Service technician jobs in Ocoee, FL

We Don't Cheat at Solitaire! If you're looking for a company that values doing the right thing and putting people & safety first, this may be the company for you! Satellite Shelters, Inc., a leader in the mobile modular industry, has a great opportunity for a Yard Technician to join our team in our Orlando, FL, branch ( This branch is due to move to a new location in Apopka in early 2026) . The right person is a highly organized and safety-oriented individual who is a problem-solver and a HIGHLY effective communicator. Experience in the construction or mobile office industries is preferred. Position Summary: This position is responsible for the construction and repair of units in compliance with Satellite Shelter's policies and procedures and according to specifications aligned by Operations Manager. Essential Duties and Responsibilities: Yard organization and cleanliness Mobile office material inventory management Organize, maintain, load & unload furniture (Satellite Specialty Products) Remove and replace lighting, plumbing and electrical Perform moderate carpentry work/repair. Interface with customers at job sites Perform other duties as assigned. Supervisory Responsibilities: No formal supervisory role. Required Skills: Must be a Self-Starter; has the ability to work independently & take initiative Problem-solver Forklift experience Utility trailer experience Entry level to intermediate level construction experience required Moderate carpentry and electrical experience. Organized HVAC experience preferred but not required. Physical/Mental Demands: Wears personal protective equipment as required Demonstrated ability to perform rigorous outside and indoor duties including walking, standing, climbing, stooping, squatting, bending, twisting, kneeling, reaching, sitting, lifting, grasping, pushing, pulling, manual dexterity, etc. Ability to lift a minimum of 50 pounds. Good fine motor skills, coordination, range of motion and grip strength Ability to work in all climate conditions. Ability to be exposed to loud noise levels. Ability to operate hand and power tools Ability to work in an environment containing dirt, grease, and dust. Ability to work safely around heavy machinery and heavy equipment. Ability to hold air impact tools up to 30lb. Compensation: The pay range listed is the base pay range that Satellite Shelters, inc/Satellite Industries, Inc. reasonably expects to pay someone for this position (compensation may vary outside of this range depending on several factors, including but not limited to, a candidate's qualifications, skills, competencies, experience, location and end client requirements). Benefits and Ancillaries: Medical, dental, vision, PTO benefits and ancillaries may be available for eligible employees and vary based on the plan options selected by the employee. PM25

By clicking the “Apply” button, I understand that my employment application process with Takeda will commence and that the information I provide in my application will be processed in line with Takeda's Privacy Notice and Terms of Use. I further attest that all information I submit in my employment application is true to the best of my knowledge. Job Description Please take this virtual tour to get a sneak peek of one of our Plasma Donation Centers. About the role: Every day, the donors you meet will motivate you. The high-quality plasma you collect will become life-changing medicines. Here, a commitment to customer service and quality is expected. You will report to the Plasma Center Manager and will perform as a plasma donor screener and perform phlebotomy to support plasma center operations. How you will contribute: · You will answer phones, and greet and focus on our donors, while ensuring the safety of donors and our team. · You will screen new and repeat donors and take and record donor vital signs and finger stick results. · You will use our Donor Information System, prepare donor charts, maintain accurate records, and coordinate donor compensation. · You will help identify operational opportunities for continuous improvement and initiate changes to center processes using company approved procedures. · You will be there for our donors, which includes working a variety of shifts, Saturdays and Sundays, and holidays. What you bring to Takeda: · High school diploma or equivalent · Ability to walk and/or stand for the entire work shift · Will work evenings, weekends, and holidays · Ability to lean, bend, stoop, crouch, and reach above shoulders and below knees · Ability to lift to 5 lbs., and occasional lifting of materials up to 32 lbs. and rarely 50 lbs. · Fine motor coordination, depth perception, and ability to hear equipment from a distance · Because of potential exposure to bloodborne pathogens (risk level 1), 90% of work tasks require prolonged glove wear · 1 or more years minimum experience working in a customer or patient facing role is helpful What Takeda can offer you: Every day at Takeda, we feel good knowing that what we do helps improve the lives of patients with rare diseases. At BioLife, while you focus on our donors, we will support you. We offer a purpose you can believe in, a team you can count on, opportunities for career growth, and a comprehensive benefits program to include retirement benefits, medical/dental, family leave, disability insurance and more, all in a fast-paced, friendly environment. More about us: At Takeda, we are transforming patient care through the development of novel specialty pharmaceuticals and best in class patient support programs. Takeda is a patient-focused company that will inspire and empower you to grow through life-changing work. Certified as a Global Top Employer, Takeda offers stimulating careers, encourages innovation, and strives for excellence in everything we do. We foster an inclusive, collaborative workplace, in which our teams are united by an unwavering commitment to provide Better Health and a Brighter Future to people around the world. BioLife Compensation and Benefits Summary We understand compensation is an important factor as you consider the next step in your career. We are committed to equitable pay for all employees, and we strive to be more transparent with our pay practices. For Location: USA - FL - Orlando - John U.S. Starting Hourly Wage: $16.00 The starting hourly wage reflects the actual starting rate for this position. The actual hourly wage offered will be in accordance with state or local minimum wage requirements for the job location. U.S. based employees may be eligible for short-term incentives. U.S. based employees may be eligible to participate in medical, dental, vision insurance, a 401(k) plan and company match, short-term and long-term disability coverage, basic life insurance, a tuition reimbursement program, paid volunteer time off, company holidays, and well-being benefits, among others. U.S. based employees are also eligible to receive, per calendar year, up to 80 hours of sick time, and new hires are eligible to accrue up to 120 hours of paid vacation. EEO Statement Takeda is proud in its commitment to creating a diverse workforce and providing equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, gender expression, parental status, national origin, age, disability, citizenship status, genetic information or characteristics, marital status, status as a Vietnam era veteran, special disabled veteran, or other protected veteran in accordance with applicable federal, state and local laws, and any other characteristic protected by law. LocationsUSA - FL - Orlando - JohnWorker TypeEmployeeWorker Sub-TypeRegularTime TypePart time Job Exempt No

Our client is a multibillion-dollar company that provides end-to-end managed services, technology, and consulting to enable the digital workplace for small to enterprise businesses. Join their team to be part of delivering individualized experiences to a diverse range of clients in a collaborative and productive workplace environment. Required Skills & Experience Minimum 2 to 3+ years of field service experience, specifically in commercial printers required Must be able to do extensive traveling via plane and / or car Must have commercial / large printer experience; Lexmark printer certification nice to have Experience working on commercial printers and have an electronics / mechanical aptitude Working knowledge of Windows operating systems, networks, databases and network security concepts and tools is required Working knowledge of the Microsoft Office application suite including MS Outlook Experience with multi-platform Windows O/S required Working knowledge of Rufus, Windows Server imaging, photo printing experience, ability to troubleshoot system connectivity, Windows configuration Ability to work independently in a retail environment Ability to lift up to 50lbs. Excellent customer service skills and professionalism Able to communicate effectively both written and verbally, with key stakeholders, leadership, partners, team members, other organizations, and customers Ability to coordinate and prioritize multiple tasks simultaneously while maintaining attention to detail and quality Demonstrated capability to achieve results in a fast-paced, client-driven environment What You Will Be Doing Project focus on upgrading advanced commercial printers at retail locations Duties may include replacing printer parts, paper feed, power supply, changing the print head, changing toner drum, transfer belt, image unit Perform complex upgrades and troubleshooting of printers, servers, hard drives, and monitor systems Provide on-site technical support to internal or external customers in resolving complex or escalated technology issues on operational or maintenance aspects of system equipment Install and remove equipment and systems as required Responsible for day-to-day operation of applications and equipment and serve as a customer contact on technical and service-related problems Ensure that all schedules, transmission, on-line systems, and problems are resolved in an accurate and timely manner Serve as a liaison between customers, departments, and within the organization to lead problem resolution and change management processes Determine the most cost-effective repair / resolution to minimize customer downtime

Immediate need for a talented Field Service Technician. This is a 03 months contract opportunity and is located in Altamonte Springs, FL(Onsite). Please review the job description below and contact me ASAP if you are interested. Pay Range: $20 - $23/hour. Employee benefits include, but are not limited to, health insurance (medical, dental, vision), 401(k) plan, and paid sick leave (depending on work location). Key Responsibilities: Project focus on upgrading advanced commercial printers at retail locations Duties may include replacing printer parts, paper feed, power supply, changing the print head, changing toner drum, transfer belt, image unit Perform complex upgrades and troubleshooting of printers, servers, hard drives, and monitor systems Provide on-site technical support to internal or external customers in resolving complex or escalated technology issues on operational or maintenance aspects of system equipment Install and remove equipment and systems as required Responsible for day-to-day operation of applications and equipment and serve as a customer contact on technical and service-related problems Ensure that all schedules, transmission, on-line systems, and problems are resolved in an accurate and timely manner Serve as a liaison between customers, departments, and within the organization to lead problem resolution and change management processes Determine the most cost-effective repair / resolution to minimize customer downtime Key Requirements and Technology Experience: Key skills; ["Field Support", "Commercial Printer Support", "Electro-Mechanical Repair", "Hardware Troubleshooting", "Printers"] Minimum 2 to 3 years of field service experience, specifically in commercial printers required Must be able to do extensive traveling via plane and / or car Must have commercial / large printer experience; Lexmark printer certification nice to have Experience working on commercial printers and have an electronics / mechanical aptitude Working knowledge of Windows operating systems, networks, databases and network security concepts and tools is required Working knowledge of the Microsoft Office application suite including MS Outlook Experience with multi-platform Windows O/S required Working knowledge of Rufus, Windows Server imaging, photo printing experience, ability to troubleshoot system connectivity, Windows configuration Ability to work independently in a retail environment Ability to lift up to 50lbs. Excellent customer service skills and professionalism Able to communicate effectively both written and verbally, with key stakeholders, leadership, partners, team members, other organizations, and customers Ability to coordinate and prioritize multiple tasks simultaneously while maintaining attention to detail and quality Demonstrated capability to achieve results in a fast-paced, client-driven environment Our client is a leading IT Industry . and we are currently interviewing to fill this and other similar contract positions. If you are interested in this position, please apply online for immediate consideration. Pyramid Consulting, Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. By applying to our jobs you agree to receive calls, AI-generated calls, text messages, or emails from Pyramid Consulting, Inc. and its affiliates, and contracted partners. Frequency varies for text messages. Message and data rates may apply. Carriers are not liable for delayed or undelivered messages. You can reply STOP to cancel and HELP for help. You can access our privacy policy here.

Concept The Fleet Technician I performs operations, technical and administrative duties for the Fleet Services Section. The most important and essential job function of the position is attitude which includes the following: interacting positively and cooperating with co-workers, responding politely to customers, working as a team member, functioning under intense time pressure and responding in a positive manner to supervision. The Fleet Technician I shall perform other related duties and tasks, as required and shall have the physical, mental and emotional abilities to perform the essential job duties of the position. Employee Benefits Medical, Dental, Vision 10 Paid Holidays Paid Time Off Direct Deposit, Bi-Weekly Pay Checks Tuition Reimbursement Education Incentive Free Employee Health Clinic Wellness Incentives FRS Retirement Employee Assistance Program (EAP) Free Employee Gym Life Insurance Deferred Compensation Plan Essential Functions Supervise trustees Perform shop maintenance Loan out vehicles Prepare impounded vehicle for release Maintain spare units Function as on call technician Prepares collision damage estimates Install and remove decals on equipment Perform automotive maintenance and repair Perform collision damage repair Utilize diagnostic equipment Perform emergency equipment repair and installation Perform welding Perform removal of equipment Perform maintenance on other equipment Process work orders Respond during natural disasters Work flexible hours Education, Professional Certification or License High School or GED *ASE Certification preferred Florida driver's license, CDL preferred Must attain sixteen (16) Continuing Education Units (CEUs) on an annual basis Professional Experience Two (2) years' documented experience in the automotive or collision repair field, or completed an automotive or collision repair program from a technical college or vocational school. Environmental Conditions Outdoor work in extreme temperatures Knowledge of Safety procedures PCSO policy and procedures Diagnostic equipment Automobile repair Emergency equipment Appropriate forms Ability to Operate a variety of vehicles Operate office equipment Follow written and verbal instructions Read and write English Skills Basic housekeeping Interpersonal Mechanical Mathematical Physical Requirements See at a normal range or with accommodation Hear at a normal range or with accommodation Speak English understandably Manual dexterity Walk Stand for long periods Sit for long periods Bend/squat Kneel Lift 100 lbs. Stoop Ambulate independently Ability to work in extreme weather Other *ASE: Automotive Service Excellence Equal Employment Opportunity Employer M/F/D/V Min USD $45,059.04/Yr. Max USD $61,410.54/Yr.

Permit Coordinator - St. Cloud, Florida A WORLD LEADER IN TESTING, INSPECTION & CERTIFICATION SERVICES Bureau Veritas offers dynamic, exciting employment opportunities with an attractive salary/benefit package and an opportunity to play a vital role with a global organization. If you would enjoy working in a dynamic environment and are looking for an opportunity to become part of a stellar team of professionals, we invite you to apply online today. Bureau Veritas is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, citizen status, sexual orientation, genetics, status as a protected veteran, or any other non-job-related characteristics. The Permit Coordinator is responsible for inspection scheduling, inspection reporting, and plan review processing, while completing organizational and administrative tasks to support the department's daily operations. Strong attention to detail and organizational abilities are needed to successfully sort and keep track of various time-sensitive tasks. The Permit Coordinator must be able to apply problem-solving and critical thinking skills for problem resolution when conflicts arise. Essential Duties and Responsibilities include the following. Other duties may be assigned. Process inspection requests and schedule inspections following company established procedures. Provides support for administrative functions in the assigned department. Answers incoming calls; processes mail, faxes, copying, FedEx shipments, etc. Manages the workload to ensure all tasks are completed within the established timeframes. Process final packets for Certificates of Occupancy or Completion. Assists clients to meet construction goals and timeframes. Identify and report conflicts or issues with scheduling and/or company databases. Communicates scheduling changes with staff and clients. Performs data entry and maintenance of company databases, directories and records. Performs a variety of essential record keeping duties, and maintains department record keeping and filing systems Process plans for review, acting as liaison between staff and client Assists with any other duty that is required to ensure inspections are scheduled and reported accurately. Performs other related duties, as directed. NOTE: Management retains the discretion to add to or change the duties of the position at any time. Experience: High school graduate with, at least, 3 years of office experience General knowledge of the Construction Industry Proficient with Microsoft Office programs Excellent communication skills with high level of English proficiency, both written and verbal, with an exhibited high level of professionalism. Extreme attention to detail, organizational and time management skills Skills: Knowledge of general office equipment- copier/fax/scanner, phone Problem-solving abilities Excellent customer service skills Must be able to understand and follow instructions Ability to work well with others in a collaborative team environment High energy level and able to work in a fast paced environment Computer Skills: Demonstrated knowledge of a variety of computer software applications in word processing, spreadsheets, document and database software (Outlook, Word, Excel, Adobe Acrobat). Work Environment: An employee in this position typically works in an office environment with controlled climate. Outside office travel is limited. Physical Demands: While performing the duties of this Job, the employee is regularly required to sit and work with computer systems for extended periods of time. The employee is occasionally required to lift up to 20 pounds. The vision requirements include: ability to adjust focus, distance vision and close vision.

The Company Miner Ltd, an OnPoint Company, is an industry-leading service and equipment solutions provider with branch-based operations across the country. OnPoint Group is a fast-paced and ever-changing company and has been awarded the Best Managed Companies Award by Deloitte and WSJ for three years running, as well as having been named to the Inc. 5000 Fastest Growing Companies list for eight consecutive years! We believe in challenging the status quo and finding a better way for our customers, which is how we have grow into the company we are today. Miner drives down the cost of warehousing and materials management operations saving our customers revenue and time by understanding their business, finding efficiencies in their operation, providing faster systems repairs and delivering expertly executed scheduled maintenance. For more than 20 years, Miner has consistently delivered professional emergency maintenance service, equipment analysis and proactive preventative maintenance solutions to companies throughout North America. Miner solutions leave their customers more time to focus on their core business - not on the business of maintenance and materials management. Job Summary Our Dock & Door Technicians a.k.a. “Service Professionals” are the core of our preventative and emergency response services for our customers. You may call them a “technician”, but the role is more than using tools to fix broken items. Service Professionals are on the road, troubleshooting complex issues in places like commercial buildings, aircraft hangers, schools, fire/police departments, and much more. A Service Professional might spend an hour fixing a broken door for a hospital garage and an hour later they could be heading to a large warehouse to fix loading dock equipment. This role has unique access to see the inner workings of some of the largest operations in North America, and that's just before lunchtime. Our people make us great and for us, that starts with finding the right person to fill our open positions. Anyone interested in this role should be able to answer yes to these questions: 1. Do I enjoy variety and complexity? 2. Does the idea of autonomy and independence excite me? 3. Can I have fun, while keeping it safe and efficient? 4. Am I looking for a career family and not just a job? 5. Would my friends and family describe me as a “tinkerer”? If you answered yes to those questions, we invite you to keep reading and hit that apply button! Room for Growth The exciting news about being a Service Professional is that you can start where your current skills best align with the level of work. Miner offers four levels of Service Professionals so that you can gain, advance, or refine your dock and door abilities. Apprentice Level (Level I) - best for candidates who have a passion for learning and a willingness to train. Experience working in any related field is a plus, but most importantly an understanding of mechanics and the ability to fix a variety of products is needed. Service Professional Level (Level II) - this is the sweet spot for anyone who has at least a year of experience in a related field and knowledge of the basic concepts of electrical and hydraulic troubleshooting. Service professionals are well attuned to customers and can communicate effectively while in the field. Senior Level (Level III) - possesses experience in basic repairs in the AED, Highspeed, or gate fields with a proficient understanding of hydraulic and electrical troubleshooting. Candidates will typically have 4 years of experience in this field. Expert Level (Level IV) - are the masters of their craft, skilled in electrical and hydraulic troubleshooting with a mechanical mindset, leadership skills and extensive knowledge in dock leveler and door repairs. Candidates will possess at least 8 years of experience. We encourage you to apply no matter your experience level. If you know where your skills would be best suited feel free to call them out on your resume or application (help us in our review, so we can help you). If you aren't sure what level would best suit your experience, apply, and let Miner guide you! What You'll Do Service Professionals are responsible for hands-on customer care. They troubleshoot, service, inspect, install, and repair industrial equipment of all shapes and sizes. There is paperwork involved (what job doesn't have it), as a Service Professional there is expectation that work orders be maintained on paper and digitally. The role operates a vehicle regularly to visit different customer sites and plays a major part in maintaining safety and OSHA compliance for the Company. Requirements What We Look For Qualified candidates answered “Yes” to all of our questions AND will have in their toolbox, the following skills: 2-4 years of relevant experience…we care more about how you execute, the quality of your work product, and if you can make an impact to Miner customers. Ability to repair industrial facilities, including doors, loading docks, and dock-levelr's. Ability or a desire to learn welding, steel fabrication, and electrical. If you have Hydraulic and Pneumatics experience, awesome, call it out on your submission so we know where to find you! Ability to take direction and work independently while on the road for hours each day. Strong communication, problem solving, and analytical skills. The ability to think through complex situations critically is a must. Technical school training and OEM certifications are desired but not required. Ability to work a flexible schedule, with nights, weekends, and Holidays. Overtime opportunities are available, so a willingness to work is what we need. A clean driving record and a valid Driver's License for the state of employment is required. What's In It For You We thought you'd never ask. Take a peak at our benefits page to learn more about the Benefits offered to all Miner employees. In addition to those benefits, Service Professionals can look forward to: Competitive pay, including quarterly bonus incentives Uniform and boot allowance Training and the opportunity for growth Company issued truck for work travel, can be taken home as well Autonomy and independence Competitive PTO and Paid Holidays Full benefits package starting day one - includes medical, dental, vision, 401k, and much more If you've read through and believe you would make an impact as a Service Professional at Miner, we invite you to apply now and look forward to welcoming you as a guest of our career family! Miner Ltd. considers applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, genetic information, marital or veteran status, or any other legally protected status. Disclaimer This job posting may also appear on other job boards. While we encourage you to explore these opportunities, please be aware that we do not endorse or control the content on these external sites. We are not responsible for the accuracy, completeness, or reliability of information posted on other job sites, and we are not liable for any damages or losses that may arise from your use of that information. You are solely responsible for verifying the accuracy and completeness of any information you obtain from external sources. Salary Range The pay range noted represents the company's good faith minimum and maximum range for this role at the time of posting. The actual compensation offered to a candidate will be dependent upon several factors, including but not limited to experience, qualifications, and geographic location. Employees may be eligible for additional incentive pay. Salary Description $20.00 - $35.00 per hour

OUC - The Reliable One, is presently seeking a Master Technician (Mechanical) - Chilled Water to join the Electric & Water Production division. At OUC, we don't just work - we're building a bright future of innovation and transformation for future generations. We are looking for an experienced Journeyman Chiller Mechanic (5 years) with strong mechanical experience. This highly knowledgeable, independent professional will be responsible for complex troubleshooting, service and maintenance of mechanical equipment including chillers, cooling towers, pumps, fans, gears, compressors, piping, valves etc. In this role, the Journeyman will be working at our Epic facility which is outfitted with some of the latest and greatest equipment and technological advancements. The ideal candidate will be comfortable working independently in a high noise environment. Some work may require working from ladders, platforms, and scaffolds from elevations over 100 feet necessitating keen attention to detail and safety consciousness. OUC is an industry leader and the second largest municipal utility in Florida committed to innovation, sustainability, and our community, OUC's mission is to provide exceptional value to our customers and community by delivering sustainable and reliable services and solutions. Join a team of visionary Change Agents, Strategists, and Community Ambassadors who understand the vital role of diverse experiences in powering creativity and industry transformation. At OUC, each position contributes to the success and achievement of our goals. Click here to learn more about what we do. The ideal candidate will have: * High School diploma or equivalent education. * Two (2) years of formal trade school training or two (2) years of equivalent experience with emphasis in HVAC mechanical equipment and chillers. * Minimum of five (5) years of experience as a Journeyman Chiller Mechanic (not including equivalent education) in performing mechanical troubleshooting, repair and installation of chilled water plant equipment. * Mechanical Master Technicians must have factory chiller training. * Certified Universal Refrigerant License under EPA Section 608 of the Clean Air Act required. * Valid Driver's License. OUC offers a very competitive compensation and benefits package. Our Total Rewards package includes, to cite a few: * Competitive compensation * Low-cost medical, dental, and vision benefits and paid life insurance premiums with no probationary period. * OUC's Hybrid Retirement Program includes a fully funded cash balance account, defined contribution with employer matching along with a health reimbursement account * Generous paid vacation, holidays, and sick time * Paid parental leave * Educational Assistance Program, to include tuition reimbursement, paid memberships in professional associations, paid conference and training opportunities * Wellness incentives and free access to all on-site OUC fitness facilities * Access to family-oriented recreational areas * Paid Conference and Training Opportunities * Free downtown parking Click here to view our Benefits Summary. Salary Range: Starting at $41.924 per hour (Estimated $87,2019.92 annually) with a structured step progression system and performance-based pay increases every 6 months up to $48.138 per hour (Estimated $100,127.04 annually) - commensurate with experience Location: 6003 Pershing Ave., Orlando, FL 32822 Please see below a complete Job description for this position. Job Purpose: Performs one or more of the following specialized trades: * Mechanical: Complex troubleshooting, service and maintenance of mechanical equipment including but not limited to chillers, cooling towers, pumps, fans, gears, compressors, piping, valves, etc. * Electrical: Complex troubleshooting, service and maintenance of electrical equipment including but not limited to low (120V) and medium voltage (230/480V) switchgear, relays, etc. * Instrumentation: Complex troubleshooting, service, maintenance and validation of instrumentation equipment including but not limited to HVAC systems, electronic circuits, programmable controllers, energy delivery stations, BTU Meters, transmitters, BACnet devices; and basic programming of trends, graphics and alarms. Primary Functions: * Install, maintain, troubleshoot and service all types of mechanical, electrical and instrumentation systems under minimum supervision. * Ensure the safety of all equipment and personnel in the course of performing job duties. * Provide supervision to technicians and contractors during maintenance and repair activities. * Utilize the OUC LOTO system at all times. * Identify and execute appropriate refrigerant recovery techniques and safety procedures used during the detection and repair of refrigerant leaks. * Read and understand equipment manuals, blueprints, flowcharts, and other technical data. * Report and document maintenance performed utilizing computer systems and spreadsheets. * Work independently and possess excellent customer service skills. * Work extended hours when required. * Non-Essential Functions: * Perform emergency maintenance and maintain Chilled Water Plants and equipment during abnormal conditions (adverse weather, chemical spills) with minimal supervision using all proper safety equipment including SCBA. * Assist in general plant cleanliness duties. Technical Requirements: * Willingness to work extended hours when required, including nights, weekends, and holidays. * Working knowledge of general industrial safety skills. * Demonstrated verbal and written communications skills. * Ability to read and understand mechanical, structural, and piping and instrumentation drawings. * Ability to read electrical schematic drawings, logic diagrams, electrical one line drawing, and electrical three line drawings in the performance of job duties. * Ability to read control loop drawings, piping and instrument drawings, and logic drawings in the performance of job duties. * Basic computer skills. Education/ Certification/Years of Experience Requirements: * High School diploma or equivalent education. * Two (2) years of formal trade school training or two (2) years of equivalent experience with emphasis in one or more of the following areas: 1) HVAC mechanical equipment; 2) electrical systems; 3) instrumentation systems. * Minimum of five (5) years of experience (not including equivalent education) in performing mechanical, electrical or instrumentation troubleshooting, repair and installation. * Mechanical Master Technicians must have factory training; * Electrical Master Technicians must be licensed by the State of Florida; and must possess master skills to execute the scope for low (120V) and medium voltage (230/480V) systems under minimum supervision;. * Instrumentation Master Technicians must have factory training in programmable logic controllers; * Certified Universal Refrigerant Transition and Recovery Technician under EPA Section 608 of the Clean Air Act required. * Valid Driver's License. Working Conditions: This job very frequently involves exposure to chemicals and working in a high noise environment. This job frequently involves exposure to extreme weather, insects, heights, confined areas, and heat. This job occasionally involves exposure to noxious fumes. Chilled Water Plant environment includes rotating equipment, electrical equipment, high noise areas, and elevations exceeding 100 feet. Will be required to work from ladders, platforms, scaffolds or platforms while performing duties. Chilled water plants are a high noise environment. Occasional exposure to water treatment chemicals within the chilled water plants. Physical Requirements: This job consists of very frequent standing, walking, lifting up to twenty (20) lbs, bending/stooping, reaching over head, speaking/hearing, and detailed inspection/reading/editing. This job consists of frequent lifting (21-40) lbs, pushing, pulling, and/or digging, climbing (ladders, stairs, hills), and typing/CRT (attention to detail). This job consists of occasional sitting, lifting (50+) lbs, kneeling and/or crawling, and writing. This job may involve occasional monitoring/operating cranes/hoists. This job consists of very frequent monitoring or operating vehicles such as pickup trucks/vans, shop tools (both hand and power operated) and/or test equipment. Must be medically qualified to conduct hazmat emergency response including donning and the use of an SCBA with a Level A Chemical Suit. OUC-The Reliable One is an Equal Opportunity Employer who is committed through responsible management policies to recruit, hire, promote, train, transfer, compensate, and administer all other personnel actions without regard to race, color, ethnicity, national origin, age, religion, disability, marital status, sex, sexual orientation, gender identity or expression, genetic information and any other factor prohibited under applicable federal, state, and local civil rights laws, rules, and regulations. EOE M/F/Vets/Disabled

at Whaley Foodservice ***HIRING IMMEDIATELY!!!**** ***Sign On Bonus Available for Qualified Service Technicians*** Whaley Foodservice, LLC is one of the largest commercial kitchen equipment repair service companies in the Southeast comprised of over 600 employees located across 31 geographically dispersed locations.Visit "Whaley Careers" to find your place to grow. ********************************* Pay Rate: $31.00-39.00/hour* At Whaley we know people are vital to our success. We offer a competitive salary, on-call pay, and generous benefits including Sign-On Bonuses for Experienced Technicians Company Vehicle | Mobile Device | Uniforms Meters & Test Equipment Industry Certification 401k & Profit Sharing Paid Holidays & Vacation Medical & Dental Benefits Short-Term Disability | Long-Term Disability Insurance (company paid) Life Insurance (company paid) To learn more about current opportunities, visit Whaley Careers: ********************************* Summary: The Service Technician II provides maintenance, service, and repair for commercial cooking equipment and commercial refrigeration i.e. grills, fryers, ovens, ice machines, reach-in and walk-in coolers, freezers, etc. Details Diagnoses, troubleshoots, and repairs commercial cooking kitchen equipment, refrigeration. Communicates status updates for part order(s) and repairs with branch support and customer. Completes service calls accurately and timely. Audits truck stock to ensure required parts are stocked. Ensures service vehicle, tools, and uniforms are consistent with Whaley standards of safety. Meets on-call requirements. Required Education | Experience Three years of experience in commercial kitchen repair and or refrigeration. Must be 18 years of age. Completion of a satisfactory background check and drug screen is required. Valid Driver's license and driving record that aligns with our safety standard. Skills and Abilities Ability to work independently Ability to accurately diagnose and troubleshoot: an automotive, electrical, installation, and mechanical background is a plus. Journeyman License and or CFESA certification not required but would be a plus. Strong attention to detail. Excellent communication and soft skills. Good driving record Whaley Foodservice is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Description ***HIRING IMMEDIATELY!!!**** ***Sign On Bonus Available for Qualified Service Technicians*** Whaley Foodservice, LLC is one of the largest commercial kitchen equipment repair service companies in the Southeast comprised of over 600 employees located across 31 geographically dispersed locations.Visit "Whaley Careers" to find your place to grow. ********************************* Pay Rate: $31.00-39.00/hour* At Whaley we know people are vital to our success. We offer a competitive salary, on-call pay, and generous benefits including Sign-On Bonuses for Experienced Technicians Company Vehicle | Mobile Device | Uniforms Meters & Test Equipment Industry Certification 401k & Profit Sharing Paid Holidays & Vacation Medical & Dental Benefits Short-Term Disability | Long-Term Disability Insurance (company paid) Life Insurance (company paid) To learn more about current opportunities, visit Whaley Careers: ********************************* Summary: The Service Technician II provides maintenance, service, and repair for commercial cooking equipment and commercial refrigeration i.e. grills, fryers, ovens, ice machines, reach-in and walk-in coolers, freezers, etc. Details Diagnoses, troubleshoots, and repairs commercial cooking kitchen equipment, refrigeration. Communicates status updates for part order(s) and repairs with branch support and customer. Completes service calls accurately and timely. Audits truck stock to ensure required parts are stocked. Ensures service vehicle, tools, and uniforms are consistent with Whaley standards of safety. Meets on-call requirements. Required Education | Experience Three years of experience in commercial kitchen repair and or refrigeration. Must be 18 years of age. Completion of a satisfactory background check and drug screen is required. Valid Driver's license and driving record that aligns with our safety standard. Skills and Abilities Ability to work independently Ability to accurately diagnose and troubleshoot: an automotive, electrical, installation, and mechanical background is a plus. Journeyman License and or CFESA certification not required but would be a plus. Strong attention to detail. Excellent communication and soft skills. Good driving record Whaley Foodservice is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job DescriptionBenefits: QSEHRA Safety equipment provided 401(k) 401(k) matching Competitive salary Dental insurance Flexible schedule Free uniforms Health insurance Opportunity for advancement Paid time off Parental leave Training & development Vision insurance ASSE 6040 Medical Gas Technician Location: Orlando, FL Pay Range: $60,000 $75,000 per year Job Type: Full-Time About Compliance Solutions, LLC Compliance Solutions, LLC is a leading provider of medical gas compliance and testing services across the healthcare industry. We help hospitals, surgery centers, and healthcare systems maintain the highest standards of safety and regulatory compliance. Our mission is to deliver exceptional service, technical precision, and reliabilityempowering our clients to meet every standard with confidence. Position Overview We are seeking an experienced ASSE 6040 Medical Gas Technician to join our growing team in Orlando, FL. The ideal candidate will hold an active ASSE 6040 certification and have hands-on experience with the inspection, testing, and maintenance of medical gas and vacuum systems. This role requires a high level of technical expertise, attention to detail, and commitment to safety and compliance. Key Responsibilities Perform inspections and functional testing of medical gas and vacuum systems per ASSE 6040 standards Verify the integrity and operation of piping systems, outlets, zone valves, alarms, and related components Document inspection results and testing data thoroughly and accurately Identify deficiencies, communicate findings to clients, and recommend corrective actions Collaborate with healthcare facility staff to support compliance and safety initiatives Maintain up-to-date knowledge of ASSE standards, NFPA 99, and other applicable regulations Requirements Active ASSE 6040 certification (required) Minimum 1 year of experience in medical gas system installation, testing, or maintenance Strong working knowledge of ASSE and NFPA 99 standards Exceptional attention to detail and documentation accuracy Professional communication and interpersonal skills Ability to work independently and within a team environment Commitment to safety, compliance, and quality service Benefits Competitive salary ($60,000$75,000 based on experience) Health, dental, and vision insurance Retirement savings plan Paid time off (PTO) Flexible schedule and on-the-job training Relocation assistance (for qualifying candidates) Referral bonuses and performance-based incentives Tools and safety equipment provided License/Certification ASSE 6040 Certification (Required) Work Location On the road (Field-based) Ability to commute to or relocate within the Orlando, FL area required Employer-provided relocation package available

Build your best future with the Johnson Controls team As a global leader in smart, healthy, and sustainable buildings, our mission is to reimagine the performance of buildings to serve people, places, and the planet. Join a winning team that enables you to build your best future! Our teams are uniquely positioned to support a multitude of industries across the globe. You will have the opportunity to develop yourself through meaningful work projects and learning opportunities. We strive to provide our employees with an experience, focused on supporting their physical, financial, and emotional wellbeing. Become a member of the Johnson Controls family and thrive in an empowering company culture where your voice and ideas will be heard - your next great opportunity is just a few clicks away! What we offer Competitive base salary and a comprehensive bonus program. Three weeks paid vacation in a calendar year/holidays/sick time/three PTO days in a calendar year. Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one. Extensive product and on the job/cross training opportunities Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Providing Scheduling and management support. JCI Employee discount programs (The Loop by Perk Spot What you will do Perform HVAC Control systems programming, troubleshooting, installation, commissioning, and preventative maintenance as it is related to mechanical, electrical, and low voltage controls components. Respond to service and warranty calls using Johnson Controls configuration and commissioning tools as well as a variety of hand tools including electrical testing meters and other electronic testing equipment. Provide front line technical and repair support through effective communications with Johnson Controls customers. Provide HVAC Controls system repair and/or update recommendations and assist in proposing of recommendations to Johnson Controls customers. Be part of an expanding team of the best technicians in the industry while you build career with a first-class global organization. How you will do it Loading Johnson Controls field and network level controller software. Performing commissioning and system diagnostics for all levels of system controllers as well as end devices (i.e. Sensors, actuators, etc.) and complete all required commissioning documentation. Keeps management and JCI contractor or customer informed of job progress and issues. Calibrates systems requiring basic electronic test equipment. Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation. Documents changes and provides information for as-built documentation. Execute company sponsored as well as personally initiated training to ensure the highest level of knowledge and capability are maintained Engage with customers to fully understand their systems and needs. Communicates with the JCI contractor or customer upon arrival and before leaving the work site. Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Required: HVAC Controls Experience Strong understanding of HVAC systems, sequence and applications Demonstrated technical aptitude in mechanical and electro-mechanical fields Able to use hand, power tools and electrical testing equipment such as a multi meter. Solid knowledge base in use of personal computers. Attention to detail. Good communication and listening skills. (Depending on location, the mounting and termination of low voltage devices may have special licensing requirements.) HIRING HOURLY RANGE: $26.92 - $35.58 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, location and alignment with market data.) This position includes a competitive benefits package. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

The Company provides industrial waste services to its customers. The Industrial HazMat Driver operates a tractor-trailer and other truck equipment to haul industrial waste to a variety of final disposal or recycle facilities. The Industrial HazMat Driver provides efficient response times and a high level of service to the Company's customers. Responsibilities ransports hazardous waste, hazardous materials, industrial fluids, and non-hazardous wastes in compliance with Department of Transportation (DOT) guidelines. Operates a variety of vehicles including, but not limited to vans, straight trucks, tankers, vacuum tankers and roll offs. Performs safety inspections and maintains a DOT driver's log and records, as required by DOT. Conducts pre- and post-trip inspections of all equipment operated as required or instructed. Maintains satisfactory customer service by maintaining radio and/or telephone communication with dispatch, supervisor, or manager to receive instructions on pickups and deliveries. Completes work tickets and maintains daily inventory of tools, fittings and other equipment associated with the transport vehicle. Reports all safety issues, incidents and concerns to Company management and notifies of current and/or anticipated repair needs. Responsible for making sure all jobs are operated in the most efficient and cost-effective manner. Use Personal Protective Equipment when needed or required Performs other job-related duties as assigned or apparent.May require up to 30% regional travel Qualifications High school diploma or GED Knowledge of equipment associated with the trucking of industrial and/or hazardous waste Minimum Qualifications Class A Commercial Driver's License with tanker and hazmat endorsements. Minimum of 1 year of experience driving commercial tr

Salary Range$23.88-$30.45Job Posting End Date - Applications will no longer be accepted starting Job Summary Salary: Generator Technician I: $21.41-$27.305 Generator Technician II: $22.61 -$28.83 Generator Technician III: $23.88 -$30.45 Performs a variety of skilled tasks in the maintenance, repair, and modification of natural gas and diesel fired electric generating power plant and related equipment. Work includes servicing, repairing, and maintaining natural gas and diesel engine driven electric generators and related equipment. Work assignments are received orally and in writing and may be accompanied by sketches and diagrams. Work is performed with considerable independence within established policies, procedures, and technical guidelines. Work is reviewed by the Trades Maintenance Chief through conferences, reports, and results obtained. Minimum Qualifications: Generator Technician I: High School Diploma/G.E.D. Certificate and one (1) year of experience in repair, operation, and maintenance of various types of diesel, gasoline, natural gas, and propane-fueled generator sets or similar equipment; or an equivalent combination of education, training, and experience. Valid Florida Class E Driver's License required. Generator Technician II: High School Diploma/G.E.D. Certificate and two (2) years' experience in repair, operation, and maintenance of various types of diesel, gasoline, natural gas, and propane-fueled generator sets or similar equipment; or an equivalent combination of education, training, and experience. Valid Florida Class E Driver's License required. Generator Technician III: High School Diploma/G.E.D. Certificate and four (4) years experience in repair, operation, and maintenance of various types of diesel, gasoline, natural gas and propane fueled generator sets or similar equipment; or an equivalent combination of education, training, and experience. Valid Florida Class E Driver's License is required. Additional Qualifications for Promotion: Promotions are not to be considered an automatic function of longevity and are subject to the review and authorization of the Supervisor. The employee's last performance review must have resulted in an overall rating of Meets standards or better with no factor rating of less than meets. Important: To be eligible to proceed forward in the application process, applicants must meet the minimum qualifications listed in the position description. Please ensure your application provides details of all relevant experience related to the position. If you have questions or need clarification concerning the position or application process, please contact Human Resources at **************** or ************. If this posting indicates a degree is required, the following experience will apply in lieu of any degree as follows: Two (2) years of direct experience for an associate degree; Four (4) years of direct experience for a bachelor's degree; Six (6) years of direct experience for a master's degree; or Nine (9) years of direct experience for a doctoral degree.

Central Florida Toyota, a Penske Automotive Group dealership, is looking for Technician Helpers to join our team and deliver extraordinary customer experiences. JOIN OUR TEAM At Penske Automotive Group (PAG), we strive to create a positive and challenging workplace that promotes excellence and achievement, and we aim to deliver the very best experience possible to our customers. We are looking for dedicated and motivated professionals who share that same passion to join our team. Imagine working in a professionally and financially satisfying job where you have the opportunity to make a positive impact on our organization and customers every day. As a Technician Helper, you will assist the Service Technician as they diagnose and repair vehicles and perform basic preventative maintenance and vehicle repairs in accordance with manufacturer's standards and company polices. If you are currently enrolled in the Toyota Technician Training & Education Network Program (T-TEN), we encourage you to apply! WHAT WE HAVE TO OFFER Fortune 500 company, ranked among the "World's Most Admired Companies" by Fortune Magazine Consistently recognized by Automotive News as among the "Best Dealerships to Work For." Comprehensive benefits program, including health care options (medical, dental and vision) and 401k savings and retirement plan with company match. Training, resources and opportunities for career growth and advancement, tailored to individual performance, experience and interests. Values-driven culture built on integrity, professionalism, excellence, and teamwork. State-of-the-art facilities and excellent working conditions. WHAT WE ARE LOOKING FOR Genuine interest in providing an exceptional customer experience. Friendliness, enthusiasm, reliability, with a positive "team-player" attitude. Strong work-ethic with the ability to work in a fast-paced, results-driven environment. Safe working knowledge of shop tools and equipment, and dealership experience. Brand knowledge is preferred, but not required. Experience as an Express Technician, Lube Technician, or Oil Change Technician. WHAT YOU CAN BRING TO THE TABLE Commitment: Ensure our customers have a world-class service experience at every step along their ownership journey, especially in vehicle repairs. Excellence: Provide an unparalleled level of technical knowledge and expertise to help repair and maintain vehicles to the highest factory and dealership standards. Communication: Clearly and effectively communicate technical information regarding customer vehicles to Service Advisors. Accountability: Comply with all manufacturer standards of quality and timeliness for repairs and maintenance work and ensure that all estimates and work orders are accurate. Safety: Understand and comply with all federal, state, and local regulations that affect shop operations, such as handling and disposal of hazardous waste, OSHA, and use of safety and health personal protective equipment. APPLY WITH US! If you are ready for a rewarding career with competitive compensation and benefits, and opportunities to excel and advance, consider joining the Penske Automotive Group organization. Our interview process typically includes a phone interview, several in-person interviews, background check, reference check, driving record review and a drug screen. Be a part of the best customer experience team in the automotive industry... apply with us today! Penske Automotive Group is an equal opportunity employer and maintains a drug- and alcohol-free workplace. Some positions may require applicants to possess a valid driver's license and have a good driving record.

Summit Broadband Inc. is a cutting edge, fiber-based broadband provider delivering best in class residential, commercial, and hospitality technology solutions. This growing, dynamic high-tech company headquartered in sunny Central Florida, is seeking a Fiber Splicing Technician to join our Outside Plant team and grow with us. The new Summit Broadband is poised for an incredible future fueled by team members dedicated to being the best. Position Summary: The Fiber Splicing Technician must have very strong customer service skills. This employee will spend time in customer premises and will also interface with high level clients and management teams. Customer service both while installing and during troubleshooting operations is critical to this position. This individual will be responsible for all tasks associated with customer installation. This position will also be responsible for all fiber splicing both new construction and repairs. Technical responsibilities: Responsible for splicing of fiber optic and Copper Cable for new construction, repair, and maintenance Responsible for the installation, repair, and maintenance of all Summit Broadband's products and services through field operations as follows: Telephone Copper, Coax, Fiber Cable TV Coax, Fiber, Set Top Boxes, Cable Modems Internet Cable Broadband (Coax), Fast Ethernet and Gigabit Ethernet networks (Cat5/Cat6), DSL (Twisted-pair Copper), Fiber Ethernet (Fiber) Home and Small Business Networking Basic Wireless/Wire LAN services Basic Network Security Business Networking: Install and maintain DS1 level circuits Install, repair, and maintain channel banks Basic Business Class Telephony Testing Setup and test rotary, sequential Hunt Groups Basic installation and repair acceptance testing of light levels, RF levels, metallic Loop Test Basic central office wiring Installation, repair, and maintenance of inside wire including twisted pair copper, Cat5, and Coax Basic troubleshooting of small home and office LAN networking and configurations Ensures customer satisfaction by providing quality service and identifying customer needs. General responsibilities: Responds to the needs of a 24/7/365 operation Must be able to work after hours and weekends. Remain in service during outages until resolved Remain in a state of readiness to handle call issues when on call. Readiness includes being in local market, be in a state of mind so as to perform service and having company provided communications equipment ready to receive calls. Must be able to work emergency schedules during natural disasters and network outages Requirement to meet up-selling and upgrading of customers with additional Summit Broadband's products and services Full accountability in safety, productivity, quality, workmanship and customer service Maintain vehicle in a clean and professional manner Dress in approved Summit/OTC branded clothing and arrive to work in a neat and professional manner Ability to multi-task Ability to deal with and solve problems using solid judgment skills Uses excellent hearing and listening skills to receive detailed information Other duties as assigned including non-technical Requirements Job Qualifications: Must have valid driver's license with a clear MVR Employee is required to drive during night time conditions You must have close vision, color vision, depth perception and the ability to adjust your focus with good hand-eye coordination Must be able to pass standard background check Must pass pre-employment and compulsory drug screening High School Diploma or General Education Degree (GED) required Three to five years telecommunications experience required Must be able to lift 75 lbs repeatedly Must be able and willing to climb ladders and work on utility poles Must be able and willing to work in adverse weather conditions and attics and crawlspaces This job could require working from a bucket truck and performing various work duties from such an environment Must have and maintain own required hand tools Computer skills to sufficiently process trouble tickets Knowledge of Excel and Word Other Duties: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. Summit Broadband, Inc. is an Equal Opportunity Employer. The Company participates in the E-Verify program.

Wastequip WRX - our Equipment Service Division ( ******************** ) - is seeking Mechanics who want to level up their career. We will provide tools, training a truly great team and a work environment which allows you to not only be a mechanic, but a partner for our customers. All you need to bring is a can-do attitude and problem-solving capabilities. Hourly Rate Range: $22.96 to $37.10 based on experience Summary of essential job functions • Maintains vehicle functional condition by listening to operator complaints; conducting inspections; repairing mechanical and electrical systems malfunctions; replacing parts and components • Complies with state vehicle requirements by testing engine, safety, and combustion control standards. • Maintains vehicle appearance by cleaning, washing, and painting. • Maintains vehicle records by recording service and repairs. • Keeps shop equipment operating by following operating instructions; troubleshooting breakdowns; maintaining supplies; performing preventive maintenance; calling for repairs. • Contains costs by using warranty; evaluating service and parts options. • Increase job knowledge by participating in educational opportunities; reading technical publications. • Ability to lift 50lbs plus, bend, stoop, kneel and climb ladders. • Above all, must be able to work closely with co-workers or other team members. • Looking for the right individuals that show integrity, in self and in their work. Minimum requirements • 1 year of Truck or Heavy Equipment mechanic diagnosis (maintenance) experience is required. • 1 year of 12/24 volt electrical experience is required. • Ability to understand hydraulic and electrical schematics is required. • 1 Year Fabrication Experience is preferred. • 1 Year Welding experience preferred. • ASE certification is preferred. • Waste collection equipment knowledge will be a large plus for this position. Required License or Certification: Have a DOT (non-CDL) medical card or willingness to obtain within 90 days of employment. CDL preferred but not required. Company Benefits: • 2 Medical Plan Options - Base HSA (High Deductible) and Buy-Up Medical Plans • Prescription (Rx) Insurance • Health Savings Account (HSA) • 2 Dental Plan Options - Base Dental and Buy-Up Dental Plans • Vision Insurance • Flexible Spending Accounts (FSA's) • Health Care FSA • Dependent Care FSA • Company Paid Base Life Insurance • Company Paid Accident, Death & Dismemberment Insurance • Company Paid Business Travel Accident Insurance • Company Paid Disability Insurance ▪ Short-Term Disability (STD) and Base Long-Term Disability (LTD) Insurance • Employee Assistance Program (EAP) • Voluntary Hospital, Accident & Critical Illness (Cancer) Insurance • 401(K) Retirement Plan with 50% Company Match • Voluntary Pet Insurance • Vacation and Personal/Sick Time • Paid Grandparent Leave • Paid Bonding Leave • Adoption Assistance • Education Assistance (Tuition Reimbursement) About Wastequip Wastequip got its start in 1989 with containers and compactors. But, today, we have evolved into so much more than just a manufacturer of high-quality steel containers and compactors. We are the waste industry's only All-in-One solutions provider - from carts and containers to collect waste to hoists and trash trucks to move the waste to parts, service and technology to keep your operation running smoothly. While we're proud to be North America's leading manufacturer of waste handling equipment, we are equally proud to be a driving force for enhanced sustainability across the waste industry. We are consistently striving to improve our own operations while making it easier for our customers to do the right thing - building a brighter future for all.

Aramsco is always looking for dynamic and energetic team players to join our family of companies! Aramsco, a family of companies, is a leading solutions provider to specialty contractors across North America, serving numerous end markets including abatement, restoration, environmental, emergency preparedness, stone care, cleaning and surface preparation. The company has more than 60 locations through which it distributes products, equipment and chemicals, and provides customers with other value-added services including equipment repair, equipment rental and education. Aramsco is seeking a skilled Automotive Electrical Technician to join our growing team. This role is critical to ensuring the reliable installation and functionality of electrical systems and equipment on light and medium duty trucks. Projects primarily include installing lighting systems, truck mounted attenuators (TMAs), and various traffic safety equipment. Primary Duties and Responsibilities Key Responsibilities Install, troubleshoot, and repair 12V electrical systems on commercial vehicles. Wire and mount lighting systems, control panels, and warning devices. Build wiring harnesses for lighting systems and control boxes. Make custom brackets to mount lights/strobes, controllers, and distribution boxes. Install truck mounted attenuators and other vehicle-mounted safety systems. Read and interpret electrical schematics, wiring diagrams, and installation manuals. Perform quality control checks and safety inspections on completed installations. Diagnose and repair customers' lighting/electrical systems, truck-mounted attenuators, and various other traffic safety equipment. Maintain accurate records of work completed and parts used. Collaborate with team members to meet production timelines and project specifications. Operate a forklift for transporting materials. Operate manual material handling equipment such as hand jacks and wheeled carts safely. Lift and carry merchandise as needed. Maintain a clean, safe, and organized work area. Keep warehouse, including inventory, neat and orderly. Assist in waste disposal and recycling activities. Assist with inventory counts. Perform other duties as assigned by management. Adhere to all safety procedures and company policies. Shift: Monday - Friday; 6AM - 2:30PM plus overtime as needed. Hourly pay rate 20-23.00 Qualifications 2+ years of experience in automotive electrical work or related field (vocational training considered) Strong knowledge of 12V systems, relays, fuses, and wiring standards Experience with upfitting or outfitting work vehicles is a plus Ability to use hand and power tools safely and effectively Ability to read and interpret technical documents and schematics Strong attention to detail and commitment to quality work Must be able to lift up to 50 lbs. throughout your shift Must be able to lift, bend, sit, and stand for 8 - 10 hours per day Must take direction well and work well within a team Preferred Skills Experience installing TMAs, emergency lighting, or traffic safety equipment ASE or EVT certifications are a plus Welding or fabrication experience a bonus Qualifications/ Skills Benefits (Full-Time Employees): Health/Vision/Dental insurance. Paid vacation. Paid holidays. 401(k) with employer matching. Life insurance is provided. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. ****************************

Earn $40,000-85,0000 a year! Signing Bonus! Flexible Hours! Unlimited Income Opportunity! Training Provided! Up to 3 weeks vacation! Have you ever worked on.... HVAC Systems? Kitchen Appliances? Sewing Machines? Marine Motors? Electric Motors? Than this job is for you! Come join our professional, talented service team today! Quote and repair equipment, such as auto-scrubbers (even some are Robotic), vacuums, floor machines and extractors, you will have a great time and create great memories in doing so! Requirements Job Requirements: Ability to install, repair, service, test and troubleshoot equipment Must be able to read schematics and diagrams Excellent communication, interpersonal and diagnostic skills Working knowledge of the equipment needed for the job Ability to work independently without much supervision Must be able to meet the physical requirements of the job which include bending, lifting heavy equipment and working in confined spaces driver's license and reliable transportation Ability to effectively manage time