Staff engineer jobs in Elkhart, IN - 287 jobs

Boyd Gaming Corporation has been successful in gaming jurisdiction in which we operate in the United States and is one of the premier casino entertainment companies in the United States. Never content to rest upon our successes, we will continue to evolve and retain a position of leadership in our industry. Our past success, our current business philosophies and our sound business planning, combine to position Boyd Gaming Corporation to maximize value for our shareholders, our team members and our communities. Job Description Perform maintenance duties within the specified trade skill in all casino/hotel facilities. The Engineer II incumbent will specialize in painting, carpentry, drywall, and wallpaper Qualifications Plans project layouts. Utilize proper personal protective equipment. Responsible for dry-wall repair and preparing surfaces for painting. Job tasks must be finished in a timely manner according to department standards. Follow preventative maintenance schedules on equipment and rooms in assigned areas and document work performed in database using a computer. Respond to guest calls concerning maintenance issues in hotel rooms, on the casino floor, and other areas of the property. Respond to calls from employees concerning maintenance issues in offices, shops, kitchen, laundry, the hotel, and casino. Perform repair and maintenance of equipment. Maintain good housekeeping practices in shops and work areas. Assist Chief Engineer with maintaining machinery and safety items on the vessel. Knowledge of general maintenance procedures. Apprentice level knowledge of skills. Knowledge of state and local code as it applies to his or her trade skill. Ability to apply mathematical concepts such as fractions, percentages, ratios, and proportions to practical situations. Ability to work with mathematical concepts such as probability and statistical inference and fundamentals of plane and solid geometry and trigonometry. Ability to read and interpret documents such as operating and maintenance instructions, procedures manuals, safety rules, blueprints, or schematics. Ability to solve practical problems and deal with a variety of variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral and diagram form. Additional Information Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class. Boyd Gaming is proud to be an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, national origin, religion, sexual orientation, gender identity, status as a veteran, and basis of disability or any other federal, state, or local protected class.

Dometic is a global market leader in the mobile living industry. Millions of people around the world use Dometic products in outdoor, residential, and professional applications. Dometic Land Vehicles Americas is a trusted provider of high-end products for recreational vehicles, commercial passenger vehicles and overlanding vehicles in North America, Latin America, and the Caribbean. We are on a journey of continuous growth - now looking for our next star - a passionate Principal Product Development Engineer within our Engineering capability. This position reports to Director, Engineering Services and will work in Elkhart, IN. About the position As a Principal Product Development Engineer in the Engineering team, you will be involved in designing and developing cutting-edge products that improve the lives of our customers. This position will contribute to the creation of innovative solutions in the field of mobile living. You will be at the forefront of designing and developing groundbreaking products that set new standards in the industry. Your work will not only shape the future of mobile living but also contribute to the seamless integration of technology, design, and functionality. Your main responsibilities Product Development: Collaborate with cross-functional teams to develop new and innovative products, from concept to production. Lead in the design, prototyping, and testing phases. Design and Prototyping: Utilize CAD software and prototyping tools to create detailed product designs, 3D models, and prototypes for testing and evaluation. Analyze existing product designs and propose improvements to enhance functionality, durability, and cost-effectiveness. Testing and Validation: Lead in designing and conducting product tests to ensure compliance with safety, quality, and performance standards. Analyze test results and provide recommendations for improvements. Documentation: Maintain detailed records of design specifications, test plans, and project progress. Prepare technical documentation, including drawings and specifications. Cost Analysis: Lead cost analysis and feasibility studies to optimize product designs for cost efficiency without compromising quality. Quality Assurance: Assist and support the development and implementation of quality control processes to ensure that products meet the highest standards of quality and compliance. Continuous Improvement: Identify and lead opportunities for process improvement and innovation, contributing to the company's culture of continuous learning and development. Collaboration: Collaborate with cross-functional teams, including product managers, manufacturing, quality, and marketing, to ensure the successful launch. What do we offer? You are offered an interesting role in a dynamic, fast paced, and global environment with great opportunities to grow and take on new challenges. The growth at Dometic is continuous - which gives you great possibilities to evolve with the company. Medical/Dental/Vision Insurance Employee Assistance Program (EAP) Disability insurance (STD/LTD) 401 (k) with company match PTO Company defined holidays and two floating holidays for you to use as you choose Paid maternity/paternity leave Tuition assistance Membership reimbursement (wholesale club and gym) Employee discounts on our incredible products Opportunities to make an impact

Together, We Enhance Innovation and Growth i2G specializes in advanced physical electronic security and life safety solutions. I2G has proven experience in surveillance, access control, and intrusion detection systems, biometrics, fence sensors, radars, ground sensors, anti-drone technologies, and more. We excel in design, project management, commissioning, and enterprise technology integrations. i2G's mission is to provide the products and services that meet our customers' needs to give them a vital advantage in today's market, helping to protect what matters most. This position will provide engineering design and support for security solutions for new and existing clients while working alongside internal teams, external teams, clients, and subcontractors to ensure project success. Responsibilities Possess a thorough understanding of standard Electronic Security technology (ACS, IDS, FDS, CCTV) and supporting equipment such as computer software/hardware, databases, and networking infrastructure. Ability to review architectural, electrical, telecommunication, security engineering floor plans, riser drawings, device schedules, and detail drawings. Design, develop, and implement solutions for system installations, upgrades, repairs, and conversions. Review of Field Site Survey documentation and provide technical assistance with RFI/RFP responses. Create solution design documentation (drawings, BOMs, solution design summaries). Provide technical support for in-office and on-site team members. Support management in the process of creating documentation for implementing new technology with new and existing customers. Maintain familiarity with current and emerging electronic security technologies such as access control, video surveillance, intrusion detection, biometrics, etc. and industry leading vendors. Qualifications A minimum of 3-7 years previous experience in the industry. Associate or bachelor's degree in relevant field preferred or applicable amount of experience in the appropriate field may be substituted for the educational background. Experience in the design and planning of access control and video systems. Professional Electronic Security Certifications or training (Lenel, Genetec, C-Cure. Avigilon, Axis, Bosch, Milestone, etc.) preferred. Other Eligibility Requirements Ability to manage time and multiple tasks without supervision. Organizational skills & detail oriented. Good analytical and problem-solving skills. Excellent presentation, writing skills, verbal, and written customer communication skills. Experience in computer programs such as Microsoft Office, Adobe, etc. preferred. Microsoft Project, Visio, BlueBeam, AutoCAD, or Revit is a plus. Company Overview This is a Security Systems Engineer job opportunity with i2G Systems. Learn more about i2G: *************************************** "Kastle Systems Makes Strategic Investment in i2G Systems, Strengthening Leadership in Serving High-Security Industries and High-Value, Large Scale Facilities" Read More About the Partnership Here: ***********************************************************************************************************************************************************************************

Collabera is ranked amongst the top 10 Information Technology (IT) staffing firms in the U.S., with more than $525 million in sales revenue and a global presence that represents approximately 12,000+ professionals across North America (U.S., Canada), Asia Pacific (India, Philippines, Singapore, Malaysia), and Europe (Ireland, Netherlands, Poland, United Kingdom). We support our clients with a strong recruitment model and a sincere commitment to their success, which is why more than 75% of our clients rank us amongst their top three staffing suppliers. Not only are we committed to meeting and exceeding our customer's needs, but also are committed to our employees' satisfaction as well. We believe our employees are the cornerstone of our success and we make every effort to ensure their satisfaction throughout their tenure with Collabera. As a result of these efforts, we have been recognized by Staffing Industry Analysts (SIA) as the “Best Staffing Firm to Work For” for five consecutive years since 2012. Collabera has over 50 offices across the globe with a presence in ten countries and provides staff augmentation, managed services and direct placement services to global 2000 corporations. For consultants and employees, Collabera offers an enriching experience that promotes career growth and lifelong learning. Visit ***************** to learn more about our latest job openings. Awards and Recognition --Staffing Industry Analysts: Best Staffing Firm to Work For (2016, 2015, 2014, 2013, 2012) --Staffing Industry Analysts: Largest U.S. Staffing Firms (2016, 2015, 2014, 2013) --Staffing Industry Analysts: Largest Minority Owned IT Staffing Firm in the US. Job Description Responsibilities: A Fortune 500 manufacturing and aerospace giant looking for Product Manufacturing Engineer who will be responsible for the producibility, capability, efficiency of each product and process in the facility. The Senior Product Manufacturing Engineer will use Six Sigma tools to improve processes to reduce part cost and Cost of Poor Quality. Qualifications · Minimum Bachelor in Mechanical Engineering, Industrial Engineering, or similar discipline with 3-5 years of relevant experience · 3-5 years Manufacturing Engineering Experience · Process Control experience desirable. · Six Sigma Black Belt preferred Additional Information If you want to know more and apply, please connect with: Niraj Singh **************************** ************ ***********************************************

Direct Hire Salary Manufacturing Engineer - Direct Hire - Bristol, IN $65,000-75,000/yr Design, develop, and implement manufacturing processes for current and future product lines. Continuously analyze and improve production systems to reduce waste and boost efficiency. Lead and manage engineering projects from concept through completion, ensuring timely delivery. Collaborate with cross-functional teams to troubleshoot and resolve design or production challenges. Drive cost-saving initiatives while maintaining high quality and safety standards. Prepare, review, and maintain technical documentation including drawings, reports, and specifications. Stay current on new technologies and industry best practices to innovate and enhance product designs. Requirements: Education: Bachelor's degree in Mechanical Engineering, Automotive Engineering, or a related field. Experience: Minimum 5 years of experience in vehicle or trailer design, manufacturing, or related industries. Technical Skills: Proficiency in CAD software (AutoCAD, SolidWorks) and understanding of electrical systems. Preferred Certifications: SolidWorks, Lean Six Sigma. Technology Skills: Experience with MS Office, Sage X3 is a plus. Soft Skills: Strong problem-solving abilities, excellent communication skills, and a collaborative team player. Physical Requirements: Ability to lift up to 25 pounds regularly and up to 50 pounds occasionally, with extended periods of standing or walking. Specialized Staffing Solutions, LLC. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status.

Job Title Business Unit Department Reports To Product Design Engineer Chore-Time Engineering Engineering Manager BU Location BU Acceptance Approved By: Date Approved Milford, IN Overall Purpose: Why the Job Exists & What You Will Do: As the Product Design Engineer, you will design, develop, and create innovative poultry components and equipment to meet customer expectations and business goals. Essential Job Functions & Expected Outcomes: Your Accountabilities in the Role Product Design & Development: 100% of the Job Communicates and collaborates with customers, dealers, and network to establish product needs within the industry, as well as research competitive product lines, to create new or enhanced products that will drive business goals. Manages the design, layout, specifications, and testing of new or enhanced products, work with sheet metal and plastics, work with internal and external manufacturing to ensure the quality, timing, resources, and costs meet the overall expected results of the project. Leads, collaborates, and communicates with project team members to direct the detailed product design and implementation, ensuring a best practice approach for optimal implementation results. Travels to assist with product installments, meetings, and trade shows through the U.S. and Internationally to ensure the Voice of the Customer is integrated in every part of the processes. The job criteria may include other duties, responsibilities and activities, which may change or be assigned at any item with or without notice. Position Requirements: Education: Bachelor's Degree in Mechanical or Agricultural Engineering, or a related field; will also consider an equivalent combination of education and experience. Experience: 2+ years of experience with plastic part design, ventilation, fluid mechanics, or product design within an agricultural or farming environment preferred; will consider an entry level person with strong aptitude for the role preferably with related experience/understanding of poultry husbandry and housing. Certification(s): N/A Functional Skills: Strong foundational understanding of engineering and mechanical principles to design parts that include motors, mechanical power components, sheet metal parts, injection mold and extruded plastic parts, material flow, air movement/cooling systems, and movement of material (i.e. feed, eggs, and waste). The position requires strong analytical, problem-solving, conceptual, project management, time management, and organizational skills to take ideas, design a product, and execute to meet market needs. A familiarity with CE European product standards would be a plus. Technology Aptitude/Skills: Strong skill set in AutoCAD/3D CAD programming (Inventor/Vault); ERP system experience is a plus (Oracle preferred); Advanced Microsoft Office Skills (Word, Excel, Teams) required as well. Language Skills: Excellent verbal and written communication skills; will present ideas and outlines to management team, vendors, and customers. Leadership/Behaviors: Ability to work with an experienced team, who is collaborative and supportive. Can learn quickly to move past barriers and be a strong influencer to get things done to own the role. Culture Match: Excellent abstract thinking; creative, conceptual thinker with a solid common-sense approach to create solutions and push through obstacles. High integrity, Dependability, who can handle confidential information well. Will also be Customer-Focused, Cost Conscious, Strives for Excellence, and can thrive in a fast-paced environment. Will also be able to visit farms and interact with customers in a professional, well-received way. Core Values that Apply to All Positions: Integrity in all things Customers are why we exist Profitability is a must Excellence in all we do People make the difference Equipment Used: This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and similar machines. This role will often use laboratory testing equipment, measuring instruments, waterjet, 3d printer, and other mechanical equipment to produce prototype and/or test equipment. Physical Requirements to Perform Essential Functions: Ability to operate a motor vehicle as needed for travel in the role Ability to sit at desk for 5+ hours per day Ability to operate keyboard and view computer screen for majority of day 6-7 hours Ability to write ideas/information in a logical flow for 5+ hours per day Ability to read and respond on an on-going basis daily due to nature of the work, throughout the day Ability to read, write and speak English fluently Ability to communicate with others via phone, in-person, and computer on-going Ability to listen to customers, problem-solve, and respond accordingly Ability to sit, stand, bend, reach, kneel, squat, twist, push, pull, walk, stoop, crouch, and carry items frequently Lifting up to 15 lbs. sporadically Environmental Conditions & Travel: The employee is primarily exposed to a normal office environment with moderate noise. The employee is occasionally required to wear suitable Personal Protective Equipment while visiting manufacturing departments and client locations. Testing and engineering lab environment with machines and equipment related to prototyping and testing. This position may be occasionally exposed to animals, dust, and dirt when visiting client locations. This position may face inclement weather conditions when traveling. Travel: 10 - 20% travel is required (Domestic & International) I have reviewed and understand the above . I understand that the company may change this as it deems necessary and at its discretion. I also understand that a copy of this job description is available to me through request to my manager or Human Resources department. Employee Name (Print) Employee Signature Date

Full-time Description Join Horizon Construction Group Inc. as a Project Engineer and be part of a thriving team! Our unwavering commitment to our team has earned us the honor of being a Top Workplace for the sixth consecutive year, highlighting our dedication to fostering a supportive and dynamic work environment. In 2024, we set a company record by breaking ground on 2,900 multifamily units throughout the Midwest, leading to our recognition as a Top 25 Builder by the National Multifamily Housing Council, ranking #15. This achievement underscores our strength and stability in the industry. As a 2025 Platinum Level STEP Award winner through ABC-WI, we prioritize safety and quality in all our projects. At Horizon Construction Group Inc., you'll be able to grow professionally, work on exciting projects, and be part of a team that values your contributions. Join us and build a brighter future together! Construction Management Collaborate with department representatives, architects, engineers, and consultants to establish project requirements, specifications, and schedules. Assist with development and approval of architectural and engineering construction drawings. Support construction and permitting processes. Prepare and review bid documents; assist with solicitation. Aid in negotiation and enforcement of contractual requirements with contractors, architects, and vendors. Monitor and maintain project schedules and timelines. Inspect projects for compliance with design specifications. Assist with project planning, scheduling, and communication regarding milestones and resource allocation. Support estimating, forecasting, and financial review of job cost reports. Track invoices, change orders, and purchase orders for accuracy and deadlines. Participate in project start-up, subcontractor, and progress meetings. Assist Project Managers in monitoring costs, budget variances, and expenditures. Field Operations (may include one or more of the following) Support site quality control and audits to ensure compliance with specifications and standards. Assist with punch list development, documentation, and execution. Help schedule project staff weekly/bi-weekly. Support safety management and compliance with regulations and codes. Identify, report, and implement corrective actions for non-compliance and safety hazards. Project Coordination Maintain updated plans and specifications; distribute bulletins and addendums to relevant parties. Insert plan/spec information into contract forms for processing. Track warranty and punch list procedures; report progress to Project Managers and Owners. Assist with documentation for Operations and Maintenance Manuals, including “as-built” plans. Manage contracts, submittals, RFIs, and change orders within project management software. Prepare and distribute project status reports, meeting agendas, and minutes. Generate monthly reports for Project Managers. Special Projects Bid Coordination: Assist with bid document preparation and review. Maintain subcontractor and bidder lists; utilize Pantera for notifications and updates. Upload documents and addendums; follow up with subcontractors. Support bid day activities and post-bid follow-up internally and externally. Estimating: Gather and compile data for conceptual and bid proposal estimates. Perform accurate takeoffs using Stack Estimating. Analyze subcontractor bids for completeness and risk. Assist with internal bid support and routine estimates. Maintain accurate subcontractor and supplier information. Provide administrative support for estimating processes. Requirements Education and Experience Bachelor's degree in civil engineering, Construction Management, or a related four-year program (preferred). Experience in construction project engineering or similar roles (preferred). Knowledge of construction practices, techniques, ADA Title III, contract law, project controls, and building support systems. Familiarity with construction safety regulations, building codes, and industry standards (helpful). Demonstrated ability to provide excellent internal and external customer service. Previous leadership experience. Required Knowledge and Skills Strong attention to detail, analytical skills, and computer literacy. Ability to deliver quality work within deadlines, with or without direct supervision. Professional interaction with employees, customers, and suppliers. Effective teamwork and independent work skills, with clear communication and coordination. Strong organizational abilities. Competence in reading and interpreting documents and writing clear documentation and correspondence. Ability to calculate figures and amounts. Capability to follow detailed oral or written instructions. Other Qualifications Proficiency in construction software (e.g., Procore, Primavera, Microsoft Project, Microsoft Office Suite). Willingness to work both in-office and on project sites, including travel and overnight stays as needed. Flexible schedule, including weekends, nights, and extended hours (average 50-60 hours per week). Valid driver's license, insurance, and reliable transportation. Physical Demands and Work Environment The physical demands and work environment characteristics described here represent those required to perform the essential functions of this job. Reasonable accommodations may be made for individuals with disabilities. While performing job duties, the employee is regularly required to sit, stand, write, and operate a computer, standard office equipment, and a telephone. Frequent communication with customers is expected. The employee will often move about and reach for items and may occasionally lift or move up to 25 pounds. Salary Description 65,000-85,000

A Manufacturing Engineer would be responsible for the design, development, and implementation of the manufacturing processes. Ensuring the production of restroom trailers and related products are done safely, effectively, and efficiently. While implementing cost saving initiatives and maintaining quality standards. Essential Duties and Responsibilities: Design, develop, implement and test current and new product lines Analyze existing systems and processes to identify value-added and non-value-added activities to help solve design challenges Identify opportunities for preventing waste and inefficiencies during production Manage engineering projects in a timely manner and through the life of the project Utilizes engineering principles and methods to designs to ensure the safety, reliability, efficiency, and quality of products Prepare and review technical specifications, drawings, calculations, reports, and documentation Collaborate with other engineers, managers and production workers, and outside personnel to design and apply new systems and processes while providing technical support and guidance Investigate and troubleshoot system failures, malfunctions, defects, or complaints Performs extensive testing and validation of designs to ensure reliability, performance, quality, and safety standards Conducts and analysis research while studying new technologies to innovate and design solutions or products Comply with all applicable codes, standards, regulations, and policies QUALIFICATIONS: Education: A degree in Mechanical Engineering, Automotive Engineering, or a related field Experience: Minimum of 5 years of experience in vehicle and/or trailer design Certifications: SolidWorks and Lean six sigma would be a plus Technical Skills: Proficiency in CAD software (AutoCAD, SolidWorks) and electrical systems MS Office experience, preferred knowledge of Sage X Problem-Solving: Strong analytical and problem-solving skills with the ability to develop creative and practical solutions Communication: Excellent verbal and written communication skills, with the ability to convey complex technical information clearly Attention to Detail: High level of accuracy and attention to detail in all aspects of design and documentation Team Player: Ability to work effectively in a collaborative team environment Self-discipline, willingness to learn and flexibility required, with the ability to work independently Physical Demands: The associate may lift and/or move up 25 pounds and occasionally lift and/or move up to 50 pounds. Stand and walk for long periods of time. MUST HAVE Degree in Mechanical Engineering, Automotive Engineering, or a related field Minimum of 5 years of experience in vehicle and/or trailer design. Working knowledge in CAD software (AutoCAD, SolidWorks) and electrical systems MS Office experience. Experience in all aspects of design and documentation. NICE TO HAVE Certifications: SolidWorks and Lean six sigma would be a plus. Preferred knowledge of Sage X

At Conn Selmer, we're passionate about music and dedicated to producing the highest-quality instruments for musicians of all skill levels. As a member of our organization, we seek candidates who possess the following values: Integrity, Excellence, Teamwork, Inclusivity, and Innovation. Please see our Conn Selmer website (******************* for more information about who we are. The Manufacturing Engineer supports the reduction of manufacturing cost while increasing productivity using developed manufacturing skills under the direction of the Engineering Manager. Design and implement manufacturing tooling and fixtures in support of manufacturing requirements. Implement and control optimized manufacturing processes to ensure consistent productivity Responsibilities: Determine operations required to procedure products and develop processes to ensure quality, cost and efficiency requirements are met. Analyze production processes, procedures, tooling and equipment to determine capacity to perform at required level Develop and implement LEAN work cells and material flow Actively participate in Kaizen support efforts Process improvements that result in realized cost savings Provide expertise in areas of machining, material flow and process flow Develop innovative ideas and alternative methods to be cost competitive Construct RFE's with ROI Assist with value stream mapping and utilization calculations Calculate Overall Equipment Effectiveness (OEE) and drive gains Working with Quality to determine, eliminate and sustain root cause Working with Quality to train operators on new processes or equipment Experience designing and developing fixtures and tooling for manufacturing effectiveness SolidWorks experience Tooling experience if possible Tooling and fixture design Design, maintain & improve manufacturing processes to optimize quality & efficiency while reducing cost Review, calculate & maintain material & labor costs for BOMs & routings Understand of D365 ERP system Analyze & plan efficient production workflow utilizing best practice methods & engineered time standards Develop of Standard Operating Procedures & Operational Control Plans Other duties as assigned by supervisor Qualifications: 4-year Engineering degree (mechanical or industrial) or 8 years of Engineering experience as a process or manufacturing engineer without degree 5 years' experience in manufacturing preferably in metal fabrication, or machining intense environment Demonstrated ability to analyze Takt times for improved efficiency and utilization Mechanical acumen (hands-on knowledge of mechanics) Strong communication skills, written and oral Proven experience in LEAN and Six Sigma techniques and practices CNC experience a plus Music Experience a plus Ability to lift 50 pounds Requires periods of sedentary work, daily standing and walking on shop floor Requires repetitive upper body movement - keyboard and monitor use Visual and hearing acuity

At Conn Selmer, we're passionate about music and dedicated to producing the highest-quality instruments for musicians of all skill levels. As a member of our organization, we seek candidates who possess the following values: Integrity, Excellence, Teamwork, Inclusivity, and Innovation. Please see our Conn Selmer website (******************* for more information about who we are. The Manufacturing Engineer supports the reduction of manufacturing cost while increasing productivity using developed manufacturing skills under the direction of the Engineering Manager. Design and implement manufacturing tooling and fixtures in support of manufacturing requirements. Implement and control optimized manufacturing processes to ensure consistent productivity Responsibilities: * Determine operations required to procedure products and develop processes to ensure quality, cost and efficiency requirements are met. * Analyze production processes, procedures, tooling and equipment to determine capacity to perform at required level * Develop and implement LEAN work cells and material flow * Actively participate in Kaizen support efforts * Process improvements that result in realized cost savings * Provide expertise in areas of machining, material flow and process flow * Develop innovative ideas and alternative methods to be cost competitive * Construct RFE's with ROI * Assist with value stream mapping and utilization calculations * Calculate Overall Equipment Effectiveness (OEE) and drive gains * Working with Quality to determine, eliminate and sustain root cause * Working with Quality to train operators on new processes or equipment * Experience designing and developing fixtures and tooling for manufacturing effectiveness * SolidWorks experience * Tooling experience if possible * Tooling and fixture design * Design, maintain & improve manufacturing processes to optimize quality & efficiency while reducing cost * Review, calculate & maintain material & labor costs for BOMs & routings * Understand of D365 ERP system * Analyze & plan efficient production workflow utilizing best practice methods & engineered time standards * Develop of Standard Operating Procedures & Operational Control Plans * Other duties as assigned by supervisor Qualifications: * 4-year Engineering degree (mechanical or industrial) or 8 years of Engineering experience as a process or manufacturing engineer without degree * 5 years' experience in manufacturing preferably in metal fabrication, or machining intense environment * Demonstrated ability to analyze Takt times for improved efficiency and utilization * Mechanical acumen (hands-on knowledge of mechanics) * Strong communication skills, written and oral * Proven experience in LEAN and Six Sigma techniques and practices * CNC experience a plus * Music Experience a plus * Ability to lift 50 pounds * Requires periods of sedentary work, daily standing and walking on shop floor * Requires repetitive upper body movement - keyboard and monitor use * Visual and hearing acuity

Tri-City Group is currently seeking a Project Engineer for an immediate opening in South Bend, IN, The Project Engineer is responsible for on-site administrative and technical support on construction project sites. Responsibilities include but are not limited to: Complete projects on time, within budget and meet the quality demands of our clients Assist in research and documentation of the procurement of all major equipment packages Help with the tracking of progress and adherence of the scope of all sub-contractors to be utilized Assist in the management (scheduling and receiving direction) of all owners furnished equipment Assist in the logistics of all major package delivery and storage Administratively support the tracking and logging of all information required within the Procurement, Quality Assurance, Quality Control, and Commissioning activities under the direction of the Project Manager Support the Project Manager in all areas including, procurement, purchasing, subcontract and lease agreements, and equipment tracking Maintain Company presence during project meetings - Jobsite construction and coordination meetings Assist in tracking project schedule utilizing Primavera P6 software Assist in gathering documentation for field testing and owner acceptance Assist in closeout documents Assist in tracking and scheduling final punch list items Assist in scheduling and documenting Owner training Work with PMAs on submitting proper documentation for projects Assist in the shop drawing review process Qualifications: Bachelor's degree in engineering or construction management 1 or more years of related experience in Construction Administration, Construction management, and/or related education and experience. Excellent written and verbal communication skills Knowledge of Primavera P6 is a plus. OSHA 30 (preferred) If not certified, willingness to obtain upon hire. Candidates must possess strong attention to detail, tact, and consideration, a focus on accuracy, solid communication skills, positive initiative, and judgment, the ability to problem-solve and meet deadlines, self-motivation, business acumen, and organization. All job offers are contingent upon completing a successful drug screen and reference check. Tri-City Group is an equal opportunity employer.

Electronics Engineer - Contract DISHER is seeking an experienced Electronics Engineer for our customer in Portage, MI. They are a global leader in medical technologies and are driven to make healthcare better. What it's like to work here:Make a positive difference! It's why we exist. We are always looking for teammates who are eager to use their diverse set of talents with our customers, coworkers, and communities. We want to leave this world better than we found it.What you will get to do: The engineer would be responsible for Electronics Manufacturing of 4 Printed Circuit Boards, wiring harnesses, connectors and connection to internal battery power. Travel to supplier (estimating 3 to 5 times over the 6-month project duration) would be periodically necessary to support this project. Documentation of process development and validations will be needed to complete full integration of designed components to bridge in Verification and Validation activities (process development, process validation, production documentation) Review of prior project learnings and outputs PCB schematics and documentation input Electronics and assembly of prototypes Lead manufacturing support during spins with supplier Process development for the boards Detailed electrical documentation Work closely with internal and contract manufacturers to develop processes for electro-mechanical assembly including PCBA manufacturing, potting, soldering, pressing, plastic injection molding, torquing and manual assembly Lead or support capital acquisition activity from specifying equipment, contract negotiation, installation, and validation Ensure quality of process and product as defined in the appropriate operation and material specifications Select equipment based on analysis of specifications, reliability, and regulatory requirements Work with quality engineers to develop component specific testing and inspection protocols Analyze equipment to establish operating data, conduct experimental test and result analysis Lead and/or participate in process review meetings. Participate in Process Failure Mode and Effect Analysis (PFMEA), Control Plan, SOP and Production Part Approval Process (PPAP) generation associated with launches Complete capability studies for in-process inspection and generate subsequent Inspection documentation Review and approval of validation documentation What will make you successful: PCBA / DEMF / Testing experience. Review of electronics documentation and able to provide detailed inputs - Fabrication Drawings - Mechanical Layout - Schematics Process Knowledge of Printed Circuit Boards and DFM of these Experience with electrical test specifications and equipment Experience with electronics validations Experience with detailed documentation to support electronics production in a regulated industry

Masterbilt Incorporated is entering an exciting phase of expansion, with operations spanning across Indiana, Arizona, and California. We are seeking a dynamic and innovative Manufacturing Engineer with extensive experience in both CNC manufacturing and automation. If you are passionate about precision engineering and thrive in high-speed, growth-oriented environments, we want to hear from you! About Us: At Masterbilt, we operate through two specialized divisions: Masterbilt Precision Machining provides the aerospace, defense, and medical device industries with high-precision components and assemblies. Extreme accuracy is our standard. By leveraging advanced manufacturing techniques, lean deployment, and flow analysis, we efficiently utilize our extensive CNC and specialized equipment to meet your unique design and production requirements. Masterbilt Automation Systems combines meticulous craftsmanship with industry-leading machine design and project management techniques. We design and build complex automated assembly machinery, aiming to cut production time and deliver outstanding product quality and value. Our systems are engineered for maximum reliability and simplified maintenance, ensuring top-tier performance. Requirements Key Responsibilities: Develop, maintain, and improve manufacturing processes for high-precision components and assemblies in CNC machining. Leverage advanced automation technologies to design and build custom automated systems for assembly, testing, inspection, and processing. Utilize CAD/CAM software for part modeling, process drawing development, and CNC programming. Create and maintain detailed process documentation, including PFMEAs, flow charts, process sheets, operator standard work instructions, and visual controls. Design and develop fixturing for proper work holding on various lathes and mills. Monitor operations, troubleshoot processes, and optimize tool performance to ensure strict adherence to quality standards. Maintain safe and efficient operations by adhering to safety procedures and conducting regular equipment maintenance. Act as a liaison between customers, vendors, and internal departments to ensure seamless project execution. Travel up to 15% to other divisions in Phoenix, AZ, and San Diego, CA. Qualifications: Extensive experience in CNC manufacturing and automation. Proficiency in interpreting geometric dimensions and tolerances (GD&T) and in using CAD/CAM software. Strong understanding of machine shop equipment, including CNC machines, their functions, and capabilities. Excellent problem-solving skills and the ability to troubleshoot and optimize manufacturing processes. Strong communication skills and proficiency with Microsoft Office Suite. A results-driven mindset with a passion for innovation and continuous improvement. Physical Demands: This position may require standing, walking, bending, reaching, and the use of hands and fingers. The employee may be required to lift and/or move items up to 50 pounds. Other Information: Normal work hours are 7:00 AM - 3:30 PM. This position has no supervisory responsibilities. Why Masterbilt? At Masterbilt, we are committed to delivering precision and excellence in everything we do. Our advanced manufacturing and automation capabilities allow us to meet the most demanding industry standards. If you have a strong background in CNC manufacturing and automation, and you're eager to contribute to a company that values innovation and quality, we encourage you to apply.

We are looking for a talented and experienced Product Design Engineer to join our team. The ideal candidate will have a passion for designing and developing innovative products that meet customer needs. This is a direct position Michigan City, Indiana with a publicly traded supplier to the commercial vehicle market. In this position, you will design new wiper systems, control products, commercial vehicle electronics and components. RESPONSIBILITIES: \- Manage design projects from concept through production. \- Collaborate with cross\-functional teams to design and develop new products from concept to production \- Conduct research and analysis to identify customer needs and market trends \- Create detailed product specifications and design documentation \- Develop and test prototypes to ensure product quality and reliability \- Work closely with manufacturing teams to ensure products are manufactured to meet design specifications \- Continuously evaluate and improve product designs based on customer feedback and market trends \- Prepare original\/revised design layouts based on customer CAD data and specifications. \- Prepare cost estimates for new or revised designs. \- Develop, document, implement departmental procedures in accordance with IATF 16949 and ISO 14001 requirements. \- Maintain current knowledge of sound engineering practices, manufacturing processes, FMVSS regulations, and SAE or other applicable standards. \- Apply knowledge of drafting techniques, engineering procedures, and CAD system to identify most effective methods, equipment, and processes. \- Verify designs for design intent, specifications, and quality. \- Provide technical product expertise to all internal\/external relationships. Requirements \- Bachelor's degree in Mechanical Engineering, Industrial Design, or related field \- 2 \-5 years of experience in product design and development \- Strong knowledge of CAD software and 3D modeling tools (CATIA, CREO, NX or similar) \- Experience with rapid prototyping and testing \- Excellent problem\-solving and analytical skills \- Strong communication and collaboration skills \- Ability to work independently and as part of a team \- Additional courses or experience in CAD Design methods, FEA, Kinematics, simulation tools, and mechanisms desirable as appropriate to the position. \- Strategic thinker - mindful of overall company\/corporate goals \- Travel Requirements: must be able to fulfill occasional travel, domestic & international, to other facilities, customers, and vendors. WORK AUTHORIZATION \- Applicants must be currently authorized to work in the United States on a full\-time basis. "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"691829330","FontFamily":"PuviRegular","job OtherDetails":[{"field Label":"Work Experience","uitype":2,"value":"2\-5 years"},{"field Label":"Industry","uitype":2,"value":"Research & Development"},{"field Label":"City","uitype":1,"value":"Michigan City"},{"field Label":"State\/Province","uitype":1,"value":"Indiana"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"46360"}],"header Name":"Product Design Engineer \- Commercial Vehicle Wiper Systems","widget Id":"**********00072311","is JobBoard":"false","user Id":"**********00258003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":true,"job Id":"**********23623098","FontSize":"15","location":"Michigan City","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do"}

We are seeking a highly skilled and detail-oriented Manufacturing Engineer with a strong focus on CNC programming, fixture design, and tool selection. This role is instrumental in developing, improving, and supporting manufacturing processes, ensuring optimal machining efficiency and quality. The ideal candidate will bring a deep understanding of CNC machine tools, cutting strategies, and workholding design, and will play a key role in launching new products and improving existing workflows. Key Responsibilities: Develop, document, and optimize CNC programs for lathes and multi-axis milling machines using industry-standard software. Design fixtures and tooling required to efficiently manufacture components to tight tolerances. Select appropriate cutting tools and materials based on geometry, material type, and production volume. Create detailed setup sheets and process documentation for machinists, including tooling requirements and machining strategies. Evaluate and improve existing manufacturing processes for cost reduction, cycle time improvement, and enhanced part quality. Analyze and interpret engineering drawings and 3D models for both rough castings and finished parts to guide process development. Work closely with production staff to troubleshoot machining issues and optimize setup times and tool life. Collaborate cross-functionally with managers, shop personnel, vendors, and customers to ensure manufacturing processes meet customer specifications. Support new product introductions by developing efficient and repeatable machining processes. Travel occasionally to customer and supplier sites for technical support and project collaboration. Qualifications Qualifications: Proven experience in CNC programming for lathes and multi-axis mills. Strong background in fixture design and tool selection for precision machining. Proficient understanding of Geometric Dimensioning and Tolerancing (GD&T). Excellent ability to read and interpret blueprints and technical drawings. Strong machining fundamentals, including material properties, speeds/feeds, and cutting strategies. Familiarity with CAD/CAM software (e.g., Mastercam, Fusion 360, NX, etc.) is a strong plus. Effective communication skills, both written and verbal. Proficient in Microsoft Office Suite and general computer literacy. College degree in manufacturing, mechanical engineering, or a related field preferred, though equivalent experience will be equally considered. Bonus Qualifications: Experience with robotics and automation systems. Knowledge of Lean Manufacturing and 5S principles. Familiarity with Environmental, Health, and Safety (EHS) standards. Special Requirements: Must be flexible to work variable hours and be available on-call as needed. Ability to thrive in a fast-paced, dynamic manufacturing environment. Communication Expectations: Regular use of email, phone, and written communication. Frequent collaboration with cross-functional teams, including face-to-face meetings. Physical Requirements: Ability to stand, squat, twist, and bend as needed in a shop environment. Capability to sit for extended periods for programming and documentation tasks. Occasional lifting of up to 50 lbs. Manual dexterity required for computer work and hands-on technical tasks.

Unleash the Power of Multi-Mission Excellence: Safeguarding the Seas for the World's Navies. Step into a world where cutting-edge technology meets unparalleled expertise. Ultra Maritime pioneers delivering multi-mission solutions that protect and empower the naval forces worldwide. With our extensive portfolio of capabilities, our innovations are utilized on naval fleets across our allied navies around the globe. As the maritime and underwater battlespace evolves, we tirelessly push the boundaries to develop advanced specialist systems that provide our 'five-eyes' Defense customers with an unbeatable warfighting edge. From surface vessels to sub-surface operations and unmanned platforms, we are revolutionizing the way naval missions are executed. We thrive on collaboration and partnering with our customers to ensure mission success. Our expert solutions encompass an array of game-changing technologies, including state-of-the-art sonar, radar, and expendables. Join us in shaping the future of naval warfare and together, we will safeguard the seas and empower navies worldwide! The Materials Science Engineer - Materials & Process Expert will lead, and support research, development and production activities focused on advanced materials for defense and undersea applications. This individual will apply expertise in chemicals, materials processes and characterization to solve complex technical challenges and ensure high-performance materials solutions for DoD customers. Nationality Requirements Candidates must be eligible to obtain the relevant security clearance required for the role, due to the nature of the programmes we deliver for our customers. Job Description At Ultra Maritime, we specialize in cutting-edge maritime defense technologies that safeguard naval fleets and ensure mission success. Our teams engineer advanced systems and materials that operate reliably in the world's most demanding environments. We are currently seeking a Chemical or Materials Engineer with a ceramics and materials science background to join our growing materials engineering group supporting next-generation naval systems. Key Responsibilities * Lead materials selection, testing and implementation. Responsible on optimization efforts for ceramics, composites, and coatings used in maritime defense systems. * Conduct root cause analysis and failure investigations for material and process issues. * Perform laboratory and analytical testing; interpret and report data with scientific rigor. * Collaborate with cross-functional engineering, manufacturing, and quality teams to scale materials from concept to production. * Support DoD program requirements, technical documentation, and secure project execution. * Develop technical reports, proposals, and presentations for internal and customer stakeholders. * Utilize Microsoft Office Suite and related tools for documentation, analysis, and project management. * Travel up to 15% for supplier engagement, testing activities, and program reviews. Required Qualifications * Bachelor's degree (or higher) in Chemical Engineering or Materials Science Engineering. * 10+ years of experience in materials, manufacturing processes, potting materials/process of ceramics and chemical/primers used to improve bonding. * Hands-on experience with ceramic materials, composites, or coatings (processing, sintering, or characterization). * Proven ability to perform root cause analysis, materials failure assessments, and data-driven decision-making. * Proficient in Microsoft Office (Excel, Word, PowerPoint, Project). * Strong written and verbal communication skills, with ability to prepare detailed technical documentation. * U.S. citizenship required; must be eligible for a DoD Security Clearance. Preferred Qualifications * Experience supporting DoD, Navy, or defense-related R&D programs. * Familiarity with materials testing and characterization (SEM, EDS, XRD, DSC, etc.). * Working knowledge of AS9100 or ISO 9001 quality standards. * Experience with product life cycle systems * Background in chemical process scale-up or pilot-scale materials development. * Strong analytical and research skills with an emphasis on applied materials, adhesives and manufacturing processes. #MAR #LI-KP1 #LI-onsite Diverse & Inclusive Employer Ultra Maritime is a proud Equal Opportunity Employer committed to fostering a respectful, and diverse workplace. We welcome applicants from all backgrounds and do not tolerate discrimination of any kind. Employment decisions are made without regard to race, color, religion, sex (including pregnancy, childbirth, and related medical conditions), sexual orientation, gender identity or expression, age, national origin, ancestry, ethnicity, marital status, disability, genetic information, protected veteran status, citizenship status, or any other characteristic protected by applicable federal, state, or local laws. As a defense contractor, we are dedicated to maintaining the highest standards of integrity and security. We operate a drug-free workplace and, where permitted by law, conduct pre-employment background checks and substance abuse screening. We offer competitive benefits including medical, dental, vision, 401k match, paid time off and family leave, and much more! Reasonable accommodation statement: if you need an accommodation for any part of the application process, please email ************************ Company: Ultra Maritime

Job Title: Manufacturing Engineer JJob Summary: The Manufacturing Engineer is responsible for developing and optimizing CNC programs, supporting new product launches, and improving machining processes to ensure production efficiency and quality. This role involves designing tooling and fixtures, preparing process documentation, and collaborating with cross-functional teams to implement cost-effective manufacturing solutions. The engineer also provides technical support to production, leads continuous improvement initiatives, and works closely with vendors and customers to resolve issues and drive innovation. Engineers also offer guidance and support to Engineering Technicians. Responsibility Develop and improve CNC machine programs. Take new products from concept to production stage. Design and create CAD drawings for tooling, gauges, and fixtures. Select and specify tooling and fixtures for machining processes. Prepare process sheets detailing tooling and setup requirements. Establish cycle times and ensure processes meet part specifications. Provide technical support for production operations. Create functional specifications for assembly operations and sign-off on integrator design Lead or participate in continuous improvement initiatives. Research and report on requirements for new production processes (cost, labor, tooling, equipment). Supervise buy-off of equipment and support equipment implementation. Collaborate with vendors and customers for problem resolution and tooling improvements. Create and maintain schedules to track process development and project progression. Academic/Educational Requirements Bachelor's degree in mechanical engineering, Industrial Engineering or related field. Required Skills/Experience 4-6 years in a machining or manufacturing environment, with hands-on involvement in CNC operations, process development, and tooling. Strong understanding of manufacturing processes, techniques, and methodologies. Proficient in CAD/CAM software and design tools including AutoCAD, SolidWorks, and Mastercam. Skilled in manufacturing simulation, statistical analysis, and ERP/MES systems such as Plex. Experienced in developing technical proposals and presenting findings to stakeholders. Capable of leading new product introductions and continuous improvement initiatives. Adept at creating and maintaining project schedules and documentation. Excellent written, verbal, and presentation skills. Effective in cross-functional team environments and vendor/customer interactions. Intermediate to advanced proficiency in Microsoft Office Suite (Excel, Word, PowerPoint, Outlook). Strong analytical and troubleshooting skills with the ability to work independently or collaboratively What Linamar Has to Offer Competitive Compensation Employee Benefits package includes but not limited to, Drug, Dental & Vision etc. 401k Program Opportunities for career advancement. Sustainability Counsel Community based outreach supporting both local and global initiatives and charities. Discounts for local vendors and events, including auto supplier discounts. About Us Linamar Corporation is a Canadian-founded global manufacturer, renowned for its advanced engineering and innovative product development across diverse industries and markets. Our journey started in 1966 under the visionary leadership of our founder, and today, we remain committed to cultivating a culture of innovation and collaboration. With access to state-of-the-art tools and resources, you'll have the opportunity to make a meaningful impact alongside a team of driven and passionate professionals. Join us and be part of a company where innovation, collaboration, and growth are at the heart of everything we do. Linamar Corporation is an equal opportunity employer and encourages diversity in the workplace without regard to any basis protected by applicable federal, state, or local law. Linamar Corporation encourages applications from all qualified individuals and will reasonably accommodate applicants throughout all stages of the recruitment and selection process upon request. INDHIND1

Collabera is ranked amongst the top 10 Information Technology (IT) staffing firms in the U.S., with more than $525 million in sales revenue and a global presence that represents approximately 12,000+ professionals across North America (U.S., Canada), Asia Pacific (India, Philippines, Singapore, Malaysia), and Europe (Ireland, Netherlands, Poland, United Kingdom). We support our clients with a strong recruitment model and a sincere commitment to their success, which is why more than 75% of our clients rank us amongst their top three staffing suppliers. Not only are we committed to meeting and exceeding our customer's needs, but also are committed to our employees' satisfaction as well. We believe our employees are the cornerstone of our success and we make every effort to ensure their satisfaction throughout their tenure with Collabera. As a result of these efforts, we have been recognized by Staffing Industry Analysts (SIA) as the “Best Staffing Firm to Work For” for five consecutive years since 2012. Collabera has over 50 offices across the globe with a presence in ten countries and provides staff augmentation, managed services and direct placement services to global 2000 corporations. For consultants and employees, Collabera offers an enriching experience that promotes career growth and lifelong learning. Visit ***************** to learn more about our latest job openings. Awards and Recognition --Staffing Industry Analysts: Best Staffing Firm to Work For (2016, 2015, 2014, 2013, 2012) --Staffing Industry Analysts: Largest U.S. Staffing Firms (2016, 2015, 2014, 2013) --Staffing Industry Analysts: Largest Minority Owned IT Staffing Firm in the US. Job Description Responsibilities: A Fortune 500 manufacturing and aerospace giant looking for Product Manufacturing Engineer who will be responsible for the producibility, capability, efficiency of each product and process in the facility. The Senior Product Manufacturing Engineer will use Six Sigma tools to improve processes to reduce part cost and Cost of Poor Quality. Qualifications · Minimum Bachelor in Mechanical Engineering, Industrial Engineering, or similar discipline with 3-5 years of relevant experience · 3-5 years Manufacturing Engineering Experience · Process Control experience desirable. · Six Sigma Black Belt preferred Additional Information If you want to know more and apply, please connect with: Niraj Singh **************************** ************ ***********************************************

Electronics Engineer (6-Month Contract) Employment Type: Contract (6 months) Experience Level: Mid to Senior LevelWork Arrangement: Hybrid (on-site 3-4 days per week; some weeks may require full-time on-site presence) We are seeking an experienced Electronics Engineer for a 6-month contract position to support a critical electronics manufacturing project. The ideal candidate will have strong expertise in printed circuit board assembly (PCBA), design for manufacturing (DEMF), and testing, with the ability to work collaboratively with suppliers and cross-functional teams to ensure successful product integration. What it's like to work here:Make a positive difference! It's why we exist. We are always looking for teammates who are eager to use their diverse set of talents with our customers, coworkers, and communities. We want to leave this world better than we found it.What you will get to do: Electronics Manufacturing Management: Oversee the manufacturing of 4 printed circuit boards (PCBs), wiring harnesses, connectors, and integration with internal battery power systems Supplier Collaboration: Travel to supplier location in Jasper, Indiana (1038 E. 15th St., Jasper, IN 47546) approximately 3-5 times during the 6-month project duration to provide technical support and oversight Process Development & Validation: Document all process development activities and validations required for full integration of designed components Verification & Validation (V&V): Bridge design components into V&V activities, including process development, process validation, and production documentation Technical Documentation: Create comprehensive documentation to support manufacturing processes, quality standards, and regulatory requirements What will make you successful: Proven experience with PCBA (Printed Circuit Board Assembly) processes Strong background in DEMF (Design for Manufacturing) principles Hands-on testing and validation experience Proficiency with the following software tools: 1PLM (Product Lifecycle Management) SLMS (System Lifecycle Management Software) Valgenesis (validation software) E-CAD (Electronic Computer-Aided Design) Microsoft Office Suite DISHER is a nationally recognized engineering, manufacturing technology, and technical recruiting firm based in Zeeland, Michigan. Our diverse team of top talent comes alongside clients within multiple industries to solve their unique challenges. DISHER truly is a great place to work. Our mission? To Make a Positive Difference with our customers, coworkers, and communities. Every day we strive to leave this world better than we found it. It is what motivates our caring team and unifies our culture.