible for efficiently and accurately coordinating the movement of trucks and containers in and out of the facility while inspecting trailers, chassis, and containers for damage. This role requires excellent communication skills, attention to detail, and the ability to work in a fast-paced environment. Benefits: • Medical (3 plan options) • Dental & Vision • 401(k) • Paid Weekly • Paid Time Off (After probationary period) • Amazing Opportunity for Growth! Key Responsibilities: Gate Operations: - Greet and direct incoming and outgoing trucks, verifying necessary documentation and ensuring compliance with terminal rules and regulations. - Accurately record and update truck and container information in the terminal's computer system. - Issue gate passes, permits, and other required documentation to authorized personnel. - Coordinate with security personnel to ensure the safety and security of the terminal premises. Documentation and Recordkeeping: - Collect and review shipping documents, such as bills of lading, delivery orders, and customs paperwork, to ensure accuracy and completeness. - Enter data from shipping documents into the terminal's computer system accurately and efficiently. - Maintain organized and up-to-date records of truck and container movements, permits, and other relevant documentation. - Generate reports on gate activities, truck turn times, and any other requested metrics. Communication and Coordination: - Communicate effectively with truck drivers, customers, and other terminal personnel to facilitate smooth and efficient operations. - Coordinate with yard personnel to ensure the availability and proper placement of containers for loading and unloading. - Collaborate with customer service representatives to address customer inquiries, resolve issues, and provide timely updates. - Assist in coordinating with external stakeholders, including rail carriers, trucking companies, and regulatory authorities. Safety and Compliance: - Enforce safety protocols and regulations within the gate area, ensuring compliance by all personnel and visitors. - Monitor and report any security concerns, damages, or safety hazards to the appropriate personnel. - Stay updated on industry regulations and best practices related to intermodal rail terminal operations. - Assist in conducting safety and security training for terminal staff and contractors, as required. Customer Service: - Provide exceptional customer service to truck drivers, ensuring a positive experience during their interactions with the terminal. - Address and resolve customer concerns or complaints promptly and professionally. - Assist customers in locating containers and providing necessary information or assistance. Qualifications and Skills: - High school diploma or equivalent. - Valid Driver's license - Previous experience as a gate clerk or in a similar role within the intermodal rail or logistics industry is preferred. - Excellent communication and interpersonal skills. - Strong attention to detail and accuracy in data entry and recordkeeping. - Ability to multitask and prioritize tasks effectively in a fast-paced environment. - Proficiency in using computer systems and data entry software. - Basic knowledge of transportation and logistics operations. - Familiarity with relevant safety and security regulations. - Ability to work independently as well as in a team environment.

Reporting to the Waterjet Quality Manager, the Waterjet Inspector will be responsible for inspecting aerospace / gas turbine engine components for compliance with engineering drawings, customer requirements and company specifications. Accountable to approve items within specifications and recommend disposition of items not meeting standards. Will adhere to all quality standards. Requirements: * Must be able to use standard gauges (micrometers, height gauges, calipers etc.) * Must have a strong math background * Must have HS Diploma or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Demonstrated ability to effectively perform assigned tasks and interpret results of inspections * Must be able to interpret geometric dimensions and tolerances * Ability to meet critical deadlines and work in fast paced environment * Basic to Intermediate proficiency in MS Office software * Participate in cross-training efforts interacting with other departments to acquire additional skills and knowledge * Must be able to follow verbal and written instructions in English * Must be able to communicate information clearly verbally and in writing in English * 20/25 vision (natural or corrected) required * Must be able to work independently with minimal supervision * Must be able to perform overtime when necessary, including weekends * Must be willing to work a swing shift, if required * Ongoing FAA Testing and Training Mandatory * MTI is a safety sensitive manufacturer. As such, successful results of FAA drug testing will be required. Preferable Experience: Prior experience with visual, airflow, and dimensional inspections of aerospace / gas turbine components Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, move throughout the facility, and communicate. Work in office environment and use of computer (typical 2-button scroll mouse and keyboard - 25% of the work day). The employee must frequently lift or move up to 35 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit your resume noting job inquiry #4151301125WJ to the Human Resources Department at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.