Field service technician jobs in Baytown, TX - 1,575 jobs

Based in Houston, Taurus Industrial Group (Taurus) is a leading, integrated and industry-diversified technical services company offering end-to-end services across multiple service lines. Leveraging a growing footprint with operations in the U.S., Canada, and Mexico, Taurus's service offerings cover engineering and automation, electrical and instrumentation, power systems testing and commissioning, civil and mechanical crafts, pipe and structural steel fabrication, rotating equipment maintenance and repairs, full-service soft crafts, insulation and scaffold, specialty tooling and machining, technical bolting, heat treating, hot-tapping, line stopping and NDT / inspections. With over 60 years of continuous, safe, and reliable operating experience, Taurus operates across multiple industries and sectors, providing front-end engineering, routine maintenance, capital projects, and turnaround services. We service multiple areas of the energy industry, from our origins in traditional petrochemical and refining industries to the broader power, natural gas, midstream, industrials, and the emerging renewables market. About the Role: Summary The Field Service Technician performs a variety of tasks, including but not limited to, onsite bolting, heat treating and/or field machining. Completes any and all tasks assigned by the Field Supervisor to meet goals of increased efficiency, profitability, and customer satisfaction. Ideal candidates will have experience with construction or mechanical work and/or possess knowledge of plant maintenance and repair work. Qualification Requirements To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Minimum Qualifications Experience in mechanical bolting, heat treating, or field machining preferred. Experience performing maintenance and turnaround services to refining, chemical, midstream, and power. High School Graduate or General Education Degree (GED) preferred. Possess a current TWIC card or have the ability to obtain one. Valid driver license with a clear driving record Demonstrated mechanical ability. Must be able travel a minimum of 75% of the time. Knowledge, Skills and Abilities Ability to pass a non-DOT medical exam, drug and alcohol test, respirator qualification test, and federal class background check. Ability to work at heights or in enclosed spaces. Accuracy - Ability to perform work accurately and thoroughly. Detail Oriented - Ability to pay attention to the details of a project or task. Safety Awareness - Ability to identify and correct conditions that affect employee safety. Working under pressure - ability to complete assigned tasks under stressful situations and adapt to changing assignments on short notice. Accountability - Ability to accept responsibility and account for his/her actions. Essential Functions Perform onsite bolting, heat treating or field machining work at customer locations. Troubleshoot onsite equipment and determine the proper methods fulfill customer's needs and specific applications. Operate a variety of tools for field work. Properly document and/or record work performed utilizing required internal and customer job-related forms/paperwork. Keep a clean and safe working environment and optimize space utilization. Communicate and cooperate with supervisors and coworkers. Meet and communicate with customers in a professional manner. Operate and preventively maintain company tools, equipment, and vehicles. Follow quality service standards and comply with procedures, rules, and regulations. Work in accordance with all safety regulations Other duties as assigned Physical Demands Must be able to stand and walk for much of the day. Ability to lift 5-25 pounds frequently and ability to lift, up to, 50 pounds occasionally. Work Environment Is frequently exposed to variable weather conditions. Other conditions may include proximity to forklifts or other heavy machinery and using various tools and hardware. Worker is subject to frequent heavy lifting. BE SURE TO APPLY ON OUR WEBSITE: ****************

The Level II Technician will be performing calibrations, Nondestructive Tests, and evaluations for acceptance or rejection determinations according to written instructions and record results. Level II Technicians are qualified to set up and calibrate equipment and to interpret and evaluate results with respect to applicable codes, standards, and specifications. Level II Technicians are thoroughly familiar with the scope and limitations of the method of NDT being used and should exercise assigned responsibility for on-the-job training and guidance of Assistants and Level I Technicians. Level II Technicians organize and report results of NDT. Duties Set up and calibrate nondestructive testing equipment. Conduct tests to ensure quality or detect discontinuities (defects) using NDT methods of inspection. Establish techniques for proper examination of objects under inspection, ensuring strict adherence to safety regulations. Apply testing criteria in accordance with applicable specifications or standards and evaluate results. Interpret radiographs, cathode ray tube (CRT) or digital readouts, conductivity meters and visual indicators. Organize and report test results. Perform specialized inspections. May instruct and supervise others. Perform other job-related tasks as assigned by management. Interface daily with the client about work priorities and progress of projects. Actively participate in client programs, planning and strategy sessions. Work closely with clients to identify and remove obstacles. Actively participate in client safety initiatives, incident investigations, etc.

**Responsibilities:** - Travel to project locations throughout the USA and internationally for assignments as directed by the Electrical Systems Manager. - Troubleshoot malfunctions in electrical systems, including switchboards, generators, automation systems, and drive systems. - Conduct preventive maintenance checks and calibrations using manufacturers' manuals and electronic testing equipment. - Collaborate with production engineers to ensure proper instrument data transfer and collection. - Install new systems and controls, including power wiring. Systems include PLCs, switchboards, drive systems, computers, and Ethernet communications. - Train crew members on electrical topics such as safety, maintenance, and operation. - Perform on-call work during off-hours as necessary. - Adhere to safe and compliant working procedures. **Requirements:** - High School Diploma or equivalent; electrical certification and training from a technical school or military certifications preferred. - 5+ years of experience in a similar role, with a strong emphasis on troubleshooting. - Previous long-term employment history. - Experience in the marine industry and dredging projects is highly preferred. - Proficiency in reading blueprints of electronic schematics and process and instrumentation diagrams. - Experience in installing and maintaining electrical systems. - Ability to take initiative, work independently, make decisions, and develop recommendations. - Strong interpersonal skills to build effective working relationships both internally and externally. - Must be willing to travel 100% within the USA and occasionally out of the country.

Join the country's leading Cardiac PET provider! Cardiac Imaging Inc. (CII) is looking for talented and ambitious professionals to join our dynamic team and improve patient outcomes across the nation. Despite heart disease being the leading cause of death in the US, most physicians and patients do not have access to the leading technology in Cardiology. At CII, our mission is to create a more accessible healthcare system by enabling all physicians to treat their patients with the most advanced technology - all from the comfort of their own practice. Our innovative team drives this mission forward each and every day with our Mobile and Fixed Cardiac PET Solutions. As we continue to grow, we currently have a tremendous opportunity for a Senior Field Service Engineer who is up for the challenge. Summary: Responsible for providing installation, technical repair and service work in the field or at the hub for equipment and systems, including ensuring equipment in trailers does not interfere with the safety of operation of the trucks and trailers on roadways. Lead or assist with the installation and servicing of medical imaging equipment and provide assistance to Service Engineers, Technicians as well as Apprentices. Repair, replace or install parts and devices with expertise as required. Essential Functions: The following list of essential functions is not intended to be restrictive or all inclusive. The fact that certain duties may not be listed does not limit the assignment of additional and/or other duties. Independently complete full mobile unit load inspection to ensure secure road safety, including PET-CT and Uninterrupted Power Supply (UPS) secured to specifications, in addition to checking electrical system for fire hazards and safe operation, quarterly or at least bi-annually, or sooner if problems arise. Exercise discretion to identify whether repairs are needed and, if so, what repairs to make. Complete safety checklist of mobile unit inspection to identify any abnormalities, weekly for local units, or at least 5-6 times per year for remote units. Exercise discretion to identify whether repairs are needed and, if so, what repairs to make. Perform trouble shooting and field repairs. Provide phone support for customers and CII clinical staff regarding technical issues in a professional and friendly manner. Prepare/perform equipment Preventive Maintenance according to specification and documentation. Submit and fill out all required paperwork and service reports in a timely manner, no later than 48 hours. Preparing equipment for customer installation, including staging system and testing for functionality including Packing, for PET/CT system, PET system, CT system, elution system, computer, laptop, dose calibrator, blood pressure monitor, ECG system, and systems for image data transfer. Parts testing at hub locations. Leading installation and deinstalls as required. Support team members especially service technicians and service apprentices in their trouble shooting, training and guidance for field repairs or preventive maintenance. Find spare parts if needed or support Inventory specialist in parts acquisition. Conduct training classes for existing or new equipment service. Inspect and report irregularities, cleanliness, defects of CII assets, including mobile and fixed sites. Maintain tools and calibration requirements. Always adhere to safety procedures. Travel up to 80% of the time. Other related duties as assigned. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job Physical activity - talking, hearing, balancing, stooping, kneeling, crouching, reaching, standing, pushing, pulling, lifting, grasping, and fingering. Medium work - exerting up to 50 pounds of force occasionally and/or up to 30 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Visual Acuity - The worker is required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading. The worker is required to have visual acuity to perform an activity such as: operates machines where the seeing job is at or within arm's reach; performs mechanical or skills trades tasks of a non-repetitive nature. The work is required to have the visual acuity to operate motor vehicles and/or heavy equipment. Travel: Extensive nationwide travel is required for this position, on a moment's notice if needed, including overnight stays. Qualifications and Requirements: An Associate's degree in electronics or equivalent work experience Five (5) or more years of Siemens Biograph system staging, installation and troubleshooting Two (2) or more years of experience as a Service Engineer with an established service organization or OEM in the Nuclear Medicine field or completed CII training. Basic computer skills, MS Suite Valid Driver's license and clean driving record Reliable Transportation Ability to travel US wide Ability to read operating manuals and instructions Ability to communicate fluently both verbally and in writing Problem-solving skills and ability to exercise independent judgment and discretion Knowledge of electronic safety and procedures, low to high voltage Electronics/Mechanical background Advanced Knowledge of PET/CT and or PET Self-driven, motivation to succeed Ability to learn company policies and adhere to them in the performance of all assigned duties and communicate any compliance deviations to management in a timely manner

Required Skills & Experience - 2+ years of hands-on experience installing, maintaining, testing & repairing electrical equipment for power distribution system and substations. - Switchgear/substation testing & repair - Medium voltage switchgear/power distribution - 2+ years of working on protective relays - Willing to obtain a NETA II or III level technician certification - Willingness to learn and Positive attitude - Must be comfortable working in a field environment - HS Diploma/GED or comparable experience - Ability to work independently without need for direct supervision - Capable of troubleshooting distribution and transmission controls circuits - Able to pass a pre-employment drug screen, complete a satisfactory criminal background check. - Must have a valid driver's license and currently have and be able to maintain a good driving record. Nice to Have Skills & Experience - NETA II or NETA III certification - Advanced degree - TWIC card - Offshore/International work experience - Ability to use personal vehicle (with vehicle allowance provided for travel) - Low voltage experience Job Description About the Company - Insight Global is seeking a Power Field Services Technician to join our client in the Houston and surrounding area. At this organization, our engineers and technicians specialize in electrical acceptance testing, commissioning, and maintenance testing for a wide range of clients including Utility, Generation, Industrial, and Commercial Facilities. We perform all testing in accordance with NETA/ANSI standards. We are committed to providing a culture of safety and technical expertise in the Power Industry. We are looking to grow our team. Focus on Substations, Power Services, protective relays Responsibilities • Perform installation, commissioning, testing and maintenance on low and medium voltage distribution equipment and substations.- Breakers, Transformers, Cables, Protective Relays, ATS, MCCs, And more…. • Adheres to testing and service protocols as well as customer requirements, ANSI/IEEE/NETA procedures and OEM requirements. • At least 50% of the job will be field service but it also requires in-house engineering and testing support Compensation $25/hr to $55/hr. Exact compensation may vary based on several factors, including skills, experience, and education. Benefit packages for this role will start on the 31st day of employment and include medical, dental, and vision insurance, as well as HSA, FSA, and DCFSA account options, and 401k retirement account access with employer matching. Employees in this role are also entitled to paid sick leave and/or other paid time off as provided by applicable law

First year potential $40k - $60k based on performance Schedule: M - F (occasional afterhours*) // Hours: start to finish job, so depends on last job completed PLEASE NOTE THAT WE DO A 7-YEAR MOTOR VEHICLE REPORT (MVR) REVIEW. Water Softener experience required - at least 1 year minimum. At ABC Home & Commercial Services, we're more than just a company; we're a family committed to excellence. With 75 years of history and a team of over 1,000+ employees serving a growing network of cities in Central and South Texas, we take pride in being a family-owned business dedicated to fulfilling commitments, serving others, and supporting families. Come be a part of something special - apply now! How You'll Make an Impact: As ABC's Water Softener Service Technician (WQ), you will sell, install, repair, and/or maintain water treatment and filtration systems with professionalism and excellent customer service. Requirements What You'll Bring: Water Softener experience required - at least 1 year minimum. Must hold a valid driver's license with an issue date of at least five years prior to the date of this application. Class I, II, or III Water Treatment license, or the ability to obtain one. Excellent communication & customer service skills. High proficiency with emailing, instant messaging and use of various electronic devices and applications for effective communication/information sharing. Ability to prioritize workload, work under pressure and handle irate customers and still maintain good composure. Dependable and self-motivated with desire to work year-round. Ability to work inside and/or outside for long periods of time, sometimes in extreme temperatures. Must hold a valid driver's license with an issue date of at least five years prior to the date of this application. What We Offer: Comprehensive benefits package including health, dental, vision, and life insurance. 401(k) with company matching. Paid vacation, sick leave, and participation in our Profit-Sharing Plan. Additional compensation opportunities through our Lead Now Program. Company clubs, outings, and paid training and development opportunities. Tuition reimbursement and educational scholarships for employees and family members. Volunteer Engagement Program with approved Volunteer Time Off (VTO). Wellness program including a gym membership and a company vehicle with gas card. What You'll Do: Must know and understand all applicable federal, state, and local codes and be able to apply them in a practical manner on each job. Accurately diagnose the cause of water quality issues; recommend options for repair, installation or replacement of systems to customers; and complete all authorized service repairs. Quote each job by using a flat rate price book in accordance with company policy, collect and deliver payment from customer to the office and complete and submit all required paperwork in a timely and accurate manner. Work with inspectors, suppliers and co-workers to ensure correct project work, while abiding by all codes. Carry out general skills such as: soldering; pipe-threading/gluing/using pro-press tools and fittings; diagnosing mechanical issues with water treatment equipment and repairing; water leak detection and repair; performing basic water quality tests; changing out drinking water filters. Communicate effectively with supervisors, dispatchers, CSRs and customers to ensure complete alignment at all times during the service repair or replacement process. Work with and train any helpers which may be assigned to work with you. Maintain necessary licenses or certifications and complete required continuing education. Maintain a professional attitude at all times with customers, fellow employees and supervisors. Schedule: M - F (occasional afterhours*) // Hours: start to finish job, so depends on last job completed Join Our Team Today: At ABC Home & Commercial Services, we're excited to welcome you to our Team and support your growth as we work together to keep our community comfortable and thriving. What are you waiting for - in 2 weeks you could be behind the wheel of our very spiffy white vans - you know the one with the Anteater on it. ABC is an Equal Opportunity Employer. Please note that if an offer is extended that we do conduct the following pre-employment screenings: Drug Screen, Physical & Physical Performance Evaluation (PPE). ABC participates in the E-Verify (I-9) program and conducts comprehensive criminal background checks, along with a 7-year Motor Vehicle Report (MVR) review. Must hold a valid driver's license with an issue date of at least five years prior to the date of this application. *As an equal opportunity employer, we are committed to respecting the religious beliefs and practices of all individuals. We will consider reasonable accommodation requests from applicants and employees who require adjustments to their work schedules or practices due to sincerely held religious beliefs, provided such accommodations do not create an undue hardship on the company's operations.

Hi, Greetings Hope you are doing great! I would like to update you on an urgent open position with our esteemed client. Please go through the Job Description. Send me your updated resume and expected rate for the below position. Role: Technology Lead - Cable MSO Service Duration: Full TIme Location: Houston, TX Basic Qualifications • Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. • At least 4 years of experience with Information Technology. Preferred • At least 5+ years of experience in production support with Cable MSO service offerings • Experience in leading team • Experience in Production Operations Support in Video domain • Strong Knowledge of STB and Video Domain - Docsis knowledge will be a huge advantage • Experience in Cable and telecom domain, understanding of Cable MSO operations • Very strong analytical and reporting skills • Ability to perform complex work requiring broad technical knowledge •Excellent communication skills and client interfacing skills • Experience and desire to work in a Global delivery environment Qualifications Bachelor's degree or foreign equivalent required from an accredited institution. Will also consider three years of progressive experience in the specialty in lieu of every year of education. Additional Information All your information will be kept confidential according to EEO guidelines.

We are seeking a highly skilled and motivated **Technical Lead** to oversee the implementation phase, support activities, and continuous improvement of our **Valve Condition Monitoring (VCM)** data collection models. This strategic global and hands-on role is responsible for supporting global teams, sustaining existing service contracts, and leading the development and deployment of secure data collection solutions. This role is critical to ensuring the successful implementation and long-term reliability of VCM services across diverse industrial environments. **Key Responsibilities:** **1. Technical Support for Global Opportunities** + Serve as the technical authority for VCM technologies to provide expert technical guidance to world area teams pursuing new VCM opportunities. + Assist in solution design, proposal development, and customer presentations to ensure alignment with service capabilities and customer needs. + Act as a technical liaison between regional teams and central engineering, software development, and support resources. + Ensure compliance with industry standards and internal quality protocols during service implementation. **2. Service Sustainment & Troubleshooting** + Act as the primary technical contact for world area VCM teams, providing expert guidance, troubleshooting, and resolution of VCM-related issues. + Diagnose and resolve technical issues affecting existing VCM contracts to maintain service continuity and performance. + Lead root cause analysis and corrective actions for system failures, data collection anomalies, or connectivity issues. + Collaborate with field service and support teams across various Emerson groups to ensure timely resolution and customer satisfaction. + Conduct training sessions and workshops for world area VCM teams on systems configurations and maintenance best practices. + Translate complex technical findings into actionable insights for world area VCM teams, enhancing operational excellence. + Develop and maintain documentation, including service manuals, troubleshooting guides, Functional Design Specifications, and FAQs. + Identify recurring issues and lead root cause analysis efforts to implement long-term solutions. **3. Development & Deployment of Online Data Collection Solutions** + Lead the review, design, and implementation of secure online data collection models using Purdue Enterprise Reference Architecture (PERA) and Data Diode solutions for Industrial Control Systems. + Work closely with cybersecurity, IT, and engineering teams to ensure compliance with data protection standards and operational integrity. + Drive innovation in remote monitoring capabilities to enhance service scalability and responsiveness. **4. Ownership of VCM Implementation Process** + Define, document, and continuously improve the end-to-end VCM implementation process. + Ensure consistent execution across projects, including planning, installation, commissioning, and validation. + Develop and/or recommend tools, training materials, process guides, and best practices to support global deployment teams. **Qualifications, Experience & Skills:** **Required Qualifications** + **Education:** Bachelor's degree in Electrical, Mechanical, Controls/Instrumentation, Computer/Electrical Engineering, or related field; or equivalent practical experience. + **5 Yr experience in IT/OT systems** for industrial and enterprise environments, including networking, credential management, domain services, and application integration. + **OT Networking & ICS Security:** Experience with secure data architectures, including Purdue Model zones/levels, firewalls/jump servers, secure remote access, data diodes/unidirectional gateways, and segmented architectures in plant environments. + Familiarity with industrial plants architectures, control systems, asset management platforms, and IIoT technologies. + **Troubleshooting & Sustainment:** Proven experience in customer-facing technical role, root cause analysis ( **RCA)** process, diagnosing **anomalies** , **connectivity issues** , and **system failures** across field devices and control network. + **Cross‑functional leadership:** Experience acting as a **technical authority/liaison** across regional teams, central engineering, and customer stakeholders; able to run workshops and **deliver training** . + Strong communication, presentation, and interpersonal skills, with ability to lead colleagues by influence (often virtually), and comfortably engage with customers at decision-making levels. + Analytical thinker with excellent project management and prioritization skills; well-organized and detail oriented. + **Documentation & Process:** Able to **define, document, and continuously improve** implementation processes, create **service manuals & troubleshooting guides** , and maintain high-quality knowledge base content. + Excels at self-managing workload and executing multiple concurrent projects to meet deadlines. + Ability to effectively interact with all levels of the organization to meet milestones. **Preferred Qualifications** + **Experience in** **industrial automation** or **asset management/condition monitoring** , including commissioning, support, and troubleshooting of instrumentation or control systems in process industries. + **Instrumentation:** Hands-on with control valves, positioners/digital valve controllers, instrumentation protocols (HART/FOUNDATION Fieldbus/Modbus). + Good understanding of **predictive maintenance** and valve diagnostics technologies. + **Instrumentation:** Experience with Emerson DVCs, ValveLink software, Asset Management Systems, smart instrumentation; calibration and loop checks. + **Cybersecurity:** Familiarity with **IEC/ISA 62443** standard and **NIST SP 800‑82** guide. + **End-to-end solution implementations:** Designed and deployed secure architectures from field device/positioner → control network → historian/cloud → analytics. + **Cyber-OT collaboration:** Worked with **cybersecurity/IT/engineering** to meet **policy/standard requirements** , including segmentation, hardening, logging, and remote access governance; successfully integrated **data diodes** without impacting operations. **Our Culture & Commitment to You:** + At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing an inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams, working together are key to driving growth and delivering business results. + We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet you and your family's physical, mental, financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave. \#LI-AN1 **WHY EMERSON** **Our Commitment to Our People** At Emerson, we are motivated by a spirit of collaboration that helps our diverse, multicultural teams across the world drive innovation that makes the world healthier, safer, smarter, and more sustainable. And we want you to join us in our bold aspiration. We have built an engaged community of inquisitive, dedicated people who thrive knowing they are welcomed, trusted, celebrated, and empowered to solve the world's most complex problems - for our customers, our communities, and the planet. You'll contribute to this vital work while further developing your skills through our award-winning employee development programs. We are a proud corporate citizen in every city where we operate and are committed to our people, our communities, and the world at large. We take this responsibility seriously and strive to make a positive impact through every endeavor. At Emerson, you'll see firsthand that our people are at the center of everything we do. So, let's go. Let's think differently. Learn, collaborate, and grow. Seek opportunity. Push boundaries. Be empowered to make things better. Speed up to break through. Let's go, together. **Work Authorization** Emerson will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1(including those with OPT or CPT) , H-1, H-2, L-1, B, J or TN, or who need sponsorship for work authorization now or in the future, are not eligible for hire. **Equal Opportunity Employer** Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment. **Accessibility Assistance or Accommodation** If you have a disability and are having difficulty accessing or using this website to apply for a position, please contact: idisability.administrator@emerson.com . **ABOUT EMERSON** Emerson is a global leader in automation technology and software. Through our deep domain expertise and legacy of flawless execution, Emerson helps customers in critical industries like life sciences, energy, power and renewables, chemical and advanced factory automation operate more sustainably while improving productivity, energy security and reliability. With global operations and a comprehensive portfolio of software and technology, we are helping companies implement digital transformation to measurably improve their operations, conserve valuable resources and enhance their safety. We offer equitable opportunities, celebrate diversity, and embrace challenges with confidence that, together, we can make an impact across a broad spectrum of countries and industries. Whether you're an established professional looking for a career change, an undergraduate student exploring possibilities, or a recent graduate with an advanced degree, you'll find your chance to make a difference with Emerson. Join our team - let's go! **No calls or agencies please.** **Requisition ID** : 25030295 Emerson is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, age, marital status, political affiliation, sexual orientation, gender identity, genetic information, disability or protected veteran status. We are committed to providing a workplace free of any discrimination or harassment.

Why Join our Team? At Vallen, we embrace what makes us unique. We thrive on the diversity of our associates and the different ways each of us contributes to Vallen's success. We pride ourselves on being an inclusive company that values the growth of our associates. When you join Vallen, you become part of our winning team. Our vast network of connections is here to help you transform your job into a career. Vallen is an industry leader in delivering flexible supply chain solutions while creating value for our customers, our supply partners, and our associates. Your Benefits at Vallen: * Medical, Dental, Vision * Paid time off (vacation, holidays, sick days) * 401K with discretionary company match - (US positions only) * Employer-paid Basic Life for Employee, Spouse, and Dependents * Employer-paid Short-Term and Long-Term Disability * Health Care and Dependent Care Flexible Spending Accounts * Vitality Wellness Program * Employee Assistance Program * Employee Resource Groups for networking and team building * Tuition Reimbursement Program * Employee Referral Program * Safety Shoe and Safety Glasses reimbursement * Employee Discounts through BenefitHub * Advancement Opportunity. Position Summary: Put your maintenance and repair skills to good use at Vallen as a Lead Onsite Technician in the Vallen Safety Services group. In this position, you will lead technicians in the installation and/or inspection, testing, and maintenance of life safety systems and equipment for established customers on a scheduled basis. Essential Job Duties and Responsibilities: * Responsible for the quality of service provided to our customers, ensure that Vallen personnel are following Vallen standard operating procedures, and that assigned HTS technicians are being properly trained and utilized. * May also have scheduling responsibilities. * Leads small groups or on-site service centers within area of expertise. * May be responsible for interacting with the customers to coordinate job activities. * Responsible for ensuring all documentation associated with assigned tasks is filled out accurately, completely & turned in for proper invoicing. * Ensures all required copies provided to the customer upon servicing equipment. * In depth knowledgeable of all applicable regulatory standards pertaining to assigned duties, i.e., State, OSHA, and NFPA regulations, etc. * Responsible for Parts & Equipment requests. * Maintaining accurate inventories related to job and maintenance orders. * Assist shipping and receiving, unloading trucks, checking in merchandise, matching purchase orders to sales orders & distributing to sales associates for processing. * May include the use of company provided assets such as but not limited to: Company Vehicle, Inventory, Safety Equipment, Laptop, LSI Scanner, Test Equipment, Tools, Radio, Cell Phone, Fuel Card and/or Credit Card. * Associates are required to maintain proper care of all assets as defined by policies. Job Qualifications: * High School or GED * Minimum 4 Certifications (manufacturing/state) in a fire protection related field * NICET II or greater * Fire Alarm & Ext A and 5+ years' experience or * WBS Construction and 5+ years' experience * RME-I (if applicable) * Mechanically inclined * Advance communication, initiative, and problem-solving skills * Specific -- RELEVENT experience * Experience in the installation and/or maintenance, repair and service of life safety systems and equipment. * Advance industry segment knowledge. * Maintain minimum productivity of 90% within 60 days. * Demonstrated ability to successfully manage a Customer Acct or Project. * Ability to repair and service equipment sold by Vallen. * Current Motor Vehicle License with good driving record. * Commercial Driver's License required if carrying loads of hazardous materials. * Proficient with hand tools. * Able to complete repairs and maintenance of equipment in a timely and accurate manner. * Able to provide assistance, advice and training to Vallen associates and plant personnel. * Assist warehouse personnel with order fulfillment if needed. * Keep all certifications and licenses current and renewed by completing continuing education as required. * Ability to read, write and comprehend English (operational, process and quality instructions). Work Environment & Physical Demands: Reasonable accommodations will be evaluated and may be implemented to enable individuals with disabilities to perform essential functions of this position. * Working conditions will vary with service work being performed indoors and out in the field. * Possibility of working in hazardous environments when working within a plant which would require safety precautions and appropriate equipment. * Ability to work in climatic weather (cold/heat) during day or night operations. * While performing the duties of this job, the employee is regularly required to talk and hear. * Occasional lifting of items weighting a maximum of 55 lbs. * Ability to climb stairwells up to 15 levels high. * Ability to ascend and descend ladders (step, extension, cage) up to 24' high. * Able to walk at a normal pace for up to 15 continuous minutes. * Able to work from a standing position for 8-10 hours. * Bending, climbing, and stooping as needed for access of equipment to repair and service. * Pass all test requirements to be approved to work offshore. (If Applicable) Stay up to date with Vallen, and follow us on LinkedIn, Facebook and Twitter. Equal Opportunity Employer - Ethnically and Culturally Diverse/Females/Veterans/Disabled/Sexual Orientation/Gender Identity

Job Description Training/Base pay rate of $19.00 per hour. The Base rate increases by .50 upon completion of training. We have a Guaranteed Hourly Rate of $23.00 per hour upon completion of training through your first 9 months. This allows time to build your bonus and commission skills. If your post-training base rate, plus bonuses and commission don't bring you to the Guaranteed Hourly Rate, we will increase your pay. However, the earning potential is much higher! Schedule: 2 days off during the week; during slower season enjoy a four-on, three-off schedule. Bonus Opportunity: Earn a Trained and Active Bonus of $1500.00, paid in two installments: $750.00 at 60 days of employment and $750.00 at 6 months. About Us: At Southern Star, we are the driving fulfillment force behind award-winning DISH TV, cutting edge Starlink Satellite Internet and innovative home entertainment and security products. As a Southern Star technician, you will be more than a service provider; you will be a technology ambassador, enhancing the way customers interact with technology. Compensation: Base Pay and Commissions: Start with a competitive hourly rate and earn commissions. Performance Incentives: Boost your earnings with performance bonuses. First-Year Potential: Earn between $50,000 - $60,000 or more in your first year. Experienced Technicians: Earn between $60,000 - $85,000+ annually. Training and Growth: Paid Training: Comprehensive training to ensure your success. Support: Continuous support to help you achieve your career goals. Benefits: Insurance: Comprehensive insurance benefits. Retirement: 401K plans. Paid Time Off: Generous paid time off. Life Insurance: Company paid $25,000 life insurance policy. Company Vehicle: Provided upon completion of training. Device Plan: Monthly stipend for using your own smartphone. Employee Discounts: Exclusive discounts through LifeMart, including home mortgage lender savings. Role Requirements: Technical Skills: Strong technical knowledge and the ability to scale ladders up to 38 ft and navigate crawl spaces. Travel: Willingness to travel up to 20% of the time (lodging and per diem covered by SSI). Communication: Excellent communication and customer service skills. Sales: Successfully upsell products and services to customers while installing DISH systems. Time Management: Effective time management skills. Must have a clear Background, Drug Screen and Motor Vehicle Record Join Us: Become a part of Southern Star and transform the way customers experience home entertainment. Apply today and unlock your potential!

Benefits: 401(k) Competitive salary Free uniforms Opportunity for advancement Role: Lead Home Service Technician in The Woodlands, TX TruBlue Home Service Ally is a national franchise with over 120 locations that provides trusted handyman repairs, home safety upgrades, and maintenance services to help seniors age in place and support busy families. With locations across the U.S., TruBlue is a leader in dependable, relationship-based home maintenance. This is a role for a skilled professional who leads by example, brings out the best in others, and takes pride in work that makes a real difference. What You'll Do Perform high-quality home maintenance and repair projects Lead, coach, and support a team of Tru-Pro technicians Uphold TruBlue's high standard of professionalism, reliability, and customer care Communicate clearly with customers and help manage expectations on-site Ensure safety, accuracy, and consistency across every project Common projects include: Bathroom and kitchen upgrades Drywall repair and patching Flooring installation and repair General carpentry Interior and exterior painting Basic plumbing and electrical (within scope) Who You Are 10+ years of hands-on home repair or construction experience Experience managing or mentoring other technicians is preferred Strong communication and problem-solving skills Committed to doing the job right and doing right by your team and clients Valid driver's license, reliable transportation, and full toolset Fluent in English and legally authorized to work in the U.S. What You'll Get Year-round, consistent work Reliable hours and flexible scheduling Company vehicle and TruBlue gear (varies by location) Strong office and leadership support A team culture built on compassion, trust, and professionalism A leadership role with room to grow Why TruBlue We're a company with a purpose: to make homes safer and lives easier. You'll be joining a team that supports you, respects your expertise, and values the role you play in helping customers live better at home. TruBlue Home Service Ally ️ provides a unique and affordable approach to helping busy adults and seniors live a worry-free life by offering trustworthy handyman, home maintenance and senior modification services. Helping you maintain your home both inside and out, TruBlue's services include: handyman projects and to-do list chores, preventative home maintenance programs, seasonal work, and senior modification services, all handled by a professional and insured Tru-Pro ️ Technician. Thank you for considering a position with TruBlue. All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office.

Benefits: 401(k) Competitive salary Free uniforms Opportunity for advancement Role: Lead Home Service Technician in The Woodlands, TX TruBlue Home Service Ally is a national franchise with over 120 locations that provides trusted handyman repairs, home safety upgrades, and maintenance services to help seniors age in place and support busy families. With locations across the U.S., TruBlue is a leader in dependable, relationship-based home maintenance. This is a role for a skilled professional who leads by example, brings out the best in others, and takes pride in work that makes a real difference. What You'll Do Perform high-quality home maintenance and repair projects Lead, coach, and support a team of Tru-Pro technicians Uphold TruBlue's high standard of professionalism, reliability, and customer care Communicate clearly with customers and help manage expectations on-site Ensure safety, accuracy, and consistency across every project Common projects include: Bathroom and kitchen upgrades Drywall repair and patching Flooring installation and repair General carpentry Interior and exterior painting Basic plumbing and electrical (within scope) Who You Are 10+ years of hands-on home repair or construction experience Experience managing or mentoring other technicians is preferred Strong communication and problem-solving skills Committed to doing the job right and doing right by your team and clients Valid driver's license, reliable transportation, and full toolset Fluent in English and legally authorized to work in the U.S. What You'll Get Year-round, consistent work Reliable hours and flexible scheduling Company vehicle and TruBlue gear (varies by location) Strong office and leadership support A team culture built on compassion, trust, and professionalism A leadership role with room to grow Why TruBlue We're a company with a purpose: to make homes safer and lives easier. You'll be joining a team that supports you, respects your expertise, and values the role you play in helping customers live better at home. All locations are independently owned and operated. Service offerings, certifications, and licenses vary by location. T.B. Franchising Systems, Inc. is not affiliated, connected or associated with TruPros International, Inc. or any of its services. All inquiries specific to employment at this location should be made directly to the franchise location, and not to TruBlue Home Service Ally Corporate office."

Job DescriptionBenefits: 401(k) Competitive salary Free uniforms Opportunity for advancement Role: Lead Home Service Technician in The Woodlands, TX TruBlue Home Service Ally is a national franchise with over 120 locations that provides trusted handyman repairs, home safety upgrades, and maintenance services to help seniors age in place and support busy families. With locations across the U.S., TruBlue is a leader in dependable, relationship-based home maintenance. This is a role for a skilled professional who leads by example, brings out the best in others, and takes pride in work that makes a real difference. What Youll Do Perform high-quality home maintenance and repair projects Lead, coach, and support a team of Tru-Pro technicians Uphold TruBlues high standard of professionalism, reliability, and customer care Communicate clearly with customers and help manage expectations on-site Ensure safety, accuracy, and consistency across every project Common projects include: Bathroom and kitchen upgrades Drywall repair and patching Flooring installation and repair General carpentry Interior and exterior painting Basic plumbing and electrical (within scope) Who You Are 10+ years of hands-on home repair or construction experience Experience managing or mentoring other technicians is preferred Strong communication and problem-solving skills Committed to doing the job right and doing right by your team and clients Valid drivers license, reliable transportation, and full toolset Fluent in English and legally authorized to work in the U.S. What Youll Get Year-round, consistent work Reliable hours and flexible scheduling Company vehicle and TruBlue gear (varies by location) Strong office and leadership support A team culture built on compassion, trust, and professionalism A leadership role with room to grow Why TruBlue Were a company with a purpose: to make homes safer and lives easier. Youll be joining a team that supports you, respects your expertise, and values the role you play in helping customers live better at home.

Probo Medical is a diagnostic imaging sales and service provider that delivers high-quality, affordable healthcare products and services to medical practices around the world. With locations that span across the US, Canada, the UK, and parts of Europe, we've made it our mission to increase access to healthcare services for patients worldwide. We believe that it starts with reducing healthcare costs and empowering medical professionals to make smarter decisions for their healthcare business. As employees of Probo Medical, we focus on building quality relationships with customers, by empowering our teams to solve problems together and creating long-lasting relationships with our customers. If you have a passion for healthcare and share our common goal to help increase patient access to affordable, high-quality products and services, we encourage you to apply! POSITION SUMMARY Reporting to the Area Service Manager, the Field Technical Engineer is responsible for performing OEM service and installations of medical devices. Performs skilled technical work in the repair, preventative maintenance and upgrades of OEM medical devices or systems. Documents and maintains accurate records of inspections, repairs, calibrations and work performed on all equipment. Must be proficient on either Bone Mineral Densitometry (BMD) or Ultrasound (UL) equipment. ESSENTIAL DUTIES AND RESPONSIBILITIES Responsible for the installation and service of OEM medical devices which will include electrical, mechanical and software components. Complete scheduled preventive maintenance, unplanned maintenance and perform any required equipment upgrades. Establish and maintain a high level of customer satisfaction through service excellence. Ensure accurate and timely completion of records of all installations and deinstallations, repairs and maintenance and of all regulatory compliance paperwork. Train customers on basic operation and use of medical devices. Manage inventory, keep accurate records, and return unused and failed parts promptly. Perform PM's on time, provide expeditious on-site response and minimize equipment downtime. Respond to customer inquiries in written form (with managerial approval), in person, or via telephone as needed. Escalate customer issues and unresolved product problems to service management in a comprehensive and timely manner. Promote service contract offerings and assist Sales in selling service agreements to customers within your assigned territory Provide on-call service coverage on a rotating basis, as needed. The above list reflects the general details necessary to describe the principle and essential functions of the position and shall not be construed as the only duties that may be assigned for the position. Requirements REQUIRED EDUCATION AND EXPERIENCE (one or more of the following): Degree in electronics, biomedical engineering, biomedical technology, electrical engineering or equivalent. Military equivalency is also acceptable. One to three years of experience servicing BMD or Ultrasound equipment. Previous mechanical, electronics or fluidics work experience, either in a field service or hospital- based setting, is required. Solid computer skills, including working knowledge of Microsoft Office, software operating systems., and network technology. Previous experience interfacing with both internal team members and external customers as a part of a solution-based service process. Familiarity with the use of common electronic test equipment including Digital Multi-Meters and safety analyzers. Previous experience with or ability to interpret schematics, wiring diagrams, illustrated parts diagrams and technical manuals of biomedical and imaging instrumentation. Valid driver's license, good driving record and must be able to pass a motor vehicle record check. PREFERRED EDUCATION AND EXPERIENCE A Bachelor's Degree in Electrical Engineering or Biomedical Engineering, or Military equivalency with one to three years' experience servicing BMD or Ultrasound equipment is preferred. REQUIRED KNOWLEDGE, SKILLS AND COMPETENCIES Ability to resolve problems, think analytically, work independently and communicate professionally. Willingness to work flexible hours and overtime, often on short notices, and work a rotating on-call service schedule, including weekends, for critical issues and coverage. High degree of mechanical aptitude. Excellent interpersonal and communication skills Resourceful, with the ability to work independently. Strong time management skills. Ability to adapt to changing circumstances. Decision-making, problem resolution and creative thinking skills Attention to detail. Ability to multi-task activities with shifting priorities. Able to work productively in a pressurized environment. Will be required to adhere to certification/credentialing required by the Customer in connection with admission into its facilities to perform job duties. Customer requirements to allow admission into its facilities to perform job duties will include but are not limited to drug testing and immunizations as dictated by the customer or facility policy. SUPERVISORY RESPONSIBILITY This position has no direct supervisory experience. WORK ENVIRONMENT The work environment characteristics described here are representative of those an individual encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. PHYSICAL AND MENTAL DEMANDS Ability to lift, carry and move various items of a minimum of 50 lbs. while utilizing proper technique. While performing the essential functions of this job, the employee is frequently required to stand, walk, sit and drive long periods of time. The employee must have use of hands and fingers and be able to reach with hands and arms, speak and hear. Ability to operate an automobile. Valid state driver's license and good driving record. While performing the duties of this position, the employee is regularly required to sit; use hands and fingers to key, handle or feel; talk or speak; hear, and stand. The employee is occasionally required to stoop, kneel or crouch; bend; reach with hands and arms; and walk. Vision abilities required to perform this job include close vision. The physical and mental requirements described here are representative of those that must be met by an individual to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of the job. TRAVEL REQUIREMENTS The position will require the ability to travel, up to 80% of the time. PAY RAMGE: $32.00 - $35.00/hour Your actual level and base salary will be determined on a case-by-case basis and may vary based on the following considerations: job-related knowledge and skills, education, and experience.

Come join our team! We are a competitive employer offering medical, dental, vision and 401K match! This role will have the ability to assemble, trouble shoot, install, test and maintain electrical or electronic wiring, equipment, appliances, apparatus and fixtures Maintain electrical equipment to meet regulatory codes at the country, state and federal levels Perform safety-related functions and other miscellaneous electrical functions Competent with configuration of VFD's Must possess demonstrated ability to safely utilize a forklift and high lift Knowledge and ability to troubleshoot PLC's Must be physically capable of performing work from ladders, scaffolds, and roofs to install, maintain or repair electrical wiring, equipment and fixtures Proficient in testing and troubleshooting electrical systems and continuity of circuits in electrical wiring, equipment, and fixtures, using testing devices such as ohmmeters, voltmeters, and megaohmeters, to ensure compatibility and safety of system Utilizing systematic approach to trouble shooting and problem solving and avoid replacing parts. Technical Skills Basic Electricity & Electronics DC Equipment & Controls Batteries & DC Circuits· Single-Phase Motors Transformers & AC Circuits Three-Phase Systems Electrical Measuring Instruments Electrical Safety & Protection Electrical Troubleshooting Power Supplies Digital Logic Systems Input/Output Devices Ability to read Electrical Schematics and mechanical blueprints Ladder logic knowledge Variable Frequency Drives Programmable Logic Controllers Knowledge and prior experience with Hydraulics Qualifications High School diploma or equivalent Preferred Electrician License or two year electrical program Candidates will be required to pass a pre-employment background, drug and work screen Must be available to work 12 hour day and night shifts, weekends, call-outs and overtime

Job Purpose Responsible for planning, coordinating, and organizing work activities and resources necessary for manufacturing of products in accordance with cost, quality, and quantity specifications in manufacturing facility. Ensure that all customer orders meet requirements, delivery dates as well as quality and cost specifications. Enforce procedures and requirements in accordance with Weatherford policies while ensuring the safety and performance of all employees. Roles & Responsibilities * Under direct supervision, perform mechanical assembly of low complexity in accordance with established procedures. Know and understand Weatherford's Enterprise Excellence Process and the Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions. * Assemble equipment per engineered drawings or as instructed by others. * Inspect completed components for accuracy and functionality. * Maintain an orderly work area. * Properly maintain company supplied tooling. * Aid in developing of new procedures and improving existing procedures. * Must understand and comply with all safety rules and company policies of Weatherford. * Work assignments carried out to the highest quality level. * Performs any assembly type functions, using hand or power tools. * May operate both stationary and moving overhead cranes. * Operates any equipment needed to perform job. Experience & Education REQUIRED * 1-2 years prior assembly or manufacturing experience * Mechanical aptitude. * Ability to read blueprints and wiring diagrams PREFERRED * Soldering Certification - IPC J-STD-001 Knowledge, Skills & Abilities REQUIRED * Good verbal communication skills. * Basic computer skills * Ability to read and comprehend simple instructions, short correspondence, and memos in English. #LI-KP1

At ABB, we help industries outrun - leaner and cleaner. Here, progress is an expectation - for you, your team, and the world. As a global market leader, we'll give you what you need to make it happen. It won't always be easy, growing takes grit. But at ABB, you'll never run alone. Run what runs the world. This Position reports to: Regional Service Manager - South In this role, you will ensure the efficient planning and fulfillment of products required by customers, focusing on performance improvements such as on-time delivery, lead time reduction, inventory management, and supply plan optimization. You will support production scheduling, material planning, and inventory optimization while driving improvement initiatives and ensuring high customer service levels. The work model for the role is: Remote; Houston, TX or Baton Rouge, LA area. This role is contributing to the Process Automation Energy Industries Division. Your role and responsibilities: Provide site service to ensure safe and efficient plant operation utilizing the ABB Symphony+ or 800xA Distributed Control System. All periodic, routine, preventive maintenance and shutdown support will be handled by you as part of your role (ABB Technical and Advanced Services will provide additional support where applicable at your direction). Troubleshoot low complexity tasks associated with the distributed control system hardware, software issues, and manage technical support requests on the customers behalf to optimize system performance. Maintain customer database by logging each call and the support provided. Suggest ABB solutions to enhance system performance and expand scope of value-add service to the existing contract. Effectively communicate with all site stakeholders to ensure all contracted services meet or exceed expectations. Respond to customer questions, issues, and inquiries with accuracy and timeliness. Maintain a "follow-up" system with customers to ensure the technical advice provided was effective. Support projects for hardware and software upgrades, system modifications and additions, both on-line and off-line. Our Team Dynamics Our teams support each other, collaborate, and never stop learning. Everyone brings something unique, and together we push ideas forward to solve real problems. Being part of our team means your work matters - because the progress we make here creates real impact out there. Qualifications for the role High-school diploma and comparable military technical training. Minimum 1 years of relevant experience or a special combination of education and experience and/or demonstrated accomplishments will be considered. Must be willing to maintain overnight travel of 80%. You will develop and be mentored to provide outstanding field service support of ABB Symphony+ or 800xA Distributed Control System. A demonstrated commitment to excellence, effective communication, problem solving, teamwork, customer focus, and a professional attitude. Applicants must speak fluent English and have a legal driver's license. Candidates must already have a work authorization that would permit them to work for ABB in the US. What's in it for you? We empower you to take initiative, challenge ideas, and lead with confidence. You'll grow through meaningful work, continuous learning, and support that's tailored to your goals. Every idea you share and every action you take contributes to something bigger. ABB is an Equal Employment Opportunity and Affirmative Action employer for protected Veterans and Individuals with Disabilities at ABB. All qualified applicants will receive consideration for employment without regard to their- sex (gender identity, gender expression, sexual orientation), marital status, citizenship, age, race and ethnicity, inclusive of traits historically associated with race or ethnicity, including but not limited to hair texture and protective hairstyles, color, religious creed, national origin, pregnancy, physical or mental disability, genetic information, protected Veteran status, or any other characteristic protected by federal and state law. For more information regarding your (EEO) rights as an applicant, please visit the following websites: ******************************************************************************************** As an Equal Employment Opportunity and Affirmative Action Employer for Protected Veterans and Individuals with Disabilities, applicants may request to review the plan of a particular ABB facility between the hours of 9:00 A.M. - 5:00 P.M. EST Monday through Friday by contacting an ABB HR Representative at **************. Protected Veterans and Individuals with Disabilities may request a reasonable accommodation if you are unable or limited in your ability to use or access ABB's career site as a result of your disability. You may request reasonable accommodations by calling an ABB HR Representative at ************** or by sending an email to ****************. Resumes and applications will not be accepted in this manner. ABB Benefit Summary for eligible US employees Go to my BenefitsABB.com and click on "Candidate/Guest" to learn more Health, Life & Disability Choice between two medical plan options: A PPO plan called the Copay Plan OR a High Deductible Health Plan (with a Health Savings Account) called the High Deductible Plan. Choice between two dental plan options: Core and Core Plus Vision benefit Company paid life insurance (2X base pay) Company paid AD&D (1X base pay) Voluntary life and AD&D - 100% employee paid up to maximums Short Term Disability - up to 26 weeks - Company paid Long Term Disability - 60% of pay - Company paid. Ability to "buy-up" to 66 2/3% of pay. Supplemental benefits - 100% employee paid (Accident insurance, hospital indemnity, critical illness, pet insurance Parental Leave - up to 6 weeks Employee Assistance Program Health Advocate support resources for mental/behavioral health, general health navigation and virtual health, and infertility/adoption Employee discount program Retirement 401k Savings Plan with Company Contributions Employee Stock Acquisition Plan (ESAP) Time off ABB provides 11 paid holidays. Vacation is provided based on years of service for hourly and non-exempt positions. More about us: The Energy Industries Division serves a wide range of industrial sectors, including hydrocarbons, chemicals, pharmaceuticals, power generation and water. With its integrated solutions that automate, digitalize and electrify operations, the Division is committed to supporting traditional industries in their efforts to decarbonize. The Division also supports the development, integration and scaling up of new and renewable energy models. The Division's goal is to help customers adapt and succeed in the rapidly changing global energy transition. Harnessing data, machine learning and artificial intelligence (AI), the Division brings over 50 years of domain expertise delivering solutions designed to improve energy, process and production efficiency, as well as reduce risk, operational cost and capital cost, while minimizing waste for customers, from project start-up and throughout the entire plant lifecycle. We value people from different backgrounds. Could this be your story? Apply today or visit *********** to read more about us and learn about the impact of our solutions across the globe.PandoLogic. Category:Installation & Maintenance, Keywords:Field Service Representative, Location:Houston, TX-77007

Taurus Industrial Group's Specialty Services division is seeking skilled and motivated Field Services Technicians to join our growing team. We provide advanced industrial solutions across power generation, petrochemical, refining, and manufacturing sectors. Our technicians are trusted partners to our clients, delivering precision work in bolting, torquing, machining, induction heating, line-stop, and related specialty field services. If you are a hands-on professional with technical acumen, a safety-first mindset, and the ability to thrive in challenging field environments, we want to hear from you. Key Responsibilities Perform on-site bolting, torquing, tensioning, and induction heating services on critical equipment. Support field machining, hot tapping, and line-stop operations as needed. Install, operate, troubleshoot, and maintain specialized tools and OEM induction equipment. Ensure all work adheres to safety, quality, and compliance standards. Interpret technical drawings, job packages, and client specifications. Collaborate with project managers, supervisors, and customer representatives to ensure timely, accurate, and efficient service delivery. Maintain, calibrate, and prepare rental and company-owned specialty equipment. Travel extensively to client facilities across regional and national assignments. Recommended Qualifications & Requirements Experience: Minimum 3-5 years in industrial services, mechanical maintenance, or specialty field service roles (power plants, refineries, petrochemical, or heavy industry preferred). Certifications/Training: NCCER, OSHA, or equivalent field qualifications (preferred). OEM training on induction heating or bolting/tensioning equipment (a plus). Technical Skills: Proficient in hydraulic, pneumatic, and electronic tool operation. Familiarity with torque/tension charts, machining tolerances, and mechanical fit-up. Physical Requirements: Ability to lift to 50 lbs, work at heights, and endure confined space conditions. Willingness to work extended shifts, nights, weekends, and travel on short notice. Soft Skills: Strong commitment to safety and quality. Clear communication and problem-solving skills. Team-oriented with the ability to adapt to dynamic field environments. Why Join Taurus Industrial Group? Competitive pay with overtime opportunities. Comprehensive benefits: health, dental, vision, 401(k), PTO. Professional training and advancement opportunities. Exposure to cutting-edge specialty service technologies and OEM equipment. Be part of a growing, innovative company that values technical excellence and field expertise. 📍 Locations: Nationwide travel, with primary needs in Texas, Gulf Coast, Northeast, Midwest, and Western U.S. BE SURE TO APPLY ON OUR WEBSITE: ****************

Why Join our Team? At Vallen, we embrace what makes us unique. We thrive on the diversity of our associates and the different ways each of us contributes to Vallen's success. We pride ourselves on being an inclusive company that values the growth of our associates. When you join Vallen, you become part of our winning team. Our vast network of connections is here to help you transform your job into a career. Vallen is an industry leader in delivering flexible supply chain solutions while creating value for our customers, our supply partners, and our associates. Your Benefits at Vallen: * Medical, Dental, Vision * Paid time off (vacation, holidays, sick days) * 401K with discretionary company match - (US positions only) * Employer-paid Basic Life for Employee, Spouse, and Dependents * Employer-paid Short-Term and Long-Term Disability * Health Care and Dependent Care Flexible Spending Accounts * Vitality Wellness Program * Employee Assistance Program * Employee Resource Groups for networking and team building * Tuition Reimbursement Program * Employee Referral Program * Safety Shoe and Safety Glasses reimbursement * Employee Discounts through BenefitHub * Advancement Opportunity. Position Summary: Put your maintenance and repair skills to good use at Vallen as a Lead Service Technician- Instrument, Fire, and Respiratory (IFR) in the Vallen Safety Services group. In this position, you will lead technicians in the inspections, testing, maintenance, and repairs to life safety equipment for established customers on a scheduled basis. Essential Job Duties and Responsibilities: * Responsible for the quality of service provided to our customers, ensure that Vallen personnel are following Vallen standard operating procedures, and that assigned HTS technicians are being properly trained and utilized. * May also have scheduling responsibilities. * Leads small groups or on-site service centers within area of expertise. * May be responsible for interacting with the customers to coordinate job activities. * Providing customer service in the area of Inspecting, Testing, Maintenance and Repairs of Life Safety Equipment. Including, but not limited to: Fire Extinguishers, Fire Hose, Gas Detection Monitors, Respiratory Equipment, Fall Protection Equipment and Safety Shower / Eyewash Units. * Responsible for ensuring all documentation associated with assigned tasks is filled out accurately, completely & turned in for proper invoicing. * Ensures all required copies provided to the customer upon servicing equipment. * Basic knowledge of regulatory standards pertaining to assigned duties, i.e., State, OSHA, and NFPA regulations, NFPA Guidelines and Vallen SOP's. * Responsible for Parts & Equipment requests. * Maintaining accurate inventories related to job and maintenance orders. * Assist shipping and receiving, unloading trucks, checking in merchandise, matching purchase orders to sales orders & distributing to sales associates for processing. * May include the use of company provided assets such as but not limited to: Company Vehicle, Inventory, Safety Equipment, Laptop, BR Scanner, Test Equipment, Tools, Radio, Cell Phone, Fuel Card and/or Credit Card. * Associates are required to maintain proper care of all assets as defined by Vallen policies. Job Qualifications: * High School or GED * Minimum 4 Certifications (manufacturer /state) in a related field * Minimum 5+ years related experience * Mechanically inclined * Advance communication, initiative, and problem-solving skills * Specific -- RELEVENT experience * Experience in the Inspection, Testing, Maintenance and Repair of Life Safety Equipment. * Advance industry segment knowledge. * Maintain minimum productivity of 90% within 60 days. * Demonstrated ability to successfully manage a Customer Acct or Project. * Ability to repair and service equipment sold by Vallen. * Current Motor Vehicle License with good driving record. * Commercial Driver's License required if carrying loads of hazardous materials. * Proficient with hand tools. * Able to complete repairs and maintenance of equipment in a timely and accurate manner. * Able to provide assistance, advice and training to Vallen associates and plant personnel. * Assist warehouse personnel with order fulfillment if needed. * Keep all certifications and licenses current and renewed by completing continuing education as required. * Ability to read, write and comprehend English (operational, process and quality instructions). Work Environment & Physical Demands: Reasonable accommodations will be evaluated and may be implemented to enable individuals with disabilities to perform essential functions of this position. * Working conditions will vary with service work being performed indoors and out in the field. * Possibility of working in hazardous environments when working within a plant which would require safety precautions and appropriate equipment. * Ability to work in climatic weather (cold/heat) during day or night operations. * While performing the duties of this job, the employee is regularly required to talk and hear. * Occasional lifting of items weighting a maximum of 55 lbs. * Ability to climb stairwells up to 15 levels high. * Ability to ascend and descend ladders (step, extension, cage) up to 24' high. * Able to walk at a normal pace for up to 15 continuous minutes. * Able to work from a standing position for 8-10 hours. * Bending, climbing, and stooping as needed for access of equipment to repair and service. * Pass all test requirements to be approved to work offshore. (If Applicable) Stay up to date with Vallen, and follow us on LinkedIn, Facebook and Twitter. Equal Opportunity Employer - Ethnically and Culturally Diverse/Females/Veterans/Disabled/Sexual Orientation/Gender Identity