Field technician jobs in Tuckahoe, VA - 392 jobs

Company Canon U.S.A., Inc. Requisition ID 33910 Category Field Service Type Full-Time Workstyle Full-Time On Site About the Role The best problem solvers are true knowledge seekers. Providing a high level of technical support is no simple feat in dynamic environments. You must be willing to learn and comprehend new products and skills at a moment's notice.If you're in the business of supplying seamless and expert operational, maintenance, and networking support and thrive in a 24/7 customer-driven setting, we want to hear from you. Canon USA, a pioneer in technology, solutions, and services, is actively on the lookout for a Field Service Technician III to make an immediate impact on our talented team. Your Impact We're searching for a true go-getter to: - Diagnose mechanical, software, network, and system failures, using established procedures. - Service and repair designated equipment to Canon standards and specifications. - Report product failure trends and serviceability issues to managers with necessary supported documentation, ensuring accurate information and recordkeeping. - Help meet and exceed customer demands by providing efficient, responsive, and accurate Field/Shop/on-site maintenance. - Diligently maintain all technical information, Field Service Reports, Expense Reports, and Canon property assigned. - Control all technical information and Canon property assigned. - Assist with the solutions of escalated technical and/or customer service-related problem areas for any territory when requested. - Maintain complete working knowledge, aptitude, and ability to repair multiple product lines including troubleshooting, diagnostics, and preventive maintenance. - Communicate with supervisors and other departments regarding the solution of escalated technical and/or customer service-related problem areas. - Interface with customer IT depts. About You: The Skills & Expertise You Bring Please note: this is a customer-facing role, and requires compliance with customer policies and protocols, which may include COVID-19 vaccination and other measures relating to COVID-19. We're looking for a dedicated individual with: - Typically requires general and/or vocational training plus 2 to 4 years of related experience. - An Associate's degree in electronics or electrical engineering capacity from an accredited college or technical school or equivalent experience. - Direct experience working as a field technician. - The capacity to meet or exceed the minimum performance standards for productive technical quality and customer satisfaction for assigned territory. - The ability to travel (valid driver's license and acceptable driving record necessary). - Capable of excelling in a 24/7 environment, while performing shift work and on-call rotations. - Required to take all necessary steps to obtain security and/or other clearances required by customers to enter the customers' premises. - Must be able to lift 50 pounds and be active more than 50 percent of the time (walking, standing, stooping/kneeling). We are providing the anticipated base salary range for this role: $24.29-$36.53 Hourly. This role is eligible for a transportation allowance Company Overview About our Company - p { font-size: 18px; } Canon U.S.A., Inc., is a leading provider of consumer, business-to-business, and industrial digital imaging solutions to the United States and to Latin America and the Caribbean markets. With approximately $28.5 billion in global revenue, its parent company, Canon Inc., as of 2024 has ranked in the top-10 for U.S. patents granted for 41 consecutive years*. Canon U.S.A. is dedicated to its Kyosei philosophy of social and environmental responsibility. To learn more about Canon, visit us at ***************** and connect with us on LinkedIn at company/canonusa. Who We Are Where Talent Fosters Innovation. Do you want your next professional experience to be filled with purpose and opportunity, world-class team members, and impactful work? Driven by our mission of exceeding customer expectations with our technologies and enriching the lives of our local communities and staff, we are a phenomenal team working collaboratively toward common goals. Our employees have a strong work ethic, creativity, and a cooperative spirit. We believe in integrity, respect, empowerment, and making a difference in the communities we serve. There is a strong sense of pride in what we do individually and together as a team. Join us and discover what it means to work for a global digital imaging leader with an unparalleled reputation for quality and innovation. What We Offer You'll be joining a leader in digital imaging and innovation with an immense opportunity to make an impact and create your own rewarding career. We demonstrate commitment to our employees by offering a full range of rewards, including competitive compensation and benefits. And Even More Perks! -Employee referral bonus -Employee discounts -"Dress for Your Day" attire program (casual is welcome, based on your job function) -Volunteer opportunities to give back to our local community -Swag! A Canon welcome kit and official merch you can't get anywhere else *Based on weekly patent counts issued by United States Patent and Trademark Office. All referenced product names, and other marks, are trademarks of their respective owners. Canon U.S.A., Inc. offers a competitive compensation package including medical, dental, vision, 401(k) Savings Plan, discretionary profit sharing, discretionary success sharing, educational assistance, recognition programs, vacation, and much more. A more comprehensive list of what we have to offer is available at about-us/life-at-canon/benefits-and-compensation We comply with all applicable federal, state and local laws, regulations, orders and mandates, including those we may be required to follow as a federal government contractor/subcontractor. You must be legally authorized to work in the United States. The Company will not pursue or support visa sponsorship. All applicants must reside in the United States at the time of hire. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If you are not reviewing this job posting on our Careers' site about-us/life-at-canon, we cannot guarantee the validity of this posting. For a list of our current postings, please visit us at about-us/life-at-canon. #CUSA Workstyle Description Full-Time On Site - This position requires full-time presence at your assigned office(s)/worksite(s)/territory on your scheduled work days. Posting Tags #li-rh1 #pm119 Need help finding the right job? We can recommend jobs specifically for you! Click here to get started.

Join Our Team! Sunbelt Rentals strives to be the customer's first choice in the equipment rental industry. From pumps to scaffolding to general construction tools, we aim to be the only call needed to outfit a job site with the proper equipment. Not only do we offer a vast fleet that ranks among the best in the industry, we pair it all with a friendly and knowledgeable staff. Our employees are our greatest asset, and although we present a comprehensive equipment offering, our expertise and service are what truly distinguish us from the competition. We pride ourselves on investing in our workforce and offer competitive benefits, as well as extensive on-the-job training for all eligible employees. As a highly successful national company, we are constantly looking for talented individuals to support our growth. If you are interested in pursuing a rewardingcareer, we invite you to review our opportunities! Job Description Summary Base Pay Range: $24.05 - 33.06 Starting rate of pay may vary based on factors including, but not limited to, position offered, location, education, training, and/or experience. Please visit careers/ for more information on our benefits and to join our Talent Network. Sunbelt also provides a comprehensive benefits package to its full-time employees. This package includes: Health, Dental and Vision plans 401(k) Match Volunteer time off Short-term and long-term disability Accident, Life and Travel insurance, as well as flexible spending Tuition Reimbursement Options Employee Assistance Program (EAP) Length of Service Awards You will become eligible for benefits on the first of the month following 30 days from your start date. Sunbelt offers team members the following paid time off from work, subject to Sunbelt's policies (unless specified in a collective bargaining agreement): 12-25 vacation days depending on years of service 5 sick days 6 holidays 2 half day holidays 2 floating holidays 1 inclusion day 1 volunteer day Gear up for an exciting career! Sunbelt Rentals supports service members. Veterans encouraged to apply.

** Hobart Service, an Illinois Tool Works Company, has been in business for over 125 years and is the trusted source for Commercial Food Equipment Service Solutions. We have over 1,700 associates nationwide who serve as valued partners to our customers. Our employees are dedicated to providing the best customer service, give back to the communities where they live and work, and demonstrate the ITW values of Integrity, Simplicity, Trust, Respect and Shared Risk. **Job Description** Are you mechanically and electrically inclined? Do you like providing customers with quality service solutions? Join our team and become a part of the leading nationwide provider of commercial food equipment service! + You will work with customers to electrically/mechanically troubleshoot, diagnose, repair, and maintain a variety of commercial food equipment to include cooking, food preparation, ware washers, weigh wrap, baking and refrigeration. + You will typically leave from home each morning and work with minimal direct supervision at customer sites. + You will meet or surpass weekly productivity and customer-oriented goals while maintaining a high level of customer service. **Qualifications** **What you'll bring to the table:** + An accredited High School Diploma or GED and 4-6 years of similar electrical/mechanical experience + You must have a valid Driver's License and ability to drive multiple hours daily + You should be able to work Overtime and On-Call as required + You must be able to attend our industry leading training at our corporate headquarters in Troy, OH **Physical Demands & Work Environment** _The physical demands and work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions._ Physical Demands While performing the duties of this Job, the employee may: + Lift up to 75 lbs with or without assistance + Climb up to 10 ft with an A-frame ladder + Occasional roof access may be necessary through extension ladders or fixed ladders greater than 20 feet + Extensive walking 3-5 miles / day + Extensive driving 5-6 hours/day + Kneel, squat, bend, push/pull + Move in different positions to accomplish tasks in various environments including tight and confined spaces + Operate motor vehicles or heavy equipment + Operate machinery and/or power tools Working Conditions + Office facility and customer facilities (including commercial kitchens of various types of businesses) + Exposure to noise, heat, cold, slippery, wet dirty conditions may occur + Travel requirement up to 50% of time Hours of Work + Normal business hours with occasional/frequent/extended hours as needed + Flexibility with schedule to meet critical deadlines + Extended hours may include nights and/or weekends + Normal scheduled hours cover early mornings, evenings and/or weekends **Additional information** **Why work for us?** + Competitive pay + Great insurance options with low premiums + Paid vacation and holidays + 401K with company match + Extensive on-the-job, online, and classroom training + Service vehicle, uniforms, and safety equipment provided + Safety-conscious work environment Hobart Service is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. ITW and Hobart Service are committed to providing a healthy and safe environment for all employees. To demonstrate this commitment, Hobart Service is tobacco-free (including e-cigarettes) on campuses and within company vehicles and maintains a drug-free workplace. If you are a qualified individual with a disability and are unable or limited in your ability to use or access the online application system process due to your disability, please contact Human Resources at **************************** to request assistance. No other requests will be acknowledged. _ITW is an equal opportunity employer. We value our colleagues' unique perspectives, experiences and ideas and create workplaces where everyone can develop their careers and perform to their full potential._ _As an equal employment opportunity employer, ITW is committed to equal employment opportunity and fair treatment for employees, beginning with the hiring process and continuing through all aspects of the employment relationship._ _All qualified applicants will receive consideration for employment without regard to race, color, sex, gender identity, sexual orientation, religion, national origin, age, disability, protected Veteran status or any other characteristic protected by applicable federal, state, or local laws._

Pinnacle Live is a premium, in-house AV partner. We elevate live event expectations for people and venues who demand better. With an expert balance of big-picture problem-solving and boots-on-the-ground execution, we deliver bespoke AV solutions for in-person, virtual, and hybrid meetings and live events. The most impressive, impactful meeting and events all have the same common denominator: dedicated, determined people working behind-the-scenes to make it happen. We're looking for those people. Pinnacle Live is a Collaborative Crusader. We empower you to tackle tough challengestodeliver unforgettable hospitality and live event experiences. Job Summary TheOnCall Event Services Technician is responsible for assisting with the flooroperations, including setup,strikeand operation of technology solutions in a hotel or hospitalityenvironment with a focus on delivering unmatched customer service to our guests and clients. Essential Functions Ensure all event sets and strikes are completed according to Company SOPs. Greet guests/clients before event and provide clear instructions on how to operate equipment. Provide continued communication with client to ensure success of all events Follows through on all client requests Look for opportunities to enhance client's event Maintain accurate client event information within the Company's business systems Review daily invoices with client and obtain client's signature on invoice(s) Comply with all Company security and safety measures and is constantly aware of the property inventory and location of equipment and ensures inventory is secure from theft and /or damage Ensure all inventory is in good working order and rental condition Ensure any lost stolen or damaged equipment is immediately reported to management. Ensure inventory is secure from theft and/or damage. Make sure all Company occupied areas are clean, organized, and up to Company standards Continually work toward enhancing and improving technical skills to include audio, video/data, staging and computer operation and networking. Comply with all Company policies and procedures Other duties as assigned. Education & Experience High School Graduate or equivalent Prior exposure to audio-visual and/or hospitality industry Computer proficiency (hardware,software,and networking) Required Skills & Knowledge To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed herein are representative of the knowledge, skill, and/or ability required. Strong technical aptitude Good working knowledge of computer hardware and software Planning ability; able to plan, prioritize Strong interpersonal skills Excellent verbal and written communication skills Excellent organizational skills and attention to detail Strong team player orientation Commitment to best-in-class customer service for internal and external stakeholders Professional appearance Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sit at a desk Stand or walk for long periods, including up and down stairs Consistently bend and stoop Use hands to hold, handle, or feel Reach with hands and arms Talk, hear and communicate. Lift up to 50 pounds occasionally Pinnacle Live is an E-verify and Equal Employment Opportunity Employer Pinnacle Live is committed to welcoming, valuing, and supporting every person and their unique contributions. We are actively working to foster an environment where diversity, equity, inclusion, belonging, and mutual respect thrive. We recognize that diversity is intersectional, and that actively valuing diversity demands that we continually strive to establish a welcoming atmosphere for all. Pinnacle Live welcomes, openly acknowledges, empowers, and celebrates the diversity of all our team members, clients, and partners, and affirms the identities and experiences of all our members. We strive to create an environment where we actively embrace all forms of diversity. #LI-DNI

We are currently offering a $1,500 sign-on bonus for Heavy Equipment Shop Technician new hires, payable after 90-days of employment. Carter Machinery Company, the authorized Caterpillar dealer serving Virginia, West Virginia, Maryland, Delaware and Washington D.C. is hiring a Compact Construction Equipment Shop Technician in Richmond, Virginia. The Compact Construction Equipment Shop Technician position is responsible for troubleshooting, diagnosing, and performing complex repairs to both Caterpillar and allied equipment. Seeking candidates with previous experience with heavy construction equipment and work tool repair; Must have experience performing complex mechanical, electrical, and computer repairs; Two years' experience as a Mechanic Technician B, preferred; High school diploma or GED required. Requirements for the Compact Construction Equipment Shop Technician position include: Self-starter able to work with limited supervision. Must be able to occasionally operate heavy machinery Strong mechanical aptitude and expert level troubleshooting skills; able to accurately diagnose and repair equipment. Must be willing to work shifts as needed, including days, nights, and/or weekends to meet customer needs. Must be self-directed, organized and be able to lead and mentor other technicians. Must be able to positively interact with supervisor and to understand problems and concerns relating to a repair. Must be able to perform job in sometimes stressful situations due to circumstances. Must be able to perform in situations requiring speed and deadlines. Proficient in the use of a computer, Microsoft Office products and service software. Strong written and verbal communication skills. Promote a positive customer experience. Uphold the Core Values of Integrity, Commitment, Excellence and Teamwork by embracing The Carter Way. Physical requirements must be met for the Compact Construction Equipment Shop Technician job, including the ability to lift, carry and maneuver items up to 70 pounds, including bulky objects. This position requires repeated reaching, standing, stooping, kneeling, bending and climbing beside, onto and under a variety of heavy equipment. Specific vision abilities required by this job include close vision, distance vision and ability to adjust focus. This job description is not intended to be all-inclusive. Additional duties may be assigned. Competitive Compensation and Benefits: Health, dental and vision insurance. Paid time off. 401(k), $0.75 to $1.25 match up to 6%. Life and disability insurance. In-house training instructors/programs. Tuition reimbursement. Employee referral bonus program. Discounts: cellular phone service, computers, tooling, cars and trucks. Carter Machinery Co. Inc. is an EEO/AA Employer. All qualified individuals - including minorities, females, veterans, and individuals with disabilities, or any other characteristic protected by law - are encouraged to apply. Carter Machinery is a drug-free workplace. *Special rules and restrictions may apply to sign-on bonus eligibility for rehires. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

The Military Field Service Representative (FSR) located in Tolemaida, Colombia, will support the Colombian military in their operation, management, repair, installation, and maintenance of assigned GE equipment for starting up and operating a T700 engine depot. In this role, the FSR will act as a liaison between GE Aerospace and the customer. Candidates must be mobile to meet the needs of the customer, program and business. **Job Description** **Job Title** T700 Depot Military Field Service Representative - Tolemaida, Colombia **Company Intro/About GE Aerospace** GE Aerospace is a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We power flight safely and reliably for today, tomorrow, and the future, partnering closely with customers to deliver high-quality outcomes with speed and efficiency. **Site, Business, OR Functional Area Overview** This role supports the startup and sustained operation of a T700 engine depot in Tolemaida, Colombia, serving the Colombian military's helicopter fleet. The Field Service organization is focused on operational readiness, on-time delivery, and cost-effective maintenance solutions that meet contractual and mission requirements. **Role Overview** The Military Field Service Representative (FSR) will serve as GE Aerospace's on-site liaison to the Colombian military, supporting depot startup and ongoing repair, installation, troubleshooting, and maintenance activities for T700 turboshaft engines. The FSR will coordinate technical support, drive issue resolution, and enable customer success while meeting contractual, safety, and quality objectives. **Key Responsibilities** + Act as the single point of contact to the customer for timely resolution of depot-level tooling, maintenance, repair, and engine management concerns + Establish and maintain strong on-site relationships to provide ongoing technical and business support + Provide hands-on technical assistance leveraging in-depth knowledge of T700 installation, operation, and troubleshooting to keep the customer on schedule + Use disciplined analytical methods to drive root-cause analysis; create presentations and spreadsheets (including pivot tables and Pareto charts) to track issues and implement lasting corrective actions + Exercise sound judgment to propose solutions beyond set parameters for complex maintenance and troubleshooting scenarios, drawing on internal and external resources + Lead low-risk projects and serve as a resource for colleagues; explain technical concepts and build consensus across maintenance, engineering, and management stakeholders + Uphold and promote safety, quality, delivery, and cost objectives; ensure compliance with export control and security requirements **Required Qualifications** + Fluent in Spanish and English (reading, writing, and speaking) + Bachelor's degree from an accredited college or university; or a High School Diploma/GED plus a minimum of 4 years in a field service representative or jet engine maintenance role + Minimum 3 years of field maintenance, modification, and repair experience on T700 engines + Strong oral and written communication skills with demonstrated ability to analyze and resolve problems + Ability and willingness to travel as required + Ability and willingness to obtain and maintain a U.S. Government security clearance **Desired Characteristics** + 5+ years of hands-on turboshaft engine maintenance experience + T700 experience across depot, organizational, intermediate, and flight line troubleshooting levels + Strong customer interaction and communication skills; proven leadership abilities + Demonstrated proficiency in repair troubleshooting, shop operations, testing of jet engines, and support equipment tooling + Ability to make formal presentations to maintenance, engineering, and management at all levels + Project management experience; ability to lead and influence customers and peers + Experience mentoring and transferring technical knowledge; strong written and oral communication + Ability to work independently with technical guidance as needed + High degree of tact and diplomacy to collaborate effectively with customers at all levels + FAA Powerplant license (preferred) **Additional Information** The base pay range for this position is $100,000.00-133,000.00 USD Annual The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 23rd, 2026 GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage, access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits includ tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time -off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or prog rams (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. © 2023 GE Aerospace and/or its affiliates. All rights reserved. Attorney-Client Privileged **Closing** At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Closing At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherw _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Based out of Granbury, Texas, BC Tech Pro partners with techs all over the country to complete on-site hardware warranty services in their territories. If you love working on computers and want to get out from behind a desk, come work with us! Job Description This is a Computer Field Technician Position doing hardware repairs and installations on laptop and desktop units. To be successful in this position, you must have prior experience with laptop and desktop hardware. Job Details: This is a 1099/per call position Pay is based solely on the number of calls completed. Calls start at $35 and go up based on distance traveled Pay period: Every Friday after the first week worked Tickets are run Monday-Friday during the day shift. Candidates must be regularly available a minimum of 3 weekdays to be considered. Call volume is variable but is usually 2-5 calls per day You will complete certifications from Dell and Lenovo as part of your onboarding. Certifications are online and free to you. You must have a reliable form of transportation and a valid driver's license to run these calls. You will be visiting multiple work sites throughout your day. You must have access to a computer and the Internet to log onto your portal each day. You must be available to log into your tech portal each morning you are working by 9 am to code your calls and map out your route for the day. The manufacturer has completed troubleshooting and shipped a part prior to your ticket being issued to you. You will confirm service times with the customer in your tech portal. Services will be completed at the customer site (residential and commercial) You will pick up parts daily from the assigned Fed Ex or UPS store for your territory before going onsite. Once all calls are completed for the day drop off the old parts with the pre-paid label that is provided. Qualifications Must have prior hands on experience with replacing components on laptops and desktops Must have a valid driver's license and reliable transportation Must be comfortable with daily local travel Additional Information All your information will be kept confidential according to EEO guidelines.

The Environmental Field Laborer (Field Tech) must be able to work in compliance on various remediation and industrial maintenance projects. They must adhere to and maintain strict compliance with corporate/office policies and procedures, established health and safety protocols, and all applicable local, state, and federal regulations. JOB RESPONSIBILITIES: Execution of field work encompassed in remediation and industrial maintenance projects while under direct or indirect supervision. Correct completion of all job-specific, employee-related MER paper work including Timesheets, Daily Work Reports, Driver's Logs and Daily Tailgate Safety Meeting Forms. Understand and work within project's detailed scope-of-work to maintain strict compliance with contract documents, project schedules, and corporate policies and procedures. Work safely during all phases of performing the job duties required in the field. Ability to perform work inside areas of varying dimensions; involving squatting and crawling for possible extended periods. Ability to follow directions; read/speak and understand English; read and understand common danger placards / labels and hazardous warning literature including site safety plans. The ability to safely drive and perform safety checks on all vehicles for which licensed. Project work may require out of town travel for two weeks or more Must be able to understand and comply with company and client safety standards. Due to the diversity of both scheduled and non-scheduled projects, physical demands, and environmental conditions vary significantly depending on the project. Work outside year round in all types of weather. May work in environments that are extreme in nature like environmental conditions such as heat, cold, heights, hazardous chemicals, loud noises, dangerous equipment, long hours etc. May be exposed to varying levels of physical activities and physical extremes such as long periods of standing, walking, crouching, use of hands, and heavy lifting of up to 50 pounds or more. Must be clean shaven at all times to allow immediate donning and seal of respirator. QUALIFICATIONS: Requires High School Diploma or GED (or equivalent reading, writing and reasoning skills). Experience in emergency response, manual labor, general construction and/or industrial cleaning is preferred. A valid Class “D” Driver's License is required. TWIC preferred. OSHA 40-HR HAZWOPER & Confined Space Entry certifications are desired but not required. Successful completion of a pre-employment background and substance screening process including, but not limited to, employment verifications, criminal search and Motor Vehicle Record (MVR) search as well continued verifications throughout employment to ensure that all records meet company policy standards. BENEFITS: Competitive Salary Health, Dental, and Vision Insurance 401k with Company Match PTO Paid Holidays Moran Environmental Recovery is an Equal Opportunity Employer.

Veolia is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Water Tech brings together a dedicated team of experienced professionals committed to tackling the world's most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description Join Veolia as a Field Service Representative (FSR) in our Chemical Solutions and Monitoring (CSM) division and advance your career in hands-on technical service and sustainability! About This Opportunity We're seeking a Field Service Representative to deliver exceptional on-site technical service as technical liaison between Veolia and our industrial customers. You'll work with a team and independently at a refinery customer's site, providing installation, maintenance, and troubleshooting services for chemical feed equipment and water treatment systems while building lasting customer relationships through technical excellence. What You'll Do ● Technical Service & Installation: Install, commission, and service chemical feed equipment, pumps, controllers, and instrumentation systems at customer locations ● Customer Consultation: Act as technical consultant providing recommendations, training, and solutions to customer management and technical teams ● System Optimization & Troubleshooting: Perform water analysis, calibrate equipment, program controllers, conduct preventative maintenance, and diagnose/resolve system issues through remote support technologies and on-site interventions ● Documentation & Compliance: Maintain detailed service reports, inventory management, and ensure all safety protocols are followed ● Territory Management: Support multiple customer sites within assigned territory, coordinating with sales teams for optimal service delivery Qualifications What We're Looking For Education & Experience: ● Technical degree/diploma in Electrical, Electronic Technology, Instrumentation, Mechanical Engineering, or related discipline preferred, a high school diploma or GED is required. ● 2+ years of experience in instrumentation & electronics, plant operations/maintenance, or equivalent technical training ● Familiarity with water treatment processes and industrial equipment preferred ● A full valid driver's license and willingness to travel (a learner's permit or G1/G2 class will not qualify) Key Characteristics: ● Strong troubleshooting abilities for electrical and mechanical systems ● Excellent communication and customer service skills ● Self-motivated with ability to work independently and manage multiple priorities ● Safety-minded approach with ability to work in various industrial environments ● Physical ability to lift up to 50 lbs and perform precision work ● Computer proficiency and mathematical skills for technical analysis What Success Looks Like: ● Consistently deliver high-quality technical service that exceeds customer expectations ● Successfully complete installations, commissioning, and troubleshooting projects on time ● Build strong customer relationships through technical expertise and professional service ● Maintain safety standards and compliance in all industrial environments ● Contribute to territory growth through technical excellence and customer satisfaction ● Demonstrate continuous learning and adaptation to new technologies Additional Information Compensation - The salary range is tied to the market for similarly benchmarked roles. The range is not an absolute, but a guide, and offers will be based on the individual candidate's knowledge, skills, experience, and market conditions, as well as internal peer equity. Depending upon all the preceding considerations for the final selected individual candidate, the offer may be lower or higher than the stated range: $70,000-90,000 annually. At Veolia, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We're an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. Because our people are our greatest assets, we also offer competitive compensation and benefits that include: ● Medical, Dental, & Vision Insurance Starting Day 1! ● Life Insurance ● Paid Time Off ● Paid Holidays ● Parental Leave ● 401(k) Plan - 3% default contribution plus matching! ● Flexible Spending & Health Saving Accounts ● AD&D Insurance ● Disability Insurance ● Tuition Reimbursement Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law. Applicants are required to be eligible to lawfully work in the U.S. immediately; employer will not sponsor applicants for U.S. work authorization (e.g. H-1B visa) for this opportunity Veolia does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of Veolia, and no fee will be due. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

DPR Construction is seeking a Field Technology Engineer/Surveyor for our team in Richmond. Reporting to the Field Technology Lead and the SPW Business Unit Lead, the successful candidate will support the implementation of building control, laser scanning capture, and post-processing efforts across the Richmond Business Unit and the Northeast region. Responsibilities Support the overall Field Technology services across the Richmond business unit and designated projects Support existing conditions and as-built surveys for upcoming and current projects throughout the region. Support and/or perform initial surveying & field layout activities with robotic total stations to support field validation, quality control, and quality assurance. Perform construction building layout with robotic total stations to support field validation, quality control, and quality assurance. Plan and execute field survey activities in accordance with standards set by the project team. Plan and perform layout set out and back-check tasks. Leverage appropriate set up procedures using a robotic total station including known backsight and multi-point resections. Perform benchmark transfers using an auto level. Proficient with allocating and scheduling job duties to others. Ensure all labor, equipment, and materials are organized and equipment firmware is up to date. Support/Perform sUAS and 360 Photo capture and post processing activities. Assist with reality capture services utilizing terrestrial laser scanning and sUAS/photogrammetry tools to capture, process, and document existing and as-built conditions of interior and exterior spaces. Support project teams and VDC engineers on the utilization and analysis of reality capture deliverables (point clouds, meshes, 360 photos, etc.). Basic Qualifications We are looking for a flexible, detail-oriented individual that will relish performing in a fast-paced, team-oriented environment, with ability to multi-task, produce quality deliverables, and meet project-based deadlines. The successful candidate will have: Ability to work in an environment that requires transparency, team collaboration, leading by influencing, and socialization of initiatives. Position requires lifting and carrying moderately heavy equipment (25lbs+), climbing ladders and occasionally scanning crawl spaces and enclosed ceilings. Flexible hours: Commercial building scans can start at 6AM and occasionally require weekend work. Minimum 1-3 years of hands-on construction experience in the AEC industry. Able to read and understand construction documents, shop drawings and plans. Knowledge in robotic total station and 2+ years of RTS usage, Leica Captivate experience is a plus. Knowledge in Autodesk Point Layout, AutoCAD and/or Civil 3D. Basic to Intermediate level software knowledge in Autodesk packages (e.g. Revit, Navisworks, BIM 360 etc.) DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

:** Crown Equipment Corporation, one of the world's largest lift truck manufacturers, offers local support on a global scale with more than 15 manufacturing facilities worldwide and more than 500 retail locations in over 80 countries. Our global sales and service network provides our customers with a local resource for a wide variety of quality material handling equipment, fleet management solutions, warehouse products and support services to meet their needs anytime, anywhere. At Crown, we know that our employees are the driving force behind our success in the material handling industry. We cultivate a culture of passionate people and inspired innovation. We support our employees and their professional goals because an investment in our people is an investment in our future. In fact, throughout Crown's history, more than 1,000 employees have reached a 25-year milestone, and we are proud to have traveled their career paths with them. From employee training and development to competitive compensation packages, we invest in our employees, knowing that people are always at the core of what moves us forward. We are seeking knowledgeable customer focused auto, diesel, aircraft, or forklift technicians to join the Crown team. Want to Learn More? Watch A Day in the Life of a Crown Field Service Technician! click here (****************************** _._ **Job Posting External** **Job Duties** + Troubleshoot, diagnose and repair Crown and all other makes of lift trucks. + Perform all assigned planned maintenance on customer lift trucks. + Maintain a service van and its inventory. + Process paperwork after completion of each job. **Minimum Qualifications** + Less than 2 years related experience + High school diploma or equivalent + Valid driver's license, good driving record, and ability to safely operate lift trucks. **Preferred Qualifications** + Good mechanical and electrical aptitudes, knowledge of electrical/electronic systems and hydraulics and internal combustion engines, and the ability to read and understand electrical and hydraulic schematics. + Good written/verbal communication and customer care skills. + Technical degree, previous lift truck repair, welding experience, and knowledge of various types of testing equipment preferred. + Familiar with tools and equipment such as common hand tools, electrical/air tools, torch, arc welder and various types of testing equipment. + Industry related training is preferred + Ability to read and understand service manuals, plan, and follow-through **Work Authorization:** Crown will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas or who need sponsorship for work authorization now or in the future, are not eligible for hire. No agency calls please. **Compensation and Benefits:** Crown offers an excellent wage and benefits package for full-time employees including Health/Dental/Vision/Prescription Drug Plan, Flexible Benefits Plan, 401K Retirement Savings Plan, Life and Disability Benefits, Paid Parental Leave, Paid Holidays, Paid Vacation, Tuition Reimbursement, and much more. Crown also offers Service Technicians: + Award-Winning Service TrainingCompany Vehicle for Field Service TechniciansTool InsuranceNo Flat Rate40 Hours Per Week plus OvertimeUniformsSpecialty ToolsPrimarily 1st ShiftCareer Advancement Opportunities EOE Veterans/Disabilities

You are... a logical thinker skilled in troubleshooting, enthusiastic about working with complex technologies, and a professional, committed to customer satisfaction. As a Field Service Representative and key member of the Eastern Region service team, you provide on-site service including preventive maintenance, calibration, installation, and training across all product lines primarily in the Mid-Atlantic region. You will report to the Eastern Region Service Manager in Ashland, VA. Your location is ideally near Richmond, VA, but other major cities in the territory are possible. The base salary range for this position is $31.65-$35.80 per hour and depends on technical and service experience within the analytical instrumentation field. Anton Paar USA offers full benefits and a profit-sharing contribution to your 401k retirement savings. We offer a $10,000 anniversary bonus every five years, plus additional bonus opportunities. We are ... focused on selling and supporting Anton Paar's range of high-precision measuring instruments for physical, chemical, mechanical, and structural properties. A highly diverse, dynamic, and financially sound company, we have grown every year since our start in 1986. Our exceptionally high investment in R&D fuels industry-leading solutions throughout a vast range of the industrial and academic landscape, impacting nearly every product you use in daily life. Anton Paar USA is a for-profit sales and service organization in the Anton Paar Group, privately owned by the charitable Santner Foundation with its headquarters in Graz, Austria. Job Description * Preventive maintenance, troubleshooting, repair, and calibration of instruments at customer sites within the assigned region. * Managing inventory, trip planning, and administrative tasks related to service functions. Qualifications * 3 years experience in troubleshooting, repairing and maintaining complex analytical instruments. * Ability to work independently and a strong commitment to customer satisfaction. * Ability to work with electronic schematics, test equipment, and repair tools * Associate's degree in engineering or related technical field. * Availability for frequent overnight travel (total travel up to 90%). * Valid driver's license with clean driving record and passport. Additional Information Life at Anton Paar is more than just work, with an employee-led In Motion Program organizing active social events during and outside working hours. We also offer unique and rewarding positions with competitive salaries, an award-winning benefits package, and opportunities for professional growth. We provide a drug free workplace and require pre-employment drug tests. Anton Paar USA, Inc. considers all qualified candidates for this position. This position is not eligible for current or future work authorization or visa sponsorship. #LI-KJ1

Job Description Field Service Technician Opportunity At Auxo Medical, our team members have an immediate and long-term positive impact on our customers, our organization and our community. As a leading supplier of capital medical equipment and services, we are committed to providing innovative solutions that foster safer and cleaner environments throughout the healthcare spectrum. We are a vibrant and growing company and are currently looking for an experienced Field Service Technician. If you're mechanically inclined, enjoy working on state-of-the-art machinery, like the challenge of understanding how things work and troubleshooting issues when they don't, then we'd like to talk to you! As someone who works equally well in both a team setting and independently, you'll be making a difference every day by solving complex problems in a fast-paced environment while making lasting positive relationships across the customer organization. What We Offer You This is a great opportunity to join a well-established and rapidly expanding, company! We provide a solid, stable and enjoyable workplace, where no two days are ever the same. We believe in providing our team members with a professional setting that sustains long-term career growth. And we back it up with one of the most comprehensive benefits packages in the industry, including: Competitive pay with merit increases Uniform shirts provided Mileage reimbursement Medical, Dental and Vision Insurance Paid holidays including Birthdays 401(k) plan Advanced Training Paid Time Off (PTO) Opportunities for advancement Fun, supportive, professional workplace What We Are Looking For Our hiring standards, like virtually all other aspects of our company, are industry leading. Simply put, we are looking for the brightest and the best. As an Auxo Medical Field Service Technician, you'll ensure superior customer service at every level. This is a field-based position where you will be traveling to hospital and surgical facilities to maintain, troubleshoot, service and provide calibration and installation support, as needed, across a variety of machinery including sterilizers, washers, ultrasonic and related equipment. While conducting this work, you will be responsible for building positive relationships and enhancing the Auxo brand across the customer base. Specific skills and experience we require for this position include: Associates Degree in electronics, mechanics or similar discipline or technical training certification in mechanical, electrical or industrial maintenance from an accredited vocational school High school diploma with 3 years of experience 1 year (minimum) experience in plumbing, electrical, HVAC, industrial maintenance or similar field service repair and maintenance. Background in large military/agricultural equipment, appliances, vehicles or automated assembly-line cell maintenance will also be considered Strong technical, organizational and problem-solving skills are mandatory Excellent verbal and written communication skills Ability to read and utilize schematics, diagrams and technical manuals Experience using a computer tablet and/or pc Understanding of computer programs and applications (ie, Microsoft Office, Salesforce, etc.) Superior customer relations skills Able to adapt seamlessly to multiple, changing priorities Ability to operate in a hospital/ambulatory setting that requires sterile uniform use (provided) while working Can work independently as needed Willing to work flexible hours when required (outside normal business hours) Valid driver's license and dependable personal transportation required Bonus points if you have: Experience maintaining/repairing Steris, Getinge, Belimed or similar medical equipment Background in steam fitting Commercial plumbing, HVAC or electrical apprenticeship experience Physical Working Conditions Position requires lifting up to 75 lbs, bending, squatting, sitting, standing and twisting. Ability to spend extended amounts of time in a vehicle. Trainees will assist experienced technicians at customer sites that include (but are not limited to); hospitals, operating rooms, laboratories, surgery-centers, pharmaceutical production facilities, universities and research centers. Flexible scheduling may be required to accommodate customer needs. About Auxo Medical Auxo Medical, LLC, provides medical equipment and services to ambulatory surgical centers, hospitals, laboratories, private physician practices and more. We have the expertise to provide the exact equipment needed to meet virtually every circumstance, the reliability to build trusted, long-lasting partnerships and the responsiveness required in today's fast-paced environment. We invite you to visit our website, ******************** to learn more.

Integrated Resources, Inc is a premier staffing firm recognized as one of the tri-states most well-respected professional specialty firms. IRI has built its reputation on excellent service and integrity since its inception in 1996. Our mission centers on delivering only the best quality talent, the first time and every time. We provide quality resources in four specialty areas: Information Technology (IT), Clinical Research, Rehabilitation Therapy and Nursing. Job Description Must have 3-5 year's experience repairing CT and MRI machines. Must also have good communication skills as they will be interfacing directly with the customers Worker will travel around the Richmond VA area to different hospitals servicing the GE equipment Additional Information We do have referral bonus of $500 per candidate, if you refer any of your friends or colleague who are looking out for the same job. Kind Regards Imran Khan Technical Recruiter Integrated Resources, Inc. IT Life Sciences Allied Healthcare CRO Certified MBE |GSA - Schedule 66 I GSA - Schedule 621IDIRECT # 732-844-8732 LinkedIn: https://www.linkedin.com/?trk=nav_logo Gold Seal JCAHO Certified ™ for Health Care Staffing “INC 5000's FASTESTGROWING, PRIVATELY HELD COMPANIES” (8th Year in a Row)

Job DescriptionPennant Solutions Group is looking for a motivated Field Service Installer in Glen Allen VA. Responsible for the physical installation of land mobile radio and other telecommunications equipment at a variety of customer sites, including commercial and government buildings, as well as outdoor telecom shelters. Key Responsibilities: Install networking, server, workstation, and ancillary hardware for commercial and government radio systems, E911 technologies, and related telecom solutions Mount indoor and outdoor antennas on various structures Pull and route data and coaxial cables throughout buildings and other environments Terminate cabling using appropriate connectors Test antenna and cable installations to ensure compliance with performance standards Maintain inventory of tools, equipment, and parts in the installation vehicle Adhere to OSHA safety regulations and relevant industry standards Perform additional related duties as assigned Qualifications: Skilled in the use of hand and power tools Familiarity with cable testing and diagnostic equipment Strong attention to detail and effective communication skills Excellent analytical and troubleshooting abilities Education & Experience: High school diploma or equivalent required Experience in building, mechanical, or industrial trades preferred Physical Requirements: Ability to climb, work at heights, bend, pull, reach overhead, and stand or walk for extended periods Must be able to lift up to 50 lbs and pull cables through varied cable paths

Join a USA Today Top Workplace! Morris Group, Inc., one of the largest machine tool distribution networks in North America, is a third generation, family owned and operated business that serves manufactures of precision machined parts in the United States. Our mission is to help manufacturers maintain a competitive advantage in the world economy by improving productivity. Morris South is a division of Morris Group, Inc. We supply CNC machine tools, tooling, accessories, software, automation, and more to manufacturers of precision machined parts. Our customer base is located in the southeast U.S. We serve manufacturers in Alabama, Arkansas, Georgia, Mississippi, North Carolina, South Carolina, Tennessee, and Virginia. Our mission is to help manufacturers from all industry sectors achieve and maintain a competitive advantage by improving productivity. We help you make better parts, less expensively. Summary of Responsibility: The Field Service Technician is responsible for the installation, repair and maintenance of machine tool equipment, controls (Fanuc, Siemens, etc.) and other components purchased by customers. This position works independently to ensure the highest level of quality and customer service satisfaction. What You Will Contribute: Traveling to customer sites to install, troubleshoot, repair and maintain all machine tool equipment and controls for customer organizations Utilizing machine tool manuals, technical documents, internal and vendor resources to research machine issues Ensuring proper documentation is completed and submitted to office and customer in regards to status of machine issues, repairs, and installation Promoting and performing preventative maintenance on customer machine tool equipment and conducting after-sales technical support and training Possessing and maintaining an in-depth knowledge of machine tool industry and product lines represented by the company Other Function Perform related duties as required The duties listed above are intended only as an illustration of the various types of work that may be performed. The omission of specific statements of duties does not exclude them from the position if the work is similar or a logical assignment to the position. Qualifications & Competencies: Five years' experience with CNC machine repair Experience with Microsoft Office Suite and other business programs as required Ability to read and interpret drawings and schematics is required Excellent technical, communication, and presentation skills are necessary Must be able to meet the physical requirements of the job including flexible hours and frequent travel and driving throughout a regional territory What's in it for You: We take great pride in our employees and offer a variety of benefits that allow our employees to be successful inside and outside of work: • Competitive starting salary • Market competitive comprehensive health benefits including a zero premium medical plan offering, vision, dental, and company paid life insurance • 3+ Weeks' Vacation to Start • 10 Company Paid Holidays • 401(k) retirement plan with company contribution • Tuition reimbursement • Employee appreciation events and perks • Employee Assistance Program Mental and physical requirements: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of the job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. • Must be highly mobile, able to access all areas of the premises. • Ability to concentrate and remain focused while prioritizing multiple tasks, responsibilities, and projects. • Ability to sit for prolonged period of times. • Able to perform bending, twisting, stooping, reaching, and lifting of moderate to heavyweight material up to 50 lbs. with assistance from equipment or other employees. • Ability to frequently use hands and arms. • Vision abilities required by the job include close vision, distance vision, peripheral vision, depth perception and the ability to adjust focus. • Ability to keep their composure with the public and co-workers in everyday, stressful situations. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, protected veteran status or other characteristics protected by law. Requisition #1524B, Petersburg VA

Job Description Are you an experienced Field Technician and looking for a new opportunity? Schedule: Monday - Friday 6am - Until Work Complete and weekends Pay Rate: $18 $19/hr Equipment needed: Hard Hat, Safety Glasses, Work Gloves and Steel Toe Boots Essential Job Responsibilities Include: Must be bilingual (English and Spanish) Perform equipment decontamination, confined space entries, soil remediation work, underground storage tank cleaning and removal, and sample collection. Be on-call as needed for project work. Ability to perform work inside areas of varying dimensions, involving squatting and crawling for possible extended periods. Assist Supervisor and leads as requested. Due to the diversity of both scheduled and non-scheduled projects, physical demands and environmental conditions vary significantly depending on the project. May work in environments that are extreme in nature, like environmental conditions such as heat, cold, heights, hazardous chemicals, loud noises, dangerous equipment, long hours, etc. Requirements and Qualifications: English and Spanish High School Diploma or GED (or equivalent reading, writing, and reasoning skills) Experience in emergency response, manual labor, general construction, and/or industrial cleaning is preferred. Must be able to work outdoors on various terrain in a wide range of weather conditions. Valid driver's license. SPECIAL REQUIREMENTS: May be exposed to varying levels of physical activities and physical extremes such as long periods of standing, walking, crouching use of hands, and heavy lifting of up to 50 pounds or more

Carter Machinery Company, the authorized Caterpillar dealer serving Virginia, West Virginia, Maryland, Delaware and Washington D.C. is hiring a Temporary Service Technician in Richmond, Virginia. The Temporary Service Technician, under the direction of the senior technicians, is responsible for assisting with repairs to equipment. Seeking candidates with a high school diploma or equivalent; Completion of a Mechanical Votech program, preferred. Requirements for the Temporary Service Technician position include: Self-starter able to work with limited supervision. Strong mechanical aptitude and excellent troubleshooting skills Proficient in the use of a computer, Microsoft Office products and service software required in position; able to complete service reports and provide pertinent details for work orders. Strong written and verbal communication skills; able to write service reports that accurately document diagnosis and repairs performed. Must prepare required documentation including work orders, parts lists, and time cards in an accurate and timely manner. Able to read and understand operating manuals. Promote a positive customer experience. Uphold the Core Values of Integrity, Commitment, Excellence and Teamwork by embracing The Carter Way. Physical requirements must be met for the Temporary Serviced Technician job, including the ability sit or stand for prolonged periods of time. Able to lift, carry and maneuver items up to 70 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. This job description is not intended to be all-inclusive. Additional duties may be assigned. Carter Machinery Co. Inc. is an EEO/AA Employer. All qualified individuals - including minorities, females, veterans, and individuals with disabilities, or any other characteristic protected by law - are encouraged to apply. Carter Machinery is a drug-free workplace. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.