Welder jobs at Trane - 367 jobs

Applicants must be currently authorized to work in the United States on a full-time basis. No sponsorship is available for this position. Inviting Bright Minds Ramboll is seeking motivated and inquisitive candidates to join the Custom Manufacturing and Innovation Center in our Liverpool, NY office. Develop your excellence in our collaborative, inclusive, diverse, and empowering culture at Ramboll! When you start with Ramboll, you'll be joining a company that strives to make a difference - for our employees, clients, and society. As you begin working on projects, you will be given increasing responsibility, while also being able to rely on experienced managers and colleagues who offer support and a helping hand as you learn and develop in your role. Job Description As our new Manufacturing Welder/Fabricator you will be part of a larger fabrication team that collaborates and motivates each other to design and create solutions to our manufacturing clients most demanding growth initiatives. You'll be on the leading edge of creating one-of-a kind custom products that will ensure our clients attain their demanding expectations. Your starting point for constant growth From the moment you join Ramboll, we will support your personal and professional development so that you grow with the company. For this role, we believe your starting point is: 4+ years of relevant welding/fabricating experience Welding Proficiencies: MIG, TIG, and Stick Welding Experience with Oxy-Fuel cutting on structural steel and pipe Experience with fitting and welding pipe Working knowledge of hand tools, power tools, and equipment Ability to read and understand fabrication blueprints & drawings Commitment to reliability, efficiency, and high quality work Experience using overhead cranes, forklifts, and rigging equipment Safety Minded, ability to work alone and with others. Willing to travel for equipment installation and commissioning Tasks and Responsibilities Ensure safety procedures and regulations are strictly followed Produce strong, clean welds Measure, fit, set, and assemble fabricated structures Document changes to original design through redlines Meet required production schedule Participate in project kickoff meetings Ensure quality control standards are met Maintain tools and equipment Maintain clean and organized work area Additional Information Our Commitment to Sustainability Responsible business conduct and sustainable practices have been part of Ramboll's DNA since the company's inception. Today these principles are an integral part of Our Mission and services and are formalized through our systematic work with the UN sustainable development goals. We are dedicated to taking a leading role in sharing best practices and creating value for clients by delivering solutions that are environmentally, economically, and socially sustainable. We have also committed to ambitious targets to maximize our own sustainability performance and set the industry benchmark. How to apply Apply online. Attach your CV, cover letter and relevant documents showcasing why you are the right fit for the role, and when you are available to start. We look forward to receiving your application. Where People Flourish Our mission is to create sustainable societies where people and nature flourish. This means that a culture of inclusion is embedded in everything we do. Our people bring diverse backgrounds and experiences to the company, enabling us to deliver innovative and forward-thinking solutions to our clients. We also know how important it is to achieve the right balance of where, when, and how much you work. At Ramboll, we offer flexibility as part of our positive and inclusive approach to work. We are committed to equal employment opportunity, regardless of age, disability or medical condition, gender identity, marriage and domestic partnership, pregnancy and maternity, race, ancestry, or national origin, religion or belief, sex and sexual orientation, military service and veteran status, or any other protected characteristic. Ramboll wants to ensure opportunities are accessible to candidates with disabilities. So, please let us know if there are any changes we could make to the application process to make it more comfortable for you. You can contact us at [email protected] with such requests.

Our Principles and Values: Manchester Tank has a proud heritage of hard-working people, who for over 75 years have manufactured high quality products for our country and the world. The McWane/Manchester Way Compass is provided as a personal guide to help team members navigate through situations they encounter daily at work and includes eight core principles to guide our team members: Communication, Safety, Environment, Leadership, Trust, Excellence, Accountability, and Teamwork. All team members are expected to know these principles, values, and behaviors. Our Compass Points ensure higher levels of safety and environmental performance in all our operations. It also improves communication, relationships, and work performance at all levels of our organization. Manchester Tank is an equal opportunity employer committed to providing equal employment opportunity in all employment practices. Manchester Tank will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA - gender identity or expression, and genetic information) or any other category protected by federal, state or local law. This employee is responsible for the set-up and operation of welding equipment. The employee must also monitor the process and quality of the product and make necessary corrections to the process in order to maintain a steady flow of quality product to the customer. Qualifications Reads prints and locates piece parts. Sets up operational parameters on the machine and monitor. Make corrections as needed. Positions, aligns, and fits components together. Welds fabricated, cast and stamped components to assemble tanks and pressure vessels. Completes first article inspection before starting run. Monitor the product quality using required gages and inspection criteria. Operation of lifting devices as needed. We offer a full benefit package, weekly pay, tuition reimbursement, paid holidays, and an employee referral program. Apply online today at mantank.com under careers. Starting Wage: $20.67/hour. Additional Information All your information will be kept confidential according to EEO guidelines. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. McWane is a Federal VEVRAA contractor, and an Equal Opportunity Employer committed to providing equal employment opportunity in all employment practices. McWane will not discriminate against any applicant for employment because of their race, color, religion, sex, national origin, age, sexual orientation, disability, veteran or service member status, marital status, citizenship status (In IL - sex, including same sex, ancestry, order of protection status, physical or mental disability, military status, pregnancy, unfavorable discharge status, genetic information), (In IA - gender identity), (In CA- gender identity or expression, and genetic information) or any other category protected by federal, state or local law.

Venture Dynamics- Gulf is hiring for Senior Aluminum Welders in New Orlean, LA. Paying $28.75hr $110 per diem. You will be responsible for performing high-quality aluminum welding and fabrication while leading and supporting junior welders. This role requires advanced welding skills, strong knowledge of aluminum alloys, and the ability to read technical drawings to produce structurally sound and visually clean welds that meet safety and quality standards. Key Responsibilities Perform advanced aluminum welding using TIG and/or MIG processes Interpret and work from engineering drawings, blueprints, and welding symbols Fabricate, assemble, and weld aluminum components and structures Ensure welds meet quality, strength, and appearance standards Set up welding equipment, select proper materials, and adjust parameters Inspect welds using visual inspection and measuring tools Troubleshoot welding defects and recommend corrective actions Lead, mentor, and support junior welders and fabricators Ensure compliance with safety regulations and company procedures Coordinate with supervisors, engineers, and quality teams Maintain welding equipment and tools in good working condition Support production schedules and meet project deadlines Required Qualifications High school diploma or equivalent (technical certification preferred) 5+ years of experience in aluminum welding Strong expertise in TIG welding (MIG experience is a plus) Ability to weld various aluminum alloys and thicknesses Proficiency in reading and interpreting technical drawings Knowledge of welding codes and standards (AWS, ISO, or equivalent) Strong attention to detail and commitment to quality Preferred Skills & Certifications Certified Aluminum Welder (AWS or equivalent) Experience with fabrication, cutting, and forming aluminum materials Leadership or supervisory experience Knowledge of non-destructive testing (NDT) methods Ability to train and assess welding skills of team members Work Environment Manufacturing or fabrication workshop environment Requires standing for long periods and handling tools and materials Use of personal protective equipment (PPE) at all times Career Progression Welding Supervisor Fabrication Manager Quality Control Inspector

PEKO Precision Products: We Make Products That Matter PEKO is a full-service, debt-free, privately-owned contract manufacturer with over 50 years embedded in the Rochester, NY community. In collaboration with our valued business partners, we deliver new product development (NPI) strategies for product commercialization and provide solutions in the medical, industrial, defense, and renewable energy industries. Enriching life is a crucial component of what we do daily. The Opportunity: Welder Your Role: The welder is responsible for welding various sheet metal parts to both commercial, AWS and ASME standards via customer drawings. The welder will use the following processes GTAW, GMAW-S and GMAW-P on common base metals such as, but not limited to Aluminum, Stainless Steel and Cold Rolled Steel. Reports To: Welding Supervisor Essential Functions: Weld components using various techniques Follow and comply with all safety and work rules and regulations Proficiency with metal fabrication tools that are common with the Welding industry. Maintain departmental housekeeping standards Good organizational, communication and problem-solving skills Proficiently read and interpret blueprints and technical drawings Perform quality checks to ensure that fabricated metal components meet the required standards and specifications. Collaborate and work with team members to complete projects on time and according to customer requirements. Rig and lift heavy objects safely Additional duties as needed and assigned. Required Qualifications: 3+ years MIG/TIG welding experience and/or technical school or equivalent combination. Highschool, GED or equivalent is required Familiarity with AWS standards preferred Proven experience as a fabricator/welder or similar role Understanding of welding symbols Knowledge of relevant codes, standards, and safety regulations Work Authorization: US Persons PEKO Perks: Competitive Total Rewards Tuition Reimbursement (IRS Allowable pre-tax Max) 401K, Medical, Dental, Vision Flexible Spending & Health Savings Accounts Life, Short and Long-Term Disability Recognition Awards & Discretionary Benefits Our Core Values: Compassion: We care for our talented and loyal PEKO family. Safety: A commitment to providing a safe, clean, and positive workplace. Integrity: We believe in transparency, honesty, and respect for all stakeholders. Agility: We are dedicated to a financially prudent organization. Endurance: Fostering the belief that PEKO people are resilient problem-solvers impacting the future. Get a glimpse of why we are #PEKOProud: #PEKOProud - YouTube Other: This position may require you to follow other job-related instructions and to perform other job-related duties as requested or assigned, subject to all applicable state and federal laws. Duties, responsibilities, and activities may change at any time with or without notice. For more available opportunities at PEKO, please visit our website: Jobs & Career Opportunities | Rochester NY | PEKO Precision Products A reasonable estimate of the compensation range for this position is $21.00 - $29.00 per hour. The wage range for this role considers a wide range of factors when making compensation decisions including skill sets; experience and training; licensure and certifications; and other business and organizational requirements. PEKO Precision Products, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfers, leaves of absence, compensation and training.

We are seeking highly skilled Welders to join our Welding team at our Assumption facility on 1 st and 3 rd shift. Your Impact Follow required safety and work procedures. Set-up, adjust, program, and perform preventative maintenance on welding equipment and local exhaust. Use MIG welder to assemble metal products to specification, from job order and document production data at a level of output that minimizes production delays. Produce strong, penetrated welds that are smooth, non-porous and consistent. Follow required procedures and use appropriate jigs and fixtures to assist in the assembly and welding process. Utilize quality checks to meet product standards. Maintain a clean and orderly work area to 5S Standards. Implement all aspects of Grain & Protein Technologies/ GSI Assumption Lean and Quality Management systems. Other responsibilities as assigned. Your Experience and Qualifications High school diploma or GED required, technical degree or certificate in welding preferred. Previous welding experience required. Ability to use various tools including (tape measure, hand grinder, plasma cutter, acetylene torch, etc.), read blueprints and tape measure. Ability to read, write and use basic math skills (addition, subtraction, multiplication, division, fractions and angles). Strong mechanical aptitude with the ability to follow precise instructions. Ability to communicate effectively with peers, managers and across departments. Your Compensation and Benefits Expected hourly pay for this role will be $25.82+ This is dependent upon job related knowledge, experience, and skills. Benefits will include the ability to elect health care and wellness plans, dental and vision plans, flexible and virtual work options (where available), 401(k) Savings Plan with company match, paid holidays, paid time off, health savings and flexible spending accounts, reimbursement for continuing education, life insurance, and other supplemental insurance plans. We value inclusion and recognize the innovation a diverse workforce delivers to our farmers. Through our recruitment efforts, we are committed to building a team that includes a variety of experiences, backgrounds, cultures and perspectives. Join us as we bring agriculture into the future and apply now! Grain & Protein Technologies is proud to be an Equal Opportunity Employer. We maintain a drug-free workplace and perform pre-employment substance abuse testing. 1. GPT Purpose: Feeding the World Better, through high quality grain and responsibly raised protein 2. GPT Mission: Make Farmers and Agribusiness Managers more productive and more profitable 3. GPT Culture: Winning Values and Winning Behaviors that nurtures a "Winners Win" culture of excellence 4. GPT Approach: Achieve balanced and sustainable success for Employees, Customers, and Owners Grain & Protein Technologies is a leading global designer, manufacturer, and marketer of reliable, durable, and innovative equipment solutions for grain, seed, poultry, egg, and swine production. Generating $1.1 billion in annual revenue, the Company serves farmers and agribusiness managers in over 100 countries and currently operates 19 manufacturing facilities across 5 continents, employing more than 3600 people. The Company goes to market with its strong portfolio of industry leading brands - GSI, Cumberland, AP, Tecno, Cimbria, Aerotech, Reventa, and Euroemme. With its Company Purpose of "Feeding the World Better", Grain & Protein Technologies emphasizes advancing smart technologies and offering innovative technical solutions to make farmers and agribusiness managers more productive and profitable in a sustainable way.Our customers' operations are growing. So are their challenges. More grain, less labor and tighter margins. Every year is a new hurdle. Yet, every year, they weather the storm and earn a harvest. We help them protect it. GSI dries, moves, stores and monitors grain smarter. So, they can get the most from what they've worked hard to produce. Putting them in control. Powering their profit.

Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking an ASME/Hygienic Welder based out of our Spring Hope, NC office. The typical work hours are Monday thru Friday 7:00am - 5:30pm. The candidate will be responsible for: Working with the ASME and Hygienic Division. Executing ASME National Board Repairs. ASME stamped fabrication. Fitting and welding of hygienic piping systems. Perform all other additional assignments per supervisors direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Experience in GTAW, GMAW, and SMAW welding processes. Successful completion of a welding and/or skills test. Must have a great attitude and willingness to perform in a variety of scenarios. Occasional weekend work and travel is required. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.

Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking employees for our Fabrication division for our Spring Hope, NC shop. The candidate will be responsible for: Fitting and welding materials per fabrication drawings. Reading and understanding drawings. Perform all other additional assignments per supervisor or project manager's direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Minimum of 5 years of experience in fabrication. Subject to passing a welding or skills test. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************

Job Description Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking an ASME/Hygienic Welder based out of our Spring Hope, NC office. The typical work hours are Monday thru Friday 7:00am - 5:30pm. The candidate will be responsible for: Working with the ASME and Hygienic Division. Executing ASME National Board Repairs. ASME stamped fabrication. Fitting and welding of hygienic piping systems. Perform all other additional assignments per supervisors direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Experience in GTAW, GMAW, and SMAW welding processes. Successful completion of a welding and/or skills test. Must have a great attitude and willingness to perform in a variety of scenarios. Occasional weekend work and travel is required. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.

Job Description Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking employees for our Fabrication division for our Spring Hope, NC shop. The candidate will be responsible for: Fitting and welding materials per fabrication drawings. Reading and understanding drawings. Perform all other additional assignments per supervisor or project manager's direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Minimum of 5 years of experience in fabrication. Subject to passing a welding or skills test. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************

Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking a Pipe Welder/Fitter for our Spring Hope, NC Fabrication Shop. The Pipe Welder/Fitter will be responsible for: Fabricating and installing piping spools/ components of various types and sizes. Reading and understanding drawings. Perform all other additional assignments per supervisor or project manager's direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Minimum of 5 years of experience in pipe welding/fitting. Successful completion of a welding and/or skills test. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.

Job Description Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking a Pipe Welder/Fitter for our Spring Hope, NC Fabrication Shop. The Pipe Welder/Fitter will be responsible for: Fabricating and installing piping spools/ components of various types and sizes. Reading and understanding drawings. Perform all other additional assignments per supervisor or project manager's direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Minimum of 5 years of experience in pipe welding/fitting. Successful completion of a welding and/or skills test. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.

Pipe Welder Ship Repair Industry Type: Local & Non-Local Accepted Shifts: 1st & 2nd Shift Available We are seeking a qualified Pipe Welder to join our ship repair team. This position involves executing high-quality welding of piping systems in a marine/shipyard environment. The successful candidate will demonstrate compliance with rigorous fabrication, alignment, and inspection standards typical of ship repair yards. Overall Responsibilities: Interpret and work from blueprints, isometrics, piping drawings, and welding symbols to layout, fit, and weld pipe systems (including carbon steel, stainless steel, copper-nickel, other alloys). Perform TIG (GTAW), Stick (SMAW), and/or appropriate welding processes on pipe systems for steam, fuel, water, air, or other shipboard services. Ensure proper cutting, preparation, beveling, tack welding, root passes, fill-passes and cap welds in accordance with approved procedure specifications. Install pipe supports, brackets, hangers and anchor points; align pipe runs; fit and secure pipe sections in shipboard and shop environments. Work under marine ship-repair conditions: inside tanks, under decks, in confined or elevated spaces, on scaffolding or dry-dock settings. Comply with shipyard and marine fabrication quality and inspection standardsvisual inspections, dimensional tolerances, weld profile control, and non-destructive testing readiness. Follow all safety protocols: PPE, confined-space entry, fall protection, hot work permits, shipyard environment hazards. Requirements / Qualifications: Minimum 3 years of pipe-welding experience in a ship repair, marine fabrication or heavy industrial environment. Must be a U.S. Citizen. Must pass a written test (covering blueprint reading, pipe isometrics, welding symbols, fabrication processes) and a tack/weld test (hands-on welding assessment for pipe systems) prior to hire. Ability to interpret and apply WPS (Welding Procedure Specifications), follow weld procedure guidelines, understand acceptance criteria (e.g., weld size, penetration, reinforcement, allowable defects). Physically capable of working in shipyard conditions: lifting up to 50 lbs, climbing ladders/scaffolds, working in elevated/confined spaces, working in shipboard environments with varying lighting, overhead hazards, moisture, and noise. Familiarity with marine materials and alloys (carbon steel, stainless, copper-nickel) and their welding demands is preferred. Commitment to adhere to all PPE and shipyard safety standards; ability to maintain a clean, safe, efficient work space. Apply Today

Visioneering Story- A powerful team with a strong work ethic. Visioneering, Inc. provides the aerospace industry with high-quality conceptual design, engineering, and innovative tooling. As a full-service provider, established in 1953, we provide industry-leading organizations with totally integrated program management, design, engineering, NC machining and manufacturing. Our quality management system has been tried and tested to meet the stringent requirements of AS9100 certification. Equal Opportunity Employer Visioneering is an equal employment opportunity employer, offering equal employment opportunities to all individuals regardless of race, color, religion, sex, age, national origin, disability status, sexual orientation, protected veteran status, marital status and any other characteristic protected by law. Benefits Direct hire position, Referral Bonus Program, Job Development Training, Holiday Schedule, 401k, Flexible Spending Account, Paid Time Off, Health/Dental/Vision Insurance, Pet Insurance, Life/Disability Insurance, ADP Discounts, and MORE. Position Title: Welder Location: Auburn Hills Shifts Needed: Day or Night Days | Monday- Friday 6a-4:45p + Saturday 6a-12p Nights | Monday- Friday 4p-2:45a + Saturday 12p-6p Character of Position As a Welder, you will be responsible for managing the machines that manufacture and repair metal structures, tools, and equipment. Responsibilities * MIG and TIG weld small and large components * Assess welded surfaces, structures, and components to identify errors * Follow and enforce strict safety regulations such as wearing heat-resistant gloves, safety glasses, protective masks, and safety shoes * Monitor machinery for appropriate usage and temperature * Weld components in diverse positions (i.e., flat, vertical, and overhead positions) * Follow OSHA safety guidelines, and ITAR compliance * Other duties as assigned Skills * Ability to read blueprints in detail * Ability to identify and find specifications * Knowledge of geometric tolerances (understand and recognize all symbols) * Thorough understanding of general tolerances * Comprehend sections and views * Understand reference system * Ability to locate and read stock list on drawing * Ability to operate presses * Use of hand tools (drill motors, grinders, etc.) * Ability to saw, miter, and fit fabrications (fit and tack) Experience * TIG and MIG welding Education * High School Diploma or equivalent Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required.

Visioneering Story- A powerful team with a strong work ethic. Visioneering, Inc. provides the aerospace industry with high-quality conceptual design, engineering, and innovative tooling. As a full-service provider, established in 1953, we provide industry-leading organizations with totally integrated program management, design, engineering, NC machining and manufacturing. Our quality management system has been tried and tested to meet the stringent requirements of AS9100 certification. Equal Opportunity Employer Visioneering is an equal employment opportunity employer, offering equal employment opportunities to all individuals regardless of race, color, religion, sex, age, national origin, disability status, sexual orientation, protected veteran status, marital status and any other characteristic protected by law. Benefits Direct hire position, Referral Bonus Program, Job Development Training, Holiday Schedule, 401k, Flexible Spending Account, Paid Time Off, Health/Dental/Vision Insurance, Pet Insurance, Life/Disability Insurance, ADP Discounts, and MORE. Position Title: Welder Location: Auburn Hills Shifts Needed: Day or Night Days | Monday- Friday 6a-4:45p + Saturday 6a-12p Nights | Monday- Friday 4p-2:45a + Saturday 12p-6p Character of Position As a Welder , you will be responsible for managing the machines that manufacture and repair metal structures, tools, and equipment. Responsibilities MIG and TIG weld small and large components Assess welded surfaces, structures, and components to identify errors Follow and enforce strict safety regulations such as wearing heat-resistant gloves, safety glasses, protective masks, and safety shoes Monitor machinery for appropriate usage and temperature Weld components in diverse positions (i.e., flat, vertical, and overhead positions) Follow OSHA safety guidelines, and ITAR compliance Other duties as assigned Skills Ability to read blueprints in detail Ability to identify and find specifications Knowledge of geometric tolerances (understand and recognize all symbols) Thorough understanding of general tolerances Comprehend sections and views Understand reference system Ability to locate and read stock list on drawing Ability to operate presses Use of hand tools (drill motors, grinders, etc.) Ability to saw, miter, and fit fabrications (fit and tack) Experience TIG and MIG welding Education High School Diploma or equivalent Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required.

Job Description Visioneering Story- A powerful team with a strong work ethic. Visioneering, Inc. provides the aerospace industry with high-quality conceptual design, engineering, and innovative tooling. As a full-service provider, established in 1953, we provide industry-leading organizations with totally integrated program management, design, engineering, NC machining and manufacturing. Our quality management system has been tried and tested to meet the stringent requirements of AS9100 certification. Equal Opportunity Employer Visioneering is an equal employment opportunity employer, offering equal employment opportunities to all individuals regardless of race, color, religion, sex, age, national origin, disability status, sexual orientation, protected veteran status, marital status and any other characteristic protected by law. Benefits Direct hire position, Referral Bonus Program, Job Development Training, Holiday Schedule, 401k, Flexible Spending Account, Paid Time Off, Health/Dental/Vision Insurance, Pet Insurance, Life/Disability Insurance, ADP Discounts, and MORE. Position Title: Welder Location: Auburn Hills Shifts Needed: Day or Night Days | Monday- Friday 6a-4:45p + Saturday 6a-12p Nights | Monday- Friday 4p-2:45a + Saturday 12p-6p Character of Position As a Welder , you will be responsible for managing the machines that manufacture and repair metal structures, tools, and equipment. Responsibilities MIG and TIG weld small and large components Assess welded surfaces, structures, and components to identify errors Follow and enforce strict safety regulations such as wearing heat-resistant gloves, safety glasses, protective masks, and safety shoes Monitor machinery for appropriate usage and temperature Weld components in diverse positions (i.e., flat, vertical, and overhead positions) Follow OSHA safety guidelines, and ITAR compliance Other duties as assigned Skills Ability to read blueprints in detail Ability to identify and find specifications Knowledge of geometric tolerances (understand and recognize all symbols) Thorough understanding of general tolerances Comprehend sections and views Understand reference system Ability to locate and read stock list on drawing Ability to operate presses Use of hand tools (drill motors, grinders, etc.) Ability to saw, miter, and fit fabrications (fit and tack) Experience TIG and MIG welding Education High School Diploma or equivalent Due to the nature of work performed within our facilities, U.S. citizenship or Valid Permanent Resident status is required. Job Posted by ApplicantPro

Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking a Pipe Welder/Fitter for our Spring Hope, NC office, construction division. The Pipe Welder/Fitter will be responsible for: Fabricating and installing piping spools/ components of various types and sizes. Reading and understanding drawings. Perform all other additional assignments per supervisor or project manager's direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Minimum of 5 years of experience in pipe welding/fitting. Successful completion of a welding and/or skills test. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.

Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking a Pipe Welder/Fitter to work out of our Spring Hope, NC office. The Pipe Welder/Fitter will be responsible for: Fabricating and installing piping spools/ components of various types and sizes. Reading and understanding drawings. Perform all other additional assignments per supervisor or project manager's direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Minimum of 5 years of experience in pipe welding/fitting. Successful completion of a welding and/or skills test. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.

Job Description Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking a Pipe Welder/Fitter for our Spring Hope, NC office, construction division. The Pipe Welder/Fitter will be responsible for: Fabricating and installing piping spools/ components of various types and sizes. Reading and understanding drawings. Perform all other additional assignments per supervisor or project manager's direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Minimum of 5 years of experience in pipe welding/fitting. Successful completion of a welding and/or skills test. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.

Job Description Edwards, Inc. is a full-service industrial general contractor providing constriction, fabrication, and crane services. We are currently seeking a Pipe Welder/Fitter to work out of our Spring Hope, NC office. The Pipe Welder/Fitter will be responsible for: Fabricating and installing piping spools/ components of various types and sizes. Reading and understanding drawings. Perform all other additional assignments per supervisor or project manager's direction. Ideal Candidates Should Have: Physical requirements include, but are not limited to: Continually walk/stand on surfaces which may be even/uneven, stable/unstable, and varying compositions. Work in awkward spaces and/or positions including confined spaces and climbing. The ability to routinely lift up to 135+ lbs. Excellent hand/eye coordination, depth perception, and peripheral vision. Essential Requirements & Skills: Requirements Minimum of 5 years of experience in pipe welding/fitting. Successful completion of a welding and/or skills test. Excellent communication skills and commitment to safety. Additional Skills Valid Driver's License and a clean driving record. High School Diploma or Equivalent Bilingual Skills (English/Spanish) is a plus. Competitive Benefits Package: Health / Dental Insurance Disability Life Insurance Paid Time Off: Vacation and Holiday 401(k) with company match And more! Working conditions may be indoor or outdoor. Schedule may include overtime, overnight, and weekend work. Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Pay commensurate with experience/knowledge. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify. Application may be made in person, or an application may be completed online at ************************************ Pre-employment investigations and evaluations may include drug, physical functionality, criminal background, MVR and/or skills evaluations. Edwards, Inc. is an Equal Opportunity Employer and participates in E-Verify.