Manufacturing technician jobs in Hamilton, OH

The Pharmacy Engineering Technician 3 oversees logistics, fabrication, installation, operation, application, maintenance, and repair of mechanical and electromechanical machines, equipment, tools, motors and systems The Pharmacy Engineering Technician 3 performs advanced administrative/operational/customer support duties that require independent initiative and judgment. May apply intermediate mathematical skills. The Pharmacy Engineering Technician 3 ensures maintenance and continuous improvement of quality and industry standards, evaluates mechanical products to determine cost effectiveness and efficiency, oversees and implements prescription drug distribution equipment and recommends design modifications to eliminate malfunctions, reduce cost-to-fill, increase throughput and improve quality, performs and leads tests of related software and equipment to ensure proper operation and freedom from defects, and devises improvements to current procedures and develops models of possible future configurations. Decisions are typically focus on methods, tactics and processes for completing administrative tasks/projects. Regularly exercises discretion and judgment in prioritizing requests and interpreting and adapting procedures, processes and techniques, and works under limited guidance due to previous experience/breadth and depth of knowledge of administrative processes and organizational knowledge. Responsibilities: • Perform preventive maintenance, inspections, and repairs on electrical and mechanical equipment, devices and components. • Troubleshoot, routinely inspect equipment and electro-pneumatic controls as necessary on automated equipment. • Report to Maintenance Supervisor on equipment condition and status as necessary. • Install all new equipment including electrical, mechanical, pneumatic, electronic, and computer systems. • Maintain an extremely clean work environment. • Reduce machine downtime, improve throughput and overall performance of machines. • Maintain preventative maintenance schedules by thoroughly documenting all issues, repairs, parts used, recommendations, etc. • Must possess a sense of urgency on troubleshooting and repairing equipment for minimal downtime. • Possess excellent project/assignment completion record. • Ability to work independently. Requirements • 4-5 years of electrical/mechanical experience • POS programing knowledge • Knowledge of Allen Bradley PLCs

As a member of the Aviation Component Service Center (ACSC) Quality Team, you will partner across disciplines to drive continuous improvement and problem solving. This role offers exposure to a variety of aviation repair special processes across multiple engine lines and product types. **Job Description** **Roles and Responsibilities may include** : + **New Product Introduction** (NPI) and Management of Change facilitation + Engineering Doc Review & Approval (RSS, AC205, Routers, Planning, Data Sheets, NPI) + Obtain and toll gate new Repair Documents and Engine Service Manual / ATA subscriptions + **Operations Leader** + Provide timely resolution to cert questions + Referee Engine Manual, Quality Control Work Instructions (QCWI) and SOP interpretation + Facilitate quality event investigation and problem solving initiatives for a portion of the Combustors/Structures business + Identify and develop standard work and execute on Kaizens to improve processes + Collaborate with technical team to drive sustained process improvement + Utilize FLIGHT DECK tools to drive process improvements and make real change + **Sustainment of Regulatory Compliance** + Timely execution of audits such as Workstation Audits and Non-Conforming Material Audits + Selection and implementation of impactful surveillance on specific, targeted areas/themes + **Strategic Responsibilities** + Data mining, analysis and communication that expedites quality event and risk reduction efforts + Prepare content for strategic quality reviews/dialogues (Example: Weekly Rotating Quality Review) **Minimum Requirements** : + Bachelors degree from an accredited college or university and 3+ years of experience in a technical/manufacturing role (or a minimum high school diploma / GED with an additional 4+ years of experience in a technical/manufacturing role). **Desired Characteristics** **:** + Strong oral and written communication skills. + Demonstrated ability to analyze and resolve problems. + Ability to document, plan, market, and execute programs. At GE Aerospace, we have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Here, you will have the opportunity to work on really cool things with really smart and collaborative people. Together, we will mobilize a new era of growth in aerospace and defense. Where others stop, we accelerate. \#LI-ST1 GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** Yes GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit ****************** Job Summary The Manufacturing Technician III, (Packaging Mechanic) reports to a Supervisor or Manager on the Manufacturing floor, which supports Packaging operations. The position entails the execution of setup, changeover, repairs, and preventative maintenance for all equipment used in the production processes in various Classified/Non-Classified areas and performs the role of a Packaging Technician as needed. It requires the ability to perform mechanical and electronic troubleshooting in order to ensure optimal equipment performance. The Manufacturing Technician III will also provide basic mechanical training to Packaging Technicians and serve as a resource for the implementation of continuous improvement projects. **Night Shift position working 6p-6:30am. Working 2 nights on, 2 nights off, 3 nights on, 3 nights off and the rotation starts all over again. Job Responsibilities • Operate, monitor, troubleshoot, and perform maintenance tasks on various packaging equipment including picker, sorter, labeler, packer, checkweigher, printer, inspection equipment, palletizer, stretch-wrapper and conveyors. Work collaboratively with technical resources to resolve equipment issues as needed. • Act as a first-line technical resource for the team. Provide technical support to production technicians. Resolve equipment-related issues, including equipment start-up, machine recipe selection, recipe format set-up, critical sensor challenge, and production issues. • Proactively monitor equipment and component level conditions, and perform preventative maintenance tasks. Identify and investigate abnormal conditions and potential defects to prevent unplanned equipment downtime. • Perform technician tasks as required including start-up, equipment operation, manual packaging, batch execution, material handling, rework, cleaning, housekeeping and line clearance activities. • Operate light material handling equipment (motorized and manual pallet jacks, non-motorized lifts) as the need arises to safely move, store or deliver material to the proper location. • Monitor material quality of incoming, in-process and finished materials. Promptly escalate concerns to Lead Technician and Process Facilitator as needed. • Perform batch records, GMP documentation, and CMMS entries. Perform mathematical computation as needed. • Be familiar with job-related safety procedures and hazards including PPEs, ergonomics, LOTO, human safety, material handling, chemical handling, and spill controls. Report all discrepancies to process facilitator. • Perform work requirements in a responsible manner, in accordance with SOPs, cGMPs, and established safety and quality procedures. Other Responsibilities • Support lean activities and process improvement work such as performing 5S in the work area, participating in problem-solving, and manual tracking of performance data for OEE and process improvement analysis. • Lead Level 0 problem-solving on equipment related issues as needed. • Act as a certified OJT trainer on the team on assigned equipment or process tasks. Train and conduct evaluations on other team members for training qualifications. • Review process documents such as operational SOPs, PM procedures, forms and batch records for accuracy. Identify and provide suggestions for process improvement while maintaining quality and cGMP compliance as opportunities arise. • Execute protocols as required as a part of equipment qualification and process validation work • Be flexible and support other work areas within the Process Execution Team as needed • Perform all other assigned duties with minimal supervision under the direction of the process facilitator or designee as needed. • Acquire and maintain all required certifications and qualifications for the assigned work area • Strong mechanical and electronic knowledge and aptitude • Strong verbal and written communication skills • Capable and motivated to learn new skills and develop new capabilities on an on-going basis to contribute to the success of the Process Execution Team • Proven ability to work effectively in a team environment • Ability to interpret technical documents • Candidate should possess the ability to work in and adapt to a changing/demanding environment • Some overtime may be required with minimal advance notice to support business needs. Minimum Requirements • Prior experience in a regulated production environment, specifically responsible for equipment maintenance and performance • Must have the ability to effectively understand, read, write, communicate, and follow instructions in the English language. • Ability to lift and handle equipment change parts, tooling, and materials associated with equipment maintenance and repair Preferred Background • High school graduate, vocational school graduate or equivalent • Associate in engineering or mechanical trade school graduate preferred • Previous experience with automated equipment • Training in mechanics, hydraulics, and electronics systems • Knowledge of computerized maintenance management system such as SAP • Experience with OEE, TPM, LEAN or other Continuous Improvement methodology Sponsorship or support for work authorization, including visas, is not available for this position. Resilience is an Equal Employment Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, protected veteran status, disability status, physical or mental disability, genetic information, or characteristic, or other non-job-related characteristics or other prohibited grounds specified in applicable federal, state, and local laws. Requests for reasonable accommodation can be made at any stage of the recruitment process. Resilience offers employees a robust total rewards program including an annual cash bonus program, a 401(k) plan with a generous company match and our benefits package which is thoughtfully designed to support our employees with great healthcare (including medical, dental and vision), family building benefits, life and disability insurance, flexible time off, paid holidays, other paid leaves of absence, tuition reimbursement and support for caregiving needs. Our target base pay hiring range for this position is $24.00 - $36.50 per hour. Actual base pay is dependent upon a number of factors, including but not limited to, the candidate's geographical location, relevant experience, qualifications, skills and knowledge. Excited about Resilience and the biomanufacturing revolution? We encourage you to apply and start a conversation with one of our recruiters.

Immediate Opening for an Industrial Production Tech in the Dayton, Ohio area. 11th Hour Staffing Inc. is a family-owned-and-operated business that is passionate about recruiting, customer service, and our community. We are positioned to be your one-stop staffing resource for all your hiring & employment needs from entry-level to executive, spanning across all industries. Responsibilities: Read and follow work instructions and engineering drawings. Perform mechanical assembly, light fabrication, and electrical wiring to assemble water purification components and systems. Perform quality checks as required. Partner with engineering on troubleshooting and revisions to blueprints, as needed. Follow all safety and ergonomic programs and guidelines Maintain work area cleanliness standards and participate in 5S activities. Participate in continuous improvement activities. Other duties as assigned Qualifications: High School Diploma or Equivalent required. Experience in plumbing, to include copper piping. Demonstrated experience in mechanical and electronic assembly required. Soldering experience required. Ability to work safely in a fast-paced team environment. Ability to read and follow work instructions. Ability to read interpret engineering drawings and wire schematics. Ability to use measuring tools, small hand tools, and cutters. Strong mechanical aptitude. Schedule: Monday - Friday 8AM-5PM Pay: $20-22/hr Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. 11th Hour Staffing, Inc. is an equal opportunity employer and prohibits discrimination against employees or applicants on the basis of race, color, religion, sex, national origin, age, disability, marital status, veteran status, sexual orientation, genetic information or any other protected characteristic under applicable law protected by federal, state or local law. 11th Hour Staffing, Inc. will make a reasonable accommodation to known physical or mental limitations of a qualified applicant or employee with a disability unless the accommodation would impose an undue hardship to 11th Hour Staffing, Inc. Contact Human Resources with any questions or requests for accommodation.

A career at Resilience is more than just a job - it's an opportunity to change the future. Resilience is a technology-focused biomanufacturing company that's changing the way medicine is made. We're building a sustainable network of high-tech, end-to-end manufacturing solutions to better withstand disruptive events, serve scientific discovery, and reach those in need. For more information, please visit ****************** The Manufacturing Technician III, (Packaging Mechanic) reports to a Supervisor or Manager on the Manufacturing floor, which supports Packaging operations. The position entails the execution of setup, changeover, repairs, and preventative maintenance for all equipment used in the production processes in various Classified/Non-Classified areas and performs the role of a Packaging Technician as needed. It requires the ability to perform mechanical and electronic troubleshooting in order to ensure optimal equipment performance. The Manufacturing Technician III will also provide basic mechanical training to Packaging Technicians and serve as a resource for the implementation of continuous improvement projects. This role will be on the 2-2-3 A Shift 6am-6:30pm Primary Responsibilities • Operate, monitor, troubleshoot, and perform maintenance tasks on various packaging equipment including picker, sorter, labeler, packer, checkweigher, printer, inspection equipment, palletizer, stretch-wrapper and conveyors. Work collaboratively with technical resources to resolve equipment issues as needed. • Act as a first-line technical resource for the team. Provide technical support to production technicians. Resolve equipment-related issues, including equipment start-up, machine recipe selection, recipe format set-up, critical sensor challenge, and production issues. • Proactively monitor equipment and component level conditions, and perform preventative maintenance tasks. Identify and investigate abnormal conditions and potential defects to prevent unplanned equipment downtime. • Perform technician tasks as required including start-up, equipment operation, manual packaging, batch execution, material handling, rework, cleaning, housekeeping and line clearance activities. • Operate light material handling equipment (motorized and manual pallet jacks, non-motorized lifts) as the need arises to safely move, store or deliver material to the proper location. • Monitor material quality of incoming, in-process and finished materials. Promptly escalate concerns to Lead Technician and Process Facilitator as needed. • Perform batch records, GMP documentation, and CMMS entries. Perform mathematical computation as needed. • Be familiar with job-related safety procedures and hazards including PPEs, ergonomics, LOTO, human safety, material handling, chemical handling, and spill controls. Report all discrepancies to process facilitator. • Perform work requirements in a responsible manner, in accordance with SOPs, cGMPs, and established safety and quality procedures. Other Responsibilities • Support lean activities and process improvement work such as performing 5S in the work area, participating in problem-solving, and manual tracking of performance data for OEE and process improvement analysis. Lead Level 0 problem-solving on equipment related issues as needed. • Act as a certified OJT trainer on the team on assigned equipment or process tasks. Train and conduct evaluations on other team members for training qualifications. • Review process documents such as operational SOPs, PM procedures, forms and batch records for accuracy. Identify and provide suggestions for process improvement while maintaining quality and cGMP compliance as opportunities arise. • Execute protocols as required as a part of equipment qualification and process validation work • Be flexible and support other work areas within the Process Execution Team as needed • Perform all other assigned duties with minimal supervision under the direction of the process facilitator or designee as needed. • Acquire and maintain all required certifications and qualifications for the assigned work area • Strong mechanical and electronic knowledge and aptitude • Strong verbal and written communication skills • Capable and motivated to learn new skills and develop new capabilities on an on-going basis to contribute to the success of the Process Execution Team • Proven ability to work effectively in a team environment • Ability to interpret technical documents • Candidate should possess the ability to work in and adapt to a changing/demanding environment • Some overtime may be required with minimal advance notice to support business needs. Minimum Requirements • Prior experience in a regulated production environment, specifically responsible for equipment maintenance and performance • Must have the ability to effectively understand, read, write, communicate, and follow instructions in the English language. • Ability to lift and handle equipment change parts, tooling, and materials associated with equipment maintenance and repair Preferred Background • High school graduate, vocational school graduate or equivalent • Associate in engineering or mechanical trade school graduate preferred • Previous experience with automated equipment • Training in mechanics, hydraulics, and electronics systems • Knowledge of computerized maintenance management system such as SAP • Experience with OEE, TPM, LEAN or other Continuous Improvement methodology Sponsorship or support for work authorization, including visas, is not available for this position. Resilience is an Equal Employment Opportunity Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender perception or identity, national origin, age, marital status, protected veteran status, disability status, physical or mental disability, genetic information, or characteristic, or other non-job-related characteristics or other prohibited grounds specified in applicable federal, state, and local laws. Requests for reasonable accommodation can be made at any stage of the recruitment process. Resilience offers employees a robust total rewards program including an annual cash bonus program, a 401(k) plan with a generous company match and our benefits package which is thoughtfully designed to support our employees with great healthcare (including medical, dental and vision), family building benefits, life and disability insurance, flexible time off, paid holidays, other paid leaves of absence, tuition reimbursement and support for caregiving needs. Our target base pay hiring range for this position is $24.00 - $36.50 per hour. Actual base pay is dependent upon a number of factors, including but not limited to, the candidate's geographical location, relevant experience, qualifications, skills and knowledge. Excited about Resilience and the biomanufacturing revolution? We encourage you to apply and start a conversation with one of our recruiters.

Job DescriptionJob Purpose: Utilize production tooling; responsible for manufacturing and assembly commercial products. Follows assembly prints, guidelines and/or diagrams to ensure product specifications and tolerance levels are met. Relies on limited experience and judgment to plan and accomplish goals. Performs a variety of tasks. Works under general supervision. A certain degree of creativity and latitude is required. Reports to Manufacturing Supervisor. 2-5 years of related experience required. Key Result Areas: Manufacturing Defects Out of Box Failure Customer Satisfaction Primary Work Activities: Prepares work to be accomplished by studying assembly instructions, and parts lists Gather necessary parts, subassemblies, tools, and materials Assemble components by examining connections for correct fit; fastening parts and subassemblies Inspect equipment after assembly Maintain a safe and clean working environment Maintains supplies inventory by checking stock to determine inventory level; anticipating needed supplies; communicate to purchasing Conserves resources by using equipment and supplies as needed to accomplish job results Document actions by completing production entry and quality forms Contributes to team effort by accomplishing related results as needed. Essential Job Competencies: Customer Focused Attention To Detail: Focuses on task precision for its own sake and detail orientation as a constant standard for self and others, ensuring quality and precision in every task or project Communication Focused On Quantitative Results: Focuses on the quantity of tangible outputs produced (such as number of outputs per week) and derives personal satisfaction from accomplishing measurable outputs. Prioritizes Tasks: Prioritizes tasks to gain the greatest overall return on effort, probing for sufficient information to know the significance and urgency of a task and analyzing current priorities relative to new ones. Initiative Develops Technical Competence: Stays abreast of new developments in both the business & his/her main field to be effective inside the organization. Demonstrate leadership and commitment with respect to the quality management system by promoting improvement as it applies to their areas of responsibility. Takes Initiative In A Business Unit: Takes action on problems or opportunities and blazes new trails without prompting by others, preparing alternatives so the outcome is not jeopardized by unexpected barriers. Problem Solving Problem Solving: Objectively isolates and defines problems and takes steps to provide a solution, remaining engaged until the problem is resolved. Practical Thinking: Absorbs new information quickly and is comfortable dealing with abstract concepts and relationships, relating new information to old information to expand and refine one's frame of reference. Essential Job Skills: Operation Monitoring - Watching gauges, dials, or other indicators to make sure a machine is working properly. Critical Thinking - Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Active Listening - Giving full attention to what other people are saying, taking time to understand the points being made, asking questions as appropriate, and not interrupting at inappropriate times. Equipment Maintenance - Performing routine maintenance on equipment and determining when and what kind of maintenance is needed. Monitoring - Monitoring/Assessing performance of yourself, other individuals, or organizations to make improvements or take corrective action. Complex Problem Solving - Identifying complex problems and reviewing related information to develop and evaluate options and implement solutions. Operation and Control - Controlling operations of equipment or systems. Quality Control Analysis - Conducting tests and inspections of products, services, or processes to evaluate quality or performance. Judgment and Decision Making - Considering the relative costs and benefits of potential actions to choose the most appropriate one. Troubleshooting - Determining causes of operating errors and deciding what to do about it. Coordination - Adjusting actions in relation to others' actions. Physical Requirements / Work Environment: The physical demands/work environment described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Use their hands to handle, control, or feel objects, tools, or controls. Repeat the same movements. Use fingers to grasp, move, or assemble very small objects. Hold the arm and hand in one position or hold the hand steady while moving the arm. See details of objects that are less than a few feet away. Use one or two hands to grasp, move, or assemble objects. Use manual and powered hand tools, (electric, battery operated and/or air powered). Ability to stand or walk for long periods of time and perform repetitive motion type tasks regularly. Ability to regularly lift and/or move up to ten (10) pounds. Ability to frequently lift and/or move up to twenty five (25) pounds. Ability to occasionally lift up to fifty (50) pounds. While performing the duties of this job, the employee is regularly exposed to bending, lifting, twisting, crouching, reaching, pushing and/or pulling. Equal Employment Opportunity We are committed to providing a non-discriminatory employment environment for our employees. We intend to fully comply with applicable laws regarding non-discrimination of employment. Discrimination against employees and applicants due to race, color, religion, sex (including sexual harassment), national origin, disability, age (40 years and older), military or veteran status, or genetic information is prohibited. Anyone who violates this policy will be subject to disciplinary action up to and including termination of employment.

The Panther Group has an immediate need for a Manufacturing Technician in the Kettering, OH area. This position employs an individual for the operation of a computer-based laser machining work center. This individual's primary responsibility will be to laser process components through instructions that may be in the form of drawings and written or verbal direction. Employees must become familiar with procedures and are aided with direct supervision. This position is part of a team, and a heavy emphasis will be placed on the individual's ability to participate in a team environment. Responsibilities: Perform simple to medium complexity tasks related to customer specific process requirements. Must be able to comprehend documentation requirements. Verify system conditions or equipment status before operation. Inspect components to ensure specifications have been met. Enter data as required. Train other employees in production processes or equipment usage as requested by Supervisor. Maintain a clean and safe work area. Follows instructions of the Supervisor and/or Production Manager and conducts all work according to company policy and good safe labor practices. The use of laser radiation (non-ionizing) sources will be used only in a manner that is safe for all employees and visitors. The various wavelengths of laser light utilized will be taken into consideration in this and other personal protection policies by the laser operator. Employee must conduct themselves in a professional and appropriate manner and is responsible for maintaining a high standard of conduct and job performance. Required Qualifications: Minimum one year experience in a manufacturing environment High School Diploma or GED Good dexterity, as many jobs require the handling of many small components. Preferred Qualifications: Experience with automated or manual inspection equipment Familiarity with ISO Quality Systems particularly in medical device manufacturing. Use of optical inspection equipment. This may be defined as a magnifier, microscope, and/or equipment used for measuring capacity.?? Pay range $17.00 - $21.60 / hour depending on shift #INDENG

At Perrigo, we are driven by our mission to Makes Lives Better Through Trusted Health and Wellness Solutions, Accessible to All . We are proud to be a Top 10 player in the European Consumer Self-Care market and the largest U.S. store brand provider of over the counter and infant formula. Dedicated to providing The Best Self-Care for Everyone , we are the people behind the brands you trust. We are Opill , Compeed , Solpadeine , NiQuitin , and many more. We Are Perrigo. We are committed to enhancing the wellbeing of our colleagues and consumers alike. We pride ourselves on fostering an inclusive, collaborative culture where each person can experience a sense of belonging. Join us on our One Perrigo journey as we evolve to win in self-care. Description Overview Perrigo Company is dedicated to making lives by bringing high quality and affordable self-care products that consumers trust everywhere they are sold. Help us do it. We are currently looking for a highly motivated Manufacturing Associate who will work the Night shift from 6pm - 6am ET on a rotating 2/2/3 schedule (Week A: Mon, Tues, Fri, Sat; Week B: Sun, Weds, Thurs). This position pays between $21.00 - $22.00/hour depending upon experience + a 15% shift premium! A comprehensive benefits package including, but not limited to, health, dental, vision, 401K with match, quarterly bonus, and more is also offered by Perrigo. Scope of the Role Operates and ensures proper operation of manufacturing equipment. Conducts regular in-process checks of quality attributes of materials and products and to ensure the equipment is operating correctly. Assists in recording accurate production and inspection data and is responsible for completing manufacturing paperwork in compliance with required SOPs and cGMPs. Performs set ups, changeovers and cleans the work area throughout the shift to ensure proper clearance of materials. Continuously looks for and helps to implement improvements to the process, productivity, quality and reduce costs. Performs other related duties as assigned. Experience Required High School Diploma or Equivalency required. Must possess basic math and reading comprehension skills and be able to read, speak and comprehend instructions in English, including procedure documents, as well as proofread alpha and numeric data. Requires ability to follow standard work and Standard Operating Procedures (SOPs). Basic computer skills and the ability to navigate through computer based training systems and use in the course of daily work may be required. Must be able to communicate effectively as a member of a work team. Must meet all locally defined training requirements. Experience in a pharmaceutical, Federal Drug Administration (FDA) controlled, other controlled regulatory agencies, or Current Good Manufacturing Practices (cGMP) packaging or manufacturing environment is preferred. Required to operate and handle material handling equipment. Ability to work overtime as required. Essential Functions of the Job Physical Requirements: Consistently/Frequently - Sit, walk, lift 50 lbs., pulling and pushing, grasp, move items, feel with hand/fingers Occasionally - Stand, climb stairs/ladders, stoop/bend, squat, kneeling, twisting, reach, reach above shoulders and head Rarely - Lift above shoulders and head 25 lbs. Environmental: Consistently/Frequently - exposure to loud noises/machinery and exposure to chemicals Occasionally - exposure to hot conditions including room temperatures of 90+ degrees Fahrenheit. Other Qualities: Consistently/Frequently - see (vision), ability to see colors, hear, ability to read and write, ability to interpret information, basic math, reading and writing in English. Simple problem solving may be required to adjust process parameters based on data readouts and machine feedback and document corrections to batch records and other controlled documents using cGMP-compliant practices. Simple decision-making skills are expected to read and interpret work instructions and SOPs and then decide on appropriate courses of action based on the guidance provided. Benefits We believe our people are our greatest asset. Alongside competitive compensation, we offer benefits tailored to supporting you and your family, as well as career development opportunities to ensure you feel valued and supported, both professionally and personally. Find out more about Total Rewards at Perrigo. Hybrid Working Approach We love our offices and the setting they provide for in-person collaboration and celebration. But we also appreciate the opportunity to work remotely can energise you too, so we promote flexibility with the ability to work two days a week from home in many roles. We are proud to be included in the Forbes list of "America's Best Employers by State 2024". Find out more here Applicants please note: To apply to this position please click the APPLY button at the bottom of the application. (The SAVE button will only save your profile information but not submit an application for this open position.) Thank you. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by law. #weareperrigo

Magnum Piering in Cincinnati, OH is seeking to hire full-time Manufacturing Associates to play an essential role in our success of our manufacturing facility. This is a 40+ hour per week position with a typical schedule of Monday-Friday, 6am-4pm. If you like overtime but still like your weekends then this is the place for you! Our valued employees earn competitive compensation. We offer our team generous benefits including medical, dental, a 401(k) plan, paid vacation, and holiday pay. We also provide company uniforms and boots. If this sounds like the opportunity for you, apply today! ABOUT MAGNUM PIERING Magnum Piering has been designing and manufacturing high-quality foundation repair products for almost four decades. We are proud to be one of the first foundation repair systems manufacturers in the U.S. The leader in deep foundation design and manufacturing, Magnum Piering's products are specified by engineers across the U.S. and Canada and are installed by qualified contractors. Since 1981, Magnum's products and installing contractors have withstood the most important test of all ' the test of time. We know that we owe our success to our great team. This is why in addition to great pay and excellent benefits, we offer growth potential and job security. We want our team to succeed which is why our supervisors are on the floor with our employees to assist them. As a family-owned business, we offer our team a good work-life balance and a fun work environment. A DAY IN THE LIFE OF A MANUFACTURING EMPLOYEE As a manufacturing employee, you are responsible for safely operating machinery and equipment to create quality steel parts. You will safely load and unload raw steel materials into machinery by hand, forklift, or crane depending on department. Carefully follow work instructions and inspect finished parts to ensure quality. You will be cross-trained in other areas and equipment. QUALIFICATIONS Ability to lift 50 lbs Must be at least 18 years of age Ability to pass a pre-employment drug test Prior manufacturing experience a plus but not required Great attitude and willingness to work We are an Equal Opportunity Employer.

Thank you for your interest in becoming part of the team at Legrand! GENERAL PURPOSE This position is responsible for safely operating various machining, production, and assembly operations per work assignment description to produce high quality manufactured parts or assembled production. This position will have the ability to set up or make minor adjustments to various machines. Work assignments will be scheduled based on training proficiency. DUTIES AND ACCOUNTABILITIES According to work assignment description and scheduling, correctly setup and operate various machines, follow the production and quality procedures following prints and checking materials for defects, maintain production materials, inspect product to ensure high quality. Able to run various different types of equipment. Perform minor adjustments and daily maintenance to equipment Participate on Continuous Improvement Teams Provide training to other associates as needed Basic or routine troubleshooting Able to operator material handling equipment: (Forklift, Stand Behinds, Trucks) if necessary Ability to work with minimal supervision Conduct machine and production changeovers as required Certified to operate various workstations/positions within the facility to meet production needs Inspect measurements and product to ensure quality and accuracy Transport the product to the correct location when completed Update all completed work in the correct system per the schedule Ability to understand and execute verbal instructions regarding duties to be performed Ability to perform and demonstrate all manufacturing procedures after training. Assist with other duties within the department and/or other work stations/departments when necessary Complete clean-up responsibilities and maintain work station according to 5S procedure Demonstrate our five core values of Integrity, Customer Responsiveness, Innovation, Passionate Contribution & Empowerment and Continuous Improvement Understand workplace hazards and take steps to proactively prevent and report hazards or injuries in the workplace. Cooperate in safety programs, initiatives, and investigations Perform other duties deemed necessary to support the Company's business operations JOB REQUIREMENTS Essential Knowledge, Skills and Abilities Required: Ability to read, write and speak English fluently Demonstrated ability to use and interpret measurement tools such as tape measure, micrometers and calipers Ability to read and interpret assembly drawings, blueprints, BOM's and associated procedures Ability to follow directions and work with minimal supervision Flexibility and willingness to adapt to frequently changing priorities/tasks Demonstrated mechanical aptitude Basic math skills and problem solving skills Ability to operate some or all of the following types of equipment: Presses, Laser Turret, Welder, Table Saws, Edgers, Paint Sprayers, Mills and other Manufacturing Equipment as needed Ability to identify and communicate basic process improvements Must possess high level of attention to detail Works well in a Team Environment Capability to Train others Ability to work well in a team environment Provide training to other associates The ability to make decisions on imperfect information The ability to multitask and bias towards actions Proven reliability - attendance and punctuality Must understand basic lean principles - 5S, Kanban Ability to use the following hand tools: drills, screw drivers, hammers, etc Minimum Education and Experience: High school diploma or GED preferred. 2 years of previous experience in operating specific specialized equipment outside of Milestone or 2 years of demonstrated experience operating a variety of different types of machinery. WORKING CONDITIONS/PHYSICAL DEMANDS While performing the duties of this job, the employee is required to stand for 8 hours/day while making coordinated movements of the hands and fingers to grasp/pinch, and manipulate objects. This may include frequent use of vibrating/pneumatic tools, overhead and outstretched reaching with arms, bending/twisting/stooping, kneeling/squatting and frequently lifting/carrying up to 70 lbs throughout the day and occasionally up to 75lbs as needed. Also may occasionally include pushing/pulling up to 100 lbs. May occasionally be exposed to dust and spray fumes. Regular shop assembly/distribution center environment (no air conditioning) Steel-toed shoes are required for working in this position. Note: Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job at any time. Milestone is proud to be an Equal Opportunity Employer. You will be considered for this position based upon your experience and education, without regard to race, color, religion, age, sex, national origin, sexual orientation, ancestry; marital, disabled or veteran status. We are committed to creating and maintaining a workforce environment that is free from any form of discrimination or harassment. If you'd like to work in a fun, creative, business-casual environment that offers a comprehensive benefit package, we encourage you to apply! Legrand is an equal employment opportunity employer. For California residents, please see the link for the Privacy Notice for Candidates. California law requires that we provide you this notice about the collection and use of your personal Information.

**!!!Starting Wages from $21.00 to $24.00 per hour!!!** **Who We Are, and What We Do:** At **Corteva Agriscience** , you will help us grow what's next. No matter what your role, you will be part of a team that is building the future of agriculture - solving the world's food problems through innovation, technology, and putting people first. We are currently seeking a **Production Technician** to join our team at our **Rushville, Indiana production facility** . If you have a passion for providing solutions and supporting a high-performing team, this is a terrific opportunity for you! The Rushville production location runs various production schedules during peak season months ( **September through March** ) each year. **This includes but is not limited to the following:** + Up to three (3) shifts per week, which will be between **8-to-10-hour shifts** + 5-6 days per week, with 1-2 days off, rotating shifts + **Premium Shift Bonus Provided!** During off-peak months **(April through August)** the site works an 8-hour day shift schedule with occasional overtime when needed. This provides a much better work-life balance than other manufacturing roles and opportunities! **What You Will Do:** + Model Safety as the number one focus + 100% safety steward of a designated program + Seed corn harvest activities such as receiving, husk/sort, drying, shelling, and bulk operations + Process activities such as color sorting, sizing, gravity table, treating, packaging, and palletizing operations + Use of automation and computerized systems to perform work tasks (PLC, computers, and iPads) + Return and rework activities + Monitor product quality and ensure activities meet the requirements of the quality plan. + Warehousing activities including forklift operation, quality sampling, picking and pooling activities + Data collection for continuous improvement projects that are driven from Bottoms Up Planning + Facility and equipment maintenance task assignments + Various other duties as assigned by supervisor **Education:** + You have your High School Diploma/GED **OR** are willing and able to obtain your GED within twelve (12) months of hire as a condition of employment **What Skills You Need:** + You are safety minded! You value the safety of yourself and your co-workers and will eagerly participate in safe work practices, on-the-job safety, and work safety programs + You love variety of tasks, enjoy working hard and staying busy! + You possess good written, verbal, and interpersonal communication skills with the ability to communicate effectively with internal and external customers + Growing your skills and your career is extremely important to you and you are looking for a company like Corteva where you can do just that! + You are solutions focused! When you see a problem, you look for a way to fix it! + You have a valid US Driver's License + You are willing and able to do the following with or without reasonable accommodation: Climb and/or work in elevated areas, Stand and sit for extended periods, work outdoors and indoors in hot, cold, wet, and dry conditions, lift up to fifty (50) lbs., and perform work that involves repetitive motion and lifting + You are comfortable with technology and possess good a computer aptitude including the use of Microsoft Applications (Outlook, Word, Excel, PowerPoint, etc.), and are willing and able to learn other company specific applications as required + You uphold health and safety to the highest standard! You consistently help others and demonstrate adherence to safety protocols, policies, and procedures to ensure you and your colleagues go home safely every day + You understand that delivering to our customers on-time keeps us viable and are willing and able to work a rotating shift and overtime hours, which include nights and weekends during seasonal peaks to support production demand **What Makes You Stand Out:** + Two-Year Technical or Associates Degree + You have one (1) year of education and/or experience in operations, manufacturing, agriculture, or related industry + Knowledge or experience with LEAN Manufacturing principles such as 5S, Continuous Improvement and Standardized Work + General knowledge and/or experience with field and/or agriculture equipment (plows, tractor, forklift, etc.) **Work Authorization and Relocation:** + VISA Sponsorship is **NOT** available for this position + This position does **NOT** offer a comprehensive domestic relocation benefit package **Site Dedicated (100% at Corteva location):** + This role will be on-site at our Corteva location See what it's like to work at our Seed Production locations, please visit : ************************************************************************** **Benefits - How We'll Support You:** + Numerous development opportunities offered to build your skills + Be part of a company with a higher purpose and contribute to making the world a better place + Health benefits for you and your family on your first day of employment + Four weeks of paid time off and two weeks of well-being pay per year, plus paid holidays + Excellent parental leave which includes a minimum of 16 weeks for mother and father + Future planning with our competitive retirement savings plan and tuition reimbursement program + Learn more about our total rewards package here - Corteva Benefits (******************************************************************************* + Check out life at Corteva! ************************************* Are you a good match? Apply today! We seek applicants from all backgrounds to ensure we get the best, most creative talent on our team. Corteva Agriscience is an equal opportunity employer. We are committed to embracing our differences to enrich lives, advance innovation, and boost company performance. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, military or veteran status, pregnancy related conditions (including pregnancy, childbirth, or related medical conditions), disability or any other protected status in accordance with federal, state, or local laws. Corteva Agriscience is an equal opportunity employer. We are committed to boldly embracing the power of inclusion, diversity, and equity to enrich the lives of our employees and strengthen the performance of our company, while advancing equity in agriculture. Qualified applicants will be considered without regard to race, color, religion, creed, sex, sexual orientation, gender identity, marital status, national origin, age, veteran status, disability or any other protected class. Discrimination, harassment and retaliation are inconsistent with our values and will not be tolerated. If you require a reasonable accommodation to search or apply for a position, please visit:Accessibility Page for Contact Information For US Applicants: See the 'Equal Employment Opportunity is the Law' poster. To all recruitment agencies: Corteva does not accept unsolicited third party resumes and is not responsible for any fees related to unsolicited resumes.

Job Title: Pharmaceutical Production Technician Pay Rate: $23.00 to 24.00/hour Reports To: PET Facility Manager PharmaLogic is the fastest-growing SPECT & PET radiopharmaceutical solutions provider and contract development and manufacturing organization (CDMO) with radiopharmacies across North America. We are passionate about expanding the power of radiopharmaceutical technology to provide transformative diagnostic and therapeutic agents to patients from bench to bedside. PharmaLogic offers you an exceptional opportunity to join our dynamic team as a Pharmaceutical Production Technician! The hours are 11pm to 7am. 40 hours per week. $23.00 to $24.00/hour + Benefits Job Overview: As a Pharmaceutical Production Technician at PharmaLogic, you will play a vital role in the production and QC of PET radiopharmaceuticals in compliance with applicable safety, quality, and regulatory requirements. The position involves maintenance and repairs of some equipment such as chemistry modules and analytical equipment. You will be expected to assist in facility maintenance, system repairs, PMs, and system modifications to increase your expertise and ensure system reliability. Job Responsibilities and Duties: Operate cyclotron for PET production. Perform maintenance and repairs on synthesis modules and analytical equipment. Perform PET radiopharmaceutical production and Quality Control (QC) in cGMP environment. Responsible for routine production, packaging and shipping of radioisotopes. Ensure compliance with all regulatory commitments and company policies and procedures including cGMP and radiation safety. Maintain records to comply with FDA requirements. Order parts and supplies for maintenance and production. Clean and maintain production areas (hot cells, laminar flow hoods, etc.). Other related duties as assigned. Job Requirements │ Skills │ Education: Academic background in physics, chemistry, engineering, or electronic technology; or completion of training at an advanced military electronics school; or an equivalent combination of education and experience. Experience in electrical, mechanical engineering, Physics, medical equipment services or equivalent. Pharmacy tech certification a plus. Experience working with ionizing radiation and radioactive equipment. Experience troubleshooting, performing repairs and maintaining equipment. Strong analytical, troubleshooting and customer service skills. Working knowledge of cGMP environment and regulations. Physical and Intellectual Requirements: Manual dexterity for manipulating small items; regularly lift at least 50 pounds throughout each shift and to be able to lift 75 pounds on occasion. Able to handle standing, walking and sitting for 4+ hours with limited rest intervals; good eye-hand coordination; fair eyesight (with or without correction lenses); normal hearing in at least one ear (hearing range of 20 Hz to 20 kHz); ability to analyze situations, set priorities and meet deadlines while maintaining attention to detail in a fast-paced and dynamic environment; effective organizational skills; a commitment to continuous learning; an ability to work well both independently and as part of a team. Come join our winning team and begin a fulfilling career with us by applying today. PharmaLogic is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status, or any other protected class. Benefits Include: 401(k) retirement benefit program Medical Dental care Disability insurance Employee assistance program Extended health care Life insurance Paid time off Vision care 11 pm to 7 am 40 hours per week

Location: Lebanon, OH Employment Type: 1st Shift, Full-time, direct hire Job Brief Kable Workforce Solutions is hiring a Mechatronics Technician for our client. This role designs, develops, and tests machinery and tools; troubleshoots and repairs equipment; fabricates or modifies special tools and fixtures; conducts cost assessments and validations; and supports plant-wide continuous improvement initiatives.What's a Typical Day Like? Plan and implement projects to improve production methods and equipment performance. Design, develop, and test machinery and tools. Troubleshoot and repair equipment issues. Modify or create special tools and fixtures as needed. Conduct cost assessments and validations for projects. Support continuous improvement initiatives in the plant. Provide technical assistance for production equipment. Inspect and assess parts for dimensional accuracy. Adjust, test, and operate equipment for optimal performance. Use metalworking tools (lathe, drill press, mill, grinder) for part fabrication and repair. Initiate purchase orders for necessary parts and machines. What Are the Requirements of the Job? Associate's degree in a technical field preferred OR 10+ years of relevant experience. Strong ability to read blueprints and technical documents. Experience with PLC and CNC programming and troubleshooting. Knowledge of electrical/electronic circuits, hydraulics, pneumatics, and welding (stick, MIG, TIG). Understanding of machine control circuits and schematics. Familiarity with plumbing, pumps, and various piping materials. Ability to work in a team and contribute to process improvements. Ability to work in fast-paced environment. Ability to move or lift up to 50+ lbs. Ability to reach, grasp, hold, push, pull, bend, twist, squat, climb, kneel. Ability to utilize hand/eye coordination. Capability to stand for prolonged periods of time Communication skills. How to Apply And Next Steps? Please submit your resume in our application by clicking “apply now.” We look forward to reviewing your application and you will hear from us within 1 business day.About Kable Workforce Solutions For over 50 years, Kable Workforce Solutions has been connecting skilled professionals with leading employers across the region. We're dedicated to helping people build lasting careers and helping companies grow through quality, integrity, and partnership.We believe in people first - empowering individuals to succeed and celebrating the work that drives our communities forward.Kable Workforce Solutions is proud to be an equal opportunity employer. We welcome and value diversity and are committed to creating an inclusive workplace where everyone can thrive. Read our full diversity statement here.This job description is not intended to be all-inclusive, and the employee will also perform other reasonably related business duties as assigned by the immediate supervisor and other management as required.

The Production Technician is responsible for all aspects of plant processing from post-crop harvest through packaging and labeling of the final product ready for customer sale as outlined by the management team and SOPs. These responsibilities include post-harvest tasks including the drying and curing stage all the way through trimming, packaging, and labeling the product. This position works in a timely manner and strives to increase productivity and acts with professional regard to the management and use of all production facilities and processing equipment. Major Areas of Responsibility include: Assists in the post-harvest plant processing of cannabis. Fan leaf removal, harvest, drying, trimming, curing, weighing, packaging, labeling, recording, and inspection of product in addition to cleaning and sanitation. Maintains a clean and organized work environment. Transport harvested plants to drying room and hang to be dried. Hand trims and/or operates a trimming machine to remove excess plant material. Weighs, records, and shreds plants waste and adds a non-cannabis medium for compliant disposal. Receives instructions and assists on tasks as delegated by management team. Works in a quick and efficient manner. Complies with all HR policies including confidentiality and non-disclosure. Minimum Qualifications (Skills, Knowledge & Abilities): All applicants must be at least 21 years of age. 1-3 years of experience in production position; including hands-on production activities. General knowledge of weights and measurement. Evening/night/weekend work may be required. Speed and precision with equipment and attention to detail. Ability to multi-task and maintain work consistency on a daily basis. High attention to detail. Standing/sitting for long periods of time. Travel %: 0 FLSA status: Non-exempt Additional Abilities Required: Exposure to pollen, dust, and plant particles due to the handling of raw plant materials. The job requires physical activity, including prolonged sitting, standing, repetitive bending, climbing, and lifting or moving up to 50 pounds (or more with a coworker). Good visual acuity, hand-eye coordination, manual dexterity, and ability to perform repetitive motions with accuracy is required. The noise level in the work environment is usually moderate. Note: Nothing in this job description restricts the company's right to assign or reassign duties and responsibilities to this position at any time. Reasonable accommodations may be made in appropriate circumstances to enable individuals to perform the essential functions of the positio n. About The Cannabist Company (f/k/a Columbia Care) The Cannabist Company, formerly known as Columbia Care, is one of the most experienced cultivators, manufacturers and providers of cannabis products and related services, with licenses in 14 U.S. jurisdictions. The Company operates 89 facilities including 70 dispensaries and 19 cultivation and manufacturing facilities, including those under development. Columbia Care, now The Cannabist Company, is one of the original multi-state providers of cannabis in the U.S. and now delivers industry-leading products and services to both the medical and adult-use markets. In 2021, the Company launched Cannabist, its retail brand, creating a national dispensary network that leverages proprietary technology platforms. The company offers products spanning flower, edibles, oils and tablets, and manufactures popular brands including dreamt, Seed & Strain, Triple Seven, Hedy, gLeaf, Classix, Press, and Amber. For more information, please visit ************************

Reporting to the Quality Manager (QM), the Quality Technician (QT) will be responsible for supporting Quality Engineers in the implementation and maintenance of work instructions and procedures created to meet customer requirements. Will be supporting and leading by example in the building and maintenance of a "culture of quality" across the organization. Will work as part of a team to assure all requirements are met and are up to standards to support our goals of quality, cost and delivery. Responsible for supporting Meyer Tool's Quality Management System objectives of Quality, Cost and Delivery by processing non-conforming hardware, gathering and submitting customer required data and reviewing documentation. The QT will be responsible for ensuring conforming disposition and safe shipment of customer hardware. This position works closely with all job functions in the organization as well as external customers to ensure all aspects of part quality are met. Primary Responsibilities: 1. Process non-conforming hardware, preparing deviation reports by collecting, analyzing, and summarizing data and trends; entering data and generating reports and presentations. 2. Work closely with Quality Engineers on projects and quality implementations as well as root cause analysis on non-conformances to identify root cause and prevent reoccurrence 3. Gather and submit customer required data prior to shipment, such as eQNs, FAIRs, and C of Cs 4. Keeps track of deviation precedence to streamline review procedures and customer disposition 5. Supports Quality Engineering in development, changes, review and approval of internal work instructions 6. Submit metallurgical samples for laboratory review as necessary 7. Support over-inspection and shipment needs as required to meet customer demands 8. Participate in Continuous Improvement projects 9. Assist the Quality Manager, as needed, with RCCA investigations and information collection 10. Perform miscellaneous duties and projects as assigned and required 11. Must be able to work required hours to ensure delivery of customer product (May require flexible scheduling for training period and to meet customer demands). Requirements: * 1 year experience in a manufacturing environment * Must meet ITAR definition of US Person(s) * Must have HS diploma or equivalent * Ability to process and communicate information using Microsoft Office software * Must be able to work in a team environment and prioritize multiple tasks effectively * Sound analytical problem-solving skills, process troubleshooting skills * Willingness to immediately receive SAE DPRV training and DQR training as required * Excellent verbal and written communication skills * Strong interpersonal and leadership skills * Ability to follow instructions and communicate information to others both verbally and in writing in English * 20/25 vision (natural or corrected) * Must be able to use standard gauges: micrometers, height gauges, calipers etc. * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Preferable Experience: * Understanding of quality systems such as AS9100, ISO and NADCAP * Ability to interpret engineering drawings and/or models * Knowledge of root cause analysis tools such as 5 Whys, Failure Mode and Effects Analysis, Pareto Analysis, Six Sigma and/or equivalent quality training * Associates Degree in relevant field * 2 to 5 years of quality experience in aerospace or industrial gas turbine industry * SPC (Minitab) experience desired * MPCS experience Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand and move throughout the facility. Will use hands, frequent stretching, climbing, pushing, pulling, crouching, stooping, reach with hands and arms, and communicate. Work in manufacturing environment and use of computer (typical 2-button scroll mouse and keyboard - 80% of the work day). The employee must frequently lift or move up to 50 pounds. The noise level in the work environment may be loud. Must be able to use required PPE. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit your resume noting job inquiry #3291230925 to the Human Resources Department at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

Job Description AmeriWater is a long-established industry leader in the design, manufacture, installation and supply of water purification systems and services for dialysis, industrial and healthcare applications. We are looking for a Production Technician to join our growing team in Dayton, Ohio! Position Summary Responsible for the complete assembly of water purification systems and components. Assembly operations include mechanical assembly of components using small hand tools, measuring and cutting to length tubing and bulk supplies, and installation of electronic controls. Primary Responsibilities Read and follow work instructions and engineering drawings. Perform mechanical assembly, light fabrication, and electrical wiring to assemble water purification components and systems. Perform quality checks as required. Partner with engineering on troubleshooting and revisions to blueprints, as needed. Follow all safety and ergonomic programs and guidelines Maintain work area cleanliness standards and participate in 5S activities. Participate in continuous improvement activities. Other duties as assigned Requirements Education & Experience High School Diploma or Equivalent required. Demonstrated experience in mechanical and electronic assembly. Skills & Attributes Ability to work safely in a fast-paced team environment. Ability to read and follow work instructions. Ability to read interpret engineering drawings and wire schematics. Ability to use measuring tools, small hand tools, and cutters. Strong mechanical aptitude. Work Environment Regular exposure to a manufacturing environment including noise, machinery, and varying temperatures. Benefits 401(k) 401(k) matching Health insurance Dental insurance Vision insurance HSA with Employer Contribution Employee assistance program Life insurance Short-term and Long-term Disability Paid time off AmeriWater is an Equal Opportunity Employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. AmeriWater is an E-Verify Program participant.

Layup Production Technician Job Description CTL Aerospace is a full service NADCAP certified composite-manufacturing company providing services to the major aerospace and governmental organizations since 1946. CTL specializes in the manufacturing of Fiber Reinforced Polymer Structures. We are seeking talented professionals to work in a fast-paced, team oriented environment as a Layup Technician at our northern Cincinnati, Ohio location (less than 30 minutes from Dayton and/or northern Kentucky). Job Requirements Assembly & Disassembly of part molds without damaging them. Part mold cleaning and preparation. Read and understand manufacturing plans pertaining to Layup operations. Obtain material kits from stockroom. Apply materials to molds per manufacturing plans. De-mold cured laminates from molds. Bag parts for cure. Job Qualifications U.S. Citizen or Green Card Holder HS Graduate or GED Ability to interact with people on the shop floor, good social skills, and able to work with diverse work groups. Must have excellent communication skills Strong attention to detail. Must be able to work in a manufacturing environment Able to lift 50 lbs. and stand for long periods of time. Must be able to cross train and work overtime as business needs require. CTL Aerospace will provide a pay rate commensurate with experience and an excellent benefits package. To learn more about our company, please visit **************************** CTL Aerospace is an EEO/M/F/Disability/VET and Drug Free Employer Veteran Founded Small Business

Company DescriptionJobs for Humanity is partnering with FIS to build an inclusive and just employment ecosystem. Therefore, we prioritize individuals coming from the following communities: Refugee, Neurodivergent, Single Parent, Blind or Low Vision, Deaf or Hard of Hearing, Black, Hispanic, Asian, Military Veterans, the Elderly, the LGBTQ, and Justice Impacted individuals. This position is open to candidates who reside in and have the legal right to work in the country where the job is located. Company Name: FIS Position Type : Full time Type Of Hire : Experienced (relevant combo of work and education) Education Desired : Bachelor of Computer Science Travel Percentage : 1 - 5% GENERAL DUTIES & RESPONSIBILITIES • Manages global incidents across multiple data center environments to protect production systems critical to business success. • Ensures contractual service level agreements are met in support of client and company mission-critical business requirements. • Works across a wide array of product lines and engages various levels of management on a day to day basis. • Develops, coordinates and promotes incident and problem management activities across the entire enterprise and takes responsibility for effective functioning of these processes across organization. • Provides immediate response and coordination aimed at minimizing the duration of service interruptions. • Makes decisions regarding real-time incident resolution activities and selecting client situations for executive & management escalation updates. • Acts as a liaison between the business and technology teams for high severity incidents (priority 1 and 2 spanning across the entire enterprise and escalates as appropriate. • Maintains trend data and metrics related to incidents and problems for clients and executive reporting. • Recommends and documents departmental standards and procedures. • Consults with other teams on proper integration and correlation of the incident and problem management process and their respective areas. • Ensures effective and rapid response to major incidents. • Reviews and recommends, as appropriate, changes to support processes to ensure continuous improvement of the incident and problem management process. • Facilitates daily, weekly and monthly tactical meetings as well as creates incident reports as determined by business and technology needs. • Compiles the enterprise post incident report and works with various teams in root cause analysis process to determine cause of incident. • Other related duties assigned as needed. EDUCATION REQUIREMENTS Bachelor's Degree in computer science, business or communication or the equivalent combination of education, training, or work experience. GENERAL KNOWLEDGE, SKILLS & ABILITIES • Considerable knowledge of incident and problem management principles, procedures and techniques • Considerable knowledge of standards and best practices relevant to the information technology industry, e.g., ITIL) • Strong knowledge of issue resolution and escalation practices • Knowledge of FIS products and services • Broad knowledge of IT infrastructure • Ability to apply analysis and creative thinking when solving problems and conflict • Ability to provide acute attention to detail • Ability to communicate effectively to all levels within the organization • Ability to manage multiple incident tasks simultaneously • Conflict resolution and facilitation skills • Decision making ability within specified parameters • Independent and collaborative decision making • Skilled at identifying and implementing process improvements • Ability to effectively establish and maintain relationships across the organization • Excellent written communication skills • Solid business acumen and an awareness of business implications of decisions • Demonstrated skill in timely, proactive, responsive follow-through on deliverables • Ability to organize tasks and priorities effectively and under minimal supervision • Proven ability to function in an environment that requires flexibility, good judgment and sound decision-making often based on limited information and/or under extreme conditions FIS JOB LEVEL DESCRIPTION Expert professional role. Highly skilled, demonstrates extensive proficiency and expert skill set. Works independently, with a high to complete level of independent judgment. Able to effectively manage all incidents with a focus on crisis management. Compose internal communications to all levels of management while conveying the appropriate level of urgency, including executive and upper management updates. Strong understanding of the organization, with established relationships with key technical and managerial resources. Serves as an internal expert in directing other teams during critical incidents. Implement and effectively leveraging incident and problem processes across data centers or business areas without prior knowledge of said processes. Acts as a team lead on behalf of management. Represents incident and problem processes to auditors, internal partners and external clients. Typically requires a minimum of eight years related experience in production support, quality assurance, or incident management. . Privacy Statement FIS is committed to protecting the privacy and security of all personal information that we process in order to provide services to our clients. For specific information on how FIS protects personal information online, please see the Online Privacy Notice. EEOC Statement FIS is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, marital status, genetic information, national origin, disability, veteran status, and other protected characteristics. The EEO is the Law poster is available here supplement document available here For positions located in the US, the following conditions apply. If you are made a conditional offer of employment, you will be required to undergo a drug test. ADA Disclaimer: In developing this job description care was taken to include all competencies needed to successfully perform in this position. However, for Americans with Disabilities Act (ADA) purposes, the essential functions of the job may or may not have been described for purposes of ADA reasonable accommodation. All reasonable accommodation requests will be reviewed and evaluated on a case-by-case basis. Sourcing Model Recruitment at FIS works primarily on a direct sourcing model; a relatively small portion of our hiring is through recruitment agencies. FIS does not accept resumes from recruitment agencies which are not on the preferred supplier list and is not responsible for any related fees for resumes submitted to job postings, our employees, or any other part of our company. #pridepass

Full-time Description OBJECTIVE: The Extrusion Production Technician is responsible for prepping and operating machinery used to produce plastic profile products in a manufacturing environment. Key functions include determining the proper forms, lengths, and diameters for production, prepping extruding machinery, sorting materials, and operating equipment. Technicians must also install, connect, test, and adjust equipment as needed. SHIFT DIFFERENTIAL: $1.25/HR for the third shift position. ESSENTIAL FUNCTIONS: *Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.* Ability to follow instructions and production requirements; attention to detail; concentration. Capable of multi-tasking in a fast-paced environment. Able to act quickly when a problem arises; solve problems and make decisions as needed. The capacity to identify opportunities for improvement and make constructive suggestions for change. Follow all safety and work rules. Read and comprehend written process procedures, shadowgraphs, S.P.C. instructions, and problem-solving guidelines to improve processes and meet production requirements. Clean tooling and verify equipment is working correctly. Checking parts for product quality and ensuring the process is compliant with occupational regulations. Train extrusion support personnel in quality and job requirements. Accurately assemble, disassemble, clean, and polish tooling. Safely handle hot tooling required in machine set-ups, tear downs, and normal machine operations. Evaluate shadowgraphs to recommend tooling improvements to meet profile specifications. Record and maintain accurate production records, which include input of daily production rates/hours and input. Operate and interpret manual and computerized gauges to verify that quality products are being produced. Notify supervision of non-conforming conditions. Must be continuous and regular in attendance. Safely operate a forklift when necessary. Run extrusion processes to standardize scrap rates/start-up, shutdown, and set-up time frames and procedures. Identify labeling products using a bar code system. Evaluate production tooling to recommend repair or improvement. Assist in the training of extrusion production technician trainees. Must be flexible to work any shift to assist in training and maintaining customers' expectations. Aid Project Engineer in new product development. Participate in team meetings and team development areas. Interface with internal customers regularly. Any improvements that support the well-being and advancement of MCI, its employees, and the community. Ability to work overtime as needed on short notice. Effectively achieves results that meet business and individual objectives. Perform other job-related duties and responsibilities that may be assigned. Ability to exercise good judgment and professionalism at all times. Ability to coordinate and assist with day-to-day production functions. Basic computer skills and experience, including but not limited to Microsoft Office, Microsoft Outlook, and additional ERP systems experience a plus. SUPERVISORY RESPONSIBILITY: This position has no supervisory responsibilities. WORK ENVIRONMENT: This job operates in a manufacturing environment. While performing the duties of this job, the employee may be exposed to fumes or airborne particles, moving mechanical parts, and vibration. The noise level in the manufacturing environment and job sites can be loud. The manufacturing work environment is not temperature-controlled controlled and the employee may be exposed to high-heat work conditions. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear, stand, walk, use hands to finger, handle, or feel: reach with hands and arms, and stoop, kneel, crouch, or crawl. The employee must occasionally sit, climb or balance, lift, push, pull, and/or move up to 100 pounds. The employee will routinely lift, push, pull, and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. TRAVEL: No travel is expected for this position. EDUCATION AND EXPERIENCE: High School Diploma/General Education Diploma (GED), or equivalent combination of education, training, and experience. Minimum of 1-3 years of experience in an ISO manufacturing environment; and/or demonstrated knowledge, skills, and abilities to perform the above-mentioned essential functions. Minimum of 1-3 years of experience working with and operating manufacturing machinery (set-up, tear-down, and troubleshooting) is a plus. FUNCTIONAL/TECHNICAL KNOWLEDGE, SKILLS & ABILITY: Strong written, verbal, and interpersonal communications skills, including the ability to listen attentively, communicate information clearly and effectively, and the ability to work directly and indirectly with other staff members. Act as a member of a team OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. EEO/DFWP/AAP STATEMENT: Meteor Creative North America is an equal opportunity (EOE) /drug-free workplace (DFWP) employer. The physical demands and environmental characteristics described are representative of those that must be met by an employee to successfully perform the essential functions of this job. Salary Description $20