Field Engineer jobs at MasTec

The Electrical Engineer is responsible for all electronic control, radio communication, monitoring systems, and components including computer-related hardware and software. Benefits * Medical * Dental * Vision * Employer Paid & Voluntary Life Insurance * 401(k) Employer Match plus Annual Profit-Sharing Contributions * Paid Vacation, Sick Time & Holidays * Employer Paid Disability Plan * Employee Assistance Program * CalPortland is proud to offer a comprehensive, competitive benefits package that provides health and financial support to our most important resources: our employees. Your benefits are an important part of your overall compensation at CalPortland. That's why we give you a wide range of benefits to choose from. • Medical, Dental, Vision o low-cost premiums even for family coverage • Company-paid life/AD&D insurance • Company-paid short-term disability • Paid sick/vacation/holiday • 401k/Company Funded Pension Program (program is dependent upon location and job type) • Employee Assistance Program (EAP) • Additional voluntary benefits Compensation $95,000 to $105,000 Depending on Experience Responsibilities Ability to assist and support the Plant Automation Engineer with the operation, maintenance, and programming of all plant instrument/analyzer systems including logic, analog and graphics, and all other technology that may be acquired Assist in the maintenance of instrument/analyzer/electrical systems, server-based high-level analyzer systems, and data historians such as OSI Pi, FLS ECS/QCX; assist CIS with the maintenance of corporate IT network Work with the plant's team to develop new control systems applications for projects Work with the energy team to identify improvements and participate in energy audits Assist with all aspects of capital projects including sizing of conductors and protective devices; load calculations for new and existing power systems in preparation for additions, changes, and capital projects interconnecting to the plant electrical system Identify worn and defective components as well as appropriate replacements; provide field inspections and supervision for electrical work on projects Support plant by diagnosing and correcting electrical problems Provide technical and safety training to Plant Electricians Complete design and drawing updates for replacement components Ability to apply corporate standards to designs and solutions suggested/implemented; use new technologies at the plant such as smart MCCs, including design, training of electricians, and updating documentation/diagnostic systems Replace or upgrade worn and depreciated components; design, change, and modify instrument/analyzer systems Create and submit capital proposals Education Bachelor of Science degree in Engineering Requirements/Qualifications Willing and able to work flexible hours as needed to maintain plant instrument/analyzer systems Must be a self-starter and be able to work independently Ability to maintain skills as necessary to keep pace with the ever-changing and improving technology for plant instrument/analyzer systems Strong communications and management skills - will work with, direct, assist and/or follow vendor services for troubleshooting and maintenance of all instrument/analyzer systems Troubleshooting skills and critical thinking are a must Ability to read and edit process flow drawings; the ability to read and create logic decision charts Ability to travel - required to travel to company facilities and other meeting locations on occasion Must be able to work cooperatively with plant and corporate personnel Preferred: Prior experience in computer automated control and instrumentation and/or cement production processes Knowledge of National Electrical Code (NEC) Understanding of instrument/analyzer system fundamentals Power distribution systems, relays, medium volt switchgear, instrumentation, PLC's, VFD's, etc. Conditions of Employment Successful candidate must submit to a post-offer pre-employment physical examination, drug/alcohol screen, and background check. Some positions require FMCSA-regulated ongoing drug and alcohol testing. #LI-PW1

About the Role: The Project Engineer will be responsible for coordinating with individuals, managing engineering firms, and following processes and standards to ensure the Company achieves reliable, quality, and safe designs. This person will be responsible for facilitating the design process from conceptual through IFC design. They will be responsible for managing 3rd party engineering firms, working with CSI internal engineering resources, and being the project lead in all aspects of project design. This responsibility will align and work with the construction team to ensure they have the necessary design information, quantities, and parameters to build the work. They will support the project design by ensuring the design meets the contractual, technical, safety, and quality requirement from Client, Company, and Industry Specifications and Standards. This position will have travel and project responsibilities to support the site team and lead design reviews as required. This position will not manage or supervise the construction activities performed on the project site. Company Overview Founded in 1990, CSI has emerged as a leader in highly technical and innovative electrical design and construction. We are a full-service firm with the resources and expertise to handle any commercial, industrial, or one-of-a-kind challenge. We are a trusted contractor to diverse industries, such as aerospace, biotech/pharmaceutical, education, healthcare, entertainment, hospitality, manufacturing, and retail, to name a few. Our services also include energy solutions and have earned a reputation as a premier provider of energy development, installation, and maintenance. In July 2019, CSI proudly joined the MYR Group family expanding our commercial and industrial reach. We're proud to celebrate 31 years of commitment to do all things with excellence for our customers, ourselves, and our craft. We Build Better. Essential Functions Manage and direct multiple 3rd party design firms working towards Issued for Construction Drawings for Electrical, Civil, and Structural designs. Coordinate and lead design reviews at each design milestone. Design reviews will likely include the owner, CSI, and 3rd party personnel. Perform the overall coordination and integration of technical activities in engineering projects and services. Direct and review project designs and technology integration. Work with project managers to facilitate design understanding as the start of construction occurs. Ensure there is understanding of the intent of the design and how the design will be audited throughout the construction phase. Seek opportunities to add value to the project. Perform economic analysis/value engineering to determine cost-effective solutions and prepare written recommendations. Ensure value engineering is incorporated into future designs. Manage 3rd party engineering resources to ensure deadlines are met, and the construction team has the necessary engineering information to produce a quality project on schedule. Maintain and manage engineering schedules and budgets to meet the requirements of the project. Possess a full understanding of time and resource management to achieve the results needed for project deadlines. Review and facilitate approval of materials to be used on the project by attaining Engineer of Record approvals or other resources available. Ensure takeoffs are complete and accurate for material procurement. Nurture and maintain key professional relationships with utilities, owners, engineering firms, energy subject matter experts, and others. Coordinate, lead, and document regularly scheduled calls between applicable parties. Assure projects are designed and constructed according to all applicable safety standards, including ASTM, NESC, NEC, NFPA, etc. Ensure design deliverables are received in time to support procurement and project schedule. Acts as a technical resource for project construction teams. Acts as engineering liaison for the construction team, 3rd party Engineer of Record, Client, and internal engineering resources from award through completion. Responsible for engineering document control process, including client and engineering transmittals, RFI's, and associated logs. Apply for and complete local permits as specified by the contract. Ensure that each design is developed with consideration for efficient installation, maintenance, and repair. Consult Field Operations Manager and Trade Superintendents as necessary for recommendations. Review implications of project design changes and make recommendations Recognize, document, and report cost impacts due to design changes. Share impacts with project management and procurement team. Perform economic analysis/value engineering to determine cost-effective solutions and prepare written recommendations. Train and develop Field Engineers and Field Coordinators in engineering management, document control, and RFI processes. About You: Qualifications BS in Construction Management, Business, or Engineering. Minimum of three years in the solar + BESS EPC, with a strong knowledge of construction sequencing, construction methods, and materials practices, including knowledge of electrical systems. OSHA 30 certification desired, but not mandatory. Registered Professional Engineer (PE) status or qualified to take test desired, but not mandatory. Can be a combination of trade, education, and relevant work experience. Knowledge/Skills/Abilities Proficiency in MS Office Suite (including Microsoft Word, Excel, PowerPoint, and Visio). Database experience is a plus. Experience with Primavera 6 and Microsoft Project scheduling software. Positive and proactive attitude and ability to take initiative. Excellent reasoning skills for identifying strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. Ability to take ownership and accountability, work in a team environment, display leadership skills, work under pressure, and adapt to changing job requirements. Strong leadership abilities and interpersonal, organizational, and communication skills (tact, diplomacy, influence, etc.), both written and verbal. In-depth knowledge of equipment and practices used in solar power plant construction. Knowledge of business and management principles involved in planning, resource allocation, leadership, production methods, and coordination of people/resources. Knowledge and skills of providing best-in-class customer service, including needs assessment, quality, and safety standards, and achieving overall customer satisfaction. Consideration of the relative costs, benefits, and impacts of potential actions to choose the most appropriate one. Ability to ensure the outcome and results from work performed and effective resources. Knowledge of electrical power engineering principles and familiarity with computer and analytical tools related to equipment sizing, load flow, and power quality. Ability to monitor and assess the personal performance and the performance of other individuals or organizations to make improvements or take corrective action. Work Environment Works in the office 70% of the time and on-site 30% of the time May work in varying weather conditions: hot, cold, and wet conditions. What We Offer: Compensation & Benefits Hourly Rate $36.00-$53.00/ hour (Non-Exempt) Commensurate with experience, paid weekly. Posted salary ranges are made in good faith. CSI reserves the right to adjust ranges depending on the selected candidate's qualifications. Amazing Company Culture - We have a culture of trust, teamwork, performance, and commitment that drives our success. Competitive Salaries - We pride ourselves on offering above-average industry salaries based on talent and experience. Annual Paid Time Off starting at 15 days plus 9 paid Holidays. Generous 401(k) Plan with 100% match up to 6%. Immediate vesting and Annual profit-sharing potential. Company-paid life, and accidental death & dismemberment. Employee Assistance Plan (EAP). Various voluntary plans are available, including short- and long-term disability, supplemental vision, accident, hospital and critical illness, and additional voluntary life insurance plans for employees and dependents. Company medical and dental insurance for you and your family. CSI pays 100% for Employee and 75% of dependent coverage premium for the selected plan(s) Position may be subject to pre-employment screening, which may include background check and drug testing. Accessibility: If you need an accommodation as part of the employment process, contact our Employment Hotline at **************. MYR Group, Inc. and our subsidiaries are proud to be Equal Opportunity Employers. We promote diversity of thought, culture, and background, which connects our family of brands. We are committed to a work environment that supports, inspires, and respects all individuals and in which personnel processes are merit-based and applied without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, marital status, age, disability, national or ethnic origin, military service status, or other protected characteristics. We celebrate diversity and are committed to creating an inclusive environment for all employees. MYR Group does not sponsor applicants for work visas. Applicants must be currently authorized to work in the United States for any employer. MYR Group, Inc. and our subsidiaries do not work with any third-party recruiters or agencies without a valid signed agreement and partnership with the Corporate Talent Acquisition Team. Appcast: #applow LinkedIn Workplace: #LI-Onsite

Morrow-Meadows Corporation is seeking a full time Field Engineer. The primary objective of the Field Engineer is to support the Foremen and General Foremen with administrative tasks that will allow the field supervisors the opportunity to spend more of their time in the field supporting the electricians working on their crews. Field Engineer is an entry-level opportunity for candidates who demonstrate a strong desire for a career in Project Management, Electrical Engineering or Construction Management. Responsibilities: Update and maintain as built/record drawings in our electronic document control system Assist Foreman/Safety Engineer with new hire paperwork, orientation, and video Distribute all mail to the Foreman to include copying or emailing scheduled updates etc. Assist material handler with filing and follow-up paperwork such as backorders Assist QA/QC Manager with filing Manage Nevada State license list for journeymen and training numbers for anyone that applies Assist with timekeeping duties for field employees Track tool orders, tool returns, damaged tools and stolen tools Complete daily job journals with input from Foreman Assist with any manual checks and termination slip(s) and send all information to payroll Requirements: Trade related education or industry related experience preferred Excellent computer skills - proficient in Microsoft Office suite Strong organizational skills Self-starter who will offer their skills to improve the documentation processes A good attitude and the ability to work in a team environment Strong communication skills Dependable Benefits: Competitive compensation packages Medical and Dental Benefits Basic Life Insurance Long Term Disability Insurance Flexible Spending Account Wellness Program 401-K Plan that matches up to $6,000 per employee annually 8 paid holidays Your birthday as a paid holiday 3-4 weeks paid vacation/personal time off depending on years of employment Morrow-Meadows Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. The salary range for this position is: $21.00-$30.00/hour. Compensation offered may vary based on work location, experience, qualifications, specialty, training, and market and business considerations, among other factors.

We are looking for a Structures Project Engineer interested in heavy civil construction with 2 to 5 years' experience to join the team on our Tim Bell Road Bridge Replacement Project in Stanislaus County. Myers and Sons has been contracted for a structural project to remove and reconstruct the existing Tim Bell Road Bridge over Dry Creek. The project consists of replacing the existing historical bridge with a combination of a flat slab bridge and parabolic box girder. Work includes large diameter CIDH pile, falsework, trestle and bridge post tensioning. The project is expected to be completed over the course of two seasons. We are looking for a person that can develop a deep understanding of the project documents, including the contract with the owner, subcontracts, cost reports, CPM schedules, specifications, project deliverable documents, correspondence, billings, and related project controls items. This person should feel comfortable navigating and working within accounting and project documentation software such as Vista and be detailed oriented. In addition to office tasks, this person will work closely with the project superintendent to develop and execute work plans and perform construction layout using AutoCAD and Lecia surveying equipment. Key Responsibilities: Work On Site to help solve problems that occur during construction Working within Vista to manage documents Maintain thorough understanding of the contract with the Owner Monitor and report project progress Field work: construction layout, developing grades, and work plans for self-performed work Review and approve project invoices Document control such as submittals, RFI's and Change Orders Qualifications: Bachelor's Degree in Business, Construction Management or Engineering preferred 2 - 5 Years of Experience in highway civil or structures construction projects in California. Experienced dealing with subcontracts, subcontractors and self-perform work Excellent organizational, team management, problem solving, motivational skills. Apply Here: ******************************************************************************* Benefits: Health Insurance (Medical/Dental/Vision)-our company covers 80% of the healthcare cost for our employees and their dependents. Employees are responsible for the remaining 20%, which is pre-taxable. Flexible Spending Account (FSA)/Dependent Care FSA 401K with 8% Match Life insurance Employee Assistance Plan (EAP) Voluntary insurance plans available-Accident/Critical Illness/Cancer/Hospital Indemnity/Life and AD&D Paid time off Professional development assistance Work in a collaborative environment that fosters creativity, support and mutual respect. Myers & Sons Construction is proud to be an equal opportunity and affirmative action employer regardless of race, color, gender, age, sexual orientation, gender identity, religious beliefs, marital status, genetic information, national origin, disability, or protected veteran status

About Us Clayco is a full-service, turnkey real estate development, master planning, architecture, engineering, and construction firm that safely delivers clients across North America the highest quality solutions on time, on budget, and above and beyond expectations. With $5.8 billion in revenue for 2023, Clayco specializes in the "art and science of building," providing fast track, efficient solutions for industrial, commercial, institutional, and residential related building projects. The Role We Want You For The construction Project Engineer will be based on the construction project site and will service our clients in a multi-state region and may even travel across the country. You will have the opportunity to build large, complicated, iconic design-build projects $30 million and above. In this role you will be part of a team responsible for taking projects from conceptual stages through closeout. The Specifics of the Role Build client and subcontractor relationships. Team with Architects, Engineers, and Planners to create and manage a design schedule. Assist in the establishment of project forecasts and budgets. Manage costs. Accept responsibility for project execution. Mentor and develop Interns and new incoming project management staff. Requirements Bachelor's Degree in Construction Management, Engineering, Architecture or related. 0 to 5 years of experience managing construction projects, ideally design-build. Demonstrated knowledge of construction principles, practices, and technology. Previous experience on a successful project management team. Ability to walk a job site, climb ladders, and scale multi-floor scaffolding. Ability to lift objects of at least 50 lbs. Some Things You Should Know This position will service our clients in Phoenix, AZ. Our clients and projects are nationwide - Travel will be required. No other builder can offer the collaborative design-build approach that Clayco does. We work on creative, complex, award-winning, high-profile jobs. The pace is fast! This position is classified as a safety-sensitive role in accordance with applicable state and federal laws. Candidates selected for this position will be subject to a comprehensive background check, which includes mandatory drug testing. Why Clayco? 2024 Best Places to Work - Crain's Chicago Business, St. Louis Business Journal, Los Angeles Business Journal, and Phoenix Business Journal. 2024 ENR Midwest - Midwest Contractor (#1). 2024 ENR Top 100 Design-Build Firms - Design-Build Contractor (Top 5). 2024 ENR Top 100 Green Contractors - Green Contractor (Top 5). Benefits Discretionary Annual Bonus: Subject to company and individual performance. Comprehensive Benefits Package Including: Medical, dental and vision plans, 401k, generous PTO and paid company holidays, employee assistance program, flexible spending accounts, life insurance, disability coverage, learning & development programs and more! Compensation The salary range for this position considers a wide range of factors in making compensation decisions including but not limited to: Education, qualifications, skills, training, experience, certifications, internal equity, and location. Compensation decisions are dependent on the facts and circumstances of each case.

Holaday-Parks' Project Engineers support the successful execution of Design Build and Plan Spec projects from inception to project close out. Project Administrators represent our organization to our customers, other contractors, our employees and our community in a professional manner. They are efficient and highly organized. Essential Functions: Maintain Project Records during all phases of work. Assemble and distribute submittals and O&M's. Create and maintain RFI, CO, ASI and drawing logs. Track Daily Reports. Follow up to ensure RFI's are priced and responded to timely. Ensure punch list items are addressed. Estimating Support: Support estimating efforts as requested by Estimators. Estimating support may include counting fixtures, obtaining quotes from subcontractors and equipment suppliers, and preparing final bids for submission to the customer. Field Support: Project Engineers may be located in the main office or on the job site. When stationed on the job site, the Project Engineer will be responsible for maintaining drawings by incorporating changes and ensuring the correct information is distributed to the field staff. Tracking documentation as described above may be performed in the office or on site. Project Engineers support multiple projects when required. Career Path: The Project Engineer position is an entry level position in the Construction Industry. Experienced Project Engineers may have the opportunity to move into Project Manager roles as openings come available. Qualifications and Education: The preferred candidate will possess excellent oral and written communication skills, outstanding customer service and extraordinary organizational skills. They will have a sense of responsibility and ownership for the project. Four years college-level construction management training preferred; Working knowledge of MS Outlook, Word, Excel required; Experience with Procore, Microsoft Project, and Bluebeam Salary Range: $65,000-80,000 DOE Benefits: Holaday-Parks, Inc., offers an excellent salary and benefits package-paying 100% of medical/vision/dental, and prescription premiums for employees and an employee-centric culture. We also provide company-matching 401K program, and paid holidays/time off. If interested in applying, please submit your cover letter and resume to ************************. Holaday-Parks is an Equal Opportunity Employer (EOE), including protected veterans and people with disabilities

RESPONSIBILITIES INCLUDE Develop complete and thorough understanding of the Contract Documents including drawings, specifications and geotechnical reports Project engineering of civil projects with grading, excavation, shoring and concrete placement Prepare project submittals including construction means and methods Draft and process RFI's Assist with Project schedule and update tasks with information from field team Assist with material procurement and verification process Manage field quality and control cost Assist with equipment tracking and reporting on project Procure small tools / light equipment Assist with invoice reviewing and coding Assist with building the work according to plans and specifications Perform site visits to evaluate site conditions Request and evaluate vendor and subcontractor quotes Prepare take-offs and assist with design calculations Understand and assist with implementing required safety measurements EXPERIENCE AND QUALIFICATIONS BS Degree in Civil Engineering or Construction Management 1 - 2 years of construction field experience Proactive and self motivated Excellent communication and interpersonal skills. Capable of performing and overseeing survey / layout of work Excellent problem solving solutions and critical thinking skills Strong time management skills with ability to respond quickly and effectively under pressure and deadlines Desire to learn and succeed Goal and schedule driven Ability to adapt to changing environments Proficient with Word, Excel, AutoCAD Strong work ethic - willing to do what it takes to get the job done Ability to work independently as well as part of a Team Basic understanding of construction methods Ability to travel to various job sites Valid current Driver's License required Background check and drug screening is required. Must be legally authorized to work in the United States. Buesing Corp does not provide Visa sponsorships. *This is a safety sensitive position.

Come Join Us! From apartments in New York to hospitals and stadiums in Dallas, libraries at prestigious universities to creating modern retail experiences, our teams contribute architectural glass and building products to projects that shape the way people live, work, heal, learn, and play. At OBE, the work of our employees truly matters. With over 6,500 employees, we operate more than 80 manufacturing and distribution facilities in five countries. You can see some of our favorite projects here. Start your journey with OBE and help us build the future. What You'll Get to Do The Capital Project Engineer is focused on developing and implementing capital projects that align with OBE's engineering standards. This role is perfect for an individual who is organized, technically skilled, and a proactive problem solver. A vital member of the Engineering and Operations Team, this is an opportunity to build a career with an industry leader. Job responsibilities include: Researching and producing justification for capital projects Designing and managing capital projects for cost reduction and productivity improvements Engineering equipment with OEMs to meet OBE standards Facilitating project handoff to operations and maintenance teams Supporting process improvements and maintenance operations What We Are Looking For Bachelor of Science in Mechanical or Electrical Engineering or equivalent experience Proficiency in Allen Bradley PLC and HMI programming & troubleshooting Strong computer skills including AutoCAD and MS Office Ability to read and develop controls, wiring, pneumatic, and hydraulic diagrams Experience with Lean manufacturing and Six Sigma concepts (certification desirable) What OBE Offers You Benefits that benefit you - industry competitive benefits at the lowest cost to the employee Work-life balance - PTO and holidays, including floating holidays you can choose Compensation that rewards your hard work - A pay-for-performance culture with potential for annual raises and bonuses Training - We will equip you with the knowledge and skills you need to succeed OBE is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability-If you want to know more, please click on this link. Oldcastle BuildingEnvelope is an E-Verify Employer.

Gray Construction is looking to add a Japanese Speaking Project Engineer with a Mechanical Engineering background to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Gray Construction is looking to add a Japanese Speaking Project Engineer with a Mechanical Engineering background to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

The Equipment Project Engineer supports field operations by ensuring our fleet of heavy construction equipment and asphalt plants are performing safely, efficiently, and reliably. This role provides technical expertise in equipment selection, maintenance, and performance analysis, working closely with project teams to support optimal equipment utilization across Reeves job sites and plants. Key Responsibilities Technical & Operational Support Serve as the technical expert for heavy equipment and plant setup, operation, and performance optimization. Partner with operations, maintenance, and project managers to ensure equipment aligns with project requirements. Assist in equipment mobilization planning for new and ongoing projects. Equipment Maintenance & Diagnostics Conduct field inspections, troubleshoot performance issues, and coordinate repairs with shop and field mechanics. Analyze equipment telematics data to identify trends, prevent downtime, and improve fleet reliability. Support preventive maintenance programs and ensure adherence to manufacturer and company standards. Safety & Compliance Ensure all equipment meets Reeves and Colas safety, quality, and environmental standards. Promote and reinforce a strong safety culture through regular field engagement and operator training. Participate in equipment audits and risk assessments. Data & Reporting Maintain accurate records of equipment usage, inspections, and performance metrics. Provide data-driven recommendations for repairs, replacements, and equipment upgrades. Contribute to continuous improvement initiatives across the Equipment Department. Qualifications Bachelor's degree in Mechanical, Civil, or Construction Engineering - or equivalent technical experience. 2-5 years of experience in construction equipment, fleet management, or field engineering. Strong understanding of heavy equipment systems (hydraulic, mechanical, electrical). Familiarity with equipment telematics, diagnostics, and maintenance management software. Excellent communication, analytical, and problem-solving skills. Ability to travel regularly to project sites. Preferred Skills Experience with major construction equipment (Caterpillar, Komatsu, Volvo, John Deere, etc.). Background in roadway, asphalt, or heavy civil construction. Working knowledge of DOT, OSHA, and environmental compliance standards. Strong computer proficiency (MS Office, equipment management systems). #LI-CW1

All applicants must apply directly through the Clark/Sullivan Construction website (*************************************** Applications through the LinkedIn platform will not be reviewed by the hiring team. Clark/Sullivan Construction (C/S) is currently looking to hire a full-time project engineer to join our Sparks (NV) team. C/S is a multi-state commercial general contractor firm who works on projects that range from highly-complex renovations to brand new ground-up facilities in the healthcare, education and civic markets. If you're someone who enjoys working in a fast-paced industry and learning from a team of highly-skilled and motivated individuals, this could be the perfect job for you! Project Engineer's responsibilities are the following: Manage submittal process Prepare and manage Request for Information process Prepare and assist Project Manager in processing change orders Assist Project Superintendent(s) to maintain document control Coordinate with Superintendent(s) and update schedules Coordinate with design and construction team to update and implement BIM in the field Attend and maintain weekly meeting minutes for Owner/Architect/Contractor meetings Prepare closeout documents for project completion Coordinate with Project Manager establishing monthly Payment Applications Assist in bidding of projects when required. Assist/train administrative assistants to maintain accurate filing system for specific projects. Manage and update contract documents over the course of the project (as-built drawings) Experience Requirements: 2+ Years' Experience in Construction, Engineering, or Architecture Preferred B.S. in Construction Management or Civil Engineering Preferred Experience with Excel & Word Experience with Bluebeam Software Preferred Experience with BIM Software is Desirable Experience with Project Scheduling, Estimating and Project Management Software is Desirable Must Be Able to Pass a Criminal Background Check and a Drug Test Benefits: C/S offers a competitive benefits package, with opportunities for professional growth. These benefits include but are not limited to: • Health Benefits: Comprehensive health, vision, and dental plans. • 401K Program: Including employee matching. • Paid Time Off: 15 days of paid time off plus 9-10 paid holidays, totaling 24-25 paid days off annually. • Salaries & Bonuses: Competitive pay with annual reviews and performance bonuses. • Professional Development: Opportunities for conferences, certifications, continued education and training. • Company Events: Team-building, holiday parties, and special outings. We are an Equal Opportunity Employer. We maintain a drug-free workplace. Candidates will be required to pass a pre-employment drug test as a condition of employment.

Gray Construction is looking to add a Japanese Speaking Project Engineer with a Mechanical Engineering background to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Gray Construction is looking to add a Japanese Speaking Project Engineer with a Mechanical Engineering background to their Charlotte, NC or Atlanta, GA office. Responsibilities Why Gray? Gray is a fully integrated, global service provider deeply rooted in engineering, design, and construction, along with smart manufacturing and equipment manufacturing services. Consistently ranked as a leader in the industry, we focus on the following markets for domestic and international customers: Food & Beverage , Manufacturing , Data Centers , Distribution , Commercial and Advanced Technology . Founded in 1960, Gray has grown to encompass a complementary family of brands designed to augment and enhance each other's specialized capabilities without gaps or redundancies. Our robust offering-which includes strategy, operational improvements, construction, extensive engineering, automation & controls, and equipment manufacturing-enables us to create one-of-a-kind solutions at the highest levels of customization, delivering unmatched precision and partnership to some of the world's most sophisticated organizations. Develop, update and monitor job progress using QMS program, including scheduling, estimating and budgeting to ensure that construction of project parallels with schedule. Perform quantity take off(s), cost estimates and bid solicitation. Provide research options and regulation information as required. Purchase and coordinate the delivery of certain materials for the project(s) ensuring optimum prices, quality and conformance to specifications and budget. Reviews and approves invoices and change orders. Negotiate with subcontractors and vendors for specific trades ensuring that all scope is encompassed. Review vendor and subcontractor shop drawing submittals for construction as directed by the supervisor. Relocate to specific job sites (if required) in order to become familiar with procurement and construction practices. Attend weekly job site meetings. Assist in the preparation of various reports to assist in the successful management of the project(s), such as: monthly red files, progress analysis/schedules, billings and status reports. Assist in the organization and maintenance of job files to ensure continuity of work flow. Submit verbal and written reports on project status to supervisor. Communicate effectively with customer, direct consultants and subcontractors on the project(s). Responsible for the communication, implementation and enforcement of Gray's safety program on site. Other duties may be assigned. Qualifications Bachelor's degree from four-year college or university and a minimum of three years related experience. Must possess basic computer skills including the ability to utilize word processing, spreadsheet and e-mail applications. May also require working knowledge of scheduling applications. The new team member should be an energetic, self-motivated individual who enjoys a team environment, as well as a passion for collaboration and professional development. If you are a high achiever striving to exceed expectations in a fast-paced innovative company, then Gray is the place for you. The requirements listed above are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be physically present in Birmingham office. Physical Demands & Work Environment The physical demands described here are representative of those that must be met by a team member to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this position, the team member is frequently required to stand, walk, sit, use hands and arms, reach, and talk or hear. They are regularly required to climb or balance, stoop, kneel, or crouch. Must frequently lift and/or move up to 25 lbs, and occasionally lift or move up to 100 lbs. Specific vision abilities include accurate near and distant vision. Frequently in a normal office environment where noise level is moderate and temperature/humidity is controlled. Occasionally exposed to wet and/or humid conditions, moving mechanical parts, and outside weather conditions. May be exposed to high, precarious places, fumes or airborne particles, extreme cold and/or heat, risk of electrical shock, explosives and vibrations. Noise level on the job site is normally moderate to loud. Overtime may be required. Some travel may be required. Supervisory Responsibilities Indirectly supervises the activities of subcontractors and field personnel. EEO Disclaimer Gray is proud to be an Equal Opportunity Employer and welcomes everyone to apply. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Redwood Electric is looking for a highly motivated and proactive individual who will be responsible for supporting the Project Manager and Project Team in the day-to-day operations of construction projects. About us Redwood Electric Group is a large business providing electrical construction and design services. We operate throughout the Greater Bay Area with offices in Santa Clara, San Leandro, Vacaville, and Sacramento. At Redwood Electric Group, our philosophy is focused on the commitment to our customers. Their success is a direct reflection of our success. Our business continues to reflect strong growth through innovation and our team's commitment to exceed customer expectations. Responsibilities Duties will include but are not limited to material procurement and tracking, document management, estimating, and client relations. Workload may vary from several small-sized jobs to one large project. Support projects team with day-to-day operations of construction projects. Review project drawings and/or specifications for given projects. Establish and create submittals in conjunction with submittal logs. Assist with the production and/or processing of RFIs. Material procurement including quantity take-offs coordination with purchasing team and tracking tools to ensure product is delivered on schedule. Change Order pricing, including lump sum change orders and Field Work Order tracking and proposals. Assist engineering department on design/build projects. Attend project and field job site meetings as needed. Coordinate schedules with the field team and superintendent onsite. Coordinate schedules with vendors, manufacturers, and subcontractors. Interact with clients, interpreting their needs and requirements, and providing timely responses. Prioritize and perform multiple tasks in a dynamic environment with time-sensitive deadlines. Understand and follow operating procedures within company and jobsite guidelines. Represent the company in a safe and professional manner. Skills and Qualifications Minimum 2 years of experience in the electrical construction industry as a Field Engineer and/or Estimator High school diploma or GED required Degree in Construction management, engineering or related field preferred Experience with Accubid Trimble preferred Proficient with Microsoft Office, Adobe, and Bluebeam Ability to problem solve and drive positive resolutions Adept at organizing and documentation Strong research and analytical skills Knowledge of inventory and supply management preferred Working Conditions This position is based in our Santa Clara office and is not eligible for remote work. Work may be performed in an office or on active job sites, depending on role and project needs. Office work includes sitting, typing, and using a computer for extended periods. Field environments may involve walking, standing, bending, or lifting materials (up to 30 lbs). Noise levels range from quiet (office) to high (job sites). May require occasional travel to project locations or meetings. REG will provide reasonable accommodations as required by the ADA and applicable state law. Disclaimer The duties and responsibilities listed above are representative of the work typically performed in this role but are not intended to be a comprehensive list. Actual responsibilities may vary depending on department needs, project scope, or business requirements. Employees may be assigned additional tasks as needed to support company goals and operations.

Redwood Electric is looking for a highly motivated and proactive individual who will be responsible for supporting the Project Manager and Project Team in the day-to-day operations of construction projects. About us Redwood Electric Group is a large business providing electrical construction and design services. We operate throughout the Greater Bay Area with offices in Santa Clara, San Leandro, Vacaville, and Sacramento. At Redwood Electric Group, our philosophy is focused on the commitment to our customers. Their success is a direct reflection of our success. Our business continues to reflect strong growth through innovation and our team's commitment to exceed customer expectations. Responsibilities Duties will include but are not limited to material procurement and tracking, document management, estimating, and client relations. Workload may vary from several small-sized jobs to one large project. Support projects team with day-to-day operations of construction projects. Review project drawings and/or specifications for given projects. Establish and create submittals in conjunction with submittal logs. Assist with the production and/or processing of RFIs. Material procurement including quantity take-offs coordination with purchasing team and tracking tools to ensure product is delivered on schedule. Change Order pricing, including lump sum change orders and Field Work Order tracking and proposals. Assist engineering department on design/build projects. Attend project and field job site meetings as needed. Coordinate schedules with the field team and superintendent onsite. Coordinate schedules with vendors, manufacturers, and subcontractors. Interact with clients, interpreting their needs and requirements, and providing timely responses. Prioritize and perform multiple tasks in a dynamic environment with time-sensitive deadlines. Understand and follow operating procedures within company and jobsite guidelines. Represent the company in a safe and professional manner. Skills and Qualifications Minimum 2 years of experience in the electrical construction industry as a Field Engineer and/or Estimator High school diploma or GED required Degree in Construction management, engineering or related field preferred Experience with Accubid Trimble preferred Proficient with Microsoft Office, Adobe, and Bluebeam Ability to problem solve and drive positive resolutions Adept at organizing and documentation Strong research and analytical skills Knowledge of inventory and supply management preferred Working Conditions This position is based in our Reno office and is not eligible for remote work. Work may be performed in an office or on active job sites, depending on role and project needs. Office work includes sitting, typing, and using a computer for extended periods. Field environments may involve walking, standing, bending, or lifting materials (up to 30 lbs). Noise levels range from quiet (office) to high (job sites). May require occasional travel to project locations or meetings. REG will provide reasonable accommodations as required by the ADA and applicable state law. Disclaimer The duties and responsibilities listed above are representative of the work typically performed in this role but are not intended to be a comprehensive list. Actual responsibilities may vary depending on department needs, project scope, or business requirements. Employees may be assigned additional tasks as needed to support company goals and operations.

We are seeking an experienced and motivated Project Engineer to join our team. The successful candidate will be responsible for providing technical support and project coordination for construction projects. As a key member of our project management team, the Project Engineer will be responsible for ensuring that projects are completed on time, within budget, and to the highest level of quality. Responsibilities Provide technical support for construction projects, including reviewing plans and specifications, preparing construction schedules, and coordinating with subcontractors Assist with project management activities, including developing project budgets, managing project resources, and monitoring project progress Ensure that all projects comply with relevant laws, regulations, and safety standards Manage project change requests, ensuring that changes are properly evaluated and approved Communicate with clients, stakeholders, and project team members to ensure that all parties are informed of project progress and any issues that arise Participate in project meetings and coordinate with project team members to ensure that all work is completed on schedule Assist in the development and implementation of project plans and schedules, ensuring that all work is completed on schedule and within budget Identify and manage project risks, ensuring that risks are mitigated and/or avoided Other duties as assigned Qualifications Bachelor's degree in civil engineering, construction management, or a related field 1+ years of experience in construction project engineering or related field Strong analytical skills, with the ability to analyze project data and identify trends and opportunities for improvement Excellent communication skills, with the ability to communicate effectively with a variety of audiences Experience with government contracts and compliance is a plus

Kitchell is seeking an experienced and dedicated Project Engineer to join our Northern California region in Jamestown, CA and build a long-term career at one of the most innovative and growth-oriented building companies in the United States. Overview Assist with the execution of CM services over an Design Build Healthcare construction project. Duties and Responsibilities Provides project support with the construction documentation process which includes RFI's, Submittals, Change Orders, Schedules, and Warranties/Operations/Maintenance manuals. Participate in As-Built documentation processes while in construction and at Closeout. Assist with all DSA documentation during construction in preparation for Closeout/Certification. Assist with verbal and written communications to the District, Architects, and Contractors. Maintain project documents through completion and certification. Participate in coordination of project meetings and prepare and distribute meeting minutes. Assist with performing change order analysis. Assist with project Punchlist development, tracking, and resolution. Assist the Project Manager/Construction Manager with preparing project reports. Perform other duties as required to ensure project success. Experience and Education Bachelor's Degree in Engineering, Construction Management, or Architecture is preferred. 2 or more years of experience assisting Construction/Project Managers on construction project is preferred. Experience working on vertical building public sector projects such as commercial buildings, courthouses, K-12, Hospitals, Public Safety, Higher Education, Civic and Municipal. Knowledge and Skills Strong verbal, writing, and computer skills are required. Ability to perform construction quantity take-offs and assist with Change Order evaluations required. Strong understanding of the DSA approval and certification process is strongly preferred. Proficient user skills with the MS Suite of tools and Bluebeam are required. Working knowledge of standard industry tools such as P6 and Procore is strongly preferred. Knowledge of construction estimating, scheduling, general construction principles, techniques, and site safety is strongly preferred. License and Certifications Valid driver's license with an acceptable motor vehicle record, free from suspensions or restrictions, is required. Travel Requirements Position based in Sacramento region, with potential to work from headquarters and later transfer to the project site. Requires potential travel once a month up to 100 miles and availability to travel between projects and offices as needed and when required by the project. Work Environment While performing the duties of this job, the employee must regularly work in an office and or construction environment. Conditions regularly include exposure to outdoor elements, hot/cold temperatures, wet conditions, noise, atmospheric conditions, and cramped quarters. The noise level in the work environment is occasionally loud. Physical Requirements While performing the duties of this job, the employee must regularly sit, stand, walk, talk or hear and use hands to finger, feel and handle; frequently reach with hands and arms; occasionally climb or balance and stoop, kneel, crouch or crawl. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus. Must frequently lift and or move 10 pounds and occasionally lift and or move up to 50 pounds. ABOUT OUR COMPANY Founded in 1950, Kitchell began as a commercial contracting business and over the years developed new talents and enterprises, acquiring complementary businesses and expertise to remain competitive. Today, Kitchell Corporation serves as the holding entity for several companies that are integral to Kitchell's core business, as well as those that operate independently. We provide a wide range of services within the built environment, including general contracting, construction management, development, facilities management, engineering, architecture, and myriad other services. Our employees manage projects from our main offices located in Arizona, California, and Texas. We offer an entrepreneurial environment that fosters personal and professional growth through in-house education programs, formal and informal mentoring, and cross-training opportunities. At Kitchell, we prioritize internal growth and building careers from within. We consistently rank among the top places to work, thanks to our tenured staff and outstanding benefits that are designed to enrich our employees' physical, mental, emotional, and financial well-being. These benefits include company performance bonuses, discretionary stock options, incentive bonuses, health, and life insurance, health savings accounts (HSA) with wellness incentives, flexible spending accounts (FSA), 401(k) plans with a 4% company match, tuition reimbursement, weight loss programs, discounted auto insurance, identity theft protection, rewards programs, and much more. Kitchell is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, sex, national origin, protected veteran status, or disability status. The annual base salary range for this role is currently the following for the specific levels Project Engineer I $72,000 - $80,000 Yearly The Company's salary ranges are determined by role, level, location, and alignment with market data. Individual pay is determined through interviews and an assessment of various factors, including job-related skills, relevant education and experience, abilities of the applicant and equity with other team members. The annual base salary range listed here is subject to change at any time, in the Company's discretion, and does not alter in any way the at-will nature of the employment relationship.

ACME Constructors Inc. | St. Louis, MO Employment Type: Full-time, In-Office Why Join Our Team? We are a 100% employee-owned (ESOP) company, which means you can build wealth and benefit directly from our shared success. Our culture is built on a foundation of collaboration, accountability, and excellence. We also offer a comprehensive benefits package, including: Competitive Compensation: Starting at $70,000 annually, based on experience Annual performance-based bonus Weekly pay Comprehensive Benefits: 401K with a 4% employer match Medical, Dental, and Vision insurance Employer-paid Life, AD&D, Short-Term, and Long-Term Disability Voluntary Accident Insurance Employee Assistance Program Generous Paid Vacation & Holidays About ACME Constructors Since 1947, we have been a leader in industrial construction, serving Fortune 500 and privately held companies across diverse industries. Our success is built on a commitment to safety and superior project management. With over 700 projects annually and three Missouri locations, we are a team of customer-driven, positive, and hardworking individuals with an entrepreneurial spirit. Our employee-owned structure fosters a deep sense of community and collaboration. About the Role We are looking for a proactive Project Engineer to assist with the planning, coordination, and execution of construction projects. This is a vital, full-time, in-office role that requires working closely with Project Managers and field teams to ensure projects are completed on time, within budget, and to the highest standards of safety and quality. Responsibilities Assist with project planning and scheduling. Review project plans and specifications. Manage technical documentation (submittals, RFIs, change orders). Perform quality control inspections. Support the procurement of materials and equipment. Provide technical support to construction teams. Assist in managing project costs and budgets. Qualifications Experience: Minimum of 2 years of experience in construction engineering or project management is preferred. Knowledge of construction processes and project management practices. Skills: Excellent communication, organizational, and problem-solving skills. Ability to work effectively in a team environment. Detail-oriented and able to manage multiple tasks simultaneously. Technical: Proficiency with Procore, CMIC, Microsoft Project, Bluebeam and the Microsoft Office Suite (Excel, Word, PowerPoint). Education: Bachelor's degree in Civil Engineering, Construction Management, or a related field. Professional Engineering (PE) license or working toward certification is a plus. READY TO APPLY? To apply, take the next step and share your resume with us. All inquiries, resumes and referrals shared are held in strict confidence. For questions and more information, contact ****************************. ACME is an Equal Opportunity Employer. We welcome differences in form of gender, race, ethnicity, disability, geography, socioeconomic status, age, politics, religion, philosophy, sexual orientation, gender identity or expression and veteran status. All applicants who share this goal are encouraged to apply-we look forward to hearing from you!