Electrical apprentice jobs in Vernon, CT - 93 jobs

The TSUBAKI name is synonymous with excellence in quality, dependability and customer service. U.S. Tsubaki Automotive, LLC is an international tier-one supplier of high-speed chain drive systems to the automotive industry. The Electrician II, will be responsible for planning and performing all electrical work associated with the installation, maintenance, troubleshooting, and repair of production machinery, facility electrical equipment (panelboards, transformers, lighting, etc.), and general wiring located throughout the facility. Essential Duties and Responsibilities: The essential duties and responsibilities of this job are included but not limited to this job description - other tasks may be assigned and expected to be performed. Utilize PLC software for the purposes of troubleshooting manufacturing machinery Perform facility and manufacturing machinery preventive maintenance (PM) activities Identify and recommend energy-saving initiatives Identify and recommend safety, PM, and process improvements Install and maintain network wiring Working safely following all safety regulations, including but not limited to NFPA70E Standard For Electrical Safety In The Workplace and the MA Electrical Code Ensuring all work conforms to MA Electrical Code and is completed in a neat and workmanlike manner Working closely with production personnel, engineering, mechanics, and contractors to complete assigned tasks or projects Utilize maintenance management system to monitor electrical maintenance requests and document all work completed Working on ladders or lifts as required Use of various testing instruments to identify issues on power and control circuits or devices THE ABOVE DESCRIPTION COVERS THE MOST SIGNIFICANT DUTIES PERFORMED BUT DOES NOT EXCLUDE OTHER OCCASIONAL WORK ASSIGNMENTS NOT MENTIONED, THE INCLUSION OF WHICH WOULD BE IN CONFORMITY WITH THE FACTOR DEGREES ASSIGNED TO THIS JOB. Requirements High school diploma or equivalent preferred; equivalent relevant experience may be considered 5+ years of Industrial experience MA Licensed Electrician - Class B (Journeyman) or Class A (Master) Ability to interpret electrical and technical diagrams and documents Ability to utilize various types of electrical testing instruments (power/control/calibration) Good verbal and written communication skills Ability to follow verbal and written instructions Troubleshooting skills Highly customer service focused The ability to communicate and work collaboratively with all levels of the organization Microsoft Office experience with emphasis on Outlook General Computer Skills required Ability to use the CMM system to document maintenance service requests U.S. Tsubaki offers: A competitive compensation package, including medical and dental benefits, life insurance, and generous 401(k) match and profit sharing. Paid vacation time Step increases Shift differential pay Weekly pay Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 Salary Description $43.52 - $50.05 / Hour

> Employees Apply Here" onclick="window.location.href = '****************************** InternalUser=true&locale=en_US/';"/> Building & Bridges (B&B) Electrician (New Hire) - 90400268 - Groton, CT Company: Amtrak Your success is a train ride away! As we move America's workforce toward the future, Amtrak connects businesses and communities across the country. We employ more than 20,000 diverse, energetic professionals in a variety of career fields throughout the United States. The safety of our passengers, our employees, the public and our operating environment is our priority, and the success of our railroad is due to our employees. Are you ready to join our team? Our values of 'Do the Right Thing, Excel Together and Put Customers First' are at the heart of what matters most to us, and our Core Capabilities, 'Building Trust, Accountability, Effective Communication, Customer Focus, and Proactive Safety & Security' are what every employee needs to know and do to be most impactful at Amtrak. By living the Amtrak values, focusing on our capabilities, and actively embracing and fostering diverse ideas, backgrounds, and perspectives, together we will honor our past and make Amtrak a company of the future. Job Summary Responsible for inspection, testing and maintenance of electrical, electronic and HVAC systems on rolling stock equipment and components in accordance with FRA and Amtrak standards and guidelines. Essential Functions * Performs inspection, testing and maintenance in accordance with 49CFR regulations and Amtrak standards and guidelines * Utilizes a variety of test equipment, PC, and graphic information to diagnose malfunctions, troubleshoot and qualify components and circuits to determine corrective actions and causes of equipment failures * Repairs and/or replaces doors, electronics, signs, pantographs, and HVAC systems * Installs components such as motors, generators, switches, relays, batteries, and transformers * Performs approved electrical modifications and repairs or replaces components, as necessary * Troubleshoots equipment to determine corrective actions and causes of equipment failures * Maintains proper care and use of materials, test equipment, machines and hand tools normally associated with assigned job * Works on electrical systems and components with AC and DC voltage Minimum Qualifications * HVAC experience * High School Diploma or GED * Valid driver's license is required at time of hire. * Experience in electrical repairs, and testing advanced electrical/electronic systems and reading, drafting, and interpreting circuit diagrams, schematics, and mechanical drawings * Experience in both A/C and D/C electrical systems * Must successfully complete training and attain/retain certifications applicable to assigned job * Knowledge of mechanical and electrical systems * Ability to troubleshoot using schematics and multimeters * Knowledge and skill in the use of electrical tools, equipment, and the measurements necessary to meet established standards * Some computer skills * Must be able to lift items weighing up to 50lbs Preferred Qualifications * Experience in the maintenance of railroad equipment * Completion of technical school or apprenticeship program Communications and Interpersonal Skills * Must have excellent verbal and written communication skills The hourly range is $29.90 - $39.86 (with opportunity for increases, as per the applicable collective bargaining agreement, after beginning employment). Amtrak offers a comprehensive benefit package that includes health, dental and vision plans; wellness programs; flexible spending accounts; 401K retirement plan; life insurance; paid time off; reimbursement of education; Public Service Loan Forgiveness eligibility; Railroad Retirement sickness and retirement benefits; and rail pass privileges. Some benefits are subject to the collective bargaining agreement. Learn more about our benefits offerings here. Requisition ID:165466 Posting Location(s):Connecticut Relocation Offered:No Travel Requirements:Up to 25% You power our progress through your performance. We want your work at Amtrak to be more than a job. We want your career at Amtrak to be a fulfilling experience where you find challenging work, rewarding opportunities, respect among colleagues, and attractive compensation. Amtrak maintains a culture that values high performance and recognizes individual employee contributions. Amtrak is committed to a safe workplace free of drugs and alcohol. All Amtrak positions requires a pre-employment background check that includes prior employment verification, a criminal history check and a pre-employment drug screen. Candidates who test positive for marijuana will be disqualified, regardless of any state or local statute, ordinance, regulation, or other law that legalizes or decriminalizes the use or possession of marijuana, whether for medical, recreational, or other use. Amtrak's pre-employment drug testing program is administered in accordance with DOT regulations and applicable law. In accordance with DOT regulations (49 CFR § 40.25), Amtrak is required to obtain prior drug and alcohol testing records for applicants/employees intending to perform safety-sensitive duties for covered Department of Transportation positions. If an applicant/employee refuses to provide written consent for Amtrak to obtain these records, the individual will not be permitted to perform safety-sensitive functions. In accordance with federal law governing security checks of covered individuals for providers of public transportation (Title 6 U.S.C. §1143), Amtrak is required to screen applicants for any permanent or interim disqualifying criminal offenses. Note that any education requirement listed above may be deemed satisfied if you have an equivalent combination of education, training and experience. Amtrak is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race/color, to include traits historically associated with race, including but not limited to, hair texture and hairstyles such as braids, locks and twists, religion, sex (including pregnancy, childbirth and related conditions, such as lactation), national origin/ethnicity, disability (intellectual, mental and physical), veteran status, marital status, ancestry, sexual orientation, gender identity and gender expression, genetic information, citizenship or any other personal characteristics protected by law. > Employees Apply Here" onclick="window.location.href = '****************************** InternalUser=true&locale=en_US/';"/>

Schedule - 2nd shift (3PM-11PM) When you join us at Thermo Fisher Scientific, you'll be part of an inquisitive team that shares your passion for exploration and discovery. With revenues of more than $40 billion and the largest investment in R&D in the industry, we give our people the resources and chances to create significant contributions to the world. Advanced Electrician Join Thermo Fisher Scientific in Stafford Springs, CT, as an Advanced Electrician and be part of an ambitious team dedicated to making a world-class impact. You'll have the opportunity to showcase your proven skills and successfully implement innovative solutions in a collaborative environment. Principle Responsibilities Maintain and repair complex electronic equipment and components, including circuit boards, networks, and safety systems. Plan, install, and repair wiring, fixtures, and control equipment, following strict safety procedures and electrical codes. Diagnose and troubleshoot malfunctioning systems using test equipment and hand tools. Lead or participate in performance reviews and Lean events to identify maintenance improvements. Provide production, process, and plant engineering advanced systems expertise. Basic Skill Requirements High School or Trade School Diploma. 3 - 8 years of experience working in an electrical/electronics capacity. Current status of Connecticut electrician's license. Preferred Skill Requirements Professional certifications, military background, and an AS degree in the electrical or electronic field. Experience of 5 to 10 years in an electrical/electronics position. Experience in a manufacturing plant environment. E1/E2 CT electrical license and five years of experience in PLC programming. Join us and contribute to crafting flawless solutions for a healthier, cleaner, and safer world! Compensation and Benefits The hourly pay range estimated for this position based in Connecticut is $31.73-$47.60. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

Shift Industrial Electrician Are you a seasoned professional with hands-on experience in advanced electrical or electronic systems from your time as a Navy Nuclear Electrician Mate or Nuclear Electronics Mate? Take your expertise to the civilian world and join our dynamic client companies, where precision, leadership, and technical mastery are celebrated. We're seeking individuals who can bring their specialized knowledge and training to maintain and enhance cutting-edge systems. Key Responsibilities: Electrical Systems: Diagnose, maintain, and repair electrical systems, power generation equipment, and distribution networks. Electronics: Operate and troubleshoot advanced electronic controls, instrumentation, and automated systems. Preventative Maintenance: Conduct inspections and routine maintenance to ensure optimal system performance and reliability. Team Collaboration: Partner with multidisciplinary teams to solve complex problems, maintain safety standards, and improve system efficiency. Technical Expertise: Provide training and mentorship based on your advanced technical background. What We Offer: Total compensation 80-120K and an excellent benefits package. Opportunities to transition into leadership roles Access to state-of-the-art technology and ongoing professional development. A work culture that mirrors the dedication, discipline, and camaraderie of your Navy career. Qualifications: U.S. Navy experience as a Nuclear Electrician Mate or Nuclear Electronics Mate. Exceptional troubleshooting and technical problem-solving skills in electrical or electronic systems. Strong foundation in safety protocols and operational excellence. Ability to adapt to fast-paced environments while maintaining precision and accuracy.

These are long term permanent positions with a highly respected and growing Employee-owned Design Build Construction Firm! SUMMARY: The Electrician will participate in the installation or maintenance and inspection of electrical systems and associated processes. RESPONSIBILITIES: Regular attendance at assigned location; may include A/Z office or other project site; Prepares sketches showing location of wiring and equipment, or follows blueprints, insuring that concealed wiring is installed before completion of future walls, ceilings and flooring; Measures, cuts, bends, threads, assembles and installs electrical conduit, using such tools as hacksaw, pipe threader and conduit bender; Oversees or participates in wire installation with conduit and cable trays; Installs control and distribution apparatus, such as switches, relays and circuit-breaker panels, fastening in place with screws or bolts, using hand tools and power tools; Connects power cables to equipment, such as motor, and installs grounding leads; Test continuity of circuit to insure electrical compatibility and safety of components, using testing instruments, such as ohmmeter, battery and buzzer, and oscilloscope; Observes functioning of installed equipment or system to determine hazards and need for adjustments, relocation or replacement; Perform other routine duties as directed by workplace leader, electrical panels, and standby generation; Avoid unsightly, hazardous and unreliable wiring, consistent with specifications and local electrical codes, redlining drawings, complete documentation with as found and as left conditions; Must maintain strict adherence to safety rules and quality; Participate in site housekeeping; Interact with co-workers in an attentive courteous manner; Additional duties as directed by management. SKILLS & EXPERIENCE/REQUIREMENTS: * Ability to work independently or as part of a team; * 3 years of Field Experience, trade school or apprenticeship; * Appropriate State journeyman license; * OSHA 10 certification. A/Z Corporation is an AA/EOE Employer

Job DescriptionBenefits: 401(k) matching Health insurance Paid time off Signing bonus Training & development Industrial Electrician Traveling (CT Licensed) Pay: $42 $48/hour starting, plus travel stipend and bonus opportunities Signing Bonus: $2,500 About Us Electrisource Corp is a Connecticut-based electrical contracting company specializing in industrial and government projects. Were growing and looking for skilled, motivated electricians who want to expand their expertise into the industrial sector. If you hold a valid Connecticut journeymans license, we can provide the industrial training you need to succeed. Position Overview In this role, youll work both locally in CT (about 50% of the time) and at out-of-state job sites (about 50% travel). Youll perform a variety of industrial electrical work, including installations, troubleshooting, and maintenance, with opportunities to learn advanced industrial systems. Key Responsibilities Run rigid conduit and pull wire/cables Install cable tray systems Work from blueprints and schematics Install control wiring and build panels Install LED lighting systems Operate aerial lifts safely Wire PLCs and control cabinets Install, terminate, and test fiber optic cables Work collaboratively with team members on large projects Qualifications Must have a valid Connecticut Journeyman Electricians License Strong desire to learn industrial electrical work Positive attitude and willingness to travel Ability to lift up to 60 pounds Able to work effectively in a team environment Industrial experience preferred but not required we will train the right candidate Compensation & Benefits $42 $48/hour starting pay (based on experience) $2,500 signing bonus $5.00/hour travel stipend All travel expenses paid by the company Annual performance bonus (36% of annual pay) 401(k) with 5% company match Health, vision, and dental insurance Paid time off holidays and vacation Why Join Us? This is an opportunity to work on large-scale, complex industrial projects while developing skills that will set you apart in the electrical trade. We value our team members, invest in their training, and reward them for performance.

Job DescriptionMeriden electrical contractor seeking Licensed Journeyman for fulltime employment. Pay based on experience. Benefits include vacation,, holiday, medical, dental and vision, & life insurance, retirement plan/match. Additional life insurance & Aflac available.

One Allied Way Manchester, CT 06042 Allied Printing Services Inc. is a family-ran, full-service commercial and financial printer that's been leading the industry since 1949. With advanced sheetfed, web, large format, digital press capabilities - plus New England's largest bindery/finishing operation - we're proud of our history and excited about our future. Now, we're looking for a skilled Electrician to join our growing team. Energize our Operations and Keep Printing Running. The Electrician is responsible for installing, maintaining, troubleshooting, and repairing electrical systems and equipment that support print production, finishing, and facility operations. This role ensures presses, bindery equipment, and plant systems operate safely, efficiently, and with minimal downtime. Working closely with maintenance and production teams, the Electrician plays a key role in keeping operations running smoothly while supporting continuous improvement, safety compliance, and long-term reliability in a fast-paced printing manufacturing environment. What You'll Do Perform electrical troubleshooting, diagnosis, and repair on presses, bindery equipment, and facility machinery. Maintain, install, and repair electrical components such as motors, drives, PLCs, sensors, switches, and control systems. Conduct routine electrical and mechanical preventive maintenance to minimize downtime. Read and interpret electrical schematics, diagrams, and technical documentation. Assist with machine setup, calibration, and system adjustments as needed. Collaborate with production teams to identify and resolve equipment issues quickly. Ensure compliance with safety standards, lockout/tagout procedures, and company policies. Maintain detailed maintenance logs and documentation. Support facility electrical needs, including lighting, circuitry, and power distribution. What You Bring Electrical License required. High School Diploma or equivalent required; technical school or electrician certification preferred. 1-5 years experienced printing or manufacturing. Strong knowledge of AC/DC motors, drives, control circuits, and PLC troubleshooting. Experience working with mechanical, pneumatic, and hydraulic systems. Ability to read electrical blueprints and technical schematics. Strong problem-solving skills and ability to work independently. Solid understanding of safety practices and electrical codes. Excellent communication and teamwork skills. Physical Requirements Walking 50% | Standing 50% | Lifting, pushing, pulling or carrying 25-50 lbs. and more. | Ability to stand for extended periods. | Safely move materials weighing 500-750 lbs.| Using manual pallet trucks | Driving, sitting, standing, walking, while operating a fork truck. Ability to lift, move, and position materials throughout the workday and safely operate warehouse equipment for extended periods. Frequent bending, reaching, and handling of materials. The Details Job Type: Full Time Shifts Available: 1st shift (8:00am- 4:00pm) Why You'll Love Working Here You'll join a supportive team that values innovation, teamwork, and growth. We're proud of our history but even more excited about the future - and we're looking for motivated people like you to help us get there. If you meet our minimum qualifications and are eager to thrive in a fast-paced, growing environment, we invite you to become part of our team. This is an excellent opportunity to build your career with a company that combines decades of expertise with a commitment to innovation and exceptional service. Great Benefits: Medical, Dental, Vision, Life Insurance, Disability, 401(k), 401(k) match, Employee Assistance Program, Voluntary Benefits: Critical, Accident, Hospital Indemnity, Paid Time Off: Vacation, Sick, Holiday, 2nd (12%) & 3rd (15%) shift differentials, Paid Weekly, Growth Opportunities, Employee Referral Bonus, Work-Life Balance, Great Company Culture. Allied Printing Services is an equal opportunity employer. All qualified applicants and employees are considered for employment without regard to race, color, religion, age, sex, sexual orientation, gender identity, national origin, genetic information, disability, military or veterans' status or any other legally protected status or basis prohibited by applicable federal, state, or local laws. Allied Printing Services prohibits harassment of applicants and employees based on these protected categories. If you need an accommodation to apply, please let us know.

First consideration will be given to those applicants that apply within the first 14 days. Minimum Entrance Requirements\: Applicants must have at least one year of full-time, or equivalent part-time, experience as a licensed journeyman or master electrician. Special Requirements\: Possession of a current and valid Massachusetts Journeyman or Master Electrician's License issued by the State Examiners of Electricians.* *NOTE\: License requirement regarding the Department of Public Works\: Neither general street lighting nor traffic work performed by the Department of Public Works or its agents or employees on public ways is subject to licensing requirements of M.G.L. Chap. 141. 1976 - 1977 Op AG, No. 26. Based on assignment, possession of a current and valid Massachusetts Class 3 Motor Vehicle Operator's License. Comprehensive Benefits When you embark on a career with the Commonwealth, you are offered an outstanding suite of employee benefits that add to the overall value of your compensation package. We take pride in providing a work experience that supports you, your loved ones, and your future. Want the specifics? Explore our Employee Benefits and Rewards! An Equal Opportunity / Affirmative Action Employer. Females, minorities, veterans, and persons with disabilities are strongly encouraged to apply. The Commonwealth is an Equal Opportunity Employer and does not discriminate on the basis of race, religion, color, sex, gender identity or expression, sexual orientation, age, disability, national origin, veteran status, or any other basis covered by appropriate law. Research suggests that qualified women, Black, Indigenous, and Persons of Color (BIPOC) may self-select out of opportunities if they don't meet 100% of the job requirements. We encourage individuals who believe they have the skills necessary to thrive to apply for this role. Agency Overview The Division of Capital Asset Management and Maintenance (DCAMM), which oversees over $2 billion in capital programs and projects, is responsible for capital planning, project delivery, property management, and real estate services for the Commonwealth. We are stewards of the Commonwealth's assets, which include 5.5 million square feet of state buildings. As an agency, we care for the people of our state and the future of our planet. We work with state agencies to create and manage forward-thinking, sustainable buildings to meet the needs of the Commonwealth's citizens and help achieve a zero-carbon future. We are partners with fellow agencies to help them meet their strategic needs with fiscally responsible building and real estate solutions. We support the growth of the Commonwealth's economy and actively engage with private sector partners to make it easier to do business with the Commonwealth. We work to expand access, opportunity, and equity to create more inclusive services, planning and outcomes for all the citizens of the Commonwealth. DCAMM is a central agency in implementing several key policy priorities of the Healey-Driscoll Administration, including promoting decarbonization and climate resilience in all state facilities, identifying and facilitating opportunities to repurpose underutilized state property for housing production, and increasing the participation of underrepresented groups in public construction contracting and in the public construction workforce. Position Summary DCAMM is seeking an Electrician II who plans layouts, prepares diagrammatic sketches, and installs, repairs, and maintains electrical systems and equipment. The incumbent troubleshoots electrical problems, maintains inventory of equipment and electrical supplies, and determines materials and/or equipment for assigned projects. The Electrician II maintains reports regarding time and production, repairs, and cost analysis. This is an Emergency Personnel position; the incumbent is expected to report to duty when the Governor states that only Emergency Personnel are to report to their jobs during certain Governor-declared emergencies. Duties for the Electrician II include: Plans layout and installs wiring, electrical fixtures, apparatus, and control equipment, with the exception of elevator control equipment; plans new or modified installations to minimize waste of materials, to provide access for future maintenance, to avoid unsightly, hazardous and unreliable wiring and to conform with specifications and electrical codes. Repairs and maintains electrical equipment, such as motors, generators, transformers, regulators, wiring, switches, alarm systems and control equipment, by locating and determining the reason for malfunction, through the use of testing instruments, such as generators and heaters for the purpose of determining safety and efficiency. Prepares sketches to identify the location for all wiring and equipment, or follows previously prepared diagrams and blueprints, to ensure that concealed wiring is installed prior to the completion of future walls, ceilings and floorings. Observes and/or inspects the functioning of installed equipment or systems to detect hazards and need for adjustments, relocation or replacement and repairs faulty equipment or systems, as required. Inspects circuits and wiring for specified shielding and groundings, and repairs or rewires systems in accordance with building codes and safety regulations. Operates and maintains motors, generators, testing, switchboards, and power panels in good order, to avoid malfunctioning. Performs a variety of miscellaneous duties, such as tests and charges storage batteries; reads electric meters and records meter readings; cleans and lubricates electrical machinery and equipment; maintains an inventory of parts and equipment, etc. May supervise Laborers assisting in performing electrical installation, maintenance, and repair duties. Assists in maintenance and security of grounds and buildings as needed. Assist in snow removal operations as required. May attend meetings, seminars, and workshops. Performs other duties as assigned by Facility Manager or Facility Manager Designee. *3rd Shift Position\: 11\:00pm-7\:00am *For more information about employment at DCAMM, please view our RECRUITMENT VIDEO. Apply for a Job Apply for a Job for JAWS Users Create a Profile Create a Profile for JAWS Users System Requirements Tell us about a friend who might be interested in this job. All privacy rights will be protected.

Job DescriptionBenefits: 401(k) Bonus based on performance Company car Competitive salary Dental insurance Free food & snacks Free uniforms Health insurance Opportunity for advancement Paid time off Training & development Benefits/Perks Health Care / Dental & Vision Paid Time Off / Vacation Time Competitive Compensation 401K Options Career Advancement Opportunities Job Summary We are seeking a skilled Electrician to join our team! You will be responsible for installing and repairing wiring, electrical fixtures, and control equipment, as well as training apprentices on the job. If you are a Journeyman Electrician with a can-do attitude who takes pride in his work, we want to hear from you. Responsibilities: Follow all safety rules and regulations Maintain a clean and safe work environment Use blueprints, sketches, or building plans to determine electrical requirements and materials needed Install new electrical systems and repair existing systems Interact with customers, suppliers, and other professionals Qualifications: Journeyman Electrician License Previous experience as an Electrician is preferred Valid Drivers License Ability to stand for long periods and lift heavy objects Strong understanding of mathematical concepts and measurements Professional appearance and courteous personality

Power Distribution Electrician, 1st Shift University of Connecticut, Facilities Operations, Storrs Campus Salary Range: $68,622.00-$87,595.00 Yearly. Link to Power Distribution Electrician Job Specification: https://www.jobapscloud.com/CT/specs/classspecdisplay.asp?ClassNumber=9326TC&R1=&R3= INTRODUCTION UConn's Facilities Operations Department has two job openings for Power Distribution Electrician positions at the Storrs Campus. The Power Distribution Electrician positions are permanent, full-time, 37.5 hours/week positions. The work schedule will be determined by seniority and discussed during the interview. These positions are only open to current UConn NP-2 QCW Electricians that have completed the training requirements of the Power Distribution Electrician job classification. Current QCW Electrical employees who meet all of the minimum qualifications and special requirements of the job specification will be provided with an opportunity for an interview for the positions. In order to be eligible for the positions, current UConn NP-2 QCW Electrical employees must have completed two years of training with an energized voltage over 600 volts, successful completion of Eversource ESOP 100 high voltage training and hold an active E-1 or E-2 license. The hourly rate of pay will be determined based on the employee's current Step of the Pay Plan. These positions are categorized as Emergency Support Services/Essential Staff. Must be willing and able to work during emergency closures/delayed openings due to inclement weather or for significant events that affect campus operations. Applicants must also be willing to respond to emergencies on overtime (nights, weekends and holidays) and must make the commitment to work scheduled shutdowns during regular work hours and on overtime. Please note that Facilities Operations NP-2 employees may also be required to perform job duties as assigned at any of the Regional Campuses. SELECTION PLAN These positions are categorized as “Open to Agency Only”. Current, qualified UConn NP-2 QCW Electricians will be considered for the positions, as well as any other current, qualified NP-2 employees. Applicants must possess and retain a current motor vehicle operator license throughout employment with the University. A current Connecticut E-1 or E-2 license is required, along with Eversource ESOP 100 high voltage certification and both must be retained throughout employment with the University. To Apply: In order to be considered for this job search, you must meet the minimum qualifications as listed on the job opening and must specify your qualifications on your application. PageUp applications will be evaluated to ensure that the Knowledge, Skill and Ability, Special Requirements and Minimum Qualifications sections of the position have been met. Please also be sure to demonstrate how you meet any of the Preferred Qualifications that you may have. Ensure that your PageUp Application is complete and detailed before submitting it. You will not be able to make revisions once your application is submitted into the PageUp system. If applicable, applicants are strongly encouraged to indicate on their application (under the Job-Related Academic, Technical or Vocational Training section of the application) the name(s) of any Educational Institution(s) attended in trade related subjects, and to indicate the title(s) of the in person and/or online course(s) studied, Address, City, State where the Educational Institution(s) are located, the years attended and the number of Credits earned or Diploma Earned. If applicable, applicants are strongly encouraged to indicate on their application (under the Licenses and Professional Certification section of the application) any current trade license(s) and Eversource certification(s) held, along with the issuing agency, license or certification number, date issued and expiration date. Although it is not required, applicants are strongly encouraged to submit a cover letter, resume and a list of three professional, work related references along with their contact information. Important Next Steps Information: At any point during the recruitment process, applicants may be contacted via email and provided an opportunity to submit additional documentation which support their qualification(s) for this position. These documents may include: a cover letter, resume, performance reviews, attendance records, supervisory references, licensure, etc., at the discretion of the hiring department. Applicants must meet the minimum qualifications as indicated to apply for this position. If selected for an interview, you may be asked to supply the names, titles and phone numbers of three, professional, work related references. In addition, applicants may be asked to provide copies of their last two (2) performance appraisals and CORE attendance records. Please regularly check your email provided on your application for notifications. Please check your SPAM and/or Junk folders on a daily basis in the event an email provider places auto-notification emails in a user's spam. EXAMPLES OF DUTIES Performs highly skilled and specialized installation, maintenance and repair work to equipment and machinery used in a power distribution system; Installs, maintains and performs electrical repair work to both overhead and underground power distribution systems such as utility metering systems, circuit breakers, voltage regulators, power transformers, distribution transformers, switchboard wiring and controls, control circuits, insulators, switchers on substation structures and systems, cutouts, re-closers and wiring; Utilizes specialized electrical and computerized equipment and instruments to conduct repairs and analyze power plant electrical generation performance such as a thermal infrared imaging, meters, voltmeters, ammeters and monitors software; Interprets electrical drawings, diagrams and schematics to initiate repairs and verify high voltage switching procedures; Performs necessary safety testing of electrical equipment, performs Lock Out/Tag Out safety procedures; Performs pole work and confined space work; Maintains sub-station and transformers and connections through oil tests and visual inspections; Maintains required records; May diagnose power plant electrical failures and recommend adjustments to Power Plant Operators; Performs related duties as required. KNOWLEDGE, SKILL AND ABILITY Considerable knowledge of and ability to apply standard tools, materials, methods and practices of electrical trade; Knowledge of and ability to utilize specialized equipment such as thermal infrared imagery, metering software; principles and safety practices used in power distribution systems; Skills interpersonal skills; oral and written communication skills; computer skills; Ability to prepare work order estimates; organize and maintain accurate records including computerized databases. MINIMUM QUALIFICATIONS - GENERAL EXPERIENCE Four (4) years of experience performing highly skilled work in the electrical trade area. MINIMUM QUALIFICATIONS - SPECIAL EXPERIENCE Two (2) years of the General Experience must have included some experience in the repair and maintenance of electrical equipment and machinery with an energized voltage over 600 volts. NOTE: For state employees this experience is interpreted at the level of a Qualified Craft Worker (Electrical). MINIMUM QUALIFICATIONS - SUBSTITUTIONS ALLOWED Graduation from a vocational or technical school with a diploma designating completion of subject requirements in a maintenance trade area may be substituted for two (2) years of the General Experience. SPECIAL REQUIREMENTS Incumbents in this class must have up to date Eversource ESOP 100 High Voltage training and certification. Incumbents in this class may be required by the appointing authority to possess and retain licenses, permits and/or certifications. Incumbents in this class may be required to possess and retain appropriate specific education and/or experience to meet various certification requirements. Applicant must possess and retain a current motor vehicle operator license throughout employment with the University. Applicant must possess and retain a current State of Connecticut E-1 or E-2 License throughout employment with the University. Applicant must have the ability to read and interpret mechanical and electrical blueprints for building and utility systems. PREFERRED QUALIFICATIONS Knowledge of and experience working with a Computerized Maintenance Management System (CMMS), preferably AiM. Experience using an IPad. Experience working in a union environment at a college, university or similar entity. Commercial Driver's License, CDL - Class A or B. Experience maintaining high voltage substations. Experience performing mark outs with CBYD and locating high voltage underground cables. Considerable experience and knowledge of Eversource procedures in performing high voltage work. Experience working with 4160 high voltage power systems and high voltage generation plants. Experience working with high voltage cable vaults. Bucket truck operator experience performing maintenance on overhead high voltage equipment. PHYSICAL REQUIREMENTS Incumbents in this class must have adequate physical strength, stamina, physical agility and visual and auditory acuity, and must maintain such physical fitness as to be able to perform the duties. A physical examination may be required. Incumbents in this class will be required to drive and operate motor vehicles, including, but not limited to vans, bucket trucks, box trucks, and pick-up trucks ranging in size from compact, midsize, full-size, and heavy-duty, some of which are equipped with lift gates. Incumbents must have adequate physical strength and agility to walk up and down stairs frequently and climb ladders independently. Must be able to lift, carry and push material weighing up to 75 lbs. Must have the ability to utilize ladders, scaffolding, high-lifts and enter confined spaces. Must be able to inspect, troubleshoot and repair equipment that is part of a wide range of electrical and mechanical systems. Incumbents must possess the ability to utilize tools, perform the required duties set forth above and will be required to wear personal protective equipment (PPE) when necessary. WORKING CONDITIONS Incumbents in this class may be required to lift moderate to heavy weights, use protective equipment such as high voltage apparatus and may be exposed to risk of injury from equipment and extreme weather and/or environmental conditions. The appointing authority may require completion of an asbestos removal program consistent with EPA guidelines for operations and maintenance during employment in this class. Incumbents may be required to use protective equipment such as respirators and safety goggles. APPLICATION INSTRUCTIONS Please apply online at https://hr.uconn.edu/jobs, click on “Faculty & Staff Openings” and search #499010. Although it is not required, applicants are strongly encouraged to submit a resume, cover letter, and a list of three professional, work related references along with their contact information. This job posting is anticipated to be removed at 11:55 p.m. Eastern time on January 28, 2026. All employees are subject to adherence to the State Code of Ethics which may be found at http://www.ct.gov/ethics/site/default.asp Information concerning the University's policies regarding the Cleary Act Statement, Non-Discrimination Policy, Accommodations for Applicants with Disabilities and Recruiting Veterans can be found on UConn's Job page at: https://hr.uconn.edu/jobs/ The University of Connecticut is committed to building and supporting a multicultural and diverse community of students, faculty and staff. The diversity of students, faculty and staff continues to increase, as does the number of honors students, valedictorians and salutatorians who consistently make UConn their top choice. More than 100 research centers and institutes serve the University's teaching, research, diversity, and outreach missions, leading to UConn's ranking as one of the nation's top research universities. UConn's faculty and staff are the critical link to fostering and expanding our vibrant, multicultural and diverse University community. As an Affirmative Action/Equal Employment Opportunity employer, UConn encourages applications from women, veterans, people with disabilities and members of traditionally underrepresented populations.

Under general supervision, coordinate and conduct general electrical repair work and troubleshooting, perform preventive maintenance, installation services and construction work in accordance with safety standards and fire codes. This position works 6:00 PM - 6:00 AM in a critical data center facility. Responsibilities ESSENTIAL DUTIES: Performs assignments in the layout, installation, repair, alteration, and maintenance of a wide variety of complex electrical equipment such as automatic controls, emergency generators, switchboards, transfer switches, lighting systems, fire alarms and smoke detection systems. Analyzes and troubleshoots electrical problems with a wide variety of electrical equipment, replacing defective parts, reassembles effected equipment and tests for proper operation and safety. Performs preventive maintenance as scheduled or required on all types of electrical equipment as recommended by the manufacturer and on site safety programs. Maintains necessary work records including equipment records, logs, and time sheets. Reads and interprets electrical schematics. Insures that all work meets prescribed standards of quality and insures compliance with all laws, safety procedures, policies and codes Detects and reports to the Supervisor any unusual conditions, defective materials, faulty equipment, and equipment operating or installed incorrectly. Identifies and communicates opportunities for improvement, cost savings, productivity/efficiency improvements and safety improvements. Assists other maintenance personnel on projects as directed May perform other duties as assigned. Qualifications SKILLS, EDUCATION AND EXPERIENCE: High School diploma or General Education Degree (GED) required Minimum 2 years related work experience to include industrial environment Licensed E-2 Electrician Working knowledge of electrical systems Ability to read and comprehend complicated blueprints, drawings, schematics, specifications, codes, electrical formulas, and handbooks Must be familiar with the National Electric Codes, electrical theory, and be comfortable working with high voltage three phase circuits, generators, transformers, switchgear Ability to use various testing devices related to the electrical and mechanical trades Ability to work on several projects simultaneously and prioritize work, as required Must have a current valid driver's license Working knowledge of Microsoft computer applications used for compiling data and work records Exceptional interpersonal skills and the ability to function as a team member in a demanding service environment Ability to communicate with customers at all levels of the organization in a professional, effective manner. Salary: $36.05/hr. - $38.46/hr. The hourly rate is between $36.05 and $38.46 per hour, and the anticipated annual base compensation range for this position will be $74,984- $79,996.8 inclusive of required overtime WORKING CONDITIONS: Normal working conditions with the absence of disagreeable elements NOTE: The statements herein are intended to describe the general nature and level of work being performed by employees, and are not to be construed as an exhaustive list of responsibilities, duties, and skills required of personnel so classified. Newmark is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law.

As a Part-Time Electrician at AK Light Electric Corp, you will be responsible for installing, maintaining, and repairing electrical systems in commercial settings. This role requires attention to detail, adherence to safety standards, and the ability to work independently or as part of a team. Key Responsibilities: Install, repair, and maintain electrical wiring, equipment, and fixtures. Ensure all electrical work complies with local, state, and national electrical codes. Troubleshoot electrical issues and implement effective solutions. Read and interpret blueprints, schematics, and technical diagrams. Maintain a clean and safe work environment. Communicate effectively with clients and team members. Qualifications: Valid Electrician license or relevant certification in Connecticut. Proven experience as an electrician, preferably in commercial settings. Strong knowledge of electrical systems, circuits, and safety protocols. Ability to work independently with minimal supervision. Excellent problem-solving skills and attention to detail. Reliable transportation to job sites in New Haven, CT, and surrounding areas. Schedule: Part-time, flexible hours based on project needs. Benefits: Competitive hourly pay. Supportive work environment. Opportunity for growth within the company. How to Apply: Interested candidates are invited to submit their resume and a brief cover letter detailing their experience and availability to the application link.

Who we are For more than 40 years, Reworld has been a leader in sustainable waste solutions, providing our customers with innovative solutions that help them achieve carbon-negative outcomes. Our Vision Reworld is leading the charge to a carbon-negative future through revolutionary sustainable materials management solutions that reduce, reuse, recycle and reimagine waste for the benefit of society and the environment. Our Business Reworld partners with businesses by offering cutting-edge engineering and innovative solutions, to help customers reduce, reuse, recycle and recover value from waste streams and meet or exceed their sustainability goals. Our Value Reworld's differentiator comes from our ecosystem of technology, facilities and partnerships, trusted by the world's largest organizations to reimagine waste management for a smarter, more sustainable world. All that we're missing is you. Apply today! About the role Position Description: We seek a dedicated individual who will safely work as part of a small team to maintain all phases of electrical switch gear, both high and low voltage, as well as all electrical equipment throughout the plant. Must be able to communicate well with groups or individuals to solve problems. Must be a self-starter and able to prioritize work based on plant production requirements. Work independently with minimal assistance and understands safety procedures of electrical equipment. This individual will participate in daily preventative, scheduled, and corrective maintenance activities in a safe, effective, and timely manner related to an electrical generation facility. The Electrician will also perform maintenance work related to the boilers and its associated electrical equipment. This includes preventative, corrective, emergency, warranty service, etc. throughout the facility. The Electrician will identify repairs and documents electrical equipment malfunctions and installs and tests new equipment in accordance with safety standards. Other functions will include preventative maintenance as well as troubleshooting and repair of circuit breakers, motor control centers, generator, transformers, electrical metering, and protective relays and devices. The Electrician will also be capable of testing and troubleshooting AC and DC electrical circuits, motors, circuit breakers, protective relays and other related devices. Perform preventative maintenance on all plant electrical equipment is essential as well as writing comprehensive logs, reports, and procedure manuals. Conducts preventative analysis of electrical systems and equipment updates. Reading, interpreting, and utilizing equipment manuals for technical clarification and requisitioning parts and material is required. The employee will be required to use computer-based programming to access work orders, for both corrective and preventative tasks. Position Requirements: To be considered for this position the individual must have at least five years' experience as maintenance electrician in a power plant other industrial type setting, along with a High School/GED diploma and a valid Driver's License. Must have electrical journeyman's license or strong apprentice training experience. Must have knowledge of: Crane electrical controls Commercial and industrial electrical equipment MCC Controls P&IDs, schematics and equipment manual for electrical equipment installation, trouble shooting, and programming Must be capable of working at high elevations Must be able to spec. out , price and install all sized conduit, junction boxes, wire, etc. for both new projects and for the replacement of existing equipment Computing skills such as Microsoft Word, Excel and Outlook Must be willing to be trained to operate equipment with telescoping boom and scissor lift, and well as other mobile equipment. Must be able to work overtime on a rotating on-call schedule to support plant operations as needed including nights, weekends, and holidays. May be required to work extensive overtime hours during planned and un-planned maintenance. While performing the duties of this job, the employee periodically enters and inspects various plant areas with rotating machinery; is occasionally exposed to moving mechanical parts; precarious places; confined spaces; fumes or airborne particles; toxic or caustic chemicals; risk of electrical shock and vibration. Must be able to work in all locations within the plant, under extremes of hot and cold, and in areas of dust, noise and wet conditions. Must be able to climb a ladder to access equipment and work from heights using fall protection, lift heavy objects up to 50 lbs. and other manual labor to including pushing, pulling, sweeping and shoveling. All Reworld positions require a candidate's ability to perform the duties and responsibilities of the role while upholding Reworld's Values, including (but not limited to) contributing to a safe and inclusive workplace, delivering results through trust, and building breakthrough capabilities. Please note that Level, Title and/or Salary may be adjusted based on the applicant's experience or skills. Our DEI Commitment Reworld is an Equal Opportunity Employer, has developed an Affirmative Action Program (AAP), and will not discriminate against any qualified applicants because of race, color, religion, sex, national origin, sexual orientation, gender identity, disability (including perceived disability, physical, mental, and/or intellectual disabilities), veteran status, liability for service in the Armed Forces of the United States, or any other characteristic protected by law. Know Your Rights (Click to view poster) If you are an individual with a disability or a disabled veteran, you may request a reasonable accommodation if you are unable or limited in your ability to access job openings or apply for a job on this site because of your disability. You can request reasonable accommodations by going to Reworldwaste.com and clicking on the ‘Contact Us' button. Under Inquires, select ‘Careers' in the Interest field, fill out all required fields including your message. In the message section, please note this is a ‘Job Application Accommodation Request'. Attention Staffing Agencies & Search Firms Reworld may sometimes selectively collaborate with staffing agencies and search firms (Agencies). Reworld will only consider candidates from Agencies with whom a signed agreement and a duly authorized work order (for a specific role) has been duly executed. Any unsolicited candidate submissions or candidate submissions from Agencies that do not meet these criteria, will be deemed invalid and ineligible for any fees.

The mission of Goodwin University is to educate a diverse student population in a dynamic environment that aligns education, commerce, and community. Our innovative programs of study prepare students for professional careers while promoting lifelong learning and civic responsibility. As a nurturing university community, we challenge students, faculty, staff, and administration to fully realize their highest academic, professional, and personal potential. Position Description Summary/Purpose: This position is responsible for performing electrical assessments, maintenance, and construction across University, Magnet School, commercial, and residential properties. Collaborates with internal departments and external subcontractors to ensure safe, efficient, and code-compliant electrical operations. Essential Job Functions/Primary Responsibilities: (The essential functions or duties listed below are intended only as illustrations of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar, related or a logical assignment to the position.) * Conducts diagnostics and repairs on industrial, commercial, and residential electrical systems * Installs and maintains fire alarms, motor controls, internet cabling, surveillance systems, and door access equipment * Performs low-voltage wiring tasks, including patching and routing * Provides on-demand electrical services and emergency response support * Reviews electrical blueprints and implements system upgrades or modifications * Procures materials and supplies to support ongoing projects and maintenance * Adheres to National Electrical Code standards and promotes a culture of safety through regular briefings and compliance checks Other Functions: * Assists with general maintenance tasks such as relocating furniture, painting, and equipment setup * Supports cross-functional teams and contributes to collaborative problem-solving * Engage in ongoing professional development to stay current with industry trends and technologies * Performs related duties as assigned to meet evolving operational needs Knowledge, Ability and Skill: * Demonstrated commitment to developing and fostering best practices and policies to promote diversity, equity, and inclusion, and build an environment in which all members of the University community are treated with respect and dignity. * Proficient in interpreting electrical schematics and blueprints * Strong troubleshooting skills with the ability to identify and resolve electrical issues efficiently * Familiarity with construction, plumbing, and HVAC systems * Effective communicator with experience working across departments

Company: Macri Associates Benefits Pay: 15.00-20.00 Hourly Rate Benefit Conditions: Waiting period may apply, only full-time employees eligible • Anthem Blue Cross Blue Shield: Health insurance, Dental insurance, Vision insurance • 401(k) • Life Insurance • Paid Vacation • 9 Paid Holidays • Potential for year-end bonus HVAC/Plumbing Apprentice - Full Time Paid About the Company: Macri Associates, Inc. was established in 1981 and has grown to become a leader in delivering innovative commercial mechanical services. Our success and growth are generated through quality long lasting relationships with both clients and employees. Macri has a reputation for attention to detail and sense of urgency in meeting its customer's needs. We take pride in our commitment to quality, value, professionalism, reliability, and client first service. All employees are essential in delivering on these philosophies and we depend on their skills and expertise to provide first class service. We strive to continually attract talented individuals and present them with opportunities for advancement and long-term career growth in a lighthearted but challenging office environment. Responsibilities: Become a valued and trusted member of the Macri team Learn from journeyperson proper procedures Ability to communicate effectively, follow-through, and develop relationships “Can-do” attitude, good work ethic, and self-motivated Ability to problem solve independently Trouble shooting equipment, fix and repair Working safely in all situations Be organized Communicate effectively with customers Controls work and wiring Enjoy your job Qualifications: • S-2, S-1, P-2, P-1 (Must be working/enrolled in education towards) • Driver's license and clean record • Covid-19 vaccination Expected Hiring Date 0 to 2 weeks Hires Needed 1-2 Schedule 8-hour shift, Monday to Friday Job Type: Full-time Pay: $15.00 - $25.00 per hour COVID-19 considerations: All employees required to be Vaccinated for Covid-19. Compensation: $15.00 - $25.00 per hour If you're looking for a career that offers flexibility, job stability, strong compensation, and more, then you've come to the right place! The industry needs you! Associated Builders and Contractors of Connecticut (CT ABC) is a construction industry trade association representing Merit Shop contractors in Connecticut. As a Chapter of ABC National, our membership of over 200 members is afforded an effective voice in the political system at the local, state, and federal levels. Across the country, ABC represents more than 21,000 members in over 65 Chapters. Based on the merit shop philosophy, we help our members develop people, win work and deliver work safely, ethically and profitably for the betterment of the communities in which they work. Merit Shop is free enterprise - the belief that all construction contracts should be awarded to the lowest responsible, qualified bidder based on merit, regardless of the company's labor affiliation. We are a voluntary membership organization working to support and advance the entire construction industry. Our membership is diverse; ranging from some of the largest and most established firms in Connecticut to younger firms who have just entered the commercial and public construction market. Membership also consists of both Supplier and Associate members who work side by side with our contractors to move the industry forward. Is a career in the construction industry for you? Working with an Associated Builders and Contractors of Connecticut member firm is a great career choice! Plenty of excellent positions are out there, ready for motivated people like you to fill them. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchise location, and not to Associated Builders and Contractors of Connecticut.

The Apprentice will work alongside licensed technicians to learn the ins and outs of working on HVAC equipment and expand the skill set. Job Duties and Responsibilities include the following: * Assist licensed technicians with installing, maintaining, heating, ventilation, air conditioning and boiler systems. * Assist with service and installations including testing equipment, mounting equipment, performing diagnosis, adjusting refrigerant and wiring controls. * Assist techs, however possible, taking the time to get familiar with equipment and proper procedures. * Maintain a clean work environment, gathering all tools and materials at the end of the day. Required Education & Experience: * Diploma from a technical High School. * Valid Driver's License. * Minimum of an OSHA 10 certification. * Excellent verbal and written communication skills with ability to effectively communicate with varied audiences, e.g., project managers. Physical Demands & Work Environment * Requires physical work, lifting, pushing and/or pulling objects up to 50 pounds. * Requires the ability to stand, sit, squat, walk and climb during shift. * Exposure to hot & cold temperatures, dirt, dust, fumes, smoke, unpleasant odors, and/or loud noises. Other Duties: This job description is not designed to cover or contain a comprehensive list of activities, duties or responsibilities that are required of the employee. They may change or new ones may be assigned at any time.

Power Distribution Electrician, 1st Shift University of Connecticut, Facilities Operations, Storrs Campus Salary Range: $68,622.00-$87,595.00 Yearly. Link to Power Distribution Electrician Job Specification: ************************************************************************************ INTRODUCTION UConn's Facilities Operations Department has two job openings for Power Distribution Electrician positions at the Storrs Campus. The Power Distribution Electrician positions are permanent, full-time, 37.5 hours/week positions. The work schedule will be determined by seniority and discussed during the interview. These positions are only open to current UConn NP-2 QCW Electricians that have completed the training requirements of the Power Distribution Electrician job classification. Current QCW Electrical employees who meet all of the minimum qualifications and special requirements of the job specification will be provided with an opportunity for an interview for the positions. In order to be eligible for the positions, current UConn NP-2 QCW Electrical employees must have completed two years of training with an energized voltage over 600 volts, successful completion of Eversource ESOP 100 high voltage training and hold an active E-1 or E-2 license. The hourly rate of pay will be determined based on the employee's current Step of the Pay Plan. These positions are categorized as Emergency Support Services/Essential Staff. Must be willing and able to work during emergency closures/delayed openings due to inclement weather or for significant events that affect campus operations. Applicants must also be willing to respond to emergencies on overtime (nights, weekends and holidays) and must make the commitment to work scheduled shutdowns during regular work hours and on overtime. Please note that Facilities Operations NP-2 employees may also be required to perform job duties as assigned at any of the Regional Campuses. SELECTION PLAN These positions are categorized as "Open to Agency Only". Current, qualified UConn NP-2 QCW Electricians will be considered for the positions, as well as any other current, qualified NP-2 employees. Applicants must possess and retain a current motor vehicle operator license throughout employment with the University. A current Connecticut E-1 or E-2 license is required, along with Eversource ESOP 100 high voltage certification and both must be retained throughout employment with the University. To Apply: * In order to be considered for this job search, you must meet the minimum qualifications as listed on the job opening and must specify your qualifications on your application. PageUp applications will be evaluated to ensure that the Knowledge, Skill and Ability, Special Requirements and Minimum Qualifications sections of the position have been met. Please also be sure to demonstrate how you meet any of the Preferred Qualifications that you may have. * Ensure that your PageUp Application is complete and detailed before submitting it. You will not be able to make revisions once your application is submitted into the PageUp system. * If applicable, applicants are strongly encouraged to indicate on their application (under the Job-Related Academic, Technical or Vocational Training section of the application) the name(s) of any Educational Institution(s) attended in trade related subjects, and to indicate the title(s) of the in person and/or online course(s) studied, Address, City, State where the Educational Institution(s) are located, the years attended and the number of Credits earned or Diploma Earned. * If applicable, applicants are strongly encouraged to indicate on their application (under the Licenses and Professional Certification section of the application) any current trade license(s) and Eversource certification(s) held, along with the issuing agency, license or certification number, date issued and expiration date. * Although it is not required, applicants are strongly encouraged to submit a cover letter, resume and a list of three professional, work related references along with their contact information. Important Next Steps Information: * At any point during the recruitment process, applicants may be contacted via email and provided an opportunity to submit additional documentation which support their qualification(s) for this position. These documents may include: a cover letter, resume, performance reviews, attendance records, supervisory references, licensure, etc., at the discretion of the hiring department. Applicants must meet the minimum qualifications as indicated to apply for this position. * If selected for an interview, you may be asked to supply the names, titles and phone numbers of three, professional, work related references. In addition, applicants may be asked to provide copies of their last two (2) performance appraisals and CORE attendance records. * Please regularly check your email provided on your application for notifications. Please check your SPAM and/or Junk folders on a daily basis in the event an email provider places auto-notification emails in a user's spam. EXAMPLES OF DUTIES * Performs highly skilled and specialized installation, maintenance and repair work to equipment and machinery used in a power distribution system; * Installs, maintains and performs electrical repair work to both overhead and underground power distribution systems such as utility metering systems, circuit breakers, voltage regulators, power transformers, distribution transformers, switchboard wiring and controls, control circuits, insulators, switchers on substation structures and systems, cutouts, re-closers and wiring; * Utilizes specialized electrical and computerized equipment and instruments to conduct repairs and analyze power plant electrical generation performance such as a thermal infrared imaging, meters, voltmeters, ammeters and monitors software; * Interprets electrical drawings, diagrams and schematics to initiate repairs and verify high voltage switching procedures; * Performs necessary safety testing of electrical equipment, performs Lock Out/Tag Out safety procedures; * Performs pole work and confined space work; * Maintains sub-station and transformers and connections through oil tests and visual inspections; * Maintains required records; * May diagnose power plant electrical failures and recommend adjustments to Power Plant Operators; * Performs related duties as required. KNOWLEDGE, SKILL AND ABILITY * Considerable knowledge of and ability to apply standard tools, materials, methods and practices of electrical trade; * Knowledge of * and ability to utilize specialized equipment such as thermal infrared imagery, metering software; * principles and safety practices used in power distribution systems; * Skills * interpersonal skills; * oral and written communication skills; * computer skills; * Ability to * prepare work order estimates; * organize and maintain accurate records including computerized databases. MINIMUM QUALIFICATIONS - GENERAL EXPERIENCE Four (4) years of experience performing highly skilled work in the electrical trade area. MINIMUM QUALIFICATIONS - SPECIAL EXPERIENCE Two (2) years of the General Experience must have included some experience in the repair and maintenance of electrical equipment and machinery with an energized voltage over 600 volts. NOTE: For state employees this experience is interpreted at the level of a Qualified Craft Worker (Electrical). MINIMUM QUALIFICATIONS - SUBSTITUTIONS ALLOWED Graduation from a vocational or technical school with a diploma designating completion of subject requirements in a maintenance trade area may be substituted for two (2) years of the General Experience. SPECIAL REQUIREMENTS * Incumbents in this class must have up to date Eversource ESOP 100 High Voltage training and certification. * Incumbents in this class may be required by the appointing authority to possess and retain licenses, permits and/or certifications. * Incumbents in this class may be required to possess and retain appropriate specific education and/or experience to meet various certification requirements. * Applicant must possess and retain a current motor vehicle operator license throughout employment with the University. * Applicant must possess and retain a current State of Connecticut E-1 or E-2 License throughout employment with the University. * Applicant must have the ability to read and interpret mechanical and electrical blueprints for building and utility systems. PREFERRED QUALIFICATIONS * Knowledge of and experience working with a Computerized Maintenance Management System (CMMS), preferably AiM. * Experience using an IPad. * Experience working in a union environment at a college, university or similar entity. * Commercial Driver's License, CDL - Class A or B. * Experience maintaining high voltage substations. * Experience performing mark outs with CBYD and locating high voltage underground cables. * Considerable experience and knowledge of Eversource procedures in performing high voltage work. * Experience working with 4160 high voltage power systems and high voltage generation plants. * Experience working with high voltage cable vaults. * Bucket truck operator experience performing maintenance on overhead high voltage equipment. PHYSICAL REQUIREMENTS * Incumbents in this class must have adequate physical strength, stamina, physical agility and visual and auditory acuity, and must maintain such physical fitness as to be able to perform the duties. * A physical examination may be required. * Incumbents in this class will be required to drive and operate motor vehicles, including, but not limited to vans, bucket trucks, box trucks, and pick-up trucks ranging in size from compact, midsize, full-size, and heavy-duty, some of which are equipped with lift gates. * Incumbents must have adequate physical strength and agility to walk up and down stairs frequently and climb ladders independently. Must be able to lift, carry and push material weighing up to 75 lbs. Must have the ability to utilize ladders, scaffolding, high-lifts and enter confined spaces. Must be able to inspect, troubleshoot and repair equipment that is part of a wide range of electrical and mechanical systems. Incumbents must possess the ability to utilize tools, perform the required duties set forth above and will be required to wear personal protective equipment (PPE) when necessary. WORKING CONDITIONS * Incumbents in this class may be required to lift moderate to heavy weights, use protective equipment such as high voltage apparatus and may be exposed to risk of injury from equipment and extreme weather and/or environmental conditions. * The appointing authority may require completion of an asbestos removal program consistent with EPA guidelines for operations and maintenance during employment in this class. Incumbents may be required to use protective equipment such as respirators and safety goggles. APPLICATION INSTRUCTIONS Please apply online at ************************** click on "Faculty & Staff Openings" and search #499010. Although it is not required, applicants are strongly encouraged to submit a resume, cover letter, and a list of three professional, work related references along with their contact information. This job posting is anticipated to be removed at 11:55 p.m. Eastern time on January 28, 2026. All employees are subject to adherence to the State Code of Ethics which may be found at ***************************************** Information concerning the University's policies regarding the Cleary Act Statement, Non-Discrimination Policy, Accommodations for Applicants with Disabilities and Recruiting Veterans can be found on UConn's Job page at: ************************** The University of Connecticut is committed to building and supporting a multicultural and diverse community of students, faculty and staff. The diversity of students, faculty and staff continues to increase, as does the number of honors students, valedictorians and salutatorians who consistently make UConn their top choice. More than 100 research centers and institutes serve the University's teaching, research, diversity, and outreach missions, leading to UConn's ranking as one of the nation's top research universities. UConn's faculty and staff are the critical link to fostering and expanding our vibrant, multicultural and diverse University community. As an Affirmative Action/Equal Employment Opportunity employer, UConn encourages applications from women, veterans, people with disabilities and members of traditionally underrepresented populations.

Job DescriptionBenefits: IRA matching Bonus based on performance Company car Free uniforms Opportunity for advancement Training & development Benefits/Perks Retirement - SIMPLE IRA Competitive Compensation Career Advancement Opportunities Two year registered apprenticeship with RI DLT Job Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will assist in the installation, service, or repair of heating and air conditioning systems in residences or commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: Assist in the repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants Establish customer rapport to ensure the highest levels of satisfaction Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution Test electrical circuits or components for continuity, using electrical test equipment Repair or replace defective equipment, components, or wiring Cleaning and maintaining a worksite and assist Master licensed technician with job. On the job learning and continuing education outside of work Qualifications: Past experience as an HVAC service technician or comparable education Valid Drivers License EPA Certification OSHA 10 or higher Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems Ability to climb ladders, crawl, and lift 40 pounds