Manufacturing technician jobs in Olympia, WA - 178 jobs

The primary function of the BAG (Bulk Atmospheric Gases) Production tech position is to ensure safe and reliable operation of the Fife Air Separation Plant. Utilizing plant operations knowledge, the BAG Production tech works in a team environment where individuals are empowered to set priorities and complete different activities with minimal supervision. Primary Responsibilities: Successful candidates must be able to understand principles of the Hazardous Work Permit and Lock Out Tag Out as well as compliance with all Government and Linde Environmental Permits, Regulations and Policies. This is a full-time position in Fife, Washington. This is a 10-hour Shift position M-Th or Tues-Fri, with an on-call rotation starting approximately 8 months after hiring. * Follow safe work permit processes, policies and procedures * Assist in the training and development of new employees * Understand Production KPIs and work towards achieving these goals * Understand the theoretical aspects of the process and adjust controls toward achieving desired flows, pressures, and purities * Understand the theoretical aspects of the process and adjust controls toward achieving desired flows, pressures, and purities * Ensure customer quality requirements are met for ALL products: maintain Quality Program * Understand and Monitor efficiency of equipment: cooler approaches, water temp rise, and unit efficiency on equipment * Understand P&ID and control loop input-output logic * Understand and follow all SMP, SOP, COP, OSS, and OPS alerts and Technical Bulletins * Understand and resolve fill zone and backup system issues * Understand what parameters the analyzer must function under (i.e. Reference gas flows, product gas flows) * Understand and conduct water tests on cooling tower and boilers: make the necessary adjustments needed to keep control * Maintain building and grounds equipment * Monitor and communicate contractor activities in all areas covered above when required * Complete all LMS training modules and OJT for an assigned job per the assigned time line Qualifications: * High School Diploma or equivalent is required. * Associates in Applied Sciences Degree or equivalent apprenticeship preferred. * Previous experience in a continuous chemical operation environment * Motivated, self-starter capable of effectively managing multiple tasks and priorities * Relevant computer and technical skills * Must be able to work overtime and weekends as required * Must have strong, written, verbal and interpersonal communication skills * Must have a current and valid driver's license * Must be able to meet the physical demands of the job * Lift 50 pounds * Climb stairs and ladders * Work in tight and closed spaces * Be able to wear all required personal protective equipment About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** Salary: Pay commensurate with experience. Open to salary range $62,948 - $92,323. Benefits: Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-NB1

Bloodworks is seeking a detail-oriented individual to perform a wide variety of tasks in a detailed, sequential manner, according to standard operating procedures, resulting in the production and final labeling of blood components. Working in a highly-regulated, and team-oriented environment, the incumbent will prepare, document, evaluate, quarantine/segregate, perform routine labeling of, and package and create transfer records for blood and blood components according to standard operating procedures, as well as operate and maintain equipment used in the processing and labeling of blood components. Requirements include, but are not limited to: Education and Experience: Meet CLIA requirements for moderate complexity testing. Minimum requirements include a high school diploma or equivalent and training in testing performance.d Two years of post-secondary education, or equivalent combination of education and relevant work experience. Relevant work experience is considered in any of the following: One year of experience in a regulated or high-volume production environment, OR one year of blood-banking or pharmaceutical experience, OR one year of work experience in an environment requiring significant multitasking. Job-specific skills include, but are not limited to: The Ability to adhere to a series of complex process steps involving interaction with multiple computer systems and physical handling of inventory. The Ability to work effectively in a team-oriented environment and with staff from other departments. The Ability to lift and carry up to 35 pounds. Shift: 2nd Working Conditions include: Work schedule: Second or Third shift. Work a flexible schedule including weekends, holidays, and overtime, as well as the Ability to take on-call responsibility as assigned. This position also involves occasional intermittent refrigeration work. Benefits and Perks: Employees regularly scheduled for 24+ hours per week are covered by medical, dental, vision, and life insurance, with family coverage also available. Also able to participate in retirement plans (401a & 401b), consolidated paid leave program (4.8 - 6.8 weeks of time off accrued per year, based on length of service), subsidized transit program, and educational reimbursement. Candidates hired from outside of our service area may be eligible for a relocation assistance bonus* *Conditions apply

Type: Non-Exempt Work Schedule: Full-Time Compensation: $19.00 - $33.00 per hour (Dependent on Experience) Manufacturing Benefits: Tessera is proud to offer a comprehensive compensation and benefits package to our eligible part-time and full-time employees. Medical, Dental, Vision, Life & Short-Term Disability Insurance Elective 401(k) retirement plan, Tessera will match 0.5% for every 1% up to 6% after 90-days of employment. Funds are subject to vesting. Flexible Spending Accounts for both medical and dependent care 11 paid holidays, accrual of 10 paid days of vacation at the start of employment, paid sick leave Potential shared earning bonus Tuition assistance is available after 1 year of employment and potential scholarships for qualified dependents Professional development, certifications, and training opportunities Verizon wireless discount Employee Assistance Program (EAP), and an engaging wellness program Public Service Loan Forgiveness eligibility for full-time employees Tessera is dedicated to “Creating Opportunities for People with Disabilities” by hiring and supporting individuals with disabilities as well as veterans with disabilities. We take pride in our purpose-driven culture, our core values - Inclusion, Partnerships, Integrity - and our commitment to providing a safe and respectful work environment to our employees. Tessera is seeking a new Aerospace Manufacturing Technician join our manufacturing team in Auburn, Washington. The Aerospace Manufacturing Technician will perform a variety of tasks to support the daily operations of the machine shop, ensuring efficient production, quality parts, and a safe work environment. This position involves operating various machinery, deburring parts, performing assembly work, and maintaining cleanliness and organization. The selected individual will be cross-trained to collaborate across departments and assist with related functions when necessary. Typical duties include but are not limited to: Operate various equipment, which may include CNC and manual machines (mills, lathes, drills), grinders, saws, water jet, presses, part mark machine, and other production equipment. Perform secondary operations such as deburring, filing, sanding, cleaning, assembling, and part marking & packaging parts to required specifications. Load and unload raw materials and finished parts from machines. Monitor machine operations to detect malfunctions or defects and report any issues to the supervisor promptly. Use precision measuring tools, such as calipers, micrometers, and tape measures, to perform quality checks on in-process and finished parts. Read and follow written work instructions, production orders, and basic blueprints or sketches. Maintain a clean, organized, and safe work area, including cleaning machines and sweeping the shop floor. Follow company safety policies and procedures, always wear Personal Protective Equipment (PPE). Perform routine cleaning and daily preventative maintenance on equipment as instructed. Assist in part marking, packaging and preparing finished goods for shipment. Collaborate effectively with team members and supervisors throughout manufacturing. Flexible and willing to be assigned to any area needed daily. All Other Duties as Assigned. Qualifications: High School Diploma or GED is required. 6+ months of previous experience working in Aerospace industry is required. Combination of previous experience and education will be considered. Previous experience interpreting blueprints is highly preferred. Previous experience using measuring and hand tools is highly preferred. Previous Machine Operator or Assembly experience is highly preferred. Physical Requirements: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance. The physical demands of this position may be reasonably accommodated for individuals with disabilities to perform the essential functions on a case-by-case basis. Must be able to lift and/or move up to 50 pounds. May be required to reach, kneel, walk, stand, and use repetitive motion for several hours at a time based on position duties. Work may require repetitive motion, reaching, lifting, kneeling, and walking. Standing or sitting for several hours at a time, climbing in and out of a vehicle, and up and down stairs may also be required. Must have the perseverance to work effectively under pressure for extended periods of time. Requirements: A valid state driver's license is required with the ability to obtain and maintain coverage by Tessera's insurance. Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** Must be able to obtain and maintain applicable security clearances and installation access. A background check and E-Verify will be conducted for this position. *** Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** To Apply: Visit our website at *************** to complete an application. Current Employees: need to log into their Workday to apply through the Jobs Hub . Please reach out to your Recruiter if you need assistance. Tessera is a national non-profit, government contractor that is dedicated to “Creating Opportunities for People with Disabilities” through hiring and supporting individuals with disabilities and veterans with disabilities. We take pride in our mission-focused culture, our Core Values, Diversity, Partnership, Commitment, Integrity, and Quality, and our dedication to providing a safe and respectful work environment to our employees. Individuals with disabilities are encouraged to apply. Tessera is here to help you with the recruitment process. If you require an accommodation or support, please contact us at ************** ext. 349, or email **********************. Tessera is an Equal Opportunity Employer - Women/Minority/Veteran/Disabled - Tessera participates in E-Verify

Pay rate: $26.00 per hour Bonus eligible: No Benefits: Cardinal Health offers a wide variety of benefits and programs to support health and well-being. Medical, dental and vision coverage Paid time off plan Health savings account (HSA) 401k savings plan Access to wages before pay day with my FlexPay Flexible spending accounts (FSAs) Short- and long-term disability coverage Work-Life resources Paid parental leave Healthy lifestyle programs Application window anticipated to close: 02/23/2026 *if interested in opportunity, please submit application as soon as possible. What Nuclear Manufacturing contributes to Cardinal Health Manufacturing is responsible for cost of production and maintenance activities including process improvement, supply chain management, quality assurance, employee safety and engagement, and environmental commitment. Nuclear Manufacturing is responsible for the manufacturing of time sensitive radiopharmaceuticals in an integrity driven, highly regulated environment (i.e. FDA, NRC, DOT) to support patient treatment through disease diagnosis, staging, and monitoring. Schedule: 40 Hours per week Shift: This position works the night shift and operates with rotating shifts, Sunday-Thursday from 9:00 PM to 5:30 AM, or 4:00 AM to 12:30 PM with variation in schedule based on business need Candidate must be flexible to work different shifts, schedules, days and overtime as needed Responsibilities Successfully complete extensive training, including e-learning assignments and hands on components, to demonstrate and maintain proficiency Manufactures radioactive isotopes (includes synthesis set up, hot cell manipulations, distribution) Conducts quality control testing of each batch (utilizing gas chromatograph, dose calibrator, multi-channel analyzer, TLC plate scanner, high pressure liquid chromatograph, analytical balance, PTS, laminar flow hood and fume hood) Works in ISO 7 cleanroom to make product vials and customer vials for use in drug production Performs environmental and personnel monitoring in ISO 5, ISO 7, and ISO 8 environments Coordinates daily production run schedule based on customer and pharmacy needs Demonstrates strong documentation practices, oral communication, and writing skills. Performs clerical and administrative tasks, including maintenance of daily production records, report preparation and maintenance records Manages SAP Inventory (includes receiving materials, properly inspecting materials for use, and maintaining proper cycle counts) Performs daily radiation safety tasks, along with general lab cleaning Qualifications High school diploma, GED or equivalent or equivalent work experience, preferred. Education in Sciences (Chemistry, Biology etc. preferred). 0-1 years of experience preferred Lab experience highly preferred Must be able to work overnight shift (Facility operates at night.) Prior experience in manufacturing, preferably in a controlled environment and/or regulated industry desired. Effective written and verbal English communication skills Able to repeatedly follow detailed processing instructions Ability to manage several tasks at the same time; Ability to evaluate operating conditions and exercise sound judgment and problem-solving skills. Ability to manage up to 75 pounds as needed Ability to see fine particulate and differentiate colors in liquid solutions. Ability to hear, write (English), and speak (English) clearly in order to communicate in manufacturing setting. Manual dexterity required for equipment operation and occasional reach and lifting of small objects. Ability to be an effective team member. Comfortable working in a nuclear environment Ability to work weekends or be in a weekend rotation Ability to work holidays or be in a holiday rotation Ability to travel up to 10 percent Ability to work overtime with little or no advance notice What is expected of you and others at this level Applies basic skills and techniques to complete routine tasks within assigned area Maintains appropriate licenses, training and certifications Works on basic and routine assignments Works within clearly defined Standard Operating Procedures and/or scientific methods Adheres to all quality guidelines Works under close supervision All work is reviewed for accuracy Any deviations from the norm are approved by the supervisor before proceeding 10 percent travel Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply. Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law. To read and review this privacy notice click here

At Niagara, we're looking for Team Members who want to be part of achieving our mission to provide our customers the highest quality most affordable bottled water. Consider applying here, if you want to: Work in an entrepreneurial and dynamic environment with a chance to make an impact. Develop lasting relationships with great people. Have the opportunity to build a satisfying career. We offer competitive compensation and benefits packages for our Team Members. Production Operator (Nights) This position is responsible for daily operations of the production floor; ensuring the shift meets established safety, quality, and production goals in compliance with all applicable legal and food safety requirements. Essential Functions Responsible for daily activities of the production line(s), ensuring product adheres to Niagara's standard of safety, quality, and throughput. Accurately completes applicable quality and production reports hourly. Physical and visual inspection of product is required to prevent non-conforming goods. Correctly reports all quality defects to the appropriate team members and shift leadership. Adheres to the highest standards of company and plant safety programs, guidelines, rules, and regulations. Abides by Niagara's Good Manufacturing Practices (GMP) and Food Safety Standards at all times. Maintains general housekeeping in all areas of production and additional areas assigned by plant leadership. Maintains appropriate level of raw materials as required, to ensure production lines incur minimal downtime. Demonstrates the aptitude and skill to work in all assigned areas of production; troubleshoots minor production line issues and performs relief duties when required. Regular and predictable attendance is an essential function of the job. Ability to work 12 hour shifts, day or night, on a rotating 2-2-3 schedule or schedule as dictated by production demand. Please note this job description is not designed to contain a comprehensive list of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without prior notice. Qualifications Minimum Qualifications: 0 Years - Experience in Field or similar manufacturing environment 0 Years - Experience in Position 0 Years - Experience managing people/projects *experience may include a combination of work experience and education Preferred Qualifications: 2 Years - Experience in Field or similar manufacturing environment 2 Years - Experience in Position 2 Years - Experience managing people/projects *experience may include a combination of work experience and education Competencies This position embodies the values of Niagara's LIFE competency model, focusing on the following key drivers of success: Lead Like an Owner Makes safety the number one priority Keeps alert for safety issues and escalates immediately Effectively prioritizes tasks based on department goals Shows respect to others and confronts interpersonal issues directly Prioritizes resolution of customer issues effectively Responds promptly and honors commitments to internal and external customers InnovACT Makes recommendations to continuously improve policies, methods, procedures, and/or products Demonstrates adaptability by reacting appropriately to unexpected changes in situations or circumstances Increases performance through greater efficiency Find a Way Seeks to develop technical knowledge through learning from other experts Understands interdepartmental impact of individual decisions and actions Seeks solutions rather than placing blame Empowered to be Great Consistently looks for ways to improve one's self through growth and development opportunities Communicates clearly and promptly up, down, and across Communicates effectively to manage expectations Education Minimum Required: High School Diploma or GED Preferred: Associate's Degree Certification/License: Required: N/A Preferred: N/A Foreign Language Required: None Required Preferred: None Required Typical Compensation Range Pay Rate Type: Hourly$20.01 - $27.02 / Hourly Benefits Our Total Rewards package is thoughtfully designed to support both you and your family: Regular full-time team members are offered a comprehensive benefits package, while part-time, intern, and seasonal team members are offered a limited benefits package. Paid Time Off for holidays, sick time, and vacation time Paid parental and caregiver leaves Medical, including virtual care options Dental Vision 401(k) with company match Health Savings Account with company match Flexible Spending Accounts Expanded mental wellbeing benefits including free counseling sessions for all team members and household family members Family Building Benefits including enhanced fertility benefits for IVF and fertility preservation plus adoption, surrogacy, and Doula reimbursements Income protection including Life and AD&D, short and long-term disability, critical illness and an accident plan Special discount programs including pet plans, pre-paid legal services, identity theft, car rental, airport parking, etc. Tuition reimbursement, college savings plan and scholarship opportunities And more! *********************************************** * *Los Angeles County applicants only** Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers, the California Fair Chance Act, and any other applicable local and state laws. Any employment agency, person or entity that submits a résumé into this career site or to a hiring manager does so with the understanding that the applicant's résumé will become the property of Niagara Bottling, LLC. Niagara Bottling, LLC will have the right to hire that applicant at its discretion without any fee owed to the submitting employment agency, person or entity. Employment agencies that have fee agreements with Niagara Bottling, LLC and have been engaged on a search shall submit résumé to the designated Niagara Bottling, LLC recruiter or, upon authorization, submit résumé into this career site to be eligible for placement fees.

In 1897 C.C. Filson began outfitting prospectors headed for the Gold Rush with tools and apparel strong enough for the toughest spots on earth. More than 100 years later, Filson remains committed to providing pioneers of all fields around the world with unfailing goods made from the highest quality materials available. Filson recognizes that it takes a world-class team to make a world-class product. As we build on the Filson legacy of American craftsmanship, we are looking for individuals who share our dedication to innovation, excellence, and superior customer service. We don't work in silos but rely on open collaboration. It's a jackknife mentality - the ability to accomplish more than what's asked of you - that defines our culture of versatility and perseverance. Our outfitter mindset is deliberate and strategic. We are a small company, on purpose. We're the ones doing the work, from product design and marketing, to cutting, sewing, and restoration. With more than 125 years under our belt, we still have a start-up mentality. Driven by an independent spirit and an uncompromising attitude that demands we lead with conviction. ABOUT THE ROLE The Manufacturing Prep Specialist supports Filson's production operations by managing pre-production and post-production processes that enable efficient cutting, assembly, audit, and outbound shipment of finished goods. This role plays a key part in ensuring accuracy, readiness, and flow throughout the manufacturing process. RESPONSIBILITIES Create and print markers using Accumark to support cutting room operations Process production work orders and confirm completed units Confirm completed units Prepare completed units for audit Process Transfer Orders for outbound shipments Print Purchase Orders & UPC labels Maintain and update Cuts & Kits Received logs Manage UPC hang tag preparation and tracking Prep finished goods for outbound shipment Assist with outbound shipment packing as needed Perform other duties as assigned QUALIFICATIONS Experience operating or supporting industrial manufacturing equipment Strong attention to detail and accuracy Ability to follow written and verbal instructions Self-motivated with a team-oriented mindset Willingness and ability to learn new systems and processes Proficiency in Microsoft Office NetSuite experience is a plus PHYSICAL REQUIREMENTS The physical demands described below are representative of those required to perform the essential functions of this role, with or without reasonable accommodation: Regularly sit and stand Use hands and arms to operate computers and manufacturing-related equipment Lift, grasp, pinch, and handle products and supplies Reach overhead, across, and downward to retrieve materials Ability to see, speak, and hear clearly Occasionally lift or move up to 20 pounds The physical demands described here are representative of those that must be met by any employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals to perform those essential functions. Note: This job description is not meant to be all-inclusive. Employee may be required to perform other duties to meet the ongoing needs of the organization. Filson and Shinola are equal opportunity employers. We believe that every employee has the right to work in surroundings which are free from all forms of unlawful discrimination. It is our policy that all decisions involving any aspect of the employment relationship will be made without regard to race, color, sex, religion, age, national origin, marital status, sexual orientation, gender identity, the presence of any sensory, mental, or physical disability, veteran and military status, genetic information, political ideology or any other status or characteristic protected by local, state or federal law. Discrimination and/or harassment based on any of those factors are totally inconsistent with our philosophy of doing business and will not be tolerated. With regard to applicants or employees with disabilities, the company offers what the law refers to as "reasonable accommodation" to enable a person to perform his or her job. Salary range:$22-$26 USD

Full-time Description The Cascade PBS's mission is to inform and inspire our community to make the world a better place. Our vision is to be the most essential and relevant media organization in the region. Perform technical production to create live, studio, taped and remote productions to reach more people, build a great organization and inspire a smarter world while demonstrating Cascade PBS's values of integrity, community, innovation and diversity. Hourly rate: $29.27-$30.50 Status: Full Time Location: Seattle KEY RESPONSIBILITIES/DUTIES Perform technical production-related duties including lighting, floor direction, switching, camera operation, audio, electronic graphics, teleprompter, make up, set construction and dressing Coordinate the technical functions of television broadcast production for live, studio recorded and remote productions, EFP field recordings and audio sweetening Set up and serve as technical facilitator for teleconferences and other station meetings and events Creates and arranges sets and seating for production, events, and meetings Advise producers, directors and clients to optimize capabilities of production equipment Identify and report faulty equipment, technical procedure problems and personnel problems Properly store production equipment Assist with inventory of television production equipment Assign tasks and coordinate the logistics of the production or project Train Supplemental employees to operate teleprompter and cameras, construct sets, and setup Direct the work of Production Technician I and II and Supplemental team members Act as Production Crew Chief for studio and remote productions, ensure tasks are completed according to plan and within established guidelines Identify and address any issues that arise during the production process Maintain a safe working environment, adhering to safety procedures Ensure the work meets the required standards Collaborate with other team members to foster a positive and productive culture and contribute toward the overall growth of Cascade PBS. Other duties, responsibilities and activities may change or be assigned at any time with or without notice REQUIRED SKILLS/ABILITIES Advanced working knowledge of camera operation, teleprompter, studio set-up, lighting, Electronic Graphics (EG), audio, lighting, switching and computer systems, software and hardware, required EDUCATION AND EXPERIENCE AA degree from an accredited technical school or equivalent experience required Two years' experience as a Production Technician II or equivalent position required PHYSICAL REQUIREMENTS Ability to lift, carry, push, and pull 50 pounds required Ability to climb, twist, bend, kneel, crawl and reach above head required Ability to use a variety of hand tools, power tools and various machines Ability to work some evenings, weekends and holidays Ability to sit or stand for extended periods Must have a valid driver's license or reliable means of transportation to meet requirements of the job Travel to various locations for field assignments (Terms and conditions covered by IBEW Agreement) The hiring process for this role will include a phone screen and a virtual or in-person panel interview. In some instances, additional panel interviews may take place. If you need reasonable accommodation during the job application or interview process, please contact us at ************** . Salary Description $29.27-$30.50 Per hour

Seattle, USA Type: Permanent Apply Share Job title: Technical Operations Center (TOC) Operator Our Company We're more than just a workplace - we're a community of people who care about doing meaningful work, supporting each other, and growing together. Whether you're just starting out or looking to take the next step in your career, we believe in creating roles that energise, challenge, and inspire. We're committed to designing jobs that are sustainable, flexible, and aligned with your strengths - because we know that when work works for people, people do their best work. Visit our Careers Portal to explore our culture, benefits, and current opportunities. You'll find stories from our people and insights into how we work. A brief summary We are looking for a skilled Technical Operations Center (TOC) Operator to join our team to ensure broadcast quality and connectivity is maintained to the highest operational level. The TOC Operator will provide critical responses in a dynamic broadcasting environment and will work as part of a high performing Global team in a collaborative manner. They will work with the wider Engineering and Operations team using the very latest technology managing platform channels, ensuring the correct ad insertion rotation, and QC'ing the distribution paths for remote partners across a cloud-based infrastructure. The ideal candidate will need to be a clear and confident communicator, be able to adapt quickly to on-air changes and remain calm under pressure. Their aim will be to ensure the highest quality visual presentation that informs and inspires viewers and audiences from all around the world. An ability to focus and maintain concentration while being flexible to problem solve is key. In this role, the TOC Operator will be an integral part of the organization's TOC team and will work under the guidance of the TOC Lead while reporting to the Service Delivery Manager. The position is based in the greater Seattle area. The position may require international travel on occasion. The successful candidate will be assigned to the Remote Broadcast Center owned and operated by Riot Games. They will work across the Riot Games' Esport broadcasts featuring championships and tournaments from titles: League of Legends, Wild Rift and Valorant. The TOC Operator will be working with the latest technology in the most advanced Remote Broadcast Center in the World. What you'll be responsible for * Building, configuring, and monitoring complex OTT distribution workflows for remote partners, Costreamers, public platforms, and any other distribution partner worldwide. * Platform channel management, ad insertion during live events and chat moderator assignment. * Critical assessment of video and audio contribution feeds, proactive monitoring with rapid action to restore service using pre-defined emergency procedures. * Rebroadcasts with the insertion of adverts on partner platforms. * Maintain accurate and timely entries into the event's log throughout the event. * Monitoring of all transmission equipment and software, escalating faults accordingly. * Assist with Media tagging and other departmental tasks outside of show times. * Managing the inbuilt system redundancy to ensure that minimum disruption to services is caused by equipment failures. • Assist with other departmental tasks outside of show times. * Update and maintain all SOPs and contribute to new SOPs and the sharing of business/skill knowledge. * Performing regular reporting on performance of the Centers by identifying and tracking data for KPIs. * Imparting skill and knowledge to co-workers and colleagues. * Perform other job-related duties as assigned. This role is for you if Required Qualifications * 3+ years proven experience with video transmission, encoding and decoding, a Technical Operations Center, or Broadcast Master Control environment. * Knowledge of cloud-based and on-prem live streaming, encoding, and packaging solutions. * An understanding of the conversion of baseband video to a compressed video format to facilitate delivery across a variety of networks and platforms. * Experience in a live event production operation environment, preferably sports. * Background working with cloud-based and file-accelerated media upload applications. * Experience with OTT monitoring and compliance. * Fundamental understanding of IT networking infrastructure. * Detailed operational knowledge of tools used to diagnose issues with video and audio feeds, including waveform monitors and audio monitoring units. Salary Range: $33.65 To $40.87 Hourly Apply Share Back to vacancies

We are looking for skilled hydraulic mechanics to join our day shift team. This role requires you to disassemble, assemble, and test hydraulic components. Enjoy working indoors with a positive and friendly group of coworkers. Why You'll Love Working at TERREPOWER: No weekends! Enjoy your weekends free. 401K with 5% company match to secure your future. 11 company-paid holidays to celebrate and relax. Generous vacation and PTO to recharge. Competitive pay that values your skills. Birthday acknowledgment to make your special day even better. Summer company picnic for fun in the sun. Company holiday party to celebrate the season. Positive team environment where you can thrive. Job Responsibilities: Inspect, diagnose, and perform major and minor repair work on hydraulic pumps, motors, valves and other related hydraulic equipment and assemblies. Operates a variety of hand, electric, and air-driven tools as well as a variety of diagnostic instruments. Tests, troubleshoots, services and repairs mechanical equipment. Inspects, adjusts, and replaces necessary parts in the performance of repair and maintenance. Ability to write-up failure reports and bill of materials (BOMs). Performs other duties as assigned. Qualifications: Thorough knowledge of mechanics; considerable knowledge of hydraulics, pumps, and valves Working knowledge of the hazards and safety precautions common to a shop working environments. Working knowledge of the practices, methods, materials, and tools used in modern equipment maintenance. Skill in operation of necessary tools and equipment Ability to diagnose and repair a variety of mechanical problems with hydraulic components and equipment. Carry out assigned projects to their completion. Communicate effectively in English verbally and in writing. Lift 30 pounds Shift: Monday - Friday 7:00am - 3:30pm Pay: $26.00 - $32.00 DOE Benefits: This position offers vacation, PTO and paid holidays. In addition, full-time employees are eligible to elect medical/dental/vision and participate in the company 401K plan.

Jumpstart Your Career in Composite Manufacturing! We're looking for motivated individuals to join our team and learn the fundamentals of composite production in one of four key areas: Resin, Filming, Prepreg, or Finishing. This entry-level role is designed to give you hands-on experience with production machinery, including setup, safe operation, monitoring, and basic maintenance. You'll receive training on quality control standards and gain the skills needed to advance into higher-level roles. If you're eager to learn, ready to work with a supportive team, and looking to build a career in manufacturing, this is your opportunity! Pay Scale Range **$3.00/hr shift premium for night shift hours (5:45pm - 6:00am) Starting $24.00 12 - Months $25.20 24 - Months $26.46 36 - Months $27.78 48 - Months $29.17 60 - Months $34.92 Please note: To be considered for this opportunity, we kindly ask that you complete the required assessment after submitting your application*** 2-2-3 Schedule from 5:45am to 6:00pm (Day Shift) / 5:45pm - 6:00am (Night Shift) - Perform, in a learning capacity, various job duties and tasks in one of four areas of composite production/manufacturing process (Resin, Filming, Prepreg, Finishing/Packing). Acquire skills in production machinery set-up, safe operation, monitoring and preventative maintenance. Train to identify accepted quality control standards. Acquire skills to promote into higher job classification levels. May move/transport materials. Generally, will not remain in this job classification for more than one year. Essential Functions/Major Responsibilities: Set up and validate production machinery for proper operation. Assist with machine operation to ensure smooth and efficient running and production of quality products. Utilize a variety of hand tools to accomplish primary job functions. Obtain materials required for production run. Learn to operate production equipment computer interface and process monitoring systems. Assist in the inspection of products during production runs. Perform job tasks according to schedules using established safe methods and processes. Work with others to achieve an atmosphere of teamwork and continuous improvement. Clean machine to ensure proper running and operation. Create and/or complete necessary production related paperwork. Additional Functions Participate in shift turnover process. Maintain work area(s) in a clean and orderly condition. Operate equipment including forklift, hoist, etc. to move materials and supplies. Participate in team meetings. Perform other related production duties as assigned. This job description in no way implies that these are the only duties to be performed by the Associate. At all times, Associates will be required to follow instructions and to perform any other duties within this or a higher/lower level job upon request of the supervisor. Skills and Specifications • Job tasks are carried out in an environment that consists of recurring work situations with occasional variations from the norm. Job assignments usually involve a moderate degree of complexity or difficulty. Typically operate from established and well-known written procedures or instructions. Perform work assignments independently with a moderate level of supervision. Errors in work or judgment can cause delays and/or add to material costs. • Ability to evaluate conditions; recognize safety and quality issues; and recommend best course of action. • Requires the ability to set priorities based upon pre-determined schedules. • Ability to troubleshoot and problem solve at an intermediate level. • Ability to provide a high level of customer service to internal customers. • Generally, will be assigned to one of four production areas. • Ability to operate one or more types of customized production equipment to manufacture company products. • Ability to maintain “QA Delegated Inspector” status and other area Production Certifications as required. • Ability to operate power equipment such as forklifts, hoists, unicorn, etc., and to utilize a variety of hand tools and measuring devices. • Ability to exert hand/arm strength to lift, push, pull, or carry objects. • Ability to utilize/operate a computer, peripheral equipment and applicable software. • Possess knowledge of production standards and specifications and ability to accurately perform data entry of inputs and outputs. • Position requires the ability to read and understand diagrams. • Knowledge of safety techniques, practices and procedures for handling hazardous materials. • Possess knowledge of record keeping techniques and procedures Education/Experience High school degree or GED required. Previous production experience desired Requirements: Mental and Physical Requirements, Position requires the ability to read, write, speak and understand English at a level necessary to successfully perform assigned responsibilities. Ability to utilize interpersonal and teamwork skills, perform basic mathematical computations, follow directions and to understand and apply work specifications in the completion of work tasks. The ability to hear, speak, use hands/fingers and the repetitive motions of hands/wrists is frequent. Ability to occasionally lift up to 40 pounds. Job requires the ability to stand for up to 12 hours. Vision abilities require the adjustment and focus of sight. Ability to be physically mobile and to climb stairs. Ability to wear personal protective equipment for extended periods of time. Ability to be respirator fit and wear respirator if required. Must be able to perform the essential functions of the job with or without accommodation. Education/Experience High school degree or GED required. Compliance with US Export Control Regulations: This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). In order to comply with these regulations, applicants for employment must be a “U.S. Person” as defined by the ITAR and/or EAR. The definition of “US Person” includes U.S. citizen or national, U.S. permanent resident, or lawfully admitted into the U.S. as a refugee or granted asylum. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Position requires the ability to read, write, speak and understand English at a level necessary to successfully perform assigned responsibilities. Position frequently requires the ability to make quick decisions related to the area's processes. Ability to utilize interpersonal and teamwork skills, perform basic mathematical computations, follow directions and to understand and apply work specifications in the completion of work tasks. The ability to hear, speak, use hands/fingers and the repetitive motions of hands/wrists are frequent. Ability to exert hand/arm strength to lift, push, pull, or carry objects. Ability to occasionally lift 40 pounds. Job requires the ability to stand for up to 12 hours. Vision abilities require the adjustment and focus of sight. Ability to be physically mobile and to climb stairs. Ability to wear personal protective equipment for extended periods of time. Ability to be respirator fit and wear a respirator if required. Must be able to perform essential functions of the position with or without accommodation. Job tasks are usually performed in a production environment. Occasional exposure to a wide range of temperatures. Works with potentially hazardous materials including epoxy resins and/or components. May be required to wear personal protective equipment for extended periods of time. Position requires the ability to work a rotating or fixed non-standard schedule which includes nights and weekends. Position frequently requires work in excess of 40 hours in a week. Position requires the ability to stand for up to 12 hours and move throughout the production area. Toray Composite Materials America Benefits Coverage for Health Benefits start the first day of the month after hire date. Medical and RX- Regence Blue Cross Vision Coverage- VSP Dental Coverage - Delta Dental Flexible Spending Accounts (FSA) 80 Hours of Vacation Time Off annually to start (granted) 64 Hours of Personal Time Off annually (accrued) 3 Paid Floating Holidays Annually (employee can schedule at their choice) Jan 1 - Mar 31: 3 FH's Apr 1 - Jun 30: 2 FH's Jul 1 - Sept 30: 1 FH Hired 10/1 or after, 0 FH's New Hires - floating holidays available after 90 days complete as per date hired: 8 Paid Company Recognized Holidays Life Insurance- pays your beneficiary twice your annual salary Accidental Death & Dismemberment Insurance- pays your beneficiary twice your annual salary Short/Long Term Disability Voluntary Supplemental Life Insurance Tuition Reimbursement Assistance (after 12 months of employment) Toray Corporate Perks John Hancock 401K -CMA matches 50% of first 8% of your contribution Service Awards @ 3, 5, 10, 15, 20, 25 and 30 years Recognition Awards Annual Discretionary Bonus Program #INDCMA

Primo Brands is a leading branded beverage company in North America with a focus on healthy hydration. We are proud to offer an extensive and iconic portfolio of highly recognizable, sustainably sourced, and conveniently packaged branded beverages distributed across more than 150,000 retail outlets. If you are a current associate of Primo Brands, please apply here **Pay Rate: $24.00/hour** **Location: Kent, WA** Needed flexibility to work overtime and weekends based on business needs Benefits of working for Primo Brands: **Health Benefits:** Medical, prescription, dental, vision, flexible spending account (FSA), dependent care flexible spending account (FSA), health savings account (HSA) **Retirement/Investing:** 401K with a 5% match, Employee Stock Purchase Plan (ESPP) **Insurance:** Employee Life Insurance, short and long-term disability, critical illness, hospital indemnity, accident insurance, spouse/domestic partner/child life insurance, accidental death and dismemberment **Other great benefits:** Employee discounts, save on auto, home, and pet insurance, tuition reimbursement, paid vacation and sick time, 9 paid holidays and 3 paid floating holidays, paid leave for when you have a baby, adopt a child, or become a foster parent, legal services, identity theft protection, employee assistance program (EAP), adoption reimbursement benefit, FEDlogic, commuter benefits Responsibilities + This position is responsible for the efficient operation of designated production equipment as assigned. + Responsible for start-up, operation, change over, shut down and preventative maintenance of assigned production equipment. Equipment may include production line equipment, forklifts or other power equipment. + Operate all assigned equipment safely and efficiently following the Company Safety Policy, including the lock out/tag out process. + Perform manual tasks such as: loading and supplying production line items, reworking product and loading conveyors. + Quality Assurance and testing compliance according to Company and/or designated facility standards. + Provide general plant, production line and facility clean up (5S). Qualifications + Must be 18 years of age or older. + Production experience, preferably in a food and beverage environment. + Focus on safe work practices and high quality while executing duties with a sense of urgency. + Work efficiently self-directed or in a team environment. + Physically able to safely lift bottles and equipment weighing up to 50 pounds. + Forklift experience (required in some locations). + Ability to work flexible hours and occasional weekends (depending on location). + Ability to inspect materials visually and by sense of smell. + PPE Required (safety shoes, hair nets, goggles, ear plugs). + Ability to work in a fast-paced environment. + Regularly works around moving mechanical parts and in outside conditions (depending on location) that include inclement weather, heat, and humidity. The noise level may be loud at times. Primo Brands' established portfolio includes billion-dollar brands Poland Spring and Pure Life , premium brands like Saratoga and Mountain Valley , regional leaders such as Arrowhead , Deer Park , Ice Mountain Ozarka , and Zephyrhills , purified brands, Primo Water and Sparkletts , and flavored and enhanced brands like Splash and AC+ION . Our extensive direct-to-consumer offerings and industry-leading line-up of innovative water dispensers create consumer connectivity through recurring water purchases across Water Direct, Water Exchange, and Water Refill. At Primo Brands, our more than 11,000 associates are at the heart of what we do and deliver on our mission to provide healthy hydration to consumers wherever, however and whenever they want it. We believe in fostering a respectful culture, which values our associates who are deeply invested in quality hydration, our communities, and the sustainability of our packaging and water sources for generations to come. Primo Brands is proud to be an Equal Opportunity and Affirmative Action employer, seeking to create a welcoming and diverse environment. We do not discriminate based on race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state, and local law. Salary Range Disclaimer: The salary range provided for this position is an approximation based on market research, internal compensation data and the candidate's qualifications and experience. Final salary offers are determined through a comprehensive evaluation of candidate qualifications and may vary depending on factors such as skills, experience, and geographic location of the position. Other components of the compensation package, including benefits and bonuses, will also be considered. We are committed to fair and equitable compensation practices, and we encourage open dialogue about compensation during the interview process. Candidates must possess strong English language skills to effectively communicate with customers and provide exceptional service. Proficiency in English is essential for understanding customer needs, resolving inquiries, and collaborating with team members.

Jumpstart Your Career in Composite Manufacturing! We're looking for motivated individuals to join our team and learn the fundamentals of composite production in one of four key areas: Resin, Filming, Prepreg, or Finishing. This entry-level role is designed to give you hands-on experience with production machinery, including setup, safe operation, monitoring, and basic maintenance. You'll receive training on quality control standards and gain the skills needed to advance into higher-level roles. If you're eager to learn, ready to work with a supportive team, and looking to build a career in manufacturing, this is your opportunity! Pay Scale Range $3.00/hr shift premium for night shift hours (5:45pm - 6:00am) Starting $24.00 12 - Months $25.20 24 - Months $26.46 36 - Months $27.78 48 - Months $29.17 60 - Months $34.92 Please note: To be considered for this opportunity, we kindly ask that you complete the required assessment after submitting your application* 2-2-3 Schedule from 5:45am to 6:00pm (Day Shift) / 5:45pm - 6:00am (Night Shift) - Perform, in a learning capacity, various job duties and tasks in one of four areas of composite production/manufacturing process (Resin, Filming, Prepreg, Finishing/Packing). Acquire skills in production machinery set-up, safe operation, monitoring and preventative maintenance. Train to identify accepted quality control standards. Acquire skills to promote into higher job classification levels. May move/transport materials. Generally, will not remain in this job classification for more than one year. Essential Functions/Major Responsibilities: * Set up and validate production machinery for proper operation. * Assist with machine operation to ensure smooth and efficient running and production of quality products. * Utilize a variety of hand tools to accomplish primary job functions. * Obtain materials required for production run. * Learn to operate production equipment computer interface and process monitoring systems. * Assist in the inspection of products during production runs. * Perform job tasks according to schedules using established safe methods and processes. * Work with others to achieve an atmosphere of teamwork and continuous improvement. * Clean machine to ensure proper running and operation. * Create and/or complete necessary production related paperwork. * Additional Functions Participate in shift turnover process. * Maintain work area(s) in a clean and orderly condition. * Operate equipment including forklift, hoist, etc. to move materials and supplies. * Participate in team meetings. * Perform other related production duties as assigned. This job description in no way implies that these are the only duties to be performed by the Associate. * At all times, Associates will be required to follow instructions and to perform any other duties within this or a higher/lower level job upon request of the supervisor. Skills and Specifications * Job tasks are carried out in an environment that consists of recurring work situations with occasional variations from the norm. Job assignments usually involve a moderate degree of complexity or difficulty. Typically operate from established and well-known written procedures or instructions. Perform work assignments independently with a moderate level of supervision. Errors in work or judgment can cause delays and/or add to material costs. * Ability to evaluate conditions; recognize safety and quality issues; and recommend best course of action. * Requires the ability to set priorities based upon pre-determined schedules. * Ability to troubleshoot and problem solve at an intermediate level. * Ability to provide a high level of customer service to internal customers. * Generally, will be assigned to one of four production areas. * Ability to operate one or more types of customized production equipment to manufacture company products. * Ability to maintain "QA Delegated Inspector" status and other area Production Certifications as required. * Ability to operate power equipment such as forklifts, hoists, unicorn, etc., and to utilize a variety of hand tools and measuring devices. * Ability to exert hand/arm strength to lift, push, pull, or carry objects. * Ability to utilize/operate a computer, peripheral equipment and applicable software. * Possess knowledge of production standards and specifications and ability to accurately perform data entry of inputs and outputs. * Position requires the ability to read and understand diagrams. * Knowledge of safety techniques, practices and procedures for handling hazardous materials. * Possess knowledge of record keeping techniques and procedures Education/Experience * High school degree or GED required. * Previous production experience desired Requirements: Mental and Physical Requirements, Position requires the ability to read, write, speak and understand English at a level necessary to successfully perform assigned responsibilities. Ability to utilize interpersonal and teamwork skills, perform basic mathematical computations, follow directions and to understand and apply work specifications in the completion of work tasks. The ability to hear, speak, use hands/fingers and the repetitive motions of hands/wrists is frequent. Ability to occasionally lift up to 40 pounds. Job requires the ability to stand for up to 12 hours. Vision abilities require the adjustment and focus of sight. Ability to be physically mobile and to climb stairs. Ability to wear personal protective equipment for extended periods of time. Ability to be respirator fit and wear respirator if required. Must be able to perform the essential functions of the job with or without accommodation. Education/Experience High school degree or GED required. Compliance with US Export Control Regulations: This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR). In order to comply with these regulations, applicants for employment must be a "U.S. Person" as defined by the ITAR and/or EAR. The definition of "US Person" includes U.S. citizen or national, U.S. permanent resident, or lawfully admitted into the U.S. as a refugee or granted asylum. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Position requires the ability to read, write, speak and understand English at a level necessary to successfully perform assigned responsibilities. Position frequently requires the ability to make quick decisions related to the area's processes. Ability to utilize interpersonal and teamwork skills, perform basic mathematical computations, follow directions and to understand and apply work specifications in the completion of work tasks. The ability to hear, speak, use hands/fingers and the repetitive motions of hands/wrists are frequent. Ability to exert hand/arm strength to lift, push, pull, or carry objects. Ability to occasionally lift 40 pounds. Job requires the ability to stand for up to 12 hours. Vision abilities require the adjustment and focus of sight. Ability to be physically mobile and to climb stairs. Ability to wear personal protective equipment for extended periods of time. Ability to be respirator fit and wear a respirator if required. Must be able to perform essential functions of the position with or without accommodation. Job tasks are usually performed in a production environment. Occasional exposure to a wide range of temperatures. Works with potentially hazardous materials including epoxy resins and/or components. May be required to wear personal protective equipment for extended periods of time. Position requires the ability to work a rotating or fixed non-standard schedule which includes nights and weekends. Position frequently requires work in excess of 40 hours in a week. Position requires the ability to stand for up to 12 hours and move throughout the production area. Toray Composite Materials America Benefits Coverage for Health Benefits start the first day of the month after hire date. * Medical and RX- Regence Blue Cross * Vision Coverage- VSP * Dental Coverage - Delta Dental * Flexible Spending Accounts (FSA) * 80 Hours of Vacation Time Off annually to start (granted) * 64 Hours of Personal Time Off annually (accrued) * 3 Paid Floating Holidays Annually (employee can schedule at their choice) * Jan 1 - Mar 31: 3 FH's * Apr 1 - Jun 30: 2 FH's * Jul 1 - Sept 30: 1 FH * Hired 10/1 or after, 0 FH's * New Hires - floating holidays available after 90 days complete as per date hired: * 8 Paid Company Recognized Holidays * Life Insurance- pays your beneficiary twice your annual salary * Accidental Death & Dismemberment Insurance- pays your beneficiary twice your annual salary * Short/Long Term Disability * Voluntary Supplemental Life Insurance * Tuition Reimbursement Assistance (after 12 months of employment) * Toray Corporate Perks * John Hancock 401K -CMA matches 50% of first 8% of your contribution * Service Awards @ 3, 5, 10, 15, 20, 25 and 30 years * Recognition Awards * Annual Discretionary Bonus Program #INDCMA

Job DescriptionQuality Technician IIRapidly Growing Renewable Energy Company Seattle Area/Relocation Assistance Available$26 per hour, with potential flexibility based on experience Terrific Quality Technician position with a rapidly growing renewable energy company. The position will ensure quality and compliance for products and services manufactured. Previous quality control experience in a fast paced production environment is essential for this role.Responsibilities: Ensure production lines adhere to and comply with legal requirements, standards, and procedures Provide training to productions teams to improve quality control and product excellence Review and interpret blueprints, drawings, and radiographs Perform testing on the production line and propose improvements Collect quality data and provide statistical analysis reports Monitor operations and suggest improvements to processes Qualifications: Prior experience in a fast paced production environment Manufacturing experience within a technical role, experience with PV module is preferred Strong problem solving skills Tech savvy Ability to work collaboratively in a team environment and also independently Equal opportunity employer

At F5, we strive to bring a better digital world to life. Our teams empower organizations across the globe to create, secure, and run applications that enhance how we experience our evolving digital world. We are passionate about cybersecurity, from protecting consumers from fraud to enabling companies to focus on innovation. Everything we do centers around people. That means we obsess over how to make the lives of our customers, and their customers, better. And it means we prioritize a diverse F5 community where each individual can thrive. Do you love learning about new technology and sharing knowledge with others? We are looking for a life long learner that loves to engage others in the learning journey and assist them in succeeding in their role. If this is your passion, then you are the technical trainer we are seeking! Come work at a place where innovation and collaboration come together to explore and support the most exciting missions in the world! Why is this job awesome? This role offers you the advantage to work in technical environment, collaborating with other employees and instructors, to design and deliver extraordinary technical training. It is an opportunity to assist technical employees in honing their technical expertise to help them thrive in our technical support or services organization. This opportunity is perfect for you if you want to share your knowledge by delivering content in multiple and creative ways to a world-wide audience of internal support and consulting team members. Day-to-Day Deliver technical training to support engineers and consultants using both video, lectures and laboratory sessions. Deliver technical content to a global audience both in classroom and virtually. Set up the lab infrastructure to support training content delivery. Participate in course sits, co-teaches, audits, train-the-trainer, and other learning activities to grow technically and to improve your course delivery skills. Develop and update training content and labs based on targeted audience needs. Collaborate with multi-functional SME's to build, develop and improve our technical role-based training content. Test and evaluate training materials to ensure technical accuracy. Act as a domain specialist, to assist other instructors and course developers to ensure compelling and accurate training content. Other responsibilities Adheres to and assists in updating team processes and procedures to ensure the team consistency in adhering to Quality Management System (QMS) standards and processes. Ensures compliance with ISO certification standards to support our outstanding support organization. Knowledge, Skills, and Abilities: Excellent verbal and written skills required with the aptitude to deliver and communicate sophisticated technical topics to internal team members. Experience applying adult learning principles to build an engaging and effective learning environment for your participants. Experience using virtual delivery tools such as Zoom, Teams, or other virtual environments. Capable of acquiring skills to deliver one or more technical training courses within 6 months. Hands-on experience with data center operations including WAN operations, Network Protocols, TCP/IP, OSI Model, operating systems, VMware or equivalent hypervisors and network hardware preferred. Exposure to Network Security (e.g. Web Application Security, AAA, VPN, DDoS, Malware, Application Firewalls, etc) or DevOps tools is a great bonus. Familiar with standard concepts, practices and procedures, and tools used to isolate issue(s) within a particular product area (e.g. Access, Traffic Management, Storage, etc.) Aptitude to build written content and labs in support of upgrade, redesign, or new courses, and experience crafting technical training content is an advantage. Qualifications: BS in Computer Science, Engineering, Adult Education or equivalent working experience. Experience in a support, consulting, training role with at least 5 years in the information technology industry is required. Experience working in cloud‑native or service provider environments, particularly Kubernetes-based platforms, is a plus. The is intended to be a general representation of the responsibilities and requirements of the job. However, the description may not be all-inclusive, and responsibilities and requirements are subject to change. LI-KT1 The Job Description is intended to be a general representation of the responsibilities and requirements of the job. However, the description may not be all-inclusive, and responsibilities and requirements are subject to change. The annual base pay for this position is: $79,200.00 - $118,800.00 F5 maintains broad salary ranges for its roles in order to account for variations in knowledge, skills, experience, geographic locations, and market conditions, as well as to reflect F5's differing products, industries, and lines of business. The pay range referenced is as of the time of the job posting and is subject to change. You may also be offered incentive compensation, bonus, restricted stock units, and benefits. More details about F5's benefits can be found at the following link: ******************************************* . F5 reserves the right to change or terminate any benefit plan without notice. Please note that F5 only contacts candidates through F5 email address (ending with @f5.com) or auto email notification from Workday (ending with f5.com or @myworkday.com). Equal Employment Opportunity It is the policy of F5 to provide equal employment opportunities to all employees and employment applicants without regard to unlawful considerations of race, religion, color, national origin, sex, sexual orientation, gender identity or expression, age, sensory, physical, or mental disability, marital status, veteran or military status, genetic information, or any other classification protected by applicable local, state, or federal laws. This policy applies to all aspects of employment, including, but not limited to, hiring, job assignment, compensation, promotion, benefits, training, discipline, and termination. F5 offers a variety of reasonable accommodations for candidates. Requesting an accommodation is completely voluntary. F5 will assess the need for accommodations in the application process separately from those that may be needed to perform the job. Request by contacting accommodations@f5.com.

JOB DETAILS Base Pay: $23.50 - $25.50 per hour Shift: Day Shift, 6:00 AM - 6:30 PM Shoe Voucher/Reimbursement DUTIES AND RESPONSIBILITIES The Quality Assurance Technician in the Extrusion department ensures that all vinyl profiles produced for window manufacturing meet strict quality standards. This role is responsible for inspecting materials and finished products, performing tests, analyzing data, and working closely with production and engineering teams to resolve quality issues. The QA Technician is critical to maintaining compliance with industry standards and supporting the company's continuous improvement initiatives in vinyl extrusion processes. Inspect vinyl profiles for dimensional accuracy, surface quality, and consistency according to product specifications Conduct regular in-process and final product quality checks, using precision measuring tools (e.g., calipers, micrometers, gauges) Perform material testing on vinyl, including tensile strength, UV resistance, and impact testing, ensuring compliance with industry standards Monitor extrusion lines to ensure consistent quality output, identifying and correcting any deviations from standards Document and analyze quality data using statistical process control (SPC) techniques, presenting findings to management Collaborate with production and engineering teams to identify root causes of defects and develop corrective actions · Maintain up-to-date quality records, including test results, inspection logs, and production reports Participate in process audits and contribute to continuous improvement efforts for optimizing the extrusion process Assist with maintaining and improving the company's quality management system (QMS) in compliance with ISO 9001 or other relevant standards Ensure that all products meet safety, regulatory, and customer specifications before shipment Qualifications High school diploma or equivalent Associate degree or technical diploma in manufacturing, engineering, or a related field (preferred) Certification in quality control (e.g., Certified Quality Technician, Six Sigma certification) is a plus 1-3 years of experience in quality control/assurance in a manufacturing environment, preferably in vinyl extrusion or window manufacturing Familiarity with extrusion processes, vinyl materials, and window profile standards Experience with statistical process control (SPC) and data analysis tools in a manufacturing setting Proficiency in using precision measuring tools such as micrometers, calipers, and gauges for product inspection Familiarity with ISO standards (e.g., ISO 9001) and quality management systems (QMS) Understanding of material properties related to vinyl, including UV and thermal resistance Experience with blueprint reading, including specifications for window profiles and dimensions Proficiency with quality control software and data entry tools Attention to Detail: Ability to identify defects such as surface imperfections, incorrect dimensions, or inconsistencies in vinyl profiles Problem-Solving: Strong analytical skills for identifying root causes of quality issues and developing corrective measures Communication: Ability to communicate findings clearly and work effectively with production, engineering, and quality teams Data Analysis: Ability to collect, interpret, and present quality data to support decision-making Time Management: Ability to prioritize tasks and maintain efficiency in a fast-paced manufacturing environment Computer Skills: Basic knowledge of Microsoft Office (Word, Excel, Outlook) for reporting and documentation purposes Ability to stand for extended periods Ability to lift up to 50 pounds on a continual basis above shoulder height and below the waist Comfortable working in a manufacturing floor environment with exposure to noise, heat, and moving machinery Additional Information Site Address: 5001 D Street NW Auburn, WA, 98001 All your information will be kept confidential according to EEO guidelines. Why work for Cornerstone Building Brands? Our teams are at the heart of our purpose to positively contribute to the communities where we live, work and play . Full-time* team members receive** medical, dental and vision benefits starting day 1. Other benefits include PTO, paid holidays, FSA, life insurance, LTD, STD, 401k, EAP, discount programs, tuition reimbursement, training, and professional development. *Full-time is defined as regularly working 30+ hours per week. **Union programs may vary depending on the collective bargaining agreement. Cornerstone Building Brands is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, pregnancy, genetic information, disability, or status as a protected veteran. You can find the Equal Employment Opportunity Poster here . You can also view Your Right to Work Poster here along with This Organizations Participation in E-Verify Poster here . If you'd like to view a copy of the company's affirmative action plan for protected veterans or individuals with disabilities or policy statement, please contact Human Resources at ************ or [email protected] . If you have a disability and you believe that you need a reasonable accommodation in order to search for a job opening or to submit an online application, please contact Human Resources at ************ or [email protected] . This email is used exclusively to assist disabled job seekers whose disability prevents them from being able to apply online. Only emails received for this purpose will be returned. Messages left for other purposes, such as following up on an application or technical issues not related to a disability, will not receive a response. All your information will be kept confidential according to EEO guidelines. California Consumer Privacy Act (CCPA) of 2018 Must be at least 18 years of age to apply. Notice of Recruitment Fraud We have been made aware of multiple scams whereby unauthorized individuals are using Cornerstone Building Brand's name and logo to solicit potential job-seekers for employment. In some cases, job-seekers are being contacted directly, both by phone and e-mail. In other instances, these unauthorized individuals are placing advertisements for fake positions with both legitimate websites and fabricated ones. These individuals are typically promising high-paying jobs with the requirement that the job-seeker send money to pay for things such as visa applications or processing fees. Please be advised that Cornerstone Building Brands will never ask potential job-seekers for any sort of advance payment or bank account information as part of the recruiting or hiring process.

Technician Electromechanical (Aviation) Status: Non-Exempt Department: Electromechanical Shop (1131) Schedule: Monday-Friday, 5:55AM-2:30PM (40 hours/week), subject to overtime This position is primarily responsible for the repair/overhaul of pneumatic/electrical operated aircraft components. The position cross-trains in other departments. The position requires the ability to read/write/understand the English language, following directions, and work in various teamwork settings. ESSENTIAL DUTIES AND RESPONSIBILITIES: * Test, disassemble, inspect, repair and reassemble aircraft components. * Work overtime and holidays on a short notice. * Follow customers special instructions and requirements. * Follow all company procedures and policies. * Follow all safety and security policies and regulations. * Back up department functions, cross-train in other departments and performs other duties as necessary. * Report to work on a regular and consistent basis. REQUIRED ABILITY TO: * Read and understand component maintenance/overhaul manuals. * Read and understand drawings, wiring schematics and flow diagrams. * Be a reliable self-starter. * Demonstrate the use of common hand tools. * Demonstrate the use of torque wrenches, micrometers, dial calipers and multi-meters. * Stand and work for long periods of time. * Lift, move, push and pull up to fifty (50) lbs. on a consistent basis. * Demonstrate good verbal and written communication skills in English. * Build alliances, partnerships and collaborate with co-workers in a tactful, professional and respectful manner. Be a team player with strong interpersonal skills. * Resolve workplace differences and conflict to achieve goals and objectives in a professional manner. * Foster an atmosphere of new ideas, input and creative solutions when faced with challenges. * Listen to others attentively and retain/process information effectively. * Promote a professional culture that is trustworthy, honest, and socially responsible while championing an energetic and positive work culture. REQUIRED EDUCATION/EXPERIENCE: * High School degree or equivalent. * Valid drivers license and good driving record. * This position requires drug testing and criminal background check in accordance with FAA regulations. * Must be legally authorized to work in the United States. * 6 months + of mechanical experience. DESIRED EDUCATION/EXPERIENCE: * Airframe or Airframe and Powerplant license. * 1 year + of experience of electro-mechanical experience. WORKING CONDITIONS: * Continuous work in manufacturing/production setting. * Continuous walking and standing, and lifting, pushing and pulling heavy objects throughout the work day. * Flexibility to work additional hours and occasional weekends.

The primary function of the BAG (Bulk Atmospheric Gases) Production tech position is to ensure safe and reliable operation of the Fife Air Separation Plant. Utilizing plant operations knowledge, the BAG Production tech works in a team environment where individuals are empowered to set priorities and complete different activities with minimal supervision. Primary Responsibilities: Successful candidates must be able to understand principles of the Hazardous Work Permit and Lock Out Tag Out as well as compliance with all Government and Linde Environmental Permits, Regulations and Policies. This is a full-time position in Fife, Washington. This is a 10-hour Shift position M-Th or Tues-Fri, with an on-call rotation starting approximately 8 months after hiring. Follow safe work permit processes, policies and procedures Assist in the training and development of new employees Understand Production KPIs and work towards achieving these goals Understand the theoretical aspects of the process and adjust controls toward achieving desired flows, pressures, and purities Understand the theoretical aspects of the process and adjust controls toward achieving desired flows, pressures, and purities Ensure customer quality requirements are met for ALL products\: maintain Quality Program Understand and Monitor efficiency of equipment\: cooler approaches, water temp rise, and unit efficiency on equipment Understand P&ID and control loop input-output logic Understand and follow all SMP, SOP, COP, OSS, and OPS alerts and Technical Bulletins Understand and resolve fill zone and backup system issues Understand what parameters the analyzer must function under (i.e. Reference gas flows, product gas flows) Understand and conduct water tests on cooling tower and boilers\: make the necessary adjustments needed to keep control Maintain building and grounds equipment Monitor and communicate contractor activities in all areas covered above when required Complete all LMS training modules and OJT for an assigned job per the assigned time line Qualifications: High School Diploma or equivalent is required. Associates in Applied Sciences Degree or equivalent apprenticeship preferred. Previous experience in a continuous chemical operation environment Motivated, self-starter capable of effectively managing multiple tasks and priorities Relevant computer and technical skills Must be able to work overtime and weekends as required Must have strong, written, verbal and interpersonal communication skills Must have a current and valid driver's license Must be able to meet the physical demands of the job Lift 50 pounds Climb stairs and ladders Work in tight and closed spaces Be able to wear all required personal protective equipment About Linde: Linde is a leading global industrial gases and engineering company with 2024 sales of $33 billion. We live our mission of making our world more productive every day by providing high-quality solutions, technologies and services which are making our customers more successful and helping to sustain and protect our planet. Culture: At Linde, we strive to create a work environment that treats all employees with respect, supports new thoughts and ideas, encourages growth and development, celebrates our differences, and embraces inclusion. Linde is committed to remaining an employer of choice for the diverse, ever-increasing pool of global talent. For more information about the company and its products and services, please visit ************** Salary: Pay commensurate with experience. Open to salary range $62,948 - $92,323. Benefits: Linde Gases US offers competitive compensation and an outstanding benefits package. Enjoy access to health, dental, disability, and life insurance, paid holidays and vacation, 401(k) matching, pension benefits, an employee discount program, and opportunities for educational and professional growth. Additional compensation may vary depending on the position and organizational level. Build your future with us while making an impact every day! All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, disability, protected veteran status, pregnancy, sexual orientation, gender identity or expression, or any other reason prohibited by applicable law. #LI-NB1

In 1897 C.C. Filson began outfitting prospectors headed for the Gold Rush with tools and apparel strong enough for the toughest spots on earth. More than 100 years later, Filson remains committed to providing pioneers of all fields around the world with unfailing goods made from the highest quality materials available. Filson recognizes that it takes a world-class team to make a world-class product. As we build on the Filson legacy of American craftsmanship, we are looking for individuals who share our dedication to innovation, excellence, and superior customer service. We don't work in silos but rely on open collaboration. It's a jackknife mentality - the ability to accomplish more than what's asked of you - that defines our culture of versatility and perseverance. Our outfitter mindset is deliberate and strategic. We are a small company, on purpose. We're the ones doing the work, from product design and marketing, to cutting, sewing, and restoration. With more than 125 years under our belt, we still have a start-up mentality. Driven by an independent spirit and an uncompromising attitude that demands we lead with conviction. ABOUT THE ROLE The Manufacturing Prep Specialist supports Filson's production operations by managing pre-production and post-production processes that enable efficient cutting, assembly, audit, and outbound shipment of finished goods. This role plays a key part in ensuring accuracy, readiness, and flow throughout the manufacturing process. RESPONSIBILITIES Create and print markers using Accumark to support cutting room operations Process production work orders and confirm completed units Confirm completed units Prepare completed units for audit Process Transfer Orders for outbound shipments Print Purchase Orders & UPC labels Maintain and update Cuts & Kits Received logs Manage UPC hang tag preparation and tracking Prep finished goods for outbound shipment Assist with outbound shipment packing as needed Perform other duties as assigned QUALIFICATIONS Experience operating or supporting industrial manufacturing equipment Strong attention to detail and accuracy Ability to follow written and verbal instructions Self-motivated with a team-oriented mindset Willingness and ability to learn new systems and processes Proficiency in Microsoft Office NetSuite experience is a plus PHYSICAL REQUIREMENTS The physical demands described below are representative of those required to perform the essential functions of this role, with or without reasonable accommodation: Regularly sit and stand Use hands and arms to operate computers and manufacturing-related equipment Lift, grasp, pinch, and handle products and supplies Reach overhead, across, and downward to retrieve materials Ability to see, speak, and hear clearly Occasionally lift or move up to 20 pounds The physical demands described here are representative of those that must be met by any employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals to perform those essential functions. Note: This job description is not meant to be all-inclusive. Employee may be required to perform other duties to meet the ongoing needs of the organization. Filson and Shinola are equal opportunity employers. We believe that every employee has the right to work in surroundings which are free from all forms of unlawful discrimination. It is our policy that all decisions involving any aspect of the employment relationship will be made without regard to race, color, sex, religion, age, national origin, marital status, sexual orientation, gender identity, the presence of any sensory, mental, or physical disability, veteran and military status, genetic information, political ideology or any other status or characteristic protected by local, state or federal law. Discrimination and/or harassment based on any of those factors are totally inconsistent with our philosophy of doing business and will not be tolerated. With regard to applicants or employees with disabilities, the company offers what the law refers to as "reasonable accommodation" to enable a person to perform his or her job. Salary range:$22-$26 USD

Technician Electromechanical (Aviation) Status: Non-Exempt Department: Electromechanical Shop (1131) Schedule: Monday-Friday, 5:55AM-2:30PM (40 hours/week), subject to overtime SUMMARY: This position is primarily responsible for the repair/overhaul of pneumatic/electrical operated aircraft components. The position cross-trains in other departments. The position requires the ability to read/write/understand the English language, following directions, and work in various teamwork settings. ESSENTIAL DUTIES AND RESPONSIBILITIES: Test, disassemble, inspect, repair and reassemble aircraft components. Work overtime and holidays on a short notice. Follow customer s special instructions and requirements. Follow all company procedures and policies. Follow all safety and security policies and regulations. Back up department functions, cross-train in other departments and performs other duties as necessary. Report to work on a regular and consistent basis. REQUIRED ABILITY TO: Read and understand component maintenance/overhaul manuals. Read and understand drawings, wiring schematics and flow diagrams. Be a reliable self-starter. Demonstrate the use of common hand tools. Demonstrate the use of torque wrenches, micrometers, dial calipers and multi-meters. Stand and work for long periods of time. Lift, move, push and pull up to fifty (50) lbs. on a consistent basis. Demonstrate good verbal and written communication skills in English. Build alliances, partnerships and collaborate with co-workers in a tactful, professional and respectful manner. Be a team player with strong interpersonal skills. Resolve workplace differences and conflict to achieve goals and objectives in a professional manner. Foster an atmosphere of new ideas, input and creative solutions when faced with challenges. Listen to others attentively and retain/process information effectively. Promote a professional culture that is trustworthy, honest, and socially responsible while championing an energetic and positive work culture. REQUIRED EDUCATION/EXPERIENCE: High School degree or equivalent. Valid driver s license and good driving record. This position requires drug testing and criminal background check in accordance with FAA regulations. Must be legally authorized to work in the United States. 6 months + of mechanical experience. DESIRED EDUCATION/EXPERIENCE: Airframe or Airframe and Powerplant license. 1 year + of experience of electro-mechanical experience. WORKING CONDITIONS: Continuous work in manufacturing/production setting. Continuous walking and standing, and lifting, pushing and pulling heavy objects throughout the work day. Flexibility to work additional hours and occasional weekends.