Senior engineer jobs in Apex, NC

Senior Validation Engineer / CQV Specialist Employment Type: Full-Time, On-Site Salary Range: $70,000-$120,000/year A leading pharmaceutical manufacturing organization is seeking a few Senior Validation Engineers / CQV Specialists to support commissioning, qualification, and validation activities for critical systems and processes. These roles ensure compliance with regulatory standards and drives continuous improvement in a GMP-regulated environment. Key Responsibilities Develop and execute validation documentation for equipment and processes Support sterility assurance and related validation activities Maintain project timelines and coordinate with cross-functional teams Review technical documents and provide compliance input Assist with troubleshooting and process improvements Ensure adherence to cGMP and regulatory requirements Qualifications Bachelor's degree in engineering, life sciences, or related field 5+ years of experience in pharmaceutical or biotech validation Hands-on experience with commissioning, qualification, and validation protocols Familiarity with GMP regulations and FDA compliance standards Strong technical writing and problem-solving skills Ability to work onsite in Greenville, NC or Holly Springs, NC Physical & Technical Requirements Ability to work in a sterile manufacturing environment Must pass required visual acuity and safety qualifications Proficiency in Microsoft Word and basic Excel

Immediate need for a talented Senior Principal Systems Engineer. This is a 12+months contract opportunity with long-term potential and is located in Raleigh, NC(Onsite). Please review the job description below and contact me ASAP if you are interested. Job ID:25-93806 Pay Range: $74 - $75/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Responsibilities: Drive the implementation of best practices in software systems development and product lifecycles in collaboration with development team Technical leader providing team members guidance and feedback on technical work. Develop technical solutions to complex software system problems and deliver high-quality solutions on tight schedules Lead cross-functional team members (e.g. Commercial and Clinical) to translate user needs into system requirements. Lead decomposition of system requirements into software subsystem requirements. Lead risk analysis activities for software from the capture of inherent hazards through mitigation implementation. Work with verification engineers to define test strategies for the development of verification and validation plans using requirement tracing methods. Participate in software design reviews for components or features. Agile planning/execution skills including estimating, scheduling, and completing committed schedules. Drive collaboration with internal and external stakeholders and enable the team on better processes, practices and technical mentorship. Transforming software requirements into software test architecture. Interface with manufacturing, service, and customer training staff through the design transfer process. Ensure compliance to the product development process and quality system. Key Requirements and Technology Experience: Key Skills; electro-mechanical , Regulated , Healthcare. Bachelor's degree in an engineering discipline with 10 + years of experience. Experience on electro-mechanical devices preferred. Experience with development in an agile environment with experience creating and maintaining product backlogs. Excellent oral and written communication skills. Experience in a regulated industry preferred. Excellent documentation skills. Our client is a leading Pharmaceutical Industry, and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, colour, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

DSJ Global is currently partnered with an award winning and fast-growing pharmaceutical manufacturing company who is looking to add a Principal Engineer to their team in Raleigh, NC. This position requires a highly skilled individual with extensive experience in process development, scale-up, and optimization of parenteral drug products. The ideal candidate will have strong leadership skills, technical expertise, and the ability to work cross-functionally to ensure the successful commercialization of complex drug products. Responsibilities: Driving end-to-end engineering projects from early-phase development through to commercialization, ensuring all deliverables meet company, regulatory, and customer requirements. Design, develop, and optimize manufacturing processes for parenteral drug products, focusing on efficiency, scalability, and compliance with regulatory standards (FDA, EMA, etc.). Provide in-depth technical expertise in the areas of drug product formulation, sterilization, filling, and packaging processes. Collaborate closely with R&D, Quality Assurance, Regulatory Affairs, and Manufacturing teams to ensure seamless project execution and troubleshooting of any issues. Ensure all engineering activities are performed in compliance with applicable regulatory requirements, industry standards, and quality systems. Identify and implement process improvements to enhance product quality, reduce production costs, and increase operational efficiency. Mentor and develop junior engineers, fostering a culture of continuous learning and professional development within the engineering team. Proactively identify potential risks in the manufacturing process and provide innovative solutions to mitigate them. Prepare and review technical documents, including specifications, reports, and process validation documents, to support regulatory filings and audits. Requirements: Bachelor's degree in Chemical Engineering, Biomedical Engineering, Mechanical Engineering, or a related field. Advanced degree (MS or PhD) in a relevant engineering or scientific discipline is preferred. At least 6 years of experience in the pharmaceutical industry, preferably sterile injectables Extensive knowledge of drug product development and manufacturing processes, including aseptic processing, filling, and packaging. Strong understanding of GMP (Good Manufacturing Practice), FDA regulations, and international guidelines. Expertise in process validation, process control systems, and equipment qualification. Six Sigma or Lean Manufacturing methodology knowledge. Certification is a plus.

MMR Consulting is an engineering and consulting firm specializing in the pharmaceutical and biotechnology industries. Its services include Engineering, Project Management, and Validation. MMR has offices in Canada, USA, and Australia. This is an outstanding opportunity to join our growing team, where the successful candidate will work with a group of engineers involved in the design, project management, commissioning and start-up of various electrical systems (low, medium and high voltage) from design through to procurement, construction, commissioning, and turnover. This role shall work full time on-site. RESPONSIBILITIES Work as part of our customer's in-house engineering team, as an electrical systems engineer to support our customer with reviewing document designs/submittals from A/E firms, vendor shop drawings/specs/submittals, construction submittals to ensure owner's requirements are met. Oversee electrical projects end to end (from start to completion; i.e. design, procurement, construction, commissioning/startup, documentation support/close-out). Provide technical guidance into the design, project management, commissioning and validation, and start-up of various electrical equipment and systems. Review technical data sheets and drawings for various equipment, instrumentation, and systems with a variety of voltages (Low Voltage, and Medium Voltage systems) Perform field job walks, to review the progress / correctness of field activities Participate in commissioning & startup of electrical systems. Provide technical engineering guidance to junior engineers. Coordination with other engineering disciplines and other cross-functional departments (automation engineering, facilities engineering, process engineering, validation, project management, operations, quality, safety). Coordinate meetings with cross-functional departments, to drive project progress, facilitate decisions, and provide updates. Engage other departments, as required, into design reviews and decisions. Prepare, review, execute commissioning protocols, and reports. Work may require occasional support over shutdowns or extended hours, specifically during installation and commissioning / validation phases. The work will require working out of clients' facilities. As this position requires working on client sites, you will need to comply with the client's safety rules. Visit construction and installation sites, wear necessary safety PPE. Supervise contractors during critical installations of process equipment and associated utilities. Other duties assigned by client, and/or MMR, based on workload and project requirements. QUALIFICATIONS 6-8+ years of experience in electrical engineering and electrical construction. Will consider candidates with more experience as well for a Senior/SME Role. Knowledge of Low, Medium and High Voltage systems required. Possess leadership skills, and able to take initiative to lead projects, involving multiple stakeholders, departments, and varying complexity. Professional Eng. certification in NC is an asset, but not required. Send your resume to: ****************************** Compensation: Salary starting from 110k/year + benefits, or higher depending upon individual's experience Equal Employment Opportunity and Reasonable Accommodations MMR Consulting is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Our hiring decisions are based on merit, qualifications, and business needs. We are committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please let us know the nature of your request.

Notes: Fully Onsite Open for candidates with experience with project engineering and coordination experience Top 3 Must Have Skill Sets: 1. Ability to work well under pressure 2. Facilities knowledge and experience 3. Great communication skills 4. Proactive 5. Willingness to learn new experiences Job Details: Position involves support of senior staff in the initiation, design, and delivery of projects, particularly for facilities related scope. Employ basic engineering skills and practices to gather user requirements and translate them into technical documentation for execution by third party firms. Assist with project definition by performing engineering studies and assessment for facilities system, perform quality and overall facilities walkdowns. Perform field evaluations of existing systems and provide engineering design recommendations. Skills: self-started, ability to communicate effectively, manage tasks to completion. Experience with facilities management and projects is a must. Basic Qualifications Master degree OR Bachelor degree and 2 years of experience OR Associate degree and 6 years of experience OR High school diploma / GED and 8 years of experience

We're looking for a Senior Mechanical Engineer Lead in Cary, NC. You'll be accountable for budget, schedule and technical quality of challenging engineering tasks, as you gain familiarity with the client's expectations, scope, budget and schedule. Your multi-discipline, highly interactive team will successfully deliver on the design, development, application, evaluation, recommendation, and specification of engineered systems and products for building HVAC, Utility, Plumbing, and Fire Protection systems and components. At times you'll have opportunities to provide on-site assistance during startup. You will coordinate work activities with other design and engineering professionals and project management. You'll also have the chance to utilize your technical expertise mentoring junior team members to help your team discover what drives them, nurturing their purpose and guiding them forward. Your role keeps our company connected and we'll support you with what you need to be successful. Here's what you'll need: Bachelor's degree in Mechanical Engineering 15+ years of practical application of mechanical engineering and design, including HVAC, Utilities, fire protection, plumbing, and related mechanical building systems Minimum 5 years Life Sciences consulting engineering experience Professional Engineer (PE) preferred Ability to lead a medium to large multinational team of designers and engineers Ability to collaborate and work effectively in a variety of teams, including multi-disciplinary teams, with client, and construction team Passion for buildings and construction Ideally, you'll also have: Proficient working knowledge of Revit or SmartPlant software Industrial design experience including pharmaceutical manufacturing, semiconductor facilities, or similar Client-facing skills Strong communication skills both verbal and written Strong analytical and problem-solving skills Forward thinking, eager to learn best practices, and contribute with innovative ideas Displayed ability to learn quickly and driven to broaden knowledge base Project management experience Location This role is staffed out of our Cary, NC office as a hybrid position with majority of time worked remote, and approximately 2 days per week in the office on average as needed for projects. NOTE This job is intended to be a Direct Hire role.

The Senior IT Engineer 1(OSS Platform) is responsible for operations and maintenance of the local Open Source technology stack to support manufacturing operations from an IT/OT perspective in a global organization. This position acts as a single point of contact and escalation for the locally used systems and ensures the most appropriate level of service is supplied to meet future business needs. This role will initially be part of the local IT project team responsible for implementing all infrastructure and applications necessary to bring FDB's new site in Holly Springs, NC, online. This role functions as a local extension of the Global IT team reporting into the Sr. Director - IT. This role ensures local implementation and 24/7 support in alignment with global support processes. Company Overview FUJIFILM Biotechnologies is building the future of bioproduction in Holly Springs, North Carolina. By end of 2025, we'll open North America's largest end-to-end CDMO biopharmaceutical manufacturing facility, offering drug substance production, fill-finish, and packaging under one roof. We're looking for passionate, mission-driven people to help us realize this exciting vision and deliver the next vaccine, cure, or therapy. We offer a dynamic work environment and we're proud to cultivate a culture that will fuel your purpose, energy, and drive-what we call Genki. Ready to shape the future of medicine? Let's transform healthcare together! Holly Springs, North Carolina, combines small-town warmth with proximity to Raleigh's thriving tech scene, making it the perfect blend of community and opportunity. Fujifilm is globally headquartered in Tokyo with over 70,000 employees across four key business segments of healthcare, electronics, business innovation, and imaging. We are guided and united by our Group Purpose of “giving our world more smiles.” Visit: *************************************************** Job Description What You'll Do Monitors, manages, and troubleshoots end user computing systems across FUJIFILM Biotechnologies Assists in the establishment and alignment of roadmaps across IT & OT Implements and supports tools and services bridging the gap between IT & OT. Builds a modern, flexible, and mature service delivery model. Champions new technologies, like open source and cloud native activities, and act as an Open Source evangelist Implements and supports a fit-for-purpose containerization platform. Participates in industry forums to stay-abreast of current trends and promote our way of working and accomplishments. Provides level 2 support, including resolving complex technical issues within the OSS area of operations. Provides critical technical expertise. Creates and deploys of application packages for use on end point devices Assists with other projects involving the infrastructure and application systems teams. Analyzes inquiries and participate in on-call rotation for critical incident management. Determines appropriate technical area or vendor to resolve problems. Participates in project execution and quality assurance as needed. Ensures and drives service delivery of the IT ServiceDesk Other duties, as assigned Knowledge and Skills Excellent troubleshooting skills to identify and correct problems Excellent oral and written communications skills and fluency in English Strong analytical mind, eye for detail, and problem solving skills Drive for automation and simplification of tasks and processes Collaborative attitude with the willingness to work with global peers and cross-functional teams toward company and project team goals High sense of responsibility and ownership. Self-driven, flexible, has a positive attitude. High service and quality mindset Basic Requirement Bachelor's degree in Computer Science, Computer Engineering, Business Administration or equivalent work experience with 5+ years of experience with open source technologies OR Master's degree in Computer Science, Computer Engineering, Business Administration with 3 years of experience Experience implementing Enterprise Linux/*NIX hosting capabilities Knowledge of OpenStack tools, such as Grafana, Prometheus, Nagios, Zabbix, or similar. Foundational understanding of security Open Source technologies Experience with manufacturing IT/OT Preferred Requirements Experience in Life Sciences or GMP manufacturing environment FDBN is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status, sexual orientation, gender identify or any other protected class. If an accommodation to the application process is needed, please email FDBN_**************** . To all agencies: Please, no phone calls or emails to any employee of FUJIFILM about this requisition. All resumes submitted by search firms/employment agencies to any employee at FUJIFILM via-email, the internet or in any form and/or method will be deemed the sole property of FUJIFILM, unless such search firms/employment agencies were engaged by FUJIFILM for this requisition and a vali agreement with FUJIFILM is in place. In the event a candidate who was submitted outside of the FUJIFILM agency engagement process is hired, no fee or payment of any kind will be paid.

Pay: $80,000.00 - $135,000.00 per year Note: This position requires employees to be on-site five days a week at either the Raleigh, NC or Charlotte, NC office. Note: The qualified candidate for this position must have at least 5 years of transportation hydraulic design experience, preferably with NCDOT projects. About Our Client Our client is a privately held, employee-owned, and woman-owned engineering firm with over three decades of success. Headquartered in Raleigh, NC, they are recognized among the top firms in the Southeast and are a certified DBE and HUB business. With offices in Raleigh and Charlotte, they provide engineering services in transportation, roadway design, hydraulics, and more, delivering innovative solutions with a hands-on approach. Job Description Lead and support hydrology and hydraulic analysis for roadway and transportation projects Design stormwater management systems, ponds, and conveyance systems Perform erosion control and outfall analysis to ensure compliance with environmental standards Contribute to all aspects of roadway drainage design including culverts, bridges, ditches, BMPs, and watershed studies Conduct site visits and fieldwork to confirm existing conditions Develop hydrologic and hydraulic improvements for roadway and drainage projects Collaborate with multidisciplinary teams, sub-consultants, and permitting agencies Extract and analyze data from MicroStation, GEOPAK Drainage, HEC-RAS, and related tools Provide technical guidance and mentorship to junior staff Manage project scopes, schedules, and budgets when assigned Qualifications Bachelors or Masters degree in Civil Engineering or related discipline Professional Engineer (PE) license preferred Minimum of 5 years of hydraulic design experience, ideally with NCDOT projects Proficiency with MicroStation, GEOPAK Drainage, and HEC-RAS Working knowledge of NCDOT Guidelines for Drainage Studies and Hydraulic Design and FHWA Hydraulic Design Manual Soil erosion and sediment control design experience Familiarity with OpenRoads Designer and SUDA is a plus Strong written and verbal communication skills with the ability to work collaboratively in a team environment Must be authorized to work in the U.S. (sponsorship not available) Why This Is a Great Opportunity Join a top-ranked engineering firm with over 30 years of growth and recognition Relocation assistance available for qualified candidates Opportunity to work on diverse transportation and drainage projects with state-wide impact Professional growth potential, including project management opportunities and leadership development Comprehensive benefits package including health, vision, dental, life insurance, PTO, retirement plan, and paid holidays. JPC-384 Job Type: Full-time Benefits: Dental insurance Health insurance Life insurance Paid time off Relocation assistance Retirement plan Vision insurance

We are seeking a motivated and detail-oriented Project Engineer to join our dynamic team. The ideal candidate will play a pivotal role in overseeing various construction projects from inception to completion, ensuring that all aspects are executed efficiently and effectively. This position requires strong project management skills, proficiency in construction management software, and a solid understanding of engineering principles. Your responsibilities in this role: Maintain contract documents, posting and distribution of addenda, field orders, RFI's and Requests for Proposal Control shop drawings and submittals to review for contract compliance and establish a routing process to ensure that all involved in the work are kept informed Lead the project QC including all deviation reports, pre-pour inspections, completion lists, testing reports, etc. and actively update the Project Manager and Superintendent Coordinate Requests for Information to and from architectural engineer, owner and other contractors and subcontractors Assist in assembling proposals and prepare owner change order requests Maintain “As-Built” drawings; prepare final close out sets Secure operations manuals guarantee and warranties; assist in project close-out What you need to qualify: 1-3 years of relative job experience in commercial construction highly preferred BS degree in Construction Management or Engineering Thorough understanding of industry practices and standards Strong foundation in database management (ex. Excel) and related industry software (ex. Bluebeam) Highly collaborative work style with excellent communication skills Join us as we build innovative solutions in the construction industry! LRT is proud to be an Equal Opportunity Employer and member of the Drug Free Safety Program.

About Analog Devices Analog Devices, Inc. (NASDAQ: ADI ) is a global semiconductor leader that bridges the physical and digital worlds to enable breakthroughs at the Intelligent Edge. ADI combines analog, digital, and software technologies into solutions that help drive advancements in digitized factories, mobility, and digital healthcare, combat climate change, and reliably connect humans and the world. With revenue of more than $9 billion in FY24 and approximately 24,000 people globally, ADI ensures today's innovators stay Ahead of What's Possible. Learn more at ************** and on LinkedIn and Twitter (X). Engineer - Test Engineering, Product Development About the Role As a Test Engineer in our Product Development team, you will be responsible for designing, developing, and implementing cost-effective methods for testing and troubleshooting systems and equipment throughout the product development and manufacturing phases. You will prepare test and diagnostic programs, design test fixtures and equipment, and complete specifications and procedures for new products. Working with moderate guidance, you will plan labor, schedules, and equipment requirements for testing and evaluating both standard and specialized devices, while continuously developing your technical expertise in test engineering. Key Responsibilities * Test Case Development: Design and implement comprehensive test cases and methodologies to ensure product reliability and quality across multiple projects. * Diagnostic Testing: Create and execute diagnostic testing programs that effectively identify performance issues throughout various product development phases. * Test Fixtures Design: Develop specialized test fixtures and equipment that accurately measure and validate product specifications under various conditions. * Procedure Development: Define and document test setups and procedures that ensure devices comply with industry and company standards. * Resource Planning: Plan and coordinate resources including labor, schedules, and equipment allocation to optimize testing activities and timelines. * Troubleshooting: Identify and resolve technical issues in systems and equipment throughout the development process, applying analytical problem-solving techniques. * Quality Assurance: Implement and maintain testing processes that adhere to established quality standards and requirements. * Qualification Testing: Lead qualification efforts for product lines to meet market standards and customer requirements. * PCB Design: Design and oversee the manufacture of PCBs for test setups and evaluation boards that enable effective product testing. Must Have Skills * Test Case Development: Ability to design structured test methodologies that thoroughly validate product functionality against specifications, with competence in applying standard test principles. * Diagnostic Testing: Proficiency in creating and executing diagnostic programs to effectively identify product defects and performance issues across development phases. * Test Fixtures Design: Experience designing and developing moderate-complexity test fixtures and equipment that accurately measure product parameters. * Procedure Development: Capability to define clear test setups and write detailed procedures that ensure consistent testing approaches and results. * Resource Planning: Skills in estimating and coordinating resource requirements for testing activities, including scheduling and equipment allocation. * Troubleshooting: Demonstrated analytical approach to identifying and resolving moderately complex technical problems in systems and equipment. * Quality Assurance: Working knowledge of quality standards and ability to implement appropriate testing processes to meet quality requirements. * Qualification Testing: Understanding of qualification testing methodologies and ability to lead qualification efforts for assigned product lines. * PCB Design: Technical knowledge of PCB design principles and ability to design boards for test setups and evaluation purposes. Preferred Education and Experience * Bachelor's or Master degree or equivalent in Electrical Engineering, Computer Engineering, or a related technical field. * 0-2 years of relevant experience in test engineering or a related discipline. Why You'll Love Working at ADI At Analog Devices, you'll be part of a collaborative and innovative team that's shaping the future of technology. We offer a supportive environment focused on professional growth, competitive compensation and benefits, work-life balance, and the opportunity to work on cutting-edge projects that make a real impact on the world. You'll have access to continuous learning opportunities and mentorship from industry experts. Join us and help create the technologies that bridge the physical and digital worlds, making a tangible difference in how people live, work, and connect. For positions requiring access to technical data, Analog Devices, Inc. may have to obtain export licensing approval from the U.S. Department of Commerce - Bureau of Industry and Security and/or the U.S. Department of State - Directorate of Defense Trade Controls. As such, applicants for this position - except US Citizens, US Permanent Residents, and protected individuals as defined by 8 U.S.C. 1324b(a)(3) - may have to go through an export licensing review process. Analog Devices is an equal opportunity employer. We foster a culture where everyone has an opportunity to succeed regardless of their race, color, religion, age, ancestry, national origin, social or ethnic origin, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, parental status, disability, medical condition, genetic information, military or veteran status, union membership, and political affiliation, or any other legally protected group. EEO is the Law: Notice of Applicant Rights Under the Law. Job Req Type: Experienced Required Travel: No Shift Type: 1st Shift/DaysSecurity Clearance required: No The expected wage range for a new hire into this position is $86,400 to $118,800. * Actual wage offered may vary depending on work location, experience, education, training, external market data, internal pay equity, or other bona fide factors. * This position qualifies for a discretionary performance-based bonus which is based on personal and company factors. * This position includes medical, vision and dental coverage, 401k, paid vacation, holidays, and sick time, and other benefits.

NVIDIA is looking for an engineer who wants the excitement of direct customer interaction, and the reward of contributing to software and products, to join our team of Solution Engineers supporting the NVIDIA's GPU accelerated platforms in AI Factories! You will be working directly with customers to get them solutions on the latest NVIDIA platforms including the GB200. We are looking for an experienced engineer to triage customers' hardware platform issues and AI/ML workloads in huge datacenters of rack-scale platforms, solve customer problems, and contribute to products and software tooling. You must have excellent problem-solving abilities, communication skills and be able to work on multiple projects and tasks. You must be technically strong in Linux, have solid programming skills, and experience with multi-GPU platforms. Expertise analyzing performance of distributed GPU-accelerated workloads is a plus. What you'll be doing: * Provide direct support to our NVIDIA Enterprise customers and work to answer questions, reproduce, resolve, or advance customer issues. * Work with engineering teams on customer issues, providing logs, reproduction information, and other triage information. * Create/update product and/or support tools. * Take ownership and drive customer issues from inception to resolution. * Document customer interactions and better enhance our knowledge base. * Develop features and tools as part of solution engineering efforts to support NVIDIA technologies * Occasional work on weekends and holidays to support customers What we need to see: * Minimum of a BS in Computer Engineering, Electrical Engineering, or equivalent experience. * At least 5+ years of engineering experience with multi-GPU platforms * Strong system software (firmware, BIOS, kernel, driver, operating system) expertise * Solid understanding of Linux and the ability to analyze, optimize, and customize Linux environments for AI/ML workloads. * Containerized solutions experience with Docker, Kubernetes, Slurm * Professional-level communication skills, including adjusting communication to the technical level of the audience, and staying calm and focused in negative situations. * Excellent follow-up and organizational skills, with a passion or love for solving problems. * Proficient in C/C++ programming of platform OS, firmware, BIOS, kernel, drivers * Proficient in Python programming with the ability to build custom tools Ways to stand out from the crowd: * Background with parallel programming or GPU acceleration (e.g., CUDA) * Experience developing in GPU accelerated / cloud / virtualized environments * Experience analyzing software performance of distributed workloads * Clustering or HPC data center technologies including Upper Layer Protocols (NCCL, MPI) Your base salary will be determined based on your location, experience, and the pay of employees in similar positions. The base salary range is 136,000 USD - 212,750 USD for Level 3, and 168,000 USD - 264,500 USD for Level 4. You will also be eligible for equity and benefits. Applications for this job will be accepted at least until September 19, 2025. NVIDIA is committed to fostering a diverse work environment and proud to be an equal opportunity employer. As we highly value diversity in our current and future employees, we do not discriminate (including in our hiring and promotion practices) on the basis of race, religion, color, national origin, gender, gender expression, sexual orientation, age, marital status, veteran status, disability status or any other characteristic protected by law.

At General Motors, we are building on our long-standing legacy of innovation and leadership in advanced driving technologies, exemplified by our industry-leading hands-off driving system, Super Cruise . Our Autonomous Vehicles (AV) program is driven by a bold ambition to deliver expanded product portfolios that push the boundaries of safe, reliable autonomous and assisted driving experiences. Central to this mission is our Architecture and System Design team, a critical hub that operates at the intersection of requirement definition, architecture and system design, integration, and validation across the AV organization. This team ensures a cohesive and robust system architecture that enables seamless integration of our AV technologies and delivers the high standards of safety and performance our customers expect. We are seeking an experienced **Staff Systems Engineer** to lead systems engineering efforts for our embedded AV/ADAS platform. You will be responsible for defining and managing system-level requirements and architectures, optimizing resource allocation across computational and networking subsystems, and working closely with software and hardware teams to ensure seamless integration of vehicle platform components. This role is highly collaborative, strategic, and technical, influencing platform roadmaps and long-term technical direction. Key Responsibilities + Lead the end-to-end systems engineering for embedded autonomous vehicle (AV) and advanced driver-assistance systems (ADAS) platforms. + Define, document, and manage system-level requirements, ensuring traceability and alignment with product and safety goals. + Develop and maintain system architecture, balancing trade-offs in compute resources (CPU, GPU, NPU), memory (RAM), and communication bandwidth (Ethernet). + Perform system resource allocation, profiling, and optimization to meet performance, power, latency, and reliability targets. + Collaborate cross-functionally with software architecture, firmware, hardware, validation, and vehicle integration teams to ensure cohesive system design and implementation. + Drive technical roadmap planning and contribute to strategic decisions on future platform capabilities and scalability. + Identify risks and develop mitigation strategies related to system integration and performance. + Mentor junior engineers and foster a culture of technical excellence and innovation within the team. Required Qualifications + Bachelor's degree in Electrical Engineering, Computer Engineering, Computer Science, Systems Engineering, or a related technical discipline. Master's or PhD preferred. + Minimum 8+ years of systems engineering experience, ideally within embedded systems, automotive, robotics, or related industries. + Proven track record of leading system architecture design and resource allocation for complex embedded platforms. + Deep understanding of AV/ADAS domain including embedded computing platforms, sensor integration, and real-time constraints. + Strong expertise in system performance analysis and optimization, including CPU/GPU/NPU architectures, memory hierarchies, and network bandwidth management. + Experience with platform systems engineering: device power management, I/O, internal & external communication + Experience with edge compute SoC and MCU architectures. + Hands-on experience with system modeling, simulation tools, and requirements management frameworks. + Experience working with Ethernet-based automotive networks (e.g., Automotive Ethernet, TSN). + Familiarity with safety standards and practices (ISO 26262, ASPICE) is a plus. + Excellent communication skills and demonstrated ability to work effectively in cross-disciplinary teams. + Proven ability to navigate and solve problems characterized by high ambiguity Preferred Qualifications + Advanced degree (MS or PhD) with a focus on embedded systems, systems engineering, or related fields. + Experience with embedded Linux or RTOS environments in automotive or robotics applications. + Knowledge of AV software stacks, middleware, and sensor data processing pipelines. + Familiarity with system-level debugging, profiling, and telemetry tools. + Prior experience at a leading AV company or tier 1 automotive supplier. + Strong leadership skills with experience mentoring engineers and leading technical projects. + Understanding of power management and thermal constraints in embedded platforms. + Experience contributing to strategic technical roadmaps and platform evolution. **Hybrid:** This role is categorized as hybrid. This means the successful candidate is expected to report to the Warren Technical Center in Warren, MI OR the Sunnyvale Technical Center in Sunnyvale, CA three times per week, at minimum. **Remote:** This role is based remotely but if you live within a 50-mile radius of [Atlanta, Austin, Detroit, Warren, Milford, Sunnyvale or Mountain View], you are expected to report to that location three times per week, at minimum. **Compensation** **:** The compensation information is a good faith estimate only. It is based on what a successful applicant might be paid in accordance with applicable state laws. The compensation may not be representative for positions located outside of New York, Colorado, California, or Washington. + The salary range for this role is $157,100 and $258,500. The actual base salary a successful candidate will be offered within this range will vary based on factors relevant to the position. + Bonus Potential: An incentivepayprogram offers payouts based on company performance, job level, and individual performance. **Benefits:** GM offers a variety of health and wellbeing benefit programs. Benefit options include medical, dental, vision, Health Savings Account, Flexible Spending Accounts, retirement savings plan, sickness and accident benefits, life insurance, paid vacation & holidays, tuition assistance programs, employee assistance program, GM vehicle discounts and more. **Company Vehicle:** Upon successful completion of a motor vehicle report review, you will be eligible to participate in a company vehicle evaluation program, through which you will be assigned a General Motors vehicle to drive and evaluate. Note: program participants are required to purchase/lease a qualifying GM vehicle every four years unless one of a limited number of exceptions applies." This role is based remotely, but if the selected candidate lives within a specific mile radius of a GM hub, they will be expected to report to the location three times a week {or other frequency dictated by your manager}. **About GM** Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. **Why Join Us** We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. **Benefits Overview** From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources (************************************************************* . **Non-Discrimination and Equal Employment Opportunities (U.S.)** General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire (********************************************* . **Accommodations** General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email (Careers.Accommodations@GM.com) us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. We are leading the change to make our world better, safer and more equitable for all through our actions and how we behave. Learn more about: **Our Company (************************************************** **Our Culture** **How we hire (************************************************ Our diverse team of employees bring their collective passion for engineering, technology and design to deliver on our vision of a world with Zero Crashes, Zero Emissions and Zero Congestion. We are looking for adventure-seekers and imaginative thought leaders to help us transform mobility. Explore our global locations (******************************************** We are determined to lead change for the world through technology, ingenuity and harnessing the creativity of our diverse team. Join us to help lead the change that will make our world better, safer and more equitable for all by becoming a member of GM's Talent Community (beamery.com) (*********************************************** . As a part of our Talent Community, you will receive updates about GM, open roles, career insights and more. Please note that filling out the form below will not add you to our Talent Community automatically; you will need to use the link above. If you are seeking to apply to a specific role, we encourage you to click "Apply Now" on the job posting of interest. The policy of General Motors is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, General Motors is committed to being an Equal Employment Opportunity Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at Careers.Accommodations@GM.com .In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.

Are you ready to lead with precision and tackle complex challenges? As an experienced Senior Roadway Field Engineer on our 540 project in Raleigh, you will be the technical expert guiding our projects to success, ensuring construction work complies with all engineering standards, codes and contract specifications. Bring your diverse ideas to build stronger, more resilient communities. Apply now and transform your career with us. What you will be doing Meets daily with project crews to review production schedule and confirm all materials, equipment and resources are readily available for production to continue on schedule and within budget. Collects, coordinates and analysis shop drawings, design specifications, material requirements and project data through the duration of the project to ensure quality and contract specification compliance. Provides technical input for project work plan and scheduling. Identifying risk elements of production, materials, equipment or process that could negatively impact the budget or schedule. Evaluates daily production, schedule and budget projections to accurately track project performance. Documents daily activities in Company approved methods and technologies. Remits accurate project quantity input and controls using assigned project cost coding to ensure project financials are accurately reported. Manages cost coding with Company finance and accounting teams regarding employee time, materials, equipment and subcontractor needs. Reviews and approves daily timecards for all Company construction crews. Works with Office Manager, payroll and job construction supervisors to resolve timecard inquiries, as needed. Reviews project specifications for quality assurance at the beginning of work, during the project work and after work completes. Initiates and manages appropriate certificates, inspections and other documentation regarding construction production on the project site. Works with construction crews and engineering leaders to plan field layout on the project site, ensuring appropriate utility and commercial lines are marked before production begins. Initiates and manages any permits needed before work can begin. Conducts required Job Hazard Analysis (JHAs) to ensure a safe and compliance work environment for all construction personnel. Attends weekly safety meetings with field team and project leadership; presents field analysis as needed. Coordinates subcontractor work methods, schedule and crews as needed. What we are looking for Bachelor's Degree in a related field required. 2+ years of construction engineering, scheduling or design experience required. Intermediate knowledge of cost coding, cost savings, budget and other project related financial implications required. Intermediate knowledge of scheduling processes and industry best practices. Intermediate interpersonal relationship skills, building new positive relationships towards a common goal. Knowledge of construction equipment & techniques, drawing & specifications, building materials and required standards applicable to the project. Ability to assume responsibility, interface and communicate effectively with others. Knowledge of construction scheduling and production time management preferred. Construction engineering experience or knowledge required. Why work for us Some of the benefits you may be eligible for as an employee are: Comprehensive compensation package and paid time off program Industry leading 401(k)/RRSP Medical/Extended Health Care, Dental, Vison and/or Provincial Medical Wellness benefits & Employee Assistance Program Tuition Reimbursement Program We are an EEO/ADA/Veterans employer. Salary Min USD $85,000.00/Yr. Salary Max USD $97,000.00/Yr.

MACOM designs and manufactures semiconductor products for Data Center, Telecommunication and Industrial and Defense applications. Headquartered in Lowell, Massachusetts, MACOM has design centers and sales offices throughout North America, Europe and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 75 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe, and Asia. Click here to view our facilities. In addition, MACOM offers foundry services that represent a key core competency within our business. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives and leading industry distributors. Our sales team is trained across all of our products to give our customers insights into our entire portfolio. Applications Design Engineer-Principal Job Description: * Provide technical support to key customers in base station/ broadcasting/ Microwave RF Power areas both OEM accounts and distribution channel. * Design and optimize high performance RF Power amplifier device/turnkey solution, help to debug and fine tuning customers' design inside lab to meet customer expectation. * Design and optimize high performance RF Power amplifier demo board/turnkey solution, help to debug and fine tuning customers' design inside lab to meet customer expectation. * Work with device design team to design or optimize evaluation circuit to initiate meaningful design-in opportunity in key customers or verify the feasibility on innovation concept. * Manage the account on technical interface. Build and maintain relationships with development crews at customer sites. * Help on product quality complaint description and quality report explanation from tech. point of view. * Technically drive marketing activities, including seminar/exhibition/conference, collect market feedback and give suggestions to Product Line on NPD. * Manage lab facilities like DPD system/Loadpull system etc. Qualifications: * Bachelor/master's degree in electronic engineering with the focus on RF. * 5+ years experiences in RF design or applications, experience in high power amplifier is preferred. * Expert in RF laboratory equipment and measurement techniques. * Expert on the design of high-power RF circuits for Power Amplifier applications. * Highly knowledgeable on modelling techniques for non-linear systems, familiar with simulation tool like ADS/Microwave office/Momentum. * Highly knowledgeable on the physics of device operation. * Good understanding of RF circuit techniques for performance enhancements such as digital pre-distortion and Doherty. * Excellent problem-solving skills. * Have a proactive, implementation-focused approach. * Excellent verbal, written and presentation skills. Due to ITAR regulations, only candidates who are U.S. Persons (U.S. citizens, U.S. nationals, lawful permanent residents, or individuals granted asylum or refugee status) will be considered for this position. This position is eligible to receive restricted stock unit (RSU) awards and cash bonuses, solely at MACOM's discretion, subject to individual and company performance. EEO: MACOM is an Equal Opportunity Employer committed to a diverse workforce. MACOM will not discriminate against any worker or job applicant on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, genetic information, veteran status, military service, marital status, or any other category protected under applicable law. Reasonable Accommodation: MACOM is committed to working with and providing reasonable accommodations to qualified individuals with physical and mental disabilities. If you have a disability and are in need of a reasonable accommodation with respect to any part of the application process please call *************** or email HR_*************. Provide your name, phone number and the position title and location in which you are interested, and nature of accommodation needed, and we will get back to you. We also work with current employees who request or need reasonable accommodation in order to perform the essential functions of their jobs. Benefits: This position offers a comprehensive benefits package including but not limited to: * Health, dental, and vision insurance. * Employer-sponsored 401(k) plan. * Paid time off. * Professional development opportunities.

We are **the makers of possible** BD is one of the largest global medical technology companies in the world. Advancing the world of health is our Purpose, and it's no small feat. It takes the imagination and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of MedTech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities. We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a **maker of possible** with us. BD is searching for a Staff Systems Engineer to join our rapidly expanding Pharmacy Automation Systems Engineering team. System Engineers are characterized by their disciplined, quantitative approach to system and technology integration as well as diverse cross-functional backgrounds and general knowledge of related disciplines. These individuals deploy tools and processes such as Design for Six Sigma and product development processes (waterfall, Agile) within a quality management system to enable more predictable product development and high quality products. System Engineers are responsible for technology integration in systems that have both enterprise software and electromechanical (hardware / embedded software) components. The Systems Engineer is a key member of the team and will contribute to system-level definition, design, and testing for robotic systems through close collaboration with hardware design, software, and other functional groups. **Main responsibilities will include:** + Ownership of Systems Engineering inputs and outputs for teams supporting innovation, new product development, or product lifecycle management. + Responsibility for development and maintenance of system/product design architecture and system/product requirements. + Document system/product-level requirements and manage changes via team review, approval, and release processes. + Lead the definition and documentation of system interfaces and interface requirements. + Ensure design traceability from user needs through requirements to test evidence and support the use of appropriate software tools for the creation and maintenance of the trace matrices. + Lead system/product-level integration, bug/defect tracking and configuration management. + Lead the system evaluation process through development and execution of system level test plans and protocols including data analysis, interpretation and communication of results and their impact through written reports, design reviews, and interactive discussions. + Lead system verification and validation activities for a multi-functional project team including protocol writing, execution and reporting. + Contribute to the transition from R&D to manufacturing/service and support resolving system issues for products in the field. + Liaise between R&D and other functions to inform/support teams based on quality procedures including risk analysis and verification/validation for specific subsystems. **Education and Experience** + Must have a bachelor's degree in science or engineering (5+ years of experience in technical area). A postgraduate degree is preferred. + Background in electro/mechanical devices and/or automation + A strong technical background and experience within Systems Engineering - Requirements Management, Hazards Analysis, System Architectural Development, Functional Modeling, Systems Integration, Statistical Test Design, Verification and Validation, Reliability Engineering, and Failure Modes Effects Analysis. + Proven track record developing complex experiments independently, performing statistical analysis, interpreting experimental results, and making informed recommendations. + Apply creative problem-solving skills to novel or complex applications. + Ability to self-direct and manage own work + Ability to collaborate in multi-disciplinary team settings, influence decision making, and build group consensus. + Strong problem-solving and debugging skills and an interest in learning new technologies. + Excellent written and oral communication skills + Experience implementing and educating others in Design for Six Sigma (DFSS) methodologies is a bonus. At BD, we prioritize on-site collaboration because we believe it fosters creativity, innovation, and effective problem-solving, which are essential in the fast-paced healthcare industry. For most roles, we require a minimum of 4 days of in-office presence per week to maintain our culture of excellence and ensure smooth operations, while also recognizing the importance of flexibility and work-life balance. Remote or field-based positions will have different workplace arrangements which will be indicated in the job posting. For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law. **Why Join Us?** A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you'll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place. To learn more about BD visit ********************** Becton, Dickinson, and Company is an Equal Opportunity Employer. We evaluate applicants without regard to race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, and other legally-protected characteristics. Required Skills Optional Skills . **Primary Work Location** USA NC - Durham - Roche Drive **Additional Locations** **Work Shift** Becton, Dickinson and Company is an Equal Opportunity/Affirmative Action Employer. We do not unlawfully discriminate on the basis of race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, or any other protected status.

SummaryJob Description We are the makers of possible BD is one of the largest global medical technology companies in the world. Advancing the world of health™ is our Purpose, and it's no small feat. It takes the imagination and passion of all of us-from design and engineering to the manufacturing and marketing of our billions of MedTech products per year-to look at the impossible and find transformative solutions that turn dreams into possibilities. We believe that the human element, across our global teams, is what allows us to continually evolve. Join us and discover an environment in which you'll be supported to learn, grow and become your best self. Become a maker of possible with us. BD is searching for a Staff Systems Engineer to join our rapidly expanding Pharmacy Automation Systems Engineering team. System Engineers are characterized by their disciplined, quantitative approach to system and technology integration as well as diverse cross-functional backgrounds and general knowledge of related disciplines. These individuals deploy tools and processes such as Design for Six Sigma and product development processes (waterfall, Agile) within a quality management system to enable more predictable product development and high quality products. System Engineers are responsible for technology integration in systems that have both enterprise software and electromechanical (hardware / embedded software) components. The Systems Engineer is a key member of the team and will contribute to system-level definition, design, and testing for robotic systems through close collaboration with hardware design, software, and other functional groups. Main responsibilities will include: Ownership of Systems Engineering inputs and outputs for teams supporting innovation, new product development, or product lifecycle management. Responsibility for development and maintenance of system/product design architecture and system/product requirements. Document system/product-level requirements and manage changes via team review, approval, and release processes. Lead the definition and documentation of system interfaces and interface requirements. Ensure design traceability from user needs through requirements to test evidence and support the use of appropriate software tools for the creation and maintenance of the trace matrices. Lead system/product-level integration, bug/defect tracking and configuration management. Lead the system evaluation process through development and execution of system level test plans and protocols including data analysis, interpretation and communication of results and their impact through written reports, design reviews, and interactive discussions. Lead system verification and validation activities for a multi-functional project team including protocol writing, execution and reporting. Contribute to the transition from R&D to manufacturing/service and support resolving system issues for products in the field. Liaise between R&D and other functions to inform/support teams based on quality procedures including risk analysis and verification/validation for specific subsystems. Education and Experience Must have a bachelor's degree in science or engineering (5+ years of experience in technical area). A postgraduate degree is preferred. Background in electro/mechanical devices and/or automation A strong technical background and experience within Systems Engineering - Requirements Management, Hazards Analysis, System Architectural Development, Functional Modeling, Systems Integration, Statistical Test Design, Verification and Validation, Reliability Engineering, and Failure Modes Effects Analysis. Proven track record developing complex experiments independently, performing statistical analysis, interpreting experimental results, and making informed recommendations. Apply creative problem-solving skills to novel or complex applications. Ability to self-direct and manage own work Ability to collaborate in multi-disciplinary team settings, influence decision making, and build group consensus. Strong problem-solving and debugging skills and an interest in learning new technologies. Excellent written and oral communication skills Experience implementing and educating others in Design for Six Sigma (DFSS) methodologies is a bonus. At BD, we prioritize on-site collaboration because we believe it fosters creativity, innovation, and effective problem-solving, which are essential in the fast-paced healthcare industry. For most roles, we require a minimum of 4 days of in-office presence per week to maintain our culture of excellence and ensure smooth operations, while also recognizing the importance of flexibility and work-life balance. Remote or field-based positions will have different workplace arrangements which will be indicated in the job posting. For certain roles at BD, employment is contingent upon the Company's receipt of sufficient proof that you are fully vaccinated against COVID-19. In some locations, testing for COVID-19 may be available and/or required. Consistent with BD's Workplace Accommodations Policy, requests for accommodation will be considered pursuant to applicable law. Why Join Us? A career at BD means being part of a team that values your opinions and contributions and that encourages you to bring your authentic self to work. It's also a place where we help each other be great, we do what's right, we hold each other accountable, and learn and improve every day. To find purpose in the possibilities, we need people who can see the bigger picture, who understand the human story that underpins everything we do. We welcome people with the imagination and drive to help us reinvent the future of health. At BD, you'll discover a culture in which you can learn, grow, and thrive. And find satisfaction in doing your part to make the world a better place. To learn more about BD visit ********************** Becton, Dickinson, and Company is an Equal Opportunity Employer. We evaluate applicants without regard to race, color, religion, age, sex, creed, national origin, ancestry, citizenship status, marital or domestic or civil union status, familial status, affectional or sexual orientation, gender identity or expression, genetics, disability, military eligibility or veteran status, and other legally-protected characteristics. Required Skills Optional Skills . Primary Work LocationUSA NC - Durham - Roche DriveAdditional LocationsWork Shift

Senior Solutions Engineer, Enterprise As a Senior Solutions Engineer, you will be the primary technical resource for our Enterprise Accounts team. You will share your product and technical expertise through presentations, product demonstrations, and technical evaluations (Proof Of Values). As the technical expert, you will work with clients to understand their requirements and pain points, then design the right solution for their business needs. During the sales cycle you will guide clients through trials and POVs, demonstrating Sumo Logic's ability to meet and exceed their requirements and building a positive relationship that will provide continuous value to our customers. Finally, you will have the opportunity to work cross-functionally with our Product Management and Engineering teams to share your knowledge and experiences to ultimately improve our business and our customers' success. We seek talent who wants to leverage their technical and people skills to help deliver solutions to clients directly and become a trusted advisor in the process. Above all else, you should be highly self-motivated and extremely curious to learn more Sumo Logic and the vast problems that it can solve. Responsibilities Partner with the Account Executives / Account Managers to understand customer challenges and mains, and articulate Sumo Logic's value proposition, vision, and strategy to customers Technically close complex opportunities through advanced competitive knowledge, technical skill, and credibility Understand and help orchestrate all phases of the sales cycle, including leading technical validations during the Proof of Value phase Be successful working with all levels of an organization, from executives down to individual developers and Site Reliability Engineers Deliver product and technical demonstrations of the Sumo Logic service Work cross functionally with Product Management and Engineering to improve the Sumo Logic service based on your experience with customers Required Qualifications and Skills B.S. in Computer Science, Engineering, or a related field; M.S. in Computer Science, Engineering, or a related field (preferred) 4+ years as a Solutions Engineer (preferred), Solutions Architect (preferred), Sales Engineer (preferred), Implementation Consultant, Support Engineer, Site Reliability Engineer, or a Software Developer with experience leading projects and/or working with customers Hands on knowledge of Security related products, technologies, and sources such as IDS/IPS, SIEM/Log Management, Network / Endpoint Security, Threat Detection, Incident Response, MSSP/MDR, Threat Feeds, CASB, etc Experience with open source collections (Telegraf, FluentBit, FluentD, Open Telemetry, etc.) (preferred) Experience with leading and running technical validations like Proof of Value (preferred) Experience selling and working with pure SaaS solutions in multi-tenant architectures Experience with Amazon Web Services (AWS), Google Cloud Platform (GCP), Microsoft Azure (certification is preferred) A broad background and understanding of technical infrastructure (servers, networking devices, storage, etc.) Modern application architecture (micro-services, containers) understanding and experience working with Kubernetes, Docker, and/or Lambda (preferred) Experience with various monitoring tools like Splunk, Datadog, Elastic, New Relic, etc. (preferred) Comfortable working in a dynamic, fast-paced startup environment and experience at a successful startup (preferred) Strong written and verbal communication skills, as well as business and technical acumen About Us Sumo Logic, Inc. empowers the people who power modern, digital business. Sumo Logic enables customers to deliver reliable and secure cloud-native applications through its Sumo Logic SaaS Analytics Log Platform, which helps practitioners and developers ensure application reliability, secure and protect against modern security threats, and gain insights into their cloud infrastructures. Customers worldwide rely on Sumo Logic to get powerful real-time analytics and insights across observability and security solutions for their cloud-native applications. For more information, visit ****************** Sumo Logic Privacy Policy. Employees will be responsible for complying with applicable federal privacy laws and regulations, as well as organizational policies related to data protection. The expected annual base salary range for this position is $136,000 - $160,000. Compensation varies based on a variety of factors which include (but aren't limited to) role level, skills and competencies, qualifications, knowledge, location, and experience. In addition to base pay, certain roles are eligible to participate in our bonus or commission plans, as well as our benefits offerings, and equity awards. Must be authorized to work in the United States at time of hire and for duration of employment. At this time, we are not able to offer nonimmigrant visa sponsorship for this position. #LI-REMOTE

At Cloudera, we empower people to transform complex data into clear and actionable insights. With as much data under management as the hyperscalers, we're the preferred data partner for the top companies in almost every industry. Powered by the relentless innovation of the open source community, Cloudera advances digital transformation for the world's largest enterprises. We are seeking a highly skilled and motivated Staff Full Stack Engineer (contract position) to join our Product Security team, focusing on the development and enhancement of Heimdall, our internal vulnerability metrics and dashboard capability. This role demands an engineer with end-to-end full lifecycle development experience, adept at translating requirements, UI mockups, and specifications into a robust, reliable product that our internal stakeholders can trust for critical security insights. As a Staff Full Stack Engineer you will… * Learn and Adapt * Get familiarized with Cloudera's products and services end-to-end and gain a full appreciation for the product and development lifecycle. * Understand our open source and proprietary ecosystem, and identify areas for improvement in terms of current CVE remediation efforts. * Design and Development: * Identify tooling and frameworks for improving developer productivity - AI/ML Tools that can expedite in remediating CVE fixes * Design and develop POCs to enterprise-class solutions to enable the delivery of high-quality remediation across the entire customer-facing Cloudera stack. * Process: * Work alongside the product security team to evaluate and enhance existing security tools (SCA, SAST, DAST, etc.) and explore new technologies to improve vulnerability detection and remediation speed/accuracy. * Integrate enhanced security scanning into CI/CD pipelines. * Contribute to the development of a proactive dependency management strategy. * Participate in defining and enforcing clear CVE SLAs and accountability. * Collaboration & Communication: * Work closely with cross-functional teams including Product Security, Engineering Component Teams, QE, Release Engineering, and Customer Support. * Contribute to regular reporting on CVE debt reduction, SLA adherence, and other key metrics. * Actively participate in daily stand-ups and other team meetings. We're excited about you if you have: * Bachelor's or Master's degree in Computer Science, Software Engineering, or a related field. * 5-7 years of experience as a Software Engineer, with a strong focus on security and vulnerability remediation as a big plus. * Strong proficiency in at least two of the following programming languages: Python, Go, TypeScript, React JS. * Proficiency with vulnerability management CVE tooling such as Aquasec, Triaging, and JIRA ticketing. * Hands-on experience with tools like Docker, Maven, SonarQube, Harness, Jenkins, and GitHub Actions. * Experience with relational databases (e.g., Postgres/RDS). * Familiarity with cloud essentials, particularly Kubernetes and AWS. * Experience contributing to open-source projects is a plus. * Excellent problem-solving skills, with the ability to diagnose and resolve complex security issues in large-scale software systems. * Strong communication and collaboration skills, with the ability to work effectively in a cross-functional team environment. * Experience with large-scale software development and testing. This role is not eligible for immigration sponsorship. EEO/VEVRAA #LI-SZ1 #LI-REMOTE

Welcome! Our Growth is Creating Great Opportunities! Our team is expanding, and we want to hire the most talented people we can. Continued success depends on it! Once you've had a chance to explore our current open positions, apply to the ones you feel suit you best and keep track of both your progress in the selection process, and new postings that might interest you! Thanks for your interest in working on our team! Job Summary The Senior Solutions Engineer will be responsible for all pre-sales technical activities supporting our customers and account manaers. This will include but not limited to keeping in close contact with strategic customers as well as partnering with internal teams like Technical Support, Product Line Management, and Business Development. Duties and Responsibilities Collaborate with Sales Solution Engineering team to demonstrate, onboard, and/or support ADTRAN solutions for customer lab trials, field trials, first office applications, and customer demonstrations Assist customers and/or lab personnel in troubleshooting any issues found during product or release evaluations while working with PLM and Engineering to replicate and resolve such issues Attend internal product and technology training to establish working knowledge of ADTRAN solutions and supporting technologies Provide both phone/webinar and on-site support for customer field trials, lab trials, and other situations where there has been an established personal contact with the customer Testing of equipment configurations in support of proposals or specific customer applications Address application related questions or concerns as it relates to ADTRAN products Other projects and assignments may result and be assigned to accommodate the changing needs of the department and the Company Qualifications Basic Qualifications Bachelor's Degree in Math or Science (Engineering preferred) 5+ years of experience working with a Service Provider or telecom/router equipment supplier In-depth knowledge of Layer 2/3 Ethernet technology, switches and routers as well as working knowledge of both SONET/WDM-based networks and data-centric networks/LANs (IP, Fibre Channel) being beneficial Demonstrates proficiency in Windows OS, Microsoft Office: PowerPoint, Excel, Visio, and Word Presentations skills to deliver effective product/solution updates and demonstrations Some travel may be required in this position Preferred Qualifications (Optional) Basic knowledge of Optical and IP/Ethernet networks and access products preferred Experience with GPON, XGS-PON, G.fast access technologies and products along with knowledge of in-home Wi-Fi subscriber solutions Knowledge of provisioning and orchestration systems (incl. protocols such as NetConf, REST and experience in JSON) Strong communication skills, both spoken and written