Technician jobs at Volt Systems LLC

Job DescriptionAbout Us: DataSource Technology delivers end-to-end technology deployment and network solutions to healthcare organizations across the United States. We specialize in executing high-volume, multi-site rollouts of critical IT infrastructure with precision and minimal operational disruption. Position Summary: The IT Desktop/TV Installation Technician plays a critical role in supporting large-scale technology installations within new construction environments. This is a hands-on position responsible for physically deploying, installing, and configuring a variety of technology and medical equipmentranging from computers and monitors to printers, ergonomic carts, and wall-mounted devices. This role is ideal for mechanically inclined, tech-savvy individuals who enjoy working with their hands, following structured plans, and learning the technical side of infrastructure deployment. Youll work under the guidance of a Site Lead, senior engineers or project managers while gaining the skills and certifications needed to advance into more senior technical roles. This is a remote position with 100% travel to project sites. Candidates must successfully pass a background check and drug screening, and must hold a valid drivers license. Key Responsibilities Device Deployment & Installation Install, configure, wire manage and verify operation of computers, monitors, printers, TVs, carts, and related devices. Assemble and cable ergonomic carts (e.g., Ergotron) including mounting hardware and power/data routing. Wall-mount and secure displays, monitors, and other equipment according to plans and manufacturer guidelines. Site Preparation & Coordination Stage and inventory equipment prior to installation. Coordinate with cabling teams, electricians, and other trades to ensure proper pathways and connectivity. Follow construction drawings, elevation plans, and device location maps to ensure accurate placement. Testing & Documentation Power on and test installed equipment, ensuring network connectivity and device functionality. Record serial numbers, locations, and configuration status in project tracking tools. Communicate site conditions, issues, or conflicts to the lead engineer or project manager. General Labor & Field Work Use hand and power tools safely to drill, mount, route cables, and secure equipment. Work in active construction sites, ladders, lifts, ceiling spaces, and other environments as needed. Maintain cleanliness, safety, and professionalism on job sites. Required Skills & Competencies High school diploma or equivalent (technical certifications or associate degree a plus but not required) 12 years of experience in one or more of the following: Technology or AV installation Low-voltage cabling Construction or facilities work involving mounting, wiring, or equipment setup Familiarity with basic computer hardware, network connections, and peripheral setup. Ability to read and follow floor plans, elevation drawings, and installation diagrams. Proficiency with basic hand and power tools (drills, levels, pullers, cable tools, etc.). Ability to lift 50+ lbs, work at heights, and operate safely in construction environments. Strong attention to detail, dependability, and willingness to learn. Valid drivers license and reliable transportation to job sites. Preferred Qualifications OSHA 10 or OSHA 30 Certification Basic understanding of Ethernet cabling and network testing tools Prior experience in healthcare or clinical technology deployments Familiarity with structured cabling and mounting systems (Peerless, Chief /ICW arms, etc.) What We Offer Competitive salary based on experience All travel expenses reimbursed Supportive team culture and leadership structure Opportunity to work on large-scale, high-impact technology projects in the healthcare space Physical Requirements Moderate lifting/carrying up to 50lbs.; heavier weights with assistance Sitting & standing for long periods of time Repetitive motions and/or prolonged computer use Working at a fast pace, subject to many interruptions, physical/mental demands Work is primarily based on new construction job sites, including hospitals, clinics, and commercial facilities. All work will include travel and overnight stays across the US. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Job DescriptionAbout Us: DataSource Technology delivers end-to-end technology deployment and network solutions to healthcare organizations across the United States. We specialize in executing high-volume, multi-site rollouts of critical IT infrastructure with precision and minimal operational disruption. Position Summary: The IT Desktop/TV Installation Technician plays a critical role in supporting large-scale technology installations within new construction environments. This is a hands-on position responsible for physically deploying, installing, and configuring a variety of technology and medical equipmentranging from computers and monitors to printers, ergonomic carts, and wall-mounted devices. This role is ideal for mechanically inclined, tech-savvy individuals who enjoy working with their hands, following structured plans, and learning the technical side of infrastructure deployment. Youll work under the guidance of a Site Lead, senior engineers or project managers while gaining the skills and certifications needed to advance into more senior technical roles. This is a remote position with 100% travel to project sites. Candidates must successfully pass a background check and drug screening, and must hold a valid drivers license. Key Responsibilities Device Deployment & Installation Install, configure, wire manage and verify operation of computers, monitors, printers, TVs, carts, and related devices. Assemble and cable ergonomic carts (e.g., Ergotron) including mounting hardware and power/data routing. Wall-mount and secure displays, monitors, and other equipment according to plans and manufacturer guidelines. Site Preparation & Coordination Stage and inventory equipment prior to installation. Coordinate with cabling teams, electricians, and other trades to ensure proper pathways and connectivity. Follow construction drawings, elevation plans, and device location maps to ensure accurate placement. Testing & Documentation Power on and test installed equipment, ensuring network connectivity and device functionality. Record serial numbers, locations, and configuration status in project tracking tools. Communicate site conditions, issues, or conflicts to the lead engineer or project manager. General Labor & Field Work Use hand and power tools safely to drill, mount, route cables, and secure equipment. Work in active construction sites, ladders, lifts, ceiling spaces, and other environments as needed. Maintain cleanliness, safety, and professionalism on job sites. Required Skills & Competencies High school diploma or equivalent (technical certifications or associate degree a plus but not required) 12 years of experience in one or more of the following: Technology or AV installation Low-voltage cabling Construction or facilities work involving mounting, wiring, or equipment setup Familiarity with basic computer hardware, network connections, and peripheral setup. Ability to read and follow floor plans, elevation drawings, and installation diagrams. Proficiency with basic hand and power tools (drills, levels, pullers, cable tools, etc.). Ability to lift 50+ lbs, work at heights, and operate safely in construction environments. Strong attention to detail, dependability, and willingness to learn. Valid drivers license and reliable transportation to job sites. Preferred Qualifications OSHA 10 or OSHA 30 Certification Basic understanding of Ethernet cabling and network testing tools Prior experience in healthcare or clinical technology deployments Familiarity with structured cabling and mounting systems (Peerless, Chief /ICW arms, etc.) What We Offer Competitive salary based on experience All travel expenses reimbursed Supportive team culture and leadership structure Opportunity to work on large-scale, high-impact technology projects in the healthcare space Physical Requirements Moderate lifting/carrying up to 50lbs.; heavier weights with assistance Sitting & standing for long periods of time Repetitive motions and/or prolonged computer use Working at a fast pace, subject to many interruptions, physical/mental demands Work is primarily based on new construction job sites, including hospitals, clinics, and commercial facilities. All work will include travel and overnight stays across the US. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Requirements Machine and Tools Used Ability to use and understand air tools Ability to use sockets and wrenches Box Taping Machine Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Problem Solving Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Working Hours: Hours will be 7:00 AM to 4:00 PM Monday through Friday Working Conditions/Physical Demands of the Job: Warehouse/Production: The work environment characteristics described here are representative of those typical in a warehouse environment. The noise level in the work environment is usually moderate to loud, including the sounds of forklifts and tools. The temperature in the warehouse is moderate to hot depending on the time of the year. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds. *Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Job DescriptionDescription: The Warehouse Tech is responsible for the pulling of product on a day-to-day basis. Responsible for the loading and unloading of product to and from vendors/delivery trucks. Maintain a clean and organized work area, with keeping aisles clear and labeled. Responsible for product knowledge and internal codes used to distinguish between items. Able to work as a team to get each job completed in a timely manner to ensure it gets into the production team when they require it for the next build. Requirements: Warehouse Tech Essential Functions: • Responsible for having a higher level of product knowledge • Accountable for quality control on all parts before being brought to production • Ensures all counts on parts received from a vendor, or on work orders match the quantities specified • Places all product for a specific build in the prep area • Inspect raw materials used in the production of JL Marine products • Organize the warehouse by labeling and consolidating pallets, and ensure all like parts are stored together • Maintain a clean and clear work area • Maintain inventory counts when called upon • Clear out/set-up production area to ensure parts are taken out and counted, and new product is pulled in for them to begin the next build required Educational/Experience Requirement: • Less than high school education; or up to one month related experience or training; equivalent combination. • High school diploma or GED; or 1-3 months related experience and/or training; equivalent combination, preferred Machine and Tools to be Used • Forklift • Pallet Jack Knowledge, Skills and Abilities (KSAs): • Critical Thinking-Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. • Active Listening-Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. • Monitoring-Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action. • Coordination-Adjusting actions in relation to others' actions. • Active Learning-Understanding the implications of new information for both current and future problem-solving and decision-making. • Social Perceptiveness-Being aware of others' reactions and understanding why they react as they do. • Service Orientation-Actively looking for ways to help people. • Learning Strategies-Selecting and using training/instructional methods and procedures appropriate for the situation when learning or teaching new things. • Time Management-Managing one's own time and the time of others. • Operation and Control-Controlling operations of equipment or systems. • Quality Control Analysis-Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills: Ability to calculate figures and amounts such as discounts, interest, commissions, proportions, percentages, area, circumference, and volume. Ability to apply concepts of basic algebra and geometry. Problem Solving Ability: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Computer Skills: Basic personal computer skills Working Hours: 7:00 AM to 4:00 PM Monday through Friday, with a 1 hour lunch. Working Conditions/Physical Demands of the Job: The work environment characteristics described here are representative of those typical in a warehouse environment. The noise level in the work environment is usually moderate to loud, including the sounds of forklifts and tools. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Details Job Title: Production Tech Department: Operations Reports to: Production Supervisor FLSA Status: Full-Time, Non-Exempt Our mission is to share a sense of adventure with the world through our high performance marine products while instilling and inspiring consumer confidence with superior service. Benefits 100% employer paid - Employee/family health plan option available Health Savings Account (HSA) - with generous employer matching program Dental, Vision, Voluntary Life Insurance 100% employer paid - Employee Life Insurance, Short Term and Long-Term Disability Insurance Accident, Hospital and Critical Illness 401K with generous employer matching program Paid time off Holiday pay Annual employee apparel spending allowance Employee Referral Program Summary The Production Tech tends one or more machine tools, special purpose machines, or works to specifications on production basis for assembling an entire product or components of a product to produce the highest quality product for the end user. Company Values: Exceptional Client Service - Our customers are our life blood, we treat them as the essential partners that they are by going the extra mile and putting customer needs first Innovation and Growth - Always looking to acquire new information and try new things to improve how we work Ethical Orientation - Earns the trust and confidence of coworkers and customers through honest communication, ethical behavior and professionalism in all interactions Driven & Passionate - Shows passion for improving the delivery of services with a commitment to continuous improvement Duties and Responsibilities Lifts work piece manually onto pallets or workstation for assembly. Perform quality checks on products and parts Inspects and measures machined work pieces to verify conformance to specifications. Count and assemble kits for other components. Wrap and box components. Cleans machined parts. i.e. drill table, drill press. Tends machines and equipment other than machine tools. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice Requirements: Machine and Tools Used Ability to use and understand air tools Ability to use sockets and wrenches Box Taping Machine Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs. Problem Solving Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Working Hours: Hours will be 7:00 AM to 4:00 PM Monday through Friday Working Conditions/Physical Demands of the Job: Warehouse/Production: The work environment characteristics described here are representative of those typical in a warehouse environment. The noise level in the work environment is usually moderate to loud, including the sounds of forklifts and tools. The temperature in the warehouse is moderate to hot depending on the time of the year. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. The employee must frequently lift and/or move up to 50 pounds. *Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: The Mobility Team is hiring. We are seeking an experienced ITS / Intelligent Mobility Services Market Lead to join our Traffic and ITS team in South Florida. This role will work alongside Arcadis senior leaders, managers, and engineers to lead the strategy and projects for programs and projects across South Florida. The IMS Market Lead will utilize Arcadis' strong national and international reputation to support the growth of practice, opportunities, and services provided in the Florida Transportation market. This is a hybrid position; candidate location preference is South Florida. Candidates will have the ability to work a hybrid schedule but will be required to attend internal and external client meetings in person as needed. The IMS Market Lead will sit within the larger Global Mobility Business Area. We partner with our clients across the globe to design thriving and connected cities and communities that enable opportunity for all and keep the world moving. Climate change, urbanization and digitization trends are requiring today's mobility projects and systems to address an evolving set of demands from the world's growing population. We design connected, sustainable solutions that integrate existing infrastructure with new technologies, and optimize the mobility of people and goods. Role accountabilities: As a client-facing project and people manager in transportation, the IMS Market Lead will be involved in developing relationships between potential clients and Arcadis to enhance Arcadis's opportunities in traffic and ITS in Florida. The IMS Market Lead will work alongside other senior program managers, project managers, and engineers to lead the delivery for programs and projects in Florida and across the Southeast. Role Accountabilities: * Growth: Coordinate with account leaders and regional management to lead the growth with local agencies and the FDOT district within your local market. This includes maintaining client relationships across a variety of clients, identifying and leading project pursuits, and identification of additional resources to meet future project needs. Additionally, assist regional leaders in identifying and recruiting new entry-level and experienced transportation engineers. * Operations: Work with regional and national management to develop and achieve operational performance goals and adhere to standards related to the Arcadis Way of Project Management. Additionally, you will coordinate with Department Leaders from other states across the organization to balance resources and share technical knowledge to assist in overall organizational growth. * Project Delivery: Collaborate with project managers and production team to define schedules and methodologies for local and regionally significant ITS / TSMO / Traffic Operations projects including those for public and private sector clients. Additionally, directly, and indirectly oversee technical execution of complex projects including engineering analysis, design, and operations. * Internal Campaigns/Initiatives: Assist/champion internal initiatives including those related to staff growth, strategic positioning, office operations, and global strategy. * Key Skills: Excellent verbal and written communication skills. Ability to work well in groups as well as independently. Qualifications & Experience: Required Qualifications: * 10+ years of relevant work experience * Bachelor's Degree in Engineering, Transportation Field or similar field. * Must possess a Florida PE * Must possess a U.S. Driver's License * Experience in TSMO, ITS Design or Traffic Operations * Experience with Industry leading transportation and Engineering principles. * Experience with FDOT design standards and common industry tools/software Preferred Qualifications: * Master's Degree in Transportation Engineering * Experience managing large tasks and/or projects * Experience managing projects for FDOT Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 20 days PTO that accrue per year. The salary range for this position is $136,719K - $239,259K. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. Join Arcadis. Create a Legacy. #LI-HYBRID #Mobility-NA #Mobility-US-Jobs #Traffic-ANA #LI-HA1 #IMSLead-HA

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: The Mobility Team is hiring. We are seeking an experienced ITS / Intelligent Mobility Services Market Lead to join our Traffic and ITS team in South Florida. This role will work alongside Arcadis senior leaders, managers, and engineers to lead the strategy and projects for programs and projects across South Florida. The IMS Market Lead will utilize Arcadis' strong national and international reputation to support the growth of practice, opportunities, and services provided in the Florida Transportation market. This is a hybrid position; candidate location preference is South Florida. Candidates will have the ability to work a hybrid schedule but will be required to attend internal and external client meetings in person as needed. The IMS Market Lead will sit within the larger Global Mobility Business Area. We partner with our clients across the globe to design thriving and connected cities and communities that enable opportunity for all and keep the world moving. Climate change, urbanization and digitization trends are requiring today's mobility projects and systems to address an evolving set of demands from the world's growing population. We design connected, sustainable solutions that integrate existing infrastructure with new technologies, and optimize the mobility of people and goods. Role accountabilities: As a client-facing project and people manager in transportation, the IMS Market Lead will be involved in developing relationships between potential clients and Arcadis to enhance Arcadis's opportunities in traffic and ITS in Florida. The IMS Market Lead will work alongside other senior program managers, project managers, and engineers to lead the delivery for programs and projects in Florida and across the Southeast. Role Accountabilities: Growth: Coordinate with account leaders and regional management to lead the growth with local agencies and the FDOT district within your local market. This includes maintaining client relationships across a variety of clients, identifying and leading project pursuits, and identification of additional resources to meet future project needs. Additionally, assist regional leaders in identifying and recruiting new entry-level and experienced transportation engineers. Operations: Work with regional and national management to develop and achieve operational performance goals and adhere to standards related to the Arcadis Way of Project Management. Additionally, you will coordinate with Department Leaders from other states across the organization to balance resources and share technical knowledge to assist in overall organizational growth. Project Delivery: Collaborate with project managers and production team to define schedules and methodologies for local and regionally significant ITS / TSMO / Traffic Operations projects including those for public and private sector clients. Additionally, directly, and indirectly oversee technical execution of complex projects including engineering analysis, design, and operations. Internal Campaigns/Initiatives: Assist/champion internal initiatives including those related to staff growth, strategic positioning, office operations, and global strategy. Key Skills: Excellent verbal and written communication skills. Ability to work well in groups as well as independently. Qualifications & Experience: Required Qualifications: 10+ years of relevant work experience Bachelor's Degree in Engineering, Transportation Field or similar field. Must possess a Florida PE Must possess a U.S. Driver's License Experience in TSMO, ITS Design or Traffic Operations Experience with Industry leading transportation and Engineering principles. Experience with FDOT design standards and common industry tools/software Preferred Qualifications: Master's Degree in Transportation Engineering Experience managing large tasks and/or projects Experience managing projects for FDOT Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 20 days PTO that accrue per year. The salary range for this position is $136,719K - $239,259K. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. Join Arcadis. Create a Legacy. #LI-HYBRID #Mobility-NA #Mobility-US-Jobs #Traffic-ANA #LI-HA1 #IMSLead-HA

LSI is an employee-owned company that employs dynamic teams of professionals - people with the finest technical expertise, a level of passionate creativity, and a truly visionary outlook who deliver innovative training solutions that exceed our customers' expectations. Everyone at LSI has a personal stake in our success. LSI has over 400 training support experts, engineers, and craftsmen on staff who develop state-of-the-art high-fidelity training devices, complex computer-based, highly interactive distributed learning products, and comprehensive, dynamic technical publications. LSI employee-owners collaborate to deliver training products and services for a myriad of programs and customers, using leading-edge technology and proven processes. Mission Our mission is to prepare our military and allies to be battle-ready through cutting-edge training products and services. Vision Our vision is to be the premier provider of military training solutions, renowned for our innovation and excellence. Through employee-ownership and teamwork, we will shape a future where every military service member is equipped to succeed in their mission. Guiding Principles ESOP Sustainability: We do everything within our control to meet project budgets and schedules, so our ESOP prospers. Take Ownership: Each Employee-Owner takes ownership at the individual level for their words, actions, and results. Individual ownership breeds accountability. Accountability breeds trust. When we hold ourselves accountable and trust our fellow employee-owners to do the same, we realize success. Clear Communication: We project confidence in our communication by using unambiguous language and providing clear purpose and direction. Pursuit of Excellence: We aggressively pursue continuous improvement both as teams and individual employee-owners. We strive to get better every day. There is no room for mediocrity. Pride in Our Work: We know the value of our work and are proud of what we produce. Customer Focus: Customers are both internal and external, and we strive to give both our best efforts. Assume Positive Intent: Assume others are well-intentioned in their actions and seek additional information about the circumstances to help solve problems. Assuming positive intent in all interactions is the key to building strong teams and working together to solve problems. One Voice: Every Employee-Owner is expected to speak up if they have an idea for improvement or if they disagree with a potential course of action. Once a decision is made, the entire team commits to it and moves forward with one voice. Apply: ******************************* General Summary The Subject Matter Expert (SME)-Technician/Operator I for training devices designs, develops, reviews, and tests training solutions and conducts technician or operator training for defined areas of military expertise in accordance with contractual specifications, standards, and instructions. Essential Job Functions Serves as an SME for the development and delivery of training solutions pertaining to technicians, maintainers, or operators of military platforms, systems, or weapons. Works with a team of engineering professionals to analyze, design, develop, and deliver desktop software, virtual/augmented reality simulators, and training devices. Works with a team of production and manufacturing technicians to provide technical guidance during all phases of development and implementation. Participates in training conferences, In-Process Reviews (IPRs), and other required meetings. Must be able to travel in support of data capture, device testing, and delivery. Assists in developing testing documentation and device user and operator manuals. Supports production and engineering professionals by: Troubleshooting systems and/or components. Determining suitable replacements of OEM components with Commercial off-the-Shelf (COTS) components. Determining functional and physical fidelity of COTS, simulated components, and software. Advising if components are properly installed, and wires are accurately routed and secured. Informing functionality of components, subsystems, and systems through interpretation and communication of the theory of operation and practical application. Identification of spares for logistical support of training devices. Identifying tools, test sets, and support equipment to meet the training requirements of the device. Hardware and Software Integration (HSI). Assisting the production team as necessary to meet schedule dates. Develops training curriculum and courseware or other instructional products and presents them to the customer. Performs Contractor Preliminary Inspections (CPI). Accompanies training device deliveries to ensure proper handling and care of the training device while loading, unloading, and transporting/towing events. Provides analysis of transportation options based on contract requirements, such as method, location, and environment. Oversees and aids in the assembly of the training device to ensure proper care and installation of components. Performs Contractor Final Inspection (CFI) once the device is reassembled at the customer's site. Complies with International Traffic in Arms Regulation (ITAR) restrictions on export of military hardware and training services. Complies with Controlled Unclassified Information (CUI) and security classifications as outlined in the National Industrial Security Program Operating Manual (NISPOM). Must be capable of safely handling government-furnished equipment and materials. Must be available to work a standard weekly schedule with overtime as required. Perform other duties as assigned. Supervisory Responsibilities None Requirements Knowledge, Skills, and Abilities Able to work in a team to accomplish common goals. Possess good verbal and written English communication skills for training development and internal/external communications. Must interact professionally with military, government, and foreign personnel using the proper courtesies while observing the correct customs. Must be able to read, navigate, and interpret applicable technical manuals and engineering drawings. Experienced with Microsoft Office software tools. Consistently demonstrate interpersonal skills to accept assignments and communicate technical concepts in layman's terms. Ability to analyze and interpret instructions and standards. Ability to communicate effectively, both verbally and in writing. Must be able to obtain a security clearance when required by the contract. Education and Experience High school diploma or GED equivalent. Six (6) years of experience directly related to the area of expertise in the maintenance or operation of systems and subsystems for the AH-64D/E Apache Helicopter as a 15Y. Additional qualifications or experience as required by the Statement of Work. Successful completion of an approved Military Instructor Training Program is desired but not required.

LSI is an employee-owned company that employs dynamic teams of professionals - people with the finest technical expertise, a level of passionate creativity, and a truly visionary outlook who deliver innovative training solutions that exceed our customers' expectations. Everyone at LSI has a personal stake in our success. LSI has over 400 training support experts, engineers, and craftsmen on staff who develop state-of-the-art high-fidelity training devices, complex computer-based, highly interactive distributed learning products, and comprehensive, dynamic technical publications. LSI employee-owners collaborate to deliver training products and services for a myriad of programs and customers, using leading-edge technology and proven processes. Mission Our mission is to prepare our military and allies to be battle-ready through cutting-edge training products and services. Vision Our vision is to be the premier provider of military training solutions, renowned for our innovation and excellence. Through employee-ownership and teamwork, we will shape a future where every military service member is equipped to succeed in their mission. Guiding Principles ESOP Sustainability: We do everything within our control to meet project budgets and schedules, so our ESOP prospers. Take Ownership: Each Employee-Owner takes ownership at the individual level for their words, actions, and results. Individual ownership breeds accountability. Accountability breeds trust. When we hold ourselves accountable and trust our fellow employee-owners to do the same, we realize success. Clear Communication: We project confidence in our communication by using unambiguous language and providing clear purpose and direction. Pursuit of Excellence: We aggressively pursue continuous improvement both as teams and individual employee-owners. We strive to get better every day. There is no room for mediocrity. Pride in Our Work: We know the value of our work and are proud of what we produce. Customer Focus: Customers are both internal and external, and we strive to give both our best efforts. Assume Positive Intent: Assume others are well-intentioned in their actions and seek additional information about the circumstances to help solve problems. Assuming positive intent in all interactions is the key to building strong teams and working together to solve problems. One Voice: Every Employee-Owner is expected to speak up if they have an idea for improvement or if they disagree with a potential course of action. Once a decision is made, the entire team commits to it and moves forward with one voice. Apply: ******************************* General Summary The Subject Matter Expert (SME)-Technician/Operator II for training devices designs, develops, reviews, and tests training solutions and conducts technician or operator training for defined areas of military expertise in accordance with contractual specifications, standards, and instructions. Essential Job Functions Serves as a SME for the development and delivery of training solutions pertaining to technicians, maintainers, or operators of military platforms, systems, or weapons. Works with a team of engineering professionals to analyze, design, develop, and deliver desktop software, virtual/augmented reality simulators, and training devices. Works with a team of production and manufacturing technicians to provide technical guidance during all phases of development and implementation. Participates in training conferences, In-Process Reviews (IPRs), and other required meetings. Must be able to travel in support of data capture, device testing, and delivery. Develops testing documentation and device user and operator manuals. Supports production and engineering professionals by: Troubleshooting systems and/or components. Determining suitable replacements of OEM components with Commercial off-the-Shelf (COTS) components. Determining functional and physical fidelity of COTS, simulated components, and software. Advising if components are properly installed, and wires are accurately routed and secured. Informing functionality of components, subsystems, and systems through interpretation and communication of theory of operation and practical application. Identification of spares for logistical support of training devices. Identifying tools, test sets, and support equipment to meet training requirements of the device. Hardware and Software Integration (HSI). Assisting the production team as necessary to meet schedule dates. Develops training curriculum and courseware or other instructional products and presents them to the customer. May lead a team of SMEs in the performance of Contractor Preliminary Inspections (CPI). May lead a team during training device deliveries to ensure proper handling and care of training device while loading, unloading, and transporting/towing events. Provides analysis of transportation option based on contract requirement, such as method, location, and environment. Oversees and aids in assembly of training device to ensure proper care and installation of components. Performs Contractor Final Inspection (CFI) once the device is reassembled at the customer's site. Complies with International Traffic in Arms Regulation (ITAR) restrictions on export of military hardware and training services. Complies with Controlled Unclassified Information (CUI) and security classifications as outlined in the National Industrial Security Program Operating Manual (NISPOM). Must be capable of safely handling government-furnished equipment and materials. Must be available to work a standard weekly schedule with overtime as required. Perform other duties as assigned. Supervisory Responsibilities None Requirements Knowledge, Skills, and Abilities Able to work in a team to accomplish common goals. Must demonstrate the ability to take initiative and work independently. Must assign tasks and report status if designated as a testing lead. Possess good verbal and written English communication skills for training development and internal/external communications. Must interact professionally with military, government, and foreign personnel using the proper courtesies while observing the correct customs. Must be able to read, navigate, and interpret applicable technical manuals and engineering drawings. Experienced with Microsoft Office software tools. Consistently demonstrate interpersonal skills to accept assignments and communicate technical concepts in layman's terms. Ability to analyze and interpret instructions and standards. Ability to communicate effectively, both verbal and in writing. Must be able to obtain a security clearance when required by the contract. Education and Experience High school diploma or GED equivalent. Eight (8) years of experience directly related to the area of expertise in the maintenance or operation of systems and subsystems for the AH-64D/E Apache Helicopter as a 15Y. Additional qualifications or experience as required by the Statement of Work. Successful completion of an approved Military Instructor Training Program is desired but not required.

About LSI LSI is an employee-owned company that employs dynamic teams of professionals - people with the finest technical expertise, a level of passionate creativity, and a truly visionary outlook who deliver innovative training solutions that exceed our customers' expectations. Everyone at LSI has a personal stake in our success. LSI has over 400 training support experts, engineers, and craftsmen on staff who develop state-of-the-art high-fidelity training devices, complex computer-based, highly interactive distributed learning products, and comprehensive, dynamic technical publications. LSI employee-owners collaborate to deliver training products and services for a myriad of programs and customers, using leading-edge technology and proven processes. Mission Our mission is to prepare our military and allies to be battle-ready through cutting-edge training products and services. Vision Our vision is to be the premier provider of military training solutions, renowned for our innovation and excellence. Through employee-ownership and teamwork, we will shape a future where every military service member is equipped to succeed in their mission. Guiding Principles ESOP Sustainability: We do everything within our control to meet project budgets and schedules, so our ESOP prospers. Take Ownership: Each Employee-Owner takes ownership at the individual level for their words, actions, and results. Individual ownership breeds accountability. Accountability breeds trust. When we hold ourselves accountable and trust our fellow employee-owners to do the same, we realize success. Clear Communication: We project confidence in our communication by using unambiguous language and providing clear purpose and direction. Pursuit of Excellence: We aggressively pursue continuous improvement both as teams and individual employee-owners. We strive to get better every day. There is no room for mediocrity. Pride in Our Work: We know the value of our work and are proud of what we produce. Customer Focus: Customers are both internal and external, and we strive to give both our best efforts. Assume Positive Intent: Assume others are well-intentioned in their actions and seek additional information about the circumstances to help solve problems. Assuming positive intent in all interactions is the key to building strong teams and working together to solve problems. One Voice: Every Employee-Owner is expected to speak up if they have an idea for improvement or if they disagree with a potential course of action. Once a decision is made, the entire team commits to it and moves forward with one voice. Apply: ******************************* General Summary The Subject Matter Expert (SME)-Technician/Operator I for training devices designs, develops, reviews, and tests training solutions and conducts technician or operator training for defined areas of military expertise in accordance with contractual specifications, standards, and instructions. Essential Job Functions * Serves as an SME for the development and delivery of training solutions pertaining to technicians, maintainers, or operators of military platforms, systems, or weapons. * Works with a team of engineering professionals to analyze, design, develop, and deliver desktop software, virtual/augmented reality simulators, and training devices. * Works with a team of production and manufacturing technicians to provide technical guidance during all phases of development and implementation. * Participates in training conferences, In-Process Reviews (IPRs), and other required meetings. * Must be able to travel in support of data capture, device testing, and delivery. * Assists in developing testing documentation and device user and operator manuals. * Supports production and engineering professionals by: * Troubleshooting systems and/or components. * Determining suitable replacements of OEM components with Commercial off-the-Shelf (COTS) components. * Determining functional and physical fidelity of COTS, simulated components, and software. * Advising if components are properly installed, and wires are accurately routed and secured. * Informing functionality of components, subsystems, and systems through interpretation and communication of the theory of operation and practical application. * Identification of spares for logistical support of training devices. * Identifying tools, test sets, and support equipment to meet the training requirements of the device. * Hardware and Software Integration (HSI). * Assisting the production team as necessary to meet schedule dates. * Develops training curriculum and courseware or other instructional products and presents them to the customer. * Performs Contractor Preliminary Inspections (CPI). * Accompanies training device deliveries to ensure proper handling and care of the training device while loading, unloading, and transporting/towing events. * Provides analysis of transportation options based on contract requirements, such as method, location, and environment. * Oversees and aids in the assembly of the training device to ensure proper care and installation of components. * Performs Contractor Final Inspection (CFI) once the device is reassembled at the customer's site. * Complies with International Traffic in Arms Regulation (ITAR) restrictions on export of military hardware and training services. * Complies with Controlled Unclassified Information (CUI) and security classifications as outlined in the National Industrial Security Program Operating Manual (NISPOM). * Must be capable of safely handling government-furnished equipment and materials. * Must be available to work a standard weekly schedule with overtime as required. * Perform other duties as assigned. Supervisory Responsibilities None Job Requirements Knowledge, Skills, and Abilities * Able to work in a team to accomplish common goals. * Possess good verbal and written English communication skills for training development and internal/external communications. * Must interact professionally with military, government, and foreign personnel using the proper courtesies while observing the correct customs. * Must be able to read, navigate, and interpret applicable technical manuals and engineering drawings. * Experienced with Microsoft Office software tools. * Consistently demonstrate interpersonal skills to accept assignments and communicate technical concepts in layman's terms. * Ability to analyze and interpret instructions and standards. * Ability to communicate effectively, both verbally and in writing. * Must be able to obtain a security clearance when required by the contract. Education and Experience * High school diploma or GED equivalent. * Six (6) years of experience directly related to the area of expertise in the maintenance or operation of systems and subsystems for the AH-64D/E Apache Helicopter as a 15Y. * Additional qualifications or experience as required by the Statement of Work. * Successful completion of an approved Military Instructor Training Program is desired but not required. Equal Opportunity Employer including Disability/Vets.

About LSI LSI is an employee-owned company that employs dynamic teams of professionals - people with the finest technical expertise, a level of passionate creativity, and a truly visionary outlook who deliver innovative training solutions that exceed our customers' expectations. Everyone at LSI has a personal stake in our success. LSI has over 400 training support experts, engineers, and craftsmen on staff who develop state-of-the-art high-fidelity training devices, complex computer-based, highly interactive distributed learning products, and comprehensive, dynamic technical publications. LSI employee-owners collaborate to deliver training products and services for a myriad of programs and customers, using leading-edge technology and proven processes. Mission Our mission is to prepare our military and allies to be battle-ready through cutting-edge training products and services. Vision Our vision is to be the premier provider of military training solutions, renowned for our innovation and excellence. Through employee-ownership and teamwork, we will shape a future where every military service member is equipped to succeed in their mission. Guiding Principles ESOP Sustainability: We do everything within our control to meet project budgets and schedules, so our ESOP prospers. Take Ownership: Each Employee-Owner takes ownership at the individual level for their words, actions, and results. Individual ownership breeds accountability. Accountability breeds trust. When we hold ourselves accountable and trust our fellow employee-owners to do the same, we realize success. Clear Communication: We project confidence in our communication by using unambiguous language and providing clear purpose and direction. Pursuit of Excellence: We aggressively pursue continuous improvement both as teams and individual employee-owners. We strive to get better every day. There is no room for mediocrity. Pride in Our Work: We know the value of our work and are proud of what we produce. Customer Focus: Customers are both internal and external, and we strive to give both our best efforts. Assume Positive Intent: Assume others are well-intentioned in their actions and seek additional information about the circumstances to help solve problems. Assuming positive intent in all interactions is the key to building strong teams and working together to solve problems. One Voice: Every Employee-Owner is expected to speak up if they have an idea for improvement or if they disagree with a potential course of action. Once a decision is made, the entire team commits to it and moves forward with one voice. Apply: ******************************* General Summary The Subject Matter Expert (SME)-Technician/Operator II for training devices designs, develops, reviews, and tests training solutions and conducts technician or operator training for defined areas of military expertise in accordance with contractual specifications, standards, and instructions. Essential Job Functions * Serves as a SME for the development and delivery of training solutions pertaining to technicians, maintainers, or operators of military platforms, systems, or weapons. * Works with a team of engineering professionals to analyze, design, develop, and deliver desktop software, virtual/augmented reality simulators, and training devices. * Works with a team of production and manufacturing technicians to provide technical guidance during all phases of development and implementation. * Participates in training conferences, In-Process Reviews (IPRs), and other required meetings. * Must be able to travel in support of data capture, device testing, and delivery. * Develops testing documentation and device user and operator manuals. * Supports production and engineering professionals by: * Troubleshooting systems and/or components. * Determining suitable replacements of OEM components with Commercial off-the-Shelf (COTS) components. * Determining functional and physical fidelity of COTS, simulated components, and software. * Advising if components are properly installed, and wires are accurately routed and secured. * Informing functionality of components, subsystems, and systems through interpretation and communication of theory of operation and practical application. * Identification of spares for logistical support of training devices. * Identifying tools, test sets, and support equipment to meet training requirements of the device. * Hardware and Software Integration (HSI). * Assisting the production team as necessary to meet schedule dates. * Develops training curriculum and courseware or other instructional products and presents them to the customer. * May lead a team of SMEs in the performance of Contractor Preliminary Inspections (CPI). * May lead a team during training device deliveries to ensure proper handling and care of training device while loading, unloading, and transporting/towing events. * Provides analysis of transportation option based on contract requirement, such as method, location, and environment. * Oversees and aids in assembly of training device to ensure proper care and installation of components. * Performs Contractor Final Inspection (CFI) once the device is reassembled at the customer's site. * Complies with International Traffic in Arms Regulation (ITAR) restrictions on export of military hardware and training services. * Complies with Controlled Unclassified Information (CUI) and security classifications as outlined in the National Industrial Security Program Operating Manual (NISPOM). * Must be capable of safely handling government-furnished equipment and materials. * Must be available to work a standard weekly schedule with overtime as required. * Perform other duties as assigned. Supervisory Responsibilities * None Job Requirements Knowledge, Skills, and Abilities * Able to work in a team to accomplish common goals. * Must demonstrate the ability to take initiative and work independently. * Must assign tasks and report status if designated as a testing lead. * Possess good verbal and written English communication skills for training development and internal/external communications. * Must interact professionally with military, government, and foreign personnel using the proper courtesies while observing the correct customs. * Must be able to read, navigate, and interpret applicable technical manuals and engineering drawings. * Experienced with Microsoft Office software tools. * Consistently demonstrate interpersonal skills to accept assignments and communicate technical concepts in layman's terms. * Ability to analyze and interpret instructions and standards. * Ability to communicate effectively, both verbal and in writing. * Must be able to obtain a security clearance when required by the contract. Education and Experience * High school diploma or GED equivalent. * Eight (8) years of experience directly related to the area of expertise in the maintenance or operation of systems and subsystems for the AH-64D/E Apache Helicopter as a 15Y. * Additional qualifications or experience as required by the Statement of Work. * Successful completion of an approved Military Instructor Training Program is desired but not required. Equal Opportunity Employer including Disability/Vets.

E*Pro Consulting service offerings include contingent Staff Augmentation of IT professionals, Permanent Recruiting and Temp-to-Hire. In addition, our industry expertise and knowledge within financial services, Insurance, Telecom, Manufacturing, Technology, Media and Entertainment, Pharmaceutical, Health Care and service industries ensures our services are customized to meet specific needs. For more details please visit our website: **************** We have been retained for providing recruiting assistance, for Direct hires, by one of the world-leading information technology consulting, services, and business process outsourcing organization that envisioned and pioneered the adoption of the flexible global business practices that today enable companies to operate more efficiently and produce more value. E* Pro, Inc. is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to gender, race, color, religion, sex, national origin, veteran or disability status Job Description • Installs and provisions Metro Ethernet services in the network on various routers and switches. • Works on ACD system taking calls from technicians in the field and central offices for new switch turn-ups and activations. • Works on ACD system taking calls from customers on new turn-up activities. • Takes ACD and direct calls from internal customer support centers around order status and issues. • Solves new turn-up issues by conducting various diagnostic tests using conventional and specialized test equipment and referring to vendor/manufacturer provided documentation to identify the extent and source of obscure, hard-to-resolve problems that have defied routine troubleshooting techniques. • Resolves complex network problems involving power, network hardware and/or software. • Uses software and hardware tools to identify and diagnose network status and issues. • This is a fast paced job where multitasking is required with an ability to prioritize tasks. • Problem-solves and uses organizational skills to meet critical management and customer demands measured by key performance indicators. Qualifications Basic Qualifications: • Strong communication (oral and written) skills • Ethernet LAN/WAN Network knowledge • Proficient in various software applications i.e. Microsoft office • Strong customer service, multi-tasking, and problem solving skills • Ability to work in a stressful, fast paced, team-oriented environment **** Cisco CCNA certification preferred, but not required**** Additional Information All your information will be kept confidential according to EEO guidelines.

E*Pro Consulting service offerings include contingent Staff Augmentation of IT professionals, Permanent Recruiting and Temp-to-Hire. In addition, our industry expertise and knowledge within financial services, Insurance, Telecom, Manufacturing, Technology, Media and Entertainment, Pharmaceutical, Health Care and service industries ensures our services are customized to meet specific needs. For more details please visit our website: **************** We have been retained for providing recruiting assistance, for Direct hires, by one of the world-leading information technology consulting, services, and business process outsourcing organization that envisioned and pioneered the adoption of the flexible global business practices that today enable companies to operate more efficiently and produce more value. E* Pro, Inc. is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to gender, race, color, religion, sex, national origin, veteran or disability status Job Description • Installs and provisions Metro Ethernet services in the network on various routers and switches. • Works on ACD system taking calls from technicians in the field and central offices for new switch turn-ups and activations. • Works on ACD system taking calls from customers on new turn-up activities. • Takes ACD and direct calls from internal customer support centers around order status and issues. • Solves new turn-up issues by conducting various diagnostic tests using conventional and specialized test equipment and referring to vendor/manufacturer provided documentation to identify the extent and source of obscure, hard-to-resolve problems that have defied routine troubleshooting techniques. • Resolves complex network problems involving power, network hardware and/or software. • Uses software and hardware tools to identify and diagnose network status and issues. • This is a fast paced job where multitasking is required with an ability to prioritize tasks. • Problem-solves and uses organizational skills to meet critical management and customer demands measured by key performance indicators. Qualifications Basic Qualifications: • Strong communication (oral and written) skills • Ethernet LAN/WAN Network knowledge • Proficient in various software applications i.e. Microsoft office • Strong customer service, multi-tasking, and problem solving skills • Ability to work in a stressful, fast paced, team-oriented environment **** Cisco CCNA certification preferred, but not required**** Additional Information All your information will be kept confidential according to EEO guidelines.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role Overview Arcadis seeks experienced UXO Technicians III for upcoming munitions response and range clearance projects across the United States and US Territories. This is a general job posting for talent pooling-applicants may be considered for present and future assignments. All candidates must meet the requirements of DDESB TP-18 (latest version) for the desired position. Key Responsibilities As a UXO Tech III, you will: Supervise and execute all MEC-related activities on project sites, ensuring compliance with safety and quality standards Perform all duties of UXO Tech II and UXO Tech I roles as needed Support the planning, execution, and completion of munitions response and range clearance activities Identify, locate, and properly handle unexploded ordnance (UXO), munitions, and explosives of concern (MEC) Oversee field team performance and mentor junior UXO staff Ensure compliance with project work plans, safety protocols, and federal/state regulations Complete field documentation and reporting in accordance with project and regulatory requirements Communicate effectively with project leadership, clients, and regulatory stakeholders Required Qualifications & Experience To qualify as a UXO Tech III, you must have: Previous military EOD and/or commercial UXO experience in munitions response or range clearance activities. Minimum 8 years of UXO work experience Military EOD or Graduation from a DDESB Certified UXO Technician I Course Ability to perform all responsibilities of UXO Tech II and Tech I OSHA 40-Hour HAZWOPER certification, with current 8-hour refresher, 8-hour Supervisor, and OSHA physical Ability to obtain and maintain an ATF Possessor clearance for handling explosives Strong understanding of MEC-related health, safety, and environmental protocols Excellent leadership, communication, and documentation skills Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The pay rate for this position is $35 to $45/hr. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #LI-SP1

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Arcadis seeks UXO Technicians II candidates for various project sites across the United States and US Territories. This is a general job posting and not tied to a specific current open position. Candidates who submit their resume to this posting may be considered for all future openings as they arise. All candidates must meet the requirements in accordance with DDESB TP-18 (latest version) for the desired position(s). Role accountabilities: UXO Tech II - Candidates must have previous military EOD and/or commercial UXO experience in munitions response or range clearance activities plus 3 years of UXO work experience Supervise and perform all MEC-related activities for project execution Qualifications & Experience: Military EOD graduates must have 8 years of progressive EOD/UXO experience Additional training requirements include OSHA 8-hour Management and Supervisor Training course, quality professional training and demonstrate an understanding of QC and QA practices associated with MEC-related activities and managing and processing MPPEH, including documentation of its explosive's safety status Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The pay rate for this position is $35.43 /hr. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #LI-SP1

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Arcadis seeks UXO Technicians II candidates for various project sites across the United States and US Territories. This is a general job posting and not tied to a specific current open position. Candidates who submit their resume to this posting may be considered for all future openings as they arise. All candidates must meet the requirements in accordance with DDESB TP-18 (latest version) for the desired position(s). Role accountabilities: * UXO Tech II - Candidates must have previous military EOD and/or commercial UXO experience in munitions response or range clearance activities plus 3 years of UXO work experience * Supervise and perform all MEC-related activities for project execution Qualifications & Experience: * Military EOD graduates must have 8 years of progressive EOD/UXO experience * Additional training requirements include OSHA 8-hour Management and Supervisor Training course, quality professional training and demonstrate an understanding of QC and QA practices associated with MEC-related activities and managing and processing MPPEH, including documentation of its explosive's safety status Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The pay rate for this position is $35.43 /hr. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #LI-SP1

Performs installation, maintenance, and repairs of in-line manufacturing equipment. Locates and diagnose failures, replaces defective components/modules, and performs basic troubleshooting using standard electronic equipment, detailed drawings, diagrams, sketches, specifications, prints, manuals, and verbal and/or written instructions. May redesign basic optical, vacuum, electrical, electronic, or mechanical systems for incorporation on existing manufacturing equipment. May estimate labor and equipment costs and prepare requisitions as required. Maintains appropriate maintenance, inventory, and repair logs. Uses a variety of hand, power, and test tools and equipment.

Description: Power Your Potential - Join the Power-Pole Team! Electronics Technician Department: Engineering | Status: Full-time | Non-Exempt Why Work at Power-Pole? We're not just building electronics-we're engineering adventure. As a leader in marine technology, Power-Pole is committed to performance, reliability, and innovation. Join a team that values quality craftsmanship and continuous improvement. At Power-Pole, we believe in fueling adventure through innovation. We're seeking an experienced Electronics Technician to support our Engineering team by assembling, testing, and troubleshooting prototype circuit boards for marine products that lead the industry. Join the Power-Pole Team! Benefits 100% employer paid - Employee/family health plan option available Health Savings Account (HSA) - with generous employer matching program Dental, Vision, Voluntary Life Insurance 100% employer paid - Employee Life Insurance, Short Term and Long-Term Disability Insurance Accident, Hospital and Critical Illness 401K with generous employer matching program Paid time off Holiday pay Employee Referral Program Mission Our mission is to share a sense of adventure with the world through our high-performance marine products while instilling and inspiring consumer confidence with superior service. What You'll Do: Assemble, modify, and repair developmental electronic circuit boards Diagnose and repair PCBA assemblies down to the component level Build and troubleshoot prototype circuits for R&D and warranty investigations Operate test equipment including oscilloscopes, multimeters, logic analyzers, and power supplies Read and interpret technical documentation-schematics, BOMs, debug guides, and test procedures Work with Engineering and Customer Service teams to analyze board failures and improve product performance Collaborate on quality goals and diagnostic efficiency Maintain safety and cleanliness standards in the Electronics Lab Please note this is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Requirements:What You Bring: 2-5 years of experience in prototype board assembly and troubleshooting Proficiency in soldering (through-hole and SMT), and strong knowledge of electronic theory Experience with lab test equipment and PCB diagnostics Ability to read complex technical documentation and work independently Strong communication skills and a team-first mindset Critical Thinking- Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. Coordination- Adjusting actions in relation to others' actions. Active Learning- Understanding the implications of new information for both current and future problem-solving and decision-making. Learning Strategies- Selecting and using training/instructional methods and procedures appropriate for the situation when learning or teaching new things. Time Management- Managing one's own time and the time of others. Operation Monitoring- Watching gauges, dials, or other indicators to make sure a machine is working properly. Operation and Control- Controlling operations of equipment or systems. Complex Problem Solving- Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. Quality Control Analysis- Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Language Skills- Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills- Ability to add and subtract two-digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. Problem Solving Ability- Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Computer Skills- Basic personal computer skills Educational/Experience Requirements Preferred Associate degree in Electronic Assembler or a two-year technical degree/certificate in a related discipline Required High school diploma and 2-5 years related experience and/or training; equivalent combination. Working Hours 8:00AM - 5:00PM Monday through Friday, with one hour lunch Working Conditions/Physical Demands of the Position The work environment characteristics described here are representative of those typical in an electronics lab/productive environment. Tool use is required. The noise level in the work environment is usually moderate to loud, including the sounds of forklifts, tools, and machinery. Work is generally performed near moving mechanical parts. In some instances personal protective equipment (PPE) will be required in this work environment. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms all in a repetitive manner. The employee must frequently lift and/or move up to 50 pounds. Work performed will be working with mostly DC and minimal AC. *Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Disclaimer: Job descriptions are not intended as and do not create employment contracts. The organization maintains its status as an at-will employer. Employees can be terminated for any reason not prohibited by law.

Power Your Potential - Join the Power-Pole Team! Electronics Technician Department: Engineering | Status: Full-time | Non-Exempt Why Work at Power-Pole? We're not just building electronics-we're engineering adventure. As a leader in marine technology, Power-Pole is committed to performance, reliability, and innovation. Join a team that values quality craftsmanship and continuous improvement. At Power-Pole, we believe in fueling adventure through innovation. We're seeking an experienced Electronics Technician to support our Engineering team by assembling, testing, and troubleshooting prototype circuit boards for marine products that lead the industry. Join the Power-Pole Team! Benefits 100% employer paid - Employee/family health plan option available Health Savings Account (HSA) - with generous employer matching program Dental, Vision, Voluntary Life Insurance 100% employer paid - Employee Life Insurance, Short Term and Long-Term Disability Insurance Accident, Hospital and Critical Illness 401K with generous employer matching program Paid time off Holiday pay Employee Referral Program Mission Our mission is to share a sense of adventure with the world through our high-performance marine products while instilling and inspiring consumer confidence with superior service. What You'll Do: Assemble, modify, and repair developmental electronic circuit boards Diagnose and repair PCBA assemblies down to the component level Build and troubleshoot prototype circuits for R&D and warranty investigations Operate test equipment including oscilloscopes, multimeters, logic analyzers, and power supplies Read and interpret technical documentation-schematics, BOMs, debug guides, and test procedures Work with Engineering and Customer Service teams to analyze board failures and improve product performance Collaborate on quality goals and diagnostic efficiency Maintain safety and cleanliness standards in the Electronics Lab Please note this is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Requirements What You Bring: 2-5 years of experience in prototype board assembly and troubleshooting Proficiency in soldering (through-hole and SMT), and strong knowledge of electronic theory Experience with lab test equipment and PCB diagnostics Ability to read complex technical documentation and work independently Strong communication skills and a team-first mindset Critical Thinking- Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. Coordination- Adjusting actions in relation to others' actions. Active Learning- Understanding the implications of new information for both current and future problem-solving and decision-making. Learning Strategies- Selecting and using training/instructional methods and procedures appropriate for the situation when learning or teaching new things. Time Management- Managing one's own time and the time of others. Operation Monitoring- Watching gauges, dials, or other indicators to make sure a machine is working properly. Operation and Control- Controlling operations of equipment or systems. Complex Problem Solving- Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. Quality Control Analysis- Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Language Skills- Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. Mathematical Skills- Ability to add and subtract two-digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. Problem Solving Ability- Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Computer Skills- Basic personal computer skills Educational/Experience Requirements Preferred Associate degree in Electronic Assembler or a two-year technical degree/certificate in a related discipline Required High school diploma and 2-5 years related experience and/or training; equivalent combination. Working Hours 8:00AM - 5:00PM Monday through Friday, with one hour lunch Working Conditions/Physical Demands of the Position The work environment characteristics described here are representative of those typical in an electronics lab/productive environment. Tool use is required. The noise level in the work environment is usually moderate to loud, including the sounds of forklifts, tools, and machinery. Work is generally performed near moving mechanical parts. In some instances personal protective equipment (PPE) will be required in this work environment. While performing the duties of this job, the employee is regularly required to talk or hear. The employee frequently is required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms all in a repetitive manner. The employee must frequently lift and/or move up to 50 pounds. Work performed will be working with mostly DC and minimal AC. *Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Disclaimer: Job descriptions are not intended as and do not create employment contracts. The organization maintains its status as an at-will employer. Employees can be terminated for any reason not prohibited by law.