Electrical apprentice jobs in San Juan Capistrano, CA - 110 jobs

Client: L-3 Harris Job Title: Electrical Engineering Duration: 12 Months (possible extn. Or hire) Pay rate: $65/hour on (W2) Essential Functions: Responsible for designing, developing, modifying, testing, evaluating and integrating electronic equipment, electronic parts, components, or integrated circuitry for complex, high performance hardware systems. Determines design approaches and parameters. Analyzes electrical requirements to determine feasibility of design within time and cost constraints. Analyzes equipment to establish operating data, conducts experimental tests and evaluates results. Selects components and equipment based on analysis of specifications and reliability. Able to identify component operational characteristics that may impact system performance and or sustainability. Supports and/or leads various design activities for new/existing products, predominantly involving medium frequencies/edge rates. Design for manufacturing is considered through all phases of the development process. Applies moderately complex electrical engineering principles and techniques to support/lead design, development, documentation, verification, and manufacturing debug activities. Supports and/or leads design modifications for existing products frequently driven by component obsolescence situations. The design modification is usually of moderate complexity and may require major card level redesign to absorb the necessary hardware changes. Provides technical solutions to a wide range of difficult problems. Contributes to completion of milestones associated with specific projects that have significant effect on the success of a sub-process/small project task. Ability to understand and generate schematics with digital and analog electronic circuits. Ability to provide guidance for PCB layout. May also review vendor capability to support development. Includes the application of specialized skill sets including analog, CCA, power, antenna, and control systems knowledge as required. May develop, design, and assess the methodologies and performance of specialized algorithms for, Underwater Acoustics, sonar, communications, geophysical, and other sensor processing applications. Generation of Presentation materials and training Operation's Manual development and release Test Procedure development and release Qualifications: Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, a minimum of 8 years of prior related experience. Minimum 3 years of experience in Analog Circuit Design. Minimum 3 years of RF Electronics. Minimum 2 years of Schematics Capturing & PCBA Layout in either Altium or Cadence. Minimum 3 years Lab experience in trouble shooting electronics in Analog and RF domain. Minimum 2 years of experience working with Network Analyzer, Frequency Generator, Vector Analyzer, and digital/analog scope. Preferred Additional Skills: Familiarity with GPS Electronics / Circuit Design. A/D and D/A Circuit Design, Interfacing and use experience Familiarity with industry standard EDA tools including schematic capture, PCB layout and Experience in development of military products, a plus.

**Key Responsibilities:** + Install, maintain, and repair electrical systems, wiring, control systems, and equipment in accordance with local and national electrical codes. + Troubleshoot and diagnose electrical issues using appropriate testing devices and schematics. + Perform preventive maintenance on electrical systems and machinery to minimize downtime. + Read and interpret blueprints, technical drawings, and electrical schematics. + Work with Programmable Logic Controllers (PLCs), Variable Frequency Drives (VFDs), and other automation systems. + Ensure compliance with OSHA, NFPA 70E, and other safety standards. + Collaborate with engineers, maintenance staff, and production teams to support operational goals. + Maintain accurate records of work performed, parts used, and time spent on tasks. **Required Qualifications:** **Education:** + High school diploma or GED required. + Associate degree or technical diploma in Electrical Technology, Industrial Maintenance, or a related field preferred. **Certifications:** + **Valid State Electrician License** (Journeyman or Master, depending on state requirements). **The salary range for this position is $45-$55 per hour. Factors such as scope and responsibilities of the position, candidate's work experience, education/training, job-related skills, internal peer equity, as well as market and business considerations may influence base pay offered. This salary will be subject to a geographic adjustment (according to a specific city and state), if an authorization is granted to work outside of the location listed in this posting.** **Mitsubishi Chemical Group (MCGC) and any of our subsidiaries do not accept unsolicited resumes from individual recruiters or third-party agencies. No fee will be paid to third parties who submit unsolicited candidates directly to our hiring managers or HR team. No placement fees will be paid to any firm unless specifically invited on the search by the MCGC Talent Acquisition team and such candidate was submitted to the MCGC Talent Acquisition Team via our Applicant Tracking System.** All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, or other legally protected status Mitsubishi Chemical Carbon Fiber and Composites, Inc. is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. If you need special assistance or an accommodation while seeking employment, please email MCA-MBX_************************. (MCA-MBX_************************.W) We will make a determination on your request for reasonable accommodation on a case-by-case basis. The law requires Mitsubishi Chemical Carbon Fiber and Composites, Inc. to post a notice describing the Federal laws prohibiting job discrimination. For information regarding your legal rights and protections, please click on the following link: Know Your Rights (***************************************************************************************** Mitsubishi Chemical Carbon Fiber and Composites, Inc. will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay. Please see the Pay Transparency Nondiscrimination Provision (********************************************************************************** for more information As a Federal Contractor, Mitsubishi Chemical Carbon Fiber and Composites, Inc. is required to participate in the E-Verify Program to confirm eligibility to work in the United States. For information please click on the following link: E-Verify (*************************************************************************************** .

Picture yourself spending your days in Disneyland, knowing you help keep attractions like _Space Mountain_ and The _Matterhorn_ up and running. Wouldn't it be cool to put your skills to work on the rides, restaurants and facilities of the " **_Happiest Place on Earth_** ?" If you're interested in knowing that your work helps people smile, keep reading... We're looking for highly skilled Electricians who have experience maintaining and repairing equipment like that found at **Disneyland** and **Disney California Adventure, kitchen & restaurants** . If this sounds like a challenge you're ready to undertake, apply today to join the team! **Responsibilities :** **Every day as an Appliance Electrician is different** . On any given day or night, you might: + Troubleshoot equipment problems at one of the many restaurants to keep the food flowing. + Be responsible for performing preventive maintenance, repairing electrical systems/assemblies, lamping, installation of receptacles, switches, bending conduit, and resetting breakers. **Basic Qualifications :** **To be successful in this role, you will need:** + Ability to perform maintenance on food preparation and holding appliances/equipment. Understanding of and ability to operate under Hazard Analysis Critical Control Point (HACCP) guidelines and other food safety/sanitary guidelines. Must also be able to troubleshoot and repair gas and steam systems applied in commercial kitchen equipment. + Technical competence, the ability to read and understand detailed instructions, blueprints, flowcharts, schematics and engineering documents, and pass all compliance for technical and safety training + Knowledge in the control and repair of circuits and motors + Keen troubleshooting skills and comfortable working alone or in a team. + Ability to evaluate the scope of a job, resolve needed parts/materials, and order through authorized vendors + Expertise using common hand tools, meters, gauges and other associated test and measurement equipment, as well as ability to measure current, voltage and amperage + Proficiency in the basic math skills needed to do the job, differentiate colors, digital literacy, and full understanding of the National Electric Code + Stamina and the physical ability to undertake the job. You might bicycle, bend, kneel, climb, push vehicles to re-position them for repair, work with arms/hands above shoulder level for an extended period of time, climb (sometimes as high as 200 ft.) and more, all on a regular basis + At least 18 years of age You will be required to use 2-way radios, learn CMMS (MAXIMO work order system), attend/pass compliance and other training sessions to ensure accurate maintenance documentation Electricians may work outdoors in all weather conditions, in an industrial workshop, in kitchens with wet/slippery surfaces, and may have occasional exposure to high temperatures, noise levels, and fumes In addition to the physical tasks listed above, Electronic Technicians may need to push/pull and/or lift up to 10 lbs. constantly, up to 25 lbs. frequently, up to 75 lbs. occasionally and rarely up to/over 100 lbs. Schedule Availability - Must be open to any shift (1st, 2nd, and 3rd shift) including weekends, holidays, with any combination of days off. **Preferred Qualifications:** + 2 or more years of experience + Ideal backgrounds include trade school, apprenticeship and related experience **Additional Information :** Those assigned to the Electrician position are required to attend an annual Hearing Conservation training class and Lead Awareness class. They are also required to submit to an annual audiometric exam and a semi-annual Lead/Zinc blood test. **SCHEDULE AVAILABILITY** Shifts are typically at night, and individuals must have availability to work Sunday through Saturday, any shift (1st, 2nd, and 3rd shift) including holidays, and must be open to any days off. **SUBMITTING YOUR APPLICATION** After clicking " **Apply Now** " below, the employment application will open in a new window. Please complete ALL pages of the application by clicking " **Next** " on each page, then " **Submit** " on the final page. KEYWORD: DLR Casting, dlrcasting, Disneyland Resort Casting Hourly Jobs , DLRResortRoles, DLR Resort Roles, Facilities, HeroesWorkHere, electrician, electronic technicians, blueprints, flowcharts, schematics, engineering documents, circuits, current, voltage, amperage, Hazard Analysis Critical Control Point, HACCP, National Electric Code, CMMS, MAXIMO **The pay rate for this role in California is $40.02 to $48.73 per hour, which follows the pay scale agreed upon in the Collective Bargaining Agreement.** **The base pay actually offered may vary depending on the candidate's geographic region, job-related knowledge, skills, and experience, among other factors. Select benefits may be provided as part of the compensation package, such as medical, financial, and/or other benefits. To learn more about our benefits visit:** ******************************************* **.** **Job ID:** 1316863BR **Location:** Anaheim,California **Job Posting Company:** "Disneyland Resort" The Walt Disney Company and its Affiliated Companies are Equal Employment Opportunity employers and welcome all job seekers including individuals with disabilities and veterans with disabilities. If you have a disability and believe you need a reasonable accommodation in order to search for a job opening or apply for a position, email Candidate.Accommodations@Disney.com with your request. This email address is not for general employment inquiries or correspondence. We will only respond to those requests that are related to the accessibility of the online application system due to a disability.

SUMMARY: Emergency Vehicle Group, Inc. is a leading emergency vehicle dealer and service center for fire apparatus, ambulances, command, and specialty vehicles that is adding to our service operations. We are seeking an entry level mechanic that is detailed oriented and has a passion to accelerate their career to work on fire apparatus (Fire Trucks), ambulances, and other emergency vehicles. Experience with shop equipment, heavy truck components, general tools, knowledge of vehicle detailing wash, polish, and color sanding is a plus! Please submit your resume, employment, and salary history. Qualified Applicants Only. ESSENTIAL JOB FUNCTIONS: Perform work as directed by Shop Foreman and Service Manager. Perform preventative maintenance and inspections on heavy truck chassis and fire components/ambulances. Perform full details on all vehicles includes, wash, buff, polish, etc. Pick up and delivery of customer vehicles. Performs road tests on vehicles to assure proper operating levels. Processes and tracks repair orders. Operates computer to document repair work and maintenance daily. Ensures shop cleanliness and maintenance on a regular basis. General Housekeeping Duties for the Shop and Offices. Monitors and advises all safety related issues related to the shop area, vehicles and wherever maintenance is being performed. Travel to customers' sites for repairs as needed. Available to perform emergency repair work after hours including nights, weekends, and holidays. Requirements REQUIRED KNOWLEDGE AND SKILLS: Reads and follows simple to entry level instructions, schematics and other information contained in repair manuals or the diagnosis and repair of fire and EMS vehicles and equipment. Performs calculations and works with numbers to solve problems. Knowledge of detail products and replated shop equipment. Pays attention to detail while ensuring crews observe safety precautions. Knowledge of safety hazards and precautions. Appropriately records repairs and parts used. PREFERRED EDUCATION, EXPERIENCE AND CERTIFICATIONS: • High School Diploma or GED and 1+ year mechanical repair and maintenance work or equivalent combination of education and experience. • Class C Required, Class B or A CDL Driver's License preferred. • Must pass pre-employment drug screen, physical, criminal background, and MVR check. Salary Description Pay Ranges from $16.50 to $19.50 per Hour

Job DescriptionSalary: $35.72 - $50.00 per hour USCG MMC is required for this role Rotating schedule - travel required to project sites Efficiency. Innovation. Integrity. These are our 3 Pillars. At Curtin Maritime, these core values are the framework for safe performance and operational excellence; proof of these pillars is evident in our people and our fleet. For 25 years, Curtin Maritime has been an industry leader in quality maritime solutions. We are a dynamic Marine Construction and Marine Transportation company experiencing rapid growth. Our team provides customers with a complete suite of maritime solutions, allowing us the incredible opportunity to work on unique projects in some of the most amazing places on earth. Scope of Duties and Responsibilities shall include, but not be limited to the following: Safe operation and routine maintenance of the vessels power, propulsion, auxiliary, and other electro-mechanical and electronic systems in compliance with the applicable laws and regulations of the vessels flag, the international community, company policies and procedures, and the manufacturers recommendations in a manner responsible to the safety of the crew. Under the direct and active supervision of a licensed officer, monitoring, repairing, and performing preventive maintenance in accordance with Company procedures and in a manner responsible to the safety of the crew and the protection of the natural environment. Responsible care and use of the vessels consumable spares, mechanical stores and tools inventories. General vessel maintenance and monitoring reporting to Chief Engineer Create work plan and execute daily tasks in accordance with the established schedule in Vessel Management System. Update completed tasks with notes in Vessel Management System as completed. Maintain inventory of tools and critical/spare parts on board the vessel. Assign work to any assistant engineering staff and monitor to ensure satisfactory completion. Work as a deckhand as needed SKILLS, APTITUDES, QUALIFICATIONS AND CERTIFICATIONS: Mental Aptitudes Required: Ability to handle stressful situations with focus. Understanding importance and taking pride and responsibility in mastering the small things, before mastering the big ones. Understand and respect the chain of command. Ability to take direction no matter how it is given. Continuously demonstrate a strong sense of responsibility and ownership by being pro-active in all situations /tasks. Physical Aptitudes Required: Must meet fit for duty requirements upon job offer (pre-employment physical and drug test) The employee must meet physical requirements including but not limited to, walking, stooping, kneeling, crouching, crawling, climbing up/down ladders and stairs, negotiating uneven and moving surfaces Able to work in confined spaces and carry heavy tools for extended periods of time Must be able to pull heavy lines/hoses, lift, carry heavy items, climb onto barges and up and down ladders. Must be comfortable entering tanks and other confined spaces Must be able to work in difficult conditions with exposure to all weather conditions (rain, ice, snow, wind, heat, etc.) Must be comfortable working aboard boats and barges using heavy lines, winches, and mechanical tools for repairs Ability to lift up to 50 pounds unassisted. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Ability to work when exposed to odors, dust, dirt, mechanical hazards, high noise levels, and potentially hazardous equipment. Tests, Certifications and Other Preferred Not Mandatory Requirements: Merchant Mariner Credential USCG Medical Card Preferred: STCW Reg. III/6-Electro Technical Officer Physical & DOT Drug Test Respiratory Fit Test TWIC Card Passport, or ability to obtain a passport Participation in random drug testing program MODU Chief Engineer OSV

Join Our Team as an Installation Electrician! Burgeson's is seeking a skilled Installation Electrician with at least 5 years of experience in electrical work to become a valuable member of our team. We offer competitive compensation based on your experience level, along with a comprehensive benefits package. If you're a California Certified Electrician seeking a full-time opportunity, we encourage you to apply. Flexibility for overtime and weekend work is essential. Candidates must successfully complete a background check, drug screen, and physical examination. Additionally, applicants should have a clean driving record and be insurable by our insurance provider. Key Responsibilities: Install and maintain electrical equipment and fixtures Set up various raceway and cable tray systems Change main service panels and subpanels Rewire homes Install whole home generators Work on new construction projects Handle tenant improvements (TI) Engage in light commercial electrical work Comply with all safety and quality standards Qualifications: California State Certified Electrician with a minimum of 5 years of experience in electrical engineering or related fields Proficiency in installing both residential and commercial electrical systems and equipment Prior experience in electrical engineering or related roles within the last 5 years Knowledge of generators and solar systems is a plus Familiarity with electrical schematics, blueprints, and manuals Competence with electrical tools and equipment Strong problem-solving and critical thinking abilities Team-oriented with excellent communication skills Ability to lift and carry at least 50 pounds without assistance Position Requirements: Must have a good driving record and be insurable by our insurance company. Must pass background check and drug screen/physical. Benefits offered: Medical insurance, Dental, Vision, AFLAC 401K Holiday pay and Vacation pay Join us and contribute your expertise to our dynamic team!

The J.R. Simplot Company is a diverse, privately held global food and agriculture company headquartered in Boise, Idaho. We are a true farm-to-table company with an integrated portfolio including food processing and food brands, phosphate mining, fertilizer manufacturing, farming, ranching and cattle production, and other enterprises related to agriculture. Summary External Only: Sign on bonus of $1500 & $3000 retention bonuses. This job ensures efficient operation of all electrical systems and electrical/electronic components on site. The individual in this job will be required to fully understand the purpose and operation of the electrical systems, electronic equipment and instrumentation throughout the plant and have the ability to make decisions based on sound judgement when a situation dictates. Key Responsibilities Installs power supply wiring and conduit for newly installed machines and specialized potato-processing equipment such as conveyors, and programmable logic controllers. Connects power supply wires to machines and equipment and connects cables and wires between machines and equipment. Shall have proven and demonstrated history of responsible and safe electrical work and possess a strong knowledge of NEC safety standards and other associated standards and codes. Diagnoses malfunctioning apparatus such as transformers, motors, and lighting fixtures and replaces damaged or broken wires and cables. Tests malfunctioning machinery and discusses malfunction with other maintenance employees, (General Maintenance, Pump Mechanics and Electronics) to diagnose malfunction. Replaces faulty electrical components of machine such as relays, switches, and motors, and positions sensing devices as appropriate or necessary. Diagnoses and repairs or replaces faulty electronic components, such as printed circuit boards. Reads blueprints and all types of electrical schematics. Replaces electric motor bearings and rewires motors as necessary or required. Operates equipment to test for malfunctions and to verify repairs. Plans layout of wiring and installs wiring, conduit, and electrical apparatus in buildings. Typical Education Journeyman Electrician License from the State of Oregon or a State with reciprocity such as, Idaho, Utah, Maine, Montana, Arkansas, Washington or Wyoming. High School Diploma or GED. Relevant Experience 3+ years related experience and/or training Must be familiar with automated control systems and be able to read, understand and maintain electrical drawings and manuals. Other Information The JR Simplot Company offers a competitive compensation package including medical, dental and vision benefits, paid holidays, paid family building leave, retirement contribution match and paid vacation & floating holidays. Pay: $47.35 p/hr + Nightshift Differential Schedule: Nights (6pm - 6am) Other: Overtime is paid after 10 hours worked each day. Nightshift will receive an added differential pay on top of base rate. Job Requisition ID: 23734 Travel Required: None Location(s): GF Plant - Ontario Country: United States **The J.R. Simplot Company is proud to be an Equal Opportunity Employer and will consider all qualified applicants for employment without regard to race, color, religion, national origin, ancestry, age, sex, gender, gender identity, gender expression, genetic information, physical or mental disability, medical condition, sexual orientation, military or veteran status, marital status, or any other protected status. **

JTMEC is committed to providing a diverse range of reliable, safe and innovative electrical services and products to the Mining and Civil & Construction industries. As part of the global Epiroc Group, with multiple branches across Australia and over 250 employees, we have the resources, equipment, safety record and experience to take on any electrical challenge. THE OPPORTUNITY: We are currently seeking experienced and qualified Electricians to join our high performing team based in Orange NSW. This is a permanent full-time opportunity offering above-award pay, penalties, and flexible roster options for motivated electricians looking for secure, long-term work What's on offer: * Permanent full-time employment * Above-award rates + penalties * Standard 5/2 roster (Monday-Friday) * Flexible 7/7 or 2/2 rosters available * Project-based roster flexibility * Strong safety-first, ZERO-harm culture What you'll need * Current NSW Electrical Licence * Current Driver's Licence * Be located in Orange or willing to relocate * Strong knowledge of electrical standards * Proven fault-finding skills and ability to read drawings * Reliable, self-motivated, and takes pride in workmanship * Ability to work independently and as part of a team Highly regarded (but not essential) * Working Safely at Heights * Confined Space Ticket * High Risk Work Licence - WP * LVCPR * White Card If you're ready to take the next step in your electrical career, apply today and join a company that invests in your future. ABOUT THE REWARD You will be rewarded with attractive employment conditions and wage rates backed by a successful company who firmly believe that 'our people are our strength'. We are committed to the ongoing investment in your professional development and will offer a rewarding work experience along with training for your professional development. Epiroc is a global productivity partner for mining and construction customers and accelerates the transformation toward a sustainable society. With ground-breaking technology, Epiroc develops and provides innovative and safe equipment, such as drill rigs, rock excavation and construction equipment and tools for surface and underground applications. The company also offers world-class service and other aftermarket support as well as solutions for automation, digitalization and electrification. Epiroc is based in Stockholm, Sweden, had revenues of more than SEK 60 billion in 2023, and has around 18 200 passionate employees supporting and collaborating with customers in around 150 countries. Learn more at *************** JTMEC embraces equal employment opportunities and actively promotes diversity and inclusiveness within the workplace. We encourage female and Indigenous candidates to apply for any opportunity within our business. Epiroc is a global productivity partner for mining and construction customers, and accelerates the transformation toward a sustainable society. With ground-breaking technology, Epiroc develops and provides innovative and safe equipment, such as drill rigs, rock excavation and construction equipment and tools for surface and underground applications. The company also offers world-class service and other aftermarket support as well as solutions for automation, digitalization and electrification. Epiroc is based in Stockholm, Sweden, had revenues of more than SEK 60 billion in 2023, and has around 18 200 passionate employees supporting and collaborating with customers in around 150 countries. Learn more at ***************

Metro RF Services is seeking an experienced Electrician Journeyman who possesses an EVITP (Electrical Vehicle Infrastructure Training Program) certification to join our team. As an Electrician Journeyman with this specific certification, you will be responsible for installing, repairing, and maintaining electrical systems and equipment in commercial and industrial settings. The ideal candidate will be a positive, responsible, and team-oriented individual who can work well under pressure and meet deadlines. State Journeyman Card & EVITP are requirements for this position. Responsibilities: Install, maintain, and repair electrical systems, equipment, and components in commercial and industrial settings Troubleshoot electrical issues and recommend appropriate solutions Conduct electrical safety inspections and ensure compliance with local and state codes Read and interpret blueprints, schematics, and technical drawings Collaborate with other team members to complete projects on time and within budget Maintain a safe and organized work environment Provide exceptional customer service and maintain a professional demeanor at all times Requirements Requirements: Valid California State Electrician Journeyman license is absolutely required EV Installation experience Valid EVITP Certification Minimum of 5 years of relevant work experience Knowledge of local and state electrical codes and regulations Ability to read and interpret blueprints, schematics, and technical drawings Strong problem-solving and troubleshooting skills Excellent communication and interpersonal skills Positive attitude, responsible, and team player Ability to work independently and as part of a team Physical ability to lift up to 50 lbs, climb ladders, and work in tight spaces Background check and Drug Screening will need to be cleared A valid driver's license is necessary Benefits: Paid on-the-job training and certification programs Medical, dental, and vision insurance Sick leave Paid Vacation Leave Life Insurance 401K with Employer Match Paid Holidays Referral Program Birthday and anniversary rewards Job Type: Full-time Schedule: Day shift Monday to Friday Night Shift On Call Overtime Weekends Experience: Commercial Electrical: 4 years (Preferred) License: Electrical Journeyman (Required) Work Location: Ontario, CA and surrounding areas Pay Frequency: Bi-weekly This Job Is: A job for which military-experienced candidates are encouraged to apply Open to applicants who do not have a high school diploma/GED Company's website: *************** Benefit Conditions: Only full-time employees are eligible Work Remotely: No If you are an experienced and State Certified Electrician Journeyman with a positive attitude and a strong work ethic, we encourage you to apply. We offer a competitive salary, benefits package, and opportunities for professional growth and advancement. Ability to commute/relocate: Ontario, CA 91761: Reliably commute or planning to relocate before starting work (Required) License/Certification: EVITP certification (Required) Willingness to travel: 25% (Preferred) Metro RF is an Equal Opportunity Employer, committed to diversity and inclusion without discrimination based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or any other protected status under applicable law. We comply with all anti-discrimination laws and ensure that all hiring decisions and employment practices are based on qualifications and merit. Our commitment to providing a harassment-free workplace fosters innovation and respect. Reports of discrimination or harassment are thoroughly investigated and addressed promptly. We value a diverse workforce and maintain an environment where all employees are treated with dignity and respect. By applying, candidates acknowledge their acceptance of these principles. Salary Description 72,800 - 93,600

Job DescriptionBenefits/Perks Flexible Scheduling Competitive Compensation Career Advancement Opportunities We are seeking a skilled Electrician to join our team! You will be responsible for installing and repairing wiring, electrical fixtures, and control equipment, as well as training apprentices on the job. If you are a Journeyman Electrician with a can-do attitude who takes pride in his work, we want to hear from you. Responsibilities: Follow all safety rules and regulations Maintain a clean and safe work environment Use blueprints, sketches, or building plans to determine electrical requirements and materials needed Install new electrical systems and repair existing systems Interact with customers, suppliers, and other professionals Qualifications: Journeyman Electrician License Previous experience in tenant improvement Valid Drivers License Ability to stand for long periods and lift heavy objects Strong understanding of mathematical concepts and measurements Professional appearance and courteous personality Bondable. Flexible work from home options available.

Job DescriptionBenefits: 401(k) Health insurance Opportunity for advancement Looking for guys with 4 years minimum experience on commercial TI work.

Applications will be accepted on a continuous basis until a sufficient number of qualified applications have been received. The deadline for the first review of applications is on Monday, November 27, 2023. Applicants are encouraged to apply early. Applicants that apply after the first review are not guaranteed to be considered for this recruitment. This recruitment may close at any time without notice after the first review date. Under general supervision, installs, maintains and repairs a variety of electrical systems and equipment; works on heating and air conditioning systems; performs related duties as required. CLASS CHARACTERISTICS The Journey Electrician is a single position classification which performs skilled journey level electrical maintenance functions. SUPERVISION RECEIVED Works under the general supervision of the Electrical Foreman or Superintendent. SUPERVISION EXERCISED May exercise technical supervision over Maintenance Electricians. Examples of Essential Functions The following functions are typical for this classification. The incumbent may not perform all of the listed functions and/or may be required to perform additional or different functions from those set forth below to address business needs and changing business practices Installs and repairs conduits, lighting circuits, panels, regulators, generators, relays, circuit breakers, switch boxes and electrical fixtures according to codes; inspects wiring and equipment for safe condition and need for replacement. Installs and repairs public address and intercommunications systems, instrumentations systems, electronic supervisory systems, control apparatus for electrical installations and associated electrical equipment. Installs, repairs and maintains street lighting systems, flood lighting systems and traffic control equipment; replaces light poles; uses HighLift to repair and replace components. Tests circuits for shorts, grounds, open conditions and proper insulation; operates electrical test equipment such as meggers, voltmeters, ammeters and ohmmeters. Maintains and repairs heating and air conditioning systems; installs and maintains thermostat controls, ducts, compressors and electric furnaces. Maintains and repairs electric devices, motors, small generators, controls and panels; repairs portable electrical tools and other small or portable electric equipment. Prepares work estimates for time, materials and labor; reads and interprets wiring diagrams, plans and sketches; completes related records on work performed. Minimum & Desirable Qualifications Training and Experience Any combination of education and/or experience that has provided the knowledge, skills, and abilities necessary. A typical way of obtaining the knowledge and abilities would be graduation from high school or equivalent AND recent completion of an electrician apprenticeship program approved by the State of California or four years of recent responsible experience in installing and repairing electrical systems and equipment. Possession of an IMSA Level I Traffic Signal Technician Certificate and Work Zone Safety Certificate are also required. Possession of or ability to obtain a valid California Class C driver's license and a satisfactory driving record is required. Possession of a valid California Class B driver's license is required within the probationary period. Knowledge, Skills, and Abilities Knowledge of: methods, materials, tools and equipment used in general construction and maintenance electrical work; operation, maintenance and repair of electrical components of traffic signals; applicable building and electrical codes; safety laws and regulations related to electrical work and traffic signals. Ability to: prepare and interpret blueprints, schematic diagrams and sketches; prepare cost and material estimates; operate power tools and equipment; perform mathematical calculations, communicate effectively orally and in writing; understand and follow oral and written directions; work at heights; keep accurate records; establish and maintain cooperative working relationships. Other Important Information California Department of Motor Vehicle (DMV) Pull Notice System An incumbent appointed to this position is subject to enrollment in the California DMV Pull Notice Program. The Pull Notice program provides information on the incumbent's driving record and Driver's License status on a periodic basis to the City of South Gate. An employee assigned a City vehicle must acknowledge receipt and understanding of City Administrative Regulations covering the use of City vehicles. Physical Demands and Work Environment The physical demands and work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to walk, stand, bend, crouch, talk or hear. The employee is frequently required to use hands to finger, handle, or feel objects, tools, or controls; and reach with hands and arms. Incumbents are frequently exposed to hazardous conditions and must occasionally work at heights of 40 to 90 feet. The employee must occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, color perception and the ability to adjust focus. The noise level in the work environment is usually noisy. Incumbents are occasionally exposed to adverse environmental conditions. Application Packets Must Include: A fully completed online employment application which: * Covers at least the past 10 years of employment history (or longer if you have other relevant experience). * Responses to the supplemental questionnaire. * Must be specific in describing your qualifications for this position. Failure to state all pertinent information may lead to elimination from consideration. Stating "See Resume" is not an acceptable substitute for a completed application. * Individuals who require a reasonable accommodation to participate in any phase of the application or selection process must advise Human Resources and make such a request during the application process. Every effort will be made to provide a reasonable accommodation where requested. Selection Process: All application materials received by the application deadline will be reviewed and evaluated. All information supplied by applicants is subject to verification. * Application Review:The first phase will be a detailed review and appraisal of each candidate's application. This phase is for qualifying purposes only. There is no weight assigned to this phase. Those candidates who meet the minimum qualifications may be invited to the next phase. * Written Examination: If a written exam is given, a minimum of 70% must be obtained on the written exam in order to be eligible to continue to the next phase of the selection process which will consist of an oral appraisal interview. * Oral Appraisal Interview:A minimum of 70% must be obtained to pass the oral appraisal interview. * Employment Eligibility List: The Employment Eligibility List will be established after completion of the examination process. Current and future vacancies will be filled from this list. Lists typically last for 12 months, but may be extended or abolished in accordance with the City's Civil Service rules and regulations. Pre-employment Process * The City supports a Drug-Free Workplace. * All potential employees are required to successfully complete a thorough background investigation, fingerprinting, and pass a post-offer pre-employment medical examination (which will include a drug/alcohol screening). * New employees must complete a verification form designated by the United States Department of Homeland Security, Citizenship and Immigration Services, that certifies eligibility for employment in the United States of America. Hiring of Relatives: Relatives of existing employees by blood or marriage will not be eligible for employment with the City if potential supervision, safety, security, or morale problems exist; or if potential conflicts of interest exist. Relatives include an employee's parents, children, spouse, brothers, sisters, in-laws, and step relationships. The provisions of this announcement do not constitute an expressed or implied contract and any provisions contained in this announcement may be modified or revoked without notice. Equal Opportunity Employer The City of South Gate is an Equal Opportunity Employer. In compliance with all applicable Federal and State laws, it does not discriminate on the basis of race, color, national origin, ancestry, marital status, age, religion, disability (mental or physical), medical condition, genetic characteristic or information, sex (including gender, gender identity, gender expression, or pregnancy), sexual orientation (including homosexuality, bisexuality, or heterosexuality), or military or veteran status in its employment actions, policies, procedures, or practices. The City of South Gate The City of South Gate is a busy urban community consisting of residential, commercial, and industrial development, spread over 7.41 square miles. It is currently ranked the 79th largest city in California with a population of approximately 97,000. Strategically located along the 710 freeway, the City is just 12 miles southeast of downtown Los Angeles.

Job Title: Maintenance Electrician Duration: Contract 4 Months, Possible to Direct Shift: 6:00 A.M. - 2:30 P.M. Responsibilities: Under general direction, is responsible for repairing, maintaining and installing all types of electrical systems for production equipment, support equipment, and facilities. Ensures work performed is in compliance with National Electrical Code and OSHA regulations. Reviews work orders and determines electrical modifications per specifications. Inspects new parts to determine if it meets work order specifications Ensures any wiring of new and rebuilt equipment complies with National Electrical Code and OSHA regulations. Performs preventative maintenance and maintains a clean and safe work area. Performs other related duties as assigned or requested First shift, but flexibility is preferred. On call one week per month for emergency maintenance. Qualifications *High school diploma, general education degree (GED) or equivalent *Vocational/Specialized training or Certification in Electrical System Repair and maintenance. *2 years related experience; mechanical and electrical industrial maintenance experience in industrial environment highly preferred *PLC knowledge would be a plus Additional Information All your information will be kept confidential according to EEO guidelines.

Details: Purpose and Scope: The Electrician is responsible for building, testing and maintaining AC and DC power systems. They troubleshoot power plant, transformer and generator systems, diagnose customer alarms, remove and install various battery systems and utilize preventative maintenance skills. Details: Responsibilities: Ensures all required paperwork is submitted to complete jobs daily. Ensures safe transportation of personnel and material to and from remote job sites daily. Ensures all Federal, State and local laws are followed at all times. Ensures compliance with both company and customer policies at all times. Installs, troubleshoots and removes battery power systems, batteries, A panels, transformers, generators, alarms and various interconnect/transport equipment. Performs preventative maintenance, as required. All other duties as required. Skills / Other: Basic time management and organizational skills required. Computer Networking experience. Schedule flexibility Able to travel (locally). Experience: Minimum 7-10 year of experience, strongly preferred. Pay: $30 - $40/hr #MCTA1

Join Our Talent Network - Future Opportunities in HVAC & Plumbing! Are you a skilled HVAC Technician, Plumber, or hopeful apprentice looking for your next career move? Service Champions is always looking for top talent to join our growing teams! Our next wave of training classes opens in January, with interviews starting soon! Apply to be reached out by a recruiter Training: Paid Training From Industry Experts Ride-alongs for Hands-on Learning Learn an Economy Proof Trade Company Tools and Uniform Provided Benefits: Hourly Pay + Commission Earning Potential Health insurance: Comprehensive medical, dental, and vision coverage. Retirement plan: 401(k) with company match. Paid time off: Generous vacation, holidays, and sick leave. Training and development: Ongoing opportunities for professional growth and advancement. Company culture: A supportive, inclusive, and dynamic work environment focusing on teamwork and employee satisfaction. Why Join Our Talent Pool? ✅ Be the first to hear about new job openings ✅ Get exclusive updates on company news & hiring events ✅ Fast-track your application when positions open up Who Should Apply? ✔ Experienced and entry-level HVAC and plumbing professionals ✔ Customer-focused individuals who take pride in quality workmanship ✔ Those interested in career growth and professional development How to Apply Submit your resume today, and we'll reach out when a role that matches your skills and experience becomes available! #CGHP About Service Champions: A career with Service Champions can change your life. Recognized as one of Orange County's top places to work, many of our employees have shared that they love working here and the success it has brought them. You can be proud to be a part of Service Champions. We are a nationally recognized residential heating and air conditioning company that serves Southern California homeowners. Because our clients love our service and friendliness, we continue to grow at a rapid pace, which means terrific opportunities for people with a great attitude and a heart for service. We are an equal opportunity employer committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, or any other protected characteristic outlined by federal, state, or local laws. Additionally, we will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the California Fair Chance Act and the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance.

Since 1996, Boudreau Pipeline Corporation continues to be Southern California's premier pipeline company that provides quality solutions and installations for wet utilities including sewer, water, storm drain systems and fire lines. We specialize in both conventional and highly complex pipeline projects for leading commercial, industrial, and residential builders, municipalities, utilities and contractors. As a proud partner with the Laborers' Union, we continue to provide the best support to our team of employees, their families, and our community. Surveyed as a Top Workplace for the 8th year in a row by our Employees, we continue to provide superior on-the-job training, career advancement, safety and a dynamic company culture while practicing our Guiding Principles; Mutual Respect, Accountability and Responsibility. Come join our family, We Dig Your Future! We are looking for an Electrician Laborer to join our expanding team! The Mobile Home Park (MHP) Electrician Laborer is responsible for assisting in installing, repairing, maintaining and testing electrical systems while maintaining compliance with nationals, state and local electrical codes and company policies and procedures. Responsibilities * Installation of electrical wiring, equipment, or fixtures, based on job specifications and local codes. * Ensures a safe work environment in compliance with all safety policies and procedures using the appropriate tools and equipment for the task. * Properly follows all company policies and OSHA/MSHA regulations for safe working procedures and environment. * Reports any problems to the Foreman, Superintendent, Safety Manager, or Human Resources Manager. * Signals operators of construction equipment to facilitate alignment, movement, and materials. * Follows direction of Foreman for daily tasks and expectations for each specific project or jobsite * May be called upon to run small power tools such as jack hammer, drills, grinders, etc. * Digs, spreads, and levels construction materials, tools and supplies. * Lifts, carries and holds material, tools and supplies. * Maintains regular and predictable attendance at assigned times is required. * Connect wires to circuit breakers, transformers, or other components (not energized). * Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, to ensure compatibility and safety of system * Use a variety of tools or equipment, such as power construction equipment, measuring devices, power tools, and testing equipment, such as ammeters, or test lamps. * Work from ladders, scaffolds, or roofs to install, maintain, or repair electrical wiring, equipment, or fixtures. * Place conduit, pipes, or tubing, inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes. * Fasten small metal or plastic boxes to walls to house electrical switches or outlets. * Construct or fabricate parts, using hand tools, according to specifications. * Perform physically demanding tasks, such as digging trenches to lay conduit or moving or lifting heavy objects. * Other duties as assigned. SAFETY * Responsible for ensuring OSHA standards and company safety policies are always complied with including but not limited to operation of tools, equipment and machinery. * Corrects unsafe conditions in work area and report any conditions that are not correctable to supervisor immediately. Qualifications * Current State of California Electrician Trainee certification required. * A minimum of two to five years of experience working as an electrician on residential, commercial and/or industrial projects. * Basic understanding of residential electrical codes and installation methods * Ability to verify compliance and functionality of installations. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals; ability to listen and comprehend instructions accurately to learn products, processes, safety procedures, installation techniques and equipment use. * Ability to add, subtract, multiply and divide all units of measure, including whole numbers, common fractions, and decimals. Pay range: $24.00 - $30.00/hr depending on experience

Job DescriptionBenefits: 401(k) 401(k) matching Bonus based on performance Company parties Competitive salary Dental insurance Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Vision insurance About Our Company At Polar Express we provide the highest quality of service to ensure Exceptional Comfort, Efficiency, and Indoor Air Quality. Above all, We seek to gain the trust of every client in every city. We pride ourselves on being trustworthy and fair. We stand firmly on our core values F.A.I.R. Family- We will treat our customers and everyone in our community and organization as family. Accountability- We are accountable to each other by making sure our clients receive the highest quality of work and service on every job we perform. Integrity- Every Decision we make and action we take involves transparency through a high degree of Integrity. Respect- We have the utmost respect and confidence in our employees to carry our customers vision for every project. Job Summary In this position, the apprentice/helper will assist the technician as needed with installation, maintenance, inspections, and light repair. This is an entry level position. The primary goal of this role is to learn all aspects of the trade. Our company offers on-the-job training and yearly wage increases as your skills develop. Starting pay is determined upon skills and experience. Essential Duties and Responsibilities The essential functions include, but are not limited to the following: Assist the technician with light repair and installation work. Observe and learn all aspects of the trade. Wear floor savers while in the clients home and maintaining a neat work area when performing a repair or scheduled service. Show yourself as professional and knowledgeable to win new referrals and repeat business. Always be courteous, respectful, and pleasant to the customer. Be accurate and timely with all paperwork. Obey the company Code of Ethics and the Team Rules. Maintain a clean, organized job site and well inventoried truck. Always be safety conscious both on the job and while driving. Participate actively in all training exercises, morning meetings and retreats. Minimum Qualifications Positive attitude Mechanical Aptitude Clean, professional appearance Good communication skills A willingness to work hard Ability and willingness to learn Ambition to achieve Able to work both independently and as part of a team Strong customer service skills Physical Demands and Work Environment Physical Demands: Climbing up and down on ladders and equipment Ability to lift 50 pounds Ability to pick-up a minimum of 25 pounds consistently and carry up to 250 feet unassisted Operate handheld power tools Wear personal protective equipment Ability to work more than 40 hours per work week and up to 12 hours per day Working Environment: Work outside in all weather conditions Ability to work on concrete floors and uneven surfaces for up to 8 hours May work in awkward environments and will have to always carry all required equipment and supplies. Sensory demands include exposure to the smells associated with sewer and water, exposure to the sounds associated with power tools and construction sites, and exposure to dust and other debris associated with the use of power tools and current home conditions, all of which can cause sensory strain including headaches

QSC is creating exceptional, people-centric experiences with the perfect balance of technology and creativity. Q-SYS, our innovative full stack audio, video and control platform, unifies data, devices and a cloud-first architecture, empowering organizations to deliver transformative AV experiences across built spaces. Building on the QSC legacy, QSC Audio delivers audio technology that empowers live entertainers and sound reinforcement professionals with the confidence to create and deliver memorable experiences for their audiences. Atrius, Distech Controls and QSC are part of the Acuity Intelligent Spaces (AIS) business segment. Our mission is to make spaces smarter, safer and greener through our strategy of connecting the edge with the cloud using disruptive technologies that leverage data interoperability. Acuity Inc. (NYSE: AYI) is a market-leading industrial technology company. We use technology to solve problems in spaces, light and more things to come. Through our two business segments, Acuity Brands Lighting (ABL) and Acuity Intelligent Spaces (AIS), we design, manufacture, and bring to market products and services that make a valuable difference in people's lives. We achieve growth through the development of innovative new products and services, including lighting, lighting controls, building management solutions, and an audio, video and control platform. We focus on customer outcomes and drive growth and productivity to increase market share and deliver superior returns. We look to aggressively deploy capital to grow the business and to enter attractive new verticals. Acuity Inc. is based in Atlanta, Georgia, with operations across North America, Europe and Asia. The Company is powered by approximately 13,000 dedicated and talented associates. Visit us at ****************** Job Summary QSC is seeking an experienced and motivated Senior Electrical Engineering Technician who is interested in audio and video to work in our Q-SYS division. QSC is one of the world's leading designers and manufacturers of networked audio, video, and control systems. QSC is a friendly and laid-back environment where "Work Hard and Enjoy Life" is literally one of the corporate values. This position is located in the Costa Mesa, California headquarters, and is a full-time hands-on laboratory position that is not eligible for remote or hybrid work. The primary duty of the Senior Electrical Engineering Technician is in-depth testing and qualification of QSC products, with an emphasis on networked audio and video electronics. The technician is also responsible for supporting the engineering staff with prototyping, design troubleshooting, and failure analysis, plus circuit repair and modification. Secondary duties of the Senior Electrical Engineering Technician are test fixture creation and laboratory maintenance. The Senior Electrical Engineering Technician must have an advanced understanding of electronics and electronic circuit troubleshooting. Experience with Class D audio amplifiers, SMPS power supplies, Power over Ethernet, high-speed networking, and video circuitry is preferred. Key Tasks & Responsibilities (Essential Functions) * Formal test and qualification of QSC products * Power, analog, and digital circuitry failure analysis, troubleshooting, repair, and modification * Prototyping of circuits and design of test fixtures and assemblies * Maintain the hardware engineering laboratories at QSC Education (minimum education required) Associate of Science Preferred Education (i.e. type of degree) Bachelor of Science in Electrical Engineering Skills and Minimum Experience Required * Minimum of an Associate's Degree in ET required, BSET or BSEE preferred * 5+ years relevant experience in electronic circuit testing, troubleshooting, and repair, utlizing test equipment including signal generators, analyzers, oscilloscopes, and multi-meters * Excellent troubleshooting and failure analysis skills required * Excellent through-hole and SMD soldering skills required, hand rework of BGA packages a plus * Excellent organizational skills required * Excellent critical thinking and decision-making skills required * Excellent computing skills required * Experience reading schematics and PCB layout files required, PCB design experience a plus * Good communication skills in English required, both written and oral * Ability to produce results in a dynamic work environment required * Must be self-motivated in order to achieve assigned objectives with minimal supervision * Scripting experience (C++, Python, Lua) a plus Physical Requirements * Light work QSC. is owned by Acuity Inc., which is located in the United States. These companies share a global recruitment system on which the data you provide will be stored, and which will be subject to the laws of the United States of America. The range for this position is $73,400 to $120,000. Placement within this range may vary, depending on the applicant's experience and geographic location. Acuity offers generous benefits including health care, dental coverage, vision plans, 401K benefits, and commissions/incentive compensation depending on role. For a list of our benefits, click here. We value diversity and are an equal opportunity employer. All qualified applicants will be considered for employment without regards to race, color, age, gender, sexual orientation, gender identity and expression, ethnicity or national origin, disability, pregnancy, religion, covered veteran status, protected genetic information, or any other characteristic protected by law. Please click here and here for more information. Accommodation for Applicants with Disabilities: As an equal opportunity employer, Acuity Inc. is committed to providing reasonable accommodations in its application process for qualified individuals with disabilities and disabled veterans. If you have difficulty using our online system due to a disability and need accommodation, you may contact us at **************. Please clearly indicate what type of accommodation you are requesting and for what requisition. Any unsolicited resumes sent to Acuity Inc. from a third party, such as an Agency recruiter, including unsolicited resumes sent to an Acuity Inc. mailing address, fax machine or email address, directly to Acuity Inc. employees, or to Acuity Inc. resume database will be considered Acuity Inc. property. Acuity Inc. will NOT pay a fee for any placement resulting from the receipt of an unsolicited resume. Acuity Inc. will consider any candidate for whom an Agency has submitted an unsolicited resume to have been referred by the Agency free of any charges or fees. This includes any Agency that is an approved/engaged vendor, but does not have the appropriate approvals to be engaged on a search. E-Verify Participation Poster e-verify.gov eeoc.gov Nearest Major Market: Orange County Nearest Secondary Market: Los Angeles Job Segment: Electrical Engineering, Maintenance, Cloud, Machinist, Electrical, Engineering, Manufacturing, Technology

Job Posting Start Date 12-05-2025 Job Posting End Date 02-26-2026 Crown Technical Systems, a Flex Company, is a leader in power distribution and protection systems concentrating on sophisticated, state-of-the-art relay and control panels, medium voltage switchgear, and enclosures (power/control buildings/ E-Houses). We specialize in customized, turn-key solutions that ensure safe, secure, and reliable power distribution. Working at Crown Technical Systems offers a dynamic and rewarding career path for individuals seeking to power the world. Through hands-on training, mentorship, and a culture of internal promotion, we empower you to reach your full potential and contribute to projects that truly matter. Job Summary To support our extraordinary teams who build great products and contribute to our growth, we're looking to add a/an Electrical Test Technician in USA, Fontana Ca. Reporting to the Electrical Engineering Manager, the Electrical Test Technician is responsible for completing electrical testing of products during the manufacturing process based on established testing procedures. What a typical day looks like: Follow AC/DC schematics and wiring diagrams to do testing of main electrical distribution AC/DC systems Perform testing on various systems including HVAC system, lighting, receptacles, fans, fire alarm systems, battery system, and meggering of cables Work closely with engineering and production team members to ensure accurate, efficient and timely execution of required testing work Be able to troubleshoot assembly, wiring and testing problems Drafts detailed technical reports to present findings; based on findings, recommends modifications needed to correct production problems Perform other related duties as assigned The experience we're looking to add to our team: High school diploma or equivalent; associate's degree in electrical engineering or related field preferred. 2+ years' experience in electrical testing or related field Knowledge in testing of three phase AC and DC control circuits. Good working knowledge of standard electrical testing and measuring equipment Knowledge of Electrical Safety Procedures and NEC Codes Excellent verbal and written communication skills with the ability to discuss product flaws in a constructive and positive manner. Excellent interpersonal skills. Excellent organizational skills and attention to detail. Strong analytical and problem-solving skills. Proficient with Microsoft Office Suite or related software to prepare test reports and proposals. What the physical requirements are: Periods of standing, walking, and sitting at a desk using a computer Must be able to lift up to 30 pounds at a time Must be able to traverse production facility to complete testing Must wear PPE, such as gloves, safety glasses, hard hat, and ear protection, while working on the production floor #LI-GB1 What you'll receive for the great work you provide: Full range of medical, dental, and vision plans Life Insurance Short-term and Long-term Disability Matching 401(k) Contributions Vacation and Paid Sick Time Tuition Reimbursement Pay Range (Applicable to California)$21.30 USD - $28.75 USD HourlyJob CategoryProduction Engineering Is Sponsorship Available? No Crown is an Equal Opportunity Employer and employment selection decisions are based on merit, qualifications, and abilities. We do not discriminate based on: age, race, religion, color, sex, national origin, marital status, sexual orientation, gender identity, veteran status, disability, pregnancy status, or any other status protected by law. We're happy to provide reasonable accommodations to those with a disability for assistance in the application process. Please email accessibility@flex.com and we'll discuss your specific situation and next steps (NOTE: this email does not accept or consider resumes or applications. This is only for disability assistance. To be considered for a position at Crown, you must complete the application process first).