Quality technician jobs in Gulfport, MS

Calgon Carbon | A Kuraray Company is growing-and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Quality Supervisor Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) - Generous Company Match! Perks: Incentives/bonus plans, competitive pay, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hours of work: Full-time position with hours Monday-Friday 9:00-5:00 The Quality Supervisor is responsible for the overall direction, coordination and evaluation of all Quality staff at the Pearl River location. This position is responsible for the development and management of the Pearl River quality staff to prevent internal failures. The Quality Supervisor is critical to the development of initiatives to improve plant performance against established quality measures resulting in reduced customer complaints. This position works collaboratively with the EHS and plant management to ensure plant compliance with company and regulatory standards including compliance to all applicable certifications. The Quality Supervisor takes a mentor role for Quality personnel to develop high performance Quality teams. This position is the primary liaison regarding product quality with internal teams as well as customers and external regulatory agencies Duties and Responsibilities (not limited to) * Ensure compliance to all product certifications as well as legal and regulatory standards * Work collaboratively in cross-functional teams to quickly identify potential issues and impose immediate corrective and preventative actions * Act as the voice of the customer. Investigate customer needs and develop strategies to implement changes needed to improve customer satisfaction * Control all final product lot dispositions for the Pearl River facility * Provide recommendations for rework of non-conforming product while maintaining clear traceability through the process * Ensure product quality and sustainability of production processes * Plan and conduct audits to continuously monitor testing to ensure quality validity * Oversee the site Quality Management Systems for the Pearl River location * Continuously review procedures and documentation to ensure alignment with processes in the facilities as well as alignment with the standards * Perform and coordinate internal audits on a routine basis to continuously evaluate the health of the QMS * Continuously monitor metrics to maximize profitability of the organization * Formulate reports and documents to track progress * Oversee the Pearl River Quality laboratory staff in support of the Pearl River manufacturing facility * Perform and/or coordinate all hiring, training and staff evaluations * Act as a mentor for the Quality laboratory staff while focusing on a high level of performance within a Quality team environment * Regularly analyze quality data and develop strategies that focus on improvement and growth opportunities * Work collaboratively with plant management to design and implement improved process controls or product performance * Act as the technical lead for all quality aspects including root cause analysis, process controls and preventative/corrective actions utilizing the Six Sigma methodology * Coordinate a supplier quality standard for the Pearl River production facility for all raw materials used in the manufacturing processes and end-user material shipments Qualifications * A bachelor's degree (B.A. or B.S.), or equivalent from four-year college or university is required (Chemistry, Engineering, or equivalent technical field) * A master's degree is preferred * 3-5 years of quality control experience is required * Microsoft Office Suite experience is preferred * Experience with the following is preferred: * ICP Mass Spectroscopy * Gas Chromatography * Ion Chromatography * IC OES Spectrometer * Analytical Instrumentation Maintenance and Troubleshooting About Calgon Carbon At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we've been at the forefront of developing cutting-edge technologies and solutions to meet the world's evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Quality Technician Job Code: 29956 Job Location: Stennis Space Center, Mississippi Work Schedule: 1st Shift 4/10: Employees work 10 hours per day, 4 days a week (Mon - Thurs 6:30am - 5pm) Job Description: As a Quality Technician you will play a critical role in helping us shape the future of space exploration. As part of our dedicated quality team, you'll be at the forefront of ensuring the precision and safety of liquid rocket engine assembly and test, primarily supporting NASA's Artemis program working with industry experts. If you have a keen eye for detail and a passion for problem-solving, this is the perfect opportunity to join our team and grow your career in a company that is committed to operational excellence, everywhere, everyday! Essential Functions: + Read and interpret technical drawings, blueprints, and specifications to understand product requirements + Verify compliance to engineering drawings, specifications, work instructions, or other product definitions + Perform work to production planning (work instructions) and document all quality inspection results required by production planning + Conduct in-process inspections during assembly, pre-test, and post-test processes to identify defects or deviations + Monitor, inspect, and approve reworked products to ensure they meet original requirements + Conduct visual inspections on incoming and finished hardware to ensure the product meets required specifications and quality standards + Perform inspections utilizing precision measurement tools and equipment (such as micrometers, calipers, and gauges) to verify dimensions and tolerances + Detect and document non-conforming conditions for any departure from the requirements of the contract, engineering drawing, specification, or other product definitions via the MES + Collaborate closely with a team of engineers and technicians to resolve issues and support continuous improvement activities + Travel to Kennedy Space Center to support RS-25 engine integration activities (1-3 weeks per trip, up to 2-3 times per year) + Maintain a clean and organized work area using 5S+1 + Adhere to all safety requirements, processes, and procedures Qualifications: + Requires a High School Diploma or equivalent and a minimum of 8 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 4 years of prior related experience. + US Citizenship required Preferred Additional Skills: + ASQ Certified Quality Inspector (CQI) + NDT Liquid Penetrant Testing (PT) Level II Certification #LI-JC4 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English (******************************************************************************************** or Spanish (******************************************************************************************** . For information regarding your Right To Work, please click here for English (****************************************************************************************** or Spanish (******************************************************************************************** .

Responsibilities: - Responsible for the evaluation of donor suitability for automated pheresis procedures. Administration and supervision of approved immunizations other than red blood cell immunizations. Provides limited emergency medical care to donors and staff, including the administration of medication or treatments in accordance with licensure or certification. - Promotes positive customer relations with all donors. - Conducts confidential and effective interviews with donors to obtain necessary information regarding suitability to donate plasma. - In conjunction with the Center Medical Director and/or Center Physician responds to medically related questions from staff including donor suitability and provides information to staff on medically related issues. - Performs medical history reviews and health assessments on donors. Assesses results of donor screening and laboratory tests to determine initial and continuing donor suitability. - Notifies and counsels donors regarding reactive test results. Refers donors to community facilities for follow-up and counseling. - Explains informed consent to applicant donors. This includes explanation of procedures, hazards and potential adverse events; explanation of immunization schedules, dose and antibody response; providing clear opportunity for donor to refuse participation; obtaining signature and date certifying informed consent. - Handles medical emergencies at the Center by providing routine care as outlined in Standard Operating Procedures (SOPs); elevates situations to Center Physician or local medical service providers as required. Periodically checks emergency kits to assure supplies are present and in-date. - Reviews test results and determines continued donor suitability. Follows SOPs regarding acceptable ranges of four-month required test (PE/STS) reports. Maintains knowledge of and apply all rules regarding four-month approvals and grace periods. - Assess signs and symptoms a donor may exhibit that may result in the inability to continue donating. - Manages employee hepatitis B and influenza immunization program, including administration of immunizations. - Understands the policies and procedures associated with hyper immune programs at the center where applicable, and oversees donor immunization programs. Reviews antibody titer results as required. Maintains awareness of appropriate immunization schedule for each antigen. - Ensures the accurate recording of donor data in the electronic donor information management system as outlined in the SOPs. - Maintains clean efficient work environment, and ensures sufficient operating supplies and forms are available as needed. Follows all Health Safety & Environmental (HSE) and Occupational Safety and Health Administration (OSHA) policies and procedures. Promotes safety in all actions. May conduct routine audits of these internal procedures and documentation. - Maintains confidentiality of all personnel, donor and center information. - May be cross-trained in other areas to meet the needs of the business. - Bilingual skills may be required, at the discretion of the organization, to meet the needs of the business. - Perform other job-related duties as assigned. Qualifications: - Active state licensure from a paramedic, nursing, physician assistant, chiropractic, naturopathic training program or medical school required OR - Completion of a foreign allopathic or osteopathic medical school and only if also currently licensed as a physician or certified as an EMT in the state - Minimum of one (1) year experience in a health care environment or one year of clinical experience from a vocational or nursing institution - Experience in a plasma or whole blood collection center or other regulated environment preferred - Ability to make and analyze a physical assessment of heart, lung sounds, signs of drug use, etc. - Ability to instruct donors, staff and community regarding the benefit of plasma donation programs Different qualifications or responsibilities may apply based on local legal and/or educational requirements. Refer to local job documentation where applicable. **About CSL Plasma** CSL Plasma operates one of the world's largest and most sophisticated plasma collection networks, with over 350 plasma collection centers in the U.S., Europe and China. Headquartered in Boca Raton, Florida, CSL Plasma is a subsidiary of CSL Behring, a global biotherapeutics business and a member of CSL. Plasma collected at CSL Plasma facilities is used by CSL Behring for the sole purpose of manufacturing lifesaving plasma-derived therapies for people in more than 100 countries. The parent company, CSL, headquartered in Melbourne, Australia, employs 32,000 people. Learn more about CSL Plasma here ************************** and CSL, CSL Behring, CSL Seqirus and CSL Vifor here ******************** . Learn more about CSL, CSL Behring, CSL Seqirus and CSL Vifor here at ******************** and CSL Plasma at ************************** . **Our Benefits** For more information on CSL Plasma benefits visit **************************** . **You Belong at CSL** At CSL, Inclusion and Belonging is at the core of our mission and who we are. It fuels our innovation day in and day out. By celebrating our differences and creating a culture of curiosity and empathy, we are able to better understand and connect with our patients and donors, foster strong relationships with our stakeholders, and sustain a diverse workforce that will move our company and industry into the future. To learn more visit ********************careers/inclusion-and-belonging **Equal Opportunity Employer** CSL is an Equal Opportunity Employer. If you are an individual with a disability and need a reasonable accommodation for any part of the application process, please visit ********************accessibility-statement . R-266345 CSL makes all employment decisions without regard to race, color, religion, national origin, ancestry, age, sex, gender, pregnancy, disability, marital status, sexual orientation, gender identity, genetic information, military status, protected veteran status (specifically status as a disabled veteran, recently separated veteran, armed forces service medal veteran, or active duty wartime or campaign badge veteran) or other classification protected by applicable US federal, state or local law. CSL complies with all applicable employment laws, including but not limited to Title VII of the Civil Rights Act of 1964, the Americans with Disabilities Act, the Fair Labor Standards Act, and the Immigration Reform and Control Act. ************************************************

HERE WE GROW AGAIN!!!! Seemann Composites, LLC is an industry pioneer, founded on groundbreaking research and development in composite fabrication processes. Our innovation revolutionized the field with the invention of SCRIMP (Resin Infusion Molding Process), a patented technology that has set the standard for over 30 years. Today, SCRIMP remains the cornerstone of our advanced manufacturing approach, enabling us to produce a diverse range of high-performance products. Recognized globally as a leader in composite and polymer solutions, we combine decades of expertise with state-of-the-art equipment and cutting-edge facilities to deliver world-class results. Our climate-controlled, air-conditioned work environments ensure comfort year-round while fostering productivity and precision. We're more than just a workplace-we're a family-oriented company that values teamwork, respect, and the well-being of our employees. At Seemann Composites, LLC, you'll find a supportive environment where your contributions matter, and your personal and professional growth are encouraged. As a trusted, critical supplier to the U.S. Navy, we proudly support submarine fleet programs, including new construction and fleet maintenance, with specialized products that meet the most demanding standards. Here, you'll work alongside talented professionals, contribute to mission-critical projects, and be part of a company where innovation, quality, and people come first. At Seemann Composites, it's a passion and we take pride in our work. Essential Job Requirements: Must be 18 years of age. Must be able to read, write and follow instructions, as well as perform basic math. Must have the ability to pay close attention to detail along with patience to see a task to completion. Demonstrate the ability to work with measuring devices such as tape measures, speed squares, framing squares. Capable to learn how to use tools such as grinders, saws, routers, sanders. Must be willing to and capable of handling chemicals and solvents. Must be able work well with other team members. Time management and good communication skills are required. Ability to adapt to a fast pace environment. Must be safety conscience. Due to the nature of our work, US Citizenship or Permanent Resident Card (Green Card) is required. Desired / Preferred Job Requirements: Must have reliable transportation High school diploma or GED. Highly motivated with problem solving skills. Organizational skills with the ability to multitask. 3 years' experience preferably from manufacturing and construction environment. Preferred 2-3 years of trade skills field. (Carpenter, Painter, Mechanic, or Home Finisher). Knowledge in composite materials and processes such as carbon fiber, fiberglass, resin infusion, vacuum bagging, and mold making. Ability to operate a forklift. Desired hobby interests: Team sports, arts and crafts, mechanics, wood working, gardening, building model cars, planes, or ships, small engine repairs and playing instruments. Essential Physical Requirement: Ability to bend, stoop or climb as necessary to perform required inspections. Ability to ascend and descend vertical work ladders, stand and walk for 10+ hours, work at heights, work in hot or cold environments, work in confined spaces and lift loads of approximately 50 pounds; Be able to lift, push, pull, perform repetitive movements, or occasionally carry heavy objects. Stand; bend, kneel, walk, stoop, crouch, and sit. Use hands and finger, handle, or feel and reach with hands and arms. Repeat the same movements. Bend and twist body. Ability to wear all assigned personal protective equipment, including but not limited to safety glasses, full face respirator, gloves, protective clothing, etc. Vision abilities required are close vision, distance vision, color vision, peripheral vision, depth perception ability to adjust focus. Work Environment: The manufacturing and office work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Prior to employment, applicants will have to successfully complete a criminal background check and a pre-employment drug test. EEO/Disabled/Veterans To apply go to ************************* or call 228.###.####

Job Description Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Civil QA/QC Inspector to join our growing team. The Civil QA/QC Inspector will oversee the quality assurance and quality control aspects of civil construction work including earthworks, concrete, asphalt, utilities, drainage, and structural components. The ideal candidate will be responsible for ensuring that all construction activities comply with applicable codes, standards, project specifications, and quality plans. Essential Functions of the Position Conduct QA/QC inspections for all civil construction activities, including but not limited to earthwork, foundation, concrete placement, utilities, roadways, and structural components. Review and interpret project drawings, specifications, and quality requirements. Prepare and maintain daily inspection reports, test results, non-conformance reports (NCRs), and corrective action documentation. Monitor construction work to ensure compliance with approved inspection and test plans (ITPs). Coordinate with contractors, site engineers, consultants, and quality managers to address any quality-related issues. Verify materials and workmanship meet the project's approved submittals and standards. Attend quality and coordination meetings as needed. Ensure that all inspection and testing records are properly documented and archived. Support continuous improvement by identifying recurring quality issues and suggesting practical solutions. Minimum Requirements High School Diploma or GED required; Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field preferred. Minimum of [3-5] years of experience in civil construction QA/QC, preferably in infrastructure or large-scale projects. In-depth knowledge of industry standards and codes (ASTM, ACI, AASHTO, etc.). Experience reviewing and implementing Inspection and Test Plans (ITPs) and Quality Control Plans (QCPs). Familiarity with construction materials and laboratory/field testing procedures. Strong organizational and communication skills. Proficiency with Microsoft Office Suite and QA/QC reporting tools. Valid driver's license and the ability to travel to project sites. Willing to travel to support projects when needed Preferred Certifications (Not Required, but a Plus): ACI Concrete Field Testing Technician - Grade I NICET Certification in Civil/Construction Inspection OSHA 10 or 30 Certification ISO 9001 Quality Management Systems knowledge QMS/QA-related training or certifications Physical Requirements Must be willing to work flexible schedules and overtime as needed by the department needs. Ability to lift and carry a minimum of 40 lbs. Drive a company vehicle in a safe manner Walk, stoop, bend, and climb up and down stairs and ladders Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel. Work in high grounds and high open buildings Work outside for extended periods in the heat and cold Ability to wear appropriate PPE for hazardous materials Ability to read and write in English About Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Description Craft and Technical Solutions is an established Marine and Industrial Staffing Company with offices all over the country. We partner with businesses as well as jobseekers to place individuals into positions efficiently. We are currently in need of QA/QC Inspectors to join our team in Pascagoula, MS, Bremerton, WA and Chesapeake, VA. Pay Range: $24-36/hour Summary Knowledge of QA/QC functions Familiarity with inspection and test procedures Perform QA/QC functions to ensure compliance with industry standards and company requirements Conduct inspections and tests according to established procedures Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Requirements Minimum of 7 years of experience in manufacturing, shipyard, or quality (testing/inspecting) roles Proficiency in MS Office applications Ability to read and interpret codes, specifications, and advanced blueprints 3 years minimum NAVSEA support experience with submarine preservation NACE Inspector and/or SSPC NBPI required. Benefits CTS, LLC offers a comprehensive benefit package to eligible employees. Eligible employees may enroll in: Health Dental Vision Voluntary Life/Voluntary AD&D Short-Term Disability Long-Term Disability Hospital Indemnity Accident Critical Illness 401k Safety and responsible work practices are of paramount importance at CTS and are woven into the fabric of everything we do. We are committed to employee safety & development, the protection of the environment and the communities where we operate. We are ready to be a partner in your career success! Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Craft and Technical Solutions, LLC has a consistent policy that requires an online application to be completed before we can further consider you as an applicant for this position. CTS is an EOE AA M/F/Vet/Disability

Leidos is seeking a Quality Engineer to support the Maritime System Division (MSD) in Long Beach, MS, an ISO 9001 certified facility. MSD is aligned within the Leidos Defense Systems Sector under the Sea Systems business unit. The scope of the business activities at the facility includes development and deployment of advanced technology solutions that address existing and emerging maritime missions of national importance for a broad range of customers across the Department of Defense, Intelligence Community, other governmental agencies and commercial clients. Primary Responsibilities: Perform program quality planning Analyze program QA requirements, support the development of test procedures and inspection checklists Participate in design and program reviews to ensure quality attributes are incorporated into product designs and process plans. Review and approve new and revised drawings Review and approve new and revised process plans Perform quality inspections of components, subassemblies and completed assemblies Witness required testing per approved test procedures, document findings Document nonconforming materials and coordinate the material reviews and dispositions Support the collection of Quality Metrics Work with program teams and site leadership to proactively work corrective actions and opportunities for improvement, and ensure timely completion as required by Leidos policies Analyze non-conformance trends to evaluate the effectiveness of corrective and preventive actions. Support the conduct and documentation of internal quality audits for the site, report results & document findings Provide guidance and work with programs to establish root cause(s) and corrective actions for findings and requirement escapes Review and provide input to program plans and other program documents in support of document accuracy and on-time delivery Support proposal activities to ensure quality requirements and hours are documented and estimated properly for the scope of the work Coordinate RMA returns and initiate and track supplier corrective action activity Maintain approved supplier list and support supplier ratings Basic Qualifications: Bachelor's Degree and 4-8 years of prior relevant experience; or master's with 2-6 years of prior relevant experience Ability to manage many activities simultaneously Self-starter with attention to detail / observant Strong communication and analytical skills Able to interpret written specifications and drawings Experience in performance of quality audits, root cause analysis and test witnessing Continuous improvement experience in leading innovative changes Must be a US citizen Must be proficient in using Microsoft Office Products (Word, Excel, Visio, PowerPoint, & Project) Working knowledge of the ISO 9001:2015 standard Preferred Qualifications: Certified Lean Six-Sigma Green or Black Belt Formal auditor training Experience working in a hardware manufacturing environment Experience performing ISO 9001 or AS9100 Quality Audits Experience with Windchill PLM system Experience with ERP system Experience with Solumina MES We're not looking for perfectly polished resumes or perfect fits. We're looking for people who break limits, ask hard questions, and don't wait to be told what's next. At Leidos, we're not following the roadmap - we're redrawing it. Original Posting:November 7, 2025 For U.S. Positions: While subject to change based on business needs, Leidos reasonably anticipates that this job requisition will remain open for at least 3 days with an anticipated close date of no earlier than 3 days after the original posting date as listed above. Pay Range:Pay Range $72,150.00 - $130,425.00 The Leidos pay range for this job level is a general guideline only and not a guarantee of compensation or salary. Additional factors considered in extending an offer include (but are not limited to) responsibilities of the job, education, experience, knowledge, skills, and abilities, as well as internal equity, alignment with market data, applicable bargaining agreement (if any), or other law.

Job Title: Quality Control Technician A General Function: The Quality Control Technician A is responsible for performing in-process and final inspections to ensure compliance with drawings, specifications, and all applicable requirements. This role operates under the general supervision of a Quality Control Manager, Supervisor, or other designated manager. Typical Duties: The following statements describe the general nature and level of work performed and should not be considered an exhaustive list of responsibilities: * Inspect and/or test parts, assemblies, welds, and other manufactured products to ensure compliance with quality standards. * Document inspection results and test findings accurately. * Accept or reject materials and assemblies that do not conform to design specifications or approved deviations. * Inspect purchased parts and specialty items from suppliers, setting up disposition procedures for non-conforming materials. * Collaborate with engineering to explore alternative methods and consult with production supervision regarding product issues or faulty workmanship. * Maintain detailed records and files related to quality control inspections and product evaluations. Required Knowledge, Skills & Abilities: * Strong understanding of detail and assembly drawings used in manufacturing processes. * Knowledge of relevant codes, standards, and regulations applicable to the assigned manufacturing area. * Proficiency in using tools, gauges, measuring devices, and test equipment required for the inspection process. * Ability to maintain accurate inspection records and documentation. * Strong communication skills with the ability to interface effectively with plant supervisors, managers, and customer quality assurance personnel. Experience & Training: * High school diploma supplemented by coursework in drafting, applied mathematics, or industrial technology, with considerable to extensive experience in manufacturing processes. * Or, an equivalent combination of education and training that provides the required knowledge, skills, and abilities. * A minimum of 5 years "Shipbuilding" experience. Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity.

Job Title: Quality Control Technician A General Function: The Quality Control Technician A is responsible for performing in-process and final inspections to ensure compliance with drawings, specifications, and all applicable requirements. This role operates under the general supervision of a Quality Control Manager, Supervisor, or other designated manager. Typical Duties: The following statements describe the general nature and level of work performed and should not be considered an exhaustive list of responsibilities: • Inspect and/or test parts, assemblies, welds, and other manufactured products to ensure compliance with quality standards. • Document inspection results and test findings accurately. • Accept or reject materials and assemblies that do not conform to design specifications or approved deviations. • Inspect purchased parts and specialty items from suppliers, setting up disposition procedures for non-conforming materials. • Collaborate with engineering to explore alternative methods and consult with production supervision regarding product issues or faulty workmanship. • Maintain detailed records and files related to quality control inspections and product evaluations. Required Knowledge, Skills & Abilities: • Strong understanding of detail and assembly drawings used in manufacturing processes. • Knowledge of relevant codes, standards, and regulations applicable to the assigned manufacturing area. • Proficiency in using tools, gauges, measuring devices, and test equipment required for the inspection process. • Ability to maintain accurate inspection records and documentation. • Strong communication skills with the ability to interface effectively with plant supervisors, managers, and customer quality assurance personnel. Experience & Training: • High school diploma supplemented by coursework in drafting, applied mathematics, or industrial technology, with considerable to extensive experience in manufacturing processes. • Or, an equivalent combination of education and training that provides the required knowledge, skills, and abilities. • A minimum of 5 years “Shipbuilding” experience. Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity.

PRIMARY DUTIES & RESPONSIBILITIES: Inspect, reject, or accept product according to visual standard, dimensional, and other requirements. Validation/PV testing of product according to specification and other procedural requirements Documentation and recordkeeping Wear appropriate PPE. Comply with all NOV Company policies, guidelines, and procedures. Comply with all HSE policies, guidelines, and procedures. Comply with all Quality policies, guidelines, and procedures. Other duties as assigned EDUCATION & EXPERIENCE QUALIFICATIONS: High School diploma or equivalent A minimum of 3 years of quality control experience within a manufacturing environment is preferred. JOB REQUIREMENTS: Factory environment with large range in temperature changes Standing up to 12 hours daily Walking up to 12 hours daily Bending/Stooping up to 12 hours daily Repetitive movement (shoveling/sweeping/fastening) up to 12 hours daily. Lifting weights up to 50 lbs. Regularly Push/Pull up to 12 hours daily. Use of Forklifts Travel less than 10% BEHAVIORAL COMPETENCIES: Dependability/Attendance Detail oriented TECHNICAL COMPETENCIES: Basic math Ability to use computer for data entry and learn Microsoft Office suite. Ability to learn API Q1 and/or ISO 9001 principles. Ability to accurately use scales, calipers, ruler, depth gauge. Ability to adapt and be cross trained to learn all job duties as required. Ability to learn technical repair and guidelines and procedures across departments. Ability to work in a fast-paced environment. Ability to read drawings, instructions or repair and assembly operations COMPETITIVE BENEFITS: (visit usbenefits.nov.com for more information about our benefits offerings)

Requirements High School Diploma or GED required; Technical or vocational training in welding, fabrication, or quality control preferred. Minimum 2-3 years of QA/QC inspection experience in a shipyard, marine, or heavy industrial environment. Strong knowledge of structural fabrication, shipbuilding processes, and welding standards. Familiarity with applicable codes and standards (AWS D1.1, NAVSEA, ABS, etc.). Ability to read and interpret blueprints, welding symbols, and technical specifications. Proficient in Microsoft Office and documentation software. Strong attention to detail and ability to work independently.

Team: 77 Quality Entity: Ingalls Shipbuilding Yes Full-Time Shift: 1st Virtual/Telework Opportunity: No - Not eligible for telework Travel Requirement: No We're building tomorrow's fleet today With more than 11,000 employees, HII's Ingalls Shipbuilding division is the largest manufacturing employer in Mississippi and a major contributor to the economic growth of Alabama. For nearly 85 years, we've designed, built and maintained amphibious ships, destroyers, and cutters for the U.S. Navy and the U.S. Coast Guard. The largest supplier of U.S. Navy surface combatants, we're simultaneously building four classes of ships and have pioneered the development and production of technologically advanced, highly capable ships for the surface Navy fleet for decades. Think that's cool? Keep reading: The Role Uses predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, internal defects, and missing welds. Uses various measuring devices. Accepts, rejects, or reworks defective or malfunctioning units or systems. Works from blueprints, diagrams, dial indicators, preset micrometers, scales, fixtures, customer specifications, drawing or inspection instructions and checklists. May monitor and verify quality in accordance with statistical process or other control procedures. Performs line clearances after each lot to ensure all materials from the previous lot have been removed.Must Have High School diploma or equivalent and 2 years additional education and/or related experience; Apprentice graduate/ Associate's Degree in relevant discipline and 1 year of related experience. May require certification.Nice to Have Should have ability to inspect at great heights, inspect confined spaces, stooping, bending, crawling, and climbing when required. Demonstrated basic computer skills are required. Should be able to read a blueprint. Why HII We build the world's most powerful, survivable naval ships and defense technology solutions that safeguard our seas, sky, land, space and cyber. HII's diverse workforce includes skilled tradespeople; artificial intelligence, machine learning (AI/ML) experts; engineers; technologists; scientists; logistics experts; and business administration professionals. Recognized as one of America's top large company employers, we are a values and ethics driven organization that puts people's safety and well-being first. Regardless of your role or where you serve, at HII, you'll find a supportive and welcoming environment, competitive benefits, and valuable educational and training programs for continual career growth at every stage of your career. Working at HII is more than a job - it's an opportunity to build a future. We offer comprehensive benefits including: medical, prescription drug, dental and vision plan choices, on-site health centers, tele-medicine, wellness resources, employee assistance programs, savings plan options (401K), financial education and planning tools, life insurance, tuition reimbursement, employee discounts, early childhood and post-secondary education scholarships, and more. Some benefits may vary depending on your specific division or work location. Together we are working to ensure a future where everyone can be free and thrive. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, physical or mental disability, age, or veteran status or any other basis protected by federal, state, or local law. U.S. Citizenship may be required for certain positions. Do You Need Assistance? If you need a reasonable accommodation for any part of the employment process, please send an e-mail to ************************** and let us know the nature of your request and your contact information. Reasonable accommodations are considered on a case-by-case basis. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to from this e-mail address. Additionally, you may also call ************** for assistance. Press #1 for Ingalls Shipbuilding.

Job DescriptionDescription: Support Point Eight Power in being an integral part of our clients' value chain by bringing best in class thinking and service to the oil and gas, marine, and energy markets. The Process Control Department is responsible for the integrity of Point Eight Power operations by maintaining and establishing quality standards as governed by policies, procedures, and regulations.?The overall objective of this position is to ensure Point Eight Power's manufactured products meet or exceed Point Eight Powers' quality standards and practices. Schedule: Monday to Friday, 6:00 AM to 5:00 PM, with Saturday hours from 6:00 AM to 12:00 PM Responsibilities: Inspect, test, or measure materials, products, installations, or work for conformance to client specifications. Measure dimensions of products to verify conformance to specifications, using measuring instruments such as rulers, calipers, gauges, or micrometers. Read blueprints, data, manuals, or other materials to determine specifications, inspection and testing procedures, adjustment methods, certification processes, formulas, or measuring instruments required. Conduct As-Built Quality Reviews to ensure our products meet or exceed client expectations in terms of quality, uniformity, and reliability upon final inspection.??? Facilitate the timely and effective resolution of product quality issues by serving as a liaison between the Manufacturing Engineer, Manufacturing Managers and/or Shop Foreman. Ensure Point Eight Power's quality and reputation by coordinating the UL labeling of products and assisting during UL inspections and other third-party inspections.??? Uphold impeccable quality levels by working closely with the Manufacturing Engineer to continually develop an understanding of Point Eight Power Policies & Procedures and ISO 9001 standards. Engage in systematic listening and responsiveness with partners and key clients by assisting the Manufacturing Engineer in handling complaints in a timely and effective manner.?? Decrease operational costs and risks by actively assisting in the development and maintenance of policies that enhance process compliance and ensure product quality. Qualifications Education/Certifications High School Diploma or GED, Required. ASQ certification in lean manufacturing, six sigma, preferred ISO Internal Auditor Certifications, preferred Experience 3+ years of experience performing quality control of structural and electrical assemblies within an electrical- type equipment manufacturing environment, such as switchboard, motor control centers, controllers manufacturing, etc, Required. 1+ years of experience applying ISO 9001 Quality Management System requirements, preferred. Knowledge, Skills & Abilities Customer and Personal Service: Knowledge of principles and processes for providing customer and personal services. This includes customer needs assessment, meeting quality standards for services, and evaluation of customer satisfaction. Equipment Maintenance: Knowledge of Point Eight Power products and equipment. Use of tools such as wrench, screwdrivers, ratchets/sockets, tape measures, and torque wrenches. Technical Services: Extensive knowledge of processes related to our products. Safety Compliance: The ability to recognize unsafe work habits. Understanding of OSHA regulations. Verbal & Written Communication Skills: Intermediate skills required. Ability to read, analyze, and interpret general business periodicals, professional journals, technical procedures, or governmental regulations. Ability to write reports, business correspondence, and procedure manuals. Ability to effectively present information and respond to questions from groups of managers, clients, customers, and the public. Math Skills: Intermediate skills required, including ability to calculate figures/discounts, proportions, area, etc. Computers and Electronics: Knowledge of computer hardware and software, including applications and programming such as Microsoft Office Business Suite. Production and Processing: Knowledge of raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods. Quality Control Analysis: Conducting tests and inspections of products, services, or processes to evaluate quality or performance. ISO 9001 Quality Management System: knowledge of ISO 9001 Quality Management System Requirements. Work Environment and Physical Demands This is an FLSA Non-Exempt position and is eligible for overtime pay in accordance with federal and state labor laws. This position is classified as non-exempt based on job duties that do not meet the exemption criteria outlined by the FLSA. The standard workweek is Monday through Friday, 40 hours per week; overtime may be required, including evenings or weekends, based on production demands. Work is performed in a manufacturing plant environment with exposure to moving machinery, dust, and industrial noise Noise levels range from moderate to high; hearing protection may be required in designated areas May be exposed to varying temperatures depending on the season and production processes Personal Protective Equipment (PPE) is required, including safety glasses, steel-toed shoes, gloves, and hearing protection as applicable Must be able to stand and walk for extended periods (up to 8-10 hours per shift) Regularly required to lift and/or move materials up to 50 pounds; team lifts used for heavier loads Frequent bending, stooping, reaching, and twisting to handle materials or access equipment Repetitive hand, wrist, and arm motions may be required depending on the task Frequent use of material handling equipment such as carts, pallet jacks, and forklifts (if certified) Must have the visual acuity to inspect materials and read job orders, labels, and production instructions Requirements:

We are Engineered to Serve. Tindall Corporation is a leading Precast Concrete Manufacturer, with locations throughout the Southeastern U.S. Our mission is to support our customers, create remarkable structures, and deliver never-before-seen solutions every step of the way. Our employees enjoy benefits including: Low Cost Employee Health plan, Dental, Vision, STD/LTD, Fully-paid Basic Life, Voluntary Life, Whole Life, Accident, Hospitalization, Critical Illness, EAP and a 401k Plan with Company Match & Profit Sharing. Summary of Primary Functions: Conducts pre-pour and post-pour inspections to ensure that concrete members achieve tolerances as required by shop cards and PCI. Performs concrete testing, witnesses stressing, and establishes adequate curing controls. Essential Duties and Responsibilities: All employees are required to follow all Safety and Quality rules and processes to ensure a safe working environment, and the production of high-quality products. * Inspect bed set-up according to shop drawings for proper size and placement of all reinforcement, including strands, plate location, all structural connections. * Note any nonconforming items and notify proper personnel to bring product into conformance. * Perform concrete testing: slumps, unit weights, air content, release cylinders, 28 day cylinders. * Set-up steam clocks to insure proper curing temperature. * Monitor finishing procedures in finishing shed. * Inspect final products, note any nonconformance's and notify the Engineering Department for approval or repair work order. All conforming products receive a green tag, all nonconforming products requiring engineering approval receive a red tag. * Check red tagged members after they are repaired to insure that they conform to Engineering's requirements. * All non-conformances for engineering approval are to be drawn up and submitted in writing. Job Specifications or Qualifications: Education and/or Experience: High School Diploma or general education degree (GED) is required. * All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

BiOrigin Specialty Products - Wiggins Mill Job Description: SQF & Quality Control Engineer The SQF & Quality Control Engineer is responsible for overseeing the implementation, improvement, verification, and validation of the SQF program while maintaining the integrity of the quality system. This role establishes, implements, and directs quality control initiatives to ensure that all products meet customer, consumer, and regulatory expectations. The position also develops and upholds quality assurance standards, procedures, and controls. Additionally, the engineer collaborates closely with manufacturing teams to plan and manage inspection activities and ensure compliance with customer requirements, third-party audit organizations, and regulatory agencies. Food Safety / Quality Management System Responsibilities Review all QMS documents at a minimum annually and ensure they meet the intent of the SQF Code. Develop, implement, and maintain Policies and Procedures that align with SQF requirements to maintain SQF certification. These include GMP, Food Defense, HACCP, and Food Safety. Revise QMS documents as needed based on Internal Audit findings, changes to code, or feedback from Operations. Provide SQF/Food Safety updates to employees Review and file Monthly Area GMP/Product Safety Audits. Follow-up with Area Leaders on GMP / Physical Conditions Corrective Action list. Oversee Pest Control Program and review all pest reports / trends. Conduct all program audits and follow-up on corrective actions Facilitate annual testing requirements & training Responsible for reviewing all Contract Service Provider's specifications and assigning a Food Safety Risk level. Help ensure all routine Contract Service Providers are GMP trained. Facilitate Workmanship, GMP, Food Safety & Food Defense training for new hires. Plan administrator for the Food Defense Plan Promote Food Safety Culture and oversee program Quality Control Responsibilities Plan and conduct studies, trials, and research to determine the feasibility of opportunities for process and product development. Define associated costs/savings, process changes required and risk/benefits analysis. Conceive, develop, and implement improvement opportunities. Implement changes based on results of research, trials or studies. This requires crew training, procedures, and system upgrades. Seek feedback from operating crews to ensure that the planning, organization, implementation and control of process/product improvement stay on track. Ensure the desired results are enduring and communicate post-implementation audits. Fully document and communicate results, conclusions, and recommendations to the business in a timely manner. Proactively seek out opportunities from operators, customers, consumers, industry leaders, and maintenance personnel. Ensure operators and all those responsible for quality are properly informed and trained on procedures for testing the product. Work with operations on a daily basis to troubleshoot operational difficulties, which may produce off-spec product, and to reduce the variability of the product. Qualifications: Bachelor's degree in Chemical or Mechanical Engineering or related field preferred. Minimum 3-5 years quality related experience in tissue industry required. Intermediate knowledge of Microsoft Office including Excel and Word required. Advanced knowledge of JD Edwards and Quality Windows, ParcView or similar system(s), preferred. Working knowledge of quality testing meters and gauges required. Strong verbal and written communication skills required Technical problem-solving skills and ability to lead and execute major quality projects. Working Conditions Office setting with daily exposure to paper machine areas and shipping and warehousing areas. Potential hazards include exposure to production equipment, high noise areas and heat and humidity Essential Physical Functions Sitting for extended periods of time at desk or in meetings Occasionally standing for extended periods of time in facility Climbing stairs Ability to wear PPE

BiOrigin Specialty Products - Wiggins Mill Job Description: SQF & Quality Control Engineer The SQF & Quality Control Engineer is responsible for overseeing the implementation, improvement, verification, and validation of the SQF program while maintaining the integrity of the quality system. This role establishes, implements, and directs quality control initiatives to ensure that all products meet customer, consumer, and regulatory expectations. The position also develops and upholds quality assurance standards, procedures, and controls. Additionally, the engineer collaborates closely with manufacturing teams to plan and manage inspection activities and ensure compliance with customer requirements, third-party audit organizations, and regulatory agencies. Food Safety / Quality Management System Responsibilities Review all QMS documents at a minimum annually and ensure they meet the intent of the SQF Code. Develop, implement, and maintain Policies and Procedures that align with SQF requirements to maintain SQF certification. These include GMP, Food Defense, HACCP, and Food Safety. Revise QMS documents as needed based on Internal Audit findings, changes to code, or feedback from Operations. Provide SQF/Food Safety updates to employees Review and file Monthly Area GMP/Product Safety Audits. Follow-up with Area Leaders on GMP / Physical Conditions Corrective Action list. Oversee Pest Control Program and review all pest reports / trends. Conduct all program audits and follow-up on corrective actions Facilitate annual testing requirements & training Responsible for reviewing all Contract Service Provider's specifications and assigning a Food Safety Risk level. Help ensure all routine Contract Service Providers are GMP trained. Facilitate Workmanship, GMP, Food Safety & Food Defense training for new hires. Plan administrator for the Food Defense Plan Promote Food Safety Culture and oversee program Quality Control Responsibilities Plan and conduct studies, trials, and research to determine the feasibility of opportunities for process and product development. Define associated costs/savings, process changes required and risk/benefits analysis. Conceive, develop, and implement improvement opportunities. Implement changes based on results of research, trials or studies. This requires crew training, procedures, and system upgrades. Seek feedback from operating crews to ensure that the planning, organization, implementation and control of process/product improvement stay on track. Ensure the desired results are enduring and communicate post-implementation audits. Fully document and communicate results, conclusions, and recommendations to the business in a timely manner. Proactively seek out opportunities from operators, customers, consumers, industry leaders, and maintenance personnel. Ensure operators and all those responsible for quality are properly informed and trained on procedures for testing the product. Work with operations on a daily basis to troubleshoot operational difficulties, which may produce off-spec product, and to reduce the variability of the product. Qualifications: Bachelor's degree in Chemical or Mechanical Engineering or related field preferred. Minimum 3-5 years quality related experience in tissue industry required. Intermediate knowledge of Microsoft Office including Excel and Word required. Advanced knowledge of JD Edwards and Quality Windows, ParcView or similar system(s), preferred. Working knowledge of quality testing meters and gauges required. Strong verbal and written communication skills required Technical problem-solving skills and ability to lead and execute major quality projects. Working Conditions Office setting with daily exposure to paper machine areas and shipping and warehousing areas. Potential hazards include exposure to production equipment, high noise areas and heat and humidity Essential Physical Functions Sitting for extended periods of time at desk or in meetings Occasionally standing for extended periods of time in facility Climbing stairs Ability to wear PPE

Thompson Engineering is a leader in delivering high-quality infrastructure and construction projects across the South. With a strong commitment to safety, quality, and client satisfaction, we are currently seeking a dedicated and experienced Civil QA/QC Inspector to join our growing team. The Civil QA/QC Inspector will oversee the quality assurance and quality control aspects of civil construction work including earthworks, concrete, asphalt, utilities, drainage, and structural components. The ideal candidate will be responsible for ensuring that all construction activities comply with applicable codes, standards, project specifications, and quality plans. Essential Functions of the Position * Conduct QA/QC inspections for all civil construction activities, including but not limited to earthwork, foundation, concrete placement, utilities, roadways, and structural components. * Review and interpret project drawings, specifications, and quality requirements. * Prepare and maintain daily inspection reports, test results, non-conformance reports (NCRs), and corrective action documentation. * Monitor construction work to ensure compliance with approved inspection and test plans (ITPs). * Coordinate with contractors, site engineers, consultants, and quality managers to address any quality-related issues. * Verify materials and workmanship meet the project's approved submittals and standards. * Attend quality and coordination meetings as needed. * Ensure that all inspection and testing records are properly documented and archived. * Support continuous improvement by identifying recurring quality issues and suggesting practical solutions. Minimum Requirements * High School Diploma or GED required; Associate's or Bachelor's degree in Civil Engineering, Construction Management, or related field preferred. * Minimum of [3-5] years of experience in civil construction QA/QC, preferably in infrastructure or large-scale projects. * In-depth knowledge of industry standards and codes (ASTM, ACI, AASHTO, etc.). * Experience reviewing and implementing Inspection and Test Plans (ITPs) and Quality Control Plans (QCPs). * Familiarity with construction materials and laboratory/field testing procedures. * Strong organizational and communication skills. * Proficiency with Microsoft Office Suite and QA/QC reporting tools. * Valid driver's license and the ability to travel to project sites. * Willing to travel to support projects when needed Preferred Certifications (Not Required, but a Plus): * ACI Concrete Field Testing Technician - Grade I * NICET Certification in Civil/Construction Inspection * OSHA 10 or 30 Certification * ISO 9001 Quality Management Systems knowledge * QMS/QA-related training or certifications Physical Requirements * Must be willing to work flexible schedules and overtime as needed by the department needs. * Ability to lift and carry a minimum of 40 lbs. * Drive a company vehicle in a safe manner * Walk, stoop, bend, and climb up and down stairs and ladders * Stand, walk and balance in irregular and uneven terrain and pavements, concrete, grass, dirt and gravel. * Work in high grounds and high open buildings * Work outside for extended periods in the heat and cold * Ability to wear appropriate PPE for hazardous materials * Ability to read and write in English About Thompson Engineering Thompson Engineering was established in 1953 in Mobile, Alabama. Since then, the company has grown to include multiple offices in states throughout the Southeast. Thompson Engineering is a subsidiary of Thompson Holdings, Inc. Our sister companies are Watermark Design Group, an architectural and interior design firm, and Thompson Consulting Services, a disaster recovery consulting firm. As a group, the three firms provide a broad range of architectural and engineering services. Thompson is an employee-owned firm with more than 300 personnel in multiple disciplines. Our staff has a vested interest in providing safe, quality driven, successful projects that are completed on time and within budget. Our business relies heavily on our performance and the repeat satisfaction of our customers. Thompson Engineering and Watermark Design Group are equal opportunity employers. M/F/D/V. Pre-employment drug screen and motor vehicle record checks are required.

Job Title: Quality Control Technician A General Function: The Quality Control Technician A is responsible for performing in-process and final inspections to ensure compliance with drawings, specifications, and all applicable requirements. This role operates under the general supervision of a Quality Control Manager, Supervisor, or other designated manager. Typical Duties: The following statements describe the general nature and level of work performed and should not be considered an exhaustive list of responsibilities: • Inspect and/or test parts, assemblies, welds, and other manufactured products to ensure compliance with quality standards. • Document inspection results and test findings accurately. • Accept or reject materials and assemblies that do not conform to design specifications or approved deviations. • Inspect purchased parts and specialty items from suppliers, setting up disposition procedures for non-conforming materials. • Collaborate with engineering to explore alternative methods and consult with production supervision regarding product issues or faulty workmanship. • Maintain detailed records and files related to quality control inspections and product evaluations. Required Knowledge, Skills & Abilities: • Strong understanding of detail and assembly drawings used in manufacturing processes. • Knowledge of relevant codes, standards, and regulations applicable to the assigned manufacturing area. • Proficiency in using tools, gauges, measuring devices, and test equipment required for the inspection process. • Ability to maintain accurate inspection records and documentation. • Strong communication skills with the ability to interface effectively with plant supervisors, managers, and customer quality assurance personnel. Experience & Training: • High school diploma supplemented by coursework in drafting, applied mathematics, or industrial technology, with considerable to extensive experience in manufacturing processes. • Or, an equivalent combination of education and training that provides the required knowledge, skills, and abilities. • A minimum of 5 years "Shipbuilding" experience. Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity.

We are Engineered to Serve. Tindall Corporation is a leading Precast Concrete Manufacturer, with locations throughout the Southeastern U.S. Our mission is to support our customers, create remarkable structures, and deliver never-before-seen solutions every step of the way. Our employees enjoy benefits including: Low Cost Employee Health plan, Dental, Vision, STD/LTD, Fully-paid Basic Life, Voluntary Life, Whole Life, Accident, Hospitalization, Critical Illness, EAP and a 401k Plan with Company Match & Profit Sharing. Summary of Primary Functions: Conducts pre-pour and post-pour inspections to ensure that concrete members achieve tolerances as required by shop cards and PCI. Performs concrete testing, witnesses stressing, and establishes adequate curing controls. Essential Duties and Responsibilities: All employees are required to follow all Safety and Quality rules and processes to ensure a safe working environment, and the production of high-quality products. Inspect bed set-up according to shop drawings for proper size and placement of all reinforcement, including strands, plate location, all structural connections. Note any nonconforming items and notify proper personnel to bring product into conformance. Perform concrete testing: slumps, unit weights, air content, release cylinders, 28 day cylinders. Set-up steam clocks to insure proper curing temperature. Monitor finishing procedures in finishing shed. Inspect final products, note any nonconformance's and notify the Engineering Department for approval or repair work order. All conforming products receive a green tag, all nonconforming products requiring engineering approval receive a red tag. Check red tagged members after they are repaired to insure that they conform to Engineering's requirements. All non-conformances for engineering approval are to be drawn up and submitted in writing. Job Specifications or Qualifications: Education and/or Experience: High School Diploma or general education degree (GED) is required. - All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.