Service technician jobs in Cloverleaf, TX

Securitas Technology Corporation, part of Securitas, is a world-leading provider of integrated security solutions that protect, connect, and optimize businesses of all types and sizes. More than 13,000 colleagues in 40 countries are focused daily on our purpose to help make your world a safer place and our commitment to deliver an unparalleled client experience. With clients at the heart of all we do, our people, knowledge, and technology power our connected ecosystem of health, safety and security solutions and services. We currently have an Embedded Installation Technician opening for team-oriented individuals possessing vocational training in electronics or electromechanical engineering. In this role, you will be responsible for providing service on our products at customer sites. The position provides customer contact for all post-installation problems on security systems and equipment, as well as, special project work, when needed. Responsibilities Services intrusion, fire, CCTV, and access control security systems. Performs scheduled, routing preventive maintenance on a variety of equipment/systems under contract agreement by inspecting, adjusting, cleaning, and calibrating systems and checking out equipment to ensure it's in satisfactory working order. Completes maintenance, within assigned hours, in a manner that reduces emergency calls and results in achieving the goal of zero call backs. Assists with the start-up of new equipment or system installation and adjusts as needed to ensure the system is operational May plan schedules, lay out basic electrical equipment installations, and assist in the start-up and check-out of new systems installations Presents a professional image both in personal and vehicle appearance. Performs work assignments in a safe manner and within specified cost limits. Promotes, builds, and maintains good customer relations and assists with contract retention. Maintains company propriety and documentation in accordance with established policies; handles proprietary information in the prescribed manner; adheres to and supports Securitas Technology policies and procedures including all safety requirements. Keeps abreast of changes and new developments in products and technology. Attends and completes training programs as requested. Minimum Requirements MUST HOLD a minimum of 1-2 years of experience installing and/or servicing intrusion, access control, and CCTV security systems. High School Diploma or equivalent Vocational/Technical Degree in electrical, security, or computer systems preferred. A thorough knowledge and understanding of intrusion detection systems, electronic access control, CCTV, IP video, Surveillance systems and life safety systems. Lenel, Matrix, DMP certifications preferred. DMP system knowledge preferred. IP Video and IT experience preferred. Climb ladders that extend up to 24 ft. in height. Avigilon, March Networks and AXIS Camera knowledge. Carry items up to 75 pounds. Ability to work on-call on a rotational basis covering after hours & weekend emergency calls. A valid state driver's license, without restrictions, is required. Securitas offers comprehensive benefits including Highly competitive salary Company Vehicle Company Cell Phone Opportunity for annual merit pay increases. Paid company training Medical, Dental, Vision, and Life Insurance Company Paid Short Term and Long-Term Disability 401K with 60% Match up to 6% of salary Paid vacation, holiday, and sick time Educational Assistance Exceptional growth opportunities Wide variety of employee discounts on travel, equipment, and more! We are a nationwide provider of security solutions, and an equal opportunity employer committed to a diverse workforce. Our core values of Integrity, Vigilance and Helpfulness are proudly demonstrated daily by our employees to our customers and the communities we service.

First year potential $40k - $60k based on performance Schedule: M - F (occasional afterhours*) // Hours: start to finish job, so depends on last job completed PLEASE NOTE THAT WE DO A 7-YEAR MOTOR VEHICLE REPORT (MVR) REVIEW. Water Softener experience required - at least 1 year minimum. At ABC Home & Commercial Services, we're more than just a company; we're a family committed to excellence. With 75 years of history and a team of over 1,000+ employees serving a growing network of cities in Central and South Texas, we take pride in being a family-owned business dedicated to fulfilling commitments, serving others, and supporting families. Come be a part of something special - apply now! How You'll Make an Impact: As ABC's Water Softener Service Technician (WQ), you will sell, install, repair, and/or maintain water treatment and filtration systems with professionalism and excellent customer service. Requirements What You'll Bring: Water Softener experience required - at least 1 year minimum. Must hold a valid driver's license with an issue date of at least five years prior to the date of this application. Class I, II, or III Water Treatment license, or the ability to obtain one. Excellent communication & customer service skills. High proficiency with emailing, instant messaging and use of various electronic devices and applications for effective communication/information sharing. Ability to prioritize workload, work under pressure and handle irate customers and still maintain good composure. Dependable and self-motivated with desire to work year-round. Ability to work inside and/or outside for long periods of time, sometimes in extreme temperatures. Must hold a valid driver's license with an issue date of at least five years prior to the date of this application. What We Offer: Comprehensive benefits package including health, dental, vision, and life insurance. 401(k) with company matching. Paid vacation, sick leave, and participation in our Profit-Sharing Plan. Additional compensation opportunities through our Lead Now Program. Company clubs, outings, and paid training and development opportunities. Tuition reimbursement and educational scholarships for employees and family members. Volunteer Engagement Program with approved Volunteer Time Off (VTO). Wellness program including a gym membership and a company vehicle with gas card. What You'll Do: Must know and understand all applicable federal, state, and local codes and be able to apply them in a practical manner on each job. Accurately diagnose the cause of water quality issues; recommend options for repair, installation or replacement of systems to customers; and complete all authorized service repairs. Quote each job by using a flat rate price book in accordance with company policy, collect and deliver payment from customer to the office and complete and submit all required paperwork in a timely and accurate manner. Work with inspectors, suppliers and co-workers to ensure correct project work, while abiding by all codes. Carry out general skills such as: soldering; pipe-threading/gluing/using pro-press tools and fittings; diagnosing mechanical issues with water treatment equipment and repairing; water leak detection and repair; performing basic water quality tests; changing out drinking water filters. Communicate effectively with supervisors, dispatchers, CSRs and customers to ensure complete alignment at all times during the service repair or replacement process. Work with and train any helpers which may be assigned to work with you. Maintain necessary licenses or certifications and complete required continuing education. Maintain a professional attitude at all times with customers, fellow employees and supervisors. Schedule: M - F (occasional afterhours*) // Hours: start to finish job, so depends on last job completed Join Our Team Today: At ABC Home & Commercial Services, we're excited to welcome you to our Team and support your growth as we work together to keep our community comfortable and thriving. What are you waiting for - in 2 weeks you could be behind the wheel of our very spiffy white vans - you know the one with the Anteater on it. ABC is an Equal Opportunity Employer. Please note that if an offer is extended that we do conduct the following pre-employment screenings: Drug Screen, Physical & Physical Performance Evaluation (PPE). ABC participates in the E-Verify (I-9) program and conducts comprehensive criminal background checks, along with a 7-year Motor Vehicle Report (MVR) review. Must hold a valid driver's license with an issue date of at least five years prior to the date of this application. *As an equal opportunity employer, we are committed to respecting the religious beliefs and practices of all individuals. We will consider reasonable accommodation requests from applicants and employees who require adjustments to their work schedules or practices due to sincerely held religious beliefs, provided such accommodations do not create an undue hardship on the company's operations.

Field Services Associate Houston, TX - Onsite Notes: 3 steps interview process (but fast) 1st is virtual with the Manager, 2nd is virtual with the president, 3rd is final on site for about 4 hours. Required Skills and Knowledge • Proven leadership skills • Exceptional attention to detail • Ability to manage multiple projects under strict deadlines • Ability to work well on a team • Exceptional written and verbal skills • Knowledge of and experience with AutoCAD, Revit, Bluebeam, and Microsoft Office Suite • Knowledge of building codes Preferred Skills and Knowledge • Bachelor of Science Degree in Engineering, Construction Science or related field • Previous experience in an MEP construction or consulting environment, for schools • Previous experience in field project management in an MEP consulting environment • Ability to read construction documents, including MEP drawings and specifications • Knowledge of building codes • Knowledge in the construction of power distribution, power and lighting, data networks, telephone and intercom systems, fire alarm systems, security and access control systems, and other standard electrical systems • Knowledge in the construction of HVAC systems, temperature controls, and other standard mechanical systems • Knowledge in the construction of domestic water systems, hot water systems, storm water systems, sanitary waste and vent systems, acid waste systems, fire sprinkler systems, compressed air systems, gas distribution systems and fuel gas systems, and other standard plumbing systems Compensation and Benefits Commensurate with experience Health insurance, 401(k)m, paid holidays and PTO

** HIRING NOW ** Seeking experienced Automotive Mechanics / Automotive Technicians Pay: $27.00 - $45.00 flag rate Sun Auto Tire & Service operates multiple locations across Texas and is expanding! We offer complete quality automotive repair and preventative maintenance. Our ASE certified technicians will be happy to help you on a wide range of services including alignments, brake repair, oil changes, batteries, shocks and struts, belts and hoses, and air conditioning. The Master Technician / Automotive Mechanic ensures that repairs are performed correctly and efficiently by qualified technicians and that the service department maintains a consistently high level of customer satisfaction. They are also responsible for effectively and efficiently diagnosing and repairing customer vehicles while adhering to the MAP guidelines and in accordance with dealership, manufacturers, and Sun Auto Tire & Service standards. Benefits: Competitive Bi-Weekly Pay Tuition Reimbursement Paid Vacation and Sick Time 6 Paid Holidays Medical, Dental and Vision Insurance Life Insurance (Company paid) 401(k) Retirement Savings Plan with Company Match Discounted Services on Personal and Immediate Family Vehicles Opportunity for Advancement!!! Principal Duties and Responsibilities: Diagnoses vehicles according to the appropriate level of certifications/experience. Performs work as outlined on the Multi-point Inspection and/or Repair Order with efficiency and accuracy. Performs complex and heavy-duty repairs. Explains technical diagnosis and needed repairs to non-mechanical individuals which may include the Store Manager, Service Consultants and/or customers. Recommends services that are necessary to keep the customer's vehicle in running condition; properly documents all recommendations in customer file. Follows all safety procedures and reports any concerns to the Shop Foreman or Store Manager. Maintains appropriate ASE certifications and renewals of expiring certifications. Qualifications: Minimum of 5 years of automotive technician / mechanic experience Must be able to demonstrate the ability to properly use computerized equipment for diagnostics. Possess valid/current driver's license Current ASE's preferred Ability to work a minimum of five days, including Saturdays Must be at least 18 years old Working Conditions and Physical Demands: The Master Automotive Technician / Mechanic will be exposed to moderate to loud noises, dust, exhaust fumes, lubricants, petroleum products, vapors, caustic materials and other hazardous and non-hazardous materials. The temperature in the work environment varies and could include extreme heat and/or extreme cold depending on the ambient temperatures outside. The Master Automotive Technician / Mechanic must be able to meet the following physical requirements: Stand five hours per day and able to walk to gain access to various areas of the building Bend, stoop, kneel and crouch regularly up to 10 hours per day; must have full range of motion with arms and hands and be able to feel, handle or finger objects frequently Lift and/or move up to 10 pounds regularly, lift and/or move up to 50 pounds frequently. Hear and speak Vision sufficient to detect color, depth, and re-focus Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sun Auto Tire & Service provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Founded in 1985, ATS is a company with a presence in the United States, Mexico and the United Kingdom. We are professionals in Industrial Maintenance and we make factories run better. Fundada en 1985, ATS es una empresa con presencia en los Estados Unidos, México y el Reino Unido. Somos profesionales en mantenimiento industrial y hacemos que las fábricas funcionen mejor. Principal Duties/Responsibilities: · Performs competent break-fix & preventative maintenance. This includes but is not limited to: observing devises in operation to determine root cause of problem; dismantling devices to gain access to and remove defective parts; adjustment of functional parts of devices and control instruments; repair and/or replacement of defective parts; and performing troubleshooting and repair of electrical circuitry and mechanical systems. · Identifies parts, supplies and repair items as necessary for equipment maintenance and repair. · With minimal instruction, performs maintenance as per industry standards. · Works with customer counterparts to execute maintenance, reliability, and preventative maintenance procedures. · May be required to setup and operate multiple machining operations including but not limited to: lathe, drill press, grinder, and other metalworking tools to make and repair parts. May perform welding tasks. · Conforms and complies with customer contractor codes of conduct, housekeeping standards, and safety processes · Documents work performed in service reports, and applicable management systems. · Performs routine processes with and within industrial control systems to troubleshoots and analyzes complex equipment, perform equipment maintenance, and to resolve equipment problems. · Utilizes in-depth application of electrical, mechanical, and fluid power aptitude to troubleshoot and repair equipment. · Completes and conducts on-the-job training and technical self-study programs for career development. · Follows all safety related policies, rules, regulations, technical instructions and guidelines. Situational awareness and identify unsafe behaviors and conditions. Knowledge, Skills, Abilities (KSAs), & Competencies: Essential KSAs: · High School Graduate or equivalent (GED). · Associates degree with a Technical focus and 5 years of related experience in specific industry; or, 7 years of experience in specific industry. · Must be able to use basic hand tools and specialized tools as appropriate. · Possesses working knowledge and experience regarding electrical, mechanical, and fluid power systems in related fields. Can analyze the problems, synthesize alternative solutions, and perform repairs · Extensive travel required. (Local, National, International). Desirable KSAs: · Experience in preventative maintenance techniques, precision measuring, mechanical alignments, and general maintenance of applicable process equipment. · Exposure to programmable logic controllers, field devices, and electrical drive and motor systems. Competencies: · Communications · Customer Focus · Personal Discipline · Safety Physical Demands and Working Conditions: While performing the duties of this job, the employee is regularly required to stand; walk; use hands/fingers to handle, or feel; reach with hands and arms; climb, ascend/descend or balance to heights that may require a ladder or lift; stoop, kneel, crouch, or crawl in confined spaces; and talk or hear. The employee is occasionally required to sit. The employee must occasionally lift and/or move more than 50 pounds. The employee is regularly required to use close vision and color vision. The employee is occasionally exposed to outside weather conditions and risk of electrical shock. Work is typically performed in a factory environment and is usually very loud. In the factory environment, the employee may be exposed to hazardous materials and/or greasy or slippery ATS is committed to providing equal employment opportunities in all aspects of employment to all applicants and employees without regard to age, color, race, religion, sex (including pregnancy, gender identity, and sexual orientation), national origin, disability, veteran status, genetic information, or other legally protected status. Review the privacy policy here. ATS se compromete a brindar igualdad de oportunidades de empleo en todos los aspectos del empleo a todos los solicitantes y empleados, independientemente de su edad, color, raza, religión, sexo (incluido el embarazo, identidad de género y orientación sexual), origen nacional, discapacidad, estatus de veterano, información genética u otro estatus legalmente protegido. Revisión de la política de privacidad aquí here.

At Oleon, we bring you natural chemistry. Ambitious, with both feet on the ground. That's who we are and that's how we will continue to grow. Our specialty lies in converting natural fats and oils into a wide range of oleochemical products. We offer them in a large variety of markets such as: cosmetics, nutrition, crop protection, industrial ingredients, lubricants, oilfield, coatings, detergents, and many more. Oleon has over 1,500 employees worldwide in 9 different countries. Enthusiastic people who are completely in their element here at Oleon are more than welcome to join our team! We are looking for a Millwright for our Conroe, Texas plant. Some of your main duties & responsibilities: Maintain equipment for the blending, bottling, warehousing and ongoing construction of a chemical esterification plant with a startup of 2026. Inspect, service, repair, and conduct predefined preventative maintenance for various plant equipment, including pumps, compressors, air dryers, valves, and rotating machinery. Assist with the installation and maintenance of various types of bearings, mechanical seals, and other sealing components. Service storage tanks, vessels, cooling towers, steam heating systems, and high-pressure systems, ensuring they are functioning properly and safety compliant. Apply machining and welding techniques to fabricate, modify, and repair parts as needed. Navigate SAP maintenance workflows for work orders, notifications, and documentation. Provide technical support during HSE audits and ensure proper documentation of all required maintenance paperwork. Independently troubleshoot mechanical issues and develop practical solutions with minimal supervision. Follow all safety procedures and protocols; actively contribute to a safety-first culture throughout the company. Who are we looking for? You'll succeed if: Required Qualifications: Minimum 3 years of experience in industrial maintenance within a chemical, petrochemical, or process manufacturing environment. Hands-on experience with bottling lines or similar high-speed automated production systems. Ability to read and interpret technical drawings, equipment manuals, and schematics Strong knowledge of OSHA and other relevant safety standards. Excellent troubleshooting skills and the ability to work in high-pressure environments to resolve issues quickly. Strong communication and collaboration skills, with the ability to work cross-functionally with production, maintenance, and engineering teams. Physically able to lift 50 lbs., climb ladders, and work in varied environments. Preferred Qualifications: Associate degree in Industrial Maintenance or High School Diploma and a combination of relevant work experience. Experience in chemical manufacturing environment. Familiarity with automation and process control systems specific to bottling and packaging operations. Understanding of basic welding principles. What we offer you Your benefits: You will join a company with ambitious goals and a welcoming atmosphere. Both your personal development and work-life balance are equally important to us. You can expect an attractive salary and leave scheme

Field Service Automation Engineer is responsible for providing top level service to Powell customers that will ensure repeat business and total customer satisfaction in the Automation space! He or she will be responsible for executing testing and commissioning of Automation solutions for large and complicated projects. He or she would be expected to secure new business opportunities and gather information on customer future plan for return business and sales opportunities, grow project scope. Estimating knowledge for both Automation equipment and services. Essential Responsibilities Adhere to Powell's current safety and quality standards. Manage on-site project team in completing all site documentation in a timely manner; including but not limited to, weekly time sheets, signed service and repair order, materials used, services provided, and report writing. Review project scope of work and material for each project. Provide regular and clear communication regarding work schedules to internal and external customers. Maintain flexible work hours, which will include over time and weekend support. Comply with Powell‘s standard operating procedures, documentation processes, safety processes and protocols. Coordinate with Powell Project management, customers, vendors, and labor support in a professional and customer-centric manner. Able to work in different roles of individual support to working with small crews. Able to provide Automation solutions to customers in support of sales. Manage safety requirements for assigned projects. Review test reports from projects for accuracy and provide recommendations to customers from deficiencies on test reports as a deliverable. Demonstrate ability to manage tasks, commitments, and deadlines as it pertains to assigned tasks, communications with customers, and internal customers. Participate in and develop documentation for onsite testing, as well as perform start up and commissioning activities as required. Common projects include: Protection relay testing and commissioning SCADA system testing and commissioning PLC based system testing and commissioning Troubleshooting logic and making necessary corrections to automation product solutions Minimum Qualifications Bachelor's degree in electrical engineering, as well as 5+ years as an electrical field service engineer in Automation. Knowledge in common industrial communication protocols such as Modbus TCP/IP, IEC61850, and DNP 3.0. Knowledge in SCADA systems using WonderWare InTouch, Allen Bradley Factory Talk, Copa-Data Zenon, Siemens WinCC, and/or SEL RTAC HMI Knowledge of configuration files using various manufactures such as SEL, GE, Siemens and Beckwith. Exhibit working knowledge of advanced electrical industry manufacturing standards & electrical systems, working knowledge of both factory testing standards and NETA MTS & ATS standards. Specific standards include sections of ANSI IEEE C37 applicable to the design and manufacture of breakers and switchgear. Specific knowledge of the following: ANSI IEEE device function numbers; ampacities of electrical conductors in switchgear applications; electrical air and surface creepage clearance requirements. Demonstrate knowledge of basic electrical theory and control circuits i.e.: Ohm's Law; Advanced AC and DC theory; contactor and circuit breaker schematics. Demonstrate knowledge of basic distribution protective relay testing, hi-pot testing, and breaker function testing. i.e.: testing of over-current and motor protection relays with current injection. Skilled in the art of writing accurate and complete test reports, project summaries and has the ability to explain most of the system anomalies found on a given project. The Field Service Automation Engineer will also be expected to demonstrate proficiency with computer skills using Oracle, MS Outlook, Power DB, Word & Excel. Skills, Abilities & Other Requirements Working knowledge with using the following test equipment: Multi-meter and relay test set. Must demonstrate working knowledge with the use of various hand tools and mechanical adaptability. Must have accelerated verbal and written communication skills. Proficiency in problem solving. Willing to attend in-house and out-side training. Willing to travel up to 70% of the year. Demonstrate ability to read and interpret plan sets and one-line diagrams. Communicate to customers about project execution plans. Working & Environmental Conditions Working Conditions The Field Service Engineer will perform duties in an industrial environment. This position requires services both locally and across the Continental US, some international may be required. It is the policy of Powell Service Division to promote safe working conditions for ALL employees, to make available where necessary special equipment to protect employees against specific hazards, to reduce accidents through prevention programs and to establish rules that are designed for the safety of all. It is the responsibility of each employee to adhere to this policy, as well as to observe all safety practices and exercise every precaution for the safety of accidents.

Pay: $80-120k (Performance Pay Based) Earning potential over $100K/year based on performance Schedule: FT-Weekend Availibilty Full-time, year-round work Join ARS, the nation's largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience. What We Offer: Insurance available after 31 days Low-cost medical (as low as $5/week) Dental, vision, HSA/FSA 401(k) with company match 13 days PTO + 8 paid holidays Company-paid life insurance Take-home vehicle + gas card Uniforms + cleaning service Weekly direct deposit Responsibilities: Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications: What You Need: 3 years of residential HVAC Service experience is required. EPA certification (or ability to obtain) Valid driver's license & clean driving record Must pass background and drug screening Ability to enter attics, crawlspaces, and lifting heavy equipment If you have the experience we seek, APPLY NOW Note: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Customer Service Technician We are an extremely well established and reputable company that has been on the forefront of foundation construction equipment and are known for delivering an industry leading solution that raises the bar of heavy machinery equipment! This is an opportunity to get in with a great company that is providing a ton of growth opportunities, career advancement & strong compensation. Position Overview The Service Technician is responsible for providing high-quality technical support and service to customers, ensuring that equipment is functioning efficiently and safely. This role involves diagnosing issues, performing repairs, and maintaining various systems to enhance customer satisfaction and operational performance. Key Responsibilities Diagnose and troubleshoot electrical and mechanical issues in equipment. Perform preventive maintenance on machinery to ensure optimal performance. Repair and replace faulty components and parts in a timely manner. Calibrate equipment to meet safety regulations and operational standards. Provide excellent customer service by effectively communicating with clients and addressing their needs. Utilize technical manuals to understand equipment specifications and procedures. Operate heavy equipment safely and efficiently during service tasks. Conduct welding and engine repair as necessary to resolve issues. Maintain accurate records of service performed and parts used. Train customers on proper equipment usage and maintenance to enhance longevity. Qualifications High school diploma or equivalent; technical certification preferred. Proven experience in electrical systems and mechanical repair. Strong troubleshooting skills with a focus on diagnostics. Experience in preventive maintenance and parts replacement. Familiarity with heavy equipment operation and safety regulations. Email Your Resume In Word To Looking forward to receiving your resume through our website and going over the position with you. Clicking apply is the best way to apply, but you may also: keith.ellis@cybercoders.com Please do NOT change the email subject line in any way. You must keep the JobID: linkedin : KE2-1856315 -- in the email subject line for your application to be considered.*** Keith Ellis - Director of Recruiting For this position, you must be currently authorized to work in the United States without the need for sponsorship for a non-immigrant visa. This job was first posted by CyberCoders on 06/11/2025 and applications will be accepted on an ongoing basis until the position is filled or closed. CyberCoders is proud to be an Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, sexual orientation, gender identity or expression, national origin, ancestry, citizenship, genetic information, registered domestic partner status, marital status, status as a crime victim, disability, protected veteran status, or any other characteristic protected by law. CyberCoders will consider qualified applicants with criminal histories in a manner consistent with the requirements of applicable state and local law, including but not limited to the Los Angeles County Fair Chance Ordinance, the San Francisco Fair Chance Ordinance, and the California Fair Chance Act. CyberCoders is committed to working with and providing reasonable accommodation to individuals with physical and mental disabilities. Individuals needing special assistance or an accommodation while seeking employment can contact a member of our Human Resources team at Benefits@CyberCoders.com to make arrangements.

Ready to take your EEG skills on the road? Join SynapseTBI, a fast-growing neurodiagnostics team, and bring life-changing testing to patients across the country. We're looking for a motivated Ambulatory EEG Technologist who loves patient care, enjoys flexibility, and is excited about a career that blends healthcare with travel. Company Description SynapseTBI offers a comprehensive protocol of objective diagnostic testing for the diagnosis of Traumatic Brain Injuries (TBI), Mild Traumatic Brain Injuries (mTBI), and Post Concussion Syndrome. Recommended and validated by the American College of Occupational and Environmental Medicine (ACOEM) for "Post TBI Patients who either have symptoms of cognitive deficits and/or have sustained a TBI sufficient to cause same", our services also include neurologist consultations, recommended treatment plans, psych evaluations, in-home TBI treatment programs including Neurofeedback, and life care plans. Role Description This is a travel role for an ERP/EEG Technician, primarily covering the Midwest Regions, preferably based in Texas. The EEG Technician will be responsible for performing Neurodiagnostic Testing, assisting with epilepsy and neurophysiology studies, ensuring patient care, and working closely with medical professionals to conduct diagnostic tests, assessments and treatments. What You'll Do: ✨ Travel to patient homes, clinics, and partner sites to set up and remove ambulatory EEG studies and/or run ERP testing along with other TBI diagnostic studies ✨ Apply electrodes and ensure clean, accurate data collection ✨ Teach patients and families how the test works and answer their questions with confidence ✨ Keep equipment in top shape and maintain detailed study records ✨ Represent our company with professionalism, compassion, and a patient-first mindset What We're Looking For: ✔️ EEG experience preferred, but not required (we will teach the testing for the right candidate) ✔️ Someone that works well on their own and doesn't require a micro-manager ✔️ Credentialed techs (R. EEG T.) a plus - but not required ✔️ Someone flexible, detail-oriented, and ready to travel ✔️ Strong communication skills and a passion for helping patients ✔️ A valid driver's license and reliable transportation required Why You'll Love It Here: 🌎 Travel nationwide with all lodging and travel expenses covered 💰 Competitive salary + a comprehensive bonus plan 🩺 Full benefits (health, dental, vision, PTO) 📈 Ongoing training and career growth opportunities 💡 Work with a supportive team that values your expertise If you're looking for a career that takes you beyond the walls of a hospital and gives you the chance to explore new places while making a difference in patients' lives-this is it.

Heat Treatment Technicians are responsible for conducting a process where metal and alloy materials are treated using heat to alter their physical, and sometimes chemical, properties. This process makes the material more desirable or useful for specific applications. Their duties and responsibilities include: Setting up and operating heat treatment equipment based on job specifications Monitoring machines to ensure they maintain the correct conditions during the heat treatment process Performing inspections to evaluate the physical properties of materials after heat treatment Conducting routine maintenance and troubleshooting on heat treatment machinery and equipment Working with engineers and other technicians to develop and implement heat treatment plans Ensuring compliance with safety procedures and regulations during all heat treatment operations Interpreting and adhering to blueprints, technical drawings, and plans Documenting and reporting on the process and results of heat treatment procedures Inspecting finished products to ensure they meet quality standards and specifications Calibrating and maintaining heat treatment equipment to ensure it operates at optimal levels Job Type: Contract Work Location: On the road BE SURE TO APPLY ON OUR WEBSITE: ****************

Job Title: Automotive Technician / Mechanic We are looking for technicians / mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what's right for our guests. Responsibilities include, but are not limited to: Technicians use their knowledge & skills to diagnose and fix vehicles for our guest Continuously build experience as an automotive mechanic across a wide range of domestic and foreign vehicles Complete full, accurate, and honest courtesy vehicle inspections Work as part of a team to troubleshoot guest concerns quickly and effectively Follow and promote our high standards of safety, cleanliness, and organization Work closely with the service department and effectively communicate concerns Work together with other technicians to solve problems, meet deadlines, and deliver distinguished results Qualifications Qualifications: Positive attitude and a desire to serve guest 3+ years of experience as an automotive technician/mechanic ASE Certifications preferred, or a plan to achieve Capable of diagnosing and repairing all makes/models of vehicles Meet or exceed hourly goals Aptitude for learning additional skills and processes Professional appearance and strong communication A desire for long-term career development Physical Requirements: Occasionally lift and/or move over 100 pounds Be able to work with tools on vehicles lifted above their head Work in tight spaces as dictated by the vehicle's needed repair Have the needed dexterity in order to efficiently use hand tools Walk/stand for the majority of their workday Drive manual transmissions vehicles Efficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support and access to our private Technician Assistance Center. Thank you for viewing this opportunity! This job posting is for an opening at a Christian Brothers Automotive location that is independently owned and operated by a local licensed franchisee. Your application and any information included with it will be submitted to the franchisee for further handling. Christian Brothers Automotive Corporation ("CBAC") is a separate business entity. No CBAC employee will be involved in any decisions regarding your employment application. If you are hired for this position, you also understand and acknowledge that the local franchisee will be your employer and that CBAC will not be your employer. The local franchisee is solely responsible for all decisions related to your employment, including hiring, firing, discipline, compensation, scheduling and supervision. All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices. PandoLogic. Category:Automotive, Keywords:Automotive Technician, Location:New Caney, TX-77357

Do you have the following skills, experience and drive to succeed in this role Find out below. Accurately evaluates specimen orders and enter clinical data/information into a variety of computer systems (i.e. order entry, patient demographics and/or results). Identifies any missing or invalid data entry information and take the appropriate action to correct. Operates automated and semi-automated equipment according to standard operating procedures. Effectively communicate supply deficiencies to appropriate personnel, including deficiencies related to specimens, paperwork, database information, and equipment. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Accurately document information as required, including processing logs, quality control, and labeling of reagents. Cleans, sanitizes, and maintains laboratory equipment and glassware. Maintains and distributes laboratory supplies. Packages laboratory biohazard waste for disposal following established standards and practices. Maintains laboratory coat supply Orders, receives, stocks, ships and tracks laboratory equipment and supplies. Ensuring all equipment is functioning correctly or scheduling equipment repair or replacement. Tracks equipment calibrations and preventative maintenance. Maintains inventory of all consumables and reagents. Assists in arranging the disposal of biohazard and chemical waste. Assists with the enforcement of all laboratory policies and procedures. Assists in enforcing safety around PPEs (personal protective equipment's) Follows established protocols for safety, infection control, security, compliance, and the use of hazardous materials. xevrcyc Job Requirements: Education/Skills Associate of Science Degree preferred Basic knowledge in the areas of microbiology, immunology or molecular biology and biochemistry as related to infectious diseases required Experience 1 year of experience in a clinical laboratory setting or length of time to complete certification program preferred Licenses, Registrations, or Certifications Medical Laboratory Assistant Certification or Phlebotomist Certification - PBT (ASCP), RPT (AMT), CPT (NPA) or equivalent required Louisiana requires State Licensure In accordance with the CHRISTUS Health License, Certification and Registration Verification Policy, all Associates are required to obtain the required certifications for their respective positions within the designated time frame. Work Schedule: MULTIPLE SHIFTS AVAILABLE Work Type: Full Time

Perform complete In-Line over-haul of all types and manufacturers of valves ranging from gate, globe, check, ball, butterfly, pressure seal, and plug valves in addition to Control valves and actuators. Essential Job Functions * Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. * Performs all duties as assigned and adheres to TEAM's Core Values. * Perform control valve repair in accordance to TEAM's quality procedures. * Directly communicate with customers. * Work autonomously in valve repair process. * Ensure all diagnostic, testing, and repair reports are in compliance with quality system. Job Qualifications * Education preferred: high school diploma or GED equivalent. * Minimum 3- 5 years of experience. * Control Valve Manufacturers Training Courses and/or certifications preferred. * Knowledge of HART Communicator or other diagnostic analyzer manufacturer required. * 0 to 30% minimum travel requirement. Work Conditions * Position is based out of a branch or site location. * Field duties require indoor and outdoor work in a plant atmosphere. * Interaction with other crew employees, as well as supervisors and client personnel. * Working in plant and/or shop areas around production machinery with extreme noise levels. * Must be able to wear safety equipment as required by the safety department for personal protection. * May be at more than one job site in a day and must be able to tolerate climate changes. * May be required to travel out of town on a periodic basis Physical and Mental Requirements * Ability to lift and carry 75 pounds. * Must be able to walk and climb except when performing non-field duties. * Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively * Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations. * Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties. * Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. * Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. * Ability to maintain focus and multitask effectively. * Excellent communication skills. TEAM provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Pay: $80-120k (Performance Pay Based) Earning potential over $100K/year based on performance Schedule: FT-Weekend Availibilty Full-time, year-round work Join ARS, the nation's largest provider of residential HVAC, plumbing, and electrical services with 7,000+ team members and over 45 years of experience. What We Offer: Insurance available after 31 days Low-cost medical (as low as $5/week) Dental, vision, HSA/FSA 401(k) with company match 13 days PTO + 8 paid holidays Company-paid life insurance Take-home vehicle + gas card Uniforms + cleaning service Weekly direct deposit Responsibilities: Troubleshoot, service, and repair residential HVAC systems with the support of full training, professional tools, and a strong leadership network. Qualifications: What You Need: 5 years of residential HVAC Service experience is required. EPA certification (or ability to obtain) Valid driver's license & clean driving record Must pass background and drug screening Ability to enter attics, crawlspaces, and lifting heavy equipment If you have the experience we seek, APPLY NOW Note: This posting outlines potential pay ranges and opportunities, which are not guaranteed and do not represent a formal offer. Additional compensation may be offered based on experience and will be outlined in an offer letter addendum. ARS is an equal opportunity employer and does not discriminate based on race, color, religion, sex, national origin, age, disability, or any other protected status under applicable federal, state, or local laws. Privacy policy available upon request.

Apply now, read the job details by scrolling down Double check you have the necessary skills before sending an application. Performs all lab assistant procedures (including, but not limited to, phlebotomy, client processing, and client services representative functions) and oversees such staff under the guidelines and supervision of the assigned Leader to assure appropriate patient care is met. Responsible for monitoring, rotating stock, or requesting general laboratory and phlebotomy supplies as needed. Assists in specimen processing/handling, collection, and designated testing functions in all areas of the lab. Responsibilities: Meets expectations of the applicable OneCHRISTUS Competencies: Leader of Self, Leader of Others, or Leader of Leaders. Customer Service / AIDET / Standards of Behavior. Trains and performs competency checklist with all Phlebotomist/ laboratory assistant staff. Monitors the collection report; resolves problems; completes related paperwork and computer functions. Uses centrifuge, prepares and assures serum/blood specimens are acceptable; prepares specimen for referral to outside reference laboratories; dispenses blood products under supervision of medical technologist. Monitoring the collection area continuously during the shift to assure that all specimens are collected within a timely manner and assisting the phlebotomists in obtaining specimens, if necessary. Handling inquiries, questions and problems as they arise, both within the laboratory and between the lab and other departments in the hospital, maintaining a professional image and exhibiting excellent service. Greets all customers, clients, outpatients, and visitors physically or on the telephone; provides accurate, appropriate, and courteous response to technical questions and results inquiry as requested by physicians and nursing personnel. Communicating follow-up information regarding patient care issues or physician related complaints to the appropriate supervisor, manager, charge tech or director. Performs clerical office duties, client processing, and client service representative duties, as assigned/required. Enters orders and cancellations using Hospital LIS. Receives and processes specimens collected and/or add-on tests and distributes them to the appropriate departments. Processes and maintains laboratory records and reports; monitors chart print rounds for completion and processes reports for Health Information, faxes or mails reports as requested by physicians or clients, processes reference reports, resolves all pending transactions, and maintains printers, copier, and fax machine. Specimen collections are initiated within the appropriate response time. Monitors the collections pending. Reports and resolves problems, completes related paperwork and computer functions. Works as a team member to perform and complete all patient related testing/reporting regardless of individual assignments, to provide timely results on a daily basis. Completes tasks or special projects within the time frame, allowed per any guidelines established as assigned by laboratory supervisory personnel. Inventory control - monitors supply receiving area, distributes supplies, restocks, and processes packing slips; notifies appropriate supervisor/manager when instrument parts, reagents, or supplies are at reorder levels; dates reagents when received and opened according to laboratory policy, and notifies supervisor of expired reagents; completes supply orders, as assigned. Practices safety, infection control, and security as defined by the hospital department and section policy and procedure manuals; follows all safety and infection control procedures including wearing appropriate PPE for assigned job functions; disposes of biohazardous materials and hazardous chemicals as established by departmental policy; all patient information, including lab results, are maintained in the strictest of confidence, limited to health care professionals needing this information to perform patient care. Demonstrates work schedule flexibility by willingly rotating shifts and changing assignments, as required. Job Requirements: Education/Skills Associate of Science Degree preferred. Basic knowledge in the areas of microbiology, immunology or molecular biology and biochemistry as related to infectious diseases required. Experience 2 years of experience as a Phlebotomist or Laboratory Assistant in a clinical laboratory setting required 5+ years of experience preferred. Licenses, Registrations, or Certifications Medical Laboratory Assistant Certification or Phlebotomist Certification - PBT (ASCP), RPT (AMT), CPT (NPA) or equivalent required. xevrcyc Louisiana requires State Licensure. Work Schedule: 7PM - 7AM Work Type: Full Time

Job Title: Automotive Technician / Mechanic We are looking for technicians/mechanics who are energetic, upbeat, and have a positive attitude. The technicians we are looking for have to seek out solutions to tough problems with a strong passion for doing what's right for our guest. Responsibilities include, but are not limited to: Technicians use their knowledge & skills to diagnose and fix vehicles for our guest Continuously build experience as an automotive mechanic across a wide range of domestic and foreign vehicles Complete full, accurate, and honest courtesy vehicle inspections Work as part of a team to troubleshoot customer concerns quickly and effectively Follow and promote our high standards of safety, cleanliness, and organization Work closely with the service department and effectively communicate customer concerns Work together with other Technicians to solve problems, meet deadlines, and deliver distinguished results Qualifications Qualifications: Positive attitude and a desire to serve guest 3+ years of experience as an automotive technician/mechanic ASE Certifications preferred, or a plan to achieve Capable of diagnosing and repairing all makes/models of vehicles Meet or exceed hourly goals Aptitude for learning additional skills and processes Professional appearance and strong communication A desire for long-term career development Physical Requirements: Occasionally lift and/or move over 100 pounds Be able to work with tools on vehicles lifted above their head Work in tight spaces as dictated by the vehicle's needed repair Have the needed dexterity in order to efficiently use hand tools Walk/stand for the majority of their workday Drive manual transmissions vehicles Efficiently navigate a computer Additional Information Christian Brothers Automotive (CBA) began in 1982 with the simple premise of providing precision auto repair with transparency, integrity and a philosophy of people first. All 300+ CBA locations offer a modern facility equipped with manufacture-level diagnostic equipment and the latest factory scan tools. CBA shops also offer their technicians a consistent workload, free training, full-time live technician support, and access to our private Technician Assistance Center. Thank you for viewing this opportunity! This job posting is for an opening at a Christian Brothers Automotive location that is independently owned and operated by a local licensed franchisee. Your application and any information included with it will be submitted to the franchisee for further handling. Christian Brothers Automotive Corporation ("CBAC") is a separate business entity. No CBAC employee will be involved in any decisions regarding your employment application. If you are hired for this position, you also understand and acknowledge that the local franchisee will be your employer and that CBAC will not be your employer. The local franchisee is solely responsible for all decisions related to your employment, including hiring, firing, discipline, compensation, scheduling and supervision. All of your information will be kept confidential according to EEO guidelines. Christian Brothers Automotive is an Equal Opportunity Employer. Christian Brothers Automotive locations practice "At-will" employment practices. PandoLogic. Category:Automotive, Keywords:Automotive Technician, Location:Cleveland, TX-77327

Taurus Industrial Group's Specialty Services division is seeking skilled and motivated Field Services Technicians to join our growing team. We provide advanced industrial solutions across power generation, petrochemical, refining, and manufacturing sectors. Our technicians are trusted partners to our clients, delivering precision work in bolting, torquing, machining, induction heating, line-stop, and related specialty field services. If you are a hands-on professional with technical acumen, a safety-first mindset, and the ability to thrive in challenging field environments, we want to hear from you. Key Responsibilities Perform on-site bolting, torquing, tensioning, and induction heating services on critical equipment. Support field machining, hot tapping, and line-stop operations as needed. Install, operate, troubleshoot, and maintain specialized tools and OEM induction equipment. Ensure all work adheres to safety, quality, and compliance standards. Interpret technical drawings, job packages, and client specifications. Collaborate with project managers, supervisors, and customer representatives to ensure timely, accurate, and efficient service delivery. Maintain, calibrate, and prepare rental and company-owned specialty equipment. Travel extensively to client facilities across regional and national assignments. Recommended Qualifications & Requirements Experience: Minimum 3-5 years in industrial services, mechanical maintenance, or specialty field service roles (power plants, refineries, petrochemical, or heavy industry preferred). Certifications/Training: NCCER, OSHA, or equivalent field qualifications (preferred). OEM training on induction heating or bolting/tensioning equipment (a plus). Technical Skills: Proficient in hydraulic, pneumatic, and electronic tool operation. Familiarity with torque/tension charts, machining tolerances, and mechanical fit-up. Physical Requirements: Ability to lift to 50 lbs, work at heights, and endure confined space conditions. Willingness to work extended shifts, nights, weekends, and travel on short notice. Soft Skills: Strong commitment to safety and quality. Clear communication and problem-solving skills. Team-oriented with the ability to adapt to dynamic field environments. Why Join Taurus Industrial Group? Competitive pay with overtime opportunities. Comprehensive benefits: health, dental, vision, 401(k), PTO. Professional training and advancement opportunities. Exposure to cutting-edge specialty service technologies and OEM equipment. Be part of a growing, innovative company that values technical excellence and field expertise. 📍 Locations: Nationwide travel, with primary needs in Texas, Gulf Coast, Northeast, Midwest, and Western U.S. BE SURE TO APPLY ON OUR WEBSITE: ****************

Perform complete over-haul and testing of all manufacturers control valves, actuators and positioners to include: Fisher, Masoneilan, Rotork, Automax, and others. Execute diagnostics and trouble-shooting in shop and field environments. Directly reports to the Operations Manager. Essential Job Functions Maintains a safe, secure and healthy environment by adhering to Company/Customer safety standards and practices and to legal regulations, alerting others regarding potential hazards or concern. Performs all duties as assigned and adheres to TEAM's Core Values. Perform control valve repair in accordance to TEAM's quality procedures. Directly communicate with customers. Work autonomously in valve repair process. Ensure all diagnostic, testing, and repair reports are in compliance with quality system. Job Qualifications Education preferred: high school diploma or GED equivalent. Minimum 3- 5 years of experience. Control Valve Manufacturers Training Courses and/or certifications preferred. Knowledge of HART Communicator or other diagnostic analyzer manufacturer required. 0 to 30% minimum travel requirement. Work Conditions Position is based out of a branch or site location. Field duties require indoor and outdoor work in a plant atmosphere. Interaction with other crew employees, as well as supervisors and client personnel. Working in plant and/or shop areas around production machinery with extreme noise levels. Must be able to wear safety equipment as required by the safety department for personal protection. May be at more than one job site in a day and must be able to tolerate climate changes. May be required to travel out of town on a periodic basis Physical and Mental Requirements Ability to lift and carry 75 pounds. Must be able to walk and climb except when performing non-field duties. Sufficient clarity of speech and hearing or other communication capabilities, with or without reasonable accommodation, which permits employee to communicate effectively Sufficient vision or other powers of observation, with or without reasonable accommodations, which permits employee to investigations. Sufficient manual dexterity with or without reasonable accommodation, which permit the employee to perform routine office duties. Sufficient personal mobility and physical reflexes, with or without reasonable accommodations to perform office duties and travel when necessary to off-site locations. Sufficient personal mobility to maneuver within a refinery or plant environment to include the ability to gain access to elevated platforms via ladders and stairwells. Ability to maintain focus and multitask effectively. Excellent communication skills. TEAM provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.