Engineering Technician jobs at Hormel Foods - 5209 jobs

PRIMARY RESPONSIBILITIES: First point of contact for chassis line issues Maintain and complete assigned QIRP action items Review work and complete tasks assigned in PLM Follow all safety policies, rules and procedures Responsible for production processes and necessary tooling/equipment to produce high quality product with high operator efficiency Provide required personal hand tools KNOWLEDGE, SKILLS AND ABILITIES: Overall knowledge of bus body/chassis construction; departmental tools/equipment Technical ability to work from rough sketches or mark prints Able to adjust quality level to job at hand Knowledgeable of all tools and equipment in department Print reading/comprehension, MS Office, PLM, LN, BBOND, BOSS Ability to weld (tig, arc, mig) in order to fabricate assembly fixtures, tools and jigs Ability to work on several jobs at once EDUCATION AND/OR TRAINING: * See knowledge, skills and abilities WORKING CONDITIONS: Team Worker and able to direct others Communicate with own and other departments (read, write, verbal) Overtime work required as needed Able to do physical work (normal lifting/carrying, bending and climbing) PERFORMANCE CRITERIA: Must meet established quality and maintenance standards Maintain a positive, even-tempered attitude Wear required personal protective equipment (PPE) Must meet established attendance policy and work overtime when required Must perform other duties and tasks as assigned by supervisor

AOSense, Inc. is the leading developer and manufacturer of innovative quantum technologies employing atom optics. Our products use frequency-stabilized lasers and atoms in a vacuum cell to measure accelerations, rotations, magnetic fields, and time with unparalleled accuracy and stability. Our staff includes physicists, engineers, and technicians with expertise covering a wide array of disciplines. Our teams are dynamic and fast paced since our hardware is cutting edge. POSITION SUMMARY: We are seeking an R&D technician who specializes in precision assembly and testing. As a hands-on R&D Technician at AOSense, you will work with physicists and engineers to build and test high-performance, fieldable accelerometers, gyroscopes, gravimeters, atomic clocks, frequency standards, and magnetometers, as well as component technologies that we sell commercially to the R&D community. RESPONSIBILITIES: Collaborate with physicists and engineers to assemble and test complex quantum sensor and atomic clock hardware Procure and track inventories of mechanical, optical, vacuum, and electrical components Coordinate component and subsystem fabrication, assembly, and test Assemble precision mechanical systems Align lasers through optical systems Procure and maintain laboratory equipment and supplies Collaborate with engineers to define and implement test plans Bake out and leak test vacuum systems Document and report results of validation testing Requirements Demonstrated success in precision mechanical assembly of prototypes and products Enthusiasm for developing expertise in new fabrication disciplines Proven organizational skills and attention to detail Hands-on experience with test equipment Excellent troubleshooting skills Applicants should thrive in a dynamic environment U.S. Government contracts require applicants to be U.S. citizens or permanent residents DESIRED EXPERIENCE: Expertise aligning and securing micro-optical components Hands-on experience with vacuum system assembly and testing Adept in glovebox assembly work Sensitivity to cleanliness requirements of vacuum and optical assemblies Skilled in mechanical prototyping, including basic machining and finishing operations Practical experience with advanced bonding methods, including soldering, brazing, and adhesives Proficiency with SolidWorks mechanical design software Familiarity with electronics prototyping, including reading schematics, PCB fabrication, assembly, soldering, and rework Experience testing low-noise analog, mixed-signal, and rf electronics Basic knowledge of data acquisition and analysis software such as LabVIEW, MATLAB, and Python EDUCATION AND EXPERIENCE: Associate degree in a relevant technical field or equivalent professional experience, with experience in an R&D environment Benefits Salary depends on qualifications and experience Medical and dental Retirement Stock plan AOSense is an equal opportunity employer (EOE) and considers qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, protected veteran or disability status, or any other federal, state or local protected class. AOSense is committed to providing equal employment opportunity to qualified individuals with disabilities. If you are disabled and require special assistance or a reasonable accommodation while seeking employment with AOSense, then please contact us via email at ******************* or call ************** x210

What We Offer: At Magna, you can expect an engaging and dynamic environment where you can help to develop industry-leading automotive technologies. We invest in our employees, providing them with the support and resources they need to succeed. As a member of our global team, you can expect exciting, varied responsibilities as well as a wide range of development prospects. Because we believe that your career path should be as unique as you are. Group Summary: Cosma provides a comprehensive range of body, chassis and engineering solutions to global customers. Through our robust product engineering, outstanding tooling capabilities and diverse process expertise, we continue to bring lightweight and innovative products to market. Position Overview: Supports manufacturing by improving department efficiency in a safe, high quality and productive manner, and is accountable for quality and housekeeping goals by following through on issues from start to finish and ensure the corrective action is in place. The incumbent is responsible for a variety of tasks which ensure the efficiency and reliability of all Company tooling or production equipment and processes REQUIREMENTS: Minimum of 3 years of Fanuc robotics production support using a FANUC teach pendant Robotic MIG, spot, and material handling experience preferred. Fronius and BOSCH robotic welding background preferred. Knowledge and ability to use a voltage meter. Background with robotic dress packs preferred. Background in troubleshooting welding issues with a robotic MIG welder. Background in troubleshooting welding issues with a robotic SPOT welder. Experience with robotic adhesive and sealer programming preferred. Background in projection welding preferred. Background in stud welding preferred. Able to demonstrate understanding of how job performance affects product quality and customer satisfaction Experience on the cut & etch processes an asset. Must have experience in, and practices the 5S methodology Proven ability to interact well with co-workers and promote the “Team” attitude. Ability to understand, anticipate and follow direction while exercising maturity of judgement. Ability to work well in a fast-paced environment and with a variable workload Ability to work flexible hours and overtime in a fast-paced environment in order to meet customer requirements Able to effectively present information and respond to questions from all interested parties Able to calculate figures and amounts, such as percentages and proportions Able to maintain confidentiality and use discretion and tact Time management skills to include prioritizing and meeting deadlines with limited direct supervision Capable in necessary computer use and computer software to perform job DUTIES: Service, maintain, repair, install and test new or existing equipment and verify conformance to specifications. (Robot/Welding/Fixtures) Complete repairs, modifications and installations as required. Provide plant support in troubleshooting of process problems including root cause and completes quality improvements as required to maintain part standards of quality. Establish cross functional team for reliability issues Deal extensively with production team and other support groups as well as vendors (both parts suppliers and equipment suppliers). Department support for testing, repairing and calibrating electric or electronic components. Validates reliability issues with components and investigates repeat component failures. Enter all breakdown details into the Maintenance PM database by end of shift Carries out preventative maintenance procedures as laid out by CBAM and the manufacturer's specifications. Contribute to continuous improvement and cost reduction activities; repairs and systems improvements (optimization). Documents improvements and analysis data, ensure swift and effective implementation. Analyze, record and chart documentation required for maintenance records and projects. Establishes benchmarks and shares improvement opportunities with department Shift Leader. Establish and follow-up full project implementation including timing, concept, feasibility, design, specifications, construction and commissioning. Prepare drawings, material specifications to requisition as required by vendors or other departments. Assist in developing and maintaining preventative/predictive maintenance procedures. Support or conduct training for and implementation of cross-functional repairs to equipment that includes electrical, mechanical, tooling etc. provided that it can be done safely. Takes part in the continuous improvement process to improve productivity and quality (provides suggestions at team meetings, understands losses and gives ideas/solutions, participates in trials/experiments, volunteers on committee or focus group activities, etc.) and focuses on solutions. Attends departmental and plant-wide communication meetings as scheduled. Attends training as scheduled. Complies with, supports and models CBAM's operational procedures/policies, Employee Handbook, and Magna's Employee's Charter, Corporate Constitution, and Operational Principles. Complies with relevant Quality, Health, Safety and Environmental programs (e.g. ISO 9001/IATF 16949, ISO 45001 ISO 14001). Complies with all Health and Safety programs in accordance with OSHA. Follows and ensures Company procedures regarding safety rules and regulations are followed. Conducts themselves in a professional manner. Keeps work area clean and organized. Other duties as required. EQUIPMENT and/or PRODUCT FAMILIARITY: Computer, measuring instruments, communication devices, forklifts, aerial lifts SITE BENEFITS: Health Insurance / Dental Insurance / Vision Insurance Basic Life Insurance Basic AD&D Insurance Paid Vacation & Holidays Paid Holidays Tuition Reimbursement 401K Profit Sharing Employee Referral Program Various Employee Events

Responsible for managing the activities of creating, innovating, designing, testing, and overall engineering support of custom design and existing products. Scope of this role spans multiple product categories and engineering disciplines, including mechanical, electrical, software, motorization, and test engineering. Leading the strategic development of processes and tools to drive efficiency, manage work activities and schedules, quantify and manage risk, and coordinate product support and implement process improvement is a critical function for this position. Effective cross functional collaboration and communication are essential to drive meaningful growth and continuous improvement. The role will focus on taking customer's custom solutions and qualifying them into full scale manufacturing stock products. The role will manage multiple projects at one time. We are looking for a leader that's comfortable being on the floor and leading a team. Job Responsibilities Custom and Existing Product Support - 70% Supervise a team of engineers and technicians to support existing products, ECOs, and ECNs. Oversee project prioritization and the execution of engineering tasks for custom solutions, coordinating with Project Managers and the Procurement team to manage risks, materials, and delivery schedules. Collaborate with cross-functional teams (Manufacturing, Quality, Supply Chain, Product Management, etc.) to support product lifecycle management. Support the qualification and integration of alternate materials, components, and suppliers. Provide innovative and experienced leadership for multi-discipline team, including mechanical engineering, electrical engineering, and test engineering functions. Ensure Stage-Gate and Technical Review (TR) processes are strictly followed while looking for Continuous Improvement opportunities. Drive continuous improvements to productivity, quality and organizational efficiency. Comfortable being on the floor 5 Direct Reports Department Leadership - 30% Promote a collaborative and highly engaged team environment while serving as an inspirational leader, coach and mentor to the Engineering team. Leads and coordinates engineering activities and defines, establishes, and assigns priorities and resources for projects in accordance with business strategies and goals. Prepares and issues required reports, summaries, and presentations related to engineering activities. Represents the company in industrial / technical organizations. Requirements Bachelor's Degree in Engineering. Master's Degree preferred. 8+ years of experience with product development in a high production environment. 3+ years of people management experience including leading teams through change. Consumer goods/consumer durables manufacturing experience is required. Customized product experience Required.

We are seeking a skilled Automation Technician to join our team. This is a challenging and rewarding position that offers opportunities for growth and development. If you are a motivated individual with a passion for automation technology, we encourage you to apply for this position. Join our team and contribute to the success of our organization. SUMMARY: Support operations in the design, build, implementation, and maintenance of custom-built equipment and processes under the direction of the Manufacturing Engineer, mainly utilizing Automation Direct's PLC and software. Develop innovative and creative approaches for improvement in safety, quality, and productivity in processes and equipment. Occasional travel may be necessary. ESSENTIAL FUNCTIONS: Must be capable of following and meeting standard work requirements. Must be able to use computer programs to assist in recording data, making labels, obtaining prints and specifications, etc. Lead projects to improve equipment within the facility. Be able to continue to pursue future designs that will help Parker HPD move forward in leading-edge technology Troubleshoot equipment or PLC issues. Able to foster professionalism with all associates in order to obtain feedback and ideas to incorporate into improvements for the facility. Aide in the development of apprentices. DEPARTMENT SPECIFIC FUNCTIONS: Specify and order any materials required to create any approved project and document the final designs. This documentation must include items such as: blueprints, bill of materials, preventative maintenance standard work, etc. as required for continued support of the equipment Develop a spare parts stock strategy to organize and correctly account for that inventory and usage Develop safety practices that improve working conditions on equipment as needed and beyond OEM standards to ensure a safe Parker work environment in HPD plants Schedule equipment repairs or implementation with production control department. Other duties may be assigned at a later time Work safely in accordance with regulations, standards, and procedures in a manner that eliminates risk to health and the environment. Notify leadership of unsafe conditions or practices unlawful activities and activities that present unreasonable health and/or environmental risk. Report all safety and/or environmental incidents to leadership immediately. Participate in peer-based teams (i.e., Cross Functional Teams), and work with groups to initiate and implement programs such as Lean Manufacturing, 5S, and Total Productive Maintenance. QUALIFICATIONS: Education: High School diploma or GED Certified electrician preferred 2 years of trade school education preferred Desired 4 years of trade school education or certificate Experience: 5 years in a Manufacturing Environment Required Skills Good verbal and interpersonal communication skills Good math, reading and writing skills Proficient with Microsoft Office. Experience with Automation Direct's Productivity Suite Capable of wiring PLC and related components. Have working knowledge and understanding of pneumatic systems, hydraulic systems, and electrical equipment (systems up to 480 volts). Creative and out of the box thinker to visualize and construct equipment and/or make modifications that will improve safety and productivity for our processes and people. Preferred Skills 1. Experience with Codesys programming software. 2. Capable of writing training instructions, Standard Work instructions, and repair records. 3. Have working knowledge of the maintenance and functionality of various types of manufacturing equipment. 4. Have working knowledge and understanding of pneumatic systems, hydraulic systems, electrical equipment (systems up to 480 volts). 5. Strong programming knowledge in PLC's and HMI's. ORGANIZATIONAL RELATIONSHIPS/ SCOPE: Report directly to Manufacturing Engineer Work closely with other departments to resolve issues with the processes & equipment. Communicate with incoming shift of issues and needs. WORKING CONDITIONS: Work in areas where safety equipment will be required (steel toe shoes, eye protection, hearing protection) Standing is required for extended periods of time. Walking, pushing, pulling, reaching, bending, turning, twisting, squatting, and lifting is performed regularly Air-conditioned facility The employee may be required to follow other job-related instructions and to perform other job-related duties as requested, subject to all applicable state and federal laws. DISCLAIMER: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties, and skills required of employees assigned to this position. EQUAL EMPLOYMENT OPPORTUNITY: Parker is an Equal Opportunity and Affirmative Action Employer, committed to ensuring equal employment opportunities for all job applicants and employees. Employment decisions are based upon job related reasons regardless of race, ethnicity, color, religion, sex, sexual orientation, age, national origin, disability, gender identity, genetic information, veteran status, or any other status protected by law. However, U.S. Citizenship, Permanent Residency, or other appropriate status is required for certain positions, in accord with U.S. import & export regulations. DRUG-FREE WORKPLACE: In accordance with Parker's policies and applicable state laws, Parker provides for a drug-free workplace. Therefore, all applicants seeking employment with Parker will be subject to drug testing as a condition of employment.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, Mxico y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fbricas funcionen mejor. Principal Duties/Responsibilities: Performs expert level break-fix & preventive maintenance, and/or design of mechanical, and electrical equipment improvements as well as complex systems as the employees job specialty requires. Provides troubleshooting support on equipment and technical support on production lines as appropriate for the employees job specialty. Maintains in-depth technical knowledge of numerous systems as the employees job specialty requires. Performs research and procedures as the employees job specialty requires. Programs, troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. Utilizes predictive equipment and interprets results for analysis, equipment condition assessment, troubleshooting and proactive maintenance. Including but not limited to infrared thermography, ultrasonic testing, power quality analysis, laser interferometry, ball bar, and vibration analysis. Leads, drives and participates in CI activities--processes, results and cost savings using CI tools and methodology. Identifies and sources parts, supplies and repair items as necessary. Suggests alternative items and engineered solutions to improve reliability. Independently performs maintenance as per industry standards. Complies with 5S and housekeeping standards. May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. Studies and investigates technical and systems methods, tools, and innovations that can be implemented in ATS sites to improve maintenance practices and updates documentation. Prepares input for cost analysis for new equipment, repair/rebuild proposals, cost savings and innovations as required. Updates records and reviews CMMS history and analyzes data. Provides technical contents of sales quotations and performs T&M duties as required. Trains and coaches less proficient technician. Assumes project manager responsibilities as assigned. Completes and conducts on-the-job training and technical self-study programs for career development. Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities, & Behaviors Required: High School Graduate or equivalent (GED). Associates degree with a Technical focus and 7 years of related experience in specific industry; or, 10 years of experience in specific industry. Proficiency in predictive technologies including vibration analysis or laser interferometer operations, precision alignments, and maintenance of applicable process equipment. Understands electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. Must be able to use hand tools and specialized tools as appropriate. May be required to travel. Six Sigma experience desired. Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS believes in fair and equitable pay. Please note that actual salaries may vary within the range, or be above or below the range, based on factors including, but not limited to, education, training, experience, professional achievement, business need, and location. We also offer market leading benefit programs including Medical, Dental and Vision plans, PTO, a 401k retirement plans with employer matching, tuition reimbursement, and more. Pay Range $36.78$47.03 USDATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religin, sexo (incluido el embarazo, identidad de gnero y orientacin sexual), origen nacional, discapacidad, estatus de veterano, informacin gentica u otro estatus legalmente protegido. Revisin de la poltica de privacidad aqu here.

For our state-of-the art 600+ person Lubbock, TX cheese and whey manufacturing facility, Leprino is seeking a Controls Technician. Leprino Foods broke ground on the $1 billion facility in the summer of 2022. The plant will become operational in 2025 with Phase 1 and will become fully operational by 2026! This position pays $39 per hour. There is an additional $1 differential for hours worked between 6pm and 6am. Weekly pay. Summary Description: The Industrial Electrical/Controls Technician provides plant-wide support for the selection, installation, programming, documentation, training and knowledge of plant industrial controls, including computer integration of PLC's, HMI's and process controls within the facility, training of end users on the operations of newly installed or modified process or control systems, and for standardization of control systems and control logic designs, documentation of operational procedures and as-built electrical drawings and logic. The Industrial electrical/Controls Technician is also the plant liaison for new system start up and commissioning by outside electrical and controls contractors and system integrators to ensure proper transfer of electrical red lines or updated electrical drawings and documented PLC programs changes and adequate training on the installation/changes that have been completed. The ICT is also responsible to keep control panels up to date and help rebuild when needed. The Electrical portion includes, designing, implementing electrical changes or additions to the electrical infrastructure. It is also the objective to oversee the contracted work to assure it is designed and installed per LFC guidelines. This position is also responsible to update the systems I/O list and create them if missing from the Document library. Job Duties (Accountability Categories and Essential Functions/Key Responsibilities): NOTE: The job may include other “non-essential” responsibilities and duties that are not listed on this form. Implementation of Control Systems Owns, drives, and has full accountability for designing and implementing new control systems and equipment on capital projects with the input from the engineering team. Oversees outside system integrators and controls contractors in their work within the facility. Ensures that all projects are documented, and information is available for use by all maintenance and production employees. Ensures work is accomplished in a safe and sanitary manner by directing employees and contractors and monitoring adherence to Company policies. Control System Maintenance & Inspection Has accountability for supporting server-based solutions and/or network infrastructure to maximize effectiveness of the plant's investment in shared computing resources, including effective deployment and utilization of servers (standalone and clustered), thin clients/terminal services, structured cabling, routers, switches, and network This more in the controls system side of our network. Asset-Center, Wonderware etc. Performs, provides details for, and inspects repairs to control and instrumentation systems to prevent downtime and ensure compliance with plant standards and governmental regulations. Determines necessary quantities of spare controls and instrumentation parts and supplies for all plant equipment. Ensure all Control systems, PLC and MCC have a current I/O List. Training and Documentation Ensures that appropriate training and documentation is available for use in proper training of Maintenance and Operations personnel. Coordinates, champions, and provides training and development for Maintenance Technicians to upgrade their controls skill levels. Accountable for maintaining appropriate records and files pertaining to plant maintenance activities to ensure availability of information regarding machine and facilities requirements. Problem-solving & Troubleshooting Acts as resource to production and maintenance teams, in problem solving and troubleshooting, operational activities to reduce downtime related to electrical and control problems. Integrates LEPRINO QUALITY into all aspects of the Allendale plant as evidenced by demonstrated continuous improvement, teamwork with co-workers, distinguished customer service and striving for excellence. Qualifications & Experience: Knowledge and Skills Knowledge of plant controls systems including PLCs and industrial automation software such as Wonderware. Proficient in the Microsoft Office Suite programs. Familiar with industrial operations, preferably dairy or food manufacturing. Effective oral and written communication skills. Excellent organizational skills. Creative thinker with a process improvement mindset. Demonstrated experience achieving high levels of customer service with cross-functional teams. Education and Experience Minimum of two-year electrical/electronic technical degree or five years demonstrated experience in industrial controls system development and troubleshooting. Or aptitude to go to classes to augment either. Strong knowledge of maintenance industry best practices. Practical experience leading loss control efforts in general industry. Offering you in return: A chance to be part of a global team of individuals passionate about producing and delivering high-quality products that help feed and nourish families around the world. Leprino Foods could not be where it is today without our incredible employees. That is why we share in our success together by rewarding you for your hard work. Hiring great people who are in it for the long run is our goal. Through competitive salaries, tuition assistance, vacation, holiday, dedicated sick time, matching 401(k), annual merit increases and bonuses, as well as our annual Profit-Sharing plan. Your impact will be noticed and rewarded, as you seek to further our company, our customers, and one another. Our Story: Leprino Foods' history dates back over 65 years, when Jim Leprino first started making small batches of mozzarella for local markets and eateries in the Little Italy neighborhood of Denver. We've grown a bit since then. Today, Leprino is the world's largest manufacturer of mozzarella and lactose, and a leading producer of whey protein. Still owned by Jim and the Leprino family, our sights are set to be the “World's Best Dairy Food and Ingredient Company.” To help us achieve that bold vision, we're looking for our secret ingredient: You. A motivated team member who is the best at what you do. Three people in a small corner grocery store in the early 1950s have now grown to over 4,300 employees throughout 16 global locations. Will you join us on our journey? Leprino Foods Company utilizes the services of Psychemedics to perform our Hair Follicle Drug Testing. Additional information about this process can be obtained at ******************** Leprino Foods Company supports a drug-free workplace and is an EEO/Affirmative Action Employer - M/F/Disability/Veteran Leprino Foods requires all individuals to wear the appropriate Personal Protection Equipment (PPE) as required by the role and location At Leprino, we believe in equal employment opportunity and make employment decisions based on each individual's unique talents, experience, skills, and knowledge; we do not discriminate on the basis of any personal characteristics. We know we are better together and are committed to creating an inclusive and supportive culture in which all employees can thrive. Nearest Major Market: Lubbock

Schedule: Full-Time, Onsite | Evening & Weekend Availability Required About the Role Our client, a major new attraction in Times Square, is seeking an AV/IT Technician (Junior Support Engineer) to join the Technology Operations team. This position plays a key role in supporting the attraction's dynamic technology infrastructure-including IT systems, AV and lighting equipment, networking, ticketing, and digital signage systems. The IT Technician will work closely with the Manager and VP of Technology Operations to ensure smooth, reliable performance of both internal and guest-facing technologies. This is an onsite, hands-on role that requires technical aptitude, attention to detail, and the ability to thrive in a fast-paced, high-profile environment. Key Responsibilities Technology Operations & System Maintenance Provide daily technical support for IT infrastructure, network connectivity, servers, and hardware systems. Troubleshoot and resolve software, hardware, and network issues to ensure minimal downtime. Maintain firewall security, remote access, VPN systems, and mobile device management. Perform system updates, upgrades, and backups to ensure stability and data integrity. Support building-wide internet operations and networking systems. Audio Visual (AV), Lighting & Digital Signage Support Oversee, maintain, and troubleshoot AV and lighting control systems throughout the building. Support immersive technology, projection, and digital signage installations. Manage and maintain radios, cameras, microphones, and other AV assets. Ensure proper operation of systems during guest hours and special events. Ticketing & Point of Sale (POS) Systems Provide onsite support for POS systems (4 stations and handheld devices) for the attraction. Maintain wireless ticketing systems and handheld ticket printers. Troubleshoot ticketing and admission system integrations to ensure a seamless guest experience. Coordinate with vendors to address technical escalations and performance issues. Collaboration & Reporting Work closely with the Manager and VP of Technology Operations to implement and optimize systems. Partner with external service providers to uphold high support standards and SLAs. Document all technical requests, incidents, and resolutions. Support the setup and shutdown of systems for daily operations. Qualifications Associate or Bachelor's degree in Information Technology, Computer Science, or related field preferred. Experience in attractions, entertainment, or hospitality environments is preferred. A+ Certification required; Network+, or other relevant certifications a plus. 4+ years of experience in IT support, AV systems, or a related technical role. Strong knowledge of networking concepts (routers, switches, firewalls). Hands-on experience supporting AV systems, digital signage, POS, or ticketing platforms. Understanding of IT security, system updates, and patch management. Excellent troubleshooting, organization, and documentation skills. Strong communication skills with the ability to explain technical issues clearly. Must be able to work flexible hours, including evenings, weekends, and holidays.

Job Title: Civil Engineering Technician - Water Duration: 6+ Month contract with possible extension Must be located within 50 miles within one of the listed BV offices below- Onsite 5 days/week Locations: Denver, CO; Phoenix, AZ; San Marcos, CA; Tualatin, OR The Virtual Design & Data Solutions (VDDS) Staff Engineering Technician under general supervision, performs advanced functions requiring technical knowledge and use of electronic applications, standards, and document control processes/procedures in support of creating or modifying deliverables. This role will be responsible for the development of site drainage, grading, and utility plans using Autodesk Civil 3D and Bentley MicroStation. This role will be within the Black & Veatch Governments & Water Utilities (G&Wu) group, supporting client needs related to water, wastewater, linear pipelines, and other water-related solutions. Required: AdvancedCivil 3D experience is required with use of pipe/pressure networks, proposed grading surfaces and plan and profile development. Must be familiar with plan & profile drawings, alignments, pipe networks and grading. Job Summary Functions in a project engineering technician capacity. Under general direction, supports engineering and design teams by developing and modifying technical deliverables. Applies foundational engineering principles and established design practices to create moderately complex design concepts and solutions. Utilizes digital tools and design software (e.g., CAD, BIM, 3D modeling) to create, modify, and maintain technical documentation, drawings, and project deliverables. Provides technical guidance and may offer direction to other engineering professionals and technicians to ensure quality and consistency across project outputs. Key Responsibilities Applies knowledge of standards, systems, document control, departmental guides, applicable codes and BV policies and procedures. May review project requirements and accurately determine the correct format and contents of the required deliverables. Proactively applies BV Quality Program to deliverables. Demonstrates personal accuracy and supports continuous improvement and change management efforts. Reviews design inputs in order to ensure consistency. Assists to ensure deliverables are in compliance with the specific codes and standards suitable for the project. May apply basic engineering principles and established design practices in developing moderately complex design concepts and deliverables. Begins to apply judgment and make decisions with respect to deliverables and input interpretation. Capable of handling difficult technical assignments within an area of expertise and can provide technical guidance to other professionals. Performs design calculations, detailed material quantities and estimates, and records. May review the deliverables of others. May define work assignments and maintain schedules. May program control systems or participate in other plant start-up activities associated with a specialized area of expertise. Coordinates with other design group personnel to review and exchange project information necessary for design development. May support field activities. Focuses on the needs of internal clients while utilizing an understanding of external client's main interests and drivers. Proactively seeks and shares knowledge of latest technologies and processes . May apply judgment and makes decisions with respect to deliverables and input interpretation. Required Skills: Advanced Autodesk Civil3D is required with use of pipe/pressure networks, proposed grading surfaces and plan and profile development. Must be familiar with plan & profile drawings, alignments, pipe networks and grading. Typically a minimum of 5 years related work experience. Technical Skills: Autodesk Civil 3D Autodesk AutoCAD Bluebeam Experience in the appropriate electronic applications and programs required for performing assignments to include but not limited to CADD or other electronic applications. Advanced ability to interpret engineering deliverable content as assigned. Basic knowledge of engineering standards, systems, document control, departmental guides and B&V policies and procedures. Basic industry knowledge and technology trends. Basic knowledge of company quality program. Basic knowledge of other disciplines. Basic knowledge of construction & constructability practices & principles. Basic knowledge of engineering design principles and applicable design guides related to assigned engineering discipline.

Benefits: 401(k) 401(k) matching Dental insurance Health insurance Paid time off Vision insurance Critical success factors - The critical success factors for a Facilities and Equipment Maintenance Technician to excel in this position include: 1. Safety conscious for self and co-workers 2. Excellent verbal and written communication skills 3. Ability to compile, write and present production documents 4. Computer literate, especially Excel and Word 5. Aptitude with set-up, repair and ongoing maintenance of electro-mechanical equipment An Equipment Maintenance Technician must possess and be able to apply electrical and mechanical knowledge, shop mathematics, metal properties, layout and machining procedures in our R&D and manufacturing environment. Essential Job Functions - The Facilities and Equipment Maintenance Technician will be responsible for executing tasks defined by management. Such tasks may include: • Set up and operate a variety of machine tools to produce precision parts and instruments • Fabricate, modify, or repair mechanical instruments • Fabricate and modify parts to make or repair machine tools or maintain industrial machines • Ensure optimal functioning of processes and equipment • Perform new machine installations as required • Perform and document regular equipment maintenance Education: Bachelor or Associate degree in engineering or other science/technology field is desired. High school diploma with relevant experience may be considered. Experience: At least 5 years of experience and proven ability in safely performing electrical and mechanical repairs and/or installations of various types of equipment and machinery is required. Familiarity with vacuum pumps and high temperature furnaces and hot presses for ceramic processing is highly desired. Knowledge: Well-balanced technical background is desired. Detailed knowledge of a wide variety of equipment and machining processes is desired. Essential Physical Requirements: Ability to safely operate high temperature equipment. Some heavy lifting required. Special Requirements: US citizenship is required.

Job Title: Civil Engineering Technician - Water Duration: 6+ Month contract with possible extension Must be located within 50 miles within one of the listed BV offices below- Onsite 5 days/week Locations: Dallas, TX; Houston, TX; College Station, TX; San Antonio, TX The Virtual Design & Data Solutions (VDDS) Staff Engineering Technician under general supervision, performs advanced functions requiring technical knowledge and use of electronic applications, standards, and document control processes/procedures in support of creating or modifying deliverables. This role will be responsible for the development of site drainage, grading, and utility plans using Autodesk Civil 3D and Bentley MicroStation. This role will be within the Black & Veatch Governments & Water Utilities (G&Wu) group, supporting client needs related to water, wastewater, linear pipelines, and other water-related solutions. Required: AdvancedCivil 3D experience is required with use of pipe/pressure networks, proposed grading surfaces and plan and profile development. Must be familiar with plan & profile drawings, alignments, pipe networks and grading. Job Summary Functions in a project engineering technician capacity. Under general direction, supports engineering and design teams by developing and modifying technical deliverables. Applies foundational engineering principles and established design practices to create moderately complex design concepts and solutions. Utilizes digital tools and design software (e.g., CAD, BIM, 3D modeling) to create, modify, and maintain technical documentation, drawings, and project deliverables. Provides technical guidance and may offer direction to other engineering professionals and technicians to ensure quality and consistency across project outputs. Key Responsibilities Applies knowledge of standards, systems, document control, departmental guides, applicable codes and BV policies and procedures. May review project requirements and accurately determine the correct format and contents of the required deliverables. Proactively applies BV Quality Program to deliverables. Demonstrates personal accuracy and supports continuous improvement and change management efforts. Reviews design inputs in order to ensure consistency. Assists to ensure deliverables are in compliance with the specific codes and standards suitable for the project. May apply basic engineering principles and established design practices in developing moderately complex design concepts and deliverables. Begins to apply judgment and make decisions with respect to deliverables and input interpretation. Capable of handling difficult technical assignments within an area of expertise and can provide technical guidance to other professionals. Performs design calculations, detailed material quantities and estimates, and records. May review the deliverables of others. May define work assignments and maintain schedules. May program control systems or participate in other plant start-up activities associated with a specialized area of expertise. Coordinates with other design group personnel to review and exchange project information necessary for design development. May support field activities. Focuses on the needs of internal clients while utilizing an understanding of external client's main interests and drivers. Proactively seeks and shares knowledge of latest technologies and processes . May apply judgment and makes decisions with respect to deliverables and input interpretation. Required Skills: Advanced Autodesk Civil3D is required with use of pipe/pressure networks, proposed grading surfaces and plan and profile development. Must be familiar with plan & profile drawings, alignments, pipe networks and grading. Typically a minimum of 5 years related work experience. Technical Skills: Autodesk Civil 3D Autodesk AutoCAD Bluebeam Experience in the appropriate electronic applications and programs required for performing assignments to include but not limited to CADD or other electronic applications. Advanced ability to interpret engineering deliverable content as assigned. Basic knowledge of engineering standards, systems, document control, departmental guides and B&V policies and procedures. Basic industry knowledge and technology trends. Basic knowledge of company quality program. Basic knowledge of other disciplines. Basic knowledge of construction & constructability practices & principles. Basic knowledge of engineering design principles and applicable design guides related to assigned engineering discipline.

At Furmano Foods, you'll become part of a family-owned business with a purpose far greater than profit. Rooted in faith and tradition since 1921, we are passionate about producing quality, nutritious food, serving others with humility, and stewarding the land for future generations. As a values-driven organization, we offer competitive compensation, comprehensive benefits, and the opportunity to make a meaningful and lasting impact. Job description: Electro Mechanical Technician Furmano Foods is looking for an Electrician for our 2nd shift. Individual must perform maintenance repairs, troubleshooting, and support our food production and labeling operations. The role is responsible for work order completion of planned projects as well as addressing breakdowns, failures, and repairs. Applicants must be comfortable working in both team and individual contributor environments. Only Candidates that meet or exceed the following position requirements will be immediately considered: NO RELATED EXPERIENCE REQUIRED for Candidates who have completed an associate's degree in Electro-Mechanical Technology, completion of a Certified Apprenticeship Program, or applicable DD214 verified Military Training. or A minimum of three (3) years of related electro-mechanical experience Successful candidates will have the following knowledge, skills, and abilities: Extensive PLC (Allen Bradley) technical knowledge (including programming and ladder logic) Ability to read schematics and blueprints. Passion for troubleshooting as well as continuous improvement. High voltage, three phase familiarity. Comfortable replacing motors, drives, and mechanical drive train components. Robotics familiarity is a plus.' This Job Is: A job for which military experienced candidates are encouraged to apply. A job for which all ages, including older job seekers, are encouraged to apply. Open to applicants who do not have a college diploma. Physical Requirements Body Movements - the amount of time spent performing each physical requirement: Occasional - 1/3 or less Frequent - 1/3 to 2/3 Continuous - 2/3 or more Standing: Frequent to Continuous Walking: Frequent to Continuous Sitting: Occasional Lifting: Occasional to frequent (heavy duty position / ability to lift 100lbs+) Carrying: Occasional Climbing: Occasional Climbing Stairs: Frequent Climbing ladders: Frequent Crawling: Occasional Working in kneeling position: occasional Working with arms extended at shoulder level or above: Occasional to Frequent Twisting and Turning: Frequent to continuous Reaching: Frequent to Occasional Bending: Occasional to frequent Driving: Occasional Pushing and Pulling: Occasional Hand Movement: Manual dexterity Simple grasping: frequent Fine manipulation: Occasional Operating Equipment: Occasional Job Type: Full-time Schedule: 2nd Shift-night shift: 3pm-11pm, Monday-Friday 8 hour shift, may need to work extended hours / Overtime based on needs of the business Weekend availability in season w/ specific mandatory Saturdays as needed Note: You may need to train on 1st shift for up to 4 weeks Salary: Up to $29.66 per hour Incentive earning potential along with hourly rate. Benefits: 401(k) 401(k) matching Employee Profit Sharing Dental insurance Employee assistance program Employee discount Flexible spending account Health insurance Life insurance Paid time off Vision insurance Corporate Chaplains On-site Nurse Work Location: One location Experience Required 3 year(s): Electro-Mechanical Experience Education Required Associates or better in Electronics Technology Behaviors Preferred Functional Expert: Considered a thought leader on a subject Detail Oriented: Capable of carrying out a given task with all details necessary to get the task done well Team Player: Works well as a member of a group Motivations Preferred Job Security: Inspired to perform well by the knowledge that your job is safe Goal Completion: Inspired to perform well by the completion of tasks Ability to Make an Impact: Inspired to perform well by the ability to contribute to the success of a project or the organization Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

What You'll Do: Provides electrical design, development, and programming based on approved P&ID (Piping & Instrumentation Diagram) conferring with Team members and management, as necessary. Provides solid technical knowledge of automation technologies including sensors, controllers, actuators and industrial networks. Supports the design, programming, maintenance, repair and troubleshooting of high-speed centrifuges, as well as automated manufacturing systems and equipment at the GEA Janesville facility or customer sites. Understands the theory and applications of fluid power, electrical and mechanical technologies, and programmable logic controllers.. Use a variety of computer-based and electronically controlled systems in process and manufacturing environments. Learn skills necessary to program, assemble, install, troubleshoot, repair, and modify machine instrumentation and controls. Able to measure voltage, current, resistance for single and three phase alternating current and direct current (AC/DC) sources. Apply math to calculate electrical power equation pertinent to the maintenance field. Understands electrical control panel and machinery safety standards (UL 508A, NEC, NFPA). Able to interpret and modify engineering drawings for electrical control panels as well as P&ID (Piping & Instrumentation Diagram). Responsible for the installation and technical support of PLC based hardware and software. Assist in the supervision/training of in-house technical personnel as well as customer plant personnel in repairing, overhauling, installing, testing, and inspecting mechanical and electromechanical equipment. Reviews reports of production, malfunction, and maintenance to determine or address problems. Provides electrical and controls support to customers and GEA personnel as needed, including troubleshooting, and hardware/software modifications. Maintain and update electrical schematics, engineering drawings for production, and technical documentation for new and existent equipment. Familiarity with process controls, motor controls, instrumentation, automation principles, and industrial networking. Has knowledge of commonly used concepts, practices, and procedures utilized in machine control systems. Familiarity with Programmable Logic Controllers (PLC), Human machine Interfaces (HMI) and Variable Frequency Drives (VFDs). Able to troubleshoots and accomplishes minor program changes with these devices as well. On site customer support/start-up. What you bring: Associate degree or equivalent in Electro-Mechanical Technology Minimum 2 years of relevant hands-on experience Strong analytical and problem-solving skills Comfort working with AC/DC systems and 3-phase power Proficiency in interpreting engineering drawings and schematics Familiarity with control systems, process automation, and industrial networking Experience with PLCs, HMIs, and VFDs Ability to travel up to 40% across the U.S. and Canada The typical base pay range for this position at the start of employment is expected to be between $30 - $35/hour. GEA Group has different base pay ranges for different work locations within the United States. The pay range is not a guarantee of compensation or salary. The estimated range is the budgeted amount for the position. Final offers are based on various factors, including skill set, experience, location, qualifications, and other job-related reasons. GEA is an equal opportunity employer. Applicants will therefore receive consideration for employment without regard to age, sex, race, color, religion, world view, national origin, genetics, disability, gender identity, marital status, sexual orientation, veteran status or any other protected characteristic required by applicable law. Applicants with disabilities are welcome and will be given special consideration if they are equally qualified. Please note: This position is based in the United States and does not offer visa or work sponsorship. Applicants must be authorized to work in the U.S. without current or future sponsorship.

TITLE: EQUIPMENT MAINTENANCE TECHNICIAN B SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY 6:00 PM TO 6:00 AM D SHIFT: WEDNESDAY THUR FRIDAY AND EVERY OTHER THURSDAY 6:00 PM TO 6:00 AM FLSA STATUS: NON-EXEMPT REPORTS TO: EQUIPMENT MAINTENANCE SUPERVISOR *Must be willing to train on E shift (Monday thru Wednesday and every other Thursday 12:00 PM to 12:00 AM) for a minimum of two months before moving to assigned shift. SUMMARY: Under the direction of the Equipment Maintenance Supervisor, the Equipment Maintenance Technician is responsible performing routine and preventative maintenance on semiconductor tool sets; ensuring that tools are performing at optimum levels by adhering to the established maintenance schedule; resolving tool issues quickly and efficiently in the areas of plating, CMP, photo, and vacuum; partnering with engineering or other groups to improve tool reliability, minimize downtime, and resolve yield issues; supporting continuous improvement activities; reviewing, updating, and documenting routine maintenance guides; and preparing for pass down meetings as needed. This position is located in Milpitas, California. ESSENTIAL FUNCTIONS: Performs routine and preventative maintenance on tool sets; ensures tools are performing at optimum levels and within specification Troubleshoots and resolves tool issues quickly and efficiently to ensure optimum tool up time Partners with engineering, vendors, or other groups to improve tool reliability, reduce Mean Time Between Failures (MTBF), increase Mean Time to Preventative Maintenance (MTTPM), and resolve yield issues Prepares data or documentation for daily/weekly pass down meetings Reads and interprets schematics, mechanical drawings, manuals, and tool repair guides Recommends improvements or changes to existing processes in support of continuous improvement initiatives Responds to inquiries from other team members, managers, or departments Works scheduled and unscheduled overtime as required Adheres to all safety policies and procedures as required Performs other duties of a similar nature or level MINIMUM QUALIFICATIONS: Associate's degree in electronics, industrial manufacturing, and/or equivalent relevant experience Two years of hands' on experience working in equipment maintenance in the semiconductor or high volume manufacturing industry Strong foundation in pneumatic, electrical, and mechanical disciplines Hands' on experience servicing vacuum tool sets and using hand tools Proficient in the use of Microsoft Office Applications Knowledge, Skills, and Abilities: Knowledge and ability to perform routine and preventative maintenance on various semiconductor tools and tool sets Knowledge and ability to read complex schematics, mechanical drawings, vacuum diagrams and flow charts, OEM manuals, instructions, and tool guides Knowledge and ability to use Microsoft Office applications Ability to follow written or verbal instructions with minimal supervision Able to communicate effectively, both verbally and in writing, with all levels of contractors, consultants, employees, and management Able to work productively and collaboratively with all levels of employees and management Able to comply with all safety policies and procedures Able to comply with all clean room protocols and procedures Demonstrated ability to resolve equipment maintenance issues quickly and efficiently Demonstrated organizational and time management skills Demonstrated problem-solving and trouble shooting skills Demonstrated analytical and critical thinking skills Flexible and able to prioritize The hourly rate for this full-time position is between $30.00-$55.00 + bonus target + benefits. Within the range the individual pay may differ depending on additional factors including job responsibilities, job related knowledge, skills, abilities, education, and experience. The hourly pay range shown is subject to change and may be modified periodically. WORKING CONDITIONS: The Equipment Maintenance Technician works primarily in an indoor environment on a rotating schedule on B shift which is Monday thru Wednesday and every other Thursday 6:00 PM to 6:00 AM or D shift which is Friday thru Sunday and every other Thursday 6:00 PM to 6:00 AM. Work hours may be altered from time-to-time contingent on business needs. Works in a class 100 ESD sensitive wafer manufacturing facility; wears a cleanroom (bunny) suit, including hood, gloves, safety glasses, booties, and mask. May be exposed to hazardous conditions, chemicals, fumes, and/or gases during the course of work day; may be exposed to loud noise; may work in close proximity to moving mechanical parts. Stands and walks, bends, twists, and crawls; May occasionally be required to work in crawl spaces, shafts, or other areas that could cause claustrophobia; wears a respirator in order to accommodate safety requirements. Performs various fine grasping movements; operates a computer and enters information using a keyboard, operates a telephone, and other office equipment; may occasionally push, pull, or lift up to 50 pounds. *Other duties of a similar nature or level are duties that may be required, but may not be specifically listed in the job description or posting. TDK/Headway Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. Applicants requiring accommodation in order to complete the application process should contact the Headwa

TITLE: PLATING PROCESS TECHNICIAN FLSA STATUS: NON-EXEMPT A SHIFT: MONDAY THRU WEDNESDAY AND EVERY OTHER THURSDAY 6:00 AM TO 6:00 PM REPORTS TO: DIRECTOR, PLATING PROCESS ENGINEERING Under the direction of the Director of Plating Process Engineering, the Plating Process Technician provides support to the engineering teams in the plating area, including assisting with wet etch process, preparing and maintaining recipes, reviewing and documenting process or procedures, and expediting and dispositioning prototype wafers; maintains process controls using Statistical Process Control (SPC), collects and analyzes data, and recommends corrective action. This position is located in Milpitas, California. ESSENTIAL FUNCTIONS: Provides support to the engineering teams in the plating, wet etch, and stripping process areas Supports the plating, wet etch, and stripping processes by preparing, maintaining, and setting up recipes to ensure an efficient and consistent process Reviews and documents processes and procedures; partners with engineering to implement changes effectively Expedites and dispositions prototype wafers in the plating, wet etch and stripping areas Assists engineers to run plating process development experiments, collects and analyzes data, and recommends corrective action if required Reviews and maintains process controls using SPC and prepares charts and graphs Assists with routine trouble-shooting and resolves basic process-related issues Participates in and recommends modifications to procedures or processes in support of continuous improvement initiatives Collaborates with Engineering to qualify or approve new processes or procedures Creates reports, charts, or graphs on an ad-hoc or routine basis Prepares daily pass down report for engineers, next shift plating process technicians, and manufacturing plating technicians Responds to inquiries from other team members, managers, or departments Adheres to all safety policies and procedures as required Performs other duties of a similar nature or level* MINIMUM QUALIFICATIONS: Associates degree in Electronics or Industrial Technology and/or equivalent relevant experience Two years of experience working in the semiconductor industry Knowledge of plating, wet processes and procedures Hands on experience using metrology tools such as pH meter, Tencor Thickness Profiler, XRF, and B-H loop tools Proficient in the use of Microsoft Office Applications Required Knowledge, Skills, and Abilities: Knowledge of semiconductor or hard disk drive (HDD) principles and processes Knowledge and ability to use SPC to maintain process controls Knowledge of plating, wet processes and procedures Ability to collect and analyze data, present findings, and recommend corrective action Ability to adhere to all safety policies and procedures Ability to communicate effectively with all levels of employees and management Demonstrated ability to follow routine verbal or written instructions Demonstrated problem solving and organizational skills Demonstrated time management and prioritization skills Skilled at resolving issues quickly and efficiently Flexible and able to prioritize The hourly rate for this full-time position is between $25.00-$40.00 + bonus target + benefits. Within the range the individual pay may differ depending on additional factors including job responsibilities, job related knowledge, skills, abilities, education, and experience. The hourly pay range shown is subject to change and may be modified periodically. WORKING CONDITIONS: The Plating Process Technician works primarily in an indoor environment on A shift which is Monday thru Wednesday and every other Thursday 6:00 AM to 6:00 PM. The schedule may be altered from time-to-time to meet business or operational needs; may travel from building-to-building as needed. Works in a class 100 ESD sensitive wafer manufacturing facility; wears a cleanroom (bunny) suit, including hood, gloves, safety glasses, booties, and mask. May be exposed to hazardous conditions, chemicals, fumes, and/or gases during the course of work day; Stands and walks; performs various fine grasping movements, bends, and twists; operates a computer and enters information using a keyboard, operates a telephone, and other office equipment. Must be able to load and unload various wet etch chemical solutions several times per shift. May be required to push, pull, or lift up to 25 pounds. *Other duties of a similar nature or level are duties that may be required, but may not be specifically listed in the job description or posting. TDK/Headway Technologies, Inc. provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability, or genetics. Applicants requiring accommodation in order to complete the application process should contact the Headway Human Resources Department.

At Furmano Foods, you'll become part of a family-owned business with a purpose far greater than profit. Rooted in faith and tradition since 1921, we are passionate about producing quality, nutritious food, serving others with humility, and stewarding the land for future generations. As a values-driven organization, we offer competitive compensation, comprehensive benefits, and the opportunity to make a meaningful and lasting impact. The Automation Technician plays a vital role in supporting and advancing the automated systems throughout the food manufacturing facility. This individual will be responsible for the installation, maintenance, troubleshooting, and enhancement of electrical and control systems with a strong focus on safety, quality, and continuous improvement. Education and Experience: Associate degree in Electrical Technology or related field is strongly preferred. Minimum 3 years of experience in automation, instrumentation, or controls within a food manufacturing or industrial setting. · Equivalent combinations of education and experience will be considered. Essential Duties and Responsibilities: 1.Ensure food safety compliance in all activities, report concerns promptly to supervisors or managers. 2.Recommend and specify new automation systems and control solutions to improve plant efficiency. 3.Maintain and troubleshoot electrical/electronic systems including PLCs, HMIs, robotics, servos, sensors, and associated hardware. 4.Lead or support the design, programming, and installation of control systems using Allen-Bradley or equivalent platforms. 5.Collaborate on continuous improvement projects and plant-wide modernization efforts. 6.Assist with the execution and management of capital projects under the direction of the Director of Engineering. 7.Provide day-to-day support for the Engineering and Maintenance Department, including documentation and scheduling. 8.Maintain accurate and detailed records of work performed, including updates to schematics and software logs. 9.Promote a culture of teamwork, integrity, and proactive communication. 10.Perform other related duties as assigned. Skills and Competencies: Proficiency in PLC programming and troubleshooting (especially Allen-Bradley hardware/software). Working knowledge of operator interfaces (HMIs), robotics, VFDs, and servo systems. Ability to interpret and modify electrical schematics and automation documentation. Strong capabilities in ladder logic, control narratives, and system integration. Experience using AutoCAD, Microsoft Excel, Word, and Project. Excellent written and verbal communication skills; ability to work in a cross-functional team environment. Organized, detail-oriented, and comfortable in a fast-paced production environment. Education: Associate (Preferred) Experience: Industrial controls: 3 years (Required) Physical Requirements: Body Movements - the amount of time spent performing each physical requirement: Occasional - 1/3 or less Frequent - 1/3 to 2/3 Continuous - 2/3 or more Standing: Frequent to Continuous Walking: Frequent to continuous Sitting: Occasional to Frequent Lifting: Occasional to frequent (medium duty position / ability to lift 30lbs) Carrying: Occasional to frequent (medium duty position / ability to carry 30lbs) Climbing: Occasional Climbing Stairs: Occasional Climbing ladders: Occasional Crawling: Occasional Working in kneeling position: Occasional Working with arms extended at shoulder level or above: Occasional Twisting and Turning: Frequent to continuous Reaching: Occasional to frequent Bending: Occasional to frequent Driving: Occasional Pushing and Pulling: Occasional Hand Movement: Manual dexterity Simple grasping: frequent Job Type: Full-time Work Schedule: This position typically follows the hours of the shift scheduled to work; however, working days may vary based on season. Typically, Monday through Friday. Very often Saturday & 12 hours Shifts may be required during busy times. Hours: 2nd Shift - 2:00 PM to 10:30 PM/ 3rd Shift - 10:00 PM to 6:30 AM 30 minutes unpaid lunch Salary: Up to $35.34 per Hour Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Employee discount Flexible spending account Health insurance Health savings account Life insurance Paid time off Referral program Retirement plan Vision insurance Onsite nurse Corporate Chaplain Ability to Commute: Northumberland, PA 17857 (Required) Ability to Relocate: Northumberland, PA 17857: Relocate before starting work (Preferred) Work Location: In person Employment Disclaimer: This position is based in Pennsylvania and is considered "at-will." This means that either the employee or the employer may terminate the employment relationship at any time, with or without notice, and for any reason not prohibited by law. We are an equal opportunity employer and comply with all applicable federal, state, and local employment laws, including those prohibiting discrimination on the basis of race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, genetic information, or any other protected status under the law. This job description describes the general nature of the duties and requirements of this job. It is not intended to be an exhaustive list or limit the supervisor's ability to modify work assignments as appropriate to meet the needs of the organization.

Do you want to work for a company where the people are the purpose? Grimco is a leading $1.5 billion sign supply distribution company serving the graphics and signage industry. As a family-owned business, we combine the stability and resources of an industry leader with the agility and innovation of an entrepreneurial environment. Job Description We're seeking a Mechanical/Industrial Engineering Intern who wants real-world experience applying Six Sigma methodologies in a manufacturing environment. You'll own process improvement projects from concept to completion, working hands-on in our production facility to drive measurable operational enhancements. What You'll Do Design and execute Design of Experiments (DOE) in manufacturing environments to optimize process parameters and product quality Conduct Big Data Analysis to uncover patterns and insights from production data streams Combine AI with Mechanical and Industrial Engineering tools to develop intelligent automation solutions Execute DMAIC projects to reduce process variation and eliminate manufacturing waste Conduct time studies, process mapping, and statistical analysis to identify improvement opportunities Design and prototype automation solutions for production line efficiency Apply statistical process control techniques to monitor and optimize manufacturing operations Collaborate with production teams to implement Lean manufacturing principles Present data-driven findings and recommendations to facility leadership Qualifications Currently pursuing a degree in Industrial, Mechanical, Manufacturing, or related Engineering field Expected graduation date: 2027 or 2028 Coursework or project experience in Six Sigma, statistical analysis, or process improvement Self-starter who thrives with autonomy and data-driven problem solving Comfortable working in a manufacturing environment with production equipment Familiarity with statistical software, process mapping tools, or quality control methodologies Ready to make your mark? Apply today and join us in driving operational excellence in sign manufacturing! What We Offer Hands-on experience applying Six Sigma tools with immediate impact Mentorship from experienced engineering professionals and certified Black Belts Exposure to diverse manufacturing processes in the sign and graphics industry Competitive internship compensation Potential for full-time opportunities upon graduation Additional Information Grimco is a national wholesale sign supply manufacturer and distributor with over 50 locations across North America. We focus on distributing quality products and providing excellent service to the sign industry. Our offering of sign supplies includes traffic signs, blanks, substrates, boards, digital print media, wrap films, sign vinyl, application tape, banner material and supplies, sign frames, banner stands, LEDs and electrical accessories, grand format solvent/UV/latex printers, inks, software and more. By completing this online application for employment, you certify that the information on this application is true and complete to the best of your knowledge. You understand that any misrepresentation or omission of fact in response to any inquiry made in this application may result in rejection of application or, if hired, dismissal whenever it is discovered. You authorize and release all parties from any liability or damage that may result from seeking, furnishing, or using such information. You understand and agree that, if hired, your employment is for no definite period and may, regardless of the date of payment of compensation, be terminated by Grimco, Inc. at any time, for any or no reason, with or without notice. You understand that no representation to the contrary is valid unless in writing, set a definite term of employment, and signed by the company's CEO. You further understand and agree that any job offer is contingent upon your passing, to the company's satisfaction, a drug and/or alcohol test, criminal background check and other possible screenings. You understand that this application is active for 90 days only, and if you do not hear from the company but still wish to be considered for employment after 90 days, you will need to fill out a new application.

Flex Technician - (Conveyance/Conveyors) Job Summary/Overview This position will be assigned to different departments, work in operations where there is a need to backfill vacant positions, cover for leaves or spikes in business. Work Schedule 6:00am - 2:30pm Monday - Friday Essential Duties and Responsibilities Use of proper processes, procedures and OMS instructions, cycle counting procedures Proper safety procedures Daily participation and demonstrated 5-S practices Daily/Weekly/Monthly preventative maintenance duties on machines & equipment Continually open to learning and acquiring new skills by progressing through the skills matrix Specialize in either assembly or fabrication Perform regular production or assembly duties as required within the respective cell or department. Knowledge, Skills, Competencies, and Abilities A team player with excellent communication skills. Strong mechanical aptitude and solid blueprint reading skills. Ability to deal with ambiguous/undefined problems. Ability to be flexible and adjust priories to reflect changing needs or job demands. Strong attention to detail. Required Qualifications Highschool diploma or equivalent. 2 + years of experience in a Manufacturing Environment is preferred. Certification for sit-down forklift, Raymond and use of overhead crane or the willingness to obtain via training. Ability to safely lift/lower/push/pull up to 40 lbs. Compensation $20+ per hour, depending on experience Benefits Climate controlled facility Free coffee daily 11 paid holidays Vacation and sick time Medical, Dental, Vision insurance, effective day 1 401(k) Paid parental leave Tuition assistance Disability insurance About Columbus McKinnon: Columbus McKinnon is a leading worldwide designer, manufacturer and marketer of intelligent motion solutions that move the world forward and improve lives by efficiently and ergonomically moving, lifting, positioning and securing materials. Key products include hoists, crane components, precision conveyor systems, rigging tools, light rail workstations and digital power and motion control systems. We are focused on commercial and industrial applications that require the safety and quality provided by our superior design and engineering know-how. Columbus McKinnon is a publicly traded company that has been in business for almost 150 years - proud of our heritage, where we come from, and where we're going. As Columbus McKinnon grows globally, so does our need for driven and inspired employees. Join our winning team! Columbus McKinnon Corporation promotes a diverse and inclusive workforce and is an Equal Opportunity Employer that does not discriminate against employees or applicants for employment on the basis of race, color, national origin, ancestry, age, religion, sex, gender, gender identity, gender expression, sexual orientation, physical or mental disability, medical condition, genetic information, military or veteran status, marital status, or any other Federal or State legally-protected classes. We also value the safety of all associates and work hard to maintain a Drug Free Workplace.

We are seeking a skilled Trailer Technician to join our team. The ideal candidate will be responsible for maintaining, diagnosing, and repairing our fleet of trailers to ensure safe and efficient transportation operations. Key Responsibilities Perform routine maintenance and inspections on trailers including brakes, lights, tires, and suspension systems Diagnose mechanical and electrical issues and perform necessary repairs Conduct DOT inspections and ensure all trailers meet safety and compliance standards Maintain accurate service records and documentation Perform welding and fabrication work as needed Replace and repair trailer doors, hinges, flooring, and other structural components Service and repair refrigeration units on temperature-controlled trailers (if applicable) Collaborate with transportation team to prioritize repair schedules and minimize downtime Qualifications High school diploma or equivalent required 2+ years of experience in trailer maintenance and repair preferred Strong knowledge of air brake systems, electrical systems, and trailer components Ability to use diagnostic tools and equipment Welding and fabrication skills preferred Valid driver's license required; CDL preferred but not required Ability to lift heavy objects and work in various weather conditions Strong attention to detail and commitment to safety Why You'll Love This Job Tool & Boot Allowance - Get a $300 annual boot allowance and $500 annual tool allowance so you're always equipped for the job. Comprehensive Benefits - Health, dental, vision, retirement plans, and paid time off to support your well-being. Competitive Pay & Shift Differentials - Earn what you're worth with opportunities for additional pay. Growth & Stability - Work with a company that invests in its mechanics and keeps you busy year-round. Who We Are At Ashley, we're more than a business; we're family. As the largest manufacturer of home furnishings in the world, we know what it takes to build incredible furniture and future leaders. We're problem solvers with the grit to persevere during challenging times and innovators who won't coast when times are good. We create solutions, not excuses. And never settle for the status quo. It's the reason we're always searching for better ways to deliver an exceptional customer experience. That's why Ashley Furniture is #1 in our industry. Ready to grow? You've come to the right place. Ashley Furniture has a "Growth Mindset", and once you join our team, you'll learn from the best in the business. Apply today and find your home at Ashley! Benefits We Offer Health, Dental, Vision, and Employee Assistance Program Paid Vacation, Holidays, and Your Birthday off Generous Employee Discount on home furnishings Professional Development Opportunities Ashley Wellness Centers (location specific) and Medical Tourism Telehealth 401(k) and Profit Sharing Life Insurance Our Core Values Honesty & Integrity Without hesitation, he uses candor and is direct in communication Is tough-minded in working in and meeting the demands of reality Always tells the truth and follows through on commitments Passion, Drive, Discipline Enjoys working hard and pursues work with energy, drive, and willpower to finish Is disciplined in developing consistency into work processes Is focused and relentless in achieving goals Continuous Improvement/Operational Excellence Fights to take costs and waste out of the system Seeks to understand "why" something works the way it does, and through study and improvement determines how to better all processes and systems. Strives for more in all areas of work by developing measurements, setting goals, and then working on ways to exceed goals through problem-solving methods that look beyond the obvious Dirty Fingernail Does not rely on reports to run the business, but rather goes to the work that is being done and sees if the work is being done right for him/herself. Has an insatiable curiosity and takes a "Go and See" approach to understand the current state of the business and the competitive realities Takes a hands-on approach to tackle problems and demonstrates critical thinking through use of effective questioning...asking the 5 "Whys" Growth Focused Understands the customer's needs and wants, then challenges current ways of doing business that inhibits growth and organizes work to meet those needs Is competitive by studying the competition and is aggressive in looking for ways to beat them Strives to be the BEST by improving the quality of processes, reducing costs, doing more business, being profitable, and growing the business To learn more about Ashley Furniture, our community engagement programs, environmental stewardship, and our core values, please visit our Corporate Social Responsibility information page: Corporate Social Responsibility We are an equal opportunity employer and provide a drug-free working environment. While Ashley appreciates the interest of all candidates, only those meeting specific position requirements may be contacted. Principals Only.