Momentive jobs in Portland, OR

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27882 Purpose To provide technical and process support for PC Board manufacturing operations. Job Duties and Responsibilities Provides technical and process support related to PC Board production, prototype, and process development. Uses schematics, diagrams, written and verbal descriptions or defined plans to perform testing and troubleshooting on electronic or mechanical components, equipment or systems. Gathers, maintains, formats, compiles and manipulates technical data using established formulae and procedures and performs detailed mathematical calculations. Address concerns reported through employee suggestion and near-miss systems. Encouraged to initiate changes for continuous product and process improvement. Basic Requirements Minimum of a high school education or GED is required. Minimum 5 years of work experience or Associate Degree in related field. Rotational availability between 1st and 2nd shift is preferred. Has full proficiency in a range of technical processes or procedures (or deep skills in a single area) through job-related training and considerable work experience Completes a variety of atypical assignments Works within defined technical processes and procedures or methodologies and may help determine the appropriate approach for new assignments Works with a limited degree of supervision, with oversight focused only on complex new assignments Acts as an informal resource for colleagues with less experience Effective written and oral communication skills. Strong desire to take ownership and drive results. Ability to analyze data to drive decision making. Good organizational skills and computer skills. Proficient in the use of MS Office including but not limited to Word, Excel, PowerPoint. On an as needed basis, train, assist and observe other department personnel (as qualified) on the department equipment and/or process for improvements such as but not limited to safety, quality, ISO 14001 & 45001 and manufacturing proficiency/efficiency. Environmental Health & Safety (EHS) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS and JHA procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS procedures are contained in reference books such as SSW Specifications, Plant Rules and Regulations. Safety Data Sheets are stored electronically and available 24/7. In an emergency SDS may be accessed at Security. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS and JHA procedures. Personal Protective Equipment: See Department PPE Chart Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Research & Development Req ID: 27300 Purpose To design, develop and evaluate welding machines and associated processes; to conduct applied research into new areas of welding machine design and/or on new welding processes. Job Duties and Responsibilities Utilizes and applies experience in a broad range of fields to understand weld machine development process and interactions between machine design and weld process development/optimization; collaborates with team members and members of the department, providing the benefit of this understanding to enhance the execution of projects Develops new welding machines, software, welding processes and/or test methodologies in accordance with company policies/procedures and in consideration of: Market needs, requiring direct interface with customers, sales and marketing Industry codes, standards, and specifications, and Manufacturing process capabilities, requiring direct interface with manufacturing and methods personnel Establishes standards and methodologies for and conducts evaluations of product performance Develops/refines test methods, as applicable, to support new product development, product evaluations, and competitive benchmarking Facilitates development of manufacturing process capabilities to support introduction of new products Works with minimal direct supervision, conferring with superiors as needed; has appreciable latitude for independent action or decision May provide task oriented direction to Technicians, Technologists and/or Engineers Level I/II/III in the execution of development projects Structures projects for and provides supervision and mentoring to Engineering Interns Maintains records of all work in process and documents interim/final results in the applicable format; these include Project Definitions, Milestone Plans, ES Reports, Technical Reports, Project Tracking Progress Reports and presentations at meetings, seminars, and conferences Basic Requirements Baccalaureate degree in Engineering (or equivalent). Degree in Welding Engineering preferred. Minimum 8 years engineering experience. Processes and applies a broad knowledge of engineering and scientific principles, practices and procedures, within the field of specialization, to the completion of difficult assignments. Computer literate with working knowledge of MS Word, MS Excel, MS Access and MS PowerPoint, as a minimum. Possesses and applies both practical and fundamental understanding of various arc welding processes. Experience with Robotic Programming. Experience with numerical modeling tools including Python is a plus. Excellent written and verbal communication skills. Works effectively in a cross-functional team environment Job Rate: Salary Grade ***The established grade and range for this job is listed above. All applicants should understand that, if selected for a posted job, the actual pay rate will generally fall within the range of the stated grade. Most typically, the pay rate will be set towards the lower end of the range and may vary slightly, depending upon candidate qualifications. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Maintenance Req ID: 27480 Purpose Troubleshoot, repair, inspect, and maintain power transmission, hydraulic, and pneumatic components on production equipment and systems. Job Duties and Responsibilities Mechanically troubleshoot, repair and maintain all types of industrial machinery, equipment and systems. Troubleshoot, inspect, adjust, and repair automated machines, process systems, and robotic systems to ensure they are working properly and safely. Performs equipment failure analyses (including preventative and unscheduled maintenance). Plan and implement preventative and predictive maintenance programs to maximize equipment up time. Perform bench work in repairing and maintaining production equipment and spare part assemblies. Keep neat orderly records and order spare parts. May be required to train fellow tradesmen. Must be able to rotate shifts and work weekends and holidays as required. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Basic Requirements Associate degree in Mechanical Technology is preferred or equivalent job experience. Must pass the skilled trades assessment test for this position. Must have some knowledge of mechanical troubleshooting including power transmission, fluid power, and pneumatics. Ability to read, write, and understand written specifications, procedures and prints. Ability to design and execute from verbal instructions. Must possess good organizational and communication skills. Must possess good mechanical aptitude and have the ability to work on close tolerance equipment and/or parts. Ability to use various measuring devices (torque wrench, micrometers, Vernier calipers, dial indicators etc.) Must be able to use math to calculate dimensions and determine equipment setups. Ability to fabricate, weld, or machine parts preferred. Ability to operate basic shop equipment (hoist, forklift, scissor lift, etc.) preferred. Excellent attendance required. Safety and quality conscious. Capable of lifting up to 75 pounds on an occasional basis. Must be able to work in confined areas, climb ladders, and work at heights of 28 feet. Must be able to wear a respirator. Must be willing to continuously improve technical skills and knowledge of plant equipment and systems. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

ESSENTIAL FUNCTIONS Support the development of structural design for low- to medium-complexity modular steel buildings. Prepare structural 3D models, perform static and dynamic calculations, and generate technical documentation such as workshop drawings, lifting and anchoring layouts, and specifications. Apply international, national, and internal standards, ensuring that all designs are safe, compliant, and cost-effective. Integrate good engineering practices into every stage of the design process. Actively participate in project kick-off and coordination meetings, and engage with cross-functional teams including architectural, electrical, mechanical, manufacturing, and site engineers to ensure a cohesive project execution. Support the review and technical approval of workshop documentation and supplier RFQs. Specify materials, services, and necessary certifications for project execution. Provide technical support during fabrication and assembly. Collaborate with site managers, manufacturing, quality control, and commissioning engineers to resolve structural issues and ensure safe and efficient implementation. QUALIFICATIONS Bachelor's Degree in Mechanical or Structural Engineering or acceptable experience Professional engineering (PE) License - optional Minimum 5 years of mechanical/structural engineering experience Proficiency in Tekla, Revit, AutoCAD or Creo, SCIA Engineer, anchoring design tools, and MS Office Attention to detail, analytical thinking, creativity, problem-solving, organization, flexibility, and strong team collaboration Experience reading and interpreting construction drawings and equipment specifications, customer specifications Knowledge and understanding of local and national building codes Must have the ability to research new designs, technologies and construction methods of data center equipment and facilities TRAVEL REQUIREMENTS 15 - 25% Domestic and International travel required The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development Promote Transparent & Open Communication At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $8.0 billion in sales, a strong customer base and global reach in nearly 130 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. #LI-CM1

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: Min: 63,800 - Mid - 88,800 Bonus Plan:Profit SharingProfit Sharing % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22821 Employment Status: Hourly Full-Time Function: Maintenance Req ID: 27095 Purpose Ability to machine, mill, and grind various types of metals. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Maintenance Machinist A. Reports directly to the department Manager. Job Responsibilities Performs all tasks under general supervision. Provides training and assistance to less experienced Machinists. Assumes ownership of work task and demonstrates initiative to get work completed. Creates and reworks machinery and equipment components according to requisition documentation, blueprints, or other drawings. Sets up equipment operation feed, speed and temperature. Follows established procedures for operating various conventional and/or CNC (computerized numerical control) manufacturing equipment for tasks such as cutting, punching, forming, drilling, tapping, turning, milling, grinding, and stamping to fabricate, form or shape manufactured parts, tools or parts assemblies from raw materials. Selects and measures raw materials and parts to specifications to prepare for production processing. Performs reworking and machining of new and spare production parts for departments. Repairs maintenance parts as needed. Verifies the accuracy of work by using calipers, micrometers, dial indicators, and various measuring instruments. Order and maintain project related material as required. Assist with keeping neat and orderly records on work performed and repairs made. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager Basic Requirements Must pass the skilled trade assessment test for this position. Must have a basic knowledge and experience reading mechanical drawings. Must have a basic knowledge and experience in proper machining and grinding techniques (Feed rates, sequencing, cutting speeds). Must have a basic knowledge and experience in setting up machine tools to produce precision parts. Must have a basic knowledge and experience in writing and modifying machine programs. Must be able to use math to calculate dimensions and determine speeds and feed rates. Ability to use various measuring devices (calipers, micrometers, dial indicators, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 26250 Employment Status: Salary Full-Time Req ID: 27769 Primary Function Supports sales and estimating activities in the Defense industry segment with a particular emphasis on the U.S. Navy, in particular replacing cast and forged components with additively manufactured components, by fostering key customer relationships, identifying new business opportunities and customers, creating proposals and quotes, negotiating and closing sales, and maintaining knowledge of current market conditions and technologies. Job Duties Interact with customers, sales, estimating and engineering team members to generate quotes, and maintain customer relationships. Assist in reviewing DOD contracts and technical publications/specifications. Use state-of-the-art CAD and additive manufacturing software in support of accurate quote estimates. Actively manage incoming leads and follow-up, maintain digital distribution list. Manage Additive Salesforce relationships, leads, and opportunities. Maintain database of new contacts, accounts and opportunities. Create dashboards and issue periodic reports. Assist in market research and outreach: identifying promising markets and engaging the customer base in those markets, develop sales tools content. Assist Marketing with trade show planning, setup and participation as required, as well as content for brochures, articles, social media, etc. Possess a strong understanding of our value proposition, product offering, our competition in the industry, and positioning. Follow the latest industry developments and stay up to date on competitors. Assumes additional duties as needed or directed in support of the Company's 2025/2030 Strategies. Requirements U.S. citizen. Bachelor's degree required, Engineering preferred. 3+ years proven track record in engineering sales or related market. Previous experience in welding, additive manufacturing or related fields preferred. Demonstrated communication skills - verbal and written. Computer literate with working knowledge of MS Office (i.e. Word, Excel, PowerPoint) and CAD (e.g. Solidworks, Autodesk, etc). Familiarity with CRM tools is a plus Technical skills required to understand and propose products or solutions by focusing on client requirements, including well-versed in welding metallurgy, mechanics of materials, and material/process technical specifications. Ability to communicate information, whether technical or non-technical to staff members and customers, in a clear and concise manner. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: $22.51-$29.00 Target Bonus: 5.0% Req ID: 26396 Job Responsibilities Take direction from Leader and/or Supervisor Provide training and assistance to new employees. Provide feedback on job status to Electric/Pneumatic Assembly Supervisor. Assist in start-up/de-bug of equipment. Assure good craftsmanship on jobs that are being built. Follow and enforce good housekeeping practices with all department personnel. Know and understand due dates for jobs and schedule work accordingly. Work with Controls Engineers to correct any problems with design of the machine/controls. Recommend as appropriate work methods and/or materials that will improve existing designs. Travel as needed to assist in installations, de-bug, tryout, or problem solving at customer locations. Follow-up with supervisor on daily basis to report progress of job(s) being worked on.. Recommend, initiate, or follow-up on engineering changes and document according to procedure(s). Assist in packing and loading of machines for shipment. Fill-in where required for absences. Order material and follow-up with Receiving when required. Must know how to read and interpret build prints. Job Requirements Education: High School Diploma required. Journeyman's card or Journeyman status preferred Experience: 5 years minimum experience as industrial pipefitter Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Req ID: 27359 Primary Function Analyze, review and repair failed PC Boards and AOI. Responsibilities Understand and perform associated quality procedures used to process items in work center. Repair and rework assembly line and in-process PC board failures. Repair and rework in-process AOI or X-Ray failures. Identify and enter PC Board failure information and accountability into MES. Comply with Plant Rules and Regulations, Factory, and Operation specifications. Follow all applicable ESD procedures. Obtain and return SMT components from / to fixed location. Operate AOI equipment as trained. Sort PCB assemblies as acceptable or need repair. Able to utilize X-Ray equipment to determine defects/solder abnormalities. Notify placement equipment operators of upstream issues. Notify QA personnel and MAS of processing / operator errors and issues discovered. Notify scheduler, MAS, and QA personnel when high percent of failures are occurring. Interact with Supervision, Maintenance, Manufacturing Engineering, R&D and Plant Engineering to resolve equipment, procedural, and/or finished assembly problems. Cross training of employees to provide flexibility will be required. Skills and Aptitude Have excellent people, organizational and communications skills. Must have an uncompromising attitude towards quality. Excellent attendance, safety and work record. Must be self-motivated. Working knowledge of production and manufacturing floor control systems. Knowledge of Excel spreadsheets, MS Access database and Word application. Ability to lift 60 pounds on an occasional basis. Must be knowledgeable of quality procedures used in the manufacturing department and how they relate to the needs of the customer. Safety, workmanship, product quality and productivity in the performance of the job. May require shift rotation. Must be knowledgeable on soldering as dictated by QC-306. Training The Supervisor/Manager shall determine when an individual has completed the training and is qualified to assume these responsibilities. The Supervisor/Manager shall ensure that the employee receives “on the job training”, and the following training at the appropriate times. See Lincoln specification RE150 for training requirements. Environmental, Health, and Safety Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS, and JHA procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS procedures are contained in reference books, such as SSW Specifications, Plant Rules and Regulations, and Material Safety Data Sheets, which are located in the Foreman's area. Immediately notify the Production Team Lead if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS, and JHA procedures. Make sure all containers of chemicals used for this job are compatible with the material in the container and are properly labeled with a GHS label and stored per company policy when not in use. Make sure all equipment spills, leaks and chemicals are properly contained and cleaned up and trouble call entered for repair. Best efforts shall be used to reduce, reuse or recycle waste while performing the duties and/or tasks associated with this job and segregate waste per company policy. Participants in EHS initiatives as required by department and employee objectives and goals. Personal Protective Equipment Safety glasses with side shields Safety toe, ESD work shoes Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Range: ($24.00/hr - $38.00/hr) Target Bonus: 5.0% Req ID: 27586 Summary Fori Automation, a Lincoln Electric company, is a global leader in designing and integrating automated assembly, welding, material handling, and testing systems. We deliver world-class automation solutions to leading manufacturers worldwide. We're seeking an experienced Mechanical Designer to join our Weld Systems team in Shelby Township, MI. In this role, you'll design and develop mechanical systems for automated welding equipment, ensuring precision, performance, and manufacturability. At Lincoln Electric, we invest in our people. In addition to competitive pay, we offer an annual bonus plan, tuition reimbursement, comprehensive medical/dental/vision benefits, 401(k) with company match, paid time off, and many other outstanding benefits. What You'll Do Develop mechanical concepts and detailed designs using 2D and 3D CAD tools. Focus design on tooling and fixture creation. Create accurate Bills of Materials (B.O.M.) and design documentation. Apply engineering calculations to verify design integrity (e.g., beam stress). Utilize standard designs, specifications, and part/vehicle data to build robust systems. Organize and maintain CAD files in accordance with company and project standards. Select appropriate materials and components for optimal performance and cost. Ensure all designs meet NAAMS standards and relevant industry standards for construction, safety, and ergonomics. Collaborate with cross-functional teams to deliver high-quality automation systems on time. Required Education & Experience Bachelor's degree in Mechanical Engineering preferred (or equivalent experience). 1+ year of design/layout experience (or 2+ years in a similar role without degree). Experience designing MIG and/or resistance weld machines preferred. Proficiency in 3D CAD (Inventor, SolidWorks, or similar) and 2D AutoCAD. Strong grasp of manufacturing principles, materials, and design best practices. Ability to perform basic engineering calculations and apply advanced algebra and design techniques. Team-oriented mindset with the ability to thrive in an ISO9001:2000 environment Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Req ID: 27647 Purpose Design, implement, and maintain embedded software components for use in end products. Continually improve development techniques in order to create software more efficiently and reliably. Apply engineering knowledge to provide creative software solutions for real world customer issues and use cases. Job Duties and Responsibilities Develop multithreaded controls with industrial Real Time Operating Systems and Embedded Linux using C and C++ languages. Developing software for communication with industrial automation networks (e.g. CAN, Ethernet/IP), Internet protocols (e.g. HTTP, FTP), and wireless (e.g. Wi-Fi and Bluetooth). Developing software for embedded graphical displays. Interact with key stakeholders including marketing, suppliers, customers, distributors, and sales engineers to drive new product innovation. Maintains records of all work in process and documents interim/final results in the applicable format; these include Project Definitions, Milestone Plans, ES Reports, Technical Reports, Project Tracking Progress Reports and presentations at meetings/seminar. Develop and refine automated test setups, frameworks, and methods for embedded systems, including unit tests, integration tests, and system-level test to support new product development, product evaluations, and competitive benchmarking. Coordinate activities of internal and external technical support personnel as required. Troubleshoot issues in development and production environments, ensuring rapid resolution and minimizing downtime. Reading and interpreting schematics and component data sheets. Assignments are broad in nature, requiring originality and ingenuity. Has appreciable latitude for unreviewed action or decision. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Basic Requirements Level II: Four-year Engineering degree is required and, Minimum of three (3) years Engineering experience. Level III: Four-year Engineering degree is required and, Minimum of five (5) years Engineering experience. Strong familiarity with embedded systems architecture, design considerations, and hardware-software interactions. Industry experience writing C for embedded platforms. Strong understanding of testing methodologies and frameworks for embedded systems Effective communication skills, with the ability to convey complex technical concepts to both technical and non-technical stakeholders. Ability to work independently and as part of a team. Excellent organizational skills. Ability to handle a constantly changing set of priorities. Initiative to take ownership of product designs. Possesses and applies a broad knowledge of principles, practices and procedures of field of specialization to the completion of difficult assignments. The selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Competencies Proficiency in C and C++ programming languages Knowledge of Real Time Operating Systems and Embedded Linux. Experience in developing software for industrial automation networks, internal protocols, and wireless communication. Professional experience with TDD, writing unit tests, automated testing, and continuous integration type frameworks. Familiarity with Azure DevOps and Agile development practices. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Maintenance and Reliability Director Build Your Career with an Industry Leader As the global leader of premium labels, Multi-Color Corporation (MCC) helps brands stand out in competitive markets and inspire positive consumer experiences. Backed by over a century of printing expertise, MCC is focused on the future-developing consumer-driven innovations and sustainable packaging solutions. Working for our team, you can truly make a difference. Position Objective The Maintenance and Reliability Director will focus on the deployment of Total Productive Maintenance (TPM) across Multi-Color Corporation in the Americas. This hands-on leadership role oversees a team of four and drives the implementation, execution, and continuous improvement of TPM principles across 38 manufacturing facilities. The Director enhances equipment reliability, operational efficiency, and fosters a culture of safety, quality, and continuous improvement. Key priorities include developing and executing the TPM framework, training and coaching plant staff, facilitating improvement projects, driving standardization and digital transformation, and ensuring alignment with MCC's business priorities Why Work at MCC Competitive compensation Comprehensive benefits package including medical, dental, vision, disability, life insurance, and 401(k). Paid holidays including New Year's Day, Memorial Day, Fourth of July, Labor Day, Thanksgiving, Christmas Eve, and Christmas Day. Opportunity to lead TPM transformation across a global network and make a lasting impact on MCC's operational excellence journey. Responsibilities Lead and execute the transformation and sustainability of the Total Productive Maintenance (TPM) program across the Americas organization. Develop and deploy TPM strategies aligned with corporate and divisional goals, ensuring long-term operational stability and reliability. Serve as a change agent to lead individuals and teams through TPM implementation and culture transformation. Train, mentor, and coach site leadership teams and maintenance personnel on TPM principles, tools, and methodologies. Identify, prioritize, and manage improvement projects to enhance process yield, reliability, and operational efficiency; ensure visual TPM compliance in War Rooms and at points of impact. Support plants in data-driven decision-making-using root cause analysis, condition-based monitoring, and predictive analytics to improve performance. Collaborate with cross-functional partners including Operations, Engineering, and Corporate Leadership to align TPM with business strategies. Develop and maintain standardized documentation and methodology to ensure consistent TPM deployment across all MCC sites. Promote a strong safety culture and ensure TPM integration with plant safety systems and risk mitigation initiatives. Manage department budgets, allocate resources effectively, and track performance to business priorities. Required Skills and Qualifications Bachelor's degree in Mechanical, Electrical, Chemical, or Industrial Engineering (or related field). Eight or more years of experience leading Maintenance and Reliability programs, with proven TPM deployment expertise. Strong working knowledge of Total Productive Maintenance (TPM) principles, strategies, and tools. Expertise in Computerized Maintenance Management Systems (CMMS). Proven leadership and coaching skills; ability to develop high-performing teams and influence across a matrix organization. Experience in Lean and Continuous Improvement methodologies for process optimization. Strong analytical and problem-solving skills; able to analyze data, identify risks, and make data-driven decisions. Excellent communication and collaboration skills; able to engage and influence stakeholders at all levels. Technical aptitude to integrate new technologies and digital solutions into maintenance practices. Proficient project management skills to plan, execute, and deliver cross-site improvement initiatives effectively. Ability to travel up to 75% (domestic and international as required). Diversity & Inclusion: Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law. If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. #AppcastOPT For over a century, Multi-Color Corporation (MCC) has crafted premium labels for the world's most iconic and recognizable brands. Our labels elevate emotional connections with consumers and help brands stand out in competitive markets. Honoring our rich history as a market leader, we focus on the future by developing sustainable packaging solutions and consumer-driven innovations. MCC combines global reach with the personalized touch of local service through our network of facilities across 25+ countries. More than 12,000 teammates come together to make our industry-leading work possible and bring our True Colors to life. Join us at MCC, where every product is Labeled with Care. Learn more at ***************** If you need assistance or an accommodation in applying, please contact our Human Resources Department at ***********************. Multi-Color is committed to providing equal employment opportunities and prohibits discrimination based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Macomb - Mile Req ID: 27991 Job Responsibilities PRIMARY FUNCTION Work in coordination with the Manager and other coworkers to ensure that all jobs are welded to the specifications of each job and meets the outlined requirements. JOB DUTIES AND RESPONSIBILITIES Operating equipment using safe work habits. Inspect welds and work pieces to acceptance of the standard they are working to. Measure work pieces with straight edges, tape measure, scale, or templates to ensure proper fit. Weld steel, stainless steel, aluminum, invar or other specified alloys per their qualifications and the applicable WPS. Clamping, holding, tack-welding, bracing, grinding or bolting component parts to obtain required configurations and positions for welding. Maintains safe operations by adhering to safety procedures and regulations. Lift or move materials and finished products using overhead cranes / hi-lo Able to read drawings and weld symbols Maintains continuity among work shifts by adhering to required documentation and communicating actions, irregularities, and continuing needs. Other duties as assigned EDUCATION AND EXPERIENCE High school diploma/GED, certificate in Machine Tool Technology or equivalent work experience Job Requirements PHYSICAL DEMANDS - Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.The employee frequently is required to stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The employee is required frequently to work from ladders and scaffolds. The employee is occasionally required to sit. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision. WORK ENVIRONMENT - Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock. The employee is frequently exposed to moving mechanical parts. Export Control Disclaimer: This position will include access to data, technology, and/or software source code that is subject to U.S. export controls under International Traffic in Arms Regulations (ITAR). Employment with The Lincoln Electric Company (D/B/A Baker Industries) is contingent upon either verifying U.S. person status or obtaining any necessary authorizations. Applicants will be required to answer certain questions for export control purposes and information will be reviewed by compliance personnel to ensure compliance with federal law. The Lincoln Electric Company, at its sole discretion, may choose not to apply for a license for such individuals whose access to export-controlled data, technology, and/or software source code may require authorization. The Lincoln Electric Company may also decline to proceed with an applicant on this basis alone. EQUAL OPPORTUNITY EMPLOYER -The Lincoln Electric Company provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, national origin, age, disability, or genetics. In addition to federal law requirements, Baker Industries complies with applicable state and local laws governing nondiscrimination in employment. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training. ATTENTION: THIRD-PARTY RECRUITERS -Lincoln Electric does not accept unsolicited resumes from third-party recruiters. Resumes submitted to any employee(s) of Lincoln Electric without a signed vendor agreement, by the Manager of Recruiting & Training, will become the property of Lincoln Electric. Verbal or written commitments from any other member of Lincoln Electric will not be considered binding terms. Lincoln Electric will not pay a fee to any third-party recruiter that has not coordinated their recruiting activity through the Recruiting Department. DISCLAIMER -This position may have access to various types of Controlled Unclassified Information (CUI) and/or information and tangible items subject to U.S. export controls, as well as be subject to certain customer/contractual requirements. Therefore, the individual selected for the position may be required to meet certain citizenship, immigration, and/or location-related requirements, as well as screenings, background checks and additional training. The Company, in its sole discretion, will determine whether or not to seek a contractual waiver or regulatory export authorization if required. Employment is contingent upon meeting applicable qualifications, as determined by the Company, as well as adhering to all relevant federal, state, and local laws and regulations. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Employment Status: Salary Full-Time Function: Research & Development Pay Grade and Range: US10-E-26 (Min $52,300 - Mid $66,700$52,300.00 - $81,100.00) Bonus Plan: Profit SharingProfit Sharing Target Bonus: Hiring Manager: Kyle G Smith Recruiter: Allison Schock Internal Candidate Eligibility Criteria: 1. Is a Lincoln Electric employee with at least 1 year of service 2. Is NOT on an active Performance Improvement Plan (PIP) Primary Function Work as part of Laser Group on the development of laser processing and parameter development in support of LECO products and systems. Work with lasers, optics, motion systems, welding torches, and/or power supplies to conduct process and parameter development. Work with Lincoln Electric Sales Team to develop and deliver laser solutions. Job Duties Perform, instruct and supervise testing of internal R&D efforts. Interact with suppliers, customers, distributors, and sales engineers on a regular basis. Perform other duties assigned by the supervisor. Usually works with minimum supervision, conferring with superior on unusual matters. Demonstrate laser processes for internal and external visitors to Laser Laboratory (EP-5). Travel to assist with installations/runoff at customer facilities. Assignments are broad in nature, requiring originality and ingenuity. Requirements Minimum High School Diploma/GED; Associates or Bachelor's in Engineering, Project Engineering or Engineering Technology preferred 3-5 years laser welding experience. Experience with laser processing and/or robotics is desirable Robotic programming experience is desirable Excellent written and verbal communication skills. Ability to read and interpret weld symbols Skill in the use of computers, specifically a PC, Windows-based operating environment Ability to work independently and as part of a team. Willingness to work in a lab environment and perform welds without assistance Ability to handle a constantly changing set of priorities. Willingness to travel 20% of the time. Possesses and applies a broad knowledge of principles, practices and procedures of particular field of specialization to the completion of difficult assignments. Physical Demands and Work Environment: The physical demands and work environment characteristics described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, the employee is typically required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; balance; stoop; bend; squat; climb; talk and hear. Be able to climb ladders; lift hand tools approx. 1-15 lbs. in weight to complete machine assembly, parts up to 50 lbs. Repetition with activity. Work environment: The noise level in the work environment is usually low to moderate. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Coldwater Req ID: 28002 Job Responsibilities Position Summary: We are seeking applicants for a Trainee position which is an entry level Skilled Trades employee to perform general machine shop cleanup duties. This position is an opportunity to gain experience in a machine shop setting for an individual who would potentially grow into a member of LEA Coldwater's Apprenticeship Program. Role qualifications: • Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. • Be aware of the relevance and importance of their activities and how they contribute to the achievement of quality objectives. Position responsibilities: • Ensure cleanliness and organization of the manufacturing shop • Assist with set up and tear down of any company wide meeting • Perform other duties as assigned • Work well with helpers, Engineers, Management, and support functions Job Requirements Essential skills and experience: • Pending or earned High School Diploma • Vocational training in Machine Trades or equivalent preferred • Demonstrated aptitude for mechanical trades and applied mathematics • Demonstrated eagerness to work and learn metalworking • Basic mechanical knowledge of machines and tools • Commitment to company values. • Educational training and experience requirements may be modified at the Managements Team's discretion. Behavioral Traits: • Highly self-motivated and driven • Dependable • Organized • Active listener • Forward thinking attitude and the continual need to refine and polish work, by seeking to exceed customer and Company's expectations Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Plymouth - 46247 Employment Status: Salary Full-Time Function: Engineering Req ID: 27246 Summary Lincoln Electric is seeking a highly skilled Project Manager to support our Red Viking subsidiary based in Plymouth, MI. This role is responsible for leading complex, high-visibility projects that require significant resources, cross-functional collaboration, and seamless integration across teams. The Project Manager will drive initiatives from concept through final implementation, ensuring quality, budget, and schedule adherence while maintaining strong stakeholder alignment. At Lincoln Electric, we offer career growth potential along with a competitive compensation package, including bonus incentives, student loan repayment, tuition reimbursement, paid time off, paid holidays, a comprehensive benefits package (medical, dental, and vision), retirement plans, and much more. Key Responsibilities Lead projects through the full lifecycle: initiation, planning, execution, monitoring, control, and closure. Define project scope, objectives, deliverables, and success criteria while aligning team members to roles and responsibilities. Develop detailed project schedules, allocate resources, and manage risks to ensure timely and cost-effective completion. Coordinate cross-functional efforts with engineering, manufacturing, procurement, testing, quality, distributors, vendors, and end users. Ensure strict compliance with quality standards; review and approve final project deliverables. Provide regular updates to executive leadership and business unit leaders on project progress, risks, and outcomes. Manage and maintain financial tracking tools including Gross Margin, Operating Profit, Backlog, SG&A, and other key financials. Utilize advanced Excel skills to create and troubleshoot formulas, build reports, and support executive-level reporting. Leverage ERP systems for project tracking, reporting, and ensuring data integrity across business functions. Lead and mentor a team of project engineers, staff engineers, and manufacturing professionals to achieve technical and operational goals. Prepare clear documentation, presentations, and reports for both internal and external stakeholders Required Experience & Education Education: Bachelor's degree in Engineering, Technical Discipline, or Business Administration (with strong technical design and execution background). Experience: 7-10+ years of project management experience in a manufacturing environment. Proven background in advanced capital equipment design, build, and installation (scheduling, procurement, manufacturing, testing, and quality). PMP certification strongly preferred. Project Leadership: Demonstrated success managing scope, budgets, schedules, personnel, and materials within complex organizations. Technical Knowledge: ERP systems experience for project management and reporting. Proficiency with Excel (advanced formulas, financial tracking, reporting). Familiarity with ISO 9001, ISO 14001, ISO 17025, or equivalent standards. Soft Skills: Strong leadership, influence, and negotiation abilities. Excellent written, verbal, and presentation communication skills. High attention to detail and documentation accuracy. Other Requirements: Supervisory experience managing technical professionals. This person will work very closely with a team of project engineers, staff engineers, and manufacturing professionals on a daily basis. Willingness to travel up to 20%. U.S. Citizen or Permanent Resident (ITAR compliance required). Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Req ID: 26527 Summary Fori Automation, LLC, a Lincoln Electric Company, is a global supplier of welding, assembly, material handling, and testing equipment for automotive and non-automotive customers worldwide. Fori Automation focuses on delivering cost-effective, highly engineered products and systems designed and manufactured globally with localized sales, project management, and service. We are seeking an experienced Controls Software Engineer for our Shelby Township, MI site with a background in industrial software development. The Controls Software Engineer will initially support active projects and then transition to completing projects directly. They will take the lead on developing software on new projects and debug software on new machines. This role requires travel to customer sites for equipment installation and customer interaction. What You Will Do Design PLC software and HMIs for industrial automation equipment Debug and troubleshoot PLC software and HMIs Collaborate with cross-functional teams to maintain project timelines and critical path milestones. Maintain task lists and reports of open items. Maintain project design documentation and prepare customer deliverables. Ensure the controls engineering process is tracked and followed. Assist customers and local tradespeople in troubleshooting equipment issues. Conduct end-user training on equipment operation. Education & Experience Requirements Electrical Engineering or Computer Engineering degree preferred; Mechatronics degrees will also be considered. Minimum of two years of experience as a Controls Engineer or Controls Software Engineer with experience in designing Rockwell Logix 5000 or Siemens S7-1500 family processors. Knowledge or education in electrical circuits, schematic reading, design, and troubleshooting. Experience with electrical CAD systems, such as AutoCAD Electrical and/or ePLAN Experience with PLC programming in ladder and structured text. Experience programming HMIs Travel required: approximately 30% domestic and international. Weekend work may be required based on project schedules. Preferred Experience in computer programming languages, such as VB, C/C++, or C#. Experience with Rockwell and Siemens HMI preferred. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Coldwater Req ID: 27956 Position Summary Identify the manufacturing process, recommend the machinery concept, accurately develop the cost model, create quotations and provide other supporting information as needed to sell Lincoln Electric Automation-designed equipment. Role Qualifications Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. Play an active role reviewing and developing customer process requirements as it pertains to the application of our products. Play an active role in communicating issues that could impact customer satisfaction. Position Responsibilities Evaluate the feasibility of automation systems based on data supplied by Sales, Engineering, Management and Customers Develop manufacturing processes and concepts capable of producing systems or products Research and develop accurate cost estimates for Lincoln Electric Automation equipment. Write technical quotations and produce supporting documentation as needed. Assist as necessary with customer communication, presentations, and trade related events. Follow-up as necessary with sales, customers, and representatives. Responsible for following Department ISO procedures Essential Skills and Experience Minimum High School Diploma, Associate degree in technical discipline desired or equivalent years of experience. CAD (3D modeling a plus) Preferred 8-10 years of experience in manufacturing and design (mechanical/electrical) of industrial automated equipment. Metal forming (bending, forming, piercing, etc.) and metal joining (Laser, arc, resistance welding, etc.) experience preferred. Preferred 1-2 years of experience working with customers and suppliers. Proficient in Word, Excel and PowerPoint Effective writing and communication skills. Commitment to company values Educational, training, and experience requirements may be modified at the Managements Team's discretion Nonessential Skills and Experience Computer proficiency, including spreadsheet, word processing, and project management software. FMEA, Equipment Capability, Safety (OSHA Stds.) Environmental, Health & Safety (EH&S) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA & EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe and environmentally friendly manner and observe all company EHS procedures. Know that the company EHS procedures are located on the ISO drive. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures. Attend required EHS training Reporting to this position: No direct reports Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work environment: The noise level in the work environment is usually moderate. ISO-14001 Complies with ISO 14001, and other relevant standards. Support, implement and understand the intent of the EMS policy. Participates with ISO-14001 as required. AS 9100 w/ ISO 9001 Complies with AS9100D and ISO 9001:2015 quality management system, procedures, and work instructions General sign-off: The employee is expected to adhere to all company policies. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27932 Responsibilities The operator is responsible for safety, workmanship, product quality and productivity in the performance of the job. Studies blueprints, sketches, drawings, manuals, specifications, or sample part to determine dimensions and tolerances of finished workpiece, sequence of operations, and setup requirements. Measures, marks, and scribes dimensions and reference points on material or work-piece as guides for subsequent machining as necessary. Selects, aligns, and secures holding fixtures, cutting tools, attachments, accessories, and materials on machines as necessary to machine parts as required. Calculates and sets controls to regulate machining factors such as speed, feed, coolant flow, and depth and angle of cut, or enters commands to retrieve, input, or edit computerized machine control media according to established guidelines and procedures. Starts and observes machine operation to detect malfunctions or out-of-tolerance machining, and adjusts machine controls or control media as required. Verifies conformance of finished work-piece to specifications, using measuring and inspection tools as necessary. Sets up and operates machine on trial run to verify accuracy of machine settings or programmed control data. Performs routine maintenance tasks on machines as required. Confers with engineers, production personnel, programmers, or others to resolve machining or assembly problems. Maintain a clean and organized work area and maintain all equipment, to like new appearance, according to maintenance plans and established procedures. Maintain a positive work atmosphere by acting and communicating in a manner so that you get along with customers, clients, co-workers and management. Continue to grow in knowledge and maximize use of tools to identify and assist with continuous improvement. Ensure that safe work practices are followed and adhered to. Maintain a positive work atmosphere by acting and communicating in a manner so that you get along with customers, clients, co-workers and management. Continue to grow lean knowledge and use the tools to identify and assist with continuous improvement. Comply with safety regulations and maintain clean and orderly work areas. The operator is responsible for making setup sheets and/or updating setup sheets when a job is complete. The operator must obtain some measuring devices from the crib. Cross-training of employees to provide flexibility will be required. Required lifting of up to 50 lbs. Basic Requirements High School Diploma or GED. Five (5) or more years previous experience as a machinist. Previous welding industry experience is a plus; knowledge of welding is preferred. 1-2 years mechanical assembly experience is a plus. Basic reading skills. Must be able to follow directions Basic computer navigation and utilization skills. Ability to perform work accurately and thoroughly. Ability to use thinking and reasoning to solve a problem and to think in such a way as to produce a new concept or idea. High attention to detail and self-motivation skills. Specific technical or vocational training or certification is preferred. Advanced measurement skills (mics, calipers, indicators, etc.). Advanced knowledge of feeds and speeds. Complex blue print reading skills. Be able to do shop mathematics including trigonometry. Understand basic GD&T call-outs. Quality Knowledgeable of all quality procedures used to process items in work center. Ability and knowledge to meet all written specifications and prints, and ensure compliance with all standards. Comply with factory spec for production part and first piece checks. Skills, Aptitude and Abilities Extensive machining skills. Excellent mechanical aptitude. Must have CNC programming knowledge. Must have excellent math skills. Must be able to read and understand specifications and prints. Must be able to read a scale, caliper, O.D. and I.D. micrometers, depth micrometer, bore gauges, go-no-go gauges, thread gauges, pin gauges, plug gauges, depth gauges, and dial indicators. Must be able to use general math, record and post earnings on a daily basis. Average hand dexterity is required. Maximum weight lifted - infrequent basis 50 lbs. Maximum weight lifted - repetitive basis 10 lbs. Environmental, Health & Safety (EHS) Understand the company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS and JHA procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS procedures are contained in reference books such as SSW Specifications, Plant Rules and Regulations and Material Safety Data Sheets which are located in the Foreman's area. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS and JHA procedures. Training The Supervisor/Manager shall determine when an individual has completed the training and is qualified to assume these responsibilities. The Supervisor/Manager shall ensure that the employee receives “on the job training”, and the following training at the appropriate times. See Lincoln specification RE150 for training requirements. Personal Protective Equipment: Safety glasses with side shields per EHS562 Safety toe work shoes per EHS563 Hearing protection Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.