Installation technician jobs in Allison Park, PA - 573 jobs

Summary The Field Service Technician performs a variety of tasks, including but not limited to, onsite bolting, heat treating and/or field machining. Completes any and all tasks assigned by the Field Supervisor to meet goals of increased efficiency, profitability, and customer satisfaction. Ideal candidates will have experience with construction or mechanical work and/or possess knowledge of plant maintenance and repair work. Qualification Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum Qualifications Experience in mechanical bolting, heat treating, or field machining preferred. Experience performing maintenance and turnaround services to refining, chemical, midstream, and power. High School Graduate or General Education Degree (GED) preferred. Possess a current TWIC card or have the ability to obtain one. Valid driver license with a clear driving record Demonstrated mechanical ability. Must be able travel a minimum of 75% of the time. Knowledge, Skills and Abilities Ability to pass a non-DOT medical exam, drug and alcohol test, respirator qualification test, and federal class background check. Ability to work at heights or in enclosed spaces. Accuracy - Ability to perform work accurately and thoroughly. Detail Oriented - Ability to pay attention to the details of a project or task. Safety Awareness - Ability to identify and correct conditions that affect employee safety. Working under pressure - ability to complete assigned tasks under stressful situations and adapt to changing assignments on short notice. Accountability - Ability to accept responsibility and account for his/her actions. Essential Functions Perform onsite bolting, heat treating or field machining work at customer locations. Troubleshoot onsite equipment and determine the proper methods fulfill customer's needs and specific applications. Operate a variety of tools for field work. Properly document and/or record work performed utilizing required internal and customer job-related forms/paperwork. Keep a clean and safe working environment and optimize space utilization. Communicate and cooperate with supervisors and coworkers. Meet and communicate with customers in a professional manner. Operate and preventively maintain company tools, equipment, and vehicles. Follow quality service standards and comply with procedures, rules, and regulations. Work in accordance with all safety regulations Other duties as assigned Physical Demands Must be able to stand and walk for much of the day. Ability to lift 5-25 pounds frequently and ability to lift up to 50 pounds occasionally. BE SURE TO APPLY ON OUR WEBSITE: ****************

The Department of Transportation is currently on the lookout for a skilled Medium Voltage Electrician to join our team. This dynamic role encompasses a diverse array of responsibilities, including the execution of preventive maintenance and repairs on various mechanical and electrical systems. The successful candidate will work with power supply and lighting systems, ensuring their optimal functionality, as well as maintaining fire alarm systems and traffic light controls. Additionally, the position involves the upkeep of carbon monoxide analyzing systems and tunnel ventilation fans, all of which are critical for public safety and efficient transportation operations. If you possess the necessary expertise and are eager to contribute to a vital sector, we encourage you to apply today! DESCRIPTION OF WORK In this position, it is essential to possess the personal hand tools typically required of a journeyman electrician. Your responsibilities will include the cleaning and lubrication of ventilation fan motors, bearings, dampers, and drive units, along with performing necessary mechanical repairs, adjustments, and parts replacements. You will be tasked with identifying and diagnosing faults in electrical circuitry and defective components by interpreting technical drawings and schematics, as well as utilizing various testing equipment. Additionally, you will repair, adjust, or replace any worn or malfunctioning components. Your work will encompass both low-voltage control circuits and industrial-grade high-voltage systems, specifically those operating between 480 volts and 23,000 volts. This includes servicing and cleaning tunnel light fixtures, which involves tasks such as re-lamping, ballast replacement, socket fixture repairs, rewiring, and overall fixture replacement. Furthermore, you will be responsible for the installation of electrical devices, fixtures, cables, and conduits, ensuring compliance with established standards and codes within the electrical trade, as well as servicing and maintaining detection and recording devices. Interested in learning more? Additional details regarding this position can be found in the position description. Work Schedule and Additional Information: Full-time employment Work hours are 6:00 AM to 2:00 PM, Monday - Friday, with a 30-minute lunch. This position may require rotating shift work due to 24/7 operations. Telework: You will not have the option to telework in this position. Salary: In some cases, the starting salary may be non-negotiable. You will receive further communication regarding this position via email. Check your email, including spam/junk folders, for these notices. REQUIRED EXPERIENCE, TRAINING & ELIGIBILITY QUALIFICATIONS Minimum Experience and Training Requirements: Five years of journey-level experience in the electrical trade; or An equivalent combination of experience and training. Conditions of Employment: This position requires possession of a valid Pennsylvania Driver's License. Additional Requirements: You must be able to perform essential job functions. How to Apply: Resumes, cover letters, and similar documents will not be reviewed, and the information contained therein will not be considered for the purposes of determining your eligibility for the position. Information to support your eligibility for the position must be provided on the application (i.e., relevant, detailed experience/education). If you are claiming education in your answers to the supplemental application questions, you must attach a copy of your college transcripts for your claim to be accepted toward meeting the minimum requirements. Unofficial transcripts are acceptable. Your application must be submitted by the posting closing date . Late applications and other required materials will not be accepted. Failure to comply with the above application requirements may eliminate you from consideration for this position. Veterans: Pennsylvania law (51 Pa. C.S. *7103) provides employment preference for qualified veterans for appointment to many state and local government jobs. To learn more about employment preferences for veterans, go to ************************************************ and click on Veterans. Telecommunications Relay Service (TRS): 711 (hearing and speech disabilities or other individuals). If you are contacted for an interview and need accommodations due to a disability, please discuss your request for accommodations with the interviewer in advance of your interview date. The Commonwealth is an equal employment opportunity employer and is committed to a diverse workforce. The Commonwealth values inclusion as we seek to recruit, develop, and retain the most qualified people to serve the citizens of Pennsylvania. The Commonwealth does not discriminate on the basis of race, color, religious creed, ancestry, union membership, age, gender, sexual orientation, gender identity or expression, national origin, AIDS or HIV status, disability, or any other categories protected by applicable federal or state law. All diverse candidates are encouraged to apply.

This position will be primarily based in the Altoona, PA area to include Johnstown, State College, Ebensburg, and Hollidayburg . Are you mechanically inclined and excited about establishing a growth-oriented career? Join Konica Minolta as aProduction Systems Technician to demonstrate your expertise in production print products and grow your skills in our wide breadth of technologically advanced products and services. We have opportunities for career growth in all areas of the company! Join us now and receive a$1,500sign-on bonus! At Konica Minolta, we partner with our clients to design the Future of Work by managing and enhancing their printing equipment capabilities, optimizing cloud data security and functionality, offering managed print, IT and automation services, and so much more! This is a great opportunity to learn new technologies while growing your career with an industry leader. Responsibilities What You'll Do: Perform maintenance and repairs on Konica Minolta production print products to include technical diagnostics, break/fix, installation, hardware removal and troubleshoot connectivity Responsible to use and maintain a variety of tools and gauges to repair and diagnose production machinery Ability to drive to customer sites within assigned territory, track inventory supply and keep customers informed on scheduling Represent Konica Minolta in a professional manner and develop trusted customer relationships while maintaining a high level of customer satisfaction Demonstrate progress in technical abilities, troubleshooting techniques and productivity Log service visits and document updates for each client account Collaborate with the Account Management team and other technicians as needed to help resolve customer issues and expand market share of products May be required to be available after hours on an on-call basis What We Offer: Hands on and computer-based training to further your knowledge on advanced technology products & services Exposure to IT networks and services with career growth opportunities Competitive car allowance program and paid mileage Company provided laptop and phone An inclusive and flexible workplace environment that highly values sharing of new perspectives. Comprehensive benefits package including paid holidays, vacation and sick time, medical/dental, 401k, employee assistance and tuition reimbursement programs. Qualifications Minimum Qualifications: 2+ years of experience servicing/repairing office equipment, production printers preferred High School Diploma/GED or equivalent experience Reliable transportation to drive to customer sites daily Exposure to IT Networks or A+ / N+ Certifications are a plus About Us Konica Minolta Business Solutions' (Konica Minolta) journey started more than 150 years ago, with a vision to see and do things differently. The company partners with clients to Give Shape to Ideas by supporting their digital transformation through its expansive Intelligent Connected Workplace portfolio. Its business technology offerings include IT Services, intelligent information management, video security solutions and managed print services, as well as office technology and industrial and commercial print solutions. 2025 marks Konica Minolta's 20th anniversary in production print, for which it celebrates "20 Years of Excellence, Innovation and Impact," and continues to lead the way in digital commercial printing. This year also commemorates 20 years of Konica Minolta's bizhub brand. Over the past two decades, the bizhub series has revolutionized office technology and redefined how businesses operate. It has continuously evolved to meet the needs of modern workplaces, fueled by advances in technology and a commitment to innovation. Konica Minolta is proud to be ranked on the Forbes 2025 America's Best Large Employers list, included on CRN's MSP 500 list numerous times; recognized as the #1 Brand for Customer Loyalty in the MFP Office Copier Market by Brand Keys for eighteen consecutive years and presented with Keypoint Intelligence's BLI 2025 and 2021 A3 Line of The Year and BLI 2021-2023 Most Color Consistent A3 Brand Awards for its bizhub One i-Series. For more information, please visit Konica Minolta online and follow it on Facebook, YouTube, LinkedIn and Twitter. Konica Minolta operates on a North American Shared Services model, which aligns cross-border priorities and enhances delivery to its field organization. This combines service functions in the U.S. and Canada, ultimately providing more resources to support areas such as sales administration, logistics and supply chain, marketing, product planning, finance, IT, HR and legal. Au sujet de Konica Minolta Solutions d'affaires Konica Minolta (Konica Minolta) a entame son parcours il y a plus de 150 ans, avec la volonte de voir et de faire les choses autrement. Elle fait equipe avec ses clients pour donner forme a leurs idees en appuyant leur transformation numerique grace a un riche portefeuille de solutions pour un milieu de travail connecte et fute. Parmi ses technologies d'affaires, on retrouve des services de TI, la gestion intelligente de l'information, des solutions de securite video et des services d'impression geres ainsi que des technologies de bureau et des solutions d'impression industrielle et commerciale. L'annee 2025 marque le 20e anniversaire de l'entree de Konica Minolta dans le marche de l'impression de production; l'entreprise souligne 20 annees d'excellence, d'innovation et de resultats tout en continuant d'etre une figure de proue dans l'impression numerique commerciale. C'est aussi l'annee ou la marque bizhub de Konica Minolta celebre ses 20 ans, au cours desquels la gamme a revolutionne la technologie de bureau, redefini les processus des entreprises, et evolue continuellement pour repondre aux besoins des milieux de travail modernes, mue par les avancees technologiques et la volonte d'innover. Konica Minolta est fiere de faire partie du palmares 2025 des meilleurs grands employeurs d'Amerique de Forbes, d'avoir figure a plusieurs reprises au palmares CRN des 500 fournisseurs de services geres, d'avoir ete nommee la marque numero un en matiere de fidelite des clients sur le marche des appareils de bureau multifonctions par Brand Keys pendant 18 annees consecutives, et de s'etre vue decerner les prix BLI A3 Line of the Year 2021 et 2025 et Most Colour Consistent A3 Brand 2021-2023 de Keypoint Intelligence pour sa gamme bizhub One i-Series. Pour en savoir plus, rendez-vous sur le site de Konica Minolta et suivez l'entreprise sur Facebook, YouTube, LinkedIn et Twitter. Konica Minolta fonctionne selon un modele de services partages nord-americain qui permet d'harmoniser les priorites transfrontalieres et d'ameliorer la prestation de services aux organisations operationnelles. Le modele combine des fonctions de service americaine et canadienne afin d'offrir davantage de ressources aux services de soutien comme l'administration des ventes, la logistique et la chaine d'approvisionnement, le marketing, la planification des produits, la finance, les TI, les RH et les services juridiques. EOE Statement Konica Minolta is an equal opportunity and affirmative action employer. We consider all qualified applicants for employment without regard to race, color, religion, creed, national origin, sex, pregnancy, age, sexual orientation, transgender status, gender identity, disability, alienage or citizenship status, marital status or partnership status, genetic information, veteran status or any other characteristic protected under applicable law. Konica Minolta Business Solutions (Canada) Ltd. is an equal opportunity employer. Solutions d'affaires Konica Minolta (Canada) Ltee. est un employeur d'opportunite egale.

Topline Heating & Air is seeking an eager and enthusiastic entry-level Residential HVAC Install Helper.The essential function of our Residential HVAC Install Helper is to assist the Lead installer on the job. Come be a part of our 5 star family oriented atmosphere and start your HVAC career on the right track! What we offer: Medical Benefits available the first of the month 401k Paid vacation Uniforms Continuing Training & Education Growth opportunities High Energy Team Culture Responsibilities: Assist Lead Installer in carrying out full HVAC installation skills such as: equipment removal and installation of new, duct repair and/or replacement (fiberglass, flex, and metal), soldering, venting flues, refrigerant leak detection, and charging, recovering and reclaiming refrigerant, measuring refrigeration system parameters (gas pressures and temperatures, etc.), calculating static and CFM delivery, carrying out basic plumbing and electrical skills. Load trucks with materials, tools, and equipment as instructed by Lead Installer. Learn proper install methods from Install Lead. Nice to Haves: High school diploma or GED. Valid DL EPA Certification Demonstrate the mental aptitude and physical ability required to do the job. Excellent communication & customer service skills. Ability to climb in attics, under houses and in box trucks in extreme temperatures Job Type: Full-time Pay: $17-$20 an hour Schedule: Monday to Friday We are an equal opportunity employer! Please submit your email for consideration and to set up a time to talk about your new career! Check out our website at ******************

Job Description Mad City Windows & Baths, a Renuity Company Kitchen Installer Earn up to $80,000/yr Sign On Bonus: Up to $500 Mad City Windows & Baths, a proud company of the Renuity family, where innovation and excellence drive everything we do. As part of a powerful network of seven of the most trusted home renovation companies in America, we are on a mission to revolutionize home improvement-making it faster, easier, and stress-free. We are helping homeowners create spaces they love, without the hassle. With expert teams across 36 states and growing, there's likely a Renuity home in your neighborhood. We value fresh perspectives and welcome candidates from all backgrounds to bring their unique experiences and ideas to our team. And we're just getting started! What We Offer Base hourly pay ($20/hr) M-F schedule Comprehensive benefits including medical, dental, and vision Enjoy team collaboration and role advancement About the Role In this position, you will: Install home remodeling products according to Mad City's standards and procedures Apply finish work as needed for every construction application Communicate with management at the end of an installation to ensure customer satisfaction and authorize final payments Complete carpentry job checklist with homeowner at completion Key Qualifications 6+ months of Remodeling, carpentry or construction experience Experience with kitchen cabinet installation and/or refacing Must have a valid driver's license and good driving record Great communication and customer service skills with the ability to clearly communicate with homeowners and team members About Renuity Renuity, headquartered in Charlotte, NC, is a leading home improvement services business with a rapidly expanding national footprint. Renuity currently operates across 36 states and has created hundreds of thousands of happier homeowners across the United States who have chosen Renuity for their home improvement needs. Renuity is redefining the home improvement experience with a focus on trust, innovation and customer-first service. To learn more, visit Renuity's About Us page. Renuity and its affiliates are committed to equal opportunity. We value and embrace diversity and inclusion of all Team Members. If you have a disability under the Americans with Disabilities Act or similar law, and you need an accommodation during the application process or to perform these job requirements, or if you need a religious accommodation, please contact ******************************. If you have a question regarding your application, please contact ****************** To access Renuity's Privacy Policy, please click here: Privacy Policy

Job DescriptionDescription: ASCC, Inc. an Information Technologies System Integrator is seeking individuals for Structured Cabling Systems Installation positions. People assigned to this position travel to various customer locations installing Data, Voice and Video cabling, performing terminations, testing and troubleshooting cabling in support of information technologies systems. This position is considered an entry position with our Physical Plant Integration Group. As a core discipline it requires people with skill sets in construction who are familiar with and proficient with hand tools and power tools. This is an opportunity to learn and gain experience at the fundamental level of integrating Structured Cabling Systems (SCS). Training is provided and advancement is available for those who chose to pursue a career path in this field. A full benefits package is offered to our regular full-time employees. ASCC is a drug free workplace. Requirements: Qualified candidates must: · Have a valid drivers' license and a safe driving record · Have the ability to lift 50 pounds · Have the ability to climb ladders · Have the ability to work at heights that could exceed 40 feet · Be willing and able to travel to customer sites away from the Pittsburgh area for a four to five days at a time · Have a background and aptitude in construction or field related work. · Must be able to pass Act 34 and Act 151 PA Background checks · Ability to distinguish the full spectrum of colors in order to work with color coded wiring · Must be willing to work in tobacco free environments · Must be able to work independently · Must be able to communicate with customers and project managers · Must be capable of working with a team or self motivated to work alone

Qualifications of a successful candidate must include: • Intermediate (3-6 years) experience with the Avaya Aura software, specifically Communications Manager (CM) and Session Manager (SM); • Avaya Certifications (not required, but is a plus); • Experience with Avaya Call Center (not required, but is a plus). Qualifications Responsibilities of the IT Resource shall include but are not limited to the following: • Telephone Move, Add, Change work; • Troubleshoot and resolve issues with telephones; • Deploy advanced features as needed; • Facilitate call center adds and changes; • Facilitate department moves; • ACD Changes cabling oversight for moves; • Network port activations as needed; • Train other team members. Additional Information Share the Profiles to mahesh(@)techtammina(dot)com Contact: ************ Job Type: C2C/1099 Status: USC/GC/H1B Keep the subject line with Job Title and Location

Join the world's largest HVAC company, named by Forbes as one of America's Best-In-State Employers 2025! Make your mark at the world's largest HVAC company! The Controls Technician III position for Building Automation Systems (BAS) is critical to our success in ensuring our customers receive top-notch service as it relates to the installation, programming, and service of commercial digital control systems while maintaining quality and profitability. We are a company that invests in our people, as you continue to learn in your role you will have opportunities to get exposure to more complex tasks and assignments! Location: Pittsburgh, PA - Onsite The Controls Technician III will provide technician support for Building Automation Systems (BAS), service contracts, system upgrades, and controls related service requests. Provide responsive and professional customer service with the goal of building and maintaining long-term customer relationships. Identify, analyze, diagnose, and troubleshoot direct digital control systems. Perform preventative maintenance, commissioning, and replacement modifications as needed or requested by customers. Maintain building automation systems by inspecting trend logs, reports, schedules, applications, hardware, and programming. Provide controls technical support to HVAC technicians. Create and/or implement programming and graphics for new installations and retrofit projects. Commission controls installations and verify that control sequences meet scope, design, or specifications. Provide training and follow-ups for Customers and operations personnel. Complete work orders and review with customers for accuracy. Continually look for ways to improve our processes and ability to serve our customers effectively. What's in it for you: Factory Certified Training, Online Training Courses, or other professional on the job training in the HVAC Industry The opportunity to work on all types of commercial equipment and cutting-edge technologies such as Intelligent Equipment, Magnetic Bearing Technology, and VRF Technology Daikin Applied provides technicians with company vehicle, laptops, mobile devices, and other technologies The ability to make an impact and shape your career with a company that is passionate about growth The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best The opportunity to work for a leading innovator in HVAC and make a difference in environmental initiatives to create a more sustainable world for all Minimum Qualifications: High School Diploma or GED. 5+ years related experience. Valid driver's license with acceptable driving record. Ability to lift 50lbs with or without an accommodation. Required license(s) and/or training card as required by local law district. Preferred Qualifications: Previous experience in mentoring less experienced technicians. OSHA 10 or OSHA 30 Certification Current first aid / CPR card. Proficiency with test instruments and calibration tools. Competency in operation of engineering/commissioning tools, DDC controllers and field devices, BACnet protocol fundamentals. Competency in the operation of HVAC equipment and controls. Ability to understand written sequences of operation. Ability to read low voltage wiring diagrams and controls flow diagrams. Niagara AX and/or Niagara 4 certification. Experience with any common integration protocols such as: BACnet MST / IP, LON, Modbus TCP / RTU, Ethernet OIP, MQTT, or SQL. Strong computer skills, including computer networking fundamentals. Good verbal and written communication skills. Customer-focused, results-oriented professional, and strong team player. Motivated self-starter that demonstrates initiative. Ability to manage multiple priorities and stay organized. Benefits: Daikin Applied offers the following benefits for this position, subject to applicable eligibility requirements Multiple Medical insurance plan options + Dental and Vision insurance 401K retirement plan with employer contributions matching 100% of the first 3% an employee contributes and 50% on the next 2% of employee contributions Company provided life insurance + optional employee paid voluntary life insurance, dependent life coverage and voluntary accident coverage Short term and long-term disability 120 hours (3 weeks) Paid Time Off for new employees + 11 company paid holidays 40 hours (1 week) Sick Time The typical hourly pay rate for this position ranges from $35.40 - $53.30 in PA. The range displayed represents the pay range for all positions in the job grade which this position falls. Individual base pay will depend on a wide range of factors including your skills, qualifications, experience, and location. If you're looking for an engaging career with growth opportunities in a supportive environment, you'll love a career at Daikin Applied!

Opportunity As a trusted federal contractor, IMG delivers mission-focused solutions that support government customers and the people who serve them. We are currently hiring a Network Cable Technician who will support our team at Bettis Atomic Power Laboratory with installing, maintaining, and troubleshooting network cabling infrastructure, including both copper and fiber optic systems. They may also support cable pulling, terminations, testing, and documenting cable runs for the Naval Nuclear Laboratory mission. Key Responsibilities Install equipment enclosures, patch panels, and equipment (network - LAN/SAN, server, storage, UPS, etc.) as directed Install grounding cables for equipment enclosures, equipment, and cable tray Install cable tray/raised floor cable tray and cable tray accessories Install intra-building backbone cabling Install cable trays, J Hooks, and cable tray accessories Install horizontal cable Install work area outlets, faceplates, jacks, and patch cables Remove kick-plates and pedestals on cubicles to install network cabling Terminate Category 3, 5e, 6, and 6a UTP cable on patch panels and modular plugs Terminate 62.5-micron multimode fiber, 50-micron multimode fiber, and single mode fiber using ST, SC, and LC connectors using the anaerobic adhesive system and Corning UniCam system Diagnose and correct copper cable and fiber optic cable problems Replace failed equipment and install new equipment as directed Complete network trouble tickets as directed, document test results as needed Key Responsibilities Installation Install equipment enclosures, patch panels, and equipment (e.g., LAN/SAN, servers, storage, UPS) as directed Install grounding cables for equipment enclosures, equipment, and cable trays Install cable trays, J-hooks, raised floor cable trays, and related accessories Install intra-building backbone cabling Install horizontal cabling Install work area outlets, faceplates, jacks, and patch cables Remove kick-plates and pedestals on cubicles to install network cabling Organize, form, and dress cables Termination Terminate Category 3, 5e, 6, and 6a UTP cables on patch panels and modular plugs Terminate 62.5-micron multimode, 50-micron multimode, and single-mode fiber using ST, SC, and LC connectors (anaerobic adhesive system or Corning UniCam system) Troubleshooting & Maintenance Diagnose and correct copper and fiber optic cable issues Replace failed equipment and install new equipment as directed Complete work orders and network trouble tickets Groom network enclosures and equipment as directed Inventory material as directed Documentation & Testing Perform certification testing of UTP cables (Category 3, 5e, 6, and 6a), fiber (multimode and single-mode), and coaxial cables Document test results as required Label and document network equipment, cable paths, rooms, and cabinets Maintain configuration/control records for copper and fiber patch panels and cable locations Qualifications 5+ years' experience in cabling or network technician work Qualified to install, terminate, and conduct certification testing of Category 3, 5e, 6, and 6a unshielded twisted pair (UTP) cable, multimode and single-mode fiber cable Knowledge in the application of the following structured cable standards and codes: ANSI/TIA/EIA 568-B ANSI/TIA/EIA 569 ANSI/TIA/EIA 606 ANSI/TIA/EIA 607 NFPA 70 Proficient with Fluke DSX-8000 copper/fiber tester Proficient with Fluke OFP-100-QI OptiFiber Pro Optical Time Domain Reflectometer Writing and speaking clearly and concisely about technical topics Active Secret or L security clearance Preferred Qualifications Active Top Secret or Q security clearance About IMG Founded in 1987, IMG is a leading small business that exemplifies competence, integrity and follow-through. We consistently provide customer focused professional services, which ensures our company is recognized for continually exceeding expectations. We believe that at the core of our success stand our people. Our people have provided professional services in the Information Technology field for our customers with a commitment to customer satisfaction for over 35 years. IMG Benefits: Health, dental, vision, and life insurance Short term and long term disability insurance 401(k) with generous company match Health Savings Accounts (HSA) Personal leave plus paid federal holidays Professional development and training assistance IMG is an equal opportunity employer including disability and protected veterans or other characteristics protected by law.

Appliance and Repair Technician Why an Appliance Repair Technician career might be right for you: You like solving problems - Each repair is different. You enjoy diagnosing problems and figuring out solutions You like fixing things - Getting things working again is a satisfying outcome. You did that! You like helping others - You're the hero of the home, fixing essential appliances and lifting that weight off the shoulders of grateful homeowners You like to be on the move - You're on the road and welcomed into customers' homes every day Why a career with Sears Home Services is right for you: Great hourly rates - $18 - $30 / hourly base rate, depending on experience, certification and location Benefits - Comprehensive set of medical, dental, and vision benefits with an additional employer-paid health care subsidy for any dependent tier medical plan enrollment under the Transform Health and Welfare Plan. Specifically, each eligible employee may receive up to $4,000 annually towards the cost of your dependent tier health coverage each year, prorated throughout the plan year. 401k match - Opportunity to contribute to 401k plan, with an employer match calculated on your before-tax contributions, 100% on the first 3% of salary More ways to earn -Technicians have the opportunity to earn additional performance bonuses & sales incentives throughout the year. Year-round work - With Sears large scale and wide product range, Sears cross trains techs and keeps them busy year round Expert training - Best in class training program. Tens of thousands of repair techs have been trained by Sears Technical Institute in the past 60 years. Peer mentoring - Onboarding buddy and mentor technicians to help you grow your skills. Career advancement - Many ways to advance and cross-train to keep growing your career. Our average tenure is >12 years! Tools Provided - Sears provides company vehicle, uniforms, specialty tools, mobile phone & industry-leading app that eliminates paperwork and provides technical support. Job responsibilities: Drive to multiple customer's homes daily to diagnose and repair a variety of home appliances with high levels of quality and efficiency; appliances may include refrigerators, washers, dryers, dishwashers, and microwaves Deliver excellent customer experience that exceeds expectations consistently Provide customers with value-added solutions that help make their home more clean, comfortable & protected Keep company truck well-maintained & organized, and help manage parts efficiently Performs other duties as assigned Requirements: High school diploma or general education degree Mechanical knowledge and aptitude, including use of testing & repair tools Experience repairing and diagnosing a variety of home appliances preferred Can follow directions and processes for quality workmanship Can use smartphone, including use for part ordering Successfully pass a background & drug screen Valid driver's license for the state(s) in which you work Ability to travel up to 100% Ability to work variable and flexible hours, including required overtime Ability to read, understand, and apply written text of a technical nature to answer questions, solve problems, and complete job tasks Excellent communication skills, both verbal and written; Ability to read, write, and speak English Ability to constantly lift, carry, push, or pull up to 20 lbs (frequently lift, carry, push, or pull 50 lbs; occasionally lift, carry, push, or pull 100 lbs) Ability to constantly reach outward, handle and finger objects, stand, walk, sit and type using a keyboard Ability to frequently bend, squat, kneel, twist, turn, stoop, climb, and crawl Ability to occasionally reach above shoulder Ability to drive automatic transmission vehicle

Job DescriptionBenefits: Flexible schedule Independent Contractor Locksmith Commercial/Retail A&D Lock and Key is looking for an experienced locksmith contractor for commercial and retail service calls. Requirements: Must have own tools & transportation Strong experience with commercial locks, door hardware, exit devices Reliable, professional, able to work independently Work: Commercial service calls (rekeys, lock installs/repairs, hardware) Flexible schedule, paid per job REQUIRED: At Least 1-2 years of locksmith experience. Great opportunity to partner with a growing

Job Description HVAC and Commercial Refrigeration Technician, Commercial Kitchen Equipment Maintenance Technician Benefits Include: On demand training and full trouble shooting support. Company sponsored and manufacturer's training Company uniforms, phone, vehicle, and gas card Medical, vision, and dental insurance and short-term disability plans Company paid long term disability and life insurance Paid time off and paid holidays 401(k) retirement savings plan with Company match and immediate vesting AIS Commercial Parts and Service is a full-service commercial kitchen equipment repair company. We provide complete foodservice equipment maintenance and repair services for restaurants, QSRs, convenience stores, retailers, coffee shops, and concessions operations, specializing in commercial cooking, refrigeration, and HVAC equipment. We are a nationwide company, headquartered in Greenville, SC with local branches located coast to coast. The Commercial HVAC and Refrigeration Technician is responsible for operating a company vehicle to and from customer sites to troubleshoot, maintain and repair commercial HVAC and refrigeration equipment. To be a successful Commercial HVAC/R Technician, you should be able to work independently, possess strong technical and troubleshooting skills and be an expert in customer service. Responsibilities: Troubleshoots and repairs commercial HVAC and refrigeration equipment Inspects the commercial HVAC and refrigeration equipment and their related components to ensure safe operation. Communicates with customer and branch staff regarding status of repairs to ensure schedule is maintained and delays are properly communicated with customers. Completes service tickets according to procedures. Tracks truck stock to ensure needed parts are stocked on vehicle. Sustains service vehicle, tools, and uniforms to Tech24 standards. Sets a positive example for less experienced and/or new technicians by being a Company advocate. Follows all company policies and procedures, particularly regarding safety. Qualifications: Valid driver's license and acceptable driving record 3-5 years of related experience. Superb customer service skills Dependable and able to work independently Standard computer skills Own industry's standard hand tools Ability to climb ladders, work from heights, and crawl in tight quarters Ability to travel extensively within the region Ability to work some nights, weekend, and holidays for on-call rotation with your department (frequency varies with department size) Mechanically inclined with a hunger to learn new techniques and approaches Previous experience as a commercial HVAC and Refrigeration technician required Universal EPA certification is highly preferred. AIS is an Equal Opportunity Employer - M/F/Veteran/Disability/Sexual Orientation/Gender Identity For more information about AIS and Tech24 career opportunities visit ****************

Job DescriptionBenefits: Company car Competitive salary Health insurance Paid time off Training & development Benefits/Perks Flexible Scheduling Competitive Compensation Career Advancement Opportunities Job Summary: We are looking for a skilled and experienced HVAC Technician to join our team! In this role, you will install, service, or repair heating and air conditioning systems in residences or commercial establishments. You have past experience in an HVAC service technician role and hold an EPA certification. A team player who is comfortable working independently, you love the feeling of a job well done and take pride in completing customer jobs with efficiency. A positive attitude is a must! Responsibilities: Repair or service heating, ventilating, and air conditioning (HVAC) systems to improve efficiency, such as by changing filters, cleaning ducts, or refilling non-toxic refrigerants Establish customer rapport to ensure the highest levels of satisfaction Test pipe or tubing joints or connections for leaks, using a pressure gauge or soap-and-water solution Test electrical circuits or components for continuity, using electrical test equipment Repair or replace defective equipment, components, or wiring Qualifications: Past experience as an HVAC service technician or comparable education Valid Drivers License EPA Certification Experience with operation and maintenance of chillers, heat pumps, air handlers, and geothermal systems Ability to climb ladders, crawl, and lift 40 pounds

Job DescriptionSalary: Role and Responsibilities Installs, repairs, and inspects smoke and fire detection systems; inspects tests, and repairs fire alarm wiring, fire alarm panels and peripheral equipment. Install cabling and electrical wiring. Install access control systems and related equipment Identifies hazards, defects, and the need for adjustment or repair. Inspects, repairs or replaces smoke/heat detectors and tests fire alarm systems using appropriate diagnostic programs and equipment. Ensures that work is in accordance with relevant codes. Performs other general jobs as required including installations and cabling. Travel to jobsite locations to complete work and install. Qualifications and Education Requirements High school diploma or equivalent required 3+ years of electrical expierence in a construction environment NICET II certification with five (5) years verifiable experience preferred Journeyman license and completion of a accredited apprenticeship preferred. Preferred Skills Knowledge of materials, methods, and the tools involved in installation, maintenance, and repair of fire and smoke detection systems and equipment. Knowledge of applicable building codes, regulations, or ordinances. Ability to operate drills, conduit benders, drill presses, cable pullers, meters (volt, OHM, AMP, Meg), hand drills, hand tools and power tools. Ability to work in safe and efficient manner. Ability to read blueprints and schematics. Ability to use diagnostic program and other applicable diagnostic software and equipment. Ability to perform smoke detector sensitivity procedure. Ability to perform routine maintenance on equipment and determine when and what kind of maintenance is needed. Ability to work in safe and efficient manner. Work Environment This job operates in an office and field environment. The field environment will be on construction sites or inside existing buildings. Working conditions can change dramatically from one job to another. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. Other work tasks will require: Ability to work flexible hours including weekends to meet customer requirements. Travel to job sites and customer locations within assigned regions. Overnight travel may be required. Physical Demands This is largely an active role. Performing physical activities that require considerable use of your arms and legs and moving your whole body, such as climbing, lifting, balancing, walking, stooping, and handling of materials; Requires repetitive movement; climbing ladders, scaffolds, or poles; standing, walking and running; using hands to handle, control, or feel objects, tools or controls; and bending or twisting. Some specific demands may include: Capable of performing physical labor to include carrying and moving equipment and tools up to 50-70 lbs. Able to work in unusual and sometimes difficult position such as climbing ladders, scaffolding and high lift equipment up to 40 feet, working within ducts, crawl spaces, above ceilings, etc Additional Notes Hours: Monday-Friday 7:00am 3:30pm; Early arrival and/or overtime may be necessary. Arrow Electric Inc. is an equal opportunity employer. All aspects of employment including the decision to hire, promote, discipline, or discharge, will be based on merit, competence, performance, and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, pregnancy, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.

Job Description If you're an experienced HVAC Installation Technician with a drive for excellence and a commitment to customer satisfaction, Macioce's Heating & Cooling wants to hear from you! We're a well-established company in Bethel Park, PA, known for delivering top-notch HVAC services. Join our team of professionals and embark on a fulfilling career with endless opportunities for growth and success. Have we caught your attention? If so, you'll be happy to know that this heating and cooling position can be either full-time or part-time. A typical full-time schedule is 8 am - 4 or 5 pm, Monday - Friday. Some weekend work might occasionally be necessary. There is also the potential to earn extra by working overtime. If this sounds like the right opportunity for you, join our team as a full- or part-time HVAC Installation Technician! PAY & BENEFITS FOR AN HVAC INSTALLATION TECHNICIAN This full- or part-time heating and cooling position earns a competitive wage of $15 - $30/hour, depending on experience, and great benefits, including a 401(k), paid time off (PTO), a flexible schedule, and opportunities for overtime. THE TYPE OF HVAC INSTALLATION TECHNICIAN WE'RE LOOKING FOR We're searching for someone who can remove old equipment, install new equipment, and perform wiring. We also need someone who can meet these qualifications: Basic HVAC knowledge Driver's license Employees must reside in the area or be willing to commute (Bethel Park, PA) Possessing these traits would also be ideal: Problem solver - has a keen ability to figure things out Great time manager - prioritizes tasks and lets nothing slip through the cracks Team player - works well with others Customer service rockstar - thrives on providing excellent customer service Excellent communicator - can clearly explain technical information Does this sound like you? Great! We want you on our team! MACIOCE'S HEATING & COOLING: ABOUT US We are a family-owned HVAC company with a long-standing history of service in our community. Our technicians are trained and certified to undertake all HVAC-related issues, including installation, replacement, and everything in between. Whether our customers are looking for assistance with residential or commercial heating and cooling systems, we are happy to help. PERKS OF BECOMING PART OF OUR FAMILY As a family-owned business, we value our employees and strive to show our appreciation in various ways. Our team enjoys flexible scheduling and ample room to grow in their careers. We also offer solid benefits and a supportive company culture that make our thriving business a great place to work! So, what do you think? Are you ready to apply for this full- or part-time heating and cooling position? We make it easy with our quick and easy initial application. Try it out today! Location: 15102

Chatham University welcomes your interest in employment opportunities and encourages you to review open positions. Please note that Chatham does not accept unsolicited applications. Apprentice HVAC Mechanic Chatham University welcomes applications for the position of Apprentice HVAC Technician in our Facilities Management Department. Under the supervision of the Senior Director of Facilities Management, the Apprentice HVAC Technician assists the HVAC Mechanic with the operation, maintenance, and servicing of heating, ventilation, and air conditioning (HVAC) systems. This includes chillers, direct exchange systems, boilers, steam or hot water generating and distribution equipment, furnaces, air handlers, unit ventilators, and related components across all campus buildings. The Apprentice also helps maintain and service associated pumps, valves, and piping. Duties and Responsibilities: Required to attend classroom training held by the International Union of Operating Engineers Local 95. Follow instructions of the HVAC technician and assists in their duties. Under the supervision of the HVAC technician, perform routine tasks such as clean or change filters, lubricate parts, tighten fittings, etc. An incumbent in this class may be required on an occasional basis and according to need to perform duties assisting other trades areas. Qualifications: High school diploma or GED equivalent. Experience in the HVAC trade or vocational training in a mechanical trade. Ability to read blueprints, wiring diagrams. Knowledgeable of the use of tools, equipment and materials of applicable trades. Must possess a valid Pennsylvania driver's license. Must be able to attend classroom training held by the International Union of Operating Engineers Local 95. How to Apply: Applications accepted only via Chatham Careers and follow the instructions to complete the application process. To ensure full consideration, please include: Cover Letter outlining your qualifications for the position Curriculum Vitae or Resume Contact information for three professional references All application materials should be uploaded at the same time at the time of application. The system will not allow applicants to make edits to their applications after submission Chatham University strives to promote a campus environment that understands and embraces multiculturalism while increasing individuals' intercultural competence. We actively work to build and sustain a diverse and culturally vibrant campus, which promotes employee and student success and retention. Chatham University is an Equal Opportunity Employer with a strong commitment to diversity, inclusion, and equity. Chatham University does not discriminate on the basis of race, creed, color, religion, gender, gender identity, gender expression, sex (including pregnancy, childbirth, reproductive health decisions, or related medical conditions), sexual orientation, age, national origin, age, disability, genetic information, veteran status, marital or family status, political affiliation, or any other characteristic protected by applicable law.

Taurus Industrial Group's Specialty Services division is seeking skilled and motivated Field Services Technicians to join our growing team. We provide advanced industrial solutions across power generation, petrochemical, refining, and manufacturing sectors. Our technicians are trusted partners to our clients, delivering precision work in bolting, torquing, machining, induction heating, line-stop, and related specialty field services. If you are a hands-on professional with technical acumen, a safety-first mindset, and the ability to thrive in challenging field environments, we want to hear from you. Key Responsibilities Perform on-site bolting, torquing, tensioning, and induction heating services on critical equipment. Support field machining, hot tapping, and line-stop operations as needed. Install, operate, troubleshoot, and maintain specialized tools and OEM induction equipment. Ensure all work adheres to safety, quality, and compliance standards. Interpret technical drawings, job packages, and client specifications. Collaborate with project managers, supervisors, and customer representatives to ensure timely, accurate, and efficient service delivery. Maintain, calibrate, and prepare rental and company-owned specialty equipment. Travel extensively to client facilities across regional and national assignments. Recommended Qualifications & Requirements Experience: Minimum 3-5 years in industrial services, mechanical maintenance, or specialty field service roles (power plants, refineries, petrochemical, or heavy industry preferred). Certifications/Training: NCCER, OSHA, or equivalent field qualifications (preferred). OEM training on induction heating or bolting/tensioning equipment (a plus). Technical Skills: Proficient in hydraulic, pneumatic, and electronic tool operation. Familiarity with torque/tension charts, machining tolerances, and mechanical fit-up. Physical Requirements: Ability to lift to 50 lbs, work at heights, and endure confined space conditions. Willingness to work extended shifts, nights, weekends, and travel on short notice. Soft Skills: Strong commitment to safety and quality. Clear communication and problem-solving skills. Team-oriented with the ability to adapt to dynamic field environments. Why Join Taurus Industrial Group? Competitive pay with overtime opportunities. Comprehensive benefits: health, dental, vision, 401(k), PTO. Professional training and advancement opportunities. Exposure to cutting-edge specialty service technologies and OEM equipment. Be part of a growing, innovative company that values technical excellence and field expertise. 📍 Locations: Nationwide travel, with primary needs in Texas, Gulf Coast, Northeast, Midwest, and Western U.S. BE SURE TO APPLY ON OUR WEBSITE: ****************

Mad City Windows & Baths, a Renuity Company Kitchen Installer Earn up to $80,000/yr Sign On Bonus: Up to $500 Mad City Windows & Baths, a proud company of the Renuity family, where innovation and excellence drive everything we do. As part of a powerful network of seven of the most trusted home renovation companies in America, we are on a mission to revolutionize home improvement-making it faster, easier, and stress-free. We are helping homeowners create spaces they love, without the hassle. With expert teams across 36 states and growing, there's likely a Renuity home in your neighborhood. We value fresh perspectives and welcome candidates from all backgrounds to bring their unique experiences and ideas to our team. And we're just getting started! What We Offer Base hourly pay ($20/hr) M-F schedule Comprehensive benefits including medical, dental, and vision Enjoy team collaboration and role advancement About the Role In this position, you will: Install home remodeling products according to Mad City's standards and procedures Apply finish work as needed for every construction application Communicate with management at the end of an installation to ensure customer satisfaction and authorize final payments Complete carpentry job checklist with homeowner at completion Key Qualifications 6+ months of Remodeling, carpentry or construction experience Experience with kitchen cabinet installation and/or refacing Must have a valid driver's license and good driving record Great communication and customer service skills with the ability to clearly communicate with homeowners and team members About Renuity Renuity, headquartered in Charlotte, NC, is a leading home improvement services business with a rapidly expanding national footprint. Renuity currently operates across 36 states and has created hundreds of thousands of happier homeowners across the United States who have chosen Renuity for their home improvement needs. Renuity is redefining the home improvement experience with a focus on trust, innovation and customer-first service. To learn more, visit Renuity's About Us page. Renuity and its affiliates are committed to equal opportunity. We value and embrace diversity and inclusion of all Team Members. If you have a disability under the Americans with Disabilities Act or similar law, and you need an accommodation during the application process or to perform these job requirements, or if you need a religious accommodation, please contact ******************************. If you have a question regarding your application, please contact ****************** To access Renuity's Privacy Policy, please click here: Privacy Policy

Topline Heating & Air is seeking an eager and enthusiastic entry-level Residential HVAC Install Helper.The essential function of our Residential HVAC Install Helper is to assist the Lead installer on the job. Come be a part of our 5 star family oriented atmosphere and start your HVAC career on the right track! What we offer: Medical Benefits available the first of the month 401k Paid vacation Uniforms Continuing Training & Education Growth opportunities High Energy Team Culture Responsibilities: Assist Lead Installer in carrying out full HVAC installation skills such as: equipment removal and installation of new, duct repair and/or replacement (fiberglass, flex, and metal), soldering, venting flues, refrigerant leak detection, and charging, recovering and reclaiming refrigerant, measuring refrigeration system parameters (gas pressures and temperatures, etc.), calculating static and CFM delivery, carrying out basic plumbing and electrical skills. Load trucks with materials, tools, and equipment as instructed by Lead Installer. Learn proper install methods from Install Lead. Nice to Haves: High school diploma or GED. Valid DL EPA Certification Demonstrate the mental aptitude and physical ability required to do the job. Excellent communication & customer service skills. Ability to climb in attics, under houses and in box trucks in extreme temperatures Job Type: Full-time Pay: $17-$20 an hour Schedule: Monday to Friday We are an equal opportunity employer! Please submit your email for consideration and to set up a time to talk about your new career! Check out our website at ******************