Mechanic jobs at Vencore - 871 jobs

The A&P Mechanic - Boeing 737-MAX 8 BBJ is responsible for performing high-level maintenance, inspections, troubleshooting, and repairs on the Boeing Business Jet (BBJ) MAX 8 aircraft. This position supports a VIP/ VVIP aviation environment that requires exceptional technical expertise, meticulous attention to detail, and the highest standards of safety, confidentiality, and professionalism. The ideal candidate has advanced experience with the 737-MAX platform, knowledge of BBJ-specific systems and modifications, and the ability to maintain both airframe and cabin systems to meet elevated customer expectations. Key Responsibilities Aircraft Maintenance & Repair Perform scheduled and unscheduled maintenance on the 737-MAX 8 BBJ, including A/B checks, cabin systems maintenance, and BBJ-specific modifications. Troubleshoot and repair MAX-series systems, including advanced avionics, fly-by-wire spoiler systems, LEAP-1B engines, and modernized electrical architecture. Conduct inspections and repairs on high-end interiors, cabin management systems (CMS), entertainment systems, lighting, galley equipment, and VIP-customized installations. Execute component replacements, SB/AD compliance, structural repairs, and configuration-controlled cabin changes per BBJ documentation. Support AOG recovery and rapid-response troubleshooting in remote or international locations as needed. Regulatory Compliance & Documentation Ensure all maintenance actions comply with FAA regulations, company procedures, and BBJ-specific maintenance programs. Accurately document work performed in digital maintenance tracking systems and aircraft logbooks. Review and apply Boeing AMM, BBJ CMP, SRM, IPC, WDM, and service bulletins. Coordinate with Quality Assurance for inspections, major repairs, and return-to-service authorization. Inspection, Diagnostics & Troubleshooting Perform detailed inspections of airframe, powerplant, avionics, and high-touch cabin systems unique to BBJ configuration. Utilize advanced diagnostic equipment and built-in test systems (BITE) to identify and resolve MAX 8 discrepancies. Conduct borescope inspections on LEAP-1B engines, APU troubleshooting, and avionics system evaluations. VIP Cabin, Interior & Special Systems Support Maintain and repair VIP furnishings, luxury materials, cabinetry, and premium finishes. Troubleshoot and support Cabin Management Systems (CMS), satellite communications, Wi-Fi, Blu-ray/AV systems, and aircraft internet hardware. Work closely with flight crews and cabin staff to ensure the aircraft meets VVIP standards of comfort and functionality. Safety, Quality & Operational Excellence Uphold the highest levels of safety, confidentiality, and customer service expected in VIP aviation environments. Support continuous improvement of maintenance processes, reliability programs, and long-term fleet health monitoring. Maintain a clean, organized workspace and strictly follow OSHA, company, and regulatory safety protocols. Coordinate with operations, flight crew, engineering, and supply chain for aircraft readiness and mission reliability. Required Qualifications Valid FAA Airframe & Powerplant (A&P) Certificate. 3-5+ years of experience maintaining Boeing 737 platforms, ideally the MAX series. Strong experience with: Boeing Business Jet (BBJ) interior and cabin systems LEAP-1B engines and MAX-series avionics Digital maintenance platforms (AMOS, TRAX, CMP, or equivalent) VIP cabin repairs, CMS systems, and premium interiors Ability to read and interpret Boeing technical data, BBJ CMP manuals, engineering drawings, and wiring diagrams. Capable of working in high-standards VIP or corporate aviation environments. Must possess an active Secret (or TS/SCI) security clearance or be eligible to obtain one. Preferred Qualifications Boeing 737-MAX or BBJ GenFam / Maintenance Training Certification. Prior experience with VVIP fleet operators, corporate aviation, charter, or government executive transport. FCC License, NCATT or avionics endorsements, or AET certifications. AOG experience with international travel capability. Strong understanding of cybersecurity and data sensitivity for VIP aircraft systems. This position does not offer relocation assistance; local candidates are preferred. Core Competencies Extreme attention to detail and craftsmanship High professionalism and discretion Strong troubleshooting and diagnostic capability Excellent communication and teamwork Ability to adapt in high-tempo VIP operations Customer-service mindset for VVIP standards

ASRC Federal Communications is seeking a Heavy Equipment Mechanic - Emergency Vehicle Technician (EVT) to support our Air Force customer under the ISS2 contract at Eareckson Air Station (EAS), located on Shemya Island in Alaska's Aleutian chain. This is a rotational position: employees work 3 months on-site followed by 1 month off unpaid. While on-site, housing and meals are provided, and transportation is furnished from Anchorage to EAS via government-sponsored aircraft (employees are responsible for their own travel to Anchorage). What You'll Do Perform preventive maintenance, diagnostics, and repairs on fire vehicles, heavy fire apparatus, emergency equipment, and light-to-heavy trucks (up to Class 8). Service and repair engines, transmissions, hydraulics, electrical and pneumatic systems, and fire pumps. Ensure vehicles and equipment meet DOT and NFPA standards. Respond to emergency callouts and perform field repairs in challenging conditions. Operate shop tools and heavy equipment (cranes, welders, lifts, diagnostic systems). Maintain accurate service records and manage parts/supply needs. Support the fire department fleet and assist the Vehicle Maintenance team. Physical Requirements Ability to lift/move heavy parts and work outdoors in extreme Alaskan conditions. Comfortable with climbing, crawling, and performing physical tasks daily. Willingness to live and work in a remote, rotational environment. Basic Qualifications High school diploma or GED. 5+ years as an Emergency Vehicle Technician (EVT) OR 6+ years as a vehicle mechanic with the ability to certify as an EVT. Strong knowledge of diesel engines, fire pumps, hydraulics, electrical and pneumatic systems. Familiarity with NFPA (National Fire Protection Association) standards and DOT (U.S. Department of Transportation) compliance. Must be able to pass a pre-employment physical, drug test, and fingerprinting. Ability to obtain a National Agency Check with Inquiries (NACI). Valid U.S. driver's license with acceptable driving history. U.S. citizenship required (for facility credentials). Preferred Qualifications EVT (Emergency Vehicle Technician) or ASE (National Institute for Automotive Service Excellence) certifications. Technical school training. Experience with manufacturers such as Oshkosh, Pierce, E-One, KME, Ford, International, or Freightliner. Prior overseas or remote work experience.

St. Joe Express is a family-owned, food-grade trucking company known for safety, reliability, and quality. We run well-maintained, modern equipment and put our people first - technicians here are respected, supported, and valued. Role Description You will be responsible for troubleshooting, diagnosing, and repairing tractors and food-grade tank trailers while following Standard Operating Procedures (SOPs) This role works closely with peers, the leadership team, operations, drivers, and vendors on shop-related needs Strong time management and the ability to work unsupervised are important Qualifications 1+ year experience with Class 8 equipment Strong diagnostic and troubleshooting skills Welding experience Must have own tools Valid driver's license & reliable transportation

A leading sleep technology company is seeking a mechanical/product design engineering leader in San Francisco. This role involves overseeing the development of complex electromechanical products and leading a team of engineers. Candidates must have over 10 years of experience in electromechanical systems and 2 years of management experience, with expertise in injection molding and electronics integration. This position offers significant responsibilities and collaboration with a high-performance team dedicated to innovation and excellence. #J-18808-Ljbffr

VTG is currently seeking a Production Machinery Mechanic at the Fleet Readiness Center at NAS North Island in San Diego, CA. What will you do? * The ideal candidate repairs machinery or mechanical equipment. * Work involves most of the following: examining machines and mechanical equipment to diagnose source of trouble, dismantling or partly dismantling machines and performing repairs that mainly involve the use of hand tools in scraping and fitting parts. * Responsibilities include replacing broken or defective parts with items obtained from stock, and ordering the production of a replacement part by a machine shop or sending the machine to a machine shop for major repairs. * Duties also include preparing written specifications for major repairs or for the production of parts ordered from machine shops, reassembling machines and making all necessary adjustments for operation. Do you have what it takes? * The work of a Production Machinery Mechanic requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience. Included are workers whose duties involve setting up or adjusting machines. * Minimum qualifications are the baseline for determining technical acceptability in the personnel. * Experience must be within the last five years. * All personnel must be U. S. citizens. * Individuals released from Military Service with other than "Honorable Discharges" do not meet minimum qualifications. * Ability to read and interpret data is required. * Ability to read, write, speak and understand English. * High School degree or equivalent required. * May be required to drive company and/or government owned vehicles. Must pass a driving record background check to drive vehicles. VTG's base pay range is $32.08 per hour which is a general guideline for the geographic location, work experience, education, skill level, and/or market considerations.

Full-time Description Kings III is honored to have been recognized by the Dallas Morning News as a Top 100 Workplace in Dallas and on the national scale for Top Workplaces USA. Results are solely based on survey responses from our team members and we are proud to have ranked in the top 5% for multiple culture drivers including clued-in employees, supportive managers, strong values, meaningful work, leaders-in-the-know, employee appreciation and cross-team cooperation. Watch our video Kings III Emergency Communications is a leading provider of emergency telephones nationwide for elevators, parking garages, public/commercial swimming pools, etc. Our solutions include installation, monitoring, and maintenance. Our phones provide a communication solution when emergencies arise. Kings III Emergency Communications has a rich 30-plus year history in the life safety business, so we understand that our products must work when needed. Most important to our employees and our customers alike is that we stand behind what we sell and service. If there is a problem, we fix it, period. We have an immediate opening for an experienced Elevator Technician. This position will install and/or service emergency phone equipment for our customers in the area market. The person in this position will work independently in the field, complete a daily assigned route, and maintain the inventory and tools on their truck. The Technician will communicate regularly with customers, field supervisors, installation coordinators, sales team members, and other stakeholders in order to gauge the scope of work and provide the full service on the first visit to the customer. The person in this position will be adaptable to work within the demands of changes in routes and work plans as needed. This position serves as the face of our company to new customers, and will need to provide quality customer service, as well as problem solving, troubleshooting, and accurate and complete work. Includes all other duties as assigned by your manager. Requirements: Two years experience installing and/or repairing elevator telephone and emergency telephone equipment High School diploma or GED Must hold current and valid Elevator Mechanic License Excellent customer service skills Excellent communication skills and the ability to relate to customers, supervisors, teammates, and installation coordinators, and other teams Ability to work independently Ability to schedule work and coordinate with customers Ability to manage installation projects and complete in a timely manner Technical fluency to work on a laptop or tablet and process electronic work orders Ability to track and maintain tools and inventory counts on truck High attention to detail and quality Professional appearance Ability to travel throughout the area, different sites, cities, or states as needed Overnight travel as needed Ability to pass a pre-employment background check, motor vehicle record check, and drug screen Physical Requirements: Kneeling several times a day - up to 10 minutes at a time Squatting repeatedly - 5-10 min at a time Walking - an average of 2 miles a day Able to lift and carry up to 50 lbs. as needed Reaching and working over your head for 3 to 5 min at a time Able to carry, climb, and perform work on a 6-foot ladder Able to work outside in heat, or cold, or inclement weather for periods of time throughout the day Company Benefits: Medical, dental, vision, life, disability insurance plans offered. 401k plan with company match. Employer paid telemedicine benefits. Eight scheduled paid holidays, plus one paid floating holiday each year. 15 days of paid time off accrued in the first year. About Our Company: At Kings III, we provide critical communication services to help people in distress. We answer the call when seconds count. We know because we've been making them count when it matters most for over 30 years. Our best-in-class emergency dispatch service helps our customers reduce risk, mitigate liability, and lower their cost, all while simultaneously allowing them to provide better care to their team members, tenants, and guests. Our primary client base includes commercial and multi-family real estate owners and property managers and the most common areas we provide emergency dispatch services are in elevators and at poolside. Our customer retention rate is amazingly high at nearly 98%. Most important to our team and our customers alike is that we stand behind what we sell and service. If there is a problem, we fix it, period. We are in the life safety business and understand our service must work when needed. More than 18% of our team has been with Kings III for 10+ years, and many of them for much longer. We care who we bring on board, and nothing matters more than keeping our company culture intact and thriving. What we do here really matters - not just for our customers and our callers, but for our team members as well. HOW we do it matters even more. Kings III Core Values: You will find our core values, listed below, deeply engrained in the fabric of the company. It's important that everyone in the business is dedicated to these values as we work to lead and grow a team of good citizens - internally and externally speaking. 1. Honesty & Integrity 2. Service to the customer above all else 3. Do what is right 4. Good enough is not good enough; pursue excellence 5. Encourage individual initiative and growth Kings III is an Equal Opportunity Employer and committed to maintaining a drug-free workplace. We do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class. #LI-DNI

Kings III is honored to have been recognized by the Dallas Morning News as a Top 100 Workplace in Dallas and on the national scale for Top Workplaces USA. Results are solely based on survey responses from our team members and we are proud to have ranked in the top 5% for multiple culture drivers including clued-in employees, supportive managers, strong values, meaningful work, leaders-in-the-know, employee appreciation and cross-team cooperation. Watch our video Kings III Emergency Communications is a leading provider of emergency telephones nationwide for elevators, parking garages, public/commercial swimming pools, etc. Our solutions include installation, monitoring, and maintenance. Our phones provide a communication solution when emergencies arise. Kings III Emergency Communications has a rich 30-plus year history in the life safety business, so we understand that our products must work when needed. Most important to our employees and our customers alike is that we stand behind what we sell and service. If there is a problem, we fix it, period. We have an immediate opening for an experienced Elevator Technician. This position will install and/or service emergency phone equipment for our customers in the area market. The person in this position will work independently in the field, complete a daily assigned route, and maintain the inventory and tools on their truck. The Technician will communicate regularly with customers, field supervisors, installation coordinators, sales team members, and other stakeholders in order to gauge the scope of work and provide the full service on the first visit to the customer. The person in this position will be adaptable to work within the demands of changes in routes and work plans as needed. This position serves as the face of our company to new customers, and will need to provide quality customer service, as well as problem solving, troubleshooting, and accurate and complete work. Includes all other duties as assigned by your manager. Requirements: * Two years experience installing and/or repairing elevator telephone and emergency telephone equipment * High School diploma or GED * Must hold current and valid Elevator Mechanic License * Excellent customer service skills * Excellent communication skills and the ability to relate to customers, supervisors, teammates, and installation coordinators, and other teams * Ability to work independently * Ability to schedule work and coordinate with customers * Ability to manage installation projects and complete in a timely manner * Technical fluency to work on a laptop or tablet and process electronic work orders * Ability to track and maintain tools and inventory counts on truck * High attention to detail and quality * Professional appearance * Ability to travel throughout the area, different sites, cities, or states as needed * Overnight travel as needed * Ability to pass a pre-employment background check, motor vehicle record check, and drug screen Physical Requirements: * Kneeling several times a day - up to 10 minutes at a time * Squatting repeatedly - 5-10 min at a time * Walking - an average of 2 miles a day * Able to lift and carry up to 50 lbs. as needed * Reaching and working over your head for 3 to 5 min at a time * Able to carry, climb, and perform work on a 6-foot ladder * Able to work outside in heat, or cold, or inclement weather for periods of time throughout the day Company Benefits: * Medical, dental, vision, life, disability insurance plans offered. * 401k plan with company match. * Employer paid telemedicine benefits. * Eight scheduled paid holidays, plus one paid floating holiday each year. * 15 days of paid time off accrued in the first year. About Our Company: At Kings III, we provide critical communication services to help people in distress. We answer the call when seconds count. We know because we've been making them count when it matters most for over 30 years. Our best-in-class emergency dispatch service helps our customers reduce risk, mitigate liability, and lower their cost, all while simultaneously allowing them to provide better care to their team members, tenants, and guests. Our primary client base includes commercial and multi-family real estate owners and property managers and the most common areas we provide emergency dispatch services are in elevators and at poolside. Our customer retention rate is amazingly high at nearly 98%. Most important to our team and our customers alike is that we stand behind what we sell and service. If there is a problem, we fix it, period. We are in the life safety business and understand our service must work when needed. More than 18% of our team has been with Kings III for 10+ years, and many of them for much longer. We care who we bring on board, and nothing matters more than keeping our company culture intact and thriving. What we do here really matters - not just for our customers and our callers, but for our team members as well. HOW we do it matters even more. Kings III Core Values: You will find our core values, listed below, deeply engrained in the fabric of the company. It's important that everyone in the business is dedicated to these values as we work to lead and grow a team of good citizens - internally and externally speaking. 1. Honesty & Integrity 2. Service to the customer above all else 3. Do what is right 4. Good enough is not good enough; pursue excellence 5. Encourage individual initiative and growth Kings III is an Equal Opportunity Employer and committed to maintaining a drug-free workplace. We do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class. #LI-DNI

will involve engineering and technical support required across several departments of the Naval Undersea Warfare Center (NUWC) Division, Keyport Washington: System Acceptance & Operational Readiness Department (Code 20): The System Acceptance & Operational Readiness Department plans, organizes, directs, and controls NUWC Division, Keyport's Test, Training and Evaluation (TT&E) of undersea warfare (USW) systems and operational readiness assessment support for acquisition and Fleet customers. Code 20 conducts system evaluation activities throughout all phases of the acquisition life cycle including technology development, system design, development, and production, and in-service readiness assessment. Undersea and Combat Systems Depot (UCSD) (Code 31): The Undersea and Combat Systems Depot (UCSD) provides repair services for mechanical, electro-mechanical, and electronics systems, assemblies, and components. The UCSD provides a continuum of expert level skills including evaluating electronic, mechanical, and electro-mechanical components for feasibility of repair, repair of items to customer specifications, reverse engineering, maintenance planning and engineering, obsolescence management, and application of new maintenance technologies. The Depot exists to ensure continuity of support often as the last resort source of repair for items abandoned by industry for business or technological reasons, past their technology lifecycle, or as an alternative supplier in cases of critical need. Rapid Prototyping and Fabrication Technology Division (Code 32): The Rapid Prototyping and Fabrication Technology Division provides engineering, production, and test services required to establish a cost effective and timely source of supply for systems, assemblies, technical data, and components of varying complexity. Code 32 also provides mitigation against obsolescence by establishing a source of supply, maintaining an organic manufacturing capability, and providing technical expertise and leadership. Leading edge technological advancement in areas related to rapid prototyping, fabrication, and custom engineered solutions (CES) are also a specialty. In-Service Engineering Department (Code 40): The In-Service Engineering Department plans, organizes, directs and controls NUWC Division, Keyport's efforts to ensure Fleet operational readiness through life-cycle support of combat and weapon systems. Code 40 provides In-Service Engineering Agent (ISEA) and other technical authority functions as assigned, including design, production, test, fielding, sustainment, and improvement modifications. Capabilities include systems engineering, Fleet technical support, lifecycle logistics, obsolescence management, and acquisition engineering support. Program responsibilities include submarine systems, Naval training systems, undersea warfare weapons and vehicles, and surface warfare systems. Products and services include commercial-off-the-shelf (COTS) integration and supportability, software development, technology refreshment, obsolescence management, advanced training systems, distance support, logistics support, direct waterfront support, information assurance (IA)/cyber security, and information systems. Code 40 also provides systems and project engineering leadership for assigned integrated warfare systems technical programs and project team leadership on traditional and non-traditional work assignments, including technology insertion of aircraft carrier and surface combat systems and air and surface ship acoustic sensors, standard equipment, COTS hardware and software, and supply agent projects. Requirements A Bachelor of Science in Mechanical Engineering or related field 2 years' experience in performing mechanical analysis (e.g. stress, thermal, hydrodynamic, and vibration) Experience creating manufacturing/assembly drawings using Autodesk or Solidworks software. Familiarity with Finite Element Analysis (FEA) Ability to create technical documentation using Microsoft Office and Adobe Acrobat software. Ability to obtain a SECRET security clearance. Customer interaction experience and great communication skills. Ability to climb shipboard ladders and lift 25 pounds Ability to travel on occasion to various naval stations to support system installation and shipchecks. Preferred Qualifications: The ideal candidate will have an understanding of military specifications and requirements, drawings and other documents used to support military systems. Equal Employment Opportunity Statement: McLaughlin Research Corporation is an Equal Opportunity and Affirmative Action Employer. It is our policy to recruit, hire, promote, and train for all positions without regard to age, race, creed, religion, national origin, gender identity, marital status, sexual orientation, family responsibilities, pregnancy, minorities, genetic information, status as a person with a disability, amnesty or status as a protected veteran, and to base all such decisions upon the individual's qualifications and ability to perform the work assigned, consistent with contractual requirements and all federal, state and, local laws. EEO is the Law: Applicants and employees are protected under Federal law from discrimination. MRC offers a competitive benefit plan to employees and their eligible family members that includes health, dental, vision, life, and disability plans, paid holidays, accrued leave, accrued vacation, 401K, profit sharing, as well as, any other state or federally required benefits. The hiring wage range is $ 32.00 to $42.00 per hour.

Job DescriptionSalary: The Journeyman Mechanical Engineer - Structural will develop innovative designs to challenging engineering problems for a wide variety of applications including but not limited to structural engineering. The Mechanical Engineer will perform as a task lead on many tasks and as an individual contributor in others. The Mechanical Engineer will develop detailed design criteria from customer requirements and use strong engineering principles and tools to develop robust and reliable solutions. Designs are expected to include hardware such as test fixtures, custom mechanical assemblies, pressure vessels, piping systems, weldments, etc. The Mechanical Engineer will regularly coordinate with engineers from other disciplines and backgrounds to ensure proper design integration. Additionally, the engineer in this role will work closely with designers and operators to ensure designed hardware is manufacturable and maintainable. The Mechanical Engineer will mentor and train junior engineers through on-the-job training and dedicated mentorship activities. Perform task lead activities to ensure proper due diligence for designs within the Mechanical Engineers responsibility. Lead and mentor junior engineers to develop strong problem solving, critical thinking, and engineering processes. Develop innovative designs for custom mechanical and structural hardware. Develop design documentation such as presentations, white papers, calculation packages, reports, etc. Perform review of design documentation from other ATS and third-party engineers. Present designs and design progress for customer review and feedback. Perform structural and possibly aerothermal, thermal-structural, and flow analysis using hand calculations or appropriate software tools to validate mechanical designs. Requirements: 5+ years of relevant experience BS in engineering or related field (equivalent experience may be accepted) Secret DoD Clearance or the ability to obtain a Secret DoD Clearance Desired experience with ANSYS or ABAQUS, RISA, Revit, CAESAR, AFT Fathom, AFT Arrow/Fathom, and MATHCAD Familiarity with CAD modelling, drawing development and GD&T Experience applying engineering codes and standards such as ASME BPVC, ASME B31.3, AISC 360-10, AWS D1.1, ASME Y14.5, etc. Note:ATS is a drug-free workplace. The unlawful manufacture, distribution, dispensing, possession, or use of a controlled substance is prohibited. All candidates who receive conditional offers of employment are subject to drug testing. In addition, ATS is an E-Verify employer. Export Control Regulations: Applicants for employment at ATS must be a U.S. citizen or national, U.S. permanent resident (i.e.current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Job DescriptionSalary: The Journeyman Mechanical Engineer Piping Systems will develop innovative designs to challenging engineering problems for a wide variety of applications including but not limited to piping systems. The Mechanical Engineer will perform as a task lead on many tasks and as an individual contributor in others. The Mechanical Engineer will develop detailed design criteria from customer requirements and use strong engineering principles and tools to develop robust and reliable solutions. Designs are expected to include hardware such as test fixtures, custom mechanical assemblies, pressure vessels, piping systems, weldments, etc. The Mechanical Engineer will regularly coordinate with engineers from other disciplines and backgrounds to ensure proper design integration. Additionally, the engineer in this role will work closely with designers and operators to ensure designed hardware is manufacturable and maintainable. The Mechanical Engineer will mentor and train junior engineers through on-the-job training and dedicated mentorship activities. Perform task lead activities to ensure proper due diligence for designs within the Mechanical Engineers responsibility Lead and mentor junior engineers to develop strong problem solving, critical thinking, engineering processes Develop innovative designs for custom mechanical and structural hardware Develop design documentation such as presentations, white papers, calculation packages, reports, etc. Perform review of design documentation from other ATS and third-party engineers Present designs and design progress for customer review and feedback Perform structural and possibly aerothermal, thermal-structural, and flow analysis using hand calculations or appropriate software tools to validate mechanical designs. Requirements: 5+ years of relevant experience BS in engineering or related field (equivalent experience may be accepted) Secret DoD Clearance or the ability to obtain a Secret DoD Clearance Desired experience with CAESAR, AFT Fathom, AFT Arrow, Smap3D, Plant 3D, ANSYS, ABAQUS, and MATHCAD Familiarity with CAD modelling, drawing development and GD&T Experience applying engineering codes and standards such as ASME BPVC, ASME B31.3, AISC 360-10, AWS D1.1, ASME Y14.5, etc. Note:ATS is a drug-free workplace. The unlawful manufacture, distribution, dispensing, possession, or use of a controlled substance is prohibited. All candidates who receive conditional offers of employment are subject to drug testing. In addition, ATS is an E-Verify employer. Export Control Regulations: Applicants for employment at ATS must be a U.S. citizen or national, U.S. permanent resident (i.e.current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Company: Boeing Aerospace Operations Our Maintenance, Repair, and Overhaul (MRO) Jacksonville and Component Operations facility is seeking General Mechanics that are motivated to support a greater cause in directly impacting military warfighter readiness by providing critical maintenance repairs and modifications for our military customers. We are proud knowing the products we return to service will strengthen global security. As a Boeing employee, you will have access to an industry leading benefits packages, employee incentive programs and educational assistance. You will also have access to many resources to inform and support your development throughout your career with us. While we work in an agile and dynamic MRO environment, your wellbeing is important to us and we strive to find a healthy work / life balance, as well as, an ethical team culture with a strong emphasis on openness, collaboration, innovation, safety, and first-time quality. The professionals chosen to fill these positions will join our MRO and Component Operations organization, working as part of a team in support of our key programs such as military commercial derivatives, fighter aircraft and aircraft component maintenance, repair, and overhaul. The candidates chosen will be responsible for adherence to established processes, accurate and timely work recording and contractual/regulatory compliance. To ensure we continue to support our customers, we are looking for skilled aircraft maintenance professionals to join our team. Successful applicants will be based in Jacksonville, Florida. Position Responsibilities: Perform efforts associated with sealing, painting, shimming, and preserving structure and systems in accordance with standard repair processes. Perform component installations, ceiling, sidewall panels, flight controls and other hydraulic components. Demonstrates the capability to read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform structural modification/repair. Use of tooling assemblies and fixtures for depot level modification and repair of structural parts. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable tensiometers, sheet metal brakes and sheers, etc. is required. The mechanic will be required to access aircraft data via computer systems and initiate on-line parts and discrepancy requests. Maintain necessary certifications, licenses and permits as required for assigned work. The candidate must be able to ascend and descend vertical work ladders, and work in confined spaces. Must be able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime. General Responsibilities: Strive for an efficient work effort in all assigned tasks Strive for First Time Quality on all assigned work Follow the guidance and direction from lead, and senior Subject Matter Experts (SME) Execute all duties while wearing required safety equipment Complete required company and specific statement of work training requirements Maintain necessary certifications, licenses and permits as required for assigned work. Demonstrate a safe work ethic Perform detailed tool inventories daily Communicate using basic computer systems including but not limited to Microsoft Office as needed to complete essential job requirements Contribute positively to our open and honest reporting culture Report all incidents and occurrences in the Boeing Safety Management System. Ensure compliance with regulatory requirements, company processes and procedures Maintain a high standard of organization and cleanliness within assigned work areas, “Clean as You Go” Contribute to continuous improvement initiatives Be flexible to ensure aircraft are delivered on time to customer Perform other duties as directed by management for the benefit of the company, program or employee(s) Can perform the above tasks with little or general supervision GFD5IB (Associate Level; Can perform the above tasks with little or general supervision) GFD5IC (Experienced Level; Can perform the above tasks with no supervision and can assist others) Basic Qualifications (Required Skills/Experience): 3+ years of experience with F/A-18 maintenance and/or modification 3+ years of experience working as an aircraft mechanic 3+ years of experience or reading and understanding engineering drawings, blueprints, schematics, and specifications Willing and able to work any shift (Must be able & willing to work various shifts and / or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays; mission requirements and / or workload may require both scheduled and unscheduled overtime) Preferred Qualifications (Desired Skills/Experience): Knowledge of general aircraft maintenance and environment processes (Human Factors, FOD control, tool control, health & safety & COSHH) Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Shift: This position is for 1st and/or 2nd shift; candidates must be able to work either shift. Pay & Benefits: At Boeing, we strive to deliver a Total Rewards package that will attract, engage, and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: Associate (GFD5IB) - $57,800 - $78,200 Experienced (GFD5IC) - $68,000 - $92,000 Language Requirements: Not Applicable Education: Not Applicable Relocation: Relocation assistance is not a negotiable benefit for this position. Export Control Requirement: This position must meet U.S. export control compliance requirements. To meet U.S. export control compliance requirements, a “U.S. Person” as defined by 22 C.F.R. §120.62 is required. “U.S. Person” includes U.S. Citizen, U.S. National, lawful permanent resident, refugee, or asylee. Safety Sensitive: This is not a Safety Sensitive Position. Security Clearance: This position requires the ability to obtain a U.S. Security Clearance for which the U.S. Government requires U.S. Citizenship. An interim and/or final U.S. Secret Clearance Post-Start is required. Visa Sponsorship: Employer will not sponsor applicants for employment visa status. Contingent Upon Award Program This position is not contingent upon program award Shift: Shift 4 (United States of America) Stay safe from recruitment fraud! The only way to apply for a position at Boeing is via our Careers website. Learn how to protect yourself from recruitment fraud - Recruitment Fraud Warning Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law. EEO is the law Boeing EEO Policy Request an Accommodation Applicant Privacy Boeing Participates in E - Verify E-Verify (English) E-Verify (Spanish) Right to Work Statement Right to Work (English) Right to Work (Spanish)

Job DescriptionSalary: The Journeyman Mechanical Engineer Piping Systems will develop innovative designs to challenging engineering problems for a wide variety of applications including but not limited to piping systems. The Mechanical Engineer will perform as a task lead on many tasks and as an individual contributor in others. The Mechanical Engineer will develop detailed design criteria from customer requirements and use strong engineering principles and tools to develop robust and reliable solutions. Designs are expected to include hardware such as test fixtures, custom mechanical assemblies, pressure vessels, piping systems, weldments, etc. The Mechanical Engineer will regularly coordinate with engineers from other disciplines and backgrounds to ensure proper design integration. Additionally, the engineer in this role will work closely with designers and operators to ensure designed hardware is manufacturable and maintainable. The Mechanical Engineer will mentor and train junior engineers through on-the-job training and dedicated mentorship activities. Perform task lead activities to ensure proper due diligence for designs within the Mechanical Engineers responsibility Lead and mentor junior engineers to develop strong problem solving, critical thinking, engineering processes Develop innovative designs for custom mechanical and structural hardware Develop design documentation such as presentations, white papers, calculation packages, reports, etc. Perform review of design documentation from other ATS and third-party engineers Present designs and design progress for customer review and feedback Perform structural and possibly aerothermal, thermal-structural, and flow analysis using hand calculations or appropriate software tools to validate mechanical designs. Requirements: 5+ years of relevant experience BS in engineering or related field (equivalent experience may be accepted) Secret DoD Clearance or the ability to obtain a Secret DoD Clearance Desired experience with CAESAR, AFT Fathom, AFT Arrow, Smap3D, Plant 3D, ANSYS, ABAQUS, and MATHCAD Familiarity with CAD modelling, drawing development and GD&T Experience applying engineering codes and standards such as ASME BPVC, ASME B31.3, AISC 360-10, AWS D1.1, ASME Y14.5, etc. Note:ATS is a drug-free workplace. The unlawful manufacture, distribution, dispensing, possession, or use of a controlled substance is prohibited. All candidates who receive conditional offers of employment are subject to drug testing. In addition, ATS is an E-Verify employer. Export Control Regulations: Applicants for employment at ATS must be a U.S. citizen or national, U.S. permanent resident (i.e.current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

Job DescriptionSalary: The Journeyman Mechanical Engineer - Structural will develop innovative designs to challenging engineering problems for a wide variety of applications including but not limited to structural engineering. The Mechanical Engineer will perform as a task lead on many tasks and as an individual contributor in others. The Mechanical Engineer will develop detailed design criteria from customer requirements and use strong engineering principles and tools to develop robust and reliable solutions. Designs are expected to include hardware such as test fixtures, custom mechanical assemblies, pressure vessels, piping systems, weldments, etc. The Mechanical Engineer will regularly coordinate with engineers from other disciplines and backgrounds to ensure proper design integration. Additionally, the engineer in this role will work closely with designers and operators to ensure designed hardware is manufacturable and maintainable. The Mechanical Engineer will mentor and train junior engineers through on-the-job training and dedicated mentorship activities. Perform task lead activities to ensure proper due diligence for designs within the Mechanical Engineers responsibility. Lead and mentor junior engineers to develop strong problem solving, critical thinking, and engineering processes. Develop innovative designs for custom mechanical and structural hardware. Develop design documentation such as presentations, white papers, calculation packages, reports, etc. Perform review of design documentation from other ATS and third-party engineers. Present designs and design progress for customer review and feedback. Perform structural and possibly aerothermal, thermal-structural, and flow analysis using hand calculations or appropriate software tools to validate mechanical designs. Requirements: 5+ years of relevant experience BS in engineering or related field (equivalent experience may be accepted) Secret DoD Clearance or the ability to obtain a Secret DoD Clearance Desired experience with ANSYS or ABAQUS, RISA, Revit, CAESAR, AFT Fathom, AFT Arrow/Fathom, and MATHCAD Familiarity with CAD modelling, drawing development and GD&T Experience applying engineering codes and standards such as ASME BPVC, ASME B31.3, AISC 360-10, AWS D1.1, ASME Y14.5, etc. Note:ATS is a drug-free workplace. The unlawful manufacture, distribution, dispensing, possession, or use of a controlled substance is prohibited. All candidates who receive conditional offers of employment are subject to drug testing. In addition, ATS is an E-Verify employer. Export Control Regulations: Applicants for employment at ATS must be a U.S. citizen or national, U.S. permanent resident (i.e.current Green Card holder), or lawfully admitted into the U.S. as a refugee or granted asylum.

This job is with Encode, Inc a fully owned subsidiary of Lancesoft •Perform connector terminations including shielded wires, coaxial cables, and fiber optic wiring •Ability and understanding of routing instructions and handling of harnesses. •Perform sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes •Read and interpret engineering drawings, technical orders, process specification, and retrofit requirements to perform electrical modifications and repairs •Use tooling assemblies and fixtures for depot level modification and repair of electrical wiring •Perform assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft •Troubleshoot organizational and depot maintenance level malfunctions in aircraft electrical and comms/nav-systems •Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc... •Use all equipment in accordance with established safety and operating procedures. •Perform all tasks involved in the coordination, preparation, and movement of material and tools •Operate riding type electric powered elevating equipment to accomplish work assignments •Maintain necessary certifications, licenses and permits as required for assigned work. •Perform all duties of lower Electrical classifications as required to successfully accomplish assignments Ability to perform the following requirements: •The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds. •Exposure to noise, working on elevated platforms •Use personal protective gear for face, eyes, ears, hand, and arms as required. •Pass visual acuity and color perception tests •Read, write, and comprehend the English language •Handle, use, and dispose of hazardous material •Obtain & maintain training certifications as required to support assignment responsibilities •Occasional (1 to 3 hrs) finger manipulation •On occasion, a 2-person lift may be necessary for weights greater than 50 lbs •Frequent reaching overhead (3 to 6 hrs) •Frequent walking on flat surfaces •Frequent standing flat or uneven surfaces •Frequent balancing on a ladder, steps, or uneven surfaces •Occasional climbing on 3-12 ft ladders or stands •Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls for an extended period of time •Occasional contact with metals •Frequent exposure to noise Basic Qualifications (Required Skills/Experience): •10+ years of experience with electrical/electronic theories and avionics systems, shop mathematics and practices •10+ years of experience in working with schematics, specifications, assembly drawings and standard operating procedures. •10+ years of experience with component and wire installation to include repairing, modifying, testing and troubleshooting new, experimental, and disturbed systems •Experience with fabricating new wire bundles •Experience with routing and installing wire bundles on airplanes without existing wiring (commercial routing experience preferred) •Ability to work variable shifts including weekends and overtime Preferred Qualifications (Desired Skills/Experience): •Experience with Avionics •Experience with Depot Level/Modification maintenance. •Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment •FAA certification in Airframe and/or Power Plant

Performs on and off aircraft electrical modification to electrical wiring and system components Perform complex connector terminations including shielded wires, coaxial cables and fiber optic wiring. Understand wire handling and routing instructions. Perform sealing, wrapping, bonding, tying, and closure of wire harnesses and cables in accordance with standard processes. Demonstrate technical ability to read and interpret engineering drawings, technical orders, process specifications, and retrofit requirements to perform electrical modification/repair. Adhere to government and company procedural guidance, perform assembly, installation, visual inspection of physical characteristics, modification of wire bundles & electrical assemblies, operational and quality checks of aircraft work. Troubleshoot malfunctions in aircraft electrical and environmental systems of moderate difficulty at the organizational or depot maintenance level. Performs aircraft bench and/or flight line operational testing and troubleshooting in accordance with DOD, manufacturer, company, supplier and other directives. Performs assembly, installation, check-out physical characteristics, operational testing and modification of wire bundles in the testing, development and modification of aircraft in accordance with DOD, manufacturer, company, supplier and other directives. Responsible for the proper performance of assignments and the prudent handling of product, tools and equipment. Required to consult with management and peers to assess best work process. Will assist and train less senior employees. May be required to lead teams through more complex aircraft relevant tasks. Able to prioritize workload to maintain schedules on assigned projects. Perform all duties of lower Electrics classifications as required to successfully accomplish assignments. Interpret standard work instructions, charts, tables, blueprints, wire diagrams, formulas, sketches, verbal and electronic orders, job layouts, etc. To accomplish assigned work. Ensure that all equipment is used in accordance with established safety and operating procedures. Diagnose and correct malfunctions occurring in assembly processes. Use any and all precision measuring instruments, gauges, tools, etc., necessary to check dimensions and conformance to quality requirements. Maintain necessary certifications, licenses and permits as required for assigned work. Able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds. Able to work various shifts and/or an alternate baseline schedule that may frequently change to support mission requirements and may include weekends and holidays. Mission requirements and/or workload may require both scheduled and unscheduled overtime Must be familiar with Hazardous Energy and Lock Out /Tag systems applications to ensure working environment is deemed safe for access and on the job performance. Will be required to assist other team members (General Mechanics, Structures, Avionics) in order to ensure cost/schedule targets are met. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at San Antonio. Candidate maybe be required to travel up to 25%. This position requires the ability to pass assessment during the training cycle. This position requires adherence to the SA Tool and FOD procedures. Ability to perform the following physical requirements: The candidate must be able to ascend and descend vertical work ladders, work in confined spaces, and lift loads of approximately 35 pounds. Exposure to noise, working on elevated platforms Use personal protective gear for face, eyes, ears, hand, and arms as required. Pass visual acuity and color perception tests Experience understanding and interpreting detailed written and verbal work instructions and processes Handle, use, and dispose of hazardous material Obtain & maintain training certifications as required to support assignment responsibilities Occasional (1 to 3 hrs) finger manipulation On occasion, a 2-person lift may be necessary for weights greater than 50 lbs Frequent reaching overhead (3 to 6 hrs) Frequent walking on flat surfaces Frequent standing flat or uneven surfaces Frequent balancing on a ladder, steps, or uneven surfaces Occasional climbing on 3-12 ft ladders or stands Rotation of head/neck, sitting, crawling, squatting, bend/stoop, lying down, and operate foot controls for an extended period of time Occasional contact with metals Frequent exposure to noise BASIC QUALIFICATIONS (REQUIRED SKILLS/EXPERIENCE): Position requires 4+ years of experience in those duties as previously described for satisfactory performance. Position requires 4+ years of experience/knowledgeable in electrical/electronic theories and systems sufficient to perform assigned duties. Experience with fabricating new wire bundles Experience with routing and installing wire bundles on airplanes without existing wiring (commercial routing experience preferred) Ability to work rotating shift (1st, 2nd or 3rd) PREFERRED QUALIFICATIONS (DESIRED SKILLS/EXPERIENCE): Experience with Depot Level/Modification maintenance. Operate a forklift, mobile crane, and riding type electric powered elevating equipment to accomplish work assignment.

About Us When you work at Chugach Government Solutions (CGS), you join a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, CGS has been supporting critical missions as a government contractor for over 25 years. Our focus is to support facility maintenance, IT/technical services, construction and education. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. At CGS, empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Chugach Government Solutions may be the right fit for you! Job Overview The Fuel Distribution System Mechanic receives, stores, transfers, logs fuel data. The Mechanic may inspect and assist with the repair of pipelines, hoses and other connecting systems. The Mechanic will gauge tanks for water, temperature and fuel levels, check pumping systems for correct operating pressure or unusual noises and perform preventative maintenance and repairs on assigned systems. Pay Rate: $32.52/hourly Work Model: Onsite/Office-based Responsibilities Essential Duties & Job Functions: * Observes and interprets readings on gauges, meters, and charts which register various aspects of fuel maintenance and delivery operations. * Adjusts controls to insure safe and efficient operation and to meet demands for fuel. * Cleans strainers, filters, fuel tanks and distribution lines removing corrosion and re-painting surfaces. * Lubricates pumps, and replaces gaskets, seals, and fuel filters as needed. * Corrects pumping misalignment and makes repairs to equipment; following prescribed methods. * Inspects and diagnoses problems to determine corrective repairs. * Completes all job-related paperwork and forms. * Uses a variety of hand tools, portable power tools, and standard measuring instruments. * Coordinates with other personnel in the identification of proper and correct materials, parts assemblies, and requirements for a variety of requisitions necessary for the job/task. * Performs on call, preventive and emergency site maintenance, as necessary. * Performs periodic stock inventories and prepares material requisitions. * Operates Government or company-owned motor vehicles and/or other equipment. * Supports and assists other department staff and trade groups as needed or directed. * Adheres to the established CFS safety and personnel policies and standard operating procedures. * Ability to work overtime as needed. * Performs other duties as assigned. Job Requirements Mandatory: * High school graduate or equivalent GED. * Five (5) years of experience in operation of fuel distribution systems including delivery, repair and maintenance. * Hold or obtain a Class A and B Fuel Certification (Underground Storage Tank - UST) within 90 days. * Ability to pass pre-hire background and drug screen. * U.S. Citizenship. * Ability to obtain and maintain the required intelligence community level clearance. * Valid state driver's license and suitable driving record. * Ability to lift 50 pounds and team lift 75 pounds. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any if its subsidiaries, please email ****************** Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status, or other characteristics protected by law.

The Ultra Care Technician I is responsible for performing regularly scheduled maintenance of industrial batteries and related products at the client site. Responsibilities: Represents the company in a neat and professional manner in accordance with company standards. Practices safety and good housekeeping in all circumstances. Performs battery inspections, battery watering, battery washing, and full-scale inspection including recording of cell voltages and specific gravities. Performs watering system installations. Conveys information to proper customer contacts. Safely operates a service vehicle and keeps it in good working order. Operates a forklift and reach truck on a regular basis. Recognizes and addresses safety and EPA issues. Safely and correctly processes non-potable water recovered by the battery wash. Tests for and analyzes results of acidity level of water (pH). Performs voltage testing and pressure washing of battery. Maintains an accurate assigned parts inventory. Actively promotes point of sale items and allied products and services. Follows assigned schedule to ensure regular product maintenance. Complies with company policies and procedures (regarding issues such as warranty, safety, environmental, OSHA, and hazmat). Ensures work orders are filled out properly and submitted in a timely manner. Establishes and maintains good working relationships with customers. Communicates with others (supervisor, company technicians or other departments, as needed), to coordinate necessary repairs or either resolve customer complaints or seize opportunities. Limited overnight travel approximately every other week (1-2 nights) All other duties as required. Skills / Other: Able to read and comprehend documents, such as safety rules, operating and maintenance instructions, plus procedural and technical manuals. Able to interpret and follow instructions (provided in written, oral, diagram, or schedule form). Able to prioritize work, work independently, and move from task to task. Analytical and critical thinker. Detail-oriented. Troubleshooting skills, able to define problems and solve them. Strong customer service skills, including active listening. Solid organizational skills. Deadline-driven, self-motivated. Education/ Training: High School graduate or equivalent, required. Associate's degree in a technical area, or equivalent combination of work experience and education, preferred. Basic knowledge of Microsoft Office (Word, Excel, and Outlook) and the internet. Able to operate communications equipment in a mobile environment (cellphone, laptop, etc.). Working knowledge of standard shop tools. Forklift certified, have or will train. Reach truck operation, experienced or will train. Safety training for Spill Containment and Lead Level. FRED electrical training will be provided. Basic charger training (industrial batteries and their chargers, DC cables and displays) will be provided. Clean and current Driver's license (MVR check) in the applying State. Basic understanding of electricity/electronics. Has the experience and ability to safely complete all tasks of a Shop Technician III without supervision. Experience: 1-3 Years of experience involving battery industry or related experience, preferably within a field service environment. Prior sales or customer service in a field service environment, strongly preferred. Compensation: $18/hr DOE

Details: SummaryThe Ultra Care Technician is responsible for watering, cleaning, conducting minor repairs, and maintain electric batteries and battery chargers in a timely and efficient manner while providing outstanding customer service. Applicant will be working with little to no direct supervision therefore, needs to demonstrate honesty, dependability, time management, and critical decision making abilities. Work Schedule: Monday-Thursday (4-10 schedule) Details: Responsibilities: To perform this job successfully an individual must be able perform each duty: Ensure work orders are properly filled out Convey all information in an intelligent and professional manner to the proper contact at the customer's location to ensure customer satisfaction Operate a company vehicle, keep in good working order, and maintain accountability for vehicle's inventory Operate company vehicles in a safe and courteous manner while commuting. Ensure and maintain outstanding communication with Service and Management on any customer related issues Maintain and account for all company assigned property Maintain and keep valid drivers license and record clean Ability to operate a fork lift or pallet jack Practice safety and good housekeeping practices at customer site while representing Motive Energy. Represent Motive Energy in an a professional manner in accordance with company Standards. PPE is required and will be provided Experience with shop and hand tools Forklift experience and or certification Ability to define problems and draw valid conclusions on the repairs that need to be performed Critical thinking, troubleshooting skills, and decision making ability Ability to deal with difficult situations and maintain positive attitude Ability to prioritize and multi task between service calls Must be detail oriented when conducting administrative tasks and paperwork Pays $22.50/hour

For more than 30 years, ERC has been delivering the advantage needed to solve our customers' and the nation's toughest challenges. ERC is a trusted partner to the Defense and Space communities. We provide the advanced engineering, innovative technology, and subject-matter expertise to deliver the mission results our customers need to keep the nation safe and secure. Our unique solutions enhance readiness, optimize performance, and help ensure success in the air, on the ground and in space. An essential part of our success is our corporate culture built on respect, empowerment, and collaboration. Our culture elevates our people, ensuring they provide best-in-class service and solutions to our customers. We always strive to do the right thing. We believe that are our people are our best asset and human connection our greatest strength. Check us out on ERC.US Your role: In your role as a Warehouse Aircraft Technical Inspector, you will serve as team member responsible for assessing the serviceability and condition of various aviation components IAW Army Regulations, Technical Manuals, policies, and procedures. As a member of a warehouse team, you will use your experience and knowledge to ensure condition accuracy, traceability, and asset accountability across a range of activities associated with supply chain management. Your position will report to the Quality Lead and is a part of a multi team effort to support multiple customer requirements. What you'll do all day: Processes the technical experience to supervise subordinate mechanics and provide technical guidance on maintenance operations on the airframe being supported. A person in this position maintains repairs and modifies aircraft structures, structural components and engines of complex to extreme difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems and mechanical components, and applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies technical expertise in restoring equipment condition and operation. This worker also applies professional technical expertise and guidance to solve complex problems by interpreting technical data such as blueprints or manufactures' manuals. Work typically requires a thoroughly comprehensive knowledge of aircraft mechanical component troubleshooting/repair procedures and replacement of components, a thorough knowledge of aircraft sheet metal/structural modification and repair and the ability to determine functionality of non-complex electrical systems. A detailed knowledge of aircraft unique tools such as test equipment, torque wrenches, dial indicators, micrometers, cable densitometers, sheet metal brakes and sheers, etc. is required. Must possess the experience and ability to provide technical support to structural/mechanical engineers and customers alike, must possess excellent organizational skills in prioritizing workload to meet aircraft delivery schedule. Plan and conduct aircraft components technical inspections. Understands the fundamentals and inspection techniques of general aviation maintenance. Performs troubleshooting and analyze electrical/electronic systems. Provide technical guidance to repairers performing aircraft components and subsystem maintenance on maintenance techniques and safety procedures. You will love this job if you: Are a self-starter and require little oversight to complete given tasks? Enjoy a fast-paced work environment. Love working with diverse groups of individuals, including engineers and technicians. Are good at communicating with people. Have a positive attitude. Enjoy multitasking. Minimum requirements for this position: High School diploma or equivalent 6 years' experience as a Lead Aviation Mechanic. Must be able to obtain and maintain a Secret Clearance (U.S. Citizenship is required for all applicants) What we offer: Competitive salaries. Continuing education assistance. Professional development allotment. Multiple healthcare benefit packages. 401K with employer matching. Paid time off (PTO) along with federally recognized holiday schedule.