Manufacturing technician jobs in Mount Juliet, TN - 74 jobs

TITLE Production Technician REPORTS TO Area Leader/Team Leader Work in a variety of areas, in production and packaging, to produce product for the company. KEY RESPONSIBILITIES Follow all company Safety Rules and Good Manufacturing Practices (GMP's). Produce high quality products in a safe and healthful manner. Assigned shift attendance is required. To work in all areas of production and packaging, as assigned, which includes operating, being in close proximity to and crossing platforms over machinery. Ability to work as part of a team. Assist fellow employees as needed. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the duties and functions of the position. EDUCATION and/or EXPERIENCE High-school degree or equivalent is required. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, GMP's and general instructions. Good communication skills are required. REASONING ABILITY Ability to apply common sense understanding to carry out both oral and written instructions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions and duties of this job. Reasonable accommodations may be made to enable individuals with disabilities. While performing the duties of this job, the employee is regularly required to stand and lift. The employee is required to stand and walk at minimum 70% of the time. The employee must be able to work 12 hour rotating shifts. The employees must occasionally lift/push/pull or carry up to fifty (50) pounds, and should be able to lift 30-35 pounds on a frequent basis. The employee must be able to squat or kneel and to bend on a frequent basis. The employee must be able to work in a cold (40-50 degree) environment. The employee must be able to tolerate exposure to flour and yeast materials. The employee must be able to climb steps on a frequent basis. VISION Employee is required to have a minimum of 20/40 vision in each eye with or without corrective lenses. The applicant must pass a standard eye exam. SAFE PERFORMANCE REQUIREMENTS Employee must have the ability to perform the essential job functions identified above consistent with safety standards and practices with or without a reasonable accommodation. WORK ENVIRONMENT The work environments characteristics described here are representative of those an employee encounters while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate to high.

This highly specialized position requires a candidate with the experience and the ability to calibrate a wide variety of electronic, test, diagnostic and general purpose instruments. The technician needs to have the ability to calibrate measurement instruments ranging from Digital Multimeters, Process Control Devices, Pressure Gages, Torque Wrenches, and Force Gages. Duties and Responsibilities: Calibration encompassing the following core disciplines: Temperature, Pressure, Flow, Electrical, Electronics, Time, Frequency, Torque, Force. Calibrating of electronic instruments: multimeters, oscilloscopes, and function generators. Perform calibrations in-lab and on-site. Prepare for on-site calibrations by verifying equipment is available and communicating with the customer. Perform quality inspection of calibrated equipment as approved by the Quality Manager. Consistently maintain good work attendance and productive work ethic. Will perform other duties as assigned by the Service Manager. Minimum Requirements/Qualifications: Understanding of a wide variety of precision measurement equipment, to include the care and use of Instrumentation, Gages, and Precision Measurement Equipment. Strong experience calibrating electronic instruments: multimeters, oscilloscopes, function generators, Experience in Calibration Program Management and Measurement Principles. Be proficient in gage management software. Demonstrate self motivation, initiative, honesty, integrity, and attention to detail Have a valid driver's license and clean driving record Associates Degree in a technical discipline preferred; Instrumentation, Industrial, Mechanical, or Electronics Engineering, for example. Navy or Marine Corp GCAMS / ACTS , AF PMEL, or Army MOS - 94H Test Measurement & Diagnostic Equipment Support Specialist (TMDE) Core Competencies Commitment to Excellence - Check your work Customer Relationship Management - communicate with customers to deliver better service Methodical Approach - troubleshooting Team Building Physical Demands of the Position: Stands greater than four hours at a time May require walking 2 - 4 miles during an 8 hour period Stoops and bends below knee level 2 - 4 times an hour Lifts and carries less than 50 pounds but greater than 25 pounds repetitively Climbs stairs more than four times in an eight hour shift Pushes / pulls objects greater than 25 pounds Reaches out Reaches overhead Repetitively uses feet Repetitively uses hands (computer keyboard) Grips with hands

Benefits: 401(k) Opportunity for advancement Paid time off Benefits/Perks Competitive Compensation Great Work Environment Career Advancement Opportunities Job SummaryWe are seeking a Mover/Production Technician to join our team! As such, you will be traveling to a different location each day, ensuring boxes and furniture are properly wrapped, and loading everything specified into a vehicle. You will also be responsible for securing the load properly to ensure nothing is damaged or destroyed, unloading the items at the destination, and providing excellent customer service to our clients. You will also be expected to help clean house contents once back at our location. The ideal candidate is comfortable working in all weather conditions, has strong customer service and communication skills, and can comfortably work on their feet lifting heavy objects. Responsibilities Travel to each location and ensure all boxes are properly packed, and all furniture is ready to move safely Load everything into the truck or vehicle with the team, taking care to make sure everything is well organized and the load is properly distributed Secure all boxes, furniture, and equipment before moving Unload all boxes, furniture, and equipment, placing them in the designated rooms as noted by the owners Maintain a safe, clean work environment Qualifications Strong communication and customer service skills Works well in a team environment Can comfortably work in all weather conditions Can lift and move heavy objects Can work on your feet for much of the day Compensation: $20.00 per hour Our Story FRSTeam of Middle TN is a trusted content restoration Company specializing in the restoration of textiles and electronics damaged by fire, water, smoke, mold, debris, and more. Led by Chad McCaslin, a third-generation owner of Heritage Cleaners in Murfreesboro, TN, we bring decades of experience and a personal commitment to helping homeowners recover after a loss. Chad's passion for restoration comes from a deeply personal experience. Having gone through a devastating house fire himself, he understands the emotional and logistical challenges homeowners face during such traumatic events. This experience inspired him to dedicate his career to helping others restore their valuable belongings and regain a sense of normalcy. At FRSTeam, we work closely with restoration contractors, insurance agents, and adjusters to ensure smooth and efficient pack-in and pack-out services. With our extensive expertise and meticulous attention to detail, we are committed to restoring your items to their pre-loss condition, offering peace of mind during what can be a difficult time. Our values At FRSTeam of Middle TN, our core values are centered on integrity, compassion, and excellence. We believe in treating every client like family, providing expert restoration services and peace of mind during stressful times. Our team is committed to doing what's right, every time, whether it's going the extra mile to ensure a job is done right or offering thoughtful, personalized support. We take pride in our work, always striving to exceed expectations and deliver lasting results that our clients can count on.

Work Schedule 10 hr shift/days Environmental Conditions Able to lift 40 lbs. without assistance, Adherence to all Good Manufacturing Practices (GMP) Safety Standards, Cleanroom: no hair products, jewelry, makeup, nail polish, perfume, exposed piercings, facial hair etc... allowed, Some degree of PPE (Personal Protective Equipment) required (safety glasses, gowning, gloves, lab coat, ear plugs etc.), Standing for full shift Job Description As part of the Thermo Fisher Scientific team, you'll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life every single day to enable our customers to make the world healthier, cleaner and safer. We provide our global teams with the resources needed to achieve individual career goals while helping to take science a step beyond by developing solutions for some of the world's toughest challenges, like protecting the environment, making sure our food is safe or helping find cures for cancer. Location/Division Specific Information: Now is an exciting time to join our Nashville Manufacturing & Distribution team, a team dedicated to ensuring our customers receive the products they need to achieve their scientific goals - quickly, reliably, and safely. If you believe in working the right way for the right reason join our growing team today! Shift time will be 6AM - 4:30PM Monday - Thursday, OT on Friday How Will You Make an Impact?: As a Production Technician, you will be responsible for the manufacturing, assembly, and/or packaging of Bioprocess Containers in a clean room environment. You will carry out the production process by closely following the Standard Operating Procedures, work instruction documents and blueprints or drawings as they relate to assembly, materials handling, equipment operation, and finished goods packaging. A Day in the Life: Work in a production environment where you will manufacture, operate machinery, assemble tubing and connectors, package and inspect product in accordance with product blueprint and manufacturing drawings while adhering to company SOP's and WID's. Use tools and equipment such as, but not limited to, computers, calculators, measuring tools, assembly hand tools, Bioprocess Container machinery and pallet jacks. Following all safety requirements and Current Good Manufacturing Practices (cGMP) requirements. Use strong attention to detail to ensure products meet quality standards by collaborating with upstream and downstream stations to implement mutual inspection, find and correct quality errors, record, and report problems in a timely manner. Record accurate documentation in the Production Control Documents (PCD) as the task is being performed. Help us get better by actively participating in our PPI (Practical Process Improvements), Lean and Continuous Improvement activities including 5S activities Effectively work as part of a team in the manufacturing process and assist with training and mentoring co-workers. Focus on your development through timely and proactive completion of training. Adhere to your schedule to ensure production goals are met. Education: High school diploma or equivalent required. Experience: Required: No previous work experience required Preferred: Previous work experience in manufacturing, operations, production, lab setting or related field Preferred: Experience in a cGMP environment Knowledge, Skills, Abilities: Strong analytical and problem-solving abilities Good verbal/written communication skills Have a proven track record of following policies, procedures, instructions, and meeting goals consistently as an individual and with the team Ability to read and understand written materials that include words, pictures, and numbers Ability to count items, add and multiply using a calculator, and measure using a ruler or measuring tape Ability to maintain a high level of accuracy and attention to detail Ability to perform in a fast-paced controlled cleanroom environment up to 12 hours a day with additional overtime as the need arises Ability to infrequently lift and manipulate up to 40 pounds unassisted Ability to stand and move about including reaching, bending, stooping, grasping Ability to use hand tools and equipment including forceful gripping, grasping, pushing, pulling and repetitive motion Physical Requirements / Work Environment Specific gowning is required including gloves, cleanroom shoes/coverings, hair & beard net and face cover, safety glasses with no makeup / jewelry, artificial or painted nails, and the like The Clean room is controlled at greater than 30% humidity with a temperature between 60º and 70º The Clean room has some ambient noise Ability to use PPE (Personal Protective Equipment) and understand chemical hygiene including labels and SDS (Safety Data Sheets), common chemicals are disinfecting, solvents and IPA (Isopropyl Alcohol 70% and 99%) What We Offer Compensation Competitive Hourly Pay Rate Additional shift differential for 2nd shift and 3rd shift positions Annual performance-based bonus Annual merit performance-based increase Excellent Benefits Benefits & Total Rewards | Thermo Fisher Scientific Medical, Dental, & Vision benefits-effective Day 1 Paid Time Off & Designated Paid Holidays Retirement Savings Plan Tuition Reimbursement Employee Referral Bonus Career Advancement Opportunities

As a Coating Line Operator you will be assigned to work on a coating line and may work in one or more work stations including the face unwind, liner unwind, main console/winder, and PMA lab. You may be proficient on more than one coating asset in a given location. You will be responsible for leading daily operation of the coater including normal operation, machine set ups and changeovers, problem-solving, coordinating PM's, making decisions on machine adjustments. You will provide direction and assign job tasks to other operations assigned to your machine. In this role, you will work - 2nd Shift, M-F 3:45PM-12AM. Starting rate: $27.29/hr plus $2/hr shift differential In this important role you will also be responsible for: * Ensure compliance with all environmental, health and safety procedures, policies, and practices. * Maintain a safe working environment for all employees. Identify and escalate safety issues immediately. Support safety improvement initiatives. * Load raw material into machine and unload finished product. * Perform tests and check product routinely for multiple characteristics using standard measuring devices and making some judgments against not readily measurable standards. * Meet production schedules and program production sequences for optimal productivity. * Follow standard operating procedures and specifications or instructions of higher level technical personnel and monitor meters, gauges, valves, flow ratios, temperatures, pressures, and related controls and guidelines to ensure adherence to production/process specifications. * Maintain accurate production records and logs of equipment and product performance. * Participate in group problem-solving teams and other continuous improvement activities. Support ELS initiatives to improve manufacturing performance (throughput, scrap reduction, safety, ISO work instructions, ELS * Lead shift turnover discussions, communicate daily priorities to the team, and assist in keeping MDI boards up to date. Teamwork: Assist and support other team members in meeting department and site goals. Participate and share in performing all tasks necessary to run the facility. Contribute and participate in team decision making. Provide support in project work and other special requests. Train other employees on line tech responsibilities as requested. * Accountable for daily production maintenance, preventative maintenance and housekeeping tasks according to established standards. * Perform all other duties assigned by Supervisor. * High school diploma or equivalent (GED) or 3+ years of relevant manufacturing work experience. * Regard safety as a core value; must be willing and able to work safely; must always wear PPE. * Demonstrate a strong quality and service focus. * Good written and oral communication skills. * Ability to read and comprehend documents related to product manufacturing. * Able to work both individually and in a team-based environment. * Able to work during the designated hours and accept a reasonable amount of overtime (including weekends). * Demonstrated initiative, integrity, and judgment skills * Demonstrate record of embracing and contributing to daily ELS processes and tools - MDI, standard work, 5S, etc. * Positive attitude, a strong work ethic, and demonstrated reliability. * Proficiency with computer applications, especially strong ERP system transactional skills. * Ability to lift up to 50 pounds without assistance periodically through the shift. Preferred: * 2 years of experience in skilled labor position with demonstrated mechanical aptitude * 2 years Coating Department experience All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status, or other protected status. EEOE/M/F/Vet/Disabled. All your information will be kept confidential according to EEO guidelines. Reasonable Accommodations Notice If you require accommodations to view or apply for a job, alternative methods are available to submit an application. Please contact ************** or ********************************** to discuss reasonable accommodations. #Indeed-JJ-LP

**About Archaea** bp is committed to investing in lower carbon energy so we can meet our ambition to reach net zero by 2050. And while we're still mostly in oil and gas today, bioenergy is one of our five transition growth engines and a key focus to help us support the global energy transition. Archaea Energy, a bp company, is a leader in landfill gas to energy and the largest renewable natural gas (RNG) producer in the US. With big ambitions, we specialize in the development, construction and operation of RNG, landfill-gas-to-electric and dairy digester facilities. The team operates around 50 sites in 32 states with a robust development pipeline. **About the role** At our Middle Point facility in Murfreeboro, TN, we convert landfill gas into pipeline quality natural gas (High Btu or Renewable Natural Gas). Our Operations Technician operates the landfill gas processing facility. We process the landfill gas by removing the majority of the non-methane components including CO2, water, sulfur and volatile and non-volatile organic compounds to attain pipeline quality. The RNG Operator will operate and maintain Landfill gas to High BTU processing facility; which will include Guild gas process, Gas Compressors, CO2 removal system, Thermal-Oxidizers, and H2S removal systems. We also perform intermediate to sophisticated level Instrument and Control repair, maintenance, calibration and solving. **Schedule** There will be four set schedules of 12 hours shifts from either 7a-7p or 7p-7a to all for 24/7 coverage of the site. The schedule is subject to change per business needs and management discretion. **Key accountabilities** + Own the safe operation of the plant during assigned shift in the most efficient and productive method to maintain compliance with Standard Operating Procedures (SOP's) and prescribed safety and environmental standards. + Make periodic inspections of plant equipment to resolve accurate and normal operating conditions. Check and record operational data such as fluid levels, temperatures and pressures, compare to trends and have the ability to make corrections as needed. + Review daily operating reports and other records to ensure specified operating characteristics in control of the plant equipment. + Perform preventive maintenance and solving on plant instrumentation and equipment. + Detect and correct faulty and malfunctioning mechanical and electrical components, devices and equipment. + Operate sophisticated instrumentation and process control systems. + Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures using testing devices such as ohmmeters and voltmeters. + Tackle and repair electrical system wiring from control wiring up to 480 volts. Install, remove and modify equipment. + Advise Lead Operation Technician and Regional Manager of shutdown or major changes in power output of unit. + Maintain all plant equipment and structures per manufactures and Archaea Energy guidelines. + Maintain a clean work space including the plant building, control room, rest room, break room and grounds. + Maintain daily operation logs for shift per prescribed standards. + Assist in planning maintenance and outage activities. + Assist in defining, ordering and procuring all required parts. + Responds in a timely manner to callouts and works overtime as the need arises. + Perform analytical tests as needed (i.e. PH, Conductivity, methane, H2S, moisture). + Support all facets of Hazardous waste handling and management in accordance with training. Duties may range from filling of waste containers, accurate labeling, movement of containers, completing appropriate paperwork, and signing of Hazardous waste shipping manifest or receiving hazardous products. + This position requires 25%-50% travel per month (First 12 months in the position will require 50% travel per month when hired for a new plant. Travel requirement will reduce to 25% per month when working at an existing plant or in year 2 and beyond for a new plant). **Essential education** + Requires a High School Diploma or equivalent. **Essential experience** + Intermediate Electrical, Chemical and Mechanical experience. + Previous landfill gas operation experience a plus, minimum of 1-3 years in landfill gas processing, chemical plant operations, industrial gas operations, or power plant operations or equivalent. + Understanding of process control systems as applied to landfill gas collection and processing. + Technical / Solving skills with ability to read and understand sophisticated technical manuals and schematics. + Understanding a variety of sensors and transducer systems, calibrate, and solve different types of pressure, level, flow and temperature sensors, understand the complete plant process and how it's affected by the control system, including fixing mechanical systems as the need arises. + Knowledge of basic math, gas chemistry, piping and instrumentation drawings. + Follow established procedures with minimal amount of general supervision (i.e., work independently). + Ability to recognize colors, able to distinguish between the red and green status indicators on PLC and wire colors. + Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. + Ability to write routine reports and correspondence. + Ability to speak optimally to employees of the organization. + Ability to tackle practical problems and take care of concrete variables. + Proficient using computers (experience using MS Word, Excel and email systems) and supervising equipment to measure, record and make adjustments within operating parameters, perform fault finding and repair as well as required scheduled maintenance. + Hands-on mechanical and process equipment. + Must possess a valid driver's license, must pass hearing and DOT drug test **Why join us?** Delivering a better and more balanced energy system requires many different approaches and solutions. All of us have a part to play. We aim to support our people to learn and grow in an inclusive environment in which everyone is respected and treated fairly. So, if you have the right skills, commitment and courage to help us invest in today's energy system and build out tomorrow's, apply today! How much do we pay (Base)? $30/hour - $32/hour. *Note that the pay range listed for this position is a genuinely expected and reasonable estimate of the range of possible base compensation at the time of posting. This position offers paid vacation depending on your years of relevant industry experience and will range from 120 - 240 hours of vacation per year for full times employees (60 - 240 hours of vacation per year for part time employees). You will also be eligible for 9 paid holidays per year and 2 personal choice holidays. You may learn more about how we calculate paid vacation and view our generous vacation and holiday schedules at benefits@bp (********************************************* . Bp has a parental leave policy as well, which offers up to 8 weeks' paid leave for the birth or adoption of a child. Learn more at benefits@bp (********************************************* . Join our industry-leading team and you'll receive a reward and wellbeing package to enable your work to fit with your life. These include, but are not limited to: Quarterly Momentum Bonus + 401K Program + Health, Vision, And Dental Insurance + Life Insurance + Short-Term Disability + Long-Term Disability But above all? You'll play a key part in helping bp deliver our ambition - to be a net zero company by 2050 or sooner and help the world get to net zero. **Apply today!** **Travel Requirement** Up to 25% travel should be expected with this role **Relocation Assistance:** This role is not eligible for relocation **Remote Type:** This position is not available for remote working **Skills:** Control of Work, Cost-conscious decision-making, Maintenance general, Procedures and practices, Reliability general, Risk Management, Safety Leadership, Turnaround general **Legal Disclaimer:** We are an equal opportunity employer and value diversity at our company. We do not discriminate on the basis of race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, socioeconomic status, neurodiversity/neurocognitive functioning, veteran status or disability status. Individuals with an accessibility need may request an adjustment/accommodation related to bp's recruiting process (e.g., accessing the job application, completing required assessments, participating in telephone screenings or interviews, etc.). If you would like to request an adjustment/accommodation related to the recruitment process, please contact us . If you are selected for a position and depending upon your role, your employment may be contingent upon adherence to local policy. This may include pre-placement drug screening, medical review of physical fitness for the role, and background checks.

At Lilly, we unite caring with discovery to make life better for people around the world. We are a global healthcare leader headquartered in Indianapolis, Indiana. Our employees around the world work to discover and bring life-changing medicines to those who need them, improve the understanding and management of disease, and give back to our communities through philanthropy and volunteerism. We give our best effort to our work, and we put people first. We're looking for people who are determined to make life better for people around the world. For 140 years, Lilly has manufactured medicines that improve people's lives around the world. We produce our medicines using some of the most sophisticated manufacturing technologies and rigorous quality standards. Lilly Manufacturing strives for excellence in its process, standards, procedures and behaviors to develop medicines with safety first and quality always. Lilly is currently constructing a cutting-edge facility for the manufacture of new modalities including Gene Therapy in Lebanon, Indiana. This facility will be Lilly's most technically advanced manufacturing site focused on the delivery of the next wave of innovative products at Lilly. It will include next-generation manufacturing technologies and advanced data collection and analysis platforms that will deliver improvements in safety, quality, and process performance. This is a unique opportunity to be a part of the team for the startup of a greenfield manufacturing site, and the successful candidate will help to start up the facility for both clinical and commercial supply. This is an exciting opportunity to help start up a state-of-the-art facility and build a manufacturing supply chain from ground-up. The Manufacturing Operator will be responsible for performing routine manufacturing activities across GMP manufacturing areas, including: Cell Culture, Downstream Purification, and Fill & Finish at the Lebanon Advanced Therapies, LP2 site. Initially, the Operator will be responsible for supporting execution of equipment qualification, developing site operations procedures and setting up production areas. During this initial project delivery/startup phase of the project, roles will be fluid and dynamic. Once the plant is operational, the Manufacturing Operator will be responsible for execution of production activities on their shift under the leadership of the shift supervisor. As a Manufacturing Operator, your responsibilities will include: * Work in a cleanroom environment to produce advanced therapies in a safe and quality manner. * Coordinate production activities with Quality Control, Quality Assurance, and Plant Maintenance to facilitate on-time release of advanced therapies. * Participate in equipment commissioning and qualification testing and process validation activities in collaboration with other departments. * Safely work with BSL-2 materials, following site biologics safety program. * Conduct and appropriately document production of advanced Therapies via strict adherence to digital manufacturing batch records and affiliated SOPs. * Utilize and monitor manufacturing equipment to ensure performance and safety standards are met. * Collaborate with maintenance technicians, equipment manufacturers, and quality assurance to ensure that all production equipment is in good working order and is validated for use. * Provide verbal and written reports to supervisors and other teams in a clear and concise manner. * Maintain accurate and complete electronic records and logbooks as per cGLP and/or cGMP, as appropriate. * Adhere to all applicable procedures, cGLP, cGMPs, company policies, and any other quality or regulatory requirements. * Compliance with cleanroom gowning requirements required for completing specific work in drug substance and drug product. * Work well in a fast-paced team environment. Minimum Requirements: High School diploma or equivalent Additional Preferences: * Direct manufacturing experience with automatic, manual, and semi-automated equipment, following operational procedures. * Technical problem-solving skills. * Good communications skills (both oral and written). * Requires learning and understanding Good Manufacturing Practices and strict adherence to GMP regulations. * Will be expected to adhere to all safety and environmental guidelines and to promote safety and environmental compliance in all areas. * Good organization skills. * Ability to work with and learn new digital systems * Ability to demonstrate attention to detail Other Information: * During the start-up phase of the project, the shift will be primarily day shift. As the site nears normal operation, shift work will be required. Anticipated to be 4 x 10 hour rotating shifts * Ability to maintain focus on a complex task for 4-6 hours at a time. * Adaptable to work in a fast-paced and evolving environment. * Maintain clear, consistent, and constant verbal communication with one or more team members during performance of duties. * Some overtime required. Lilly is dedicated to helping individuals with disabilities to actively engage in the workforce, ensuring equal opportunities when vying for positions. If you require accommodation to submit a resume for a position at Lilly, please complete the accommodation request form (******************************************************** for further assistance. Please note this is for individuals to request an accommodation as part of the application process and any other correspondence will not receive a response. Lilly is proud to be an EEO Employer and does not discriminate on the basis of age, race, color, religion, gender identity, sex, gender expression, sexual orientation, genetic information, ancestry, national origin, protected veteran status, disability, or any other legally protected status. Our employee resource groups (ERGs) offer strong support networks for their members and are open to all employees. Our current groups include: Africa, Middle East, Central Asia Network, Black Employees at Lilly, Chinese Culture Network, Japanese International Leadership Network (JILN), Lilly India Network, Organization of Latinx at Lilly (OLA), PRIDE (LGBTQ+ Allies), Veterans Leadership Network (VLN), Women's Initiative for Leading at Lilly (WILL), en Able (for people with disabilities). Learn more about all of our groups. Actual compensation will depend on a candidate's education, experience, skills, and geographic location. The anticipated wage for this position is $17.30 - $34.38 Full-time equivalent employees also will be eligible for a company bonus (depending, in part, on company and individual performance). In addition, Lilly offers a comprehensive benefit program to eligible employees, including eligibility to participate in a company-sponsored 401(k); pension; vacation benefits; eligibility for medical, dental, vision and prescription drug benefits; flexible benefits (e.g., healthcare and/or dependent day care flexible spending accounts); life insurance and death benefits; certain time off and leave of absence benefits; and well-being benefits (e.g., employee assistance program, fitness benefits, and employee clubs and activities).Lilly reserves the right to amend, modify, or terminate its compensation and benefit programs in its sole discretion and Lilly's compensation practices and guidelines will apply regarding the details of any promotion or transfer of Lilly employees. #WeAreLilly

Description Job Title: Production TechnicianJob Status: FULL TIME 1st ShiftSalary: $17.75 - 1st Shift Benefits: 14 Paid Holidays 3 Weeks Paid Time Off Annually Weekly Payroll Comprehensive Insurance (Medical, Dental, Vision) 401k Match Job Overview: MARELLI is seeking dedicated Production Technicians for immediate openings on the 1st shift. The role involves semi-skilled assembly, machine operation, and general production activities on the assembly line.Responsibilities: Assemble components and sub-components manually or using machinery/tools on the assembly line. Perform tasks requiring standing or repetitive motions (e.g., gripping, reaching, bending, pushing, or pulling). Move materials/products within the work area (lifting up to 40 pounds). Participate in periodic cross-training and transition from simple assembly to machine operations. Conduct record-keeping for production reports, checklists, time-keeping, and scrap/reject results. Work in environments with exposure to welding fumes, chemicals, noise, or vibrations. Requirements: Previous factory/manufacturing experience is a plus. No High School Diploma or GED required. Basic grammar and math skills. Effective communication skills. Ability to work a standard 40-hour week, with overtime as required. Additional Information: MARELLI is an Equal Opportunity Employer. Employment decisions are based on qualifications without regard to race, color, religion, sex, sexual orientation, national origin, gender identity, genetic information, disability, protected veteran status, age, or any other legally protected group status. Candidates must be legally authorized to work in the United States and provide proof of eligibility at hire. Visa sponsorship is not available.Related Job Titles/Functions: Production Worker, Assembly Line Technician, Assembly Worker, Manufacturing Technician, Assembly Line Worker.

TITLE Production Technician REPORTS TO Area Leader/Team Leader Work in a variety of areas, in production and packaging, to produce product for the company. KEY RESPONSIBILITIES * Follow all company Safety Rules and Good Manufacturing Practices (GMP's). * Produce high quality products in a safe and healthful manner. * Assigned shift attendance is required. * To work in all areas of production and packaging, as assigned, which includes operating, being in close proximity to and crossing platforms over machinery. * Ability to work as part of a team. * Assist fellow employees as needed. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each duty and responsibility satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the duties and functions of the position. EDUCATION and/or EXPERIENCE High-school degree or equivalent is required. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, GMP's and general instructions. Good communication skills are required. REASONING ABILITY Ability to apply common sense understanding to carry out both oral and written instructions. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions and duties of this job. Reasonable accommodations may be made to enable individuals with disabilities. * While performing the duties of this job, the employee is regularly required to stand and lift. The employee is required to stand and walk at minimum 70% of the time. * The employee must be able to work 12 hour rotating shifts. * The employees must occasionally lift/push/pull or carry up to fifty (50) pounds, and should be able to lift 30-35 pounds on a frequent basis. * The employee must be able to squat or kneel and to bend on a frequent basis. * The employee must be able to work in a cold (40-50 degree) environment. * The employee must be able to tolerate exposure to flour and yeast materials. * The employee must be able to climb steps on a frequent basis. VISION Employee is required to have a minimum of 20/40 vision in each eye with or without corrective lenses. The applicant must pass a standard eye exam. SAFE PERFORMANCE REQUIREMENTS Employee must have the ability to perform the essential job functions identified above consistent with safety standards and practices with or without a reasonable accommodation. WORK ENVIRONMENT The work environments characteristics described here are representative of those an employee encounters while performing the essential duties of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate to high.

BU2 Thermal and Fluid System Your Contribution The Assembly Producer will operate a press or assemble parts to form complete units or subassemblies at a press, filling machine, or conveyor line. Position is responsible for both accurately and thoroughly completing and maintaining all daily paperwork associated with the assembly process. Your Experience & Qualifications * Ability to read gauges and record findings * Ability to measure sizes of parts in millimeters * Ability to use a computer, especially SAP, OEE and label programs. * Attention to detail and ability to maintain a high quality orientation * Move product, material, and/or equipment to and from designated areas * Maintain clean, organized, safe working environment with equipment and materials located in proper locations in accordance with 5S standards inside and outside of facility * Safely and efficiently operate all machinery * Perform work in an environmentally conscious manner and reduce waste * Ability to work all designated shifts * Excellent attendance record * Ability to work in a team environment * Other duties as assigned Our Offering We will provide a collaborative environment working on exciting assignments, along with ongoing personal & career development opportunities. We encourage you to apply even if you don't meet every single requirement. You may just be the right candidate for this or other roles! After receiving your online application, the interview process will typically be, a screening call followed by Personal Interview(s) For more information about MAHLE and what a career with us looks like for you, click here. and to learn more about our foundation owned technology group click here. #DiversityMatters with our inclusive culture, we welcome applications from all social, religious & ethnical backgrounds, disabilities both mental and physical, identities (gender) and neurodivergent people. Do you have any questions? ************************ US Facts about the job Benefits: Entry level: Production workers / General labor Part- / Full-time: Full Time Functional area: Production Department: BU2 Thermal and Fluid System Location: Murfreesboro, TN, US, 37127 Company: MAHLE Filter Syst.(US) Closing date for applications Don't waste any time, apply while the position is online. Your future at MAHLE As a team player and someone who thinks ahead, you can deploy all your skills with us. In cooperation with colleagues from different countries and areas, you contribute in designing the mobility of the future. When selecting MAHLE, you choose trend-setting technologies and strategies. Are you interested in working with us and developing efficient and environmentally-friendly solutions, optimising existing products, and turning innovative ideas into reality? Then MAHLE is the right address for you. Shape the future with us.

About Archaeabp is committed to investing in lower carbon energy so we can meet our ambition to reach net zero by 2050. And while we're still mostly in oil and gas today, bioenergy is one of our five transition growth engines and a key focus to help us support the global energy transition. Archaea Energy, a bp company, is a leader in landfill gas to energy and the largest renewable natural gas (RNG) producer in the US. With big ambitions, we specialize in the development, construction and operation of RNG, landfill-gas-to-electric and dairy digester facilities. The team operates around 50 sites in 32 states with a robust development pipeline. About the role At our Middle Point facility in Murfreeboro, TN, we convert landfill gas into pipeline quality natural gas (High Btu or Renewable Natural Gas). Our Operations Technician operates the landfill gas processing facility. We process the landfill gas by removing the majority of the non-methane components including CO2, water, sulfur and volatile and non-volatile organic compounds to attain pipeline quality. The RNG Operator will operate and maintain Landfill gas to High BTU processing facility; which will include Guild gas process, Gas Compressors, CO2 removal system, Thermal-Oxidizers, and H2S removal systems. We also perform intermediate to sophisticated level Instrument and Control repair, maintenance, calibration and solving. ScheduleThere will be four set schedules of 12 hours shifts from either 7a-7p or 7p-7a to all for 24/7 coverage of the site. The schedule is subject to change per business needs and management discretion. Key accountabilities Own the safe operation of the plant during assigned shift in the most efficient and productive method to maintain compliance with Standard Operating Procedures (SOP's) and prescribed safety and environmental standards. Make periodic inspections of plant equipment to resolve accurate and normal operating conditions. Check and record operational data such as fluid levels, temperatures and pressures, compare to trends and have the ability to make corrections as needed. Review daily operating reports and other records to ensure specified operating characteristics in control of the plant equipment. Perform preventive maintenance and solving on plant instrumentation and equipment. Detect and correct faulty and malfunctioning mechanical and electrical components, devices and equipment. Operate sophisticated instrumentation and process control systems. Test electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures using testing devices such as ohmmeters and voltmeters. Tackle and repair electrical system wiring from control wiring up to 480 volts. Install, remove and modify equipment. Advise Lead Operation Technician and Regional Manager of shutdown or major changes in power output of unit. Maintain all plant equipment and structures per manufactures and Archaea Energy guidelines. Maintain a clean work space including the plant building, control room, rest room, break room and grounds. Maintain daily operation logs for shift per prescribed standards. Assist in planning maintenance and outage activities. Assist in defining, ordering and procuring all required parts. Responds in a timely manner to callouts and works overtime as the need arises. Perform analytical tests as needed (i. e. PH, Conductivity, methane, H2S, moisture). Support all facets of Hazardous waste handling and management in accordance with training. Duties may range from filling of waste containers, accurate labeling, movement of containers, completing appropriate paperwork, and signing of Hazardous waste shipping manifest or receiving hazardous products. This position requires 25%-50% travel per month (First 12 months in the position will require 50% travel per month when hired for a new plant. Travel requirement will reduce to 25% per month when working at an existing plant or in year 2 and beyond for a new plant). Essential education Requires a High School Diploma or equivalent. Essential experience Intermediate Electrical, Chemical and Mechanical experience. Previous landfill gas operation experience a plus, minimum of 1-3 years in landfill gas processing, chemical plant operations, industrial gas operations, or power plant operations or equivalent. Understanding of process control systems as applied to landfill gas collection and processing. Technical / Solving skills with ability to read and understand sophisticated technical manuals and schematics. Understanding a variety of sensors and transducer systems, calibrate, and solve different types of pressure, level, flow and temperature sensors, understand the complete plant process and how it's affected by the control system, including fixing mechanical systems as the need arises. Knowledge of basic math, gas chemistry, piping and instrumentation drawings. Follow established procedures with minimal amount of general supervision (i. e. , work independently). Ability to recognize colors, able to distinguish between the red and green status indicators on PLC and wire colors. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak optimally to employees of the organization. Ability to tackle practical problems and take care of concrete variables. Proficient using computers (experience using MS Word, Excel and email systems) and supervising equipment to measure, record and make adjustments within operating parameters, perform fault finding and repair as well as required scheduled maintenance. Hands-on mechanical and process equipment. Must possess a valid driver's license, must pass hearing and DOT drug test Why join us?Delivering a better and more balanced energy system requires many different approaches and solutions. All of us have a part to play. We aim to support our people to learn and grow in an inclusive environment in which everyone is respected and treated fairly. So, if you have the right skills, commitment and courage to help us invest in today's energy system and build out tomorrow's, apply today!How much do we pay (Base)? $30/hour - $32/hour. *Note that the pay range listed for this position is a genuinely expected and reasonable estimate of the range of possible base compensation at the time of posting. This position offers paid vacation depending on your years of relevant industry experience and will range from 120 - 240 hours of vacation per year for full times employees (60 - 240 hours of vacation per year for part time employees). You will also be eligible for 9 paid holidays per year and 2 personal choice holidays. You may learn more about how we calculate paid vacation and view our generous vacation and holiday schedules at benefits@bp. Bp has a parental leave policy as well, which offers up to 8 weeks' paid leave for the birth or adoption of a child. Learn more at benefits@bp. Join our industry-leading team and you'll receive a reward and wellbeing package to enable your work to fit with your life. These include, but are not limited to:Quarterly Momentum Bonus 401K ProgramHealth, Vision, And Dental InsuranceLife InsuranceShort-Term DisabilityLong-Term DisabilityBut above all? You'll play a key part in helping bp deliver our ambition - to be a net zero company by 2050 or sooner and help the world get to net zero. Apply today!

Manufacturing, innovation, and happy pets too. We are excited to announce that we are looking for a Production Operator: Freeze Dry - Weekend Shift to join our rapidly growing company. With thirty years of growth in the global pet food sector, our ORIJEN and ACANA brands define our vision of being The Global Leader in Advancing Premium Food for Pets. If you are passionate about personal and professional growth and see yourself as a key player contributing to our continued success by working in our award-winning company - we would love to hear from you. Summary We have a Production Operator position-Freeze Dry. This position is a weekend shift. These positions require demonstrated mechanical and technical skills necessary to operate the equipment safely and efficiently. These positions play a critical role in continuous improvement through identifying both equipment and procedural changes. Responsibilities Confer with the Supervisor and/or Team Leader to determine scheduled production runs and associated mixing or packaging requirements. Perform daily inventory of all dry and fresh ingredients and accurate recording of levels. Unloading of trucks including proper receiving and inventory transactions. Operate heavy machinery including grinding equipment for fresh meats and ingredients, and/or automated and manual packaging equipment in a safe and efficient manner. Develop and maintain successful professional working relationships, including good communication practices with relevant production department staff. Participate in annual physical inventory as determined by the Company. Maintain a neat and organized work area according to established corporate policies, procedures, and safety regulations. Perform other work assignments, as requested or required. Requirements High school diploma or GED. Minimum 2-3 years' experience in a manufacturing environment, or equivalent military experience, or college degree. 2-3 years' experience operating food processing machinery is preferred. Mechanical aptitude and adept with tools and equipment, including ability to accurately complete required paperwork. Demonstrated leadership skills and interpersonal skills with ability to work successfully both independently and as a part of a team. Ability to communicate effectively, both verbally and in writing. Willing to work any shift as necessary. Willing to work overtime as necessary or required. Benefits Top out on 1-year anniversary Medical, Dental and Vision benefits start Day 1 Three weeks' vacation Annual Bonus Program Company match 401k Free premium pet food Uniforms, safety footwear and PPE provided Tuition Reimbursement On the Job training Climate Controlled, state-of-the-art manufacturing facility Come as you are. We value diversity in all forms and know the power it can bring. Workplace equality allows for creative ideas to bloom, diverse points of views to be heard, and increases overall happiness. That sounds pretty good to us. Champion is an equal opportunity employer and does not discriminate on the basis of race, color, religion, sex, national origin, sexual orientation, gender identity, disability, age, veteran status, or any other status protected by applicable law. The base pay range for this position at commencement of employment is expected to be between the range listed above, however, base pay offered may vary depending on multiple individualized factors, including but not limited to, market location, job-related knowledge, skills, and experience. The total compensation package for this position may also include other elements, if eligible, including variable pay, medical and dental benefits, participation in 401k plan, and paid time off benefits. Eligibility for these additional elements depend on the position offered and the employee's work schedule (i.e., part-time schedule, store associate). Details of participation in these benefit plans will be provided if an applicant receives an offer of employment.

Description: The Quality Technician is responsible for supporting the various departments in assuring that the requirements of the customer(s) and quality management system are being met throughout each department. The QT contributes to the continuous improvement and quality efforts of Mi Metals. Quality Technician: 1st Shift (start time and end time may vary slightly depending on audit and investigation needs). Position reports to Continuous Improvement and Quality Manager. Job Description Details: Trains motivates team members to achieve desired awareness of quality management system and procedures, work instructions, processes and help ensure employees adherence to those standards. Prepare test samples for Tensile testing. Perform tensile test and document results per customer requirements. Perform and/or Review First Article Inspections (FAI's) using hand tools such as calipers, micrometers, and optical comparators. Perform dimensional inspection layouts using Keyence vision system. Dock Audits to be performed daily. Coordinates and performs quality audits and reports findings to the appropriate personnel. Identify areas for improvement in quality control processes. Ensuring test equipment and tools are calibrated and working correctly. Assists with investigations for root causes and corrective actions. Maintains all internal calibrations. Perform process audits on a regular basis per deployed schedule. Report non-conformance issues to proper personnel; communicate with various personnel issues relating to quality. Support quality projects as needed or required. Attend meetings as required. Maintain a clean and safe environment. Perform other duties as required or assigned. Requirements: Required Qualifications: Knowledge, Skills, and Abilities Knowledge of computer programs including Microsoft Word, Excel, Outlook, PowerPoint, One Note, Teams, and other software programs such as ERP systems. Excellent verbal and written communication skills with all levels of the organization and ability to train. Must be competent in the use of measuring instruments such as (calipers, micrometers, tape measure, webster). Knowledge of or the ability to learn testing and measuring equipment (Instron (tensile testing) and Keyence (measurements)). Ability to accurately read, interpret and explain blueprints, engineering drawings, specifications and standards. Education, Certification/License & Work Experience: High School Diploma or equivalent 2 -4 years of related experience preferred. ASQ Certificates Desired: CQT (Quality Technician) CQA (Quality Auditor) Note: Certifications are not a requirement. Dependable to adhere to schedule with prompt punctuality and excellent attendance.

Fluidra's looking for a Quality Technician to join our team in Portland, TN. WHAT YOU WILL CONTRIBUTE The Quality Technician position at FLUIDRA will be responsible (under limited supervision) for maintaining quality standards by reviewing, analyzing and disposition of incoming and in-process materials resulting from customer returned products (RMA Analysis) and/or internally rejected materials (MRB) from any area within the Supply Chain process (Receiving, manufacturing, warehouse / handling and inspection areas), recording any quality results and maintaining quality records per company policy. The QC Inspector shall be experienced in writing NCMR's (non-conforming material reports through Oracle preferably) and documenting Corrective Actions Reports for Quality Engineers as well as utilizing emails to communicate these rejections/CARs to buyers and Supplier's when needed. This person will interact with material handlers on a day-to-day basis as well as with Receiving, Production Planning/Scheduling and Inventory Control teams to assure accurate and efficient processing/movement of non-conforming materials both physically and in the ERP system which will include acceptance and disposition into the appropriate sub-inventory location of products mainly via the FLUIDRA MRB Meetings. At the same time, this person will ensure both the RMA and MRB areas are appropriately organized and cleaned including accuracy of product as per Oracle inventory requirements. This person will also support the Receiving Inspection area/process with material handling support to QC Inspectors when needed as well as visual inspections when materials require either sample or 100% inspections. Other duties or changes may apply depending on company/business needs. Additionally, you will: Responsible for routinely conducting departmental Quality and/or Safety Audits Perform inspections for compliance with specifications using blueprints, drawings, inspection procedures, and prior knowledge of fabrication methods to evaluate if deficiencies are present in systems, structures, assemblies, or parts. Conduct in-process and final inspections at various checkpoints during maintenance activities. This includes installations or repairs of removed, disassembled, repaired, and assembled equipment; installation of structures, systems, and associated components; equipment to eliminate work hold-ups and rework; and to ensure conformance to specified requirements. Interpret inspection acceptance/rejection criteria to identify discrepancies and non-conformances. Assemble pertinent information and materials necessary to effectively accomplish planning, scheduling, inspections, and reporting of inspection results. Interpretation and judgment of the acceptance/rejection of an item is based on a review of the work against the written requirements. Judgment and interpretation is based on training and experience. Conduct training of lower level and same level inspection personnel by demonstrating the proper techniques for performing Quality Control inspection, interpreting inspection results, documenting inspection results, documenting non-conformances, and reviewing and closing out of completed work order tasks and associated inspection documentation. Evaluate the adequacy of specific programs used to train and test inspection, examination, and testing personnel. Develop, write, review, and approve inspection, examination, and testing procedures and evaluate the adequacy of such procedures to accomplish the inspection, examination, and test objectives. Conduct surveillances, observations and submit reports and recommendations. Analyze data from surveillances and observations of work activities and documentation to identify problems. Summarize data and major points and submit reports to management for review and action. Maintain files, charts, and status reports on progress of inspections and documentation. Assist in developing new procedural controls to address the quality control aspects of the Quality Management System (QMS) Perform independent oversight of S.R. Smith programs and processes through use of performance-based techniques. Responsible for written and verbal reporting of the conclusions of the assessments under the cognizance of a lead auditor. Routinely monitor plant and industry information to remain cognizant of assigned technical areas, and interface with line personnel, industry contacts, and regulatory agencies. Perform other duties as assigned. WHAT WE SEEK 5+ years of quality control inspection experience or equivalent combination of education and experience required to perform at this level. Must have experience both in MRB and RMA's areas including analysis and disposition of product as well as accurate segregation to prevent unintended use. The ability to interpret engineering specifications/drawings for disposition of products. Interpersonal skills, written and oral communication skills sufficient to organize, maintain and collaborate with other departments to accurately complete paperwork, understands documentation and effectively communicates with fellow employees for disposition of products. Extreme attention-to-detail, especially in the documentation of Non-Conforming product, Corrective Actions and disposition of materials. Proficiency in the use of Microsoft Excel and Microsoft Word as well as email's. Basic knowledge of measurement instruments (e.g., microscope, optical comparator, caliper, micrometer, pins gauge and gauge blocks). Good arithmetic skills are required. Must have good English written and verbal communication skills. Forklift driver certified a plus. EDUCATION • High school diploma or equivalent required WHAT WE OFFER An exciting opportunity to dive in and begin your career with a company that offers a competitive total rewards package that includes: 2 weeks of paid vacation 11 paid Holidays Full range of health benefits including medical, dental & vision, short & long-term disability 401(K) matching (100% of first 3% contributed, 50% of the next 2%) Health and wellness programs / gym reimbursement Educational assistance up to $7,000 per year Company sponsored FUN events! Generous product discounts WHO WE ARE Fluidra is a publicly listed company focused on developing innovative products, services and IoT solutions for the residential, commercial and wellness pool markets, globally. The company operates in over 45 countries, has over 7,000 employees and owns a portfolio of some of the industry's most recognized and trusted brands: Polaris , Jandy , CMP, S.R. Smith, and Zodiac . We also sell products under the Cover‐Pools , iAquaLink , Grand Effects , Dell and Nature2 names. With these combined resources we're able accelerate innovation in critical areas like energy-efficiency, robotics and the Internet of Things. Our focus is on creating the perfect pool and wellness experience responsibly. We take our mission to heart, and our employees embody these guiding principles in everything we do: passion for success, honesty & trust, customer collaboration, teamwork and inclusion, learn and adapt, excellence and innovation. Don't meet every single requirement listed? At Fluidra, we thrive on building an inclusive workspace, so if you are excited about this role and your past experience doesn't align perfectly, we encourage you to apply anyways! You may be just the right candidate for this role or another role in the organization. Fluidra is proud to be an equal opportunity employer. Fluidra recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, sex, disability, age, veteran status, or any legally protected characteristic. #zip #LI-MG1

REQUIREMENTS: We seek flexible team members who have a minimum of three years work experience after graduating high school, with two years industrial experience preferred. A high school diploma/ equivalent is required. Must be willing to work rotating shifts on a weekly basis and available for work any day of the year including weekends and holidays. MAJOR RESPONSIBILITIES: As the technician moves through the Logan Star Point roles, will act as Team Leader, document appropriate information, facilitate Team meetings. As an experienced OT, will be able to evaluate ones own as well as Team performance, being accountable to initiate or raise the question of the need to continuously improve and to drive the Team to a state of “resilience”. When serving as Team Personnel Rep, will manage the Team's manpower, appraisal process, Pay for Progression points and training guidelines; monitor time sheet accuracy; act as a call-in contact; and coordinate the Team's hiring process. As Team Performance/Quality Rep, will manage dispositioned metal flow; monitor Hold Ticket and Data input accuracy; attend quality meetings; oversee on-shift dispositions; attend customer/supplier meetings; and support Level 1 audit control plan. When serving as Team Production Rep, will track and relay production information; interface with Production Planning; and control Team spending to budget. When serving as Team Safety Rep, will audit; produce incident reports; monitor housekeeping; participate in Environmental and Housekeeping walk-thrus; attend scheduled meetings; track safety-related equipment repairs; manage annual training and documentation; and manage new hire orientation. As Administrative Rep, the OT will produce Team monthly reports; oversee production reporting; and manage process control. Will operate all production machinery and mobile equipment. OT may also be expected to draft maintenance work orders, make suggestions to Maintenance planners and lead operator roles during outages. Will rotate shifts as required by Team, unit and/or Company policies and procedures. May be responsible for the handling, inspection, packaging, shipping and transportation of hazardous waste and for compliance to applicable regulatory requirements. ADDITIONAL INFORMATION: Excellent communication skills and effective problem solving skills required. Customer/supplier thought process preferred. Willingness to work in a self-managed team environment is necessary. Consensus building is a vital skill. Ability to support a positive, challenging and participative work environment required.

Job DescriptionSalary: $28.50/HR The Engineering Technician IV serves as a critical technical resource supporting the USDA Natural Resources Conservation Service (NRCS) in Tennessee. This role provides field-based engineering assistance to NRCS staff across designated Area and Field Offices. Technicians are responsible for conducting engineering surveys, assisting with project implementation, performing construction inspections, and supporting documentation and compliance efforts. The position plays a vital role in advancing NRCSs conservation mission by ensuring timely, accurate, and safe execution of engineering tasks in diverse field environments Key Responsibilities Conduct engineering surveys and inspections for conservation projects Assist with project documentation, implementation, and reporting Operate and troubleshoot surveying equipment (e.g., GPS, total stations) Develop and interpret engineering drawings using AutoCAD/Civil 3D Maintain accurate construction diaries and compliance documentation Ensure adherence to NRCS specifications, OSHA safety standards, and environmental regulations Travel to field sites and other NRCS offices across Tennessee as needed Communicate effectively with NRCS staff, contractors, landowners, and regulatory personnel Work Environment Fieldwork in varied weather conditions and terrain Exposure to construction sites, water bodies, agricultural areas, and CAFOs Use of ATVs/UTVs after certification Office-based tasks including data entry, reporting, and coordination Benefits: Paid sick leave, Medical/Dental (optional), 401 (k) Retirement Plan (optional), Employer Paid Life Insurance, Employer Paid Short Term Disability, Optional Life Insurance. ELYON International, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job DescriptionBenefits: 401(k) Opportunity for advancement Paid time off Benefits/Perks Competitive Compensation Great Work Environment Career Advancement Opportunities Job Summary We are seeking a Mover/Production Technician to join our team! As such, you will be traveling to a different location each day, ensuring boxes and furniture are properly wrapped, and loading everything specified into a vehicle. You will also be responsible for securing the load properly to ensure nothing is damaged or destroyed, unloading the items at the destination, and providing excellent customer service to our clients. You will also be expected to help clean house contents once back at our location. The ideal candidate is comfortable working in all weather conditions, has strong customer service and communication skills, and can comfortably work on their feet lifting heavy objects. Responsibilities Travel to each location and ensure all boxes are properly packed, and all furniture is ready to move safely Load everything into the truck or vehicle with the team, taking care to make sure everything is well organized and the load is properly distributed Secure all boxes, furniture, and equipment before moving Unload all boxes, furniture, and equipment, placing them in the designated rooms as noted by the owners Maintain a safe, clean work environment Qualifications Strong communication and customer service skills Works well in a team environment Can comfortably work in all weather conditions Can lift and move heavy objects Can work on your feet for much of the day

At Lilly, we unite caring with discovery to make life better for people around the world. We are a global healthcare leader headquartered in Indianapolis, Indiana. Our employees around the world work to discover and bring life-changing medicines to those who need them, improve the understanding and management of disease, and give back to our communities through philanthropy and volunteerism. We give our best effort to our work, and we put people first. We're looking for people who are determined to make life better for people around the world. Organization Overview: Lilly is currently constructing an advanced manufacturing facility for production of API (Active Pharmaceutical Ingredient) molecules located in Lebanon, IN. This facility is Lilly's largest investment in manufacturing capacity and is intended to provide APIs for current and future products, including new modalities. This is a unique opportunity to be a part of the startup team for a greenfield manufacturing site, and the successful candidate will help to build the processes and facility to enable a successful startup into GMP manufacturing operations. Position Brand Description: The Operators for API manufacturing operations are directly responsible for the production of API molecules used in Lilly medicines. Operators will be responsible for upholding a safety-first, quality-always mindset in the production of API while running a production process that incorporates a wide range of unit operations. In the project delivery phase and startup phase of the project (startup expected 2025 to 2027), roles will be fluid and dynamic as we endeavor to support the project delivery, build a new organization, develop and implement the necessary systems and business processes required to support GMP operations, and build the site culture. This will require significant collaboration, creativity and resilience as the site grows to a full scale GMP manufacturing through start up. Responsibilities: * Maintain compliance with all regulatory requirements at all times. * Support the execution of the production plan for the site. * Carry out daily monitoring testing and cleaning duties as assigned on the above listed systems to ensure equipment and systems are in good operating conditions and they are maintained in accordance with local and corporate regulatory requirements. * Enter Trackwise events, participate in and lead CAPA investigations * Troubleshoot and diagnose process problems and take appropriate actions to minimize deviations or site impact * Understand Health, Safety & Environmental-regulated environment and application of Health & Safety/Process Safety standards in order to execute key/critical GMP duties. * Understand other area processes & their operational hazards and being able to react appropriately. * Monitor and collect data on equipment use and performance i.e. trying to anticipate potential equipment reliability problems. * Work with Maintenance and Technical Support to respond appropriately to potential utility supply upsets or equipment failure. * Contact the appropriate help if there is a problem or an event (spill/deviation/incident) during processing. * Communicate to other shifts regarding the status of the area operations and details of any issues/problems that have occurred at handover. * Actively participate in assigned building & area operations such as safety audits, procedure co-ordination, housekeeping and improvement projects. * Be trained and qualified on all specified unit operations within the building. * Identify concerns for informal or formal discussion (shift meetings, safety representative). * Know and follow cGMP practices, safe work habits, plant dress code, hygiene standards, and housekeeping requirements unique to the work area and job classification. Basic Requirements: * High School Diploma or equivalent * Qualified candidates must be legally authorized to be employed in the United States. Lilly does not anticipate providing sponsorship for employment visa status (e.g., H-1B or TN status) for this employment position. * Completion of Post Offer Exam or Completion of Work Simulation if applicable. * Ability to effectively communicate (electronically, written and verbal). * Basic computer skills (desktop software) are required. Additional Preferences: * Previous experience in facility/area start-up environments * Previous experience in a pharmaceutical manufacturing operation with PSM-regulated/hazardous chemicals * Ability to assume leadership and prioritize daily priorities without direct supervision * Solid understanding of FDA guidelines and cGMP requirements * Strong organizational skills and ability to handle and prioritize multiple requests * Knowledge of lean manufacturing principles * Flexibility - ability to troubleshoot and triage challenges * Ability to understand technical nomenclature and language as well as work with mathematical formulas * Manual material handling as appropriate * Bend, reach, stretch, climb ladders, and work in tight spaces * Stand for long periods Additional Information: * Ability to work rotating 12-hour day or night shifts * Ability to work flexible schedules during startup period * Ability to work overtime as required Lilly is dedicated to helping individuals with disabilities to actively engage in the workforce, ensuring equal opportunities when vying for positions. If you require accommodation to submit a resume for a position at Lilly, please complete the accommodation request form (******************************************************** for further assistance. Please note this is for individuals to request an accommodation as part of the application process and any other correspondence will not receive a response. Lilly is proud to be an EEO Employer and does not discriminate on the basis of age, race, color, religion, gender identity, sex, gender expression, sexual orientation, genetic information, ancestry, national origin, protected veteran status, disability, or any other legally protected status. Our employee resource groups (ERGs) offer strong support networks for their members and are open to all employees. Our current groups include: Africa, Middle East, Central Asia Network, Black Employees at Lilly, Chinese Culture Network, Japanese International Leadership Network (JILN), Lilly India Network, Organization of Latinx at Lilly (OLA), PRIDE (LGBTQ+ Allies), Veterans Leadership Network (VLN), Women's Initiative for Leading at Lilly (WILL), en Able (for people with disabilities). Learn more about all of our groups. Actual compensation will depend on a candidate's education, experience, skills, and geographic location. The anticipated wage for this position is $17.30 - $34.38 Full-time equivalent employees also will be eligible for a company bonus (depending, in part, on company and individual performance). In addition, Lilly offers a comprehensive benefit program to eligible employees, including eligibility to participate in a company-sponsored 401(k); pension; vacation benefits; eligibility for medical, dental, vision and prescription drug benefits; flexible benefits (e.g., healthcare and/or dependent day care flexible spending accounts); life insurance and death benefits; certain time off and leave of absence benefits; and well-being benefits (e.g., employee assistance program, fitness benefits, and employee clubs and activities).Lilly reserves the right to amend, modify, or terminate its compensation and benefit programs in its sole discretion and Lilly's compensation practices and guidelines will apply regarding the details of any promotion or transfer of Lilly employees. #WeAreLilly

Description Job Title: Production TechnicianJob Status: FULL TIME 3rd ShiftSalary: $19.25 - 3rd Shift ($17.75 Base Rate + $1.50 Shift Premium) Benefits: 14 Paid Holidays 3 Weeks Paid Time Off Annually Weekly Payroll Comprehensive Insurance (Medical, Dental, Vision) 401k Match Job Overview: MARELLI is seeking dedicated Production Technicians for immediate openings on the 3rd shift. The role involves semi-skilled assembly, machine operation, and general production activities on the assembly line.Responsibilities: Assemble components and sub-components manually or using machinery/tools on the assembly line. Perform tasks requiring standing or repetitive motions (e.g., gripping, reaching, bending, pushing, or pulling). Move materials/products within the work area (lifting up to 40 pounds). Participate in periodic cross-training and transition from simple assembly to machine operations. Conduct record-keeping for production reports, checklists, time-keeping, and scrap/reject results. Work in environments with exposure to welding fumes, chemicals, noise, or vibrations. Requirements: Previous factory/manufacturing experience is a plus. No High School Diploma or GED required. Basic grammar and math skills. Effective communication skills. Ability to work a standard 40-hour week, with overtime as required. Additional Information: MARELLI is an Equal Opportunity Employer. Employment decisions are based on qualifications without regard to race, color, religion, sex, sexual orientation, national origin, gender identity, genetic information, disability, protected veteran status, age, or any other legally protected group status. Candidates must be legally authorized to work in the United States and provide proof of eligibility at hire. Visa sponsorship is not available.Related Job Titles/Functions: Production Worker, Assembly Line Technician, Assembly Worker, Manufacturing Technician, Assembly Line Worker.