Builders FirstSource jobs in Richmond, VA - 45 jobs

PURPOSE Under general supervision performs routine loading and unloading of materials within yard or work site; assembles load packages into truck for delivery to customer job sites. ESSENTIAL DUTIES AND RESPONSIBILITIES Loads and unloads materials onto or from pallets, trucks or customer vehicles and installs strapping, bracing or padding to prevent shifting or damage in transit. Performs load-building, determining the appropriate weight, composition, and placement of load based on customer order and capacity of delivery vehicle to ensure load is balanced and safe for hauling. Reads work order or follows oral instructions to determine materials to be moved or loaded. Conveys materials to or from storage to designated area using hand truck, electric dolly, forklift or other device. Opens containers, units, slings and loads, using steel cutters, crowbar, claw-hammer or other hand tools. Attaches identifying tags or labels to materials or marks information on cases, bales or other containers so as to provide for correct identification of items. Understands and observes all safety procedures and practices in order to prevent injury to self or co-workers; attends periodic safety meetings as required; may recommend changes to improve safety procedures. Other duties may be assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. High school diploma or General Education Degree (GED) and three (3) months experience performing these or similar tasks; or equivalent combination of education and experience. Forklift certification required. COMPETENCIES Requires forklift operator certification Knowledge of company products sufficient to take into account weight, shape and handling requirements Ability to read and write to handle work orders and labeling tasks Manual dexterity Ability to use simple hand tools Knowledge of safety procedures while performing forklift driving and materials handling tasks Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions Ability to count items and verify against prepared lists. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed within a production or yard environment, subject to temperature variations, hazardous chemicals, mechanical parts, equipment noise and dust. Must be able to lift and carry up to 25 pounds frequently and on occasion up to 80 pounds. May be required to perform specific tasks that involve climbing, lifting, pushing or kneeling.

**Preferred Qualifications** + Prior experience working in multiple departments in a distribution center. + Previous experience operating material handling equipment. + Ability to understand written material. Works in multiple departments within a distribution center, including case pick, shipping, receiving, returns, loading, order processing, and replenishment. Operates material handling equipment to move inventory within the facility. **Major Tasks, Responsibilities, and Key Accountabilities** + Uses material handling equipment to locate and deliver products, supplies, and equipment to designated areas. + Assists with staging and loading orders into trucks for customer delivery. + Verifies quantity and quality of incoming products from vendors and distribution centers. + Uses packing list information to collect items for customer orders, including building and wrapping pallets of products. + Examines and inspects stock items for wear and defects and notifies management of inventory issues. + Returns misplaced products to proper storage areas. + Maintains a clean working environment in accordance with company safety policies. + Performs inventory control functions as needed. **Nature and Scope** + Refers complex, unusual problems to supervisor. + Under general supervision, exercises some judgment in accordance with well-defined policies, procedures, and techniques. Work typically involves regular review of output by a senior coworker or supervisor. **Work Environment** + Typically located in a comfortable environment but with regular exposure to factors that may cause noticeable discomfort or a moderate risk of accident or illness, such as temperature extremes, moving machinery, loud noises, and fumes. + Ability to lift and carry up to 50 pounds in a physical environment. Ability to stand for periods of time up to and exceeding 60 minutes. Ability to make repetitive movements, such as using a 10-key or calculator, bending, or squatting. + No travel required. **Education and Experience** + HS Diploma or GED strongly preferred. Specialized skills training/certification may be required. Generally 2-5 years of experience in area of responsibility. **Our Goals for Diversity, Equity, and Inclusion** We are committed to creating a culture that promotes equity, respect, and advocacy for every HD Supply associate. We value the diversity of our people. **Equal Employment Opportunity** HD Supply is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. HD Supply is an Equal Opportunity Minority/Female/Individuals with Disabilities/Protected Veteran and Affirmative Action Employer. HD Supply considers for employment and hires qualified candidates without regard to age, race, religion, color, sex, sexual orientation, gender, gender identity, national origin, ancestry, citizenship, protected veteran or disability status or any factor prohibited by law.

**Preferred Qualifications** + Bachelor's degree in business administration or a related field. + Business-to-Business sales experience including experience using various sales techniques such as Consultative or Solution Based Selling. + Proficiency with Salesforce. **Job Summary** Exceeds sales and profit targets in a designated territory by implementing sales and marketing programs and establishing both short and long-term sales strategies. Drives growth by securing profitable new accounts through industry research, networking, and proactive prospecting. This position requires operation of a company vehicle, or a personal vehicle and such operation is done consistently more than 50% of the average work week. If selected for this position, the company will run a Motor Vehicle Record (MVR) report. A requirement of this position is an acceptable MVR report. **Major Tasks, Responsibilities, and Key Accountabilities** + Manages sales and customer retention initiatives efficiently to enhance overall sales performance, profitability, and customer satisfaction, while also overseeing the planning, forecasting, and reporting of sales activities and competitive pricing tactics. + Generates a strategic sales call schedule and engages in face-to-face customer visits to identify vital opportunities and enhance sales revenue through the promotion of value-added solutions, skillfully navigating objections, and adversities. + Identifies, develops, and maintains a pipeline of qualified, managed accounts to meet or exceed total sales and margin plan using a company designated customer relationship manager tool. + Focuses on new account opportunities by utilizing effective cold call strategies to facilitate territory account growth opportunities. + Implements approved sales strategies to achieve targeted sales outcomes and foster valuable customer relationships, all while maintaining industry-specific product knowledge and a deep understanding of specialized services to effectively cater to client accounts. + Utilizes Salesforce reporting and data analysis to identify opportunities within territory for sales and revenue growth objectives. + Reviews customer portfolio to identify and drive action with underperforming accounts. + Collaborates with inside sales to support business growth and development. **Nature and Scope** + Identifies key barriers/core problems and applies problem solving skills in order to deal creatively with complex situations. Troubleshoots and resolves complex problems. Makes decisions under conditions of uncertainty, sometimes with incomplete information, that produce effective end results. + Independently performs assignments with instruction limited to the expected results. Determines and develops an approach to solutions. Receives technical guidance only on unusual or complex problems or issues. + May oversee the completion of projects and assignments, including planning, assigning, monitoring and reviewing progress and accuracy of work, evaluating results, etc. Contributes to employees' professional development but does not have hiring or firing authority. **Work Environment** + Located in a comfortable indoor area. Any unpleasant conditions would be infrequent and not objectionable. + Most of the time is spent sitting in a comfortable position and there is frequent opportunity to move about. On rare occasions there may be a need to move or lift light articles. + Typically requires overnight travel less than 10% of the time. **Education and Experience** + Typically requires BS/BA in a related discipline. Generally 5-8 years of experience in a related field OR MS/MA and generally 3-5 years of experience in a related field. Certification is required in some areas. **Our Goals for Diversity, Equity, and Inclusion** We are committed to creating a culture that promotes equity, respect, and advocacy for every HD Supply associate. We value the diversity of our people. **Equal Employment Opportunity** HD Supply is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status. HD Supply is an Equal Opportunity Minority/Female/Individuals with Disabilities/Protected Veteran and Affirmative Action Employer. HD Supply considers for employment and hires qualified candidates without regard to age, race, religion, color, sex, sexual orientation, gender, gender identity, national origin, ancestry, citizenship, protected veteran or disability status or any factor prohibited by law.

General Mills is now hiring a part-time retail sales associate to be an in-store brand ambassador for Edgard & Cooper Pet Food! Edgard & Cooper (E&C) is an exciting NEW pet food brand in the U.S. This European brand was acquired by General Mills in 2024 because of their philosophy on sustainable, delicious and healthy pet food. We are looking for a passionate pet sales associate to provide educational and engaging in-store pet parent experience, to recommend the best E&C nutrition for their pet(s). Day 1 Benefits: * Competitive hourly pay - $17/hr * 401K * Paid training * Set schedule between 9 to 18 hours; maximum 20 hours * Wellness programs * Pet food reimbursement * Pet adoption reimbursement What a typical day will look like: Pet enthusiast, ready to tell the Edgard & Cooper story mainly in pet stores but occasionally at local events. Connect with pet parents and store associates through a personalized approach engaging in conversation about their pets. Actively listen to utilize product knowledge and latest promotions to recommend the best E&C nutrition for their pet(s). Record sales and insights from the day to enhance the pet and pet parent experience. Minimum Requirements: * 18+ years old * Must reside within 25 miles of designated location * Have reliable transportation and willing to drive to locations designated by your manager within a 25-mile radius * Available to work on weekends (Saturdays and Fridays and/or Sundays) * Comfortable and confident engaging with pet parents and store associates * Must be physically able to lift 30lbs and move around the store for up to 4 hours * Have an active email account and access to a computer * Smart phone preferred So, if a work environment engaging with other pet lovers is exciting, join us in building the Edgard & Cooper brand in the U.S. Reasonable Accommodation Request If you need to request an accommodation during the application or hiring process, please fill out our online accommodations request form by following this link: Accommodations Request.

ARE YOU A CURRENT US FOODS EMPLOYEE? PLEASE APPLY DIRECTLY THROUGH OUR INTERNAL WORKDAY CAREER SITE Join Our Community of Food People! BECOME A US FOODS DRIVER! Ready to build a career with a company that's leading the foodservice industry? Our CDL A Delivery Truck Drivers start at $24.50 an hour + Incentive pay! We are looking for Delivery Truck Drivers who relish the chance to push their potential, grow and reap the rewards of joining the US FOODS family. We help YOU make it! US FOODS is one of the largest food distributors with a culture and history of promotion from within and unlimited career growth opportunities w/ ongoing job skills and leadership development training. US FOODS has a lot to offer: Home Every Night with local routes Work Schedule Monday- Friday starting in the early morning until finished US FOODS is the company built on YOU Matter, where your hard work is rewarded We are committed to compensation, benefits that respect, and reward our employees for their dedication and hard work Excellent Leadership Service recognition and employee rewards BENEFITS START DAY ONE: medical, dental, vision, 401(k) Plan and Employee Stock Purchase Plan (ESPP) life insurance and paid parental leave. Check out our Benefits by clicking on the link Health Plan Identifier (benefitspricing.com) Main Ingredients of the Job As a US FOODS Delivery Truck Driver you will be critical to the US FOODS team and one of the important faces of our organization. As a delivery truck driver, you will have an impact on our customers by delivering our meats, produce, frozen goods, groceries, dry goods, equipment, and supplies to their drop-off sites. Your efforts are the foundation that defines US FOODS success based on our pillars of cultural beliefs, work ethic, collaborative spirit, and service. Deliver best-in-class Customer Service. Deliver customer's orders to meet scheduled delivery times and keep productivity. Unload products with a hand truck and place items in customer storage area. Able to perform repeated, manual heavy lifting of items up to 80 pounds. Make frequent stops during a work shift. Deliver product in inclement weather conditions. Verify delivery of items with customers. Collect money (cash or checks) where needed. What you bring to the table Must be at least 21 years of age. Must have valid CDL A issued by the state of legal residence with necessary endorsements and DOT (Department of Transportation) qualified. Minimum six months commercial truck driving experience or three months of foodservice or food and beverage truck delivery experience required. Great delivery truck drivers are crucial to the US Foods team and one of the important faces of our organization. Our truck drivers strive for integrity and reliability, while building trusting relationships with customers. JOIN OUR TRANSPORTATION TEAM! Please check out our job preview video: "A Day in the life" Delivery Truck Driver ***************************************************** *Registering to the FMCSA Clearinghouse is a requirement by the Department of Transportation. All Truck Drivers must visit the Clearinghouse website and register to the new database. The Clearinghouse is a secure online database that provides real-time information about commercial driver's license (CDL) and commercial learner's permit (CLP) holders' drug and alcohol program violations. If you have not registered to the FMCSA database, please note registration is required. Please visit ******************************************** and click GO to login. If you can log into login, but are having trouble with the Clearinghouse registration, see “Clearinghouse Help” field on the clearinghouse page. Compensation depends on relevant experience and/or education, specific skills, function, geographic location, and other factors as applicable by law. The expected base rate for this role is between $24.00 and $26.00. This role will also receive incentive compensation. Benefits for this role may include health insurance, pre-tax spending accounts, retirement benefits, paid time off, short-term and long-term disability, employee stock purchase plan, and life insurance #LI-AS2 ***EOE - Race/Color/Religion/Sex/Sexual Orientation/Gender Identity/National Origin/Age/Genetic Information/Protected Veteran/Disability Status***

PURPOSE Gain industry and organizational knowledge through daily business interactions and job assignments. Work is performed under direct supervision. Our DoD SkillBridge Internship is open for all active-duty service members within the last 180 days of their service contract with commanding officer approval. ESSENTIAL DUTIES AND RESPONSIBILITIES Assists with various projects in support of the department May perform duties such as gathering and organizing data to provide information for departmental special projects or reports. Participate in team meetings and brainstorming sessions. May work with cross-functional teams to achieve project goals. SUPERVISORY RESPONSIBILITIES Will be dependent on the internship positions selected for. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Must be active-duty military in good standing with the DoD within the last 180 days of service contract. Must receive commanding officer approval to participate. COMPETENCIES Strong oral, written, and communication skills Ability to work well with diverse groups of people Comfortable talking with and interacting with others Knowledgeable in Microsoft Office and Outlook WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work may be in an office or on the job site setting and generally sedentary, but position may involve walking or standing for brief periods of time. May be required to occasionally lift, carry, push, pull or otherwise move objects up to 80 pounds. * This is an unpaid, non-benefit eligible internship position in partnership with the DoD SkillBridge program.

PURPOSE This individual is responsible for creating designs and drawings prepared directly from information submitted on a company order form, client's customer selection sheet, repeated from previous jobs, or from information developed by a design manager. ESSENTIAL DUTIES AND RESPONSIBILITIES Collaborate with outside sales personnel and customers to accurately complete, safe and quality structures. Assures stability, deflection and load carries in a manner that will meet or surpass codes associated with each project. Follow quality control procedures for completeness, accuracy, and code compliance for the implementation of design standards. Confers with client, technical staff, and other Design Services personnel, and prepares design modifications as required. Develop and complete design details from original concept drawings and prepare layouts. Draws rough sketches or arranges for finished drawings or photographs to illustrate specified materials or assembly sequence. Writes technical descriptions specifying material qualities and properties. Review design(s) for most efficient and profitable use of inventory, equipment, and labor as time permits. Demonstrate a commitment to the quality improvement process and the philosophy of continuous improvement. Other Duties as assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Associate's degree (A. A.) or equivalent from two-year college or technical school; or six months to one-year related experience and/or training; or equivalent combination of education and experience. COMPETENCIES Preferably experience with PrimeCad, MS Word, MS Excel, and AutoCAD Ability to read, analyze, and interpret common scientific and technical journals, financial reports, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community. Ability to write speeches and articles for publication that conform to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Ability to work with mathematical concepts such as probability and statistical inference, and fundamentals of plane and solid geometry and trigonometry. Ability to apply concepts such as fractions, percentages, ratios, and proportions to practical situations. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand and sit, and occasionally required to walk. The employee must occasionally lift and/or move up to 50 pounds. Subject to both typical office environment and outside locations with temperature and weather variations. The employee is regularly required to use close vision (clear vision at 20 inches or less) and color vision (ability to identify and distinguish colors). While performing the duties of this job, the employee is subject to quiet conditions, such as those in a library or private office.

**Job ID:** 10322 **Alternate Locations:** **Newell Brands** is a leading consumer products company with a portfolio of iconic brands like Graco , Coleman , Oster , Rubbermaid , Sharpie and Yankee Candle - and 24,000 talented teammates around the world. Our culture is built on values in action: Integrity, Teamwork, Passion for Winning, Ownership, and Leadership. We work together to win, grow, and make a real impact-supported by a high-performing, inclusive, and collaborative environment where you can be your best, every day. The Associate Manager, Tax Incentives & Grants will support the Manager in identifying, understanding, and obtaining government incentives at the local, state, and federal levels. This includes supporting applications for tax credits, grants, and other opportunities such as R&D tax credits, educational programs, and facilities & infrastructure grants. This role requires strong analytical skills and attention to detail to assist in the successful execution of incentive strategies and compliance with regulatory requirements. **Key Responsibilities** + Conduct research on government incentive programs and regulatory requirements, including tax credits, grants, and other programs. + Assist in the preparation and submission of incentive applications and documentation. + Track and monitor the status of incentive applications and compliance with deadlines and requirements. + Compile and analyze data to support incentive applications and reporting. + Maintain up-to-date records of all incentive-related activities and documentation. + Manage and coordinate tax audits, inquiries, and notices from tax authorities regarding incentive claims. + Assist in preparing reports and presentations for senior management on incentive programs and their impacts. + Collaborate with internal teams to gather necessary information for incentive applications. + Provide administrative support to ensure the smooth functioning of the government incentives function. + Ensure all claims and applications comply with tax regulations and firm standards. This includes preparing and reviewing documentation to support the company's claims. **Qualifications** + Bachelor's degree in business, finance, public administration, economics, or a related field. + 3-5 years of experience in tax incentives, government programs, regulatory affairs, or a related area (internships or co-op experience may be considered). + Strong research and analytical skills with the ability to interpret policy and financial data. + Clear and professional written and verbal communication skills. + Highly organized and detail-oriented, with the ability to manage multiple priorities. + Proficiency in Microsoft Office Suite (Excel, Word, PowerPoint); familiarity with data tools or ERP systems is a plus. + Self-starter with the ability to work independently and collaboratively in a cross-functional environment. Newell Brands (NASDAQ: NWL) is a leading global consumer goods company with a strong portfolio of well-known brands, including Rubbermaid, Sharpie, Graco, Coleman, Rubbermaid Commercial Products, Yankee Candle, Paper Mate, FoodSaver, Dymo, EXPO, Elmer's, Oster, NUK, Spontex and Campingaz. We are focused on delighting consumers by lighting up everyday moments. Newell Brands and its subsidiaries are Equal Opportunity Employers and comply with applicable employment laws. EOE/M/F/Vet/Disabled are encouraged to apply.

PURPOSE Under direct supervision, the Maintenance Technician I is an entry level position and is responsible for conducting machine setup, troubleshooting, repairs, and preventive maintenance service with basic efficiency. They may also be responsible for resolving warranty and non-warranty repairs to damaged products. Performs duties under the direction of the Maintenance Manager and Leads. ESSENTIAL DUTIES AND RESPONSIBILITIES Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. Locates sources of problems by observing mechanical and electrical devices in operation; listening for problems; using precision measuring and testing instruments. Removes defective parts by dismantling devices; using hoists, cranes, and hand and power tools; examining form and texture of parts. Determines changes in dimensional requirements of parts by inspecting used parts; using rules, calipers, micrometers, and other measuring instruments. Adjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges. Controls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance. Fabricates repair parts by using machine shop instrumentation and equipment. Maintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt. Conserves maintenance resources by using equipment and supplies as needed to accomplish job results. Provides mechanical maintenance information by answering questions and requests. Prepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends. Maintains technical knowledge by attending educational workshops; reviewing technical publications; establishing personal networks. Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. Maintains safe and clean working environment by complying with procedures, rules, and regulations. Contributes to team effort by accomplishing related results as needed. Performs building, lighting, and plumping repairs for Facility as needed. Other duties may be assigned Some positions may: Conduct service/repairs, assist with warranty issues, and file warranty reports with vendors. Provide on-site assistance to help troubleshoot and repair product and/or equipment. Plan and coordinate activities concerned with investigating and resolving customer reports of problems. Review performance reports and documentation from customers and sales representatives and inspect malfunctioning or damaged product to determine nature and scope of problem. Analyze review and inspection findings to determine source of problem, and recommend repair, replacement, or other corrective action. Maintain high accuracy in performing service work on product per work order specifications. Provide a communication link between the customer and the Company to help ensure that effective service is provided to the customer. Back up other maintenance technicians as needed. Inform supervisor of any shortages in stock, or of any malfunctions or damage to equipment or vehicles. Help load trucks for delivery and assist in unloading incoming trucks. Restock incoming supplies, keep tools and machinery clean and maintained, and is responsible for all tools assigned to truck. Maintain truck by keeping it clean and organized. Check fluids and tire pressure daily. SUPERVISORY RESPONSIBILITIES This position has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. High school diploma or general education degree (GED); 1 - 2 years of related experience Or equivalent combination of education and experience. Valid driver's license COMPETENCIES Ethical Conduct Problem Solving/Analysis Technical Capacity Attention to detail Knowledge of industry safety practices Knowledgeable in the use of a variety of hand and power tools Language Skills-The ability to read a limited number of two- and three-syllable words and to recognize similarities and differences between words and between series of numbers. The ability to print and speak simple sentences. Reasoning Ability-Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work flexible hours including over time as needed. May be required to drive to other facilities and job sites. Regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl. Frequently required to sit. Occasionally required to climb or balance and talk or hear. Must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 75pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and depth perception Regularly exposed to moving mechanical parts and outside weather conditions. Frequently exposed to fumes or airborne particles and risk of electrical shock. Occasionally exposed to high, precarious places and vibration. The noise level in the work environment is usually moderate

Under general supervision serves as the professional point of contact for specialty product customers by working with clients to coordinate and create design projects including Kitchen and Bath, Millwork, etc., renovations and remodels by evaluating scope of projects, integrating information into design layout and resolving issues. Actively engages in selling company products and services. Consults with customers to determine project requirements by preparing information regarding design, specifications, materials, and estimated costs. Designs plan layout as requested by customer, utilizing blueprints or sketches. May initiate and control specialty orders: purchases, coordinates freight, production, delivery and proper customer invoicing. Coordinates the purchase of needed materials and add-on sales. Makes sales calls in the field to measure, sell, follow-up, etc. as part of providing exceptional customer service. Works with purchasing department and/or appropriate buyers on special orders including creation of purchase orders. High school diploma or General Education Degree (GED) and two (2) years drafting, architectural design or CAD application experience; or equivalent experience and education.

**Job ID:** 11975 **Alternate Locations:** **Newell Brands** is a leading consumer products company with a portfolio of iconic brands like Graco , Coleman , Oster , Rubbermaid , Sharpie and Yankee Candle - and 24,000 talented teammates around the world. Our culture is built on values in action: Integrity, Teamwork, Passion for Winning, Ownership, and Leadership. We work together to win, grow, and make a real impact-supported by a high-performing, inclusive, and collaborative environment where you can be your best, every day. The Senior Manager, General Purpose Robotics Engineering & AI Enablement is responsible for leading the strategy, roadmap, and deployment of general-purpose and humanoid robotic solutions across the enterprise. This leader drives the identification, evaluation, and implementation of robotics use cases that enhance safety, productivity, quality, and cost efficiency in manufacturing, distribution, and corporate environments. While deep technical engineering and solution build will be heavily supported by external automation and technology partners, this role is accountable for owning the overall robotics portfolio, ensuring successful deployment at scale, and serving as the primary point of coordination across business, IT, and vendor teams. **Key Responsibilities** Strategy & Roadmap Ownership + Develop and maintain the multi-year roadmap for general-purpose and humanoid robotics solutions across plants, warehouses, and offices. + Translate business objectives into a prioritized portfolio of robotics initiatives, aligned to safety, operational excellence, and financial targets. + Continuously scan the robotics and automation landscape to identify emerging capabilities, platforms, and partners relevant to the enterprise. Solution Design & Use Case Definition + Lead cross-functional workshops to identify, assess, and refine robotics use cases, with specific emphasis on humanoid and general-purpose robotic applications. + Define functional requirements, success criteria, and high-level solution architectures for robotics deployments in partnership with engineering, IT, safety, and operations. + Ensure solutions are designed with scalability, reliability, and maintainability in mind, leveraging modular platforms and standard practices where possible. Deployment & Program Delivery + Own the end-to-end deployment lifecycle for robotics initiatives-from concept and pilot through scale-up and steady-state operations. + Coordinate site readiness, infrastructure, safety reviews, and change management activities required for successful robot deployment. + Establish clear KPIs and benefits tracking for each deployment; monitor performance and drive continuous improvement in collaboration with operations teams. External Partner & Vendor Management + Serve as the primary owner for relationships with robotics OEMs, system integrators, and automation partners delivering technical solutions. + Oversee partner scopes of work, delivery milestones, and quality standards, ensuring alignment to internal requirements and timelines. + Collaborate with Procurement, Legal, and IT on vendor selection, contracting, performance management, and technology governance. AI Enablement & Data Integration + Work with data, IT, and analytics teams to ensure robotics solutions are integrated into enterprise systems (MES, WMS, ERP, safety systems, etc.). + Guide how AI-enabled capabilities-such as perception, navigation, and task orchestration-are applied through partner solutions to improve robot performance and autonomy. + Promote standardized data collection, monitoring, and reporting from robotic systems to support diagnostics, optimization, and strategic decision-making. Stakeholder Engagement & Change Management + Engage plant leadership, frontline teams, and functional stakeholders to align on use cases, operating models, and ways of working with humanoid and general-purpose robots. + Develop training, communication, and adoption plans to ensure employees understand and effectively collaborate with robotic systems. + Champion a culture of safety and innovation, proactively addressing concerns and promoting the benefits of robotics to the workforce. Governance, Standards & Risk Management + Define and enforce standards for robotics deployments, including safety, cybersecurity, interoperability, and lifecycle management. + Partner with EHS, Security, and IT to ensure humanoid and mobile robots meet all applicable regulatory and internal compliance requirements. + Manage risks associated with robotics deployments, including operational disruption, vendor dependencies, and technology obsolescence. Team Leadership + Lead and develop a small internal team of robotics program managers / engineers focused on requirements, integration, and deployment oversight. + Foster strong collaboration across engineering, IT, operations, and HR to support workforce transformation as robotics adoption scales. **Required Qualifications** - Bachelor's degree in Engineering, Robotics, Mechatronics, Industrial Engineering, Computer Science, or a related field; advanced degree preferred. - 8+ years of experience in industrial automation, robotics, advanced manufacturing, or related fields, with at least 3-5 years in a leadership or program ownership role. - Demonstrated experience leading deployment of robotics solutions (e.g., industrial robots, AMRs, AGVs, humanoid or general-purpose robots) in production or logistics environments. - Proven track record of managing complex, multi-site technology programs and working with external system integrators and technology partners. - Strong understanding of operational processes in manufacturing and/or distribution and how robotics can be applied to improve safety, quality, and productivity. - Ability to translate business needs into functional and technical requirements and to communicate effectively with both technical and non-technical stakeholders. - Excellent stakeholder management, communication, and change management skills, including experience working with frontline and plant leadership teams. - Strong analytical, problem-solving, and organizational skills with the ability to manage multiple projects and deadlines simultaneously. **Preferred Qualifications** - Experience with humanoid robotics platforms, general-purpose robotic systems, or collaborative robots (cobots) in real-world use cases. - Familiarity with AI-enabled capabilities in robotics (e.g., computer vision, SLAM, task planning) delivered via partner solutions. - Experience in large, multi-site industrial or consumer goods environments, or other complex, asset-intensive operations. - Exposure to integration with enterprise systems (e.g., MES, WMS, ERP) and OT/IT environments. If you are passionate about shaping the future of work through general-purpose and humanoid robotics-and about delivering real, measurable value for the business and its people-we encourage you to apply. Newell Brands (NASDAQ: NWL) is a leading global consumer goods company with a strong portfolio of well-known brands, including Rubbermaid, Sharpie, Graco, Coleman, Rubbermaid Commercial Products, Yankee Candle, Paper Mate, FoodSaver, Dymo, EXPO, Elmer's, Oster, NUK, Spontex and Campingaz. We are focused on delighting consumers by lighting up everyday moments. Newell Brands and its subsidiaries are Equal Opportunity Employers and comply with applicable employment laws. EOE/M/F/Vet/Disabled are encouraged to apply.

PURPOSE This is an entry-level position that performs repetitive assembly operations to mass-produce products such as windows, doors, trusses, panels, or stairs by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES Places parts in specified relationship to each other. Bolts, clips, screws, cements, or otherwise fastens parts together. Cut products to specific measurements as needed. Removes defective products as needed. Tends machines to perform force fitting or fastening operations on assembly line. Works at different workstations as production needs require. Works in environment where tasks change as varying models of product are produced. Cleans equipment, floors, and work areas according to safety procedures. Other duties may be assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. There are no requirements in terms of education or experience. Prior carpentry experience helpful. COMPETENCIES Ability to read and comprehend simple instructions. Ability to write simple correspondence. Verbal expression ability to effectively present information, in both individual and small group situations. Ability to add, subtract, multiply, and divide. Ability to read tape measure. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Overtime work could be involved. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is continuously required to stand; use hands to finger, handle, or feel; reach with hands and arms and talk or hear. The employee is continuously required to walk. The employee is occasionally required to climb or balance and stoop, kneel, crouch, or crawl. The employee must continuously lift and /or move up to 25 pounds, frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee is continuously exposed to moving mechanical parts and may be exposed to airborne particles. The employee is frequently exposed to outside weather conditions; extreme cold; extreme heat; risk of electrical shock and vibration. The noise level in the work environment is usually loud. Will be required to wear ear plugs for noise protection as well as eye protection and other personal protective equipment required by the location.

Associate in this position is actively developing the skills and competencies required for the Component Technician/Truss Designer job function. The trainee is expected to complete all phases of the required 16-week intensive training program which consists of online training, classroom training, and hands-on experience. Under the supervision of a design manager, completes all phases of the Truss Designer training program. In partnership with more senior designers, prepares basic roof and/or floor truss designs by reading and interpreting blueprints and conferring with sales and/or customers regarding general details of the job requirement. Computes plan dimensions and enters design parameters and layouts per plan into specialized designing software. Review plans with experienced designers to ensure they are accurate and conform to standards. Produce truss placement layouts for final construction. Provide job site support, with the aid of sales associates or senior designers, when requested. Learn pricing methods and draft bid proposals. Prepare for and take a series of tests required for certification. Upon completion of the 16-week training, DIT is expected to be able to design an accurate, simple one-story structure. Associates degree in a directly related field or equivalent field experience in Construction or Design shops. Prior shop experience and/or construction knowledge strongly preferred. Framing experience is a plus.

PURPOSE Under direct supervision handles and maintains the flow of materials and products on the premises according to established guidelines. ESSENTIAL DUTIES AND RESPONSIBILITIES Physically handles materials used to construct components and finished products to ensure movement of such items is optimized; lifts, carries, stacks items as needed. Operates motorized and non-motorized material handling equipment, some of which may require specialized training. Responds attentively to training from foreman or more senior handlers in order to increase own knowledge of work processes. Understands and observes all safety procedures and practices in order to prevent injury to self or co-workers; attends periodic safety meetings as required; may recommend changes to improve safety procedures. Other duties may be assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. High school diploma or General Education Degree (GED). This is an entry level position where incumbent will receive on-the-job training. COMPETENCIES Knowledge of and ability to use motorized and non-motorized material handling equipment Manual dexterity Knowledge of safety procedures while performing materials handling tasks Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed within a production environment, subject to temperature variations, hazardous chemicals, mechanical parts, increased noise levels and dust. Must be able to lift and carry up to 25 pounds frequently and on occasion up to 80 pounds. May be required to perform specific tasks that involve climbing, lifting, pushing or kneeling.

PURPOSE Works with client to manage installation projects by performing the following duties personally or through subordinate supervisors. ESSENTIAL DUTIES AND RESPONSIBILITIES Plans installation projects, establishing priorities and sequences for installed products. Visits job sites before, during, and after installations to ensure quality standards are satisfactory and that project is being completed on time. Confers with client to ensure customer satisfaction with the project and communicates recommendations for improvement to Field Supervisor and/or Installation Manager. Reviews installation orders or schedules to ascertain resources necessary to complete project on time. Reviews reports and resolves problems to ensure minimum costs and prevent installation delays. Develops or revises standard operational and working practices and observes workers to ensure compliance with standards. Compiles, stores, and retrieves production data. Other duties as assigned SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. COMPETENCIES Analytical - Synthesizes complex or diverse information; Collects and researches data; Uses intuition and experience to complement data; Designs work flows and procedures. Problem Solving - Identifies and resolves problems in a timely manner; Gathers and analyzes information skillfully; Develops alternative solutions; Works well in group problem solving situations; Uses reason even when dealing with emotional topics. Project Management - Develops project plans; Coordinates projects; Communicates changes and progress; Completes projects on time and budget; Manages project team activities. Interpersonal Skills - Focuses on solving conflict; Listens to others without interrupting; Remains open to others' ideas and tries new things. Oral Communication - Speaks clearly and persuasively; Listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. Leadership - Exhibits confidence in self and others; Inspires and motivates others to perform well; Effectively influences actions and opinions of others; Accepts feedback from others; Gives appropriate recognition to others. Quality Management - Looks for ways to improve and promote quality; Demonstrates accuracy and thoroughness. Planning/Organizing - Prioritizes and plans work activities; Uses time efficiently; Plans for additional resources; Sets goals and objectives; Organizes or schedules other people and their tasks; Develops realistic action plans. Quality - Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Quantity - Meets productivity standards; Completes work in timely manner; Strives to increase productivity; Works quickly. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee is frequently required to stand; walk; climb or balance and talk or hear. The employee is occasionally required to sit. While performing the duties of this job, the employee is occasionally exposed to fumes or airborne particles; outside weather conditions; and moving mechanical parts. The noise level in the work environment is usually moderate.

Preferred Qualifications Prior experience working in multiple departments in a distribution center. Previous experience operating material handling equipment. Ability to understand written material. Job Summary Works in multiple departments within a distribution center, including case pick, shipping, receiving, returns, loading, order processing, and replenishment. Operates material handling equipment to move inventory within the facility. Major Tasks, Responsibilities, and Key Accountabilities Uses material handling equipment to locate and deliver products, supplies, and equipment to designated areas. Assists with staging and loading orders into trucks for customer delivery. Verifies quantity and quality of incoming products from vendors and distribution centers. Uses packing list information to collect items for customer orders, including building and wrapping pallets of products. Examines and inspects stock items for wear and defects and notifies management of inventory issues. Returns misplaced products to proper storage areas. Maintains a clean working environment in accordance with company safety policies. Performs inventory control functions as needed. Nature and Scope Refers complex, unusual problems to supervisor. Under general supervision, exercises some judgment in accordance with well-defined policies, procedures, and techniques. Work typically involves regular review of output by a senior coworker or supervisor. Work Environment Typically located in a comfortable environment but with regular exposure to factors that may cause noticeable discomfort or a moderate risk of accident or illness, such as temperature extremes, moving machinery, loud noises, and fumes. Ability to lift and carry up to 50 pounds in a physical environment. Ability to stand for periods of time up to and exceeding 60 minutes. Ability to make repetitive movements, such as using a 10-key or calculator, bending, or squatting. No travel required. Education and Experience HS Diploma or GED strongly preferred. Specialized skills training/certification may be required. Generally 2-5 years of experience in area of responsibility. Our Goals for Diversity, Equity, and Inclusion We are committed to creating a culture that promotes equity, respect, and advocacy for every HD Supply associate. We value the diversity of our people. Equal Employment Opportunity HD Supply is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, pregnancy, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

PURPOSE Responsible for driving delivery vehicles and/or operating truck-trailer combinations to transport and deliver materials to customer sites. Adheres to driver safety/compliance regulations, delivers un-damaged goods on schedule, and provides professional service to customers. Drives vehicle weighing greater than 26,000 pounds and may tow vehicles or trailers greater than 10,000 pounds. ESSENTIAL DUTIES AND RESPONSIBILITIES May load or assist with loading and appropriately securing product, materials, or supplies inside delivery vehicle. Delivers customer orders to specified delivery site. Maneuvers vehicles into loading or unloading positions and ensures that vehicle and loading equipment are properly positioned. Assists customers with unloading materials safely and accurately. Takes all precautions to protect the product and the customer's property. Verifies order details and maintains logs of delivery duties including amounts and/or weights of items, mileage and locations of deliveries. Checks items against invoice to ensure order accuracy. Acts as a customer service liaison between the company and the site customer. Handles customer concerns and helps resolve issues as they arise. Maintains the cleanliness and appearance of delivery vehicles; performs routine safety checks to ensure vehicles comply with company guidelines. Required to use hand held devices, except for while driving, to ensure compliance with DVIR and HOS. Maintain hours of service logs and pre/post trip inspection procedures. May perform credit/product return pick-ups and related paperwork. Operate a Forklift or non-motorized material handling equipment to load and off load materials to designated areas. Understands and observes all safety procedures and practices in order to prevent injury to self or co-workers; attends periodic safety meetings as required; may recommend changes to improve safety procedures. Other duties as assigned. SUPERVISORY RESPONSIBILITIES This job has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. High School Diploma or GED, 21+ years old, valid driver's license and a class A CDL license. A minimum of 1 year of delivery driving experience. 2 years of CDL driving experience are strongly preferred. Valid driver's license Class A CDL license Pass MVR report Obtain a DOT medical card within five (5) days of a request Have less than 5 moving violations in the last 5 years Basic math & measurement skills Ability to read and speak the English language COMPETENCIES Relationship Building: Builds working relationships and seeks to resolve issues constructively. Teamwork: Knows and supports teammates' work and deliverables. Encourages team unity through sharing information or expertise. Customer Focus: Listens to, anticipates and responds to customer needs. Conflict Resolution: Manages difficult situations professionally and partners with others to achieve mutually beneficial results. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed within a production environment, subject to temperature variations, hazardous chemicals, mechanical parts, increased noise levels and dust. Must be able to lift and carry up to 100 pounds frequently and on occasion may be required to lift and carry, with assistance, up to 200 pounds. May be required to perform specific tasks that involve climbing, lifting, pushing or kneeling. Must be able to physically operate delivery vehicles (climb up and down into cab, twist torso for 360 degree visibility, use arms to operate controls, etc.).

PURPOSE Under the general direction of the General Manager, manages multiple operations that control the flow of materials both to and from the location in the most timely, productive and cost effective method possible. Examples of these operations would be manufacturing, distribution, warehouse, etc. ESSENTIAL DUTIES AND RESPONSIBILITIES Responsible for the overall operations and physical conditions of the location's facilities and equipment. Oversees the daily operations of the delivery and warehousing functions. Partners with lead managers of departments and helps to train and develop personnel involved in the operations function in these departments. Budgets & controls operating costs to meet or exceed annual profit targets. Plans operations strategies and goals, establishing each department's priorities and sequences for the smooth flow of products to customers. Reviews team and team member performance on a regular basis by compiling operational reports that measure on-time deliveries, back orders, hours worked, shipments received, etc. to ensure minimum costs, prevent operational delays and to forecast both short and long-term planning needs. Resolves problems relating to processes, costs, orders, maintenance, inventory control, equipment/trucks, services, and systems that affect the division's ability to meet or exceed customer needs. Prepares overall operations schedules and coordinates staffing problems with team leaders in Warehouse, Shipping, Yard, Office and Purchasing to ensure specific operational performance and optimum utilization of all resources. Resolves team member issues affecting overall performance of the division. May resolve employee relations issues, utilizing tact, diplomacy, and judgement. Fosters cross department interaction/communications with Production Manager, Sales Manager, Controller and other key team members on processes that affect these groups such as buying stock for the mill, shipping products the mill produces, providing documents for accounts receivables and payables, special orders for sales, scheduling of millwork, truss and material deliveries, etc. Takes an active role in employee training programs for drivers, yard personnel, and supervisors. This includes motivating employees, maintaining a productive work force and training successors. Analyzes and maintains all vendor evaluations and makes necessary recommendations for revisions. Monitors existing services and initiates new service options to keep Builders FirstSource ahead of the competition. Participates in decisions to accept or reject orders. Directs the implementation of safe operating practices in compliance with Company and regulatory policies (DOT regulations, forklift operations, OSHA compliance, etc.) Plans and implements equipment and facility design upgrades and maintenance. Active in professional trade groups such as Home Builder's Association and participates in LMC meetings and customer appreciation events. SUPERVISORY RESPONSIBILITIES Carries out managerial responsibilities in accordance with the organization's policies and applicable laws. Supervises employees such as Plant Managers or Supervisors. Responsibilities include interviewing, hiring, and developing/training team members; planning, assigning, directing and delegating work; appraising performance; rewarding and disciplining team members; addressing complaints and resolving problems. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Bachelor's degree from 4-year college or university, and 4 years of directly related experience in the lumber or building materials industry with multiple assignments in all phases of the business; or equivalent combination of education and experience. Knowledge/experience in building materials, procurement, inventory management and supervision of people is required. Must also have strong customer service experience, and good organizational skills. COMPETENCIES Language Skills Ability to read, analyze, and interpret common financial reports, trade journals, and legal documents. Ability to respond to common inquiries or complaints from customers, regulatory agencies or member of the business community. Ability to write speeches and articles for publication that conforms to prescribed style and format. Ability to effectively present information to top management, public groups, and/or boards of directors. Must be able to persuade individuals or groups to take actions that would result in obtaining a mutually desired outcome. Influencing others is a major requirement of this position. Must have exceptional leadership and teamwork abilities. Mathematical Skills Ability to apply concepts such as fraction, percentages, ratios and proportions to practical situations. Ability to calculate figures and amounts such as discounts, interest, commissions, proportions percentages, area, circumference and volume. Ability to apply concepts of basic algebra and geometry. Must be able to develop and interpret graphs and charts. Reasoning Ability Ability to define problems, collect data, establish facts and draw valid conclusions. Ability to interpret an extensive variety of technical instructions and deal with several abstract and concrete variables. Solutions require modification of standard approaches to develop alternative course of action. Problems are varied and unrelated and require problem identification and analyses. Develops new ways of doing things that introduce new elements. Computer Skills Must have thorough knowledge of or quick ability to learn order processing/delivery systems. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Occasional travel may be required. Must be knowledgeable about and follow the company's safety policies and procedures. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the manager is regularly required to sit, use hands to finger, handle, or feel; and talk or hear. The manager regularly stands and walks to other departments. Specific vision abilities required by this job include close vision, color vision, peripheral vision, and ability to focus. Some very limited driving is needed. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The noise level in the work environment is usually moderate. Position is located in an open, office area. There is some occasional exposure to outside weather conditions during visits to the yard.

PURPOSE Under direct supervision, the Maintenance Technician I is an entry level position and is responsible for conducting machine setup, troubleshooting, repairs, and preventive maintenance service with basic efficiency. They may also be responsible for resolving warranty and non-warranty repairs to damaged products. Performs duties under the direction of the Maintenance Manager and Leads. ESSENTIAL DUTIES AND RESPONSIBILITIES Ensures operation of machinery and mechanical equipment by completing preventive maintenance requirements on engines, motors, pneumatic tools, conveyor systems, and production machines; following diagrams, sketches, operations manuals, manufacturer's instructions, and engineering specifications; troubleshooting malfunctions. Locates sources of problems by observing mechanical and electrical devices in operation; listening for problems; using precision measuring and testing instruments. Removes defective parts by dismantling devices; using hoists, cranes, and hand and power tools; examining form and texture of parts. Determines changes in dimensional requirements of parts by inspecting used parts; using rules, calipers, micrometers, and other measuring instruments. Adjusts functional parts of devices and control instruments by using hand tools, levels, plumb bobs, and straightedges. Controls downtime by informing production workers of routine preventive maintenance techniques; monitoring compliance. Fabricates repair parts by using machine shop instrumentation and equipment. Maintains equipment, parts, and supplies inventories by checking stock to determine inventory level; anticipating needed equipment, parts, and supplies; placing and expediting orders; verifying receipt. Conserves maintenance resources by using equipment and supplies as needed to accomplish job results. Provides mechanical maintenance information by answering questions and requests. Prepares mechanical maintenance reports by collecting, analyzing, and summarizing information and trends. Maintains technical knowledge by attending educational workshops; reviewing technical publications; establishing personal networks. Maintains continuity among work teams by documenting and communicating actions, irregularities, and continuing needs. Maintains safe and clean working environment by complying with procedures, rules, and regulations. Contributes to team effort by accomplishing related results as needed. Performs building, lighting, and plumping repairs for Facility as needed. Other duties may be assigned Some positions may: Conduct service/repairs, assist with warranty issues, and file warranty reports with vendors. Provide on-site assistance to help troubleshoot and repair product and/or equipment. Plan and coordinate activities concerned with investigating and resolving customer reports of problems. Review performance reports and documentation from customers and sales representatives and inspect malfunctioning or damaged product to determine nature and scope of problem. Analyze review and inspection findings to determine source of problem, and recommend repair, replacement, or other corrective action. Maintain high accuracy in performing service work on product per work order specifications. Provide a communication link between the customer and the Company to help ensure that effective service is provided to the customer. Back up other maintenance technicians as needed. Inform supervisor of any shortages in stock, or of any malfunctions or damage to equipment or vehicles. Help load trucks for delivery and assist in unloading incoming trucks. Restock incoming supplies, keep tools and machinery clean and maintained, and is responsible for all tools assigned to truck. Maintain truck by keeping it clean and organized. Check fluids and tire pressure daily. SUPERVISORY RESPONSIBILITIES This position has no supervisory responsibilities. MINIMUM REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. High school diploma or general education degree (GED); 1 - 2 years of related experience Or equivalent combination of education and experience. Valid driver's license COMPETENCIES Ethical Conduct Problem Solving/Analysis Technical Capacity Attention to detail Knowledge of industry safety practices Knowledgeable in the use of a variety of hand and power tools Language Skills-The ability to read a limited number of two- and three-syllable words and to recognize similarities and differences between words and between series of numbers. The ability to print and speak simple sentences. Reasoning Ability-Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. WORK ENVIRONMENT / PHYSICAL ACTIVITY The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work flexible hours including over time as needed. May be required to drive to other facilities and job sites. Regularly required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms and stoop, kneel, crouch, or crawl. Frequently required to sit. Occasionally required to climb or balance and talk or hear. Must frequently lift and/or move up to 50 pounds and occasionally lift and/or move up to 75pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and depth perception Regularly exposed to moving mechanical parts and outside weather conditions. Frequently exposed to fumes or airborne particles and risk of electrical shock. Occasionally exposed to high, precarious places and vibration. The noise level in the work environment is usually moderate