Manufacturing technician jobs in Baileys Crossroads, VA - 272 jobs

The TSUBAKI name is synonymous with excellence in quality, dependability, and customer service. U.S. Tsubaki is a leading manufacturer and supplier of power transmission and motion control products. As a part of a vast, international network of corporate and industrial resources, Tsubaki offers its customers the finest state-of-the-art products available in the world and we strive to be the “Best Value” supplier in the industry. Essential Duties and Responsibilities: Operate a wide range of machinery to fabricate, process, and assemble chain and other operations associated to ensure that all processes are maintained and run to the high levels of efficiency and quality stipulated by US Tsubaki standards. Primarily responsible for the operation of a complete range of: grinders, drilling machines, ballizers, semi-automatic equipment, power presses, and packaging equipment, or other operations associated with the fabrication, processing, or assembly of pins, bushings, rolls, side plates, attachments, and all other chain related components. No set-up skills are required. Able to measure all quality parameters of assembled and unassembled chain components and determine corrective action where appropriate to the processes concerned. Retrieve and replace components from parts storage or prior processes to ensure continuous operation of equipment. Requirements: Must have the ability to learn to operate simple production equipment with minimal amount of instruction. Basic numeric and writing skills are essential. High level of dexterity and flexible nature essential. Requires sufficient knowledge of all types of production equipment for example: grinders, drilling machines, ballizers, automatic equipment, semi-automatic equipment, power presses, greasing, and packaging equipment, and tooling required, to maintain close tolerances and work specifications. Self-motivated to take ownership of work schedule and quality. Continuous improvement: Willing to accept change to support being a Fast - Flexible - Efficient section. Must be a team player - capable of working with peers and supervisors both inside and outside the section in order to satisfy the needs of internal and external customers. Make decisions in order to perform a variety of tasks having timely constraints. Follow directions / instructions of group leader or supervisor. Able to work in any fabrication, processing, assembly, and warehouse section when and where needed. Capable of handling heavy weights. Tsubaki is an Equal Opportunity Employer - Minorities/Females/Veterans/Disability PM21 Compensation details: 20.54-23.65 Hourly Wage PIacbe56fd933d-30***********2

Production Operator I - III (Solid Dosage/OSD Manufacturing) Manufacturing Job Type: Full-time Shift Availability 1st Shift: 7:00 am - 3:30 pm EST 2nd Shift: 3:00 pm - 11:30 pm EST Training: Must be available for training from 8:30 am - 5:00 pm EST for one month. Job Summary The Production Operator is responsible for tasks associated with drug product processing, ensuring adherence to current Good Manufacturing Practices (cGMPs), customer specifications, and Standard Operating Procedures (SOPs). Tasks may vary in complexity, scope, and sequence, and the role requires recognizing issues to improve efficiency, throughput, and quality. Operators manage production schedules and contribute to troubleshooting process issues, ensuring safe, efficient operations. Key Responsibilities Production Operate pharmaceutical production machinery, following procedures for manufacturing activities such as weighing, blending, dispensing, mixing, granulating, drying, compressing, and encapsulating. Adhere to SOPs to ensure material purity and proper equipment usage. Verify materials against Product ID Labels, QC release tags, and Batch Production Records. Clean and perform machine changeovers, conduct in-process product quality checks, and document results accurately. Follow assigned schedules and participate in debriefs to address any production issues. Documentation Maintain accurate documentation of manufacturing processes in batch records, logbooks, and protocols. Complete and attach verification tickets, updating status boards as needed. Continuous Improvement Assist in troubleshooting, participate in improvement projects, and address deviations with the supervisor. Safety & Compliance Comply with all cGMP, SOP, policy, and safety requirements. Participate in safety meetings and maintain a clean, organized work area. Training Fulfill all training requirements, including machine-specific training. Teamwork & Collaboration Share knowledge with team members, contributing to the overall success of projects and initiatives. Requirements Trainee - Level I Operator: High school diploma, GED, or Associate Degree. 1-3 years of experience in a physically demanding environment. Proficiency in English (verbal and written). Level II Operator (OSD/Solid Dose Manufacturing Experience Required) High school diploma, GED, or Associate Degree. 3-7 years of experience in OSD pharmaceutical manufacturing. Forklift certification may be required for specific roles. Level III Operator (OSD/Solid Dose Manufacturing Experience Required) High school diploma, GED, or Associate Degree. 7+ years of pharmaceutical manufacturing experience, with relevant certification or demonstrated proficiency. Required Knowledge & Skills For Levels II & III Experience in solid dose manufacturing (OSD) and equipment operation. Proficiency in areas like Compression, Granulation, Encapsulation, Coating, etc. Familiarity with FDA regulations, GMP, Lean Manufacturing, and Six Sigma principles. Basic math, reading, and problem-solving skills. Ability to participate in Continuous Improvement projects. Physical Requirements Ability to stand for extended periods, lift at least 50 pounds, climb ladders, wear a respirator, and all required PPE (safety glasses, earplugs, safety shoes). Apply if you're eager to contribute to high-quality production in a regulated environment with opportunities for growth. Send us an email to ************************ and tell me why you're interested.

L3Harris is dedicated to recruiting and developing high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. L3Harris provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. L3Harris Technologies is the Trusted Disruptor in the defense industry. With customers' mission-critical needs always in mind, our employees deliver end-to-end technology solutions connecting the space, air, land, sea and cyber domains in the interest of national security. Job Title: Specialist, Manufacturing Engineer Job Code: 32309 Job Location: Ashburn, VA Job Schedule: 9/80: Employees work 9 out of every 14 days - totaling 80 hours worked - and have every other Friday off Job Description: L3Harris is searching for a Manufacturing Engineer to support the Unmanned Systems business in Ashburn, VA. This role is responsible for solving manufacturing problems with innovative solutions and driving continuous improvement in our manufacturing processes, be a key part of the Integrated Product Team to develop and execute manufacturing plans, and collaborating with other engineering disciplines, program management, quality assurance, and manufacturing. This role is apart of the Agile Development Group which is a division that specializes in developing disruptive, next-generation technologies for advanced Unmanned Air Systems (UAS / UAV), advanced radar systems, next-generation weapon systems, and other RF sensor technologies using small company agility and big company experience. Essential Functions: Investigate and implement alternate/new manufacturing processes and technologies for emerging programs. Provide key technical input on all product designs for manufacturing ease and cost considerations. This includes analyzing different design approaches and manufacturing methods. Examine early assembly prototyping/testing to provide feedback in the design process. Identify and justify capital equipment needs for capacity and capability expansion Provide technical mentorship for team in areas of expertise Contribute to CAM and IPT activities Initiate and review manufacturing workflow and processes/procedures such as: Work/assembly instructions Rework and modification instructions Travelers/routers Special process instructions Standard repair instructions Review and approve drawings for the Manufacturing Department (i.e. sign off authority). Communicate information between the design and manufacturing teams and ensure that design feedback from manufacturing is relayed to engineering. Lead and support Lean Manufacturing initiatives in the organization such as 5S, Tool Control, etc. Up to 5% travel may be required Ability to obtain and maintain a DoD clearance Qualifications: Bachelor's Degree and minimum 4 years of prior relevant experience. Graduate Degree and a minimum of 2 years of prior related experience. In lieu of a degree, minimum of 8 years of prior related experience. Preferred Additional Skills: Masters degree in relevant engineering field or related field and/or equivalent experience desired Experience and knowledge of manufacturing methods, specifically in composites, metals, and electronics. Experience leading small teams Experience with technical writing, specifically work instructions and process documentation. Experience in aviation or military systems manufacturing Experience with creating and presenting performance metrics. Experience with Capital Equipment justification and BOEs Excellent people skills to include collaborating in a multi-disciplinary, diverse, and dynamic team environment Excellent communication skills (written, verbal, & presentation) Experience in a 3D CAD software. Experience in Creo is preferred Experience with Power BI or data analytics Experience/certification in lean practices; 5S, six sigma #LI-KT1 L3Harris Technologies is proud to be an Equal Opportunity Employer. L3Harris is committed to treating all employees and applicants for employment with respect and dignity and maintaining a workplace that is free from unlawful discrimination. All applicants will be considered for employment without regard to race, color, religion, age, national origin, ancestry, ethnicity, gender (including pregnancy, childbirth, breastfeeding or other related medical conditions), gender identity, gender expression, sexual orientation, marital status, veteran status, disability, genetic information, citizenship status, characteristic or membership in any other group protected by federal, state or local laws. L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. By submitting your resume for this position, you understand and agree that L3Harris Technologies may share your resume, as well as any other related personal information or documentation you provide, with its subsidiaries and affiliated companies for the purpose of considering you for other available positions. L3Harris Technologies is an E-Verify Employer. Please click here for the E-Verify Poster in English or Spanish . For information regarding your Right To Work, please click here for English or Spanish .

Senior Hiring Specialist - Civil Engineering & Architecture We're looking for a Senior Consultant to join our Workforce Strategy team in Washington, DC. In this role, you'll partner with executives across engineering and architecture firms to help them attract, hire, and retain top talent. You'll oversee and execute high-level strategic searches, advise clients on employee engagement and development practices, and build lasting relationships with career professionals across the AEC industry. This role is ideal for someone who loves connecting people with purpose, understands the nuances of talent in a technical industry, and wants to make a tangible impact on how firms grow and lead their teams. Why DesignForce? At DesignForce, we're a hardworking, passionate, and collaborative team united by one mission - to elevate the employee experience in the AEC industry. As a proud Certified B Corporation, we're guided by principles of social responsibility, ethics, and impact. We balance purpose and fun, with a culture that celebrates connection and creativity through happy hours, team bonding events ( sip-and-paint nights, bowling, paintball, escape rooms, axe throwing and more), and biweekly catered lunches. Our biweekly internal trainings reflect our deep commitment to innovation and continuous learning, we're always looking for ways to elevate our people and our work. We bring high energy and fresh ideas to everything we do, working in a flexible hybrid environment out of our vibrant, modern office in Dupont Circle. Core Responsibilities Include: Develop and foster long-term relationships with professionals in the design and building industries, assisting them with their career development. Provide personalized career coaching sessions for professionals within the Architecture, Interiors, Engineering, Development and Construction fields. Assist with the development and execution of workforce strategy initiatives, including 360-performance reviews, strategic planning, benefits benchmarking, compensation analysis, and employee engagement surveys. Partner strategically with organizational leaders and hiring managers to proactively assess talent needs, providing expert guidance to shape workforce planning and ensure alignment with both immediate and long-term business objectives. Source talent and continue to build and enhance an active National network through various channels like LinkedIn, social media, and industry networking events. Aid in the development and facilitation of high impact learning and development workshops. Research and write industry-specific blog articles to promote DesignForce and personal brand. Preferred Qualifications Include: Hold a BA or BS in Communications, Human Resources, Psychology, Architecture, Interior Design, Civil Engineering, or a related field. 4+ professional years of experience, with a strong preference of 2+ years being focused in talent acquisition, recruiting, human resources, career coaching, design, engineering consulting, or a related field. Display exemplary communication capabilities, effectively communicating verbally and through writing. Demonstrate strong ownership of your workload by proactively managing client and internal team relationships, independently establishing realistic deadlines, and consistently delivering results that meet or exceed the highest standards of excellence. Be able to pivot quickly and adapt to change in a fast-paced, high-energy environment. Love food. Seriously. We like to eat. (Specific knowledge about the DC food scene is a plus but not a requirement). Additional Information - We Take Care of Our People by Providing the Following Benefits: Generous Paid Time Off (PTO) & Paid Holidays Paid Voting & Wellness Leave Annual Professional Development Budget Paid Parental Leave On-Site Gym Membership Comprehensive Medical, Dental, and Vision Coverage 401(k) with Matching Quarterly Team Volunteering Outings Professional Development Support Bi-Weekly Catered Team Lunch Equal Opportunity Employer At DesignForce, we don't just accept difference - we celebrate, support, and thrive because of it. DesignForce is a proud equal-opportunity employer. Employment at DesignForce is based solely on a person's merit and qualifications directly related to professional competence. DesignForce does not discriminate against any employee or applicant because of race, creed, color, religion, gender, sexual orientation, gender identity/expression, national origin, disability, age, genetic information, veteran status, marital status, pregnancy, or related condition (including breastfeeding), or any other basis protected by law.

This position will oversee production lines and staff to ensure timely and efficient work flow, while meeting finished product specifications. In this role, will also partner with Quality Assurance to ensure quality standards are met, and will track labor and raw product yields. Accountabilities: Communicate with Production staff and management team to ensure proper follow through on duties. Perform product inventory cycle counts as directed. Maintain accurate documentation for food safety purposes. Advise management of unsafe conditions and provide recommendations for improvement. Communicate well (both written and verbal) with management, as well as direct employees in a productive/professional manner. Assist with scheduling of work teams, and initiate short and long-term plans with Production Management. Assist with training of employees and ensure they are provided ongoing skills development and coaching, to improve job performance. Assess daily and weekly output, identify issues in productivity, and manage the allocation of people and equipment, to address day-to-day variations in demand and capacity, across assigned lines. Perform tasks as related to position of production employee when needed. Flexible-Willing to move around within department or to different shifts. Any other accountability will be discussed at the time of the interview. Will be required to stay later if needed. Minimum Skills Required: High School Diploma or equivalent, from an accredited institution. Knowledge of Microsoft Office programs (i.e. Word, Excel, and Outlook, etc.). At least 1 year prior experience in a similar role in a production environment. Strong analytical and organizational skills. Must be able to communicate well (both written and verbal) with management as well as direct employees in a productive/professional manner. Must be able to work in a production area which includes noise, equipment moving, sharp utensils, wet, and cold ( Strong attention to detail and problem solving abilities. Preferred: Hazard Analysis & Critical Control Points (HACCP) experience. Fork Lift and/or Electric pallet jack experience. Bi-lingual: English and Spanish Food Experience (Fresh Fruit) ***Please note: This position does not qualify for relocation expenses. *** Fresh Del Monte Produce Inc. is a global leader in the production, distribution, and marketing of fresh and fresh-cut fruits and vegetables. Our diverse product portfolio also includes prepared fruits and vegetables, juices, beverages, snacks, and desserts-available in over 80 countries worldwide. With operations spanning more than 35 countries, we've proudly been nourishing families for over 135 years. We are committed to maintaining a drug-free workplace and are proud to be an Equal Opportunity Employer. Fresh Del Monte and its affiliates do not discriminate based on race, color, religion, national origin, age, disability, gender, veteran status, or any other characteristic protected by applicable law. We also participate in E-Verify* where applicable, to ensure employment authorization eligibility. Driven by our core values-Excellence, Care, Passion, Trust, and Creativity-we invite you to explore our career opportunities and join our FRESH team.

Piper Health and Sciences is seeking a skilled and motivated Manufacturing Associate II to join a biopharmaceutical company in the Gaithersburg, MD area. The Manufacturing Associate II is a crucial role in supporting the downstream manufacturing team. This position involves operating and maintaining downstream processing equipment, performing filtration and chromatography techniques and supporting production activities in a cleanroom environment. Responsibilities of the Manufacturing Associate II: * Execute manufacturing of drug product following GMP guidelines * Perform buffer and media preparation for downstream processing. * Operate and maintain chromatography systems for protein purification. * Conduct tangential flow filtration (TFF) and viral filtration to ensure product purity. * Perform aseptic processing in a clean room environment, adhering to strict contamination control measures. * Maintain accurate documentation of manufacturing activities in compliance with GMP regulations. * Troubleshoot and resolve issues related to downstream processing equipment. Qualifications of the Manufacturing Associate II: * 3+ years of professional experience working in a GMP environment (Biotechnology or Pharmaceutical organization) with 1+ years of experience working in downstream manufacturing * Experience performing chromatography, filtration techniques, aseptic processing, TFF (tangential flow filtration) * Experience demonstrating aseptic technique and ability to work in a BSC (biological safety cabinet) * Understanding of cGMP (current Good Manufacturing Practices) * Bachelor's degree in science related field Compensation for the Manufacturing Associate II: * Salary: $52,000 - $70,000 annually, commensurate with experience * Comprehensive Benefits: Medical, Dental, Vision (through Cigna), 401k, Sick leave required as by law, PTO, Holidays This job opens for applications on 1/8/2025. Applications for this job will be accepted for at least 30 days from the posting date. Keywords: Manufacturing, manufacturing associate, GMP, good manufacturing practice, cGMP, current good manufacturing practice, TFF, filtration, downstream manufacturing, upstream manufacturing, central service, chromatography skids, process development, facilities, biological safety cabinet, BSC, FDA, biotech, biotechnology, pharmaceutical, pharma, biopharmaceutical, QC, quality control, batch record, SOP, standard operating procedure, log book, equipment calibration, equipment maintenance, autoclave, solution prep, buffer, reagent, sanitize, filter, cell culture, fill finish, column packing, skids, manufacturing, MFG, manufacturing specialist, biopharmaceutical associate, bioprocess associate, manufacturing technical associate, cell therapy, downstream, upstream, Allstream, support service, central service, all stream, cleanroom #LI-BN1 #LI-ONSITE

*MUST BE ABLE TO MANUFRACTURE CABLE HARNESS* Our client is looking for a manufacturing specialist in northern Virginia (DC area). 1 to 3 years of experience is required for this position. Each applicant must be able to solder and manufacture cable harness. You will be responsible for managing production assembly, fabrication of materials, test operations including set-up calibration and operation of machines used in the production process, and manufacturing engineering. Duties may include ensuring that high-quality manufacturing production operations happens on schedule and within the cost objective. Job Type: Contract Salary: $29.00 - $32.00 per hour Schedule: 8 hour shift Monday to Friday Ability to commute/relocate: Sterling, VA: Reliably commute or planning to relocate before starting work (Required) Experience: Manufacturing: 1 year (Preferred)

About the Job The IV Production Technician prepares all medication for compounding performs IV preparation under sterile technique and packages medication for distribution for ordering entity according to policy and procedure manual. Primary Duties and Responsibilities * Accurately compounds and completes mixing of TPN in the appropriate timeframe as set forth by the productivity standards. * Accurately prepares all medication according to the mixing report prepared by the pharmacist utilizing good compounding technique. Labels patient specific medications for inspection by pharmacist. Records lot numbers and expiration dates on mixing reports for all dispenses. * Completes set up of TPN compounder according to policy and procedure for inspection by pharmacists. * Contributes to the achievement of established department goals and objectives and adheres to department policies procedures quality standards and safety standards. Complies with governmental and accreditation regulations. * Maintains daily production logs as outlined in the Policy and Procedure manual. Consistently signs off processes that will validate medications produced. * Maintains department facilities equipment and materials through cleaning and signs off processes that will validate accurate operation. * Participates in the on-call rotation and rotates to the prep area room as requested. * Participates in the ongoing review maintenance and revision of the CIVAC policy and procedures. * Performs other duties as assigned. * Receives all bins into the clean room for compounding and prioritizes mixing of medications. * Records data in Simplifi-797 including but not limited to temperature monitoring (incubator refrigerators and freezers) cleaning activities. Minimal Qualifications Education * High School Diploma or GED required or equivalent required Experience * 6 months experience working in a pharmacy required and * 1-2 years Pharmacy technician experience in a retail or hospital setting preferred Licenses and Certifications * Registered technician in Maryland and has achieved pharmacy technician certification through a nationally accredited certification examination (such as PTCB) required This position has a hiring range of USD $19.55 - USD $34.25 /Hr. General Summary of Position The IV Production Technician prepares all medication for compounding performs IV preparation under sterile technique and packages medication for distribution for ordering entity according to policy and procedure manual. Primary Duties and Responsibilities * Accurately compounds and completes mixing of TPN in the appropriate timeframe as set forth by the productivity standards. * Accurately prepares all medication according to the mixing report prepared by the pharmacist utilizing good compounding technique. Labels patient specific medications for inspection by pharmacist. Records lot numbers and expiration dates on mixing reports for all dispenses. * Completes set up of TPN compounder according to policy and procedure for inspection by pharmacists. * Contributes to the achievement of established department goals and objectives and adheres to department policies procedures quality standards and safety standards. Complies with governmental and accreditation regulations. * Maintains daily production logs as outlined in the Policy and Procedure manual. Consistently signs off processes that will validate medications produced. * Maintains department facilities equipment and materials through cleaning and signs off processes that will validate accurate operation. * Participates in the on-call rotation and rotates to the prep area room as requested. * Participates in the ongoing review maintenance and revision of the CIVAC policy and procedures. * Performs other duties as assigned. * Receives all bins into the clean room for compounding and prioritizes mixing of medications. * Records data in Simplifi-797 including but not limited to temperature monitoring (incubator refrigerators and freezers) cleaning activities. Minimal Qualifications Education * High School Diploma or GED required or equivalent required Experience * 6 months experience working in a pharmacy required and * 1-2 years Pharmacy technician experience in a retail or hospital setting preferred Licenses and Certifications * Registered technician in Maryland and has achieved pharmacy technician certification through a nationally accredited certification examination (such as PTCB) required

About the Job The IV Production Technician prepares all medication for compounding performs IV preparation under sterile technique and packages medication for distribution for ordering entity according to policy and procedure manual. Primary Duties and Responsibilities * Accurately compounds and completes mixing of TPN in the appropriate timeframe as set forth by the productivity standards. * Accurately prepares all medication according to the mixing report prepared by the pharmacist utilizing good compounding technique. Labels patient specific medications for inspection by pharmacist. Records lot numbers and expiration dates on mixing reports for all dispenses. * Completes set up of TPN compounder according to policy and procedure for inspection by pharmacists. * Contributes to the achievement of established department goals and objectives and adheres to department policies procedures quality standards and safety standards. Complies with governmental and accreditation regulations. * Maintains daily production logs as outlined in the Policy and Procedure manual. Consistently signs off processes that will validate medications produced. * Maintains department facilities equipment and materials through cleaning and signs off processes that will validate accurate operation. * Participates in the on-call rotation and rotates to the prep area room as requested. * Participates in the ongoing review maintenance and revision of the CIVAC policy and procedures. * Performs other duties as assigned. * Receives all bins into the clean room for compounding and prioritizes mixing of medications. * Records data in Simplifi-797 including but not limited to temperature monitoring (incubator refrigerators and freezers) cleaning activities. Minimal Qualifications Education * High School Diploma or GED required or equivalent required Experience * 6 months experience working in a pharmacy required and * 1-2 years Pharmacy technician experience in a retail or hospital setting preferred Licenses and Certifications * Registered technician in Maryland and has achieved pharmacy technician certification through a nationally accredited certification examination (such as PTCB) required This position has a hiring range of USD $19.55 - USD $34.25 /Hr.

Your Role: This position is responsible for manufacture of biologics (LV) under cGMP conditions. Staff must follow established procedures, execute batch production records using good documentation practices and adhere to gowning procedures required for work in cleanroom environment. Essential Duties and Responsibilities: Adhere to clean room Standard Operational Procedures (SOPs) for gowning, traffic flows, modes of operation. Complete successful gowning aseptic processes qualification. Follow batch record instruction and complete GMP documentation. Responsible for the proper use of production equipment in strict accordance with cGMPs, SOPs and safety policies. Responsible for cleaning of equipment and work areas as required. Assist in the revision and review of established documentation (SOP's, BPR's). Maintain inventory and restock supplies when needed. Complete Purchase Order Requests. Requirements: High School degree with 0-6 months of related experience. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to walk; use hands to finger, handle, or feel; reach with hands and arms, talk, and hear. The employee is required to stand; climb or balance and stoop, kneel, crouch. The employee must occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception and ability to adjust focus. Must have ability to handle more than one task at a time and must work at a rapid pace while maintaining attention to detail. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. This job is performed in a temperature-controlled facility without exposure to extreme hot or cold temperatures. Generally, this job is performed in a sanitized laboratory setting and routinely uses standard medical and research equipment such as centrifuges, biosafety cabinets, chromatography devices and columns, Prodigy equipment, sterile sealers, sterile welders, tangential-flow filtration devices and filters, peristaltic pumps and metering fill pumps, handle blood products, use liquid nitrogen equipment, pipettes and computers. While performing the duties of this job, the employee is frequently exposed to cultured human cells (immortalized and primary) and lentivirus-derived vector particles. Employees entering and leaving the laboratory must wear appropriate clothing and protective equipment such as scrubs, coveralls, masks, glasses and gloves. The noise level in the work environment is usually moderate. The hiring range for this position is expected to fall between $21.68-$25.52/hour, reflecting the range candidates can reasonably expect to be considered for at time of offer, based on factors such as experience, internal equity, and qualifications. The salary of the finalist(s) selected for this role will be set based on a variety of considerations, including but not limited to internal equity, experience, education, specialization, skills, abilities, and training. The above range represents the Company's good faith and reasonable estimate of possible compensation at the time of posting. In addition to your salary, the Company offers a comprehensive benefits package, including health, vision, and dental insurance, as well as a 401(k) plan. All benefits are subject to eligibility requirements. Certain positions may also be eligible for additional compensation such as bonuses or commissions. Miltenyi Biotec is an EO Employer - M/F/Veteran/Disability/Sexual Orientation/Gender Identity. Miltenyi Biotec, Inc. participates in E-Verify. Are you ready to start revolutionizing biomedical research? When you join Miltenyi Biotec, you join a family that is passionate about making a real impact - one breakthrough at a time. One integral division of that Miltenyi Biotec family is Miltenyi Bioindustry - our contract development and manufacturing organization (CDMO). As a full-scale CDMO, we provide customers with services for the development and manufacturing of lentiviral vectors and cell and gene therapy products. This crucial arm of our enterprise bridges the gap between research and mass bioproduction, ensuring that our solutions are accessible on a global scale. Miltenyi Bioindustry plays a unique role as both the producer and the service provider, relying on our instruments and reagents for each workflow step, controlling the entire supply chain and thus delivering greater security and planning clarity to our customers.

Hours: Flexible/Part-Time, 20-40hrs per week Salary:1099 status @ $18-22/hr with eligibility to convert to full-time salaried with benefits.OUR MISSION To tackle the growing e-waste problem, Molg enables circular manufacturing with robotics and design. Its robotic microfactories can autonomously disassemble complex electronic products, and the team partners with leading manufacturers to design electronics with reuse in mind - ensuring one product's end is another's new beginning. Molg combines advanced robotics and intelligent software to transform how electronics are manufactured and recovered. Working with partners like HP, leading hyperscalers, and industrial companies such as ABB and Stanley Black & Decker, Molg's solutions recover valuable materials from existing devices while helping create the next generation of products optimized for circularity. This dual focus on recovery and design innovation drives Molg's mission to keep materials in use and reduce waste. IN THIS ROLE YOU WILL: As a Robotics Manufacturing Technician, you will work alongside a collaborative, cross-functional team, gaining hands-on experience across manufacturing, robotics, and research & development (R&D). This role offers exposure to advanced technologies including robotic microfactories, machine assembly, 3D printing, CNC and manual machining, and robotic system validation. Technicians will play a vital role in building and testing Molg's cutting-edge microfactories and may be asked to specialize as the organization scales. This is a high-impact role suited for individuals who enjoy solving technical challenges, working with advanced machinery, and helping shape the future of circular manufacturing. Duties will include but not limited to: Manufacturing & Assembly: Assemble robotic microfactory systems by following detailed Standard Operating Procedures (SOPs) Organize tools, materials, and workstations to support efficient and safe manufacturing processes Perform quality assurance checks on assemblies using defined protocols and documentation standards Support the development and testing of SOPs for new products and releases. Support inventory management to accurately track and store materials and finished goods. 3D Printing & Prototyping Execute 3D printing jobs based on digital design files for prototypes and functional tools Based on skills, experience, and interest, operate manual and CNC machines to support fabrication of components and parts. Robotics & Systems Testing Conduct pre-deployment testing of robotic systems across various automated demanufacturing workflows. Document test and system performance. Deployment Support Prepare microfactory systems for shipment, including packaging, labeling, and logistics coordination Travel to customer sites to install, reassemble, test, and validate microfactories Provide support during on-site handover, including technical demonstrations and training Responsibilities may be tailored to qualified applicants' experience and interests. Likewise, we seek to provide opportunities through this role for Technicians to specialize and learn specific skill sets of interest to them. WHO YOU ARE: Interest in building and implementing support systems for complex robotic systems. Education or 1-2 years experience in manufacturing technology/advanced manufacturing, mechatronics, or automation. Students pursuing relevant degrees interested in part-time, hands-on experience are encouraged to apply for this role as well. Familiarity with standard manufacturing tools and hardware, 3D printing technology, and basic inspection instruments. Experience with or interest learning to operate CNC machines is a plus. Ability to collect and analyze data and problem solve to suggest creative solutions. Fluency in English and ability to communicate effectively and efficiently both verbally and in writing. Availability for limited travel preferred. Unsponsored right to work in the United States This position is in a manufacturing environment and requires: Standing for extended periods of time throughout the work shift. Lifting and carrying up to 40 pounds on a regular basis. Climbing and working from ladders as needed. Frequent bending, reaching, and manual handling of materials. Ability to perform tasks safely in a fast-paced production setting. WHO WE ARE: We spend our days building robotic systems, developing complex assembly intelligence software, and designing the next generation of circular products for our customers. Given the importance of working hands-on with physical systems, we are a 100% in-person team collaboratively working in our industrial space in Dulles, VA, down the road from the largest data center market in the world. Our facility includes a variety of robots, CNC milling machines, 3D printers, and all the tools needed to build and test our products. It is important to us that anyone on our team that is interested in learning how to use our various pieces of equipment and machinery is taught and can gain the skills and appreciation for making physical things. THINGS TO KNOW: We're a small collaborative team with big ambitions, and there's a good amount of context-switching. We expect people to be autonomous and drive their own work to completion. We are a profitable business that is primarily funded from customer revenue, which means we are scrappy and looking to build a great sustainable company for years to come. As a growing company and startup, priorities may shift as customer or business requirements change. We strive to empower individuals with context and decision-making power to meet this need.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **JOB REQUIREMENTS:** + 5 + years' experience in manufacturing/production environment + Overtime required when needed + Electro-Mechanical experience with: + - Schematic reading and comprehension (Mechanical and Electrical) + - Measuring tools (Multi-meters, Continuity testers, tape measure, calipers, etc.) + - Hand tools (Wrenches, Screwdrivers, Torque tools, Small power tool **PREFERRED:** + Associated degree in electronic field + Certifications (Current or Non-Current) + - IPC-610 + - IPC-620 + - J-Standard 001 + Quality controlled environment **JOB DUTIES:** + Assemble mechanical parts, as instructed in accordance to manufacturing documentation (assembly· instructions, process documents, travelers, etc.) into sub-units or complete units. + Mechanical assembly concepts to include gear and motor drive assembly\ + Wire electronic components as instructed in accordance to manufacturing documentation (assembly + Assembles parts into sub-units or complete units, including sub-assembly, process assembly, inspection, modifications, upgrades and rework. + - Completes production/quality related documentation + - Cable and Panel wiring + - Performs work in accordance with quality and engineering standards + - Responsible for inspecting and testing their own work before moving to next routing step + - Keep work area clean and organized as to present a professional work environment + - Other duties as assignedinstructions, process documents, travelers, etc.) into sub-units or complete units **CORE COMPETENCIES:** + Oral and Written Communication + Team Player + Good Organization skills + General housekeeping in responsibility, maintaining an organized & professional work area **EXPERIENCE:** + 1-3 Years of relevant experience in the below areas: + Mechanical assembly concepts to include gear and motor drive assembly + Assembly and repair of various termination types (Crimp and Solder) + Electro-Mechanical assembly + Schematic reading and comprehension (Mechanical and Electrical) + Testing equipment (multi-meters, power supplies, load banks, signal generators, oscilloscope etc.) + Hand tools (Wrenches, Screwdrivers, Torque tools, small power tools) + ISO controlled environment **EDUCATION PREFERENCE:** + Associates degree or higher in an electronic or networking field + Lean Manufacturing + Automotive Service Excellence (ASE) Certifications + IPC-610 and/or J-STD-001 Certifications **CORE COMPETENCIES:** + Technical Capacity + Oral and Written Communication + Team Player + Shows Initiative + Good Organization skills and incredibly detailed oriented + General housekeeping in responsibility, maintaining an organized & professional work area Applicants must be either a U.S. citizen, U.S. national, legal permanent resident, asylee, refugee or must be eligible to apply for and obtain the appropriate export control license from the U.S. Departments of State or Commerce. \#FLIR **Salary Range:** $40,900.00-$54,500.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Job Description Who we are: Maravai LifeSciences translates extraordinary science into everyday miracles, helping biotech, biopharma, and life sciences companies everywhere deliver novel vaccines, therapeutics, and diagnostics. We are global leaders in providing products and services within the fields of nucleic acid production and biologics safety testing to many of the world's leading biopharma, vaccine, diagnostics, and cell and gene therapy companies. At Maravai, we believe that diverse perspectives are the foundation of innovation. Through an inclusive and equitable culture where every team member is inspired to bring their best selves to work, we cultivate an environment in which we can lead together, providing differentiated value to our customers, and enabling the miracles of science. For over 35 years, Maravai's portfolio companies have served as a catalyst for innovative, lifesaving technology for humanity. Pioneering nucleotide research since its inception, we are now leading the way in the rapidly expanding mRNA market. Your next role as a Miracle Maker Maravai LifeSciences is seeking a #MiracleMaker to join our manufacturing team as a Manufacturing Associate I. The primary role of Manufacturing Associate I is to formulate reagents, package supports, phosphoramidites, and other non-hazardous materials needed for the synthesis and purification of oligonucleotides as well as working with Hazardous materials and knowledge of general chemistry techniques. How you will make an impact: Prepare catalog products using manufacturing instructions, procedures and protocols Associated tasks include packaging, labeling, and storing of product Maintaining inventory of catalog products and raw materials General laboratory maintenance and equipment maintenance Evaluation and cleaning of necessary production glassware Evaluation and assembly of support columns Distribution of products with correct documentation, using good documentation practices. Inspection of finished goods. Fulfill products from stock for customer orders Inspection of completed orders prior to shipment Assist with general shipping and receiving of products and materials Proper storage, handling, and disposal of organic solvents, hazardous chemicals, and waste Perform other functions and duties as required. Work with Hazmats on Daily basis that will require wearing proper PPE at all times. Able to life 50lbs. Making 40-70 liter batches at a time The skills and experience that you will bring: Bachelor's Degree in Chemistry, Biology, or other science preferred. Prior experience in laboratory setting may be evaluated as an alternative to formal education. Must have good communication skills, written and verbal. Must be able to follow written Standard Operating Procedures (SOPs)/Work Instructions (WIs) as well as personalized instruction from leaders. Must be self-motivated and able to work both in a team setting as well as individually. Must be able to work in a fact paced environment without getting overwhelmed. Must be able to perform repetitious activities while maintaining accuracy. Must have excellent attention to detail and be able to perform detail-oriented work requiring fine motor skills. Must be a good timekeeper and ensure prompt arrival to work for each scheduled shift. Must have functional knowledge of Microsoft Office Suite. Experience with FileMaker database and NetSuite ERP software a plus. This is a manufacturing and production based job. No real research is involved. #LI-Onsite The benefits of being a #MiracleMaker: You have the potential to change, improve, and save lives around the world. You have the opportunity to be a part owner in Maravai through RSU grants and optional employee stock purchase plans. We offer comprehensive medical plans and HSA/FSA options. Fertility & family planning assistance. A variety of additional optional benefits and insurance options, including pet insurance. Retirement contributions. Holidays & Paid Time Off. Benefits may vary by region and employment type and do not apply to temporary employees or contractors. See a comprehensive list of benefits at our Benefits & growth site at **************************************************** To view more opportunities to become a #MiracleMaker, visit our career site at ******************************** Maravai LifeSciences is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation, and gender identity, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Click here to view Maravai LifeSciences Privacy Notice HIRING SCAM ALERT Recently, individuals impersonating Maravai LifeSciences Human Resources members have offered fraudulent interviews and job offers to unsuspecting candidates. To help protect you from these scam artists, please be aware that: Maravai LifeSciences will never interview a candidate over RingCentral, similar messaging apps or social media (e.g. Telegram, Google Hangouts, WhatsApp, Facebook Messenger, etc.) Maravai LifeSciences will never send a company check or ask an applicant to pay a fee or purchase at home work/training materials in connection with an application for employment. Maravai LifeSciences will never provide excess money to an applicant and ask the applicant to write a check for repayment. If you have any doubt about a job offer or any other communication purporting to come from Maravai LifeSciences, please reach out to us directly at *****************. If you believe you have been a victim of fraud, you can report this activity at: *********** or ******************

Every day, our team members do amazing things in pursuit of our shared purpose to build trust with our clients, partners, subcontractors, and teammates. No matter your background, education, or career path, if you share our vision to create extraordinary experiences, you belong at HITT. Production Technician Job Description: Formative 3D is a 3D-printing startup on a mission to change the built environment. By leveraging large-format and FDM additive manufacturing, we're building modular, component-based systems that are sustainable and scalable. As we launch our new production facility, we're looking for passionate and dependable, hands-on team members to help us produce our first project and grow the business. We're looking for a reliable and detail-oriented Production Technician to join our manufacturing team. In this role, you'll be responsible for the hands-on tasks that bring our 3D printed furniture to life. From post-processing and assembly to packaging and general shop support. If you enjoy working with your hands, take pride in craftsmanship, and want to be part of a team shaping the future of furniture, we'd love to meet you. Effective the beginning of March 2026, this role will transition from HITT to Formative 3D. Responsibilities * Perform post-processing of 3D printed parts, including hole drilling, sanding, and surface finishing, and post-processing. * Assemble modular furniture components per technical drawings and SOPs. * Package finished products securely and efficiently for shipping. * Assist with general labor tasks such as material handling, shop organization, and equipment upkeep. * Conduct quality checks to ensure parts meet visual and dimensional standards. * Maintain a clean, safe, and organized work environment. * Collaborate with team members to improve workflow and production efficiency. Qualifications * 1+ year of experience in a hands-on production, fabrication, or warehouse role * Comfortable using hand tools, power tools, and basic shop equipment * Strong attention to detail and commitment to quality * Ability to lift up to 50 lbs. and stand for extended periods * Self-motivated, dependable, and eager to learn * Experience with 3D printing (or desire to learn) or furniture assembly is a plus, but not required Physical Demands * Regular movement between production areas, assembly stations, and shipping/receiving * Standing/walking for extended periods while working, up to 8 hours per day, 6 days a week * Regular lifting of materials/equipment (25-50 lbs.) * Exposure to noise, dust, and varying temperatures typical of industrial environments * Use of PPE (safety glasses, gloves, hearing protection) as required. * Open to working weekends Compensation, Healthcare, & Benefits * Compensation commensurate based upon experience * Full suite of healthcare benefits, including medical, dental, and vision * Competitive PTO plans * Competitive retirement plans HITT Contracting is an equal opportunity employer. We are committed to hiring and developing the most qualified individuals based on job-related experience, skills, and merit. All employment decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic. We value a respectful, inclusive workplace where everyone has the opportunity to succeed. HITT Contracting maintains a drug-free workplace, consistent with applicable local, state, and federal laws.

We are looking for Production Operators who will be responsible for operating equipment and ensuring quality output. You will need to take initiatives in maintaining overall production efficiencies of assigned workstations, logging the machines when necessary and communicating to the appropriate personnel. Your responsibilities include supporting a safe work environment by following safety procedures and promptly reporting identified hazards. We encourage applicants with a positive and growth attitude to join our dynamic team! Performs current Production Operator responsibilities and duties within a Fab organization as well as outlined technical tasks. Technical tasks will vary from area to area and may include monitoring and responding to SPC charts, responding to failed tool quals, processing engineering targets, SWRs and other tests, monitoring and collecting data, dispositioning lots, troubleshooting tool errors and recovery and other similar responsibilities. Demonstrate ability to use computer -based programs and applications to perform daily duties. Run equipment based on current process specifications (e.g. procedures, change notifications, etc.). Organize own workstations and ensuring 6S. Make suggestions to improve quality and safety. Participate actively in assigned on -the -job and other required training, asking questions to increase knowledge and abilities. Complete certification requirements by demonstrating understanding and abilities. Receive and understand pass down, providing clear, accurate, and detailed pass down. Seek and provide feedback to leadership, coworker, and support groups to make positive changes in performance. Offer suggestions towards improvements when appropriate. Always seek clarification when in doubt. Identify and promptly report hazards. Follow safety protocols. Use accurate lifting techniques and work in an ergonomically manner Complete Certification and Recertification. 0 -3 years of experience. This is a night shift position, however, the training will be on day shift

Role: Field Production Technician On-Site: Ashburn, Virginia Salary: $60,000 - $100,000 Recruiting Heroes is looking for a highly motivated and experienced Field Production Technician to join our client in Ashburn, Virginia. The company produces and services equipment that ensures clean, environmentally safe, and reliable fuel management systems for large power generating systems and consults with these customers in overall fuel management and supply. Technicians, working on Service and Production teams will provide on-site service to customers, including maintenance, upgrades and repairs. Technical skills required include working with electrical power systems, electrical testing systems, CAD, Selective Catalytic Reduction (SCR) and other related processes. Travel may be up to 50% of the time. Qualified candidates will demonstrate two or more years of relevant experience. US Citizenship is required. Employee Benefits include: Vacation: Eligible for 2 weeks paid vacation annually, accrued monthly. Eligible to use accrued vacation days after 90 days employment. Holiday: Eligible for paid holidays per ESI Holiday schedule. Sick Policy: Eligible for paid sick days. This policy is subject to change if abuse occurs. Eligible after 90 days employment. Health Insurance: Eligible for group medical insurance after 90 days employment. 401(k) Retirement Plan: The retirement program allows you to set aside money via pre-tax deductions for your retirement. After completing one year of employment, you are eligible to become a participant in the 401 (k) retirement plan and receive a 3% employer contribution based on your salary in addition to your contributions. Flexible Spending Account for medical and dependent care expenses: The plan is available to eligible employees after 90 days of employment and allows employees to set aside a specific pretax dollar amount for dependent care expenses and specified medical care. Employee Assistance Program (EAP): The EAP program is a work/life benefit available to employees and their dependents at hire. The program provides confidential and free access to legal, financial, wellness and work/life resources. The program is available at hire. Employee Discount Program: Our discount program provides employees with discounted products and services ranging from sporting events, amusement parks, hotels and shopping. The program is available at hire. Access to 5 days of paid time off each year for volunteer service after the introductory period. ESI will match your contributions or donations to any non-profit organization that 501(c)(3) tax status up to a maximum of $750. Who We Are: Recruiting Heroes (RecruitingHeroesLLC.com) is an employment agency founded by a former First Responder. We are dedicated to finding amazing careers for America's Veterans and First Responders. Recruiting Heroes LLC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, or protected Veteran status.

Kelly Services in partnership with Nissan is currently seeking high skilled individuals to fill Production Technician openings at the Nissan manufacturing plant located in Canton, MS. Job Description Kelly Services is seeking a Manufacturing Technician in medical device production to perform diverse and complex assignments in support development and manufacturing in Laurel, MD. Duties/Responsbilities: Requirements: Shift: 7:00 AM-3:30 PM Payrate: $15.72 per hour Additional Information All your information is kept confidential as per EEO standards. Why is this a great opportunity? The answer is simple…working at our client is more than a job; it's a career. The opportunities are diverse whether you are right at the start of your career or whether you are looking for new challenges this is the job for you, so be quick and apply now!

Job DescriptionBenefits: 401(k) 401(k) matching Dental insurance Health insurance Opportunity for advancement Paid time off Vision insurance Do you love helping clients after a difficult situation? As a new Production technician, you will be a part of a team of quality people who focus on excellent service, fairness, and mutual respect. The production technician performs production processes to fulfill the service needs of individual restoration projects and maintains the professional appearance of SERVPRO equipment, as well as an assigned service vehicle. By providing quality, consistent, efficient work, the Restoration technician represents the best in the cleanup and restoration industry. In this position, you will be making a difference each and every day. We have a sincere drive toward the goal of helping make fire and water damage Like it never even happened! Benefits for Onboarded Employees: Pay Rate based on experience, with possibility of overtime pay and merit-based increases. We pay 50% of employee medical & dental insurance. Vision & Life insurance available. Paid Holidays Paid Vacation Time Up to 3% salary-matching contribution toward immediate vesting IRA. Paid certifications available based on merit. Primary Responsibilities Perform production processes, demolition and other labor intensive tasks in damage restoration projects. Inventory and load the work vehicle with equipment, products, and supplies. Maintain a clean and organized vehicle and clean equipment appearance. Prepare rooms/areas for work activities. Set up staging area and equipment for each project. Adhere to safety and risk management guidelines at all times Communicate with restoration supervisor and other technicians to maintain efficient production processes Perform end-of-day/end-of-job cleanup and breakdown. Leave jobsite with a clean and orderly appearance Position Requirements Effective communication with basic math and computer skills Experience in cleaning/restoration preferred High school diploma/GED IICRC certifications preferred Valid drivers license Ability to lift a minimum of 50 pounds regularly, occasionally up to 100 pounds with assistance Ability to climb ladders, work at ceiling heights, work in tight spaces Ability to repetitively push/pull/lift/carry objects Ability to successfully complete a background check subject to applicable law All employees of a SERVPRO Franchise are hired by, employed by, and under the sole supervision and control of an independently owned and operated Servpro Franchise. Servpro Franchise employees are not employed by, jointly employed by, agents of or under the supervision or control of Servpro Industries, LLC or Servpro Franchisor, LLC (the Franchisor), in any manner whatsoever. All Sample Forms provided by Servpro Industries to Servpro Franchises should be reviewed and approved by the Franchises attorney for compliance with Federal, State and Local laws. All Sample Forms are provided for informational purposes and Servpro Franchises may choose whether or not to use them. Each SERVPRO Franchise is Independently Owned and Operated. Revised 02/2021

Job DescriptionKey Role: Serve as a technical SIGINT operator delivering direct, mission-critical collection support to a client conducting high-impact national security operations. Operate, configure, and optimize SIGINT collection systems; execute precision tasking and collection against priority targets; and transform raw signals data into actionable insights that enable real-time operational decision-making. Partner closely with other mission stakeholders to build and execute technical collection strategies, deconflict operations, and close priority intelligence gaps. Work is onsite in the Washington Metropolitan Area and performed in a rotational shift environment.Basic Qualifications: • Active TS/SCI with Polygraph (Full Scope preferred) • 5+ years of relevant SIGINT collection/operations experience within the Intelligence Community or U.S. military • Knowledgeable in ground or airborne SIGINT collection operations, to include RF fundamentals, antennas, modulation types, and SIGINT sensor tasking • Strong knowledge of SIGINT collection equipment and associated tooling (e.g., SDRs, receivers, direction-finding suites, signal recorders, processing and exploitation tools) • Proficient with Microsoft Office and standard IC software tools • Excellent written and oral communication skills with the ability to brief teammates and leadership • Military background or equivalent operational experience• Ability to work rotational shift work - sample calendar to be provided • BA or BS degree (Direct relevant and military experience may be applied in lieu of a degree) Additional Qualifications: • Experience with law enforcement, military, or U.S. government intelligence components • Experience working in an Operations Center or real-time mission environment • Demonstrated ability to work as part of a small, high-performing team under time-sensitive conditions • Familiarity with all-source integration to inform tasking and increase collection efficacy Clearance:• Applicants selected will be subject to a security investigation and must meet eligibility requirements for access to classified information CADRE is proud of its emphasis on equality of opportunity for all applicants Job Posted by ApplicantPro