Quality Assurance Inspector jobs at Sysco - 2487 jobs

Applied Technical Services, LLC ("ATS" or the "Company") is a leading provider of critical testing, inspection, certification, and compliance services. The Company serves clients across a diverse set of large and stable end markets including manufacturing, power generation, aerospace, medical, and defense. ATS was founded in 1967 and is headquartered in Marietta, GA. Today the Company employs nearly 2,100 team members in over 95 locations across the United States. Intermountain Testing Company, part of the ATS Family of Companies, has been in operation in the Colorado region since 1960. Their years of experience in inspection provide the highest level of expertise in the following methodologies: Certification of Welders/Welding Procedures, Visual Examination, Structural Steel Inspection, Ultrasonics, Radiography, Magnetic Particle, Liquid Penetrant, Eddy Current and other testing services and are an FAA Repair Station. Our purpose is to create a safe and reliable world and our mission is to deliver assurance through precise technical and professional services. Summary: ATS is seeking a Level II ET Inspector with NAS-410 and FAA experience to support our Englewood, CO ATS Family of Companies office. This is a permanent position. Typical hourly pay range starts at $40/hr and up to $60/hr based on certs and experience. Additional MT/PT and/or UTT certs per NAS-410 are a plus. Relo assistance and potential sign-on bonus available, BOE and Certs. Application deadline is March 31st, 2026, or sooner if position is filled. Responsibilities/Duties: FAA ET Inspector Perform examinations of materials in accordance with procedures, codes, standards, and specifications. Be thoroughly familiar with the scope and limitations of the methods for which qualified and exercise assigned responsibility for OJT and guidance of trainees Interface with department managers and clients to determine scope of work and work priorities in order to meet customer expectations. Be able to prepare written instructions and to organize and report the results of examinations. Work independently and support team members Perform other job related tasks as needed and assigned by supervisors.

Senior Inspector Alpha Corporation established in 1979, is a full-service woman-owned firm, providing civil, structural engineering, program and construction management, project controls, and technology services for various building types, transportation, and heavy infrastructure projects. We provide services to a broad spectrum of clients, including all levels of government agencies, public and private enterprises/partnerships. Alpha Corporations vision is to be recognized by clients for responsive, innovative, and quality services in the building, transportation, and infrastructure sectors, and to be the employer of choice for professionals seeking stimulating and rewarding careers. We are currently hiring a Senior Inspector for the Richmond. Responsibilities: The Senior Inspector will be responsible for ensuring contractors' compliance through reviewing interpreting and enforcing plans and contract documents for efficient and timely inspection of the contractors work, and shall: Independently plan, coordinate, inspect, and oversee project inspection activities of roadway, structure, and bridge, maintenance projects. Monitor contractors and schedules to ensure quality control and contract compliance of moderate to complex construction projects and advise contractors of violations and recommend adjustments to operations. Apply knowledge and experience toward the inspection of roadways and bridges using VDOT standards, specifications, and procedures. Apply engineering principles in the inspection and documentation of construction activities and make field measurements of pay items. Recommend changes to construction plans to meet field conditions or provide cost savings. Review and monitor EEO/DBE documentation and compliance with contract documents. Oversee, direct, and review the work of Inspectors and Inspector Trainees Maintain comprehensive project records and documentation using the VDOT Materials Book & project management software which could include VDOT Site Manager/AWP/Etc. Complete testing of materials using VDOT testing procedures Apply Best Management Practices to environmental inspection activities using DEQ standards and specifications. Apply Best Management Practices to safety activities. Communicate with various stakeholders including Localities and VDOT Assist with the development of change orders, investigations, and the analysis of Notices of Intent to File Claims and perform work order analysis. Qualifications: The Senior Inspector qualifications for this role include: 7 years of experience in roadway or bridge construction inspection Must be current with the following certifications or the ability to obtain: ACI Hydraulic Cement Concrete Field - ACI Soils and Aggregate - VDOT ESC Inspector - DEQ SWM Inspector - DEQ Pavement Marking - VDOT Intermediate Work Zone - VDOT Flagger - VDOT Guardrail Installation (GRIT) - VDOT Asphalt Field Levels I and II - VDOT Slurry Surfacing - VDOT Surface Treatment - VDOT 10-hour OSHA Safety High school diploma or GED Experience operating computer equipment, software programs including Microsoft Office Suite, and field-testing equipment. Must be able and willing to workday and night shifts. Must have a valid drivers license and an acceptable driving record. Able to pass a criminal background check. Alpha Corporation offers excellent career opportunities for continued professional, educational, and personal growth. We strive to offer our employees the opportunity to work on diverse and exciting projects in a team-spirit environment. All positions include a competitive benefits package and a positive outlook for a stable and rewarding career. Alpha Corporation is an equal-opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.

We are seeking a Quality Assurance Inspector at our manufacturing facility in Seattle, WA. This role will require you to accurately evaluate and document receiving, in-process and final inspection of highly intricate prototype, custom parts and assemblies for a variety of applications from Aerospace, military, Energy Production and R&D. You will need to have an extreme attention to detail, skill in basic shop mathematics, the ability to read and interpret blueprints and specifications and personal discipline to document and report nonconforming products in an objective manner. Responsibilities: Enact inspection activities to obtain objective evidence of compliance for CNC manufactured parts, assemblies, complex tooling, and other components. Interpret and measure features containing Geometric Dimensioning and Tolerancing (GD&T). Use manual inspection tooling such as micrometers, calipers, height gauges and surface plate activities to obtain compliance evidence for requirements up to the fourth decimal place (tenths) of accuracy. Create and review compliance documentation related to Receiving, In-process and Final inspection on Materials, Processes and Completed Products. Ensure conformance with customer Drawing, Specification and Purchase Order. Assist engineering department in implementing strategies to improve accuracy. Qualifications: Have recent 3-5 years (min) working experience within a machine shop atmosphere. Have a reasonable understanding of math, including trigonometry and geometry. Have a strong understanding of GD&T per ASME Y14.5. Be skilled in the use of all measurement equipment and machinery within a manufacturing environment. Strong skills in blueprint and part drawing interpretation for high tolerance, precision parts are mandatory. Bring ideas to the table to increase speed and efficiency in the department. Skills: Experience using DCC controls on a CMM. Experience in PC-DMIS, utilizing both solid models and touch point programing to perform inspection activities. Functional use of SolidWorks or a similar CAD system. Familiarity with complex dimensional reporting mechanisms, such as AS9102. Manipulation of outputs to multiple formats such as linear graphical representation, point cloud comparison, and polar graphics. Familiarity with Digital Product Definition (DPD) requirements per D6-51991 desired. If you feel this is the time to join an expanding company where you can be effective and be noticed for the positive influence you bring, submit your resume online. Diversity and equity are important values for us, and we encourage all qualified applicants to apply, regardless of race, gender, religion, sexual orientation, or disability. Position is subject to export control regulations as defined in 22 CFR 120.62

Purpose Accountable for basic operation of the site's quality assurance and control program including but not limited to: assisting and supporting all safety, environmental and quality regulations, product testing and adherence to standards, targets and recipes, maintain relevant equipment and calibrations, and decision-making through basic statistical understanding. Key Responsibilities Perform all work in accordance with safety rules and regulations and participate in facility health & safety activities as assigned Use descriptive statistics to identify non-conforming material to site referenced standards and targets Ensure all relevant quality requirements are consistently met according to the QA manual and plant SOPs Ensure that non-conforming product is appropriately quarantined, identified and segregated according to standard procedures Ensure the communication of non-conformance is clear and concise to required parties. Disposition basic non-conforming product as allowed by site Technical Manager. Record testing and inspection results by inputting into appropriate database or spreadsheets while identifying and responding to test results outside of product standards and targets Verify that all product packaging and appearance standards meet site and client expectations. Generate and analyze reports and charts Monitor and document process parameter changes as assigned Communicate test results and observations to operations and management to maintain process and product conformance Monitor and record consumption and inventory of raw materials (wax, resin, etc.). Verify quality of raw materials as required Support preventive and unscheduled maintenance tasks. Assist in process and product tests/trials. Be pro-active in identifying and performing other tasks to maintain and improve safety, quality and environmental performance Demonstrate adherence to process and product SOPs, JSAs, check sheets and other QMS documentation Provide support to team members when a quality issue arises Demonstrate drive and willingness to advance to higher levels of responsibility Perform in a relief capacity for production coordinator Perform other duties as assigned Models company core values Other duties as assigned Required Qualifications Associate's Degree and two years of experience in laboratory work, quality control, or general manufacturing; or an equivalent combination of training, education, and experience Knowledge of and ability to follow all quality and process standards Demonstrated ability to operate a computer and supporting software, to include spreadsheet and statistical packages Working knowledge of manufacturing equipment and production processes Demonstrated ability to operate sample preparation and testing equipment Knowledge of inventory management Excellent verbal and written communication as well as interpersonal skills Proficient math skills and statistical knowledge, including concepts Demonstrated ability to operate a variety of material handling equipment (both hand tools and electrical/motorized equipment) Ability to climb stairs and lift up to 50 pounds Demonstrated ability to work while wearing a respirator and/or other safety clothing or equipment Preferred Qualifications Associate degree in Forest Products, Engineering, Wood Science or related scientific field preferred Three (3) years composite or engineered wood manufacturing experience About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

Purpose Accountable for basic operation of the site's quality assurance and control program including but not limited to: assisting and supporting all safety, environmental and quality regulations, product testing and adherence to standards, targets and recipes, maintain relevant equipment and calibrations, and decision-making through basic statistical understanding. Key Responsibilities Perform all work in accordance with safety rules and regulations and participate in facility health & safety activities as assigned Use descriptive statistics to identify non-conforming material to site referenced standards and targets Ensure all relevant quality requirements are consistently met according to the QA manual and plant SOPs Ensure that non-conforming product is appropriately quarantined, identified and segregated according to standard procedures Ensure the communication of non-conformance is clear and concise to required parties. Disposition basic non-conforming product as allowed by site Technical Manager. Record testing and inspection results by inputting into appropriate database or spreadsheets while identifying and responding to test results outside of product standards and targets Verify that all product packaging and appearance standards meet site and client expectations. Generate and analyze reports and charts Monitor and document process parameter changes as assigned Communicate test results and observations to operations and management to maintain process and product conformance Monitor and record consumption and inventory of raw materials (wax, resin, etc.). Verify quality of raw materials as required Support preventive and unscheduled maintenance tasks. Assist in process and product tests/trials. Be pro-active in identifying and performing other tasks to maintain and improve safety, quality and environmental performance Demonstrate adherence to process and product SOPs, JSAs, check sheets and other QMS documentation Provide support to team members when a quality issue arises Demonstrate drive and willingness to advance to higher levels of responsibility Perform in a relief capacity for production coordinator Perform other duties as assigned Models company core values Other duties as assigned Required Qualifications Associate's Degree and two years of experience in laboratory work, quality control, or general manufacturing; or an equivalent combination of training, education, and experience Knowledge of and ability to follow all quality and process standards Demonstrated ability to operate a computer and supporting software, to include spreadsheet and statistical packages Working knowledge of manufacturing equipment and production processes Demonstrated ability to operate sample preparation and testing equipment Knowledge of inventory management Excellent verbal and written communication as well as interpersonal skills Proficient math skills and statistical knowledge, including concepts Demonstrated ability to operate a variety of material handling equipment (both hand tools and electrical/motorized equipment) Ability to climb stairs and lift up to 50 pounds Demonstrated ability to work while wearing a respirator and/or other safety clothing or equipment Preferred Qualifications Associate degree in Forest Products, Engineering, Wood Science or related scientific field preferred Three (3) years plywood, composite, or engineered wood manufacturing experience About Roseburg Forest Products Founded in 1936, Roseburg Forest Products is a privately held company based in Springfield, Oregon. With a legacy in sustainable forestry and innovative wood products manufacturing, we are a leading North American producer of engineered wood, exterior trim, plywood, lumber, and medium density fiberboard (MDF). Our products shape and support homes, workplaces, and industries, while our timberlands protect forest health for future generations and provide high-quality wood fiber for our integrated operations. At Roseburg, we believe in making lives better from the ground up through the products we create, the relationships we build, and the communities we support. Our team of passionate professionals value safety, integrity, and excellence in all we do. From the mill to the forest to the office, you'll find opportunities to grow and contribute to a company that cares for people, communities, and the environment. Learn more about who we are and what we do at ***************** Benefits at Roseburg Roseburg offers a comprehensive and competitive benefits package to support the health, financial security, and well-being of our team members and their families. Key benefits include: Bonus opportunities based on company and individual performance 401(k) with up to 4% company match and 3% automatic company contribution Vacation starting at 3 weeks and 11 paid holidays per year Company-sponsored medical, dental, and vision insurance Company-paid life, AD&D, and long-term disability insurance options Mental health benefits for the entire family, including 8 free annual sessions per person Wellness programs and incentives, including biometric screenings & wellness challenges Paid time away from work for illness or injury, as well as paid parental bonding time Health Savings Account (HSA) with company contributions and Flexible Spending Account (FSA) options Company match for charitable contributions Education assistance and professional development support Financial and retirement counseling Additional voluntary benefits including pet insurance, student loan refinancing, and exclusive scholarships for child dependents, and more! AN EQUAL OPPORTUNITY EMPLOYER INCLUDING DISABILITY AND VETERANS

CF Industries has many exciting and challenging opportunities at its world class production facility in Yazoo City Mississippi. The employee in this position will be responsible for the analysis of a wide range of samples submitted by the Yazoo City Complex to ensure they meet quality specifications. These include in process samples, raw products, and finished products. The employee will also perform routine analysis on environmental samples, quality control and calibration of laboratory instrumentation, and data entry. JOB RESPONSIBILITIES: Receive and log samples into LIMS system Perform Analytical Chemistry testing as required Prepare Reports of Analytical Chemistry Results Check, Calibrate, and Maintain Laboratory Equipment SUCCESSFUL INCUMBENTS WILL HAVE: Bachelor's degree in chemistry from an A.C.S. accredited chemistry program is preferred. Bachelor's Degree in other physical science disciplines will be considered if strong evidence of laboratory analytical chemistry skill is demonstrated Minimum of 1 year of Analytical Chemistry laboratory experience preferred Experience with ICP, UV-VIS, GC, IC, and FT-IR, is valuable Excellent written and verbal communication skills required. Both informal and formal data reporting and use of IT will tools be required Presentation skills sufficient to communicate thoughts succinctly to Lab Supervisor and Operations managers Proficient with Microsoft Office tools including Outlook, Word, Excel and PowerPoint Excellent time management skills and be comfortable working in an environment where priorities change rapidly Applicants considered for this position will be required to perform analytical skills or techniques to demonstrate proficiency (Examples: Spectroscopy, Chromatography, Qualitative Analysis etc.) POSITION SCOPE/CONTRIBUTION: The Chemist in this position will work closely with one or more quality control technicians and will be responsible for analysis of a wide range of samples submitted by the Yazoo City Complex. Certain samples will need to be collected by the lab. Samples are analyzed to ensure they meet quality specifications as set by the company and our customers. Employees working in this lab must be fully committed to CF's Environmental, Health, Safety, Security, and Quality objectives. This position requires 12 hour rotating shifts, mandatory overtime, and weekends.

Who We Are: Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. About the role: The Quality Control Inspector is responsible for inspecting sheet metal parts, welded assemblies, and finished products to ensure compliance with engineering drawings, welding standards, and customer requirements. This role supports the manufacturing team by identifying nonconformities, ensuring corrective actions, and maintaining product quality throughout fabrication and welding processes. Key responsibilities: Perform dimensional inspections of sheet metal components using calipers, micrometers, height gauges, and other precision measurement tools. Conduct visual and dimensional weld inspections per AWS D1.1, ISO, or equivalent welding standards. Verify weld quality, including size, length, penetration, porosity, cracks, undercut, and overall workmanship. Review and interpret engineering drawings, specifications, and weld symbols to ensure product conformity. Perform in-process inspections during sheet metal fabrication (cutting, bending, stamping, drilling, assembly, etc.). Inspect surface finishes, powder coating/painting, and other secondary processes Document inspection results, prepare quality reports, and maintain records. Support root cause analysis and corrective/preventive actions (CAPA) Collaborate with production and engineering teams to resolve quality issues. Ensure inspection tools and gauges are calibrated and properly maintained. Follow all company safety, ISO 9001, and quality system procedures. Minium Qualifications: High school diploma or technical certification required, associate degree in a technical field preferred. 2+ years of experience in quality inspection within a sheet metal fabrication or welding environment. Experience with precision measurement tools (calipers, micrometers, height gauges, CMM experience a plus). Strong attention to detail and ability to work independently. Good communication and documentation skills. Preferred Qualifications: Strong knowledge of welding processes (MIG, TIG, spot welding) and common weld defects. Ability to read and interpret engineering drawings, GD&T, and weld symbols. Familiarity with AWS D1.1 or similar welding standards; welding inspection certification (CWI, WI) preferred. Understanding of ISO 9001 quality systems; IATF knowledge a plus. Benefit at Delta Electronics Americas: Life at Delta EEO Statement: Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic. The base salary range for this full-time position is 45k-55k per year. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company‑sponsored programs; parental leave is provided in accordance with applicable law. About the role: The Quality Control Inspector is responsible for inspecting sheet metal parts, welded assemblies, and finished products to ensure compliance with engineering drawings, welding standards, and customer requirements. This role supports the manufacturing team by identifying nonconformities, ensuring corrective actions, and maintaining product quality throughout fabrication and welding processes. Key responsibilities: Perform dimensional inspections of sheet metal components using calipers, micrometers, height gauges, and other precision measurement tools. Conduct visual and dimensional weld inspections per AWS D1.1, ISO, or equivalent welding standards. Verify weld quality, including size, length, penetration, porosity, cracks, undercut, and overall workmanship. Review and interpret engineering drawings, specifications, and weld symbols to ensure product conformity. Perform in-process inspections during sheet metal fabrication (cutting, bending, stamping, drilling, assembly, etc.). Inspect surface finishes, powder coating/painting, and other secondary processes Document inspection results, prepare quality reports, and maintain records. Support root cause analysis and corrective/preventive actions (CAPA) Collaborate with production and engineering teams to resolve quality issues. Ensure inspection tools and gauges are calibrated and properly maintained. Follow all company safety, ISO 9001, and quality system procedures. Minium Qualifications: High school diploma or technical certification required, associate degree in a technical field preferred. 2+ years of experience in quality inspection within a sheet metal fabrication or welding environment. Experience with precision measurement tools (calipers, micrometers, height gauges, CMM experience a plus). Strong attention to detail and ability to work independently. Good communication and documentation skills. Preferred Qualifications: Strong knowledge of welding processes (MIG, TIG, spot welding) and common weld defects. Ability to read and interpret engineering drawings, GD&T, and weld symbols. Familiarity with AWS D1.1 or similar welding standards; welding inspection certification (CWI, WI) preferred. Understanding of ISO 9001 quality systems; IATF knowledge a plus. Benefit at Delta Electronics Americas: Life at Delta EEO Statement: Delta Electronics Americas is an Equal Opportunity Employer and is committed to compliance with all applicable federal, state, and local laws. Delta Electronics America is committed to fostering a diverse, inclusive, and respectful workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, age, marital status, national origin, disability, veteran status, or any other protected characteristic. The base salary range for this full-time position is 45k-55k per year. Actual pay will depend on factors such as location, skills, experience, market conditions, and business needs. This role may also be eligible for incentive pay, subject to the terms of the applicable plan. Eligible employees receive company-provided benefits in accordance with plan terms and eligibility requirements. Benefits include health coverage, wellness resources, retirement savings plan, paid time off, and other company‑sponsored programs; parental leave is provided in accordance with applicable law.

CF Industries has many exciting and challenging opportunities at its world class production facility in Yazoo City Mississippi. The employee in this position will be responsible for the analysis of a wide range of samples submitted by the Yazoo City Complex to ensure they meet quality specifications. These include in process samples, raw products, and finished products. The employee will also perform routine analysis on environmental samples, quality control and calibration of laboratory instrumentation, and data entry. JOB RESPONSIBILITIES: Receive and log samples into LIMS system Perform Analytical Chemistry testing as required Prepare Reports of Analytical Chemistry Results Check, Calibrate, and Maintain Laboratory Equipment SUCCESSFUL INCUMBENTS WILL HAVE: Bachelor's degree in chemistry from an A.C.S. accredited chemistry program is preferred. Bachelor's Degree in other physical science disciplines will be considered if strong evidence of laboratory analytical chemistry skill is demonstrated Minimum of 1 year of Analytical Chemistry laboratory experience preferred Experience with ICP, UV-VIS, GC, IC, and FT-IR, is valuable Excellent written and verbal communication skills required. Both informal and formal data reporting and use of IT will tools be required Presentation skills sufficient to communicate thoughts succinctly to Lab Supervisor and Operations managers Proficient with Microsoft Office tools including Outlook, Word, Excel and PowerPoint Excellent time management skills and be comfortable working in an environment where priorities change rapidly Applicants considered for this position will be required to perform analytical skills or techniques to demonstrate proficiency (Examples: Spectroscopy, Chromatography, Qualitative Analysis etc.) POSITION SCOPE/CONTRIBUTION: The Chemist in this position will work closely with one or more quality control technicians and will be responsible for analysis of a wide range of samples submitted by the Yazoo City Complex. Certain samples will need to be collected by the lab. Samples are analyzed to ensure they meet quality specifications as set by the company and our customers. Employees working in this lab must be fully committed to CF's Environmental, Health, Safety, Security, and Quality objectives. This position requires 12 hour rotating shifts, mandatory overtime, and weekends.

CF Industries has many exciting and challenging opportunities at its world class production facility in Yazoo City Mississippi. The employee in this position will be responsible for the analysis of a wide range of samples submitted by the Yazoo City Complex to ensure they meet quality specifications. These include in process samples, raw products, and finished products. The employee will also perform routine analysis on environmental samples, quality control and calibration of laboratory instrumentation, and data entry. JOB RESPONSIBILITIES: Receive and log samples into LIMS system Perform Analytical Chemistry testing as required Prepare Reports of Analytical Chemistry Results Check, Calibrate, and Maintain Laboratory Equipment SUCCESSFUL INCUMBENTS WILL HAVE: Bachelor's degree in chemistry from an A.C.S. accredited chemistry program is preferred. Bachelor's Degree in other physical science disciplines will be considered if strong evidence of laboratory analytical chemistry skill is demonstrated Minimum of 1 year of Analytical Chemistry laboratory experience preferred Experience with ICP, UV-VIS, GC, IC, and FT-IR, is valuable Excellent written and verbal communication skills required. Both informal and formal data reporting and use of IT will tools be required Presentation skills sufficient to communicate thoughts succinctly to Lab Supervisor and Operations managers Proficient with Microsoft Office tools including Outlook, Word, Excel and PowerPoint Excellent time management skills and be comfortable working in an environment where priorities change rapidly Applicants considered for this position will be required to perform analytical skills or techniques to demonstrate proficiency (Examples: Spectroscopy, Chromatography, Qualitative Analysis etc.) POSITION SCOPE/CONTRIBUTION: The Chemist in this position will work closely with one or more quality control technicians and will be responsible for analysis of a wide range of samples submitted by the Yazoo City Complex. Certain samples will need to be collected by the lab. Samples are analyzed to ensure they meet quality specifications as set by the company and our customers. Employees working in this lab must be fully committed to CF's Environmental, Health, Safety, Security, and Quality objectives. This position requires 12 hour rotating shifts, mandatory overtime, and weekends.

CF Industries has many exciting and challenging opportunities at its world class production facility in Yazoo City Mississippi. The employee in this position will be responsible for the analysis of a wide range of samples submitted by the Yazoo City Complex to ensure they meet quality specifications. These include in process samples, raw products, and finished products. The employee will also perform routine analysis on environmental samples, quality control and calibration of laboratory instrumentation, and data entry. JOB RESPONSIBILITIES: Receive and log samples into LIMS system Perform Analytical Chemistry testing as required Prepare Reports of Analytical Chemistry Results Check, Calibrate, and Maintain Laboratory Equipment SUCCESSFUL INCUMBENTS WILL HAVE: Bachelor's degree in chemistry from an A.C.S. accredited chemistry program is preferred. Bachelor's Degree in other physical science disciplines will be considered if strong evidence of laboratory analytical chemistry skill is demonstrated Minimum of 1 year of Analytical Chemistry laboratory experience preferred Experience with ICP, UV-VIS, GC, IC, and FT-IR, is valuable Excellent written and verbal communication skills required. Both informal and formal data reporting and use of IT will tools be required Presentation skills sufficient to communicate thoughts succinctly to Lab Supervisor and Operations managers Proficient with Microsoft Office tools including Outlook, Word, Excel and PowerPoint Excellent time management skills and be comfortable working in an environment where priorities change rapidly Applicants considered for this position will be required to perform analytical skills or techniques to demonstrate proficiency (Examples: Spectroscopy, Chromatography, Qualitative Analysis etc.) POSITION SCOPE/CONTRIBUTION: The Chemist in this position will work closely with one or more quality control technicians and will be responsible for analysis of a wide range of samples submitted by the Yazoo City Complex. Certain samples will need to be collected by the lab. Samples are analyzed to ensure they meet quality specifications as set by the company and our customers. Employees working in this lab must be fully committed to CF's Environmental, Health, Safety, Security, and Quality objectives. This position requires 12 hour rotating shifts, mandatory overtime, and weekends.

CF Industries has many exciting and challenging opportunities at its world class production facility in Yazoo City Mississippi. The employee in this position will be responsible for the analysis of a wide range of samples submitted by the Yazoo City Complex to ensure they meet quality specifications. These include in process samples, raw products, and finished products. The employee will also perform routine analysis on environmental samples, quality control and calibration of laboratory instrumentation, and data entry. JOB RESPONSIBILITIES: Receive and log samples into LIMS system Perform Analytical Chemistry testing as required Prepare Reports of Analytical Chemistry Results Check, Calibrate, and Maintain Laboratory Equipment SUCCESSFUL INCUMBENTS WILL HAVE: Bachelor's degree in chemistry from an A.C.S. accredited chemistry program is preferred. Bachelor's Degree in other physical science disciplines will be considered if strong evidence of laboratory analytical chemistry skill is demonstrated Minimum of 1 year of Analytical Chemistry laboratory experience preferred Experience with ICP, UV-VIS, GC, IC, and FT-IR, is valuable Excellent written and verbal communication skills required. Both informal and formal data reporting and use of IT will tools be required Presentation skills sufficient to communicate thoughts succinctly to Lab Supervisor and Operations managers Proficient with Microsoft Office tools including Outlook, Word, Excel and PowerPoint Excellent time management skills and be comfortable working in an environment where priorities change rapidly Applicants considered for this position will be required to perform analytical skills or techniques to demonstrate proficiency (Examples: Spectroscopy, Chromatography, Qualitative Analysis etc.) POSITION SCOPE/CONTRIBUTION: The Chemist in this position will work closely with one or more quality control technicians and will be responsible for analysis of a wide range of samples submitted by the Yazoo City Complex. Certain samples will need to be collected by the lab. Samples are analyzed to ensure they meet quality specifications as set by the company and our customers. Employees working in this lab must be fully committed to CF's Environmental, Health, Safety, Security, and Quality objectives. This position requires 12 hour rotating shifts, mandatory overtime, and weekends.

CF Industries has many exciting and challenging opportunities at its world class production facility in Yazoo City Mississippi. The employee in this position will be responsible for the analysis of a wide range of samples submitted by the Yazoo City Complex to ensure they meet quality specifications. These include in process samples, raw products, and finished products. The employee will also perform routine analysis on environmental samples, quality control and calibration of laboratory instrumentation, and data entry. JOB RESPONSIBILITIES: Receive and log samples into LIMS system Perform Analytical Chemistry testing as required Prepare Reports of Analytical Chemistry Results Check, Calibrate, and Maintain Laboratory Equipment SUCCESSFUL INCUMBENTS WILL HAVE: Bachelor's degree in chemistry from an A.C.S. accredited chemistry program is preferred. Bachelor's Degree in other physical science disciplines will be considered if strong evidence of laboratory analytical chemistry skill is demonstrated Minimum of 1 year of Analytical Chemistry laboratory experience preferred Experience with ICP, UV-VIS, GC, IC, and FT-IR, is valuable Excellent written and verbal communication skills required. Both informal and formal data reporting and use of IT will tools be required Presentation skills sufficient to communicate thoughts succinctly to Lab Supervisor and Operations managers Proficient with Microsoft Office tools including Outlook, Word, Excel and PowerPoint Excellent time management skills and be comfortable working in an environment where priorities change rapidly Applicants considered for this position will be required to perform analytical skills or techniques to demonstrate proficiency (Examples: Spectroscopy, Chromatography, Qualitative Analysis etc.) POSITION SCOPE/CONTRIBUTION: The Chemist in this position will work closely with one or more quality control technicians and will be responsible for analysis of a wide range of samples submitted by the Yazoo City Complex. Certain samples will need to be collected by the lab. Samples are analyzed to ensure they meet quality specifications as set by the company and our customers. Employees working in this lab must be fully committed to CF's Environmental, Health, Safety, Security, and Quality objectives. This position requires 12 hour rotating shifts, mandatory overtime, and weekends.

Job Title: Distribution Inspector 3Location: Rio Grande Valley Service Area/El Paso Service AreaKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Title: Distribution Inspector Level 3Location: El Paso, TXDuration: Long TermDescription:· Must be able to monitor work performed by contractors hired by Company on gas pipeline and service installations, replacements, and relocations within Company's service area. · Work shall be performed in accordance with Company standards and 49 CFR 192· Oversee transmission projects, ensuring the integrity, safety, and compliance of pipelines. Qualifications:· Minimum of 6 years of hands-on experience in pipeline inspection, with a specialized focus on poly fusion projects. · Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, TVC, and ONE MAP. · CPWI· API 1169· Identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. · Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Title: Distribution Inspector 3Location: Austin, TXKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping. Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards. Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities. Ensure all inspections meet or exceed industry regulations and standards. Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence. Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection. API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting. Strong communication skills with the ability to work effectively in a team environment. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

C & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Job Title: Distribution Inspector 3Location: Tulsa, OKKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping.Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards.Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities.Ensure all inspections meet or exceed industry regulations and standards.Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence.Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection.API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting.Strong communication skills with the ability to work effectively in a team environment. C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry.

Job DescriptionC & L Inspection was built on a mission to be the most trusted US Services Company delivering top-notch performance with uncompromising integrity. This way of thinking has set us above the competition. We are looking for knowledgeable, safety minded people to join our team as we grow. Job Title: Distribution Inspector 3Location: Tulsa, OKKey Responsibilities:Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping.Spearhead capital rebuild and relocation projects, overseeing every aspect from planning to execution, ensuring seamless operations and compliance with industry standards.Utilize techniques and technologies to identify and address leaks swiftly and efficiently, minimizing environmental impact and ensuring the safety of communities.Ensure all inspections meet or exceed industry regulations and standards.Foster strong relationships with clients and internal teams, delivering clear, concise, and actionable insights from inspections, fostering a culture of collaboration and excellence.Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:5-6 years of hands-on experience in pipeline inspection, with a focus on capital rebuilds, relocations, and leak detection.API 1169 CertificationProven expertise in overseeing large-scale projects, from start to finish. Exceptional problem-solving skills and attention to detail, with a focus on precision and accuracy in all aspects of inspection and reporting.Strong communication skills with the ability to work effectively in a team environment. C & L Inspection offers a full slate of Inspection, Construction Management and Engineering personnel to the Petroleum, Natural Gas and Telecom Industries. We surpass others in the industry by providing the newest technology, training and support that is unequaled. Working together with our inspectors and clients, our team strives to set a new bar for the Pipeline & Utilities Inspection industry. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Job Title: Natural Gas Distribution Inspector Level 2Location: South East, TXKey Responsibilities:Conduct comprehensive inspections of pipelines, focusing on line extensions and rebuild services, to guarantee compliance with industry standards and regulations.Distribution Inspector must have experience in the field of distribution construction activities that the Company is performing, including but not limited to proficiency in the following activities and programs: Main line installation, Service line installation, Tie-ins, Service and Mainline retirements, Leak Repair, Regulator Settings, Weld Mapping.Collaborate closely with engineering teams to develop effective inspection strategies and contribute to the planning of line extension projects and rebuild services.Provide technical expertise to support decision-making processes related to pipeline maintenance, repair, and replacement.Maintain up-to-date knowledge of industry standards, regulations, and best practices as well as knowledge of the following: PHMSA part 192 requirements, OSHA site safety, Maximo/Moblite, Locus IQ, Pragma CAD, as-built drawings, and ONE MAP. Qualifications:Minimum of 2-4 years of hands-on experience in pipeline inspection, with a focus on line extensions and rebuild services.In-depth knowledge of pipeline construction, maintenance, and repair processes, particularly related to line extensions and rebuild projects.Familiarity with industry-specific software and tools.Strong analytical skills and attention to detail, with the ability to identify and assess potential issues in pipelines.Excellent communication skills with the ability to work within a team. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Company: US0332 Sysco Western Minnesota, Inc. Sales Territory: Zip Code: 56304 Travel Percentage: Compensation Range: $0.00 - $0.00 The compensation range provided is in compliance with state specific laws. Factors that may be used to determine your actual rate of pay include your specific skills, years of experience and other factors. You may be eligible to participate in the Company's Incentive Plan. BENEFITS INFORMATION: For information on Sysco's Benefits, please visit ************************* JOB SUMMARY Monitor Food Safety & Quality Assurance (FSQA) support/evaluation programs and inspection/audit procedures to ensure compliance of products and processes to corporate and regulatory requirements at a Sysco Specialty Meat and/or Seafood Company. RESPONSIBILITIES Monitoring of FSQA programs including HACCP Program, sanitation standard operating procedures, pest control, good manufacturing practices, approved supplier program, foreign material control, plant sanitation, chemical control, product quality assurance, FSQA Customer complaints, food defense and security Assist in Employee Training of FSQA Programs, Policies, and Procedures Assist in Implementation of Independent FSQA Audit Program - SQF Audits Assist when necessary for product evaluations, plant visits, and supplier/customer communication to assist other staff members. Assist as needed in any manner capable of during emergencies the plant President or GM (general manager) determines are paramount to the business. Frequently interacts with the following: SSMC/SSSC Personnel, Operations, Sales, Transportation and Maintenance as well as Sysco Operating Companies, and supplier/customer personnel at the line level. QUALIFICATIONS Education Formal job training in TQM principles, SPC, HACCP concepts, CFIA/FDA regulations would be beneficial. Formal quality and sensory analysis training would be helpful. Experience One to 3 years of meat and/or seafood industry (as appropriate) experience at a federal CFIA/FDA meat and/or seafood processing plant (as appropriate). Raw meat or seafood industry the only experience will be accepted instead of combined experience Professional Skills Demonstrate the ability to write reports, basic business correspondence, as well as to effectively present information and respond to questions from managers. Demonstrate the ability to add, subtract, multiply, and divide into all units of measure, using whole numbers, common fractions, and decimals. Demonstrate the ability to define problems, collect data and establish facts. Demonstrate the ability to interpret basic technical instructions. Ability to use personal computer, lab equipment, food preparation equipment and office communication equipment. Certifications, Licenses and/or Registrations Valid driver's license. Physical Demands Regularly required to talk or hear. Frequently is required to use hands to finger, handle, or feel objects, tools, or controls. Occasionally required to stand; walk; sit; reach with hands and arms; stoop, kneel, crouch, or crawl; and taste or smell. Occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Plant audits and inspections may require lifting of products up to 100 pounds and inspection requires working in a production environment on a moving line, lifting cartons, and visual inspection. Corrected vision required for sensory analysis to identify color, clarity. Warehouse and plant audit also requires close and distance vision to judge GMPs; peripheral vision and depth perception mandatory for safety. Work Environment Frequently exposed to fumes or airborne particles. Occasionally works near mechanical parts and in high, precarious places and is occasionally exposed to wet and/or humid conditions, extreme cold, and risk of radiation. The noise level in the work environment is usually moderate and operating in a refrigerated environment is common. Plant audits/inspections and working at remote in-transit processing facilities and Sysco Operating Companies contain both moderate/loud noise and exposure to fumes and mechanical hazards. OVERVIEW: Sysco is the global leader in foodservice distribution. With over 71,000 colleagues and a fleet of over 13,000 vehicles, Sysco operates approximately 333 distribution facilities worldwide and serves more than 700,000 customer locations. We offer our colleagues the opportunity to grow personally and professionally, to contribute to the success of a dynamic organization, and to serve others in a manner that exceeds their expectations. We're looking for talented, hard-working individuals to join our team. Come grow with us and let us show you why Sysco is at the heart of food and service. AFFIRMATIVE ACTION STATEMENT: Applicants must be currently authorized to work in the United States. We are proud to be an Equal Opportunity and Affirmative Action employer, and consider qualified applicants without regard to race, color, creed, religion, ancestry, national origin, sex, sexual orientation, gender identity, age, disability, veteran status or any other protected factor under federal, state or local law. This opportunity is available through Sysco Corporation, its subsidiaries and affiliates.