Quality Assurance Inspector jobs at MasTec - 1089 jobs

About Alston Construction: Alston Construction Company is a nationwide general contractor, with more than 20 offices coast to coast. For over 35 years we have delivered on our promises to our employees, clients, and business partners. We offer extremely competitive salaries, a superb benefits package, and a great place to work! In addition to routinely receiving awards for our projects and safety performance, we have also received numerous "Best Places to Work" awards! We look for passionate construction professionals who share our core values, to include: commitment, integrity, teamwork, and respect. As our CEO, Paul Little, says "In order to be successful at Alston Construction, you must enjoy seeing success in others." If this sounds like you and what you're looking for, we'd love to hear from you! Our top tier benefits package includes medical, dental, vision, prescription safety glasses, short-term disability, long-term disability, life insurance/AD&D, HSA, health FSA, dependent daycare FSA, EAP, 401(k), Roth 401(k), After-Tax Roth In-Plan Conversion; paid vacation and sick time, paid holidays, tuition reimbursement, Tickets at Work, paid Identity Theft Protection (family coverage) and more! Job Title: QA/QC APM Job Summary: The QA/QC Assistant Project Manager supports the execution of quality assurance and quality control processes for complex, mission‐critical data center projects. This role partners with Project Management, Engineering, and Field Supervision teams to ensure construction activities meet contractual requirements, design intent, and stringent quality standards typical of high‐availability facilities. The QA/QC APM plays a key role in documentation, inspections, issue resolution, and turnover coordination to ensure systems are installed and delivered to operational readiness. Essential Duties and Responsibilities will include: Assist in developing and implementing project‐specific QA/QC plans aligned with mission‐critical requirements. Support enforcement of quality standards across all phases of construction, including structural, architectural, and MEP systems. Verify quality requirements are reflected in subcontractor scopes, work plans, and installation activities. Coordinate and participate in quality inspections, testing, and verification activities. Track, document, and manage non‐conforming work, deficiencies, and corrective actions through closure. Maintain organized QA/QC logs, inspection reports, and documentation using company systems. Support quality oversight of mechanical, electrical, plumbing, fire protection, and low‐voltage systems critical to data center operations. Assist with system verification, pre‐functional checklists, and readiness activities supporting commissioning. Collaborate with commissioning agents and project teams to support system turnover and operational testing. Support punch list development, closeout inspections, and resolution activities. Assist in the completion and review of O&M manuals, as‐built documentation, and quality records required for client turnover. Education, Experience, and Licensing/Certifications include: Bachelor's degree in Construction Management, Engineering, or related field preferred. 3-5 years of experience in construction quality, project engineering, assistant project management, or related roles. Experience on mission‐critical facilities or data center projects strongly preferred. Familiarity with MEP systems and their role in high‐availability environments preferred. Alston Construction is an Equal Opportunity Employer.

Non-Exempt National Pipe & Plastics, a CRH company, is one of North America's largest PVC pipe producers, serving the water and energy markets from two east coast locations in Endicott, NY, and Greensboro, NC. But we're more than just a manufacturer. Our long history of exceptional customer service and product quality enables us to be a trusted and strategic solutions partner to engineers, contractors, distributors, specifiers, and more. As part of the CRH Infrastructure Products business, we are leading the industry with innovative, sustainable solutions with a safety-first mindset. Job Summary National Pipe & Plastics, one of the largest PVC pipe producers in North America, is currently seeking a Yard Quality Inspector for the shipping and receiving area. There is a $1000 sign-on bonus for this position with the first $500 paid after the first 3 months of continuous employment and another $500 paid after 6 months of continuous employment. Job Responsibilities QA load checks for all loads Conduct visual inspections for legible print line, gasket defects, chamfer, bell, fading, and any other issues of pipe Confirm all products being shipped with PO is accurate Confirm correct product makes it on the truck Confirm packaging is correct safe and secure for each bundle Number of boards and banding Number of pieces per bundle Identify any physical damage to product from yard handling and report through the proper channels All other duties as assigned Job Requirements High School diploma or GED or equivalent Vocational Training/Certification, other related experience or combination thereof At least 1 year of related experience, preferred Ability to read and understand equipment manuals and directions Must communicate effectively both verbally and in writing with superiors, colleagues, and individuals inside and outside the company Computer literate experienced with Microsoft Office software Ability to work in the outdoor elements Ability to lift up to 40 lbs. Compensation The hourly pay rate is $19-23/hr. Bonus opportunity 401(k) plan / group retirement savings program Short-term and long-term disability benefits Life insurance Health, dental, and vision insurance Paid time off Paid holidays What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

What you'll do: Requires knowledge of industry specific codes and standards. CWI-Certification Strongly Preferred. The inspector will be required to interpret and evaluate inspection results for welding fit-up and filler metal placement with respect to applicable codes, standards, and specifications, be able to set up and calibrate all testing equipment Use visual inspection techniques (VT) as well as Ultrasonic testing (UT) and Magnetic Particle Testing (MT) to perform non-destructive tests to identify errors or defects in product. Oversee welder qualification tests and evaluate welder performance. Accurately complete and maintain all required records. Follow all safety rules and practices. Perform other duties as assigned. Overtime is expected and required to meet production goals.

Non-Exempt Oldcastle Infrastructure™, a CRH company, is the leading provider of utility infrastructure solutions for the water, energy, and communications markets throughout North America. We're more than just a manufacturer of precast concrete, polymer concrete, or plastic products. We're a trusted and strategic partner to engineers, contractors, distributors, specifiers, and more. With our network of more than 80 manufacturing facilities and more than 4,000 employees, we're leading the industry with innovation and a safety-first mindset. Job Summary The QC technician will observe fabrication of precast concrete structures and their reinforcing cages to ensure compliance with Oldcastle standards and conformity to production drawings. The QC technician will also perform daily testing of concrete in compliance with state regulations and Oldcastle quality standards. Job Responsibilities Perform daily testing of concrete specimens Perform daily pre and post pour inspections of products Maintain records of observations for every structure produced Report to production crew, engineer, and management team on process improvements, repetitive mistakes, and quality concerns Write a Corrective Action Report for each defective or damaged product Assisting the sales team to respond to any customer complaints about product quality Ensure correct implementation of our QC program in Kenosha Other responsibilities may be assigned on a temporary or permanent basis as needed Job Requirements Must have QC experience in related industry ACI / PCI Certification preferred, or required to pass ACI Concrete Field Testing within 3 months and maintain certification At least 3 years of concrete experience preferred Basic computer skills Ability to read/write simple instructions and communicate effectively with team members Ability to lift up to 40 lbs. periodically throughout the day This job involves a lot of walking in an industrial indoor and outdoor manufacturing environment What CRH Offers You Highly competitive base pay Comprehensive medical, dental and disability benefits programs Group retirement savings program Health and wellness programs An inclusive culture that values opportunity for growth, development, and internal promotion About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. If you're up for a rewarding challenge, we invite you to take the first step and apply today! Once you click apply now, you will be brought to our official employment application. Please complete your online profile and it will be sent to the hiring manager. Our system allows you to view and track your status 24 hours a day. Thank you for your interest! Oldcastle Infrastructure, a CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law.

We're looking for can-do people who don't stand on ceremony, who aren't thrown off by hard work, and who believe engineering is a team sport. If that's you, apply now for our Lead Inspector opportunity in either our Idaho Falls or Pocatello, Idaho office. This is an exciting opportunity for a motivated person ready to take the next step in their career and contribute to our growing operations. Job Summary: The Lead Inspector will spend part or all of most days in the field on a construction project. They act under the direction of the Engineer as the Engineer's representative at the project construction site, observing and documenting construction activities to verify the work is progressing in conformance with the plans, specifications, and contract documents. Responsibilities include: Inspect, observe, and document the work in progress by the contractor. Act as a liaison between the Engineer, Owner, and the Contractor to facilitate communication Prepare daily reports to document work progress, site conditions, and decisions made Participate in and prepare notes for project meetings Maintain records for use in preparing project documentation Review applications for payment with the Contractor and forward with recommendations to the Engineer Participate in Engineer's visits to the site to assess work progress Other duties as assigned Required Skills/Abilities: IQP certifications required Ability to read and understand construction drawings and specifications Ability to read and understand standard agency speciation's including the Idaho Transportation Departments standard specifications, the Idaho Standards for Public Works Construction (ISPWC) and the Ada County Highway District Supplement to the ISPWC. Experience with accurate record-keeping Familiarity with public works construction processes and documentation Capable of working outdoors in adverse weather conditions over rough terrain Good written and verbal communication skills Familiarity with AASHTOWare and ProjectWise a plus Education and Experience: Hold Western Alliance for Quality Transportation Construction certifications, or ability to obtain them as soon as the role begins. This qualification is waived if applicant holds a degree in civil engineering or construction management. Hold active Idaho Qualified Personnel testing qualifications for the Idaho Transportation Department, or ability to obtain as soon as role begins. High School diploma or GED with a minimum of 3 years of construction and field experience. Valid driver license with an acceptable driving record. Proficient with Microsoft Office and Bluebeam Proficient with photographic and written documentation Benefits: Paid employee health, dental, and vision insurance Partially paid health, dental, and vision insurance for dependents Remote-friendly options Short-term and long-term disability insurance Life insurance Employee assistance program (EAP) Flexible spending account (FSA) Health reimbursement arrangement (HRA) 401k match program and access to asset management services Year-end bonus Costco membership Paid time off (PTO) and PTO sell back program Parental leave Tuition Reimbursement Paid day of community service We are a mid-sized consulting firm providing water, wastewater, civil, transportation, and structural engineering services throughout the West including Oregon, Washington, Idaho, Nevada, and Utah. We provide client-focused solutions in surface water, water and wastewater engineering, as well as transportation planning, roadway, bridges and vertical structures, site civil design, construction management, electrical, controls, and surveying. Our clients include federal, state, and local agencies as well as small and medium sized cities. Our work is never boring and always influences the communities we serve. We take joy in everything we do - from work to play - our staff finds ways to be more human and balanced. Please review the Voluntary Self-Identification of Disability form found here to answer the questions provided at the bottom of the application process. Keller Associates, Inc. is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Job DescriptionSalary: Were looking for can-do people who dont stand on ceremony, who arent thrown off by hard work, and who believe engineering is a team sport. If thats you, apply now for our Lead Inspector opportunity in either our Idaho Falls or Pocatello, Idaho office. This is an exciting opportunity for a motivated person ready to take the next step in their career and contribute to our growing operations. Job Summary: The Lead Inspector will spend part or all of most days in the field on a construction project. They act under the direction of the Engineer as the Engineers representative at the project construction site, observing and documenting construction activities to verify the work is progressing in conformance with the plans, specifications, and contract documents. Responsibilities include: Inspect, observe, and document the work in progress by the contractor. Act as a liaison between the Engineer, Owner, and the Contractor to facilitate communication Prepare daily reports to document work progress, site conditions, and decisions made Participate in and prepare notes for project meetings Maintain records for use in preparing project documentation Review applications for payment with the Contractor and forward with recommendations to the Engineer Participate in Engineers visits to the site to assess work progress Other duties as assigned Required Skills/Abilities: IQP certifications required Ability to read and understand construction drawings and specifications Ability to read and understand standard agency speciation's including the Idaho Transportation Departments standard specifications, the Idaho Standards for Public Works Construction (ISPWC) and the Ada County Highway District Supplement to the ISPWC. Experience with accurate record-keeping Familiarity with public works construction processes and documentation Capable of working outdoors in adverse weather conditions over rough terrain Good written and verbal communication skills Familiarity with AASHTOWare and ProjectWise a plus Education and Experience: Hold Western Alliance for Quality Transportation Constructioncertifications, or ability to obtain them as soon as the role begins. This qualification is waived if applicant holds a degree in civil engineering or construction management. Hold active Idaho Qualified Personnel testing qualifications for the Idaho Transportation Department, or ability to obtain as soon as role begins. High School diploma or GED with a minimum of 3 years of construction and field experience. Valid driver license with an acceptable driving record. Proficient with Microsoft Office and Bluebeam Proficient with photographic and written documentation Benefits: Paid employee health, dental, and vision insurance Partially paid health, dental, and vision insurance for dependents Remote-friendly options Short-term and long-term disability insurance Life insurance Employee assistance program (EAP) Flexible spending account (FSA) Health reimbursement arrangement (HRA) 401k match program and access to asset management services Year-end bonus Costco membership Paid time off (PTO) and PTO sell back program Parental leave Tuition Reimbursement Paid day of community service We are a mid-sized consulting firm providing water, wastewater, civil, transportation, and structural engineering services throughout the West including Oregon, Washington, Idaho, Nevada, and Utah. We provide client-focused solutions in surface water, water and wastewater engineering, as well as transportation planning, roadway, bridges and vertical structures, site civil design, construction management, electrical, controls, and surveying. Our clients include federal, state, and local agencies as well as small and medium sized cities. Our work is never boring and always influences the communities we serve. We take joy in everything we do from work to play our staff finds ways to be more human and balanced. Please review the Voluntary Self-Identification of Disability form found hereto answer the questions provided at the bottom of the application process. Keller Associates, Inc. is an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status.

Since 1953, Red Valve has set the standard for solving the world's toughest flow control challenges through unmatched elastomer design and manufacturing experience. Red Valve is dedicated to exceeding customer expectations with proven, creative, high-value solutions. Red Valve has a passion for innovation and creativity, with a wealth of patents and best approaches developed for customers' needs. The people of Red Valve embrace this passion every day, providing reliable solutions to customers' most demanding challenges, wherever and whenever they are needed most. Our Core Values Driven to Win Right - Can Do! - High Power - Low Ego & Thrive Together Red Valve was acquired by DeZURIK on January 1, 2021. Our organization offers the following: * Sign On Bonus * Health and Wellness Incentives * Employee Engagement Activities A Red Valve Quality Inspector must be a highly motivated, creative, self-starter who will perform a variety of quality control tests/inspections on products, materials, components, and parts, at various stages of the production process to ensure compliance with quality and reliability standards. The ideal candidate will demonstrate the desire and ability to drive change, identify business needs, areas of improvement and objectives through research and data-backed decision making that will empower them to make recommendations on appropriate business initiatives. Based on the needs of the business, this is a rotational position throughout the facility, covering a variety of quality processes and/or initiatives. The rotational schedule will be determined by the Quality Manager as necessary. Essential Duties and Responsibilities include the following: Knowledge of and/or commitment to learn the following responsibilities: * Ensure quality of manufactured goods * Inspect finished goods * Examine materials from suppliers before sending them to production * Inspect components, subassemblies, and assemblies * Perform quick visual inspections * Perform complex tests using instruments and equipment * Test, measure, and analyze products * Take samples for testing * Ensure company is meeting the standard codes in the manufacturing process * Record pass/fail grade of products * Produce detailed reports * Comply with various ISO operating procedures, work instructions * Observe dials, gauges and indicators to make sure that a machine is working properly * Count numbers of products tested or inspected * Process associated documentation including process tags, rework tags and nonconforming material documents * RMA - issuing and processing * Responsible for final inspection and signoff, and will stamp "OK-Lead" Supervisory Responsibilities This position does not have any supervisory responsibilities. Education High school diploma or general education degree (GED); or a minimum of two years related manufacturing experience and/or training; or equivalent combination of education and experience with an emphasis in quality inspecting. Skills/Experience * 3+ years of quality or other related business experience * Bachelor's Degree in a technical discipline is preferred or equivalent field experience or training * Practical knowledge of Lean business practices * Excellent time management, communication, customer service, and interpersonal skills * Strong analytical skills * Ability to read, interpret and work from drawing, specifications and standards * Ability to inspect parts & components to tight tolerances and specifications * Required: Basic ability to add, subtract, multiply and divide in all units of measure * Required: Intermediate knowledge and skills in the use of standard mechanical and electrical instruments, gauges and test rigs * Required: Basic ability to work under direct supervision and to follow written instructions and techniques * Required: Basic ability to write simple correspondence * Required: Basic efficient time management * Required: Intermediate decision making * Required: Intermediate computer skills, including Microsoft office Travel No travel required Physical Demands To perform this job successfully, the physical demands listed are representative of those that must be met by an employee. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to sit, stand, walk, use hands to handle and feel, reach with hands and arms, talk and hear. The employee may occasionally be required to crouch. The employee may occasionally lift items as heavy as 50lbs. Specific vision abilities may include the employee's ability to see near and far distances. WORKING CONDITIONS Ability to work in normal manufacturing and varying climate control office environment. When working occasionally in some shop areas, personal protection equipment (PPE) will be recommended and/or required (safety shoes, safety glasses w/side shields, hearing protection, face shield, gloves, apron, and boots). Stress may result from workload and meeting schedules. Must have the ability to support extended business hours to meet customer business needs. The ability to multitask is essential job function for this role. * Shift schedule is (4) 10- hour days Monday - Thursday 6:00am - 4:30pm * Friday is reserved for overtime as necessary and may be required * Exposed to loud sounds and distracting noise level DISCLAIMER: The above information on this has been designed to indicate the general nature and level of work performed by the employee within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of any employee assigned to this job. Nothing in this job description restricts management's right to assign duties and responsibilities to this job at any time. QUALITY Quality encompasses all aspects of DeZURIK, Inc.'s business, and every employee shares the responsibility to prevent the occurrence of any nonconformity relating to product, process, and the quality system. All employees have an obligation to identify and record any such nonconformity, and, through designated channels, initiate and recommend solutions. BENEFITS DeZURIK offers a generous benefit package including medical, dental, vision, life insurance, disability, accident, critical illness, and 401(k). Health savings, flexible spending, and dependent care accounts are also available as part of the benefit package. Holiday pay, PTO, and volunteer time are available.

Build Your Legacy with Veritas Steel! We take great pride in the bridges we build, and in the people who build them (and maintain our equipment)! _______________________________________________________________________________________________________________________________________________________________________________ Openings in Eau Claire, WI on all shifts! **MUST HOLD A CURRENT CWI or ASNT VT Level II** **Relocation assistance may be provided** We offer a very competitive benefit package! We offer company-paid life and accidental death & dismemberment insurance and short-term disability insurance, employee-paid medical insurance, dental and vision care, long-term disability insurance, flexible spending account, a retirement plan, earned vacation time & 10 paid Holidays! We provide uniforms, annual boot allowance, and provide necessary Safety Personal Protective Equipment (PPE). Principle Duties & Responsibilities:Perform visual inspection of material as required. Perform layout checks as needed.Perform rotational capacity tests on bolts prior to use in shop.Work with outside inspectors to resolve quality issues on the floor. Monitor welder qualification tests.Monitor and record welding parameters to insure compliance to approved WPS.Be able to read and understand the Welding code and Specifications.Perform Dimensional checks on lay downs and shop assemblies. Use Total Station as needed.Develop improvements in the quality control process to facilitate flow of work through shop.Conduct audits of Quality Management SystemPerform in a manner that will assure quality work flowing through the shop.Work with welders and leadmen to maintain quality.Be available, by use of a radio, etc. to perform needed checks.Maintain a log of work done, and complete required reports.Interpret the Specifications and applicable Codes.Ability to be flexible to work either early or late within assigned shift as needed.Coordinate inspection of QC hold points between production and DOT Inspectors.Use and encourage safe working habits.Knowledge, Skills, & Abilities:Effectively communicate with the crews, supervisors, and Quality Manager the results of your work, evaluate problems, proposed acceptable corrections, solutions, and schedules.Ability to understand and interpret blueprints, use measurement tools and techniques to verify geometric tolerances of fabricated parts and assemblies. Strong attention to detail and ability to make informed decisions based on project codes and specifications Coordinate your work with shipping department to assure loads have been inspected and ready to ship.Work with supervisors to plan your work and time in each shop to facilitate the flow of quality work through the shop.General working knowledge of Total Station to assist crews as needed and finalize assemblies during off shifts as needed.Positive attitude to promote team morale and ability to coach employees for improved quality of workmanship Requirements:Certified Welding Inspector Certification or ASNT VT Level II Preferred Qualifications:ASNT MT Level IIASNT UT Level IINACE or SSPC BCI Level IFabrication Shop BackgroundSafety is our priority! We have a very extensive training program to ensure the safety of all of our employees. Veritas Steel is an equal opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. PIcf0fca8dc1ad-31181-39546728

Imagine your career taking you to the depths of innovation and the heights of impact. Our people enable continuous progress. Their commitment, collective expertise, and unique capabilities are the engine room behind SBM Offshore's True. Blue. Transition. - shaping the future of energy, and beyond. About Us: SBM Offshore is the world's deepwater ocean-infrastructure expert. Our work is already resulting in cleaner, more efficient energy production. True. Blue. Transition. is our promise to enable that into the future while at the same time using our expertise to support new and existing markets in the blue economy. It starts with Advancing our Core: continuing to advance the decarbonization of traditional energy production. While Pioneering More: helping to enable the energy transition and using our unique capabilities in ocean infrastructure to support more industries to grow sustainably. Sharing our experience for a better blue tomorrow. Purpose * As Lead Inspection Coordinator, you lead activities to ensure that all equipment, materials, and processes meet industry standards and regulatory requirements. This involves planning, coordinating, and overseeing inspection activities to ensure compliance and safety. Responsibilities * · Inspection Planning: You develop and lead the implementation of inspection plans and schedules based on project requirements and regulatory standards. * · Coordination: You manage the coordination with internal teams, third-party inspectors, and regulatory bodies to facilitate inspection activities. * · Documentation: You maintain and lead the maintenance of comprehensive records of inspection reports, certificates, and non-conformance reports. * · Compliance Monitoring: You ensure all inspections comply with industry standards, company policies, projects requirements and regulatory requirements. * · Issue Resolution: You lead the identification, documentation, and facilitation of the resolution of non-conformances or quality issues. * · Communication: You provide regular updates to the project management team, quality assurance teams, and other stakeholders on inspection status and findings. * · Vendor Liaison: You work with suppliers and contractors to ensure their inspection processes meet project standards. * · Training: You conduct training sessions to the inspection teams on inspection protocols and quality standards' project specifics. * · Mentoring: you mentor and monitor the inspection coordinators' team and support their activities as needed. Education * Bachelor's degree in engineering, quality management, or a related technical field, along with relevant certifications in inspection or quality assurance. Experience * · Proven track-record in leading inspection coordination activities in the oil and gas or similar industry. * · Strong knowledge of industry standards and regulatory requirements. * · Excellent organizational and time-management skills. * · Excellent communication and interpersonal abilities. * · Knowledge of inspection management software and Microsoft Office Suite. * · Attention to detail and problem-solving skills. * · Ability to work under pressure and meet tight deadlines. Functional Competencies Expediting Analytics and reporting Quality Control Plans Regulatory Management Inspection, testing, commissioning and monitoring SBM Product Knowledge Purchasing Tools and Processes Package Management Third parties relation management GENERAL INFORMATION SBM Offshore N.V. is a listed holding company that is headquartered in Amsterdam. It holds direct and indirect interests in other companies that collectively with SBM Offshore N.V. form the SBM Offshore Group ("the Company"). For further information, please visit our website at ******************** The companies in which SBM Offshore N.V., directly and indirectly, owns investments are separate entities. SBM Offshore is proud to be an Equal Employment Opportunity and Affirmative Action employer. SBM Offshore does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status, or any other basis covered by appropriate law. All employment is decided on the basis of qualifications, merit, and business need.

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities, and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America. Job Summary Position is responsible for ensuring the quality of fabricated steel by reviewing design documents, inspecting materials, overseeing production, and conducting final inspections. This role collaborates with the production team to ensure all fabricated steel meets design specifications and quality standards. This role requires someone who is detail-oriented with experience in structural fabrication and quality control. Key Responsibilities: 1. Communicates with various departments such as quality, shipping, and others regarding inspections results and recommends corrective procedures. 2. Conducts final inspections of fabricated equipment for quality and compliance. 3. Ensures correct coatings are applied to fabricated steel. 4. Inspects incoming materials for specification compliance. 5. Mechanical Inspection experience to include, experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication installation. 6. Must be able to use measuring tools such as micrometers, calipers, transits, etc., and be able to set up dial indications and laser alignment devices. 7. Must be able to work in elevated areas. 8. Must have ASNT SNT-TC-1a VT level 11, CWI, or CAWI certification. 9. Must have knowledge of AISC, AWS D1.1, AWS D1.3 and AWS D1.6 Codes. 10. Must have knowledge of ASME Sec. I, ASME Sec. VIII, ASME B31.1 and ASMR B31.3. 11. Must have knowledge of bolt-up inspection including bolt lot verifications following RCSC specifications. 12. Participates in activities to support the company's strategic planning efforts. 13. Participates in the preparation of Quality control lTP. 14. Performs and records all in-process inspections/testing related to maintaining product traceability and run documentation. 15. Performs inspections to ensure product meets specifications. 16. Piping/Vessel Inspection experience level must fall in pressure vessel and pipe fabrication inspection, including welding, supports, instrumentation, etc. (ON056) 17. Structural Inspection experience to include, experience level that must fall within the fabrication of structural steel. 18. Utilizes various measuring and quality control instruments to maintain consistent product performance. 19. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements: 1. 1+ years' experience in fabrication or manufacturing environment. 2. 1+ years' experience in quality control inspection discipline. 3. Ability to work effectively in a fast-paced, team-oriented environment. 4. Excellent attention to detail and ability to identify quality issues. 5. Experience with quality management tracking software. 6. Familiarity with industry standards and regulations in structural fabrication. 7. High School Diploma required. 8. Proficient use of all Microsoft Office Suite programs. 9. Strong communication and interpersonal skills. Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements: 1. May stoop, kneel, or bend, on an occasional basis 2. Must be able to comply with all safety standards and procedures 3. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 4. Will interact with people and technology frequently during a shift/workday 5. Will lift, push or pull objects up to 501bs on an occasional basis. 6. Will sit, stand or walk short distances for up to the entire duration of a shift/workday. 7. Will use telephone, computer system, email, and other electronic devices on a frequent basis to communicate with internal and external customers or vendors Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

Digital Building Components, as part of the DPR Families of Companies is looking for an experienced Quality Control Inspector. Quality Control Inspectors are expected to visually inspect all products going through the factory within their assigned areas. This position is expected to be carried out in a professional, courteous, and non-biased manner, with a “Team” approach. The Quality Control Inspector is also required to create, process, and “upload” documents into the company's database pertaining to all quality processes (which include hard copies if necessary, the use of computers, I pad's, etc. The Quality Control Inspector is expected to inspect product (including components and subcomponents) visually and with the use of aids, including gauges, tape measures, a variety of inspection tools, etc. and finalize/provide a pass/fail outcome on all work. Inspectors are not “production” personnel, and therefore have a separate reporting structure from production and shall not perform any production-related work. Duties and Responsibilities: Work with the quality manager to identify quality issues and help ensure the highest quality product Work professionally with area leads, production personnel, weld technicians (including robots), and “others” to report, address, and document quality issues and concerns. Document and track all quality inspections using electronic reporting app, paper documents, and any other DBC assigned method(s). Read and understand production details and spool sheets Help create and implement the proper quality check(s) utilizing tools Attend any training that aids in job functions (roles and responsibilities) Manage and maintain document creation, flow, distribution, and uploading (which may include digital and hard copies). Aid in training new and existing employees Meet quality inspection requirements to assist in production flow Document review, control and improvement Aid in designing efficient details and design improvements Create a positive, respectful, and productive team atmosphere Participate in leadership training and functions Maintain and provide a clean and organized work environment Dress appropriately for the work performed (and meeting all company safety requirements). Crosstrain and assist Quality Control Inspectors in various areas (including the Finish Shop). Actively promote a safe working environment (as applicable) throughout the entire factory Able to use and read measuring tape, micrometers, calipers, multimeter, and other measuring devices in the performance of their duties. Able to operate electronic devices such as iPhone, iPad, and capable to use Microsoft suite products such as Excel, Word, PowerPoint, Outlook programs, etc. Education and Experience: Strong attention to detail and the ability to read blueprints. 2 to 5 years' experience in QC/QA in a manufacturing or construction environment. Experience with Microsoft Office products to create reports and record data. Ability to work with and assist others to maximize system effectiveness and efficiency. Ability to build positive and effective relationships with co-workers. Effective written and verbal communication skills. Demonstrates a commitment to a safety- first environment. Ability to read various gauges accurately (i.e. tape measurer, calipers and indicators). Ability to work overtime to meet production schedules to include weekend as needed. Required knowledge on tile installation/process and its products since the role is conducting daily inspection of that process within production. Physical Requirements: This job involves: walking and/or standing for up to 10 hrs. per day, bending, climbing, lifting and stretching. It requires the use of hands and fingers to hold, grasp push and lift items. Lifting requirements up to 40 lbs. Dust, noise and heat are common working conditions. Occasional use of cleaning chemicals. DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

JobID: 8801 JobSchedule: Full time JobShift: Day : As a 100% employee-owned contractor, when you work at Sundt, you're not just hiring on at a company, you're joining a culture. Because everyone at Sundt is part owner, you'll join a team of people who are deeply invested in their work. From apprentices to managers, we're passionate about the details and deliberate in everything we do. At Sundt we focus on building long-term prosperity for our clients, communities and employee-owners. We offer competitive pay, industry-leading benefits including a 401k and employee stock ownership plan, incentive programs for craft and administrative employees as well as training that focuses on your personal and professional growth. We're driven by skill, grit and purpose. Join us as we strive to be the most skilled builder in America Job Summary Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. Equal Opportunity Employer Statement: Sundt is committed to the equal treatment of all employees, and/or applicants for employment, and prohibits discrimination based on race, religion, sex (including pregnancy), sexual orientation, gender identity, color, age, disability, national origin, covered veteran status, genetic information; or any other classification protected by applicable Federal, state, or local laws. Benefit list: Market Competitive Salary (paid weekly) Bonus Eligibility based on company, group, and individual performance Employee Stock Ownership Plan & 401K Industry Leading Health Coverage Starting Your First Day Flexible Time Off (FTO) Medical, Health Savings, and Wellness credits Flexible Spending Accounts Employee Assistance Program Workplace Wellness Programs Mental Health Program Life and Disability Insurance Employee-Owner Perks Educational Assistance Sundt Foundation - Charitable Employee-Owner's program #LI-KW1

JobID: 9175 JobSchedule: Full time JobShift: : Basic Job Functions. Position is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications. Structural Inspection: Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt up inspection including bolt lot verifications using Skidmore-Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification. Electrical and Instrumentation Inspection: Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards. Mechanical Inspection: Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices. Piping Inspection: Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. #LI-IF1

Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. #LI-KA1

JobID: 9382 JobSchedule: Full time JobShift: : Basic Job FunctionsPosition is required to assist in the inspection, acceptance, and/or rejection of work performed in a particular discipline in compliance with applicable codes and/or specifications as dictated by quality programs and/or contract documents and specifications.Structural Inspection:Experience level must fall within the erection of structural steel. Must be able to work in elevated areas. Must have knowledge of AISC, AWS D1.1, and AWS D1.6 Codes. Must have knowledge of bolt?up inspection including bolt lot verifications using Skidmore?Wilhelm. Additionally, must have knowledge of architectural, insulation and lagging, grout and concrete placement, Epoxy anchor installation inspection. Must have CWI (Certified Welding Inspector) certification.Electrical and Instrumentation Inspection:Experience must fall in the installation of electrical and instrumentation components, including interconnecting wiring, cables, and tubing. Must be knowledgeable of ICEA, IEEE, ISA, NEC, NEMA, NESC, and NFPA Codes and standards.Mechanical Inspection:Experience level must fall in the setting and alignment of static and rotating equipment, equipment skids, coolers, tanks, and interconnecting process piping fabrication and installation. Must be able to use measuring tools such as micrometers, calipers, transits, etc. and be able to set up dial indicators and laser alignment devices.Piping Inspection:Experience level must fall in pipe installation inspection, including welding, supports, instrumentation, etc. Must have CWI (Certified Welding Inspector) certification. Key Responsibilities 1. Assists material handling personnel with required material storage and PM requirements as needed. 2. Communicates with others regarding inspections results and recommends corrective procedures. 3. Participates in activities to support the company's strategic planning efforts. 4. Participates in the preparation of Quality control ITP. 5. Performs control measuring and tests equipment. 6. Verifies the installation of the systems, components and equipment in accordance with the assigned discipline. Minimum Job Requirements 1. 1+ year construction practices 2. 1+ year in quality control inspection discipline 3. HS Degree Required 4. Proficient use of all Microsoft Office Suite programs Note: Job Description is subject to change at any time and may include other duties as assigned. Physical Requirements 1. Ability to wear personal protective equipment is required (including but not limited to; steel toed shoes, gloves, safety glasses, hearing protection, hardhat, vest, etc.) 2. May reach above shoulder heights and below the waist on a frequent basis 3. May stoop, kneel, or bend, on an occasional basis 4. May use telephone, computer system, email, or other electronic devices on a limited basis to communicate with internal and external customers or vendors 5. Must be able to comply with all safety standards and procedures 6. Occasionally will climb stairs, ladders, etc. 7. Required to use hands to grasp, lift, handle, carry or feel objects on a frequent basis 8. Will interact with people frequently during a shift/work day 9. Will lift, push or pull objects on an occasional basis 10. Will sit, stand or walk short distances for up to the entire duration of a shift/work day. Safety Level Safety-Sensitive Note: Jobs with the Safety-Sensitive designation are those that include tasks or duties that the employer reasonably believes could affect the safety and health of the employee performing the task or others such as operating a vehicle, operating equipment, operating machinery or power tools, repairing/maintaining the operation of any vehicle/equipment, the handling/disposal/transport of hazardous materials, or the handling/treatment/disposal of potentially flammable/combustible materials. #LI-KA1