Computer Numerical Controller Machinist jobs at PDS Tech

2nd Shift (2:00 PM - 10:00 AM) Principal Responsibilities: Coordinates/Directs Tooling Specialists. Interact with Crew Supervisor, other team leaders, Engineering, and Manufacturing Specialists to assess requirements, develop plans, and provide needed materials and direction for the purpose of assisting tooling specialists to safely operate equipment and meet or exceed the requirements of manufacturing. REPORTS TO Directly to the Tool Room Supervisor RESPONSIBILITIES ? Responsible for placement of tooling orders and related components, securing tooling quotes when necessary Maintain a monthly physical inventory of tooling, reordering replacement tools as required, to support production Supports the daily operations of the tool room equipment. Monitor on-going tool quality by maintaining contact with manufacturing (i.e. Crew Supervisors, Manufacturing Team Leaders and Utility Specialist. Maintain Tool Life Tracking System ? Provide support to manufacturing operations by facilitating problem solving and continuous improvement Fabricate and repair jigs, fixtures and Marposs verification/end of lot rods to support manufacturing as needed Support and monitor Tool Receiving and inspection records. Perform inspection of product related tooling as needed Support training as needed Assure production readiness of Tool and Die Support daily/monthly operator PMs Skills Required CNC/machining background a plus Blueprint reading a plus Drill Press Sawing Lay out details for manual machining operations Machine details to design prints using standard tool room equipment Experience Required Minimum two (2) years' experience in developing powder metal tooling preferred Minimum two- (2) years' experience in tooling development - working with automotive customers preferred A working knowledge of computers/Knowledgeable in Microsoft Windows, Microsoft Word and/or Excel preferred Education Required HS or GED ISO9001/IATF16949/ISO14001 Awareness Advanced knowledge of manual Tool Room Equipment CNC mill details to finished size after heat treat (face forms) Coaching Others Continuous Improvement Customer Specific Requirements ? Ethical Practice ? General Housekeeping ? Health & Safety Identify and demonstrate usage of machine safety and personal protective equipment Lock-out/Tag-out Procedures Material handling, hazardous materials handling and storage Prepare details for CNC Machine ? Preventive Maintenance/Machine Tools Risk-Based Thinking Use hand tools on contoured steel from CNC milling operations

Adecco Staffing is partnering with a reputable manufacturing facility in Peterborough, NH to hire CNC Machine Setup Operators for all shifts! This is a temp-to-hire or direct-hire opportunity, depending on your level of CNC experience. The position offers competitive pay rates and the opportunity to join a growing company. Pay Rate: $17-$29 per hour, depending on experience and shift Schedules Available: 1st Shift Monday through Friday 7:00am-3:30pm, OT available 2nd Shift Monday through Friday 3:15pm-11:45pm, OT available 3rd Shift Sunday through Thursday 11:30pm-7:00am (paid for 8), OT available Job Summary: Operates CNC mills and lathes, and other machines including 4 th and 5 th axis', to produce components to specified dimensions and characteristics according to quality standards. Essential Duties and Responsibilities: Operate 2 required CNC machines to produce a diversified range of parts on short or long run work, and exacting finish specifications. Follow established procedures, verbal instructions, and information obtained from set-up cards and layout sheets (certified process or engineered cycles) to ensure parts are manufactured as ordered. Inprocess readings to ensure adherence to tolerance. Set up machinery or equipment to perform job tasks, including adding or removing parts, to create the correct tool to manufacture the parts in accordance with the Shop Order. Use micrometers, verniers, optical comparator, microscope, and a variety of fixed and adjustable gauges to set-up equipment and check work. Diagnose and correct operating difficulties, maintain required records, detect and report unusual conditions to assigned leader. Keep work area clean and orderly, observing all safety rules and regulations, and conforming to OSHA regulations. Move materials, parts, and containers, as required, to complete job duties. Why Apply? Competitive pay rates with the potential for overtime. Temp-to-hire or direct-hire opportunity based on your level of CNC experience. Work in a high-level manufacturing facility with advanced equipment and processes. Training and growth opportunities available. If you are interested in this exciting opportunity and feel you have the skills to succeed, please apply today with an updated resume or call 603-###-####! We look forward to hearing from you. Pay Details: $17.00 to $29.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Warehouse Operator - $19/hr | Maumee, OH | 2nd & 3rd ShiftsStaffworks Group is hiring Warehouse Operators in the Maumee, OH area for a leading supplier in the metals industry, serving Aerospace, Medical, Defense, and Thermal Processing sectors. Shifts Available: 2nd Shift: 3:00 PM - 11:00 PM 3rd Shift: 11:00 PM - 7:00 AM Starting Pay: $19.00/hour Responsibilities: Handle and process metal materials accurately Operate forklifts and overhead cranes (training provided) Ensure on-time order fulfillment and shipment accuracy Read and follow detailed work instructions Maintain a safe and organized work environment Requirements: Ability to read a tape measure to 1/16” Basic computer skills for inventory and order tracking Ability to use micrometers and calipers Strong teamwork and communication skills Self-motivated with excellent attention to detail Physical Requirements: Ability to stand, climb, and bend for prolonged periods Lift up to 70 lbs Pass annual vision and hearing exams This is a full-time opportunity offering competitive pay and potential for career growth.Apply today and join the Staffworks team in Maumee, OH! #TalrooToledo

Employment Solutions is partnering with a successful company to hire a CNC Operator or Programmer to work in Endicott, NY. This is a direct hire full-time position with outstanding benefits! **2nd shift** Pay rate: $20.00 - $33.00/hour DUTIES: 2nd shift available with shift differential Use DP Esprit CAM software applications to program parts for CNC Machine Tools. Use Microsoft Office software applications to produce setup instruction sheets for Manufacturing Area. Use INFOR software to write fabricating procedures (Planners) for part production. Ability to work with the production team in a manufacturing area. REQUIREMENTS 5 years' experience in a machine shop. 2 years' experience in programming Able to take a profile, do the set up independently Experience with setting up a program and running the machine independently Ability to read Mechanical Blueprints. Experience with DP Esprit a plus Excellent working knowledge of CNC G Codes. If you would like to learn more, please email me: ************************

Multiple Openings - 1 st shift M-F In this role, candidates will be working in a cell with both a CNC mill and lathe available. Candidates will be responsible for setting up and operating machinery to produce precision parts according to SOP's and blueprints. This role involves ensuring high-quality production while adhering to safety and efficiency standards. Responsibilities: Set up CNC mills and lathes, including loading and unloading materials, installing tools, and configuring machine parameters. Verify dimensions and tolerances of machined parts using measuring instruments such as calipers, micrometers, and gauges. Make necessary adjustments to machines and processes to correct defects and maintain high-quality output. Maintain accurate records of production runs, including materials used, machine settings, and any issues encountered. Report any significant deviations or defects to the supervisor and suggest improvements. Contribute to process improvement initiatives to increase efficiency and reduce waste. Continuous improvement highly encouraged Qualifications: HS diploma or equivalent (technical certification or vocational training in CNC machining is preferred) Experience as a CNC Operator/machinist preferably with a focus on mills and lathes. Experience with CNC set-up and software is a plus. Ability to read and work from blueprints/engineering drawings/SOP's Familiarity with measurement tools and quality control techniques Basic computer skills for programming and machine control Willing to train candidate that show initiative Pay and Benefits Competitive benefits with options such as medical, dental, vision, and 401(k) Pay is dependent upon experience CNC, manufacturing, machinist, urgently hiring, CNC programmer, CNC operator Pay Details: $42,000.00 to $65,000.00 per year Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Adecco is hiring Entry Level CNC Machine Operators with our local client. Weekly pay starts at $$17.00-$21.60 per hour. Apply now! · High School Diploma or GED · 1+ years' related experience · Manufacturing experience preferred · Must be able to follow verbal and written instructions · Ability to lift up to 30 lbs. · Operate machines · Use measuring tools · Review products to ensure quality standards met Available Shifts: · 1st Shift: Monday-Friday 6:00am-2:30pm · 2nd Shift: Monday-Friday 2:00pm-10:30pm Pay Details: $17.00 to $21.60 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Adecco is hiring Entry Level CNC Machine Operators with our local client. Weekly pay starts at $$17.00-$21.60 per hour. Apply now! · High School Diploma or GED · 1+ years' related experience · Manufacturing experience preferred · Must be able to follow verbal and written instructions · Ability to lift up to 30 lbs. · Operate machines · Use measuring tools · Review products to ensure quality standards met Available Shifts: · 1st Shift: Monday-Friday 6:00am-2:30pm · 2nd Shift: Monday-Friday 2:00pm-10:30pm Pay Details: $17.00 to $21.60 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Adecco Staffing is working with a manufacturing company in Nashua, NH to bring on CNC Operators on all shifts! These are temp-to-hire opportunities!Position: CNC Operator Pay: • 1st Shift: $18.00 - $20.00/hour • 2nd Shift: $20.00 - $23.00/hour • 3rd Shift: $22.00 - $25.00/hour Shift Schedule: • 1st Shift: 6:00 AM - 2:00 PM • 2nd Shift: 2:00 PM - 10:00 PM • 3rd Shift: 11:00 PM - 7:00 AM Job Overview: We're looking for a dependable CNC Operator to join a leading manufacturing team. In this role, you'll be responsible for operating CNC machines to produce high-quality precision parts according to production standards. This is a great opportunity for someone with a solid foundation in CNC machining who's ready to take the next step in their career. Key Responsibilities: Operate CNC mills or lathes according to setup instructions and specifications Load and unload raw materials and finished parts Monitor machine operations and inspect parts during production to ensure quality Perform basic in-process inspections using precision measurement tools Identify and communicate any irregularities or equipment issues to supervisors Keep accurate records of completed work and report any deviations from production standards Maintain a clean and safe work area in accordance with OSHA and company safety policies Requirements: 1+ year of experience operating CNC machines in a manufacturing environment Basic understanding of blueprints and technical drawings Familiarity with precision measuring instruments (e.g., calipers, micrometers, gauges) Ability to work independently and follow detailed instructions Comfortable lifting up to 40 lbs and standing for long periods Good mechanical aptitude and strong attention to detail Preferred Experience: Exposure to both CNC milling and turning operations Experience working with various materials including aluminum and stainless steel Familiarity with shop math and basic G-code knowledge Proven ability to meet production and quality goals If you are interested in this position, please apply with an updated resume! Pay Details: $18.00 to $25.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our industrial customers. Since 1908 DXP has been dedicated to the highest quality of customer service through our expertise of the products we distribute and the technical services we perform with a sense of individual pride and company spirit. Throughout your career with DXP, we will encourage and empower you to take an active role in identifying and driving your development, so you feel total confidence in your ability to achieve ongoing success. We aspire to be the best solution for the Industrial customers' needs for MROP products and services through our Innovative Pumping Solutions, Metal Working, Supply Chain Services and Service Centers. Check out our many videos to learn more! ************************************* Summary The Manual Machinist will review samples, drawings or instructions to understand specifications of output, plan the sequence of necessary actions for the completion of a job, take measurements and mark material for cutting or shaping, select appropriate machines (e.g. lathes) and position or load material for a job and perform routine machine maintenance and repair minor damages. Responsibilities of the Manual Machinist include, but are not limited to: Review samples, drawings or instructions to understand specifications of output Plan the sequence of necessary actions for the completion of a job Take measurements and mark material for cutting or shaping Select appropriate machines (e.g. lathes) and position or load material for a job Determine and program size of batches, speed of machine etc. Monitor machine while working to adjust the feed, maintain temperature and identify issues Check output to ensure consistency with specifications and discard defects Keep records of approved and defective units or final products Perform routine machine maintenance and repair minor damages Qualifications of the ManualMachinist include, but are not limited to: Proven experience as machinist Experience in using and/or programming manual, semi-automated or automated tools and machines (lathes, grinders etc.) Ability to use precision tools (e.g. calipers) to take accurate measurements Knowledge of the properties of metal and other material Ability to read blueprints, schematics and manuals Good at math with analytical abilities Physical stamina and strength to lift heavy items Acceptable driving record, according to company guidelines. High school diploma or equivalent; completion of vocational training or an apprenticeship will be an asset #zrjj Additional Information Physical Demand: Must be able to lift up to 50 lbs. unassisted. Pay: $25 - $55 DOE Working Conditions: Shop Environment Training/Certifications: N/A Shift Time/Overtime: Day Shift 6 am to 6 pm Travel: N/A Education: HS Diploma or GED DXP is always looking for individuals who want to join a team of employees who have the desire to achieve remarkable accomplishments together. The culture of the organization is supportive and goal oriented with high expectations, yet it is an environment where the team spirit inspires everyone to do their best. All DXP employees play a vital part in the organization and are treated with respect. By applying to DXP, you will have the opportunity to speak with some of the most respected professionals in the industry. DXP offers a comprehensive benefits package including: Medical, Dental, Vision, Flexible Spending, 401(k), paid holidays, Life and Disability Insurance, and additional supplemental products. Minimum Required Salary and benefits commensurate with experience. We are an equal opportunity employer. Except where prohibited by state law, all offers of employment are conditioned upon successfully passing a drug test. This employer uses E-Verify. EOE/M/F/D/V

Join Our Team! Adecco is hiring CNC Machinists for a leading precision machining company located in Billerica, MA. This is an excellent opportunity to join a fantastic manufacturing facility! Job Title: CNC Machinist Shift: 1st Shift Job Type: Full-Time | Temp-to-Hire Pay: $19 - $27 per hour (based on experience) Key Responsibilities Load and unload CNC machines for daily production runs Inspect finished parts and perform basic troubleshooting when needed Read and interpret blueprints and engineering drawings Use precision measuring tools such as micrometers, calipers, and gauges Maintain quality and safety standards throughout the production process Qualifications High school diploma or GED required 2+ years of CNC machining experience preferred (will train motivated candidates) Familiarity with machining concepts and basic CNC operations Proficient with precision inspection tools (verniers, micrometers, indicators, etc.) Strong attention to detail and commitment to quality Excellent work ethic with the ability to work independently or as part of a team Must be authorized to work in the U.S. on a full-time basis Pay Details: $22.00 to $27.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Adecco Staffing is working with a manufacturing facility in Wilton, NH to bring on aCNC Programmer/Machinist. This is a full-time position. Job Title: CNC Programmer/Machinist Pay: $32-$38 depending on skillset Hours: Monday - Thursday 6:00am - 4:30pm We are seeking a skilled and experienced CNC Programmer to join our manufacturing team. This individual will be responsible for developing, editing, and optimizing CNC programs to produce precision components according to engineering specifications. The ideal candidate will have a strong background in machining, a keen eye for detail, and the ability to work independently in a fast-paced environment. Responsibilities: Create and modify CNC programs for mills, lathes, and multi-axis machines using CAD/CAM software Interpret technical drawings, blueprints, and GD&T to ensure accuracy in programming Select appropriate tools, feeds, and speeds to optimize machining performance Work with machinists and engineers to set up and troubleshoot machines during program prove-out Maintain all documentation related to programming, tooling, and setup instructions Continuously evaluate processes for efficiency and quality improvements Ensure all work complies with company safety standards and quality requirements Qualifications: High school diploma or equivalent required; technical training or associate degree preferred Minimum 3 years of CNC programming experience in a manufacturing environment Proficient in CAD/CAM software (e.g., Mastercam, SolidWorks, or similar) Strong knowledge of G-code, tool selection, and machining processes Ability to read and interpret complex technical drawings Experience with machine setup and operation is a plus Strong analytical and problem-solving skills Excellent attention to detail and organizational skills Physical Requirements: Must be able to stand for extended periods Ability to lift up to 50 lbs occasionally Manual dexterity and good vision for precision work If you are interested in this position, please apply with an updated resume! Pay Details: $32.00 to $38.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Bring more to life. Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology? At Pall Corporation, one of Danaher's 15+ operating companies, our work saves lives-and we're all united by a shared commitment to innovate for tangible impact. You'll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher's system of continuous improvement, you help turn ideas into impact - innovating at the speed of life. As a global leader in high-tech filtration, separation, and purification, Pall Corporation thrives on helping our customers solve their toughest challenges. Our products serve diverse, global customer needs across a wide range of applications to advance health, safety and environmentally responsible technologies. From airplane engines to hydraulic systems, scotch to smartphones, OLED screens to paper-everyday Pall is there, helping protect critical operating assets, improve product quality, minimize emissions and waste, and safeguard health. For the exponentially curious, Pall is a place where you can thrive and amplify your impact on the world. Find what drives you on a team with a more than 75-year history of discovery, determination, and innovation. Learn about the Danaher Business System which makes everything possible. The second shift CNC Grinder II (Manual) is responsible for performing various types of manual grinding on products and partners with the Production Supervisor to ensure the machine shop meets daily production and quality goals. This position is part of the Pall Aerospace Machine Shop and will be located onsite in New Port Richey, FL. The work schedule is Monday thru Friday, 2:45 PM to 11:15 PM and overtime is routine. This position requires access to export-controlled commodities, technical data, technology, software, and services. U.S. citizenship, U.S. legal permanent resident status, protected person status, or U.S. Government export authorization is required. Any offer of employment is contingent upon Pall obtaining the necessary employment visa and export authorization, including, if required, an export license from the applicable U.S. government agency. In this role, you will have the opportunity to: Select proper holding devices for work, i.e., chucks, collets, faceplates, vices, sine plates, etc. to perform ID (inner diameter), OD (outer diameter) and surface grinding to deburr parts during machining operations and on manual equipment based on blueprints and/or set-up sheets. Inspect and check work using precision measuring equipment, optical flats, micrometers, indicators, etc. and complete all necessary paperwork as required including scorecards, hazard recognitions, routers, and data. Perform preventive maintenance on grinding equipment. The essential requirements of the job include: High School diploma or equivalent (i.e. GED) and minimum of three (3) years of related experience. Good knowledge of shop math and familiar with use of precision measuring equipment (i.e., optical flats, micrometers, indicators, etc.). Experience with Studer S21 and/or Studer 131 is a plus Work overtime as required. Frequent bending, lifting and standing for extended periods of time; frequent lifting up to 20 lbs. from floor to bench; occasional lifting to 35 lbs. Good eye and hand dexterity. Travel, Motor Vehicle Record & Physical/Environment Requirements: Frequent bending, lifting and standing for extended periods of time. Frequent lifting up to 20 lbs. from floor to bench. Occasional lifting to 35 lbs. Good eye and hand dexterity. It would be a plus if you also possess previous experience in: DBS (Danaher Business System). Quality measures, AQL levels and inspection methods. Computers, CNC equipment, CNC controls, and tool offsets. Pall, a Danaher company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it's a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at . This job is also eligible for bonus/incentive pay. We offer comprehensive package of benefits including paid time off, medical/dental/vision insurance and 401(k) to eligible employees. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. Join our winning team today. Together, we'll accelerate the real-life impact of tomorrow's science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life. For more information, visit . Danaher Corporation and all Danaher Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law. The U.S. EEO posters are available here . We comply with federal and state disability laws and make reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact:1- or .

Bring more to life. Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology? At Pall Corporation, one of Danaher's 15+ operating companies, our work saves lives-and we're all united by a shared commitment to innovate for tangible impact. You'll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher's system of continuous improvement, you help turn ideas into impact - innovating at the speed of life. As a global leader in high-tech filtration, separation, and purification, Pall Corporation thrives on helping our customers solve their toughest challenges. Our products serve diverse, global customer needs across a wide range of applications to advance health, safety and environmentally responsible technologies. From airplane engines to hydraulic systems, scotch to smartphones, OLED screens to paper-everyday Pall is there, helping protect critical operating assets, improve product quality, minimize emissions and waste, and safeguard health. For the exponentially curious, Pall is a place where you can thrive and amplify your impact on the world. Find what drives you on a team with a more than 75-year history of discovery, determination, and innovation. Learn about the Danaher Business System which makes everything possible. The second shift CNC Machinist II is responsible for performing various types of manual grinding on products and partners with the Production Supervisor to ensure the machine shop meets daily production and quality goals. This position is part of the Pall Aerospace Machine Shop and will be located onsite in New Port Richey, FL. The work schedule is 2nd shift Monday through Friday, 2:45 PM to 11:15 PM, and overtime is frequent. This position requires access to export-controlled commodities, technical data, technology, software, and services. U.S. citizenship, U.S. legal permanent resident status, protected person status, or U.S. Government export authorization is required. Any offer of employment is contingent upon Pall obtaining the necessary employment visa and export authorization, including, if required, an export license from the applicable U.S. government agency. In this role, you will have the opportunity to: Set up and operate CNC Mills and/or Lathes including the selection of tools, holding fixtures, and methods for producing machined parts, and changing worn tooling. Read and interpret CNC programs to recognize and make changes to rectify excessive tool wear and minor program oversights and change off-sets as necessary to maintain quality and deburr parts during the machine cycle. Perform first-piece and in-process inspection using precision measuring tools (gauges and automated CMMs) and blueprints. Read and understand all types of drawings required for machine parts such as castings, forgings, and detailed engineering sketches. Complete all necessary paperwork as required including scorecards, hazard recognitions, routers and data, Red Tags, etc. Maintain an acceptable production rate based on pre-established standards and produce products that meet all quality and drawing requirements. Perform secondary operations (i.e., set-up and operation on simple machines or processes including drill press, stamping press, deburring, etc.). Identify new ways to machine parts to improve quality and productivity. Assist in training co-workers. The essential requirements of the job include: High School diploma or GED and at least 3 years of CNC set-up experience or completion of a trade school apprenticeship program and 2 years of CNC set-up experience. Fluent in blueprint reading or complete blueprint training onsite. Ability to work overtime as required. Travel, Motor Vehicle Record & Physical/Environment Requirements: Frequent bending, lifting, and standing for extended periods; frequent lifting up to 20 lbs. from floor to bench; occasional lifting to 35 lbs. Good eye and hand dexterity. It would be a plus if you also possess previous experience in: Knowledge of at least 3-axis machining and above CNC Machining in aerospace manufacturing Quality measures, AQL levels and inspection methods. Pall, a Danaher company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it's a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at . This job is also eligible for bonus/incentive pay. We offer comprehensive package of benefits including paid time off, medical/dental/vision insurance and 401(k) to eligible employees. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. Join our winning team today. Together, we'll accelerate the real-life impact of tomorrow's science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life. For more information, visit . Danaher Corporation and all Danaher Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law. The U.S. EEO posters are available here . We comply with federal and state disability laws and make reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact:1- or .

Job Title: CNC Programmer Pay Range: $28-$36/hour (based on experience) Job Type: Full-Time About the Opportunity: Adecco is partnering with a leading manufacturing company in Nashua, NH, to recruit an experienced CNC Programmer. This full-time role focuses on both prototype and production machining in a dynamic and team-oriented environment. We are seeking a hands-on professional with strong Mastercam skills and a solid background in CNC programming and machine setup. Key Responsibilities: Develop, modify, and optimize CNC programs for milling machines, ensuring quality, efficiency, and cost-effectiveness Create and update setup documentation and maintain accurate programming records Collaborate with engineers, estimators, supervisors, and machinists to provide technical support and resolve issues Generate CAM files based on CAD drawings, technical prints, or verbal instructions Set up and operate CNC milling machines to test and validate programs as needed Review customer specifications and work with internal or client teams to address discrepancies Support continuous improvement efforts and assist with additional tasks as assigned Qualifications: High School Diploma or equivalent Minimum 5 years of experience in CNC programming At least 2 years of multi-axis CNC programming experience 10+ years of experience in CNC setup or lathe machining Strong proficiency with Mastercam software Working knowledge of Microsoft Outlook, Word, and Excel Ability to read and interpret technical blueprints and use measurement tools effectively High attention to detail and a strong commitment to quality Self-motivated, with excellent time management and problem-solving skills Strong interpersonal and communication abilities; works well in a team-oriented environment If you are interested in this position or others available, please either apply with an updated resume! Pay Details: $18.00 to $23.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Adecco staffing is recruiting for an exceptional CNC Programmer in Lynnfield! This is a DIRECT HIRE opportunity. Shift: Monday-Friday, 8:00AM-5:00PM Pay: $40-$48/hour DOE This position is ideal for someone who combines advanced programming knowledge with hands-on machining expertise and enjoys taking complex concepts from design through finished production. Key Responsibilities: Interpret engineering drawings and specifications to determine machining steps, materials, tooling, and production sequence. Create and edit CNC programs from CAD data to support daily production needs. Operate, set up, and troubleshoot milling and wire EDM machines to ensure accuracy and efficiency. Translate R&D and prototype designs into fully machined, production-ready components with minimal supervision. Partner with engineering to refine designs for manufacturability and recommend process improvements. Monitor production quality, verify tolerances using calibrated measuring tools, and ensure compliance with specifications. Stay current with machining technologies and learn new software or equipment as needed. Collaborate closely with tooling, inspection, and assembly teams to meet production goals. Assist with machine maintenance, repairs, and overall shop organization. Support operators with setups, adjustments, and technical problem-solving. Maintain consistent safety and housekeeping standards in all work areas. Qualifications Proven experience in CNC programming, setup, and troubleshooting. Ability to manage the complete design-to-production process, including prototype and small-run development. Mastercam proficiency or ability to learn new programming tools quickly. Strong understanding of machining principles, shop math, and material properties. Tool and Die or precision manufacturing background preferred. High mechanical aptitude and attention to detail. If you are interested & qualified, please apply with your updated resume! Pay Details: $40.00 to $48.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

CNC Machinist - Location: Haverhill, MA Employment Type: Full-Time Shift: 1st Shift: 7am-3:30pm with OT Join us and be part of a team dedicated to delivering precision and excellence. As a CNC Horizontal Machinist, you will set up and operate CNC horizontal machining centers according to engineering drawings, blueprints, and work instructions. Key Responsibilities · Select, install, and align tooling, fixtures, and workpieces. · Adjust machine settings and offsets to optimize machining processes and maintain part quality. · Perform first article, in-process, and final inspections using precision measuring instruments (calipers, micrometers, height gauges, etc.). · Interpret complex drawings and GD&T specifications. · Troubleshoot machining issues and implement corrective actions as needed. · Accurately complete production and quality documentation. · Maintain a safe, organized, and efficient work environment, adhering to all safety protocols. · Other duties as assigned What You Bring (Core Competencies) · Strong technical knowledge of horizontal machining operations and best practices. · Proficiency in reading and interpreting technical drawings and GD&T. · Skilled in using precision measurement tools for verifying dimensions. · Ability to independently diagnose and solve machining problems. · High attention to detail and commitment to quality craftsmanship. · Effective communication skills and a collaborative team approach. · Flexibility to adapt in a fast-paced, high-mix, low-volume manufacturing environment Minimum Qualifications · High school diploma or equivalent (GED). · 2+ years of experience operating CNC horizontal machining centers. · Ability to set up, operate, and make minor program edits. · Familiarity with machining plastics and aluminum materials. · Basic computer literacy for documentation and data entry. Preferred Qualifications · Completion of a CNC machining certificate program or formal apprenticeship. · 5+ years of CNC horizontal machining experience, preferably in a custom manufacturing environment. · Experience with large, complex part machining. · Knowledge of ISO 9001 quality standards and processes. · Familiarity with advanced machining strategies and tooling optimization. Work Environmental & Physical Requirements · Ability to stand, walk, and perform repetitive tasks for extended periods (8+ hours). · Regularly lift and maneuver parts/materials up to 25 pounds. · Fine motor skills and manual dexterity to handle small components and tools. · The ability to wear required Personal Protective Equipment (PPE), including safety glasses, shoes, gloves, and hearing protection. · Work in a manufacturing environment exposed to moderate noise, temperature changes, and machining oils. IF interested please apply directly to this post! Pay Details: $30.00 to $35.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Adecco is hiring Entry Level CNC Machine Operators with our local client. Weekly pay starts at $$17.00-$21.60 per hour. Apply now! · High School Diploma or GED · 1+ years' related experience · Manufacturing experience preferred · Must be able to follow verbal and written instructions · Ability to lift up to 30 lbs. · Operate machines · Use measuring tools · Review products to ensure quality standards met Available Shifts: · 1st Shift: Monday-Friday 6:00am-2:30pm · 2nd Shift: Monday-Friday 2:00pm-10:30pm Pay Details: $17.00 to $21.60 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Adecco Staffing is partnering with a high-level manufacturing facility in Keene, NH, to hire Machine Operators on all shifts. These are temp-to-hire roles with strong potential for long-term growth in a clean, precision-focused manufacturing environment. If you have mechanical aptitude, attention to detail, and are looking to build a career in advanced manufacturing, this is an excellent opportunity to join a company that produces premium aerospace components and values craftsmanship. Job Title: Machine Operator Location: Keene, NH Pay Rate: • 1st Shift: $21.00 - $24.00/hour (based on experience) • 2nd Shift: $24.00 - $26.00/hour (based on experience) • 3rd Shift: $24.00 - $27.00/hour (based on experience) Schedule: • 1st Shift: Monday - Thursday, 5:00 AM - 3:00 PM (OT available) • 2nd Shift: Monday - Thursday, 3:00 PM - 2:00 AM (OT available) • 3rd Shift: Sunday - Wednesday, 9:00 PM - 7:00 AM (OT available) Job Type: Temp-to-Hire What You'll Do: Operate and cycle machines, making adjustments as needed to maintain quality Perform internal and external precision setups Work from engineering drawings, setup charts, and process sequence sheets Select and install proper tooling, including dressing/truing grinding wheels Perform quality inspections and use gaging tools to verify components Maintain and complete accurate process documentation What We're Looking For: High School Diploma or equivalent (technical certifications preferred) Above-average mechanical aptitude and strong shop math skills Ability to follow detailed work instructions with precision High attention to detail, especially in aerospace-quality manufacturing environments Pay Details: $21.00 to $24.00 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Bring more to life. Are you ready to accelerate your potential and make a real difference within life sciences, diagnostics and biotechnology? At Pall Corporation, one of Danaher's 15+ operating companies, our work saves lives-and we're all united by a shared commitment to innovate for tangible impact. You'll thrive in a culture of belonging where you and your unique viewpoint matter. And by harnessing Danaher's system of continuous improvement, you help turn ideas into impact - innovating at the speed of life. As a global leader in high-tech filtration, separation, and purification, Pall Corporation thrives on helping our customers solve their toughest challenges. Our products serve diverse, global customer needs across a wide range of applications to advance health, safety and environmentally responsible technologies. From airplane engines to hydraulic systems, scotch to smartphones, OLED screens to paper-everyday Pall is there, helping protect critical operating assets, improve product quality, minimize emissions and waste, and safeguard health. For the exponentially curious, Pall is a place where you can thrive and amplify your impact on the world. Find what drives you on a team with a more than 75-year history of discovery, determination, and innovation. Learn about the Danaher Business System which makes everything possible. The second shift Manual Machinist II is responsible for performing senior level, complex manual machining on aerospace parts. This position is part of the Pall Aerospace Machine Shop and will be located onsite in New Port Richey, FL. The work schedule is Monday thru Friday, 2:15 PM to 11:15 PM, and overtime is routine. This position requires access to export-controlled commodities, technical data, technology, software, and services. U.S. citizenship, U.S. legal permanent resident status, protected person status, or U.S. Government export authorization is required. Any offer of employment is contingent upon Pall obtaining the necessary employment visa and export authorization, including, if required, an export license from the applicable U.S. government agency. In this role, you will have the opportunity to: Work with complex castings and forgings, and machine parts from bar stock. Deburr parts during machining operations. Read and understand all types of drawings and detailed engineering sketches to work with castings and forgings as well as machine parts from bar stock. This includes selecting proper holding devices, chucks, collets, faceplates, vices, sine plates, etc. Builds tools and fixtures. Indicate machine axis, fixtures, tooling, and components as required to meet given tolerances. Set-up and operate manual lathes and mills. Work to close tolerances and inspect all work with various types of inspection equipment (hand gauges, micrometers, calipers, height gauge, functional gauges, optical comparator aka shadow graph) to ensure acceptable quality and productivity. Indicate machine axis, fixtures, tooling, and components as required to meet given tolerances. Troubleshoot and diagnose machine process issues Complete all necessary paperwork as required including scorecards, hazard recognitions, routers and data. The essential requirements of the job include: High School diploma or equivalent (i.e. GED) and three (3) years of experience working on manual machining equipment. Good working knowledge of shop math. Experience reading machine drawings, blueprints, and work instructions. Possesses functional knowledge of general dimensioning and tolerancing. Understand, follow and effectively communicate verbal and written instructions. FAA certification may be required. Work overtime as required. Physical/Environment Requirements: Frequent lifting up to 35 pounds. Lift up to 50 pounds with assistance. Lifting frequency: Daily. Required to stand for long time periods (for a minimum of 8 hours or more). Frequently twist and bend. Pass visual acuity exam. Work with solvents, oils, and other chemicals. It would be a plus if you also possess previous experience in: Aerospace manual machining. Pall, a Danaher company, offers a broad array of comprehensive, competitive benefit programs that add value to our lives. Whether it's a health care program or paid time off, our programs contribute to life beyond the job. Check out our benefits at . This job is also eligible for bonus/incentive pay. We offer comprehensive package of benefits including paid time off, medical/dental/vision insurance and 401(k) to eligible employees. Note: No amount of pay is considered to be wages or compensation until such amount is earned, vested, and determinable. The amount and availability of any bonus, commission, benefits, or any other form of compensation and benefits that are allocable to a particular employee remains in the Company's sole discretion unless and until paid and may be modified at the Company's sole discretion, consistent with the law. Join our winning team today. Together, we'll accelerate the real-life impact of tomorrow's science and technology. We partner with customers across the globe to help them solve their most complex challenges, architecting solutions that bring the power of science to life. For more information, visit . Danaher Corporation and all Danaher Companies are committed to equal opportunity regardless of race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or other characteristics protected by law. The U.S. EEO posters are available here . We comply with federal and state disability laws and make reasonable accommodations for applicants and employees with disabilities. If reasonable accommodation is needed to participate in the job application or interview process, to perform essential job functions, and/or to receive other benefits and privileges of employment, please contact:1- or .