Installation technician jobs in Mebane, NC - 1,117 jobs

The Cable Technician is responsible for installing, maintaining, and troubleshooting structured cabling systems to support voice, data, video, and network communications. This role ensures all cabling infrastructure is installed to industry standards, project specifications, and customer requirements while maintaining safety and quality at all times. Key Responsibilities Installation & Cabling Work Install, terminate, and test copper (Cat5e, Cat6, Cat6A) and fiber optic cabling systems. Pull, label, route, and dress cables in commercial, industrial, and data center environments. Install cable trays, J-hooks, ladder racks, racks, patch panels, and related infrastructure hardware. Perform fiber splicing, connector installation, and end-to-end certification. Install network equipment including switches, wireless access points, and telecom room hardware as directed. Testing & Troubleshooting Conduct continuity, performance, and certification testing using Fluke or similar testers. Diagnose and resolve cable faults, signal loss, and connection issues. Perform repairs and upgrades to existing cabling systems with minimal downtime. Documentation & Compliance Complete detailed daily job reports, cable logs, labeling documentation, and test results. Ensure all cabling meets BICSI, NEC, and manufacturer standards. Qualifications 1-3+ years of structured cabling or low-voltage installation experience preferred. Knowledge of copper and fiber standards, cabling best practices, and industry tools. Ability to read and interpret blueprints, floor plans, and cable layouts. Experience with cable testing equipment (Fluke DSX, OTDR, light meters). Familiarity with LOTO, ladder safety, PPE, confined spaces, and general construction safety. Strong troubleshooting and problem-solving skills. Ability to lift 50+ lbs, work on ladders, and work in overhead or crawl spaces. Valid driver's license and reliable transportation. Preferred Certifications BICSI Installer 1 or Installer 2 (Copper or Fiber) OSHA 10 or OSHA 30 Manufacturer-specific cabling certifications (e.g., Commscope, Panduit)

Rangam is seeking candidates for a Direct Hire role as a Bioprocess Technician III with our client, one of the world's largest pharmaceutical companies. Seeking candidates in Sanford, NC or willing to relocate. Use Your Power for Purpose Our breakthroughs would not reach the hands of patients without our dedicated pharmaceutical manufacturing team. We rely on agile members who understand the critical impact of their role in client's mission. Patients need colleagues like you who take pride in their work and continuously strive to improve outcomes. Your efforts ensure that patients and physicians have timely access to the medicines they need. What You Will Achieve In this role, you will: Take responsibility for individual contributions to achieve team deliverables, working effectively as a team member and coordinating with others. Manage personal time and professional development, being accountable for results. Follow standard procedures to complete tasks of varying scope, sequence, and complexity within the agreed timeframe. Identify and solve moderately routine problems. Complete assignments with moderate supervision using established procedures, referring deviations from standard procedures to the supervisor. Ensure work is reviewed for accuracy, quality, and adherence to standards. Be responsible for the production of drug substances or active biological ingredients (ABI), assisting in various activities and functions within a manufacturing facility, and ensuring equipment functionality. Support technical operations, maintain housekeeping standards, keep training status current, and assist in the implementation of new technology for process execution and analysis. Here Is What You Need (Minimum Requirements) High School Diploma or GED with 2+ years of relevant experience Strong verbal and written communication skills Proficiency in using standard manufacturing equipment and tools Basic understanding of Good Manufacturing Practices (GMP) Ability to follow detailed instructions and standard operating procedures Strong problem-solving skills in a structured environment Capability to work effectively in a team setting Basic computer skills, including familiarity with data entry and reporting systems Bonus Points If You Have (Preferred Requirements) Experience in a pharmaceutical or biotechnology manufacturing environment Knowledge of regulatory requirements and quality systems Strong organizational skills and attention to detail Ability to adapt to changing priorities and manage multiple tasks Demonstrated ability to take initiative and drive continuous improvement Strong analytical skills and the ability to interpret technical data Physical / Mental requirements The physical requirements include Lifting, sitting, standing, walking, bending, ability to perform mathematical calculations and ability to perform complex data analysis. Does not include requirements that are generally applicable to most or all jobs at client's, such as “ability to communicate,” “ability to work on teams”, “office job involving use of computer”, etc. Non-Standard work schedule, travel or environment requirements This is a M-F position and will be a rotating monthly. The colleague will work one month on 1st shift 7am-3:30pm, then rotate one month on 2nd shift 3pm-11:30pm, then rotate one month on 3rd shift 11pm-7:30am. Scheduling is subject to change. Other job details Last day to apply: December 16th, 2025 Work Location Assignment: On Premise The salary for this position ranges from $22.94 to $38.24 per hour. In addition, this position offers eligibility for overtime, weekend, holiday and other pay premiums depending on the work schedule and the Company's policies. We offer comprehensive and generous benefits and programs to help our colleagues lead healthy lives and to support each of life's moments. Benefits offered include a 401(k) plan with client's Matching Contributions and an additional client's Retirement Savings Contribution, paid vacation, holiday and personal days, paid caregiver/parental and medical leave, and health benefits to include medical, prescription drug, dental and vision coverage. Learn more at client's Candidate Site - U.S. Benefits | (uscandidates.my**benefits.com). Compensation structures and benefit packages are aligned based on the location of hire. The United States salary range provided applies only to the United States - North Carolina - Sanford location. Relocation assistance may be available based on business needs and/or eligibility. To find out more about Rangam, and this role, click the apply button. Satnam Singh SA Technical Recruiter | Rangam Consultants, Inc M: ************** E: *****************| W: **************

This is Mandeep Singh from US IT Solutions. We offers services in IT staffing, Mobile development, Web development and Cloud computing . US IT Solutions work along with its clients to deliver high-performance results, based exclusively on the one of a kind requirement. Job Description Solid knowledge and experience with browser based applications. Experience researching, analyzing and interpreting automated system problems. Very good oral and written communication skills to effectively deal with all levels of the organization. Solid experience leading a team. Experience analyzing and projecting the needs of a team to ensure success. Experience implementing and managing a help desk operation. Additional Information Thanks and regards, Mandeep Singh ************ Ext 435

Warm Greetings! My name is Srinath and I am a Sr. Technical Recruiter with Avance Consulting. We are a leading consulting company and have been in consulting business for last 10 years. We are primary vendors to several Fortune 1000, Investment Banks and Financial companies. I found your resume on one of the job boards and it looks to be a good fit for an open position we have. Please review the listed below. If you are interested, please respond with your updated resume or give me a call on ************ Ext 238 at your earliest convenience. If you are not looking for new roles, please forward this email to someone either from your professional network or friends who are looking for new opportunities since we have an excellent referral program. Hi, I hope you are doing good. I have Opportunity with one of my client, please find below Job Description for your review. If you are interested please forward me your updated resume along with your contact details to discuss further Role: Technology Lead - Service Now Duration: Full TIme / Permanent Location: Cary, NC Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technology. Preferred • At least 5 years of experience in configuration and maintenance of ITSM tools. • At least 4 years experience configuring and maintaining Service Now. • Good knowledge of Java/J2EE technology and framework. • Domain knowledge of Insurance • At least 5 years of experience in application maintenance and support. • Analyze and resolve issues to ensure SLA adherence and customer satisfaction. • Perform ticket triage, prioritization, independent testing, change management processes, implementation activities and post implementation support. • Support client interfacing activities and create the relevant reports in a timely manner. • Excellent written & verbal communication • Strong Analytical skills • Experience working with offshore/onshore resources • Ability to work in team environment and client interfacing skills. • Experience and desire to work in a Global delivery environment. • Ability to work in team in diverse/ multiple stakeholder environment • Experience and desire to work in a Global delivery environment The job entails sitting as well as working at a computer for extended periods of time. Should be able to communicate by telephone, email or face to face. Travel may be required as per the job requirements. Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

As of 10.8.2020 Job Summary: The position of the Installation Helper is responsible for assisting the Installer in performing customer installations according to agreed-upon project timeline and costs. Essential Functions: Assist Installer with performing customer installations according to plan: Read and interpret blueprints and art work Operate a boom truck, workout of baskets, lifts, scaffolding Climb ladders and perform work while on ladders Use and operate a wide variety of power tools, ranging from drills to jackhammers Perform electrode/arch welding Maintain awareness for installation issues and report to immediate supervisor Check product for completion and proper loading prior to leaving facility Perform quality checks to avoid rework on installations Assist Installer with completing required documentation for each job site Complete Bill of Lading (BOL) before leaving facility Document job status by taking photographs and completing written documentation Abide by employment policies as established by principles Participate in safety training and inspections Perform routine checks and maintenance on all company vehicles, equipment and tools Learn OSHA and state DOT requirements Attend safety meetings and training Maintain awareness of safety risks and bring to manager's attention Abide by all safety regulations when in Allen facilities and when working at customer site General Expectations Make travel arrangements as necessary Submit expenses at least weekly Schedule maintenance/repairs to company vehicle Attend meetings and conference calls as required MUST possess a valid United States Passport 5. Follow the rules and regulations related to the safety of all employees working for the Company Adherence to all mandated safety procedures including: driving policy, production area safety requirements and fire safety Safety requires all employees to review materials provided by the Company related to any updates on safety procedures Informs management of any safety related issues 6. Ensures safety of self and others through proper use and care of equipment/work area Handles and operates all equipment in a careful and safe manner Maintains tools and equipment in good working order and stores them properly Keeps all work areas neat and clear of potential hazards Perform other duties as assigned Competencies: Ability to prioritize tasks and handle numerous issues simultaneously Organized, detail and results oriented Strong analytical and problem-solving skills with the ability to exercise sound judgment and make good decisions based on the best interests of the company Strong sense of urgency to complete tasks in a timely manner Ability to work independently, with minimal supervision Mechanical capabilities Basic mathematical skills to include but not limited to adding, subtracting, multiplication, division, and percentages Ability to read a tape measure Ability to work in a fast-paced, high-volume environment Ability to read blue prints and interpret sign/shop drawings and specifications Thoroughness/detailed Time management Apply personal safety measures including utilizing the correct PPE Ability to use electric hand tools including a paint gun and sander Ability to mix paint and learn new paint systems Ability to take measurement of a job (ex: using a tape measure, steel rule, tri square) Problem solving Time management Ability to climb ladders Ability to work with fractions including adding and subtracting Ability to convert inches to feet General electrical experience Work Environment: While performing the duties of this job, the employee is frequently exposed to fumes or airborne particles, moving mechanical parts and vibration. The noise level in the work environment can be loud. The employee is exposed to a variety of extreme conditions at job sites. This position is performed in outside weather conditions. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential function of this job. While performing the duties of this job, the employee is often required to perform the following activities: Standing. Walking. Moving about on foot to accomplish tasks, particularly for long distances or moving from one work site to another. Sitting. Ability to sit at a desk for long periods of time. Fingering. Picking, pinching, typing or otherwise working, primarily with fingers. Grasping. Applying pressure to an object with the fingers and palm. Talking. Expressing or exchanging ideas by means of the spoken word. Hearing. Perceiving the nature of sounds at normal speaking levels with or without correction. Ability to receive detailed information through oral communication, and to make the discriminations in sound. Light work. Exerting up to 10 pounds of force occasionally, and/or up to 5 pounds of force frequently, and/or negligible amount of force constantly to move objects. Visual Acuity. To perform close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; and visual inspection. Reaching: Extending hands and arms in all direction Forward bending, squatting, overhead reaching, kneeling/crawling, and climbing Continuous standing Lifting: Up to 70 lbs and team lifting up to 100 lbs Carry and use 5 lb to 10 lb power tools or paint containers very frequently Pushing and pulling Moderate level of hand to eye coordination and dexterity including picking, pinching, holding, grasping and repetitive flexion/rotation Position Type/Expected Hours of Work: This is a full-time, 40 hour a week position with overtime as required. Travel: Up to 75% travel is required for this position including extended stays and possible weekends. Educational Requirements: Highschool diploma or GED. Preferred Educational Requirements: Technical school training or certification. Knowledge Requirements: Current driver's license and clean driving record; CDL preferred Sign industry experience Construction industry experience Advanced computer proficiency General construction methods Hand tools OSHA general industry standards Computer proficiency including Microsoft Office Suite (Outlook, Word and Excel) Electrode/arc welding General Disclaimer: The duties listed above are intended only as illustrations of the various types of work that may be performed. Other duties may be assigned as needed by the Company. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The job description does not constitute an employment agreement between the employer and employee and is subject to change by the employer as the needs of the employer and requirements of the job change. Allen Industries is an Equal Employment Opportunity, Affirmative Action Employer. We consider applicants for all positions without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital, disability or veteran status.

Jobs for Humanity is partnering with DISH to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: DISH Job Description Department Summary Our Technicians deliver TV and Smart Home solutions to millions of customers. As a technician, we will train you to lead the charge for a world class customer experience, educating and connecting more Americans with every home you visit. You're the backbone of our organization and ensure an excellent customer experience. Our dedication to customer experience is paying off: in 2023, DISH earned the J.D. Power award for being #1 in Overall Customer Satisfaction for the sixth year in a row. Job Duties and Responsibilities What's in it for you? Guaranteed promotion after 6 months with a $1.00 per hour pay increase! Performance Incentives with the potential for up to $6,400 in your first year and $9,100 each following year! Paid training, paid time off & paid holidays 4-day work week with opportunities to work overtime Medical, Dental, Vision and Life Insurance packages and Health Savings Account Free DISH TV programming at a value of $114.99/month at your home, plus deeply discounted Sling TV and Boost Infinite phone plans 401(K) with company match & Employee stock purchasing program (ESPP) Tuition Reimbursement DISH-supplied van, tools, and uniforms Our greatest benefit is opportunity with over 400 of our current technician leadership starting as a technician. If you have grit and tenacity, you will grow quickly at DISH! Performance based promotions include an automatic 5% pay increase at level 2 and 10% at levels 3 and 4. What will you be doing? As a Field Technician, you will be representing DISH in customers' homes daily. We build our value by simplifying lives and using the DISH install to consult homeowners on their infinite smart home possibilities. Skills, Experience and Requirements All technicians must have: Aptitude to build rapport quickly. We want you to have a great time servicing our clients Ability to work at heights, including ladders up to 40 feet, and in all weather conditions Ability to lift over 70 lbs A valid driver's license in the state you are seeking employment with a driving record that meets DISH's safety standard Travel may be required Salary Range Compensation: $19.50/Hour Compensation and Benefits From versatile health perks to new career opportunities, check out our benefits on our careers website . Employment is contingent on successful completion of a pre-employment screen, to include a drug test and an acceptable driving record. Compensation listed may reflect a combination of hourly pay rate and location pay differential.

We are searching for an HVAC Controls Technician. Troubleshoot and determine the need for repairs or replacement of instrumentation and end devices. Loop check and provide commission start-up assistance to a programmer. Set-up and start Viable Frequency Drives (VFD's). Install and terminate instrumentation per layout drawings and wiring diagrams Qualifications Minimum of 3 years of experience in programming Tridium HVAC controls systems preferred Minimum of 3 years of experience in HVAC service field preferred Carrier CCN and i-Vue experience a plus Electrical experience including routing of conduit and ability to read electrical schematics a plus Must be willing to travel to out of town job sites and occasional extended stay periods (usually 1 to 2 weeks) What We Offer Supportive work environment Opportunity to learn additional skills as well as upward mobility Eight paid holidays Three weeks of vacation first year Company paid life insurance, short and long term disability 401(k) match of 100% up to 4% AC Corporation is an Equal Opportunity/Affirmative Action employer and will consider all qualified applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Preferred Qualifications Extensive experience as a locksmith, preferably in an institutional setting. Proficiency in Microsoft Office applications, including Word and Excel. Familiarity with AiM work order systems is a plus but not required. Membership in the Associated Institutional Locksmith Association/and or recognized industry organization is preferred. Certified Journey Level Certification and/or Fire Door Inspector Certification is advantageous but not mandatory. Work Schedule Monday - Friday, 7:00 a.m. - 3:30 p.m.

Job Description GAC Enterprises, LLC, a fast-growing telecommunications construction company, is seeking a Fiber Splicer to join our team. As a Splicer, you will be responsible for splicing fiber optic cables and performing maintenance, troubleshooting, and repair of fiber optic networks. This position requires excellent attention to detail, strong communication skills, and the ability to work effectively both independently and as part of a team. Responsibilities Splice and terminate fiber optic cables according to industry standards Complete and maintain accurate splice records, as-built maps, and other related documentation Troubleshoot problems with fiber networks and find effective solutions Perform fiber optic testing using equipment such as OTDR, power meters, and fusion splicers Ensure all work is completed within safety guidelines and company standards Maintain and care for all assigned equipment Train, mentor, and provide leadership to employees of an assigned area, or project. Be available for on call dispatching for maintenance work. Other duties as assigned by leadership. Requirements High school diploma or equivalent At least 2 years of experience in fiber optic splicing and network maintenance Experience using equipment such as fusion splicers, OTDRs, and power meters Splicing certified Knowledge of industry standards and regulations Excellent attention to detail Strong communication and interpersonal skills Ability to work independently and as part of a team Willingness to work overtime and travel if needed Benefits Health Care Plan (Medical, Dental & Vision) Life Insurance (Basic, Voluntary & AD&D) Short-Term & Long-Term Disability Paid Time Off (Vacation, Sick & Public Holidays) Employee Discount Program

Field Technician- Splicer Title: Fiber Optic Splicer FLSA Status: Non- Exempt Shift: N/A Reports to: Construction Superintendent Department: TEP Fiber Employment Status: Full-time Supervisory Responsibilities: No Location: Raleigh Date Created/Last Evaluated: 10.20.2023 Summary Position requires incumbent to work as part of a small team or individually to splice and maintain fiber routes. Qualification Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum Qualifications Must have High school diploma or equivalent 1 year of fiber installation experience with ability to take direction and learn from experience OTDR experience preferred Must have a valid driver's license and a clean driving record to operate a company vehicle Knowledge, Skills, and Abilities Ability to troubleshoot damaged fiber, effectively and efficiently Ability to read, understand, and update splice documentation and maps as required Knowledge of applicable electronic equipment and specialty tools Knowledge of basic computer skills including Microsoft Word, Excel, and Adobe Acrobat Pro Ability to read blueprints Ability to work independently as well as in a team Ability to analyze and solve problems Ability to use and take care of hand tools and mechanical equipment Ability and interest in performing work in the field Demonstrated willingness to learn Physical ability to lift 75+lbs. and be comfortable working in an outdoor environment in all types of weather Ability to maintain an effective working relationship with other employees and the general public Ability to travel for extended periods of time (travel required is 50% to include overnight). Ability to be covered by company auto insurance plan Supervisory Responsibilities This position has no supervisory responsibilities. Essential Functions Terminate, splice, and install a variety of fiber optic connectors and enclosures including both loose tube fiber and ribbon fiber Proficient in fiber color codes, in using fiber tools and fiber optic test equipment including fusion splicer, power meter, and OTDR Climb and use ladders on poles for accessing aerial fiber plant Perform aerial construction activities such as installing aerial fiber and fiber storage (snow shoes) Perform underground construction activities, including but not limited to, pulling new cable/fiber through short conduits, opening underground vaults or pedestals making minor repairs if required. Complete production reports Dig holes, work with hand tools, restore landscaping Lay fiber innerduct and pull fiber through existing ducts Operate heavy equipment and excavation truck Operate pipe and cable locators and mark underground utilities Measure and record installed quantities of fiber Assist on overall job including all tasks required to build and install a site per customer specifications Maintain clean, orderly environment adhering to company policies and industry regulation/standard(s) (OSHA) Physical Demands While performing the duties of this job, the employee is regularly required to be at site locations both on the ground and on building roof tops, sit, stand, walk, use both hands, and reach and raise items above the head, use fingers to feel and handle, talk and hear. While performing the duties of this job, the employee frequently is required to stoop, kneel and crouch, lift weight or exert a force of 75+ or more pounds. Work Environment Most work is performed externally, on-site, outdoors, with exposure to the elements of nature working under normal construction conditions. 95% of travel is required in support of this position. Approximately 5% performed in climate-controlled internal office environment working under normal office conditions. Night and weekend work may be required up to 25% of the time. The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of the position. All employees may have other duties assigned at any time.

About Us With over 18 years of expertise at the forefront of the communications and construction industries, Taylor's Construction, Inc. builds networks that fuel communities and drive innovation. From planning to execution to meeting budgets and deadlines, we excel in the intricate deployment of ariel and underground networks, maximizing efficiency and minimizing disruption. Whether it's high speed-fiber optic installations, complex underground networks, or ensuring reliable connections to every doorstep, Taylor's Construction Inc. delivers. We thrive on challenges, turning ambitious projects into success stories with our expertise in fiber optic technology and meticulous project management. Taylor's Construction Inc., empowers businesses, homes, and entire communities with robust connectivity solutions. About this Role Taylor's Construction is seeking skilled Fiber Splicers to perform splicing, testing, and troubleshooting of fiber optic cables for telecommunications construction projects. This role requires precision, technical expertise, and a strong commitment to safety and quality. What You'll Do Perform fiber optic splicing in various environments. Test and troubleshoot fiber optic networks using OTDRs, light meters, and other diagnostic tools. Interpret splicing diagrams, work orders, and engineered prints. Complete splice documentation, labeling, and testing reports accurately. Ensure compliance with all safety protocols, quality standards, and client specifications. Work with supervisors and project managers to plan daily tasks and meet project deadlines. Provide field support during cutovers, emergency repairs, and restoration activities. What You'll Bring 2+ years of experience in fiber optic splicing or telecommunications construction. Knowledge of OTDRs, fusion splicers, cleavers, and related tools. Ability to read and interpret splicing diagrams, route maps, and engineering prints. Strong troubleshooting skills and attention to detail. Experience with both single-mode and multi-mode fiber, preferred. Willingness to work outdoors in varying weather conditions and travel to multiple job sites, preferred What You'll Get As a Quanta Services employee, we offer a wide range of benefits to fit your needs. 401(k) with immediate matching and vesting Fully comprehensive benefits packages; Medical, Dental, Vision Your choice of PPO, HSA, FSA Short term and long term benefits Employee discounts on consumer goods Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law. We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

Morguard is a fully integrated real estate company. We strategically invest in high-quality, well-located, multifamily assets across North America and our onsite teams are critical to our Communities' success. Now hiring an experienced Lead Maintenance Technician to support maintenance operations for our residential community. We're Hiring An HVAC Certified Lead Maintenance Technician to manage the work orders, preventative maintenance, and day to day work load of the onsite team under the direction of our Community Manager. Pay: * The pay rate for this position is $35-$37 per hour. * Are eligible for employer provided benefits as well as added income via quarterly bonuses - up to 5% of the annual salary. * Are eligible for a $100 stipend for on-call duties. Hours: * Full time, Monday through Friday, from 8:00 AM to 5:00 PM with an hour off for lunch. In this role, you will be required to participate in the On-Call Rotation. * Take turns responding to On-Call Emergencies, one-week rotation * Each On-Call Rotation earns an added On-Call Stipend - paid directly to you even if you're not called to the property We're looking for you To help maintain the highest standards for our apartment community. You'll also be responsible for routine maintenance and called to assist with any capital improvement projects onsite. We need your strong work ethic, customer service for our residents, and a good foundation in general appliance repair, painting, plumbing, and ac diagnostics and repair. Some of your responsibilities include: * Being thorough and courteous; we need you to accurately assess the root cause of each work order that comes in and do your best to close it out and improve our residents' homes * Walk the property each day; know your grounds and your buildings and clear away any trash or debris that you find. * Manage the inventory of vacant apartments; assist with the turn-around process or schedule any required contractors as needed. Inspect all vacant units before the move in to maintain quality * Respond to assigned work orders or general maintenance in a timely manner and always communicate with your Maintenance Supervisor or Property Manager as things move forward or take longer to complete than anticipated * Work with the Regional Maintenance Supervisor on any special projects or property wide routine maintenance as necessary Above all, you will be responsible for staying in sync with the company's and the community's operating and safety policies and procedures and for adhering to federal, state and local laws pertaining to the operation of the community and Fair Housing. Qualifications Experience & strengths you'll need: * HVAC Type I and Type II/EPA Universal Certification; a CPO certification is highly preferred but not required. * Valid Driver's License & ability to respond to after hours or weekend emergencies * Well versed with troubleshooting major appliances, water heaters, boilers, and AC units. * Direct previous experience on a garden-style apartment community * A dedication to company goals and values and a commitment to the success of each associate as a member of the team * Good communicator and listener with strong customer service skills * General knowledge or direct experience of plumbing, drywall repair, painting, carpentry, pressure cleaning, or minor electric troubleshooting and repair * Possess and continually improve the technical skills necessary to perform assigned maintenance This position makes use of onsite golf carts for purposes of property tours and inspections. The identified candidate is required to provide proof of a valid Driver's License in good standing for consideration of hire. Additional Information Why you should join Morguard At Morguard, our employees are our greatest investment. We make people our priority and strive to create a culture of respect, health and safety, and equal opportunity to support employees to meet their goals. When you join Morguard, you join a strong and committed team and will have access to: * Employer Provided Medical Insurance Options * Excellent culture that supports a work-life balance with time off for Summer Hours, Vacation, Personal, Sick Leave, and Paid Holidays * Education Reimbursement Program * Dollar for dollar matching 401k Savings Plan with immediate vesting * Opportunity to live onsite within portfolio with our Employee Discount All job offers are subject to a pre-employment drug test and criminal/credit background check. * Morguard is an equal opportunity employer +This is intended to describe the nature and level of work being performed by individuals assigned to this position. It is not an exhaustive list of all responsibilities required of the job. Job descriptions may also be rewritten periodically to reflect any changes in the position's duties. Morguard is an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Morguard participates in the E-Verify program to confirm eligibility to work in the United States. PRIVACY

Morguard is a fully integrated real estate company. We strategically invest in high-quality, well-located, multifamily assets across North America and our onsite teams are critical to our Communities' success. Now hiring an experienced Lead Maintenance Technician to support maintenance operations for our residential community. We're Hiring An HVAC Certified Lead Maintenance Technician to manage the work orders, preventative maintenance, and day to day work load of the onsite team under the direction of our Community Manager. Pay: The pay rate for this position is $35-$37 per hour. Are eligible for employer provided benefits as well as added income via quarterly bonuses - up to 5% of the annual salary. Are eligible for a $100 stipend for on-call duties. Hours: Full time, Monday through Friday, from 8:00 AM to 5:00 PM with an hour off for lunch. In this role, you will be required to participate in the On-Call Rotation. Take turns responding to On-Call Emergencies, one-week rotation Each On-Call Rotation earns an added On-Call Stipend - paid directly to you even if you're not called to the property We're looking for you To help maintain the highest standards for our apartment community. You'll also be responsible for routine maintenance and called to assist with any capital improvement projects onsite. We need your strong work ethic, customer service for our residents, and a good foundation in general appliance repair, painting, plumbing, and ac diagnostics and repair. Some of your responsibilities include: Being thorough and courteous; we need you to accurately assess the root cause of each work order that comes in and do your best to close it out and improve our residents' homes Walk the property each day; know your grounds and your buildings and clear away any trash or debris that you find. Manage the inventory of vacant apartments; assist with the turn-around process or schedule any required contractors as needed. Inspect all vacant units before the move in to maintain quality Respond to assigned work orders or general maintenance in a timely manner and always communicate with your Maintenance Supervisor or Property Manager as things move forward or take longer to complete than anticipated Work with the Regional Maintenance Supervisor on any special projects or property wide routine maintenance as necessary Above all, you will be responsible for staying in sync with the company's and the community's operating and safety policies and procedures and for adhering to federal, state and local laws pertaining to the operation of the community and Fair Housing. Qualifications Experience & strengths you'll need: HVAC Type I and Type II/EPA Universal Certification; a CPO certification is highly preferred but not required. Valid Driver's License & ability to respond to after hours or weekend emergencies Well versed with troubleshooting major appliances, water heaters, boilers, and AC units. Direct previous experience on a garden-style apartment community A dedication to company goals and values and a commitment to the success of each associate as a member of the team Good communicator and listener with strong customer service skills General knowledge or direct experience of plumbing, drywall repair, painting, carpentry, pressure cleaning, or minor electric troubleshooting and repair Possess and continually improve the technical skills necessary to perform assigned maintenance This position makes use of onsite golf carts for purposes of property tours and inspections. The identified candidate is required to provide proof of a valid Driver's License in good standing for consideration of hire. Additional Information Why you should join Morguard At Morguard, our employees are our greatest investment. We make people our priority and strive to create a culture of respect, health and safety, and equal opportunity to support employees to meet their goals. When you join Morguard, you join a strong and committed team and will have access to: Employer Provided Medical Insurance Options Excellent culture that supports a work-life balance with time off for Summer Hours, Vacation, Personal, Sick Leave, and Paid Holidays Education Reimbursement Program Dollar for dollar matching 401k Savings Plan with immediate vesting Opportunity to live onsite within portfolio with our Employee Discount All job offers are subject to a pre-employment drug test and criminal/credit background check. *Morguard is an equal opportunity employer +This is intended to describe the nature and level of work being performed by individuals assigned to this position. It is not an exhaustive list of all responsibilities required of the job. Job descriptions may also be rewritten periodically to reflect any changes in the position's duties. Morguard is an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Morguard participates in the E-Verify program to confirm eligibility to work in the United States. PRIVACY

Morguard is a fully integrated real estate company. We strategically invest in high-quality, well-located, multifamily assets across North America and our onsite teams are critical to our Communities' success. Now hiring an experienced Lead Maintenance Technician to support maintenance operations for our residential community. We're Hiring An HVAC Certified Lead Maintenance Technician to manage the work orders, preventative maintenance, and day to day work load of the onsite team under the direction of our Community Manager. Pay: The pay rate for this position is $35-$37 per hour. Are eligible for employer provided benefits as well as added income via quarterly bonuses - up to 5% of the annual salary. Are eligible for a $100 stipend for on-call duties. Hours: Full time, Monday through Friday, from 8:00 AM to 5:00 PM with an hour off for lunch. In this role, you will be required to participate in the On-Call Rotation. Take turns responding to On-Call Emergencies, one-week rotation Each On-Call Rotation earns an added On-Call Stipend - paid directly to you even if you're not called to the property We're looking for you To help maintain the highest standards for our apartment community. You'll also be responsible for routine maintenance and called to assist with any capital improvement projects onsite. We need your strong work ethic, customer service for our residents, and a good foundation in general appliance repair, painting, plumbing, and ac diagnostics and repair. Some of your responsibilities include: Being thorough and courteous; we need you to accurately assess the root cause of each work order that comes in and do your best to close it out and improve our residents' homes Walk the property each day; know your grounds and your buildings and clear away any trash or debris that you find. Manage the inventory of vacant apartments; assist with the turn-around process or schedule any required contractors as needed. Inspect all vacant units before the move in to maintain quality Respond to assigned work orders or general maintenance in a timely manner and always communicate with your Maintenance Supervisor or Property Manager as things move forward or take longer to complete than anticipated Work with the Regional Maintenance Supervisor on any special projects or property wide routine maintenance as necessary Above all, you will be responsible for staying in sync with the company's and the community's operating and safety policies and procedures and for adhering to federal, state and local laws pertaining to the operation of the community and Fair Housing. Qualifications Experience & strengths you'll need: HVAC Type I and Type II/EPA Universal Certification; a CPO certification is highly preferred but not required. Valid Driver's License & ability to respond to after hours or weekend emergencies Well versed with troubleshooting major appliances, water heaters, boilers, and AC units. Direct previous experience on a garden-style apartment community A dedication to company goals and values and a commitment to the success of each associate as a member of the team Good communicator and listener with strong customer service skills General knowledge or direct experience of plumbing, drywall repair, painting, carpentry, pressure cleaning, or minor electric troubleshooting and repair Possess and continually improve the technical skills necessary to perform assigned maintenance This position makes use of onsite golf carts for purposes of property tours and inspections. The identified candidate is required to provide proof of a valid Driver's License in good standing for consideration of hire. Additional Information Why you should join Morguard At Morguard, our employees are our greatest investment. We make people our priority and strive to create a culture of respect, health and safety, and equal opportunity to support employees to meet their goals. When you join Morguard, you join a strong and committed team and will have access to: Employer Provided Medical Insurance Options Excellent culture that supports a work-life balance with time off for Summer Hours, Vacation, Personal, Sick Leave, and Paid Holidays Education Reimbursement Program Dollar for dollar matching 401k Savings Plan with immediate vesting Opportunity to live onsite within portfolio with our Employee Discount All job offers are subject to a pre-employment drug test and criminal/credit background check. *Morguard is an equal opportunity employer +This is intended to describe the nature and level of work being performed by individuals assigned to this position. It is not an exhaustive list of all responsibilities required of the job. Job descriptions may also be rewritten periodically to reflect any changes in the position's duties. Morguard is an equal opportunity employer. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity or Veteran status. Morguard participates in the E-Verify program to confirm eligibility to work in the United States. PRIVACY

Be part of the future! We are one team, dedicated to working collaboratively to create purposeful solutions that propel the world forward. We hope you will join our diverse team of top people - you bring your talent, and we'll give you the space and opportunities to grow and succeed. We are committed to make a difference. Work with an Award-Winning technology that delivers sustainability, safety, and health. What we offer: Competitive Starting Pay On the Job Paid Training Tuition Reimbursement Global Advancement Opportunities with Unlimited Career Path Company Vehicle (as applicable) Referral Bonuses Comprehensive Benefits Medical/Dental/Vision insurance Health Savings Account (HSA) Life Insurance 401(k) savings plan with company match Short-Term and Long-Term Disability Employee Assistance Program Wellness Program And More! What you will do Perform HVAC Control systems programming, troubleshooting, installation, commissioning, and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components. Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment. Provide front line technical and repair support through effective communications with Johnson Controls customers. Provide system repair and or update recommendations and assist in proposing of recommendations to Johnson Controls customers. Be part of an expanding team of the best technicians in the industry while you build career with a first-class global organization. How you will do it Loading Johnson Controls field and network level controller software. Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation. Keeps management and JCI contractor or customer informed of job progress and issues. Calibrates systems requiring basic electronic test equipment. Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation. Documents changes and provides information for as-built documentation. Execute company sponsored as well as personally initiated training to insure the highest level of knowledge and capability are maintained Engage with customers to fully understand their systems and needs. Communicates with the JCI contractor or customer upon arrival and before leaving the work site. Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Required: 2-4 years experience with BAS, Honeywell, Siemens , Tridium , Trane, Automated etc... Strong understanding of HVAC systems, sequence and applications Demonstrated technical aptitude in mechanical and electro-mechanical fields Able to use hand, power tools and electrical testing equipment such as a multi meter. Solid knowledge base in use of personal computers. Attention to detail. Good communication and listening skills. HIRING HOURLY RANGE: $24- $34(Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job Description The Fiber Optic Splicer Technician position installs and maintains fiber optic cables as well as provides technical assistance in the design and testing of fiber optics. Responsible for ensuring the integrity and efficiency of our network systems through expertise in splicing techniques and equipment repair. Duties & Responsibilities Splice single mode and ribbon fiber Fusion splice and terminate various types of fiber optic connectors Interpret as-builts and splicing matrices Installation and dressing of fiber optic cabling Perform uni-directional, bi-directional, and power meter testing (OLTS) Troubleshoot fiber optic links and certify fiber optic links Respond to emergency situations to restore service outages Report splicing matrix. Physical Aspects · The physical demands described here are typical of those that must be met by a team-member to successfully perform the essential functions of their job in fiber cable construction. · While performing the duties of this job, team-members are regularly required to talk or listen. The team member is frequently required to stand; walk; use hands to finger, handle, and feel; and reach with hands and arms. · The team member is frequently required to perform rigorous physical labor; sit; climb different types of structures (wood, steel, etc.); or balance; and stoop, kneel crouch or crawl. Team members frequently lift or move up to or in-excess of 50 lbs. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment While performing the duties of this job, team-members may frequently be exposed to fumes or airborne particles, moving mechanical parts and vibration. Team members are occasionally exposed to a variety of extreme conditions at construction sites. The noise level in the work environment can be loud. Powerline construction work is performed outside and is subject to diverse weather conditions. Competencies Team-Oriented Self-Motivated Customer Service Focused Ethical and Honest Dutifully follows established Safety Rules and Company Policy Required Qualifications Minimum of 2 years of experience in fiber splicing. Experience with single fiber splicing, ribbon splicing, power meter and OTDR. Good understanding of aerial and buried fiber optic plant. Strong understanding and ability to read prints and diagrams associated with splicing. Excellent communication skills (verbal and written) & the ability to interact professionally with customers. Valid Driver's License and acceptable driving record. Valid DOT Medical Card. Ability to work under pressure and in a fast paced and quickly changing environment. Ability & Willingness to travel and work evenings and weekends as needed. This position will require being able to respond to afterhours fiber outages. Ability to work and climb up to 35 feet. Ability to maintain a positive attitude and strong work ethic. Proficient in Microsoft Office Suite (Excel and Word). Excellent organizational skills and strong attention to detail. This is a safety sensitive position, and all applicable policies including drug testing and background checks will apply. Special Position Requirements River City Construction provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, gender, national origin, age, disability or genetics. In addition to federal law requirements, River City complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. Benefits We offer a comprehensive benefits package designed to support the well-being of our employees and their families. Our benefits include medical, dental, and vision coverage, paid time off, company-paid holidays, a 401(k) plan, and numerous voluntary benefits.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs expert level break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to location root cause of problem; dismantling devices to gain access to and remove defective parts; examining parts to detect imperfections; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; testing of device to observe performance; and performing tests for electrical circuitry and mechanical systems; reconditioning and repairing machine tools. · Identifies and sources parts, supplies and repair items as necessary. Performs evaluations of alternatives to improve cost and / or reliability of equipment. · Independently performs maintenance as per industry standards. · Works with customer counterparts to optimize maintenance, reliability, and preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, applicable management systems, and written explanation regarding observation and collected equipment performance data. · Provides assistance to lower level technicians and leadership to project teams. Performs expert functions as a part of training and development. · Troubleshoots and analyzes complex control systems to resolve in-depth software/ hardware and configuration problems. · Utilizes advanced maintenance technologies to collect equipment performance data. Observes trends and makes recommendations. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 10 years of related experience in specific industry; or, 12 years of experience in specific industry. · Possesses comprehensive understanding of electrical, mechanical, fluid power and control systems. Can analyze the problem, synthesize alternative solutions, and perform repairs. · Must be able to use basic hand tools and specialized tools as appropriate. · Extensive travel required. (Local, National). Applicants can live anywhere within the Continental U.S Desirable KSAs: · Experience in condition based maintenance techniques, precision mechanical alignments, and maintenance of applicable process equipment. · Experience in programmable logic controllers, field device troubleshooting, and maintenance of electrical drive and motor systems. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery factory floors. ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

Rangam is seeking candidates for a Direct Hire role as a Bioprocess Technician III and IV with our client Pfizer, one of the world's largest pharmaceutical companies. Seeking candidates in Sanford, NC *This position is being offered as part of a disability/neurodiversity hiring program which is designed to provide a more inclusive and supportive hiring process and work environment for job seekers with physical and cognitive disabilities, which includes, but is not limited to autism, ADD/ADHD, PTSD, OCD, Anxiety Disorder, Dyslexia, Bipolar, and Tourette's Syndrome* What You Will Achieve In this role, you will: Executes manufacturing operations on the production floor for buffer/media make-up tanks, glass washers, autoclaves, bioreactors / fermenters, filtration equipment, inoculum preparation, chromatography skids and/or UF/DF skids with varying levels of automation. Follow SOPs and batch records for unit operations Supports operation of manufacturing equipment and issue resolution associated with process equipment commissioning, qualification and validation. Drives troubleshooting, technical support/analysis and resolution of equipment, automation, and process issues on the manufacturing floor. Drives for Right first time and continuous improvement execution, the timely review of daily documentation and completes data entry; Identify and/or Communicate process and compliance concerns in real time. Supports audits and observation improvements. Collaborates with the Subject Matter Expert for manufacturing operations in support of QTS investigations and CAPA implementations. Responsible for remaining current on assigned training. Implements Lean Manufacturing, Sustainability, Operational Excellence initiatives; facilitate the drive towards continuous improvement in all manufacturing areas. Collaborates in the escalation process through various levels of management when operations, personnel safety, equipment functionality, product supply and/or quality compliance are at risk. Ensures work requests are generated when issues arise with facility / manufacturing equipment. Proficient in enterprise systems to support manufacturing operations including but not limited to, SAP, LIMS, AMPS, PDOCS and/or QTS. Ensure and participates in performance of cleaning, inventory, and maintaining facility in a safe and GMP compliant manner. Here Is What You Need (Minimum Requirements) High School Diploma or GED 2 - 5 years of experience, particularly in a pharmaceutical or other cGMP (Current Good Manufacturing Practices) environment Effective verbal and written communication Proficiency in operating and troubleshooting production equipment Strong understanding of cGMP and safety regulations Ability to maintain accurate documentation and records Experience in a clean room environment Competence in using automated and enterprise systems Effective cross-functional communication skills Bonus Points If You Have (Preferred Requirements) Experience in a pharmaceutical manufacturing environment Knowledge of process improvement methodologies Ability to train and mentor less-experienced colleagues Ability to work independently and as part of a team Attention to detail and commitment to quality Adaptability and flexibility in a dynamic work environment Physical / Mental requirements Requires the moving of heavy equipment and the ability to lift ~40 pounds. Moderate repetitive standing, sitting, bending, and ladder climbing on a daily basis. The incumbent needs to take the necessary safety precautions when working with pressurized systems, steam, and corrosive chemicals. The incumbent is required to attain knowledge of the operational equipment. The incumbent will be required to assist in solving problems regarding site assessment, specific units used in Biopharmaceutical manufacturing. The incumbent must be able to follow SOPs, MBRs and be able to use a multitude of enterprise systems including SAP, Delta-V, etc. Non-Standard work schedule, travel or environment requirements 2/2/3 schedule Night shift 6pm-6am & Day shift 6am-6pm | Pay: $25.37 - $32.00 The salary for this position ranges from $25.37 to $32.00 per hour. In addition, this position offers eligibility for overtime, weekend, holiday and other pay premiums depending on the work schedule and the Company's policies. We offer comprehensive and generous benefits and programs to help our colleagues lead healthy lives and to support each of life's moments. Benefits offered include a 401(k) plan with Pfizer Matching Contributions and an additional Pfizer Retirement Savings Contribution, paid vacation, holiday and personal days, paid caregiver/parental and medical leave, and health benefits to include medical, prescription drug, dental and vision coverage. Learn more at Pfizer Candidate Site - U.S. Benefits | (uscandidates.mypfizerbenefits.com). Pfizer compensation structures and benefit packages are aligned based on the location of hire. The United States salary range provided applies only to the United States - North Carolina - Sanford

Warm Greetings! My name is Srinath and I am a Sr. Technical Recruiter with Avance Consulting. We are a leading consulting company and have been in consulting business for last 10 years. We are primary vendors to several Fortune 1000, Investment Banks and Financial companies. I found your resume on one of the job boards and it looks to be a good fit for an open position we have. Please review the listed below. If you are interested, please respond with your updated resume or give me a call on ************ Ext 238 at your earliest convenience. If you are not looking for new roles, please forward this email to someone either from your professional network or friends who are looking for new opportunities since we have an excellent referral program. Hi, I hope you are doing good. I have Opportunity with one of my client, please find below Job Description for your review. If you are interested please forward me your updated resume along with your contact details to discuss further Role: Technology Lead - Service Now Duration: Full TIme / Permanent Location: Cary, NC Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technology. Preferred • At least 5 years of experience in configuration and maintenance of ITSM tools. • At least 4 years experience configuring and maintaining Service Now. • Good knowledge of Java/J2EE technology and framework. • Domain knowledge of Insurance • At least 5 years of experience in application maintenance and support. • Analyze and resolve issues to ensure SLA adherence and customer satisfaction. • Perform ticket triage, prioritization, independent testing, change management processes, implementation activities and post implementation support. • Support client interfacing activities and create the relevant reports in a timely manner. • Excellent written & verbal communication • Strong Analytical skills • Experience working with offshore/onshore resources • Ability to work in team environment and client interfacing skills. • Experience and desire to work in a Global delivery environment. • Ability to work in team in diverse/ multiple stakeholder environment • Experience and desire to work in a Global delivery environment The job entails sitting as well as working at a computer for extended periods of time. Should be able to communicate by telephone, email or face to face. Travel may be required as per the job requirements. Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.