Telecom technician jobs in Beaumont, TX - 149 jobs

Requirements Required Education and Experience: A minimum of a high school diploma/GED and/or one to three years mechanical and electrical, experience in a similar environment or equivalent in college or vocational education. Excellent people skills and verbal communication required. Knowledge of reading schematics and manuals. Knowledge of mechanical and electrical equipment. Skilled in providing excellent customer relations by exchanging information with courtesy and consideration. Ability to exhibit a professional demeanor, and develop customer relations and superior service. Ability to effectively communicate (written and verbal) with all levels of an organization internally and externally. Ability to read and interpret schematics and understand necessary service and training manuals. Ability to perform arithmetic calculations involving fractions, decimals, and percentages. Ability to understand and follow verbal and/or demonstrated instructions. Ability to maintain a good understanding of industry innovations and product availability in order to make recommendations based on customer needs. Ability to safely operate personal hand tools. Ability to draw upon available support resources from within the company and recognize when it is appropriate to do such. Such other knowledge, skills, and abilities as are necessary in connection with additionally assigned duties. Required Experience/Certifications: Gilbarco Dispenser Additional Eligibility Qualifications: Experience or Certification(s) in one or more of the following: Gasboy Fleet Verifone Fuel Master Gilbarco Passport Veeder Root Insurability requirement: Must possess a valid driver's license and maintain a good driving record. Work Authorization/Security Clearance: Security clearance may be required for this position. Work Environment: While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The employee is occasionally exposed to a variety of extreme conditions at construction job sites. The noise level in the work environment and job sites can be loud. The position regularly works near moving mechanical parts and in outside conditions that include inclement weather, heat and humidity, and exposure to dust and asphalt. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position is very active and requires standing, walking, bending, kneeling, stooping, crouching, crawling and climbing all day. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Personal Protective Equipment: Safety Glasses and hard hats required while performing certain tasks. Position Type/Expected Hours of Work: This is a full-time position, and hours of work and days are Monday through Friday, 8:00 a.m. to 5 p.m. Evening and weekend work may be required as job duties demand. Travel: Local travel is expected for this position. GFT is a Drug Free Workplace We offer fantastic benefits that include comprehensive coverage, 401K Match, Paid holidays and Paid vacation. To ensure every application receives equal attention, all recruiting is managed by our corporate team. Local branches are unable to provide initial application status updates. If your qualifications match our needs, our recruiting team will be happy to reach out to you directly.

Salary Description $24-38

Veolia is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management, Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world's most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description As a Field Service Representative, you'll be on the front lines providing operations and maintenance expertise on water treatment systems for one of our customers from one of a variety of industries. This mission critical role involves working on a variety of technologies including, media filtration, wastewater, softening, reverse osmosis (RO), ion exchange (IX), de-oxygenation, electro deionization, and ultrafiltration (UF). Key Characteristics * Conduct maintenance and calibration activities * Consult with customer management and operation teams * Excellent mechanical know how and problem-solving skills * Ensure contract compliance of volume and quality specifications * Operate, monitor, and optimize equipment performance Duties & Responsibilities * Carry out mechanical, electrical and controls troubleshooting on equipment such as valves, air compressors, ejectors, process pumps, blowers, and instrumentation * Create and maintain site paperwork, and provide customers with detailed technical summaries of work performed * Maintain inventory of spare parts and adequate supply of chemicals and replacement parts * Monitor and maintain chemical injection systems * Perform analytical testing such as: turbidity, hardness, chlorine, pH, CO2, O2, SDI, TOC, in addition to various other site-specific testing requirements * Enter and complete work orders in Maintenance Program (MaintainX) * Other duties as assigned Knowledge, Skills & Abilities Required * 2 years of experience in Industrial, oil field, refineries, chemical plants * Electrical, chemical, and/or mechanical experience * Basic computer skills (email, data entry, online training, EHS reporting) * Able to lift 50lbs Preferred Skill * Forklift Experience/Training Qualifications Education & Experience Required: * High School Diploma / GED / Home School Certification OR international equivalent 2+ years' experience of service/maintenance or equivalent in an industrial environment * Current TWIC Card is required * Current Driver's License Preferred: * Bachelor or Associates Degree in Science/Engineering (STEM) or technical certificate in Instrumentation, electrical, mechanical Additional Information Working Conditions * 5% travel (training/other site visits) * Hot, dirty, loud, moving equipment * Working with chemicals for water treatment As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

About HMT HMT is the global leader in aboveground storage tank solutions. HMT brings a distinct level of innovation and service to the tank industry through a unique approach of partnering with customers to optimize tank operations. Knowing that every customer's need is different, we use our decades of experience to customize solutions that help tank operations become more efficient, more productive, and more profitable. We are seeking a skilled NDT Level II Technician to perform RT, MT , and PT inspections in accordance with industry codes and customer requirements. This role involves data collection, maintaining safety standards, and ensuring positive client and team relationships. Essential Duties and Responsibilities Skills and knowledge to interpret NDT requirements, codes, and standards required by contract. Must be able to perform the following NDT Methods: Radiographic Testing (RT), Magnetic Particle (MT) Testing, and Penetrant (PT) Testing. Collect and process data created by the inspections, in accordance with the HMT and customer's procedures and requirements. Drive a vehicle safely in an oil and gas facility and field sites. Be proficient with standard computer software (such as MS Word and Excel). Maintain a positive relationship between client, facility and customer; and promote a positive attitude towards coworkers. Ensure that all HMT safety policies and procedures are being followed. Clean driving record Must pass DISA background and drug and alcohol screen Current Driver's License from state of residence TWIC Card Able to lift and carry a minimum of 75 lbs. Willingness to Travel up to 20%+ Required Qualifications & Education Must be able to pass HMT certification standards Additional certifications desired, but not required are: Certifications in DR and PMI are a plus. Passport is a plus. Proficient in Microsoft Office applications including Word and Excel. Self‐motivated with good written and verbal communication skills with a positive team‐oriented attitude is required. Trained in OSHA 10 and or OSHA 30 Respirator fit tested (current) Current CPR & First Aid HMT is an Equal Employment Opportunity Employer. We will not tolerate discrimination because of race, color, religion, sex, age, national origin, military or veteran status, mental or physical disability, genetic information, gender, gender identity or expression, sexual expression, or any other unlawful reason. All qualified applicants are encouraged to submit applications for employment. Employment with HMT is At-Will.

As a Field Service Technician PRV II, you will adhere to ValvKeep and Quality Standardization Procedures throughout the valve repair process. You will become proficient in identifying contaminated valves using Safety Data Sheets (SDS) and recognizing missing parts. You will learn to repair valves according to company standards and utilize BH Green Tag Channel Connect. Additionally, you will gain introductory knowledge of various shop equipment, including test stands and machining tools, and be prepared for manufacturer training. Responsibilities: All additional job responsibilities of a Field Service Technician - PRV I Locate, use, and comprehend manufacturer installation and operation manuals Perform inspection to identify necessary corrective action as authorized Perform PMI Assemble, test, and troubleshoot valves and other equipment per applicable codes and standards per manufacturer and customer requirements Install instrumentation/accessories as necessary Operate diagnostic equipment (i.e. EVT, AVK, Hydroset, etc.) Performing calibration of measurement equipment in accordance with internal quality procedures Measure and record critical dimensions per manufacturer specifications Support Field Service Technician - PRV I employees through mentoring and on-the-job (OJT) training May act in a leadership role for assigned area Positional Requirements & Qualifications: Education & Experience HS Education or GED Equivalent a plus 2 - 5 years of industry experience Skills & Abilities Meets all Pressure Relief Valve Technician I qualifications and requirements Successful completion of all applicable Quality Standardization Procedures Completed Green Tag Certification through Level II Completed inspection assessment Successful completion of Pressure Relief Valve Level II Written and Performance Tests Completed Pilot Valve Training Basic OSHA and TWIC card (TWIC, only if required) Demonstrate the ability to properly assemble and test valves/equipment of multiple pressure relief valve manufacturers Demonstrate proficient use of precision dimensional equipment (i.e. dial caliper, micrometer, etc.) Demonstrate ability to bend and fit tubing Complete certification training for use of Positive Material Identification (PMI) equipment Completion of diagnostic equipment training and/or certification Demonstrate proficiency in operating of test equipment (steam, air, liquid) Demonstrate proficiency in calibration of test gauges and/or transducers Complete certification of Certified Individual (CI) Effective oral & written communication skills Demonstrated “can do” attitude and excellent customer service skills Supervision: Minimal supervision required Must be able to travel and have a clear driving record in accordance to company driving guidelines Clear background check and drug/alcohol screening Essential Physical Functions: Lifting: up to 50 pounds Adjusting or moving objects up to 50 pounds in all directions Lift and carry: 50 pounds for 100 feet Bending, stooping, walking and climbing stairs Ascending or descending ladders, stairs, scaffolding, ramps Moving self in different positions to accomplish tasks in various environments including tight and confined spaces Remaining in a stationary position, often standing or sitting for prolonged periods Moving about to accomplish tasks or moving from one worksite to another Communicating with others to exchange information Repeating motions that may include the wrists, hands and/or fingers Operating machinery and/or power tools Operating motor vehicles or heavy equipment Assessing the accuracy, neatness and thoroughness of the work assigned Required physical ability if mandated by customer or regulatory requirements Able to hold body weight while swinging on rope during static and dynamic transfer (offshore)

The Customer Service Engineer - is an intermediate position that performs tasks related to the repair of a variety of technology-based products typically associated in an end-user computing environment. Responsibilities • Performs basic and moderately complex troubleshooting and repair activities, typically associated in an end-user environment, including but not limited to PC's, desktops, laptops, tablets and printers. • Provide support to client identified VIPs • Responds to change management requests including installing new PC equipment, providing end-user desk side support and other related activities. • Perform Install/Move/Add or Change (IMAC) activities. • Perform all assigned desk-side support activities • Display outstanding technical and professional services skills at all times • Meet - established customer service satisfaction levels and other operational/customer service metrics as outlined in established guidelines • Proactively communicate with the end-user and service desk personnel regarding arrival times, repair time estimates and status of the repair • Understands and follows all documented service operations policies and procedures. • Other duties or certifications may be assigned to meet business needs Education and Experience: • Typically requires technical school certification or equivalent of 2-4 years of relevant experience Certifications and/or Qualifications: • Maintain all required OEM Certifications as directed by Management • Knowledge of relevant software and hardware systems • Understanding of ITIL methodologies • A+ certification is desired • May require additional customer-specific certifications or training as required Skills: • Excellence in communication and customer-facing skills • Strong oral, written and interpersonal skills • Ability to follow instructions and processes with minimal instruction • Ability to lift and or move various computer equipment up to 50 lbs. • Must own a basic repair kit Additional requirements may exist if offer of employment is extended

* Perform repair receiving write-up process manually and electronically including: * Read, interpret, and respond accordingly to MSDS (Material Safety Data Sheet) information * Identify valves and accessories * Translate valve information from tag to write-up form and include any customer specific requests * Perform data entry in the electronic valve tracking system (GVT) including status updates and history searches * Take digital pictures and electronically transfer into the ERP system network folder * Safely pretest block valves and actuators per customer request for a failure analysis to be performed * Safely disassemble and clean valves and parts including various types of valves such as: * Lined plug valves * Lubricated plug valves * Lined butterfly valves * Various bolted bonnet gate, globe, and check valves * Soft-seated ball valves * Various pressure seal gate, globe, and check valves * Mark parts correctly and maintain organization and segregation * Perform glass bead and steel shot blasting while understanding what can and cannot be blasted * Perform chemical solvent cleaning * Use oxy/acetylene torch * Use bolt-torque equipment * Use high-pressure packing extractor * Broaden performance within the disassembly process including additional valve types such as: * Spring-loaded valves and atmospheric type valves such as Atwood Morrill * High performance metal-seated butterfly valves * Metal-seated ball valves * Wedgeplug valves and other equivalent brands * DuPont CL2 bullet valves * API 6D pipeline valves (WKM PowRSeal, WKM ball valves, Grove ball valves, etc.) * Manual and automated bellowseal globe valves * Coker isolation valves * Electric, bevel gear, pneumatic and hydraulic linear, and scotch yoke quarter turn actuators. * Evaluate parts and maintain material awareness * Maintain and apply Code knowledge such as ASME B16.5, B16.10 and B16.34 as well as API 598, 600, and 621 * Broaden knowledge and application of Code to include applicable Chlorine Institute Pamphlets, HF acid applicable material and handling specifications, API 6D and 6DR as well as NACE MR0175 or MR0103 as applicable * Safely and accurately perform some machining processes: * Polish stems using the lathe * Use drill press or pneumatic tools for disking seats * Safely assemble valves from repair order instructions, customer test-report/specification sheets, GCLA procedures, QSM/QCP manuals, and OEM IOM manuals; this includes performing the lapping process as applicable. * Valve types include: * Lined plug valve * Lubricated plug valves * Lined butterfly valves * Various bolted bonnet gate, globe, and check valves * Soft-seated ball valves * Various pressure seal gate, globe, and check valves * Install stem packing * Broaden performance within the assembly process including: * Assembly of the following: * Spring-loaded valves and atmospheric type valves such as Atwood Morrill * High performance metal-seated butterfly valves * Metal-seated ball valves * Wedgeplug valves and other equivalent brands * DuPont CL2 bullet valves * API 6D pipeline valves (WKM PowRSeal, WKM ball valves, Grove ball valves, etc.) * Manual and automated bellowseal globe valves * Coker isolation valves * Actuators: electric, bevel gear, pneumatic and hydraulic linear, and scotch yoke quarter turn. * Valves in oxygen, chlorine, phosgene, and HF acid service * Disc and fit gate valves in the shop and the field * Safely test valves according to applicable Code test requirements while applying and utilizing manufacturer's manuals using compressed air, water, and nitrogen using equipment such as the block valve test stand and hydrostatic pumps. Accurate and thorough completion of test reports with all required detail is essential. * Tag, seal, and prepare products for shipping while maintaining pride in workmanship including priming and painting products while adhering to all safety rules including proper clean-up and paint waste disposal. Palletizing and protecting tags, flanges, and threaded areas during the painting process are important. * Safely perform final inspection process documenting any findings * Read and record measurements using standard measuring tools such as manual torque wrenches, dial calipers, vernier calipers, micrometers, thread gauges, tape measure, and scale. * Safely perform preventative maintenance on vehicles, equipment, and tools such as trucks, compressors, teardown equipment, paint guns/equipment, test stands, pneumatic tools such as grinders/impacts, and forklift including accurate and timely completion of required documentation and reporting. * Understands and ensures that the JHC TCC (Total Customer Commitment) standards are upheld at all times * Actively and enthusiastically supports JHC colleagues at all times * Builds and cultivates solid relationships - internally and externally * Travels when required and applicable * Regular and predictable attendance is essential for this position. * Must be able to drive a company owned vehicle which includes meeting specified criteria to do so as well as following all policies and requirements to remain in good standing. The above list of duties and responsibilities does not constitute the entire list and the list can be changed, when necessary, at the discretion of management when business needs, customer demands, and other industry or job- related circumstances arise. Education and/or Work Experience * High School or Equivalent * Technical/Trade School preferred * Minimum 2 years of experience in valve repair industry * TWIC, OSHA Safety, Security Passport * Valid State issued driver's license Supervisory Responsibilities ☒No ☐Yes, please list direct report's titles Travel As needed throughout Gulf Coast region Competencies Customer Focus Integrity Safety Initiative Strong Mechanical Aptitude Tenacious Professional in appearance and actions Demonstrated ability to read, write and verbalize in a professional, organized manner Highly inquisitive about industrial process industry Successful in interfacing with customers, internal and external Demonstrated problem solving abilities Self-Starter and Self-Directed This position has three levels within the job. Progression through each level depends on specific knowledge, skills, and abilities. Evaluations are conducted and employees are assessed on growth and major competencies. Level requirements can be found on the company's intranet.

UTLX As a part of the global industrial organization Marmon Holdings-which is backed by Berkshire Hathaway-you'll be doing things that matter, leading at every level, and winning a better way. We're committed to making a positive impact on the world, providing you with diverse learning and working opportunities, and fostering a culture where everyone's empowered to be their best. The Railcar Technician conducts all aspects of repair and maintenance on tank cars. This person must demonstrate good leadership and team skills while being a safety-conscious person. Union Tank Car Company (UTLX) provides leasing, manufacturing, and repair services to our customers and owns/manages one of the largest fleets of railroad tank cars in North America. Our manufacturing plants are state-of-the-art, and our fleet is maintained by a large, sophisticated repair network consisting of geographically-placed repair shops and mobile repair crews. With over 126 years in this industry, UTLX has a long history that provides a solid name and foundation on which to build customer relationships. UTLX is financially stable and a Berkshire Hathaway company. Our field site locations currently number about 80 throughout North America. We are searching for people with a positive outlook and strong work ethic to become part of the UTLX success story. Job Description The Railcar Repair Technician conducts all aspects of repair and maintenance on tank cars. This person must demonstrate good leadership and team skills while being a safety-conscious person. * Railcar Repair - always uses current repair procedures. Conducts railcar inspections to ensure cars are in compliance and performs repairs as necessary. * Customer Support - Meets the expectations and requirements of all customers to ensure their satisfaction of work. * Clerical - ensures that all necessary invoicing, inspection, work order information is complete. * Maintains all certifications, including tank car welding, complete and maintain required certifications, demonstrates strong familiarity with AAR rules and regulations. * Other work-related tasks as assigned. General Requirements: * High school diploma or GED required. * Must have mechanical aptitude, ability to problem-solve and to make decisions. Ability to use hand tools (such as pipe wrenches, pry bars, wrenches, ratchets, and other equipment to chip and grind weld slag or spatter). * Must handle and successfully complete basic railcar repairs and inspections. * Consistently demonstrate skill in customer relations, using good interpersonal skills and be able to work as a part of a team. * Demonstrate welding abilities with an increasing display of performance. Ongoing improvement in skill and knowledge of railcar repairs. * Must work in all types of weather conditions. * Valid Driver's License * A strong emphasis in welding. Physical Requirements * Must be able to stoop for extended periods and routinely move from kneeling to standing positions * Must be able to wear a respirator * Must be able to lift up to 50 pounds from the ground surface * Must be able to climb ladders and perform work at elevated heights * Must be able to work in confined spaces * Must be able to physically fit into a man-way opening as small as 18" in diameter (site applicable) * Must be able to pass company physical exam. Equal Opportunity Employer Minorities/Women/Veterans/Disabled Following receipt of a conditional offer of employment, candidates will be required to complete additional job-related screening processes as permitted or required by applicable law. We are an equal opportunity employer, and all applicants will be considered for employment without attention to their membership in any protected class. If you require any reasonable accommodation to complete your application or any part of the recruiting process, please email your request to ******************, and please be sure to include the title and the location of the position for which you are applying.

Performs quality inspections in accordance with established procedures. Responsibilities: Performs inspections and tests in accordance with established procedures. Inspections and tests include mechanical, dimensional, document review, receipt, visual, radiographic, magnetic particle, liquid penetrate, ultrasonic, leak testing and material verification. Operation, setup, calibration and maintenance of associated equipment and instrumentation. Must be capable of providing oversight and discipline-specific guidance to Level I personnel. Evaluate and report inspection and test results. Will be required to adhere to all safety procedures and maintain work areas in a clean and orderly manner, in addition to various assigned responsibilities. Responsible for observing and complying with all safety and project rules. Performs other duties and activities as required. Relies on instructions and pre-established guidelines to perform the functions of the job. Has knowledge of commonly used concepts, practices, and procedures within a particular field. Works under minimum supervision. Typically reports to a supervisor. Education and Experience: May require a high school diploma or its equivalent with 3-5 previous years of experience in the field or in a related area. Certified with NACE and AMPP is required. Physical Requirements: Ability to reach, stand, walk, finger, grasp, feel, talk, hear, see and to perform repetitive motions. Ability to reach with hands or arms, stand, walk, use hands or fingers, grip, grasp, feel, talk, hear, see, climb or balance, stoop, kneel, crouch and crawl and to perform repetitive motions. Ability to sit at a desk and operate computer for extended periods of time. The ability to lift and carry 15 lbs. on a regular basis is required and at times lifting up to 25 lbs. may be required. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

The preparation, assembly, and repair of various types of oilfield products. Stamping and labeling equipment. Able to operate air tools. Responsible for ensuring compliance with established corporate standards. Comply and participate in the company Health and Safety program. Excellent housekeeping of shop and work area is required. This position is a part of an on-call rotation and may require travel to remote job site locations as well as, occasional international travel. Active participation in FET's Health, Safety and Environment program is required. Other duties as assigned. Job Duties/Responsibilities. * Performs independent, routine, or repetitive assignments using a variety of simple techniques and standard work procedures. * Troubleshooting of equipment to identify/diagnose problems * Equipment tear down, repair and reassembly using hand and air tools * Maintain excellent housekeeping practices * Ability to travel to remote job site locations as needed * Occasional international travel as needed * Participation in the rotational on-call schedule * Active participation in FET's HSE program. JOB REQUIREMENTS Skills/Knowledge * Basic knowledge of hydraulics & mechanics * Must have a mechanical aptitude * Basic computer skills including Microsoft Office Suite * Good communication and comprehension skills (verbally and written) * Ability to trouble shoot and problem solve independently * Comfortable working in a fast-paced environment, with the ability to change direction as needed * Capable to regularly lift and/or move up to 20 pounds, frequently lift and/or move up to 45 pounds. Education * High School Diploma or equivalent * Valid driver's license required. Experience * 3+ years' experience in a mechanical based role * Experience related to hydraulics preferred, but not required * Prior experience with drilling rigs considered an asset. This is a safety sensitive position. About FET FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries. FET is headquartered in Houston, TX with quality manufacturing, efficient distribution, and service facilities conveniently located to support the major energy-producing regions of the world. Forum's products and services range from the underwater reservoir to the refinery, from the sea floor to the above ground transportation line. We pride ourselves on giving you a comprehensive offering of solutions to maximize your operations and improve your bottom line. Our customers are our partners and we work with them to solve their ever-changing challenges. FET is an Equal Opportunity Employer. FET does not discriminate on the basis of race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected under federal, state, or local law. All employment decisions and practices at FET are subject to the foregoing non-discrimination provisions and are based solely on merit, competence, performance, and business needs at the time.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: This position will apply corrosion knowledge and skills to repair, install, troubleshoot, analyze, and perform other predictive and preventative maintenance tasks on assigned equipment, facilities, systems and associated devices contained within gas and liquid facilities and pipelines. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Under general direction, provide for design, installation, operation, inspection and maintenance of the cathodic protection systems within an assigned segment of the pipeline system, compressor stations or plant facilities in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements * Maintain working knowledge of regulatory requirements, perform associated required tasks, and complete required documentation (OSHA, DOT, EPA, etc.) * Investigates and analyzes corrosive conditions for existing and/or proposed facilities * Responsible for corrosion control and associated compliance of cathodically protected pipelines, compressor stations or plant facilities, and other buried, submerged, or above ground facilities * Proactively conduct pipe-to-soil potential surveys, casing-to-soil readings, rectifier and bond readings, current flows on pipeline, and foreign pipe-to-soil readings and all other structures under cathodic protection on a frequency as stated in SOPs or meet regulatory requirements and document in the corrosion database or other forms, records or reports * Evaluate protective coating condition including internal, external and atmospheric systems and make repairs as needed, evaluate pipe anomalies and perform remaining strength calculations in accordance with established procedures * Have an understanding of pipeline internal corrosion mechanisms and related mitigation measures including treatment and testing, collection of samples, bacteria, pH, dissolved H2S, and C02 testing and analysis, and perform chemical requirement calculations * Perform cathodic protection design including current requirement calculations and soil resistivity testing * Generate and maintain the reports covering rectifiers, bonds, pipeline isolation and annual corrosion control reports * Install, maintain and repair rectifiers, anodes systems, cables, bonds, test stations and perform ground bed efficiency calculations * Evaluate the effects of stray currents from other sources (i.e., traction systems, coal mines, AC transmission lines, etc.) and take the necessary action(s) to mitigate their effect on Energy Transfer facilities * Read and interpret pipeline maps, as-builts and PLD's * Must use and operate all pertinent safety equipment when performing duties in potentially hazardous areas (arc flash protective PPE, respirator, hard hat, safety glasses, etc.) * Must display workmanship consistent with Partnership SOPs industry standards, partnership work practices, applicable codes and/or engineering drawings and sketches * Insure facilities, grounds, and work areas are maintained in a safe, orderly, and functional manner * Communicate with other technicians for assistance in effecting repairs when applicable * Ability to train others in discipline job tasks and to confirm knowledge, skills and abilities of others as an evaluator for partnership skill qualification program dependent upon position level * Actively participate in PHMSA or State regulatory audits * Actively participate in partnership safety program and initiatives * Inspect crew welds on full wrap and pumpkins for acetylene welds and surface pitting that is discovered during corrosion activities such as pipeline recoats and exposure repair * Comply with partnership safety policies and procedures * Perform energy isolation lockout/tagout procedures (LOTO) Required Education: * High school diploma or GED Required experience is commensurate with the selected job level: * Level C requires a minimum of 0 - 2 years of relevant industry experience or equivalent work experience * Level B requires a minimum of 2 - 4 years of relevant industry experience or equivalent work experience * Level A requires a minimum of 4+ years of relevant industry experience or equivalent work experience Required Qualifications: * Must maintain valid driver's license in state of residency * Proficiency with MS Office Suite products * Ability to train other technicians and/or sign off on qualifications Preferred Qualifications: * Associate of Applied Science - Corrosion Technology * NACE Corrosion Technician or Corrosion Technologist Certification * NACE CP level II * Welding school qualifications for inspection of welds Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Working conditions may include confined spaces * Repetitively standing, walking, bending, stretching, reaching over shoulder height, and climbing ladders up to 25 feet. Occasionally lifting up to 50 lbs with or without assistance * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and may require appropriate personal protective equipment * Reliable attendance at work * Occasional overnight travel may be required

Do you want to learn a skilled trade in the oil and gas industry? Would you love a new career with a company offering training, opportunities to advance, and the potential for multiple pay increases in your first year? Apply for our Entry Level position with Alliance! As a Monitoring Technician, you will work in a recession-proof industry protecting the environment and have the opportunity to learn and advance within our rapidly growing company. We offer a starting pay rate of $19.05 with a clear career path for upward mobility, paid time off, great benefits, and quarterly profit-sharing bonuses. Apply now! During our comprehensive training process, you will learn the following responsibilities for the Entry Level Monitoring Technician (LDAR) position which are located onsite at our client sites: Daily monitoring of components to detect leaking equipment (valves, pumps, connectors, etc.) which can be a source of emissions and volatile hazardous air pollutants Perform and record calibrations on analyzers before use Perform preventative maintenance and troubleshooting on analyzers Identify and report changes to components while performing monitoring Identify and report new or removed components while performing monitoring Identify and report Audio Visual Olfactory (AVO) leaks, Open-Ended Lines (OEL) Identify and report components with missing identification tags Support leak repair activities at customer work sites as required Complete Job Hazard Analysis (JHA) daily Complete Equipment and Vehicle Inspections as required Complete daily paperwork (job summary, component change forms, missing tags, etc) Attend and participate in daily toolbox meetings and scheduled safety meetings Complete all safety and knowledge trainings as assigned Requirements: Ability to pass a comprehensive background check and drug screening Ability to be on your feet for 8-10+ hours per day on uneven ground (concrete, rock, grass, mud/dirt, etc.), while wearing the monitoring backpack (weighing up to 25 lbs.) as well as carry other equipment as needed (ladders, water coolers, etc.) Love being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders to high heights (up to 300ft) Ability to understand and use hand-held device, and have some mechanical abilities (preferred) Reliable transportation to the worksites is required Key Benefits Include: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #ELLDAR

At LSCG, we take a people-first approach to construction. We know communications infrastructure construction isn't just about fiber and towers. It's about collaboration and honesty. At LSCG, a Full Circle Fiber Partners company, we bring more than steel toes and hard hats to the job site - we bring teamwork and integrity, and we do everything with a mindset of safety. Just as a well-placed network connects a community, a well-organized team powers all projects to success. Service excellence, pioneering experience, and a passion for what we do - that's LSCG. LSCG is a dynamic organization of diverse, customer-focused people committed to our Core Values: Service Excellence, Accountability, Safety, Integrity, Fairness, and Mutual Respect. We are looking for motivated and professional individuals to grow with our team. LSCG offers competitive wages and a comprehensive benefits package that includes health, dental, matching 401K, and more. Job Summary * Splicing large & small count Fiber Cables Mid Sheath Cuts. Minimum Required Qualifications * Utilize proper techniques to splice fiber optic cable. * Prep/Splice single-mode (SM) and multi-mode (MM) optical fiber cables * Troubleshooting of fiber utilizing an OTDR. * Strong communication skills are required between the splicer and tech ops manager to address problems as soon as possible. * Proper record keeping and be able to review cable records as necessary. * Knowledge, understanding, and practice of safety regulations within OSHA, NESC, NEC, and other construction-related guidelines. * Maintain equipment and vehicle to a high standard. * Work indoors and outdoors as needed. * Iterate to the project/construction managers detailed accounts of field activity, both verbal and written. * Coordinate with tech ops managers to verify and perform work as directed. * Night work as needed for things like node splits. * Able to be on call for emergencies involving damaged cables. * Must know ribbon fiber. * Must know fiber to the home. Tasks Required by a Fiber Splicer * Utilize Fusion Splicer to splice Loose Tube & Ribbon fiber cable. * Prep/Splice single-mode (SM) and multi-mode (MM) optical fiber cables * Troubleshooting of fiber utilizing an OTDR. * Strong communication skills are required between the splicer and tech ops manager to address problems as soon as possible. * Proper record keeping and be able to review cable records as necessary. * Knowledge, understanding, and practice of safety regulations within OSHA, NESC, NEC, and other construction-related guidelines. * Maintain equipment and vehicle to a high standard. * Work indoors and outdoors as needed. * Iterate to the project/construction managers detailed accounts of field activity, both verbal and written. * Coordinate with tech ops managers to verify and perform work as directed. * Night work as needed for things like node splits. * Able to be on call for emergencies involving damaged cables. * Must know ribbon fiber. * Must know fiber to the home. Knowledge required by a Fiber Splicer * Telecommunications- Knowledge of transmission and CATV telecommunications systems. * Public Safety- Knowledge of keeping the work area safe for the public. * Computers and Electronics- Knowledge of electronic equipment and computer hardware/software for keeping proper records. * Mechanical- Knowledge of optical splicing equipment like a cleaver, splicer, and bucket truck Work Conditions - Field environment, working in inclement weather; Flexibility of schedule. Disclaimer Statement This is not necessarily an exhaustive list of all responsibilities, duties, skills, efforts, requirements, or working conditions associated with this position. While this is intended to be an accurate reflection of the current job, management reserves the right to revise the job or to require that other or different tasks be performed as assigned. Salary Description $24-38

Veolia Group is a global leader in environmental services, operating across all five continents with nearly 218,000 employees. Specializing in water, energy, and waste management. Veolia Group designs and implements innovative solutions for decarbonization, depollution, and resource regeneration, supporting communities and industries in their ecological transformation. Within this framework, Veolia's Water Technology Business brings together a dedicated team of experienced professionals committed to tackling the world's most complex challenges related to water scarcity, quality, productivity, and energy. Together, we pursue a shared mission to create a more sustainable future. Job Description Job Summary: As a Field Service Representative, you'll be on the front lines providing operations and maintenance expertise on water treatment systems for one of our customers from one of a variety of industries. This mission critical role involves working on a variety of technologies including, media filtration, wastewater, softening, reverse osmosis (RO), ion exchange (IX), de-oxygenation, electro deionization, and ultrafiltration (UF). Key Characteristics * Conduct maintenance and calibration activities * Consult with customer management and operation teams * Excellent mechanical know how and problem-solving skills * Ensure contract compliance of volume and quality specifications * Operate, monitor, and optimize equipment performance Duties & Responsibilities * Carry out mechanical, electrical and controls troubleshooting on equipment such as valves, air compressors, ejectors, process pumps, blowers, and instrumentation * Create and maintain site paperwork, and provide customers with detailed technical summaries of work performed * Maintain inventory of spare parts and adequate supply of chemicals and replacement parts * Monitor and maintain chemical injection systems * Perform analytical testing such as: turbidity, hardness, chlorine, pH, CO2, O2, SDI, TOC, in addition to various other site-specific testing requirements * Enter and complete work orders in Maintenance Program (MaintainX) * Other duties as assigned Qualifications Knowledge, Skills & Abilities Required * 2 years of experience in Industrial, oil field, refineries, chemical plants * Electrical, chemical, and/or mechanical experience * Basic computer skills (email, data entry, online training, EHS reporting) * Able to lift 50lbs Preferred Skill * Forklift Experience/Training Education & Experience Required: * High School Diploma / GED / Home School Certification OR international equivalent 2+ years' experience of service/maintenance or equivalent in an industrial environment * Current TWIC Card is required * Current Driver's License Preferred (if applicable): * Bachelor or Associates Degree in Science/Engineering (STEM) or technical certificate in Instrumentation, electrical, mechanical Working Conditions * 5% travel (training/other site visits) * Hot, dirty, loud, moving equipment * Working with chemicals for water treatment Additional Information At Veolia, we realize diverse teams make smarter decisions, deliver better results, and build stronger communities. We're an organization that champions diversity and inclusion at every rung of the ladder and are proud to be an equal opportunity workplace. Because our people are our greatest assets, we also offer competitive compensation and benefits that include: ● Medical, Dental, & Vision Insurance Starting Day 1! ● Life Insurance ● Paid Time Off ● Paid Holidays ● Parental Leave ● 401(k) Plan - 3% default contribution plus matching! ● Flexible Spending & Health Saving Accounts ● AD&D Insurance ● Disability Insurance ● Tuition Reimbursement Disclaimer: The salary, other compensation, and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, subject to applicable law. Applicants are required to be eligible to lawfully work in the U.S. immediately; employer will not sponsor applicants for U.S. work authorization (e.g. H-1B visa) for this opportunity Veolia does not accept unsolicited resumes from external recruiting firms. All vendors must have a current and fully executed MSA on file before submitting candidates. Any unsolicited resumes and candidate profiles will be deemed the property of Veolia, and no fee will be due. As an inclusive company, Veolia is committed to diversity and gives equal consideration to all applications, without discrimination.

A Field Service Technician - CV II will be skilled and understand the purpose and principles of operating control valves. This role is responsible for installation, connection, servicing, testing, adjustment, repair, maintenance, removal, troubleshooting, inspection, and replacement of control valves. Responsibilities: All additional job responsibilities of a Field Service Technician - CV I Locate, use, and comprehend manufacturer installation and operation manuals Perform inspection to identify necessary corrective action as authorized Assemble, test, and troubleshoot valves and other equipment per applicable codes and standards per manufacturer and customer requirements Install instrumentation/accessories as necessary Operate diagnostic equipment (i.e. Valscope, profiler, etc.) Perform calibration of measurement equipment in accordance with internal quality procedures Measure and record critical dimensions per manufacturer specifications Support Field Service Technician - CV I employees through mentoring and on-the-job training May act in a leadership role for assigned jobs Demonstrates sound judgment with the ability to make decisions and corrections when problems are identified or detected when servicing control valves in the field Ensures all products repaired/assembled meet the quality standards in accordance with procedures, engineering specifications, drawings, and work instructions Performs functional tests as required Collects data and documents and prepares detailed reports for customer review, billing records, and expense reporting Assumes responsibility and handles multiple tasks under potentially stressful and hazardous conditions Adheres to all policies and procedures Practices safe work habits to ensure an injury free environment Uses physical force to lift, push, pull, and hold equipment and tools Climbs and works at various heights, sometimes working in a standing, sitting, lying down, crouched, or kneeling position Routinely reacts to visual, aural, and other signals, including alarms and instructions, and is required to visually inspect work Be on the job and available to work overtime, at times for extended periods of time based on seasonal customer demands Operate motor vehicle, as required Attend job and safety training, as necessary or required Any job duties as assigned by supervisor or manager Positional Requirements & Qualifications: Education & Experience: HS Education or GED Equivalent a plus 2 - 5 years of industry experience Skills & Abilities: Meets all Control Valve Technician I qualifications and requirements Proficient in Control Valve Technician I responsibilities Completed MARC II certification Successful completion of all applicable Quality Standardization Procedures Successful completion of Control Valve Level II Written and Performance Tests Basic OSHA and TWIC card (TWIC, only if required) Demonstrate the ability to properly assemble and test valves/equipment of multiple control valve manufacturers Demonstrate proficient use of precision dimensional equipment (i.e. dial caliper, micrometer, etc.) Demonstrate ability to bend and fit tubing Completed inspection assessment Completed certification training for use of Positive Material Identification (PMI) equipment Completed diagnostic equipment training and/or certification Demonstrate proficiency at pneumatic and digital positioner calibration Effective oral & written communication skills Demonstrated “can do” attitude and excellent customer service skills Supervision: Minimal supervision required Must be able to travel and have a clear driving record in accordance to company driving guidelines Clear background check and drug/alcohol screening Essential Physical Functions Lifting: up to 50 pounds Adjusting or moving objects up to 50 pounds in all directions Lift and carry: 50 pounds for 100 feet Bending, stooping, walking and climbing stairs Able to pass periodic medical evaluations and respirator fit tests to ensure continued compliance with OSHA standards. Ascending or descending ladders, stairs, scaffolding, ramps Moving self in different positions to accomplish tasks in various environments including tight and confined spaces Remaining in a stationary position, often standing or sitting for prolonged periods Moving about to accomplish tasks or moving from one worksite to another Communicating with others to exchange information Repeating motions that may include the wrists, hands and/or fingers Operating machinery and/or power tools Operating motor vehicles or heavy equipment Assessing the accuracy, neatness, and thoroughness of the work assigned Required physical ability if mandated by customer or regulatory requirements Thisjobdescriptionisintendedtodescribethegeneralnatureandleveloftheworkbeingperformed.Thisisnotanexhaustivelistofalldutiesandresponsibilities.Thecompanyreservestherighttoamendandchangeresponsibilitiestomeetbusinessandorganizationalneedsasnecessary.

* Perform repair receiving write-up process manually and electronically * Safely pretest valves * Safely disassemble and clean valves and parts per QCP and OEM specifications * Evaluate parts and maintain material awareness * Safely assemble valves from repair order instructions, customer test-report/specification sheets, GCS procedures, QSM/QCP manuals, and OEM IOM manuals; this includes performing the lapping process as applicable. * Safely test valves according to applicable Code test requirements while applying and utilizing manufacturer's manuals using compressed air, water, steam and nitrogen. * Tag, seal, and prepare products for shipping while maintaining pride in workmanship including priming and painting products while adhering to all safety rules including proper clean-up and paint waste disposal. Palletizing and protecting tags, flanges, and threaded areas during the painting process are important. * Safely perform preventative maintenance on vehicles, equipment, and tools such as trucks, compressors, teardown equipment, paint guns/equipment, test stands, pneumatic tools such as grinders/impacts, and forklift including accurate and timely completion of required documentation and reporting. * Understands and ensures that the JHC TCC (Total Customer Commitment) standards are upheld at all times * Actively and enthusiastically supports JHC colleagues at all times * Builds and cultivates solid relationships - internally and externally * Travels when required and applicable * Regular and predictable attendance is essential for this position. The above list of duties and responsibilities does not constitute the entire list and the list can be changed, when necessary, at the discretion of management when business needs, customer demands, and other industry or job- related circumstances arise. Education and/or Work Experience * High School or Equivalent * Technical/Trade School preferred * A minimum or 5 years in the valve repair industry preferred * TWIC, OSHA Safety, Security Passport * Valid State issued driver's license Supervisory Responsibilities ☒No ☐Yes, please list direct report's titles Travel As needed throughout Gulf Coast region Competencies Ethics and Values Integrity Customer Service Strong Mechanical Aptitude Demonstrated ability to read, write and verbalize in a professional, organized manner Moderate computer skills Self-Starter and Self-Directed This position has three levels within the job. Progression through each level depends on specific knowledge, skills, and abilities. Evaluations are conducted and employees are assessed on growth and major competencies. Level requirements can be found on the company's intranet. Physical Requirements Physical Abilities N O F C Lift / Carry N O F C Stand X 10 lbs or less X Walk X 11 - 20 lbs X Sit X 21 - 50 lbs X Handling / Fingering X 51 - 100 lbs X Reach Outward X Over 100 lbs X Reach Above Shoulder X Push / Pull N O F C Climb X 12 lbs or less X Crawl X 13 - 25 lbs X Squat or Kneel X 26 - 40 lbs X Bend X 41 - 100 lbs X N (Not Applicable) Activity is not applicable to this occupation O (Occasionally) Occupation requires this activity up to 33% of the time (0 - 2.5+ hrs / day) F (Frequently) Occupation requires this activity from 33% - 66% of the time (2.5 - 5.5+ hrs / day) C (Constantly) Occupation requires this activity more than 66% of the time (5.5+ hrs / day)

Performs quality inspections in accordance with established procedures. Responsibilities: Performs inspections and tests in accordance with established procedures. Inspections and tests include mechanical, dimensional, document review, receipt, visual, radiographic, magnetic particle, liquid penetrate, ultrasonic, leak testing and material verification. Operation, setup, calibration and maintenance of associated equipment and instrumentation. Must be capable of providing oversight and discipline-specific guidance to Level I personnel. Evaluate and report inspection and test results. Will be required to adhere to all safety procedures and maintain work areas in a clean and orderly manner, in addition to various assigned responsibilities. Responsible for observing and complying with all safety and project rules. Performs other duties and activities as required. Relies on instructions and pre-established guidelines to perform the functions of the job. Has knowledge of commonly used concepts, practices, and procedures within a particular field. Works under minimum supervision. Typically reports to a supervisor. Education and Experience: May require a high school diploma or its equivalent with 3-5 previous years of experience in the field or in a related area. Certified with NACE and AMPP is required. Physical Requirements: Ability to reach, stand, walk, finger, grasp, feel, talk, hear, see and to perform repetitive motions. Ability to reach with hands or arms, stand, walk, use hands or fingers, grip, grasp, feel, talk, hear, see, climb or balance, stoop, kneel, crouch and crawl and to perform repetitive motions. Ability to sit at a desk and operate computer for extended periods of time. The ability to lift and carry 15 lbs. on a regular basis is required and at times lifting up to 25 lbs. may be required. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Description The preparation, assembly, and repair of various types of oilfield products. Stamping and labeling equipment. Able to operate air tools. Responsible for ensuring compliance with established corporate standards. Comply and participate in the company Health and Safety program. Excellent housekeeping of shop and work area is required. This position is a part of an on-call rotation and may require travel to remote job site locations as well as, occasional international travel. Active participation in FET's Health, Safety and Environment program is required. Other duties as assigned. Job Duties/Responsibilities. Performs independent, routine, or repetitive assignments using a variety of simple techniques and standard work procedures. Troubleshooting of equipment to identify/diagnose problems Equipment tear down, repair and reassembly using hand and air tools Maintain excellent housekeeping practices Ability to travel to remote job site locations as needed Occasional international travel as needed Participation in the rotational on-call schedule Active participation in FET's HSE program. JOB REQUIREMENTS Skills/Knowledge Basic knowledge of hydraulics & mechanics Must have a mechanical aptitude Basic computer skills including Microsoft Office Suite Good communication and comprehension skills (verbally and written) Ability to trouble shoot and problem solve independently Comfortable working in a fast-paced environment, with the ability to change direction as needed Capable to regularly lift and/or move up to 20 pounds, frequently lift and/or move up to 45 pounds. Education High School Diploma or equivalent Valid driver's license required. Experience 3+ years' experience in a mechanical based role Experience related to hydraulics preferred, but not required Prior experience with drilling rigs considered an asset. This is a safety sensitive position. About FET FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries. FET is headquartered in Houston, TX with quality manufacturing, efficient distribution, and service facilities conveniently located to support the major energy-producing regions of the world. Forum's products and services range from the underwater reservoir to the refinery, from the sea floor to the above ground transportation line. We pride ourselves on giving you a comprehensive offering of solutions to maximize your operations and improve your bottom line. Our customers are our partners and we work with them to solve their ever-changing challenges. FET is an Equal Opportunity Employer. FET does not discriminate on the basis of race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected under federal, state, or local law. All employment decisions and practices at FET are subject to the foregoing non-discrimination provisions and are based solely on merit, competence, performance, and business needs at the time.

* Travel - either alone or with team members - to customer sites both on and offshore with company supplied equipment to meet with customer to discuss operational problems with equipment * Perform Pre-Work JSA "Job Safety Analysis" * Assess condition and problems with equipment and make appropriate repair. * Assumes responsibility for communication and education between the company and clients * Responsible for communicating company deliverables to the client and for the accuracy and the timeliness of all internal and external communications and reporting. * Assumes responsibility for the overall safety of the work environment. Responsible for ensuring compliance with company, client, OSHA, and other applicable standards. Perform Behavioral Safety Observations as needed. Ensures that work area is clean, secure, and well maintained. * Assumes responsibility for related duties as required or special projects as assigned. * Training/Mentoring - A few of the activities in the area of Training/Mentoring will include but are not limited to: Assist in training/mentoring of new employees. Able to convey obtained knowledge from seminar/training sessions. * Able and willing to work on-call and off shift as required by customers or management. * Troubleshooting and repair of control and automated valve assemblies * Use of basic hand and measurement tools * Some lifting, bending and long-term standing required. * Ability to work independently in a fast-paced environment * Available to work overtime including some weekends. * Follow John H. Carter Co., Inc. policies, procedures and methodologies. * Work collaboratively with development staff and support staff to maintain thorough knowledge of product capabilities, and to ensure that all communications between John H. Carter Co., Inc. and its stakeholders are precise. * Fulfil all company safety training requirements. Customer site requirements. Filling CWX service-related documentation. Be able to exercise the stop work authority program. * Travel required up to 15% of the time. * Other duties may be assigned. III. Supervisory Responsibilities There are no supervisory responsibilities associated with this position.