Aircraft mechanic jobs in Fairfield, CA - 40 jobs

Requisition ID # 169484 Job Category: Maintenance / Construction / Operations Job Level: Individual Contributor Business Unit: Electric Operations Work Type: Onsite This posting is to collect applications for the Journey-level Lineworker Line of Progression including Journey-level Lineworkers and Compliance Inspectors. Check out our PG&ELineworker Careers page for information about our locations, benefits as well as other useful information! Department Overview The workers of Electric Transmission and Distribution (T&D) ensure the delivery of safe and reliable electric service to our customers. Electric T&D is responsible for every aspect of PG&E's electric distribution and transmission operations, including planning, engineering, maintenance and construction, asset management, business planning, restoration and emergency response. Our Maintenance Crew is tasked with the Maintenance and/or restoration of high voltage and electrical facilities within PG&E's system. They are our primary crews used for emergency restoration and are the first for call-outs. Our General Construction (GC) Department is comprised of approximately 700 employees, tasked with the Construction and Maintenance of high voltage electrical facilities within PG&E's system. It is a mobile work force that may travel throughout PG&E's service territory to perform its work. Position Summary All Journey Lineworker classifications and the associated line of progression are represented by IBEW Local 1245. This position is a DOT (Department of Transportation) covered classification and is subject to random drug and/or alcohol screening. We are hiring qualified Journey-level Lineworkers to work throughout our service territory in Distribution and Transmission, Division and General Construction positions, as well as Compliance Inspectors. Open positions are predominantly in California's North Coast and Bay Area, however additional locations and classifications could become available at any time based on changing business needs. Please note that Transmission T-200 positions require a 2-year commitment to the Transmission Department per LOA 22-18 and T-200 and T-300 positions in De Anza, Peninsula, San Francisco and San Jose require a 3-year commitment per LOA 22-06. This position may be subject to Joint Apprentice Training Committee (JATC) review and approval. Provisional hires will be required to participate in targeted training to achieve journey-level knowledge of Journey Lineworker roles and responsibilities. Journey Lineworkers are responsible for building and maintaining electric power systems and for restoring electric service to commercial, industrial, agricultural and residential customers. They are expected to test, frame and set poles; climb poles, work in confined spaces; splice and terminate cables. Our Lineworkers will have had successfully completed a federal or state sanctioned apprenticeship (with approved supporting documentation) and/or IBEW sponsored line worker apprenticeship. Work is predominantly outdoors and in all weather conditions. Lineworkers must be able to drive safely, work extended hours; travel/transfer to new headquarter upon request at any time (General Construction Positions), and wear company provided Personal Protective Equipment. Compliance Inspectors conduct visual inspections of electric poles and enclosures by driving and or walking the electric distribution system to identify hazards that impact safety, company liability and / or asset life, pursuant to General Order 165. Various diagnostic tests are performed during detail inspections such and infrared imaging, pole shell testing and conductor height measurements. The individual will perform, repair work on poles and substructures as required. PG&E is providing the hourly rate that the company in good faith believes it might pay for this position at the time of the job posting. This position is subject to collectively bargained hourly wage rates and increases. The starting wage rate for this position is $73.78 per hour. This wage rate is specific to the locality of the job. The wage rate is based on multiple factors, including, but not limited to, specific skills, education, licenses or certifications, experience, market value, geographic location, collective bargaining agreements, and internal equity. Job Responsibilities Journey Lineworker * ----------------------------- * Travels to various job locations within geographical assigned region (for General Construction). * Reviews job work requirements and provides input regarding work for the day. * Loads and unloads tools, materials and supplies into and out of vehicles at crew headquarters and job site. * Lifts, pulls and carries insulators, cross-arms, equipment, tools, grounds, dampers, and other materials to and from job sites. * Loads and unloads tools, materials, and equipment off of hand lines while standing on elevated structures that include: Wood poles and insulated work platforms. * Climb poles using boot hooks or aerial lift. * Tests, frames; sets and/or anchors poles; strings electric power lines and install cross-arms. * Performs substation switching; installs and replaces switches, circuit protection equipment, insulators, meters and streetlights. * Hangs and energizes transformers. * Take voltage readings. * Troubleshoots problems and determines extent of repairs on primary and secondary overhead or underground dead legs. * Work will include the use of hand and power tools; digging holes by hand for pole installation; climbing ladders, poles, embankments and towers; working at heights above 35' on poles and in aerial lifts; setting grounds; working with live circuits; and working in trenches, manholes and confined spaces. * Sets and installs underground structures, locates, pulls, removes, splices or terminates cables. * Installs and replaces equipment, meters and streetlights. * Operates hydraulic equipment including: drills, boom truck, digger, pole tamper, hydraulic jack and bucket truck once certified. * Operates lift equipment such as aerial lifts and line truck booms. * Operates forklift to load and unload work materials and supplies. * Travels by vehicle, motor boat or off-road utility vehicle (OUV) to access job sites * May drive a Class A vehicle (i.e. bucket truck and line truck) to and from the job site. May drive a company pickup truck or passenger vehicle to job sites and work locations, meetings and training and will may use vehicle to go to vendor locations and pick up or deliver supplies and materials. * Conducts daily vehicle inspections. * Journey Lineworker may provide back-up relief in temporary absence of Crew Lead; direct work to other crewmembers and act as a leader. * Must attend all mandated OSHA and company training. * Provides on-the-job training, orientation, demonstration and assistance to apprentice lineworkers. Compliance Inspector * ----------------------------- * Receives and reviews work assignments and routes; plans routes, checks directions and locations; obtains vehicle safety inspection. * Drives company vehicle on designated inspections route and /or to offsite training. Fuels vehicle at designated fueling stations as needed. * Inspects the condition of overhead and underground distribution facilities which includes manholes and vaults which require ladder climbing and an environment with tight spaces. * Walks, climbs, bend, kneel, crawls or squats to access structures and equipment. * Lifts metal cabinet doors. * Unlocks / re-locks gates, doors, enclosures and manholes, as needed. * Uses hand and power tools to open access panels, lift manhole covers, remove or secure damaged equipment; remove broken parts or debris; make minor repairs to gain access. * Uses metal detectors to locate buried facilities; infrared sensor to determine status of underground connections. * Communicates in person, by phone and by radio with supervisors/public officials, customers and other departments regarding findings, identified problems, proposed solutions, and estimated time frames and to gain access, as needed. * Perform detailed paper work, documenting work performed, to record site locations, findings, identified problems, proposed solutions, and estimated time frames. * Keep records for equipment repairs and replacements. * Uses log sheets to write up maintenance tags and describe findings in field for entry into database. * Attends daily / regularly schedule tailboard meetings or communicates with supervisor to learn safety guidelines / potential hazards in compliance with Utility standard. * Utilize hand held computers and Global positioning systems (GPS). * Use digital cameras to document field conditions. * Perform journey level line work and minor repairs that can be safely performed without help (e. g. remove low pole steps, repair broken ground moldings, repair high voltage signs and other PG&E identifiers on underground enclosures, remove / repair bolts on lids and locking devices on pad mounted equipment). * Work as part of a construction crew, as needed. Qualifications Minimum: * Completion of a federal or state sanctioned lineworker apprenticeship with approved supporting documentation and/or union or union-affiliated sponsored lineworker apprenticeship * Must be at least 18 years of age * High School diploma, GED or equivalent work experience * Must possessed a valid California Class A driving permit by first day of employment * Must have passed a California DMV medical exam by first day of employment * Ability to wear company provided Personal Protective Equipment (PPE) * Ability to lift and carry up to 100 pounds * Ability to work and drive in all types of weather and road conditions * Capable to work extended hours, nights, weekends and holidays * Ability to travel and transfer to a new headquarter upon request at any time; throughout the entire PG&E service territory * If hired as Provisional, must complete the provisional training plan within one year from hire date. Desired: * 2 years of Journey Lineworker experience if an outside line apprenticeship was completed * Completion of Lineworker apprenticeship from a Utility preferred * Utility Journey Lineworker experience preferred * Experienced in rubber gloving and hot stick procedures * Experience in transmission and distribution work, underground and numerous voltages * Effective team player with strong communication skills Pre-Employment Testing PG&E Employees: You must have qualified on all prerequisite tests prior to submitting an application, and all secondary tests prior to interviewing. For more information on prerequisite and secondary exams, including study guides, please visit the Pre-employment testing program website. * Post-Offer Phys Assessment Lineworkers * Journey Assessment of Lineworker Progression #lnmn #featuredjob

Before you apply to a job, select your language preference from the options available at the top right of this page. Explore your next opportunity at a Fortune Global 500 organization. Envision innovative possibilities, experience our rewarding culture, and work with talented teams that help you become better every day. We know what it takes to lead UPS into tomorrow-people with a unique combination of skill + passion. If you have the qualities and drive to lead yourself or teams, there are roles ready to cultivate your skills and take you to the next level. Job Description: This position performs aircraft maintenance on UPS fleet to meet or exceed airworthiness standards. Performs the change, removal, replacement, or upgrade of aircraft components to correct failures or implement changes. Conducts troubleshooting of complex pneumatic, hydraulic, engine, and structural components and systems. This position documents procedures per established processes to ensure regulatory compliance. Job Responsibilities Responsible for the maintenance and preventive maintenance of aircraft Operate and maintain UPS equipment safely Run, taxi, and tow aircraft for the purpose of maintenance and repositioning of aircraft as trained and qualified to do so Determines airworthiness of aircraft and components, in accordance with established procedure and Federal Aviation Regulation Completes aircraft maintenance forms entries and enters data into a Maintenance Data Systems, ensures entries are accurate and complete Services and inspects aircraft, components, and related equipment Ensure consistent, accurate aircraft maintenance by properly completing turnover entries on unfinished maintenance in the turnover log Follow all Maintenance Department policies and procedures Keep a clean and orderly work environment Make recommendations to improve functions within the Maintenance Department Attend UPS assigned training Perform other duties as assigned by Line Maintenance Supervisor or the Director of Maintenance Required Qualifications Must have a High School Diploma or GED equivalent Must have a valid FAA Airframe and Powerplant license Must have a valid driver's license Must have a minimum of three (3) years aircraft maintenance experience that could include but not limited to: Boeing, Airbus and/or McDonnell Douglas aircraft Military jet aircraft Regional /Commuter aircraft Knowledge of computer systems Troubleshooting skills and ability to read and interpret Aircraft Manuals and Illustrated Parts Catalogues Federal Aviation Administration required Drug Testing Information (FAA): As part of the UPS pre-employment process for a safety sensitive position, a drug screen is required. UPS Must receive a negative test result before you can be put into a safety sensitive position (14 CFR Part 120.107). Please be advised that you will be tested in accordance with 14 CFR Part 120.109(a)(5) and 14 CFR 120 Subpart E to determine the presence of marijuana, cocaine, opiates (including codeine, heroin-6AM, morphine), opioids-hydrocodone, hydromorphone, oxycodone & oxymorphone, phencyclidine (PCP), and amphetamines/methamphetamines (including MDMA, MDA) or metabolites of these drugs. Starting Pay: $30.13 Benefits: Competitive weekly pay Medical, dental, and vision after waiting period Defined-benefit pension plan 401(k) Paid vacation Paid holidays Paid Sick and Family and Medical Leave time as required by law Discounted Employee Stock Purchase Program Employee Assistance Program **Please note, you are applying for only the gateway listed in the job title of this position. Employee Type: Permanent UPS is committed to providing a workplace free of discrimination, harassment, and retaliation. Other Criteria: UPS is an equal opportunity employer. UPS does not discriminate on the basis of race/color/religion/sex/national origin/veteran/disability/age/sexual orientation/gender identity or any other characteristic protected by law. Basic Qualifications: Must be a U.S. Citizen or National of the U.S., an alien lawfully admitted for permanent residence, or an alien authorized to work in the U.S. for this employer. Pay Range: For this union-represented posting, wage rates and ranges and benefit offerings are governed by applicable collective bargaining agreement provisions. The starting pay rate for this position starts at $30.13/hr. The company offers the following benefits for this position, subject to applicable eligibility requirements. Weekly pay, extensive training, growth opportunities, 401(K), defined-benefit pension plan, medical-dental and vision after waiting and or probation period, paid vacation, paid sick and family and medical leave time as required by law, paid holidays, education assistance program, discounted employee stock purchase program.

Wilson Utility Helicopters has immediate opening for a Base/Field Helicopter Mechanic to support the power line construction helicopter operations in the field and at our Maintenance Facility in Acampo California. Prior Bell 407 and/or Bell 205A++ experienced applicants may be offered a direct 14/14 schedule. Job Requirements: 5 years Total Helicopter Maintenance 2 years of Bell 407 4 Year of Bell 205A++ Experience 2 year of Helicopter Field Maintenance preferred A&P (IA a plus) Familiarity with MS Word, Excel and Outlook Favorable Consideration to: Bell 407 Factory School or Equivalent Bell 205 /212 Maintenance Training Able to obtain a CDL/Hazmat/tanker Mechanics who live in Northern CA Other requirements: Must be willing to travel Must be willing to learn and operate Aeronet (Maintenance Tracking Software) Must be able to establish a safe working relationship with co-workers Must be capable of managing time, work load and parts in field operations Compensation is commensurate with experience and skills. Excellent benefits package including 401K and employer paid medical. Wilson Utility Helicopters is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Alcohol and drug free environment. Successful candidates will be required to pass post-offer and random drug tests. Travel: Yes

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers. If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. IMMEDIATELY HIRING! Helicopter Mechanic (Float) FULL-TIME Opportunity in Remote, CA *Please note, Float Mechanics are traveling mechanics and do not need to reside in the state of California. Starting Salary: $76,752 - $111,946 annually (including 20% geo modifier) IA Stipend 2,080 Float Stipend 10,400 Sign-On Bonus 12,500 We're hiring an Aircraft Maintenance Technician (AMT) float responsible for the overall maintenance and safety of our fleet across multiple locations within the Company footprint. This technician will be qualified to support our EC130, EC135, and AS350 airframes. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients. Responsibilities Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. Manage inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log, place replacement requests when necessary and document part expenditures. Clearly document service paperwork and FAA information as required and adhere to policies and procedures while complying with the company's information security standards. Take pride in sustaining a safe and clean working environment for the aircraft maintenance team and flight crew. Use appropriate communication methods to help facilitate coordination of efforts between departments, vendors and team members. Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow AMTs and operations team. Minimum Required Qualifications Three (3) years turboprop and/or turbine powered fixed-wing experience Valid Airframe and Powerplant (A&P) license Valid State issued Driver's license High School diploma or GED equivalent Federal Aviation Regulations knowledge EMS Systems, Aircraft maintenance systems, records and maintenance support and planning Ability to work a flexible schedule including overtime and 24/7 on-call rotations. Must be acceptable in accordance with the FAA drug and alcohol testing program. Must be able to push and/or pull 100+ lbs. Must be able to lift and/or carry up to 50 lbs. Preferred Qualifications AS350, EC135, EC130 maintenance experience FAA Inspection Authorization Certificate Related experience under CFR Parts 133, 135 and 145 Autopilot maintenance experience Avionics and electrical repair experience Certificates/Security Clearances/Other Must have a valid Airframe & Powerplant (A&P) license

Float Aircraft Maintenance Technician (AMT) IMMEDIATELY HIRING! Helicopter Mechanic (Float) FULL-TIME Opportunity in Remote, CA *Please note, Float Mechanics are traveling mechanics and do NOT need to reside in the state of California Starting Salary: $76,752 - $111,946 annually (including 20% geo modifier) Float Stipend 10,400 IA Stipend 2,080 Sign-On Bonus 12,500 We're hiring an Aircraft Maintenance Technician (AMT) float responsible for the overall maintenance and safety of our fleet across multiple locations within the Company footprint. This technician will be qualified to support our AS350, EC130 and EC135 airframes. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients. Responsibilities Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. Manage inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log, place replacement requests when necessary and document part expenditures. Clearly document service paperwork and FAA information as required and adhere to policies and procedures while complying with the company's information security standards. Take pride in sustaining a safe and clean working environment for the aircraft maintenance team and flight crew. Use appropriate communication methods to help facilitate coordination of efforts between departments, vendors and team members. Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow AMTs and operations team. Minimum Required Qualifications Three (3) years turbine powered helicopter experience Valid Airframe and Powerplant (A&P) license Valid State issued Driver's license High School diploma or GED equivalent Federal Aviation Regulations knowledge EMS Systems, Aircraft maintenance systems, records and maintenance support and planning Ability to work a flexible schedule including overtime and 24/7 on-call rotations. Must be acceptable in accordance with the FAA drug and alcohol testing program. Must be able to push and/or pull 100+ lbs. Must be able to lift and/or carry up to 50 lbs. Preferred Qualifications AS350, EC135, and EC 130 maintenance experience FAA Inspection Authorization Certificate Related experience under CFR Parts 133, 135 and 145 Autopilot maintenance experience Avionics and electrical repair experience Why Choose REACH? As a quality air medical transport service, REACH is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement: Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. More Information about this Job: Check out our careers site benefits page to learn more about our benefit options.

Float Aircraft Maintenance Technician (AMT) IMMEDIATELY HIRING! Helicopter Mechanic (Float) FULL-TIME Opportunity in Remote, CA * Starting Salary: $76,752 - $111,946 annually (including 20% geo modifier) * IA Stipend 2,080 * Float Stipend 10,400 * Sign-On Bonus 12,500 * Float Mechanics are traveling mechanics and do not need to reside in the state of California. We're hiring an Aircraft Maintenance Technician (AMT) float responsible for the overall maintenance and safety of our fleet across multiple locations within the Company footprint. This technician will be qualified to support our EC130, EC135, and AS350 airframes. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients. Responsibilities * Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. * Manage inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log, place replacement requests when necessary and document part expenditures. * Clearly document service paperwork and FAA information as required and adhere to policies and procedures while complying with the company's information security standards. * Take pride in sustaining a safe and clean working environment for the aircraft maintenance team and flight crew. * Use appropriate communication methods to help facilitate coordination of efforts between departments, vendors and team members. * Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow AMTs and operations team. Minimum Required Qualifications * Three (3) years turboprop and/or turbine powered fixed-wing experience * Valid Airframe and Powerplant (A&P) license * Valid State issued Driver's license * High School diploma or GED equivalent * Federal Aviation Regulations knowledge * EMS Systems, Aircraft maintenance systems, records and maintenance support and planning * Ability to work a flexible schedule including overtime and 24/7 on-call rotations. * Must be acceptable in accordance with the FAA drug and alcohol testing program. * Must be able to push and/or pull 100+ lbs. * Must be able to lift and/or carry up to 50 lbs. Preferred Qualifications * AS350, EC135, EC130 maintenance experience * FAA Inspection Authorization Certificate * Related experience under CFR Parts 133, 135 and 145 * Autopilot maintenance experience * Avionics and electrical repair experience Why Choose REACH? As a quality air medical transport service, REACH is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. Check out our careers site benefits page to learn more about our benefit options. R0047975

Definition: This is the entry and first working level for certificated Airframe and Powerplant technicians. Incumbents at this level work under the guidance of a Lead Technician and inspect and repair aircraft, engines, and components, and return aircraft to service. Minimum Qualifications: Possession of the following certificates: FAA Airframe & Powerplant Technician's Certificates and a valid Class-C Driver's License. Knowledge and Abilities: FAA federal aviation regulations pertaining to the maintenance and repair of aircraft; FAA-approved maintenance practices, techniques, and procedures; and aircraft shop maintenance operational procedures. Work under the general guidance of a lead or journey level technician and perform maintenance and repair to aircraft, engines, propellers, rotors, and components in accordance with approved procedures; learn various aircraft maintenance requirements, standards, and procedures; determine the airworthiness of airframe and engine components; inspect systems for proper operation and condition. May perform Confined Space Entry Maintenance to include aircraft fuel tank repairs. ** Expect approximately 10% - 50% travel, including overnight stays, to fire bases throughout California** Salary and Other Compensation: The hourly rate for this position is $49.72 per hour. Factors which may affect starting pay within this range may include [geography/market, skills, education, experience and other qualifications of the successful candidate.] Benefits: The Company offers the following benefits for this position, subject to applicable eligibility requirements: medical insurance, dental insurance, vision insurance, 401(k) retirement plan, life insurance, long-term disability insurance, short-term disability insurance, Vacation accrued bi-weekly (80 hours) for 1-4.99 years of Company service (increases every 5 years), Personal Leave - accumulates at four (4) hours per pay period to a maximum of thirteen (13) days per calendar year, 10 Recognized Holidays. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

Join us and make YOUR mark on the World! Lawrence Livermore National Laboratory (LLNL) has turned bold ideas into world-changing impact advancing science and technology to strengthen U.S. security and promote global stability. Our mission spans four critical national security areas nuclear deterrence, threat preparedness, energy security, and multi-domain defense empowering teams to take on the toughest challenges of today and tomorrow. With a culture built on innovation and operational excellence, LLNL is a place where your expertise can make a real impact. Job Description We have an opening for a Boiler & Pressure Systems Mechanic II. You will install, operate, maintain, and repair a combination of packaged boilers and pressure systems associated with building heating HVAC (heating hot water and low-pressure steam), process steam, related operating systems, and utilities of LLNL plant and research facilities. You will work independently and interact as a member of a multi-disciplinary team. This position is in the Infrastructure Maintenance and Utilities Department. This position requires full-time on-site presence due to the nature of the work. You will * Perform journey-level boiler technician work including troubleshooting, installation, operations/operator, and maintenance and repair of hot water boilers, low-pressure steam boilers, thermal fluid systems, medium pressure steam generating equipment (including ASME Section l steam boilers), Low NOx burners, and related systems and components; to include combustion tuning, Burner Management System programming, and steam boiler water treatment testing. * Install, operate, maintain, and repair a wide variety of mechanical and electrical equipment using materials, power tools, hand tools, and specialty tools applicable to the trade. * Provide effective customer service and communication necessary to interact effectively with a multi-disciplinary team, including peers, supervisors, customers, ES&H (Environmental, Safety, and Health) technicians, and other crafts personnel. * Analyze complex data and prepare logs (boiler and water treatment), standard reports, permit requirements, deficiency forms, and preventive maintenance work requests. * Use a computer and hand-held electronic device for completing daily work orders, time reporting and web-based training. * Work scheduled and emergency overtime. * Perform all assignments in accordance with ES&H, security, and business practice requirements and policies. * Perform other duties as assigned. Qualifications * Ability to secure and maintain a U.S. DOE Q-level security clearance which requires U.S. Citizenship. * High School Diploma, GED or equivalent. * Completion of an apprenticeship training program and/or significant equivalent journey- to advanced- level experience working with a combination of commercial packaged hot water and steam boilers as well as low and high-pressure steam systems. * Intermediate to advanced skills, knowledge, and experience related to troubleshooting, operating and maintaining steam boilers, hot water boilers, thermal fluid heaters, and related systems, (e.g. expansion tanks, pumps, valves, water treatment, PLC based burner management systems, and electrical components) including basic electrical knowledge for AC circuits and DC circuits. * Experience using hand tools, power tools and instruments of the trade such as Combustion Analyzer, Manometer, electrical metering, and circuit testing equipment, as well as experience using water treatment testing equipment. * Demonstrated effective interpersonal, verbal, and written communication skills necessary to interact with a multidisciplinary workforce and customer base and customer service skills and ability to work independently as well as in a cross-functional team. * Ability to become medically qualified to wear respiratory and other protective equipment and perform moderate work while wearing full-face or half-mask respirators. * Experience applying and following state and federal safety regulations and demonstrated ability to obtain and maintain required training and certifications including Competent Worker or equivalent qualifications. * Demonstrated basic computer skills with hand-held electronic devices necessary to complete work orders, time reporting, and web-based training. * Valid California driver's license and ability to work scheduled, on-call, and emergency overtime. Pay Range $48.76 - $59.27 Hourly This position is under a Collective Bargaining Agreement and step structure. Step placement will be determined after your qualifications are fully assessed during the interview process. Additional Information #LI-Onsite Position Information This is a Career Indefinite position, open to Lab employees and external candidates. Why Lawrence Livermore National Laboratory? * Included in 2026 Best Places to Work by Glassdoor! * Flexible Benefits Package * 401(k) * Relocation Assistance * Education Reimbursement Program * Flexible schedules (*depending on project needs) * Our values - visit ***************************************** Site 300 Site 300 is an experimental test site operated by LLNL. Situated on 7,000 acres in rural foothills approximately six miles southwest of downtown Tracy and 15 miles southeast of Livermore, Site 300 hosts approximately 200 employees with expertise in such fields as engineering, chemistry, biology, and environmental restoration. Employees assigned to work at Site 300 may be exposed to the organism that causes San Joaquin Valley Fever (coccidioidomycosis). Security Clearance This position requires a Department of Energy (DOE) Q-level clearance. If you are selected, we will initiate a Federal background investigation to determine if you meet eligibility requirements for access to classified information or matter. Also, all L or Q cleared employees are subject to random drug testing. Q-level clearance requires U.S. citizenship. Davis Bacon Act The Laboratory performs a variety of work, including some that may fall under Davis Bacon Act requirements. When work scope falls under this Act, the Laboratory complies with the prevailing wage requirements. Pre-Employment Drug Test External applicant(s) selected for this position must pass a post-offer, pre-employment drug test. This includes testing for use of marijuana as Federal Law applies to us as a Federal Contractor. Wireless and Medical Devices Per the Department of Energy (DOE), Lawrence Livermore National Laboratory must meet certain restrictions with the use and/or possession of mobile devices in Limited Areas. Depending on your job duties, you may be required to work in a Limited Area where you are not permitted to have a personal and/or laboratory mobile device in your possession. This includes, but not limited to cell phones, tablets, fitness devices, wireless headphones, and other Bluetooth/wireless enabled devices. If you use a medical device, which pairs with a mobile device, you must still follow the rules concerning the mobile device in individual sections within Limited Areas. Sensitive Compartmented Information Facilities require separate approval. Hearing aids without wireless capabilities or wireless that has been disabled are allowed in Limited Areas, Secure Space and Transit/Buffer Space within buildings. Pre-Placement Medical Exam A job related pre-placement medical examination may be required. How to identify fake job advertisements Please be aware of recruitment scams where people or entities are misusing the name of Lawrence Livermore National Laboratory (LLNL) to post fake job advertisements. LLNL never extends an offer without a personal interview and will never charge a fee for joining our company. All current job openings are displayed on the Career Page under "Find Your Job" of our website. If you have encountered a job posting or have been approached with a job offer that you suspect may be fraudulent, we strongly recommend you do not respond. To learn more about recruitment scams: ***************************************************************************************** Equal Employment Opportunity We are an equal opportunity employer that is committed to providing all with a work environment free of discrimination and harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, national origin, ancestry, sex, sexual orientation, gender identity, disability, medical condition, pregnancy, protected veteran status, age, citizenship, or any other characteristic protected by applicable laws. Reasonable Accommodation Our goal is to create an accessible and inclusive experience for all candidates applying and interviewing at the Laboratory. If you need a reasonable accommodation during the application or the recruiting process, please use our online form to submit a request. California Privacy Notice The California Consumer Privacy Act (CCPA) grants privacy rights to all California residents. The law also entitles job applicants, employees, and non-employee workers to be notified of what personal information LLNL collects and for what purpose. The Employee Privacy Notice can be accessed here. Videos To Watch

If you have what it takes to become part of the Vistra family and would like to start a promising career with a global leader, take a look at the exciting employment opportunities that are currently available and apply online. Key Accountabilities: * Proficient in primary skill required of position * Proficient skills for maintaining equipment at the plant * Performs troubleshooting and documentation, and assists in the resolution of problems discovered on shift * Performs daily maintenance, overhauls, calibration, troubleshooting, repair/replacement and removal/installation of plant equipment and systems. * Makes decisions and recommends appropriate repair techniques for plant equipment to peers, supervisors, plant management. * Conducts excitation system inspections and preventive maintenance * Proficient in operating material handling equipment * Develops and implements plant operating procedures * Understands relationship of equipment to plant systems * May provide instruction and teaching to lower level employees * Ensures strict adherence to safety, health and environmental procedures as they relate to plant operations and maintenance including but not limited to Lockout Tagout, Job Safety Analysis, Confined Space, Hot Work, Electrical Safety and PPE Education, Experience, and Skill Requirements: * At least 4 years related experience * Satisfactory completion of Tier 2 within primary skill for position job performance measure * Minimum of High School diploma or equivalent * If applicable, candidate will hold the required level of state license as recognized by the governing body of that particular state (MA, OH) * Demonstrate computer based skills * Demonstrate effective oral & verbal communications skills * Independent knowledge of troubleshooting * Must pass POSS/MASS pre-employment test * This position can be filled at a level I, II, III or IV depending on experience and skill level. Physical Requirements: * Ability to work overtime and standby status are required. * Ability to hear and understand audible alarms, detect changes in noise levels of equipment, accurately read and interpret instruments and gauges, and communicate clearly on portable radios. * Ability to respond to plant emergencies * Ability to perform demanding work on heights under adverse conditions and when participating in emergency activities * Ability to climb stairs, ladders, and enter confined spaces as required to complete assigned task. * Ability to lift 50 lbs of weight. * Ability to pass respirator physical and fit test. * While performing the duties of this job, the employee will be exposed to weather conditions prevalent at the time. Key Metrics: * Satisfactory completion of Tier 3 training and qualification requirements * Demonstrate continual self improvement in job skills and knowledge. * This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee. Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice. Compensation Pay Range: $50.00 - $53.25/hour + Overtime Job Family Plant Operations Company Luminant Power LLC Locations Oakland Plant California We are a company of people committed to: Exceeding Customer Expectations, Great People, Teamwork, Competitive Spirit and Effective Communication. If this describes you, then apply today! If you currently work for Vistra or its subsidiaries, please apply via the internal career site. It is the policy of the Company to comply with all employment laws and to afford equal employment opportunity to individuals in all aspects of employment, including in selection for job opportunities, without regard to race, color, religion, sex, sexual orientation, gender identity, pregnancy, national origin, age, disability, genetic information, military service, protected veteran status, or any other consideration protected by federal, state or local laws. If you are an individual with a disability and need assistance submitting an application or would like to request an accommodation, please email us at assistance@vistraenergy.com to make a request.

The faculty member shall be responsible for the following: teaching assigned classes under the supervision of the area dean; helping students fulfill their maximum potential in mastering course content; assessing student learning outcomes; maintaining a thorough and up-to-date knowledge in their regular teaching field; continuing professional development; utilizing current technology in the performance of job duties; maintaining standards of professional conduct and ethics appropriate to the professional position; assisting with articulation and curriculum development and review; serving on college committees and participating in faculty governance including accreditation and student co-curricular activities; assuming other responsibilities as assigned by the area dean; fulfilling other duties and responsibilities of a full-time faculty member. This position is currently 100% instructional but may result in a Coordinator/Instructional split assignment. The proportion of duties assigned to coordination and instruction shall be determined by student, department, and program needs, and may range from 0% to 100% for either function. Position Salary Information: Initial maximum salary placement is based on academic degree, upper/graduate level units earned, and/or related professional occupational experience per the Los Rios College Federation of Teachers Contract(the initial maximum placement is Class V, Step 8). For more information on the step placement process, pleaseclick here. Typical Duties The instructional assignment may include, but is not limited to, teaching the following courses: * AMTP 200 Certificated Aircraft Mechanic Preparation * AMTP 312 Powerplant Theory - Turbine Engine Fundamentals * AMTP 330 Aircraft Inspection Fundamentals * AMTP 334 Aircraft Communication and Navigation Fundamentals * AMTP 337 Federal Aviation Administration Regulations and Form Applications To view a complete list of courses for this discipline, please visit the Programs and Majors webpage for the specific campus: * ARC Programs and Majors * CRC Programs and Majors * FLC Programs and Majors * SCC Programs and Majors Minimum Qualifications * Have any bachelor's degree or higher and two (2) years of professional experience as a certificated Federal Aviation Administration Aircraft Mechanic OR any associate degree and six (6) years of professional experience as a ertificated Federal Aviation Administration Aircraft MechanicOR the equivalent. Professional experience is required when the applicant possesses a master's degree. All degrees must be from an accredited institution completed by August 20, 2026. * Possess and maintain a current Federal Aviation Administration Mechanic certificate with both Airframe and Powerplant ratings. * Have an equity-minded focus, responsiveness, and sensitivity to and understanding of the diverse academic, socioeconomic, cultural, disability, gender identity, sexual orientation, and ethnic backgrounds of community college students, including those with physical or learning disabilities as it relates to differences in learning styles; and successfully foster and support an inclusive educational and employment environment. Application Instructions Before You Apply: Follow the steps below to ensure your application is complete and ready for review. Applicants not following the guidelines below may be disqualified. Do not submit additional materials not requested or you may be disqualified. Required Application Documents Applicants must attach the following: * Los Rios Community College District Application * Letter of Interest * Resume or Curriculum Vitae * Unofficial Transcripts and/or Foreign Transcript Evaluation (see Transcript Requirements) * Equivalency Determination Request Form (if applicable - see Minimum Qualification Requirements) * A Copy of Current Federal Aviation Administration Mechanic certificate with Both Airframe and Powerplant Ratings * Supplemental Questionnaire Document (see supplemental question section of application) Minimum Qualification Requirements: * Degree titles must match the stated qualifications exactly (word-for-word). * If the degree title differs, or if it contains added, missing, or rearranged words, applicants mustsubmit a completed Equivalency Determination Request Form for the application to be considered. See the Equivalency Determination Process webpage for details. * Example: If a master's in Psychology is required but the transcript lists Counseling Psychology and that title is not listed in the Minimum Qualifications, an Equivalency Determination Request Form must be submitted. * Previously granted equivalency in the discipline applying formustbe attached for verification. Email ************************** for a replacement copy. Transcript Requirements: * Transcripts must be from an accredited U.S. institutions or approved foreign evaluation agency. * Foreign transcript evaluations must be issued by an AICE (Association of International Credential Evaluation, Inc.) or NACES (National Association of Credential Evaluation Services) member agency. See the Foreign Transcript Evaluation webpage for details. * Transcripts mustclearly identify the degree(s) being used to meet the Minimum Qualifications. * If more than one degree is required to meet the Minimum Qualifications (e.g., a bachelor's and a master's), transcripts for each degree must be included. * Transcripts must show the degree title and indicate whether each degree is completed or in progress. * If the degree is in progress, the application must state, the month and year the degree is expected to be attained. Additional Instructions: * Only information listed on the application and transcripts will be used to verify Minimum Qualifications. * Applications stating "see resume"will be disqualified. * Applications missing any required documentation will be disqualified.

Requisition ID # 169484 Job Category: Maintenance / Construction / Operations Job Level: Individual Contributor Business Unit: Electric Operations Work Type: Onsite This posting is to collect applications for the Journey-level Lineworker Line of Progression including Journey-level Lineworkers and Compliance Inspectors. Check out our PG&ELineworker Careers page for information about our locations, benefits as well as other useful information! Department Overview The workers of Electric Transmission and Distribution (T&D) ensure the delivery of safe and reliable electric service to our customers. Electric T&D is responsible for every aspect of PG&E's electric distribution and transmission operations, including planning, engineering, maintenance and construction, asset management, business planning, restoration and emergency response. Our Maintenance Crew is tasked with the Maintenance and/or restoration of high voltage and electrical facilities within PG&E's system. They are our primary crews used for emergency restoration and are the first for call-outs. Our General Construction (GC) Department is comprised of approximately 700 employees, tasked with the Construction and Maintenance of high voltage electrical facilities within PG&E's system. It is a mobile work force that may travel throughout PG&E's service territory to perform its work. Position Summary All Journey Lineworker classifications and the associated line of progression are represented by IBEW Local 1245. This position is a DOT (Department of Transportation) covered classification and is subject to random drug and/or alcohol screening. We are hiring qualified Journey-level Lineworkers to work throughout our service territory in Distribution and Transmission, Division and General Construction positions, as well as Compliance Inspectors. Open positions are predominantly in California's North Coast and Bay Area, however additional locations and classifications could become available at any time based on changing business needs. Please note that Transmission T-200 positions require a 2-year commitment to the Transmission Department per LOA 22-18 and T-200 and T-300 positions in De Anza, Peninsula, San Francisco and San Jose require a 3-year commitment per LOA 22-06. This position may be subject to Joint Apprentice Training Committee (JATC) review and approval. Provisional hires will be required to participate in targeted training to achieve journey-level knowledge of Journey Lineworker roles and responsibilities. Journey Lineworkers are responsible for building and maintaining electric power systems and for restoring electric service to commercial, industrial, agricultural and residential customers. They are expected to test, frame and set poles; climb poles, work in confined spaces; splice and terminate cables. Our Lineworkers will have had successfully completed a federal or state sanctioned apprenticeship (with approved supporting documentation) and/or IBEW sponsored line worker apprenticeship. Work is predominantly outdoors and in all weather conditions. Lineworkers must be able to drive safely, work extended hours; travel/transfer to new headquarter upon request at any time (General Construction Positions), and wear company provided Personal Protective Equipment. Compliance Inspectors conduct visual inspections of electric poles and enclosures by driving and or walking the electric distribution system to identify hazards that impact safety, company liability and / or asset life, pursuant to General Order 165. Various diagnostic tests are performed during detail inspections such and infrared imaging, pole shell testing and conductor height measurements. The individual will perform, repair work on poles and substructures as required. PG&E is providing the hourly rate that the company in good faith believes it might pay for this position at the time of the job posting. This position is subject to collectively bargained hourly wage rates and increases. The starting wage rate for this position is $73.78 per hour. This wage rate is specific to the locality of the job. The wage rate is based on multiple factors, including, but not limited to, specific skills, education, licenses or certifications, experience, market value, geographic location, collective bargaining agreements, and internal equity. Job Responsibilities Journey Lineworker ------------------------------ Travels to various job locations within geographical assigned region (for General Construction). Reviews job work requirements and provides input regarding work for the day. Loads and unloads tools, materials and supplies into and out of vehicles at crew headquarters and job site. Lifts, pulls and carries insulators, cross-arms, equipment, tools, grounds, dampers, and other materials to and from job sites. Loads and unloads tools, materials, and equipment off of hand lines while standing on elevated structures that include: Wood poles and insulated work platforms. Climb poles using boot hooks or aerial lift. Tests, frames; sets and/or anchors poles; strings electric power lines and install cross-arms. Performs substation switching; installs and replaces switches, circuit protection equipment, insulators, meters and streetlights. Hangs and energizes transformers. Take voltage readings. Troubleshoots problems and determines extent of repairs on primary and secondary overhead or underground dead legs. Work will include the use of hand and power tools; digging holes by hand for pole installation; climbing ladders, poles, embankments and towers; working at heights above 35' on poles and in aerial lifts; setting grounds; working with live circuits; and working in trenches, manholes and confined spaces. Sets and installs underground structures, locates, pulls, removes, splices or terminates cables. Installs and replaces equipment, meters and streetlights. Operates hydraulic equipment including: drills, boom truck, digger, pole tamper, hydraulic jack and bucket truck once certified. Operates lift equipment such as aerial lifts and line truck booms. Operates forklift to load and unload work materials and supplies. Travels by vehicle, motor boat or off-road utility vehicle (OUV) to access job sites May drive a Class A vehicle (i.e. bucket truck and line truck) to and from the job site. May drive a company pickup truck or passenger vehicle to job sites and work locations, meetings and training and will may use vehicle to go to vendor locations and pick up or deliver supplies and materials. Conducts daily vehicle inspections. Journey Lineworker may provide back-up relief in temporary absence of Crew Lead; direct work to other crewmembers and act as a leader. Must attend all mandated OSHA and company training. Provides on-the-job training, orientation, demonstration and assistance to apprentice lineworkers. Compliance Inspector ------------------------------ Receives and reviews work assignments and routes; plans routes, checks directions and locations; obtains vehicle safety inspection. Drives company vehicle on designated inspections route and /or to offsite training. Fuels vehicle at designated fueling stations as needed. Inspects the condition of overhead and underground distribution facilities which includes manholes and vaults which require ladder climbing and an environment with tight spaces. Walks, climbs, bend, kneel, crawls or squats to access structures and equipment. Lifts metal cabinet doors. Unlocks / re-locks gates, doors, enclosures and manholes, as needed. Uses hand and power tools to open access panels, lift manhole covers, remove or secure damaged equipment; remove broken parts or debris; make minor repairs to gain access. Uses metal detectors to locate buried facilities; infrared sensor to determine status of underground connections. Communicates in person, by phone and by radio with supervisors/public officials, customers and other departments regarding findings, identified problems, proposed solutions, and estimated time frames and to gain access, as needed. Perform detailed paper work, documenting work performed, to record site locations, findings, identified problems, proposed solutions, and estimated time frames. Keep records for equipment repairs and replacements. Uses log sheets to write up maintenance tags and describe findings in field for entry into database. Attends daily / regularly schedule tailboard meetings or communicates with supervisor to learn safety guidelines / potential hazards in compliance with Utility standard. Utilize hand held computers and Global positioning systems (GPS). Use digital cameras to document field conditions. Perform journey level line work and minor repairs that can be safely performed without help (e. g. remove low pole steps, repair broken ground moldings, repair high voltage signs and other PG&E identifiers on underground enclosures, remove / repair bolts on lids and locking devices on pad mounted equipment). Work as part of a construction crew, as needed. Qualifications Minimum: Completion of a federal or state sanctioned lineworker apprenticeship with approved supporting documentation and/or union or union-affiliated sponsored lineworker apprenticeship Must be at least 18 years of age High School diploma, GED or equivalent work experience Must possessed a valid California Class A driving permit by first day of employment Must have passed a California DMV medical exam by first day of employment Ability to wear company provided Personal Protective Equipment (PPE) Ability to lift and carry up to 100 pounds Ability to work and drive in all types of weather and road conditions Capable to work extended hours, nights, weekends and holidays Ability to travel and transfer to a new headquarter upon request at any time; throughout the entire PG&E service territory If hired as Provisional, must complete the provisional training plan within one year from hire date. Desired: 2 years of Journey Lineworker experience if an outside line apprenticeship was completed Completion of Lineworker apprenticeship from a Utility preferred Utility Journey Lineworker experience preferred Experienced in rubber gloving and hot stick procedures Experience in transmission and distribution work, underground and numerous voltages Effective team player with strong communication skills Pre-Employment Testing PG&E Employees: You must have qualified on all prerequisite tests prior to submitting an application, and all secondary tests prior to interviewing. For more information on prerequisite and secondary exams, including study guides, please visit the Pre-employment testing program website. Post-Offer Phys Assessment Lineworkers Journey Assessment of Lineworker Progression Start Locations: Eureka, CA; Geyserville, CA; Lodi, CA; Merced, CA; Petaluma, CA; Santa Rosa, CA; Willits, CA; End Locations #lnmn #featuredjob

5K Sign On Bonus For Qualified AMTs About Us ATP is the nation's largest flight school, providing students with the most efficient path to a successful airline pilot career. For over 40 years, ATP has been the leader in professional flight training and supplying pilots to regional and major airlines. Why you'll love working for us No shift work…ever! Monday - Friday day shift only Work with the best and brightest on new Cessna 172s, Piper Archers and Piper Seminoles A fleet size of over 650 aircraft Supportive team culture built around safety-focused decision making Well-equipped facilities with abundant resources (parts, tech data, support, etc.) The role The Aircraft Mechanic role works as a member of a team performing everything from light maintenance to heavy structural repairs on our fixed-winged aircraft. The right candidate will possess a results-driven mindset and the collaborative spirit necessary to ensure efficient workflow while keeping safety and quality as non-negotiable top priorities. Responsibilities Perform efficient troubleshooting, aircraft maintenance, and repairs in accordance with applicable aviation regulations, manufacturer's instructions, and company policies on our single engine and multi-engine piston powered flight training aircraft. Ensure consistent, accurate aircraft maintenance records by properly documenting & completing required forms, computer entries, and logbook entries. Follow all policies and procedures Keep a clean and orderly work environment Perform job duties in a safe manner Perform other duties as assigned Qualifications Airframe and Powerplant (A&P) Certificate 2 or more years of piston-powered aircraft maintenance experience Knowledge and understanding of Federal Aviation Regulations and manufacturer manuals Possess adequate tools FAA Inspection Authorization (preferred not required) Private pilot's license (preferred not required) Avionics troubleshooting experience with Garmin integrated avionics (preferred not required) Benefits ATP offers a comprehensive employee benefits program, including: 5K Sign On Bonus For Qualified AMTs Starting pay of $30/hr pay increases with years of experience Employer-Paid Life Insurance Medical coverage (Starting day one!) Dental/Vision/Life Insurance (Starting day one!) Critical Illness and Accident Insurance Short-Term and Long-Term Disability Insurance 401(k) Enrollment (100% Vested with no employer contributions) 8 Paid Holidays 13 Paid Time Off Days per Year (PTO is earned on an accrual-basis) increasing with tenure Physical Demands The physical demands described here must be met by an employee to successfully perform the essential functions of this job. The employee is regularly required to: talk, hear, see, stand; walk; have use hands and fingers, handle or feel; reach with hands and arms; lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. ATP is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #ATP123

Do you want to be part of an inclusive team that works to develop innovative therapies for patients? Every day, we are driven to develop and deliver innovative and effective new medicines to patients and physicians. If you want to be part of this exciting work, you belong at Astellas! Astellas Pharma Inc. is a pharmaceutical company conducting business in more than 70 countries around the world. We are committed to turning innovative science into medical solutions that bring value and hope to patients and their families. Keeping our focus on addressing unmet medical needs and conducting our business with ethics and integrity enables us to improve the health of people throughout the world. For more information on Astellas, please visit our website at **************** . **Purpose and Scope:** The Disease Mechanism Research team is seeking an exceptional scientific leader versed in state-of-the art methods in oncology research. The ideal candidate should demonstrate deep understanding of cancer biology and provide scientific direction for pre-clinical research in Astellas' Cancer Biology team. The successful candidate will lead a diverse team of scientists to build a deeper understanding of cancer biology in focused cancer indications and advance the Astellas oncology pipeline. **Essential Job Responsibilities:** + Expert knowledge of tumor biology, including cancer cell intrinsic and extrinsic mechanisms leading to disease progression and maintenance + Provide extensive expertise in cancer biology, including model and assay development to support preclinical drug development + Establish key in vitro and ex vivo immuno-oncology assays and models suitable for therapeutic evaluation and mechanistic investigation across the Astellas portfolio + Mentor and support a team of junior researchers to address mechanisms of action and resistance to cancer therapies + Contribute to program development through broad expertise in oncogenic signaling pathways + Manage multiple projects simultaneously and act as a project lead to effectively collaborate cross-functionally with colleagues across the Astellas organization + Effectively communicate with team members to efficiently conduct experiments, articulate experimental details and results with other members of the Astellas research organization, and present research findings and recommendations to senior leadership **Qualifications Required:** + PhD and post-doctoral training in cancer biology, cancer immunotherapy or a closely related fields with a minimum of 7+ years postdoctoral experience in an academic or industry setting + Experience and strong interest in cancer therapy and/or immuno-oncology research + Demonstrated expertise in solid tumor biology and tumor model development + Proven ability to drive innovative research strategies and deliver results + Recognized leadership in mentoring talent, establishing best practices, and ensuring experimental rigor + Excellent verbal, written, and interpersonal communication skills are essential + Strong work ethic with a dedicated mindset of proactively identifying and productively filling gaps **Preferred:** + Understanding of novel modalities in cancer therapeutics including but not limited to targeted protein degradation, ADC and bispecific T cell engager platforms + Knowledge of methodologies employed in tumor metabolism research + Experience in multicellular in vitro models **Working Environment:** + This position is based in South San Francisco (West Coast Innovation Center) and will require on-site work. **Salary Range** : $140,000 - $220,000 (Final compensation will be determined based on a variety of factors, including but not limited to skills, experience and organizational equity considerations) **Benefits** : + Medical, Dental and Vision Insurance + Generous Paid Time Off options, including Vacation and Sick time, plus national holidays including year-end shut down + 401(k) match and annual company contribution + Company paid life insurance + Annual Corporate Bonus and Quarterly Sales Incentive for eligible positions + Long Term Incentive Plan for eligible positions + Company fleet vehicle for eligible positions + Referral bonus program \#LI-TR1 Category Cancer Biology Astellas is committed to equality of opportunity in all aspects of employment. EOE including Disability/Protected Veterans

Wilson Utility Helicopters has immediate opening for a Base/Field Helicopter Mechanic to support the power line construction helicopter operations in the field and at our Maintenance Facility in Acampo California. Prior Bell 407 and/or Bell 205A++ experienced applicants may be offered a direct 14/14 schedule. Job Requirements: 5 years Total Helicopter Maintenance 2 years of Bell 407 4 Year of Bell 205A++ Experience 2 year of Helicopter Field Maintenance preferred A&P (IA a plus) Familiarity with MS Word, Excel and Outlook Favorable Consideration to: Bell 407 Factory School or Equivalent Bell 205 /212 Maintenance Training Able to obtain a CDL/Hazmat/tanker Mechanics who live in Northern CA Other requirements: Must be willing to travel Must be willing to learn and operate Aeronet (Maintenance Tracking Software) Must be able to establish a safe working relationship with co-workers Must be capable of managing time, work load and parts in field operations Compensation is commensurate with experience and skills. Excellent benefits package including 401K and employer paid medical. Wilson Utility Helicopters is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Alcohol and drug free environment. Successful candidates will be required to pass post-offer and random drug tests. Travel:Yes

Aircraft Maintenance Technician (AMT) IMMEDIATELY HIRING! Helicopter Mechanic FULL-TIME Opportunity in McClellan, CA * Starting Salary: $73,554-$107,281 annually (including 15% geo modifier) * IA Stipend 2,080 * Sign-On Bonus 12,500 We're hiring an Aircraft Maintenance Technician (AMT) responsible for the overall maintenance and safety of our fleet within Reach Air Medical Services. This technician will be qualified to support our H125, H130, H135, EC145 airframe. This is a key role to ensure our team can safely maintain and deliver timely and high-quality transportation services, care and customer service to patients. Responsibilities * Aircraft Maintenance Technician will perform maintenance services including mechanical inspections, screening, repairs and provide regular statuses to the Lead Technician. * Manage inventory checks to ensure stock of supplies and equipment, regularly update the equipment tracking log, place replacement requests when necessary and document part expenditures. * Clearly document service paperwork and FAA information as required and adhere to policies and procedures while complying with the company's information security standards. * Take pride in sustaining a safe and clean working environment for the aircraft maintenance team and flight crew. * Use appropriate communication methods to help facilitate coordination of efforts between departments, vendors and team members. * Work collaboratively and in a professional manner with all allied health and public safety personnel as well as your fellow AMTs and operations team. Minimum Required Qualifications * Three (3) years turbine powered helicopter experience * Valid Airframe and Powerplant (A&P) license * Valid State issued Driver's license * High School diploma or GED equivalent * Federal Aviation Regulations knowledge * EMS Systems, Aircraft maintenance systems, records and maintenance support and planning * Ability to work a flexible schedule including overtime and 24/7 on-call rotations. * Must be acceptable in accordance with the FAA drug and alcohol testing program. * Must be able to push and/or pull 100+ lbs. * Must be able to lift and/or carry up to 50 lbs. Preferred Qualifications * AS350, EC130, EC135, EC145 maintenance experience * FAA Inspection Authorization Certificate * Related experience under CFR Parts 91, 135 and 145 * Autopilot maintenance experience * Avionics and electrical repair experience Why Choose REACH? As a quality air medical transport service, REACH is one of Global Medical Response's (GMR) family of solutions. Our GMR teams deliver compassionate, quality medical care, primarily in the areas of emergency and patient relocation services. View the stories on how our employees provide care to the world at ************************* Learn how our values are at the core of our services and vital to how we approach care and check out our comprehensive benefit options at GlobalMedicalResponse.com/Careers. EEO Statement Global Medical Response and its family of companies are an Equal Opportunity Employer, which includes supporting veterans and providing reasonable accommodations for individuals with a disability. Check out our careers site benefits page to learn more about our benefit options. R0049278

Join us and make YOUR mark on the World! Lawrence Livermore National Laboratory (LLNL) has turned bold ideas into world-changing impact advancing science and technology to strengthen U.S. security and promote global stability. Our mission spans four critical national security areas nuclear deterrence, threat preparedness, energy security, and multi-domain defense empowering teams to take on the toughest challenges of today and tomorrow. With a culture built on innovation and operational excellence, LLNL is a place where your expertise can make a real impact. Job Description We have an opening for a Boiler & Pressure Systems Mechanic II. You will install, operate, maintain, and repair a combination of packaged boilers and pressure systems associated with building heating HVAC (heating hot water and low-pressure steam), process steam, related operating systems, and utilities of LLNL plant and research facilities. You will work independently and interact as a member of a multi-disciplinary team. This position is in the Infrastructure Maintenance and Utilities Department. This position requires full-time on-site presence due to the nature of the work. You will Perform journey-level boiler technician work including troubleshooting, installation, operations/operator, and maintenance and repair of hot water boilers, low-pressure steam boilers, thermal fluid systems, medium pressure steam generating equipment (including ASME Section l steam boilers), Low NOx burners, and related systems and components; to include combustion tuning, Burner Management System programming, and steam boiler water treatment testing. Install, operate, maintain, and repair a wide variety of mechanical and electrical equipment using materials, power tools, hand tools, and specialty tools applicable to the trade. Provide effective customer service and communication necessary to interact effectively with a multi-disciplinary team, including peers, supervisors, customers, ES&H (Environmental, Safety, and Health) technicians, and other crafts personnel. Analyze complex data and prepare logs (boiler and water treatment), standard reports, permit requirements, deficiency forms, and preventive maintenance work requests. Use a computer and hand-held electronic device for completing daily work orders, time reporting and web-based training. Work scheduled and emergency overtime. Perform all assignments in accordance with ES&H, security, and business practice requirements and policies. Perform other duties as assigned. Qualifications Ability to secure and maintain a U.S. DOE Q-level security clearance which requires U.S. Citizenship. High School Diploma, GED or equivalent. Completion of an apprenticeship training program and/or significant equivalent journey- to advanced- level experience working with a combination of commercial packaged hot water and steam boilers as well as low and high-pressure steam systems. Intermediate to advanced skills, knowledge, and experience related to troubleshooting, operating and maintaining steam boilers, hot water boilers, thermal fluid heaters, and related systems, (e.g. expansion tanks, pumps, valves, water treatment, PLC based burner management systems, and electrical components) including basic electrical knowledge for AC circuits and DC circuits. Experience using hand tools, power tools and instruments of the trade such as Combustion Analyzer, Manometer, electrical metering, and circuit testing equipment, as well as experience using water treatment testing equipment. Demonstrated effective interpersonal, verbal, and written communication skills necessary to interact with a multidisciplinary workforce and customer base and customer service skills and ability to work independently as well as in a cross-functional team. Ability to become medically qualified to wear respiratory and other protective equipment and perform moderate work while wearing full-face or half-mask respirators. Experience applying and following state and federal safety regulations and demonstrated ability to obtain and maintain required training and certifications including Competent Worker or equivalent qualifications. Demonstrated basic computer skills with hand-held electronic devices necessary to complete work orders, time reporting, and web-based training. Valid California driver's license and ability to work scheduled, on-call, and emergency overtime. Pay Range $48.76 - $59.27 Hourly This position is under a Collective Bargaining Agreement and step structure. Step placement will be determined after your qualifications are fully assessed during the interview process. Additional Information #LI-Onsite Position Information This is a Career Indefinite position, open to Lab employees and external candidates. Why Lawrence Livermore National Laboratory? Included in 2026 Best Places to Work by Glassdoor! Flexible Benefits Package 401(k) Relocation Assistance Education Reimbursement Program Flexible schedules (*depending on project needs) Our values - visit ***************************************** Site 300 Site 300 is an experimental test site operated by LLNL. Situated on 7,000 acres in rural foothills approximately six miles southwest of downtown Tracy and 15 miles southeast of Livermore, Site 300 hosts approximately 200 employees with expertise in such fields as engineering, chemistry, biology, and environmental restoration. Employees assigned to work at Site 300 may be exposed to the organism that causes San Joaquin Valley Fever (coccidioidomycosis ). Security Clearance This position requires a Department of Energy (DOE) Q-level clearance. If you are selected, we will initiate a Federal background investigation to determine if you meet eligibility requirements for access to classified information or matter. Also, all L or Q cleared employees are subject to random drug testing. Q-level clearance requires U.S. citizenship. Davis Bacon Act The Laboratory performs a variety of work, including some that may fall under Davis Bacon Act requirements. When work scope falls under this Act, the Laboratory complies with the prevailing wage requirements. Pre-Employment Drug Test External applicant(s) selected for this position must pass a post-offer, pre-employment drug test. This includes testing for use of marijuana as Federal Law applies to us as a Federal Contractor. Wireless and Medical Devices Per the Department of Energy (DOE), Lawrence Livermore National Laboratory must meet certain restrictions with the use and/or possession of mobile devices in Limited Areas. Depending on your job duties, you may be required to work in a Limited Area where you are not permitted to have a personal and/or laboratory mobile device in your possession. This includes, but not limited to cell phones, tablets, fitness devices, wireless headphones, and other Bluetooth/wireless enabled devices. If you use a medical device, which pairs with a mobile device, you must still follow the rules concerning the mobile device in individual sections within Limited Areas. Sensitive Compartmented Information Facilities require separate approval. Hearing aids without wireless capabilities or wireless that has been disabled are allowed in Limited Areas, Secure Space and Transit/Buffer Space within buildings. Pre-Placement Medical Exam A job related pre-placement medical examination may be required. How to identify fake job advertisements Please be aware of recruitment scams where people or entities are misusing the name of Lawrence Livermore National Laboratory (LLNL) to post fake job advertisements. LLNL never extends an offer without a personal interview and will never charge a fee for joining our company. All current job openings are displayed on the Career Page under “Find Your Job” of our website. If you have encountered a job posting or have been approached with a job offer that you suspect may be fraudulent, we strongly recommend you do not respond. To learn more about recruitment scams: ***************************************************************************************** Equal Employment Opportunity We are an equal opportunity employer that is committed to providing all with a work environment free of discrimination and harassment. All qualified applicants will receive consideration for employment without regard to race, color, religion, marital status, national origin, ancestry, sex, sexual orientation, gender identity, disability, medical condition, pregnancy, protected veteran status, age, citizenship, or any other characteristic protected by applicable laws. Reasonable Accommodation Our goal is to create an accessible and inclusive experience for all candidates applying and interviewing at the Laboratory. If you need a reasonable accommodation during the application or the recruiting process, please use our online form to submit a request. California Privacy Notice The California Consumer Privacy Act (CCPA) grants privacy rights to all California residents. The law also entitles job applicants, employees, and non-employee workers to be notified of what personal information LLNL collects and for what purpose. The Employee Privacy Notice can be accessed here.

The Los Rios Community College District is seeking qualified candidates for this part-time, temporary (Adjunct) faculty position. This position is filled on an as needed basis and is an on-going recruitment effort. Applicants are contacted/hired year-round for assignments based on college needs. This pool is open continuously and refreshed every two years. Applicants in this pool will remain active for two years. After two years applicants will receive an email with information on how to remain in the pool. The adjunct faculty member shall be responsible for the following:teaching assigned classes under the supervision of the area dean; helping students fulfill their maximum potential in mastering course content; assessing student learning outcomes; maintaining a thorough and up-to-date knowledge in their regular teaching field; continuing professional development; utilizing current technology in the performance of job duties; maintaining standards of professional conduct and ethics appropriate to the professional position; assisting with articulation and curriculum development and review; serving on college committees and participating in faculty governance including accreditation and student co-curricular activities; assuming other responsibilities as assigned by the area dean; fulfilling other duties and responsibilities of an adjunct faculty member. In addition, the adjunct faculty member will also work closely with the Department Chair in order to keep the approved programs current with FAA regulations and to maintain required documentation. Position Salary Information: Initial maximum salary placement is based on academic degree, upper/graduate level units earned, and/or related professional occupational experience per the Los Rios College Federation of Teachers Contract(the initial maximum placement is Class V, Step 1). For more information on the step placement process, pleaseclick here. Typical Duties The instructional assignment may encompass teaching courses across all levels in this discipline. Courses for this assignment may include: * AMTP 200 - Certificated Aircraft Mechanic Preparation * AMTP 310 - Powerplant Theory and Maintenance Fundamentals - Reciprocating * AMTP 311 - Powerplant Overhaul Applications - Reciprocating Engines * AMTP 312 - Powerplant Theory - Turbine Engine Fundamentals To view a complete list of courses for this discipline, please visit the Programs and Majors webpage for the specific campus: * ARC Programs and Majors * CRC Programs and Majors * FLC Programs and Majors * SCC Programs and Majors Minimum Qualifications * Have any bachelor's degree or higher and two years of experience as an FAA certificated aircraft mechanic; OR any associate degree and six years of experience as an FAA certificated aircraft mechanic; OR the equivalent*. Professional experience is required when the applicant possesses a master's degree. The professional experience required must be directly related to the faculty member's teaching assignment. All degrees must be from an accredited institution completed by time of hire. * Possess and maintain a current Federal Aviation Administration Mechanic certificate or an Airframe and Powerplant certificate by time of hire. * Have an equity-minded focus, responsiveness, and sensitivity to and understanding of the diverse academic, socioeconomic, cultural, disability, gender identity, sexual orientation, and ethnic backgrounds of community college students, including those with physical or learning disabilities as it relates to differences in learning styles; and successfully foster and support an inclusive educational and employment environment. * NOTES: * Degree titles must match the stated minimum qualifications exactly(word-for-word). If your degree title is not exactly the sameas one of the degree titles listed in the minimum qualifications above, you mustsubmit documentation for "equivalency" to be considered for the position. If you fail to submit this documentation and your degree title does not match, you will be disqualified. * Applicants applying under the "equivalent" provisionmustinclude the equivalency review request form detailing and explaining how their academic preparation and/or professional experience is the equivalent of the degree(s) listed in the minimum qualifications. Please visit our website for the form and information on theequivalency determination process. * If you have already been granted equivalency for this discipline, you must attach a copy of your determination form or letter. If you do not attach a copy of your determination form or letter you will be disqualified.If you have misplaced your copy please contact Human Resourcesfor assistance. Application Instructions Applicants applying to this position are REQUIRED to complete and submit: * A Los Rios Community College District Application * Letter of Interest * ResumeorCurriculum Vitae * Unofficial Transcripts from College/University and/or Foreign Transcript Evaluation (see additional instructions) ADDITIONAL INSTRUCTIONS: * Applications submitted without all requireddocuments listed above will be disqualified. * Applications submitted with additional materials NOT requested, will be disqualified. * Only information (education, experience, etc.) listed on the application will be considered for minimum qualifications. * Applicants indicating "see resume" on the application will not have that referenced experience considered for minimum qualifications, which may lead to the application being disqualified. * ONLY copies of transcripts from a US College/University or Foreign Transcript Evaluation will be accepted. Please DO NOTinclude any foreign transcripts. * Individuals who have completed college/university course work at an institution in a country other than the United States must obtaina complete evaluationof foreign transcripts, degrees, and other relevant documents, even if the foreign document has been accepted by another college/university in the United States. * Foreign transcript evaluations are ONLYaccepted from AICE (Association of International Credential Evaluations, Inc.) or NACES (The National Association of Credential Evaluation Services) agencies or evaluators. For additional information on foreign transcript evaluations click here. * Graduate advising documents, certificate of degrees, diplomas, and grade reports will not be accepted as transcripts. Do not submit additional materials that are not requested.

Do you want to be part of an inclusive team that works to develop innovative therapies for patients? Every day, we are driven to develop and deliver innovative and effective new medicines to patients and physicians. If you want to be part of this exciting work, you belong at Astellas! Astellas Pharma Inc. is a pharmaceutical company conducting business in more than 70 countries around the world. We are committed to turning innovative science into medical solutions that bring value and hope to patients and their families. Keeping our focus on addressing unmet medical needs and conducting our business with ethics and integrity enables us to improve the health of people throughout the world. For more information on Astellas, please visit our website at ***************** Purpose and Scope: The Disease Mechanism Research team is seeking an exceptional scientific leader versed in state-of-the art methods in oncology research. The ideal candidate should demonstrate deep understanding of cancer biology and provide scientific direction for pre-clinical research in Astellas' Cancer Biology team. The successful candidate will lead a diverse team of scientists to build a deeper understanding of cancer biology in focused cancer indications and advance the Astellas oncology pipeline. Essential Job Responsibilities: Expert knowledge of tumor biology, including cancer cell intrinsic and extrinsic mechanisms leading to disease progression and maintenance Provide extensive expertise in cancer biology, including model and assay development to support preclinical drug development Establish key in vitro and ex vivo immuno-oncology assays and models suitable for therapeutic evaluation and mechanistic investigation across the Astellas portfolio Mentor and support a team of junior researchers to address mechanisms of action and resistance to cancer therapies Contribute to program development through broad expertise in oncogenic signaling pathways Manage multiple projects simultaneously and act as a project lead to effectively collaborate cross-functionally with colleagues across the Astellas organization Effectively communicate with team members to efficiently conduct experiments, articulate experimental details and results with other members of the Astellas research organization, and present research findings and recommendations to senior leadership

5K Sign On Bonus For Qualified AMTs About Us ATP is the nation's largest flight school, providing students with the most efficient path to a successful airline pilot career. For over 40 years, ATP has been the leader in professional flight training and supplying pilots to regional and major airlines. Why you'll love working for us No shift work…ever! Monday - Friday day shift only Work with the best and brightest on new Cessna 172s, Piper Archers and Piper Seminoles A fleet size of over 650 aircraft Supportive team culture built around safety-focused decision making Well-equipped facilities with abundant resources (parts, tech data, support, etc.) The role The Aircraft Mechanic role works as a member of a team performing everything from light maintenance to heavy structural repairs on our fixed-winged aircraft. The right candidate will possess a results-driven mindset and the collaborative spirit necessary to ensure efficient workflow while keeping safety and quality as non-negotiable top priorities. Responsibilities Perform efficient troubleshooting, aircraft maintenance, and repairs in accordance with applicable aviation regulations, manufacturer's instructions, and company policies on our single engine and multi-engine piston powered flight training aircraft. Ensure consistent, accurate aircraft maintenance records by properly documenting & completing required forms, computer entries, and logbook entries. Follow all policies and procedures Keep a clean and orderly work environment Perform job duties in a safe manner Perform other duties as assigned Qualifications Airframe and Powerplant (A&P) Certificate 2 or more years of piston-powered aircraft maintenance experience Knowledge and understanding of Federal Aviation Regulations and manufacturer manuals Possess adequate tools FAA Inspection Authorization (preferred not required) Private pilot's license (preferred not required) Avionics troubleshooting experience with Garmin integrated avionics (preferred not required) Benefits ATP offers a comprehensive employee benefits program, including: 5K Sign On Bonus For Qualified AMTs Starting pay of $30/hr pay increases with years of experience Employer-Paid Life Insurance Medical coverage (Starting day one!) Dental/Vision/Life Insurance (Starting day one!) Critical Illness and Accident Insurance Short-Term and Long-Term Disability Insurance 401(k) Enrollment (100% Vested with no employer contributions) 8 Paid Holidays 13 Paid Time Off Days per Year (PTO is earned on an accrual-basis) increasing with tenure Physical Demands The physical demands described here must be met by an employee to successfully perform the essential functions of this job. The employee is regularly required to: talk, hear, see, stand; walk; have use hands and fingers, handle or feel; reach with hands and arms; lift and/or move up to 10 pounds and occasionally lift and/or move up to 25 pounds. ATP is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. #ATP123