Repair technician jobs in Odessa, TX

Company Profile BlueFin, a GATE Energy Company, is a leading independent service company with a suite of project execution niches and specialty equipment, covering a full range of pipeline and process, mechanical, intelligent completions, and fluid flushing and filtration services. Our clients range from Operators to General Contractors in the upstream and midstream market sectors of the oil and gas industry. This position is based in Odessa, Texas. Job Summary Serve as Lead Service Technician working in the Completion Services Department for land and offshore. Responsible for execution of tasks as assigned by the Lead Service Technician, Service Supervisor, Project Manager, or other Management. Is operationally qualified, verified, and authorized as required for specific tasks. May lead limited scope projects in the absence of a Lead Service Technician or Superior during a shift with prior approval from and/or under the direction of the Lead Service Technician or Superior. Specific job tasks would include but not be limited to Installation and/or retrieval of Permanent Gauge Systems, Control Line, TEC & Flatpack, Fiber Optics, Chemical Injection Systems, Gas Lift Mandrels & Valves. The Lead Service Technician will conduct all activities in an accountable, respectful, and professional manner at all times and fully support the completion of work in accordance with BlueFin quality and safety standards. Essential Duties and Responsibilities Travel through United States and Gulf of Mexico; staying overnight for extended periods. Proven ability to lead and supervise a field work crew in the task at hand. Communicate effectively with co-workers both office and field related. Good written and verbal communication skills. Ability to train and develop Service Technicians. Direct and perform field services as directed and in accordance with work plan, procedures and/or SOP, and ability to distinguish the work at hand from the work plan/procedure and how to proceed while making field decisions to drive the project. Knowledge and proven ability to operate equipment utilized in Completion Services and to train employees on such equipment. Service, maintain, repair, and test equipment/ tools for pre/post jobs or as instructed in shop. Write or participate in writing JSA's for job task assigned. Load/ unload equipment when required. Learn all field services work and equipment in order to gain skills/knowledge. Increase knowledge and participate in training on other product lines and services. Participation and Compliance with BlueFin HSE and Quality Management System. Comply with all company policies (Safety, quality, general, SOP's, etc). Available 24-hour call (except for scheduled vacation). Have reliable means of transportation to and from BlueFin office. Experience and Education High School Diploma or GED. Preferred 5-10 years of Completions experience. Must hold or ability to obtain Certificates for Marine Trash & Debris, Huet, Water survival, Safe Land/Safe Gulf, Fall Protection, Incipient Fire and Rigging at a minimum. Physical Requirements Must pass required Fit for Duty Exam Ability to drive for extended periods of time. Able to perform demanding physical labor in harsh environments on land and offshore. Bluefin is an Equal Opportunity Employer.

Kemco Facilities Services Benefits: Competitive salary Salary range $23.00 to $40.00 per hour Company Vehicle and Cell Phone Provided Health, dental, and vision insurance Retirement plan with company match Paid time off and holidays Ongoing training and professional development opportunities About Us: Kemco has taken pride in our family values and exceptional service in the Restaurant and Retail sectors that started back in 1989 out of Montgomery, Alabama. We offer coverage from New Orleans to Southern Virginia; we are looking for dedicated professionals to join our team! Our family owned and operated business provides exceptional quality in commercial/industrial HVAC, refrigeration, kitchen equipment repairs, installation, and maintenance. Job Overview: We are seeking a skilled and motivated Field Service Technician to join our team. The ideal candidate will have extensive experience in repairing and maintaining commercial kitchen equipment, excellent troubleshooting skills, and a strong commitment to providing exceptional customer service. This role involves diagnosing, repairing, and servicing a variety of commercial kitchen appliances and systems to ensure optimal functionality and compliance with industry standards. Must have experience commercial kitchen equipment including flat top grills (gas and electric), broilers, fryers (gas and electric) warming units, steam kettles, stoves (gas and electric) and ovens. Key Responsibilities: Equipment Repair and Maintenance: Diagnose, repair, and maintain a wide range of commercial kitchen equipment, including ovens, refrigerators, dishwashers, fryers, and mixers. Troubleshooting: Identify and troubleshoot mechanical, electrical, and gas-related issues in kitchen appliances and systems. Preventive Maintenance: Perform routine preventive maintenance to ensure equipment is operating efficiently and to prevent unexpected breakdowns. Customer Service: Provide excellent customer service by effectively communicating with clients, explaining repair procedures, and offering solutions to minimize downtime. Safety Compliance: Ensure all repairs and maintenance are performed in accordance with safety regulations and industry standards. Documentation: Maintain detailed records of all repairs, services, and parts used. Prepare and submit service reports and invoices promptly. Inventory Management: Keep track of tools, equipment, and spare parts inventory. Order and replenish supplies as needed. Training and Development: Stay updated on the latest industry trends, technologies, and best practices through continuous learning and training. Qualifications: Education: High school diploma or GED required. Technical or vocational training in appliance repair, commercial kitchen equipment, or a related field is preferred. Experience: Minimum of 2-5 years of experience in repairing and maintaining commercial kitchen equipment. Technical Skills: Strong knowledge of mechanical, electrical, and gas systems. Ability to read and interpret technical manuals and schematics. Certifications: Relevant certifications such as EPA 608, CFESA (Commercial Food Equipment Service Association) certification, or equivalent are a plus. Driving License: Valid driver's license with a clean driving record as outlined with our company policy. Background Screening: Must be able to pass a satisfactory background screening. Physical Requirements: Ability to lift heavy equipment, stand, bend, and work in confined spaces for extended periods. Skills: Problem-Solving: Excellent analytical and troubleshooting skills to identify and fix issues efficiently. Communication: Strong verbal and written communication skills to interact effectively with clients and team members. Time Management: Ability to manage time effectively, prioritize tasks, and work independently or as part of a team. Customer Focus: Dedicated to providing high-quality service and ensuring customer satisfaction. Physical Requirements: Ability to lift and carry up to 50 to 75 pounds; frequently lift and or move up to 100 pounds with assistance and heavy lift equipment. Comfortable working in various environments, including confined spaces and heights. Ability to stand, walk, and bend for extended periods and climb up and down ladders. Extensive daily travel to work site locations. Exposure to electrical, steam, and high heat units that require extreme caution and safety equipment. Come join our team and be part of a dynamic company dedicated to providing top-notch service to the Commercial Foodservice Repair industry. We look forward to meeting you! Kemco Facilities Services is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Reinvigorate your career with an organization that values teamwork, expertise, and integrity. We're looking for an experienced Lead Valve Services Technician to join our growing team and take a leadership role in managing valve service operations, customer relationships, and business growth opportunities. This position is ideal for someone with hands-on relief valve experience, strong organizational and communication skills, and a passion for delivering top-quality service in the oil and gas industry. Who we are: At the Crimson Group, we provide our clients with high-value automation, instrumentation, electrical design, and process operation solutions. With the capabilities of a large enterprise, and the agility and responsiveness of a small company, we are a customer-focused provider of automation and integrated solutions. Crimson Group provides total integration of design, project management, panel manufacturing, installation/commissioning, maintenance, and repair for North America and select international markets. What we Offer: Competitive hourly compensation. Comprehensive benefit package and 401k plan. A company laptop and cell phone reimbursement. An environment of continuous learning with the opportunity to enhance your skills & experience and grow within the organization. The opportunity to participate in charitable events through our charity, RedTail Community Foundation. What you will be Doing: Oversee and execute valve testing, inspection, repair, and maintenance activities. Assist with scheduling, resource allocation, and service documentation for multiple client projects. Develop and maintain strong client relationships to ensure satisfaction and repeat business. Lead, mentor, and support valve technicians in the field and shop, ensuring safety and quality standards are upheld. Perform or supervise testing and calibration of relief valves to meet company and safety standards. Assist in troubleshooting and problem-solving of complex valve issues. Track project progress, costs, and customer requirements to ensure timely delivery. Collaborate with operations, sales, and management to identify growth opportunities in valve services. Support business development by identifying client needs and assisting with proposal or quote preparation. Maintain detailed records of work performed, certifications, and compliance documentation. Your Skills and Qualifications: 3-5+ years of hands-on experience with relief valves, safety valves, and related pressure control equipment. Previous experience in a lead technician, coordinator, or supervisory role. Proven customer service and account management skills with the ability to build trust and long-term relationships. Excellent leadership, communication, and organizational skills. Proficiency with scheduling tools, maintenance tracking systems, and Microsoft Office Suite. Ability to manage competing priorities and meet deadlines in a fast-paced service environment. A valid driver's license and willingness to travel occasionally to client sites. Technical training or certification in mechanical, instrumentation, or valve technology. Background in oil & gas, industrial maintenance, or manufacturing. Safety-conscious, reliable, and proactive approach to problem-solving. A results-driven mindset with a focus on quality, customer satisfaction, and continuous improvement. **As part of our commitment to maintaining a safe and professional work environment, the Crimson Group of Companies conducts comprehensive background checks and drug and alcohol testing on all prospective employees as part of the final offer process. These checks are intended to verify the accuracy of information provided by candidates and assess any potential risks to the company or its employees. All offers of employment are contingent upon the successful completion of these background checks.** Please note: We do not accept phone calls regarding job opportunities. To ensure fairness and consistency in our hiring process, all candidates must follow the application instructions outlined in the posting. Thank you for your understanding.

Equipment Repair Technician The Equipment Repair Technician (Ancillary Equipment Technician - AET) is responsible for the preventative maintenance, service, repair and testing of Light Plants, Power Swivels, Tong's, Hydraulic Pumps, Generator's, Etc. CANDIDATES MUST BE LOCAL TO MIDLAND/ODESSA AREA Position Details FLSA Status: Non-Exempt Job Status: Full-time Amount of Travel Required: 30% Reports to: Ancillary Equipment Manager Direct Reports: None Work Schedule: Typically, Monday through Friday, 7:30 AM to 5:00 PM. However, due to the nature of the business, hours may be long and irregular. Weekend and evening hours may be necessary on occasion (on call every other weekend might be expected) Compensation: $23.15-33.08/hour, depending on experience Medical, Dental, Vision and Voluntary Benefits Available 401(k) Plan PTO and Paid Holidays Duties Servicing all Ancillary Equipment that falls into the department. Perform and document all pressure tests for these components after service. Obtain and maintain an inventory of consumable materials and parts for these items. Organize and maintain the facility including the testing station and Tong cage. Assist field personnel with job related problems associated with these components. Perform other duties as assigned. Skills & Abilities Education: High school diploma or GED Experience: 0+ years working with or around ancillary equipment servicing or related job experience; previous experience preferred. Ideal candidates will be mechanically inclined, self-motivating individuals with prior order desk and consumable materials management experience. Other Requirements: Must have a valid driver's license , meet minimum driving standards for company insurance purposes, and successfully pass a pre-employment background check, drug screen and physical. Position Qualifications Accountability & Dependability - Take personal responsibility for the quality and timeliness of work, and achieves results with little oversight. Adaptability & Flexibility - Adapts to changing business needs, conditions and work responsibilities. Detail Oriented - Ability to pay attention to the minute details of a project or task. Ethical - Ability to demonstrate conduct conforming to a set of values and accepted standards. Problem Solving - Ability to find a solution for or to deal proactively with work-related problems. Initiative - Ability to make decisions or take actions to solve a problem or reach a goal. Communication - Ability to communicate effectively, both oral and written, clearly and concisely. Teamwork - Promotes cooperation and commitment within a team to achieve goals and deliverables. Working Under Pressure - Ability to complete assigned tasks under stressful situations. Disclaimer The Company has reviewed this to ensure that essential functions and basic duties have been included. It is intended to provide guidelines for job expectations and the employee's ability to perform the position described. It is not intended to be construed as an exhaustive list of all functions, responsibilities, skills and abilities. Additional functions and requirements may be assigned by supervisors as deemed appropriate. This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate. EOE Statement Deep Well Services is an Equal Opportunity Employer. Deep Well Services does not discriminate on the basis of race, religion, color, sex, gender identity, sexual orientation, age, non-disqualifying physical or mental disability, national origin, veteran status or any other status protected under federal, state, or local law. All employment is decided on the basis of qualifications, merit, and business need.

Job DescriptionSalary: Starts at $15/hr + monthly incentive Love fixing tech and want a job on the go? Join uBreakiFix by Asurion as a Field Technician and get paid to travel locally, solve tech problems, and make customers smileall while growing your skills and career. Why You'll Love It: Starts at $15/hr + monthly incentive Health, dental, vision & life insurance Paid time off Ongoing training & career development Your office is our company vanfreedom & flexibility What Youll Do: Drive a fully equipped repair van to customer locations Diagnose and repair smartphones, tablets & other tech Deliver friendly, in-home service experiences Promote device protection + support plans What Youll Bring: Experience in customer service, tech repair, or retail Comfortable driving and working independently Basic mobile OS/hardware knowledge and soldering Great communication + problem-solving skills Flexible availability (retail hours + weekends) If you're tech-savvy, customer-obsessed, and ready to hit the road, apply now and start building your career, one repair at a time. uBreakiFix by Asurion is proud to be an equal-opportunity employer, committed to providing equal employment opportunities regardless of race, color, ancestry, religion, gender, national origin, sexual orientation, age, citizenship, marital status, disability, or veteran status.

Full-time Description TEAM UP WITH US! The Screw Compressor Repair Technician is responsible for the teardown and rebuild of a variety of valves and packing cases to meet OEM Standards. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: Tear down and inspect various screw compressors. Change gears, bearings, and seals in screw compressors, as necessary. Blind and air test to the shop air pressure values. Tear down and inspect a variety of valves and packing cases. Be able to read dial calipers. Recommend solutions or alternate methods to meet requirements. Basic hand tool knowledge. Able to stand and operate a sand blaster. Basic machining knowledge. Basic shop maintenance and clean up. Other duties may be assigned. WHY WORK WITH US? We like to take care of business and have fun doing it! We offer health, dental, vision, life, and more as a comprehensive benefits package. Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this job, the employee is regularly required to sit, talk or hear. The employee is occasionally required to stand and walk. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually high. Required travel up to 10%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Requirements WHAT YOU'LL NEED: Minimum 3 years mechanical shop/field experience. Observes safety procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively to customers or employees of organization. Knowledge of MS Office and operate a Windows based computer. Pro-active, problem-solving individual who is able to manage a varied workload with constantly changing priorities. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Successfully complete Work Steps assessment.

The Leak Repair Technician is responsible for detecting, locating, evaluating and repairing leaks onsite at client work sites. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values. * Assesses leaking component(s) and reports on findings to supervisory personnel and engineering. * Performs leak repair operations that may include any of the following techniques and tasks: * Drill and tap * Wire and band * Clamp and enclosure installation * Measuring components * Stand-by operations * Inspections of components * Evaluation of performance on repair activities * Identifies circumstances that necessitate the use of proper safety equipment. * Performs appropriate documentation and administrative procedures as required. * Communicates and collaborates with field personnel, client representatives and management. * Maintains awareness of company products and services available to customers. Job Qualifications * High school diploma or equivalent required. Technical school or related education preferred. * Three (3) or more years of experience in an industrial operations or maintenance role preferred. * Ability to perform a variety of tasks, often changing assignments on short notice. * Ability to prioritize and complete work assignments by specific deadlines. * Knowledge of plant maintenance and repair work preferred. * Ability to follow precise directions and procedures of the supervisor on the project. * Must possess a valid driver's license. * Current HAZWOPER training certificate preferred. * Travel requirement 0% - 75% Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere * Interaction with other crew employees, as well as supervisors and client personnel * Working in plant and/or shop areas around production machinery with extreme noise levels * Must be able to wear safety equipment as required by the safety department for personal protection * May be at more than one job site in a day and must be able to tolerate climate changes * May be required to travel out of town on a periodic basis Physical and Mental Requirements * Ability to lift and carry 75 pounds * Must be able to walk and climb except when performing non-field duties * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells * Ability to maintain focus and multitask effectively Excellent communication skills

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, The American Red Cross, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning over 12,000 strong organization as we fuel the world and each other! Summary: The primary responsibility for the Equipment Technician position is collecting, analyzing, and reporting the health of rotating equipment based on multiple technologies including vibration, thermography, oil analysis, pump and motor performance, compressor and engine performance and key operating parameters. This position works closely with operations, engineers, specialists, and maintenance personnel in troubleshooting and repairs. This position will provide support for multiple sites. Essential duties and responsibilities: To perform this job successfully, an individual must be able to perform each essential job duties satisfactorily. The requirements for this position are listed below: * Develop and maintain vibration analysis program. Establish equipment routes and frequency. Collect and enter equipment data necessary for proper vibration analysis. * Proficient with rotating and/or reciprocating equipment analysis techniques and perform as required * Proficient with motor and/or engine analysis techniques and perform as required * Develop and maintain lube oil analysis program establishing routes and frequency * Periodic (monthly, quarterly, etc.) data acquisition from equipment, including vibration data with portable systems, critical machinery performance metrics (flow rates, equipment rotating speed, temperatures, and process flow characteristics) and lube oil samples and analysis * Perform analysis of data to resolve or proactively anticipate equipment failures * Lead and/or assist in root cause failure analysis utilizing the TapRoot process * Implements continuous monitoring systems, such as alarm, report, and acceptance regions * Coordinate scheduling of repairs by taking ownership of notifications and corresponding follow-up * Monitor equipment repairs in the field and at vendor shops * Report equipment deficiencies in SAP system making recommendations for corrective action * Collaborate with responsible Maintenance/Reliability Specialist, engineers, planners, Operations Managers and supervisors to ensure proper priorities are placed on deficiencies and continuous learning/improvement process is fostered * Support the lubrication program by monitoring its effectiveness or, when required, take samples, interpret analysis and take corrective actions Required education: * High School Diploma or GED * Required experience is commensurate with the selected job level: * Level C requires a minimum of 0-2 years of relevant experience in an oil and gas operations role or equivalent work experience * Level B requires a minimum of 2-4 years of relevant experience in an oil and gas operations role or equivalent work experience * Level A requires a minimum of 4+ years of relevant experience in an oil and gas operations role or equivalent work experience Preferred Qualifications: Solid troubleshooting skills and ability to interpret and analyze data Strong computer skills with experience in Microsoft Office suite. Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment * Frequent heavy lifting with and without assistance * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required DISCLAIMER: The above statements, which are subject to change, are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified.

TAS Environmental Services, LP- Emergency Response Services & Environmental Solutions ready to respond wherever, whenever, every time. TAS Environmental Services is headquartered in the Dallas, Texas area and serves companies of all sizes across the South and into the Midwest. For over 100 years, our industrial economy has been built on Oil & Gas, technology, and infrastructure. Today, it is essential for every business and municipality to have a "go-to" vendor for environmental solutions, from industrial cleaning services to emergency response services, to hazardous waste transportation and box rentals. We are prepared 24/7 and every day of the year. At TAS Environmental Services, LP, the Technician will assist in the day-to-day operations to include emergency response, cleaning of equipment, inventory of supplies and assets, and industrial tank cleaning. Potential for dirty and physically demanding work environment along with strenuous physical labor. BENEFITS TAS Environmental Services offers a competitive benefits program, including comprehensive group health and related benefits plan. The following list of benefits is offered only to employees in regular (full-time) positions: Health & Wellness: Comprehensive Medical, Dental, and Vision Coverage Mental Health Support Programs Supplemental Benefits - Accident, Critical Illness, etc. Access to a company provided Employee Assistance Program Retirement & Financial: 401(k) with Company Match Life Insurance and Disability Coverage Work-Life Balance: Generous Paid Time Off (PTO) Paid Time Off increases based on years of service Holidays - seven (7) Floating Holidays - two (2) Professional Development: Access to Online Learning Platforms Annual Conference and Workshop Allowances Additional Perks: Work Boot Program Team Building Events Requirements RESPONSIBILITIES Handling various products, hazardous and non-hazardous materials Performing industrial work and biohazard cleanups Staging, profiling, and processing for disposal hazardous and non-hazardous waste Assist in the removal of soil, debris and other materials, and cleaning up spill sites Operate and clean equipment. Maintaining logs of working hours in compliance with all applicable state and federal regulations Up to 25% travel as needed - location may differ Other duties as assigned COMPETENCIES/SKILLS Strong observation skills Technical proficiency with field equipment Knowledge of environmental regulations Data collection and analysis skills Ability to work outdoors in all weather conditions Excellent communication skills Proficient in critical thinking Teamwork oriented Physical Requirements: While performing the duties of this job, the employee is regularly required to talk and hear This position requires standing, walking, bending, kneeling, stooping, crouching, crawling and climbing at times The employee must frequently lift or move items up to 60 pounds Must be able to frequently climb stairs and ladders May occasionally deal with heights Ability to wear Personal Equipment, including Respiratory Protection Consists of both office setting and physical jobsite Able to work in confined spaces when needed Education and Experience: HAZWOPER and Confined Space certifications preferred Ability to read, write and do mathematics Class C (Texas) or equivalent required Level 1 Technicians will be responsible for obtaining and maintaining several certifications while employed including: HAZWOPER 40 OSHA 10 and 30 MSHA(Mine Safety and Health Administration) Certification CSE/R(Confined Space Entry/Rescue) Certification CPR Certification H2S Certification First Aid Certification EEO/AA Employer/ Veteran/ Disabled Statement: TAS Environmental Services, LP provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. TAS Environmental Services, LP is recognized as a leading regional provider of Environmental Services. Our service offer includes Emergency Response, Industrial Cleaning, Waste Management and Midstream Services and Solutions. Our mission is to build unrivaled partnerships by being an invaluable safe resource to our customers through knowledge, collaboration, and the dedication of our people. We aim to deliver best-in-class performance across the business system while adhering to our core values and maintaining the highest standard of ethical business practices.

LOCATION MAINTENANCE & REPAIR TECHNICIAN - Part Time - Abilene, TX and surrounding area $21 / hour is eligible for $5 a month paid for monthly cellular phone allowance Approximately 5 - 10 hours per week Weekends and nights may be required Great Opportunity for part-time workers, students, or retirees looking for additional income - flexible work hours! BENEFITS for Part-Time Hires Smarte Carte Inc. offers for part-time Matching 401k, Overtime and Holiday Overtime COMPANY BACKGROUND Smarte Carte, Inc. is the leading concessionaire of self-serve vended luggage carts, electronic lockers, commercial strollers and massage chairs, as well as other passenger and guest services. Smarte Carte is headquartered in St. Paul, MN and has operations in the United States, Australia, Canada, Ireland, New Zealand, Norway, Singapore, Sweden, and United Kingdom. Are you looking for a job with a flexible schedule, great pay, and a fantastic work environment? Are you looking for a place to develop and build your career? Do you like to have your voice heard and be involved in process improvements? Then Smarte Carte is the place for you! A positive attitude and willingness to learn are the top qualities for our ideal candidate. Smarte Carte prides itself on having a diverse and inclusive workforce. All genders, ethnicities, and backgrounds are encouraged to apply. Smarte Carte is focused on being environmentally responsible by owning/operating recyclable equipment and reducing our carbon footprint. BASIC FUNCTION The Part-time Location Maintenance and Repair Technician is responsible for the service and maintenance of equipment at Mall of Abilene (strollers), and fitness clubs (massage chairs) within the Abilene and the surrounding area. KEY RESPONSIBILITIES Maintenance and repair of equipment Maintain clean equipment Accurate and timely collections, bank, and report financial transactions Maintain policy and procedure expectations of the facility and Smarte Carte Maintain regular contact with District Service Manager Improve revenue of location consistent with traffic changes and corporate performance levels Maintain a safe working environment by ensuring all equipment is in good repair and working as designed Maintain a positive relationship with the facility management Other assignments as needed. SKILLS Working knowledge of equipment Electrical and mechanical equipment repair Excellent verbal and written communication Maintain accurate records Compile reports Proficient in computer and Smartphone use LICENSES & CERTIFICATIONS Valid Drivers license required PHYSICAL REQUIREMENTS Lift 40 lbs. to waist height Push/Pull 75-100 lbs. Bend and stoop, walk and stand for long periods of time Visual acuity/manual dexterity to perform mechanical and electrical repairs

As a Geek Squad Advanced Repair Technician (Agent), you'll work at our local Best Buy store to provide technology support and repair customers' computers and other devices. You'll provide excellent customer experiences by listening to their needs and partnering with other Geek Squad Agents. You'll perform repairs by troubleshooting and following our procedures. If you're passionate about technology and ready to leverage your technical abilities to help customers get the most out of their tech, this might be the perfect role for you. What you'll do Perform diagnostic discoveries, make recommendations, repair devices and help customers both in-person and over the phone Establish and maintain consistent rhythms for timely follow-up and ensure expectations are met or exceeded Partner with other team members to maintain consistent and accurate documentation of customer requests and repairs Ensure all repair tasks are completed in a timely manner and partner with leaders when issues arise Maintain knowledge, skillsets and certifications through training courses Basic qualifications 6 months of experience diagnosing, troubleshooting or repairing technology products Experience actively using and learning about consumer electronics Ability to work a flexible schedule including holidays, nights and weekends Preferred qualifications Strong ability to prioritize and multi-task in a fast-paced environment What's in it for you We're committed to helping our people thrive at work and at home. We offer generous benefits that address your total well-being and provide support as you need it, especially key moments in your life. Our benefits include: Competitive pay Generous employee discount Financial savings and retirement resources Support for your physical and mental well-being About us As part of the Best Buy team, you'll help us fulfill our purpose to enrich lives through technology. We bring that to life every day by humanizing and personalizing tech solutions for every stage of life - in our stores, online and in customers' homes. Our culture is built on deeply supporting and valuing our amazing employees who make it all possible. We're committed to being a great place to work, where you can unlock unique career possibilities. Above all, we aim to provide a place where you can bring your full, authentic self to work now and into the future. Tomorrow works here.™ Best Buy is an equal opportunity employer. Application deadline: Minimum of 5 days from the posting date. You can find that date above the job title at the top of the page.

TEAM UP WITH US! The Technical Communicator II is responsible for providing internal and external customers with technical assistance. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Assist technicians on assignments through the repair process to ensure timely, cost effective and quality repairs are being completed. * Coordinate and work with Caterpillar engineers in resolving product issues. * Answer technical requests and inquiries to resolve product problems through diagnosis, personal knowledge and expertise, research, manufacturing contacts and engineering data. * Recognize, document and report product issues and assist in determining root cause that significantly affect customer satisfaction, productivity and/or operations. * Travels to customer sites within assigned region to assist in complex troubleshooting and ongoing issues to gain a better understanding of the specific repair and establish improvements in the repair process. * Attends necessary training in order to stay up to date on new products and challenges. * Utilizes Caterpillar system resources, such as SIS web, Product Support CRM (PSCRM), Dealer.Cat.com, Dealer Product Support Search (DPSS), Service Information Management System (SIMS I) /Continuous Product Improvement (CPI), to diagnose issues and evaluate possible solutions. * Proficient in using professional phone etiquette to field customer calls. WHAT YOU'LL NEED: * Associate's degree (A. A.) or equivalent from two-year college or technical school; or five (5) year related experience and/or training; or equivalent combination of education and experience. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Moderate computer skills. Familiar with web navigation, experience working with databases. * Must have valid drivers license and clean driving record. * Ability to write routine reports and correspondence. * Ability to speak effectively before groups of customers or employees of organization. * Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. * Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; outside weather conditions and vibration. The noise level in the work environment is usually moderate. Required travel up to 20%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA

INDUSTRY: Equipment Rentals, Oil & Gas CONTEXT: We are seeking skilled Generator Technicians to repair and service MQ Power generators, as well as other major brands. Candidates with generator experience across multiple manufacturers are encouraged to apply. While there is no minimum years of experience required, managerial-level expertise will be highly valued. The ideal candidate will possess a strong technical background, including knowledge of controls, reprogramming, electrical circuits, and megger testing. A solid work ethic, problem-solving skills, and the ability to work independently are essential. RESPONSIBILITIES: Diagnose, repair, and maintain MQ Power generators and other generator brands. Troubleshoot and reprogram generator control systems. Inspect, test, and repair electrical circuits and related components. Perform megger testing to ensure electrical insulation integrity. Maintain detailed service records and follow company procedures. Support team members and provide leadership if in a senior role. QUALIFICATIONS: Generator repair/service experience (any brand). Strong technical skills in controls, reprogramming, and electrical circuits. Experience with megger testing preferred. Managerial or leadership experience is a plus. Reliable, self-motivated, and safety-focused.

Job DescriptionSalary: Reinvigorate your career with an organization that values teamwork, expertise, and integrity. Were looking for an experienced Lead Valve Services Technician to join our growing team and take a leadership role in managing valve service operations, customer relationships, and business growth opportunities. This position is ideal for someone with hands-on relief valve experience, strong organizational and communication skills, and a passion for delivering top-quality service in the oil and gas industry. Who we are: At the Crimson Group, we provide our clients with high-value automation, instrumentation, electrical design, and process operation solutions. With the capabilities of a large enterprise, and the agility and responsiveness of a small company, we are a customer-focused provider of automation and integrated solutions. Crimson Group provides total integration of design, project management, panel manufacturing, installation/commissioning, maintenance, and repair for North America and select international markets. What we Offer: Competitive hourly compensation. Comprehensive benefit package and 401k plan. A company laptop and cell phone reimbursement. An environment of continuous learning with the opportunity to enhance your skills & experience and grow within the organization. The opportunity to participate in charitable events through our charity, RedTail Community Foundation. What you will be Doing: Oversee and execute valve testing, inspection, repair, and maintenance activities. Assist with scheduling, resource allocation, and service documentation for multiple client projects. Develop and maintain strong client relationships to ensure satisfaction and repeat business. Lead, mentor, and support valve technicians in the field and shop, ensuring safety and quality standards are upheld. Perform or supervise testing and calibration of relief valves to meet company and safety standards. Assist in troubleshooting and problem-solving of complex valve issues. Track project progress, costs, and customer requirements to ensure timely delivery. Collaborate with operations, sales, and management to identify growth opportunities in valve services. Support business development by identifying client needs and assisting with proposal or quote preparation. Maintain detailed records of work performed, certifications, and compliance documentation. Your Skills and Qualifications: 35+ years of hands-on experience with relief valves, safety valves, and related pressure control equipment. Previous experience in a lead technician, coordinator, or supervisory role. Proven customer service and account management skills with the ability to build trust and long-term relationships. Excellent leadership, communication, and organizational skills. Proficiency with scheduling tools, maintenance tracking systems, and Microsoft Office Suite. Ability to manage competing priorities and meet deadlines in a fast-paced service environment. A valid drivers license and willingness to travel occasionally to client sites. Technical training or certification in mechanical, instrumentation, or valve technology. Background in oil & gas, industrial maintenance, or manufacturing. Safety-conscious, reliable, and proactive approach to problem-solving. A results-driven mindset with a focus on quality, customer satisfaction, and continuous improvement. **As part of our commitment to maintaining a safe and professional work environment, the Crimson Group of Companies conducts comprehensive background checks and drug and alcohol testing on all prospective employees as part of the final offer process. These checks are intended to verify the accuracy of information provided by candidates and assess any potential risks to the company or its employees. All offers of employment are contingent upon the successful completion of these background checks.** Please note: We do not accept phone calls regarding job opportunities. To ensure fairness and consistency in our hiring process, all candidates must follow the application instructions outlined in the posting. Thank you for your understanding.

Description: TEAM UP WITH US! The Screw Compressor Repair Technician is responsible for the teardown and rebuild of a variety of valves and packing cases to meet OEM Standards. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: Tear down and inspect various screw compressors. Change gears, bearings, and seals in screw compressors, as necessary. Blind and air test to the shop air pressure values. Tear down and inspect a variety of valves and packing cases. Be able to read dial calipers. Recommend solutions or alternate methods to meet requirements. Basic hand tool knowledge. Able to stand and operate a sand blaster. Basic machining knowledge. Basic shop maintenance and clean up. Other duties may be assigned. WHY WORK WITH US? We like to take care of business and have fun doing it! We offer health, dental, vision, life, and more as a comprehensive benefits package. Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this job, the employee is regularly required to sit, talk or hear. The employee is occasionally required to stand and walk. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually high. Required travel up to 10%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA Requirements: WHAT YOU'LL NEED: Minimum 3 years mechanical shop/field experience. Observes safety procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively to customers or employees of organization. Knowledge of MS Office and operate a Windows based computer. Pro-active, problem-solving individual who is able to manage a varied workload with constantly changing priorities. Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Successfully complete Work Steps assessment.

The Apprentice Nondestructive Testing technician assists the Technician or Sr Technician performing inspections utilizing various NDT techniques seeking corrosion, defects, or detrimental conditions in accordance with specific written criteria. The Apprentice may calibrate instruments or perform other duties under the supervision of a certified Technician / Sr Technician. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern * Performs all duties as assigned and adheres to TEAM's Core Values * Assists the Technician or Sr. Technician on NDT inspections * Studies to gain NDT certifications while assisting and learning hands on experience in various NDT methods * Other duties as assigned Job Qualifications * High school diploma or equivalent required * An understanding of basic math * Ability to work in Microsoft Word * Ability to work with computers / computerized equipment * Ability to read, understand, and communicate in English * Travel requirement; 0-75% * Ability to handle chemicals in a safe manner * Ability to follow instructions * May be required to travel out of town on a periodic basis Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere * Interaction with other crew employees, as well as supervisors and client personnel * Working in plant and/or shop areas around production machinery with extreme noise levels * Must be able to wear safety equipment as required by the safety department for personal protection * May be at more than one job site in a day and must be able to tolerate climate changes Physical and Mental Requirements * Ability to lift and carry 75 pounds * Must be able to walk and climb except when performing non-field duties * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells * Ability to maintain focus and multitask effectively * Excellent communication skills

TEAM UP WITH US! The EPG Technical Communicator II is responsible for providing internal and external customers with technical assistance. DO YOU HAVE WHAT IT TAKES? WHAT YOU'LL DO: * Assist technicians on assignments through the repair process to ensure timely, cost effective and quality repairs are being completed. * Coordinate and work with Caterpillar engineers in resolving product issues. * Answer technical requests and inquiries to resolve product problems through diagnosis, personal knowledge and expertise, research, manufacturing contacts and engineering data. * Recognize, document and report product issues and assist in determining root cause that significantly affect customer satisfaction, productivity and/or operations. * Travels to customer sites within assigned region to assist in complex troubleshooting and ongoing issues to gain a better understanding of the specific repair and establish improvements in the repair process. * Attends necessary training in order to stay up to date on new products and challenges. * Utilizes Caterpillar system resources, such as SIS 2.0, SIS2Go, Remote Services, Product Support CRM (PSCRM), Catdealer.com, Dealer Product Support Search (DPSS), Service Information Management System (SIMS I) /Continuous Product Improvement (CPI), to diagnose issues and evaluate possible solutions. * Proficient in using professional phone etiquette to field customer calls. WHAT YOU'LL NEED: * Associate's degree (A. A.) or equivalent from two-year college or technical school; or five (5) year related experience and/or training; or equivalent combination of education and experience. * Extensive experience troubleshooting Generators, Gensets, and Switchgear along with Natural Gas and Diesel Engines. * Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. * Moderate computer skills. Familiar with web navigation, experience working with databases. * Must have valid drivers license and clean driving record. * Ability to write routine reports and correspondence. * Ability to speak effectively before groups of customers or employees of organization. * Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. * Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. WHY WORK WITH US? * We like to take care of business and have fun doing it! * We offer health, dental, vision, life, and more as a comprehensive benefits package. * Don't you want to work with awesome people? IMPORTANT INFORMATION: While performing the duties of this job, the employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl and talk or hear. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus. The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts; high, precarious places; fumes or airborne particles; outside weather conditions and vibration. The noise level in the work environment is usually moderate. Required travel up to 40%. This position is considered a safety sensitive position. The Job description is subject to change by the employer as the needs of the employer and requirements of the job change. EEO/AA

Love fixing tech and want a job on the go? Join uBreakiFix by Asurion as a Field Technician and get paid to travel locally, solve tech problems, and make customers smile-all while growing your skills and career. Why You'll Love It: Starts at $15/hr + monthly incentive Health, dental, vision & life insurance Paid time off Ongoing training & career development Your office is our company van-freedom & flexibility What You'll Do: Drive a fully equipped repair van to customer locations Diagnose and repair smartphones, tablets & other tech Deliver friendly, in-home service experiences Promote device protection + support plans What You'll Bring: Experience in customer service, tech repair, or retail Comfortable driving and working independently Basic mobile OS/hardware knowledge and soldering Great communication + problem-solving skills Flexible availability (retail hours + weekends) If you're tech-savvy, customer-obsessed, and ready to hit the road, and start building your career, one repair at a time. uBreakiFix by Asurion is proud to be an equal-opportunity employer, committed to providing equal employment opportunities regardless of race, color, ancestry, religion, gender, national origin, sexual orientation, age, citizenship, marital status, disability, or veteran status.

Energy Transfer, recognized by Forbes as one of America's best large employers, is dedicated to responsibly and safely delivering America's energy. We are driven to inspire our employees to create superior value for our customers, our investors, a sustainable future and giving back to the community where we have long-standing commitments to causes including MD Anderson Children's Cancer Hospital, The Salvation Army, American Heart Association, Ronald McDonald House and many more. We value all of our employees who make our growth and success possible. We are proud to offer industry leading compensation, comprehensive benefits, 401(k) match with additional profit sharing, PTO and abundant career opportunities. Come join our award winning 11,000 strong organization as we fuel the world and each other! Summary: The primary responsibility for the Equipment Technician position is collecting, analyzing, and reporting the health of rotating equipment based on multiple technologies including vibration, thermography, oil analysis, pump and motor performance, compressor and engine performance and key operating parameters. This position works closely with operations, engineers, specialists, and maintenance personnel in troubleshooting and repairs. This position will provide support for multiple sites. Essential duties and responsibilities: To perform this job successfully, an individual must be able to perform each essential job duties satisfactorily. The requirements for this position are listed below: * Develop and maintain vibration analysis program. Establish equipment routes and frequency. Collect and enter equipment data necessary for proper vibration analysis. * Proficient with rotating and/or reciprocating equipment analysis techniques and perform as required * Proficient with motor and/or engine analysis techniques and perform as required * Develop and maintain lube oil analysis program establishing routes and frequency * Periodic (monthly, quarterly, etc.) data acquisition from equipment, including vibration data with portable systems, critical machinery performance metrics (flow rates, equipment rotating speed, temperatures, and process flow characteristics) and lube oil samples and analysis * Perform analysis of data to resolve or proactively anticipate equipment failures * Lead and/or assist in root cause failure analysis utilizing the TapRoot process * Implements continuous monitoring systems, such as alarm, report, and acceptance regions * Coordinate scheduling of repairs by taking ownership of notifications and corresponding follow-up * Monitor equipment repairs in the field and at vendor shops * Report equipment deficiencies in SAP system making recommendations for corrective action * Collaborate with responsible Maintenance/Reliability Specialist, engineers, planners, Operations Managers and supervisors to ensure proper priorities are placed on deficiencies and continuous learning/improvement process is fostered * Support the lubrication program by monitoring its effectiveness or, when required, take samples, interpret analysis and take corrective actions Required education: * High School Diploma or GED * Required experience is commensurate with the selected job level: * Level C requires a minimum of 0-2 years of relevant experience in an oil and gas operations role or equivalent work experience * Level B requires a minimum of 2-4 years of relevant experience in an oil and gas operations role or equivalent work experience * Level A requires a minimum of 4+ years of relevant experience in an oil and gas operations role or equivalent work experience Preferred Qualifications: Solid troubleshooting skills and ability to interpret and analyze data Strong computer skills with experience in Microsoft Office suite. Working Conditions: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment * Frequent heavy lifting with and without assistance * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required