Field service technician jobs in Andrews, TX

Job DescriptionCompany Profile BlueFin, a GATE Energy Company, is a leading independent service company with a suite of project execution niches and specialty equipment, covering a full range of pipeline and process, mechanical, intelligent completions, and fluid flushing and filtration services. Our clients range from Operators to General Contractors in the upstream and midstream market sectors of the oil and gas industry. This position is based in Odessa, Texas. Job Summary Serve as Lead Service Technician working in the Completion Services Department for land and offshore. Responsible for execution of tasks as assigned by the Lead Service Technician, Service Supervisor, Project Manager, or other Management. Is operationally qualified, verified, and authorized as required for specific tasks. May lead limited scope projects in the absence of a Lead Service Technician or Superior during a shift with prior approval from and/or under the direction of the Lead Service Technician or Superior. Specific job tasks would include but not be limited to Installation and/or retrieval of Permanent Gauge Systems, Control Line, TEC & Flatpack, Fiber Optics, Chemical Injection Systems, Gas Lift Mandrels & Valves. The Lead Service Technician will conduct all activities in an accountable, respectful, and professional manner at all times and fully support the completion of work in accordance with BlueFin quality and safety standards. Essential Duties and Responsibilities Travel through United States and Gulf of Mexico; staying overnight for extended periods. Proven ability to lead and supervise a field work crew in the task at hand. Communicate effectively with co-workers both office and field related. Good written and verbal communication skills. Ability to train and develop Service Technicians. Direct and perform field services as directed and in accordance with work plan, procedures and/or SOP, and ability to distinguish the work at hand from the work plan/procedure and how to proceed while making field decisions to drive the project. Knowledge and proven ability to operate equipment utilized in Completion Services and to train employees on such equipment. Service, maintain, repair, and test equipment/ tools for pre/post jobs or as instructed in shop. Write or participate in writing JSA's for job task assigned. Load/ unload equipment when required. Learn all field services work and equipment in order to gain skills/knowledge. Increase knowledge and participate in training on other product lines and services. Participation and Compliance with BlueFin HSE and Quality Management System. Comply with all company policies (Safety, quality, general, SOP's, etc). Available 24-hour call (except for scheduled vacation). Have reliable means of transportation to and from BlueFin office. Experience and Education High School Diploma or GED. Preferred 5-10 years of Completions experience. Must hold or ability to obtain Certificates for Marine Trash & Debris, Huet, Water survival, Safe Land/Safe Gulf, Fall Protection, Incipient Fire and Rigging at a minimum. Physical Requirements Must pass required Fit for Duty Exam Ability to drive for extended periods of time. Able to perform demanding physical labor in harsh environments on land and offshore. Bluefin is an Equal Opportunity Employer.

USA Compression Partners, LP, (NYSE: USAC) provides mission critical natural gas compression services to large upstream and midstream energy companies. We are an operations-centric, technology driven employer with 800+ employees in 18 states across the US. We owe our success to the quality of our employees, our strong commitment to safety, and our superior service to our customers. Summary: A Lead Service Technician (LST) is responsible for maintenance and service of USA Compression equipment reporting to the Area Service Manager. With minimal supervision and significant autonomy, the typical areas of responsibility include developing Field Service Technicians and being a subject matter expert for them, safely performing scheduled maintenance, maintaining and building customer relationships, and providing first line support for equipment troubleshooting. The LST is involved in start-ups, major maintenance, significant failures and high-end trouble shooting. USA Compression employees are proudly responsible for maintaining a safe and professional work environment and positive workplace aligned with our Pillars culture. Essential Duties and Responsibilities: * Involved in start-ups, major maintenance, significant failures, overhauls, and high-end trouble shooting and advanced diagnostic repair skills on wide variety of equipment. * Lead by example and be a subject matter expert and role model to Field Service Technicians (FST) and assist in their technical skill and professional development. * Ensure USAC maintains run time of natural gas compression units per contractual agreements. * Respond quickly and accurately to customer inquiries and communicate with ASM. * Partner closely with the ASM to ensure a smooth and efficient Area operation. * Maintain and safely operate company vehicle/commercial truck according to company guidelines. * Communicate with sales team to identify new sales, customer or equipment opportunities. * Utilize the WMS and partner with a parts department to ensure sufficient parts inventory for each unit in Area. * Ensure Area units are clean following good housekeeping rules and maintain safe working conditions. * Assist in building the USAC culture through positively representing our image and helping recruit new FSTs. * Assist in supervisory duties in the absence of the ASM or as assigned by the ASM. * Understand and follow company handbook, and all company or customer safety and environmental policies. * Any other duties or responsibilities as assigned by supervisor. Skills/Capabilities and Education: * Technical or trade school certification, college degree or additional work experience in related field. * At least 7 years of experience in gas compression with preference to CAT, Ariel and/or Cummins. * CAT Gas Engine II, Troubleshooting, Electronics certifications; CAT 3500, 3600, ADEM 3 and ADEM 4, Ariel Mechanics 1 and 2, Murphy panel a plus. * Valid driver's license with a Motor Vehicle Record history acceptable to USA Compression. * Strong interpersonal skills with strong written and verbal skills. * Excellent customer service skills with customer field personnel, onsite vendors, and other employees. * Ability to understand written and verbal communication from the company and supervisor including training, procedures, instructions, etc. * Ability to be self-managed and work independently with little or no supervision. Prior management experience is a plus. * High degree of mechanical ability including electrical and natural gas compression. * Ability to teach and communicate both technical and soft skills to FSTs aiding in their training and development. * Experience reading and understanding technical manuals. * Thorough knowledge of relevant HSE procedures and regulations. * Experience in configuring natural gas compression equipment. * Solid computer and communication technology skills. * Ability and interest in further developing people and business management skills. * Ability and flexibility to work extended hours including periodic on-call weekends. * Applicant must have the ability to legally work in the U.S. Working Conditions: * Typically, an LST's work day consists of driving a USA compression service vehicle to customer locations to perform repair and maintenance activities. * Travel is required up to 75% of the time worked. * Periodic lifting requirements in excess of 50 lbs. * Ability to stand and walk on uneven and varied terrain, climb ladders and stairs; and stoop, squat, kneel, crouch and crawl depending on the task requirements. * Exposure to extremes in temperature and weather conditions depending upon assigned location. * Some exposure to high noise levels in excess of 85dBA that require ear protection, as well as exposure to potentially hazardous chemicals and materials. * Working conditions in natural gas compression vary from one job site to another. Some job sites are indoors in compressor stations while other sites are outside, exposed to a variety of weather conditions. * There is a strong emphasis on safety while working with heavy equipment and machinery.

Join Southern Star: Elevate Your Career and Earnings! Schedule: Two days off per week, in slower seasons a four-on, three-off schedule is available. Bonus Opportunity: Earn a Trained and Active Bonus of $500.00, paid in two installments: $250.00 at 60 days of employment and $250.00 at 6 months. About Us: At Southern Star, we are the driving force behind award-winning DISH TV service and innovative home entertainment products. As a Southern Star technician, you will be more than a service provider; you will be a technology ambassador, enhancing the way customers interact with technology. Compensation: Base Pay and Commissions: Start with a competitive hourly rate and earn commissions. Performance Incentives: Boost your earnings with performance bonuses. First-Year Potential: Earn between $50,000 - $60,000 or more in your first year. Experienced Technicians: Earn between $60,000 - $85,000+ annually. Training and Growth: Paid Training: Comprehensive training to ensure your success. Support: Continuous support to help you achieve your career goals. Benefits: Insurance: Comprehensive insurance benefits. Retirement: 401K plans. Paid Time Off: Generous paid time off. Life Insurance: Company paid $25,000 life insurance policy. Company Vehicle: Provided upon completion of training. Device Plan: Monthly stipend for using your own smartphone. Employee Discounts: Exclusive discounts through LifeMart, including home mortgage lender savings. Role Requirements: Technical Skills: Strong technical knowledge and the ability to scale ladders up to 38 ft and navigate crawl spaces. Travel: Willingness to travel up to 20% of the time (lodging and per diem covered by SSI). Communication: Excellent communication and customer service skills. Sales: Ability to upsell while installing DISH systems. Time Management: Effective time management skills. Must have a clear Background, Drug Screen and Motor Vehicle Record Join Us: Become a part of Southern Star and transform the way customers experience home entertainment. Apply today and unlock your potential! #INSSMST #ZR

Based out of Granbury, Texas, BC Tech Pro partners with techs all over the country to complete on-site hardware warranty services in their territories. If you love working on computers and want to get out from behind a desk, come work with us! Job Description This is a Computer Field Technician Position doing hardware repairs and installations on laptop and desktop units. To be successful in this position, you must have prior experience with laptop and desktop hardware. Job Details: This is a 1099/per call position Pay is based solely on the number of calls completed. Calls start at $35 and go up based on distance traveled Pay period: Every Friday after the first week worked Tickets are run Monday-Friday during the day shift. Candidates must be regularly available a minimum of 3 weekdays to be considered. Call volume is variable but is usually 2-5 calls per day You will complete certifications from Dell and Lenovo as part of your onboarding. Certifications are online and free to you. You must have a reliable form of transportation and a valid driver's license to run these calls. You will be visiting multiple work sites throughout your day. You must have access to a computer and the Internet to log onto your portal each day. You must be available to log into your tech portal each morning you are working by 9 am to code your calls and map out your route for the day. The manufacturer has completed troubleshooting and shipped a part prior to your ticket being issued to you. You will confirm service times with the customer in your tech portal. Services will be completed at the customer site (residential and commercial) You will pick up parts daily from the assigned Fed Ex or UPS store for your territory before going onsite. Once all calls are completed for the day drop off the old parts with the pre-paid label that is provided. Qualifications Must have prior hands on experience with replacing components on laptops and desktops Must have a valid driver's license and reliable transportation Must be comfortable with daily local travel Additional Information All your information will be kept confidential according to EEO guidelines.

Founded in 1988, Mersino is a single source for pumping services, contract dewatering, one-pass trenching, power generation and drilling. Our people are the most valuable asset, and we strive to maintain a culture that inspires dedication to customer service. Whether a planned project or an emergency response, Mersino meets challenges with expertise, equipment, and service. We move water. Location: Midland, TX Job Summary: Primary responsibility of the Field Service Technician/ Diesel Mechanic is to maintain, service and repair the company's mechanical equipment including pumps, generators and related equipment. The Field Service Technician will serve as a working team member and individual contributor to the overall team's success. What we offer our Field Service Technicians: Weekly pay Boot reimbursement (up to $150) and apparel credit (up to $100) Full benefits including medical, dental, vision, 401k with company match Tuition reimbursement (up to $5,250) Advancement opportunities and continuous skill building Annual merit increases Typical Duties and Responsibilities: Service, repair and maintain the company's diesel pumps, fleet and mechanical equipment Perform repairs and maintenance on company equipment at job sites as required Perform quality checks on repaired equipment Maintain complete and accurate service records on all equipment serviced Tune up wellpoint systems as required Complete required documentation of all repairs and service as per company procedure Maintain workspaces and promote shop safety by cleaning work areas and removing hazardous materials Adhere to applicable company and regulatory agency environmental, health and safety standards Qualifications: High school diploma or equivalent experience required Bilingual - Fluent in both English and Spanish Experience diagnosing, servicing, and repairing large equipment preferred Appropriate repair certifications desired Ability to obtain a valid DOT Medical Card This job has specific DOT requirements. Please see the link: ********************************************************************************** Specific Expectations: Planning and organizational skills in handling multiple projects Ability to work long hours in extreme weather conditions Excellent internal and external customer service skills Travel and answer emergency calls during non-business hours Work effectively with others Multi-task in a changing environment Self-motivated, ability to perform tasks with little or no direction Ability to work a flexible schedule to meet job requirements Strong time management and organizational skills Required intermittent periods during which continuous physical exertion is required, such as walking, standing, stooping, climbing, lifting material or equipment, some of which may be heavy or awkward Disclaimer : The above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Mersino is an Equal Opportunity Employer/Veterans/Disabled

Who We Are Kirby-Smith Machinery, Inc. is a leading distributor of heavy equipment and cranes in the central United States. We are at the forefront of today's construction industry growth and have several exciting job opportunities for talented, energized professionals across the region who want to join our #WeAre1KirbySmith family! Crane Field Service Technician/Mechanic Benefits Above-Average Industry Pay Comprehensive Benefits Package (including Medical/Dental/Vision) 401K Plan with Company Match Generous PTO Package/Paid Holidays Short/Long Term Disability Growth Opportunities Paid Training Family-owned and Operated Health and Wellness Crane Field Service Technician/Mechanic-Specific Benefits Relocation assistance available for qualified candidates Uniforms and Safety Steel/Composite Toed Boots provided Continued Education, Manufacturer Hands-On and Web-Based Training Paid Accident Insurance Crane Field Service Technician/Mechanic Position Purpose The Crane Field Service Technician operates a mobile service vehicle and travels to customer locations to perform in-field repairs on various brands of heavy equipment. This will include diagnosing issues, ordering parts, writing technical reports, maintaining the care of company assets, and communicating professionally with others. They will perform quality work as efficiently and profitably as possible. Crane Field Service Technician/Mechanic Essential Functions Communicates and supports the Kirby Smith vision and core values of One Mission, One Team, One Plan, One Goal Performs field repairs and maintenance with little or no direct supervision Diagnoses and evaluates problems with equipment and makes repairs using established guidelines, following established flat rates Plans methods and sequence of performing assigned repairs Models safe work habits and abides by all safety policies and procedures always Keeps rework within established guidelines Makes overnight stays on or near job sites when required Completes required paperwork efficiently and promptly Attends factory and other training as specified by the supervisor Maintains the service truck in good working condition and cleanliness Completes daily, monthly, and annual safety and vehicle inspections Consistently exhibits professional demeanor with customers, managers, and colleagues Promotes goodwill with customers and exhibits excellent customer relations behaviors Performs other job-related duties as assigned Ensures consistent and reliable on-site attendance Crane Field Service Technician/Mechanic Minimum Qualifications High School Diploma or Equivalent Ability to speak, read, and write in English Two (2) years of continuous experience in diagnosing and repairing construction equipment Ability to read complex hydraulic and electrical schematics Furnish and maintain a set of hand tools and any special tools required by the company Ability to work overtime, stay overnight, and work on the weekend when needed Possess and maintain a valid driver's license; CDL if required Crane Field Service Technician/Mechanic Physical Requirements Pushes/Pulls/Lifts/Carries up to 100 pounds without assistance Physical ability to squat, twist, turn, bend, stoop, climb, and reach overhead Must be able to work in extreme heat or cold and wet, damp, dusty, or windy conditions and tolerate exposure to typical noises, hazardous materials, and fumes/odors Physical ability to perform maintenance on equipment for extended hours, with continual mounting and dismounting throughout the workday Ability to adhere to personal protective equipment (PPE) policy and maintain individual PPE in a functional condition This is considered a Safety-Sensitive position. We are an equal opportunity employer and prohibit discrimination/harassment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

Company Profile BlueFin, a GATE Energy Company, is a leading independent service company with a suite of project execution niches and specialty equipment, covering a full range of pipeline and process, mechanical, intelligent completions, and fluid flushing and filtration services. Our clients range from Operators to General Contractors in the upstream and midstream market sectors of the oil and gas industry. This position is based in Odessa, Texas. Job Summary Serve as Lead Service Technician working in the Completion Services Department for land and offshore. Responsible for execution of tasks as assigned by the Lead Service Technician, Service Supervisor, Project Manager, or other Management. Is operationally qualified, verified, and authorized as required for specific tasks. May lead limited scope projects in the absence of a Lead Service Technician or Superior during a shift with prior approval from and/or under the direction of the Lead Service Technician or Superior. Specific job tasks would include but not be limited to Installation and/or retrieval of Permanent Gauge Systems, Control Line, TEC & Flatpack, Fiber Optics, Chemical Injection Systems, Gas Lift Mandrels & Valves. The Lead Service Technician will conduct all activities in an accountable, respectful, and professional manner at all times and fully support the completion of work in accordance with BlueFin quality and safety standards. Essential Duties and Responsibilities Travel through United States and Gulf of Mexico; staying overnight for extended periods. Proven ability to lead and supervise a field work crew in the task at hand. Communicate effectively with co-workers both office and field related. Good written and verbal communication skills. Ability to train and develop Service Technicians. Direct and perform field services as directed and in accordance with work plan, procedures and/or SOP, and ability to distinguish the work at hand from the work plan/procedure and how to proceed while making field decisions to drive the project. Knowledge and proven ability to operate equipment utilized in Completion Services and to train employees on such equipment. Service, maintain, repair, and test equipment/ tools for pre/post jobs or as instructed in shop. Write or participate in writing JSA's for job task assigned. Load/ unload equipment when required. Learn all field services work and equipment in order to gain skills/knowledge. Increase knowledge and participate in training on other product lines and services. Participation and Compliance with BlueFin HSE and Quality Management System. Comply with all company policies (Safety, quality, general, SOP's, etc). Available 24-hour call (except for scheduled vacation). Have reliable means of transportation to and from BlueFin office. Experience and Education High School Diploma or GED. Preferred 5-10 years of Completions experience. Must hold or ability to obtain Certificates for Marine Trash & Debris, Huet, Water survival, Safe Land/Safe Gulf, Fall Protection, Incipient Fire and Rigging at a minimum. Physical Requirements Must pass required Fit for Duty Exam Ability to drive for extended periods of time. Able to perform demanding physical labor in harsh environments on land and offshore. Bluefin is an Equal Opportunity Employer.

Job DescriptionSalary: Reinvigorate your career with an organization that values teamwork, expertise, and integrity. Were looking for an experienced Lead Valve Services Technician to join our growing team and take a leadership role in managing valve service operations, customer relationships, and business growth opportunities. This position is ideal for someone with hands-on relief valve experience, strong organizational and communication skills, and a passion for delivering top-quality service in the oil and gas industry. Who we are: At the Crimson Group, we provide our clients with high-value automation, instrumentation, electrical design, and process operation solutions. With the capabilities of a large enterprise, and the agility and responsiveness of a small company, we are a customer-focused provider of automation and integrated solutions. Crimson Group provides total integration of design, project management, panel manufacturing, installation/commissioning, maintenance, and repair for North America and select international markets. What we Offer: Competitive hourly compensation. Comprehensive benefit package and 401k plan. A company laptop and cell phone reimbursement. An environment of continuous learning with the opportunity to enhance your skills & experience and grow within the organization. The opportunity to participate in charitable events through our charity, RedTail Community Foundation. What you will be Doing: Oversee and execute valve testing, inspection, repair, and maintenance activities. Assist with scheduling, resource allocation, and service documentation for multiple client projects. Develop and maintain strong client relationships to ensure satisfaction and repeat business. Lead, mentor, and support valve technicians in the field and shop, ensuring safety and quality standards are upheld. Perform or supervise testing and calibration of relief valves to meet company and safety standards. Assist in troubleshooting and problem-solving of complex valve issues. Track project progress, costs, and customer requirements to ensure timely delivery. Collaborate with operations, sales, and management to identify growth opportunities in valve services. Support business development by identifying client needs and assisting with proposal or quote preparation. Maintain detailed records of work performed, certifications, and compliance documentation. Your Skills and Qualifications: 35+ years of hands-on experience with relief valves, safety valves, and related pressure control equipment. Previous experience in a lead technician, coordinator, or supervisory role. Proven customer service and account management skills with the ability to build trust and long-term relationships. Excellent leadership, communication, and organizational skills. Proficiency with scheduling tools, maintenance tracking systems, and Microsoft Office Suite. Ability to manage competing priorities and meet deadlines in a fast-paced service environment. A valid drivers license and willingness to travel occasionally to client sites. Technical training or certification in mechanical, instrumentation, or valve technology. Background in oil & gas, industrial maintenance, or manufacturing. Safety-conscious, reliable, and proactive approach to problem-solving. A results-driven mindset with a focus on quality, customer satisfaction, and continuous improvement. **As part of our commitment to maintaining a safe and professional work environment, the Crimson Group of Companies conducts comprehensive background checks and drug and alcohol testing on all prospective employees as part of the final offer process. These checks are intended to verify the accuracy of information provided by candidates and assess any potential risks to the company or its employees. All offers of employment are contingent upon the successful completion of these background checks.** Please note: We do not accept phone calls regarding job opportunities. To ensure fairness and consistency in our hiring process, all candidates must follow the application instructions outlined in the posting. Thank you for your understanding.

Job Details Odessa, TXDescription The NDE Technician will be performing calibrations, Nondestructive Tests, and evaluations for acceptance or rejection determinations according to written instructions and record results. Level II Technicians are qualified to set up and calibrate equipment and to interpret and evaluate results with respect to applicable codes, standards, and specifications. Level II Technicians are thoroughly familiar with the scope and limitations of the method of NDT being used and should exercise assigned responsibility for on-the-job training and guidance of Assistants and Level I Technicians. Level II Technicians organize and report results of NDT. Responsibilities Include but are not limited to: Set up and calibrate nondestructive testing equipment . Conduct tests to ensure quality or detect discontinuities (defects) using NDT methods of inspection . Establish techniques for proper examination of objects under inspection, ensuring strict adherence to safety regulations . Apply testing criteria in accordance with applicable specifications or standards and evaluate results . Interpret radiographs, cathode ray tube (CRT) or digital readouts, conductivity meters and visual indicators . Organize and report test results . Perform specialized inspections . May instruct and supervise others . Perform other job-related tasks as assigned by management Education and Experience: NDT Level II RT with OJT and state card . NDT Level II MT, PT, UTT Preferred . Technical background in NDT methods and procedures . Demonstrated ability to effectively perform assigned NDT tasks and interpret results of inspections . Knowledge of NDT equipment . High School Diploma or equivalent Requirements . Complete and pass a DISA Background check . Complete and pass all required Drug Screens . Complete and pass site specific safety council . MUST TEST OUT IN ALL REQUIRED METHODS WITH XCEL Qualifications Desired Competencies: Strong work ethic. Dependable, Exceptional safety and quality awareness. Mechanical aptitude. Adaptable to changing schedules. Exceptional attention to detail. Teamwork. Ability to follow directions and procedures XCEL NDT, LLC. is an equal opportunity employer where employment is based upon personal capabilities and qualifications without discrimination because of race, color, religion, gender, age, national origin, disability, veteran status or any other protected characteristic as established by law Work Conditions/Physical Requirements: Move, carry and lift objects in excess of 50 pounds Climb and perform work from ladders, stairs and scaffolding in excess of 100 feet, continuously throughout shift Be able to climb ladders and platforms up to 250 feet with a harness and lanyard Be able to step up into vehicles or onto equipment Work extended hours and stand for extended periods of time Work in indoor and outdoor environments in conditions of extreme heat and cold Work in and near industrial hazards

Job Details West Texas Area - Midland, TX Full Time Associates or Equivalent Experience Road Warrior Any Pipeline OperationsDescription ORGANIZATIONAL STRUCTURE reports to the Field Network Manager. None. This position is being sourced for Midstream Integrity Services (MIS). POSITION SUMMARY The Field Network Technician is responsible for network development and maintenance in the field. The Field Network Technician maintains the company's network systems, troubleshoots network systems when necessary and makes improvements to the network. Works with the organizations team and its clients to install, configure, maintain, and fix all LAN/WAN and other equipment issues, ensuring efficient network functionality. RESPONSIBILITIES Work closely with the operations, automation, security, and information technology groups to understand the communication needs of the field assets. Provide construction, operation & maintenance of communication lines, wireless data, fiber optic data lines, wireless tower lines and wireless services. Responsible for installation and maintenance of network equipment and configuration of various devices. Working knowledge of Open-Source Interconnection (OSI) model to Layer 3 (Networking). Interpret network drawings and schematics and implements design parameters as specified. Install and troubleshoot fiber, voice, and data circuits utilizing appropriate test equipment. Demonstrate exceptional communications, customer service skills, technical, and problem-solving skills, and the ability to effectively operate tools necessary to perform job duties efficiently and safely. Work independently in remote locations with weather extremes found in West Texas locations. Install, maintain, and troubleshoot emergency power systems to include hut level battery plants, solar-battery setups, and back-up generators. Terminate, splice, and test fiber optic cables utilizing appropriate equipment. Perform site surveys for upgrades and new installations of fiber optic / wireless services. Install, troubleshoot, and maintain licensed and unlicensed/licensed IP and RF based radio Systems. Monitor network for equipment alarms and adverse trends to proactively prevent network outages. Perform all duties in accordance with all applicable OSHA and FCC safety guidelines. Identify potential safety hazards and report to supervisor as appropriate. Use extensive knowledge of DC current electronics with a basic knowledge of AC current electrical systems. Knowledge of ANSI/TIA-568 cabling standards. All other duties as assigned. EDUCATION AND EXPERIENCE 3-5 years of related industry experience. Associate's or Technical degree in Electronics, or Computer Science. Experience with OTDRs and OPMs in finding fiber optic faults. Experience using Microsoft Office application Suite. Preferred certifications in fiber and applicable industry hardware and software applications. REQUIRED SKILLS / ABILITIES Ability to safely use ladders, aerial lifts, and other associated telecommunications construction equipment. Good verbal and written communication skills. Working knowledge of Windows based personal computer equipment, including Microsoft Office Suite. Ability to work independently and in a team environment. Must be detail oriented. Individual must demonstrate a positive attitude in a rapidly changing industry. Ability to work a schedule based on regular weekly hours with added callout events as well. PHYSICAL AND TRAVEL REQUIREMENTS Must be able to stand, walk, sit, bend, stoop, quat, climb stairs and ladders, push, pull, reach, grasp and grip, use finger dexterity, write, drive, or operate equipment daily. Must be able to lift/carry up to 60 pounds. Must be able to work outdoors and be exposed to extreme temperatures. Must be able to travel to various job sites. EXCELLENT COMPENSATION EPIC offers competitive market-based compensation. Compensation for this role will also depend on your levels of expertise and experience. In addition to a competitive salary, we offer a strong comprehensive benefits package that includes an annual bonus, platinum-level medical coverage, dental and vision insurance; robust allotment of paid time off; a 401(k) with a generous company match; HSA incentive; Flexible Spending Accounts and more. EPIC is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status.

SUMMARY OF RESPONSIBILITIES: Conduct commissioning, testing, maintenance and repair of complex protective relaying schemes in generation, transmission, and distribution substation environments. Be able to operate various types of electrical test equipment including but not limited to Omicron, Doble, Vanguard, etc. This position requires an intermediate to strong level of understanding of interfacing software such as Test Universe, Protection Suite, AcSELerator, Wireshark, etc. Facilitate the retrofit, upgrade, and replacement projects for electrical controls, SCADA, DCS, and Power System Protection Equipment. ESSENTIAL JOB FUNCTIONS: Test over current/voltage, Directional, Distance, Impedance, Sync Check, Loss of field, reverse power, Multifunction relays etc. Perform function testing of substation control circuits on relay panels, transformers & circuit breaker controls. Perform isolation, setpoint testing, advanced logic testing, and scheme testing (reclosing, breaker failure, etc.) Perform end-to-end relay testing using Doble Protection Suite, RTS, or Test Universe software to verify communication assisted protection schemes. Perform installation, commissioning, testing and maintenance of protective relaying equipment, relaying schemes, DFR equipment, SCADA systems, distribution automation systems and associated communication equipment Assist in developing written standard commissioning, testing and maintenance procedures for protective relaying, DFR's, RTU's, IED's, Distribution Automation and associated communication systems. Generate customer report describing the problem found and correction action taken / proposed. Maintain a professional attitude when representing the company during phone or personal contact with outside vendors, customers or service providers etc. QUALIFICATIONS: Minimum of 5 years of field experience in commissioning, panel and equipment checkout, relay calibration, testing and repairing substation relaying and control schemes Experience is desirable in any of the following related areas: Substation commissioning; SCADA/Fault Data/SER/Integration-Automation equipment installation and testing Have a good understanding of various protocols (DNP3, Modbus, 8979, etc.). Have the ability to troubleshoot SCADA issues using various protocol test sets (Wireshark, ASE 2000, etc.) Experience in three phase power systems, power system protection, and control schemes Strong interpersonal and communication skills Proficient in Microsoft Office (Word, Excel and Outlook) Valid Driver's license and good driving record Must be able to distinguish color coding of wires, fiber optics or other materials required by essential job functions

TEAM UP WITH US! The Engine Technician III is responsible for providing high quality repair service on equipment, in order to respond to customer needs in a positive, caring and timely manner and to ensure maximum value for work performed. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Complete assigned jobs and task to meet flat rate times and re-do metric. * Work safely and follow all WCAT safety policies and procedures. * Complete related paperwork and access databases required to complete job (work order, parts order, JSA, DBS, SIMS, SIS web, STW) accurately and timely. * Follow contamination control and HAZMAT rules and regulations * Remove and install parts, disassemble and assemble components, and test and adjust assemblies with ability to self-monitor work quality. * Mastery level knowledge of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes and rigging equipment. * This position requires the ability to provide accurate quotes and pricing estimates to the customer. * Diagnose and troubleshoot problems, give recommendations for repairs and make all critical machine and engine repairs and adjustments. * Apply specific failure analysis and procedures in determining proper diagnosis * Test and verify correct operation of all repairs and adjustments. WHAT YOU'LL NEED: * High school diploma or general education degree (GED); or five to eight years related experience and/or training; or equivalent combination of education and experience. * Ability to mentor Machine team members Five years of database and project management experience. * Must be able to obtain or currently possess adequate tooling to perform duties. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedure manuals and write routine reports and correspondence. * Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form and the ability to deal with problems involving concrete variables in standardized situations. * Knowledge of Database software; Internet software; Manufacturing software and Order processing systems. * General knowledge of engines, electrical, electronic, hydraulic, mechanical, pneumatic systems and components. * Must be certified in air-conditioning. * Flexibility to work various schedules including shift work, required overtime and on call. * Successfully complete Work Steps assessment. * Clean driving record and ability to obtain CDL within 90 days of hire for field assignment. * Must be at least 21 to be assigned and operate field vehicle. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to climb or balance. The employee is occasionally required to sit or smell. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The noise level in the work environment is usually moderate. Required travel up to 40%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Keywords: mechanic, heavy equipment mechanic

The Sr. Field Service Rotator is responsible for performing basic to advanced maintenance functions, procedures, activities and responsibilities associated with working on gas compression packages. Duties include assisting other technicians with preventative maintenance, troubleshooting, diagnosing, repairing, installation, and commissioning of both gas-fired and electric driven compressor packages. The purpose of the Sr. Field Service Rotator is to acquire proficiency in performing advanced maintenance, new equipment installation, and overhaul actions with limited supervision. Principle Responsibilities and Duties * Represents the company in a professional manner at all times while providing outstanding customer service that aligns with Enerflex visions and values. * Responsible for submitting accurate field service reports, expense reports, timesheets and other necessary paperwork daily. * Responsible for directing, coordinating, and performance of the job activities in a manner consistent with the project's goals and objectives. * Responsible for providing full leadership and training to both new and junior level Field Technicians. * Possess knowledge and ability to independently diagnose engine/compressor failures accurately and efficiently. * Provides input to Supervisor on personnel and materials needs to provide optimal job planning. * Lead and complete, accurate, and timely rebuilds/overhauls of compressors, engines and controls on gas compressor packages in the field in adverse conditions with no supervision. * Responsible for accurate advanced level troubleshooting of electrical systems, controls, and unit control panels such as Murphy, Altronic, and Allen Bradley. * Responsible for accurately competing advanced engine tuning functions to adjust engine performance and emissions on multiple major OEM's (CAT/ Waukesha). * Possess knowledge and ability to respond and repair recurring problems and emergency services as needed independently. * Independently lead installation of new units including commissioning and start-up inspections with no supervision accurately. * Possess knowledge and ability to perform mechanical inspection using micrometers, pressure gauges, electronic diagnostic equipment and other specialty tools independently. * Must be able to be on a call-out rotation and effectively make emergency repairs. * Must recognize and comply with Health, Safety and Environmental rules and policies that are applicable to each location. * Other duties assigned by supervisor. Qualifications * High school diploma or general education degree (GED) and advanced vocational/technical training. * Must have 10+ years applicable experience * Must have proof of certification from CAT/ Waukesha (or equivalent) to: * CAT Gas I * CAT Gas II * CAT Electrical * Ariel Basic * Ariel Mechanical * CAT 3500 ADEM III * CAT 3500 ULB * Waukesha VHP * CAT 3600 ADEM III * CAT 3600 Master Mechanic * CAT Failure Analysis * Waukesha 9390 * Must also stay current on all updated OEM model specific training. Physical Requirements While performing the duties of this job, the employee is regularly required to stand and walk for long periods of time, stoop, squat, bend, and kneel. Lifting requirements will vary and may weigh up to 75 pounds on an infrequent basis and 35 pounds on a regular basis. Pushing and pulling valves, climbing stairs and ladders on a regular basis. Environmental factors include heat and humidity and onsite locations could be cold, rainy and muddy. A hard hat, safety glasses and ear plugs may be worn for 3 hours at a time and steel toe all day. About Us: Transforming Energy for a Sustainable Future. Enerflex is a premier integrated global provider of energy infrastructure solutions, covering gas processing, compression, power generation, refrigeration, cryogenic, energy transition, and water solutions. We proudly employ more than 5,000 highly skilled employees across over 25 countries worldwide. Enerflex places its core Values of Integrity, Commitment, Creativity, and Success into action across all aspects of the business. Our innovation, strong commitment to safety, and superior service to our customers positions us as the optimal partner to meet the needs of the dynamic energy industry. We foster a culture of ensuring our employees have the tools to do their jobs right, but to also thrive in their roles. We pride ourselves in our competitive wages, extensive rewards programs, celebration of successes of individuals and teams, and are committed to ensuring Enerflex remains a safe and inclusive space for all. What Enerflex Offers You: Full time employees enjoy the following benefits: * Generous healthcare, dental and vision plans * 401(k) employer matching * Generous paid time off program * Employee equity plan * Tuition reimbursement * Fun office environment Enerflex is an Equal Opportunity Employer Enerflex grants equal employment opportunity to all qualified persons without regard to race, color, sex, age, national origin, religion, genetic information, mental or physical disability, or any other characteristic protected by applicable federal, state, or local law. Equal employment opportunities are provided in recruitment, hiring, promotions, wages, benefits, and other terms, conditions, and privileges of employment. Disclaimer The above statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, tasks, duties, knowledge, skills, and abilities required. Nearest Major Market: Midland Nearest Secondary Market: Midland

A great Client in Odessa is seeking to find an Electromechanical Tech - Job description:This position is for an industrial field services company operating with high standards of field and shop services in the Permian Basin. They value safety, quality, expertise and customer success while striving to maintain their employees work life balance. Role Summary/Purpose: The Electromechanical Technician, performs a wide variety of tasks both in shop and in the field involving electric motors, generators, switch gear, transformers and other powered equipment. Responsibilities include dismantling, rewinding, brazing, insulating, bracing, re-wedging, working with epoxies, retaining ring removal & refitting. Work is performed in accordance with approved instructions and direction of the shop manager.Essential Functions: Inspects motor/generator equipment for damage and evidence of malfunctions. Refurbishes, tests and rewinds motors/generators and repairs other electromechanical equipment. Dismantles and/or strips damaged or unserviceable mechanical equipment. Operates mobile equipment, tools & machinery efficiently and accurately. Maintains clean work areas, machines and equipment. Ensures correct documentation is used and filled out as specified on inspection and test plans, work instructions and any quality documents. Ensures that all specified records are correctly taken, reviewed and approved. Ensures that work is carried out in a safe manner and that relevant Safety and Quality documentation is complete for the task in hand. Ensures all lifting equipment is correctly used, and prior to use confirms its current inspection status. Ensures all work under their control is properly protected against damage while in the workshop or on site and correctly packages equipment for transport to ensure protection against damage. Complete all online and classroom training sessions. Qualifications/Requirements Willingness and flexibility to travel locally when required on short notice including off hours call outs. Minimum 3 years of experience with maintenance, repair of electromechanical equipment. Computer proficiency in MS Word, Excel and general use. Solid communication, planning, technical and people skills Ability to demonstrate strict compliance to safety standards Able to work without supervision and able to execute tasks when engaged on solo basis Able to work in a team environment and cooperate with fellow workers. Ability to clearly communicate in writing and verbally in English is a must. Capable and qualified to perform field work. Desired Characteristics Maintains a consistently high standard of housekeeping Ensures proper use and storage of equipment and chemicals Works safely at all times Capable of creative thinking and quick problem solving Innovative Team player Self-motivated Job Type: Full-time License/Certification: Driver's License (Required) Willingness to travel: 25% (Preferred)

Based out of Granbury, Texas, BC Tech Pro partners with techs all over the country to complete on-site hardware warranty services in their territories. If you love working on computers and want to get out from behind a desk, come work with us! Job Description This is a Computer Field Technician Position doing hardware repairs and installations on laptop and desktop units. To be successful in this position, you must have prior experience with laptop and desktop hardware. Job Details: This is a 1099/per call position Pay is based solely on the number of calls completed. Calls start at $35 and go up based on distance traveled Pay period: Every Friday after the first week worked Tickets are run Monday-Friday during the day shift. Candidates must be regularly available a minimum of 3 weekdays to be considered. Call volume is variable but is usually 2-5 calls per day You will complete certifications from Dell and Lenovo as part of your onboarding. Certifications are online and free to you. You must have a reliable form of transportation and a valid driver's license to run these calls. You will be visiting multiple work sites throughout your day. You must have access to a computer and the Internet to log onto your portal each day. You must be available to log into your tech portal each morning you are working by 9 am to code your calls and map out your route for the day. The manufacturer has completed troubleshooting and shipped a part prior to your ticket being issued to you. You will confirm service times with the customer in your tech portal. Services will be completed at the customer site (residential and commercial) You will pick up parts daily from the assigned Fed Ex or UPS store for your territory before going onsite. Once all calls are completed for the day drop off the old parts with the pre-paid label that is provided. Qualifications Must have prior hands on experience with replacing components on laptops and desktops Must have a valid driver's license and reliable transportation Must be comfortable with daily local travel Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Minimum of $22 per hour guaranteed for the first year! Earning potential is much higher! Schedule: 2 days off during the week; during slower season enjoy a four-on, three-off schedule. Bonus Opportunity: Earn a Trained and Active Bonus of $1000.00, paid in two installments: $500.00 at 60 days of employment and $500.00 at 6 months. About Us: At Southern Star, we are the driving force behind award-winning DISH TV service and innovative home entertainment products. As a Southern Star technician, you will be more than a service provider; you will be a technology ambassador, enhancing the way customers interact with technology. Compensation: Base Pay and Commissions: Start with a competitive hourly rate and earn commissions. Performance Incentives: Boost your earnings with performance bonuses. First-Year Potential: Earn between $50,000 - $60,000 or more in your first year. Experienced Technicians: Earn between $60,000 - $85,000+ annually. Training and Growth: Paid Training: Comprehensive training to ensure your success. Support: Continuous support to help you achieve your career goals. Benefits: Insurance: Comprehensive insurance benefits. Retirement: 401K plans. Paid Time Off: Generous paid time off. Life Insurance: Company paid $25,000 life insurance policy. Company Vehicle: Provided upon completion of training. Device Plan: Monthly stipend for using your own smartphone. Employee Discounts: Exclusive discounts through LifeMart, including home mortgage lender savings. Role Requirements: Technical Skills: Strong technical knowledge and the ability to scale ladders up to 38 ft and navigate crawl spaces. Travel: Willingness to travel up to 20% of the time (lodging and per diem covered by SSI). Communication: Excellent communication and customer service skills. Sales: Ability to upsell while installing DISH systems. Time Management: Effective time management skills. Must have a clear Background, Drug Screen and Motor Vehicle Record Join Us: Become a part of Southern Star and transform the way customers experience home entertainment. Apply today and unlock your potential! #INSSMST #ZR

Reinvigorate your career with an organization that values teamwork, expertise, and integrity. We're looking for an experienced Lead Valve Services Technician to join our growing team and take a leadership role in managing valve service operations, customer relationships, and business growth opportunities. This position is ideal for someone with hands-on relief valve experience, strong organizational and communication skills, and a passion for delivering top-quality service in the oil and gas industry. Who we are: At the Crimson Group, we provide our clients with high-value automation, instrumentation, electrical design, and process operation solutions. With the capabilities of a large enterprise, and the agility and responsiveness of a small company, we are a customer-focused provider of automation and integrated solutions. Crimson Group provides total integration of design, project management, panel manufacturing, installation/commissioning, maintenance, and repair for North America and select international markets. What we Offer: Competitive hourly compensation. Comprehensive benefit package and 401k plan. A company laptop and cell phone reimbursement. An environment of continuous learning with the opportunity to enhance your skills & experience and grow within the organization. The opportunity to participate in charitable events through our charity, RedTail Community Foundation. What you will be Doing: Oversee and execute valve testing, inspection, repair, and maintenance activities. Assist with scheduling, resource allocation, and service documentation for multiple client projects. Develop and maintain strong client relationships to ensure satisfaction and repeat business. Lead, mentor, and support valve technicians in the field and shop, ensuring safety and quality standards are upheld. Perform or supervise testing and calibration of relief valves to meet company and safety standards. Assist in troubleshooting and problem-solving of complex valve issues. Track project progress, costs, and customer requirements to ensure timely delivery. Collaborate with operations, sales, and management to identify growth opportunities in valve services. Support business development by identifying client needs and assisting with proposal or quote preparation. Maintain detailed records of work performed, certifications, and compliance documentation. Your Skills and Qualifications: 3-5+ years of hands-on experience with relief valves, safety valves, and related pressure control equipment. Previous experience in a lead technician, coordinator, or supervisory role. Proven customer service and account management skills with the ability to build trust and long-term relationships. Excellent leadership, communication, and organizational skills. Proficiency with scheduling tools, maintenance tracking systems, and Microsoft Office Suite. Ability to manage competing priorities and meet deadlines in a fast-paced service environment. A valid driver's license and willingness to travel occasionally to client sites. Technical training or certification in mechanical, instrumentation, or valve technology. Background in oil & gas, industrial maintenance, or manufacturing. Safety-conscious, reliable, and proactive approach to problem-solving. A results-driven mindset with a focus on quality, customer satisfaction, and continuous improvement. **As part of our commitment to maintaining a safe and professional work environment, the Crimson Group of Companies conducts comprehensive background checks and drug and alcohol testing on all prospective employees as part of the final offer process. These checks are intended to verify the accuracy of information provided by candidates and assess any potential risks to the company or its employees. All offers of employment are contingent upon the successful completion of these background checks.** Please note: We do not accept phone calls regarding job opportunities. To ensure fairness and consistency in our hiring process, all candidates must follow the application instructions outlined in the posting. Thank you for your understanding.

SUMMARY OF RESPONSIBILITIES: Conduct commissioning, testing, maintenance and repair of complex protective relaying schemes in generation, transmission, and distribution substation environments. Be able to operate various types of electrical test equipment including but not limited to Omicron, Doble, Vanguard, etc. This position requires an intermediate to strong level of understanding of interfacing software such as Test Universe, Protection Suite, AcSELerator, Wireshark, etc. Facilitate the retrofit, upgrade, and replacement projects for electrical controls, SCADA, DCS, and Power System Protection Equipment. ESSENTIAL JOB FUNCTIONS: Test over current/voltage, Directional, Distance, Impedance, Sync Check, Loss of field, reverse power, Multifunction relays etc. Perform function testing of substation control circuits on relay panels, transformers & circuit breaker controls. Perform isolation, setpoint testing, advanced logic testing, and scheme testing (reclosing, breaker failure, etc.) Perform end-to-end relay testing using Doble Protection Suite, RTS, or Test Universe software to verify communication assisted protection schemes. Perform installation, commissioning, testing and maintenance of protective relaying equipment, relaying schemes, DFR equipment, SCADA systems, distribution automation systems and associated communication equipment Assist in developing written standard commissioning, testing and maintenance procedures for protective relaying, DFR's, RTU's, IED's, Distribution Automation and associated communication systems. Generate customer report describing the problem found and correction action taken / proposed. Maintain a professional attitude when representing the company during phone or personal contact with outside vendors, customers or service providers etc. QUALIFICATIONS: Minimum of 5 years of field experience in commissioning, panel and equipment checkout, relay calibration, testing and repairing substation relaying and control schemes Experience is desirable in any of the following related areas: Substation commissioning; SCADA/Fault Data/SER/Integration-Automation equipment installation and testing Have a good understanding of various protocols (DNP3, Modbus, 8979, etc.). Have the ability to troubleshoot SCADA issues using various protocol test sets (Wireshark, ASE 2000, etc.) Experience in three phase power systems, power system protection, and control schemes Strong interpersonal and communication skills Proficient in Microsoft Office (Word, Excel and Outlook) Valid Driver's license and good driving record Must be able to distinguish color coding of wires, fiber optics or other materials required by essential job functions

TEAM UP WITH US! The Engine Field Tech II is responsible for providing high quality repair service on equipment, in order to respond to customer needs in a positive, caring and timely manner and to ensure maximum value for work performed. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Complete assigned jobs and task to meet flat rate times and re-do metric. * Complete related paperwork and access databases required to complete job (work order, parts order, JSA, DBS, SIMS, SIS web, STW) accurately and timely. * Remove and install parts, disassemble and assemble components, clean and inspect assemblies with minimal supervision. * Understand and apply CAT reusability guidelines. * Timely parts and core returns with appropriate documentation. * Perform warranty downloads of ECM. * Diagnose and troubleshoot problems, give recommendations for repairs and make all critical engine repairs and adjustments. * Test and verify correct operation of all repairs and adjustments. * Apply general failure analysis and procedures to determine proper diagnosis. * Accurate and timely service reports and timecards daily. * Perform engine and component rebuild with limited supervision. WHAT YOU'LL NEED: * High school diploma or general education degree (GED); or suggest three to five years related experience and/or training; or equivalent combination of education and experience. * AA in Applied Diesel Technology, preferred. * Knowledge of database software, internet software, manufacturing software and order processing systems. * Must be at least 21. * Proficient use of basic hand tools, air tools, precision measuring tools and instruments, laptops, diagnostic software and cranes and rigging equipment. * Product knowledge of gas, diesel, electrical, electronic, and mechanical and components. * Ability to provide accurate quotes. * Successfully complete Work Steps assessment. * Flexibility to work various schedules including shift work, required overtime and on-call. * Knowledge of Database software; Internet software; Manufacturing software and Order processing systems. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this Job, the employee is regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl and talk or hear. The employee is frequently required to climb or balance. The employee is occasionally required to sit or smell. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts and toxic or caustic chemicals. The employee is frequently exposed to wet and/or humid conditions; high, precarious places; fumes or airborne particles; outside weather conditions; extreme cold and extreme heat. The employee is occasionally exposed to risk of electrical shock and vibration. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate Required travel up to 40%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Keywords: mechanic, heavy equipment mechanic