Maintenance technician jobs in Silver Firs, WA - 1,449 jobs

🔧 Now Hiring: Maintenance Technician III We're seeking an experienced Maintenance Technician III to support equipment reliability and production uptime in a manufacturing environment. This role focuses on preventive, predictive, and corrective maintenance, troubleshooting electrical and mechanical systems, and supporting continuous improvement efforts. Key Responsibilities: Perform planned and unplanned maintenance on production and facility equipment Troubleshoot electrical, mechanical, hydraulic, and pneumatic systems Support equipment installations, modifications, and upgrades Utilize CMMS to document work and recommend maintenance improvements Follow safety standards including Lockout/Tagout procedures Qualifications: 6+ years of maintenance experience, or 4+ years with a trade certification Strong troubleshooting skills with electrical and mechanical systems Ability to read schematics and technical drawings Willingness to work rotating shifts and overtime as needed 💰 $28-$40/hour | Full benefits available

A fast-growing manufacturer in the electronics industry is seeking a Senior Maintenance Technician in the Mount Vernon, Washington area. Candidates Must Have: 5 years of plant maintenance experience in a highly automated manufacturing environment. Demonstrated electrical, mechanical, and PLC troubleshooting experience. Maintenance experience covering both electrical and mechanical/hydraulic systems. Demonstrated experience performing maintenance on electromechanical machines and equipment. Wiring experience is preferred for this role. *** Relocation assistance is available for this role if needed ***

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing's Global Real Estate and Facilities (GREF) organization is seeking a Maintenance Plumber to join our team in Everett, Washington. You will be supporting building & ground maintenance and initial installations. Our team supports a 24/7 operation, based on business needs. This role allows you to obtain a variety of skillsets, the opportunity to learn from knowledgeable colleagues, and to work on critical maintenance plumbing solutions for major Boeing sites. You will receive both on-the-job & formal training to enhance your technical skills, and backflow licensing is provided by the company. Incentives include additional pay for obtaining trade licenses paid by the company as well as receiving shift differential pay for second and third shift. This position is also eligible for overtime hours and pay. Position Responsibilities: Perform routine diagnosing, testing, and repairing of all types of plumbing lines and fixtures Repair, construct, install, rebuild, adjust, and modify plumbing lines and fixtures Layout, construct, maintain, diagnose, repair, adjust, modify, rebuild and test plant facilities plumbing, such as air, gas, and water, and drain line, sprinkler systems; gasoline pumps and related systems; high and low pressure steam equipment; liquid, air and vacuum pumps and accessories; pneumatic controls; various regulating and other valves; oxygen, hydrogen and hydraulic systems; boiler and furnace burners, baffles, pilot lights, governors, floats, strainers and oil pumps Perform work described in other maintenance classifications when incidental but necessary to the accomplishment of the assignment This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee Resumes of current Puget Sound Boeing employees submitted via “Find Jobs” in Boeing/Workday will be considered as this job is not installed in QTTP (Quality Through Training Program). Basic Qualifications 1+ years of experience in the plumbing or pipefitting trade Ability to perform work at heights up to 125 feet about ground level with appropriate safety gear and pass fall protection training Willingness to work any shift as required Preferred Qualifications: 1+ years of experience working with any of the following: backflow prevention, chemical process tank lines, or high-pressure steam systems 1+ years of experience working in an industrial/manufacturing environment Possess related plumbing certification (e.g., backflow, fitter) Typical Education & Experience: High school graduate or GED preferred. Relocation: Relocation assistance is not a negotiable benefit for this position. Candidates must live in the immediate area or relocate at their own expense. Drug Free Workplace Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This position is for all shifts Total Rewards & Pay Transparency At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay is based upon candidate experience and qualifications, as well as market and business considerations. Summary pay range: $33.32 per hour - $61.01 per hour Applications for this position will be accepted until Mar. 27, 2026 Language Requirements English Preferred Relocation Relocation assistance is not a negotiable benefit for this position. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Maintenance Mechanic Employment Type: Full-Time (Staffing-to-Permanent) Schedule: 4:30 AM- 1:00 PM Pay Rate: $28.00/h Essential Responsibilities Promptly performs troubleshooting assessments, repairs and maintenance functions in response to service calls and emergency calls plant wide. Performs schedule preventative maintenance on all processing equipment as assigned by Maintenance manager. Conducts daily inspections on equipment. Completes routine maintenance and repairs on processing equipment & building. Follows all company safety policies and procedures. Responds to change productively and handles other duties as required. Required Qualifications Basic electrical knowledge is a plus Welding skills a plus Motivated self-starter who is able to work both independently and as a team Ability to communicate clearly both verbally and in writing Mandatory Requirements ✅ Authorized to work in the U.S. (E-Verify participation) ✅ Background check clearance ✅ Drug test required Benefits Package (After 90 Days) ️ 10 days PTO per year (with 3-year carryover) Medical, Dental, and Vision Insurance ️ All PPE provided (except shoes and pants)

Maintenance Technician /Supervisor Duration: Fulltime Role A Maintenance Technician is responsible for performing facility and process equipment preventative maintenance, attending to equipment downtime as required, and completing various projects related to maintenance and engineering requests. Essential Duties and Responsibilities Provide recommendations to improve preventative/predictive maintenance tasks to optimize equipment availability. Adhere to work orders and utilize CMMS system for data entry. Perform unplanned and planned (preventative and predictive) maintenance on production and facility equipment as required, utilizing a Computerized Maintenance Management System (CMMS) to record work completed. Diagnose basic to medium complex electrical systems mechanical components, pneumatic components, and controls to identify hazards, defects, and need for adjustments, repairs, or programming. Maintain and perform repairs on equipment to restore them to proper, safe, and optimal working conditions. Support installation, set up, modification, and relocation of equipment to accommodate or improve production requirements. Read electrical and electronic schematics/diagrams, and basic hydraulic and pneumatic diagrams. Test low voltage electrical and electronic equipment and components for continuity, current, voltage, and resistance. Skills Ability to read wiring diagrams, electrical/mechanical/pneumatic/hydraulic schematics, and ladder/function block logic. Working knowledge of industrial PCs and PLCs (Siemens Step 7, Beckhoff TwinCat, etc.) and electric circuitry consisting of contactors, relays, main voltage/control voltage, limit switches and proximity sensors Knowledge of equipment set up, functions, operating procedures, and preventative maintenance techniques. Ability to trouble shoot on electrical and mechanical equipment, PLC systems, Robots, AC & DC drives, servo drives, motion controls, safety sensors, and relays. Education and/or Experience 4-5 years of maintenance experience or 2 years of experience with one of the following: 309A - Electrician 433A - Industrial Mechanic

Responsibilities: Implement new equipment technologies for manufacturing and quality improvements including equipment upgrades, process technologies, tooling, and manufacturing techniques. Supervise and plan the installation, testing, operation, maintenance, and repair of equipment and process within the facility. Coordinate product and process design and changes. Confer with management, production, and marketing/sales staff to discuss project specifications and procedures. Analyze technology, resources, needs, and market and customer demands, to plan and assess the feasibility of projects. Perform administrative functions such as reviewing and writing reports, enforcing rules, and assisting in decisions about the purchase of materials or services. Present and explain proposals, reports, and findings internally and externally. Participate in purchasing maintenance materials and outside technical services in accordance with established company protocol and procedures. Assist in the establishment and implementation of systematic preventative maintenance program with the Maintenance and Reliability Manager. Investigate equipment failures and unexpected breakdowns. Provide corrective actions to improve reliability and performance. Supervise PM and PD (preventive and predictive maintenance) plans with the use of automated software packages. Monitor parts requests to ensure adequate inventory and cost efficiencies are being met according to departmental budget. Lead CI (continuous improvement) tasks reporting back to management with status updates. Ensure equipment and processes are running optimally at all times. Provide technical support to our production team and perform other tasks as needed. Facilitate selection of appropriate resources (contractors, suppliers, etc.) to minimize costs and assure on time and on budget completion. Ensure, enforce, and adhere to all legislative requirements. Constantly enhance the motivation and team-spirit of all operation staff. Minimize the risk of accidents and pollution. Qualifications: Strong knowledge of engineering concepts including electrical, mechanical and robotics system. Able to read wiring diagrams, electrical/mechanical/pneumatic/hydraulic schematics, and ladder/function block logic. Working knowledge of industrial PCs and PLCs (Siemens Step 7, Beckhoff Twin Cat) and electric circuitry consisting of contractors, relays, main voltage/control voltage, limit switches and proximity sensors Proficient in Microsoft Office Ability to work cross-functionally with effective interpersonal and communication skills. Ability to work independently and as a part of a team. Detailed oriented individual capable of time and project management. Excellent troubleshooting and problem-solving skills. Education and/or Experience Bachelor's degree in engineering or related field or equivalent work experience. 2 to 3 years' experience in supervisory position. Experience in working with ABB robots, preferred. Experience in highly automated environments, preferred. Some fabrication experience preferred. Salary: $85k-$100k

Korry, a leading provider of aerospace electronics, is seeking a highly skilled Senior Electronics Technician to join our team. In this role, you will be a critical part of our production line, tackling complex technical challenges and ensuring the quality and reliability of our aerospace-grade components. This is not a typical assembly or repair role; we need a true problem-solver with deep technical knowledge who can diagnose intricate issues at a component level. What You Will Do Troubleshooting & Diagnosis: Independently perform in-depth troubleshooting of complex functional test failures on electronic and electro-mechanical assemblies. This includes diagnosing issues down to the component level (e.g., resistors, capacitors, integrated circuits). Root Cause Analysis: Utilize advanced diagnostic tools and techniques to identify the root cause of failures, rather than just replacing parts. Testing & Repair: Conduct a variety of electronic tests and repairs on aerospace components, ensuring compliance with strict industry standards. Technical Documentation: Read and interpret complex technical drawings, schematics, and wiring diagrams to guide your work. You will also be expected to accurately document all repair and test data. Mentorship: Act as a technical resource and mentor for junior technicians, sharing your expertise and helping to solve challenging production issues. Continuous Improvement: Identify and recommend improvements to existing test procedures, equipment, or documentation to enhance efficiency and quality. Preferred Education: An Associate's Degree in Electronics Technology or a related field, or equivalent military training. Preferred Experience: A minimum of 4+ years of hands-on experience in electronics manufacturing, troubleshooting, and repair. Preferred Specialized Skills and Experience: Proficiency in reading and interpreting complex electrical schematics and wiring diagrams. Demonstrated experience with advanced diagnostic equipment, such as oscilloscopes, digital multimeters (DMMs), spectrum analyzers, and signal generators. Strong understanding of both analog and digital electronics, including circuit theory, power supplies, and signal integrity. Proven ability to perform component-level soldering and rework on intricate printed circuit boards (PCBs). Previous experience working in a highly regulated environment, with specific knowledge of FAA Part 145 regulations, is highly preferred. The ability to work under limited supervision, prioritize tasks, and independently solve complex technical problems. Schedule: Day Shift, Monday - Friday, 6:00am to 2:30pm. Occasional overtime, including weekends, may be required to meet production deadlines. Salary Range Please note the typical hiring range is $40.00 - $50.00 hourly. Job offers within the range are based on significant job qualifications and pay equity. Company Description: Eligible candidates must be authorized to work in the U.S. This position requires access to export control information. To conform to US Export Control regulations, applicant should be eligible for any required authorizations from the US Government. Korry Electronics is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of age, race, color, religion, sex, sexual orientation, gender identity or expression, medical condition, national origin, marital status, disability, pregnancy or parental status, childbirth, genetic information, or military and veteran status. Thank you for your interest in Korry Electronics! Our company culture is focused around ownership, transparency, process improvement and trust & respect. We are looking for talented people (like you!) to lead our business to the next level while giving you the opportunity to develop your own career. We have been at the forefront of the aviation industry since the beginning, creating the first lighted cockpit controls for the military and commercial aircraft industry. The Korry product team continues this tradition as it develops the crew station of the future, providing state-of-the-art switches, cockpit controls, high-performance displays, and night-vision filters. We are passionate about what we do. For more information, please visit ************** Join the Korry team and find out why this is such a great place to spend your career! Korry Electronics is proud to be an equal opportunity workplace and is an affirmative action employer. We are committed to equal employment opportunity regardless of age, race, color, religion, sex, sexual orientation, gender identity or expression, medical condition, national origin, marital status, disability, pregnancy or parental status, childbirth, genetic information, or military and veteran status.

Summary/General Description Of Job: Incumbent uses various tools, testing instruments and equipment to install, inspect, repair, maintain, adjust and troubleshoot various pieces of electrical equipment. Essential Duties & Job Functions: • Performs a variety of electrical trade functions such as the installation, maintenance, or repair of equipment for the generation, distribution, or utilization of electric energy. • Installs or repairs any of a variety of electrical equipment such as generators, transformers, switchboards, controllers, circuit breakers, motors, heating units, conduit systems, or other transmission equipment. • Works from blueprints, drawings, layouts, or other specifications. • Locates and diagnoses trouble in the electrical system or equipment. • Works standard computations relating to load requirements of wiring or electrical equipment. • uses a variety of electrician's hand tools and measuring and testing instruments. • Work of the maintenance electrician requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience. • Troubleshoots and evaluates electrical systems. • Performs other related duties as assigned. May perform work in other classifications when incidental work is necessary to the accomplishment of the work assignment. Significant work in another job classification may be required if accompanied by any wage adjustments applicable. Accountable For: • The proper use of tools and equipment commonly used in the Electrical Maintenance field. • Completing all mandated training requirements per government and management directives. • Timely and cost effective performance of duties. • Timely completion and accuracy of all departmental work. • Dealing with a variety of people in a professional, courteous manner in diversified situations. • Adherence to established company safety policies and good industrial and office safety practices. • Compliance with company Standard Operating Procedures and Personnel policies and procedures. • Having the ability to work well under pressure. Job Requirements (Education, Experience, Professional Associations): Mandatory • Four (4) years' experience in electrical maintenance work. • Ability to read blueprints, bend conduits, troubleshoot, repair motors and controls, and install and repair AC and DC equipment. • Ability to demonstrate a thorough knowledge of switches, transformers, and transformer hook-ups. • Must have ability to work on electrical equipment located at various heights • Must obtain and maintain required explosives certifications when assigned to ordnance operations. • Must have and maintain hand tools of the trade to perform the normal work of the classifications. • Ability to troubleshoot equipment. • Ability to meet and maintain company physical and security requirements, including respirator qualification, and clearance eligibility when required. • Must possess good communication skills for a service team environment. • Valid state driver's license with acceptable driving record. • Ability to successfully pass any background checks and/or drug testing required on the contract. • U.S. Citizenship. $46.78 per hour to $49.11 (EL01) per hour Competitive pay and top-shelf benefits package supporting our national defense. Our facilities team serves a diverse range of high-value national strategic missions. Benefits package with United Steelworkers valued at over $10+ / hour includes: - Paid vacation. Two weeks at one year, grows to three weeks after five years and four weeks after ten years. - Personal Leave 1 hour of paid Personal/Sick leave for every thirty (30) hours worked. - Pension and 401K - Medical, dental, vision and life insurance - 11 Paid Holidays

The KFC Team Member is the first face that customers see when they walk through the door or first voice they hear when they place a drive-thru order so YOU will set the tone for the KFC customer experience and bring the great KFC tastes to life. This is a very important job for a friendly, helpful individual who enjoys working in a fast-paced environment and paying attention to detail. Key responsibilities include taking orders or preparing food, assisting in resolving any service or food issues, maintaining food-safety standards and maintaining a clean, safe work and facility environment. The entire team works together to accomplish all daily restaurant tasks. A successful candidate will have a clean and tidy appearance, good work habits and a positive attitude. If you want to build a great career while providing fast, fun and friendly service to our customers, KFC is the place to learn, grow and succeed! Requirements: The minimum age to work with the Northwest Restaurants family of restaurant companies is 16 years or older.

We move people. We help them get to work, school, or play. From A to B, and everything in between. By shuttle, bus, charter or valet, we find creative ways to move people, business, and communities forward. We partner with some of the world's leading companies to create personalized transportation systems and hospitality experiences. We go above and beyond to remove stress in all interactions and make things a little easier for all we serve. As an Electro Mechanic/ Fleet Electrification Technician, you will play a key role in supporting the transition of our fleet from traditional fuel-powered vehicles to electric and hybrid technologies. Youll be responsible for maintaining, diagnosing, and repairing electric vehicle (EV) systems and components, while also supporting infrastructure-related needs and working closely with both internal teams and external partners. This is an exciting opportunity for a forward-thinking technician who is passionate about sustainability, innovation, and continuous learning. Compensation: $40.00 - $50.00 / hour with a $7,500 sign on bonus Benefits: Medical, Dental, Vision & Life Insurance 401k with matching Annual pay raises Quarterly safety performance bonuses Holiday pay Uniforms provided Paid Time Off- up to 80 hours per year with increasing amounts based on your years of service Paid DOT medical card & physicals Responsibilities: Perform maintenance, diagnostics, and repairs on electric and hybrid fleet vehicles, including battery systems, electric drivetrains, regenerative braking systems, and power electronics. Collaborate with internal Fleet and Facilities teams to support the installation, operation, and maintenance of EV charging infrastructure. Stay current on emerging EV technology and participate in training related to OEM and aftermarket systems. Utilize diagnostic tools and software to identify and resolve issues efficiently. Document all repairs, services, and inspections in fleet management systems (e.g., Fleetio). Assist in the development and implementation of electrification service protocols and safety procedures. Monitor and report on EV performance data to help optimize usage and lifecycle performance. Maintain a clean, safe, and organized work environment that supports high-voltage safety standards. Support vehicle conversions, software updates, and system retrofits as required. Provide technical support and guidance to other Fleet team members as electrification efforts expand. Other duties as assigned. Requirements: High school diploma or GED required, technical or vocational training in EV systems, automotive technology, or related field preferred 24 years of experience in vehicle maintenance, with at least 1 year working on electric or hybrid vehicles preferred Understanding of high-voltage safety practices and procedures Familiarity with EV systems including batteries, inverters, electric motors, and charging equipment Proficiency in the use of diagnostic tools and related software Comfortable working with both mechanical and electrical systems Strong attention to detail, documentation, and communication skills Valid drivers license required; CDL A license is a plus ASE Certification in Electric Vehicles or Light/Heavy Duty Systems preferred or willingness to obtain Able to communicate proficiently in English Able to work independently, yet able to take direction Able to pass a criminal background check TransWest Culture: Come join our close-knit team. We enjoy having summer BBQs, holiday parties, games, contests and so much more at our bus yards and in the office. Our Commitment to Diversity, Equity, Inclusion, and Belonging:At TransWest, we pride ourselves on building a diverse workforce and collaborative spaces where people of different lived experiences, backgrounds, abilities, and identities can thrive. Everyone on the team at TransWest emphasizes and practices our core values every day that are based on continued growth, reliability, safety, caring for our work, clients, and each other. Our commitment to diversity, equity, and inclusion is an evolving area where we will continue to listen and learn from our team members, business partners, community partners, and thought leaders to optimize our impact.

Join Amrize as a Maintenance Technician- Cement Plant and help construct whats next. If you're ready to put your skills to work on projects that matter - and build a career with a company that's building North America - we want to hear from you! ABOUT THE ROLE The Maintenance Technician is responsible for the safe inspection, repair, installation, and maintenance of all plant equipment and systems to ensure optimal plant performance. This role supports reliable operations by performing both preventive and corrective maintenance on mechanical, hydraulic, and pneumatic systems while maintaining a strong commitment to safety and teamwork. WHAT YOU'LL ACCOMPLISH * Perform preventive and corrective maintenance on all plant equipment, including conveyors, pumps, crushers, dryers, separators, gearboxes, and rotary equipment. * Inspect, troubleshoot, and repair mechanical systems to minimize downtime and improve reliability. * Fabricate, weld, cut, and assemble mechanical components or replacement parts as needed. * nstall, align, and move mechanical equipment according to engineering specifications and drawings. * Safely operate mobile equipment such as forklifts, man lifts, and service trucks as required. * Support and comply with all Amrize Safety Policies, including Lockout/Tagout (LOTO), Working at Heights (WAH), and confined space procedures. * Document maintenance activities accurately and communicate findings to plant management. * Collaborate with production, electrical, and operations teams to schedule and complete work efficiently. * Participate in safety meetings, training, and continuous improvement initiatives. * Assist with plant clean-up and other support activities as needed to maintain safe, efficient operations. * Demonstrate a commitment to communicating, improving and adhering to health, safety and environmental policies in all work environments and areas. Promote a culture of safety and exhibit these behaviors. WHAT WE'RE LOOKING FOR Education: High school Diploma or equivalent. Required Work Experience: 3+ years of experience in industrial maintenance or millwright work (cement, aggregates, mining, or heavy manufacturing environment preferred). Mobile equipment operation experience preferred (forklift, man lift, loader, etc.). Additional Requirements: * Occasional overtime, weekend, or call-in work may be required. * Working knowledge of mechanical, hydraulic, pneumatic, and basic electrical systems. * Skilled in welding, cutting, grinding, drilling, and mechanical assembly. * Ability to read and interpret mechanical drawings, schematics, and equipment manuals. * Demonstrated ability to plan and prioritize maintenance activities independently or within a team. * Ability to work safely in varied environmental conditions and around heavy equipment. * Demonstrate strong skills in problem-solving, decision making and multi-tasking * Strong mechanical aptitude with diagnostic and problem-solving skills. * Works collaboratively and respectfully with peers, management, and vendors. * Successful candidates must adhere to all safety protocols and proper use of Amrize approved Personal Protection Equipment ("PPE"), including but not limited to respirators. Employees that are required to wear respirators must be clean shaven where the respirator seal meets the face in order to pass the qualitative and quantitative fit tests. WHAT WE OFFER * Hourly Wage: $41.55 - $46.55/Hourly * Comprehensive Healthcare Plan benefits for you and your dependents as outlined in the CBA * A Retirement Plan designed to support you through various stages of your career and life, as outlined in the CBA * Healthy Living support through an EAP, offering confidential assistance for work, health, or life challenges for you and your household * Perks & discounts on a variety of products and services * An inclusive and welcoming environment where everyone can be themselves * A collaborative work culture in a supportive and team-oriented work environment * Company-provided personal protective equipment ensuring your safety and comfort on the job As part of our dedicated focus on the health and safety of all employees, a pre-employment medical, including drug and alcohol testing and a criminal record check, will be required. Amrize is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. We thank all applicants for their interest; however, only those selected for an interview will be contacted. BUILDING INCLUSIVE WORKSPACES At Amrize, there is endless opportunity for you to play your part. Whether you're in a technical, managerial, or frontline role, you can shape a career that works for you. We're seeking builders, creative thinkers and innovators. Come put your expertise to work while developing the knowledge and skills to drive your career forward. With us you'll have the chance to build your ambition! Amrize North America Inc. takes pride in our hiring processes and our commitment that all qualified applicants will receive consideration for employment without regard to age, race, color, ethnicity, religion, creed, national origin, ancestry, gender, gender identity, gender expression, sex, sexual orientation, marital status, pregnancy, parental status, genetic information, citizenship, physical or mental disability, past, current, or prospective service in the uniformed services, or any other characteristic protected by applicable federal, state or local law. Amrize North America Inc, and its respective subsidiaries are Equal Opportunity Employers, deciding all employment on the basis of qualification, merit and business need. Amrize Canada Inc. is committed to the principles of employment equity and encourages the applications from women, visible minorities, and persons with disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request accommodation in order to apply for a position with us, please email recruiting-accommodations@amrize.com. This email address should only be used for accommodations and not general inquiries or resume submittals. In Ontario, our organization/business is committed to fulfilling our requirements under the Accessibility for Ontarians with Disabilities Act. Under the Act, accommodations are available on request for candidates taking part in all aspects of the selection process. While we sincerely appreciate all applications, only candidates selected for an interview will be contacted.

Performs work as part of a team in an industrial laundry facility. Responsible for the safe, expeditious, and accurate performance of routine tasks in reference to a daily preventative maintenance schedule in and around the laundry facility. • Responsibilities/Essential Functions: Essential duties and responsibilities of the position include, but are not limited to: Maintaining all plant equipment, including high-volume industrial washers and or dryers. Repairs and replaces equipment when necessary; Performs basic plumbing, mechanical, and electrical work. Ability to troubleshoot and solve technical issues by following technical manuals and schematics; Orders necessary parts, tools, and equipment in a timely manner by following company procurement policy; Maintains a proper Daily Schedule Control for equipment maintenance and preventative maintenance schedule and record; Conducts daily removal and processing of waste solids generated from treatment process; Performs equipment troubleshooting, makes necessary repairs, and completes preventative maintenance and housekeeping practices for all related wastewater hardware; Maintains safe and clean work environment, and observes best practices in all production activities; Uses safety precautions, follows electrical lock-out tag-out procedures for equipment, and adheres to all safe work practices and policies for all safety, boiler, and wastewater treatment procedures; Other duties as required or assigned • Knowledge/Skills/Abilities: Demonstrated mechanical and basic electrical aptitude; Familiar with standard maintenance procedures, preventative maintenance schedules, and proper safety techniques; Basic knowledge of industrial laundry equipment and required codes; Ability to comprehend and perform all required training, written, and verbal instructions; Good verbal and/or written communication skills; Ability to work independently and as part of a team; Ability to meet attendance schedule; Work is based on a shift schedule, and may include weekends. Overtime is required as needed. • Working Environment/Safety Requirements: Work is performed in a high-volume production warehouse setting and regularly exposed to outside weather conditions, extreme heat and cold conditions as well as dust and noise. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions; Requires the ability to routinely move, lift, carry, push, or pull items weighing up to 25 lbs, and occasionally up to 50 lbs; Requires bending, reaching, pulling, pushing, twisting, and lifting; Requires the use of hands for grasping and other manipulations; Requires standing and walking for long periods of time; Must be able to work from elevated heights using ladders, mezzanines, and aerial lifts. • Education: High school diploma or equivalent required; 3-5 years' maintenance experience Benefits: Vestis offers a wide array of comprehensive benefit programs and services, including medical, dental, vision, and pension. Employees are eligible for 40 hours of vacation and 8 hours of floating holidays every year. Employees will also receive 6 paid holidays throughout the calendar year. Compensation: The hourly rate that Vestis reasonably expects to pay ranges from $29.45 to $36.21, depending on circumstances, including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Location: Kent, WA

Performs work as part of a team in an industrial laundry facility. Responsible for the safe, expeditious, and accurate performance of routine tasks in reference to a daily preventative maintenance schedule in and around the laundry facility. - Responsibilities/Essential Functions: Essential duties and responsibilities of the position include, but are not limited to: Maintaining all plant equipment, including high-volume industrial washers and or dryers. Repairs and replaces equipment when necessary; Performs basic plumbing, mechanical, and electrical work. Ability to troubleshoot and solve technical issues by following technical manuals and schematics; Orders necessary parts, tools, and equipment in a timely manner by following company procurement policy; Maintains a proper Daily Schedule Control for equipment maintenance and preventative maintenance schedule and record; Conducts daily removal and processing of waste solids generated from treatment process; Performs equipment troubleshooting, makes necessary repairs, and completes preventative maintenance and housekeeping practices for all related wastewater hardware; Maintains safe and clean work environment, and observes best practices in all production activities; Uses safety precautions, follows electrical lock-out tag-out procedures for equipment, and adheres to all safe work practices and policies for all safety, boiler, and wastewater treatment procedures; Other duties as required or assigned - Knowledge/Skills/Abilities: Demonstrated mechanical and basic electrical aptitude; Familiar with standard maintenance procedures, preventative maintenance schedules, and proper safety techniques; Basic knowledge of industrial laundry equipment and required codes; Ability to comprehend and perform all required training, written, and verbal instructions; Good verbal and/or written communication skills; Ability to work independently and as part of a team; Ability to meet attendance schedule; Work is based on a shift schedule, and may include weekends. Overtime is required as needed. - Working Environment/Safety Requirements: Work is performed in a high-volume production warehouse setting and regularly exposed to outside weather conditions, extreme heat and cold conditions as well as dust and noise. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions; Requires the ability to routinely move, lift, carry, push, or pull items weighing up to 25 lbs, and occasionally up to 50 lbs; Requires bending, reaching, pulling, pushing, twisting, and lifting; Requires the use of hands for grasping and other manipulations; Requires standing and walking for long periods of time; Must be able to work from elevated heights using ladders, mezzanines, and aerial lifts. - Education: High school diploma or equivalent required; 3-5 years' maintenance experience Benefits: Vestis offers a wide array of comprehensive benefit programs and services, including medical, dental, vision, and pension. Employees are eligible for 40 hours of vacation and 8 hours of floating holidays every year. Employees will also receive 6 paid holidays throughout the calendar year. Compensation: The hourly rate that Vestis reasonably expects to pay ranges from $29.45 to $36.21, depending on circumstances, including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Location: Kent, WA Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

Job DescriptionBenefits: 401(k) Company parties Dental insurance Employee discounts Health insurance Opportunity for advancement Training & development Vision insurance TITLE: MAINTENANCE TECHNICIAN The maintenance mechanic must have a passion for machines, equipment, and teaching others how they work. Ability to work autonomously to balance day-to-day needs and preventative maintenance activities. You will be a fundamental member of the manufacturing team, collaborating with operations, quality, and leadership. RESPONSIBILITIES include but are not limited to; Responsible for ensuring equipment is ready for production start-up in timely manner. Responsible for repairs on worn out or damaged equipment. Perform needed equipment modification and fabrication. Perform proper preventive maintenance on all equipment. Must have a good working knowledge of Good Manufacturing Practices (GMP) and Good Sanitation Practices (GSP). Follow all safety rules and practices the plant. Must be able to work in a fast paced environment. Must be a team player and support production in anyway to achieve production goals. Must be able to work independently to complete assign projects and regular PM schedules. Must have good computer knowledge and able to create related document when needed. Perform work, speeds, and efficiencies at company standards. Develop and implement maintenance procedures for equipment. Develop and implement innovations to improve efficiency, safety, up-time and reduce maintenance costs. Will lubricate equipment with a thorough understanding of requirements for a variety of devices and applications. Perform welding and cutting of metals. Train personnel on autonomous maintenance and minor repairs and adjustments. Completes work orders and Preventive Maintenance (PM) documentation. Keep maintenance spaces (shop) and parts/equipment clean and organized. Maintain storeroom inventory (INV). Maintain equipment bill of material (BOM) as assigned. Ability to read and interpret documents such as equipment manuals, safety rules, good manufacturing processes (GMP's) and general instructions. Effective communication skills are required (written and oral). Ability to work safely around/with automated and semi-automated machinery. performing all tasks in a safe manner, adhering to Company work rules. Performs housekeeping and cleaning duties, according to Company SOP's before equipment is put back into production. Perform all other work as required. Qualifications and Requirements; Minimum High school diploma or GED required. 3+ years of mechanical manufacturing experience required. 3+ years of maintenance experience required. Prior experience working in a food manufacturing facility required. Able to work with and around cleaning chemicals and perform all sanitation duties. Welding and metal fabrication knowledge and ability required (MIG and TIG). Must be able to read and comprehend mechanical drawings. Must be able to read and understand a multimeter. Strong knowledge of basic math skills is required. Ability to read, write and communicate effectively. Good understanding of GMP and food safety concepts. Must be able to comply with attendance policy. Must possess computer skills and have aptitude to work with computers. Able to work as part of a team. Must be able to work safely around food allergens, primarily tree nuts. Must be dependable, reliable and have good attendance. Have a good attendance record and be able to comply with attendance policy. Physical Demands: Frequently required to stand and use hands to finger, handle, or feel. Occasionally required to reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. Able to routinely lift up to 50 pounds. Occasionally lift up to 100 pounds with assistance. Hours are: Monday - Thursday 5:45am - 4:15pm, must be available to come in on some Fridays, on call.

Packaging and distribution company is seeking a highly skilled Senior Industrial Maintenance Technician to support our production and facility operations by performing advanced maintenance, repair, and troubleshooting on a wide range of industrial equipment. Job Title: Industrial Maintenance Mechanic Location: Auburn, WA Pay: $30/hr. - $35/hr. (DOE) Schedule: Monday-Friday, 6:00 AM - 2:30 PM Benefits Offered: Paid Weekly, Paid Training, Paid Sick Leave, Affordable Healthcare Plan, Simple IRA (401K) Employment Type: Full-Time Position Summary: As an Industrial Maintenance Mechanic, you will play a crucial role in ensuring the reliability and efficiency of our production equipment. This role is responsible for ensuring maximum equipment uptime through expert-level work on electrical, mechanical, hydraulic, pneumatic, and automated control systems. The Senior Technician will diagnose complex issues, execute preventive maintenance programs, and interpret technical schematics and equipment documentation with precision. In addition to hands-on technical work, this position provides leadership within the maintenance team by mentoring junior technicians, coordinating repair efforts, and contributing to continuous improvement initiatives that enhance safety, efficiency, and overall operational performance. This is a critical role in a fast-paced industrial environment and requires strong problem-solving skills, attention to detail, and a commitment to maintaining high standards of safety and reliability. Leading or mentoring less-experienced maintenance staff; coordinating maintenance activities; possibly managing contractors. Ensuring minimal downtime, supporting continuous improvement initiatives, maintaining maintenance logs, spare-parts inventories, and safety/compliance protocols. Often working in a manufacturing or industrial plant environment, may require shift work (2nd/3rd shift), sometimes overtime or on-call response. The “senior” level implies significant experience (often 5-10 + years), mastery of multiple trade disciplines (electrician, instrumentation, mechanical), and often supervisory or lead responsibilities. Required Knowledge, Skills, and Experience: Minimum of 5 years of experience as an Industrial Maintenance Mechanic in a fast-paced manufacturing environment. Strong understanding of AC and DC motors, VFD drives, and electrical troubleshooting. Proven ability to effectively perform preventive maintenance tasks to enhance equipment reliability. Proficient in interpreting mechanical blueprints, electrical schematic drawings, and PLC logic diagrams. Relevant trade or technical school training preferred. Ability to lift, push, and pull up to 50 pounds frequently and up to 100 pounds occasionally using proper techniques. Strong problem-solving skills and a proactive approach to maintenance challenges. Excellent communication skills and the ability to work collaboratively within a team. New Era Staffing & HR Solutions is an Equal Opportunity Employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin. #NEHRS

Job Title: Facilities Maintenance Support Department: Facilities Date Prepared: December 2025 Reports To: Facilities Manager Prepared By: Human Resources FSLA Status: Non - Exempt, Full-time Approved By: Executive Director Compensation : $25.00 to $30.00 per hour Summary: The Facilities support will support all aspects of SVDP location functions and ensures the safety and functionality of all facilities. Essential Duties & Responsibilities/ Maintenance : The duties and responsibilities of this position shall include, but not be limited to the following. Other duties and responsibilities assigned as needed by supervisor. Apply related general maintenance skills, such as painting and drywall, installing doors and locks and performing other related tasks. Knowledge and ability to use hand and power tools. Perform minor electrical tasks such as replacing burnt lights, fixing broken outlets, and handling data/power cable installations. Carry out plumbing works including replacing faucets, unclogging drains, installing/replacing sink and repair leaks. Perform facility repairs, installations, small construction remodeling, preventive and corrective maintenance all properties. Perform landscaping and grounds maintenance of all properties. Must be able to come in during off-hours when emergencies arise. Demonstrate familiarity with HVAC systems and the ability to operate and troubleshoot AC units. Maintains clean and organized workspace and warehouse at all times. Maintain an updated record and inventory of equipment and tools in the warehouse. Complete tasks and projects in a time manner, within the planned timeframe and with expected quality. Work directly with supervisor and other management to insure that all facilities are maintained in proper working condition. Work within the framework of the Society's mission and objectives. Work with the proper attitude that exemplifies the Society's Statement of Values. Minimum Qualifications/ Maintenance : In order to perform the essential duties and responsibilities of this position, an individual must posses the knowledge, training, skills and experience indicated by the following. Education/Experience Two to Five years of experience in construction, maintenance, or repair work; Training and experience equivalent to one of the employment standards listed above that provides the required knowledge and abilities. Language Ability Must have the ability to read and comprehend simple instructions and to communicate as necessary with supervisor and other employees. Certificates and Licenses Valid Washington State Driver's license Supervisory Responsibilities No Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to see and talk. Employee must be able to lift and carry objects weighing 50 lbs. for short distances and must be able to push and pull objects weighing up to 200 lbs. Employee must also be capable of the following: Be able to stand, walk, and lift for a substantial part of each shift. Have well-developed fine motor control and the ability to grasp, handle, finger, and manipulate small and large items. Have full range of body motion with the ability to regularly reach above head, stoop, bend, twist, and squat. Be able to perform repetitive fine motor functions with fingers, wrists, arms and waist. Must be able to move across a wide variety of surfaces including, but not limited to, ramps, stairs, and move over objects that may be in employee's path. Equal Opportunity Employer: We are committed to diversity, equity, and inclusion in our workplace.

Job Details Division: Nucor Steel Seattle, Inc. Other Available Locations: N/A Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Compensation Data Status: Hourly Non-Exempt Grade Range: 5 - 8 Average Annual Earnings Range: $132,045.51 - $152,831.08 Teammates in at Nucor are eligible for an additional profit sharing bonus on top of their regular earnings. Profit Sharing 5 - Yr Avg: 20.17%.Basic Job Functions: Nucor Steel Seattle is accepting applications for the position of Plant Maintenance Mechanic. The Plant Maintenance Mechanic will report to the Mechanical Lead and Mechanical Supervisor in either the Melt Shop or Rolling Mill. Plant Maintenance Mechanics must be committed to their own personal safety as well as the safety of others around them. Plant Maintenance Mechanics will be required to troubleshoot complex mechanical systems, individually or as a part of a team of other maintenance and production personnel. Plant Maintenance Mechanics must be able to function safely in a high stress environment and will be responsible for maintaining all production and auxiliary support equipment in a craftsman-like manner. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.Minimum Qualifications: * Minimum 5 years of industrial maintenance experience in a heavy manufacturing or steel environment.• Proven ability to troubleshoot, repair, and rebuild mechanical, hydraulic, and pneumatic systems.• Skilled in Stick and MIG welding, fabrication, and basic machining practices.• Proficient with precision alignment, rigging, and use of standard maintenance tools.• Working knowledge of LOTO, confined space, and other industrial safety procedures.• Willing to work a rotating schedule, including weekends, nights, and holidays as needed.Preferred Qualifications: Working knowledge of O.S.H.A 1910.179, CMAA 78, and applicable ASME regulations Machinery installation/machinery alignment experience Trained and experienced with overhead crane maintenance and safety Experience and training with variable frequency drives Melting, casting, long product experience Nucor is an Equal Opportunity/Affirmative Action Employer - M/F/Disabled/Vets - and a drug - free workplace

At Boeing, we innovate and collaborate to make the world a better place. We're committed to fostering an environment for every teammate that's welcoming, respectful and inclusive, with great opportunity for professional growth. Find your future with us. Boeing Commercial Airplanes is excited to offer opportunities for an Aviation Maintenance Inspector to join our Field team in Everett, Washington. As an Aviation Maintenance Inspector, you will be instrumental in upholding the highest standards of quality and safety within our aircraft maintenance operations. Your primary responsibility will be to conduct thorough inspections of aircraft structures, systems, and components, ensuring compliance with industry regulations and safety protocols. You will meticulously evaluate maintenance work, troubleshoot issues, and document any nonconforming materials or processes to maintain rigorous quality assurance. A Color Vision Certification may be necessary for portions of this job. Your expertise will be essential in performing airworthiness inspections and coordinating with regulatory bodies, ensuring that all aircraft are flight-ready and meet stringent specifications. You will play a critical role in upholding our commitment to safety and quality standards, ensuring that all operations meets regulatory compliance and operational excellence. If you are detail-oriented, possess strong technical skills, and thrive in a collaborative environment, we invite you to apply and be a part of our mission to deliver excellence in aviation. Position Responsibilities: Conduct audits and surveillance of all manufacturing and quality assurance processes, ensuring compliance with specifications, processes, and procedures. Perform quality functions, including customer and FAA coordination, configuration change verification, conformity inspections, and airworthiness inspections (both pre-flight and post-flight). Initiate and document any nonconforming materials, hardware, software, tools, parts, or assemblies in accordance with established specifications and procedures. Utilize technical specifications, sketches, manuals, and FAA publications to effectively accomplish inspection assignments. Maintain all company and FAA-required records and inspection forms, ensuring accuracy and compliance. Uphold a safe, clean, and organized work environment while planning and organizing work packages to promote efficient operations and meet predetermined schedules. Operate various information systems, including company web-based systems and Microsoft Office products, to perform assigned tasks. Interpret and adhere to airworthiness directives, service bulletins, and other approved data to ensure compliance. Apply mathematical calculations to set up and use precision measuring tools for accurate measurements of gaps, heights, angles, and hole dimensions. Create production aids as needed to facilitate inspection assignments. Maintain necessary certifications, licenses, and permits required for the role. Exchange information with suppliers, customers, and company representatives to explain or demonstrate operations, tests, or any difficulties encountered. Physical Demands and Potential Hazards: Perform physical tasks that include lifting weights up to 35 lbs. Engage in various movements such as reaching, handling, turning, twisting, lifting, lowering, climbing, balancing, bending, kneeling, crouching, and squatting. Work in environments that may involve contact with metals, solvents, and coolants. Operate in proximity to moving parts and tools, sharp cutters, and potential slipping hazards. Adapt to varying noise levels and atmospheric conditions. Utilize personal safety gear to protect face/eyes, hands/arms, and feet while performing job duties. This position is expected to be 100% onsite. The selected candidate will be required to work onsite at one of the listed location options. This position must meet Export Control compliance requirements, therefore a “US Person” as defined by 22 C.F.R. § 120.15 is required. “US Person” includes US Citizen, lawful permanent resident, refugee, or asylee. Current Boeing employees working in Puget Sound must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. Aerospace Technician and Mechanic Aptitude Virtual Job Tryout: To be considered for this position you will be required to complete a technical assessment as part of the selection process. Failure to complete the assessment will remove you from consideration. Basic Qualifications: 5+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience). Must be willing to work any shift; including days, evenings, nights, and weekends. Preferred Qualifications: FAA Airframe and Powerplant Certificate. Please note your certificate number on your resume if you are certified. 10+ years of experience with aircraft maintenance inspection on powered aircraft with military, airline or certificated repair station background in electrical systems or complex mechanical systems (e.g. hydraulics, pneumatics, heavy machinery, diesel, construction) (an A&P certificate and/or completion of A&P training at an accredited institution will count for 2 years of experience). Typical Education & Experience: High school graduate or GED preferred. Relocation: This position offers relocation based on candidate eligibility. Drug Free Workplace: Boeing is a Drug Free Workplace where post offer applicants and employees are subject to testing for marijuana, cocaine, opioids, amphetamines, PCP, and alcohol when criteria is met as outlined in our policies. Union Representation Statement: This is an hourly position governed by the International Association of Machinists (IAM-751) Collective Bargaining agreement. Shift Work Statement: This role is primarily 2nd shift; however, there may be additional shift requirements to support program objectives. Safety Sensitive Statement: This is a safety-sensitive position and is subject to Department of Transportation (DOT) random drug and alcohol testing. Total Rewards & Pay Transparency: At Boeing, we strive to deliver a Total Rewards package that will attract, engage and retain the top talent. Elements of the Total Rewards package include competitive base pay and variable compensation opportunities. The Boeing Company also provides eligible employees with an opportunity to enroll in a variety of benefit programs, generally including health insurance, flexible spending accounts, health savings accounts, retirement savings plans, life and disability insurance programs, and a number of programs that provide for both paid and unpaid time away from work. The specific programs and options available to any given employee may vary depending on eligibility factors such as geographic location, date of hire, and the applicability of collective bargaining agreements. Pay: $35.32/hour, with potential to earn up to $62.45/hour in accordance with the terms of the relevant collective bargaining agreement. Applications for this position will be accepted until Feb. 02, 2026 Language Requirements English Preferred Relocation This position offers relocation based on candidate eligibility. Visa Sponsorship Employer will not sponsor applicants for employment visa status. Shift This position is for variable shift Equal Opportunity Employer: Boeing is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic factors, military/veteran status or other characteristics protected by law.

Job Details Division: Nucor Steel Seattle, Inc. Other Available Locations: N/A Welcome to Nucor, where our unique culture sets us apart. Joining Nucor means becoming part of North America's largest steel and steel products manufacturer, offering unmatched career opportunities and stability. We are known for our innovative sustainability practices and are the continent's largest recycler. Our vibrant culture, built on personal connections and teamwork, empowers every team member with the freedom to innovate and contribute to our collective success. Experience a workplace where safety, efficiency, and meaningful personal connections define every day, enriching both our teammates and the communities we serve. Nucor supports its teammates with top-tier benefits like Medical, Dental, Vision, and Disability Insurance, 401K and Roth accounts, Profit sharing, Pay-for-performance bonuses, Paid parental leave, Tuition reimbursement, Stock program, Scholarships and more. Basic Job Functions: The Maintenance Shift Lead reports to the Maintenance Supervisor and performs skilled industrial electrical maintenance, including troubleshooting complex electrical systems and repairing machinery and equipment. This role involves working with AC/DC overhead cranes, motors, PLCs, and distribution systems, ensuring that production and auxiliary equipment are maintained to high standards. Responsibilities include conducting preventive and corrective maintenance, analyzing breakdowns to determine repair actions during downtime, and ensuring adherence to all safety policies, procedures, and housekeeping standards. Safety is the most important part of all jobs within Nucor; therefore, candidates must be able to demonstrate the ability to initiate, lead, and uphold safety policies, practices, procedures, and housekeeping standards at all times.Minimum Qualifications: Preferred Qualifications: 4-year electrical engineering degree Siemens specific PLC & HMI (WinCC) programming experience Industrial communication protocols experience (IO link, Profinet, Modbus, OPC) AC/DC overhead crane experience Industrial reheat furnace experience Experience working in industrial metal manufacturing Nucor is an Equal Opportunity Employer and a drug-free workplace