Field technician jobs in Norton, MA - 711 jobs

Job Title: Field Service Technician Coverage area: Greater Boston area Department: Service (Operations) Reports to: Service Manager FLSA Status: Hourly, Non - Exempt SUMMARY: The Field Service Technician provides customer service in person and/or by telephone to customers in and around the greater Boston area. Technicians will also help fulfill the needs of the maintenance schedule when needed by performing preventative maintenance on parking access, as well as software and/or hardware. Works with upper-level support to troubleshoot/setup/configure car access systems to include LAN (Local Area Networks). Effectively understands and troubleshoots basic setup of credit card configuration within the PARCS (parking access & revenue control system) network. ESSENTIAL DUTIES AND RESPONSIBILITIES: Perform field repairs on parking access system and building access systems, software and/or hardware related Troubleshoot and correct problems on devices/equipment, down to board level, low voltage Correct/fixes; minor to complex software issues on parking/access systems Understand and troubleshoot the entire setup of a SKIDATA network (LAN) Properly identifies all network devices on a LAN (router, modem, switch etc.) Can properly use handheld devices like, but not limited to, multi meter, Network tester, toner, etc. Understand basic relay logic Works with upper-level support to setup/configure firewall, router, and other network devices Provides effective customer service, to internal and external customers Properly identifies when higher level support is needed. Work closely with peers and support team to ensure customer expectations are met Effectively execute troubleshooting instructions from higher level support Properly maintain vehicle status and maintenance, as required Properly maintains his/her inventory levels, by properly transacting in ERP (SNOW) system Communicates effectively with service coordinator, advisors, and service management team Responsible for transactions for assigned work orders (WOs) in ERP system on a per WO basis (parts and labor), also to include maintenance checklist, as required by existing processes Perform monthly preventative maintenance - scheduled inspection, cleaning, lubricating, and adjusting of the equipment Other duties, as assigned QUALIFICATIONS: This is an experienced position within the Service Department. To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required: Must be at least 21 years old, with a valid driver's license; have and maintain a driving record clean of any major or numerous violations Must be able to drive to field / customer locations to perform field work Working knowledge of Windows Server 2008/2012/2016, SQL, Windows OS 7, 10 and above, and network firewall configurations Must possess aptitude to learn new technologies The ability to work independently all while keeping others informed of your processes and progress via multiple avenues - including ERP System, email, and/or phone Proficiency in Microsoft Project, Excel, and PowerPoint Must be able to complete SKIDATA technical certified training courses - within 24 months; or has completed required certified courses in the technical career track. Specific product/equipment and software training supplied by SKIDATA EDUCATION and/or EXPERIENCE: High school diploma or general education degree (GED) or equivalent and two (2) years of training/experience in related field required, or equivalent combination of education and experience. Good skills in the use of hand tools required - experience using ERP software a plus. CERTIFICATES, LICENSES, REGISTRATIONS: Valid Driver's License, in state of residence. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to drive motor vehicle; sit; stand; walk; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop; kneel; crouch; or crawl; and talk; or hear. The employee must frequently lift and/or move more than 50 pounds. Specific vision abilities required by this job include close vision, distance vision, and depth perception; standing for long periods of time; climbing ladders, stairs, ramps; handling and assembling small parts, use of a variety of tools and equipment such as power construction equipment, measuring devices, power tools, and testing equipment including oscilloscopes, ammeters, and computers/digital equipment. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is frequently exposed to moving mechanical parts and/or automobiles. The employee is occasionally exposed to wet and/or humid conditions; fumes or airborne particles; toxic or caustic chemicals; outside weather conditions; risk of electrical shock. The noise level in the work environment is usually moderate to occasionally loud. TRAVEL: There may be occasional travel outside of the employee's regular region; this travel may be by airplane or vehicle and will be planned with as much advanced notice as possible. SCHEDULE: Monday through Friday - Available 8am - 5pm. Saturday and Sundays - Possible with advance notification. The general hours of the position are Monday through Friday (8 a.m. to 5 p.m.); however, the expectations are that you be flexible to work as the needs of the business require. This may require occasional overtime; working on Saturday/weekends; and/or before or after the hours of 8 a.m. to 5 p.m. Technicians are required to be on an on-call rotation for one week per month. Supervisor will give as much advance notice as possible and try to evenly distribute hours based on business needs among the employees with skills, knowledge and ability for the work that needs to be accomplished. SKIDATA Inc. is an equal opportunity employer. All qualified applicants for employment will be considered without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, status as an individual with a disability, veteran status, or any other basis protected by federal, state, or local law. EEO M / F / D / V

Environmental Field-Testing Technician Info: Alliance Technical Group provides the full spectrum of services to support our customers' environmental needs, and ultimately, helps protect the environment. We are currently hiring enthusiastic, adventurous, science or mechanically minded individuals who have the desire to obtain valuable work experience and learn on the job. In this role, you will have the unique opportunity to gain exposure to a variety of industrial processes, and travel to various customer locations typically in your region/state, with all travel expenses paid. The work is conducted safely outdoors, on emissions source platforms, often at elevated heights, so you must love being outside. Generous quarterly profit-sharing bonuses and plenty of overtime available, In addition, you'll receive a great benefits package, paid time off, and the ability to receive referral bonuses. Duties & Responsibilities: In this important position, you will conduct Stack Emissions Testing including equipment preparation, deployment, staging/breakdown, sample collection and recovery. During our comprehensive training process, you will learn the following responsibilities, and once experienced, have the opportunity for rapid advancement: Conduct on-site field testing in a professional manner and transport testing equipment to customer sites Follow all test methods, procedures, and processes for quality source testing Apply careful mechanical and electrical skills while troubleshooting testing systems Qualifications: Ability to pass a comprehensive background check and drug screening Must have a valid driver's license Enjoy being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders and work at elevated heights Degree in environmental, engineering, or mechanical sciences, or related experience skill and ability is highly preferred Experience related to environmental response/sample collection, mechanical, construction, or electrical work is helpful and preferred Experience with or strong aptitude to learn the use of the MS Office Suite (Word, Excel, Outlook) & Adobe products Ability and desire to be on your feet, lift equipment up to 75 pounds, climb ladders or stairs and work at elevated heights and use tools or equipment requiring a high degree of dexterity Ability to distinguish between shades of color is critical for safety Employee Benefits: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this entry-level role is $23-$26 per hour. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #FIELDSERVICES Equal Opportunity Employer This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Securitas Technology, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on ST products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities Installs intrusion, fire, CCTV, and access control security systems. Run electrical wiring in attics, crawl spaces, and other confined spaces, which can include drilling, trenching and aerial runs. Complete all wiring, connections, and equipment installations ensuring that security systems are complete and satisfy customer and contractual requirements. Assists and interfaces with the Installation Team Lead or Project Manager regarding on-site scheduling of work activities and timely delivery of equipment. Conducts tests to ensure all newly installed systems and component devices are operational. Troubleshoots new system installations to ensure proper functioning and to ensure system meets local, county, state, or federal codes; legal and/or insurance requirements. Presents a professional image both in personal and vehicle appearance. Performs work assignments in a safe manner and within specified cost limits. Promotes, builds, and maintains good customer relations and assists with contract retention. Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements. Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requested Minimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, fire alarm, access control, and CCTV security systems. High School Diploma or equivalent Vocational/Technical Degree in electrical, security, or computer systems preferred NICET Certification preferred IP Video and IT experience preferred Climb ladders that extend up to 24 ft. in height Carry items up to 75 pounds Ability to work on-call on a rotational basis covering after hours & weekend emergency calls. A valid state driver's license, without restrictions, is required. Securitas offers comprehensive benefits including: Highly competitive salary Company Vehicle Company Cell Phone Opportunity for annual merit pay increases. Paid company training Medical, Dental, Vision, and Life Insurance Company Paid Short Term and Long-Term Disability 401K with 60% Match up to 6% of salary Paid vacation, holiday and sick time Educational Assistance Exceptional growth opportunities Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

WILL PERMANENTLY RELOCATE TO CHINA AFTER TRAINING IS COMPLETED.* We are seeking high-potential, bilingual engineering talent to join Mevion's China Operations team. This role begins with structured training in the United States and transitions to supporting our cutting-edge proton therapy systems in China. Ideal candidates will be fluent in both English and Chinese, possess a strong STEM background, and be motivated to grow with a leading high-tech company in China's healthcare sector. Candidates should also demonstrate strong hands-on capability, the ability to work well under pressure, and a willingness to actively learn complex systems and contribute to the healthcare sector. Key Responsibilities: Install and test proton therapy systems at customer sites, including wiring, assembly, safety inspections, and initial equipment startup. Conduct calibration and testing activities, including subsystem setup, system operation, and troubleshooting. Assist in customer acceptance testing and ensure timely issue resolution. Perform equipment upgrades, preventive maintenance, and service documentation in accordance with company standards. Collaborate with global support teams and clinical site personnel to ensure system readiness and customer satisfaction. Maintain detailed service and maintenance records. Provide technical feedback on system performance and improvements. Participate in boot camps, team meetings, and cross-functional training sessions. Support knowledge-sharing initiatives and help train future cohorts as needed. Complete additional duties as assigned by management. Qualifications: Education: Bachelor's degree in physics, Biomedical Engineering, Electrical Engineering, Mechanical Engineering, Intelligent Medical Instruments, or a related STEM field. Language: Bilingual proficiency in Mandarin Chinese and English is required. Background: Candidates with a strong understanding of both U.S. and Chinese cultures are preferred. A background that includes education or experience in both regions is a plus. Skills: Basic understanding of software/hardware and network control systems. Skilled in interpreting schematics and technical documentation. Hands-on Experience with technical work, such as in labs, research, and/or competitions. Soft Skills: Strong sense of responsibility and execution. Excellent communication and collaboration abilities. Self-motivated and proactive. Ability to work in fast-paced, high-stakes environments. Work Conditions: Willingness to travel domestically and internationally. Open to rotating shifts and extended field assignments. Capable of and comfortable with working in environments containing low levels of radiation. All applicable protective standards are provided and adhered to as required. Due to the work environment, persons with pacemakers are not eligible for this position Development Path: Structured U.S. training program with hands-on system experience. Technical certifications to qualify as a Field Service Engineer. Long-term relocation to support China operations. Opportunities for accelerated growth within Mevion's global engineering team. The hiring range represents what Mevion Medical Systems, Inc. reasonably expects to pay for this position at the time of posting. The actual salary offered will depend on the selected candidate's qualifications, experience, skills, and other job-related factors.

Data Technician (Night Shift) Clearance Requirements: NA Contract (6-8 Months) Pay Rate: $20 - $26/hr We are seeking an experienced Data Technician / Structured Cabling Technician to support a large-scale Wireless Access Point (WAP) deployment project. This role is ideal for a hands-on professional with strong experience in Cat6 and fiber optic cabling, who thrives in fast-paced environments and takes pride in delivering high-quality infrastructure work. The technician will be responsible for installing, terminating, testing, and certifying structured cabling, as well as the physical installation of approximately 500 wireless access points across multiple building locations. This is a night-shift position (9:00 PM - 6:00 AM) and requires the ability to work independently while following industry standards and safety protocols. Key Responsibilities: Pull, terminate, label, and test Cat6 and fiber optic cabling Install and cable Wireless Access Points (WAPs) in accordance with project specifications Certify and document cable runs using industry-standard testers (Fluke or similar) Terminate cabling into patch panels, data racks, and network closets Interpret and follow blueprints, floor plans, and cable schedules Adhere to structured cabling standards (TIA/EIA) and project documentation Operate scissor or boom lifts safely while working at heights Maintain a safe, organized work environment and comply with all safety requirements Required Skills / Education: Minimum 2+ years of hands-on experience in structured cabling (Cat6 and fiber) Demonstrated experience independently installing and terminating WAPs Lift certification (scissor lift or boom lift) Proficiency using cable testing and certification equipment Ability to work overnight shifts with flexibility as needed Reliable transportation; Must supply personal hand tools, including: Cable cutters and strippers Punch-down tools Cable testers Must provide required PPE, including: Hard hat High-visibility vest Gloves Eye protection Steel-toe boots Preferred Qualifications: Experience reading and interpreting structured cabling drawings and floor plans Hands-on experience terminating into data racks and patch panels Familiarity with large-scale network or enterprise deployment projects About Seneca Resources: At Seneca Resources, we are more than just a staffing and consulting firm-we are a trusted career partner. With offices across the U.S. and clients ranging from Fortune 500 companies to government organizations, we connect professionals with opportunities that support long-term growth and meaningful impact. When you work with Seneca, you gain access to competitive compensation, comprehensive health, dental, and vision benefits, 401(k) retirement plans, and a dedicated team that advocates for your success. We take the time to understand your career goals and align you with roles that match your expertise and ambitions. Seneca Resources is proud to be an Equal Opportunity Employer, committed to building a diverse and inclusive workforce. We encourage all qualified individuals to apply.

The Military Field Service Representative (FSR) located in Tolemaida, Colombia, will support the Colombian military in their operation, management, repair, installation, and maintenance of assigned GE equipment for starting up and operating a T700 engine depot. In this role, the FSR will act as a liaison between GE Aerospace and the customer. Candidates must be mobile to meet the needs of the customer, program and business. **Job Description** **Job Title** T700 Depot Military Field Service Representative - Tolemaida, Colombia **Company Intro/About GE Aerospace** GE Aerospace is a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We power flight safely and reliably for today, tomorrow, and the future, partnering closely with customers to deliver high-quality outcomes with speed and efficiency. **Site, Business, OR Functional Area Overview** This role supports the startup and sustained operation of a T700 engine depot in Tolemaida, Colombia, serving the Colombian military's helicopter fleet. The Field Service organization is focused on operational readiness, on-time delivery, and cost-effective maintenance solutions that meet contractual and mission requirements. **Role Overview** The Military Field Service Representative (FSR) will serve as GE Aerospace's on-site liaison to the Colombian military, supporting depot startup and ongoing repair, installation, troubleshooting, and maintenance activities for T700 turboshaft engines. The FSR will coordinate technical support, drive issue resolution, and enable customer success while meeting contractual, safety, and quality objectives. **Key Responsibilities** + Act as the single point of contact to the customer for timely resolution of depot-level tooling, maintenance, repair, and engine management concerns + Establish and maintain strong on-site relationships to provide ongoing technical and business support + Provide hands-on technical assistance leveraging in-depth knowledge of T700 installation, operation, and troubleshooting to keep the customer on schedule + Use disciplined analytical methods to drive root-cause analysis; create presentations and spreadsheets (including pivot tables and Pareto charts) to track issues and implement lasting corrective actions + Exercise sound judgment to propose solutions beyond set parameters for complex maintenance and troubleshooting scenarios, drawing on internal and external resources + Lead low-risk projects and serve as a resource for colleagues; explain technical concepts and build consensus across maintenance, engineering, and management stakeholders + Uphold and promote safety, quality, delivery, and cost objectives; ensure compliance with export control and security requirements **Required Qualifications** + Fluent in Spanish and English (reading, writing, and speaking) + Bachelor's degree from an accredited college or university; or a High School Diploma/GED plus a minimum of 4 years in a field service representative or jet engine maintenance role + Minimum 3 years of field maintenance, modification, and repair experience on T700 engines + Strong oral and written communication skills with demonstrated ability to analyze and resolve problems + Ability and willingness to travel as required + Ability and willingness to obtain and maintain a U.S. Government security clearance **Desired Characteristics** + 5+ years of hands-on turboshaft engine maintenance experience + T700 experience across depot, organizational, intermediate, and flight line troubleshooting levels + Strong customer interaction and communication skills; proven leadership abilities + Demonstrated proficiency in repair troubleshooting, shop operations, testing of jet engines, and support equipment tooling + Ability to make formal presentations to maintenance, engineering, and management at all levels + Project management experience; ability to lead and influence customers and peers + Experience mentoring and transferring technical knowledge; strong written and oral communication + Ability to work independently with technical guidance as needed + High degree of tact and diplomacy to collaborate effectively with customers at all levels + FAA Powerplant license (preferred) **Additional Information** The base pay range for this position is $100,000.00-133,000.00 USD Annual The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 23rd, 2026 GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage, access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits includ tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time -off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or prog rams (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. © 2023 GE Aerospace and/or its affiliates. All rights reserved. Attorney-Client Privileged **Closing** At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Closing At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherw _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

About UsHighland Electric Fleets' mission is to make electric fleets accessible and affordable for all, enabling communities to realize the benefits of cleaner, quieter and healthier fleets. Highland is North America's leading provider of Electrification-as-a-Service (EaaS). Founded in 2019, Highland partners with school districts, municipalities, and fleet operators to make the transition to electric fleets simple and affordable. Highland proudly serves as the Official Electric School Bus Provider of the LA28 Olympic and Paralympic Games and Team USA. From pioneering vehicle-to-grid technology to managing some of the nation's largest electric school bus fleets, Highland delivers reliable, cost-effective solutions that support local communities and drive the future of transportation. What You Can Expect from Highland:· Competitive base salary and 10% performance-based bonus program· Mobile Maintenance Work Vehicle provided · Monthly cell phone and internet reimbursement of $130· 100% Health, Vision, and Dental coverage for employees & their dependents· 3 weeks accrued Paid Time Off and 5 Sick Days per year· 401(k) program and company match· Paid CDL and ASE pathing· A supportive, highly collaborative, team-oriented environment The Field Service Technician is enthusiastic about EVs and a self-starter who will work closely with customers to ensure that Highland's electric vehicles and charging stations are working properly and that buses can get students to where they need to be. No day will look the same, but responsibilities will include performing original equipment manufacturer-approved testing, repairs, and troubleshooting customer issues. Highland will provide the relevant training to repair all local equipment including basic electric vehicle functions, Level 2 EV chargers to DC Fast Chargers, and communications equipment.Key Responsibilities: Act as the company's on-site advocate for EV's and EVSBs, striving to achieve 90% overall uptime Represent the company at customer locations with the highest standards of professional conduct Retains a clean and safe work environment and brings any unsafe practices or conditions to management Diagnoses malfunctions and performs electric vehicle and charger repairs (e.g. adjust/test steering, electrical, cooling, lubricating, braking systems, drive trains, suspensions, power steering units, etc.) and related assigned duties within qualification level, in accordance with all relevant Federal, State/Provincial and local guidelines and requirements. Test-drives vehicles to ensure repair resolved Maintain detailed and timely documentation for troubleshooting and repairs, records time and materials used for each assignment in asset management platform Assist in managing of external support vendors to follow up and document repairs being made to Highland's assets Provides repair and maintenance assistance to junior technician staff Performs road calls and on the road repairs as assigned. Undergo electric vehicle and charger OEM and internal trainings Desired Qualifications: Minimum of 5+ years Electrician, Electric Vehicle, or Medium/Heavy duty truck Fleet repair experience Advanced Diagnostic, Electrical, and AC skills required Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals Knowledge of MS Suite products Possess the recommended tools for a Medium Duty technician as well as electrical diagnostics tooling Flexibility to work bus depot hours (early morning to afternoon) and weekends (when on scheduled shift) Clean Driving Record is required Requirements within 12 months of employment: Commercial Driver's License Required / Minimum 3 ASE certifications required (bonus compensation available if greater) / and Minimum of 4 OEM Certifications required (bonus compensation available if greater) Highland Electric Fleets provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Highland Electric Fleets complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

The Environmental Field Laborer (Field Tech) must be able to work in compliance on various remediation and industrial maintenance projects. They must adhere to and maintain strict compliance with corporate/office policies and procedures, established health and safety protocols, and all applicable local, state, and federal regulations. JOB RESPONSIBILITIES Execution of field work encompassed in remediation and industrial maintenance projects while under direct or indirect supervision. Correct completion of all job-specific, employee-related MER paper work including Timesheets, Daily Work Reports, Driver's Logs and Daily Tailgate Safety Meeting Forms. Understand and work within project's detailed scope-of-work to maintain strict compliance with contract documents, project schedules, and corporate policies and procedures. Work safely during all phases of performing the job duties required in the field. Ability to perform work inside areas of varying dimensions; involving squatting and crawling for possible extended periods. Ability to follow directions; read/speak and understand English; read and understand common danger placards / labels and hazardous warning literature including site safety plans. The ability to safely drive and perform safety checks on all vehicles for which licensed. Project work may require out of town travel for two weeks or more Must be able to understand and comply with company and client safety standards. Due to the diversity of both scheduled and non-scheduled projects, physical demands, and environmental conditions vary significantly depending on the project. Work outside year round in all types of weather. May work in environments that are extreme in nature like environmental conditions such as heat, cold, heights, hazardous chemicals, loud noises, dangerous equipment, long hours etc. May be exposed to varying levels of physical activities and physical extremes such as long periods of standing, walking, crouching, use of hands, and heavy lifting of up to 50 pounds or more. Must be clean shaven at all times to allow immediate donning and seal of respirator. QUALIFICATIONS Requires High School Diploma or GED (or equivalent reading, writing and reasoning skills). Experience in emergency response, manual labor, general construction and/or industrial cleaning is preferred. A valid driver's license is required. TWIC preferred. OSHA 40-HR HAZWOPER & Confined Space Entry certifications are desired but not required. Successful completion of a pre-employment background and substance screening process including, but not limited to, employment verifications, criminal search and Motor Vehicle Record (MVR) search as well continued verifications throughout employment to ensure that all records meet company policy standards. BENEFITS Competitive Salary Health, Dental and Vision Insurance 401k with Company Match Paid Time Off (PTO) Paid Holidays This is an hourly position; the hiring range for the Environmental Field Technician in Randolph, MA is: $22.00/hour - $25.00/hour The actual hourly rate offered will be determined based on multiple factors including but not limited to relevant skills and experience. Moran Environmental Recovery is an Equal Opportunity Employer.

TOMRA of North America is a top International Reverse Vending and Recycling Company. At TOMRA transformation is at the heart of everything we do. We transform ideas & technology to create intelligent and pioneering tools to support a sustainable future. Job Description TOMRA North America, a top International Reverse Vending and Recycling Company is looking for a Service Technician in Taunton, Massachusetts. Are you passionate about sustainability and having an impact on the environment? Do you like to figure out how to solve problems? Do you like working with customers to help them fix things they can't fix on their own? Do you like being able to work independently while having a team to support you? Does the opportunity to test your creativity and analytical thinking excite and motivate you? Do you want the opportunity for a career that offers rewards beyond a paycheck and benefits? If you answered yes to any or all of these, then being a Field Service Technician might be the right job for you. TOMRA of North America is recruiting for a Field Service Technician to repair and maintain our machines in the Syracuse region. The Field Service Tech will be responsible for traveling to various retail customer locations to analyze, test, troubleshoot, repair, or rebuild the mechanical and electrical components of our reverse vending machines which accept recyclable containers from customers. Candidates will need to possess strong customer service skills and the ability to interact with customers and consumers as well as intercompany departments. *** We provide you with a company vehicle *** Pay: $21 an hour Quarterly bonus potential Paid Training Schedule: 7:00am - 3:30pm Monday through Friday with Rotating Saturday/Sunday (alternating weekend days with a comp day during the week) (Schedules may change according to customer needs, weekend availability a must) Benefits: Medical Dental Vision 401K (or Pension for Union Regions) Qualifications Mechanical Ability to troubleshoot and repair or replace machine components. Electrical: Troubleshoot and replace electrical components. Ability to diagnose and repair electrical failures and faults Physical: Employee is required to use hands to assemble, disassemble and repair mechanical components. Must be able to regularly lift up to 50 lbs. and frequently push/pull up to 150 lbs. Job Requirements: Superb customer service and communication skills Must be proficient with laptops and windows OS Excellent safety record at previous employers Valid Driver's License Come be a part of the Resource Revolution! Additional Information All your information will be kept confidential according to EEO guidelines. #indsrvne

Sample Receiving Tech 1 (Client Services Tech 1) Schedule: Tuesday through Saturday, 3:00 PM - 11:30 PM Make an impact. Build a career. At Pace , we're committed to continuously moving science forward; to innovate and advance sustainable practices that improve the health and safety of our communities and lives. Ask any of us, and you'll hear the same thing repeated again and again: we work here because what we do positively impacts the world. If you're curious, driven and inspired by the idea of doing important work with real-world impact, there's no better place to build your career. Find your place at Pace Join us as a Client Service Technician, where you'll put your love of science to work in the sample receiving department of our environmental testing laboratory. You'll receive all the training you need to successfully take on your new role and grow an exciting laboratory sciences career at Pace . What you'll do Coordinate and perform sample-related activities, including shipping and receiving, processing and administration Maintain and update appropriate documentation and databases Participate in training on fundamental lab support policies, programs, and practices What you'll bring High school diploma or equivalent Experience in a laboratory or environmental testing setting is preferred, but not required Ability to perform work in a lab or office setting, remain standing for long periods, work around strong smells, and wear personal protective equipment while handling samples (e.g., lab coat, safety glasses and gloves; all PPE provided by Pace ). What we promise Comprehensive benefit program, including medical, vision and dental insurance, 401(k) matching and tuition reimbursement Opportunities to build a rewarding career An inclusive culture that stands for integrity, innovation and growth

Join Our Team as a Cable Technician! Are you looking for a rewarding career opportunity? Koscom Cable Inc. is hiring Cable Technicians across the US! Whether you're an experienced pro or just starting out, we want you on our team. Position: Cable Technician Type: 1099 contract Compensation: Weekly pay ranging from $1200-$1700 (experienced techs can earn up to $2000/week) Benefits: Training allowance, weekly paycheck Responsibilities: - Running cables from poles and inside homes (physical fitness required) - Verifying signal levels on cable outlets - Providing TV, Internet, and Phone services for customers - Installing equipment (modems, cable boxes) - Troubleshooting technical issues - Educating customers on our services Requirements: - Own a white VAN or pickup truck (leasing options available) - Valid drivers license - Active Social Security Number - iPhone/iPad for app usage - Conversational English (other languages welcome) - Ability to pass a drug test and background check - Ability to carry heavy objects (like a 28 ft ladder) - No Experience Necessary! We'll provide training to help you succeed. Apply Now! Leave a request and we'll reach out to you. Check out our employees in action: ********************************** ZTrc9afp8 ******************************************* ******************************************* *Applicants must successfully pass a drug test and background check after a conditional offer of employment is made.

Sample Receiving Tech 1 (Client Services Tech 1) Schedule: Tuesday through Saturday, 3:00 PM - 11:30 PM Make an impact. Build a career. At Pace , we're committed to continuously moving science forward; to innovate and advance sustainable practices that improve the health and safety of our communities and lives. Ask any of us, and you'll hear the same thing repeated again and again: we work here because what we do positively impacts the world. If you're curious, driven and inspired by the idea of doing important work with real-world impact, there's no better place to build your career. Find your place at Pace Join us as a Client Service Technician, where you'll put your love of science to work in the sample receiving department of our environmental testing laboratory. You'll receive all the training you need to successfully take on your new role and grow an exciting laboratory sciences career at Pace . What you'll do Coordinate and perform sample-related activities, including shipping and receiving, processing and administration Maintain and update appropriate documentation and databases Participate in training on fundamental lab support policies, programs, and practices What you'll bring High school diploma or equivalent Experience in a laboratory or environmental testing setting is preferred, but not required Ability to perform work in a lab or office setting, remain standing for long periods, work around strong smells, and wear personal protective equipment while handling samples (e.g., lab coat, safety glasses and gloves; all PPE provided by Pace ). What we promise Comprehensive benefit program, including medical, vision and dental insurance, 401(k) matching and tuition reimbursement Opportunities to build a rewarding career An inclusive culture that stands for integrity, innovation and growth

GC&E Federal is seeking an Outside Plant Cable Technician. The candidate for this position will work within our team to support our government Information Technology (IT) and Inside and Outside Plant program with our client. As an OSP Technician you will be an integral part in ensuring the successful operations and maintenance of the Telecommunications team at Fort Devens, MA. Primary Responsibilities and Essential Function Support the Customer Service Telephone [Customer Service Representative Installation and Repair (CSR/I&R)] and OSP services requests, trouble tickets, PMCS of maintenance holes, telephone poles, and pedestals, and all other requirements. Create, validate, and update the NIPRNET diagrams and number of cable pairs/strands on cable plant drawings for leased circuits and Government owned circuits (approximately 100 buildings). Plan and manage circuit installation and maintenance services for Army tenant activities. Physical Requirements Predominantly outdoors environment Must be able to sit, stand, walk, stoop, kneel and reach Must be able to speak, write, read, and understand English May require frequent computer use for several hours at a time Frequently work at fast pace with unscheduled interruptions Must have visual acuity Must be able to lift up-to 25 pounds Location: Fort Devens, MA- This is not a remote position. Local candidates only. Required work authorization: United States Job Type: Full-time Experience with the following: Fiber, Copper & Coax Termination & Testing I3A Standards EIA/TIA Standards CAT5e/6/7 Installation Experience Plant-in-Place Drawings Analog and VoIP Phone Systems MS Office Suite Remedy and TMS Candidate Requirements: SECRET Clearance BICSI Trained GC&E Federal, Inc. offers a competitive benefits package to include: paid holidays, paid time off, medical, dental, vision, flexible spending account, LTD & STD, company paid life insurance, 401(k) and tuition reimbursement. It is the policy of GC&E Federal, Inc. to provide equal opportunity in recruiting, hiring, training, and promoting individuals in all job categories without regard to race, color, religion, national origin, gender, age, disability, genetic information, veteran status, sexual orientation, gender identity, or any other protected class or category as may be defined by the federal, state, or local laws or regulations.

Job DescriptionGet paid to travel the USA and install industrial equipment. BayWorks specializes in the installation of industrial paint systems. Our main client is Global Finishing Solutions. As a field installer you would erect steel, bolt steel panels to structure, install equipment and HVAC/ducting, metal fabrication, etc.. This is a full-time traveling position with paid travel home for major holidays or planned vacations. Per Diem is provided while away from home.

Environmental Field-Testing Technician Info: Alliance Technical Group provides the full spectrum of services to support our customers' environmental needs, and ultimately, helps protect the environment. We are currently hiring enthusiastic, adventurous, science or mechanically minded individuals who have the desire to obtain valuable work experience and learn on the job. In this role, you will have the unique opportunity to gain exposure to a variety of industrial processes, and travel to various customer locations typically in your region/state, with all travel expenses paid. The work is conducted safely outdoors, on emissions source platforms, often at elevated heights, so you must love being outside. Generous quarterly profit-sharing bonuses and plenty of overtime available, In addition, you'll receive a great benefits package, paid time off, and the ability to receive referral bonuses. Duties & Responsibilities: In this important position, you will conduct Stack Emissions Testing including equipment preparation, deployment, staging/breakdown, sample collection and recovery. During our comprehensive training process, you will learn the following responsibilities, and once experienced, have the opportunity for rapid advancement: Conduct on-site field testing in a professional manner and transport testing equipment to customer sites Follow all test methods, procedures, and processes for quality source testing Apply careful mechanical and electrical skills while troubleshooting testing systems Qualifications: Ability to pass a comprehensive background check and drug screening Must have a valid driver's license Enjoy being outdoors, working safely in all weather conditions Ability and desire to climb stairs and ladders and work at elevated heights Degree in environmental, engineering, or mechanical sciences, or related experience skill and ability is highly preferred Experience related to environmental response/sample collection, mechanical, construction, or electrical work is helpful and preferred Experience with or strong aptitude to learn the use of the MS Office Suite (Word, Excel, Outlook) & Adobe products Ability and desire to be on your feet, lift equipment up to 75 pounds, climb ladders or stairs and work at elevated heights and use tools or equipment requiring a high degree of dexterity Ability to distinguish between shades of color is critical for safety Employee Benefits: Medical, Dental, and Vision Insurance Flexible Spending Accounts 401(K) Plan with Competitive Match Continuing Education and Tuition Assistance Employer-Sponsored Disability Benefits Life Insurance Employee Assistance Program (EAP) Paid Time Off (PTO), Paid Holidays, & Bonus Floating Holiday (if hired before July 1st) Profit Sharing or Individual Bonus Programs Referral Program Per Diem & Paid Travel Employee Discount Hub In compliance with applicable Pay Transparency laws, Alliance Technical Group provides a range of compensation for job postings within locations that have these requirements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. The pay range for this entry-level role is $23-$26 per hour. Alliance Technical Group is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, age, marital status, pregnancy, genetic information, or other legally protected status. #FIELDSERVICES

The Military Field Service Representative (FSR) located in Tolemaida, Colombia, will support the Colombian military in their operation, management, repair, installation, and maintenance of assigned GE equipment for starting up and operating a T700 engine depot. In this role, the FSR will act as a liaison between GE Aerospace and the customer. Candidates must be mobile to meet the needs of the customer, program and business. **Job Description** **Job Title** T700 Depot Military Field Service Representative - Tolemaida, Colombia **Company Intro/About GE Aerospace** GE Aerospace is a world-leading provider of jet engines, components, and integrated systems for commercial and military aircraft. We power flight safely and reliably for today, tomorrow, and the future, partnering closely with customers to deliver high-quality outcomes with speed and efficiency. **Site, Business, OR Functional Area Overview** This role supports the startup and sustained operation of a T700 engine depot in Tolemaida, Colombia, serving the Colombian military's helicopter fleet. The Field Service organization is focused on operational readiness, on-time delivery, and cost-effective maintenance solutions that meet contractual and mission requirements. **Role Overview** The Military Field Service Representative (FSR) will serve as GE Aerospace's on-site liaison to the Colombian military, supporting depot startup and ongoing repair, installation, troubleshooting, and maintenance activities for T700 turboshaft engines. The FSR will coordinate technical support, drive issue resolution, and enable customer success while meeting contractual, safety, and quality objectives. **Key Responsibilities** + Act as the single point of contact to the customer for timely resolution of depot-level tooling, maintenance, repair, and engine management concerns + Establish and maintain strong on-site relationships to provide ongoing technical and business support + Provide hands-on technical assistance leveraging in-depth knowledge of T700 installation, operation, and troubleshooting to keep the customer on schedule + Use disciplined analytical methods to drive root-cause analysis; create presentations and spreadsheets (including pivot tables and Pareto charts) to track issues and implement lasting corrective actions + Exercise sound judgment to propose solutions beyond set parameters for complex maintenance and troubleshooting scenarios, drawing on internal and external resources + Lead low-risk projects and serve as a resource for colleagues; explain technical concepts and build consensus across maintenance, engineering, and management stakeholders + Uphold and promote safety, quality, delivery, and cost objectives; ensure compliance with export control and security requirements **Required Qualifications** + Fluent in Spanish and English (reading, writing, and speaking) + Bachelor's degree from an accredited college or university; or a High School Diploma/GED plus a minimum of 4 years in a field service representative or jet engine maintenance role + Minimum 3 years of field maintenance, modification, and repair experience on T700 engines + Strong oral and written communication skills with demonstrated ability to analyze and resolve problems + Ability and willingness to travel as required + Ability and willingness to obtain and maintain a U.S. Government security clearance **Desired Characteristics** + 5+ years of hands-on turboshaft engine maintenance experience + T700 experience across depot, organizational, intermediate, and flight line troubleshooting levels + Strong customer interaction and communication skills; proven leadership abilities + Demonstrated proficiency in repair troubleshooting, shop operations, testing of jet engines, and support equipment tooling + Ability to make formal presentations to maintenance, engineering, and management at all levels + Project management experience; ability to lead and influence customers and peers + Experience mentoring and transferring technical knowledge; strong written and oral communication + Ability to work independently with technical guidance as needed + High degree of tact and diplomacy to collaborate effectively with customers at all levels + FAA Powerplant license (preferred) **Additional Information** The base pay range for this position is $100,000.00-133,000.00 USD Annual The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on January 23rd, 2026 GE Aerospace offers comprehensive benefits and programs to support your health and, along with programs like HealthAhead, your physical, emotional, financial and social wellbeing. Healthcare benefits include medical, dental, vision, and prescription drug coverage, access to a Health Coach from GE Aerospace; and the Employee Assistance Program, which provides 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Aerospace Retirement Savings Plan, a 401(k) savings plan with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits includ tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time -off for vacation or illness. GE Aerospace (General Electric Company or the Company) and its affiliates each sponsor certain employee benefit plans or prog rams (i.e., is a "Sponsor"). Each Sponsor reserves the right to terminate, amend, suspend, replace or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor's welfare benefit plan or program. This document does not create a contract of employment with any individual. © 2023 GE Aerospace and/or its affiliates. All rights reserved. Attorney-Client Privileged **Closing** At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government. Closing At GE Aerospace, we are committed to fostering an inclusive workplace that values diversity and empowers employees to thrive. This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents, or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherw _This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3))._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes \#LI-Remote - This is a remote position GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

About The Navys Advanced Electronics / Computer Field (AECF) offers extensive training in electronics, computer systems, radar, communications, and weapons fire control systems, including the Navys advanced missile systems and Aegis radar. These technicians are essential to the ships Combat Systems department, ensuring readiness for combat operations across the fleet. Responsibilities As an Electronics Technician (ET) or Fire Controlman (FC), you may: Maintain and repair radar, communication, and navigation equipment. Operate, maintain, and repair fire control radars, mainframe computers, large screen displays, LANs, weapon control consoles, and automatic gun systems. Troubleshoot and repair electro-mechanical systems used in weapons systems. Support combat systems readiness aboard aircraft carriers, Aegis cruisers, and other surface ships. Work Environment ETs and FCs serve on fleet units worldwide and at shore-based repair facilities. Expect assignments aboard ships, at remote stations, and in technical repair shops. Work is highly technical, requiring precision and teamwork. Training & Advancement Apprentice Technical Training Great Lakes, IL (11 weeks) FC Strand Great Lakes, IL (16 weeks) ET Strand Great Lakes, IL (22 weeks) Training covers electronics theory, radar systems, communications suites, missile and gun system ballistics, troubleshooting, and fiber optics. After A School, technicians may attend advanced C Schools. College credits are often available for Navy training. Education Opportunities Navy College Program & Tuition Assistance Post-9/11 GI Bill College credits via the American Council on Education Industry-recognized certifications through Navy COOL Department of Labor apprenticeships via USMAP Qualifications & Requirements U.S. citizen, eligible for security clearance Normal hearing and color perception Strong aptitude in math, computing, and electronics Ability to work as part of a team and perform detailed technical work Pay & Benefits Competitive salary Enlistment and re-enlistment bonuses Free health insurance & housing Retirement plan Paid training Required qualifications: 18 years or older Legally authorized to work in the United States RequiredPreferredJob Industries Government & Military

Job Description The Environmental Field Laborer (Field Tech) must be able to work in compliance on various remediation and industrial maintenance projects. They must adhere to and maintain strict compliance with corporate/office policies and procedures, established health and safety protocols, and all applicable local, state, and federal regulations. JOB RESPONSIBILITIES Execution of field work encompassed in remediation and industrial maintenance projects while under direct or indirect supervision. Correct completion of all job-specific, employee-related MER paper work including Timesheets, Daily Work Reports, Driver's Logs and Daily Tailgate Safety Meeting Forms. Understand and work within project's detailed scope-of-work to maintain strict compliance with contract documents, project schedules, and corporate policies and procedures. Work safely during all phases of performing the job duties required in the field. Ability to perform work inside areas of varying dimensions; involving squatting and crawling for possible extended periods. Ability to follow directions; read/speak and understand English; read and understand common danger placards / labels and hazardous warning literature including site safety plans. The ability to safely drive and perform safety checks on all vehicles for which licensed. Project work may require out of town travel for two weeks or more Must be able to understand and comply with company and client safety standards. Due to the diversity of both scheduled and non-scheduled projects, physical demands, and environmental conditions vary significantly depending on the project. Work outside year round in all types of weather. May work in environments that are extreme in nature like environmental conditions such as heat, cold, heights, hazardous chemicals, loud noises, dangerous equipment, long hours etc. May be exposed to varying levels of physical activities and physical extremes such as long periods of standing, walking, crouching, use of hands, and heavy lifting of up to 50 pounds or more. Must be clean shaven at all times to allow immediate donning and seal of respirator. QUALIFICATIONS Requires High School Diploma or GED (or equivalent reading, writing and reasoning skills). Experience in emergency response, manual labor, general construction and/or industrial cleaning is preferred. A valid driver's license is required. TWIC preferred. OSHA 40-HR HAZWOPER & Confined Space Entry certifications are desired but not required. Successful completion of a pre-employment background and substance screening process including, but not limited to, employment verifications, criminal search and Motor Vehicle Record (MVR) search as well continued verifications throughout employment to ensure that all records meet company policy standards. BENEFITS Competitive Salary Health, Dental and Vision Insurance 401k with Company Match Paid Time Off (PTO) Paid Holidays This is an hourly position; the hiring range for the Environmental Field Technician in Randolph, MA is: $22.00/hour - $25.00/hour The actual hourly rate offered will be determined based on multiple factors including but not limited to relevant skills and experience. Moran Environmental Recovery is an Equal Opportunity Employer.