Installation technician jobs in Sarasota Springs, FL - 1,156 jobs

Generator Service Technicians are responsible for performing both shop and/or field repairs, maintenance service and troubleshooting of diesel and gas generators, including automatic transfer switches, batteries, and load banks. *Hired candidates may be eligible for a Signing Bonus based on skill level and certifications. Essential Job Functions Perform technical skills including but not limited to, mechanical, electrical, troubleshooting and repair of generators Provide emergency/unscheduled repairs of generators both during normal working hours and after-hours, weekends, and holidays as directed Perform scheduled preventative maintenance service and/or repairs of generators Read and interpret operational manuals, electrical schematics, universal generator literature, and work orders to perform required maintenance and/or repairs Perform basic mathematical calculations Use a variety of hand and power tools, electric meters and material handling equipment in performing duties Detect faulty operations, defective material and report them and any other unusual situations to the service manager in a timely manner Comply with safety regulations and maintain clean and orderly shop work areas, company vehicles, and job site work areas Drive company vehicle to and from job sites throughout the day. Overnight travel by land and/or air may be required on occasion Additional Job Functions May perform work requiring the use of welding tools, winch, pulley, hoist and/or pallet jack May be required to tow a trailer, portable generator, or load bank using Company vehicle Experience and Skills Required Knowledge, Skills and Abilities (including physical and work environment) Working knowledge of power generation systems and its components, including knowledge of the mechanical operation, associated hazards, and proper usage of the equipment in order to troubleshoot and accurately diagnose malfunctions Proficient with generator and transfer switch controls Must be strong mechanically and electrically Ability to interpret schematics and operational manuals for practical application on repair and maintenance tasks Working knowledge of fundamental mathematical operations Ability to take preventative safety measures to avoid electrical shock, limit exposure to loud noises, and prevent personal injury by using personal protective equipment, including the use of NFPA 70E protective equipment when applicable Skilled usage of mechanical tools utilized to repair and maintain generators and their components Ability to perform duties in non-climate controlled environments such as outdoor weather conditions and non-weather related wet, humid and/or extreme heat conditions Position requires extended periods of standing, extended periods of sitting while driving, as well as bending, pulling, pushing, reaching, kneeling, squatting and the use of hands to finger, handle and feel Ability to lift and/or move heavy objects up to 100 lbs. throughout the work day Minimum Job Qualifications (education, work experience, licenses/certifications) High School or equivalent (GED) 5 to 7 years of related work experience or training or equivalent combination of both education and experience Motor Vehicle Record must be in good standing and comply with Company policy Experience on Generac, Caterpillar, Cummins, Kohler, Aksa, Blue Star, Taylor generators are a plus

" Develop proficiency in primary skills of customer relations, basic electricity, basic electronics, basic telephony, radio principles for LTE and 5G. IDEN, and basic principles of digital transmission, fiber communication, data communication, telephony terminology, industry standards, and on-line network control/maintenance systems. " Serve as a technical reference point for other functions. " Able to follow detailed method of procedures (MOP) and practices to perform routine maintenance on all radio interface equipment. " Perform Service Assurance work on all radio interface network elements. Interpret the alarm conditions on the network to proactively identify and implement repairs and restoration plans to ensure minimal service disruption and impact to customer. " Provide Service Delivery work installing new cell site equipment from channel card elements up to complete new cell site installs. " Develop proficiency with use of relevant wireless tools and test equipment. " Develop proficiency with inventory tools and procedures. " Able to trouble shoot AC and DC power systems including tower light controllers. " Meet expectations with regards to behavioral and administrative facets of the position. " Basic Microwave principals EXPERIENCE and QUALIFICATIONS: " Vocational Skills and procedural knowledge, typically gained through a combination of education and relevant experience totaling up to 2 years post-high school or equivalent. " Ability to multi-task and maintain composure in stressful and demanding work environment. " Ability to exercise flexibility and resourcefulness (with assistance from others) in challenging and/or perplexing situations. " Confirmation of travel requirement - 100% for Technicians but flexible to travel outside of market for weeks at a time if required (e.g. disaster recovery, new product roll-out, etc). " Must be able to work outside of normal business hours (ie: shift work), to include maintenance window and weekends if needed. 24/7 On Call may be required. " Ability to identify all colors associated with telecommunications cable and equipment indicator lights. " Basic computer skills. " A valid driver's license and the ability to drive long distances on and off road. A CDL classification may be required for some vehicles. " Will need to transport equipment, therefore, vehicle with appropriate carrying capacity will be needed. " Ability to lift and carry up to 50 lbs. " Ability to climb ladders and steep staircases. " Ability to work in remote and challenging locations including, but not limited to: rooftops, vaults, and all types of geographic locations. " The dexterity to connect and disconnect various sizes and types of electronic connectors. " Good oral and written communications skills. Personal vehicle required. " Familiarity with field operations specific trouble ticket and network database systems. " Previous experience working wireless networking system. " Travel required.

Responsibilities: Our construction equipment group is seeking a full-time A/C and Lube system Field Technician / mechanic for our Tampa, FL location. The primary responsibilities of the position consist of, but are not limited to: Complete inspections Removal and installation of parts Implementation of optional accessories Maintenance On the road doing basic diagnosis and troubleshooting Testing General A/C, lube system and Telematic repairs on the road Driving company truck to different customers location Upkeep of the service truck Responsible for the inventory of onboard parts Incorporate Alta's Guiding Principles into daily activities Performs other duties as assigned Consistent, regular, and reliable attendance including being ready for work at the designated start time We encourage our Technicians to participate in our in-house training program, allowing them to acquire additional skills in diagnosis and troubleshooting and further advance their career as a Technician. Also, company uniforms are provided! Qualifications: Desired Skills and Qualifications: Excellent mechanical aptitude with a solid understanding of the following systems: A/C, Telematics, Auto lube systems. Possess own tools A positive attitude and high energy Computer programs - Microsoft Outlook, Volvo VCADS Language Skills - Intermediate: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Mathematical Skills - Basic: Ability to add and subtract two digit numbers and to multiply and divide with 10's and 100's. Ability to perform these operations using units of American money and weight measurement, volume, and distance. Reasoning Ability - Intermediate: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Physical Demands/Work Environment: Physical/Sensory Functions: Regularly will stand, walk, use hands, reach with hands; Frequently will talk/hear, climb or balance, stoop, kneel, crouch or crawl; Occasionally will sit. Lift and/or Move Functions: Regularly will lift up to 25 pounds; Frequently will lift 26 to 50 pounds; Occasionally will lift from 51 to 100 plus pounds. Work Environment: Regularly will work near moving mechanical parts; Frequently will be exposed to fumes or airborne particles, outdoor weather conditions, under extreme heat or cold; Occasionally will work in wet or humid conditions (non-weather), risk of electrical shock, vibration.

DescriptionField Service Engineer - Physical Measurements Salary: $79,000 - $81,000 per year Who are we? Established in 1975, Shimadzu Scientific Instruments is one of the largest suppliers of analytical instrumentation, physical testing, and environmental monitoring systems in the world. Ground-breaking scientific research, manufacturing ideas and results continue to propel Shimazu's outstanding reputation and "Excellence in Science." People dedicated to our mission have the largest impact on Shimadzu's continued growth and success. Would YOU like to join a diverse team of professionals working together with researchers, scientists and manufacturers to help better lives worldwide? What can Shimadzu offer YOU? Our Culture - A work environment that values diversity, inclusion & belonging Competitive Compensation - Day 1 Benefits & Competitive Salary Retirement Benefits - Matching 401K & Profit-Sharing Program Professional Growth - Clear pathways for Career, Leadership and Personal Development Health Benefits - Flexible Spending/Health Savings Accounts Work-Life Balance - Generous & Front-Loaded Paid Time Off Plan Education - Tuition Assistance Program for both graduate and undergraduate levels Insurance Perks - Pet Insurance, optional Identity theft, legal pre-paid and critical care buy-up insurance benefits, generous company paid life insurance & short-term disability programs Work Flexibility - Business casual Dress Attire & casual (jeans) Friday! Employee Engagement - Employee Resource Groups to network, build a sense of community and enhance one's career and personal development ADDITIONAL COMPENSATION: For Service, Technical Support, Marketing & Sales Roles: Additional compensation is available through either an Incentive and/or Commission Plan. For Employees who reside in Connecticut, Massachusetts, New Jersey and California: Additional compensation is offered through a Cost-of-Living Adjustment (COLA) Shimadzu Scientific Instruments is seeking a Physical Measurements Service Specialist to join our team and play a key role in providing exceptional service and support for our physical measurement instrumentation. In this position, you will be responsible for a wide range of service-related functions, including the repair, maintenance, installation, and after-hours phone support for Shimadzu products. JOB FUNCTIONS INCLUDE, BUT ARE NOT LIMITED TO: Provide daily repair, maintenance, calibration and installation support for physical measurement instruments. Perform in-house bench repairs as needed while primarily handling field service calls with limited supervision. Travel within the local region and other regions if needed (including day and overnight trips) to support customer needs. Offer technical support via phone to customers and field personnel regarding repairs, maintenance and installations. Provide training to customers and internal personnel on proper instrument operation and maintenance. Accurately document all repairs, product failures, and improvements to ensure compliance with company standards. Assist in the development and execution of preventative maintenance procedures for instruments. Maintain and control repair parts inventory in the assigned region. EDUCATION AND QUALIFICATIONS: Bachelor's degree in Material Science, Engineering, or a related field; or equivalent experience. At least 1 year of experience (2+ years preferred) in field support of physical measurement instrumentation; UTM, Hardness testers, X-Ray, or similar products. Strong technical knowledge and understanding of physical measurement instruments such as testing machines, or similar products. Excellent communication and customer relations skills. Ability to travel within the assigned territory, including overnight stays as needed. Ability to troubleshoot complex instrumentation issues and provide effective solutions. At Shimadzu Scientific Instruments, we believe in providing structured career paths that recognize and reward talent. If your expertise surpasses the level specified in the listed position, we offer the flexibility to upgrade positions to better suit your qualifications accompanied by a salary adjustment. Compensation & Benefits: This full-time, non-exempt position comes with a comprehensive benefits package. In your first year, you will receive 10 paid vacation days, 8 paid personal days, 8 paid scheduled holidays and 3 paid floating holidays (Residents of California and Puerto Rico will receive state-mandated sick leave instead of personal days). After one year of employment, you will also be eligible for a generous short-term disability program with the company covering 100% of monthly premiums. The starting salary range for this role is $79,000 to $81,000 annually, paid semi-monthly. As a non-exempt position, you will be eligible for overtime and double time pay, as outlined in our employee handbook. Additional variable compensation includes an incentive plan based on company and service performance, paid semi-annually in April and October. A year-end discretionary bonus may also be awarded based on overall company performance. This position includes a company car with a fuel card (with a $55 per pay deduction for personal use) and a company-paid cell phone, which remains company property but can be used for personal purposes. For more details on benefits, please visit ************************** Shimadzu is not accepting unsolicited assistance from search firms for this employment opportunity. Please, no phone calls or emails. All resumes submitted by search firms to any employee at Shimadzu via email, the Internet or in any form and/or method without a valid written search agreement in place for this position (and agency was requested to work the requisition) will be deemed the sole property of Shimadzu. No fee will be paid in the event the candidate is hired by Shimadzu as a result of the referral or through other means. EEO Statement: Shimadzu Scientific Instruments (SSI) is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, citizenship, color, family or medical care leave, gender identity or expression, genetic information, immigration status, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran or military status, race, ethnicity, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable local laws, regulations and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application process, please click here . Qualifications BehaviorsFunctional Expert - Considered a thought leader on a subject Detail Oriented - Capable of carrying out a given task with all details necessary to get the task done well Innovative - Consistently introduces new ideas and demonstrates original thinking Team Player - Works well as a member of a group Thought Provoking - Capable of making others think deeply on a subject EducationBachelors of Material Science (required) Skills Instrument Repair (required) Instrument- Physical Testing (required) Instrument- Hardness Testers (required) Instrument- X-Ray (required) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Since 1986, Advanced Refrigeration & Air has been a leader in commercial refrigeration and air conditioning. Based in Orlando, Florida, our family-owned company operates across five locations in the state. For over 35 years, we have provided top-tier service to grocery retailers, restaurants, and businesses throughout Florida, Georgia, and Alabama. We are looking for a Service Technician, Supermarket Refrigeration - Sarasota with expertise in Commercial HVAC, Supermarket, and Rack Refrigeration. If you excel in installing, maintaining, and repairing commercial refrigeration and HVAC systems, we want you to join our Sarasota team! Responsibilities of a Service Technician, Supermarket Refrigeration - Sarasota: Accurately document maintenance and repair activities. Communicate effectively with clients to provide excellent service and address their needs. Conduct thorough inspections to identify potential problems early and enhance equipment efficiency. Diagnose and repair commercial refrigeration systems, including walk-in coolers, freezers, ice machines, display cases, and HVAC units. Follow safety protocols to maintain a safe working environment. Perform routine maintenance tasks such as coil cleaning, filter replacement, and refrigerant level checks. Use advanced diagnostic tools to troubleshoot electrical and mechanical issues with precision. Qualifications: Ability to work on-call and rotating shifts. Capable of working independently as well as part of a team. Clean driving record and valid driver's license. EPA Universal Certification for refrigerant handling. Knowledgeable in electrical and mechanical systems. Physically able to lift heavy equipment and work in varied environments. Proficient in using specialized diagnostic and repair tools. Strong experience with commercial refrigeration systems and troubleshooting. What We Offer: Medical, Dental, Vision & Voluntary Coverages Retirement Plans - 401(k) with Company Match Paid Holidays & Vacation Career Growth Opportunities Company Vehicle & Cell Phone Equipment & Tools On-the-Job Training - - For more information, please visit our company website at: ************** Our company was featured in the Orlando Family Magazine. You can visit the article link at: ***********************************************************************

**Our promise to you:** Joining AdventHealth is about being part of something bigger. It's about belonging to a community that believes in the wholeness of each person, and serves to uplift others in body, mind and spirit. AdventHealth is a place where you can thrive professionally, and grow spiritually, by Extending the Healing Ministry of Christ. Where you will be valued for who you are and the unique experiences you bring to our purpose-minded team. All while understanding that **together** we are even better. **All the benefits and perks you need for you and your family:** + Benefits from Day One: Medical, Dental, Vision Insurance, Life Insurance, Disability Insurance + Paid Time Off from Day One + 403-B Retirement Plan + 4 Weeks 100% Paid Parental Leave + Career Development + Whole Person Well-being Resources + Mental Health Resources and Support + Pet Benefits **Schedule:** Full time **Shift:** Night (United States of America) **Address:** 9330 US HIGHWAY 301 S **City:** RIVERVIEW **State:** Florida **Postal Code:** 33578 **Job Description:** Rounds with previous shift staff to receive report on care given to patients. Delivers care using the mission, vision, and value statements, incorporating patient-centric behaviors daily. Promotes timely patient placement by following hospital policy for patient admission, discharge, and transfer. Provides care to patients in accordance with standards of care, including assistance with hygiene, comfort, and activities of daily living. Maintains patient skin integrity by turning and repositioning patients, preventing skin shearing, and notifying nurses of skin breakdown. Performs various medical procedures such as urine specimen collection, splinting, crutch adjustment, urinary catheter removal, dressing changes, accucheks, hemocults, nasogastric tube discontinuation, IV catheter removal, phlebotomy, and Foley bag emptying. Documents patient care according to policy, including intake and output, vital signs, weights, activities of daily living, and specimen collection. Transports patients, medical records, and equipment within scheduled time frames, and assists in positioning, lifting, and ambulating patients using safety precautions. Supports nutritional needs of patients by providing liquids, assisting with meal setup, and feeding patients within identified restrictions. Other duties as assigned. Introduces self to patient, explains role in patient's care, and calls patient by preferred name. Follows hospital policy for patient identification, uses universal precautions, and maintains a clean and uncluttered patient environment. **The expertise and experiences you'll need to succeed:** **QUALIFICATION REQUIREMENTS:** High School Grad or EquivBasic Life Support - CPR Cert (BLS) - RQI Resuscitation Quality Improvement, Certified Medical Assistant (CMA) - EV Accredited Issuing Body, Certified Nurse Assistant (CNA) - EV Accredited Issuing Body, Certified Patient Care Technician/Assistant (CPCT/A) - EV Accredited Issuing Body, Emergency Medical Tech Cert (EMT) - EV Accredited Issuing Body **Pay Range:** $16.14 - $25.83 _This facility is an equal opportunity employer and complies with federal, state and local anti-discrimination laws, regulations and ordinances._ **Category:** Medical Assistant & Technician Services **Organization:** AdventHealth Riverview **Schedule:** Full time **Shift:** Night **Req ID:** 150658992

Coke Florida is looking for a Lead Cooler Service Technician based out of our Sarasota location. We're currently looking for 1:00PM to 9:30PM working Sunday through Thursday. What You Will Do: As a Coke Florida Cooler Service Technician Lead, you will be responsible for performing mechanical services on cold drink equipment at customer accounts. Lead cooler service technicians will assist with the coaching, training, development, and onboarding of new members of the cooler service teams. Roles and Responsibilities: Maneuver equipment in order to perform all mechanical services on cold drink equipment including preventative maintenance Keep all refrigeration equipment in proper operating condition Maintain positive customer relationships Prepare equipment in accordance with company standards Ensure vehicle has appropriate levels of parts inventory Maintain clean and safe work area Backfill and support for Field Service Supervisor's paid time off Advanced trouble shooting and subject matter expert for Freestyle, McDonalds, vending, coolers, credit card readers, and legacy fountain equipment Conduct and verify inventory on technician vehicles (same as Field Service Supervisor) Accident investigation point person when Field Service Supervisor is unavailable Take on special assignments and projects as directed by Field Service supervisor, i.e., parts to be added for new customers; set section, shelf, bin on technician vehicles; review Excess and Obsolete parts inventory Backup and/or point person for resolving CCNA disputed invoices Work in cross functional groups to seek resolution to customer issues (dispatch, parts, CCNA) Train and support sales associates in basic equipment knowledge Monday-Friday Hour vary between 8:30am -10:30pm Position requires flexibility. Weekends and holidays may be required (schedule rotation) Must follow all Company/DOT vehicle policies. Smith-System, Geotab, Lytx (Dashcams), etc. For this role, you will need: High school diploma or GED required 1+ years of general technical experience required Prior diagnostic troubleshooting Demonstrated mechanical, technical and electrical aptitude Basic computer and analytical skills Valid driver's license and driving record within MVR policy guidelines * Major moving violations include, but are not limited to, leaving the scene of an accident, driving under the influence, and reckless driving. Minor moving violations include, but are not limited to, speeding, driving too close, failure to stop, and improper lane changes. Driving records, including minor moving violations, will be evaluated according to Coke Florida guidelines to determine eligibility for the position. Additional qualifications that will make you successful in this role: Refrigeration/HVAC trade or vocational certification preferred 1+ years of refrigeration/HVAC experience preferred Plumbing experience preferred HVAC certification preferred CCNA fundamentals certification preferred

at Whaley Foodservice ***HIRING IMMEDIATELY!!!**** ***Sign On Bonus Available for Qualified Service Technicians*** Whaley Foodservice, LLC is one of the largest commercial kitchen equipment repair service companies in the Southeast comprised of over 600 employees located across 31 geographically dispersed locations.Visit "Whaley Careers" to find your place to grow. ********************************* Pay Rate: $31.00-39.00/hour* At Whaley we know people are vital to our success. We offer a competitive salary, on-call pay, and generous benefits including Sign-On Bonuses for Experienced Technicians Company Vehicle | Mobile Device | Uniforms Meters & Test Equipment Industry Certification 401k & Profit Sharing Paid Holidays & Vacation Medical & Dental Benefits Short-Term Disability | Long-Term Disability Insurance (company paid) Life Insurance (company paid) To learn more about current opportunities, visit Whaley Careers: ********************************* Summary: The Service Technician II provides maintenance, service, and repair for commercial cooking equipment and commercial refrigeration i.e. grills, fryers, ovens, ice machines, reach-in and walk-in coolers, freezers, etc. Details Diagnoses, troubleshoots, and repairs commercial cooking kitchen equipment, refrigeration. Communicates status updates for part order(s) and repairs with branch support and customer. Completes service calls accurately and timely. Audits truck stock to ensure required parts are stocked. Ensures service vehicle, tools, and uniforms are consistent with Whaley standards of safety. Meets on-call requirements. Required Education | Experience Three years of experience in commercial kitchen repair and or refrigeration. Must be 18 years of age. Completion of a satisfactory background check and drug screen is required. Valid Driver's license and driving record that aligns with our safety standard. Skills and Abilities Ability to work independently Ability to accurately diagnose and troubleshoot: an automotive, electrical, installation, and mechanical background is a plus. Journeyman License and or CFESA certification not required but would be a plus. Strong attention to detail. Excellent communication and soft skills. Good driving record Whaley Foodservice is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Hi, Greetings Hope you are doing great! I would like to update you on an urgent open position with our esteemed client. Please go through the Job Description. Send me your updated resume and expected rate for the below position Role: Technology Lead - Java , Web services (Interview on 19th August) Duration: Full Time Location: Tampa, FL, Dallas, TX, Jersey City, NJ Qualifications Basic • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technologies. Preferred • At least 4 years of experience with Java, J2EE, JQuery, HTML5, JavaScript, CSS3, XML, Web services, Spring MVC, Struts • At least 4 years of experience in translating functional/non-functional requirements to system requirements At least 4 years of experience in software development life cycle activities on development and maintenance projects. • At least 4 years of experience in Design and architecture review. • Ability to work in team environment and client interfacing skills • Ability to work in team in diverse/ multiple stakeholder environment • At least 2 years of experience in Financial Services domain • Problem Solving and Analytical skills • Experience and desire to work in a Global delivery environment Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

Job Description Future Infrastructure, a Primoris Company, is hiring fiber optic trainees in Sarasota, FL. This position is responsible for performing specialized technical duties in the repair, maintenance, and installation of customer's fiber optic networks. Duties and responsibilities • Responds to emergency and non-emergency repair calls regarding all aspects of our customers OSP fiber optic network. • Performs construction, splicing, distribution changes of OSP and ISP fiber optic cables. • Performs tests on OSP and ISP networks to troubleshoot problems. • Makes necessary repairs on the OSP and ISP facilities once problem is identified. • Assures network is functioning properly before leaving customer site. • Assists in maintaining inventory and notifies appropriate personnel when materials need to be ordered. • Night shift work is required due to the nature of maintenance windows. • This position will be subject to call outs to meet service requirements. • Weekend and holiday work may be required as service demands dictate. • The work consists of related technical duties and is considered complex. • Fiber optic construction and splicing can be complex, and skills should be kept up to date. • The purpose of this position is to perform specialized technical duties in the repair, maintenance, construction and splicing of our customers fiber optic networks. Qualifications • Ability to read, write and perform mathematical calculations at a level commonly associated with the completion of • high school or equivalent. -Sufficient experience to understand the basic principles relevant to the major duties of • the position usually associated with the completion of an apprenticeship/internship or having had a similar position for one to two years. • Computer Skills: Proficient with Microsoft Office; Bluebeam; Microsoft Outlook; Google Earth • OSHA 10 - (to be completed within 90 days of employment) Working conditions The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to outside weather conditions. The employee is frequently exposed to moving mechanical parts. The employee is exposed to fumes or airborne particles, drilling materials, extreme cold, extreme heat, risk of electrical shock and vibration. The noise level in the work environment is usually moderate to loud. Physical requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit; use hands to handle or feel and talk or hear. The employee is frequently required to reach with hands and arms. The employee is occasionally required to stand; walk and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 1O pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus Physical Requirements: Must be able to lift up to 75 lbs. Education: High School diploma or GED Benefits: Our Company offers Medical, Dental, Vision Insurance, Life Insurance, 401K, Paid Holidays and Paid Vacation EEO Statement: We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Third Party Agency Notice: Primoris will not accept any unsolicited resumes from any third-party recruiting agencies either domestic or international. Primoris nor its subsidiaries will be responsible for any fees from the use of any unsolicited resumes either through our ATS or via electronic mail systems from any agency representative or agency consultant unless your firm is an approved vendor partner with a current executed agreement.About Primoris Primoris Services Corporation (Primoris) is ranked in the top 10% of the prestigious Top 600 Specialty Contractors List by Engineering News Record (ENR), having built projects throughout the United States as well as Latin America, South and Central America, and Southeast Asia. Powered by JazzHR p2HDnHV08C

Description ***HIRING IMMEDIATELY!!!**** ***Sign On Bonus Available for Qualified Service Technicians*** Whaley Foodservice, LLC is one of the largest commercial kitchen equipment repair service companies in the Southeast comprised of over 600 employees located across 31 geographically dispersed locations.Visit "Whaley Careers" to find your place to grow. ********************************* Pay Rate: $31.00-39.00/hour* At Whaley we know people are vital to our success. We offer a competitive salary, on-call pay, and generous benefits including Sign-On Bonuses for Experienced Technicians Company Vehicle | Mobile Device | Uniforms Meters & Test Equipment Industry Certification 401k & Profit Sharing Paid Holidays & Vacation Medical & Dental Benefits Short-Term Disability | Long-Term Disability Insurance (company paid) Life Insurance (company paid) To learn more about current opportunities, visit Whaley Careers: ********************************* Summary: The Service Technician II provides maintenance, service, and repair for commercial cooking equipment and commercial refrigeration i.e. grills, fryers, ovens, ice machines, reach-in and walk-in coolers, freezers, etc. Details Diagnoses, troubleshoots, and repairs commercial cooking kitchen equipment, refrigeration. Communicates status updates for part order(s) and repairs with branch support and customer. Completes service calls accurately and timely. Audits truck stock to ensure required parts are stocked. Ensures service vehicle, tools, and uniforms are consistent with Whaley standards of safety. Meets on-call requirements. Required Education | Experience Three years of experience in commercial kitchen repair and or refrigeration. Must be 18 years of age. Completion of a satisfactory background check and drug screen is required. Valid Driver's license and driving record that aligns with our safety standard. Skills and Abilities Ability to work independently Ability to accurately diagnose and troubleshoot: an automotive, electrical, installation, and mechanical background is a plus. Journeyman License and or CFESA certification not required but would be a plus. Strong attention to detail. Excellent communication and soft skills. Good driving record Whaley Foodservice is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Build your best future with the Johnson Controls team As a global leader in smart, healthy and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support many industries worldwide. You will have the opportunity to develop yourself through meaningful service work and learning opportunities. We strive to provide our employees with experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer · Competitive salary · Paid vacation/holidays/sick time- 10 days of vacation first year · Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one · Encouraging and collaborative team environment · Dedication to safety through our Zero Harm policy · Check us out!: ******************* ZMNrDJviY What you will do Under minimal supervision, conducts preventive maintenance, repair, installation, and commissioning and general servicing of systems (including detailed troubleshooting of systems). Responsible for high levels of customer satisfaction through direct, on site, customer interface. With a high level of complete technical competence, mentors control technicians, service technicians and mechanical technicians on building automation activities. Properly completes required project and service documentation. Provide our customers with the highest level of service to solve building inefficiencies and resolve service-related items. As a trusted advisor to our customers, you will provide solutions and outcomes at the time of service How you will do it o Diagnoses and repairs complex control systems malfunctions requiring extensive knowledge of a variety of electronic or digital controls systems and ability to test and write modifications in multiple languages of systems software. o Consults with the customer through data gathered and site assessments. Provides field proposals for retrofits, upgrades and or enhancements to existing equipment. Assists sales by providing technical recommendations for sales leads. o Manages assigned work to meet professional and efficient execution of time and customer satisfaction. Reports problems or changes to management immediately. Interfaces with branch manager, service manager, service project manager or subcontractors on projects to coordinate activities as required ethically and professionally. o Provides sketches of field changes and discrepancies for engineering corrections and drawings. May assist with job layouts and bid proposals. o Install and modify software and graphics. o Communicates with customers upon arrival and before leaving the work site. Ensures high levels of customer satisfaction. Meets regularly with customers to become familiar with operating problems. Keeps customer informed on the service provided, outstanding issues and recommends system enhancements, upgrades, and replacement. Promotes the sale of add-on work. o Adheres to all Johnson Controls and customer safety standards. Provides safety leadership and instruction to all control's technicians in the branch. Provides safety awareness while working onsite with Johnson Controls subcontractors. o Trains the customer in control systems operations. Delivers manuals and documentation to the customer for training needs as required. o Provides mentorship for certification of Controls Technicians and Service Technicians on complex building automation systems. Coaches, supports and trains the technical workforce on non-complex, non-critical equipment. o Compiles job documentation, such as certificate of completion, customer training form, training certificates and punch lists. o Conducts extensive self-study (reading, research and practice) to improve and maintain technical proficiency in company's product lines. Completes certifications as required by the company. o Other duties related to the installing, commissioning and servicing of building controls and facilities management systems and energy management systems, as assigned. o Assists in the design and configuration of building control systems as defined by the contract documents. Creates flow diagrams, sequence of operations, and bill of material, network layouts and electrical schematics as required. o Assists in developing and testing software programs necessary to operate the system per the project requirements' intent. o Compiles and/or completes project as built and close-out documentation. o Assists in the coordination and creation of necessary drawings and equipment schedules for submittals and installation. o Selects, orders, and tracks the delivery of materials for assigned. o Assists in the loading and commissioning of all system and network-level controllers as required. Assists in validation of complete system functionality and troubleshoots problems with subcontractors and other trades to ensure proper operation. o May provide field change information to the project team for the creation of as-built drawings and software. o Keeps management and JCI contractor or customer informed of job progress and issues. o Assists in performing site-specific training for owner / operator on the total building control system. o Participates in release meeting with project field team. o Provide recommendations and solutions to ensure facility is running efficiently to include upselling opportunities. o Provide quotes to support recommendations and solutions. What we look for Required o Be a dedicated member of a North America Branch team willing to learn and be responsible for system trouble shooting, repair and aftermarket services for this fast-growing business. o Minimum of Six (6) years Commercial Controls troubleshooting experience in the HVAC industry. This includes buildings, chiller plants and systems. o Vocational School program graduate or associate's degree in a technical field, or two years' experience in servicing electronic and or mechanical systems. o Demonstrated ability to install and/or service electronic control systems and HVAC equipment. o Effective communication skills to represent Johnson Controls on customer sites. o Possesses the ability to explain technical information to technical and non-technical people. o Demonstrate effective writing skills as well as understanding of programs and software applications. o Knowledge of control theory, automatic temperature controls, building automation systems and other building subsystems. HIRING HOURLY RANGE: $26.92 - $35.55 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Since 2012, we've grown to become one of the leading single-family rental companies and homebuilders in the country, recently recognized as a top employer by Fortune and Great Place To Work. At AMH, our goal is to simplify the experience of leasing a home through professional management and maintenance support, so our residents can focus on what really matters to them, wherever they are in life. We're looking for a dedicated Field Technician Maintenance to join our team. You'll perform a range of duties, including repairs, troubleshooting, installation, and maintenance at AMH properties, ensuring the functionality and condition of our homes while maintaining a clean and safe work environment. Responsibilities: Provide troubleshooting support for water heater, plumbing, garage door, irrigation, and electrical issues. Perform various home repairs, including, carpentry, drywall, roofing, and fencing tasks. Ensure HVAC systems are operational and perform system tune-ups. Maintain all equipment in a clean, orderly, and functional condition. Update and complete mobile work orders received from the maintenance center within the given timeframe. Regularly engages with vendors and tenants. Requirements: High School diploma/GED is preferred, and an Associate degree or technical training certification is a plus. Minimum two years of experience in Residential/Property Maintenance or related field is required, or five years of experience in lieu of education. Valid driver's license required. Familiarity with basic hand tools and power tools is necessary. Experience with an Apple iPad and HVAC preferred. Universal EPA Certification or HVAC Type II Certification required in applicable states. Proficiency in Microsoft Office (Word, Excel, Outlook) is necessary. Knowledge of occupational hazards and safety methods (OSHA) is required. Excellent verbal and written communication, time management, and problem-solving skills are essential. Ability to multitask, exercise discretion and independent judgement, work in a team environment, pay close attention to details, and adapt to a changing environment. Proficiency in English, basic measurement and calculations, and the ability to physically maneuver 300 lbs. are necessary. Be comfortable lifting/carrying: 75 pounds to waist height, 75 pounds to shoulder height, 20 pounds above the head. Capable to operate a motor vehicle and climb ladders (A-frame and extension ladders) to perform tasks such as tree trimming and removal of debris and leaves from roof gutters. Compensation The anticipated pay range/scale for this position is $28.00 - $32.00 hourly. Actual starting base pay within this range will depend on factors including geographic location, education, training, skills, and relevant experience. Additional Compensation This position is eligible to receive quarterly bonus payments. Perks and Benefits Employees have the opportunity to participate in medical, dental and vision insurance; flexible spending accounts and/or health savings accounts; dependent savings accounts; 401(k) with company matching contributions; employee stock purchase plan; and a tuition reimbursement program. The Company provides 9 paid holidays per year, and, upon hire, new employees will accrue paid time off (PTO) at a rate of 0.0577 hours of PTO per hour worked, up to a maximum of 120 hours per year. CA Privacy Notice: To learn more about what information we collect when you apply for a job, and how we use that information, please see our CA Job Applicant Privacy Notice found at ************************************** #LI-DNP

Service Technicians are responsible for performing shop and/or field repairs, maintenance service and troubleshooting of air compressors and its components. Essential Job Functions Perform technical skills including but not limited to, mechanical, electrical, troubleshooting and repair of compressed air systems and accessories Provide emergency/unscheduled repairs of compressed air systems and/or accessories both during normal working hours and after-hours, weekends, and holidays as directed Perform scheduled preventative maintenance service and/or repairs of compressed air systems and/or accessories Read and interpret operational manuals, electrical schematics, general compressed air equipment literature, and work orders to perform required maintenance and/or repairs Perform basic mathematical calculations; including but not limited to, totaling work orders and basic compressed air formulas Use a variety of hand and power tools, electric meters and material handling equipment in performing duties Detect faulty operations, defective material and report them and any other unusual situations to the service manager in a timely manner Comply with safety regulations and maintain clean and orderly shop work areas, company vehicles, and job site work areas Drive company vehicle to and from job sites throughout the day. Overnight travel by land and/or air may be required on occasion Additional Job Functions May perform work requiring the use of welding tools, winch, pulley, hoist and/or pallet jack May be required to tow a trailer or portable air compressor using Company vehicle Experience and Skills Required Knowledge, Skills and Abilities (including physical and work environment) Working knowledge of compressed air systems and its components, including knowledge of the mechanical operation, associated hazards, and proper usage of the equipment Ability to interpret schematics and operational manuals for practical application on repair and maintenance tasks Working knowledge of fundamental mathematical operations Ability to take preventative safety measures to avoid electrical shock, limit exposure to loud noises, and prevent personal injury by using personal protective equipment, including the use of NFPA 70E protective equipment when applicable Skilled usage of mechanical tools utilized to repair and maintain compressed air systems and their components Ability to perform duties in non-climate controlled environments such as outdoor weather conditions and non-weather related wet, humid and/or extreme heat conditions Position requires extended periods of standing, extended periods of sitting while driving, as well as bending, pulling, pushing, reaching, kneeling, squatting and the use of hands to finger, handle and feel Ability to lift and/or move heavy objects up to 100 lbs throught the work day Minimum Job Qualifications (education, work experience, licenses/certifications) High School or equivalent (GED) 5 to 7 years of related work experience or training or equivalent combination of both education and experience Motor Vehicle Record must be in good standing and comply with Company policy Job Benefits ACF Corporation offers a comprehensive benefits package including medical, dental, 401k with company match, disability and life insurance, paid time off, paid holidays. Service technicians who qualify will be provided a company vehicle, fuel card, uniforms, tablet, and smartphone for company use. In addition to base pay, there is a bonus program as well as up-selling bonus opportunities for eligible technicians.

Regional Travel Required Field Technician Level 1 - Job Description Position involves performing basic, often supervised, installation and maintenance tasks in telecommunications central offices, focusing on the physical aspects like running cables, racking equipment, and initial site preparation. This level requires familiarity with basic tools and equipment, the ability to work under direction, perform continuity testing, maintain clean work areas, and adhere to safety procedures. Responsibilities & Duties- Installation and Physical Tasks: Physically install, remove, and modify telecommunications equipment and infrastructure. Run and dress copper and fiber optic cables, ensuring proper lacing and stitching. Install basic racking and equipment. Testing and Verification: Conduct lead verification and continuity testing on cables and connections. Perform basic network cable testing. Tools and Safety: Use various hand and power tools. Adhere to and enforce safety policies and OSHA regulations. Work Area Management: Maintain a clean and organized work area. Participate in site preparation and restoration, including waste disposal. Collaboration and Documentation: Work effectively with engineers, technicians, and customers. Maintain basic on-site job records and administrative tracking. Skills Required for Skill Level 1 Mechanical Aptitude: Ability to use hand and power tools efficiently and safely. Manual Dexterity: Precision in tasks like cable installation and lacing. Basic Knowledge: Understanding of telecom tools, equipment, and physical installation processes. Teamwork: Ability to work effectively as part of a team and follow instructions. Physical Stamina: Capacity to lift objects, stand for extended periods, and work in various environments -on ladders and cable racks. Reliability: Punctuality, dependability, and a strong work ethic. What to Expect This is an entry-level role within a skill-based framework. It often involves physically demanding work and requires adherence to detailed installation standards. Progressing to higher skill levels requires gaining more experience and proficiency in advanced tasks and troubleshooting.

Our promise to you: Joining AdventHealth is about being part of something bigger. It's about belonging to a community that believes in the wholeness of each person, and serves to uplift others in body, mind and spirit. AdventHealth is a place where you can thrive professionally, and grow spiritually, by Extending the Healing Ministry of Christ. Where you will be valued for who you are and the unique experiences you bring to our purpose-minded team. All while understanding that together we are even better. All the benefits and perks you need for you and your family: * Benefits from Day One: Medical, Dental, Vision Insurance, Life Insurance, Disability Insurance * Paid Time Off from Day One * 403-B Retirement Plan * 4 Weeks 100% Paid Parental Leave * Career Development * Whole Person Well-being Resources * Mental Health Resources and Support * Pet Benefits Schedule: Full time Shift: Night (United States of America) Address: 9330 US HIGHWAY 301 S City: RIVERVIEW State: Florida Postal Code: 33578 Job Description: Rounds with previous shift staff to receive report on care given to patients. Delivers care using the mission, vision, and value statements, incorporating patient-centric behaviors daily. Promotes timely patient placement by following hospital policy for patient admission, discharge, and transfer. Provides care to patients in accordance with standards of care, including assistance with hygiene, comfort, and activities of daily living. Maintains patient skin integrity by turning and repositioning patients, preventing skin shearing, and notifying nurses of skin breakdown. Performs various medical procedures such as urine specimen collection, splinting, crutch adjustment, urinary catheter removal, dressing changes, accucheks, hemocults, nasogastric tube discontinuation, IV catheter removal, phlebotomy, and Foley bag emptying. Documents patient care according to policy, including intake and output, vital signs, weights, activities of daily living, and specimen collection. Transports patients, medical records, and equipment within scheduled time frames, and assists in positioning, lifting, and ambulating patients using safety precautions. Supports nutritional needs of patients by providing liquids, assisting with meal setup, and feeding patients within identified restrictions. Other duties as assigned. Introduces self to patient, explains role in patient's care, and calls patient by preferred name. Follows hospital policy for patient identification, uses universal precautions, and maintains a clean and uncluttered patient environment. The expertise and experiences you'll need to succeed: QUALIFICATION REQUIREMENTS: High School Grad or EquivBasic Life Support - CPR Cert (BLS) - RQI Resuscitation Quality Improvement, Certified Medical Assistant (CMA) - EV Accredited Issuing Body, Certified Nurse Assistant (CNA) - EV Accredited Issuing Body, Certified Patient Care Technician/Assistant (CPCT/A) - EV Accredited Issuing Body, Emergency Medical Tech Cert (EMT) - EV Accredited Issuing Body Pay Range: $16.14 - $25.83 This facility is an equal opportunity employer and complies with federal, state and local anti-discrimination laws, regulations and ordinances.

Future Infrastructure, a Primoris Company, is hiring fiber optic trainees in Sarasota, FL. This position is responsible for performing specialized technical duties in the repair, maintenance, and installation of customer's fiber optic networks. Duties and responsibilities • Responds to emergency and non-emergency repair calls regarding all aspects of our customers OSP fiber optic network. • Performs construction, splicing, distribution changes of OSP and ISP fiber optic cables. • Performs tests on OSP and ISP networks to troubleshoot problems. • Makes necessary repairs on the OSP and ISP facilities once problem is identified. • Assures network is functioning properly before leaving customer site. • Assists in maintaining inventory and notifies appropriate personnel when materials need to be ordered. • Night shift work is required due to the nature of maintenance windows. • This position will be subject to call outs to meet service requirements. • Weekend and holiday work may be required as service demands dictate. • The work consists of related technical duties and is considered complex. • Fiber optic construction and splicing can be complex, and skills should be kept up to date. • The purpose of this position is to perform specialized technical duties in the repair, maintenance, construction and splicing of our customers fiber optic networks. Qualifications • Ability to read, write and perform mathematical calculations at a level commonly associated with the completion of • high school or equivalent. -Sufficient experience to understand the basic principles relevant to the major duties of • the position usually associated with the completion of an apprenticeship/internship or having had a similar position for one to two years. • Computer Skills: Proficient with Microsoft Office; Bluebeam; Microsoft Outlook; Google Earth • OSHA 10 - (to be completed within 90 days of employment) Working conditions The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to outside weather conditions. The employee is frequently exposed to moving mechanical parts. The employee is exposed to fumes or airborne particles, drilling materials, extreme cold, extreme heat, risk of electrical shock and vibration. The noise level in the work environment is usually moderate to loud. Physical requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this Job, the employee is regularly required to sit; use hands to handle or feel and talk or hear. The employee is frequently required to reach with hands and arms. The employee is occasionally required to stand; walk and stoop, kneel, crouch, or crawl. The employee must frequently lift and/or move up to 1O pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus Physical Requirements: Must be able to lift up to 75 lbs. Education: High School diploma or GED Benefits: Our Company offers Medical, Dental, Vision Insurance, Life Insurance, 401K, Paid Holidays and Paid Vacation EEO Statement: We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Third Party Agency Notice: Primoris will not accept any unsolicited resumes from any third-party recruiting agencies either domestic or international. Primoris nor its subsidiaries will be responsible for any fees from the use of any unsolicited resumes either through our ATS or via electronic mail systems from any agency representative or agency consultant unless your firm is an approved vendor partner with a current executed agreement.About Primoris Primoris Services Corporation (Primoris) is ranked in the top 10% of the prestigious Top 600 Specialty Contractors List by Engineering News Record (ENR), having built projects throughout the United States as well as Latin America, South and Central America, and Southeast Asia.

Description ***HIRING IMMEDIATELY!!!**** ***Sign On Bonus Available for Qualified Service Technicians*** Whaley Foodservice, LLC is one of the largest commercial kitchen equipment repair service companies in the Southeast comprised of over 600 employees located across 31 geographically dispersed locations.Visit "Whaley Careers" to find your place to grow. ********************************* Pay Rate: $31.00-39.00/hour* At Whaley we know people are vital to our success. We offer a competitive salary, on-call pay, and generous benefits including Sign-On Bonuses for Experienced Technicians Company Vehicle | Mobile Device | Uniforms Meters & Test Equipment Industry Certification 401k & Profit Sharing Paid Holidays & Vacation Medical & Dental Benefits Short-Term Disability | Long-Term Disability Insurance (company paid) Life Insurance (company paid) Enjoy the benefits of our Town Shares Program - share in our company's success! To learn more about current opportunities, visit Whaley Careers: ********************************* Summary: The Service Technician II provides maintenance, service, and repair for commercial cooking equipment and commercial refrigeration i.e. grills, fryers, ovens, ice machines, reach-in and walk-in coolers, freezers, etc. Details Diagnoses, troubleshoots, and repairs commercial cooking kitchen equipment, refrigeration. Communicates status updates for part order(s) and repairs with branch support and customer. Completes service calls accurately and timely. Audits truck stock to ensure required parts are stocked. Ensures service vehicle, tools, and uniforms are consistent with Whaley standards of safety. Meets on-call requirements. Required Education | Experience Three years of experience in commercial kitchen repair and or refrigeration. Must be 18 years of age. Completion of a satisfactory background check and drug screen is required. Valid Driver's license and driving record that aligns with our safety standard. Skills and Abilities Ability to work independently Ability to accurately diagnose and troubleshoot: an automotive, electrical, installation, and mechanical background is a plus. Journeyman License and or CFESA certification not required but would be a plus. Strong attention to detail. Excellent communication and soft skills. Good driving record Whaley Foodservice is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

at Whaley Foodservice ***HIRING IMMEDIATELY!!!**** ***Sign On Bonus Available for Qualified Service Technicians*** Whaley Foodservice, LLC is one of the largest commercial kitchen equipment repair service companies in the Southeast comprised of over 600 employees located across 31 geographically dispersed locations.Visit "Whaley Careers" to find your place to grow. ********************************* Pay Rate: $31.00-39.00/hour* At Whaley we know people are vital to our success. We offer a competitive salary, on-call pay, and generous benefits including Sign-On Bonuses for Experienced Technicians Company Vehicle | Mobile Device | Uniforms Meters & Test Equipment Industry Certification 401k & Profit Sharing Paid Holidays & Vacation Medical & Dental Benefits Short-Term Disability | Long-Term Disability Insurance (company paid) Life Insurance (company paid) To learn more about current opportunities, visit Whaley Careers: ********************************* Summary: The Service Technician II provides maintenance, service, and repair for commercial cooking equipment and commercial refrigeration i.e. grills, fryers, ovens, ice machines, reach-in and walk-in coolers, freezers, etc. Details Diagnoses, troubleshoots, and repairs commercial cooking kitchen equipment, refrigeration. Communicates status updates for part order(s) and repairs with branch support and customer. Completes service calls accurately and timely. Audits truck stock to ensure required parts are stocked. Ensures service vehicle, tools, and uniforms are consistent with Whaley standards of safety. Meets on-call requirements. Required Education | Experience Three years of experience in commercial kitchen repair and or refrigeration. Must be 18 years of age. Completion of a satisfactory background check and drug screen is required. Valid Driver's license and driving record that aligns with our safety standard. Skills and Abilities Ability to work independently Ability to accurately diagnose and troubleshoot: an automotive, electrical, installation, and mechanical background is a plus. Journeyman License and or CFESA certification not required but would be a plus. Strong attention to detail. Excellent communication and soft skills. Good driving record Whaley Foodservice is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.