Service technician jobs in Clarksburg, MD - 3,773 jobs

MANTECH seeks a motivated, career and customer-oriented In-Place Monitoring System (IPMS) Technician to join our team in Springfield, VA. Responsibilities include but are not limited to: Ensure IPMS Operational Readiness and Compliance: Guarantee the continuous staffing and efficient operation of the IPMS console, ensuring timely resolution of all signals and anomalies that meet established threat thresholds. Maintain strict compliance with national and agency-level policies, reporting, and training requirements. Conduct Comprehensive IPMS Monitoring and Analysis: Perform daily tactical and strategic analysis using procedure guides, and execute daily, monthly, and annual operations and maintenance tasks. This includes identifying and troubleshooting system malfunctions, and reporting findings and status to customers. Resolve IPMS Anomalies and Report System Health: Operate, maintain, and troubleshoot the garrison IPMS, coordinating the resolution of IPMS anomalies with TSCM personnel. Detail all resolved signals in monthly and quarterly reports, and report IPMS console health status when operational capability is diminished. Advance IPMS Capabilities and Best Practices: Research and investigate new or improved industry practices and tradecraft for application to agency IPMS programs and operations. Assist in identifying and implementing best practices related to IPMS and wireless efforts. Perform Radio Frequency (RF) Signal Analysis: Conduct RF signal of interest searches and accurately assess and locate signals discovered during surveys, system notifications, and IPMS operations. Minimum Qualifications: 6+ years of writing and editing of technical documents. Experience with RF theory and direction finding. Interagency Training Center (ITC) TSCM Certification Must complete at least 40 hours of discipline-specific development or refresher training every fiscal year. The customer will sponsor Government-offered, discipline-specific development or refresher training IAW National and DoD standards Shall meet minimum training requirements, within one calendar year of assignment, for access to DoD networks in accordance with DoDD 8140.01, by attaining and maintaining at least baseline certification for DoD 8570.01-M Information Assurance Technician Level II (IAT2) compliance. Desired Qualifications: Bachelor's degree in Computer Science, Engineering, or a related technical discipline Credentialed graduate of an accredited federal or DoD CI training academy (ex. FBI Academy, etc.) Clearance Requirements: Must have a TS/SCI with the ability to pass a Poly Physical Requirements: The person in this position must be able to remain in a stationary position 50% of the time. Occasionally move about inside the office to access file cabinets, office machinery, or to communicate with co-workers, management, and customers, via email, phone, and or virtual communication, which may involve delivering presentations.

Help keep our clubs safe, shiny, and member-ready! Why you'll love it Your work is visible and valued-members enjoy safer, cleaner clubs, and teams can focus on delivering great workouts because you've got the facilities dialed in. About the role You're the go-to problem solver who makes the Ultimate Fitness Experience possible. Using ServiceChannel, you'll manage work orders, knock out repairs, and keep our clubs safe and functional-with plenty of high-five moments from happy teammates. What you'll do Manage and close out facility work orders in ServiceChannel, meeting KPI timelines. Prioritize urgent repairs and proactively communicate changes or delays. Perform routine club inspections to spot hazards and maintenance needs. Handle hands-on fixes: carpentry, tile, painting, drywall, and general building repairs. Complete assigned plumbing, electrical, and mechanical maintenance. Keep managers and the Facilities team updated on repair status and timelines. Travel between assigned clubs in your own vehicle (mileage reimbursed). Support after-hours/emergency on-call needs as scheduled. Attend required meetings and follow all club, service, and emergency procedures. What you bring 1-4 years of facilities experience (preferred). Basic skills in carpentry/painting/drywall and general repair. Foundational understanding of commercial electrical, plumbing, and mechanical systems (apprentice or supervised experience welcome). Familiarity with ServiceChannel or similar CAFM/FMS. Strong work ethic: punctual, organized, detail-oriented, and safety-minded. Friendly, professional, and patient communicator (verbal & non-verbal). Clean, professional appearance and great customer service instincts. Ability to choose and use the right tools safely and effectively. Valid Driver's License and willingness to work flexible hours. Multi-site facilities maintenance experience (essential). Relevant facilities certifications are a plus. Perks & benefits Complimentary gym membership + guest privileges Discounts on Personal Training, Mind&Body, Aquatics, Kids Programs Discounts on Serenity Day Spa services and apparel Employee referral gift In-house continuing education + CEC reimbursement Full-time extras: Medical, Dental, Vision, Supplemental & Group Life Insurance, 401(k), Paid Time Off US FITNESS IS AN EQUAL OPPORTUNITY EMPLOYER Know Your Rights Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities

An instrument repair cleaner's job is to detail and clean rental instruments and prepare them to return to stock in a timely and proficient manner. Essential Functions (not all-inclusive): Detail and clean instruments in a timely manner based on production standards Report quality control rejects Perform general warehouse and distribution tasks Other duties as assigned About Music & Arts Music & Arts embodies the world of creativity and music by encouraging our teammates to find their own individual sound. We strive to create lifelong musicians and make a difference in the world by enabling musicians and non-musicians alike to experience the almost indescribable happiness that comes from playing an instrument. We believe in putting our customers first, engaging with respect and integrity and fulfilling our mission with passion. The first Music & Arts was located in a small house in Bethesda, MD and run by founder Benjamin O'Brien. When Music & Arts opened its doors in 1952, we offered printed music, music lessons, dance lessons, and art supplies. Ben decided shortly after opening his business that he wanted to focus on music to better serve his customers -- a decision that remains intact to this day. Since the 1990's, Music & Arts has expanded nationwide through organic growth and a series of acquisitions and mergers with other music dealers. In 2005, Music & Arts joined forces with American Music to become the largest band and orchestra instrument retailer in the United States. Based in Frederick, MD, Music & Arts is now part of the Guitar Center enterprise and comprises 225+ retail stores, 200+ educational representatives, and 250+ affiliate locations. To join our band, you'll need the following experience: High School Diploma or GED required. Pay Rate: $15.00/hr The job posting is not necessarily reflective of actual compensation that may be earned, nor a promise of any specific pay for any specific employee, which is always dependent on actual experience, education, and other factors. The pay range(s) listed are provided in compliance with state specific laws. Pay ranges may be different in other locations. Love this gig and want to apply? Send your resume and cover letter today along with salary expectations! Music & Arts is an Equal Opportunity Employer and provides fair and equal employment opportunity to all employees and applicants regardless of race, color, religion, gender, sexual orientation, gender identity, national origin, age, disability, veteran status or any other protected status prohibited under Federal, State, or local laws. All employment decisions are based on valid job‐ related requirements. If you are a qualified individual with a disability or a disabled veteran and are unable or limited in your ability to use or access our website, you may request a reasonable accommodation to express interest in a specific opening. You can request reasonable accommodation by calling 1‐************ ext. 2862 or by sending an email to ***************************.

EQUIPMENT TECH-RESPIRATORY CARE Westminster, MD CARROLL HOSPITAL RESPIRATORY THERAPY PRN - Weekends - As Needed - Hours Vary SUPPORT SERVICES 92085 $17.00-$21.60 Experience based Posted: January 12, 2026 Apply Now // Setting the Saved Jobs link function setsavedjobs(externalidlist) { if(typeof externalidlist !== 'undefined') { var saved_jobs_query = '/jobs/search?'+externalidlist.replace(/\-\-/g,'&external_id[]=')+'&saved_jobs=1'; var saved_jobs_query_sub = saved_jobs_query.replace('/jobs/search?','').replace('&saved_jobs=1',''); if (saved_jobs_query_sub != '') { $('.saved_jobs_link').attr('href',saved_jobs_query); } else { $('.saved_jobs_link').attr('href','/pages/saved-jobs'); } } } var is_job_saved = 'false'; var job_saved_message; function savejob(jobid) { var job_item; if (is_job_saved == 'true') { is_job_saved = 'false'; job_item = ''; $('.saved-jobs-alert__check').toggle Class('removed'); $('.saved-jobs-alert__message').html('Job has been removed.'); } else { is_job_saved = 'true'; job_item = ''+'--'+jobid; $('.saved-jobs-alert__check').toggle Class('removed'); $('.saved-jobs-alert__message').html('Job has been saved!'); } document.cookie = "c_jobs="+job_item+';expires=;path=/'; $('.button-saved, .button-save').toggle Class('d-none'); $('.button-saved').append(' '); $('.saved-jobs-alert-wrapper').fade In(); set Timeout(function() { $('.button-saved').html('Saved'); $('.saved-jobs-alert-wrapper').fade Out(); }, 2000); // Setting the Saved Jobs link - function call setsavedjobs(job_item); } Save Job Saved Summary Who We Are: LifeBridge Health is a dynamic, purpose-driven health system redefining care delivery across the mid-Atlantic and beyond, anchored by our mission to “improve the health of people in the communities we serve.” Join us to advance health access, elevate patient experiences, and contribute to a system that values bold ideas and community-centered care. JOB SUMMARY Under Minimum supervision, the Equipment Tech responds to calls for respiratory therapy equipment and compressed gas cylinders needs throughout the hospital. Responsible for the delivery of compressed gas cylinders, maintenance of respiratory care equipment and support of the respiratory care services staff. Performs all duties that are required of a respiratory care support services technician. Oversees and indirectly manages student tech activities within the department. Also, ensures that all tech services are delivered in accordance with the mission statement and SPIRIT values of Carroll Hospital Center. Under minimal supervision, performs a variety of administrative, secretarial and complex clerical duties for the team. Follows complex oral and written instructions, uses independent judgment and word processing software, follows established office procedures and is familiar with departmental and hospital policies. Performs various clerical and administrative duties depending on administrators needs which may include collecting and preparing data for management assignments, reports and presentations and assisting with monitoring department QI/PI initiatives. Appropriately direct calls takes accurate messages or responds to calls by utilizing knowledge of policies procedures and practices. Works to support audiovisual needs of the dept and produces educational videos and power points for staff meetings, educational events and QI/PI tracking initiatives. REQUIREMENTS Preferred High School Diploma 1-3 years Preferred SPECIFIC REQUIREMENTS Must be enrolled in an approved Respiratory program. Additional Information What We Offer: Impact: Join a team that values innovation and outcomes, delivering life-saving care to our youngest and most vulnerable patients. Growth : Opportunities for professional development, including tuition reimbursement and developing foundational skills for neonatal critical care leadership and advanced certification. Support: A culture of collaboration with resources like unit-based practice councils and advanced clinical education support - improving both workflow efficiency and patient outcomes and allowing you to work at the top of your license. Benefits : Competitive compensation (additional compensation such as overtime, shift differentials, premium pay, and bonuses may apply depending on job), comprehensive health plans, free parking, and wellness programs. Why LifeBridge Health? With over 14,000 employees, 130 care locations, and two million annual patient encounters, we combine strategic growth, innovation, and deep community commitment to deliver exceptional care anchored by five leading centers in the Baltimore region: Sinai Hospital of Baltimore, Grace Medical Center, Northwest Hospital, Carroll Hospital, and Levindale Hebrew Geriatric Center and Hospital. Our organization thrives on a culture of CARE BRAVELY-where compassion, courage, and urgency drive every decision, empowering teams to shape the future of healthcare. LifeBridge Health complies with applicable Federal civil rights laws and does not discriminate on the basis of race, color, national origin, age, disability, sex or sexual orientation and gender identity/expression. LifeBridge Health does not exclude people or treat them differently because of race, color, national origin, age, disability, sex or sexual orientation and gender identity/expression. Share: talemetry.share(); Apply Now var jobsmap = null; var jobsmap_id = "gmapwrsvg"; var cslocations = $cs.parse JSON('[{\"id\":\"2092413\",\"title\":\"EQUIPMENT TECH-RESPIRATORY CARE\",\"permalink\":\"equipment-tech-respiratory-care\",\"geography\":{\"lat\":\"39.5582432\",\"lng\":\"-76.9908346\"},\"location_string\":\"200 Memorial Avenue, Westminster, MD\"}]'); function tm_map_script_loaded(){ jobsmap = new csns.maps.jobs_map().draw_map(jobsmap_id, cslocations); } function tm_load_map_script(){ csns.maps.script.load( function(){ tm_map_script_loaded(); }); } $(document).ready(function(){ tm_load_map_script(); });

Achieving our goals starts with supporting yours. Grow your career, access top-tier health and wellness benefits, build lasting connections with your team and our customers, and travel the world using our extensive route network. Come join us to create what's next. Let's define tomorrow, together. Description At United, we have some of the best aircraft in the world. Our Technical Operations team is full of aircraft maintenance technicians, engineers, planners, ground equipment and facilities professionals, and supply chain teams that help make sure they're well taken care of and ready to get our customers to their desired destinations. If you're ready to work on our planes, join our Tech Ops experts and help keep our fleet in tip-top shape. The sign-on bonus is exclusively for external candidates, internal applicants are not eligible to receive the sign-on incentive. Key Responsibilities: Requires a thorough knowledge of general building maintenance with emphasis on electrical solving, including AC & DC circuits, high voltage (480), high amperage and some 400 cycle equipment Requires experience in industrial wiring and the ability to read and follow wiring schematics and work without supervision Journeyman electrical license a plus Requires the ability to make low and high voltage repairs to all building electrical equipment This includes solving, installation and repair of 110/220/480 volt single and multiphase electrical circuitry and devices You should also have some experience in related building equipment and trades, such as air handling units, plumbing and steam fitting, fire systems and conveyors Facilities Technicians must be able to work around the clock shifts, including weekends and holidays, in the outdoors in all weather conditions Schedules are bid and awarded according to seniority Facilities Technicians are represented by the International Brotherhood of Teamsters (IBT) Salary increases will be administered according to the current IBT/United contract New employees are required to join the union within ninety (90) days of employment There is an initiation fee for joining the union and subsequent monthly union dues which are set by the Local Lodge Qualifications United values diverse experiences, perspectives, and we encourage everyone who meets the minimum qualifications to apply. While having the “desired” qualifications make for a stronger candidate, we encourage applicants who may not feel they check ALL of those boxes! We are always looking for individuals who will bring something new to the table! What's needed to succeed: Twenty Four months experience required in at least three of the following areas: Electrical (including 480 volt, 3 phase) Structural (including steel frame construction) HVAC (including building management systems) Mechanical (including conveyors) Plumbing PLC electronic/computer controls Must have completed high school diploma, GED or equivalent Ability to maintain and repair all building disciplines, heavy mechanical and welding Work may be indoors or outside or in elevated areas anywhere on airport Must be able to climb and work from ladders, and/or walk for extended periods Moderate lifting Must possess sufficient tooling to perform required tasks Computer experience for input and retrieval of data Qualified candidates must be immediately available for full time employment Must possess a valid, clean, applicable state driver's license What will help you propel from the pack: Electronics diagnostics and troubleshooting United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact ...@united.com to request accommodation. The starting rate for this role is $34.52. This is also a bonus eligible position (i.e. profit sharing). We offer competitive benefits: medical, dental, vision, life, accident & disability, employee assistance program, commuter, paid holidays, paid time off, 401(k), pension and flight privileges (subject to the respective collective bargaining agreement). United Airlines is an equal opportunity employer. United Airlines recruits, employs, trains, compensates and promotes regardless of race, religion, color, national origin, gender identity, sexual orientation, physical ability, age, veteran status and other protected status as required by applicable law. Equal Opportunity Employer - Minorities/Women/Veterans/Disabled/LGBT. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform crucial job functions. Please contact ...@united.com to request accommodation.

Do you have a passion for repairing cars, assisting with providing exceptional guest experiences, and being an innovator in the automotive industry? As a Service Technician, you will have the opportunity to make a positive impact on our business and customers every day while earning the pay you deserve and awesome benefits! We are looking for smart, energetic, technically-focused Technicians who will help us redefine the car-servicingexperience. Does this sound like you? Apply now! The "B" Level Service Technician has the responsibility of understanding and completing routine repairs necessary for the repair of customer vehicles. This individual will perform general repairs and diagnosis with some assistance. These repairs include but are not limited to light engine work, transmissions, clutches, drive shafts, electrical systems (starters and alternators) HVAC systems, steering & suspension systems. This individual will have a majority of their manufacture certifications. Make accurate use of the multi-point inspection form on each vehicle Document all work performed and recommended on assigned repair order Communicate with service advisor when additional work is needed or if repairs cannot be completed within the promised time Maintain technician proficiency as specified by Asbury standards Conduct road test to determine work needed and to confirm work was successfully completed when necessary and practical Perform all levels of diagnosis and repair on vehicles Perform all levels of preventive/routine maintenance services Utilize product and technical training as assigned by the manufacturer and management Participate in manufacturer-sponsored training programs and schools to continuously expand your knowledge of new technology Maintain manufacturer (CSI) Customer Satisfaction Index at or above the Asbury specified goal(s) in service for district, regional and national scores Complete the work, notations and time-keeping necessary to the successful completion of warranty repair orders and the filing of warranty claims Report to management any situation or condition that would jeopardize the safety, welfare, or integrity of the dealership, its customers or employees Take care to ensure that customer's vehicles are returned to them as clean as they were prior to being serviced Understand and complete required training for compliance with federal, state, and local regulations, such as hazardous waste disposal, OSHA Right-to-Know, etc. Comply with all federal, state and local laws, as well as company policy, regarding safeguarding all customer vehicles, property and information ASE certifications heavily preferred Manufacturer certifications heavily preferred Previous automotive technician experience required Must have basic tools Must have great technical and mechanical skills Must be a team player and have the ability to work repetitively on complex tasks Must be a minimum of eighteen years of age Must have a valid driver's license Must be able to pass pre-employment screening (background & drug test) Company Benefits: Pay and Recognition: Paid holidays & paid time off Deferred Holiday Pay Match Paid training Stock Awards(select management and front-line team member's eligible Insurance / Retirement: Insurance: medical, vision, dental, accident, critical illness and hospital indemnity plans Up to 12 weeks paid pregnancy leave (disability leave) Paid Parental Leave Health savings Flex spending accounts (tax free) Short-term and Long-term disability plans Life Insurance (Whole Life and Term) 401k with company match Learning, Tuition Assistance and Career Development: * Digital career path tool to assist with career development * Continuous training through Asbury's Internal Learning Management System Professional growth and development opportunities Additional advantages: Student loan relief resources Employee assistance program Employee discounts on parts and service repairs Scholarship awards Opportunities to join our community service initiatives, which includes paid volunteer hours Aggressive Employee referral program with bonus opportunities INDKOONS

Terms of Employment • W2 Contract-to-Permanent, 12 Months • This position is primarily remote. Candidates must be comfortable working onsite from time to time in Reston, VA or Washington, DC. This would be highly infrequent. • Candidates based in Maryland, Washington, DC, Virginia, or West Virginia are highly preferred. Candidates based in Pennsylvania, Delaware, New Jersey, New York, North Carolina, Florida, or Texas will be considered secondarily. • Candidates must be comfortable conducting a final round, in-person interview in Reston, VA. Overview & Responsibilities Work with a leading health insurance organization as a Technical Lead, Mainframe Managed Services. You will act as a vital technical conduit between internal application teams and an external managed service provider (MSP), driving the modernization, security, and transformation of the z/OS mainframe platform. You will… • Lead and participate in the analysis, design, and implementation of mainframe engineering activities. • Provide technical instruction and guidance to a team of 10-15 senior system programmers at the Managed Service Provider (Ensono). • Support internal application teams (20+ Cobol and Java developers) by building CICS regions, MQ environments, and supporting DB2. • Oversee cyber security initiatives, including mainframe encryption (TLS/SSL) and TCP/IP connectivity. • Manage technical efforts related to a major 2026 project to de-couple a Sysplex environment into a standalone infrastructure. • Participate in troubleshooting and Root Cause Analysis (RCA) for complex system failures. Required Qualifications • 8+ years of experience as a Mainframe z/OS Systems Programmer. • Minimum 5 years of experience in RACF Security Administration (this is a critical need). • Strong hands-on experience with CICS TS and MQ Systems Programming. • Proficiency in mainframe networking components: TCP/IP, VTAM, Policy Agent, and FTP. • Experience working in a Sysplex environment. • Strong leadership skills with the ability to manage technical tasks through a third-party vendor. Preferred Qualifications • Experience with IBM z16 hardware and Dell/EMC storage subsystems. • Specific experience in de-coupling or breaking apart Sysplex environments. • Prior experience in the Health Insurance industry, specifically with claims processing or enrollment systems. • Knowledge of Pervasive Encryption and Ransomware solutioning for Mainframe. • Familiarity with IBM RMM for tape management.

MGX Field Crane Technicians are responsible for the inspection, diagnosis, repair, and maintenance of various crane equipment including mobile cranes and boom trucks. This position will be located at the Baltimore, Maryland branch for MGX Equipment Services and report to the Service Manager. * Candidates hired for this role will receive a $4,500 sign-on bonus, payable after 90 days continuous service; and be eligible for our Tool Reimbursement Program of up to $1,500 per calendar year ESSENTIAL JOB FUNCTIONS: Operates and inspects cranes to diagnose defects. Demonstrates working knowledge of CANBUS, PAT, EKS, ECOS, & MEGA-TRACK system. Examines parts for damage or excessive wear using micrometers and gauges. Reads, understands, and interprets operating/parts manuals, blueprints, and technical drawings. Test mechanical, electronic, electrical, and hydraulic products and equipment after repair or modification to ensure proper operation and compliance with OEM specifications. Prepares for jobs by checking parts and drawings for accuracy and completeness. Capable of accomplishing tasks independently without direct supervision. Perform thorough and accurate annual inspections. Properly fills out working reports, hours reports, time sheets, hours overviews and expense reports. Provides excellent customer service. Other duties as assigned. JOB REQUIREMENTS: High School Diploma or GED with a minimum of five (5) years of experience as a Mechanic/Technician. Experience working with different forms of mobile crane equipment, specifically Grove RT & TMS Cranes; Grove GMK European Cranes; Manitowoc EPIC and/or Traditional Cranes; National Boom Trucks preferred. Must be able to travel 50% of the time to job sites and for training as required. Must have excellent communication skills with a customer/client focus. Must possess a valid driver's license with a satisfactory driving record. Basic computer skills preferred. HEALTH & SAFETY REQUIREMENTS: Perform job functions in a safe manner. Wear all Personal Protective Equipment (P.P.E.) required by Company policy for the job being performed. Know and follow established job specific and facility wide safety and health procedures and rules. Actively participate in safety and health training and demonstrate competency based on training received. Bring safety and health issues, unsafe acts, and safety suggestions to management's attention or correct those you can. WORKING CONDITIONS: This is a full-time position with typical working hours between 7:00 am to 6:00 pm. Overtime and weekend work may be possible based on business conditions. The physical demands described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. This position will be required to work in an environment with exposure to elements such as extreme temperatures and various weather conditions, dirt, dust, fumes, smoke, unpleasant odors and/or loud noises. While performing the duties of this job, the employees is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. There is frequent lifting and/or moving of up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color and peripheral vision, depth perception and ability to adjust focus. BENEFITS: Competitive total rewards package including benefits and 401(k) beginning day one of employment. Continuing education and training opportunities; tuition reimbursement for those who qualify. Vacation and Holiday Pay Paid Parental Leave Team building, engagement events, and community involvement Scholarship Program And much more! PAY & TRAINING: This position offers a pay range between $25.00 - $45.00 per hour depending on skills and qualifications for non-bargaining employees. Pay is provided on a bi-weekly basis and there are 14 days in the pay period, beginning on a Monday and ending on a Sunday. A customized training plan and career path is identified for each technician and provided within the first week of employment, outlining growth and advancement opportunities.

Maintain and repair mechanical/electrical/boiler systems within a manufacturing environment; execute capital projects (installation, dismantling of equipment) and other various maintenance tasks throughout the facility. Expected hours of work 40 hours a week with a varied shift schedule 8-10 hours shifts with occasional overtime and weekend hours. No travel required. Duties And Responsibilities Reassemble machines after the completion of repair or maintenance work. Start machines and observe mechanical operation to determine efficiency and to detect problems. Inspect or test damaged machine parts and mark defective areas or advise supervisors of repair. Lubricate or apply adhesives or other materials to machines, machine parts, or other equipment according to specific procedures. Install, replace, or change machine parts and attachments according to production specifications. Dismantle machines and remove parts for repair using hand tools, chain falls, jacks, cranes, or hoists. Record production, repair, and machine maintenance information. Read work orders and specifications to determine machines and equipment requiring repair or maintenance. Set up and operate machines and adjust controls to regulate operations. Transport machine parts, tools, equipment, and other material between work areas and storage, using cranes, hoists, or dollies. Collect and discard worn machine parts and other refuse in order to maintain machinery and work areas. Clean machines and machine parts, using cleaning solvents, cloths, air guns, hoses, vacuums, or other equipment. Other duties as assigned. Required Knowledge/Skills/Abilities Knowledge of measuring gauges such as tape measures Knowledge of various hand and power tools Prior experience operating a forklift. Ability to comprehend complex technical topics and specialized information. Effective communication and problem-solving skills Understanding of basic math, reading, and writing skills Ability to work under pressure to complete assigned tasks under stressful situations. Ability to use hand& portable tools, gas and arc welder, forklift, pickup truck, testing equipment, tape measure, computer (shop floor and ERP). Education And Experience Required: Education - High School diploma or GED required. One to two (1-2) years related maintenance experience. Previous experience in the following maintenance areas preferred: electrical, plumbing, carpentry, welding, and boiler. Mechanical background with rotating equipment. Hydraulic and pneumatic. Electrical/mechanical troubleshooting. Working Conditions Fast paced manufacturing environment where workers are exposed to both ambient/outside temperatures and dust; working with mechanical parts and pinch points; exposure to increased noise levels. Exposure to hazardous mechanical, electrical and chemical substances/equipment. Confined workspaces. Physical Requirements OCCASIONALLY FREQUENTLY CONTINUOUSLY (0-30%) (31-60%) (61-100%) LIFTING OR CARRYING 1-10 LBS X 11-20 LBS X 21-40 LBS X 41-50 LBS 51 OR MORE LBS Pushing Or Pulling 1-40 LBS X 41-50 LBS X 51 OR MORE LBS X BENDING OR STOOPING X REACHING ABOVE SHOULDER LEVEL X DRIVING AUTOMATIC EQUIP. VEHICLES X OPERATE MACHINERY OR POWER TOOLS X CLIMBING (LADDERS, STAIRS, ETC.) X WALKING X STANDING X SITTING X WORKING IN EXTREME TEMPERATURES X REPETATIVE MOTION INCLUDING BUT NOT LIMITED TO: WRISTS, HANDS AND/OR FINGERS) X VISION X HEARING X DEXTERITY X HAND EYE COORDINATION X Personal Protective Equipment (PPE) Used Eye and hearing protection is required at all times on the production floor. Safety toe shoes (steel/composite). Flame Resistant rated Maintenance uniform provided. Other PPE as defined by management within assigned department.

Responsible for the hands-on installation, maintenance, and repair of complex Building Automation Systems (BAS), ensuring optimal performance, energy efficiency, and occupant comfort in commercial and industrial facilities, requiring strong technical skills in controls, programming, low voltage electrical and HVAC. Key Responsibilities Installation, Service & Commissioning Support: Assist with install and start-up of new BAS hardware (sensors, actuators, controllers) and software, loading programs and performing point-to-point checkouts. Troubleshooting & Repair: Diagnose and resolve complex malfunctions in HVAC, lighting, and other controlled systems, requiring extensive knowledge of digital controls. Programming & Software: Write, modify, update, and test control system software and programs, often using specific languages (e.g., , ). Maintenance: Conduct preventative maintenance, calibration of sensors, and routine servicing of BAS components and related equipment (e.g., air handlers, chillers, VAV and VRF). Customer Interaction: Interface directly with General Contractors, Building Engineers, Project Managers and other professionals to understand needs and ensure satisfaction. Collaboration: Work with engineers, electricians, and subcontractors to integrate systems and meet project goals. Documentation: Properly complete all project and service documentation and create work orders. Safety & Training: Adhere to strict safety protocols (PPE) and continuous self-study to maintain proficiency in evolving BAS technologies. Skills & Qualifications High School Diploma/GED; preferred degree/certs in BAS, HVAC, or related field (e.g., EPA). Experience with various BAS platforms (e.g., Siemens, Johnson Controls) and communication protocols (BACnet). Strong understanding of HVAC/R and electrical systems. Proficiency in computer skills, including software diagnostics and programming logic. Ability to read electrical schematics and work with hand/power tools. Excellent problem-solving, self-motivation, and communication skills. Work Environment Varies from office/control rooms to mechanical rooms, rooftops, and construction sites. Requires working independently and as part of a team, often in confined spaces or critical environments. Job Type: Full-time Benefits: 401(k) 401(k) 4% Match 401(k) matching Dental insurance Health insurance Paid time off Vision insurance People with a criminal record are encouraged to apply Work Location: In person

RUDDY. is a multi-divisional property management company serving the greater Washington D.C. area. The company provides comprehensive management and operational services for real estate assets and portfolios across residential and commercial sectors, working with institutional investment groups, syndicates, independent investors, and associations. Since its inception in 2022, RUDDY. has expanded from managing single-family properties to include multifamily, commercial, and association community management. Today, RUDDY. operates through three subsidiaries, covering all classes of residential real estate throughout D.C., Maryland, and Virginia. Role Description This is a full-time role based in Washington, D.C. The Maintenance Technician will be responsible for performing maintenance and repair tasks, troubleshooting equipment and systems, conducting preventive maintenance, and ensuring the proper functioning of industrial and residential facilities. The role involves identifying and resolving issues efficiently to meet the needs of the managed properties while adhering to safety and quality standards. Qualifications Proficiency in Equipment Maintenance, Troubleshooting, and Industrial Maintenance Strong skills in Preventive Maintenance and identifying potential issues before failure Experience in Maintenance & Repair of residential or commercial properties Excellent problem-solving skills and attention to detail Relevant certifications or technical training is a plus Ability to work both independently and collaboratively Familiarity with safety and operational standards

Monro's family of brands is one of the leading automotive service and tire dealers in the United States. We work on approximately five million vehicles a year, but with us, it is personal. Every guest is important, and every teammate is valued. That is our people-first approach. Headquartered in our hometown of Rochester, New York, where our founder, Chuck August, opened his first store in 1957, we have grown to nearly 1,300 auto repair shops and tire dealers in 32 states from coast to coast. Monro powers 16 highly respected tire and auto service brands, supporting each company's regional strength and community connections. From big cities to small towns to rural crossroads, you will find us in neighborhoods of every shape, size, and color. Under the Monro banner, we are united TEAM, and share the same mission to bring our guests the highest quality tire and auto service in the industry. Do you have what it takes to shape a better future for yourself and the automotive service industry? Our vision is to be America's leading auto and tire centers, trusted by consumers as the best place in our neighborhoods for quality automotive maintenance and repairs. We're looking for motivated individuals at every stage in their career who share our vision. Positions are available in our retail locations across our many brands, in field management, and in store operations at our Store Support Center in Rochester, New York. If you like helping others, as much as you like working on cars; if you enjoy being part of a team, solving problems, and building guest relationships, if you value honesty and integrity - we have a Destination for you at Monro. Destination Monro -Your Career is Here! About The Role: Compensation is $17-20 Per hour based on experience. The General Service Technician is a blended role with both front and back shop responsibilities, including at least two days per week dedicated to front counter duties. This position is responsible for performing routine vehicle repairs and maintenance in accordance with company standards and manufacturer specifications while effectively communicating vehicle issues and solutions to guests. Additionally, as a key holder and manager on duty (MOD) when needed, the General Service Technician plays a vital role in providing a superior guest experience, driving sales of automotive services and tires, and ensuring a welcoming in-store atmosphere. Job Description Responsibilities: Accurately perform basic vehicle services and repairs effectively and efficiently in accordance with Monro standards of operation. Tire Services - perform wheel removal, balancing, patch/plug repairs, changing, mounting, installation and TPMS service and repair. Vehicle Services - perform lubrications, oil changes, basic maintenance (e.g.: bulb, wiper blade and filter replacements, etc.), battery testing and installations. Consistently complete Monro's Courtesy Inspection process, on every guest vehicle, identifying, documenting, and communicating additional needed services and repairs. Assist in inventory management to include pulling tires and parts, unloading and stocking inventory. Assist with all general store duties, ensuring the store is in excellent condition and maintained to Monro standards for cleanliness and consistently in guest ready condition. Consistently perform service(s) in accordance with Monro's safety standards including but not limited to Monro's Wheel Torque, Oil safety and compliance procedures. Test drive vehicles in accordance with Monro's Road Test policy, including consistently dedicated test drive routes, while observing utilizing our all local traffic and safety laws. Understand and adhere to company policies and procedures, Governmental standards including environmental codes and ANSI/OSHA standards. Consistent use of all required safety standards set forth in training and policies and procedures. Maintain technical knowledge and capabilities to ensure proficiency through the timely completion of all required Monro University training courses and modules. Operate, utilize, and maintain all equipment in a safe manner in accordance with Monro and equipment manufacturer guidelines including but not limited to lifts, welders, brake lathes, etc. Under the direction of management, assists in various aspects of guest care, work order completion and register assistance, facility maintenance, and outside purchase ordering. This position is a secondary key carrier responsible for basic and detailed opening and closing responsibilities. Able to understand and effectively communicate all products and services Monro offers to guests. Perform other duties as assigned and required. Qualifications High School Diploma or equivalent is preferred. Automotive training including basic car maintenance and repair or the equivalent combination of education and experience. Must possess a current valid driver's license and have a satisfactory Motor Vehicle Report (MVR) and have the ability to operate customer's vehicles to conduct test drives. Required to own a basic set of tools or participate in Monro's tool purchase program. Work Environment & Physical Requirements: This job operates in an automotive shop environment. The job will have exposure to a moderate noise level, adverse weather conditions, chemicals, odors, dirt, and dust. General Service Technicians must be able to complete the following but not limited to: Ability to work flexible hours, days, evenings, weekends, and holidays. Must be able to see, and lift, carry and stock merchandise and supplies up to 50 lbs. without assistance. Frequent standing and walking for long periods of time. Frequent reaching overhead and below the knees, including squatting, bending, stooping,kneeling, twisting. Additional Information Benefits Performance based incentives Paid vacation and holidays for Full-Time Teammates Reimbursement for ASE Certifications Reimbursement for State Inspection Licenses, where applicable 401k eligibility immediately upon hire Direct Deposit Employee Discounts Healthcare, Vision, and Dental for Full time teammates Employee Access Perks Career Advancement Opportunities Your next Destination! Growth Opportunity: At Monro we're committed to helping our teammates grow their career through the combination of coursework, demonstrating leadership skills and open opportunities. Our teammates receive on-the-job training, company sponsored certifications, as well as course curriculum in Monro University that empowers them to advance to the next level of their careers. Monro, Inc. is an equal opportunity employer and affords equal opportunity to all applicants for all positions without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Are you ready to make a direct impact in the pharmaceutical manufacturing space? As a Process Equipment Technician, you'll play a critical role in keeping cutting-edge production lines running smoothly, ensuring life-changing medicines reach the people who need them. This is your chance to apply technical expertise in a high-impact environment where every detail counts. Why You Should Apply Be part of a team manufacturing products that truly improve lives Work hands-on with advanced granulation, drying, and milling technologies Gain exposure to cross-functional collaboration in engineering, quality, and production What You'll Be Doing Install, maintain, troubleshoot, and optimize process equipment for granulation and downstream operations Perform preventive maintenance, calibration, and repairs on complex systems Support equipment qualification (IQ/OQ/PQ) and process improvement projects Collaborate with engineers on optimization, upgrades, and investigations Document all work in compliance with cGMP standards About You Associate's degree in Mechanical, Industrial, or Chemical Engineering Technology preferred Hands-on experience with solid dosage / powder manufacturing equipment Skilled at troubleshooting mechanical, pneumatic, and electrical systems Knowledge of process qualification and regulatory documentation requirements Ability to interpret P&IDs, wiring diagrams, and schematics How To Apply We'd love to see your resume, but we don't need it to have a conversation. Send us an email to *********************** and tell me why you're interested. Or, feel free to email your resume. Please include Job#19534

Job Title: Maintenance Mechanic Shift: 2 nd , 3rd Shift Industry: Food Processing / Manufacturing Employment Type: Full-Time As a Maintenance Mechanic, you are directly responsible for maintaining and repairing machinery, equipment, and systems in a food processing environment. Job Responsibilities Perform visual inspections of machinery and equipment to identify defects such as breakage or excessive wear Troubleshoot and repair production or processing equipment, with a focus on modern automated systems Diagnose complex mechanical and electrical issues, implement effective solutions, and ensure compliance with safety standards during all maintenance activities Identify and respond to unusual machine noises or malfunctions to prevent downtime Work closely with fellow maintenance technicians and engineering staff to resolve technical problems Dismantle malfunctioning equipment and install new or repaired components as needed Clean, lubricate, and maintain parts including shafts, bearings, and gears to ensure smooth operation Support operation and maintenance of pneumatic, hydraulic, ammonia, and other critical systems Install and repair electrical components such as transformers, breakers, switches, receptacles, and machine wiring Maintain and repair the physical structures of production equipment and facilities Operate welding and cutting equipment for repair and fabrication tasks Conduct routine preventative maintenance on equipment to minimize unexpected breakdowns Read and interpret blueprints, technical diagrams, and equipment manuals Demonstrate the ability to work independently, showing initiative and self-motivation

Moore is a data-driven constituent experience management (CXM) company achieving accelerated growth for clients through integrated supporter experiences across all platforms, channels and devices. We are an innovation-led company that is the largest data, media, and marketing company in North America serving the purpose-driven industry with clients across education, association, political and commercial sectors. The Mechanical Maintenance will oversee the performance and maintenance of production machinery. Observe mechanical devices in operation and listen to their sounds to locate causes of trouble Dismantles devices to gain access to and remove defective parts MAINTENANCE & SERVICE Services equipment and other items as assigned Services or replaces defective parts Installs special functional and structural parts in devices Keeps an ongoing list of miscellaneous maintenance that needs to be done Sets up and operates equipment and tools to make and repair parts Uses and reads volt meter, computer, and tape measure Works overtime and weekends when necessary Oils and lubricate moving parts on machines to ensure effective performance Records and reports damaged, worn, or broken parts. Orders and installs replacement parts for machines. Identifies the causes of unexpected breakdowns of machines. Repair broken machines quickly and efficiently. QUALITY CONTROL Activates devices to test their performance Inspects used parts to determine changes in dimensional requirements Examines form and texture of parts to detect imperfections Check and recheck any work before putting the machine back online Adjusts functional parts of devices and control instruments SAFETY Checks to ensure that all areas in the plant meet OSHA standards Knows and follows all safety procedures Reports work-related injuries to supervisor Education: High School/GED or equivalent Benefits: Health insurance Paid time off. Dental insurance 401(k) Vision insurance Moore Company participates in committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. Moore Company is also committed to compliance with all fair employment practices regarding citizenship and immigration status. Moore Company participates in the E-Verify program. Must be authorized to work in the United States and successfully pass a comprehensive criminal background investigation.

Title: EMG Technologist Duration: 13 weeks Schedule: Days, 5x8 hours Weekly Gross: $1,850 - $1,957 Required Skills & Certifications: Minimum 2 years of EMG experience Physician Office experience BLS (AHA) Benefits: Pride Global offers eligible employee's comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors. About: Pride Health is the minority-owned healthcare recruitment division of Pride Global, an integrated human capital solutions and advisory firm. With our robust and abundant travel nursing and allied health employment options across the U.S., PRIDE Health will allow you to help change the way the world lives and heals as it connects you with the industry's leading healthcare organizations.

Job Title: ITS Lead - KEY Hours: Regular Full-Time Salary Range: $107k/yr - $131k/yr Clearance Requirements requires a current and active Secret Clearance at the time of application. What you will be doing: This position provides the highest level of support to end users by handling service requests that have been escalated by lower tiers. Support will be provided onsite, remotely, over the phone, or via email. They will be required to develop solutions for complex network, desktop, and server problems. They will have the ability to analyze existing systems and make proactive recommendations for improvements. Develops, maintains, and implements all systems, applications, and networking configurations. Position Requirements Minimum Requirements: Experience: * A minimum of 5+ years of experience * Advanced knowledge of current Microsoft desktop and server operating systems * Advanced knowledge of Microsoft SQL, Exchange, SharePoint, and other server applications * Advanced knowledge of computer and server hardware. * Familiarity with network troubleshooting. * Familiarity with Ivanti Management Suite, Microsoft SCCM, or Jamf Pro. * Professional customer service skill * Must be resourceful and able to take initiative in a dynamic environment. * Ability to troubleshoot technical problems effectively and efficiently. Education: * BA/BS from an accredited college or university * AA/AS with 7+ years experience. Certifications: * Require anyone of the following IAT Level II (CySA+, Security+, CND, or SSCP) Certification and CE/OS Certification. * PMI Certification required. * Windows or Apple Certified Technician Physical Demands This is largely a sedentary role; however, some filing is required. The ability to move files, open filing cabinets, and bend or stand as necessary would be required. Why JASINT? At JASINT, we proudly boast a together we can attitude. That is only possible with a strong talented team. Our goal is to answer the call to provide top mission and Warfighter support at all levels, and thats why we are seeking you! We understand and respect the dedication and sacrifice required to serve our nations greatest efforts, and our commitment, in turn, is to Support You! JASINT cares about your work-life balance and offers competitive benefits to help you at every stage of your personal and professional life by providing the following: Retirement/401k with an employer match, employer-paid health, dental, vision for employees, flexible spending accounts (HSA/FSA), company partially funded HSA, STD/LTD, professional development, tuition and certification reimbursement, spot award recognition, PTO, Floating Holidays. * JASINT offers internal and external referral bonuses for all cleared exceptional talent we hire! Friends of yours are friends of JASINT! * JASINT provides equal employment opportunities to all employees and applicants without regard to race, color, ancestry, national origin, gender, sexual orientation, marital status, religion, age, disability, gender identity, genetic testing results, or service in the military. Equal employment opportunity applies to all terms and conditions of employment, including hiring, placement, promotion, termination, layoff, recall, transfer, leave of absence, compensation, and training. JASINT participates in E-Verify and will provide the federal government with I-9 information to confirm that all new hires are authorized to work in the U.S. To learn more about E-Verify, please visit dhs.gov/e-verify.

at Whaley Foodservice ***HIRING IMMEDIATELY!!!**** ***Sign On Bonus Available for Qualified Service Technicians*** Whaley Foodservice, LLC is one of the largest commercial kitchen equipment repair service companies in the Southeast comprised of over 600 employees located across 31 geographically dispersed locations.Visit "Whaley Careers" to find your place to grow. ********************************* Pay Rate: $31.00-39.00/hour* At Whaley we know people are vital to our success. We offer a competitive salary, on-call pay, and generous benefits including Sign-On Bonuses for Experienced Technicians Company Vehicle | Mobile Device | Uniforms Meters & Test Equipment Industry Certification 401k & Profit Sharing Paid Holidays & Vacation Medical & Dental Benefits Short-Term Disability | Long-Term Disability Insurance (company paid) Life Insurance (company paid) To learn more about current opportunities, visit Whaley Careers: ********************************* Summary: The Service Technician II provides maintenance, service, and repair for commercial cooking equipment and commercial refrigeration i.e. grills, fryers, ovens, ice machines, reach-in and walk-in coolers, freezers, etc. Details: Diagnoses, troubleshoots, and repairs commercial cooking kitchen equipment, refrigeration. Communicates status updates for part order(s) and repairs with branch support and customer. Completes service calls accurately and timely. Audits truck stock to ensure required parts are stocked. Ensures service vehicle, tools, and uniforms are consistent with Whaley standards of safety. Meets on-call requirements. Required Education | Experience Three years of experience in commercial kitchen repair and or refrigeration. Must be 18 years of age. Completion of a satisfactory background check and drug screen is required. Valid Driver's license and driving record that aligns with our safety standard. Skills and Abilities Ability to work independently Ability to accurately diagnose and troubleshoot: an automotive, electrical, installation, and mechanical background is a plus. Journeyman License and or CFESA certification not required but would be a plus. Strong attention to detail. Excellent communication and soft skills. Good driving record Whaley Foodservice is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

We are hiring an energetic, motivated, innovative individual to be a part of our team supporting in Baltimore, MD. The Integrated Service Delivery (ISD) Tech Lead works closely with the ISD team, ISD Manager, and Tier 2 Managed Services Lead, to oversee the technical activities and workloads of their team, facilitate meetings with the customer and team, and ensure that support services satisfy consumer requests. The ISD Tech Lead must have strong communication and technical skills to motivate and encourage workers. They also use strong interpersonal skills to build relationships, and application customers. You will deliver technical guidance, and IT solutions that ultimately ensure that the functions of Medicare, Medicaid, and Marketplace are carried out for the US citizen and contribute to efforts to reduce healthcare costs. Candidate will collaborate closely with our internal teams to design, implement, fine-tune, and sustain our organization and client's cloud-based solutions. Candidate will be responsible for deploying and troubleshooting cloud systems, providing guidance on emerging cloud initiatives, and ensuring the integrity and security of our cloud infrastructure. The current work environment is remote leveraging various tools such as Slack, Microsoft Teams, and Zoom. Key skills needed. We need well versed in the following - Technical leadership with strong Linux (x86), zLinux, Windows Active Directory and AWS Cloud background experiences. Primary Responsibilities: Overseeing the technical aspects of the ISD techs, including troubleshooting, making design and architectural decisions, and supervising system modifications. Providing direction and mentorship in tech support and service delivery. Proven optimization experience with on-prem and AWS Cloud applications which leads to overall cost savings for the customer. Analyze and come up with a plan on optimization objectives with knowledge on how to implement. Site Reliability Engineering (SRE) proven experience with software engineering principles to IT operations and infrastructure to improve system reliability and scalability. Monitoring experience and ability to set up alerts in various tools (Datadog, Nagios, New Relic, etc.). Managing and facilitating meetings with associated action items and minutes. Ensure that teams are improving technical skillsets by using information gathered at customer and standup meetings to target areas that need improvement. Supporting and identifying customer issues and needs by maintaining an excellent relationship with end-users and stakeholders. Ensuring that systems, procedures, and methodologies are in place to support outstanding service delivery. Provide guidance and stewardship in Agile and DevOps practices that maximize flow. Contribute to a culture of continuous improvement by establishing and participating in feedback loops. Become a subject matter expert with Hybrid Cloud and Enterprise Shared Service offerings. Develop strong relationships and partnerships with the other ISD teams and customers. Basic Qualifications: BS degree and 12+ years of prior relevant experience or master's with 10+ years of prior relevant experience. Experience may be substituted in lieu of degree. Proven experience in cloud engineering or a related role. Night and weekend work required along with on-call responsibility. Certification in cloud platforms such as Azure, AWS, or GCP is preferred. Strong troubleshooting and problem-solving skills. Excellent communication and collaboration abilities. Client management skills for effective client interactions. Relevant training and certifications in cloud engineering. Knowledge of industry best practices for cloud solutions. Familiarity with security policies and cloud security best practices. Analytical skills to identify and resolve infrastructure vulnerabilities and deployment issues. Knowledge of the Software Delivery Life Cycle (SDLC). Build Tools: Jenkins, GitLab, GitHub. Configuration Management tools: Ansible, Terraform, Git. Efficient communication, zero handoff mentality. Excellent writing and verbal communication skills. Ability to manage conflict effectively. Ability to adapt and be productive in a fast-paced dynamic environment. Excellent communication and collaboration skills supporting multiple stakeholders and business operations. Self-starter, self-managed, and a team player. Preferred Qualifications: Ansible, bash and/or Python. To automate system administration or troubleshooting tasks. Linux and Windows OS. Proven ability to work with challenging customers. Experience with IaC and DevOps tools: Terraform, GitHub, Jenkins, JFROG. Experience and understanding of automating manual processes. Agile-based knowledge and skill, including experience with Scrum Ceremonies and work management tools (e.g., (JIRA, Confluence, Kanban). Required Clearance Ability to obtain a Public Trust clearance All candidates must have lived in the United States at least three (3) out of the last five (5) years prior in order to be considered.