Welder jobs at Vermeer - 267 jobs

Fabricate and assemble parts through the use of welders, cutters, shapers and measuring tools Essential Duties and Responsibilities: TIG weld thin gauge aluminum, stainless steel, and Inconel based on specifications of the blueprints and or/drawings Set up welding jobs based on the work specifications at hand Read and interpret blueprints and/or drawings to determine the specific welding requirements Ensure work is done safely and meets quality standards. Must be able to perform their own fit-ups on units they are building Must be comfortable using air powered tools such as die grinders, cut-off tools, belt sanders, and air drills Must be able to comprehend manuals and blueprints Must be able to read calipers and other measuring equipment Observes all safety and security procedures. Uses equipment and materials properly. Reports potentially unsafe conditions. Education: High School Diploma or GED Experience: Minimum 2 years of experience in TIG Welding. Welding of Aerospace parts preferred Experience welding Stainless, Aluminum and Inconel Experience with performing own fit ups Proven ability to read and interpret blueprints Experience welding to AWS D17.1 preferred Qualifications: Must pass weld test for appearance, penetration, bend, and x-ray on aluminum and stainless steel Strong troubleshooting knowledge down to component level using measuring gauges and test equipment. Strong ethical work habits. Ability to work well under pressure and meet deadlines. Ability to interact in a positive and professional manner and to develop and maintain strong working relationships with co-workers, supervisor, vendors, and customers. Strong attention to detail and focus on quality and accuracy Typical Working Conditions: Work will be conducted mostly indoors in a "shop" type environment. Exposure to heat or cold will mostly be limited to when walking outdoors or if bay doors have been opened to allow for shipping and receiving activities. The use of PPE such as safety glasses and safety toed shoes are required in designated working areas Essential Physical Tasks: Must be performed with or without reasonable accommodation. While performing the duties of this job, the employee is regularly required to walk and talk or hear. The employee frequently is required to stand; use hands to handle or feel; and reach with hands and arms. The employee is occasionally required to sit. The employee may regularly lift and/or move up to 50 pounds and occasionally lift and/or move up to 50 pounds including the use of pneumatic and manual lifting devices. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Other: Due to contracts with the United States Government, the candidate must be either Travel: 0% Relocation is not available for this position Compensation Employee Type: Hourly Salary Minimum: $55,000 Salary Maximum: $65,000 Incentive: No Disclaimer: Where a specific pay range is noted, it is a good faith estimate at the time of this posting. The actual salary offered will be based on experience, skills, qualifications, market / business considerations, and geographic location. For more information on AMETEK's competitive benefits, please click here. AMETEK, Inc. is a leading global provider of industrial technology solutions serving a diverse set of attractive niche markets with annual sales over $7.0 billion. AMETEK is committed to making a safer, sustainable, and more productive world a reality. We use differentiated technology solutions to solve our customers' most complex challenges. We employ 21,000 colleagues, in 35 countries, that are grounded by our core values: Ethics and Integrity, Respect for the Individual, Inclusion, Teamwork, and Social Responsibility. AMETEK (NYSE:AME) is a component of the S&P 500. Visit ************** for more information. We are an Equal Opportunity Employer and do not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state or local protected class. Individuals who need a reasonable accommodation because of a disability for any part of the employment process should call 1 (866) ###-####. Nearest Major Market: Tulsa Nearest Secondary Market: Oklahoma

SUMMARY Welding of various pre-fitted assemblies for Columbia-class submarines, Virginia-class submarines, Gerald R. Ford-class aircraft carriers, and associated fixtures. Work is performed in accordance with NAVSEA and/or AWS D1.1 specifications. ESSENTIAL DUTIES AND RESPONSIBILITIES Include the following. Other duties may be assigned. Weld proficiently in all positions with minimal defects. Determine the correct equipment to use and method based on the requirements. Basic welding machine setup and troubleshooting. Ability to read and interpret welding symbols. Basic knowledge of grinding, gouging, and weld repair. Ability to always stay focused and on-task. Complete jobs within budget and timeline. Accept constructive criticism, apply lessons learned, and consistently show improvement in all areas. Familiar and complies with all safety requirements and protocols for working in a hazardous environment. Performs other related duties as assigned. Requirements KNOWLEDGE, SKILLS, AND ABILITIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily/meeting expectations. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Successful completion of 7 weld tests: FCAW (2G, 3G, and 4G); GWAW-Pulsed (2G, 3G, and 4G); GMAW-Spray (2G). Successful completion of Pegasus Welder Workmanship Training (WWT). Successful completion of Pegasus Welder I Performance Qualification Standards within 90 days of hire. EDUCATION and/or EXPERIENCE High school diploma or GED. Successful completion of an accredited trade school welding program or equivalent; or 2-years demonstrated practical AWS D1.1 welding experience; or a comparable combination of education and experience. LANGUAGE SKILLS Ability to read, analyze, and interpret common scientific and technical journals, quality manuals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to effectively present information to top management and customer's top management. MATHEMATICAL SKILLS Ability to apply advanced mathematical concepts and operations to such tasks as frequency distribution, determination of test reliability and validity, analysis of variance, correlation techniques, sampling theory, and factor analysis, etc. REASONING ABILITY Ability to define problems, collect data, establish facts, and draw valid conclusions. Ability to interpret an extensive variety of technical instructions in mathematical or diagram form and deal with several abstract and concrete variables. CERTIFICATES, LICENSES, REGISTRATIONS Welding Certification from an accredited welding training program or technical program preferred. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, and walk, occasionally stoop, kneel and/or climb; use hands to finger, handle, or feel; reach with hands and arms; and talk and hear. Ability to identify colors and make fine visual discrimination; ability to make fine judgment of texture. Ability to remember verbal and written instructions over a period of a few minutes to several days. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Exposure is frequent to moving mechanical parts, airborne particles - eye protection is required, and fumes, machine vibration, and noisy conditions, high temperatures, and occasional to a restricted space work area. EEO STATEMENT Keel provides equal employment opportunities (EEO) to all team members and applicants for employment without regard to race, (including traits historically associated with race such as hair texture and protective hairstyles), color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, service in the uniformed services, status as a protected veteran or spouse thereof, height, weight, marital or familial status, disability, or any other characteristic protected by law. In addition to federal law requirements, Keel complies with applicable state and local laws governing nondiscrimination in employment in every location in which Keel has facilities. To provide equal employment and advancement opportunities to all individuals, employment decisions at Keel will be based on merit, qualifications, and abilities. This policy applies to all terms and conditions of employment, including recruitment, recruitment advertising, hiring, job assignment, promotion, demotion, discipline, termination, layoff, recall, transfer, leaves of absence, compensation, or rates of pay, benefits, and selection for training. Provisions in applicable laws providing for bona fide occupational qualifications, business necessity or age limitations will be adhered to by Keel where appropriate.

We are looking for skilled Welders and/or Fitters (knowledge of both is a plus) to cut and join metals and other materials at our York, SC facility. Essential Job Functions 1. Perform FCAW (2G) welding. Be able to pass 2G test in FCAW on 1" thick coupon. Be able to pass 2G test in SMAW group 4 electrodes on 3/8" coupon. 2. Operate air arc to remove steel (back gouging). 3. Grind with 90° angle grinder. 4. Operate pendent controlled bridge crane safely and efficiently. 5. Read weld symbols and check weld size using weld fillet gauges. 6. Heat material to required temperature using temperature sticks and heating torch/cutting torch. (read and follow pre-heart & interpass temperature tables.) 7. Set machines according to procedure charts. 8. Use air chipper to chip of slag. 9. Use natural gas tube heaters to pre-heat steel. 10. Operate stud welder. 11. Follow weld procedures as it applies to volts, amps & wire feed speed. 12. Heat, straighten and be able to know when to use pre-heat to offset distortion. 13. Meet requirement of Class "C" and "B" welders with greater efficiency. 14. Perform other duties as required by management. Qualifications and Requirements Required: High school education or equivalent. Must be able to lift a minimum of 50 lbs. over shoulder height. Be able to read blueprints. FCAW (2G) SMAW (2G). Be able to read weld symbols and be familiar with weld procedures. Must be familiar with WP1 (manual shielded metal arc welding of carbon steel) and WP2 (Flux cored are welding of carbon steel) and WP3 (Flux cored arc welding with gas shielding of carbon steel). Preferred: Two or more years' experience in manufacturing in the steel fabrication industry. Proficiency and use of Software, equipment, machines, tools, electronic device necessary for job: Air arc, 90° angle grinder, crane, heating torch, cutting torch.

Eaton's ES AMER ESS division is currently seeking a Welder- 2nd Shift. is $20.83 per hour. Please note the salary information shown above is a general guideline only. Salaries are based upon candidate skills, experience, and qualifications, as well as market and business considerations. What you'll do: The Welder is responsible for operating Robotic Welders and Tangent Bender in accordance with SOP/VOP to assure a quality product is received by our customers. The Welder is also responsible for welding various metal joints and intersections of steel, aluminum, and stainless steel together. They will weld racks, blocks, and other miscellaneous items as needed. Both TIG and MIG wire feed welding is utilized. The Welder needs knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints, drawings, and models. Provide prompt and efficient service with emphasis on quality of work. Work from list of catalog numbers and various reports. Use welding equipment as well as material handling equipment, such as pallet jacks, overhead hoist, and an assortment of air and common hand tools. Attend LOTO and General Electrical Safety Training each year. Work Safely to prevent on-the-job injuries. Report on-the-job injuries and unsafe acts or conditions to the Supervisor. Making what matters work at Eaton takes the passion of every employee around the world. We create an environment where creativity, invention and discovery become reality, each and every day. It's where bold, bright professionals like you can reach your full potential-and where you can help us reach ours. You will work in Bottom Weld, Tangent Bender and Cover Weld areas You will operate Welding Robot Work Cell - Fanuc Robot ARC Mate model 100i, ArcTool Software, and System R-J2 Controller You will start-up, change over, and shutdown robot weld operations and tangent bender operations You will teach robot when changes to tank sizes dictates You will obtain internal forklift Certification and Hoist/Crane training You will visually inspect welder torch and wire feeder. Clean wire feed at shift start. Review current PPE condition and replace if needed. You will operate welding equipment and make equipment adjustments as needed to maintain quality welds. You will produce a quality weld, according to our standards You will achieve daily production goals You will perform touch up welds when necessary You will train new operators when necessary Qualifications: Required (Basic) Qualifications: High school diploma or GED Welding Diploma from an accredited one-year program. *Degree must show evidence of being able to weld in the four main positions: flat, vertical, horizontal and overhead on both structured steel and pipe, as well as meeting quality standards through practical weld tests as specified by the American Welding Society and the American Society of Mechanical Engineers Codes and Requirements. The degreed program should also be able to demonstrate classes in welding processes, together with a good foundation in blueprint reading and sketching. Candidates must be legally authorized to work in the United States without Corporate Sponsorship Candidates must reside within 50 miles of Greenwood, South Carolina - no relocation will be provided for this role. We are committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job-related reasons regardless of an applicant's race, color, religion, sex, sexual orientation, gender identity, age, national origin, disability, marital status, genetic information, protected veteran status, or any other status protected by law. To request a disability-related reasonable accommodation to assist you in your job search, application, or interview process, please call us at 1-800-###-#### to discuss your specific need. Only accommodation requests will be accepted by this phone number. We know that good benefit programs are important to employees and their families. Eaton provides various Health and Welfare benefits as well as Retirement benefits, and several programs that provide for paid and unpaid time away from work. Click here for more detail: Eaton Benefits Overview. Please note that specific programs and options available to an employee may depend on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements.

Nutting Material Handling Equipment is located at: 450 Pheasant Ridge Drive, Watertown, SD. JOB TITLE: WELDER REPORTS TO: Production Supervisor / Plant Manager DEPARTMENT: Welding Work Schedule: 4 ten hour days (Mon-Thurs.) $500.00 DOLLAR SIGN ON BONUS BASIC FUNCTION: Perform, under minimum supervision, the function of lay-out, fabricating and mig welding. GENERAL JOB RESPONSIBILITIES: Interpret simple to difficult drawings, sketches and/or work from samples and instruction. Set-up and perform mig welding on items for customer products. Responsible for producing acceptable work which meets or exceeds all Quality Control Standards. Safely operate various forms of material handling equipment such as hoists, cranes, tow motors, etc. Maintain cleanliness and organization of work area. Exhibit interpersonal skills sufficient to perform as an active team member. Perform other duties as assigned or required by company management. JOB QUALIFICATIONS: Preferred but not mandatory. Must be able to obtain welding certification within six months of hiring date. Ability to read and interpret blueprints. Requires attention and care to prevent injury to self and others when performing work. Ability to use various measuring tools. 1 - 3 years welding experience preferred. PHYSICAL REQUIREMENTS: Routine stooping and bending. Occasional heavy lifting - up to 50 lbs. Ability to stand 7+ hours per day. OTHER REQUIREMENTS: Must be able to read, write and understand the English language. Demonstrate a positive and business-like attitude. Required to wear all OSHA mandated safety equipment and to adhere to all company safety practices and policies. Conduct all interactions with customers (internal and external), vendors, field sales representatives, co-workers, and supervisors in a focused, positive, courteous and respectful manner. Regular attendance is an essential element of the job. Unplanned absences have the potential to impair the operation of the department and diminish effectiveness of the company. NOTE: This job description is not intended to be all-inclusive. It represents typical duties and criteria necessary to successfully fulfill the responsibilities of the position. Other duties may berequired at the discretion of supervision or management. Nutting/Acco, Inc. is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic as outlined by federal, state, or local laws.

Working at Watlow Watlow is a global technology and manufacturing leader who provides world class engineering expertise through innovative thermal products and systems, enabling our customers to thrive. We are making a positive impact every day as our solutions enrich the lives of people everywhere. We have been providing breakthrough thermal solutions for nearly a century. Our corporate values guide us uncompromisingly to always do the right thing, continually learn and improve, respect everyone, and lead with service and humility. Working at Watlow Are you looking for an opportunity to make a great living and be part of a thriving cross functional community? Watlow is a global technology and manufacturing leader who provides world class engineering expertise through innovative thermal products and systems, enabling our customers to thrive. We are making a positive impact every day as our solutions enrich the lives of people everywhere. We have been providing breakthrough thermal solutions for nearly a century. Our corporate values guide us uncompromisingly to always do the right thing, continually learn and improve, respect everyone and lead with service and humility. About the Role The Welder role in St. Louis, MO is a challenging opportunity for an individual interested in producing a high-quality product that will be used to enrich the lives of others. This position is responsible for performing manual welding operations using equipment that may include Mig, Tig, and Plasma welders to join parts, vessels, enclosures, etc. to accepted manufacturing standards. Hours: 6:45am to 3:15pm Your Key Responsibilities Prepare materials and/or parts for welding to specifications Setup and operate equipment needed to cut, stamp, bend, form metal parts and materials for welding. May perform welding operations using spot, PAW, Mig, and Tig, welders to join parts, vessels, enclosures, etc. May use Computerized Numeric Control (CNC) plasma cutters and other electronically controlled welders to help cut and weld materials and parts. Test completed product for welding reliability and completeness. May clean, re-weld, grind and finish welding. Clean and do preventative maintenance on welding and preparation equipment as needed. Understands the specific facility (location- HAN, STL, etc) requirements for standard work Required Qualifications Basic math skills Read and comprehend measurements Ability to sit or stand for prolonged periods Ability to work individually and in teams Ability to multi-task Ability to lift a maximum of 30 pounds Desired Qualifications Preferred Two-year degree or Technical Certificate or related experience (1-3 years) Zero to three years of related work experience is preferred Demonstrated knowledge with basic computer systems Willingness to work overtime when needed Welding techniques - basic understanding and capability Welding experience in light industrial or manufacturing environment Benefits: The Watlow Total Compensation Plan The health, well-being and financial stability of you and your family is a high priority to us. The Watlow Total Rewards Plan includes competitive compensation and a full range of life and career enhancing benefits: Annual Achievement Award 401(k) plan that includes a company match on your contribution and an annual company contribution that is tied to company performance Onsite wellness clinic Wellness incentives Employee Personal Assistance Program Dental, medical, vision and short-term and long-term disability insurance Paid holidays, personal time, and vacation Parental leave Tuition reimbursement Benefits: The Watlow Total Compensation Plan The health, well-being and financial stability of you and your family is a high priority to us.The Watlow Total Rewards Plan includes competitive compensation and a full range of life and career enhancing benefits: Annual Incentive Program 401(k) plan that includes a company match on your contribution and an annual company contribution that is tied to company performance Wellness incentives Employee Personal Assistance Program Dental, medical, vision and short-term and long-term disability insurance Paid holidays, personal time, and vacation Parental leave Tuition reimbursement Diversity & Inclusion We proactively embrace diversity in all its dimensions across our company and cultivate a culture of inclusion and forward thinking that respects and reflects each team member's individual strengths, views, and experiences. Watlow takes pride in being an inclusive equal opportunity employer and considers for employment qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Please let us know confidentially if you need or require any special accommodations to participate in our recruiting process by emailing us at [email protected].

To perform various welding processes in accordance with a Welding Procedure Specification (WPS), layout, fitting, brazing, and cutting using gas and electric welding equipment. Required Skills and Abilities: Ability to perform and pass GMAW-Pulse in the 2G and 3G welding positions. Ability to perform and pass GMAW-Pulse in the 4G welding position preferred. Experience with GMAW-Spray preferred in the 2G welding position. Experience with FCAW preferred. Must have knowledge of temperature stick usage and preheat techniques. Must be able to read blueprints and understand GD&T. Minimum of five years of welding experience. Must have attention and care to prevent injury to others when performing work. Ability to work in a team environment successfully. Must perform tasks safely as instructed orally and in written format. Must have knowledge of the metric system. Ability to maneuver up to 200 lbs. independently. Ability to safely lift 50 lbs. without assistance. Ability to read measuring taps and calipers. Requirements Education and Experience: High school diploma or GED required; five years of related experience. Must become forklift and crane certified through the Pegasus Steel's internal training. Competencies: Upholds Safety & Quality Standards Embodies Esprit de Corps Relentless Customer Focus Conveys Integrity, Trust & Professionalism Executes with Excellence & Velocity Inspires Team Members Communicates Effectively Resolves Problems Elevates Those Around Them Travel Requirements: Travel required Inter-facility and training purposes as needed. Physical Requirements: May be required to stand, walk, sit, reach with hands and arms, climb or balance, stoop or kneel regularly. Lift up to 50 pounds. Work Environment: Exposure is frequent to moving mechanical parts, airborne particles - eye protection is required, and fumes, machine vibration, and noisy conditions, high temperatures, and occasional to a restricted space work area. All Keel locations are tobacco free where appropriate. Relevance and Importance to Quality Objectives: Keel is committed to continually improve effectiveness and awareness; this is communicated to all team members to ensure everyone is aware of: the quality policy relevant quality objectives their contribution to the effectiveness of the quality management system, including the benefits of improved importance the implications of not conforming with the quality management system requirements relevant quality management system documented information and changes thereto their contribution to product or service conformity their contribution to product safety the importance of ethical behavior Equal Employment Opportunity Statement Keel provides equal employment opportunities (EEO) to all team members and applicants for employment without regard to race, (including traits historically associated with race such as hair texture and protective hairstyles), color, religion, sex, sexual orientation, gender identity or expression, national origin, age, genetic information, service in the uniformed services, status as a protected veteran or spouse thereof, height, weight, marital or familial status, disability, or any other characteristic protected by law. In addition to federal law requirements, Keel complies with applicable state and local laws governing nondiscrimination in employment in every location in which Keel has facilities. To provide equal employment and advancement opportunities to all individuals, employment decisions at Keel will be based on merit, qualifications, and abilities. This policy applies to all terms and conditions of employment, including recruitment, recruitment advertising, hiring, job assignment, promotion, demotion, discipline, termination, layoff, recall, transfer, leaves of absence, compensation, or rates of pay, benefits, and selection for training. Provisions in applicable laws providing for bona fide occupational qualifications, business necessity or age limitations will be adhered to by Keel where appropriate. Management retains the right to add to, or change, the responsibilities and/or duties of this position at any time including the elimination of this position. The team member understands that his/her job description is for operational purposes and is not intended to be an employment contract. The employment relationship remains "at-will."

If you are looking for an opportunity to grow, Emerson has an exciting opportunity for you! Manufacturer of large custom-designed control valves, you will work in a dynamic and high-tech production facility based in our Marshalltown, Iowa location. Consider this an outstanding opportunity to join our skilled team dedicated to delivering outstanding service to our customers! In This Role, Your Responsibilities Will Be: Support and promote a strong safety culture. Coordinate and connect with all levels of the organization (formal and informal presentations). Support achievement of the following critical success factors: Safety, Quality, Delivery, Cost and Efficiency. Ensure all welding, heat-treating, and hard-facing is performed in accordance with qualified procedures. Participate in development and qualification of new procedures, processes, and personnel. Participate in development of capital spending plans, write and support Appropriation Requests and support implementation of new capital technology. Provide manufacturing support collaborating with Engineering, Sales and Marketing to address potential manufacturability issues related to welding. Identify and facilitate the implementation of process improvement opportunities to improve quality while growing output and efficiency. Complete root cause analysis of weld-related defects and non-conformances. Assist in development and implementation of corrective and preventive actions. Support day-to-day production activities by assisting with fabrication plans, fixturing, set ups, and scheduling strategies. Support welding personnel performance through in-process observation and training. Provide feedback and assistance to address deficiencies and improve quality and efficiency. Who You Are: You balance planning with actions. You optimally communicate in various settings: one-on-one, small and large groups, or among diverse education and position levels. You make new connections and build relationships in other areas and teams. You understand that different situations may call for different approaches. For This Role, You Will Need: Understanding of welding practices (GTAW, SMAW, and SAW etc.). Proven solid understanding of NDE practices. Proven working knowledge of heat treatment practices and requirements. Use of measurement tools and welding-specific gauges. Problem solving, data analysis, and troubleshooting. PC skills including Outlook, Excel, Word, Access, and PowerPoint. Ability to work in a team environment. Ability to provide performance-related feedback face-to-face in a productive manner. Excellent oral and written communication skills. Preferred Qualifications That Set You Apart: 5 years of hands-on welding experience in a construction or manufacturing environment using GTAW, SMAW, and SAW welding processes (at a minimum). Formal visual weld inspection training. Experience with PAW and Laser overlay welding. Experience welding carbon, alloy, and stainless steels - experience with Grade 91 CSEF steel. CWI weld inspection training. Familiarity with ASME B&PV code requirements. Our Culture & Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. Learn more about our Culture & Values. ABOUT US WHY EMERSON Our Commitment to Our People At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. Work Authorization Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. Equal Opportunity Employer Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. Accessibility Assistance or Accommodation If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: [email protected]. ABOUT EMERSON Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! No calls or agencies please.

Working at Watlow Watlow is a global technology and manufacturing leader who provides world class engineering expertise through innovative thermal products and systems, enabling our customers to thrive. We are making a positive impact every day as our solutions enrich the lives of people everywhere. We have been providing breakthrough thermal solutions for nearly a century. Our corporate values guide us uncompromisingly to always do the right thing, continually learn and improve, respect everyone, and lead with service and humility. Key Responsibilities: Prepare materials and/or parts for welding to specifications Setup and operate equipment needed to cut, stamp, bend, form metal parts and materials for welding May perform welding operations using spot, PAW, Mig, and Tig welders to join parts, vessels, enclosures, etc. May use Computerized Numeric Control (CNC) plasma cutters and other electronically controlled welders to help cut and weld materials and parts Test completed product for welding reliability and completeness. May clean, re-weld, grind and finish welding Clean and do preventative maintenance on welding and preparation equipment as needed Required Qualifications: High school diploma/GED certificate or equivalent preferred Welding certificate or welding related work experience (3-5 years) Read and comprehend measurements on tape measure Ability to sit or stand for prolonged periods Desired Qualifications: Willingness to work overtime when needed Willingness to be a cross-functional team member Ability to learn new skills and follow directions Benefits: The Watlow Total Compensation Plan The health, well-being and financial stability of you and your family is a high priority to us.The Watlow Total Rewards Plan includes competitive compensation and a full range of life and career enhancing benefits: Annual Incentive Program 401(k) plan that includes a company match on your contribution and an annual company contribution that is tied to company performance Wellness incentives Employee Personal Assistance Program Dental, medical, vision and short-term and long-term disability insurance Paid holidays, personal time, and vacation Parental leave Tuition reimbursement Diversity & Inclusion We proactively embrace diversity in all its dimensions across our company and cultivate a culture of inclusion and forward thinking that respects and reflects each team member's individual strengths, views, and experiences. Watlow takes pride in being an inclusive equal opportunity employer and considers for employment qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Please let us know confidentially if you need or require any special accommodations to participate in our recruiting process by emailing us at [email protected].

Building People that Build the World. With platforms in HVAC and Detection and Measurement, SPX Technologies builds innovative solutions that enable a safer, more efficient, sustainable world. Through our RiSE talent development framework, we Reach, Identify, Strengthen, and Engage our employees to support them in their continued development. We're a global company of problem solvers, collaborators, and innovators, and our businesses build solutions that impact the world. This opportunity is for our Electric Heat business. Electric Heat is a trusted leader in electric heating and ventilation solutions for commercial, industrial, and residential applications. Backed by the strength of ASPEQ Heating Group and Marley Engineered Products, we offer a wide range of standard and customized products through leading brands like QMark, Indeeco, Berko, and Brasch. Our portfolio includes baseboard, wall, unit, and infrared heaters, along with ceiling fans and air circulators - designed to deliver comfort, reliability, and performance. We are committed to high-quality, energy-efficient solutions that improve environments where people live and work. How you will make an Impact (Job Summary) SPX is a diverse team of unique individuals who all make an impact. As a Welder, you will perform welding operations to assemble and secure sheet metal for electrical and industrial equipment, according to engineering drawings and specifications. What you can expect in this role (Job Responsibilities) While each day brings new opportunities at SPX, your core responsibilities will be: Lays out, positions, and secures parts and assemblies according to specifications. Welds or tack welds metal parts together, using tig welding, mig welding, or spot welding equipment. Removes rough spots from workpiece, using grinder, sander, or saw. May be trained and tested to be ASME certified. What we are looking for (Experience, Knowledge, Skills, Abilities, Education) We each bring something to the table, and we are looking for someone who has: Required Experience One to three months related experience and/or training Ability to correctly read a tape measure. Ability to read engineering drawings. Knowledge of tig welding, mig welding, and spot welding equipment and techniques. Preferred Experience, Knowledge, Skills, and Abilities Tig welding, Mig welding, and stick welding certification High school diploma or general education degree (GED) Travel & Working Environment Employee is regularly required to stand; use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to walk and talk or hear. The employee is occasionally required to sit; climb or balance and stoop, kneel, crouch, or crawl. The employee must regularly lift and /or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Employee is occasionally exposed to moving mechanical parts; fumes or airborne particles; risk of electrical shock and vibration. The noise level in the work environment is usually very loud. How we live our culture Our culture is at the center of what we do and, more importantly, who we are. Our core values set a standard for how we manage ourselves, and our Leadership Model sets the standard for how we engage with each other. Whether you are an individual contributor or you lead a large team, each of us leads at SPX. What benefits do we offer? We know that the well-being of our employees is integral. Our benefits include: Generous and flexible paid time off including paid personal time off, caregiver, parental, and volunteer leave Competitive health insurance plans and 401(k) match, with benefits starting day one Competitive and performance-based compensation packages and bonus plans Educational assistance, leadership development programs, and recognition programs Our commitment to embrace diversity to build a culture of inclusion at SPX We value different backgrounds, experiences, and voices at SPX, and we are committed to challenging ourselves, openly communicating, and striving to improve every day. We believe in creating an inclusive work environment where everyone has a voice and is encouraged to realize their fullest potential. SPX is an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation or identity, national origin, age, disability, veteran status, or any other legally protected basis. ABOUT SPX SPX is a diversified, global supplier of infrastructure equipment with scalable growth platforms in heating, ventilation and air conditioning (HVAC), detection and measurement, and engineered solutions. With operations in 17 countries and approximately $1.4 billion in annual revenue, we offer a wide array of highly engineered products with strong brands. SPX TOTAL REWARDS At SPX , what's in it for our employees transcends market-competitive compensation and benefits. Our Total Rewards program also includes opportunities for employees' personal development, career growth, and recognition. These programs focus on alignment and assessment of organizational, team, and individual efforts toward achieving business results. Our development and career growth programs empower our employees to enhance their skills, develop new competencies, and pursue career goals. SPX benefits package provides choices designed to help employees manage their well-being. Our compensation programs are performance-based to recognize and reward employees who work hard, display the values and leadership practices we embrace, and deliver exceptional results. OUR VALUES Integrity Accountability Excellence Teamwork Results At SPX, our values are at the heart of everything we do. We use our values every day to help us make the right decisions. We embrace a common purpose and strive for improvement. We respect and value each other as individuals and recognize that only by working together, as a team, can we reach our full potential. We take responsibility for our actions, build strong relationships with each other and our customers, and always act ethically. Our values inspire us to achieve the high standards of quality, safety, and performance that our customers expect and deserve. WORKING AT SPX Our work environment is established on a work-life philosophy supported by policies, programs, and practices that help employees achieve success within and outside the workplace. We believe in creating an inclusive work environment where employees strive to realize their fullest potential. We are an affirmative action and equal opportunity employer committed to making selection decisions without regard to race, color, religion, sex, sexual orientation, national origin, gender identity, genetic information, age, disability, veteran status or any other legally protected basis.

Pipe Welder Combo (No Per Diem) Long Term Work Hours Mon - Fri 7:00AM - 3:30PM Must pass pre-employment physical and background Must pass Welding Test SUMMARY Combination - Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. May preheat work piece, using hand torch or heating furnace. May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

Pipe Welder Combo (No Per Diem) Long Term Work Hours Mon - Fri 7:00AM - 3:30PM Must pass pre-employment physical and background Must pass Welding Test SUMMARY Combination - Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES * Selects type and size of pipe or other related materials and equipment according to specifications. * Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. * May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. * Lays out, positions, aligns and fits components together in various body positions. * Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. * Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. * Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. * Starts power supply to produce electric current. * Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. * Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. * May manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. May preheat work piece, using hand torch or heating furnace. May cut metal plates or structural shapes. * Examines weld for bead size and other specifications. * Loads, transports and unloads material, tools, equipment and supplies. * May assist in lifting, positioning and securing of materials and work pieces during installation. * Performs minor maintenance or cleaning activities of tools and equipment. * Assists other mechanics as needed. * Respiratory protection is common and may be required. * Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. * Responsible for observing and complying with all safety and project rules. Performs other duties as required. JOB REQUIREMENTS * Work within precise limits or standards of accuracy. * Make decisions based on measurable criteria. * Apply basic mathematics to solve problems. * Plan work and select proper tools. * Visualize objects in three dimensions from plans and drawings. * Compare and see differences in the size, shape and form of lines, figures and objects. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 50% Walking 20% Sitting 30% b. Lifting 35 lb. Carrying 35 lb. Pushing 0 ft-lb. Pulling 0 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

SUMMARY Combination - Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES * Selects type and size of pipe or other related materials and equipment according to specifications. * Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. * May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. * Lays out, positions, aligns and fits components together in various body positions. * Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. * Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. * Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. * Starts power supply to produce electric current. * Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. * Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. * May manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. May preheat work piece, using hand torch or heating furnace. May cut metal plates or structural shapes. * Examines weld for bead size and other specifications. * Loads, transports and unloads material, tools, equipment and supplies. * May assist in lifting, positioning and securing of materials and work pieces during installation. * Performs minor maintenance or cleaning activities of tools and equipment. * Assists other mechanics as needed. * Respiratory protection is common and may be required. * Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. * Responsible for observing and complying with all safety and project rules. Performs other duties as required. JOB REQUIREMENTS * Work within precise limits or standards of accuracy. * Make decisions based on measurable criteria. * Apply basic mathematics to solve problems. * Plan work and select proper tools. * Visualize objects in three dimensions from plans and drawings. * Compare and see differences in the size, shape and form of lines, figures and objects. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 50% Walking 20% Sitting 30% b. Lifting 35 lb. Carrying 35 lb. Pushing 0 ft-lb. Pulling 0 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

SUMMARY Combination - Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. May preheat work piece, using hand torch or heating furnace. May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

Long Term Maintenance - (No per diem) Must pass background and Physical Must have Valid Driver's License Must pass pre employment background and physcial SUMMARY Combination - Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES * Selects type and size of pipe or other related materials and equipment according to specifications. * Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. * May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. * Lays out, positions, aligns and fits components together in various body positions. * Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. * Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. * Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. * Starts power supply to produce electric current. * Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. * Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. * May manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. May preheat work piece, using hand torch or heating furnace. May cut metal plates or structural shapes. * Examines weld for bead size and other specifications. * Loads, transports and unloads material, tools, equipment and supplies. * May assist in lifting, positioning and securing of materials and work pieces during installation. * Performs minor maintenance or cleaning activities of tools and equipment. * Assists other mechanics as needed. * Respiratory protection is common and may be required. * Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. * Responsible for observing and complying with all safety and project rules. Performs other duties as required. Brown and Root Industrial Services also offers the following: * Opportunities for advancement. * Potential career growth into NCCER certified craft program with additional benefits of increase wages * Paid holidays and vacation * Elective medical, dental, vision, and supplemental benefits are available * Supplemental medical premium contributions for qualified positions. * Immediate 401(k) program with the employer matching the employee's first 3% contribution, and 50% of the employee's next 2% (vested immediately) * Employee Quarterly incentive bonus program Work Schedule is Monday-Thursday 4 10 hour days Shift Only JOB REQUIREMENTS * Work within precise limits or standards of accuracy. * Make decisions based on measurable criteria. * Apply basic mathematics to solve problems. * Plan work and select proper tools. * Visualize objects in three dimensions from plans and drawings. * Compare and see differences in the size, shape and form of lines, figures and objects. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 50% Walking 20% Sitting 30% b. Lifting 35 lb. Carrying 35 lb. Pushing 0 ft-lb. Pulling 0 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

Long Term Maintenance No Per diem Work Hours Mon - Thurs 7:00AM - 5:30PM Must pass pre-employment background and physcil SUMMARY Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. - May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. - May repair broken or cracked parts and fill holes. - May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. - May preheat work piece, using hand torch or heating furnace. - May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. JOB REQUIREMENTS - Work within precise limits or standards of accuracy. - Make decisions based on measurable criteria. - Apply basic mathematics to solve problems. - Plan work and select proper tools. - Visualize objects in three dimensions from plans and drawings. - Compare and see differences in the size, shape and form of lines, figures and objects. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 50% Walking 20% Sitting 30% b. Lifting 35 lb. Carrying 35 lb. Pushing 0 ft-lb. Pulling 0 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

Long Term Maintenance No Per diem Work Hours Mon - Thurs 7:00AM - 5:30PM Must pass pre-employment background and physcil SUMMARY Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. - May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. - May repair broken or cracked parts and fill holes. - May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. - May preheat work piece, using hand torch or heating furnace. - May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required.

Long Term Maintenance - (No per diem) Must pass background and Physical Must have Valid Driver's License Must pass pre employment background and physcial SUMMARY Combination - Capable of certifying on multi-process pipe being proficient in SMAW, GTAW and GMAW welding processes. May require x-ray qualities. Lays out, aligns and welds fabricated, cast and forged components to assemble structural forms such as machinery frames, tanks, pressure vessels, furnace shells, buildings and pipe, according to blueprints and metallurgy. RESPONSIBILITIES - Selects type and size of pipe or other related materials and equipment according to specifications. - Selects equipment and plans layouts, assembly, and welding, applying knowledge of geometry, physical properties of metal machining, weld shrinkage and welding techniques. - May be required to use Gas-Metal Arc, Flux-Cored Arc, Gas-Tungsten Arc, Submerged Arc, or Shielded Metal Arc welding processes. - Lays out, positions, aligns and fits components together in various body positions. - Bolts, clamps and welds together metal components of products such as piping systems, plate, pipe and tube or structural shapes, using arc and arc gas welding equipment. May weld in flat, horizontal, vertical, or overhead position. May tack weld assemblies together. - Connects cable from welding unit to obtain amperage, voltage, slope and pulse as specified by procedure or supervisor. - Obtains specified electrode and inserts electrode into portable holder or threads consumable electrode wire through portable welding gun. - Starts power supply to produce electric current. - Strikes arc which generates heat to melt and deposit metal from electrode to work piece and join edges of work piece. - Manually guides electrode or gun along weld-line, maintaining length of arc and speed and movement to form specified depth of fusion and bead, as judged from color of metal, sound of weld, and size of molten puddle. - May manually apply filler rod to supply weld metal. May clean or degrease weld joint or workplace, using wire brush, portable grinder, or chemical bath. May repair broken or cracked parts and fill holes. May remove excess weld, defective weld material, slag and spatter, using carbon arc gouge, hand scrapper, grinder or power chipper. May preheat work piece, using hand torch or heating furnace. May cut metal plates or structural shapes. - Examines weld for bead size and other specifications. - Loads, transports and unloads material, tools, equipment and supplies. - May assist in lifting, positioning and securing of materials and work pieces during installation. - Performs minor maintenance or cleaning activities of tools and equipment. - Assists other mechanics as needed. - Respiratory protection is common and may be required. - Required to pass employer performance tests or standard tests to meet certification standards. Performs only procedures certified in. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. Brown and Root Industrial Services also offers the following: Opportunities for advancement. Potential career growth into NCCER certified craft program with additional benefits of increase wages Paid holidays and vacation Elective medical, dental, vision, and supplemental benefits are available Supplemental medical premium contributions for qualified positions. Immediate 401(k) program with the employer matching the employee's first 3% contribution, and 50% of the employee's next 2% (vested immediately) Employee Quarterly incentive bonus program Work Schedule is Monday-Thursday 4 10 hour days Shift Only

Job Description Here at Alcom we believe in our mission, vision, and values. Mission: To be the most influential partner in the trailer industry. Vision: To become the market leader in innovative, quality transportation solutions through an unmatched commitment to our employees and customers. Values: Customer Focus, Integrity, Problem Solving, Teamwork The Welder is responsible for performing tasks involved in the production of bases and frames of aluminum trailers. This includes measuring, cutting, and welding of aluminum. Apply in person - 2526 W. New York Ave, Deland, Fl 32720 M-Th 6:00a - 4:30p | Friday Overtime Potential Heath Insurance Dental & Vision Insurance Short-Term & Long-Term Disability Paid Holidays and Paid Vacation Paid Life Insurance 401(K) plan with 4% match FUNCTIONS AND RESPONSIBILITIES: The Welder is responsible for performing tasks involved in the production of bases and frames of aluminum trailers. This includes measuring, cutting, and welding of aluminum. Reads and follows blueprints and work orders ensuring a quality product that meets customer demands. Welds different facets of a trailer, including but not limited to: tacking, clamping, and welding with proper bead size on bases and cages in accordance with the work order; ensures quality of welds for structural integrity. Obtains raw materials from Material Handlers. Buffs out rough edges using a hand-held power grinder. Notifies supervisor of any mechanical or material issues including but not limited to, defects in material, damage to the trailer, and deviations from work order. Ensures that finished product meets quality expectations. Strives for the highest level of quality and understands the need for continuous improvement; supports the concept of “good enough is never good enough.” Maintains a clean and safe work area; works to minimize scrap, places unused material back in appropriate area, and disposes of waste appropriately. Follows all safety procedures, wears appropriate personal protective equipment (PPE), and reports any accidents or near misses to supervisor immediately. Performs other related duties and assignments as required. Requirements: •Must be able to work quickly without sacrificing quality or safety •Must have a keen understanding of manufacturing processes. •Must be able to measure and cut accurately •Must possess the ability to creatively think and solve problems •Ability to read blueprints and work orders accurately •Ability to work in a fast- paced environment •Strong time management and organizational abilities Alcom USA is proud of its diverse workforce and welcomes employees who speak one or more languages. As a necessity to safely and efficiently perform business operations, employees must be proficient in speaking and understanding English. Alcom will assess the level of fluency required on a job by job basis. Employees must be able to speak and understand English for job related communications and are otherwise welcome to speak their native or other language in the workplace. EOE